[deliverable/linux.git] / drivers / block / mtip32xx / mtip32xx.h

/*
 * mtip32xx.h - Header file for the P320 SSD Block Driver
 *   Copyright (C) 2011 Micron Technology, Inc.
 *
 * Portions of this code were derived from works subjected to the
 * following copyright:
 *    Copyright (C) 2009 Integrated Device Technology, Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 */

#ifndef __MTIP32XX_H__
#define __MTIP32XX_H__

#include <linux/spinlock.h>
#include <linux/rwsem.h>
#include <linux/ata.h>
#include <linux/interrupt.h>
#include <linux/genhd.h>

/* Offset of Subsystem Device ID in pci confoguration space */
#define PCI_SUBSYSTEM_DEVICEID	0x2E

/* offset of Device Control register in PCIe extended capabilites space */
#define PCIE_CONFIG_EXT_DEVICE_CONTROL_OFFSET	0x48

/* check for erase mode support during secure erase */
#define MTIP_SEC_ERASE_MODE     0x2

/* # of times to retry timed out/failed IOs */
#define MTIP_MAX_RETRIES	2

/* Various timeout values in ms */
#define MTIP_NCQ_CMD_TIMEOUT_MS      15000
#define MTIP_IOCTL_CMD_TIMEOUT_MS    5000
#define MTIP_INT_CMD_TIMEOUT_MS      5000
#define MTIP_QUIESCE_IO_TIMEOUT_MS   (MTIP_NCQ_CMD_TIMEOUT_MS * \
				     (MTIP_MAX_RETRIES + 1))

/* check for timeouts every 500ms */
#define MTIP_TIMEOUT_CHECK_PERIOD	500

/* ftl rebuild */
#define MTIP_FTL_REBUILD_OFFSET		142
#define MTIP_FTL_REBUILD_MAGIC		0xED51
#define MTIP_FTL_REBUILD_TIMEOUT_MS	2400000

/* unaligned IO handling */
#define MTIP_MAX_UNALIGNED_SLOTS	2

/* Macro to extract the tag bit number from a tag value. */
#define MTIP_TAG_BIT(tag)	(tag & 0x1F)

/*
 * Macro to extract the tag index from a tag value. The index
 * is used to access the correct s_active/Command Issue register based
 * on the tag value.
 */
#define MTIP_TAG_INDEX(tag)	(tag >> 5)

/*
 * Maximum number of scatter gather entries
 * a single command may have.
 */
#define MTIP_MAX_SG		504

/*
 * Maximum number of slot groups (Command Issue & s_active registers)
 * NOTE: This is the driver maximum; check dd->slot_groups for actual value.
 */
#define MTIP_MAX_SLOT_GROUPS	8

/* Internal command tag. */
#define MTIP_TAG_INTERNAL	0

/* Micron Vendor ID & P320x SSD Device ID */
#define PCI_VENDOR_ID_MICRON    0x1344
#define P320H_DEVICE_ID		0x5150
#define P320M_DEVICE_ID		0x5151
#define P320S_DEVICE_ID		0x5152
#define P325M_DEVICE_ID		0x5153
#define P420H_DEVICE_ID		0x5160
#define P420M_DEVICE_ID		0x5161
#define P425M_DEVICE_ID		0x5163

/* Driver name and version strings */
#define MTIP_DRV_NAME		"mtip32xx"
#define MTIP_DRV_VERSION	"1.3.1"

/* Maximum number of minor device numbers per device. */
#define MTIP_MAX_MINORS		16

/* Maximum number of supported command slots. */
#define MTIP_MAX_COMMAND_SLOTS	(MTIP_MAX_SLOT_GROUPS * 32)

/*
 * Per-tag bitfield size in longs.
 * Linux bit manipulation functions
 * (i.e. test_and_set_bit, find_next_zero_bit)
 * manipulate memory in longs, so we try to make the math work.
 * take the slot groups and find the number of longs, rounding up.
 * Careful! i386 and x86_64 use different size longs!
 */
#define U32_PER_LONG	(sizeof(long) / sizeof(u32))
#define SLOTBITS_IN_LONGS ((MTIP_MAX_SLOT_GROUPS + \
					(U32_PER_LONG-1))/U32_PER_LONG)

/* BAR number used to access the HBA registers. */
#define MTIP_ABAR		5

#ifdef DEBUG
 #define dbg_printk(format, arg...)	\
	printk(pr_fmt(format), ##arg);
#else
 #define dbg_printk(format, arg...)
#endif

#define MTIP_DFS_MAX_BUF_SIZE 1024

#define __force_bit2int (unsigned int __force)

enum {
	/* below are bit numbers in 'flags' defined in mtip_port */
	MTIP_PF_IC_ACTIVE_BIT       = 0, /* pio/ioctl */
	MTIP_PF_EH_ACTIVE_BIT       = 1, /* error handling */
	MTIP_PF_SE_ACTIVE_BIT       = 2, /* secure erase */
	MTIP_PF_DM_ACTIVE_BIT       = 3, /* download microcde */
	MTIP_PF_PAUSE_IO      =	((1 << MTIP_PF_IC_ACTIVE_BIT) |
				(1 << MTIP_PF_EH_ACTIVE_BIT) |
				(1 << MTIP_PF_SE_ACTIVE_BIT) |
				(1 << MTIP_PF_DM_ACTIVE_BIT)),

	MTIP_PF_SVC_THD_ACTIVE_BIT  = 4,
	MTIP_PF_ISSUE_CMDS_BIT      = 5,
	MTIP_PF_REBUILD_BIT         = 6,
	MTIP_PF_SR_CLEANUP_BIT      = 7,
	MTIP_PF_SVC_THD_STOP_BIT    = 8,

	/* below are bit numbers in 'dd_flag' defined in driver_data */
	MTIP_DDF_SEC_LOCK_BIT	    = 0,
	MTIP_DDF_REMOVE_PENDING_BIT = 1,
	MTIP_DDF_OVER_TEMP_BIT      = 2,
	MTIP_DDF_WRITE_PROTECT_BIT  = 3,
	MTIP_DDF_REMOVE_DONE_BIT    = 4,
	MTIP_DDF_CLEANUP_BIT        = 5,
	MTIP_DDF_RESUME_BIT         = 6,
	MTIP_DDF_INIT_DONE_BIT      = 7,
	MTIP_DDF_REBUILD_FAILED_BIT = 8,

	MTIP_DDF_STOP_IO      = ((1 << MTIP_DDF_REMOVE_PENDING_BIT) |
				(1 << MTIP_DDF_SEC_LOCK_BIT) |
				(1 << MTIP_DDF_OVER_TEMP_BIT) |
				(1 << MTIP_DDF_WRITE_PROTECT_BIT) |
				(1 << MTIP_DDF_REBUILD_FAILED_BIT)),

};

struct smart_attr {
	u8 attr_id;
	u16 flags;
	u8 cur;
	u8 worst;
	u32 data;
	u8 res[3];
} __packed;

struct mtip_work {
	struct work_struct work;
	void *port;
	int cpu_binding;
	u32 completed;
} ____cacheline_aligned_in_smp;

#define DEFINE_HANDLER(group)                                  \
	void mtip_workq_sdbf##group(struct work_struct *work)       \
	{                                                      \
		struct mtip_work *w = (struct mtip_work *) work;         \
		mtip_workq_sdbfx(w->port, group, w->completed);     \
	}

#define MTIP_TRIM_TIMEOUT_MS		240000
#define MTIP_MAX_TRIM_ENTRIES		8
#define MTIP_MAX_TRIM_ENTRY_LEN		0xfff8

struct mtip_trim_entry {
	u32 lba;   /* starting lba of region */
	u16 rsvd;  /* unused */
	u16 range; /* # of 512b blocks to trim */
} __packed;

struct mtip_trim {
	/* Array of regions to trim */
	struct mtip_trim_entry entry[MTIP_MAX_TRIM_ENTRIES];
} __packed;

/* Register Frame Information Structure (FIS), host to device. */
struct host_to_dev_fis {
	/*
	 * FIS type.
	 * - 27h Register FIS, host to device.
	 * - 34h Register FIS, device to host.
	 * - 39h DMA Activate FIS, device to host.
	 * - 41h DMA Setup FIS, bi-directional.
	 * - 46h Data FIS, bi-directional.
	 * - 58h BIST Activate FIS, bi-directional.
	 * - 5Fh PIO Setup FIS, device to host.
	 * - A1h Set Device Bits FIS, device to host.
	 */
	unsigned char type;
	unsigned char opts;
	unsigned char command;
	unsigned char features;

	union {
		unsigned char lba_low;
		unsigned char sector;
	};
	union {
		unsigned char lba_mid;
		unsigned char cyl_low;
	};
	union {
		unsigned char lba_hi;
		unsigned char cyl_hi;
	};
	union {
		unsigned char device;
		unsigned char head;
	};

	union {
		unsigned char lba_low_ex;
		unsigned char sector_ex;
	};
	union {
		unsigned char lba_mid_ex;
		unsigned char cyl_low_ex;
	};
	union {
		unsigned char lba_hi_ex;
		unsigned char cyl_hi_ex;
	};
	unsigned char features_ex;

	unsigned char sect_count;
	unsigned char sect_cnt_ex;
	unsigned char res2;
	unsigned char control;

	unsigned int res3;
};

/* Command header structure. */
struct mtip_cmd_hdr {
	/*
	 * Command options.
	 * - Bits 31:16 Number of PRD entries.
	 * - Bits 15:8 Unused in this implementation.
	 * - Bit 7 Prefetch bit, informs the drive to prefetch PRD entries.
	 * - Bit 6 Write bit, should be set when writing data to the device.
	 * - Bit 5 Unused in this implementation.
	 * - Bits 4:0 Length of the command FIS in DWords (DWord = 4 bytes).
	 */
	unsigned int opts;
	/* This field is unsed when using NCQ. */
	union {
		unsigned int byte_count;
		unsigned int status;
	};
	/*
	 * Lower 32 bits of the command table address associated with this
	 * header. The command table addresses must be 128 byte aligned.
	 */
	unsigned int ctba;
	/*
	 * If 64 bit addressing is used this field is the upper 32 bits
	 * of the command table address associated with this command.
	 */
	unsigned int ctbau;
	/* Reserved and unused. */
	unsigned int res[4];
};

/* Command scatter gather structure (PRD). */
struct mtip_cmd_sg {
	/*
	 * Low 32 bits of the data buffer address. For P320 this
	 * address must be 8 byte aligned signified by bits 2:0 being
	 * set to 0.
	 */
	unsigned int dba;
	/*
	 * When 64 bit addressing is used this field is the upper
	 * 32 bits of the data buffer address.
	 */
	unsigned int dba_upper;
	/* Unused. */
	unsigned int reserved;
	/*
	 * Bit 31: interrupt when this data block has been transferred.
	 * Bits 30..22: reserved
	 * Bits 21..0: byte count (minus 1).  For P320 the byte count must be
	 * 8 byte aligned signified by bits 2:0 being set to 1.
	 */
	unsigned int info;
};
struct mtip_port;

/* Structure used to describe a command. */
struct mtip_cmd {

	struct mtip_cmd_hdr *command_header; /* ptr to command header entry */

	dma_addr_t command_header_dma; /* corresponding physical address */

	void *command; /* ptr to command table entry */

	dma_addr_t command_dma; /* corresponding physical address */

	void *comp_data; /* data passed to completion function comp_func() */
	/*
	 * Completion function called by the ISR upon completion of
	 * a command.
	 */
	void (*comp_func)(struct mtip_port *port,
				int tag,
				struct mtip_cmd *cmd,
				int status);

	int scatter_ents; /* Number of scatter list entries used */

	int unaligned; /* command is unaligned on 4k boundary */

	struct scatterlist sg[MTIP_MAX_SG]; /* Scatter list entries */

	int retries; /* The number of retries left for this command. */

	int direction; /* Data transfer direction */
};

/* Structure used to describe a port. */
struct mtip_port {
	/* Pointer back to the driver data for this port. */
	struct driver_data *dd;
	/*
	 * Used to determine if the data pointed to by the
	 * identify field is valid.
	 */
	unsigned long identify_valid;
	/* Base address of the memory mapped IO for the port. */
	void __iomem *mmio;
	/* Array of pointers to the memory mapped s_active registers. */
	void __iomem *s_active[MTIP_MAX_SLOT_GROUPS];
	/* Array of pointers to the memory mapped completed registers. */
	void __iomem *completed[MTIP_MAX_SLOT_GROUPS];
	/* Array of pointers to the memory mapped Command Issue registers. */
	void __iomem *cmd_issue[MTIP_MAX_SLOT_GROUPS];
	/*
	 * Pointer to the beginning of the command header memory as used
	 * by the driver.
	 */
	void *command_list;
	/*
	 * Pointer to the beginning of the command header memory as used
	 * by the DMA.
	 */
	dma_addr_t command_list_dma;
	/*
	 * Pointer to the beginning of the RX FIS memory as used
	 * by the driver.
	 */
	void *rxfis;
	/*
	 * Pointer to the beginning of the RX FIS memory as used
	 * by the DMA.
	 */
	dma_addr_t rxfis_dma;
	/*
	 * Pointer to the DMA region for RX Fis, Identify, RLE10, and SMART
	 */
	void *block1;
	/*
	 * DMA address of region for RX Fis, Identify, RLE10, and SMART
	 */
	dma_addr_t block1_dma;
	/*
	 * Pointer to the beginning of the identify data memory as used
	 * by the driver.
	 */
	u16 *identify;
	/*
	 * Pointer to the beginning of the identify data memory as used
	 * by the DMA.
	 */
	dma_addr_t identify_dma;
	/*
	 * Pointer to the beginning of a sector buffer that is used
	 * by the driver when issuing internal commands.
	 */
	u16 *sector_buffer;
	/*
	 * Pointer to the beginning of a sector buffer that is used
	 * by the DMA when the driver issues internal commands.
	 */
	dma_addr_t sector_buffer_dma;
	/*
	 * Bit significant, used to determine if a command slot has
	 * been allocated. i.e. the slot is in use.  Bits are cleared
	 * when the command slot and all associated data structures
	 * are no longer needed.
	 */
	u16 *log_buf;
	dma_addr_t log_buf_dma;

	u8 *smart_buf;
	dma_addr_t smart_buf_dma;

	unsigned long allocated[SLOTBITS_IN_LONGS];
	/*
	 * used to queue commands when an internal command is in progress
	 * or error handling is active
	 */
	unsigned long cmds_to_issue[SLOTBITS_IN_LONGS];
	/* Used by mtip_service_thread to wait for an event */
	wait_queue_head_t svc_wait;
	/*
	 * indicates the state of the port. Also, helps the service thread
	 * to determine its action on wake up.
	 */
	unsigned long flags;
	/*
	 * Timer used to complete commands that have been active for too long.
	 */
	unsigned long ic_pause_timer;

	/* Semaphore to control queue depth of unaligned IOs */
	struct semaphore cmd_slot_unal;

	/* Spinlock for working around command-issue bug. */
	spinlock_t cmd_issue_lock[MTIP_MAX_SLOT_GROUPS];
};

/*
 * Driver private data structure.
 *
 * One structure is allocated per probed device.
 */
struct driver_data {
	void __iomem *mmio; /* Base address of the HBA registers. */

	int major; /* Major device number. */

	int instance; /* Instance number. First device probed is 0, ... */

	struct gendisk *disk; /* Pointer to our gendisk structure. */

	struct pci_dev *pdev; /* Pointer to the PCI device structure. */

	struct request_queue *queue; /* Our request queue. */

	struct blk_mq_tag_set tags; /* blk_mq tags */

	struct mtip_port *port; /* Pointer to the port data structure. */

	unsigned product_type; /* magic value declaring the product type */

	unsigned slot_groups; /* number of slot groups the product supports */

	unsigned long index; /* Index to determine the disk name */

	unsigned long dd_flag; /* NOTE: use atomic bit operations on this */

	struct task_struct *mtip_svc_handler; /* task_struct of svc thd */

	struct dentry *dfs_node;

	bool trim_supp; /* flag indicating trim support */

	bool sr;

	int numa_node; /* NUMA support */

	char workq_name[32];

	struct workqueue_struct *isr_workq;

	atomic_t irq_workers_active;

	struct mtip_work work[MTIP_MAX_SLOT_GROUPS];

	int isr_binding;

	struct block_device *bdev;

	struct list_head online_list; /* linkage for online list */

	struct list_head remove_list; /* linkage for removing list */

	int unal_qdepth; /* qdepth of unaligned IO queue */
};

#endif
Commit	Line	Data
88523a61 SB	1	/*
	2	* mtip32xx.h - Header file for the P320 SSD Block Driver
	3	* Copyright (C) 2011 Micron Technology, Inc.
	4	*
	5	* Portions of this code were derived from works subjected to the
	6	* following copyright:
	7	* Copyright (C) 2009 Integrated Device Technology, Inc.
	8	*
	9	* This program is free software; you can redistribute it and/or modify
	10	* it under the terms of the GNU General Public License as published by
	11	* the Free Software Foundation; either version 2 of the License, or
	12	* (at your option) any later version.
	13	*
	14	* This program is distributed in the hope that it will be useful,
	15	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	16	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	17	* GNU General Public License for more details.
	18	*
	19	*/
	20
	21	#ifndef __MTIP32XX_H__
	22	#define __MTIP32XX_H__
	23
	24	#include <linux/spinlock.h>
	25	#include <linux/rwsem.h>
	26	#include <linux/ata.h>
	27	#include <linux/interrupt.h>
	28	#include <linux/genhd.h>
88523a61 SB	29
	30	/* Offset of Subsystem Device ID in pci confoguration space */
	31	#define PCI_SUBSYSTEM_DEVICEID 0x2E
	32
	33	/* offset of Device Control register in PCIe extended capabilites space */
	34	#define PCIE_CONFIG_EXT_DEVICE_CONTROL_OFFSET 0x48
	35
4453bc88	36	/* check for erase mode support during secure erase */
4b9e8845	37	#define MTIP_SEC_ERASE_MODE 0x2
4453bc88	38
c74b0f58 AT	39	/* # of times to retry timed out/failed IOs */
c74b0f58 AT	40	#define MTIP_MAX_RETRIES 2
88523a61 SB	41
88523a61 SB	42	/* Various timeout values in ms */
9b204fbf AT	43	#define MTIP_NCQ_CMD_TIMEOUT_MS 15000
	44	#define MTIP_IOCTL_CMD_TIMEOUT_MS 5000
	45	#define MTIP_INT_CMD_TIMEOUT_MS 5000
	46	#define MTIP_QUIESCE_IO_TIMEOUT_MS (MTIP_NCQ_CMD_TIMEOUT_MS * \
	47	(MTIP_MAX_RETRIES + 1))
88523a61 SB	48
	49	/* check for timeouts every 500ms */
	50	#define MTIP_TIMEOUT_CHECK_PERIOD 500
	51
	52	/* ftl rebuild */
	53	#define MTIP_FTL_REBUILD_OFFSET 142
60ec0eec	54	#define MTIP_FTL_REBUILD_MAGIC 0xED51
88523a61 SB	55	#define MTIP_FTL_REBUILD_TIMEOUT_MS 2400000
88523a61 SB	56
2077d947	57	/* unaligned IO handling */
5a98268e	58	#define MTIP_MAX_UNALIGNED_SLOTS 2
2077d947	59
88523a61	60	/* Macro to extract the tag bit number from a tag value. */
60ec0eec	61	#define MTIP_TAG_BIT(tag) (tag & 0x1F)
88523a61 SB	62
	63	/*
	64	* Macro to extract the tag index from a tag value. The index
	65	* is used to access the correct s_active/Command Issue register based
	66	* on the tag value.
	67	*/
	68	#define MTIP_TAG_INDEX(tag) (tag >> 5)
	69
	70	/*
	71	* Maximum number of scatter gather entries
	72	* a single command may have.
	73	*/
188b9f49	74	#define MTIP_MAX_SG 504
88523a61 SB	75
	76	/*
	77	* Maximum number of slot groups (Command Issue & s_active registers)
	78	* NOTE: This is the driver maximum; check dd->slot_groups for actual value.
	79	*/
	80	#define MTIP_MAX_SLOT_GROUPS 8
	81
	82	/* Internal command tag. */
	83	#define MTIP_TAG_INTERNAL 0
	84
	85	/* Micron Vendor ID & P320x SSD Device ID */
	86	#define PCI_VENDOR_ID_MICRON 0x1344
1a131458 AT	87	#define P320H_DEVICE_ID 0x5150
	88	#define P320M_DEVICE_ID 0x5151
	89	#define P320S_DEVICE_ID 0x5152
	90	#define P325M_DEVICE_ID 0x5153
	91	#define P420H_DEVICE_ID 0x5160
	92	#define P420M_DEVICE_ID 0x5161
	93	#define P425M_DEVICE_ID 0x5163
88523a61 SB	94
	95	/* Driver name and version strings */
	96	#define MTIP_DRV_NAME "mtip32xx"
5eb9291c	97	#define MTIP_DRV_VERSION "1.3.1"
88523a61 SB	98
	99	/* Maximum number of minor device numbers per device. */
	100	#define MTIP_MAX_MINORS 16
	101
	102	/* Maximum number of supported command slots. */
	103	#define MTIP_MAX_COMMAND_SLOTS (MTIP_MAX_SLOT_GROUPS * 32)
	104
	105	/*
	106	* Per-tag bitfield size in longs.
	107	* Linux bit manipulation functions
	108	* (i.e. test_and_set_bit, find_next_zero_bit)
	109	* manipulate memory in longs, so we try to make the math work.
	110	* take the slot groups and find the number of longs, rounding up.
	111	* Careful! i386 and x86_64 use different size longs!
	112	*/
	113	#define U32_PER_LONG (sizeof(long) / sizeof(u32))
	114	#define SLOTBITS_IN_LONGS ((MTIP_MAX_SLOT_GROUPS + \
	115	(U32_PER_LONG-1))/U32_PER_LONG)
	116
	117	/* BAR number used to access the HBA registers. */
	118	#define MTIP_ABAR 5
	119
88523a61 SB	120	#ifdef DEBUG
	121	#define dbg_printk(format, arg...) \
	122	printk(pr_fmt(format), ##arg);
	123	#else
	124	#define dbg_printk(format, arg...)
	125	#endif
	126
7b421d24 AT	127	#define MTIP_DFS_MAX_BUF_SIZE 1024
7b421d24 AT	128
60ec0eec AT	129	#define __force_bit2int (unsigned int __force)
60ec0eec AT	130
8ce80093 AT	131	enum {
	132	/* below are bit numbers in 'flags' defined in mtip_port */
	133	MTIP_PF_IC_ACTIVE_BIT = 0, /* pio/ioctl */
	134	MTIP_PF_EH_ACTIVE_BIT = 1, /* error handling */
	135	MTIP_PF_SE_ACTIVE_BIT = 2, /* secure erase */
	136	MTIP_PF_DM_ACTIVE_BIT = 3, /* download microcde */
0caff003 AT	137	MTIP_PF_PAUSE_IO = ((1 << MTIP_PF_IC_ACTIVE_BIT) \|
	138	(1 << MTIP_PF_EH_ACTIVE_BIT) \|
	139	(1 << MTIP_PF_SE_ACTIVE_BIT) \|
8ce80093 AT	140	(1 << MTIP_PF_DM_ACTIVE_BIT)),
	141
	142	MTIP_PF_SVC_THD_ACTIVE_BIT = 4,
	143	MTIP_PF_ISSUE_CMDS_BIT = 5,
	144	MTIP_PF_REBUILD_BIT = 6,
8f8b8995	145	MTIP_PF_SR_CLEANUP_BIT = 7,
8ce80093 AT	146	MTIP_PF_SVC_THD_STOP_BIT = 8,
	147
	148	/* below are bit numbers in 'dd_flag' defined in driver_data */
12a166c9	149	MTIP_DDF_SEC_LOCK_BIT = 0,
8ce80093 AT	150	MTIP_DDF_REMOVE_PENDING_BIT = 1,
	151	MTIP_DDF_OVER_TEMP_BIT = 2,
	152	MTIP_DDF_WRITE_PROTECT_BIT = 3,
8f8b8995	153	MTIP_DDF_REMOVE_DONE_BIT = 4,
8ce80093 AT	154	MTIP_DDF_CLEANUP_BIT = 5,
	155	MTIP_DDF_RESUME_BIT = 6,
	156	MTIP_DDF_INIT_DONE_BIT = 7,
	157	MTIP_DDF_REBUILD_FAILED_BIT = 8,
8f8b8995 AT	158
	159	MTIP_DDF_STOP_IO = ((1 << MTIP_DDF_REMOVE_PENDING_BIT) \|
	160	(1 << MTIP_DDF_SEC_LOCK_BIT) \|
	161	(1 << MTIP_DDF_OVER_TEMP_BIT) \|
	162	(1 << MTIP_DDF_WRITE_PROTECT_BIT) \|
	163	(1 << MTIP_DDF_REBUILD_FAILED_BIT)),
	164
8ce80093	165	};
f6587217	166
836413e8	167	struct smart_attr {
f6587217 AT	168	u8 attr_id;
	169	u16 flags;
	170	u8 cur;
	171	u8 worst;
	172	u32 data;
	173	u8 res[3];
836413e8	174	} __packed;
f6587217	175
16c906e5 AT	176	struct mtip_work {
	177	struct work_struct work;
	178	void *port;
	179	int cpu_binding;
	180	u32 completed;
	181	} ____cacheline_aligned_in_smp;
	182
	183	#define DEFINE_HANDLER(group) \
	184	void mtip_workq_sdbf##group(struct work_struct *work) \
	185	{ \
	186	struct mtip_work w = (struct mtip_work ) work; \
	187	mtip_workq_sdbfx(w->port, group, w->completed); \
	188	}
	189
15283469 AT	190	#define MTIP_TRIM_TIMEOUT_MS 240000
15283469 AT	191	#define MTIP_MAX_TRIM_ENTRIES 8
0caff003	192	#define MTIP_MAX_TRIM_ENTRY_LEN 0xfff8
15283469 AT	193
	194	struct mtip_trim_entry {
	195	u32 lba; /* starting lba of region */
	196	u16 rsvd; /* unused */
	197	u16 range; /* # of 512b blocks to trim */
	198	} __packed;
	199
	200	struct mtip_trim {
	201	/* Array of regions to trim */
	202	struct mtip_trim_entry entry[MTIP_MAX_TRIM_ENTRIES];
	203	} __packed;
	204
88523a61 SB	205	/* Register Frame Information Structure (FIS), host to device. */
	206	struct host_to_dev_fis {
	207	/*
	208	* FIS type.
	209	* - 27h Register FIS, host to device.
	210	* - 34h Register FIS, device to host.
	211	* - 39h DMA Activate FIS, device to host.
	212	* - 41h DMA Setup FIS, bi-directional.
	213	* - 46h Data FIS, bi-directional.
	214	* - 58h BIST Activate FIS, bi-directional.
	215	* - 5Fh PIO Setup FIS, device to host.
	216	* - A1h Set Device Bits FIS, device to host.
	217	*/
	218	unsigned char type;
	219	unsigned char opts;
	220	unsigned char command;
	221	unsigned char features;
	222
	223	union {
	224	unsigned char lba_low;
	225	unsigned char sector;
	226	};
	227	union {
	228	unsigned char lba_mid;
	229	unsigned char cyl_low;
	230	};
	231	union {
	232	unsigned char lba_hi;
	233	unsigned char cyl_hi;
	234	};
	235	union {
	236	unsigned char device;
	237	unsigned char head;
	238	};
	239
	240	union {
	241	unsigned char lba_low_ex;
	242	unsigned char sector_ex;
	243	};
	244	union {
	245	unsigned char lba_mid_ex;
	246	unsigned char cyl_low_ex;
	247	};
	248	union {
	249	unsigned char lba_hi_ex;
	250	unsigned char cyl_hi_ex;
	251	};
	252	unsigned char features_ex;
	253
	254	unsigned char sect_count;
	255	unsigned char sect_cnt_ex;
	256	unsigned char res2;
	257	unsigned char control;
	258
	259	unsigned int res3;
	260	};
	261
	262	/* Command header structure. */
	263	struct mtip_cmd_hdr {
	264	/*
	265	* Command options.
	266	* - Bits 31:16 Number of PRD entries.
	267	* - Bits 15:8 Unused in this implementation.
	268	* - Bit 7 Prefetch bit, informs the drive to prefetch PRD entries.
269	* - Bit 6 Write bit, should be set when writing data to the device.
270	* - Bit 5 Unused in this implementation.
271	* - Bits 4:0 Length of the command FIS in DWords (DWord = 4 bytes).
272	*/
273	unsigned int opts;
274	/* This field is unsed when using NCQ. */
275	union {
276	unsigned int byte_count;
277	unsigned int status;
278	};
279	/*
280	* Lower 32 bits of the command table address associated with this
281	* header. The command table addresses must be 128 byte aligned.
282	*/
283	unsigned int ctba;
284	/*
285	* If 64 bit addressing is used this field is the upper 32 bits
286	* of the command table address associated with this command.
287	*/
288	unsigned int ctbau;
289	/* Reserved and unused. */
290	unsigned int res[4];
291	};
292
293	/* Command scatter gather structure (PRD). */
294	struct mtip_cmd_sg {
295	/*
296	* Low 32 bits of the data buffer address. For P320 this
297	* address must be 8 byte aligned signified by bits 2:0 being
298	* set to 0.
299	*/
300	unsigned int dba;
301	/*
302	* When 64 bit addressing is used this field is the upper
303	* 32 bits of the data buffer address.
304	*/
305	unsigned int dba_upper;
306	/* Unused. */
307	unsigned int reserved;
308	/*
309	* Bit 31: interrupt when this data block has been transferred.
310	* Bits 30..22: reserved
311	* Bits 21..0: byte count (minus 1). For P320 the byte count must be
312	* 8 byte aligned signified by bits 2:0 being set to 1.
313	*/
314	unsigned int info;
315	};
316	struct mtip_port;
317
318	/* Structure used to describe a command. */
319	struct mtip_cmd {
320
321	struct mtip_cmd_hdr command_header; / ptr to command header entry */
322
323	dma_addr_t command_header_dma; /* corresponding physical address */
324
325	void command; / ptr to command table entry */
326
327	dma_addr_t command_dma; /* corresponding physical address */
328
329	void comp_data; / data passed to completion function comp_func() */
330	/*
331	* Completion function called by the ISR upon completion of
332	* a command.
333	*/
334	void (comp_func)(struct mtip_port port,
335	int tag,
ffc771b3	336	struct mtip_cmd *cmd,
88523a61	337	int status);
88523a61 SB	338
	339	int scatter_ents; /* Number of scatter list entries used */
	340
2077d947 AT	341	int unaligned; /* command is unaligned on 4k boundary */
2077d947 AT	342
88523a61 SB	343	struct scatterlist sg[MTIP_MAX_SG]; /* Scatter list entries */
	344
	345	int retries; /* The number of retries left for this command. */
	346
	347	int direction; /* Data transfer direction */
88523a61 SB	348	};
	349
	350	/* Structure used to describe a port. */
	351	struct mtip_port {
	352	/* Pointer back to the driver data for this port. */
	353	struct driver_data *dd;
	354	/*
	355	* Used to determine if the data pointed to by the
	356	* identify field is valid.
	357	*/
	358	unsigned long identify_valid;
	359	/* Base address of the memory mapped IO for the port. */
	360	void __iomem *mmio;
	361	/* Array of pointers to the memory mapped s_active registers. */
	362	void __iomem *s_active[MTIP_MAX_SLOT_GROUPS];
60ec0eec	363	/* Array of pointers to the memory mapped completed registers. */
88523a61 SB	364	void __iomem *completed[MTIP_MAX_SLOT_GROUPS];
	365	/* Array of pointers to the memory mapped Command Issue registers. */
	366	void __iomem *cmd_issue[MTIP_MAX_SLOT_GROUPS];
	367	/*
	368	* Pointer to the beginning of the command header memory as used
	369	* by the driver.
	370	*/
	371	void *command_list;
	372	/*
	373	* Pointer to the beginning of the command header memory as used
	374	* by the DMA.
	375	*/
	376	dma_addr_t command_list_dma;
	377	/*
	378	* Pointer to the beginning of the RX FIS memory as used
	379	* by the driver.
	380	*/
	381	void *rxfis;
	382	/*
	383	* Pointer to the beginning of the RX FIS memory as used
	384	* by the DMA.
	385	*/
	386	dma_addr_t rxfis_dma;
	387	/*
188b9f49	388	* Pointer to the DMA region for RX Fis, Identify, RLE10, and SMART
88523a61	389	*/
188b9f49	390	void *block1;
88523a61	391	/*
188b9f49	392	* DMA address of region for RX Fis, Identify, RLE10, and SMART
88523a61	393	*/
188b9f49	394	dma_addr_t block1_dma;
88523a61 SB	395	/*
	396	* Pointer to the beginning of the identify data memory as used
	397	* by the driver.
	398	*/
	399	u16 *identify;
	400	/*
	401	* Pointer to the beginning of the identify data memory as used
	402	* by the DMA.
	403	*/
	404	dma_addr_t identify_dma;
	405	/*
	406	* Pointer to the beginning of a sector buffer that is used
	407	* by the driver when issuing internal commands.
	408	*/
	409	u16 *sector_buffer;
	410	/*
	411	* Pointer to the beginning of a sector buffer that is used
	412	* by the DMA when the driver issues internal commands.
	413	*/
	414	dma_addr_t sector_buffer_dma;
	415	/*
	416	* Bit significant, used to determine if a command slot has
	417	* been allocated. i.e. the slot is in use. Bits are cleared
	418	* when the command slot and all associated data structures
	419	* are no longer needed.
	420	*/
f6587217 AT	421	u16 *log_buf;
	422	dma_addr_t log_buf_dma;
	423
	424	u8 *smart_buf;
	425	dma_addr_t smart_buf_dma;
	426
88523a61	427	unsigned long allocated[SLOTBITS_IN_LONGS];
60ec0eec AT	428	/*
	429	* used to queue commands when an internal command is in progress
	430	* or error handling is active
	431	*/
	432	unsigned long cmds_to_issue[SLOTBITS_IN_LONGS];
60ec0eec AT	433	/* Used by mtip_service_thread to wait for an event */
	434	wait_queue_head_t svc_wait;
	435	/*
	436	* indicates the state of the port. Also, helps the service thread
	437	* to determine its action on wake up.
	438	*/
	439	unsigned long flags;
88523a61 SB	440	/*
	441	* Timer used to complete commands that have been active for too long.
	442	*/
c74b0f58	443	unsigned long ic_pause_timer;
2077d947 AT	444
	445	/* Semaphore to control queue depth of unaligned IOs */
	446	struct semaphore cmd_slot_unal;
	447
88523a61	448	/* Spinlock for working around command-issue bug. */
16c906e5	449	spinlock_t cmd_issue_lock[MTIP_MAX_SLOT_GROUPS];
88523a61 SB	450	};
	451
	452	/*
	453	* Driver private data structure.
	454	*
	455	* One structure is allocated per probed device.
	456	*/
	457	struct driver_data {
	458	void __iomem mmio; / Base address of the HBA registers. */
	459
	460	int major; /* Major device number. */
	461
	462	int instance; /* Instance number. First device probed is 0, ... */
	463
88523a61 SB	464	struct gendisk disk; / Pointer to our gendisk structure. */
	465
	466	struct pci_dev pdev; / Pointer to the PCI device structure. */
	467
	468	struct request_queue queue; / Our request queue. */
88523a61	469
ffc771b3 JA	470	struct blk_mq_tag_set tags; /* blk_mq tags */
ffc771b3 JA	471
88523a61 SB	472	struct mtip_port port; / Pointer to the port data structure. */
88523a61 SB	473
88523a61 SB	474	unsigned product_type; /* magic value declaring the product type */
	475
	476	unsigned slot_groups; /* number of slot groups the product supports */
	477
88523a61 SB	478	unsigned long index; /* Index to determine the disk name */
88523a61 SB	479
45038367	480	unsigned long dd_flag; /* NOTE: use atomic bit operations on this */
88523a61	481
60ec0eec	482	struct task_struct mtip_svc_handler; / task_struct of svc thd */
7b421d24 AT	483
7b421d24 AT	484	struct dentry *dfs_node;
16c906e5	485
15283469 AT	486	bool trim_supp; /* flag indicating trim support */
15283469 AT	487
8f8b8995 AT	488	bool sr;
8f8b8995 AT	489
16c906e5 AT	490	int numa_node; /* NUMA support */
	491
	492	char workq_name[32];
	493
	494	struct workqueue_struct *isr_workq;
	495
16c906e5 AT	496	atomic_t irq_workers_active;
16c906e5 AT	497
f45c40a9 SB	498	struct mtip_work work[MTIP_MAX_SLOT_GROUPS];
f45c40a9 SB	499
16c906e5	500	int isr_binding;
0caff003	501
8f8b8995 AT	502	struct block_device *bdev;
8f8b8995 AT	503
0caff003 AT	504	struct list_head online_list; /* linkage for online list */
	505
	506	struct list_head remove_list; /* linkage for removing list */
f45c40a9 SB	507
f45c40a9 SB	508	int unal_qdepth; /* qdepth of unaligned IO queue */
88523a61 SB	509	};
88523a61 SB	510
88523a61	511	#endif