[deliverable/linux.git] / drivers / bluetooth / Kconfig


menu "Bluetooth device drivers"
	depends on BT

config BT_BCM
	tristate

config BT_HCIBTUSB
	tristate "HCI USB driver"
	depends on USB
	select BT_BCM
	help
	  Bluetooth HCI USB driver.
	  This driver is required if you want to use Bluetooth devices with
	  USB interface.

	  Say Y here to compile support for Bluetooth USB devices into the
	  kernel or say M to compile it as module (btusb).

config BT_HCIBTSDIO
	tristate "HCI SDIO driver"
	depends on MMC
	help
	  Bluetooth HCI SDIO driver.
	  This driver is required if you want to use Bluetooth device with
	  SDIO interface.

	  Say Y here to compile support for Bluetooth SDIO devices into the
	  kernel or say M to compile it as module (btsdio).

config BT_HCIUART
	tristate "HCI UART driver"
	depends on TTY
	help
	  Bluetooth HCI UART driver.
	  This driver is required if you want to use Bluetooth devices with
	  serial port interface. You will also need this driver if you have
	  UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card
	  adapter and BrainBoxes Bluetooth PC Card.

	  Say Y here to compile support for Bluetooth UART devices into the
	  kernel or say M to compile it as module (hci_uart).

config BT_HCIUART_H4
	bool "UART (H4) protocol support"
	depends on BT_HCIUART
	help
	  UART (H4) is serial protocol for communication between Bluetooth
	  device and host. This protocol is required for most Bluetooth devices
	  with UART interface, including PCMCIA and CF cards.

	  Say Y here to compile support for HCI UART (H4) protocol.

config BT_HCIUART_BCSP
	bool "BCSP protocol support"
	depends on BT_HCIUART
	select BITREVERSE
	help
	  BCSP (BlueCore Serial Protocol) is serial protocol for communication
	  between Bluetooth device and host. This protocol is required for non
	  USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and
	  CF cards.

	  Say Y here to compile support for HCI BCSP protocol.

config BT_HCIUART_ATH3K
	bool "Atheros AR300x serial support"
	depends on BT_HCIUART
	select BT_HCIUART_H4
	help
	  HCIATH3K (HCI Atheros AR300x) is a serial protocol for
	  communication between host and Atheros AR300x Bluetooth devices.
	  This protocol enables AR300x chips to be enabled with
	  power management support.
	  Enable this if you have Atheros AR300x serial Bluetooth device.

	  Say Y here to compile support for HCI UART ATH3K protocol.

config BT_HCIUART_LL
	bool "HCILL protocol support"
	depends on BT_HCIUART
	help
	  HCILL (HCI Low Level) is a serial protocol for communication
	  between Bluetooth device and host. This protocol is required for
	  serial Bluetooth devices that are based on Texas Instruments'
	  BRF chips.

	  Say Y here to compile support for HCILL protocol.

config BT_HCIUART_3WIRE
	bool "Three-wire UART (H5) protocol support"
	depends on BT_HCIUART
	help
	  The HCI Three-wire UART Transport Layer makes it possible to
	  user the Bluetooth HCI over a serial port interface. The HCI
	  Three-wire UART Transport Layer assumes that the UART
	  communication may have bit errors, overrun errors or burst
	  errors and thereby making CTS/RTS lines unnecessary.

	  Say Y here to compile support for Three-wire UART protocol.

config BT_HCIUART_INTEL
	bool "Intel protocol support"
	depends on BT_HCIUART
	help
	  The Intel protocol support enables Bluetooth HCI over serial
	  port interface for Intel Bluetooth controllers.

	  Say Y here to compile support for Intel protocol.

config BT_HCIUART_BCM
	bool "Broadcom protocol support"
	depends on BT_HCIUART
	select BT_BCM
	help
	  The Broadcom protocol support enables Bluetooth HCI over serial
	  port interface for Broadcom Bluetooth controllers.

	  Say Y here to compile support for Broadcom protocol.

config BT_HCIBCM203X
	tristate "HCI BCM203x USB driver"
	depends on USB
	select FW_LOADER
	help
	  Bluetooth HCI BCM203x USB driver.
	  This driver provides the firmware loading mechanism for the Broadcom
	  Blutonium based devices.

	  Say Y here to compile support for HCI BCM203x devices into the
	  kernel or say M to compile it as module (bcm203x).

config BT_HCIBPA10X
	tristate "HCI BPA10x USB driver"
	depends on USB
	help
	  Bluetooth HCI BPA10x USB driver.
	  This driver provides support for the Digianswer BPA 100/105 Bluetooth
	  sniffer devices.

	  Say Y here to compile support for HCI BPA10x devices into the
	  kernel or say M to compile it as module (bpa10x).

config BT_HCIBFUSB
	tristate "HCI BlueFRITZ! USB driver"
	depends on USB
	select FW_LOADER
	help
	  Bluetooth HCI BlueFRITZ! USB driver.
	  This driver provides support for Bluetooth USB devices with AVM
	  interface:
	     AVM BlueFRITZ! USB

	  Say Y here to compile support for HCI BFUSB devices into the
	  kernel or say M to compile it as module (bfusb).

config BT_HCIDTL1
	tristate "HCI DTL1 (PC Card) driver"
	depends on PCMCIA
	help
	  Bluetooth HCI DTL1 (PC Card) driver.
	  This driver provides support for Bluetooth PCMCIA devices with
	  Nokia DTL1 interface:
	     Nokia Bluetooth Card
	     Socket Bluetooth CF Card

	  Say Y here to compile support for HCI DTL1 devices into the
	  kernel or say M to compile it as module (dtl1_cs).

config BT_HCIBT3C
	tristate "HCI BT3C (PC Card) driver"
	depends on PCMCIA
	select FW_LOADER
	help
	  Bluetooth HCI BT3C (PC Card) driver.
	  This driver provides support for Bluetooth PCMCIA devices with
	  3Com BT3C interface:
	     3Com Bluetooth Card (3CRWB6096)
	     HP Bluetooth Card

	  Say Y here to compile support for HCI BT3C devices into the
	  kernel or say M to compile it as module (bt3c_cs).

config BT_HCIBLUECARD
	tristate "HCI BlueCard (PC Card) driver"
	depends on PCMCIA
	help
	  Bluetooth HCI BlueCard (PC Card) driver.
	  This driver provides support for Bluetooth PCMCIA devices with
	  Anycom BlueCard interface:
	     Anycom Bluetooth PC Card
	     Anycom Bluetooth CF Card

	  Say Y here to compile support for HCI BlueCard devices into the
	  kernel or say M to compile it as module (bluecard_cs).

config BT_HCIBTUART
	tristate "HCI UART (PC Card) device driver"
	depends on PCMCIA
	help
	  Bluetooth HCI UART (PC Card) driver.
	  This driver provides support for Bluetooth PCMCIA devices with
	  an UART interface:
	     Xircom CreditCard Bluetooth Adapter
	     Xircom RealPort2 Bluetooth Adapter
	     Sphinx PICO Card
	     H-Soft blue+Card
	     Cyber-blue Compact Flash Card

	  Say Y here to compile support for HCI UART devices into the
	  kernel or say M to compile it as module (btuart_cs).

config BT_HCIVHCI
	tristate "HCI VHCI (Virtual HCI device) driver"
	help
	  Bluetooth Virtual HCI device driver.
	  This driver is required if you want to use HCI Emulation software.

	  Say Y here to compile support for virtual HCI devices into the
	  kernel or say M to compile it as module (hci_vhci).

config BT_MRVL
	tristate "Marvell Bluetooth driver support"
	help
	  The core driver to support Marvell Bluetooth devices.

	  This driver is required if you want to support
	  Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897.

	  Say Y here to compile Marvell Bluetooth driver
	  into the kernel or say M to compile it as module.

config BT_MRVL_SDIO
	tristate "Marvell BT-over-SDIO driver"
	depends on BT_MRVL && MMC
	select FW_LOADER
	select WANT_DEV_COREDUMP
	help
	  The driver for Marvell Bluetooth chipsets with SDIO interface.

	  This driver is required if you want to use Marvell Bluetooth
	  devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897
	  chipsets are supported.

	  Say Y here to compile support for Marvell BT-over-SDIO driver
	  into the kernel or say M to compile it as module.

config BT_ATH3K
	tristate "Atheros firmware download driver"
	depends on BT_HCIBTUSB
	select FW_LOADER
	help
	  Bluetooth firmware download driver.
	  This driver loads the firmware into the Atheros Bluetooth
	  chipset.

	  Say Y here to compile support for "Atheros firmware download driver"
	  into the kernel or say M to compile it as module (ath3k).

config BT_WILINK
	tristate "Texas Instruments WiLink7 driver"
	depends on TI_ST
	help
	  This enables the Bluetooth driver for Texas Instrument's BT/FM/GPS
	  combo devices. This makes use of shared transport line discipline
	  core driver to communicate with the BT core of the combo chip.

	  Say Y here to compile support for Texas Instrument's WiLink7 driver
	  into the kernel or say M to compile it as module (btwilink).

endmenu
Commit	Line	Data
1da177e4 LT	1
	2	menu "Bluetooth device drivers"
	3	depends on BT
	4
4fba30f0 MH	5	config BT_BCM
	6	tristate
	7
5e23b923	8	config BT_HCIBTUSB
9bfa35fe MH	9	tristate "HCI USB driver"
9bfa35fe MH	10	depends on USB
1df1f591	11	select BT_BCM
5e23b923 MH	12	help
	13	Bluetooth HCI USB driver.
	14	This driver is required if you want to use Bluetooth devices with
	15	USB interface.
	16
5e23b923 MH	17	Say Y here to compile support for Bluetooth USB devices into the
	18	kernel or say M to compile it as module (btusb).
	19
ddbaf13e MH	20	config BT_HCIBTSDIO
	21	tristate "HCI SDIO driver"
	22	depends on MMC
	23	help
	24	Bluetooth HCI SDIO driver.
	25	This driver is required if you want to use Bluetooth device with
	26	SDIO interface.
	27
	28	Say Y here to compile support for Bluetooth SDIO devices into the
	29	kernel or say M to compile it as module (btsdio).
	30
1da177e4 LT	31	config BT_HCIUART
1da177e4 LT	32	tristate "HCI UART driver"
4f73bc4d	33	depends on TTY
1da177e4 LT	34	help
	35	Bluetooth HCI UART driver.
	36	This driver is required if you want to use Bluetooth devices with
8ba8b4c0 SG	37	serial port interface. You will also need this driver if you have
8ba8b4c0 SG	38	UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card
1da177e4 LT	39	adapter and BrainBoxes Bluetooth PC Card.
	40
	41	Say Y here to compile support for Bluetooth UART devices into the
	42	kernel or say M to compile it as module (hci_uart).
	43
	44	config BT_HCIUART_H4
	45	bool "UART (H4) protocol support"
	46	depends on BT_HCIUART
	47	help
8ba8b4c0 SG	48	UART (H4) is serial protocol for communication between Bluetooth
	49	device and host. This protocol is required for most Bluetooth devices
	50	with UART interface, including PCMCIA and CF cards.
1da177e4 LT	51
	52	Say Y here to compile support for HCI UART (H4) protocol.
	53
	54	config BT_HCIUART_BCSP
	55	bool "BCSP protocol support"
	56	depends on BT_HCIUART
d3a8eab0	57	select BITREVERSE
1da177e4	58	help
8ba8b4c0	59	BCSP (BlueCore Serial Protocol) is serial protocol for communication
1da177e4 LT	60	between Bluetooth device and host. This protocol is required for non
	61	USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and
	62	CF cards.
	63
	64	Say Y here to compile support for HCI BCSP protocol.
	65
b3190df6 SS	66	config BT_HCIUART_ATH3K
	67	bool "Atheros AR300x serial support"
	68	depends on BT_HCIUART
d90aa682	69	select BT_HCIUART_H4
b3190df6 SS	70	help
	71	HCIATH3K (HCI Atheros AR300x) is a serial protocol for
	72	communication between host and Atheros AR300x Bluetooth devices.
	73	This protocol enables AR300x chips to be enabled with
	74	power management support.
	75	Enable this if you have Atheros AR300x serial Bluetooth device.
	76
	77	Say Y here to compile support for HCI UART ATH3K protocol.
	78
166d2f6a OBC	79	config BT_HCIUART_LL
	80	bool "HCILL protocol support"
	81	depends on BT_HCIUART
	82	help
	83	HCILL (HCI Low Level) is a serial protocol for communication
	84	between Bluetooth device and host. This protocol is required for
	85	serial Bluetooth devices that are based on Texas Instruments'
	86	BRF chips.
	87
	88	Say Y here to compile support for HCILL protocol.
	89
7dec65c8 JH	90	config BT_HCIUART_3WIRE
	91	bool "Three-wire UART (H5) protocol support"
	92	depends on BT_HCIUART
	93	help
	94	The HCI Three-wire UART Transport Layer makes it possible to
	95	user the Bluetooth HCI over a serial port interface. The HCI
	96	Three-wire UART Transport Layer assumes that the UART
	97	communication may have bit errors, overrun errors or burst
	98	errors and thereby making CTS/RTS lines unnecessary.
	99
	100	Say Y here to compile support for Three-wire UART protocol.
	101
16e3887f MH	102	config BT_HCIUART_INTEL
	103	bool "Intel protocol support"
	104	depends on BT_HCIUART
	105	help
	106	The Intel protocol support enables Bluetooth HCI over serial
	107	port interface for Intel Bluetooth controllers.
	108
	109	Say Y here to compile support for Intel protocol.
	110
e9a2dd26 MH	111	config BT_HCIUART_BCM
	112	bool "Broadcom protocol support"
	113	depends on BT_HCIUART
3e0ac12a	114	select BT_BCM
e9a2dd26 MH	115	help
	116	The Broadcom protocol support enables Bluetooth HCI over serial
	117	port interface for Broadcom Bluetooth controllers.
	118
	119	Say Y here to compile support for Broadcom protocol.
	120
1da177e4 LT	121	config BT_HCIBCM203X
	122	tristate "HCI BCM203x USB driver"
	123	depends on USB
	124	select FW_LOADER
	125	help
	126	Bluetooth HCI BCM203x USB driver.
	127	This driver provides the firmware loading mechanism for the Broadcom
	128	Blutonium based devices.
	129
	130	Say Y here to compile support for HCI BCM203x devices into the
	131	kernel or say M to compile it as module (bcm203x).
	132
	133	config BT_HCIBPA10X
	134	tristate "HCI BPA10x USB driver"
	135	depends on USB
	136	help
	137	Bluetooth HCI BPA10x USB driver.
	138	This driver provides support for the Digianswer BPA 100/105 Bluetooth
	139	sniffer devices.
	140
	141	Say Y here to compile support for HCI BPA10x devices into the
	142	kernel or say M to compile it as module (bpa10x).
	143
	144	config BT_HCIBFUSB
	145	tristate "HCI BlueFRITZ! USB driver"
	146	depends on USB
	147	select FW_LOADER
	148	help
	149	Bluetooth HCI BlueFRITZ! USB driver.
	150	This driver provides support for Bluetooth USB devices with AVM
	151	interface:
	152	AVM BlueFRITZ! USB
	153
	154	Say Y here to compile support for HCI BFUSB devices into the
	155	kernel or say M to compile it as module (bfusb).
	156
	157	config BT_HCIDTL1
	158	tristate "HCI DTL1 (PC Card) driver"
	159	depends on PCMCIA
	160	help
	161	Bluetooth HCI DTL1 (PC Card) driver.
	162	This driver provides support for Bluetooth PCMCIA devices with
	163	Nokia DTL1 interface:
	164	Nokia Bluetooth Card
	165	Socket Bluetooth CF Card
	166
	167	Say Y here to compile support for HCI DTL1 devices into the
	168	kernel or say M to compile it as module (dtl1_cs).
	169
	170	config BT_HCIBT3C
	171	tristate "HCI BT3C (PC Card) driver"
	172	depends on PCMCIA
	173	select FW_LOADER
	174	help
	175	Bluetooth HCI BT3C (PC Card) driver.
	176	This driver provides support for Bluetooth PCMCIA devices with
	177	3Com BT3C interface:
	178	3Com Bluetooth Card (3CRWB6096)
	179	HP Bluetooth Card
	180
	181	Say Y here to compile support for HCI BT3C devices into the
	182	kernel or say M to compile it as module (bt3c_cs).
	183
	184	config BT_HCIBLUECARD
185	tristate "HCI BlueCard (PC Card) driver"
186	depends on PCMCIA
187	help
188	Bluetooth HCI BlueCard (PC Card) driver.
189	This driver provides support for Bluetooth PCMCIA devices with
190	Anycom BlueCard interface:
191	Anycom Bluetooth PC Card
192	Anycom Bluetooth CF Card
193
194	Say Y here to compile support for HCI BlueCard devices into the
195	kernel or say M to compile it as module (bluecard_cs).
196
197	config BT_HCIBTUART
198	tristate "HCI UART (PC Card) device driver"
199	depends on PCMCIA
200	help
201	Bluetooth HCI UART (PC Card) driver.
202	This driver provides support for Bluetooth PCMCIA devices with
203	an UART interface:
204	Xircom CreditCard Bluetooth Adapter
205	Xircom RealPort2 Bluetooth Adapter
206	Sphinx PICO Card
207	H-Soft blue+Card
208	Cyber-blue Compact Flash Card
209
210	Say Y here to compile support for HCI UART devices into the
211	kernel or say M to compile it as module (btuart_cs).
212
213	config BT_HCIVHCI
214	tristate "HCI VHCI (Virtual HCI device) driver"
215	help
216	Bluetooth Virtual HCI device driver.
217	This driver is required if you want to use HCI Emulation software.
218
219	Say Y here to compile support for virtual HCI devices into the
220	kernel or say M to compile it as module (hci_vhci).
221
132ff4e5 BZ	222	config BT_MRVL
132ff4e5 BZ	223	tristate "Marvell Bluetooth driver support"
132ff4e5 BZ	224	help
	225	The core driver to support Marvell Bluetooth devices.
	226
	227	This driver is required if you want to support
3907d558	228	Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897.
132ff4e5 BZ	229
	230	Say Y here to compile Marvell Bluetooth driver
	231	into the kernel or say M to compile it as module.
	232
789221ec BZ	233	config BT_MRVL_SDIO
	234	tristate "Marvell BT-over-SDIO driver"
	235	depends on BT_MRVL && MMC
e7a25f98	236	select FW_LOADER
dc759613	237	select WANT_DEV_COREDUMP
789221ec BZ	238	help
	239	The driver for Marvell Bluetooth chipsets with SDIO interface.
	240
	241	This driver is required if you want to use Marvell Bluetooth
3907d558	242	devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897
2ac654f7	243	chipsets are supported.
789221ec BZ	244
	245	Say Y here to compile support for Marvell BT-over-SDIO driver
	246	into the kernel or say M to compile it as module.
	247
9670d80a VK	248	config BT_ATH3K
	249	tristate "Atheros firmware download driver"
	250	depends on BT_HCIBTUSB
	251	select FW_LOADER
	252	help
	253	Bluetooth firmware download driver.
	254	This driver loads the firmware into the Atheros Bluetooth
	255	chipset.
1da177e4	256
9670d80a VK	257	Say Y here to compile support for "Atheros firmware download driver"
	258	into the kernel or say M to compile it as module (ath3k).
	259
363907af PS	260	config BT_WILINK
	261	tristate "Texas Instruments WiLink7 driver"
	262	depends on TI_ST
	263	help
	264	This enables the Bluetooth driver for Texas Instrument's BT/FM/GPS
	265	combo devices. This makes use of shared transport line discipline
	266	core driver to communicate with the BT core of the combo chip.
	267
	268	Say Y here to compile support for Texas Instrument's WiLink7 driver
22e8ee12 PM	269	into the kernel or say M to compile it as module (btwilink).
22e8ee12 PM	270
9670d80a	271	endmenu