Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * | |
3 | * (c) 1999 by Computone Corporation | |
4 | * | |
5 | ******************************************************************************** | |
6 | * | |
7 | * PACKAGE: Linux tty Device Driver for IntelliPort family of multiport | |
8 | * serial I/O controllers. | |
9 | * | |
10 | * DESCRIPTION: Mainline code for the device driver | |
11 | * | |
12 | *******************************************************************************/ | |
13 | // ToDo: | |
14 | // | |
15 | // Fix the immediate DSS_NOW problem. | |
16 | // Work over the channel stats return logic in ip2_ipl_ioctl so they | |
17 | // make sense for all 256 possible channels and so the user space | |
18 | // utilities will compile and work properly. | |
19 | // | |
20 | // Done: | |
21 | // | |
22 | // 1.2.14 /\/\|=mhw=|\/\/ | |
23 | // Added bounds checking to ip2_ipl_ioctl to avoid potential terroristic acts. | |
24 | // Changed the definition of ip2trace to be more consistent with kernel style | |
25 | // Thanks to Andreas Dilger <adilger@turbolabs.com> for these updates | |
26 | // | |
27 | // 1.2.13 /\/\|=mhw=|\/\/ | |
28 | // DEVFS: Renamed ttf/{n} to tts/F{n} and cuf/{n} to cua/F{n} to conform | |
29 | // to agreed devfs serial device naming convention. | |
30 | // | |
31 | // 1.2.12 /\/\|=mhw=|\/\/ | |
32 | // Cleaned up some remove queue cut and paste errors | |
33 | // | |
34 | // 1.2.11 /\/\|=mhw=|\/\/ | |
35 | // Clean up potential NULL pointer dereferences | |
36 | // Clean up devfs registration | |
37 | // Add kernel command line parsing for io and irq | |
9c4b562a | 38 | // Compile defaults for io and irq are now set in ip2.c not ip2.h! |
1da177e4 LT |
39 | // Reworked poll_only hack for explicit parameter setting |
40 | // You must now EXPLICITLY set poll_only = 1 or set all irqs to 0 | |
41 | // Merged ip2_loadmain and old_ip2_init | |
42 | // Converted all instances of interruptible_sleep_on into queue calls | |
43 | // Most of these had no race conditions but better to clean up now | |
44 | // | |
45 | // 1.2.10 /\/\|=mhw=|\/\/ | |
46 | // Fixed the bottom half interrupt handler and enabled USE_IQI | |
47 | // to split the interrupt handler into a formal top-half / bottom-half | |
48 | // Fixed timing window on high speed processors that queued messages to | |
49 | // the outbound mail fifo faster than the board could handle. | |
50 | // | |
51 | // 1.2.9 | |
52 | // Four box EX was barfing on >128k kmalloc, made structure smaller by | |
53 | // reducing output buffer size | |
54 | // | |
55 | // 1.2.8 | |
56 | // Device file system support (MHW) | |
57 | // | |
58 | // 1.2.7 | |
59 | // Fixed | |
60 | // Reload of ip2 without unloading ip2main hangs system on cat of /proc/modules | |
61 | // | |
62 | // 1.2.6 | |
63 | //Fixes DCD problems | |
64 | // DCD was not reported when CLOCAL was set on call to TIOCMGET | |
65 | // | |
66 | //Enhancements: | |
67 | // TIOCMGET requests and waits for status return | |
68 | // No DSS interrupts enabled except for DCD when needed | |
69 | // | |
70 | // For internal use only | |
71 | // | |
72 | //#define IP2DEBUG_INIT | |
73 | //#define IP2DEBUG_OPEN | |
74 | //#define IP2DEBUG_WRITE | |
75 | //#define IP2DEBUG_READ | |
76 | //#define IP2DEBUG_IOCTL | |
77 | //#define IP2DEBUG_IPL | |
78 | ||
79 | //#define IP2DEBUG_TRACE | |
80 | //#define DEBUG_FIFO | |
81 | ||
82 | /************/ | |
83 | /* Includes */ | |
84 | /************/ | |
1da177e4 LT |
85 | |
86 | #include <linux/ctype.h> | |
87 | #include <linux/string.h> | |
88 | #include <linux/fcntl.h> | |
89 | #include <linux/errno.h> | |
90 | #include <linux/module.h> | |
91 | #include <linux/signal.h> | |
92 | #include <linux/sched.h> | |
1da177e4 LT |
93 | #include <linux/timer.h> |
94 | #include <linux/interrupt.h> | |
95 | #include <linux/pci.h> | |
96 | #include <linux/mm.h> | |
97 | #include <linux/slab.h> | |
98 | #include <linux/major.h> | |
99 | #include <linux/wait.h> | |
100 | #include <linux/device.h> | |
101 | ||
102 | #include <linux/tty.h> | |
103 | #include <linux/tty_flip.h> | |
104 | #include <linux/termios.h> | |
105 | #include <linux/tty_driver.h> | |
106 | #include <linux/serial.h> | |
107 | #include <linux/ptrace.h> | |
108 | #include <linux/ioport.h> | |
109 | ||
110 | #include <linux/cdk.h> | |
111 | #include <linux/comstats.h> | |
112 | #include <linux/delay.h> | |
113 | #include <linux/bitops.h> | |
114 | ||
115 | #include <asm/system.h> | |
116 | #include <asm/io.h> | |
117 | #include <asm/irq.h> | |
118 | ||
119 | #include <linux/vmalloc.h> | |
120 | #include <linux/init.h> | |
1da177e4 LT |
121 | |
122 | #include <asm/uaccess.h> | |
123 | ||
9c4b562a AB |
124 | #include "ip2types.h" |
125 | #include "ip2trace.h" | |
126 | #include "ip2ioctl.h" | |
127 | #include "ip2.h" | |
128 | #include "i2ellis.h" | |
129 | #include "i2lib.h" | |
1da177e4 LT |
130 | |
131 | /***************** | |
132 | * /proc/ip2mem * | |
133 | *****************/ | |
134 | ||
135 | #include <linux/proc_fs.h> | |
136 | ||
137 | static int ip2_read_procmem(char *, char **, off_t, int); | |
138 | static int ip2_read_proc(char *, char **, off_t, int, int *, void * ); | |
139 | ||
140 | /********************/ | |
141 | /* Type Definitions */ | |
142 | /********************/ | |
143 | ||
144 | /*************/ | |
145 | /* Constants */ | |
146 | /*************/ | |
147 | ||
148 | /* String constants to identify ourselves */ | |
149 | static char *pcName = "Computone IntelliPort Plus multiport driver"; | |
150 | static char *pcVersion = "1.2.14"; | |
151 | ||
152 | /* String constants for port names */ | |
153 | static char *pcDriver_name = "ip2"; | |
154 | static char *pcIpl = "ip2ipl"; | |
155 | ||
156 | /* Serial subtype definitions */ | |
157 | #define SERIAL_TYPE_NORMAL 1 | |
158 | ||
159 | // cheezy kludge or genius - you decide? | |
160 | int ip2_loadmain(int *, int *, unsigned char *, int); | |
161 | static unsigned char *Fip_firmware; | |
162 | static int Fip_firmware_size; | |
163 | ||
164 | /***********************/ | |
165 | /* Function Prototypes */ | |
166 | /***********************/ | |
167 | ||
168 | /* Global module entry functions */ | |
169 | ||
170 | /* Private (static) functions */ | |
171 | static int ip2_open(PTTY, struct file *); | |
172 | static void ip2_close(PTTY, struct file *); | |
d9e39538 | 173 | static int ip2_write(PTTY, const unsigned char *, int); |
1da177e4 LT |
174 | static void ip2_putchar(PTTY, unsigned char); |
175 | static void ip2_flush_chars(PTTY); | |
176 | static int ip2_write_room(PTTY); | |
177 | static int ip2_chars_in_buf(PTTY); | |
178 | static void ip2_flush_buffer(PTTY); | |
179 | static int ip2_ioctl(PTTY, struct file *, UINT, ULONG); | |
180 | static void ip2_set_termios(PTTY, struct termios *); | |
181 | static void ip2_set_line_discipline(PTTY); | |
182 | static void ip2_throttle(PTTY); | |
183 | static void ip2_unthrottle(PTTY); | |
184 | static void ip2_stop(PTTY); | |
185 | static void ip2_start(PTTY); | |
186 | static void ip2_hangup(PTTY); | |
187 | static int ip2_tiocmget(struct tty_struct *tty, struct file *file); | |
188 | static int ip2_tiocmset(struct tty_struct *tty, struct file *file, | |
189 | unsigned int set, unsigned int clear); | |
190 | ||
191 | static void set_irq(int, int); | |
c4028958 | 192 | static void ip2_interrupt_bh(struct work_struct *work); |
7d12e780 | 193 | static irqreturn_t ip2_interrupt(int irq, void *dev_id); |
1da177e4 LT |
194 | static void ip2_poll(unsigned long arg); |
195 | static inline void service_all_boards(void); | |
c4028958 DH |
196 | static void do_input(struct work_struct *); |
197 | static void do_status(struct work_struct *); | |
1da177e4 LT |
198 | |
199 | static void ip2_wait_until_sent(PTTY,int); | |
200 | ||
201 | static void set_params (i2ChanStrPtr, struct termios *); | |
202 | static int get_serial_info(i2ChanStrPtr, struct serial_struct __user *); | |
203 | static int set_serial_info(i2ChanStrPtr, struct serial_struct __user *); | |
204 | ||
205 | static ssize_t ip2_ipl_read(struct file *, char __user *, size_t, loff_t *); | |
206 | static ssize_t ip2_ipl_write(struct file *, const char __user *, size_t, loff_t *); | |
207 | static int ip2_ipl_ioctl(struct inode *, struct file *, UINT, ULONG); | |
208 | static int ip2_ipl_open(struct inode *, struct file *); | |
209 | ||
210 | static int DumpTraceBuffer(char __user *, int); | |
211 | static int DumpFifoBuffer( char __user *, int); | |
212 | ||
213 | static void ip2_init_board(int); | |
214 | static unsigned short find_eisa_board(int); | |
215 | ||
216 | /***************/ | |
217 | /* Static Data */ | |
218 | /***************/ | |
219 | ||
220 | static struct tty_driver *ip2_tty_driver; | |
221 | ||
222 | /* Here, then is a table of board pointers which the interrupt routine should | |
223 | * scan through to determine who it must service. | |
224 | */ | |
225 | static unsigned short i2nBoards; // Number of boards here | |
226 | ||
227 | static i2eBordStrPtr i2BoardPtrTable[IP2_MAX_BOARDS]; | |
228 | ||
229 | static i2ChanStrPtr DevTable[IP2_MAX_PORTS]; | |
230 | //DevTableMem just used to save addresses for kfree | |
231 | static void *DevTableMem[IP2_MAX_BOARDS]; | |
232 | ||
233 | /* This is the driver descriptor for the ip2ipl device, which is used to | |
234 | * download the loadware to the boards. | |
235 | */ | |
62322d25 | 236 | static const struct file_operations ip2_ipl = { |
1da177e4 LT |
237 | .owner = THIS_MODULE, |
238 | .read = ip2_ipl_read, | |
239 | .write = ip2_ipl_write, | |
240 | .ioctl = ip2_ipl_ioctl, | |
241 | .open = ip2_ipl_open, | |
242 | }; | |
243 | ||
244 | static unsigned long irq_counter = 0; | |
245 | static unsigned long bh_counter = 0; | |
246 | ||
247 | // Use immediate queue to service interrupts | |
248 | #define USE_IQI | |
249 | //#define USE_IQ // PCI&2.2 needs work | |
250 | ||
251 | /* The timer_list entry for our poll routine. If interrupt operation is not | |
252 | * selected, the board is serviced periodically to see if anything needs doing. | |
253 | */ | |
254 | #define POLL_TIMEOUT (jiffies + 1) | |
8d06afab | 255 | static DEFINE_TIMER(PollTimer, ip2_poll, 0, 0); |
1da177e4 LT |
256 | static char TimerOn; |
257 | ||
258 | #ifdef IP2DEBUG_TRACE | |
259 | /* Trace (debug) buffer data */ | |
260 | #define TRACEMAX 1000 | |
261 | static unsigned long tracebuf[TRACEMAX]; | |
262 | static int tracestuff; | |
263 | static int tracestrip; | |
264 | static int tracewrap; | |
265 | #endif | |
266 | ||
267 | /**********/ | |
268 | /* Macros */ | |
269 | /**********/ | |
270 | ||
271 | #if defined(MODULE) && defined(IP2DEBUG_OPEN) | |
272 | #define DBG_CNT(s) printk(KERN_DEBUG "(%s): [%x] refc=%d, ttyc=%d, modc=%x -> %s\n", \ | |
273 | tty->name,(pCh->flags),ip2_tty_driver->refcount, \ | |
274 | tty->count,/*GET_USE_COUNT(module)*/0,s) | |
275 | #else | |
276 | #define DBG_CNT(s) | |
277 | #endif | |
278 | ||
279 | /********/ | |
280 | /* Code */ | |
281 | /********/ | |
282 | ||
9c4b562a AB |
283 | #include "i2ellis.c" /* Extremely low-level interface services */ |
284 | #include "i2cmd.c" /* Standard loadware command definitions */ | |
285 | #include "i2lib.c" /* High level interface services */ | |
1da177e4 LT |
286 | |
287 | /* Configuration area for modprobe */ | |
288 | ||
289 | MODULE_AUTHOR("Doug McNash"); | |
290 | MODULE_DESCRIPTION("Computone IntelliPort Plus Driver"); | |
291 | ||
292 | static int poll_only = 0; | |
293 | ||
294 | static int Eisa_irq; | |
295 | static int Eisa_slot; | |
296 | ||
297 | static int iindx; | |
298 | static char rirqs[IP2_MAX_BOARDS]; | |
299 | static int Valid_Irqs[] = { 3, 4, 5, 7, 10, 11, 12, 15, 0}; | |
300 | ||
301 | /* for sysfs class support */ | |
ca8eca68 | 302 | static struct class *ip2_class; |
1da177e4 LT |
303 | |
304 | // Some functions to keep track of what irq's we have | |
305 | ||
673e321c | 306 | static int |
1da177e4 LT |
307 | is_valid_irq(int irq) |
308 | { | |
309 | int *i = Valid_Irqs; | |
310 | ||
311 | while ((*i != 0) && (*i != irq)) { | |
312 | i++; | |
313 | } | |
314 | return (*i); | |
315 | } | |
316 | ||
673e321c | 317 | static void |
1da177e4 LT |
318 | mark_requested_irq( char irq ) |
319 | { | |
320 | rirqs[iindx++] = irq; | |
321 | } | |
322 | ||
323 | #ifdef MODULE | |
673e321c | 324 | static int |
1da177e4 LT |
325 | clear_requested_irq( char irq ) |
326 | { | |
327 | int i; | |
328 | for ( i = 0; i < IP2_MAX_BOARDS; ++i ) { | |
329 | if (rirqs[i] == irq) { | |
330 | rirqs[i] = 0; | |
331 | return 1; | |
332 | } | |
333 | } | |
334 | return 0; | |
335 | } | |
336 | #endif | |
337 | ||
673e321c | 338 | static int |
1da177e4 LT |
339 | have_requested_irq( char irq ) |
340 | { | |
341 | // array init to zeros so 0 irq will not be requested as a side effect | |
342 | int i; | |
343 | for ( i = 0; i < IP2_MAX_BOARDS; ++i ) { | |
344 | if (rirqs[i] == irq) | |
345 | return 1; | |
346 | } | |
347 | return 0; | |
348 | } | |
349 | ||
350 | /******************************************************************************/ | |
351 | /* Function: init_module() */ | |
352 | /* Parameters: None */ | |
353 | /* Returns: Success (0) */ | |
354 | /* */ | |
355 | /* Description: */ | |
356 | /* This is a required entry point for an installable module. It simply calls */ | |
357 | /* the driver initialisation function and returns what it returns. */ | |
358 | /******************************************************************************/ | |
359 | #ifdef MODULE | |
360 | int | |
361 | init_module(void) | |
362 | { | |
363 | #ifdef IP2DEBUG_INIT | |
364 | printk (KERN_DEBUG "Loading module ...\n" ); | |
365 | #endif | |
366 | return 0; | |
367 | } | |
368 | #endif /* MODULE */ | |
369 | ||
370 | /******************************************************************************/ | |
371 | /* Function: cleanup_module() */ | |
372 | /* Parameters: None */ | |
373 | /* Returns: Nothing */ | |
374 | /* */ | |
375 | /* Description: */ | |
376 | /* This is a required entry point for an installable module. It has to return */ | |
377 | /* the device and the driver to a passive state. It should not be necessary */ | |
378 | /* to reset the board fully, especially as the loadware is downloaded */ | |
379 | /* externally rather than in the driver. We just want to disable the board */ | |
380 | /* and clear the loadware to a reset state. To allow this there has to be a */ | |
381 | /* way to detect whether the board has the loadware running at init time to */ | |
382 | /* handle subsequent installations of the driver. All memory allocated by the */ | |
383 | /* driver should be returned since it may be unloaded from memory. */ | |
384 | /******************************************************************************/ | |
385 | #ifdef MODULE | |
386 | void | |
387 | cleanup_module(void) | |
388 | { | |
389 | int err; | |
390 | int i; | |
391 | ||
392 | #ifdef IP2DEBUG_INIT | |
393 | printk (KERN_DEBUG "Unloading %s: version %s\n", pcName, pcVersion ); | |
394 | #endif | |
395 | /* Stop poll timer if we had one. */ | |
396 | if ( TimerOn ) { | |
397 | del_timer ( &PollTimer ); | |
398 | TimerOn = 0; | |
399 | } | |
400 | ||
401 | /* Reset the boards we have. */ | |
402 | for( i = 0; i < IP2_MAX_BOARDS; ++i ) { | |
403 | if ( i2BoardPtrTable[i] ) { | |
404 | iiReset( i2BoardPtrTable[i] ); | |
405 | } | |
406 | } | |
407 | ||
408 | /* The following is done at most once, if any boards were installed. */ | |
409 | for ( i = 0; i < IP2_MAX_BOARDS; ++i ) { | |
410 | if ( i2BoardPtrTable[i] ) { | |
411 | iiResetDelay( i2BoardPtrTable[i] ); | |
412 | /* free io addresses and Tibet */ | |
413 | release_region( ip2config.addr[i], 8 ); | |
ca8eca68 | 414 | class_device_destroy(ip2_class, MKDEV(IP2_IPL_MAJOR, 4 * i)); |
ca8eca68 | 415 | class_device_destroy(ip2_class, MKDEV(IP2_IPL_MAJOR, 4 * i + 1)); |
1da177e4 LT |
416 | } |
417 | /* Disable and remove interrupt handler. */ | |
418 | if ( (ip2config.irq[i] > 0) && have_requested_irq(ip2config.irq[i]) ) { | |
419 | free_irq ( ip2config.irq[i], (void *)&pcName); | |
420 | clear_requested_irq( ip2config.irq[i]); | |
421 | } | |
422 | } | |
ca8eca68 | 423 | class_destroy(ip2_class); |
1da177e4 LT |
424 | if ( ( err = tty_unregister_driver ( ip2_tty_driver ) ) ) { |
425 | printk(KERN_ERR "IP2: failed to unregister tty driver (%d)\n", err); | |
426 | } | |
427 | put_tty_driver(ip2_tty_driver); | |
428 | if ( ( err = unregister_chrdev ( IP2_IPL_MAJOR, pcIpl ) ) ) { | |
429 | printk(KERN_ERR "IP2: failed to unregister IPL driver (%d)\n", err); | |
430 | } | |
431 | remove_proc_entry("ip2mem", &proc_root); | |
432 | ||
433 | // free memory | |
434 | for (i = 0; i < IP2_MAX_BOARDS; i++) { | |
435 | void *pB; | |
436 | #ifdef CONFIG_PCI | |
437 | if (ip2config.type[i] == PCI && ip2config.pci_dev[i]) { | |
438 | pci_disable_device(ip2config.pci_dev[i]); | |
1aff0eca | 439 | pci_dev_put(ip2config.pci_dev[i]); |
1da177e4 LT |
440 | ip2config.pci_dev[i] = NULL; |
441 | } | |
442 | #endif | |
443 | if ((pB = i2BoardPtrTable[i]) != 0 ) { | |
444 | kfree ( pB ); | |
445 | i2BoardPtrTable[i] = NULL; | |
446 | } | |
447 | if ((DevTableMem[i]) != NULL ) { | |
448 | kfree ( DevTableMem[i] ); | |
449 | DevTableMem[i] = NULL; | |
450 | } | |
451 | } | |
452 | ||
453 | /* Cleanup the iiEllis subsystem. */ | |
454 | iiEllisCleanup(); | |
455 | #ifdef IP2DEBUG_INIT | |
456 | printk (KERN_DEBUG "IP2 Unloaded\n" ); | |
457 | #endif | |
458 | } | |
459 | #endif /* MODULE */ | |
460 | ||
b68e31d0 | 461 | static const struct tty_operations ip2_ops = { |
1da177e4 LT |
462 | .open = ip2_open, |
463 | .close = ip2_close, | |
464 | .write = ip2_write, | |
465 | .put_char = ip2_putchar, | |
466 | .flush_chars = ip2_flush_chars, | |
467 | .write_room = ip2_write_room, | |
468 | .chars_in_buffer = ip2_chars_in_buf, | |
469 | .flush_buffer = ip2_flush_buffer, | |
470 | .ioctl = ip2_ioctl, | |
471 | .throttle = ip2_throttle, | |
472 | .unthrottle = ip2_unthrottle, | |
473 | .set_termios = ip2_set_termios, | |
474 | .set_ldisc = ip2_set_line_discipline, | |
475 | .stop = ip2_stop, | |
476 | .start = ip2_start, | |
477 | .hangup = ip2_hangup, | |
478 | .read_proc = ip2_read_proc, | |
479 | .tiocmget = ip2_tiocmget, | |
480 | .tiocmset = ip2_tiocmset, | |
481 | }; | |
482 | ||
483 | /******************************************************************************/ | |
484 | /* Function: ip2_loadmain() */ | |
485 | /* Parameters: irq, io from command line of insmod et. al. */ | |
486 | /* pointer to fip firmware and firmware size for boards */ | |
487 | /* Returns: Success (0) */ | |
488 | /* */ | |
489 | /* Description: */ | |
490 | /* This was the required entry point for all drivers (now in ip2.c) */ | |
491 | /* It performs all */ | |
492 | /* initialisation of the devices and driver structures, and registers itself */ | |
493 | /* with the relevant kernel modules. */ | |
494 | /******************************************************************************/ | |
0f2ed4c6 TG |
495 | /* IRQF_DISABLED - if set blocks all interrupts else only this line */ |
496 | /* IRQF_SHARED - for shared irq PCI or maybe EISA only */ | |
1da177e4 LT |
497 | /* SA_RANDOM - can be source for cert. random number generators */ |
498 | #define IP2_SA_FLAGS 0 | |
499 | ||
500 | int | |
501 | ip2_loadmain(int *iop, int *irqp, unsigned char *firmware, int firmsize) | |
502 | { | |
503 | int i, j, box; | |
504 | int err = 0; | |
505 | int status = 0; | |
506 | static int loaded; | |
507 | i2eBordStrPtr pB = NULL; | |
508 | int rc = -1; | |
1aff0eca | 509 | static struct pci_dev *pci_dev_i = NULL; |
1da177e4 LT |
510 | |
511 | ip2trace (ITRC_NO_PORT, ITRC_INIT, ITRC_ENTER, 0 ); | |
512 | ||
513 | /* process command line arguments to modprobe or | |
514 | insmod i.e. iop & irqp */ | |
515 | /* irqp and iop should ALWAYS be specified now... But we check | |
516 | them individually just to be sure, anyways... */ | |
517 | for ( i = 0; i < IP2_MAX_BOARDS; ++i ) { | |
518 | if (iop) { | |
519 | ip2config.addr[i] = iop[i]; | |
520 | if (irqp) { | |
521 | if( irqp[i] >= 0 ) { | |
522 | ip2config.irq[i] = irqp[i]; | |
523 | } else { | |
524 | ip2config.irq[i] = 0; | |
525 | } | |
526 | // This is a little bit of a hack. If poll_only=1 on command | |
527 | // line back in ip2.c OR all IRQs on all specified boards are | |
528 | // explicitly set to 0, then drop to poll only mode and override | |
529 | // PCI or EISA interrupts. This superceeds the old hack of | |
530 | // triggering if all interrupts were zero (like da default). | |
531 | // Still a hack but less prone to random acts of terrorism. | |
532 | // | |
533 | // What we really should do, now that the IRQ default is set | |
534 | // to -1, is to use 0 as a hard coded, do not probe. | |
535 | // | |
536 | // /\/\|=mhw=|\/\/ | |
537 | poll_only |= irqp[i]; | |
538 | } | |
539 | } | |
540 | } | |
541 | poll_only = !poll_only; | |
542 | ||
543 | Fip_firmware = firmware; | |
544 | Fip_firmware_size = firmsize; | |
545 | ||
546 | /* Announce our presence */ | |
547 | printk( KERN_INFO "%s version %s\n", pcName, pcVersion ); | |
548 | ||
549 | // ip2 can be unloaded and reloaded for no good reason | |
550 | // we can't let that happen here or bad things happen | |
551 | // second load hoses board but not system - fixme later | |
552 | if (loaded) { | |
553 | printk( KERN_INFO "Still loaded\n" ); | |
554 | return 0; | |
555 | } | |
556 | loaded++; | |
557 | ||
558 | ip2_tty_driver = alloc_tty_driver(IP2_MAX_PORTS); | |
559 | if (!ip2_tty_driver) | |
560 | return -ENOMEM; | |
561 | ||
562 | /* Initialise the iiEllis subsystem. */ | |
563 | iiEllisInit(); | |
564 | ||
565 | /* Initialize arrays. */ | |
566 | memset( i2BoardPtrTable, 0, sizeof i2BoardPtrTable ); | |
567 | memset( DevTable, 0, sizeof DevTable ); | |
568 | ||
569 | /* Initialise all the boards we can find (up to the maximum). */ | |
570 | for ( i = 0; i < IP2_MAX_BOARDS; ++i ) { | |
571 | switch ( ip2config.addr[i] ) { | |
572 | case 0: /* skip this slot even if card is present */ | |
573 | break; | |
574 | default: /* ISA */ | |
575 | /* ISA address must be specified */ | |
576 | if ( (ip2config.addr[i] < 0x100) || (ip2config.addr[i] > 0x3f8) ) { | |
577 | printk ( KERN_ERR "IP2: Bad ISA board %d address %x\n", | |
578 | i, ip2config.addr[i] ); | |
579 | ip2config.addr[i] = 0; | |
580 | } else { | |
581 | ip2config.type[i] = ISA; | |
582 | ||
583 | /* Check for valid irq argument, set for polling if invalid */ | |
584 | if (ip2config.irq[i] && !is_valid_irq(ip2config.irq[i])) { | |
585 | printk(KERN_ERR "IP2: Bad IRQ(%d) specified\n",ip2config.irq[i]); | |
586 | ip2config.irq[i] = 0;// 0 is polling and is valid in that sense | |
587 | } | |
588 | } | |
589 | break; | |
590 | case PCI: | |
591 | #ifdef CONFIG_PCI | |
592 | { | |
1aff0eca | 593 | pci_dev_i = pci_get_device(PCI_VENDOR_ID_COMPUTONE, |
1da177e4 LT |
594 | PCI_DEVICE_ID_COMPUTONE_IP2EX, pci_dev_i); |
595 | if (pci_dev_i != NULL) { | |
596 | unsigned int addr; | |
597 | ||
598 | if (pci_enable_device(pci_dev_i)) { | |
599 | printk( KERN_ERR "IP2: can't enable PCI device at %s\n", | |
600 | pci_name(pci_dev_i)); | |
601 | break; | |
602 | } | |
603 | ip2config.type[i] = PCI; | |
1aff0eca | 604 | ip2config.pci_dev[i] = pci_dev_get(pci_dev_i); |
1da177e4 LT |
605 | status = |
606 | pci_read_config_dword(pci_dev_i, PCI_BASE_ADDRESS_1, &addr); | |
607 | if ( addr & 1 ) { | |
608 | ip2config.addr[i]=(USHORT)(addr&0xfffe); | |
609 | } else { | |
610 | printk( KERN_ERR "IP2: PCI I/O address error\n"); | |
611 | } | |
612 | ||
613 | // If the PCI BIOS assigned it, lets try and use it. If we | |
614 | // can't acquire it or it screws up, deal with it then. | |
615 | ||
616 | // if (!is_valid_irq(pci_irq)) { | |
617 | // printk( KERN_ERR "IP2: Bad PCI BIOS IRQ(%d)\n",pci_irq); | |
618 | // pci_irq = 0; | |
619 | // } | |
620 | ip2config.irq[i] = pci_dev_i->irq; | |
621 | } else { // ann error | |
622 | ip2config.addr[i] = 0; | |
623 | if (status == PCIBIOS_DEVICE_NOT_FOUND) { | |
624 | printk( KERN_ERR "IP2: PCI board %d not found\n", i ); | |
625 | } else { | |
626 | printk( KERN_ERR "IP2: PCI error 0x%x \n", status ); | |
627 | } | |
628 | } | |
629 | } | |
630 | #else | |
631 | printk( KERN_ERR "IP2: PCI card specified but PCI support not\n"); | |
632 | printk( KERN_ERR "IP2: configured in this kernel.\n"); | |
633 | printk( KERN_ERR "IP2: Recompile kernel with CONFIG_PCI defined!\n"); | |
634 | #endif /* CONFIG_PCI */ | |
635 | break; | |
636 | case EISA: | |
637 | if ( (ip2config.addr[i] = find_eisa_board( Eisa_slot + 1 )) != 0) { | |
638 | /* Eisa_irq set as side effect, boo */ | |
639 | ip2config.type[i] = EISA; | |
640 | } | |
641 | ip2config.irq[i] = Eisa_irq; | |
642 | break; | |
643 | } /* switch */ | |
644 | } /* for */ | |
1aff0eca AC |
645 | if (pci_dev_i) |
646 | pci_dev_put(pci_dev_i); | |
647 | ||
1da177e4 LT |
648 | for ( i = 0; i < IP2_MAX_BOARDS; ++i ) { |
649 | if ( ip2config.addr[i] ) { | |
650 | pB = kmalloc( sizeof(i2eBordStr), GFP_KERNEL); | |
651 | if ( pB != NULL ) { | |
652 | i2BoardPtrTable[i] = pB; | |
653 | memset( pB, 0, sizeof(i2eBordStr) ); | |
654 | iiSetAddress( pB, ip2config.addr[i], ii2DelayTimer ); | |
655 | iiReset( pB ); | |
656 | } else { | |
657 | printk(KERN_ERR "IP2: board memory allocation error\n"); | |
658 | } | |
659 | } | |
660 | } | |
661 | for ( i = 0; i < IP2_MAX_BOARDS; ++i ) { | |
662 | if ( ( pB = i2BoardPtrTable[i] ) != NULL ) { | |
663 | iiResetDelay( pB ); | |
664 | break; | |
665 | } | |
666 | } | |
667 | for ( i = 0; i < IP2_MAX_BOARDS; ++i ) { | |
668 | if ( i2BoardPtrTable[i] != NULL ) { | |
669 | ip2_init_board( i ); | |
670 | } | |
671 | } | |
672 | ||
673 | ip2trace (ITRC_NO_PORT, ITRC_INIT, 2, 0 ); | |
674 | ||
675 | ip2_tty_driver->owner = THIS_MODULE; | |
676 | ip2_tty_driver->name = "ttyF"; | |
1da177e4 LT |
677 | ip2_tty_driver->driver_name = pcDriver_name; |
678 | ip2_tty_driver->major = IP2_TTY_MAJOR; | |
679 | ip2_tty_driver->minor_start = 0; | |
680 | ip2_tty_driver->type = TTY_DRIVER_TYPE_SERIAL; | |
681 | ip2_tty_driver->subtype = SERIAL_TYPE_NORMAL; | |
682 | ip2_tty_driver->init_termios = tty_std_termios; | |
683 | ip2_tty_driver->init_termios.c_cflag = B9600|CS8|CREAD|HUPCL|CLOCAL; | |
331b8319 | 684 | ip2_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; |
1da177e4 LT |
685 | tty_set_operations(ip2_tty_driver, &ip2_ops); |
686 | ||
687 | ip2trace (ITRC_NO_PORT, ITRC_INIT, 3, 0 ); | |
688 | ||
689 | /* Register the tty devices. */ | |
690 | if ( ( err = tty_register_driver ( ip2_tty_driver ) ) ) { | |
691 | printk(KERN_ERR "IP2: failed to register tty driver (%d)\n", err); | |
692 | put_tty_driver(ip2_tty_driver); | |
693 | return -EINVAL; | |
694 | } else | |
695 | /* Register the IPL driver. */ | |
696 | if ( ( err = register_chrdev ( IP2_IPL_MAJOR, pcIpl, &ip2_ipl ) ) ) { | |
697 | printk(KERN_ERR "IP2: failed to register IPL device (%d)\n", err ); | |
698 | } else { | |
699 | /* create the sysfs class */ | |
ca8eca68 | 700 | ip2_class = class_create(THIS_MODULE, "ip2"); |
1da177e4 LT |
701 | if (IS_ERR(ip2_class)) { |
702 | err = PTR_ERR(ip2_class); | |
703 | goto out_chrdev; | |
704 | } | |
705 | } | |
706 | /* Register the read_procmem thing */ | |
707 | if (!create_proc_info_entry("ip2mem",0,&proc_root,ip2_read_procmem)) { | |
708 | printk(KERN_ERR "IP2: failed to register read_procmem\n"); | |
709 | } else { | |
710 | ||
711 | ip2trace (ITRC_NO_PORT, ITRC_INIT, 4, 0 ); | |
712 | /* Register the interrupt handler or poll handler, depending upon the | |
713 | * specified interrupt. | |
714 | */ | |
715 | ||
716 | for( i = 0; i < IP2_MAX_BOARDS; ++i ) { | |
717 | if ( 0 == ip2config.addr[i] ) { | |
718 | continue; | |
719 | } | |
720 | ||
721 | if ( NULL != ( pB = i2BoardPtrTable[i] ) ) { | |
53f46542 GKH |
722 | class_device_create(ip2_class, NULL, |
723 | MKDEV(IP2_IPL_MAJOR, 4 * i), | |
724 | NULL, "ipl%d", i); | |
53f46542 GKH |
725 | class_device_create(ip2_class, NULL, |
726 | MKDEV(IP2_IPL_MAJOR, 4 * i + 1), | |
727 | NULL, "stat%d", i); | |
1da177e4 LT |
728 | |
729 | for ( box = 0; box < ABS_MAX_BOXES; ++box ) | |
730 | { | |
731 | for ( j = 0; j < ABS_BIGGEST_BOX; ++j ) | |
732 | { | |
733 | if ( pB->i2eChannelMap[box] & (1 << j) ) | |
734 | { | |
735 | tty_register_device(ip2_tty_driver, | |
736 | j + ABS_BIGGEST_BOX * | |
737 | (box+i*ABS_MAX_BOXES), NULL); | |
738 | } | |
739 | } | |
740 | } | |
741 | } | |
742 | ||
743 | if (poll_only) { | |
744 | // Poll only forces driver to only use polling and | |
745 | // to ignore the probed PCI or EISA interrupts. | |
746 | ip2config.irq[i] = CIR_POLL; | |
747 | } | |
748 | if ( ip2config.irq[i] == CIR_POLL ) { | |
749 | retry: | |
750 | if (!TimerOn) { | |
751 | PollTimer.expires = POLL_TIMEOUT; | |
752 | add_timer ( &PollTimer ); | |
753 | TimerOn = 1; | |
754 | printk( KERN_INFO "IP2: polling\n"); | |
755 | } | |
756 | } else { | |
757 | if (have_requested_irq(ip2config.irq[i])) | |
758 | continue; | |
759 | rc = request_irq( ip2config.irq[i], ip2_interrupt, | |
0f2ed4c6 | 760 | IP2_SA_FLAGS | (ip2config.type[i] == PCI ? IRQF_SHARED : 0), |
1da177e4 LT |
761 | pcName, (void *)&pcName); |
762 | if (rc) { | |
763 | printk(KERN_ERR "IP2: an request_irq failed: error %d\n",rc); | |
764 | ip2config.irq[i] = CIR_POLL; | |
765 | printk( KERN_INFO "IP2: Polling %ld/sec.\n", | |
766 | (POLL_TIMEOUT - jiffies)); | |
767 | goto retry; | |
768 | } | |
769 | mark_requested_irq(ip2config.irq[i]); | |
770 | /* Initialise the interrupt handler bottom half (aka slih). */ | |
771 | } | |
772 | } | |
773 | for( i = 0; i < IP2_MAX_BOARDS; ++i ) { | |
774 | if ( i2BoardPtrTable[i] ) { | |
775 | set_irq( i, ip2config.irq[i] ); /* set and enable board interrupt */ | |
776 | } | |
777 | } | |
778 | } | |
779 | ip2trace (ITRC_NO_PORT, ITRC_INIT, ITRC_RETURN, 0 ); | |
780 | goto out; | |
781 | ||
1da177e4 LT |
782 | out_chrdev: |
783 | unregister_chrdev(IP2_IPL_MAJOR, "ip2"); | |
784 | out: | |
785 | return err; | |
786 | } | |
787 | ||
788 | EXPORT_SYMBOL(ip2_loadmain); | |
789 | ||
790 | /******************************************************************************/ | |
791 | /* Function: ip2_init_board() */ | |
792 | /* Parameters: Index of board in configuration structure */ | |
793 | /* Returns: Success (0) */ | |
794 | /* */ | |
795 | /* Description: */ | |
796 | /* This function initializes the specified board. The loadware is copied to */ | |
797 | /* the board, the channel structures are initialized, and the board details */ | |
798 | /* are reported on the console. */ | |
799 | /******************************************************************************/ | |
673e321c | 800 | static void |
1da177e4 LT |
801 | ip2_init_board( int boardnum ) |
802 | { | |
803 | int i; | |
804 | int nports = 0, nboxes = 0; | |
805 | i2ChanStrPtr pCh; | |
806 | i2eBordStrPtr pB = i2BoardPtrTable[boardnum]; | |
807 | ||
808 | if ( !iiInitialize ( pB ) ) { | |
809 | printk ( KERN_ERR "IP2: Failed to initialize board at 0x%x, error %d\n", | |
810 | pB->i2eBase, pB->i2eError ); | |
811 | goto err_initialize; | |
812 | } | |
813 | printk(KERN_INFO "IP2: Board %d: addr=0x%x irq=%d\n", boardnum + 1, | |
814 | ip2config.addr[boardnum], ip2config.irq[boardnum] ); | |
815 | ||
816 | if (!request_region( ip2config.addr[boardnum], 8, pcName )) { | |
817 | printk(KERN_ERR "IP2: bad addr=0x%x\n", ip2config.addr[boardnum]); | |
818 | goto err_initialize; | |
819 | } | |
820 | ||
821 | if ( iiDownloadAll ( pB, (loadHdrStrPtr)Fip_firmware, 1, Fip_firmware_size ) | |
822 | != II_DOWN_GOOD ) { | |
823 | printk ( KERN_ERR "IP2: failed to download loadware\n" ); | |
824 | goto err_release_region; | |
825 | } else { | |
826 | printk ( KERN_INFO "IP2: fv=%d.%d.%d lv=%d.%d.%d\n", | |
827 | pB->i2ePom.e.porVersion, | |
828 | pB->i2ePom.e.porRevision, | |
829 | pB->i2ePom.e.porSubRev, pB->i2eLVersion, | |
830 | pB->i2eLRevision, pB->i2eLSub ); | |
831 | } | |
832 | ||
833 | switch ( pB->i2ePom.e.porID & ~POR_ID_RESERVED ) { | |
834 | ||
835 | default: | |
836 | printk( KERN_ERR "IP2: Unknown board type, ID = %x\n", | |
837 | pB->i2ePom.e.porID ); | |
838 | nports = 0; | |
839 | goto err_release_region; | |
840 | break; | |
841 | ||
842 | case POR_ID_II_4: /* IntelliPort-II, ISA-4 (4xRJ45) */ | |
843 | printk ( KERN_INFO "IP2: ISA-4\n" ); | |
844 | nports = 4; | |
845 | break; | |
846 | ||
847 | case POR_ID_II_8: /* IntelliPort-II, 8-port using standard brick. */ | |
848 | printk ( KERN_INFO "IP2: ISA-8 std\n" ); | |
849 | nports = 8; | |
850 | break; | |
851 | ||
852 | case POR_ID_II_8R: /* IntelliPort-II, 8-port using RJ11's (no CTS) */ | |
853 | printk ( KERN_INFO "IP2: ISA-8 RJ11\n" ); | |
854 | nports = 8; | |
855 | break; | |
856 | ||
857 | case POR_ID_FIIEX: /* IntelliPort IIEX */ | |
858 | { | |
859 | int portnum = IP2_PORTS_PER_BOARD * boardnum; | |
860 | int box; | |
861 | ||
862 | for( box = 0; box < ABS_MAX_BOXES; ++box ) { | |
863 | if ( pB->i2eChannelMap[box] != 0 ) { | |
864 | ++nboxes; | |
865 | } | |
866 | for( i = 0; i < ABS_BIGGEST_BOX; ++i ) { | |
867 | if ( pB->i2eChannelMap[box] & 1<< i ) { | |
868 | ++nports; | |
869 | } | |
870 | } | |
871 | } | |
872 | DevTableMem[boardnum] = pCh = | |
873 | kmalloc( sizeof(i2ChanStr) * nports, GFP_KERNEL ); | |
874 | if ( !pCh ) { | |
875 | printk ( KERN_ERR "IP2: (i2_init_channel:) Out of memory.\n"); | |
876 | goto err_release_region; | |
877 | } | |
878 | if ( !i2InitChannels( pB, nports, pCh ) ) { | |
879 | printk(KERN_ERR "IP2: i2InitChannels failed: %d\n",pB->i2eError); | |
880 | kfree ( pCh ); | |
881 | goto err_release_region; | |
882 | } | |
883 | pB->i2eChannelPtr = &DevTable[portnum]; | |
884 | pB->i2eChannelCnt = ABS_MOST_PORTS; | |
885 | ||
886 | for( box = 0; box < ABS_MAX_BOXES; ++box, portnum += ABS_BIGGEST_BOX ) { | |
887 | for( i = 0; i < ABS_BIGGEST_BOX; ++i ) { | |
888 | if ( pB->i2eChannelMap[box] & (1 << i) ) { | |
889 | DevTable[portnum + i] = pCh; | |
890 | pCh->port_index = portnum + i; | |
891 | pCh++; | |
892 | } | |
893 | } | |
894 | } | |
895 | printk(KERN_INFO "IP2: EX box=%d ports=%d %d bit\n", | |
896 | nboxes, nports, pB->i2eDataWidth16 ? 16 : 8 ); | |
897 | } | |
898 | goto ex_exit; | |
899 | } | |
900 | DevTableMem[boardnum] = pCh = | |
901 | kmalloc ( sizeof (i2ChanStr) * nports, GFP_KERNEL ); | |
902 | if ( !pCh ) { | |
903 | printk ( KERN_ERR "IP2: (i2_init_channel:) Out of memory.\n"); | |
904 | goto err_release_region; | |
905 | } | |
906 | pB->i2eChannelPtr = pCh; | |
907 | pB->i2eChannelCnt = nports; | |
908 | if ( !i2InitChannels( pB, nports, pCh ) ) { | |
909 | printk(KERN_ERR "IP2: i2InitChannels failed: %d\n",pB->i2eError); | |
910 | kfree ( pCh ); | |
911 | goto err_release_region; | |
912 | } | |
913 | pB->i2eChannelPtr = &DevTable[IP2_PORTS_PER_BOARD * boardnum]; | |
914 | ||
915 | for( i = 0; i < pB->i2eChannelCnt; ++i ) { | |
916 | DevTable[IP2_PORTS_PER_BOARD * boardnum + i] = pCh; | |
917 | pCh->port_index = (IP2_PORTS_PER_BOARD * boardnum) + i; | |
918 | pCh++; | |
919 | } | |
920 | ex_exit: | |
c4028958 | 921 | INIT_WORK(&pB->tqueue_interrupt, ip2_interrupt_bh); |
1da177e4 LT |
922 | return; |
923 | ||
924 | err_release_region: | |
925 | release_region(ip2config.addr[boardnum], 8); | |
926 | err_initialize: | |
927 | kfree ( pB ); | |
928 | i2BoardPtrTable[boardnum] = NULL; | |
929 | return; | |
930 | } | |
931 | ||
932 | /******************************************************************************/ | |
933 | /* Function: find_eisa_board ( int start_slot ) */ | |
934 | /* Parameters: First slot to check */ | |
935 | /* Returns: Address of EISA IntelliPort II controller */ | |
936 | /* */ | |
937 | /* Description: */ | |
938 | /* This function searches for an EISA IntelliPort controller, starting */ | |
939 | /* from the specified slot number. If the motherboard is not identified as an */ | |
940 | /* EISA motherboard, or no valid board ID is selected it returns 0. Otherwise */ | |
941 | /* it returns the base address of the controller. */ | |
942 | /******************************************************************************/ | |
673e321c | 943 | static unsigned short |
1da177e4 LT |
944 | find_eisa_board( int start_slot ) |
945 | { | |
946 | int i, j; | |
947 | unsigned int idm = 0; | |
948 | unsigned int idp = 0; | |
949 | unsigned int base = 0; | |
950 | unsigned int value; | |
951 | int setup_address; | |
952 | int setup_irq; | |
953 | int ismine = 0; | |
954 | ||
955 | /* | |
956 | * First a check for an EISA motherboard, which we do by comparing the | |
957 | * EISA ID registers for the system board and the first couple of slots. | |
958 | * No slot ID should match the system board ID, but on an ISA or PCI | |
959 | * machine the odds are that an empty bus will return similar values for | |
960 | * each slot. | |
961 | */ | |
962 | i = 0x0c80; | |
963 | value = (inb(i) << 24) + (inb(i+1) << 16) + (inb(i+2) << 8) + inb(i+3); | |
964 | for( i = 0x1c80; i <= 0x4c80; i += 0x1000 ) { | |
965 | j = (inb(i)<<24)+(inb(i+1)<<16)+(inb(i+2)<<8)+inb(i+3); | |
966 | if ( value == j ) | |
967 | return 0; | |
968 | } | |
969 | ||
970 | /* | |
971 | * OK, so we are inclined to believe that this is an EISA machine. Find | |
972 | * an IntelliPort controller. | |
973 | */ | |
974 | for( i = start_slot; i < 16; i++ ) { | |
975 | base = i << 12; | |
976 | idm = (inb(base + 0xc80) << 8) | (inb(base + 0xc81) & 0xff); | |
977 | idp = (inb(base + 0xc82) << 8) | (inb(base + 0xc83) & 0xff); | |
978 | ismine = 0; | |
979 | if ( idm == 0x0e8e ) { | |
980 | if ( idp == 0x0281 || idp == 0x0218 ) { | |
981 | ismine = 1; | |
982 | } else if ( idp == 0x0282 || idp == 0x0283 ) { | |
983 | ismine = 3; /* Can do edge-trigger */ | |
984 | } | |
985 | if ( ismine ) { | |
986 | Eisa_slot = i; | |
987 | break; | |
988 | } | |
989 | } | |
990 | } | |
991 | if ( !ismine ) | |
992 | return 0; | |
993 | ||
994 | /* It's some sort of EISA card, but at what address is it configured? */ | |
995 | ||
996 | setup_address = base + 0xc88; | |
997 | value = inb(base + 0xc86); | |
998 | setup_irq = (value & 8) ? Valid_Irqs[value & 7] : 0; | |
999 | ||
1000 | if ( (ismine & 2) && !(value & 0x10) ) { | |
1001 | ismine = 1; /* Could be edging, but not */ | |
1002 | } | |
1003 | ||
1004 | if ( Eisa_irq == 0 ) { | |
1005 | Eisa_irq = setup_irq; | |
1006 | } else if ( Eisa_irq != setup_irq ) { | |
1007 | printk ( KERN_ERR "IP2: EISA irq mismatch between EISA controllers\n" ); | |
1008 | } | |
1009 | ||
1010 | #ifdef IP2DEBUG_INIT | |
1011 | printk(KERN_DEBUG "Computone EISA board in slot %d, I.D. 0x%x%x, Address 0x%x", | |
1012 | base >> 12, idm, idp, setup_address); | |
1013 | if ( Eisa_irq ) { | |
1014 | printk(KERN_DEBUG ", Interrupt %d %s\n", | |
1015 | setup_irq, (ismine & 2) ? "(edge)" : "(level)"); | |
1016 | } else { | |
1017 | printk(KERN_DEBUG ", (polled)\n"); | |
1018 | } | |
1019 | #endif | |
1020 | return setup_address; | |
1021 | } | |
1022 | ||
1023 | /******************************************************************************/ | |
1024 | /* Function: set_irq() */ | |
1025 | /* Parameters: index to board in board table */ | |
1026 | /* IRQ to use */ | |
1027 | /* Returns: Success (0) */ | |
1028 | /* */ | |
1029 | /* Description: */ | |
1030 | /******************************************************************************/ | |
1031 | static void | |
1032 | set_irq( int boardnum, int boardIrq ) | |
1033 | { | |
1034 | unsigned char tempCommand[16]; | |
1035 | i2eBordStrPtr pB = i2BoardPtrTable[boardnum]; | |
1036 | unsigned long flags; | |
1037 | ||
1038 | /* | |
1039 | * Notify the boards they may generate interrupts. This is done by | |
1040 | * sending an in-line command to channel 0 on each board. This is why | |
1041 | * the channels have to be defined already. For each board, if the | |
1042 | * interrupt has never been defined, we must do so NOW, directly, since | |
1043 | * board will not send flow control or even give an interrupt until this | |
1044 | * is done. If polling we must send 0 as the interrupt parameter. | |
1045 | */ | |
1046 | ||
1047 | // We will get an interrupt here at the end of this function | |
1048 | ||
1049 | iiDisableMailIrq(pB); | |
1050 | ||
1051 | /* We build up the entire packet header. */ | |
1052 | CHANNEL_OF(tempCommand) = 0; | |
1053 | PTYPE_OF(tempCommand) = PTYPE_INLINE; | |
1054 | CMD_COUNT_OF(tempCommand) = 2; | |
1055 | (CMD_OF(tempCommand))[0] = CMDVALUE_IRQ; | |
1056 | (CMD_OF(tempCommand))[1] = boardIrq; | |
1057 | /* | |
1058 | * Write to FIFO; don't bother to adjust fifo capacity for this, since | |
1059 | * board will respond almost immediately after SendMail hit. | |
1060 | */ | |
1061 | WRITE_LOCK_IRQSAVE(&pB->write_fifo_spinlock,flags); | |
1062 | iiWriteBuf(pB, tempCommand, 4); | |
1063 | WRITE_UNLOCK_IRQRESTORE(&pB->write_fifo_spinlock,flags); | |
1064 | pB->i2eUsingIrq = boardIrq; | |
1065 | pB->i2eOutMailWaiting |= MB_OUT_STUFFED; | |
1066 | ||
1067 | /* Need to update number of boards before you enable mailbox int */ | |
1068 | ++i2nBoards; | |
1069 | ||
1070 | CHANNEL_OF(tempCommand) = 0; | |
1071 | PTYPE_OF(tempCommand) = PTYPE_BYPASS; | |
1072 | CMD_COUNT_OF(tempCommand) = 6; | |
1073 | (CMD_OF(tempCommand))[0] = 88; // SILO | |
1074 | (CMD_OF(tempCommand))[1] = 64; // chars | |
1075 | (CMD_OF(tempCommand))[2] = 32; // ms | |
1076 | ||
1077 | (CMD_OF(tempCommand))[3] = 28; // MAX_BLOCK | |
1078 | (CMD_OF(tempCommand))[4] = 64; // chars | |
1079 | ||
1080 | (CMD_OF(tempCommand))[5] = 87; // HW_TEST | |
1081 | WRITE_LOCK_IRQSAVE(&pB->write_fifo_spinlock,flags); | |
1082 | iiWriteBuf(pB, tempCommand, 8); | |
1083 | WRITE_UNLOCK_IRQRESTORE(&pB->write_fifo_spinlock,flags); | |
1084 | ||
1085 | CHANNEL_OF(tempCommand) = 0; | |
1086 | PTYPE_OF(tempCommand) = PTYPE_BYPASS; | |
1087 | CMD_COUNT_OF(tempCommand) = 1; | |
1088 | (CMD_OF(tempCommand))[0] = 84; /* get BOX_IDS */ | |
1089 | iiWriteBuf(pB, tempCommand, 3); | |
1090 | ||
1091 | #ifdef XXX | |
1092 | // enable heartbeat for test porpoises | |
1093 | CHANNEL_OF(tempCommand) = 0; | |
1094 | PTYPE_OF(tempCommand) = PTYPE_BYPASS; | |
1095 | CMD_COUNT_OF(tempCommand) = 2; | |
1096 | (CMD_OF(tempCommand))[0] = 44; /* get ping */ | |
1097 | (CMD_OF(tempCommand))[1] = 200; /* 200 ms */ | |
1098 | WRITE_LOCK_IRQSAVE(&pB->write_fifo_spinlock,flags); | |
1099 | iiWriteBuf(pB, tempCommand, 4); | |
1100 | WRITE_UNLOCK_IRQRESTORE(&pB->write_fifo_spinlock,flags); | |
1101 | #endif | |
1102 | ||
1103 | iiEnableMailIrq(pB); | |
1104 | iiSendPendingMail(pB); | |
1105 | } | |
1106 | ||
1107 | /******************************************************************************/ | |
1108 | /* Interrupt Handler Section */ | |
1109 | /******************************************************************************/ | |
1110 | ||
1111 | static inline void | |
1112 | service_all_boards(void) | |
1113 | { | |
1114 | int i; | |
1115 | i2eBordStrPtr pB; | |
1116 | ||
1117 | /* Service every board on the list */ | |
1118 | for( i = 0; i < IP2_MAX_BOARDS; ++i ) { | |
1119 | pB = i2BoardPtrTable[i]; | |
1120 | if ( pB ) { | |
1121 | i2ServiceBoard( pB ); | |
1122 | } | |
1123 | } | |
1124 | } | |
1125 | ||
1126 | ||
1127 | /******************************************************************************/ | |
c4028958 DH |
1128 | /* Function: ip2_interrupt_bh(work) */ |
1129 | /* Parameters: work - pointer to the board structure */ | |
1da177e4 LT |
1130 | /* Returns: Nothing */ |
1131 | /* */ | |
1132 | /* Description: */ | |
1133 | /* Service the board in a bottom half interrupt handler and then */ | |
1134 | /* reenable the board's interrupts if it has an IRQ number */ | |
1135 | /* */ | |
1136 | /******************************************************************************/ | |
1137 | static void | |
c4028958 | 1138 | ip2_interrupt_bh(struct work_struct *work) |
1da177e4 | 1139 | { |
c4028958 | 1140 | i2eBordStrPtr pB = container_of(work, i2eBordStr, tqueue_interrupt); |
1da177e4 LT |
1141 | // pB better well be set or we have a problem! We can only get |
1142 | // here from the IMMEDIATE queue. Here, we process the boards. | |
1143 | // Checking pB doesn't cost much and it saves us from the sanity checkers. | |
1144 | ||
1145 | bh_counter++; | |
1146 | ||
1147 | if ( pB ) { | |
1148 | i2ServiceBoard( pB ); | |
1149 | if( pB->i2eUsingIrq ) { | |
1150 | // Re-enable his interrupts | |
1151 | iiEnableMailIrq(pB); | |
1152 | } | |
1153 | } | |
1154 | } | |
1155 | ||
1156 | ||
1157 | /******************************************************************************/ | |
7d12e780 | 1158 | /* Function: ip2_interrupt(int irq, void *dev_id) */ |
1da177e4 LT |
1159 | /* Parameters: irq - interrupt number */ |
1160 | /* pointer to optional device ID structure */ | |
1da177e4 LT |
1161 | /* Returns: Nothing */ |
1162 | /* */ | |
1163 | /* Description: */ | |
1164 | /* */ | |
1165 | /* Our task here is simply to identify each board which needs servicing. */ | |
1166 | /* If we are queuing then, queue it to be serviced, and disable its irq */ | |
1167 | /* mask otherwise process the board directly. */ | |
1168 | /* */ | |
1169 | /* We could queue by IRQ but that just complicates things on both ends */ | |
1170 | /* with very little gain in performance (how many instructions does */ | |
1171 | /* it take to iterate on the immediate queue). */ | |
1172 | /* */ | |
1173 | /* */ | |
1174 | /******************************************************************************/ | |
1175 | static irqreturn_t | |
7d12e780 | 1176 | ip2_interrupt(int irq, void *dev_id) |
1da177e4 LT |
1177 | { |
1178 | int i; | |
1179 | i2eBordStrPtr pB; | |
1180 | int handled = 0; | |
1181 | ||
1182 | ip2trace (ITRC_NO_PORT, ITRC_INTR, 99, 1, irq ); | |
1183 | ||
1184 | /* Service just the boards on the list using this irq */ | |
1185 | for( i = 0; i < i2nBoards; ++i ) { | |
1186 | pB = i2BoardPtrTable[i]; | |
1187 | ||
1188 | // Only process those boards which match our IRQ. | |
1189 | // IRQ = 0 for polled boards, we won't poll "IRQ" boards | |
1190 | ||
1191 | if ( pB && (pB->i2eUsingIrq == irq) ) { | |
1192 | handled = 1; | |
1193 | #ifdef USE_IQI | |
1194 | ||
1195 | if (NO_MAIL_HERE != ( pB->i2eStartMail = iiGetMail(pB))) { | |
1196 | // Disable his interrupt (will be enabled when serviced) | |
1197 | // This is mostly to protect from reentrancy. | |
1198 | iiDisableMailIrq(pB); | |
1199 | ||
1200 | // Park the board on the immediate queue for processing. | |
1201 | schedule_work(&pB->tqueue_interrupt); | |
1202 | ||
1203 | // Make sure the immediate queue is flagged to fire. | |
1204 | } | |
1205 | #else | |
1206 | // We are using immediate servicing here. This sucks and can | |
1207 | // cause all sorts of havoc with ppp and others. The failsafe | |
1208 | // check on iiSendPendingMail could also throw a hairball. | |
1209 | i2ServiceBoard( pB ); | |
1210 | #endif /* USE_IQI */ | |
1211 | } | |
1212 | } | |
1213 | ||
1214 | ++irq_counter; | |
1215 | ||
1216 | ip2trace (ITRC_NO_PORT, ITRC_INTR, ITRC_RETURN, 0 ); | |
1217 | return IRQ_RETVAL(handled); | |
1218 | } | |
1219 | ||
1220 | /******************************************************************************/ | |
1221 | /* Function: ip2_poll(unsigned long arg) */ | |
1222 | /* Parameters: ? */ | |
1223 | /* Returns: Nothing */ | |
1224 | /* */ | |
1225 | /* Description: */ | |
1226 | /* This function calls the library routine i2ServiceBoard for each board in */ | |
1227 | /* the board table. This is used instead of the interrupt routine when polled */ | |
1228 | /* mode is specified. */ | |
1229 | /******************************************************************************/ | |
1230 | static void | |
1231 | ip2_poll(unsigned long arg) | |
1232 | { | |
1233 | ip2trace (ITRC_NO_PORT, ITRC_INTR, 100, 0 ); | |
1234 | ||
1235 | TimerOn = 0; // it's the truth but not checked in service | |
1236 | ||
1237 | // Just polled boards, IRQ = 0 will hit all non-interrupt boards. | |
1238 | // It will NOT poll boards handled by hard interrupts. | |
1239 | // The issue of queued BH interrups is handled in ip2_interrupt(). | |
7d12e780 | 1240 | ip2_interrupt(0, NULL); |
1da177e4 LT |
1241 | |
1242 | PollTimer.expires = POLL_TIMEOUT; | |
1243 | add_timer( &PollTimer ); | |
1244 | TimerOn = 1; | |
1245 | ||
1246 | ip2trace (ITRC_NO_PORT, ITRC_INTR, ITRC_RETURN, 0 ); | |
1247 | } | |
1248 | ||
c4028958 | 1249 | static void do_input(struct work_struct *work) |
1da177e4 | 1250 | { |
c4028958 | 1251 | i2ChanStrPtr pCh = container_of(work, i2ChanStr, tqueue_input); |
1da177e4 LT |
1252 | unsigned long flags; |
1253 | ||
1254 | ip2trace(CHANN, ITRC_INPUT, 21, 0 ); | |
1255 | ||
1256 | // Data input | |
1257 | if ( pCh->pTTY != NULL ) { | |
1258 | READ_LOCK_IRQSAVE(&pCh->Ibuf_spinlock,flags) | |
1259 | if (!pCh->throttled && (pCh->Ibuf_stuff != pCh->Ibuf_strip)) { | |
1260 | READ_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags) | |
1261 | i2Input( pCh ); | |
1262 | } else | |
1263 | READ_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags) | |
1264 | } else { | |
1265 | ip2trace(CHANN, ITRC_INPUT, 22, 0 ); | |
1266 | ||
1267 | i2InputFlush( pCh ); | |
1268 | } | |
1269 | } | |
1270 | ||
1271 | // code duplicated from n_tty (ldisc) | |
1272 | static inline void isig(int sig, struct tty_struct *tty, int flush) | |
1273 | { | |
1274 | if (tty->pgrp > 0) | |
1275 | kill_pg(tty->pgrp, sig, 1); | |
1276 | if (flush || !L_NOFLSH(tty)) { | |
1277 | if ( tty->ldisc.flush_buffer ) | |
1278 | tty->ldisc.flush_buffer(tty); | |
1279 | i2InputFlush( tty->driver_data ); | |
1280 | } | |
1281 | } | |
1282 | ||
c4028958 | 1283 | static void do_status(struct work_struct *work) |
1da177e4 | 1284 | { |
c4028958 | 1285 | i2ChanStrPtr pCh = container_of(work, i2ChanStr, tqueue_status); |
1da177e4 LT |
1286 | int status; |
1287 | ||
1288 | status = i2GetStatus( pCh, (I2_BRK|I2_PAR|I2_FRA|I2_OVR) ); | |
1289 | ||
1290 | ip2trace (CHANN, ITRC_STATUS, 21, 1, status ); | |
1291 | ||
1292 | if (pCh->pTTY && (status & (I2_BRK|I2_PAR|I2_FRA|I2_OVR)) ) { | |
1293 | if ( (status & I2_BRK) ) { | |
1294 | // code duplicated from n_tty (ldisc) | |
1295 | if (I_IGNBRK(pCh->pTTY)) | |
1296 | goto skip_this; | |
1297 | if (I_BRKINT(pCh->pTTY)) { | |
1298 | isig(SIGINT, pCh->pTTY, 1); | |
1299 | goto skip_this; | |
1300 | } | |
1301 | wake_up_interruptible(&pCh->pTTY->read_wait); | |
1302 | } | |
1303 | #ifdef NEVER_HAPPENS_AS_SETUP_XXX | |
1304 | // and can't work because we don't know the_char | |
1305 | // as the_char is reported on a separate path | |
1306 | // The intelligent board does this stuff as setup | |
1307 | { | |
1308 | char brkf = TTY_NORMAL; | |
1309 | unsigned char brkc = '\0'; | |
1310 | unsigned char tmp; | |
1311 | if ( (status & I2_BRK) ) { | |
1312 | brkf = TTY_BREAK; | |
1313 | brkc = '\0'; | |
1314 | } | |
1315 | else if (status & I2_PAR) { | |
1316 | brkf = TTY_PARITY; | |
1317 | brkc = the_char; | |
1318 | } else if (status & I2_FRA) { | |
1319 | brkf = TTY_FRAME; | |
1320 | brkc = the_char; | |
1321 | } else if (status & I2_OVR) { | |
1322 | brkf = TTY_OVERRUN; | |
1323 | brkc = the_char; | |
1324 | } | |
1325 | tmp = pCh->pTTY->real_raw; | |
1326 | pCh->pTTY->real_raw = 0; | |
1327 | pCh->pTTY->ldisc.receive_buf( pCh->pTTY, &brkc, &brkf, 1 ); | |
1328 | pCh->pTTY->real_raw = tmp; | |
1329 | } | |
1330 | #endif /* NEVER_HAPPENS_AS_SETUP_XXX */ | |
1331 | } | |
1332 | skip_this: | |
1333 | ||
1334 | if ( status & (I2_DDCD | I2_DDSR | I2_DCTS | I2_DRI) ) { | |
1335 | wake_up_interruptible(&pCh->delta_msr_wait); | |
1336 | ||
1337 | if ( (pCh->flags & ASYNC_CHECK_CD) && (status & I2_DDCD) ) { | |
1338 | if ( status & I2_DCD ) { | |
1339 | if ( pCh->wopen ) { | |
1340 | wake_up_interruptible ( &pCh->open_wait ); | |
1341 | } | |
1342 | } else { | |
1343 | if (pCh->pTTY && (!(pCh->pTTY->termios->c_cflag & CLOCAL)) ) { | |
1344 | tty_hangup( pCh->pTTY ); | |
1345 | } | |
1346 | } | |
1347 | } | |
1348 | } | |
1349 | ||
1350 | ip2trace (CHANN, ITRC_STATUS, 26, 0 ); | |
1351 | } | |
1352 | ||
1353 | /******************************************************************************/ | |
1354 | /* Device Open/Close/Ioctl Entry Point Section */ | |
1355 | /******************************************************************************/ | |
1356 | ||
1357 | /******************************************************************************/ | |
1358 | /* Function: open_sanity_check() */ | |
1359 | /* Parameters: Pointer to tty structure */ | |
1360 | /* Pointer to file structure */ | |
1361 | /* Returns: Success or failure */ | |
1362 | /* */ | |
1363 | /* Description: */ | |
1364 | /* Verifies the structure magic numbers and cross links. */ | |
1365 | /******************************************************************************/ | |
1366 | #ifdef IP2DEBUG_OPEN | |
1367 | static void | |
1368 | open_sanity_check( i2ChanStrPtr pCh, i2eBordStrPtr pBrd ) | |
1369 | { | |
1370 | if ( pBrd->i2eValid != I2E_MAGIC ) { | |
1371 | printk(KERN_ERR "IP2: invalid board structure\n" ); | |
1372 | } else if ( pBrd != pCh->pMyBord ) { | |
1373 | printk(KERN_ERR "IP2: board structure pointer mismatch (%p)\n", | |
1374 | pCh->pMyBord ); | |
1375 | } else if ( pBrd->i2eChannelCnt < pCh->port_index ) { | |
1376 | printk(KERN_ERR "IP2: bad device index (%d)\n", pCh->port_index ); | |
1377 | } else if (&((i2ChanStrPtr)pBrd->i2eChannelPtr)[pCh->port_index] != pCh) { | |
1378 | } else { | |
1379 | printk(KERN_INFO "IP2: all pointers check out!\n" ); | |
1380 | } | |
1381 | } | |
1382 | #endif | |
1383 | ||
1384 | ||
1385 | /******************************************************************************/ | |
1386 | /* Function: ip2_open() */ | |
1387 | /* Parameters: Pointer to tty structure */ | |
1388 | /* Pointer to file structure */ | |
1389 | /* Returns: Success or failure */ | |
1390 | /* */ | |
1391 | /* Description: (MANDATORY) */ | |
1392 | /* A successful device open has to run a gauntlet of checks before it */ | |
1393 | /* completes. After some sanity checking and pointer setup, the function */ | |
1394 | /* blocks until all conditions are satisfied. It then initialises the port to */ | |
1395 | /* the default characteristics and returns. */ | |
1396 | /******************************************************************************/ | |
1397 | static int | |
1398 | ip2_open( PTTY tty, struct file *pFile ) | |
1399 | { | |
1400 | wait_queue_t wait; | |
1401 | int rc = 0; | |
1402 | int do_clocal = 0; | |
1403 | i2ChanStrPtr pCh = DevTable[tty->index]; | |
1404 | ||
1405 | ip2trace (tty->index, ITRC_OPEN, ITRC_ENTER, 0 ); | |
1406 | ||
1407 | if ( pCh == NULL ) { | |
1408 | return -ENODEV; | |
1409 | } | |
1410 | /* Setup pointer links in device and tty structures */ | |
1411 | pCh->pTTY = tty; | |
1412 | tty->driver_data = pCh; | |
1413 | ||
1414 | #ifdef IP2DEBUG_OPEN | |
1415 | printk(KERN_DEBUG \ | |
1416 | "IP2:open(tty=%p,pFile=%p):dev=%s,ch=%d,idx=%d\n", | |
1417 | tty, pFile, tty->name, pCh->infl.hd.i2sChannel, pCh->port_index); | |
1418 | open_sanity_check ( pCh, pCh->pMyBord ); | |
1419 | #endif | |
1420 | ||
1421 | i2QueueCommands(PTYPE_INLINE, pCh, 100, 3, CMD_DTRUP,CMD_RTSUP,CMD_DCD_REP); | |
1422 | pCh->dataSetOut |= (I2_DTR | I2_RTS); | |
1423 | serviceOutgoingFifo( pCh->pMyBord ); | |
1424 | ||
1425 | /* Block here until the port is ready (per serial and istallion) */ | |
1426 | /* | |
1427 | * 1. If the port is in the middle of closing wait for the completion | |
1428 | * and then return the appropriate error. | |
1429 | */ | |
1430 | init_waitqueue_entry(&wait, current); | |
1431 | add_wait_queue(&pCh->close_wait, &wait); | |
1432 | set_current_state( TASK_INTERRUPTIBLE ); | |
1433 | ||
1434 | if ( tty_hung_up_p(pFile) || ( pCh->flags & ASYNC_CLOSING )) { | |
1435 | if ( pCh->flags & ASYNC_CLOSING ) { | |
1436 | schedule(); | |
1437 | } | |
1438 | if ( tty_hung_up_p(pFile) ) { | |
1439 | set_current_state( TASK_RUNNING ); | |
1440 | remove_wait_queue(&pCh->close_wait, &wait); | |
1441 | return( pCh->flags & ASYNC_HUP_NOTIFY ) ? -EAGAIN : -ERESTARTSYS; | |
1442 | } | |
1443 | } | |
1444 | set_current_state( TASK_RUNNING ); | |
1445 | remove_wait_queue(&pCh->close_wait, &wait); | |
1446 | ||
1447 | /* | |
1448 | * 3. Handle a non-blocking open of a normal port. | |
1449 | */ | |
1450 | if ( (pFile->f_flags & O_NONBLOCK) || (tty->flags & (1<<TTY_IO_ERROR) )) { | |
1451 | pCh->flags |= ASYNC_NORMAL_ACTIVE; | |
1452 | goto noblock; | |
1453 | } | |
1454 | /* | |
1455 | * 4. Now loop waiting for the port to be free and carrier present | |
1456 | * (if required). | |
1457 | */ | |
1458 | if ( tty->termios->c_cflag & CLOCAL ) | |
1459 | do_clocal = 1; | |
1460 | ||
1461 | #ifdef IP2DEBUG_OPEN | |
1462 | printk(KERN_DEBUG "OpenBlock: do_clocal = %d\n", do_clocal); | |
1463 | #endif | |
1464 | ||
1465 | ++pCh->wopen; | |
1466 | ||
1467 | init_waitqueue_entry(&wait, current); | |
1468 | add_wait_queue(&pCh->open_wait, &wait); | |
1469 | ||
1470 | for(;;) { | |
1471 | i2QueueCommands(PTYPE_INLINE, pCh, 100, 2, CMD_DTRUP, CMD_RTSUP); | |
1472 | pCh->dataSetOut |= (I2_DTR | I2_RTS); | |
1473 | set_current_state( TASK_INTERRUPTIBLE ); | |
1474 | serviceOutgoingFifo( pCh->pMyBord ); | |
1475 | if ( tty_hung_up_p(pFile) ) { | |
1476 | set_current_state( TASK_RUNNING ); | |
1477 | remove_wait_queue(&pCh->open_wait, &wait); | |
1478 | return ( pCh->flags & ASYNC_HUP_NOTIFY ) ? -EBUSY : -ERESTARTSYS; | |
1479 | } | |
1480 | if (!(pCh->flags & ASYNC_CLOSING) && | |
1481 | (do_clocal || (pCh->dataSetIn & I2_DCD) )) { | |
1482 | rc = 0; | |
1483 | break; | |
1484 | } | |
1485 | ||
1486 | #ifdef IP2DEBUG_OPEN | |
1487 | printk(KERN_DEBUG "ASYNC_CLOSING = %s\n", | |
1488 | (pCh->flags & ASYNC_CLOSING)?"True":"False"); | |
1489 | printk(KERN_DEBUG "OpenBlock: waiting for CD or signal\n"); | |
1490 | #endif | |
1491 | ip2trace (CHANN, ITRC_OPEN, 3, 2, 0, | |
1492 | (pCh->flags & ASYNC_CLOSING) ); | |
1493 | /* check for signal */ | |
1494 | if (signal_pending(current)) { | |
1495 | rc = (( pCh->flags & ASYNC_HUP_NOTIFY ) ? -EAGAIN : -ERESTARTSYS); | |
1496 | break; | |
1497 | } | |
1498 | schedule(); | |
1499 | } | |
1500 | set_current_state( TASK_RUNNING ); | |
1501 | remove_wait_queue(&pCh->open_wait, &wait); | |
1502 | ||
1503 | --pCh->wopen; //why count? | |
1504 | ||
1505 | ip2trace (CHANN, ITRC_OPEN, 4, 0 ); | |
1506 | ||
1507 | if (rc != 0 ) { | |
1508 | return rc; | |
1509 | } | |
1510 | pCh->flags |= ASYNC_NORMAL_ACTIVE; | |
1511 | ||
1512 | noblock: | |
1513 | ||
1514 | /* first open - Assign termios structure to port */ | |
1515 | if ( tty->count == 1 ) { | |
1516 | i2QueueCommands(PTYPE_INLINE, pCh, 0, 2, CMD_CTSFL_DSAB, CMD_RTSFL_DSAB); | |
1517 | /* Now we must send the termios settings to the loadware */ | |
1518 | set_params( pCh, NULL ); | |
1519 | } | |
1520 | ||
1521 | /* | |
1522 | * Now set any i2lib options. These may go away if the i2lib code ends | |
1523 | * up rolled into the mainline. | |
1524 | */ | |
1525 | pCh->channelOptions |= CO_NBLOCK_WRITE; | |
1526 | ||
1527 | #ifdef IP2DEBUG_OPEN | |
1528 | printk (KERN_DEBUG "IP2: open completed\n" ); | |
1529 | #endif | |
1530 | serviceOutgoingFifo( pCh->pMyBord ); | |
1531 | ||
1532 | ip2trace (CHANN, ITRC_OPEN, ITRC_RETURN, 0 ); | |
1533 | ||
1534 | return 0; | |
1535 | } | |
1536 | ||
1537 | /******************************************************************************/ | |
1538 | /* Function: ip2_close() */ | |
1539 | /* Parameters: Pointer to tty structure */ | |
1540 | /* Pointer to file structure */ | |
1541 | /* Returns: Nothing */ | |
1542 | /* */ | |
1543 | /* Description: */ | |
1544 | /* */ | |
1545 | /* */ | |
1546 | /******************************************************************************/ | |
1547 | static void | |
1548 | ip2_close( PTTY tty, struct file *pFile ) | |
1549 | { | |
1550 | i2ChanStrPtr pCh = tty->driver_data; | |
1551 | ||
1552 | if ( !pCh ) { | |
1553 | return; | |
1554 | } | |
1555 | ||
1556 | ip2trace (CHANN, ITRC_CLOSE, ITRC_ENTER, 0 ); | |
1557 | ||
1558 | #ifdef IP2DEBUG_OPEN | |
1559 | printk(KERN_DEBUG "IP2:close %s:\n",tty->name); | |
1560 | #endif | |
1561 | ||
1562 | if ( tty_hung_up_p ( pFile ) ) { | |
1563 | ||
1564 | ip2trace (CHANN, ITRC_CLOSE, 2, 1, 2 ); | |
1565 | ||
1566 | return; | |
1567 | } | |
1568 | if ( tty->count > 1 ) { /* not the last close */ | |
1569 | ||
1570 | ip2trace (CHANN, ITRC_CLOSE, 2, 1, 3 ); | |
1571 | ||
1572 | return; | |
1573 | } | |
1574 | pCh->flags |= ASYNC_CLOSING; // last close actually | |
1575 | ||
1576 | tty->closing = 1; | |
1577 | ||
1578 | if (pCh->ClosingWaitTime != ASYNC_CLOSING_WAIT_NONE) { | |
1579 | /* | |
1580 | * Before we drop DTR, make sure the transmitter has completely drained. | |
1581 | * This uses an timeout, after which the close | |
1582 | * completes. | |
1583 | */ | |
1584 | ip2_wait_until_sent(tty, pCh->ClosingWaitTime ); | |
1585 | } | |
1586 | /* | |
1587 | * At this point we stop accepting input. Here we flush the channel | |
1588 | * input buffer which will allow the board to send up more data. Any | |
1589 | * additional input is tossed at interrupt/poll time. | |
1590 | */ | |
1591 | i2InputFlush( pCh ); | |
1592 | ||
1593 | /* disable DSS reporting */ | |
1594 | i2QueueCommands(PTYPE_INLINE, pCh, 100, 4, | |
1595 | CMD_DCD_NREP, CMD_CTS_NREP, CMD_DSR_NREP, CMD_RI_NREP); | |
1596 | if ( !tty || (tty->termios->c_cflag & HUPCL) ) { | |
1597 | i2QueueCommands(PTYPE_INLINE, pCh, 100, 2, CMD_RTSDN, CMD_DTRDN); | |
1598 | pCh->dataSetOut &= ~(I2_DTR | I2_RTS); | |
1599 | i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_PAUSE(25)); | |
1600 | } | |
1601 | ||
1602 | serviceOutgoingFifo ( pCh->pMyBord ); | |
1603 | ||
1604 | if ( tty->driver->flush_buffer ) | |
1605 | tty->driver->flush_buffer(tty); | |
1606 | if ( tty->ldisc.flush_buffer ) | |
1607 | tty->ldisc.flush_buffer(tty); | |
1608 | tty->closing = 0; | |
1609 | ||
1610 | pCh->pTTY = NULL; | |
1611 | ||
1612 | if (pCh->wopen) { | |
1613 | if (pCh->ClosingDelay) { | |
1614 | msleep_interruptible(jiffies_to_msecs(pCh->ClosingDelay)); | |
1615 | } | |
1616 | wake_up_interruptible(&pCh->open_wait); | |
1617 | } | |
1618 | ||
1619 | pCh->flags &=~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); | |
1620 | wake_up_interruptible(&pCh->close_wait); | |
1621 | ||
1622 | #ifdef IP2DEBUG_OPEN | |
1623 | DBG_CNT("ip2_close: after wakeups--"); | |
1624 | #endif | |
1625 | ||
1626 | ||
1627 | ip2trace (CHANN, ITRC_CLOSE, ITRC_RETURN, 1, 1 ); | |
1628 | ||
1629 | return; | |
1630 | } | |
1631 | ||
1632 | /******************************************************************************/ | |
1633 | /* Function: ip2_hangup() */ | |
1634 | /* Parameters: Pointer to tty structure */ | |
1635 | /* Returns: Nothing */ | |
1636 | /* */ | |
1637 | /* Description: */ | |
1638 | /* */ | |
1639 | /* */ | |
1640 | /******************************************************************************/ | |
1641 | static void | |
1642 | ip2_hangup ( PTTY tty ) | |
1643 | { | |
1644 | i2ChanStrPtr pCh = tty->driver_data; | |
1645 | ||
1646 | if( !pCh ) { | |
1647 | return; | |
1648 | } | |
1649 | ||
1650 | ip2trace (CHANN, ITRC_HANGUP, ITRC_ENTER, 0 ); | |
1651 | ||
1652 | ip2_flush_buffer(tty); | |
1653 | ||
1654 | /* disable DSS reporting */ | |
1655 | ||
1656 | i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_DCD_NREP); | |
1657 | i2QueueCommands(PTYPE_INLINE, pCh, 0, 2, CMD_CTSFL_DSAB, CMD_RTSFL_DSAB); | |
1658 | if ( (tty->termios->c_cflag & HUPCL) ) { | |
1659 | i2QueueCommands(PTYPE_BYPASS, pCh, 0, 2, CMD_RTSDN, CMD_DTRDN); | |
1660 | pCh->dataSetOut &= ~(I2_DTR | I2_RTS); | |
1661 | i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_PAUSE(25)); | |
1662 | } | |
1663 | i2QueueCommands(PTYPE_INLINE, pCh, 1, 3, | |
1664 | CMD_CTS_NREP, CMD_DSR_NREP, CMD_RI_NREP); | |
1665 | serviceOutgoingFifo ( pCh->pMyBord ); | |
1666 | ||
1667 | wake_up_interruptible ( &pCh->delta_msr_wait ); | |
1668 | ||
1669 | pCh->flags &= ~ASYNC_NORMAL_ACTIVE; | |
1670 | pCh->pTTY = NULL; | |
1671 | wake_up_interruptible ( &pCh->open_wait ); | |
1672 | ||
1673 | ip2trace (CHANN, ITRC_HANGUP, ITRC_RETURN, 0 ); | |
1674 | } | |
1675 | ||
1676 | /******************************************************************************/ | |
1677 | /******************************************************************************/ | |
1678 | /* Device Output Section */ | |
1679 | /******************************************************************************/ | |
1680 | /******************************************************************************/ | |
1681 | ||
1682 | /******************************************************************************/ | |
1683 | /* Function: ip2_write() */ | |
1684 | /* Parameters: Pointer to tty structure */ | |
1685 | /* Flag denoting data is in user (1) or kernel (0) space */ | |
1686 | /* Pointer to data */ | |
1687 | /* Number of bytes to write */ | |
1688 | /* Returns: Number of bytes actually written */ | |
1689 | /* */ | |
1690 | /* Description: (MANDATORY) */ | |
1691 | /* */ | |
1692 | /* */ | |
1693 | /******************************************************************************/ | |
1694 | static int | |
d9e39538 | 1695 | ip2_write( PTTY tty, const unsigned char *pData, int count) |
1da177e4 LT |
1696 | { |
1697 | i2ChanStrPtr pCh = tty->driver_data; | |
1698 | int bytesSent = 0; | |
1699 | unsigned long flags; | |
1700 | ||
1701 | ip2trace (CHANN, ITRC_WRITE, ITRC_ENTER, 2, count, -1 ); | |
1702 | ||
1703 | /* Flush out any buffered data left over from ip2_putchar() calls. */ | |
1704 | ip2_flush_chars( tty ); | |
1705 | ||
1706 | /* This is the actual move bit. Make sure it does what we need!!!!! */ | |
1707 | WRITE_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags); | |
f061c584 | 1708 | bytesSent = i2Output( pCh, pData, count); |
1da177e4 LT |
1709 | WRITE_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags); |
1710 | ||
1711 | ip2trace (CHANN, ITRC_WRITE, ITRC_RETURN, 1, bytesSent ); | |
1712 | ||
1713 | return bytesSent > 0 ? bytesSent : 0; | |
1714 | } | |
1715 | ||
1716 | /******************************************************************************/ | |
1717 | /* Function: ip2_putchar() */ | |
1718 | /* Parameters: Pointer to tty structure */ | |
1719 | /* Character to write */ | |
1720 | /* Returns: Nothing */ | |
1721 | /* */ | |
1722 | /* Description: */ | |
1723 | /* */ | |
1724 | /* */ | |
1725 | /******************************************************************************/ | |
1726 | static void | |
1727 | ip2_putchar( PTTY tty, unsigned char ch ) | |
1728 | { | |
1729 | i2ChanStrPtr pCh = tty->driver_data; | |
1730 | unsigned long flags; | |
1731 | ||
1732 | // ip2trace (CHANN, ITRC_PUTC, ITRC_ENTER, 1, ch ); | |
1733 | ||
1734 | WRITE_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags); | |
1735 | pCh->Pbuf[pCh->Pbuf_stuff++] = ch; | |
1736 | if ( pCh->Pbuf_stuff == sizeof pCh->Pbuf ) { | |
1737 | WRITE_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags); | |
1738 | ip2_flush_chars( tty ); | |
1739 | } else | |
1740 | WRITE_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags); | |
1741 | ||
1742 | // ip2trace (CHANN, ITRC_PUTC, ITRC_RETURN, 1, ch ); | |
1743 | } | |
1744 | ||
1745 | /******************************************************************************/ | |
1746 | /* Function: ip2_flush_chars() */ | |
1747 | /* Parameters: Pointer to tty structure */ | |
1748 | /* Returns: Nothing */ | |
1749 | /* */ | |
1750 | /* Description: */ | |
1751 | /* */ | |
1752 | /******************************************************************************/ | |
1753 | static void | |
1754 | ip2_flush_chars( PTTY tty ) | |
1755 | { | |
1756 | int strip; | |
1757 | i2ChanStrPtr pCh = tty->driver_data; | |
1758 | unsigned long flags; | |
1759 | ||
1760 | WRITE_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags); | |
1761 | if ( pCh->Pbuf_stuff ) { | |
1762 | ||
1763 | // ip2trace (CHANN, ITRC_PUTC, 10, 1, strip ); | |
1764 | ||
1765 | // | |
1766 | // We may need to restart i2Output if it does not fullfill this request | |
1767 | // | |
f061c584 | 1768 | strip = i2Output( pCh, pCh->Pbuf, pCh->Pbuf_stuff); |
1da177e4 LT |
1769 | if ( strip != pCh->Pbuf_stuff ) { |
1770 | memmove( pCh->Pbuf, &pCh->Pbuf[strip], pCh->Pbuf_stuff - strip ); | |
1771 | } | |
1772 | pCh->Pbuf_stuff -= strip; | |
1773 | } | |
1774 | WRITE_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags); | |
1775 | } | |
1776 | ||
1777 | /******************************************************************************/ | |
1778 | /* Function: ip2_write_room() */ | |
1779 | /* Parameters: Pointer to tty structure */ | |
1780 | /* Returns: Number of bytes that the driver can accept */ | |
1781 | /* */ | |
1782 | /* Description: */ | |
1783 | /* */ | |
1784 | /******************************************************************************/ | |
1785 | static int | |
1786 | ip2_write_room ( PTTY tty ) | |
1787 | { | |
1788 | int bytesFree; | |
1789 | i2ChanStrPtr pCh = tty->driver_data; | |
1790 | unsigned long flags; | |
1791 | ||
1792 | READ_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags); | |
1793 | bytesFree = i2OutputFree( pCh ) - pCh->Pbuf_stuff; | |
1794 | READ_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags); | |
1795 | ||
1796 | ip2trace (CHANN, ITRC_WRITE, 11, 1, bytesFree ); | |
1797 | ||
1798 | return ((bytesFree > 0) ? bytesFree : 0); | |
1799 | } | |
1800 | ||
1801 | /******************************************************************************/ | |
1802 | /* Function: ip2_chars_in_buf() */ | |
1803 | /* Parameters: Pointer to tty structure */ | |
1804 | /* Returns: Number of bytes queued for transmission */ | |
1805 | /* */ | |
1806 | /* Description: */ | |
1807 | /* */ | |
1808 | /* */ | |
1809 | /******************************************************************************/ | |
1810 | static int | |
1811 | ip2_chars_in_buf ( PTTY tty ) | |
1812 | { | |
1813 | i2ChanStrPtr pCh = tty->driver_data; | |
1814 | int rc; | |
1815 | unsigned long flags; | |
1816 | ||
1817 | ip2trace (CHANN, ITRC_WRITE, 12, 1, pCh->Obuf_char_count + pCh->Pbuf_stuff ); | |
1818 | ||
1819 | #ifdef IP2DEBUG_WRITE | |
1820 | printk (KERN_DEBUG "IP2: chars in buffer = %d (%d,%d)\n", | |
1821 | pCh->Obuf_char_count + pCh->Pbuf_stuff, | |
1822 | pCh->Obuf_char_count, pCh->Pbuf_stuff ); | |
1823 | #endif | |
1824 | READ_LOCK_IRQSAVE(&pCh->Obuf_spinlock,flags); | |
1825 | rc = pCh->Obuf_char_count; | |
1826 | READ_UNLOCK_IRQRESTORE(&pCh->Obuf_spinlock,flags); | |
1827 | READ_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags); | |
1828 | rc += pCh->Pbuf_stuff; | |
1829 | READ_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags); | |
1830 | return rc; | |
1831 | } | |
1832 | ||
1833 | /******************************************************************************/ | |
1834 | /* Function: ip2_flush_buffer() */ | |
1835 | /* Parameters: Pointer to tty structure */ | |
1836 | /* Returns: Nothing */ | |
1837 | /* */ | |
1838 | /* Description: */ | |
1839 | /* */ | |
1840 | /* */ | |
1841 | /******************************************************************************/ | |
1842 | static void | |
1843 | ip2_flush_buffer( PTTY tty ) | |
1844 | { | |
1845 | i2ChanStrPtr pCh = tty->driver_data; | |
1846 | unsigned long flags; | |
1847 | ||
1848 | ip2trace (CHANN, ITRC_FLUSH, ITRC_ENTER, 0 ); | |
1849 | ||
1850 | #ifdef IP2DEBUG_WRITE | |
1851 | printk (KERN_DEBUG "IP2: flush buffer\n" ); | |
1852 | #endif | |
1853 | WRITE_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags); | |
1854 | pCh->Pbuf_stuff = 0; | |
1855 | WRITE_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags); | |
1856 | i2FlushOutput( pCh ); | |
1857 | ip2_owake(tty); | |
1858 | ||
1859 | ip2trace (CHANN, ITRC_FLUSH, ITRC_RETURN, 0 ); | |
1860 | ||
1861 | } | |
1862 | ||
1863 | /******************************************************************************/ | |
1864 | /* Function: ip2_wait_until_sent() */ | |
1865 | /* Parameters: Pointer to tty structure */ | |
1866 | /* Timeout for wait. */ | |
1867 | /* Returns: Nothing */ | |
1868 | /* */ | |
1869 | /* Description: */ | |
1870 | /* This function is used in place of the normal tty_wait_until_sent, which */ | |
1871 | /* only waits for the driver buffers to be empty (or rather, those buffers */ | |
1872 | /* reported by chars_in_buffer) which doesn't work for IP2 due to the */ | |
1873 | /* indeterminate number of bytes buffered on the board. */ | |
1874 | /******************************************************************************/ | |
1875 | static void | |
1876 | ip2_wait_until_sent ( PTTY tty, int timeout ) | |
1877 | { | |
1878 | int i = jiffies; | |
1879 | i2ChanStrPtr pCh = tty->driver_data; | |
1880 | ||
1881 | tty_wait_until_sent(tty, timeout ); | |
1882 | if ( (i = timeout - (jiffies -i)) > 0) | |
1883 | i2DrainOutput( pCh, i ); | |
1884 | } | |
1885 | ||
1886 | /******************************************************************************/ | |
1887 | /******************************************************************************/ | |
1888 | /* Device Input Section */ | |
1889 | /******************************************************************************/ | |
1890 | /******************************************************************************/ | |
1891 | ||
1892 | /******************************************************************************/ | |
1893 | /* Function: ip2_throttle() */ | |
1894 | /* Parameters: Pointer to tty structure */ | |
1895 | /* Returns: Nothing */ | |
1896 | /* */ | |
1897 | /* Description: */ | |
1898 | /* */ | |
1899 | /* */ | |
1900 | /******************************************************************************/ | |
1901 | static void | |
1902 | ip2_throttle ( PTTY tty ) | |
1903 | { | |
1904 | i2ChanStrPtr pCh = tty->driver_data; | |
1905 | ||
1906 | #ifdef IP2DEBUG_READ | |
1907 | printk (KERN_DEBUG "IP2: throttle\n" ); | |
1908 | #endif | |
1909 | /* | |
1910 | * Signal the poll/interrupt handlers not to forward incoming data to | |
1911 | * the line discipline. This will cause the buffers to fill up in the | |
1912 | * library and thus cause the library routines to send the flow control | |
1913 | * stuff. | |
1914 | */ | |
1915 | pCh->throttled = 1; | |
1916 | } | |
1917 | ||
1918 | /******************************************************************************/ | |
1919 | /* Function: ip2_unthrottle() */ | |
1920 | /* Parameters: Pointer to tty structure */ | |
1921 | /* Returns: Nothing */ | |
1922 | /* */ | |
1923 | /* Description: */ | |
1924 | /* */ | |
1925 | /* */ | |
1926 | /******************************************************************************/ | |
1927 | static void | |
1928 | ip2_unthrottle ( PTTY tty ) | |
1929 | { | |
1930 | i2ChanStrPtr pCh = tty->driver_data; | |
1931 | unsigned long flags; | |
1932 | ||
1933 | #ifdef IP2DEBUG_READ | |
1934 | printk (KERN_DEBUG "IP2: unthrottle\n" ); | |
1935 | #endif | |
1936 | ||
1937 | /* Pass incoming data up to the line discipline again. */ | |
1938 | pCh->throttled = 0; | |
1939 | i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_RESUME); | |
1940 | serviceOutgoingFifo( pCh->pMyBord ); | |
1941 | READ_LOCK_IRQSAVE(&pCh->Ibuf_spinlock,flags) | |
1942 | if ( pCh->Ibuf_stuff != pCh->Ibuf_strip ) { | |
1943 | READ_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags) | |
1944 | #ifdef IP2DEBUG_READ | |
1945 | printk (KERN_DEBUG "i2Input called from unthrottle\n" ); | |
1946 | #endif | |
1947 | i2Input( pCh ); | |
1948 | } else | |
1949 | READ_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags) | |
1950 | } | |
1951 | ||
1952 | static void | |
1953 | ip2_start ( PTTY tty ) | |
1954 | { | |
1955 | i2ChanStrPtr pCh = DevTable[tty->index]; | |
1956 | ||
1957 | i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_RESUME); | |
1958 | i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_UNSUSPEND); | |
1959 | i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_RESUME); | |
1960 | #ifdef IP2DEBUG_WRITE | |
1961 | printk (KERN_DEBUG "IP2: start tx\n" ); | |
1962 | #endif | |
1963 | } | |
1964 | ||
1965 | static void | |
1966 | ip2_stop ( PTTY tty ) | |
1967 | { | |
1968 | i2ChanStrPtr pCh = DevTable[tty->index]; | |
1969 | ||
1970 | i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_SUSPEND); | |
1971 | #ifdef IP2DEBUG_WRITE | |
1972 | printk (KERN_DEBUG "IP2: stop tx\n" ); | |
1973 | #endif | |
1974 | } | |
1975 | ||
1976 | /******************************************************************************/ | |
1977 | /* Device Ioctl Section */ | |
1978 | /******************************************************************************/ | |
1979 | ||
1980 | static int ip2_tiocmget(struct tty_struct *tty, struct file *file) | |
1981 | { | |
1982 | i2ChanStrPtr pCh = DevTable[tty->index]; | |
d9e39538 | 1983 | #ifdef ENABLE_DSSNOW |
1da177e4 | 1984 | wait_queue_t wait; |
d9e39538 | 1985 | #endif |
1da177e4 LT |
1986 | |
1987 | if (pCh == NULL) | |
1988 | return -ENODEV; | |
1989 | ||
1990 | /* | |
1991 | FIXME - the following code is causing a NULL pointer dereference in | |
1992 | 2.3.51 in an interrupt handler. It's suppose to prompt the board | |
1993 | to return the DSS signal status immediately. Why doesn't it do | |
1994 | the same thing in 2.2.14? | |
1995 | */ | |
1996 | ||
1997 | /* This thing is still busted in the 1.2.12 driver on 2.4.x | |
1998 | and even hoses the serial console so the oops can be trapped. | |
1999 | /\/\|=mhw=|\/\/ */ | |
2000 | ||
2001 | #ifdef ENABLE_DSSNOW | |
2002 | i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DSS_NOW); | |
2003 | ||
2004 | init_waitqueue_entry(&wait, current); | |
2005 | add_wait_queue(&pCh->dss_now_wait, &wait); | |
2006 | set_current_state( TASK_INTERRUPTIBLE ); | |
2007 | ||
2008 | serviceOutgoingFifo( pCh->pMyBord ); | |
2009 | ||
2010 | schedule(); | |
2011 | ||
2012 | set_current_state( TASK_RUNNING ); | |
2013 | remove_wait_queue(&pCh->dss_now_wait, &wait); | |
2014 | ||
2015 | if (signal_pending(current)) { | |
2016 | return -EINTR; | |
2017 | } | |
2018 | #endif | |
2019 | return ((pCh->dataSetOut & I2_RTS) ? TIOCM_RTS : 0) | |
2020 | | ((pCh->dataSetOut & I2_DTR) ? TIOCM_DTR : 0) | |
2021 | | ((pCh->dataSetIn & I2_DCD) ? TIOCM_CAR : 0) | |
2022 | | ((pCh->dataSetIn & I2_RI) ? TIOCM_RNG : 0) | |
2023 | | ((pCh->dataSetIn & I2_DSR) ? TIOCM_DSR : 0) | |
2024 | | ((pCh->dataSetIn & I2_CTS) ? TIOCM_CTS : 0); | |
2025 | } | |
2026 | ||
2027 | static int ip2_tiocmset(struct tty_struct *tty, struct file *file, | |
2028 | unsigned int set, unsigned int clear) | |
2029 | { | |
2030 | i2ChanStrPtr pCh = DevTable[tty->index]; | |
2031 | ||
2032 | if (pCh == NULL) | |
2033 | return -ENODEV; | |
2034 | ||
2035 | if (set & TIOCM_RTS) { | |
2036 | i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_RTSUP); | |
2037 | pCh->dataSetOut |= I2_RTS; | |
2038 | } | |
2039 | if (set & TIOCM_DTR) { | |
2040 | i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DTRUP); | |
2041 | pCh->dataSetOut |= I2_DTR; | |
2042 | } | |
2043 | ||
2044 | if (clear & TIOCM_RTS) { | |
2045 | i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_RTSDN); | |
2046 | pCh->dataSetOut &= ~I2_RTS; | |
2047 | } | |
2048 | if (clear & TIOCM_DTR) { | |
2049 | i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DTRDN); | |
2050 | pCh->dataSetOut &= ~I2_DTR; | |
2051 | } | |
2052 | serviceOutgoingFifo( pCh->pMyBord ); | |
2053 | return 0; | |
2054 | } | |
2055 | ||
2056 | /******************************************************************************/ | |
2057 | /* Function: ip2_ioctl() */ | |
2058 | /* Parameters: Pointer to tty structure */ | |
2059 | /* Pointer to file structure */ | |
2060 | /* Command */ | |
2061 | /* Argument */ | |
2062 | /* Returns: Success or failure */ | |
2063 | /* */ | |
2064 | /* Description: */ | |
2065 | /* */ | |
2066 | /* */ | |
2067 | /******************************************************************************/ | |
2068 | static int | |
2069 | ip2_ioctl ( PTTY tty, struct file *pFile, UINT cmd, ULONG arg ) | |
2070 | { | |
2071 | wait_queue_t wait; | |
2072 | i2ChanStrPtr pCh = DevTable[tty->index]; | |
d9e39538 | 2073 | i2eBordStrPtr pB; |
1da177e4 LT |
2074 | struct async_icount cprev, cnow; /* kernel counter temps */ |
2075 | struct serial_icounter_struct __user *p_cuser; | |
2076 | int rc = 0; | |
2077 | unsigned long flags; | |
2078 | void __user *argp = (void __user *)arg; | |
2079 | ||
d9e39538 | 2080 | if ( pCh == NULL ) |
1da177e4 | 2081 | return -ENODEV; |
d9e39538 AC |
2082 | |
2083 | pB = pCh->pMyBord; | |
1da177e4 LT |
2084 | |
2085 | ip2trace (CHANN, ITRC_IOCTL, ITRC_ENTER, 2, cmd, arg ); | |
2086 | ||
2087 | #ifdef IP2DEBUG_IOCTL | |
2088 | printk(KERN_DEBUG "IP2: ioctl cmd (%x), arg (%lx)\n", cmd, arg ); | |
2089 | #endif | |
2090 | ||
2091 | switch(cmd) { | |
2092 | case TIOCGSERIAL: | |
2093 | ||
2094 | ip2trace (CHANN, ITRC_IOCTL, 2, 1, rc ); | |
2095 | ||
2096 | rc = get_serial_info(pCh, argp); | |
2097 | if (rc) | |
2098 | return rc; | |
2099 | break; | |
2100 | ||
2101 | case TIOCSSERIAL: | |
2102 | ||
2103 | ip2trace (CHANN, ITRC_IOCTL, 3, 1, rc ); | |
2104 | ||
2105 | rc = set_serial_info(pCh, argp); | |
2106 | if (rc) | |
2107 | return rc; | |
2108 | break; | |
2109 | ||
2110 | case TCXONC: | |
2111 | rc = tty_check_change(tty); | |
2112 | if (rc) | |
2113 | return rc; | |
2114 | switch (arg) { | |
2115 | case TCOOFF: | |
2116 | //return -ENOIOCTLCMD; | |
2117 | break; | |
2118 | case TCOON: | |
2119 | //return -ENOIOCTLCMD; | |
2120 | break; | |
2121 | case TCIOFF: | |
2122 | if (STOP_CHAR(tty) != __DISABLED_CHAR) { | |
2123 | i2QueueCommands( PTYPE_BYPASS, pCh, 100, 1, | |
2124 | CMD_XMIT_NOW(STOP_CHAR(tty))); | |
2125 | } | |
2126 | break; | |
2127 | case TCION: | |
2128 | if (START_CHAR(tty) != __DISABLED_CHAR) { | |
2129 | i2QueueCommands( PTYPE_BYPASS, pCh, 100, 1, | |
2130 | CMD_XMIT_NOW(START_CHAR(tty))); | |
2131 | } | |
2132 | break; | |
2133 | default: | |
2134 | return -EINVAL; | |
2135 | } | |
2136 | return 0; | |
2137 | ||
2138 | case TCSBRK: /* SVID version: non-zero arg --> no break */ | |
2139 | rc = tty_check_change(tty); | |
2140 | ||
2141 | ip2trace (CHANN, ITRC_IOCTL, 4, 1, rc ); | |
2142 | ||
2143 | if (!rc) { | |
2144 | ip2_wait_until_sent(tty,0); | |
2145 | if (!arg) { | |
2146 | i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_SEND_BRK(250)); | |
2147 | serviceOutgoingFifo( pCh->pMyBord ); | |
2148 | } | |
2149 | } | |
2150 | break; | |
2151 | ||
2152 | case TCSBRKP: /* support for POSIX tcsendbreak() */ | |
2153 | rc = tty_check_change(tty); | |
2154 | ||
2155 | ip2trace (CHANN, ITRC_IOCTL, 5, 1, rc ); | |
2156 | ||
2157 | if (!rc) { | |
2158 | ip2_wait_until_sent(tty,0); | |
2159 | i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, | |
2160 | CMD_SEND_BRK(arg ? arg*100 : 250)); | |
2161 | serviceOutgoingFifo ( pCh->pMyBord ); | |
2162 | } | |
2163 | break; | |
2164 | ||
2165 | case TIOCGSOFTCAR: | |
2166 | ||
2167 | ip2trace (CHANN, ITRC_IOCTL, 6, 1, rc ); | |
2168 | ||
2169 | rc = put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned long __user *)argp); | |
2170 | if (rc) | |
2171 | return rc; | |
2172 | break; | |
2173 | ||
2174 | case TIOCSSOFTCAR: | |
2175 | ||
2176 | ip2trace (CHANN, ITRC_IOCTL, 7, 1, rc ); | |
2177 | ||
2178 | rc = get_user(arg,(unsigned long __user *) argp); | |
2179 | if (rc) | |
2180 | return rc; | |
2181 | tty->termios->c_cflag = ((tty->termios->c_cflag & ~CLOCAL) | |
2182 | | (arg ? CLOCAL : 0)); | |
2183 | ||
2184 | break; | |
2185 | ||
2186 | /* | |
2187 | * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change - mask | |
2188 | * passed in arg for lines of interest (use |'ed TIOCM_RNG/DSR/CD/CTS | |
2189 | * for masking). Caller should use TIOCGICOUNT to see which one it was | |
2190 | */ | |
2191 | case TIOCMIWAIT: | |
d9e39538 | 2192 | WRITE_LOCK_IRQSAVE(&pB->read_fifo_spinlock, flags); |
1da177e4 | 2193 | cprev = pCh->icount; /* note the counters on entry */ |
d9e39538 | 2194 | WRITE_UNLOCK_IRQRESTORE(&pB->read_fifo_spinlock, flags); |
1da177e4 LT |
2195 | i2QueueCommands(PTYPE_BYPASS, pCh, 100, 4, |
2196 | CMD_DCD_REP, CMD_CTS_REP, CMD_DSR_REP, CMD_RI_REP); | |
2197 | init_waitqueue_entry(&wait, current); | |
2198 | add_wait_queue(&pCh->delta_msr_wait, &wait); | |
2199 | set_current_state( TASK_INTERRUPTIBLE ); | |
2200 | ||
2201 | serviceOutgoingFifo( pCh->pMyBord ); | |
2202 | for(;;) { | |
2203 | ip2trace (CHANN, ITRC_IOCTL, 10, 0 ); | |
2204 | ||
2205 | schedule(); | |
2206 | ||
2207 | ip2trace (CHANN, ITRC_IOCTL, 11, 0 ); | |
2208 | ||
2209 | /* see if a signal did it */ | |
2210 | if (signal_pending(current)) { | |
2211 | rc = -ERESTARTSYS; | |
2212 | break; | |
2213 | } | |
d9e39538 | 2214 | WRITE_LOCK_IRQSAVE(&pB->read_fifo_spinlock, flags); |
1da177e4 | 2215 | cnow = pCh->icount; /* atomic copy */ |
d9e39538 | 2216 | WRITE_UNLOCK_IRQRESTORE(&pB->read_fifo_spinlock, flags); |
1da177e4 LT |
2217 | if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && |
2218 | cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) { | |
2219 | rc = -EIO; /* no change => rc */ | |
2220 | break; | |
2221 | } | |
2222 | if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || | |
2223 | ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || | |
2224 | ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || | |
2225 | ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) { | |
2226 | rc = 0; | |
2227 | break; | |
2228 | } | |
2229 | cprev = cnow; | |
2230 | } | |
2231 | set_current_state( TASK_RUNNING ); | |
2232 | remove_wait_queue(&pCh->delta_msr_wait, &wait); | |
2233 | ||
2234 | i2QueueCommands(PTYPE_BYPASS, pCh, 100, 3, | |
2235 | CMD_CTS_NREP, CMD_DSR_NREP, CMD_RI_NREP); | |
2236 | if ( ! (pCh->flags & ASYNC_CHECK_CD)) { | |
2237 | i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DCD_NREP); | |
2238 | } | |
2239 | serviceOutgoingFifo( pCh->pMyBord ); | |
2240 | return rc; | |
2241 | break; | |
2242 | ||
2243 | /* | |
2244 | * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) | |
2245 | * Return: write counters to the user passed counter struct | |
2246 | * NB: both 1->0 and 0->1 transitions are counted except for RI where | |
2247 | * only 0->1 is counted. The controller is quite capable of counting | |
2248 | * both, but this done to preserve compatibility with the standard | |
2249 | * serial driver. | |
2250 | */ | |
2251 | case TIOCGICOUNT: | |
2252 | ip2trace (CHANN, ITRC_IOCTL, 11, 1, rc ); | |
2253 | ||
d9e39538 | 2254 | WRITE_LOCK_IRQSAVE(&pB->read_fifo_spinlock, flags); |
1da177e4 | 2255 | cnow = pCh->icount; |
d9e39538 | 2256 | WRITE_UNLOCK_IRQRESTORE(&pB->read_fifo_spinlock, flags); |
1da177e4 LT |
2257 | p_cuser = argp; |
2258 | rc = put_user(cnow.cts, &p_cuser->cts); | |
2259 | rc = put_user(cnow.dsr, &p_cuser->dsr); | |
2260 | rc = put_user(cnow.rng, &p_cuser->rng); | |
2261 | rc = put_user(cnow.dcd, &p_cuser->dcd); | |
2262 | rc = put_user(cnow.rx, &p_cuser->rx); | |
2263 | rc = put_user(cnow.tx, &p_cuser->tx); | |
2264 | rc = put_user(cnow.frame, &p_cuser->frame); | |
2265 | rc = put_user(cnow.overrun, &p_cuser->overrun); | |
2266 | rc = put_user(cnow.parity, &p_cuser->parity); | |
2267 | rc = put_user(cnow.brk, &p_cuser->brk); | |
2268 | rc = put_user(cnow.buf_overrun, &p_cuser->buf_overrun); | |
2269 | break; | |
2270 | ||
2271 | /* | |
2272 | * The rest are not supported by this driver. By returning -ENOIOCTLCMD they | |
2273 | * will be passed to the line discipline for it to handle. | |
2274 | */ | |
2275 | case TIOCSERCONFIG: | |
2276 | case TIOCSERGWILD: | |
2277 | case TIOCSERGETLSR: | |
2278 | case TIOCSERSWILD: | |
2279 | case TIOCSERGSTRUCT: | |
2280 | case TIOCSERGETMULTI: | |
2281 | case TIOCSERSETMULTI: | |
2282 | ||
2283 | default: | |
2284 | ip2trace (CHANN, ITRC_IOCTL, 12, 0 ); | |
2285 | ||
2286 | rc = -ENOIOCTLCMD; | |
2287 | break; | |
2288 | } | |
2289 | ||
2290 | ip2trace (CHANN, ITRC_IOCTL, ITRC_RETURN, 0 ); | |
2291 | ||
2292 | return rc; | |
2293 | } | |
2294 | ||
2295 | /******************************************************************************/ | |
2296 | /* Function: GetSerialInfo() */ | |
2297 | /* Parameters: Pointer to channel structure */ | |
2298 | /* Pointer to old termios structure */ | |
2299 | /* Returns: Nothing */ | |
2300 | /* */ | |
2301 | /* Description: */ | |
2302 | /* This is to support the setserial command, and requires processing of the */ | |
2303 | /* standard Linux serial structure. */ | |
2304 | /******************************************************************************/ | |
2305 | static int | |
2306 | get_serial_info ( i2ChanStrPtr pCh, struct serial_struct __user *retinfo ) | |
2307 | { | |
2308 | struct serial_struct tmp; | |
2309 | ||
2310 | memset ( &tmp, 0, sizeof(tmp) ); | |
2311 | tmp.type = pCh->pMyBord->channelBtypes.bid_value[(pCh->port_index & (IP2_PORTS_PER_BOARD-1))/16]; | |
2312 | if (BID_HAS_654(tmp.type)) { | |
2313 | tmp.type = PORT_16650; | |
2314 | } else { | |
2315 | tmp.type = PORT_CIRRUS; | |
2316 | } | |
2317 | tmp.line = pCh->port_index; | |
2318 | tmp.port = pCh->pMyBord->i2eBase; | |
2319 | tmp.irq = ip2config.irq[pCh->port_index/64]; | |
2320 | tmp.flags = pCh->flags; | |
2321 | tmp.baud_base = pCh->BaudBase; | |
2322 | tmp.close_delay = pCh->ClosingDelay; | |
2323 | tmp.closing_wait = pCh->ClosingWaitTime; | |
2324 | tmp.custom_divisor = pCh->BaudDivisor; | |
2325 | return copy_to_user(retinfo,&tmp,sizeof(*retinfo)); | |
2326 | } | |
2327 | ||
2328 | /******************************************************************************/ | |
2329 | /* Function: SetSerialInfo() */ | |
2330 | /* Parameters: Pointer to channel structure */ | |
2331 | /* Pointer to old termios structure */ | |
2332 | /* Returns: Nothing */ | |
2333 | /* */ | |
2334 | /* Description: */ | |
2335 | /* This function provides support for setserial, which uses the TIOCSSERIAL */ | |
2336 | /* ioctl. Not all setserial parameters are relevant. If the user attempts to */ | |
2337 | /* change the IRQ, address or type of the port the ioctl fails. */ | |
2338 | /******************************************************************************/ | |
2339 | static int | |
2340 | set_serial_info( i2ChanStrPtr pCh, struct serial_struct __user *new_info ) | |
2341 | { | |
2342 | struct serial_struct ns; | |
2343 | int old_flags, old_baud_divisor; | |
2344 | ||
2345 | if (copy_from_user(&ns, new_info, sizeof (ns))) | |
2346 | return -EFAULT; | |
2347 | ||
2348 | /* | |
2349 | * We don't allow setserial to change IRQ, board address, type or baud | |
2350 | * base. Also line nunber as such is meaningless but we use it for our | |
2351 | * array index so it is fixed also. | |
2352 | */ | |
2353 | if ( (ns.irq != ip2config.irq[pCh->port_index]) | |
2354 | || ((int) ns.port != ((int) (pCh->pMyBord->i2eBase))) | |
2355 | || (ns.baud_base != pCh->BaudBase) | |
2356 | || (ns.line != pCh->port_index) ) { | |
2357 | return -EINVAL; | |
2358 | } | |
2359 | ||
2360 | old_flags = pCh->flags; | |
2361 | old_baud_divisor = pCh->BaudDivisor; | |
2362 | ||
2363 | if ( !capable(CAP_SYS_ADMIN) ) { | |
2364 | if ( ( ns.close_delay != pCh->ClosingDelay ) || | |
2365 | ( (ns.flags & ~ASYNC_USR_MASK) != | |
2366 | (pCh->flags & ~ASYNC_USR_MASK) ) ) { | |
2367 | return -EPERM; | |
2368 | } | |
2369 | ||
2370 | pCh->flags = (pCh->flags & ~ASYNC_USR_MASK) | | |
2371 | (ns.flags & ASYNC_USR_MASK); | |
2372 | pCh->BaudDivisor = ns.custom_divisor; | |
2373 | } else { | |
2374 | pCh->flags = (pCh->flags & ~ASYNC_FLAGS) | | |
2375 | (ns.flags & ASYNC_FLAGS); | |
2376 | pCh->BaudDivisor = ns.custom_divisor; | |
2377 | pCh->ClosingDelay = ns.close_delay * HZ/100; | |
2378 | pCh->ClosingWaitTime = ns.closing_wait * HZ/100; | |
2379 | } | |
2380 | ||
2381 | if ( ( (old_flags & ASYNC_SPD_MASK) != (pCh->flags & ASYNC_SPD_MASK) ) | |
2382 | || (old_baud_divisor != pCh->BaudDivisor) ) { | |
2383 | // Invalidate speed and reset parameters | |
2384 | set_params( pCh, NULL ); | |
2385 | } | |
2386 | ||
2387 | return 0; | |
2388 | } | |
2389 | ||
2390 | /******************************************************************************/ | |
2391 | /* Function: ip2_set_termios() */ | |
2392 | /* Parameters: Pointer to tty structure */ | |
2393 | /* Pointer to old termios structure */ | |
2394 | /* Returns: Nothing */ | |
2395 | /* */ | |
2396 | /* Description: */ | |
2397 | /* */ | |
2398 | /* */ | |
2399 | /******************************************************************************/ | |
2400 | static void | |
2401 | ip2_set_termios( PTTY tty, struct termios *old_termios ) | |
2402 | { | |
2403 | i2ChanStrPtr pCh = (i2ChanStrPtr)tty->driver_data; | |
2404 | ||
2405 | #ifdef IP2DEBUG_IOCTL | |
2406 | printk (KERN_DEBUG "IP2: set termios %p\n", old_termios ); | |
2407 | #endif | |
2408 | ||
2409 | set_params( pCh, old_termios ); | |
2410 | } | |
2411 | ||
2412 | /******************************************************************************/ | |
2413 | /* Function: ip2_set_line_discipline() */ | |
2414 | /* Parameters: Pointer to tty structure */ | |
2415 | /* Returns: Nothing */ | |
2416 | /* */ | |
2417 | /* Description: Does nothing */ | |
2418 | /* */ | |
2419 | /* */ | |
2420 | /******************************************************************************/ | |
2421 | static void | |
2422 | ip2_set_line_discipline ( PTTY tty ) | |
2423 | { | |
2424 | #ifdef IP2DEBUG_IOCTL | |
2425 | printk (KERN_DEBUG "IP2: set line discipline\n" ); | |
2426 | #endif | |
2427 | ||
2428 | ip2trace (((i2ChanStrPtr)tty->driver_data)->port_index, ITRC_IOCTL, 16, 0 ); | |
2429 | ||
2430 | } | |
2431 | ||
2432 | /******************************************************************************/ | |
2433 | /* Function: SetLine Characteristics() */ | |
2434 | /* Parameters: Pointer to channel structure */ | |
2435 | /* Returns: Nothing */ | |
2436 | /* */ | |
2437 | /* Description: */ | |
2438 | /* This routine is called to update the channel structure with the new line */ | |
2439 | /* characteristics, and send the appropriate commands to the board when they */ | |
2440 | /* change. */ | |
2441 | /******************************************************************************/ | |
2442 | static void | |
2443 | set_params( i2ChanStrPtr pCh, struct termios *o_tios ) | |
2444 | { | |
2445 | tcflag_t cflag, iflag, lflag; | |
2446 | char stop_char, start_char; | |
2447 | struct termios dummy; | |
2448 | ||
2449 | lflag = pCh->pTTY->termios->c_lflag; | |
2450 | cflag = pCh->pTTY->termios->c_cflag; | |
2451 | iflag = pCh->pTTY->termios->c_iflag; | |
2452 | ||
2453 | if (o_tios == NULL) { | |
2454 | dummy.c_lflag = ~lflag; | |
2455 | dummy.c_cflag = ~cflag; | |
2456 | dummy.c_iflag = ~iflag; | |
2457 | o_tios = &dummy; | |
2458 | } | |
2459 | ||
2460 | { | |
2461 | switch ( cflag & CBAUD ) { | |
2462 | case B0: | |
2463 | i2QueueCommands( PTYPE_BYPASS, pCh, 100, 2, CMD_RTSDN, CMD_DTRDN); | |
2464 | pCh->dataSetOut &= ~(I2_DTR | I2_RTS); | |
2465 | i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_PAUSE(25)); | |
2466 | pCh->pTTY->termios->c_cflag |= (CBAUD & o_tios->c_cflag); | |
2467 | goto service_it; | |
2468 | break; | |
2469 | case B38400: | |
2470 | /* | |
2471 | * This is the speed that is overloaded with all the other high | |
2472 | * speeds, depending upon the flag settings. | |
2473 | */ | |
2474 | if ( ( pCh->flags & ASYNC_SPD_MASK ) == ASYNC_SPD_HI ) { | |
2475 | pCh->speed = CBR_57600; | |
2476 | } else if ( (pCh->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI ) { | |
2477 | pCh->speed = CBR_115200; | |
2478 | } else if ( (pCh->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST ) { | |
2479 | pCh->speed = CBR_C1; | |
2480 | } else { | |
2481 | pCh->speed = CBR_38400; | |
2482 | } | |
2483 | break; | |
2484 | case B50: pCh->speed = CBR_50; break; | |
2485 | case B75: pCh->speed = CBR_75; break; | |
2486 | case B110: pCh->speed = CBR_110; break; | |
2487 | case B134: pCh->speed = CBR_134; break; | |
2488 | case B150: pCh->speed = CBR_150; break; | |
2489 | case B200: pCh->speed = CBR_200; break; | |
2490 | case B300: pCh->speed = CBR_300; break; | |
2491 | case B600: pCh->speed = CBR_600; break; | |
2492 | case B1200: pCh->speed = CBR_1200; break; | |
2493 | case B1800: pCh->speed = CBR_1800; break; | |
2494 | case B2400: pCh->speed = CBR_2400; break; | |
2495 | case B4800: pCh->speed = CBR_4800; break; | |
2496 | case B9600: pCh->speed = CBR_9600; break; | |
2497 | case B19200: pCh->speed = CBR_19200; break; | |
2498 | case B57600: pCh->speed = CBR_57600; break; | |
2499 | case B115200: pCh->speed = CBR_115200; break; | |
2500 | case B153600: pCh->speed = CBR_153600; break; | |
2501 | case B230400: pCh->speed = CBR_230400; break; | |
2502 | case B307200: pCh->speed = CBR_307200; break; | |
2503 | case B460800: pCh->speed = CBR_460800; break; | |
2504 | case B921600: pCh->speed = CBR_921600; break; | |
2505 | default: pCh->speed = CBR_9600; break; | |
2506 | } | |
2507 | if ( pCh->speed == CBR_C1 ) { | |
2508 | // Process the custom speed parameters. | |
2509 | int bps = pCh->BaudBase / pCh->BaudDivisor; | |
2510 | if ( bps == 921600 ) { | |
2511 | pCh->speed = CBR_921600; | |
2512 | } else { | |
2513 | bps = bps/10; | |
2514 | i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_BAUD_DEF1(bps) ); | |
2515 | } | |
2516 | } | |
2517 | i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_SETBAUD(pCh->speed)); | |
2518 | ||
2519 | i2QueueCommands ( PTYPE_INLINE, pCh, 100, 2, CMD_DTRUP, CMD_RTSUP); | |
2520 | pCh->dataSetOut |= (I2_DTR | I2_RTS); | |
2521 | } | |
2522 | if ( (CSTOPB & cflag) ^ (CSTOPB & o_tios->c_cflag)) | |
2523 | { | |
2524 | i2QueueCommands ( PTYPE_INLINE, pCh, 100, 1, | |
2525 | CMD_SETSTOP( ( cflag & CSTOPB ) ? CST_2 : CST_1)); | |
2526 | } | |
2527 | if (((PARENB|PARODD) & cflag) ^ ((PARENB|PARODD) & o_tios->c_cflag)) | |
2528 | { | |
2529 | i2QueueCommands ( PTYPE_INLINE, pCh, 100, 1, | |
2530 | CMD_SETPAR( | |
2531 | (cflag & PARENB ? (cflag & PARODD ? CSP_OD : CSP_EV) : CSP_NP) | |
2532 | ) | |
2533 | ); | |
2534 | } | |
2535 | /* byte size and parity */ | |
2536 | if ( (CSIZE & cflag)^(CSIZE & o_tios->c_cflag)) | |
2537 | { | |
2538 | int datasize; | |
2539 | switch ( cflag & CSIZE ) { | |
2540 | case CS5: datasize = CSZ_5; break; | |
2541 | case CS6: datasize = CSZ_6; break; | |
2542 | case CS7: datasize = CSZ_7; break; | |
2543 | case CS8: datasize = CSZ_8; break; | |
2544 | default: datasize = CSZ_5; break; /* as per serial.c */ | |
2545 | } | |
2546 | i2QueueCommands ( PTYPE_INLINE, pCh, 100, 1, CMD_SETBITS(datasize) ); | |
2547 | } | |
2548 | /* Process CTS flow control flag setting */ | |
2549 | if ( (cflag & CRTSCTS) ) { | |
2550 | i2QueueCommands(PTYPE_INLINE, pCh, 100, | |
2551 | 2, CMD_CTSFL_ENAB, CMD_RTSFL_ENAB); | |
2552 | } else { | |
2553 | i2QueueCommands(PTYPE_INLINE, pCh, 100, | |
2554 | 2, CMD_CTSFL_DSAB, CMD_RTSFL_DSAB); | |
2555 | } | |
2556 | // | |
2557 | // Process XON/XOFF flow control flags settings | |
2558 | // | |
2559 | stop_char = STOP_CHAR(pCh->pTTY); | |
2560 | start_char = START_CHAR(pCh->pTTY); | |
2561 | ||
2562 | //////////// can't be \000 | |
2563 | if (stop_char == __DISABLED_CHAR ) | |
2564 | { | |
2565 | stop_char = ~__DISABLED_CHAR; | |
2566 | } | |
2567 | if (start_char == __DISABLED_CHAR ) | |
2568 | { | |
2569 | start_char = ~__DISABLED_CHAR; | |
2570 | } | |
2571 | ///////////////////////////////// | |
2572 | ||
2573 | if ( o_tios->c_cc[VSTART] != start_char ) | |
2574 | { | |
2575 | i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DEF_IXON(start_char)); | |
2576 | i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DEF_OXON(start_char)); | |
2577 | } | |
2578 | if ( o_tios->c_cc[VSTOP] != stop_char ) | |
2579 | { | |
2580 | i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DEF_IXOFF(stop_char)); | |
2581 | i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DEF_OXOFF(stop_char)); | |
2582 | } | |
2583 | if (stop_char == __DISABLED_CHAR ) | |
2584 | { | |
2585 | stop_char = ~__DISABLED_CHAR; //TEST123 | |
2586 | goto no_xoff; | |
2587 | } | |
2588 | if ((iflag & (IXOFF))^(o_tios->c_iflag & (IXOFF))) | |
2589 | { | |
2590 | if ( iflag & IXOFF ) { // Enable XOFF output flow control | |
2591 | i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_OXON_OPT(COX_XON)); | |
2592 | } else { // Disable XOFF output flow control | |
2593 | no_xoff: | |
2594 | i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_OXON_OPT(COX_NONE)); | |
2595 | } | |
2596 | } | |
2597 | if (start_char == __DISABLED_CHAR ) | |
2598 | { | |
2599 | goto no_xon; | |
2600 | } | |
2601 | if ((iflag & (IXON|IXANY)) ^ (o_tios->c_iflag & (IXON|IXANY))) | |
2602 | { | |
2603 | if ( iflag & IXON ) { | |
2604 | if ( iflag & IXANY ) { // Enable XON/XANY output flow control | |
2605 | i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_IXON_OPT(CIX_XANY)); | |
2606 | } else { // Enable XON output flow control | |
2607 | i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_IXON_OPT(CIX_XON)); | |
2608 | } | |
2609 | } else { // Disable XON output flow control | |
2610 | no_xon: | |
2611 | i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_IXON_OPT(CIX_NONE)); | |
2612 | } | |
2613 | } | |
2614 | if ( (iflag & ISTRIP) ^ ( o_tios->c_iflag & (ISTRIP)) ) | |
2615 | { | |
2616 | i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, | |
2617 | CMD_ISTRIP_OPT((iflag & ISTRIP ? 1 : 0))); | |
2618 | } | |
2619 | if ( (iflag & INPCK) ^ ( o_tios->c_iflag & (INPCK)) ) | |
2620 | { | |
2621 | i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, | |
2622 | CMD_PARCHK((iflag & INPCK) ? CPK_ENAB : CPK_DSAB)); | |
2623 | } | |
2624 | ||
2625 | if ( (iflag & (IGNBRK|PARMRK|BRKINT|IGNPAR)) | |
2626 | ^ ( o_tios->c_iflag & (IGNBRK|PARMRK|BRKINT|IGNPAR)) ) | |
2627 | { | |
2628 | char brkrpt = 0; | |
2629 | char parrpt = 0; | |
2630 | ||
2631 | if ( iflag & IGNBRK ) { /* Ignore breaks altogether */ | |
2632 | /* Ignore breaks altogether */ | |
2633 | i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_BRK_NREP); | |
2634 | } else { | |
2635 | if ( iflag & BRKINT ) { | |
2636 | if ( iflag & PARMRK ) { | |
2637 | brkrpt = 0x0a; // exception an inline triple | |
2638 | } else { | |
2639 | brkrpt = 0x1a; // exception and NULL | |
2640 | } | |
2641 | brkrpt |= 0x04; // flush input | |
2642 | } else { | |
2643 | if ( iflag & PARMRK ) { | |
2644 | brkrpt = 0x0b; //POSIX triple \0377 \0 \0 | |
2645 | } else { | |
2646 | brkrpt = 0x01; // Null only | |
2647 | } | |
2648 | } | |
2649 | i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_BRK_REP(brkrpt)); | |
2650 | } | |
2651 | ||
2652 | if (iflag & IGNPAR) { | |
2653 | parrpt = 0x20; | |
2654 | /* would be 2 for not cirrus bug */ | |
2655 | /* would be 0x20 cept for cirrus bug */ | |
2656 | } else { | |
2657 | if ( iflag & PARMRK ) { | |
2658 | /* | |
2659 | * Replace error characters with 3-byte sequence (\0377,\0,char) | |
2660 | */ | |
2661 | parrpt = 0x04 ; | |
2662 | i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_ISTRIP_OPT((char)0)); | |
2663 | } else { | |
2664 | parrpt = 0x03; | |
2665 | } | |
2666 | } | |
2667 | i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_SET_ERROR(parrpt)); | |
2668 | } | |
2669 | if (cflag & CLOCAL) { | |
2670 | // Status reporting fails for DCD if this is off | |
2671 | i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DCD_NREP); | |
2672 | pCh->flags &= ~ASYNC_CHECK_CD; | |
2673 | } else { | |
2674 | i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DCD_REP); | |
2675 | pCh->flags |= ASYNC_CHECK_CD; | |
2676 | } | |
2677 | ||
1da177e4 LT |
2678 | service_it: |
2679 | i2DrainOutput( pCh, 100 ); | |
2680 | } | |
2681 | ||
2682 | /******************************************************************************/ | |
2683 | /* IPL Device Section */ | |
2684 | /******************************************************************************/ | |
2685 | ||
2686 | /******************************************************************************/ | |
2687 | /* Function: ip2_ipl_read() */ | |
2688 | /* Parameters: Pointer to device inode */ | |
2689 | /* Pointer to file structure */ | |
2690 | /* Pointer to data */ | |
2691 | /* Number of bytes to read */ | |
2692 | /* Returns: Success or failure */ | |
2693 | /* */ | |
2694 | /* Description: Ugly */ | |
2695 | /* */ | |
2696 | /* */ | |
2697 | /******************************************************************************/ | |
2698 | ||
2699 | static | |
2700 | ssize_t | |
2701 | ip2_ipl_read(struct file *pFile, char __user *pData, size_t count, loff_t *off ) | |
2702 | { | |
a7113a96 | 2703 | unsigned int minor = iminor(pFile->f_path.dentry->d_inode); |
1da177e4 LT |
2704 | int rc = 0; |
2705 | ||
2706 | #ifdef IP2DEBUG_IPL | |
2707 | printk (KERN_DEBUG "IP2IPL: read %p, %d bytes\n", pData, count ); | |
2708 | #endif | |
2709 | ||
2710 | switch( minor ) { | |
2711 | case 0: // IPL device | |
2712 | rc = -EINVAL; | |
2713 | break; | |
2714 | case 1: // Status dump | |
2715 | rc = -EINVAL; | |
2716 | break; | |
2717 | case 2: // Ping device | |
2718 | rc = -EINVAL; | |
2719 | break; | |
2720 | case 3: // Trace device | |
2721 | rc = DumpTraceBuffer ( pData, count ); | |
2722 | break; | |
2723 | case 4: // Trace device | |
2724 | rc = DumpFifoBuffer ( pData, count ); | |
2725 | break; | |
2726 | default: | |
2727 | rc = -ENODEV; | |
2728 | break; | |
2729 | } | |
2730 | return rc; | |
2731 | } | |
2732 | ||
2733 | static int | |
2734 | DumpFifoBuffer ( char __user *pData, int count ) | |
2735 | { | |
2736 | #ifdef DEBUG_FIFO | |
2737 | int rc; | |
2738 | rc = copy_to_user(pData, DBGBuf, count); | |
2739 | ||
2740 | printk(KERN_DEBUG "Last index %d\n", I ); | |
2741 | ||
2742 | return count; | |
2743 | #endif /* DEBUG_FIFO */ | |
2744 | return 0; | |
2745 | } | |
2746 | ||
2747 | static int | |
2748 | DumpTraceBuffer ( char __user *pData, int count ) | |
2749 | { | |
2750 | #ifdef IP2DEBUG_TRACE | |
2751 | int rc; | |
2752 | int dumpcount; | |
2753 | int chunk; | |
2754 | int *pIndex = (int __user *)pData; | |
2755 | ||
2756 | if ( count < (sizeof(int) * 6) ) { | |
2757 | return -EIO; | |
2758 | } | |
2759 | rc = put_user(tracewrap, pIndex ); | |
2760 | rc = put_user(TRACEMAX, ++pIndex ); | |
2761 | rc = put_user(tracestrip, ++pIndex ); | |
2762 | rc = put_user(tracestuff, ++pIndex ); | |
2763 | pData += sizeof(int) * 6; | |
2764 | count -= sizeof(int) * 6; | |
2765 | ||
2766 | dumpcount = tracestuff - tracestrip; | |
2767 | if ( dumpcount < 0 ) { | |
2768 | dumpcount += TRACEMAX; | |
2769 | } | |
2770 | if ( dumpcount > count ) { | |
2771 | dumpcount = count; | |
2772 | } | |
2773 | chunk = TRACEMAX - tracestrip; | |
2774 | if ( dumpcount > chunk ) { | |
2775 | rc = copy_to_user(pData, &tracebuf[tracestrip], | |
2776 | chunk * sizeof(tracebuf[0]) ); | |
2777 | pData += chunk * sizeof(tracebuf[0]); | |
2778 | tracestrip = 0; | |
2779 | chunk = dumpcount - chunk; | |
2780 | } else { | |
2781 | chunk = dumpcount; | |
2782 | } | |
2783 | rc = copy_to_user(pData, &tracebuf[tracestrip], | |
2784 | chunk * sizeof(tracebuf[0]) ); | |
2785 | tracestrip += chunk; | |
2786 | tracewrap = 0; | |
2787 | ||
2788 | rc = put_user(tracestrip, ++pIndex ); | |
2789 | rc = put_user(tracestuff, ++pIndex ); | |
2790 | ||
2791 | return dumpcount; | |
2792 | #else | |
2793 | return 0; | |
2794 | #endif | |
2795 | } | |
2796 | ||
2797 | /******************************************************************************/ | |
2798 | /* Function: ip2_ipl_write() */ | |
2799 | /* Parameters: */ | |
2800 | /* Pointer to file structure */ | |
2801 | /* Pointer to data */ | |
2802 | /* Number of bytes to write */ | |
2803 | /* Returns: Success or failure */ | |
2804 | /* */ | |
2805 | /* Description: */ | |
2806 | /* */ | |
2807 | /* */ | |
2808 | /******************************************************************************/ | |
2809 | static ssize_t | |
2810 | ip2_ipl_write(struct file *pFile, const char __user *pData, size_t count, loff_t *off) | |
2811 | { | |
2812 | #ifdef IP2DEBUG_IPL | |
2813 | printk (KERN_DEBUG "IP2IPL: write %p, %d bytes\n", pData, count ); | |
2814 | #endif | |
2815 | return 0; | |
2816 | } | |
2817 | ||
2818 | /******************************************************************************/ | |
2819 | /* Function: ip2_ipl_ioctl() */ | |
2820 | /* Parameters: Pointer to device inode */ | |
2821 | /* Pointer to file structure */ | |
2822 | /* Command */ | |
2823 | /* Argument */ | |
2824 | /* Returns: Success or failure */ | |
2825 | /* */ | |
2826 | /* Description: */ | |
2827 | /* */ | |
2828 | /* */ | |
2829 | /******************************************************************************/ | |
2830 | static int | |
2831 | ip2_ipl_ioctl ( struct inode *pInode, struct file *pFile, UINT cmd, ULONG arg ) | |
2832 | { | |
2833 | unsigned int iplminor = iminor(pInode); | |
2834 | int rc = 0; | |
2835 | void __user *argp = (void __user *)arg; | |
2836 | ULONG __user *pIndex = argp; | |
2837 | i2eBordStrPtr pB = i2BoardPtrTable[iplminor / 4]; | |
2838 | i2ChanStrPtr pCh; | |
2839 | ||
2840 | #ifdef IP2DEBUG_IPL | |
2841 | printk (KERN_DEBUG "IP2IPL: ioctl cmd %d, arg %ld\n", cmd, arg ); | |
2842 | #endif | |
2843 | ||
2844 | switch ( iplminor ) { | |
2845 | case 0: // IPL device | |
2846 | rc = -EINVAL; | |
2847 | break; | |
2848 | case 1: // Status dump | |
2849 | case 5: | |
2850 | case 9: | |
2851 | case 13: | |
2852 | switch ( cmd ) { | |
2853 | case 64: /* Driver - ip2stat */ | |
2854 | rc = put_user(ip2_tty_driver->refcount, pIndex++ ); | |
2855 | rc = put_user(irq_counter, pIndex++ ); | |
2856 | rc = put_user(bh_counter, pIndex++ ); | |
2857 | break; | |
2858 | ||
2859 | case 65: /* Board - ip2stat */ | |
2860 | if ( pB ) { | |
2861 | rc = copy_to_user(argp, pB, sizeof(i2eBordStr)); | |
2862 | rc = put_user(INB(pB->i2eStatus), | |
2863 | (ULONG __user *)(arg + (ULONG)(&pB->i2eStatus) - (ULONG)pB ) ); | |
2864 | } else { | |
2865 | rc = -ENODEV; | |
2866 | } | |
2867 | break; | |
2868 | ||
2869 | default: | |
2870 | if (cmd < IP2_MAX_PORTS) { | |
2871 | pCh = DevTable[cmd]; | |
2872 | if ( pCh ) | |
2873 | { | |
2874 | rc = copy_to_user(argp, pCh, sizeof(i2ChanStr)); | |
2875 | } else { | |
2876 | rc = -ENODEV; | |
2877 | } | |
2878 | } else { | |
2879 | rc = -EINVAL; | |
2880 | } | |
2881 | } | |
2882 | break; | |
2883 | ||
2884 | case 2: // Ping device | |
2885 | rc = -EINVAL; | |
2886 | break; | |
2887 | case 3: // Trace device | |
def9391c AM |
2888 | /* |
2889 | * akpm: This used to write a whole bunch of function addresses | |
2890 | * to userspace, which generated lots of put_user() warnings. | |
2891 | * I killed it all. Just return "success" and don't do | |
2892 | * anything. | |
2893 | */ | |
2894 | if (cmd == 1) | |
2895 | rc = 0; | |
2896 | else | |
1da177e4 | 2897 | rc = -EINVAL; |
1da177e4 LT |
2898 | break; |
2899 | ||
2900 | default: | |
2901 | rc = -ENODEV; | |
2902 | break; | |
2903 | } | |
2904 | return rc; | |
2905 | } | |
2906 | ||
2907 | /******************************************************************************/ | |
2908 | /* Function: ip2_ipl_open() */ | |
2909 | /* Parameters: Pointer to device inode */ | |
2910 | /* Pointer to file structure */ | |
2911 | /* Returns: Success or failure */ | |
2912 | /* */ | |
2913 | /* Description: */ | |
2914 | /* */ | |
2915 | /* */ | |
2916 | /******************************************************************************/ | |
2917 | static int | |
2918 | ip2_ipl_open( struct inode *pInode, struct file *pFile ) | |
2919 | { | |
2920 | unsigned int iplminor = iminor(pInode); | |
2921 | i2eBordStrPtr pB; | |
2922 | i2ChanStrPtr pCh; | |
2923 | ||
2924 | #ifdef IP2DEBUG_IPL | |
2925 | printk (KERN_DEBUG "IP2IPL: open\n" ); | |
2926 | #endif | |
2927 | ||
2928 | switch(iplminor) { | |
2929 | // These are the IPL devices | |
2930 | case 0: | |
2931 | case 4: | |
2932 | case 8: | |
2933 | case 12: | |
2934 | break; | |
2935 | ||
2936 | // These are the status devices | |
2937 | case 1: | |
2938 | case 5: | |
2939 | case 9: | |
2940 | case 13: | |
2941 | break; | |
2942 | ||
2943 | // These are the debug devices | |
2944 | case 2: | |
2945 | case 6: | |
2946 | case 10: | |
2947 | case 14: | |
2948 | pB = i2BoardPtrTable[iplminor / 4]; | |
2949 | pCh = (i2ChanStrPtr) pB->i2eChannelPtr; | |
2950 | break; | |
2951 | ||
2952 | // This is the trace device | |
2953 | case 3: | |
2954 | break; | |
2955 | } | |
2956 | return 0; | |
2957 | } | |
2958 | /******************************************************************************/ | |
2959 | /* Function: ip2_read_procmem */ | |
2960 | /* Parameters: */ | |
2961 | /* */ | |
2962 | /* Returns: Length of output */ | |
2963 | /* */ | |
2964 | /* Description: */ | |
2965 | /* Supplies some driver operating parameters */ | |
2966 | /* Not real useful unless your debugging the fifo */ | |
2967 | /* */ | |
2968 | /******************************************************************************/ | |
2969 | ||
2970 | #define LIMIT (PAGE_SIZE - 120) | |
2971 | ||
2972 | static int | |
2973 | ip2_read_procmem(char *buf, char **start, off_t offset, int len) | |
2974 | { | |
2975 | i2eBordStrPtr pB; | |
2976 | i2ChanStrPtr pCh; | |
2977 | PTTY tty; | |
2978 | int i; | |
2979 | ||
2980 | len = 0; | |
2981 | ||
2982 | #define FMTLINE "%3d: 0x%08x 0x%08x 0%011o 0%011o\n" | |
2983 | #define FMTLIN2 " 0x%04x 0x%04x tx flow 0x%x\n" | |
2984 | #define FMTLIN3 " 0x%04x 0x%04x rc flow\n" | |
2985 | ||
2986 | len += sprintf(buf+len,"\n"); | |
2987 | ||
2988 | for( i = 0; i < IP2_MAX_BOARDS; ++i ) { | |
2989 | pB = i2BoardPtrTable[i]; | |
2990 | if ( pB ) { | |
2991 | len += sprintf(buf+len,"board %d:\n",i); | |
2992 | len += sprintf(buf+len,"\tFifo rem: %d mty: %x outM %x\n", | |
2993 | pB->i2eFifoRemains,pB->i2eWaitingForEmptyFifo,pB->i2eOutMailWaiting); | |
2994 | } | |
2995 | } | |
2996 | ||
2997 | len += sprintf(buf+len,"#: tty flags, port flags, cflags, iflags\n"); | |
2998 | for (i=0; i < IP2_MAX_PORTS; i++) { | |
2999 | if (len > LIMIT) | |
3000 | break; | |
3001 | pCh = DevTable[i]; | |
3002 | if (pCh) { | |
3003 | tty = pCh->pTTY; | |
3004 | if (tty && tty->count) { | |
3005 | len += sprintf(buf+len,FMTLINE,i,(int)tty->flags,pCh->flags, | |
3006 | tty->termios->c_cflag,tty->termios->c_iflag); | |
3007 | ||
3008 | len += sprintf(buf+len,FMTLIN2, | |
3009 | pCh->outfl.asof,pCh->outfl.room,pCh->channelNeeds); | |
3010 | len += sprintf(buf+len,FMTLIN3,pCh->infl.asof,pCh->infl.room); | |
3011 | } | |
3012 | } | |
3013 | } | |
3014 | return len; | |
3015 | } | |
3016 | ||
3017 | /* | |
3018 | * This is the handler for /proc/tty/driver/ip2 | |
3019 | * | |
3020 | * This stretch of code has been largely plagerized from at least three | |
3021 | * different sources including ip2mkdev.c and a couple of other drivers. | |
3022 | * The bugs are all mine. :-) =mhw= | |
3023 | */ | |
3024 | static int ip2_read_proc(char *page, char **start, off_t off, | |
3025 | int count, int *eof, void *data) | |
3026 | { | |
3027 | int i, j, box; | |
3028 | int len = 0; | |
3029 | int boxes = 0; | |
3030 | int ports = 0; | |
3031 | int tports = 0; | |
3032 | off_t begin = 0; | |
3033 | i2eBordStrPtr pB; | |
3034 | ||
3035 | len += sprintf(page, "ip2info: 1.0 driver: %s\n", pcVersion ); | |
3036 | len += sprintf(page+len, "Driver: SMajor=%d CMajor=%d IMajor=%d MaxBoards=%d MaxBoxes=%d MaxPorts=%d\n", | |
3037 | IP2_TTY_MAJOR, IP2_CALLOUT_MAJOR, IP2_IPL_MAJOR, | |
3038 | IP2_MAX_BOARDS, ABS_MAX_BOXES, ABS_BIGGEST_BOX); | |
3039 | ||
3040 | for( i = 0; i < IP2_MAX_BOARDS; ++i ) { | |
3041 | /* This need to be reset for a board by board count... */ | |
3042 | boxes = 0; | |
3043 | pB = i2BoardPtrTable[i]; | |
3044 | if( pB ) { | |
3045 | switch( pB->i2ePom.e.porID & ~POR_ID_RESERVED ) | |
3046 | { | |
3047 | case POR_ID_FIIEX: | |
3048 | len += sprintf( page+len, "Board %d: EX ports=", i ); | |
3049 | for( box = 0; box < ABS_MAX_BOXES; ++box ) | |
3050 | { | |
3051 | ports = 0; | |
3052 | ||
3053 | if( pB->i2eChannelMap[box] != 0 ) ++boxes; | |
3054 | for( j = 0; j < ABS_BIGGEST_BOX; ++j ) | |
3055 | { | |
3056 | if( pB->i2eChannelMap[box] & 1<< j ) { | |
3057 | ++ports; | |
3058 | } | |
3059 | } | |
3060 | len += sprintf( page+len, "%d,", ports ); | |
3061 | tports += ports; | |
3062 | } | |
3063 | ||
3064 | --len; /* Backup over that last comma */ | |
3065 | ||
3066 | len += sprintf( page+len, " boxes=%d width=%d", boxes, pB->i2eDataWidth16 ? 16 : 8 ); | |
3067 | break; | |
3068 | ||
3069 | case POR_ID_II_4: | |
3070 | len += sprintf(page+len, "Board %d: ISA-4 ports=4 boxes=1", i ); | |
3071 | tports = ports = 4; | |
3072 | break; | |
3073 | ||
3074 | case POR_ID_II_8: | |
3075 | len += sprintf(page+len, "Board %d: ISA-8-std ports=8 boxes=1", i ); | |
3076 | tports = ports = 8; | |
3077 | break; | |
3078 | ||
3079 | case POR_ID_II_8R: | |
3080 | len += sprintf(page+len, "Board %d: ISA-8-RJ11 ports=8 boxes=1", i ); | |
3081 | tports = ports = 8; | |
3082 | break; | |
3083 | ||
3084 | default: | |
3085 | len += sprintf(page+len, "Board %d: unknown", i ); | |
3086 | /* Don't try and probe for minor numbers */ | |
3087 | tports = ports = 0; | |
3088 | } | |
3089 | ||
3090 | } else { | |
3091 | /* Don't try and probe for minor numbers */ | |
3092 | len += sprintf(page+len, "Board %d: vacant", i ); | |
3093 | tports = ports = 0; | |
3094 | } | |
3095 | ||
3096 | if( tports ) { | |
3097 | len += sprintf(page+len, " minors=" ); | |
3098 | ||
3099 | for ( box = 0; box < ABS_MAX_BOXES; ++box ) | |
3100 | { | |
3101 | for ( j = 0; j < ABS_BIGGEST_BOX; ++j ) | |
3102 | { | |
3103 | if ( pB->i2eChannelMap[box] & (1 << j) ) | |
3104 | { | |
3105 | len += sprintf (page+len,"%d,", | |
3106 | j + ABS_BIGGEST_BOX * | |
3107 | (box+i*ABS_MAX_BOXES)); | |
3108 | } | |
3109 | } | |
3110 | } | |
3111 | ||
3112 | page[ len - 1 ] = '\n'; /* Overwrite that last comma */ | |
3113 | } else { | |
3114 | len += sprintf (page+len,"\n" ); | |
3115 | } | |
3116 | ||
3117 | if (len+begin > off+count) | |
3118 | break; | |
3119 | if (len+begin < off) { | |
3120 | begin += len; | |
3121 | len = 0; | |
3122 | } | |
3123 | } | |
3124 | ||
3125 | if (i >= IP2_MAX_BOARDS) | |
3126 | *eof = 1; | |
3127 | if (off >= len+begin) | |
3128 | return 0; | |
3129 | ||
3130 | *start = page + (off-begin); | |
3131 | return ((count < begin+len-off) ? count : begin+len-off); | |
3132 | } | |
3133 | ||
3134 | /******************************************************************************/ | |
3135 | /* Function: ip2trace() */ | |
3136 | /* Parameters: Value to add to trace buffer */ | |
3137 | /* Returns: Nothing */ | |
3138 | /* */ | |
3139 | /* Description: */ | |
3140 | /* */ | |
3141 | /* */ | |
3142 | /******************************************************************************/ | |
3143 | #ifdef IP2DEBUG_TRACE | |
3144 | void | |
3145 | ip2trace (unsigned short pn, unsigned char cat, unsigned char label, unsigned long codes, ...) | |
3146 | { | |
3147 | long flags; | |
3148 | unsigned long *pCode = &codes; | |
3149 | union ip2breadcrumb bc; | |
3150 | i2ChanStrPtr pCh; | |
3151 | ||
3152 | ||
3153 | tracebuf[tracestuff++] = jiffies; | |
3154 | if ( tracestuff == TRACEMAX ) { | |
3155 | tracestuff = 0; | |
3156 | } | |
3157 | if ( tracestuff == tracestrip ) { | |
3158 | if ( ++tracestrip == TRACEMAX ) { | |
3159 | tracestrip = 0; | |
3160 | } | |
3161 | ++tracewrap; | |
3162 | } | |
3163 | ||
3164 | bc.hdr.port = 0xff & pn; | |
3165 | bc.hdr.cat = cat; | |
3166 | bc.hdr.codes = (unsigned char)( codes & 0xff ); | |
3167 | bc.hdr.label = label; | |
3168 | tracebuf[tracestuff++] = bc.value; | |
3169 | ||
3170 | for (;;) { | |
3171 | if ( tracestuff == TRACEMAX ) { | |
3172 | tracestuff = 0; | |
3173 | } | |
3174 | if ( tracestuff == tracestrip ) { | |
3175 | if ( ++tracestrip == TRACEMAX ) { | |
3176 | tracestrip = 0; | |
3177 | } | |
3178 | ++tracewrap; | |
3179 | } | |
3180 | ||
3181 | if ( !codes-- ) | |
3182 | break; | |
3183 | ||
3184 | tracebuf[tracestuff++] = *++pCode; | |
3185 | } | |
3186 | } | |
3187 | #endif | |
3188 | ||
3189 | ||
3190 | MODULE_LICENSE("GPL"); | |
eb0e71c7 CS |
3191 | |
3192 | static struct pci_device_id ip2main_pci_tbl[] __devinitdata = { | |
3193 | { PCI_DEVICE(PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_IP2EX) }, | |
3194 | { } | |
3195 | }; | |
3196 | ||
3197 | MODULE_DEVICE_TABLE(pci, ip2main_pci_tbl); |