Commit | Line | Data |
---|---|---|
669a5db4 JG |
1 | /* |
2 | * pata_sis.c - SiS ATA driver | |
3 | * | |
4 | * (C) 2005 Red Hat <alan@redhat.com> | |
5 | * | |
6 | * Based upon linux/drivers/ide/pci/sis5513.c | |
7 | * Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org> | |
8 | * Copyright (C) 2002 Lionel Bouton <Lionel.Bouton@inet6.fr>, Maintainer | |
9 | * Copyright (C) 2003 Vojtech Pavlik <vojtech@suse.cz> | |
10 | * SiS Taiwan : for direct support and hardware. | |
11 | * Daniela Engert : for initial ATA100 advices and numerous others. | |
12 | * John Fremlin, Manfred Spraul, Dave Morgan, Peter Kjellerstedt : | |
13 | * for checking code correctness, providing patches. | |
14 | * Original tests and design on the SiS620 chipset. | |
15 | * ATA100 tests and design on the SiS735 chipset. | |
16 | * ATA16/33 support from specs | |
17 | * ATA133 support for SiS961/962 by L.C. Chang <lcchang@sis.com.tw> | |
18 | * | |
19 | * | |
20 | * TODO | |
21 | * Check MWDMA on drives that don't support MWDMA speed pio cycles ? | |
22 | * More Testing | |
23 | */ | |
24 | ||
25 | #include <linux/kernel.h> | |
26 | #include <linux/module.h> | |
27 | #include <linux/pci.h> | |
28 | #include <linux/init.h> | |
29 | #include <linux/blkdev.h> | |
30 | #include <linux/delay.h> | |
31 | #include <linux/device.h> | |
32 | #include <scsi/scsi_host.h> | |
33 | #include <linux/libata.h> | |
34 | #include <linux/ata.h> | |
4bb64fb9 | 35 | #include "sis.h" |
669a5db4 JG |
36 | |
37 | #define DRV_NAME "pata_sis" | |
2e413f51 | 38 | #define DRV_VERSION "0.5.1" |
669a5db4 JG |
39 | |
40 | struct sis_chipset { | |
1626aeb8 TH |
41 | u16 device; /* PCI host ID */ |
42 | const struct ata_port_info *info; /* Info block */ | |
669a5db4 JG |
43 | /* Probably add family, cable detect type etc here to clean |
44 | up code later */ | |
45 | }; | |
46 | ||
7dcbc1f2 JJ |
47 | struct sis_laptop { |
48 | u16 device; | |
49 | u16 subvendor; | |
50 | u16 subdevice; | |
51 | }; | |
52 | ||
53 | static const struct sis_laptop sis_laptop[] = { | |
54 | /* devid, subvendor, subdev */ | |
55 | { 0x5513, 0x1043, 0x1107 }, /* ASUS A6K */ | |
56 | /* end marker */ | |
57 | { 0, } | |
58 | }; | |
59 | ||
60 | static int sis_short_ata40(struct pci_dev *dev) | |
61 | { | |
62 | const struct sis_laptop *lap = &sis_laptop[0]; | |
63 | ||
64 | while (lap->device) { | |
65 | if (lap->device == dev->device && | |
66 | lap->subvendor == dev->subsystem_vendor && | |
67 | lap->subdevice == dev->subsystem_device) | |
68 | return 1; | |
69 | lap++; | |
70 | } | |
71 | ||
72 | return 0; | |
73 | } | |
74 | ||
669a5db4 JG |
75 | /** |
76 | * sis_port_base - return PCI configuration base for dev | |
77 | * @adev: device | |
78 | * | |
79 | * Returns the base of the PCI configuration registers for this port | |
80 | * number. | |
81 | */ | |
82 | ||
83 | static int sis_port_base(struct ata_device *adev) | |
84 | { | |
85 | return 0x40 + (4 * adev->ap->port_no) + (2 * adev->devno); | |
86 | } | |
87 | ||
88 | /** | |
2e413f51 | 89 | * sis_133_cable_detect - check for 40/80 pin |
669a5db4 | 90 | * @ap: Port |
d4b2bab4 | 91 | * @deadline: deadline jiffies for the operation |
669a5db4 JG |
92 | * |
93 | * Perform cable detection for the later UDMA133 capable | |
94 | * SiS chipset. | |
95 | */ | |
96 | ||
2e413f51 | 97 | static int sis_133_cable_detect(struct ata_port *ap) |
669a5db4 | 98 | { |
669a5db4 JG |
99 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); |
100 | u16 tmp; | |
101 | ||
669a5db4 JG |
102 | /* The top bit of this register is the cable detect bit */ |
103 | pci_read_config_word(pdev, 0x50 + 2 * ap->port_no, &tmp); | |
7dcbc1f2 | 104 | if ((tmp & 0x8000) && !sis_short_ata40(pdev)) |
2e413f51 AC |
105 | return ATA_CBL_PATA40; |
106 | return ATA_CBL_PATA80; | |
669a5db4 JG |
107 | } |
108 | ||
109 | /** | |
2e413f51 | 110 | * sis_66_cable_detect - check for 40/80 pin |
669a5db4 | 111 | * @ap: Port |
d4b2bab4 | 112 | * @deadline: deadline jiffies for the operation |
669a5db4 JG |
113 | * |
114 | * Perform cable detection on the UDMA66, UDMA100 and early UDMA133 | |
115 | * SiS IDE controllers. | |
116 | */ | |
117 | ||
2e413f51 | 118 | static int sis_66_cable_detect(struct ata_port *ap) |
669a5db4 | 119 | { |
669a5db4 JG |
120 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); |
121 | u8 tmp; | |
122 | ||
669a5db4 JG |
123 | /* Older chips keep cable detect in bits 4/5 of reg 0x48 */ |
124 | pci_read_config_byte(pdev, 0x48, &tmp); | |
125 | tmp >>= ap->port_no; | |
7dcbc1f2 | 126 | if ((tmp & 0x10) && !sis_short_ata40(pdev)) |
2e413f51 AC |
127 | return ATA_CBL_PATA40; |
128 | return ATA_CBL_PATA80; | |
669a5db4 JG |
129 | } |
130 | ||
669a5db4 JG |
131 | |
132 | /** | |
2e413f51 | 133 | * sis_pre_reset - probe begin |
669a5db4 | 134 | * @ap: ATA port |
d4b2bab4 | 135 | * @deadline: deadline jiffies for the operation |
669a5db4 JG |
136 | * |
137 | * Set up cable type and use generic probe init | |
138 | */ | |
139 | ||
27c78b37 | 140 | static int sis_pre_reset(struct ata_port *ap, unsigned long deadline) |
669a5db4 JG |
141 | { |
142 | static const struct pci_bits sis_enable_bits[] = { | |
143 | { 0x4aU, 1U, 0x02UL, 0x02UL }, /* port 0 */ | |
144 | { 0x4aU, 1U, 0x04UL, 0x04UL }, /* port 1 */ | |
145 | }; | |
85cd7251 | 146 | |
669a5db4 JG |
147 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); |
148 | ||
2e413f51 AC |
149 | if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->port_no])) |
150 | return -ENOENT; | |
d4b2bab4 TH |
151 | |
152 | return ata_std_prereset(ap, deadline); | |
669a5db4 JG |
153 | } |
154 | ||
155 | ||
156 | /** | |
2e413f51 | 157 | * sis_error_handler - Probe specified port on PATA host controller |
669a5db4 JG |
158 | * @ap: Port to probe |
159 | * | |
160 | * LOCKING: | |
161 | * None (inherited from caller). | |
162 | */ | |
163 | ||
2e413f51 | 164 | static void sis_error_handler(struct ata_port *ap) |
669a5db4 | 165 | { |
2e413f51 | 166 | ata_bmdma_drive_eh(ap, sis_pre_reset, ata_std_softreset, NULL, ata_std_postreset); |
669a5db4 JG |
167 | } |
168 | ||
169 | /** | |
170 | * sis_set_fifo - Set RWP fifo bits for this device | |
171 | * @ap: Port | |
172 | * @adev: Device | |
173 | * | |
174 | * SIS chipsets implement prefetch/postwrite bits for each device | |
175 | * on both channels. This functionality is not ATAPI compatible and | |
176 | * must be configured according to the class of device present | |
177 | */ | |
178 | ||
179 | static void sis_set_fifo(struct ata_port *ap, struct ata_device *adev) | |
180 | { | |
181 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); | |
182 | u8 fifoctrl; | |
183 | u8 mask = 0x11; | |
184 | ||
185 | mask <<= (2 * ap->port_no); | |
186 | mask <<= adev->devno; | |
187 | ||
188 | /* This holds various bits including the FIFO control */ | |
189 | pci_read_config_byte(pdev, 0x4B, &fifoctrl); | |
190 | fifoctrl &= ~mask; | |
191 | ||
192 | /* Enable for ATA (disk) only */ | |
193 | if (adev->class == ATA_DEV_ATA) | |
194 | fifoctrl |= mask; | |
195 | pci_write_config_byte(pdev, 0x4B, fifoctrl); | |
196 | } | |
197 | ||
198 | /** | |
199 | * sis_old_set_piomode - Initialize host controller PATA PIO timings | |
200 | * @ap: Port whose timings we are configuring | |
201 | * @adev: Device we are configuring for. | |
202 | * | |
203 | * Set PIO mode for device, in host controller PCI config space. This | |
204 | * function handles PIO set up for all chips that are pre ATA100 and | |
205 | * also early ATA100 devices. | |
206 | * | |
207 | * LOCKING: | |
208 | * None (inherited from caller). | |
209 | */ | |
210 | ||
211 | static void sis_old_set_piomode (struct ata_port *ap, struct ata_device *adev) | |
212 | { | |
213 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); | |
214 | int port = sis_port_base(adev); | |
215 | u8 t1, t2; | |
216 | int speed = adev->pio_mode - XFER_PIO_0; | |
217 | ||
218 | const u8 active[] = { 0x00, 0x07, 0x04, 0x03, 0x01 }; | |
219 | const u8 recovery[] = { 0x00, 0x06, 0x04, 0x03, 0x03 }; | |
220 | ||
221 | sis_set_fifo(ap, adev); | |
222 | ||
223 | pci_read_config_byte(pdev, port, &t1); | |
224 | pci_read_config_byte(pdev, port + 1, &t2); | |
225 | ||
226 | t1 &= ~0x0F; /* Clear active/recovery timings */ | |
227 | t2 &= ~0x07; | |
228 | ||
229 | t1 |= active[speed]; | |
230 | t2 |= recovery[speed]; | |
231 | ||
232 | pci_write_config_byte(pdev, port, t1); | |
233 | pci_write_config_byte(pdev, port + 1, t2); | |
234 | } | |
235 | ||
236 | /** | |
237 | * sis_100_set_pioode - Initialize host controller PATA PIO timings | |
238 | * @ap: Port whose timings we are configuring | |
239 | * @adev: Device we are configuring for. | |
240 | * | |
241 | * Set PIO mode for device, in host controller PCI config space. This | |
242 | * function handles PIO set up for ATA100 devices and early ATA133. | |
243 | * | |
244 | * LOCKING: | |
245 | * None (inherited from caller). | |
246 | */ | |
247 | ||
248 | static void sis_100_set_piomode (struct ata_port *ap, struct ata_device *adev) | |
249 | { | |
250 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); | |
251 | int port = sis_port_base(adev); | |
252 | int speed = adev->pio_mode - XFER_PIO_0; | |
253 | ||
254 | const u8 actrec[] = { 0x00, 0x67, 0x44, 0x33, 0x31 }; | |
255 | ||
256 | sis_set_fifo(ap, adev); | |
257 | ||
258 | pci_write_config_byte(pdev, port, actrec[speed]); | |
259 | } | |
260 | ||
261 | /** | |
262 | * sis_133_set_pioode - Initialize host controller PATA PIO timings | |
263 | * @ap: Port whose timings we are configuring | |
264 | * @adev: Device we are configuring for. | |
265 | * | |
266 | * Set PIO mode for device, in host controller PCI config space. This | |
267 | * function handles PIO set up for the later ATA133 devices. | |
268 | * | |
269 | * LOCKING: | |
270 | * None (inherited from caller). | |
271 | */ | |
272 | ||
273 | static void sis_133_set_piomode (struct ata_port *ap, struct ata_device *adev) | |
274 | { | |
275 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); | |
276 | int port = 0x40; | |
277 | u32 t1; | |
278 | u32 reg54; | |
279 | int speed = adev->pio_mode - XFER_PIO_0; | |
280 | ||
281 | const u32 timing133[] = { | |
282 | 0x28269000, /* Recovery << 24 | Act << 16 | Ini << 12 */ | |
283 | 0x0C266000, | |
284 | 0x04263000, | |
285 | 0x0C0A3000, | |
286 | 0x05093000 | |
287 | }; | |
288 | const u32 timing100[] = { | |
289 | 0x1E1C6000, /* Recovery << 24 | Act << 16 | Ini << 12 */ | |
290 | 0x091C4000, | |
291 | 0x031C2000, | |
292 | 0x09072000, | |
293 | 0x04062000 | |
294 | }; | |
295 | ||
296 | sis_set_fifo(ap, adev); | |
297 | ||
298 | /* If bit 14 is set then the registers are mapped at 0x70 not 0x40 */ | |
299 | pci_read_config_dword(pdev, 0x54, ®54); | |
300 | if (reg54 & 0x40000000) | |
301 | port = 0x70; | |
302 | port += 8 * ap->port_no + 4 * adev->devno; | |
303 | ||
304 | pci_read_config_dword(pdev, port, &t1); | |
305 | t1 &= 0xC0C00FFF; /* Mask out timing */ | |
306 | ||
307 | if (t1 & 0x08) /* 100 or 133 ? */ | |
308 | t1 |= timing133[speed]; | |
309 | else | |
310 | t1 |= timing100[speed]; | |
311 | pci_write_config_byte(pdev, port, t1); | |
312 | } | |
313 | ||
314 | /** | |
315 | * sis_old_set_dmamode - Initialize host controller PATA DMA timings | |
316 | * @ap: Port whose timings we are configuring | |
317 | * @adev: Device to program | |
318 | * | |
319 | * Set UDMA/MWDMA mode for device, in host controller PCI config space. | |
320 | * Handles pre UDMA and UDMA33 devices. Supports MWDMA as well unlike | |
321 | * the old ide/pci driver. | |
322 | * | |
323 | * LOCKING: | |
324 | * None (inherited from caller). | |
325 | */ | |
326 | ||
327 | static void sis_old_set_dmamode (struct ata_port *ap, struct ata_device *adev) | |
328 | { | |
329 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); | |
330 | int speed = adev->dma_mode - XFER_MW_DMA_0; | |
331 | int drive_pci = sis_port_base(adev); | |
332 | u16 timing; | |
333 | ||
334 | const u16 mwdma_bits[] = { 0x707, 0x202, 0x202 }; | |
335 | const u16 udma_bits[] = { 0xE000, 0xC000, 0xA000 }; | |
336 | ||
337 | pci_read_config_word(pdev, drive_pci, &timing); | |
338 | ||
339 | if (adev->dma_mode < XFER_UDMA_0) { | |
340 | /* bits 3-0 hold recovery timing bits 8-10 active timing and | |
341 | the higer bits are dependant on the device */ | |
342 | timing &= ~ 0x870F; | |
343 | timing |= mwdma_bits[speed]; | |
344 | pci_write_config_word(pdev, drive_pci, timing); | |
345 | } else { | |
346 | /* Bit 15 is UDMA on/off, bit 13-14 are cycle time */ | |
347 | speed = adev->dma_mode - XFER_UDMA_0; | |
348 | timing &= ~0x6000; | |
349 | timing |= udma_bits[speed]; | |
350 | } | |
351 | } | |
352 | ||
353 | /** | |
354 | * sis_66_set_dmamode - Initialize host controller PATA DMA timings | |
355 | * @ap: Port whose timings we are configuring | |
356 | * @adev: Device to program | |
357 | * | |
358 | * Set UDMA/MWDMA mode for device, in host controller PCI config space. | |
359 | * Handles UDMA66 and early UDMA100 devices. Supports MWDMA as well unlike | |
360 | * the old ide/pci driver. | |
361 | * | |
362 | * LOCKING: | |
363 | * None (inherited from caller). | |
364 | */ | |
365 | ||
366 | static void sis_66_set_dmamode (struct ata_port *ap, struct ata_device *adev) | |
367 | { | |
368 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); | |
369 | int speed = adev->dma_mode - XFER_MW_DMA_0; | |
370 | int drive_pci = sis_port_base(adev); | |
371 | u16 timing; | |
372 | ||
373 | const u16 mwdma_bits[] = { 0x707, 0x202, 0x202 }; | |
374 | const u16 udma_bits[] = { 0xF000, 0xD000, 0xB000, 0xA000, 0x9000}; | |
375 | ||
376 | pci_read_config_word(pdev, drive_pci, &timing); | |
377 | ||
378 | if (adev->dma_mode < XFER_UDMA_0) { | |
379 | /* bits 3-0 hold recovery timing bits 8-10 active timing and | |
380 | the higer bits are dependant on the device, bit 15 udma */ | |
381 | timing &= ~ 0x870F; | |
382 | timing |= mwdma_bits[speed]; | |
383 | } else { | |
384 | /* Bit 15 is UDMA on/off, bit 12-14 are cycle time */ | |
385 | speed = adev->dma_mode - XFER_UDMA_0; | |
386 | timing &= ~0x6000; | |
387 | timing |= udma_bits[speed]; | |
388 | } | |
389 | pci_write_config_word(pdev, drive_pci, timing); | |
390 | } | |
391 | ||
392 | /** | |
393 | * sis_100_set_dmamode - Initialize host controller PATA DMA timings | |
394 | * @ap: Port whose timings we are configuring | |
395 | * @adev: Device to program | |
396 | * | |
397 | * Set UDMA/MWDMA mode for device, in host controller PCI config space. | |
398 | * Handles UDMA66 and early UDMA100 devices. | |
399 | * | |
400 | * LOCKING: | |
401 | * None (inherited from caller). | |
402 | */ | |
403 | ||
404 | static void sis_100_set_dmamode (struct ata_port *ap, struct ata_device *adev) | |
405 | { | |
406 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); | |
407 | int speed = adev->dma_mode - XFER_MW_DMA_0; | |
408 | int drive_pci = sis_port_base(adev); | |
409 | u16 timing; | |
410 | ||
411 | const u16 udma_bits[] = { 0x8B00, 0x8700, 0x8500, 0x8300, 0x8200, 0x8100}; | |
412 | ||
413 | pci_read_config_word(pdev, drive_pci, &timing); | |
414 | ||
415 | if (adev->dma_mode < XFER_UDMA_0) { | |
416 | /* NOT SUPPORTED YET: NEED DATA SHEET. DITTO IN OLD DRIVER */ | |
417 | } else { | |
418 | /* Bit 15 is UDMA on/off, bit 12-14 are cycle time */ | |
419 | speed = adev->dma_mode - XFER_UDMA_0; | |
420 | timing &= ~0x0F00; | |
421 | timing |= udma_bits[speed]; | |
422 | } | |
423 | pci_write_config_word(pdev, drive_pci, timing); | |
424 | } | |
425 | ||
426 | /** | |
427 | * sis_133_early_set_dmamode - Initialize host controller PATA DMA timings | |
428 | * @ap: Port whose timings we are configuring | |
429 | * @adev: Device to program | |
430 | * | |
431 | * Set UDMA/MWDMA mode for device, in host controller PCI config space. | |
432 | * Handles early SiS 961 bridges. Supports MWDMA as well unlike | |
433 | * the old ide/pci driver. | |
434 | * | |
435 | * LOCKING: | |
436 | * None (inherited from caller). | |
437 | */ | |
438 | ||
439 | static void sis_133_early_set_dmamode (struct ata_port *ap, struct ata_device *adev) | |
440 | { | |
441 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); | |
442 | int speed = adev->dma_mode - XFER_MW_DMA_0; | |
443 | int drive_pci = sis_port_base(adev); | |
444 | u16 timing; | |
445 | ||
2e413f51 | 446 | static const u16 udma_bits[] = { 0x8F00, 0x8A00, 0x8700, 0x8500, 0x8300, 0x8200, 0x8100}; |
669a5db4 JG |
447 | |
448 | pci_read_config_word(pdev, drive_pci, &timing); | |
449 | ||
450 | if (adev->dma_mode < XFER_UDMA_0) { | |
451 | /* NOT SUPPORTED YET: NEED DATA SHEET. DITTO IN OLD DRIVER */ | |
452 | } else { | |
453 | /* Bit 15 is UDMA on/off, bit 12-14 are cycle time */ | |
454 | speed = adev->dma_mode - XFER_UDMA_0; | |
455 | timing &= ~0x0F00; | |
456 | timing |= udma_bits[speed]; | |
457 | } | |
458 | pci_write_config_word(pdev, drive_pci, timing); | |
459 | } | |
460 | ||
461 | /** | |
462 | * sis_133_set_dmamode - Initialize host controller PATA DMA timings | |
463 | * @ap: Port whose timings we are configuring | |
464 | * @adev: Device to program | |
465 | * | |
466 | * Set UDMA/MWDMA mode for device, in host controller PCI config space. | |
467 | * Handles early SiS 961 bridges. Supports MWDMA as well unlike | |
468 | * the old ide/pci driver. | |
469 | * | |
470 | * LOCKING: | |
471 | * None (inherited from caller). | |
472 | */ | |
473 | ||
474 | static void sis_133_set_dmamode (struct ata_port *ap, struct ata_device *adev) | |
475 | { | |
476 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); | |
477 | int speed = adev->dma_mode - XFER_MW_DMA_0; | |
478 | int port = 0x40; | |
479 | u32 t1; | |
480 | u32 reg54; | |
481 | ||
482 | /* bits 4- cycle time 8 - cvs time */ | |
2e413f51 AC |
483 | static const u32 timing_u100[] = { 0x6B0, 0x470, 0x350, 0x140, 0x120, 0x110, 0x000 }; |
484 | static const u32 timing_u133[] = { 0x9F0, 0x6A0, 0x470, 0x250, 0x230, 0x220, 0x210 }; | |
669a5db4 JG |
485 | |
486 | /* If bit 14 is set then the registers are mapped at 0x70 not 0x40 */ | |
487 | pci_read_config_dword(pdev, 0x54, ®54); | |
488 | if (reg54 & 0x40000000) | |
489 | port = 0x70; | |
490 | port += (8 * ap->port_no) + (4 * adev->devno); | |
491 | ||
492 | pci_read_config_dword(pdev, port, &t1); | |
493 | ||
494 | if (adev->dma_mode < XFER_UDMA_0) { | |
495 | t1 &= ~0x00000004; | |
496 | /* FIXME: need data sheet to add MWDMA here. Also lacking on | |
497 | ide/pci driver */ | |
498 | } else { | |
499 | speed = adev->dma_mode - XFER_UDMA_0; | |
500 | /* if & 8 no UDMA133 - need info for ... */ | |
501 | t1 &= ~0x00000FF0; | |
502 | t1 |= 0x00000004; | |
503 | if (t1 & 0x08) | |
504 | t1 |= timing_u133[speed]; | |
505 | else | |
506 | t1 |= timing_u100[speed]; | |
507 | } | |
508 | pci_write_config_dword(pdev, port, t1); | |
509 | } | |
510 | ||
511 | static struct scsi_host_template sis_sht = { | |
512 | .module = THIS_MODULE, | |
513 | .name = DRV_NAME, | |
514 | .ioctl = ata_scsi_ioctl, | |
515 | .queuecommand = ata_scsi_queuecmd, | |
516 | .can_queue = ATA_DEF_QUEUE, | |
517 | .this_id = ATA_SHT_THIS_ID, | |
518 | .sg_tablesize = LIBATA_MAX_PRD, | |
669a5db4 JG |
519 | .cmd_per_lun = ATA_SHT_CMD_PER_LUN, |
520 | .emulated = ATA_SHT_EMULATED, | |
521 | .use_clustering = ATA_SHT_USE_CLUSTERING, | |
522 | .proc_name = DRV_NAME, | |
523 | .dma_boundary = ATA_DMA_BOUNDARY, | |
524 | .slave_configure = ata_scsi_slave_config, | |
afdfe899 | 525 | .slave_destroy = ata_scsi_slave_destroy, |
669a5db4 JG |
526 | .bios_param = ata_std_bios_param, |
527 | }; | |
528 | ||
529 | static const struct ata_port_operations sis_133_ops = { | |
530 | .port_disable = ata_port_disable, | |
531 | .set_piomode = sis_133_set_piomode, | |
532 | .set_dmamode = sis_133_set_dmamode, | |
533 | .mode_filter = ata_pci_default_filter, | |
534 | ||
535 | .tf_load = ata_tf_load, | |
536 | .tf_read = ata_tf_read, | |
537 | .check_status = ata_check_status, | |
538 | .exec_command = ata_exec_command, | |
539 | .dev_select = ata_std_dev_select, | |
540 | ||
541 | .freeze = ata_bmdma_freeze, | |
542 | .thaw = ata_bmdma_thaw, | |
2e413f51 | 543 | .error_handler = sis_error_handler, |
669a5db4 | 544 | .post_internal_cmd = ata_bmdma_post_internal_cmd, |
2e413f51 | 545 | .cable_detect = sis_133_cable_detect, |
669a5db4 JG |
546 | |
547 | .bmdma_setup = ata_bmdma_setup, | |
548 | .bmdma_start = ata_bmdma_start, | |
549 | .bmdma_stop = ata_bmdma_stop, | |
550 | .bmdma_status = ata_bmdma_status, | |
551 | .qc_prep = ata_qc_prep, | |
552 | .qc_issue = ata_qc_issue_prot, | |
0d5ff566 | 553 | .data_xfer = ata_data_xfer, |
669a5db4 | 554 | |
669a5db4 JG |
555 | .irq_handler = ata_interrupt, |
556 | .irq_clear = ata_bmdma_irq_clear, | |
246ce3b6 AI |
557 | .irq_on = ata_irq_on, |
558 | .irq_ack = ata_irq_ack, | |
669a5db4 JG |
559 | |
560 | .port_start = ata_port_start, | |
669a5db4 JG |
561 | }; |
562 | ||
563 | static const struct ata_port_operations sis_133_early_ops = { | |
564 | .port_disable = ata_port_disable, | |
565 | .set_piomode = sis_100_set_piomode, | |
566 | .set_dmamode = sis_133_early_set_dmamode, | |
567 | .mode_filter = ata_pci_default_filter, | |
568 | ||
569 | .tf_load = ata_tf_load, | |
570 | .tf_read = ata_tf_read, | |
571 | .check_status = ata_check_status, | |
572 | .exec_command = ata_exec_command, | |
573 | .dev_select = ata_std_dev_select, | |
574 | ||
575 | .freeze = ata_bmdma_freeze, | |
576 | .thaw = ata_bmdma_thaw, | |
2e413f51 | 577 | .error_handler = sis_error_handler, |
669a5db4 | 578 | .post_internal_cmd = ata_bmdma_post_internal_cmd, |
2e413f51 | 579 | .cable_detect = sis_66_cable_detect, |
85cd7251 | 580 | |
669a5db4 JG |
581 | .bmdma_setup = ata_bmdma_setup, |
582 | .bmdma_start = ata_bmdma_start, | |
583 | .bmdma_stop = ata_bmdma_stop, | |
584 | .bmdma_status = ata_bmdma_status, | |
585 | .qc_prep = ata_qc_prep, | |
586 | .qc_issue = ata_qc_issue_prot, | |
0d5ff566 | 587 | .data_xfer = ata_data_xfer, |
669a5db4 | 588 | |
669a5db4 JG |
589 | .irq_handler = ata_interrupt, |
590 | .irq_clear = ata_bmdma_irq_clear, | |
246ce3b6 AI |
591 | .irq_on = ata_irq_on, |
592 | .irq_ack = ata_irq_ack, | |
669a5db4 JG |
593 | |
594 | .port_start = ata_port_start, | |
669a5db4 JG |
595 | }; |
596 | ||
597 | static const struct ata_port_operations sis_100_ops = { | |
598 | .port_disable = ata_port_disable, | |
599 | .set_piomode = sis_100_set_piomode, | |
600 | .set_dmamode = sis_100_set_dmamode, | |
601 | .mode_filter = ata_pci_default_filter, | |
602 | ||
603 | .tf_load = ata_tf_load, | |
604 | .tf_read = ata_tf_read, | |
605 | .check_status = ata_check_status, | |
606 | .exec_command = ata_exec_command, | |
607 | .dev_select = ata_std_dev_select, | |
608 | ||
609 | .freeze = ata_bmdma_freeze, | |
610 | .thaw = ata_bmdma_thaw, | |
2e413f51 | 611 | .error_handler = sis_error_handler, |
669a5db4 | 612 | .post_internal_cmd = ata_bmdma_post_internal_cmd, |
2e413f51 | 613 | .cable_detect = sis_66_cable_detect, |
669a5db4 JG |
614 | |
615 | .bmdma_setup = ata_bmdma_setup, | |
616 | .bmdma_start = ata_bmdma_start, | |
617 | .bmdma_stop = ata_bmdma_stop, | |
618 | .bmdma_status = ata_bmdma_status, | |
619 | .qc_prep = ata_qc_prep, | |
620 | .qc_issue = ata_qc_issue_prot, | |
0d5ff566 | 621 | .data_xfer = ata_data_xfer, |
669a5db4 | 622 | |
669a5db4 JG |
623 | .irq_handler = ata_interrupt, |
624 | .irq_clear = ata_bmdma_irq_clear, | |
246ce3b6 AI |
625 | .irq_on = ata_irq_on, |
626 | .irq_ack = ata_irq_ack, | |
669a5db4 JG |
627 | |
628 | .port_start = ata_port_start, | |
669a5db4 JG |
629 | }; |
630 | ||
631 | static const struct ata_port_operations sis_66_ops = { | |
632 | .port_disable = ata_port_disable, | |
633 | .set_piomode = sis_old_set_piomode, | |
634 | .set_dmamode = sis_66_set_dmamode, | |
635 | .mode_filter = ata_pci_default_filter, | |
636 | ||
637 | .tf_load = ata_tf_load, | |
638 | .tf_read = ata_tf_read, | |
639 | .check_status = ata_check_status, | |
640 | .exec_command = ata_exec_command, | |
641 | .dev_select = ata_std_dev_select, | |
2e413f51 | 642 | .cable_detect = sis_66_cable_detect, |
669a5db4 JG |
643 | |
644 | .freeze = ata_bmdma_freeze, | |
645 | .thaw = ata_bmdma_thaw, | |
2e413f51 | 646 | .error_handler = sis_error_handler, |
669a5db4 JG |
647 | .post_internal_cmd = ata_bmdma_post_internal_cmd, |
648 | ||
649 | .bmdma_setup = ata_bmdma_setup, | |
650 | .bmdma_start = ata_bmdma_start, | |
651 | .bmdma_stop = ata_bmdma_stop, | |
652 | .bmdma_status = ata_bmdma_status, | |
653 | .qc_prep = ata_qc_prep, | |
654 | .qc_issue = ata_qc_issue_prot, | |
0d5ff566 | 655 | .data_xfer = ata_data_xfer, |
669a5db4 | 656 | |
669a5db4 JG |
657 | .irq_handler = ata_interrupt, |
658 | .irq_clear = ata_bmdma_irq_clear, | |
246ce3b6 AI |
659 | .irq_on = ata_irq_on, |
660 | .irq_ack = ata_irq_ack, | |
669a5db4 JG |
661 | |
662 | .port_start = ata_port_start, | |
669a5db4 JG |
663 | }; |
664 | ||
665 | static const struct ata_port_operations sis_old_ops = { | |
666 | .port_disable = ata_port_disable, | |
667 | .set_piomode = sis_old_set_piomode, | |
668 | .set_dmamode = sis_old_set_dmamode, | |
669 | .mode_filter = ata_pci_default_filter, | |
670 | ||
671 | .tf_load = ata_tf_load, | |
672 | .tf_read = ata_tf_read, | |
673 | .check_status = ata_check_status, | |
674 | .exec_command = ata_exec_command, | |
675 | .dev_select = ata_std_dev_select, | |
676 | ||
677 | .freeze = ata_bmdma_freeze, | |
678 | .thaw = ata_bmdma_thaw, | |
2e413f51 | 679 | .error_handler = sis_error_handler, |
669a5db4 | 680 | .post_internal_cmd = ata_bmdma_post_internal_cmd, |
2e413f51 | 681 | .cable_detect = ata_cable_40wire, |
669a5db4 JG |
682 | |
683 | .bmdma_setup = ata_bmdma_setup, | |
684 | .bmdma_start = ata_bmdma_start, | |
685 | .bmdma_stop = ata_bmdma_stop, | |
686 | .bmdma_status = ata_bmdma_status, | |
687 | .qc_prep = ata_qc_prep, | |
688 | .qc_issue = ata_qc_issue_prot, | |
0d5ff566 | 689 | .data_xfer = ata_data_xfer, |
669a5db4 | 690 | |
669a5db4 JG |
691 | .irq_handler = ata_interrupt, |
692 | .irq_clear = ata_bmdma_irq_clear, | |
246ce3b6 AI |
693 | .irq_on = ata_irq_on, |
694 | .irq_ack = ata_irq_ack, | |
669a5db4 JG |
695 | |
696 | .port_start = ata_port_start, | |
669a5db4 JG |
697 | }; |
698 | ||
1626aeb8 | 699 | static const struct ata_port_info sis_info = { |
669a5db4 JG |
700 | .sht = &sis_sht, |
701 | .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, | |
702 | .pio_mask = 0x1f, /* pio0-4 */ | |
703 | .mwdma_mask = 0x07, | |
704 | .udma_mask = 0, | |
705 | .port_ops = &sis_old_ops, | |
706 | }; | |
1626aeb8 | 707 | static const struct ata_port_info sis_info33 = { |
669a5db4 JG |
708 | .sht = &sis_sht, |
709 | .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, | |
710 | .pio_mask = 0x1f, /* pio0-4 */ | |
711 | .mwdma_mask = 0x07, | |
712 | .udma_mask = ATA_UDMA2, /* UDMA 33 */ | |
713 | .port_ops = &sis_old_ops, | |
714 | }; | |
1626aeb8 | 715 | static const struct ata_port_info sis_info66 = { |
669a5db4 JG |
716 | .sht = &sis_sht, |
717 | .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, | |
718 | .pio_mask = 0x1f, /* pio0-4 */ | |
719 | .udma_mask = ATA_UDMA4, /* UDMA 66 */ | |
720 | .port_ops = &sis_66_ops, | |
721 | }; | |
1626aeb8 | 722 | static const struct ata_port_info sis_info100 = { |
669a5db4 JG |
723 | .sht = &sis_sht, |
724 | .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, | |
725 | .pio_mask = 0x1f, /* pio0-4 */ | |
726 | .udma_mask = ATA_UDMA5, | |
727 | .port_ops = &sis_100_ops, | |
728 | }; | |
1626aeb8 | 729 | static const struct ata_port_info sis_info100_early = { |
669a5db4 JG |
730 | .sht = &sis_sht, |
731 | .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, | |
732 | .udma_mask = ATA_UDMA5, | |
733 | .pio_mask = 0x1f, /* pio0-4 */ | |
734 | .port_ops = &sis_66_ops, | |
735 | }; | |
1626aeb8 | 736 | const struct ata_port_info sis_info133 = { |
669a5db4 JG |
737 | .sht = &sis_sht, |
738 | .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, | |
739 | .pio_mask = 0x1f, /* pio0-4 */ | |
740 | .udma_mask = ATA_UDMA6, | |
741 | .port_ops = &sis_133_ops, | |
742 | }; | |
1626aeb8 | 743 | static const struct ata_port_info sis_info133_early = { |
669a5db4 JG |
744 | .sht = &sis_sht, |
745 | .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, | |
746 | .pio_mask = 0x1f, /* pio0-4 */ | |
747 | .udma_mask = ATA_UDMA6, | |
748 | .port_ops = &sis_133_early_ops, | |
749 | }; | |
750 | ||
9b14dec5 A |
751 | /* Privately shared with the SiS180 SATA driver, not for use elsewhere */ |
752 | EXPORT_SYMBOL_GPL(sis_info133); | |
669a5db4 JG |
753 | |
754 | static void sis_fixup(struct pci_dev *pdev, struct sis_chipset *sis) | |
755 | { | |
756 | u16 regw; | |
757 | u8 reg; | |
758 | ||
759 | if (sis->info == &sis_info133) { | |
760 | pci_read_config_word(pdev, 0x50, ®w); | |
761 | if (regw & 0x08) | |
762 | pci_write_config_word(pdev, 0x50, regw & ~0x08); | |
763 | pci_read_config_word(pdev, 0x52, ®w); | |
764 | if (regw & 0x08) | |
765 | pci_write_config_word(pdev, 0x52, regw & ~0x08); | |
766 | return; | |
767 | } | |
768 | ||
769 | if (sis->info == &sis_info133_early || sis->info == &sis_info100) { | |
770 | /* Fix up latency */ | |
771 | pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x80); | |
772 | /* Set compatibility bit */ | |
773 | pci_read_config_byte(pdev, 0x49, ®); | |
774 | if (!(reg & 0x01)) | |
775 | pci_write_config_byte(pdev, 0x49, reg | 0x01); | |
776 | return; | |
777 | } | |
778 | ||
779 | if (sis->info == &sis_info66 || sis->info == &sis_info100_early) { | |
780 | /* Fix up latency */ | |
781 | pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x80); | |
782 | /* Set compatibility bit */ | |
783 | pci_read_config_byte(pdev, 0x52, ®); | |
784 | if (!(reg & 0x04)) | |
785 | pci_write_config_byte(pdev, 0x52, reg | 0x04); | |
786 | return; | |
787 | } | |
788 | ||
789 | if (sis->info == &sis_info33) { | |
790 | pci_read_config_byte(pdev, PCI_CLASS_PROG, ®); | |
791 | if (( reg & 0x0F ) != 0x00) | |
792 | pci_write_config_byte(pdev, PCI_CLASS_PROG, reg & 0xF0); | |
793 | /* Fall through to ATA16 fixup below */ | |
794 | } | |
795 | ||
796 | if (sis->info == &sis_info || sis->info == &sis_info33) { | |
797 | /* force per drive recovery and active timings | |
798 | needed on ATA_33 and below chips */ | |
799 | pci_read_config_byte(pdev, 0x52, ®); | |
800 | if (!(reg & 0x08)) | |
801 | pci_write_config_byte(pdev, 0x52, reg|0x08); | |
802 | return; | |
803 | } | |
804 | ||
805 | BUG(); | |
806 | } | |
807 | ||
808 | /** | |
809 | * sis_init_one - Register SiS ATA PCI device with kernel services | |
810 | * @pdev: PCI device to register | |
811 | * @ent: Entry in sis_pci_tbl matching with @pdev | |
812 | * | |
813 | * Called from kernel PCI layer. We probe for combined mode (sigh), | |
814 | * and then hand over control to libata, for it to do the rest. | |
815 | * | |
816 | * LOCKING: | |
817 | * Inherited from PCI layer (may sleep). | |
818 | * | |
819 | * RETURNS: | |
820 | * Zero on success, or -ERRNO value. | |
821 | */ | |
822 | ||
823 | static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) | |
824 | { | |
825 | static int printed_version; | |
1626aeb8 TH |
826 | struct ata_port_info port; |
827 | const struct ata_port_info *ppi[] = { &port, NULL }; | |
669a5db4 JG |
828 | struct pci_dev *host = NULL; |
829 | struct sis_chipset *chipset = NULL; | |
f3769e9d | 830 | struct sis_chipset *sets; |
669a5db4 JG |
831 | |
832 | static struct sis_chipset sis_chipsets[] = { | |
f20b16ff | 833 | |
af323a2f AC |
834 | { 0x0968, &sis_info133 }, |
835 | { 0x0966, &sis_info133 }, | |
836 | { 0x0965, &sis_info133 }, | |
669a5db4 JG |
837 | { 0x0745, &sis_info100 }, |
838 | { 0x0735, &sis_info100 }, | |
839 | { 0x0733, &sis_info100 }, | |
840 | { 0x0635, &sis_info100 }, | |
841 | { 0x0633, &sis_info100 }, | |
842 | ||
843 | { 0x0730, &sis_info100_early }, /* 100 with ATA 66 layout */ | |
844 | { 0x0550, &sis_info100_early }, /* 100 with ATA 66 layout */ | |
845 | ||
846 | { 0x0640, &sis_info66 }, | |
847 | { 0x0630, &sis_info66 }, | |
848 | { 0x0620, &sis_info66 }, | |
849 | { 0x0540, &sis_info66 }, | |
850 | { 0x0530, &sis_info66 }, | |
851 | ||
852 | { 0x5600, &sis_info33 }, | |
853 | { 0x5598, &sis_info33 }, | |
854 | { 0x5597, &sis_info33 }, | |
855 | { 0x5591, &sis_info33 }, | |
856 | { 0x5582, &sis_info33 }, | |
857 | { 0x5581, &sis_info33 }, | |
858 | ||
859 | { 0x5596, &sis_info }, | |
860 | { 0x5571, &sis_info }, | |
861 | { 0x5517, &sis_info }, | |
862 | { 0x5511, &sis_info }, | |
863 | ||
864 | {0} | |
865 | }; | |
866 | static struct sis_chipset sis133_early = { | |
867 | 0x0, &sis_info133_early | |
868 | }; | |
869 | static struct sis_chipset sis133 = { | |
870 | 0x0, &sis_info133 | |
871 | }; | |
872 | static struct sis_chipset sis100_early = { | |
873 | 0x0, &sis_info100_early | |
874 | }; | |
875 | static struct sis_chipset sis100 = { | |
876 | 0x0, &sis_info100 | |
877 | }; | |
878 | ||
879 | if (!printed_version++) | |
880 | dev_printk(KERN_DEBUG, &pdev->dev, | |
881 | "version " DRV_VERSION "\n"); | |
882 | ||
883 | /* We have to find the bridge first */ | |
884 | ||
f3769e9d AC |
885 | for (sets = &sis_chipsets[0]; sets->device; sets++) { |
886 | host = pci_get_device(PCI_VENDOR_ID_SI, sets->device, NULL); | |
669a5db4 | 887 | if (host != NULL) { |
f3769e9d AC |
888 | chipset = sets; /* Match found */ |
889 | if (sets->device == 0x630) { /* SIS630 */ | |
669a5db4 JG |
890 | u8 host_rev; |
891 | pci_read_config_byte(host, PCI_REVISION_ID, &host_rev); | |
892 | if (host_rev >= 0x30) /* 630 ET */ | |
893 | chipset = &sis100_early; | |
894 | } | |
895 | break; | |
896 | } | |
897 | } | |
898 | ||
899 | /* Look for concealed bridges */ | |
f3769e9d | 900 | if (chipset == NULL) { |
669a5db4 JG |
901 | /* Second check */ |
902 | u32 idemisc; | |
903 | u16 trueid; | |
904 | ||
905 | /* Disable ID masking and register remapping then | |
906 | see what the real ID is */ | |
907 | ||
908 | pci_read_config_dword(pdev, 0x54, &idemisc); | |
909 | pci_write_config_dword(pdev, 0x54, idemisc & 0x7fffffff); | |
910 | pci_read_config_word(pdev, PCI_DEVICE_ID, &trueid); | |
911 | pci_write_config_dword(pdev, 0x54, idemisc); | |
912 | ||
913 | switch(trueid) { | |
914 | case 0x5518: /* SIS 962/963 */ | |
915 | chipset = &sis133; | |
916 | if ((idemisc & 0x40000000) == 0) { | |
917 | pci_write_config_dword(pdev, 0x54, idemisc | 0x40000000); | |
918 | printk(KERN_INFO "SIS5513: Switching to 5513 register mapping\n"); | |
919 | } | |
920 | break; | |
921 | case 0x0180: /* SIS 965/965L */ | |
922 | chipset = &sis133; | |
923 | break; | |
924 | case 0x1180: /* SIS 966/966L */ | |
925 | chipset = &sis133; | |
926 | break; | |
927 | } | |
928 | } | |
929 | ||
930 | /* Further check */ | |
931 | if (chipset == NULL) { | |
932 | struct pci_dev *lpc_bridge; | |
933 | u16 trueid; | |
934 | u8 prefctl; | |
935 | u8 idecfg; | |
936 | u8 sbrev; | |
937 | ||
938 | /* Try the second unmasking technique */ | |
939 | pci_read_config_byte(pdev, 0x4a, &idecfg); | |
940 | pci_write_config_byte(pdev, 0x4a, idecfg | 0x10); | |
941 | pci_read_config_word(pdev, PCI_DEVICE_ID, &trueid); | |
942 | pci_write_config_byte(pdev, 0x4a, idecfg); | |
943 | ||
944 | switch(trueid) { | |
945 | case 0x5517: | |
946 | lpc_bridge = pci_get_slot(pdev->bus, 0x10); /* Bus 0 Dev 2 Fn 0 */ | |
947 | if (lpc_bridge == NULL) | |
948 | break; | |
949 | pci_read_config_byte(lpc_bridge, PCI_REVISION_ID, &sbrev); | |
950 | pci_read_config_byte(pdev, 0x49, &prefctl); | |
951 | pci_dev_put(lpc_bridge); | |
952 | ||
953 | if (sbrev == 0x10 && (prefctl & 0x80)) { | |
954 | chipset = &sis133_early; | |
955 | break; | |
956 | } | |
957 | chipset = &sis100; | |
958 | break; | |
959 | } | |
960 | } | |
961 | pci_dev_put(host); | |
962 | ||
963 | /* No chipset info, no support */ | |
964 | if (chipset == NULL) | |
965 | return -ENODEV; | |
966 | ||
1626aeb8 TH |
967 | port = *chipset->info; |
968 | port.private_data = chipset; | |
669a5db4 JG |
969 | |
970 | sis_fixup(pdev, chipset); | |
971 | ||
1626aeb8 | 972 | return ata_pci_init_one(pdev, ppi); |
669a5db4 JG |
973 | } |
974 | ||
975 | static const struct pci_device_id sis_pci_tbl[] = { | |
2d2744fc JG |
976 | { PCI_VDEVICE(SI, 0x5513), }, /* SiS 5513 */ |
977 | { PCI_VDEVICE(SI, 0x5518), }, /* SiS 5518 */ | |
978 | ||
669a5db4 JG |
979 | { } |
980 | }; | |
981 | ||
982 | static struct pci_driver sis_pci_driver = { | |
983 | .name = DRV_NAME, | |
984 | .id_table = sis_pci_tbl, | |
985 | .probe = sis_init_one, | |
986 | .remove = ata_pci_remove_one, | |
438ac6d5 | 987 | #ifdef CONFIG_PM |
62d64ae0 A |
988 | .suspend = ata_pci_device_suspend, |
989 | .resume = ata_pci_device_resume, | |
438ac6d5 | 990 | #endif |
669a5db4 JG |
991 | }; |
992 | ||
993 | static int __init sis_init(void) | |
994 | { | |
995 | return pci_register_driver(&sis_pci_driver); | |
996 | } | |
997 | ||
998 | static void __exit sis_exit(void) | |
999 | { | |
1000 | pci_unregister_driver(&sis_pci_driver); | |
1001 | } | |
1002 | ||
669a5db4 JG |
1003 | module_init(sis_init); |
1004 | module_exit(sis_exit); | |
1005 | ||
1006 | MODULE_AUTHOR("Alan Cox"); | |
1007 | MODULE_DESCRIPTION("SCSI low-level driver for SiS ATA"); | |
1008 | MODULE_LICENSE("GPL"); | |
1009 | MODULE_DEVICE_TABLE(pci, sis_pci_tbl); | |
1010 | MODULE_VERSION(DRV_VERSION); | |
1011 |