[deliverable/linux.git] / drivers / block / cciss_scsi.h

/*
 *    Disk Array driver for HP Smart Array controllers, SCSI Tape module.
 *    (C) Copyright 2001, 2007 Hewlett-Packard Development Company, L.P.
 *
 *    This program is free software; you can redistribute it and/or modify
 *    it under the terms of the GNU General Public License as published by
 *    the Free Software Foundation; version 2 of the License.
 *
 *    This program is distributed in the hope that it will be useful,
 *    but WITHOUT ANY WARRANTY; without even the implied warranty of
 *    MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. See the GNU
 *    General Public License for more details.
 *
 *    You should have received a copy of the GNU General Public License
 *    along with this program; if not, write to the Free Software
 *    Foundation, Inc., 59 Temple Place, Suite 300, Boston, MA
 *    02111-1307, USA.
 *
 *    Questions/Comments/Bugfixes to iss_storagedev@hp.com
 *
 */
#ifdef CONFIG_CISS_SCSI_TAPE
#ifndef _CCISS_SCSI_H_
#define _CCISS_SCSI_H_

#include <scsi/scsicam.h> /* possibly irrelevant, since we don't show disks */

		/* the scsi id of the adapter... */
#define SELF_SCSI_ID 15
		/* 15 is somewhat arbitrary, since the scsi-2 bus
		   that's presented by the driver to the OS is
		   fabricated.  The "real" scsi-3 bus the
		   hardware presents is fabricated too.
		   The actual, honest-to-goodness physical
		   bus that the devices are attached to is not
		   addressible natively, and may in fact turn
		   out to be not scsi at all. */


/* 

If the upper scsi layer tries to track how many commands we have 
outstanding, it will be operating under the misapprehension that it is
the only one sending us requests.  We also have the block interface,
which is where most requests must surely come from, so the upper layer's
notion of how many requests we have outstanding will be wrong most or
all of the time. 

Note, the normal SCSI mid-layer error handling doesn't work well
for this driver because 1) it takes the io_request_lock before
calling error handlers and uses a local variable to store flags,
so the io_request_lock cannot be released and interrupts enabled
inside the error handlers, and, the error handlers cannot poll
for command completion because they might get commands from the
block half of the driver completing, and not know what to do
with them.  That's what we get for making a hybrid scsi/block
driver, I suppose.

*/

struct cciss_scsi_dev_t {
	int devtype;
	int bus, target, lun;		/* as presented to the OS */
	unsigned char scsi3addr[8];	/* as presented to the HW */
	unsigned char device_id[16];	/* from inquiry pg. 0x83 */
	unsigned char vendor[8];	/* bytes 8-15 of inquiry data */
	unsigned char model[16];	/* bytes 16-31 of inquiry data */
	unsigned char revision[4];	/* bytes 32-35 of inquiry data */
};

struct cciss_scsi_hba_t {
	char *name;
	int ndevices;
#define CCISS_MAX_SCSI_DEVS_PER_HBA 16
	struct cciss_scsi_dev_t dev[CCISS_MAX_SCSI_DEVS_PER_HBA];
};

#endif /* _CCISS_SCSI_H_ */
#endif /* CONFIG_CISS_SCSI_TAPE */
Commit	Line	Data
1da177e4	1	/*
bd4f36d6 MM	2	* Disk Array driver for HP Smart Array controllers, SCSI Tape module.
bd4f36d6 MM	3	* (C) Copyright 2001, 2007 Hewlett-Packard Development Company, L.P.
1da177e4 LT	4	*
	5	* This program is free software; you can redistribute it and/or modify
	6	* it under the terms of the GNU General Public License as published by
bd4f36d6	7	* the Free Software Foundation; version 2 of the License.
1da177e4 LT	8	*
	9	* This program is distributed in the hope that it will be useful,
	10	* but WITHOUT ANY WARRANTY; without even the implied warranty of
bd4f36d6 MM	11	* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. See the GNU
bd4f36d6 MM	12	* General Public License for more details.
1da177e4 LT	13	*
	14	* You should have received a copy of the GNU General Public License
	15	* along with this program; if not, write to the Free Software
bd4f36d6 MM	16	* Foundation, Inc., 59 Temple Place, Suite 300, Boston, MA
bd4f36d6 MM	17	* 02111-1307, USA.
1da177e4 LT	18	*
	19	* Questions/Comments/Bugfixes to iss_storagedev@hp.com
	20	*
	21	*/
	22	#ifdef CONFIG_CISS_SCSI_TAPE
	23	#ifndef _CCISS_SCSI_H_
	24	#define _CCISS_SCSI_H_
	25
	26	#include <scsi/scsicam.h> /* possibly irrelevant, since we don't show disks */
	27
b028461d	28	/* the scsi id of the adapter... */
1da177e4	29	#define SELF_SCSI_ID 15
b028461d	30	/* 15 is somewhat arbitrary, since the scsi-2 bus
	31	that's presented by the driver to the OS is
	32	fabricated. The "real" scsi-3 bus the
	33	hardware presents is fabricated too.
	34	The actual, honest-to-goodness physical
	35	bus that the devices are attached to is not
	36	addressible natively, and may in fact turn
	37	out to be not scsi at all. */
1da177e4	38
1da177e4 LT	39
	40	/*
	41
1da177e4 LT	42	If the upper scsi layer tries to track how many commands we have
	43	outstanding, it will be operating under the misapprehension that it is
	44	the only one sending us requests. We also have the block interface,
	45	which is where most requests must surely come from, so the upper layer's
	46	notion of how many requests we have outstanding will be wrong most or
	47	all of the time.
	48
	49	Note, the normal SCSI mid-layer error handling doesn't work well
	50	for this driver because 1) it takes the io_request_lock before
	51	calling error handlers and uses a local variable to store flags,
	52	so the io_request_lock cannot be released and interrupts enabled
	53	inside the error handlers, and, the error handlers cannot poll
	54	for command completion because they might get commands from the
	55	block half of the driver completing, and not know what to do
	56	with them. That's what we get for making a hybrid scsi/block
	57	driver, I suppose.
	58
	59	*/
	60
	61	struct cciss_scsi_dev_t {
	62	int devtype;
	63	int bus, target, lun; /* as presented to the OS */
	64	unsigned char scsi3addr[8]; /* as presented to the HW */
905bd78f	65	unsigned char device_id[16]; /* from inquiry pg. 0x83 */
	66	unsigned char vendor[8]; /* bytes 8-15 of inquiry data */
	67	unsigned char model[16]; /* bytes 16-31 of inquiry data */
	68	unsigned char revision[4]; /* bytes 32-35 of inquiry data */
1da177e4 LT	69	};
	70
	71	struct cciss_scsi_hba_t {
	72	char *name;
	73	int ndevices;
	74	#define CCISS_MAX_SCSI_DEVS_PER_HBA 16
	75	struct cciss_scsi_dev_t dev[CCISS_MAX_SCSI_DEVS_PER_HBA];
	76	};
	77
	78	#endif /* _CCISS_SCSI_H_ */
	79	#endif /* CONFIG_CISS_SCSI_TAPE */