Merge tag 'kvm-s390-next-20141204' of git://git.kernel.org/pub/scm/linux/kernel/git...
[deliverable/linux.git] / drivers / char / pcmcia / synclink_cs.c
CommitLineData
1da177e4
LT
1/*
2 * linux/drivers/char/pcmcia/synclink_cs.c
3 *
a7482a2e 4 * $Id: synclink_cs.c,v 4.34 2005/09/08 13:20:54 paulkf Exp $
1da177e4
LT
5 *
6 * Device driver for Microgate SyncLink PC Card
7 * multiprotocol serial adapter.
8 *
9 * written by Paul Fulghum for Microgate Corporation
10 * paulkf@microgate.com
11 *
12 * Microgate and SyncLink are trademarks of Microgate Corporation
13 *
14 * This code is released under the GNU General Public License (GPL)
15 *
16 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
17 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
18 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
19 * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
20 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
21 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
22 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
24 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
25 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
26 * OF THE POSSIBILITY OF SUCH DAMAGE.
27 */
28
29#define VERSION(ver,rel,seq) (((ver)<<16) | ((rel)<<8) | (seq))
30#if defined(__i386__)
31# define BREAKPOINT() asm(" int $3");
32#else
33# define BREAKPOINT() { }
34#endif
35
36#define MAX_DEVICE_COUNT 4
37
1da177e4
LT
38#include <linux/module.h>
39#include <linux/errno.h>
40#include <linux/signal.h>
41#include <linux/sched.h>
42#include <linux/timer.h>
43#include <linux/time.h>
44#include <linux/interrupt.h>
1da177e4
LT
45#include <linux/tty.h>
46#include <linux/tty_flip.h>
47#include <linux/serial.h>
48#include <linux/major.h>
49#include <linux/string.h>
50#include <linux/fcntl.h>
51#include <linux/ptrace.h>
52#include <linux/ioport.h>
53#include <linux/mm.h>
87687144 54#include <linux/seq_file.h>
1da177e4
LT
55#include <linux/slab.h>
56#include <linux/netdevice.h>
57#include <linux/vmalloc.h>
58#include <linux/init.h>
1da177e4
LT
59#include <linux/delay.h>
60#include <linux/ioctl.h>
3dd1247f 61#include <linux/synclink.h>
1da177e4 62
1da177e4
LT
63#include <asm/io.h>
64#include <asm/irq.h>
65#include <asm/dma.h>
66#include <linux/bitops.h>
67#include <asm/types.h>
68#include <linux/termios.h>
69#include <linux/workqueue.h>
70#include <linux/hdlc.h>
71
1da177e4
LT
72#include <pcmcia/cistpl.h>
73#include <pcmcia/cisreg.h>
74#include <pcmcia/ds.h>
75
af69c7f9
PF
76#if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINK_CS_MODULE))
77#define SYNCLINK_GENERIC_HDLC 1
78#else
79#define SYNCLINK_GENERIC_HDLC 0
1da177e4
LT
80#endif
81
82#define GET_USER(error,value,addr) error = get_user(value,addr)
83#define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0
84#define PUT_USER(error,value,addr) error = put_user(value,addr)
85#define COPY_TO_USER(error,dest,src,size) error = copy_to_user(dest,src,size) ? -EFAULT : 0
86
87#include <asm/uaccess.h>
88
1da177e4
LT
89static MGSL_PARAMS default_params = {
90 MGSL_MODE_HDLC, /* unsigned long mode */
91 0, /* unsigned char loopback; */
92 HDLC_FLAG_UNDERRUN_ABORT15, /* unsigned short flags; */
93 HDLC_ENCODING_NRZI_SPACE, /* unsigned char encoding; */
94 0, /* unsigned long clock_speed; */
95 0xff, /* unsigned char addr_filter; */
96 HDLC_CRC_16_CCITT, /* unsigned short crc_type; */
97 HDLC_PREAMBLE_LENGTH_8BITS, /* unsigned char preamble_length; */
98 HDLC_PREAMBLE_PATTERN_NONE, /* unsigned char preamble; */
99 9600, /* unsigned long data_rate; */
100 8, /* unsigned char data_bits; */
101 1, /* unsigned char stop_bits; */
102 ASYNC_PARITY_NONE /* unsigned char parity; */
103};
104
3d553993 105typedef struct {
1da177e4
LT
106 int count;
107 unsigned char status;
108 char data[1];
109} RXBUF;
110
111/* The queue of BH actions to be performed */
112
113#define BH_RECEIVE 1
114#define BH_TRANSMIT 2
115#define BH_STATUS 4
116
117#define IO_PIN_SHUTDOWN_LIMIT 100
118
119#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
120
121struct _input_signal_events {
d12341f9 122 int ri_up;
1da177e4
LT
123 int ri_down;
124 int dsr_up;
125 int dsr_down;
126 int dcd_up;
127 int dcd_down;
128 int cts_up;
129 int cts_down;
130};
131
132
133/*
134 * Device instance data structure
135 */
d12341f9 136
1da177e4 137typedef struct _mgslpc_info {
eeb46134 138 struct tty_port port;
1da177e4
LT
139 void *if_ptr; /* General purpose pointer (used by SPPP) */
140 int magic;
1da177e4 141 int line;
d12341f9 142
1da177e4 143 struct mgsl_icount icount;
d12341f9 144
1da177e4
LT
145 int timeout;
146 int x_char; /* xon/xoff character */
1da177e4 147 unsigned char read_status_mask;
d12341f9 148 unsigned char ignore_status_mask;
1da177e4
LT
149
150 unsigned char *tx_buf;
151 int tx_put;
152 int tx_get;
153 int tx_count;
154
155 /* circular list of fixed length rx buffers */
156
157 unsigned char *rx_buf; /* memory allocated for all rx buffers */
158 int rx_buf_total_size; /* size of memory allocated for rx buffers */
159 int rx_put; /* index of next empty rx buffer */
160 int rx_get; /* index of next full rx buffer */
161 int rx_buf_size; /* size in bytes of single rx buffer */
162 int rx_buf_count; /* total number of rx buffers */
163 int rx_frame_count; /* number of full rx buffers */
d12341f9 164
1da177e4
LT
165 wait_queue_head_t status_event_wait_q;
166 wait_queue_head_t event_wait_q;
167 struct timer_list tx_timer; /* HDLC transmit timeout timer */
168 struct _mgslpc_info *next_device; /* device list link */
169
170 unsigned short imra_value;
171 unsigned short imrb_value;
172 unsigned char pim_value;
173
174 spinlock_t lock;
175 struct work_struct task; /* task structure for scheduling bh */
176
177 u32 max_frame_size;
178
179 u32 pending_bh;
180
0fab6de0
JP
181 bool bh_running;
182 bool bh_requested;
d12341f9 183
1da177e4
LT
184 int dcd_chkcount; /* check counts to prevent */
185 int cts_chkcount; /* too many IRQs if a signal */
186 int dsr_chkcount; /* is floating */
187 int ri_chkcount;
188
0fab6de0
JP
189 bool rx_enabled;
190 bool rx_overflow;
1da177e4 191
0fab6de0
JP
192 bool tx_enabled;
193 bool tx_active;
194 bool tx_aborting;
1da177e4
LT
195 u32 idle_mode;
196
197 int if_mode; /* serial interface selection (RS-232, v.35 etc) */
198
199 char device_name[25]; /* device instance name */
200
201 unsigned int io_base; /* base I/O address of adapter */
202 unsigned int irq_level;
d12341f9 203
1da177e4
LT
204 MGSL_PARAMS params; /* communications parameters */
205
206 unsigned char serial_signals; /* current serial signal states */
207
0fab6de0 208 bool irq_occurred; /* for diagnostics use */
1da177e4
LT
209 char testing_irq;
210 unsigned int init_error; /* startup error (DIAGS) */
211
a6b68a69 212 char *flag_buf;
0fab6de0 213 bool drop_rts_on_tx_done;
1da177e4
LT
214
215 struct _input_signal_events input_signal_events;
216
217 /* PCMCIA support */
fd238232 218 struct pcmcia_device *p_dev;
1da177e4
LT
219 int stop;
220
221 /* SPPP/Cisco HDLC device parts */
222 int netcount;
1da177e4
LT
223 spinlock_t netlock;
224
af69c7f9 225#if SYNCLINK_GENERIC_HDLC
1da177e4
LT
226 struct net_device *netdev;
227#endif
228
229} MGSLPC_INFO;
230
231#define MGSLPC_MAGIC 0x5402
232
233/*
234 * The size of the serial xmit buffer is 1 page, or 4096 bytes
235 */
236#define TXBUFSIZE 4096
237
d12341f9 238
1da177e4
LT
239#define CHA 0x00 /* channel A offset */
240#define CHB 0x40 /* channel B offset */
241
242/*
243 * FIXME: PPC has PVR defined in asm/reg.h. For now we just undef it.
244 */
245#undef PVR
246
247#define RXFIFO 0
248#define TXFIFO 0
249#define STAR 0x20
250#define CMDR 0x20
251#define RSTA 0x21
252#define PRE 0x21
253#define MODE 0x22
254#define TIMR 0x23
255#define XAD1 0x24
256#define XAD2 0x25
257#define RAH1 0x26
258#define RAH2 0x27
259#define DAFO 0x27
260#define RAL1 0x28
261#define RFC 0x28
262#define RHCR 0x29
263#define RAL2 0x29
264#define RBCL 0x2a
265#define XBCL 0x2a
266#define RBCH 0x2b
267#define XBCH 0x2b
268#define CCR0 0x2c
269#define CCR1 0x2d
270#define CCR2 0x2e
271#define CCR3 0x2f
272#define VSTR 0x34
273#define BGR 0x34
274#define RLCR 0x35
275#define AML 0x36
276#define AMH 0x37
277#define GIS 0x38
278#define IVA 0x38
279#define IPC 0x39
280#define ISR 0x3a
281#define IMR 0x3a
282#define PVR 0x3c
283#define PIS 0x3d
284#define PIM 0x3d
285#define PCR 0x3e
286#define CCR4 0x3f
d12341f9 287
1da177e4 288// IMR/ISR
d12341f9 289
1da177e4
LT
290#define IRQ_BREAK_ON BIT15 // rx break detected
291#define IRQ_DATAOVERRUN BIT14 // receive data overflow
292#define IRQ_ALLSENT BIT13 // all sent
293#define IRQ_UNDERRUN BIT12 // transmit data underrun
294#define IRQ_TIMER BIT11 // timer interrupt
295#define IRQ_CTS BIT10 // CTS status change
296#define IRQ_TXREPEAT BIT9 // tx message repeat
297#define IRQ_TXFIFO BIT8 // transmit pool ready
298#define IRQ_RXEOM BIT7 // receive message end
299#define IRQ_EXITHUNT BIT6 // receive frame start
300#define IRQ_RXTIME BIT6 // rx char timeout
301#define IRQ_DCD BIT2 // carrier detect status change
302#define IRQ_OVERRUN BIT1 // receive frame overflow
303#define IRQ_RXFIFO BIT0 // receive pool full
d12341f9 304
1da177e4 305// STAR
d12341f9 306
1da177e4
LT
307#define XFW BIT6 // transmit FIFO write enable
308#define CEC BIT2 // command executing
309#define CTS BIT1 // CTS state
d12341f9 310
1da177e4
LT
311#define PVR_DTR BIT0
312#define PVR_DSR BIT1
313#define PVR_RI BIT2
314#define PVR_AUTOCTS BIT3
315#define PVR_RS232 0x20 /* 0010b */
316#define PVR_V35 0xe0 /* 1110b */
317#define PVR_RS422 0x40 /* 0100b */
d12341f9
JG
318
319/* Register access functions */
320
1da177e4
LT
321#define write_reg(info, reg, val) outb((val),(info)->io_base + (reg))
322#define read_reg(info, reg) inb((info)->io_base + (reg))
323
d12341f9 324#define read_reg16(info, reg) inw((info)->io_base + (reg))
1da177e4 325#define write_reg16(info, reg, val) outw((val), (info)->io_base + (reg))
d12341f9 326
1da177e4 327#define set_reg_bits(info, reg, mask) \
3d553993 328 write_reg(info, (reg), \
d12341f9 329 (unsigned char) (read_reg(info, (reg)) | (mask)))
1da177e4 330#define clear_reg_bits(info, reg, mask) \
3d553993 331 write_reg(info, (reg), \
d12341f9 332 (unsigned char) (read_reg(info, (reg)) & ~(mask)))
1da177e4
LT
333/*
334 * interrupt enable/disable routines
d12341f9
JG
335 */
336static void irq_disable(MGSLPC_INFO *info, unsigned char channel, unsigned short mask)
1da177e4
LT
337{
338 if (channel == CHA) {
339 info->imra_value |= mask;
340 write_reg16(info, CHA + IMR, info->imra_value);
341 } else {
342 info->imrb_value |= mask;
343 write_reg16(info, CHB + IMR, info->imrb_value);
344 }
345}
d12341f9 346static void irq_enable(MGSLPC_INFO *info, unsigned char channel, unsigned short mask)
1da177e4
LT
347{
348 if (channel == CHA) {
349 info->imra_value &= ~mask;
350 write_reg16(info, CHA + IMR, info->imra_value);
351 } else {
352 info->imrb_value &= ~mask;
353 write_reg16(info, CHB + IMR, info->imrb_value);
354 }
355}
356
357#define port_irq_disable(info, mask) \
3d553993 358 { info->pim_value |= (mask); write_reg(info, PIM, info->pim_value); }
1da177e4
LT
359
360#define port_irq_enable(info, mask) \
3d553993 361 { info->pim_value &= ~(mask); write_reg(info, PIM, info->pim_value); }
1da177e4
LT
362
363static void rx_start(MGSLPC_INFO *info);
364static void rx_stop(MGSLPC_INFO *info);
365
eeb46134 366static void tx_start(MGSLPC_INFO *info, struct tty_struct *tty);
1da177e4
LT
367static void tx_stop(MGSLPC_INFO *info);
368static void tx_set_idle(MGSLPC_INFO *info);
369
370static void get_signals(MGSLPC_INFO *info);
371static void set_signals(MGSLPC_INFO *info);
372
373static void reset_device(MGSLPC_INFO *info);
374
375static void hdlc_mode(MGSLPC_INFO *info);
376static void async_mode(MGSLPC_INFO *info);
377
378static void tx_timeout(unsigned long context);
379
eeb46134 380static int carrier_raised(struct tty_port *port);
fcc8ac18 381static void dtr_rts(struct tty_port *port, int onoff);
1da177e4 382
af69c7f9 383#if SYNCLINK_GENERIC_HDLC
1da177e4
LT
384#define dev_to_port(D) (dev_to_hdlc(D)->priv)
385static void hdlcdev_tx_done(MGSLPC_INFO *info);
386static void hdlcdev_rx(MGSLPC_INFO *info, char *buf, int size);
387static int hdlcdev_init(MGSLPC_INFO *info);
388static void hdlcdev_exit(MGSLPC_INFO *info);
389#endif
390
391static void trace_block(MGSLPC_INFO *info,const char* data, int count, int xmit);
392
0fab6de0
JP
393static bool register_test(MGSLPC_INFO *info);
394static bool irq_test(MGSLPC_INFO *info);
1da177e4
LT
395static int adapter_test(MGSLPC_INFO *info);
396
397static int claim_resources(MGSLPC_INFO *info);
398static void release_resources(MGSLPC_INFO *info);
d34138d0 399static int mgslpc_add_device(MGSLPC_INFO *info);
1da177e4
LT
400static void mgslpc_remove_device(MGSLPC_INFO *info);
401
eeb46134 402static bool rx_get_frame(MGSLPC_INFO *info, struct tty_struct *tty);
1da177e4
LT
403static void rx_reset_buffers(MGSLPC_INFO *info);
404static int rx_alloc_buffers(MGSLPC_INFO *info);
405static void rx_free_buffers(MGSLPC_INFO *info);
406
7d12e780 407static irqreturn_t mgslpc_isr(int irq, void *dev_id);
1da177e4
LT
408
409/*
410 * Bottom half interrupt handlers
411 */
c4028958 412static void bh_handler(struct work_struct *work);
eeb46134 413static void bh_transmit(MGSLPC_INFO *info, struct tty_struct *tty);
1da177e4
LT
414static void bh_status(MGSLPC_INFO *info);
415
416/*
417 * ioctl handlers
418 */
60b33c13 419static int tiocmget(struct tty_struct *tty);
20b9d177
AC
420static int tiocmset(struct tty_struct *tty,
421 unsigned int set, unsigned int clear);
1da177e4
LT
422static int get_stats(MGSLPC_INFO *info, struct mgsl_icount __user *user_icount);
423static int get_params(MGSLPC_INFO *info, MGSL_PARAMS __user *user_params);
eeb46134 424static int set_params(MGSLPC_INFO *info, MGSL_PARAMS __user *new_params, struct tty_struct *tty);
1da177e4
LT
425static int get_txidle(MGSLPC_INFO *info, int __user *idle_mode);
426static int set_txidle(MGSLPC_INFO *info, int idle_mode);
eeb46134 427static int set_txenable(MGSLPC_INFO *info, int enable, struct tty_struct *tty);
1da177e4
LT
428static int tx_abort(MGSLPC_INFO *info);
429static int set_rxenable(MGSLPC_INFO *info, int enable);
430static int wait_events(MGSLPC_INFO *info, int __user *mask);
431
432static MGSLPC_INFO *mgslpc_device_list = NULL;
433static int mgslpc_device_count = 0;
434
435/*
436 * Set this param to non-zero to load eax with the
437 * .text section address and breakpoint on module load.
438 * This is useful for use with gdb and add-symbol-file command.
439 */
90ab5ee9 440static bool break_on_load=0;
1da177e4
LT
441
442/*
443 * Driver major number, defaults to zero to get auto
444 * assigned major number. May be forced as module parameter.
445 */
446static int ttymajor=0;
447
448static int debug_level = 0;
449static int maxframe[MAX_DEVICE_COUNT] = {0,};
1da177e4
LT
450
451module_param(break_on_load, bool, 0);
452module_param(ttymajor, int, 0);
453module_param(debug_level, int, 0);
454module_param_array(maxframe, int, NULL, 0);
1da177e4
LT
455
456MODULE_LICENSE("GPL");
457
458static char *driver_name = "SyncLink PC Card driver";
a7482a2e 459static char *driver_version = "$Revision: 4.34 $";
1da177e4
LT
460
461static struct tty_driver *serial_driver;
462
463/* number of characters left in xmit buffer before we ask for more */
464#define WAKEUP_CHARS 256
465
eeb46134 466static void mgslpc_change_params(MGSLPC_INFO *info, struct tty_struct *tty);
1da177e4
LT
467static void mgslpc_wait_until_sent(struct tty_struct *tty, int timeout);
468
469/* PCMCIA prototypes */
470
15b99ac1 471static int mgslpc_config(struct pcmcia_device *link);
1da177e4 472static void mgslpc_release(u_long arg);
cc3b4866 473static void mgslpc_detach(struct pcmcia_device *p_dev);
1da177e4 474
1da177e4
LT
475/*
476 * 1st function defined in .text section. Calling this function in
477 * init_module() followed by a breakpoint allows a remote debugger
478 * (gdb) to get the .text address for the add-symbol-file command.
479 * This allows remote debugging of dynamically loadable modules.
480 */
481static void* mgslpc_get_text_ptr(void)
482{
483 return mgslpc_get_text_ptr;
484}
485
486/**
487 * line discipline callback wrappers
488 *
489 * The wrappers maintain line discipline references
490 * while calling into the line discipline.
491 *
1da177e4
LT
492 * ldisc_receive_buf - pass receive data to line discipline
493 */
494
1da177e4
LT
495static void ldisc_receive_buf(struct tty_struct *tty,
496 const __u8 *data, char *flags, int count)
497{
498 struct tty_ldisc *ld;
499 if (!tty)
500 return;
501 ld = tty_ldisc_ref(tty);
502 if (ld) {
a352def2
AC
503 if (ld->ops->receive_buf)
504 ld->ops->receive_buf(tty, data, flags, count);
1da177e4
LT
505 tty_ldisc_deref(ld);
506 }
507}
508
eeb46134
AC
509static const struct tty_port_operations mgslpc_port_ops = {
510 .carrier_raised = carrier_raised,
fcc8ac18 511 .dtr_rts = dtr_rts
eeb46134
AC
512};
513
15b99ac1 514static int mgslpc_probe(struct pcmcia_device *link)
1da177e4 515{
3d553993
AK
516 MGSLPC_INFO *info;
517 int ret;
518
519 if (debug_level >= DEBUG_LEVEL_INFO)
520 printk("mgslpc_attach\n");
521
522 info = kzalloc(sizeof(MGSLPC_INFO), GFP_KERNEL);
523 if (!info) {
524 printk("Error can't allocate device instance data\n");
525 return -ENOMEM;
526 }
527
528 info->magic = MGSLPC_MAGIC;
529 tty_port_init(&info->port);
530 info->port.ops = &mgslpc_port_ops;
531 INIT_WORK(&info->task, bh_handler);
532 info->max_frame_size = 4096;
533 info->port.close_delay = 5*HZ/10;
534 info->port.closing_wait = 30*HZ;
535 init_waitqueue_head(&info->status_event_wait_q);
536 init_waitqueue_head(&info->event_wait_q);
537 spin_lock_init(&info->lock);
538 spin_lock_init(&info->netlock);
539 memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
540 info->idle_mode = HDLC_TXIDLE_FLAGS;
541 info->imra_value = 0xffff;
542 info->imrb_value = 0xffff;
543 info->pim_value = 0xff;
544
545 info->p_dev = link;
546 link->priv = info;
547
548 /* Initialize the struct pcmcia_device structure */
549
550 ret = mgslpc_config(link);
551 if (ret != 0)
552 goto failed;
553
554 ret = mgslpc_add_device(info);
555 if (ret != 0)
556 goto failed_release;
557
558 return 0;
d34138d0
AK
559
560failed_release:
3d553993 561 mgslpc_release((u_long)link);
d34138d0 562failed:
3d553993
AK
563 tty_port_destroy(&info->port);
564 kfree(info);
565 return ret;
1da177e4
LT
566}
567
568/* Card has been inserted.
569 */
570
00990e7c 571static int mgslpc_ioprobe(struct pcmcia_device *p_dev, void *priv_data)
aaa8cfda 572{
90abdc3b 573 return pcmcia_request_io(p_dev);
aaa8cfda
DB
574}
575
15b99ac1 576static int mgslpc_config(struct pcmcia_device *link)
1da177e4 577{
3d553993
AK
578 MGSLPC_INFO *info = link->priv;
579 int ret;
d12341f9 580
3d553993
AK
581 if (debug_level >= DEBUG_LEVEL_INFO)
582 printk("mgslpc_config(0x%p)\n", link);
1da177e4 583
3d553993 584 link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
00990e7c 585
3d553993
AK
586 ret = pcmcia_loop_config(link, mgslpc_ioprobe, NULL);
587 if (ret != 0)
588 goto failed;
1da177e4 589
3d553993
AK
590 link->config_index = 8;
591 link->config_regs = PRESENT_OPTION;
d12341f9 592
3d553993
AK
593 ret = pcmcia_request_irq(link, mgslpc_isr);
594 if (ret)
595 goto failed;
596 ret = pcmcia_enable_device(link);
597 if (ret)
598 goto failed;
1da177e4 599
3d553993
AK
600 info->io_base = link->resource[0]->start;
601 info->irq_level = link->irq;
602 return 0;
1da177e4 603
cbf624f0 604failed:
3d553993
AK
605 mgslpc_release((u_long)link);
606 return -ENODEV;
1da177e4
LT
607}
608
609/* Card has been removed.
610 * Unregister device and release PCMCIA configuration.
611 * If device is open, postpone until it is closed.
612 */
613static void mgslpc_release(u_long arg)
614{
e2d40963 615 struct pcmcia_device *link = (struct pcmcia_device *)arg;
1da177e4 616
e2d40963
DB
617 if (debug_level >= DEBUG_LEVEL_INFO)
618 printk("mgslpc_release(0x%p)\n", link);
1da177e4 619
e2d40963 620 pcmcia_disable_device(link);
1da177e4
LT
621}
622
fba395ee 623static void mgslpc_detach(struct pcmcia_device *link)
1da177e4 624{
e2d40963
DB
625 if (debug_level >= DEBUG_LEVEL_INFO)
626 printk("mgslpc_detach(0x%p)\n", link);
cc3b4866 627
e2d40963
DB
628 ((MGSLPC_INFO *)link->priv)->stop = 1;
629 mgslpc_release((u_long)link);
1da177e4 630
e2d40963 631 mgslpc_remove_device((MGSLPC_INFO *)link->priv);
1da177e4
LT
632}
633
fba395ee 634static int mgslpc_suspend(struct pcmcia_device *link)
98e4c28b 635{
98e4c28b
DB
636 MGSLPC_INFO *info = link->priv;
637
98e4c28b 638 info->stop = 1;
98e4c28b
DB
639
640 return 0;
641}
642
fba395ee 643static int mgslpc_resume(struct pcmcia_device *link)
98e4c28b 644{
98e4c28b
DB
645 MGSLPC_INFO *info = link->priv;
646
98e4c28b
DB
647 info->stop = 0;
648
649 return 0;
650}
651
652
0fab6de0 653static inline bool mgslpc_paranoia_check(MGSLPC_INFO *info,
1da177e4
LT
654 char *name, const char *routine)
655{
656#ifdef MGSLPC_PARANOIA_CHECK
657 static const char *badmagic =
658 "Warning: bad magic number for mgsl struct (%s) in %s\n";
659 static const char *badinfo =
660 "Warning: null mgslpc_info for (%s) in %s\n";
661
662 if (!info) {
663 printk(badinfo, name, routine);
0fab6de0 664 return true;
1da177e4
LT
665 }
666 if (info->magic != MGSLPC_MAGIC) {
667 printk(badmagic, name, routine);
0fab6de0 668 return true;
1da177e4
LT
669 }
670#else
671 if (!info)
0fab6de0 672 return true;
1da177e4 673#endif
0fab6de0 674 return false;
1da177e4
LT
675}
676
677
678#define CMD_RXFIFO BIT7 // release current rx FIFO
679#define CMD_RXRESET BIT6 // receiver reset
680#define CMD_RXFIFO_READ BIT5
681#define CMD_START_TIMER BIT4
682#define CMD_TXFIFO BIT3 // release current tx FIFO
683#define CMD_TXEOM BIT1 // transmit end message
684#define CMD_TXRESET BIT0 // transmit reset
685
0fab6de0 686static bool wait_command_complete(MGSLPC_INFO *info, unsigned char channel)
1da177e4
LT
687{
688 int i = 0;
d12341f9 689 /* wait for command completion */
1da177e4
LT
690 while (read_reg(info, (unsigned char)(channel+STAR)) & BIT2) {
691 udelay(1);
692 if (i++ == 1000)
0fab6de0 693 return false;
1da177e4 694 }
0fab6de0 695 return true;
1da177e4
LT
696}
697
d12341f9 698static void issue_command(MGSLPC_INFO *info, unsigned char channel, unsigned char cmd)
1da177e4
LT
699{
700 wait_command_complete(info, channel);
701 write_reg(info, (unsigned char) (channel + CMDR), cmd);
702}
703
704static void tx_pause(struct tty_struct *tty)
705{
706 MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
707 unsigned long flags;
d12341f9 708
1da177e4
LT
709 if (mgslpc_paranoia_check(info, tty->name, "tx_pause"))
710 return;
711 if (debug_level >= DEBUG_LEVEL_INFO)
3d553993 712 printk("tx_pause(%s)\n", info->device_name);
d12341f9 713
3d553993 714 spin_lock_irqsave(&info->lock, flags);
1da177e4 715 if (info->tx_enabled)
3d553993
AK
716 tx_stop(info);
717 spin_unlock_irqrestore(&info->lock, flags);
1da177e4
LT
718}
719
720static void tx_release(struct tty_struct *tty)
721{
722 MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
723 unsigned long flags;
d12341f9 724
1da177e4
LT
725 if (mgslpc_paranoia_check(info, tty->name, "tx_release"))
726 return;
727 if (debug_level >= DEBUG_LEVEL_INFO)
3d553993 728 printk("tx_release(%s)\n", info->device_name);
d12341f9 729
3d553993 730 spin_lock_irqsave(&info->lock, flags);
1da177e4 731 if (!info->tx_enabled)
3d553993
AK
732 tx_start(info, tty);
733 spin_unlock_irqrestore(&info->lock, flags);
1da177e4
LT
734}
735
736/* Return next bottom half action to perform.
737 * or 0 if nothing to do.
738 */
739static int bh_action(MGSLPC_INFO *info)
740{
741 unsigned long flags;
742 int rc = 0;
d12341f9 743
3d553993 744 spin_lock_irqsave(&info->lock, flags);
1da177e4
LT
745
746 if (info->pending_bh & BH_RECEIVE) {
747 info->pending_bh &= ~BH_RECEIVE;
748 rc = BH_RECEIVE;
749 } else if (info->pending_bh & BH_TRANSMIT) {
750 info->pending_bh &= ~BH_TRANSMIT;
751 rc = BH_TRANSMIT;
752 } else if (info->pending_bh & BH_STATUS) {
753 info->pending_bh &= ~BH_STATUS;
754 rc = BH_STATUS;
755 }
756
757 if (!rc) {
758 /* Mark BH routine as complete */
0fab6de0
JP
759 info->bh_running = false;
760 info->bh_requested = false;
1da177e4 761 }
d12341f9 762
3d553993 763 spin_unlock_irqrestore(&info->lock, flags);
d12341f9 764
1da177e4
LT
765 return rc;
766}
767
c4028958 768static void bh_handler(struct work_struct *work)
1da177e4 769{
c4028958 770 MGSLPC_INFO *info = container_of(work, MGSLPC_INFO, task);
eeb46134 771 struct tty_struct *tty;
1da177e4
LT
772 int action;
773
1da177e4 774 if (debug_level >= DEBUG_LEVEL_BH)
3d553993 775 printk("%s(%d):bh_handler(%s) entry\n",
1da177e4 776 __FILE__,__LINE__,info->device_name);
d12341f9 777
0fab6de0 778 info->bh_running = true;
eeb46134 779 tty = tty_port_tty_get(&info->port);
1da177e4
LT
780
781 while((action = bh_action(info)) != 0) {
d12341f9 782
1da177e4 783 /* Process work item */
3d553993
AK
784 if (debug_level >= DEBUG_LEVEL_BH)
785 printk("%s(%d):bh_handler() work item action=%d\n",
1da177e4
LT
786 __FILE__,__LINE__,action);
787
788 switch (action) {
d12341f9 789
1da177e4 790 case BH_RECEIVE:
eeb46134 791 while(rx_get_frame(info, tty));
1da177e4
LT
792 break;
793 case BH_TRANSMIT:
eeb46134 794 bh_transmit(info, tty);
1da177e4
LT
795 break;
796 case BH_STATUS:
797 bh_status(info);
798 break;
799 default:
800 /* unknown work item ID */
801 printk("Unknown work item ID=%08X!\n", action);
802 break;
803 }
804 }
805
eeb46134 806 tty_kref_put(tty);
1da177e4 807 if (debug_level >= DEBUG_LEVEL_BH)
3d553993 808 printk("%s(%d):bh_handler(%s) exit\n",
1da177e4
LT
809 __FILE__,__LINE__,info->device_name);
810}
811
eeb46134 812static void bh_transmit(MGSLPC_INFO *info, struct tty_struct *tty)
1da177e4 813{
1da177e4
LT
814 if (debug_level >= DEBUG_LEVEL_BH)
815 printk("bh_transmit() entry on %s\n", info->device_name);
816
b963a844 817 if (tty)
1da177e4 818 tty_wakeup(tty);
1da177e4
LT
819}
820
cdaad343 821static void bh_status(MGSLPC_INFO *info)
1da177e4
LT
822{
823 info->ri_chkcount = 0;
824 info->dsr_chkcount = 0;
825 info->dcd_chkcount = 0;
826 info->cts_chkcount = 0;
827}
828
d12341f9 829/* eom: non-zero = end of frame */
1da177e4
LT
830static void rx_ready_hdlc(MGSLPC_INFO *info, int eom)
831{
832 unsigned char data[2];
833 unsigned char fifo_count, read_count, i;
834 RXBUF *buf = (RXBUF*)(info->rx_buf + (info->rx_put * info->rx_buf_size));
835
836 if (debug_level >= DEBUG_LEVEL_ISR)
3d553993 837 printk("%s(%d):rx_ready_hdlc(eom=%d)\n", __FILE__, __LINE__, eom);
d12341f9 838
1da177e4
LT
839 if (!info->rx_enabled)
840 return;
841
842 if (info->rx_frame_count >= info->rx_buf_count) {
843 /* no more free buffers */
844 issue_command(info, CHA, CMD_RXRESET);
845 info->pending_bh |= BH_RECEIVE;
0fab6de0 846 info->rx_overflow = true;
1da177e4
LT
847 info->icount.buf_overrun++;
848 return;
849 }
850
851 if (eom) {
d12341f9 852 /* end of frame, get FIFO count from RBCL register */
3d553993
AK
853 fifo_count = (unsigned char)(read_reg(info, CHA+RBCL) & 0x1f);
854 if (fifo_count == 0)
1da177e4
LT
855 fifo_count = 32;
856 } else
857 fifo_count = 32;
d12341f9 858
1da177e4
LT
859 do {
860 if (fifo_count == 1) {
861 read_count = 1;
862 data[0] = read_reg(info, CHA + RXFIFO);
863 } else {
864 read_count = 2;
865 *((unsigned short *) data) = read_reg16(info, CHA + RXFIFO);
866 }
867 fifo_count -= read_count;
868 if (!fifo_count && eom)
869 buf->status = data[--read_count];
870
871 for (i = 0; i < read_count; i++) {
872 if (buf->count >= info->max_frame_size) {
873 /* frame too large, reset receiver and reset current buffer */
874 issue_command(info, CHA, CMD_RXRESET);
875 buf->count = 0;
876 return;
877 }
878 *(buf->data + buf->count) = data[i];
879 buf->count++;
880 }
881 } while (fifo_count);
882
883 if (eom) {
884 info->pending_bh |= BH_RECEIVE;
885 info->rx_frame_count++;
886 info->rx_put++;
887 if (info->rx_put >= info->rx_buf_count)
888 info->rx_put = 0;
889 }
890 issue_command(info, CHA, CMD_RXFIFO);
891}
892
2e124b4a 893static void rx_ready_async(MGSLPC_INFO *info, int tcd)
1da177e4 894{
227434f8 895 struct tty_port *port = &info->port;
33f0f88f 896 unsigned char data, status, flag;
1da177e4 897 int fifo_count;
33f0f88f 898 int work = 0;
3d553993 899 struct mgsl_icount *icount = &info->icount;
1da177e4
LT
900
901 if (tcd) {
d12341f9 902 /* early termination, get FIFO count from RBCL register */
1da177e4
LT
903 fifo_count = (unsigned char)(read_reg(info, CHA+RBCL) & 0x1f);
904
905 /* Zero fifo count could mean 0 or 32 bytes available.
906 * If BIT5 of STAR is set then at least 1 byte is available.
907 */
908 if (!fifo_count && (read_reg(info,CHA+STAR) & BIT5))
909 fifo_count = 32;
910 } else
911 fifo_count = 32;
33f0f88f 912
227434f8 913 tty_buffer_request_room(port, fifo_count);
d12341f9 914 /* Flush received async data to receive data buffer. */
1da177e4
LT
915 while (fifo_count) {
916 data = read_reg(info, CHA + RXFIFO);
917 status = read_reg(info, CHA + RXFIFO);
918 fifo_count -= 2;
919
1da177e4 920 icount->rx++;
33f0f88f 921 flag = TTY_NORMAL;
1da177e4
LT
922
923 // if no frameing/crc error then save data
924 // BIT7:parity error
925 // BIT6:framing error
926
927 if (status & (BIT7 + BIT6)) {
d12341f9 928 if (status & BIT7)
1da177e4
LT
929 icount->parity++;
930 else
931 icount->frame++;
932
933 /* discard char if tty control flags say so */
934 if (status & info->ignore_status_mask)
935 continue;
d12341f9 936
1da177e4
LT
937 status &= info->read_status_mask;
938
939 if (status & BIT7)
33f0f88f 940 flag = TTY_PARITY;
1da177e4 941 else if (status & BIT6)
33f0f88f 942 flag = TTY_FRAME;
1da177e4 943 }
92a19f9c 944 work += tty_insert_flip_char(port, data, flag);
1da177e4
LT
945 }
946 issue_command(info, CHA, CMD_RXFIFO);
947
948 if (debug_level >= DEBUG_LEVEL_ISR) {
33f0f88f
AC
949 printk("%s(%d):rx_ready_async",
950 __FILE__,__LINE__);
1da177e4
LT
951 printk("%s(%d):rx=%d brk=%d parity=%d frame=%d overrun=%d\n",
952 __FILE__,__LINE__,icount->rx,icount->brk,
953 icount->parity,icount->frame,icount->overrun);
954 }
d12341f9 955
33f0f88f 956 if (work)
2e124b4a 957 tty_flip_buffer_push(port);
1da177e4
LT
958}
959
960
eeb46134 961static void tx_done(MGSLPC_INFO *info, struct tty_struct *tty)
1da177e4
LT
962{
963 if (!info->tx_active)
964 return;
d12341f9 965
0fab6de0
JP
966 info->tx_active = false;
967 info->tx_aborting = false;
1da177e4
LT
968
969 if (info->params.mode == MGSL_MODE_ASYNC)
970 return;
971
972 info->tx_count = info->tx_put = info->tx_get = 0;
d12341f9
JG
973 del_timer(&info->tx_timer);
974
1da177e4
LT
975 if (info->drop_rts_on_tx_done) {
976 get_signals(info);
977 if (info->serial_signals & SerialSignal_RTS) {
978 info->serial_signals &= ~SerialSignal_RTS;
979 set_signals(info);
980 }
0fab6de0 981 info->drop_rts_on_tx_done = false;
1da177e4
LT
982 }
983
af69c7f9 984#if SYNCLINK_GENERIC_HDLC
1da177e4
LT
985 if (info->netcount)
986 hdlcdev_tx_done(info);
d12341f9 987 else
1da177e4
LT
988#endif
989 {
221b7b57 990 if (tty && (tty->stopped || tty->hw_stopped)) {
1da177e4
LT
991 tx_stop(info);
992 return;
993 }
994 info->pending_bh |= BH_TRANSMIT;
995 }
996}
997
eeb46134 998static void tx_ready(MGSLPC_INFO *info, struct tty_struct *tty)
1da177e4
LT
999{
1000 unsigned char fifo_count = 32;
1001 int c;
1002
1003 if (debug_level >= DEBUG_LEVEL_ISR)
3d553993 1004 printk("%s(%d):tx_ready(%s)\n", __FILE__, __LINE__, info->device_name);
1da177e4
LT
1005
1006 if (info->params.mode == MGSL_MODE_HDLC) {
1007 if (!info->tx_active)
1008 return;
1009 } else {
221b7b57 1010 if (tty && (tty->stopped || tty->hw_stopped)) {
1da177e4
LT
1011 tx_stop(info);
1012 return;
1013 }
1014 if (!info->tx_count)
0fab6de0 1015 info->tx_active = false;
1da177e4
LT
1016 }
1017
1018 if (!info->tx_count)
1019 return;
1020
1021 while (info->tx_count && fifo_count) {
1022 c = min(2, min_t(int, fifo_count, min(info->tx_count, TXBUFSIZE - info->tx_get)));
d12341f9 1023
1da177e4
LT
1024 if (c == 1) {
1025 write_reg(info, CHA + TXFIFO, *(info->tx_buf + info->tx_get));
1026 } else {
1027 write_reg16(info, CHA + TXFIFO,
1028 *((unsigned short*)(info->tx_buf + info->tx_get)));
1029 }
1030 info->tx_count -= c;
1031 info->tx_get = (info->tx_get + c) & (TXBUFSIZE - 1);
1032 fifo_count -= c;
1033 }
1034
1035 if (info->params.mode == MGSL_MODE_ASYNC) {
1036 if (info->tx_count < WAKEUP_CHARS)
1037 info->pending_bh |= BH_TRANSMIT;
1038 issue_command(info, CHA, CMD_TXFIFO);
1039 } else {
1040 if (info->tx_count)
1041 issue_command(info, CHA, CMD_TXFIFO);
1042 else
1043 issue_command(info, CHA, CMD_TXFIFO + CMD_TXEOM);
1044 }
1045}
1046
eeb46134 1047static void cts_change(MGSLPC_INFO *info, struct tty_struct *tty)
1da177e4
LT
1048{
1049 get_signals(info);
1050 if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
1051 irq_disable(info, CHB, IRQ_CTS);
1052 info->icount.cts++;
1053 if (info->serial_signals & SerialSignal_CTS)
1054 info->input_signal_events.cts_up++;
1055 else
1056 info->input_signal_events.cts_down++;
1057 wake_up_interruptible(&info->status_event_wait_q);
1058 wake_up_interruptible(&info->event_wait_q);
1059
3498d13b 1060 if (tty && tty_port_cts_enabled(&info->port)) {
eeb46134 1061 if (tty->hw_stopped) {
1da177e4
LT
1062 if (info->serial_signals & SerialSignal_CTS) {
1063 if (debug_level >= DEBUG_LEVEL_ISR)
1064 printk("CTS tx start...");
221b7b57 1065 tty->hw_stopped = 0;
eeb46134 1066 tx_start(info, tty);
1da177e4
LT
1067 info->pending_bh |= BH_TRANSMIT;
1068 return;
1069 }
1070 } else {
1071 if (!(info->serial_signals & SerialSignal_CTS)) {
1072 if (debug_level >= DEBUG_LEVEL_ISR)
1073 printk("CTS tx stop...");
221b7b57 1074 tty->hw_stopped = 1;
1da177e4
LT
1075 tx_stop(info);
1076 }
1077 }
1078 }
1079 info->pending_bh |= BH_STATUS;
1080}
1081
eeb46134 1082static void dcd_change(MGSLPC_INFO *info, struct tty_struct *tty)
1da177e4
LT
1083{
1084 get_signals(info);
1085 if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
1086 irq_disable(info, CHB, IRQ_DCD);
1087 info->icount.dcd++;
1088 if (info->serial_signals & SerialSignal_DCD) {
1089 info->input_signal_events.dcd_up++;
1090 }
1091 else
1092 info->input_signal_events.dcd_down++;
af69c7f9 1093#if SYNCLINK_GENERIC_HDLC
fbeff3c1
KH
1094 if (info->netcount) {
1095 if (info->serial_signals & SerialSignal_DCD)
1096 netif_carrier_on(info->netdev);
1097 else
1098 netif_carrier_off(info->netdev);
1099 }
1da177e4
LT
1100#endif
1101 wake_up_interruptible(&info->status_event_wait_q);
1102 wake_up_interruptible(&info->event_wait_q);
1103
eeb46134 1104 if (info->port.flags & ASYNC_CHECK_CD) {
1da177e4
LT
1105 if (debug_level >= DEBUG_LEVEL_ISR)
1106 printk("%s CD now %s...", info->device_name,
1107 (info->serial_signals & SerialSignal_DCD) ? "on" : "off");
1108 if (info->serial_signals & SerialSignal_DCD)
eeb46134 1109 wake_up_interruptible(&info->port.open_wait);
1da177e4
LT
1110 else {
1111 if (debug_level >= DEBUG_LEVEL_ISR)
1112 printk("doing serial hangup...");
eeb46134
AC
1113 if (tty)
1114 tty_hangup(tty);
1da177e4
LT
1115 }
1116 }
1117 info->pending_bh |= BH_STATUS;
1118}
1119
1120static void dsr_change(MGSLPC_INFO *info)
1121{
1122 get_signals(info);
1123 if ((info->dsr_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
1124 port_irq_disable(info, PVR_DSR);
1125 info->icount.dsr++;
1126 if (info->serial_signals & SerialSignal_DSR)
1127 info->input_signal_events.dsr_up++;
1128 else
1129 info->input_signal_events.dsr_down++;
1130 wake_up_interruptible(&info->status_event_wait_q);
1131 wake_up_interruptible(&info->event_wait_q);
1132 info->pending_bh |= BH_STATUS;
1133}
1134
1135static void ri_change(MGSLPC_INFO *info)
1136{
1137 get_signals(info);
1138 if ((info->ri_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
1139 port_irq_disable(info, PVR_RI);
1140 info->icount.rng++;
1141 if (info->serial_signals & SerialSignal_RI)
1142 info->input_signal_events.ri_up++;
1143 else
1144 info->input_signal_events.ri_down++;
1145 wake_up_interruptible(&info->status_event_wait_q);
1146 wake_up_interruptible(&info->event_wait_q);
1147 info->pending_bh |= BH_STATUS;
1148}
1149
1150/* Interrupt service routine entry point.
d12341f9 1151 *
1da177e4 1152 * Arguments:
d12341f9 1153 *
1da177e4
LT
1154 * irq interrupt number that caused interrupt
1155 * dev_id device ID supplied during interrupt registration
1da177e4 1156 */
a6f97b29 1157static irqreturn_t mgslpc_isr(int dummy, void *dev_id)
1da177e4 1158{
a6f97b29 1159 MGSLPC_INFO *info = dev_id;
eeb46134 1160 struct tty_struct *tty;
1da177e4
LT
1161 unsigned short isr;
1162 unsigned char gis, pis;
1163 int count=0;
1164
d12341f9 1165 if (debug_level >= DEBUG_LEVEL_ISR)
a6f97b29 1166 printk("mgslpc_isr(%d) entry.\n", info->irq_level);
d12341f9 1167
e2d40963 1168 if (!(info->p_dev->_locked))
1da177e4
LT
1169 return IRQ_HANDLED;
1170
eeb46134
AC
1171 tty = tty_port_tty_get(&info->port);
1172
1da177e4
LT
1173 spin_lock(&info->lock);
1174
1175 while ((gis = read_reg(info, CHA + GIS))) {
d12341f9 1176 if (debug_level >= DEBUG_LEVEL_ISR)
1da177e4
LT
1177 printk("mgslpc_isr %s gis=%04X\n", info->device_name,gis);
1178
1179 if ((gis & 0x70) || count > 1000) {
1180 printk("synclink_cs:hardware failed or ejected\n");
1181 break;
1182 }
1183 count++;
1184
ecda040f 1185 if (gis & (BIT1 | BIT0)) {
1da177e4
LT
1186 isr = read_reg16(info, CHB + ISR);
1187 if (isr & IRQ_DCD)
eeb46134 1188 dcd_change(info, tty);
1da177e4 1189 if (isr & IRQ_CTS)
eeb46134 1190 cts_change(info, tty);
1da177e4 1191 }
ecda040f 1192 if (gis & (BIT3 | BIT2))
1da177e4
LT
1193 {
1194 isr = read_reg16(info, CHA + ISR);
1195 if (isr & IRQ_TIMER) {
0fab6de0 1196 info->irq_occurred = true;
1da177e4
LT
1197 irq_disable(info, CHA, IRQ_TIMER);
1198 }
1199
d12341f9 1200 /* receive IRQs */
1da177e4
LT
1201 if (isr & IRQ_EXITHUNT) {
1202 info->icount.exithunt++;
1203 wake_up_interruptible(&info->event_wait_q);
1204 }
1205 if (isr & IRQ_BREAK_ON) {
1206 info->icount.brk++;
eeb46134
AC
1207 if (info->port.flags & ASYNC_SAK)
1208 do_SAK(tty);
1da177e4
LT
1209 }
1210 if (isr & IRQ_RXTIME) {
1211 issue_command(info, CHA, CMD_RXFIFO_READ);
1212 }
ecda040f 1213 if (isr & (IRQ_RXEOM | IRQ_RXFIFO)) {
1da177e4 1214 if (info->params.mode == MGSL_MODE_HDLC)
d12341f9 1215 rx_ready_hdlc(info, isr & IRQ_RXEOM);
1da177e4 1216 else
2e124b4a 1217 rx_ready_async(info, isr & IRQ_RXEOM);
1da177e4
LT
1218 }
1219
d12341f9 1220 /* transmit IRQs */
1da177e4
LT
1221 if (isr & IRQ_UNDERRUN) {
1222 if (info->tx_aborting)
1223 info->icount.txabort++;
1224 else
1225 info->icount.txunder++;
eeb46134 1226 tx_done(info, tty);
1da177e4
LT
1227 }
1228 else if (isr & IRQ_ALLSENT) {
1229 info->icount.txok++;
eeb46134 1230 tx_done(info, tty);
1da177e4
LT
1231 }
1232 else if (isr & IRQ_TXFIFO)
eeb46134 1233 tx_ready(info, tty);
1da177e4
LT
1234 }
1235 if (gis & BIT7) {
1236 pis = read_reg(info, CHA + PIS);
1237 if (pis & BIT1)
1238 dsr_change(info);
1239 if (pis & BIT2)
1240 ri_change(info);
1241 }
1242 }
d12341f9
JG
1243
1244 /* Request bottom half processing if there's something
1da177e4
LT
1245 * for it to do and the bh is not already running
1246 */
1247
1248 if (info->pending_bh && !info->bh_running && !info->bh_requested) {
3d553993 1249 if (debug_level >= DEBUG_LEVEL_ISR)
1da177e4
LT
1250 printk("%s(%d):%s queueing bh task.\n",
1251 __FILE__,__LINE__,info->device_name);
1252 schedule_work(&info->task);
0fab6de0 1253 info->bh_requested = true;
1da177e4
LT
1254 }
1255
1256 spin_unlock(&info->lock);
eeb46134 1257 tty_kref_put(tty);
d12341f9
JG
1258
1259 if (debug_level >= DEBUG_LEVEL_ISR)
1da177e4 1260 printk("%s(%d):mgslpc_isr(%d)exit.\n",
a6f97b29 1261 __FILE__, __LINE__, info->irq_level);
1da177e4
LT
1262
1263 return IRQ_HANDLED;
1264}
1265
1266/* Initialize and start device.
1267 */
eeb46134 1268static int startup(MGSLPC_INFO * info, struct tty_struct *tty)
1da177e4
LT
1269{
1270 int retval = 0;
d12341f9 1271
1da177e4 1272 if (debug_level >= DEBUG_LEVEL_INFO)
3d553993 1273 printk("%s(%d):startup(%s)\n", __FILE__, __LINE__, info->device_name);
d12341f9 1274
eeb46134 1275 if (info->port.flags & ASYNC_INITIALIZED)
1da177e4 1276 return 0;
d12341f9 1277
1da177e4
LT
1278 if (!info->tx_buf) {
1279 /* allocate a page of memory for a transmit buffer */
1280 info->tx_buf = (unsigned char *)get_zeroed_page(GFP_KERNEL);
1281 if (!info->tx_buf) {
1282 printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n",
3d553993 1283 __FILE__, __LINE__, info->device_name);
1da177e4
LT
1284 return -ENOMEM;
1285 }
1286 }
1287
1288 info->pending_bh = 0;
d12341f9 1289
a7482a2e
PF
1290 memset(&info->icount, 0, sizeof(info->icount));
1291
40565f19 1292 setup_timer(&info->tx_timer, tx_timeout, (unsigned long)info);
1da177e4
LT
1293
1294 /* Allocate and claim adapter resources */
1295 retval = claim_resources(info);
d12341f9 1296
25985edc 1297 /* perform existence check and diagnostics */
3d553993 1298 if (!retval)
1da177e4 1299 retval = adapter_test(info);
d12341f9 1300
3d553993
AK
1301 if (retval) {
1302 if (capable(CAP_SYS_ADMIN) && tty)
eeb46134 1303 set_bit(TTY_IO_ERROR, &tty->flags);
1da177e4 1304 release_resources(info);
3d553993
AK
1305 return retval;
1306 }
1da177e4
LT
1307
1308 /* program hardware for current parameters */
eeb46134 1309 mgslpc_change_params(info, tty);
d12341f9 1310
eeb46134
AC
1311 if (tty)
1312 clear_bit(TTY_IO_ERROR, &tty->flags);
1da177e4 1313
eeb46134 1314 info->port.flags |= ASYNC_INITIALIZED;
d12341f9 1315
1da177e4
LT
1316 return 0;
1317}
1318
1319/* Called by mgslpc_close() and mgslpc_hangup() to shutdown hardware
1320 */
eeb46134 1321static void shutdown(MGSLPC_INFO * info, struct tty_struct *tty)
1da177e4
LT
1322{
1323 unsigned long flags;
d12341f9 1324
eeb46134 1325 if (!(info->port.flags & ASYNC_INITIALIZED))
1da177e4
LT
1326 return;
1327
1328 if (debug_level >= DEBUG_LEVEL_INFO)
1329 printk("%s(%d):mgslpc_shutdown(%s)\n",
3d553993 1330 __FILE__, __LINE__, info->device_name);
1da177e4
LT
1331
1332 /* clear status wait queue because status changes */
1333 /* can't happen after shutting down the hardware */
1334 wake_up_interruptible(&info->status_event_wait_q);
1335 wake_up_interruptible(&info->event_wait_q);
1336
40565f19 1337 del_timer_sync(&info->tx_timer);
1da177e4
LT
1338
1339 if (info->tx_buf) {
1340 free_page((unsigned long) info->tx_buf);
1341 info->tx_buf = NULL;
1342 }
1343
3d553993 1344 spin_lock_irqsave(&info->lock, flags);
1da177e4
LT
1345
1346 rx_stop(info);
1347 tx_stop(info);
1348
1349 /* TODO:disable interrupts instead of reset to preserve signal states */
1350 reset_device(info);
d12341f9 1351
3d553993 1352 if (!tty || tty->termios.c_cflag & HUPCL) {
9fe8074b 1353 info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
1da177e4
LT
1354 set_signals(info);
1355 }
d12341f9 1356
3d553993 1357 spin_unlock_irqrestore(&info->lock, flags);
1da177e4 1358
d12341f9
JG
1359 release_resources(info);
1360
eeb46134
AC
1361 if (tty)
1362 set_bit(TTY_IO_ERROR, &tty->flags);
1da177e4 1363
eeb46134 1364 info->port.flags &= ~ASYNC_INITIALIZED;
1da177e4
LT
1365}
1366
eeb46134 1367static void mgslpc_program_hw(MGSLPC_INFO *info, struct tty_struct *tty)
1da177e4
LT
1368{
1369 unsigned long flags;
1370
3d553993 1371 spin_lock_irqsave(&info->lock, flags);
d12341f9 1372
1da177e4
LT
1373 rx_stop(info);
1374 tx_stop(info);
1375 info->tx_count = info->tx_put = info->tx_get = 0;
d12341f9 1376
1da177e4
LT
1377 if (info->params.mode == MGSL_MODE_HDLC || info->netcount)
1378 hdlc_mode(info);
1379 else
1380 async_mode(info);
d12341f9 1381
1da177e4 1382 set_signals(info);
d12341f9 1383
1da177e4
LT
1384 info->dcd_chkcount = 0;
1385 info->cts_chkcount = 0;
1386 info->ri_chkcount = 0;
1387 info->dsr_chkcount = 0;
1388
1389 irq_enable(info, CHB, IRQ_DCD | IRQ_CTS);
1390 port_irq_enable(info, (unsigned char) PVR_DSR | PVR_RI);
1391 get_signals(info);
d12341f9 1392
373f5aed 1393 if (info->netcount || (tty && (tty->termios.c_cflag & CREAD)))
1da177e4 1394 rx_start(info);
d12341f9 1395
3d553993 1396 spin_unlock_irqrestore(&info->lock, flags);
1da177e4
LT
1397}
1398
1399/* Reconfigure adapter based on new parameters
1400 */
eeb46134 1401static void mgslpc_change_params(MGSLPC_INFO *info, struct tty_struct *tty)
1da177e4
LT
1402{
1403 unsigned cflag;
1404 int bits_per_char;
1405
373f5aed 1406 if (!tty)
1da177e4 1407 return;
d12341f9 1408
1da177e4
LT
1409 if (debug_level >= DEBUG_LEVEL_INFO)
1410 printk("%s(%d):mgslpc_change_params(%s)\n",
3d553993 1411 __FILE__, __LINE__, info->device_name);
d12341f9 1412
373f5aed 1413 cflag = tty->termios.c_cflag;
1da177e4 1414
9fe8074b
JP
1415 /* if B0 rate (hangup) specified then negate RTS and DTR */
1416 /* otherwise assert RTS and DTR */
3d553993 1417 if (cflag & CBAUD)
9fe8074b 1418 info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
1da177e4 1419 else
9fe8074b 1420 info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
d12341f9 1421
1da177e4 1422 /* byte size and parity */
d12341f9 1423
1da177e4
LT
1424 switch (cflag & CSIZE) {
1425 case CS5: info->params.data_bits = 5; break;
1426 case CS6: info->params.data_bits = 6; break;
1427 case CS7: info->params.data_bits = 7; break;
1428 case CS8: info->params.data_bits = 8; break;
1429 default: info->params.data_bits = 7; break;
1430 }
d12341f9 1431
1da177e4
LT
1432 if (cflag & CSTOPB)
1433 info->params.stop_bits = 2;
1434 else
1435 info->params.stop_bits = 1;
1436
1437 info->params.parity = ASYNC_PARITY_NONE;
1438 if (cflag & PARENB) {
1439 if (cflag & PARODD)
1440 info->params.parity = ASYNC_PARITY_ODD;
1441 else
1442 info->params.parity = ASYNC_PARITY_EVEN;
1443#ifdef CMSPAR
1444 if (cflag & CMSPAR)
1445 info->params.parity = ASYNC_PARITY_SPACE;
1446#endif
1447 }
1448
1449 /* calculate number of jiffies to transmit a full
1450 * FIFO (32 bytes) at specified data rate
1451 */
d12341f9 1452 bits_per_char = info->params.data_bits +
1da177e4
LT
1453 info->params.stop_bits + 1;
1454
1455 /* if port data rate is set to 460800 or less then
1456 * allow tty settings to override, otherwise keep the
1457 * current data rate.
1458 */
1459 if (info->params.data_rate <= 460800) {
eeb46134 1460 info->params.data_rate = tty_get_baud_rate(tty);
1da177e4 1461 }
d12341f9 1462
3d553993 1463 if (info->params.data_rate) {
d12341f9 1464 info->timeout = (32*HZ*bits_per_char) /
1da177e4
LT
1465 info->params.data_rate;
1466 }
1467 info->timeout += HZ/50; /* Add .02 seconds of slop */
1468
1469 if (cflag & CRTSCTS)
eeb46134 1470 info->port.flags |= ASYNC_CTS_FLOW;
1da177e4 1471 else
eeb46134 1472 info->port.flags &= ~ASYNC_CTS_FLOW;
d12341f9 1473
1da177e4 1474 if (cflag & CLOCAL)
eeb46134 1475 info->port.flags &= ~ASYNC_CHECK_CD;
1da177e4 1476 else
eeb46134 1477 info->port.flags |= ASYNC_CHECK_CD;
1da177e4
LT
1478
1479 /* process tty input control flags */
d12341f9 1480
1da177e4 1481 info->read_status_mask = 0;
eeb46134 1482 if (I_INPCK(tty))
1da177e4 1483 info->read_status_mask |= BIT7 | BIT6;
eeb46134 1484 if (I_IGNPAR(tty))
1da177e4
LT
1485 info->ignore_status_mask |= BIT7 | BIT6;
1486
eeb46134 1487 mgslpc_program_hw(info, tty);
1da177e4
LT
1488}
1489
1490/* Add a character to the transmit buffer
1491 */
d7e752e2 1492static int mgslpc_put_char(struct tty_struct *tty, unsigned char ch)
1da177e4
LT
1493{
1494 MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1495 unsigned long flags;
1496
1497 if (debug_level >= DEBUG_LEVEL_INFO) {
3d553993
AK
1498 printk("%s(%d):mgslpc_put_char(%d) on %s\n",
1499 __FILE__, __LINE__, ch, info->device_name);
1da177e4
LT
1500 }
1501
1502 if (mgslpc_paranoia_check(info, tty->name, "mgslpc_put_char"))
d7e752e2 1503 return 0;
1da177e4 1504
326f28e9 1505 if (!info->tx_buf)
d7e752e2 1506 return 0;
1da177e4 1507
3d553993 1508 spin_lock_irqsave(&info->lock, flags);
d12341f9 1509
1da177e4
LT
1510 if (info->params.mode == MGSL_MODE_ASYNC || !info->tx_active) {
1511 if (info->tx_count < TXBUFSIZE - 1) {
1512 info->tx_buf[info->tx_put++] = ch;
1513 info->tx_put &= TXBUFSIZE-1;
1514 info->tx_count++;
1515 }
1516 }
d12341f9 1517
3d553993 1518 spin_unlock_irqrestore(&info->lock, flags);
d7e752e2 1519 return 1;
1da177e4
LT
1520}
1521
1522/* Enable transmitter so remaining characters in the
1523 * transmit buffer are sent.
1524 */
1525static void mgslpc_flush_chars(struct tty_struct *tty)
1526{
1527 MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1528 unsigned long flags;
d12341f9 1529
1da177e4 1530 if (debug_level >= DEBUG_LEVEL_INFO)
3d553993
AK
1531 printk("%s(%d):mgslpc_flush_chars() entry on %s tx_count=%d\n",
1532 __FILE__, __LINE__, info->device_name, info->tx_count);
d12341f9 1533
1da177e4
LT
1534 if (mgslpc_paranoia_check(info, tty->name, "mgslpc_flush_chars"))
1535 return;
1536
1537 if (info->tx_count <= 0 || tty->stopped ||
1538 tty->hw_stopped || !info->tx_buf)
1539 return;
1540
1541 if (debug_level >= DEBUG_LEVEL_INFO)
3d553993
AK
1542 printk("%s(%d):mgslpc_flush_chars() entry on %s starting transmitter\n",
1543 __FILE__, __LINE__, info->device_name);
1da177e4 1544
3d553993 1545 spin_lock_irqsave(&info->lock, flags);
1da177e4 1546 if (!info->tx_active)
3d553993
AK
1547 tx_start(info, tty);
1548 spin_unlock_irqrestore(&info->lock, flags);
1da177e4
LT
1549}
1550
1551/* Send a block of data
d12341f9 1552 *
1da177e4 1553 * Arguments:
d12341f9 1554 *
1da177e4
LT
1555 * tty pointer to tty information structure
1556 * buf pointer to buffer containing send data
1557 * count size of send data in bytes
d12341f9 1558 *
1da177e4
LT
1559 * Returns: number of characters written
1560 */
1561static int mgslpc_write(struct tty_struct * tty,
1562 const unsigned char *buf, int count)
1563{
1564 int c, ret = 0;
1565 MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1566 unsigned long flags;
d12341f9 1567
1da177e4 1568 if (debug_level >= DEBUG_LEVEL_INFO)
3d553993
AK
1569 printk("%s(%d):mgslpc_write(%s) count=%d\n",
1570 __FILE__, __LINE__, info->device_name, count);
d12341f9 1571
1da177e4 1572 if (mgslpc_paranoia_check(info, tty->name, "mgslpc_write") ||
326f28e9 1573 !info->tx_buf)
1da177e4
LT
1574 goto cleanup;
1575
1576 if (info->params.mode == MGSL_MODE_HDLC) {
1577 if (count > TXBUFSIZE) {
1578 ret = -EIO;
1579 goto cleanup;
1580 }
1581 if (info->tx_active)
1582 goto cleanup;
1583 else if (info->tx_count)
1584 goto start;
1585 }
1586
1587 for (;;) {
1588 c = min(count,
1589 min(TXBUFSIZE - info->tx_count - 1,
1590 TXBUFSIZE - info->tx_put));
1591 if (c <= 0)
1592 break;
d12341f9 1593
1da177e4
LT
1594 memcpy(info->tx_buf + info->tx_put, buf, c);
1595
3d553993 1596 spin_lock_irqsave(&info->lock, flags);
1da177e4
LT
1597 info->tx_put = (info->tx_put + c) & (TXBUFSIZE-1);
1598 info->tx_count += c;
3d553993 1599 spin_unlock_irqrestore(&info->lock, flags);
1da177e4
LT
1600
1601 buf += c;
1602 count -= c;
1603 ret += c;
1604 }
1605start:
3d553993
AK
1606 if (info->tx_count && !tty->stopped && !tty->hw_stopped) {
1607 spin_lock_irqsave(&info->lock, flags);
1da177e4 1608 if (!info->tx_active)
3d553993
AK
1609 tx_start(info, tty);
1610 spin_unlock_irqrestore(&info->lock, flags);
1611 }
d12341f9 1612cleanup:
1da177e4 1613 if (debug_level >= DEBUG_LEVEL_INFO)
3d553993
AK
1614 printk("%s(%d):mgslpc_write(%s) returning=%d\n",
1615 __FILE__, __LINE__, info->device_name, ret);
1da177e4
LT
1616 return ret;
1617}
1618
1619/* Return the count of free bytes in transmit buffer
1620 */
1621static int mgslpc_write_room(struct tty_struct *tty)
1622{
1623 MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1624 int ret;
d12341f9 1625
1da177e4
LT
1626 if (mgslpc_paranoia_check(info, tty->name, "mgslpc_write_room"))
1627 return 0;
1628
1629 if (info->params.mode == MGSL_MODE_HDLC) {
1630 /* HDLC (frame oriented) mode */
1631 if (info->tx_active)
1632 return 0;
1633 else
1634 return HDLC_MAX_FRAME_SIZE;
1635 } else {
1636 ret = TXBUFSIZE - info->tx_count - 1;
1637 if (ret < 0)
1638 ret = 0;
1639 }
d12341f9 1640
1da177e4
LT
1641 if (debug_level >= DEBUG_LEVEL_INFO)
1642 printk("%s(%d):mgslpc_write_room(%s)=%d\n",
3d553993 1643 __FILE__, __LINE__, info->device_name, ret);
1da177e4
LT
1644 return ret;
1645}
1646
1647/* Return the count of bytes in transmit buffer
1648 */
1649static int mgslpc_chars_in_buffer(struct tty_struct *tty)
1650{
1651 MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1652 int rc;
d12341f9 1653
1da177e4
LT
1654 if (debug_level >= DEBUG_LEVEL_INFO)
1655 printk("%s(%d):mgslpc_chars_in_buffer(%s)\n",
3d553993 1656 __FILE__, __LINE__, info->device_name);
d12341f9 1657
1da177e4
LT
1658 if (mgslpc_paranoia_check(info, tty->name, "mgslpc_chars_in_buffer"))
1659 return 0;
d12341f9 1660
1da177e4
LT
1661 if (info->params.mode == MGSL_MODE_HDLC)
1662 rc = info->tx_active ? info->max_frame_size : 0;
1663 else
1664 rc = info->tx_count;
1665
1666 if (debug_level >= DEBUG_LEVEL_INFO)
1667 printk("%s(%d):mgslpc_chars_in_buffer(%s)=%d\n",
3d553993 1668 __FILE__, __LINE__, info->device_name, rc);
d12341f9 1669
1da177e4
LT
1670 return rc;
1671}
1672
1673/* Discard all data in the send buffer
1674 */
1675static void mgslpc_flush_buffer(struct tty_struct *tty)
1676{
1677 MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1678 unsigned long flags;
d12341f9 1679
1da177e4
LT
1680 if (debug_level >= DEBUG_LEVEL_INFO)
1681 printk("%s(%d):mgslpc_flush_buffer(%s) entry\n",
3d553993 1682 __FILE__, __LINE__, info->device_name);
d12341f9 1683
1da177e4
LT
1684 if (mgslpc_paranoia_check(info, tty->name, "mgslpc_flush_buffer"))
1685 return;
d12341f9 1686
3d553993 1687 spin_lock_irqsave(&info->lock, flags);
1da177e4 1688 info->tx_count = info->tx_put = info->tx_get = 0;
d12341f9 1689 del_timer(&info->tx_timer);
3d553993 1690 spin_unlock_irqrestore(&info->lock, flags);
1da177e4
LT
1691
1692 wake_up_interruptible(&tty->write_wait);
1693 tty_wakeup(tty);
1694}
1695
1696/* Send a high-priority XON/XOFF character
1697 */
1698static void mgslpc_send_xchar(struct tty_struct *tty, char ch)
1699{
1700 MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1701 unsigned long flags;
1702
1703 if (debug_level >= DEBUG_LEVEL_INFO)
1704 printk("%s(%d):mgslpc_send_xchar(%s,%d)\n",
3d553993 1705 __FILE__, __LINE__, info->device_name, ch);
d12341f9 1706
1da177e4
LT
1707 if (mgslpc_paranoia_check(info, tty->name, "mgslpc_send_xchar"))
1708 return;
1709
1710 info->x_char = ch;
1711 if (ch) {
3d553993 1712 spin_lock_irqsave(&info->lock, flags);
1da177e4 1713 if (!info->tx_enabled)
3d553993
AK
1714 tx_start(info, tty);
1715 spin_unlock_irqrestore(&info->lock, flags);
1da177e4
LT
1716 }
1717}
1718
1719/* Signal remote device to throttle send data (our receive data)
1720 */
1721static void mgslpc_throttle(struct tty_struct * tty)
1722{
1723 MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1724 unsigned long flags;
d12341f9 1725
1da177e4
LT
1726 if (debug_level >= DEBUG_LEVEL_INFO)
1727 printk("%s(%d):mgslpc_throttle(%s) entry\n",
3d553993 1728 __FILE__, __LINE__, info->device_name);
1da177e4
LT
1729
1730 if (mgslpc_paranoia_check(info, tty->name, "mgslpc_throttle"))
1731 return;
d12341f9 1732
1da177e4
LT
1733 if (I_IXOFF(tty))
1734 mgslpc_send_xchar(tty, STOP_CHAR(tty));
d12341f9 1735
3d553993
AK
1736 if (tty->termios.c_cflag & CRTSCTS) {
1737 spin_lock_irqsave(&info->lock, flags);
1da177e4 1738 info->serial_signals &= ~SerialSignal_RTS;
3d553993
AK
1739 set_signals(info);
1740 spin_unlock_irqrestore(&info->lock, flags);
1da177e4
LT
1741 }
1742}
1743
1744/* Signal remote device to stop throttling send data (our receive data)
1745 */
1746static void mgslpc_unthrottle(struct tty_struct * tty)
1747{
1748 MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1749 unsigned long flags;
d12341f9 1750
1da177e4
LT
1751 if (debug_level >= DEBUG_LEVEL_INFO)
1752 printk("%s(%d):mgslpc_unthrottle(%s) entry\n",
3d553993 1753 __FILE__, __LINE__, info->device_name);
1da177e4
LT
1754
1755 if (mgslpc_paranoia_check(info, tty->name, "mgslpc_unthrottle"))
1756 return;
d12341f9 1757
1da177e4
LT
1758 if (I_IXOFF(tty)) {
1759 if (info->x_char)
1760 info->x_char = 0;
1761 else
1762 mgslpc_send_xchar(tty, START_CHAR(tty));
1763 }
d12341f9 1764
3d553993
AK
1765 if (tty->termios.c_cflag & CRTSCTS) {
1766 spin_lock_irqsave(&info->lock, flags);
1da177e4 1767 info->serial_signals |= SerialSignal_RTS;
3d553993
AK
1768 set_signals(info);
1769 spin_unlock_irqrestore(&info->lock, flags);
1da177e4
LT
1770 }
1771}
1772
1773/* get the current serial statistics
1774 */
1775static int get_stats(MGSLPC_INFO * info, struct mgsl_icount __user *user_icount)
1776{
1777 int err;
1778 if (debug_level >= DEBUG_LEVEL_INFO)
1779 printk("get_params(%s)\n", info->device_name);
a7482a2e
PF
1780 if (!user_icount) {
1781 memset(&info->icount, 0, sizeof(info->icount));
1782 } else {
1783 COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount));
1784 if (err)
1785 return -EFAULT;
1786 }
1da177e4
LT
1787 return 0;
1788}
1789
1790/* get the current serial parameters
1791 */
1792static int get_params(MGSLPC_INFO * info, MGSL_PARAMS __user *user_params)
1793{
1794 int err;
1795 if (debug_level >= DEBUG_LEVEL_INFO)
1796 printk("get_params(%s)\n", info->device_name);
1797 COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS));
1798 if (err)
1799 return -EFAULT;
1800 return 0;
1801}
1802
1803/* set the serial parameters
d12341f9 1804 *
1da177e4 1805 * Arguments:
d12341f9 1806 *
3d553993
AK
1807 * info pointer to device instance data
1808 * new_params user buffer containing new serial params
1da177e4
LT
1809 *
1810 * Returns: 0 if success, otherwise error code
1811 */
eeb46134 1812static int set_params(MGSLPC_INFO * info, MGSL_PARAMS __user *new_params, struct tty_struct *tty)
1da177e4 1813{
3d553993 1814 unsigned long flags;
1da177e4
LT
1815 MGSL_PARAMS tmp_params;
1816 int err;
d12341f9 1817
1da177e4
LT
1818 if (debug_level >= DEBUG_LEVEL_INFO)
1819 printk("%s(%d):set_params %s\n", __FILE__,__LINE__,
3d553993 1820 info->device_name);
1da177e4
LT
1821 COPY_FROM_USER(err,&tmp_params, new_params, sizeof(MGSL_PARAMS));
1822 if (err) {
3d553993
AK
1823 if (debug_level >= DEBUG_LEVEL_INFO)
1824 printk("%s(%d):set_params(%s) user buffer copy failed\n",
1825 __FILE__, __LINE__, info->device_name);
1da177e4
LT
1826 return -EFAULT;
1827 }
d12341f9 1828
3d553993 1829 spin_lock_irqsave(&info->lock, flags);
1da177e4 1830 memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
3d553993 1831 spin_unlock_irqrestore(&info->lock, flags);
d12341f9 1832
3d553993 1833 mgslpc_change_params(info, tty);
d12341f9 1834
1da177e4
LT
1835 return 0;
1836}
1837
1838static int get_txidle(MGSLPC_INFO * info, int __user *idle_mode)
1839{
1840 int err;
1841 if (debug_level >= DEBUG_LEVEL_INFO)
1842 printk("get_txidle(%s)=%d\n", info->device_name, info->idle_mode);
1843 COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int));
1844 if (err)
1845 return -EFAULT;
1846 return 0;
1847}
1848
1849static int set_txidle(MGSLPC_INFO * info, int idle_mode)
1850{
3d553993 1851 unsigned long flags;
1da177e4
LT
1852 if (debug_level >= DEBUG_LEVEL_INFO)
1853 printk("set_txidle(%s,%d)\n", info->device_name, idle_mode);
3d553993 1854 spin_lock_irqsave(&info->lock, flags);
1da177e4
LT
1855 info->idle_mode = idle_mode;
1856 tx_set_idle(info);
3d553993 1857 spin_unlock_irqrestore(&info->lock, flags);
1da177e4
LT
1858 return 0;
1859}
1860
1861static int get_interface(MGSLPC_INFO * info, int __user *if_mode)
1862{
1863 int err;
1864 if (debug_level >= DEBUG_LEVEL_INFO)
1865 printk("get_interface(%s)=%d\n", info->device_name, info->if_mode);
1866 COPY_TO_USER(err,if_mode, &info->if_mode, sizeof(int));
1867 if (err)
1868 return -EFAULT;
1869 return 0;
1870}
1871
1872static int set_interface(MGSLPC_INFO * info, int if_mode)
1873{
3d553993 1874 unsigned long flags;
1da177e4
LT
1875 unsigned char val;
1876 if (debug_level >= DEBUG_LEVEL_INFO)
1877 printk("set_interface(%s,%d)\n", info->device_name, if_mode);
3d553993 1878 spin_lock_irqsave(&info->lock, flags);
1da177e4
LT
1879 info->if_mode = if_mode;
1880
1881 val = read_reg(info, PVR) & 0x0f;
1882 switch (info->if_mode)
1883 {
1884 case MGSL_INTERFACE_RS232: val |= PVR_RS232; break;
1885 case MGSL_INTERFACE_V35: val |= PVR_V35; break;
1886 case MGSL_INTERFACE_RS422: val |= PVR_RS422; break;
1887 }
1888 write_reg(info, PVR, val);
1889
3d553993 1890 spin_unlock_irqrestore(&info->lock, flags);
1da177e4
LT
1891 return 0;
1892}
1893
eeb46134 1894static int set_txenable(MGSLPC_INFO * info, int enable, struct tty_struct *tty)
1da177e4 1895{
3d553993 1896 unsigned long flags;
d12341f9 1897
1da177e4
LT
1898 if (debug_level >= DEBUG_LEVEL_INFO)
1899 printk("set_txenable(%s,%d)\n", info->device_name, enable);
d12341f9 1900
3d553993 1901 spin_lock_irqsave(&info->lock, flags);
1da177e4
LT
1902 if (enable) {
1903 if (!info->tx_enabled)
eeb46134 1904 tx_start(info, tty);
1da177e4
LT
1905 } else {
1906 if (info->tx_enabled)
1907 tx_stop(info);
1908 }
3d553993 1909 spin_unlock_irqrestore(&info->lock, flags);
1da177e4
LT
1910 return 0;
1911}
1912
1913static int tx_abort(MGSLPC_INFO * info)
1914{
3d553993 1915 unsigned long flags;
d12341f9 1916
1da177e4
LT
1917 if (debug_level >= DEBUG_LEVEL_INFO)
1918 printk("tx_abort(%s)\n", info->device_name);
d12341f9 1919
3d553993 1920 spin_lock_irqsave(&info->lock, flags);
1da177e4
LT
1921 if (info->tx_active && info->tx_count &&
1922 info->params.mode == MGSL_MODE_HDLC) {
1923 /* clear data count so FIFO is not filled on next IRQ.
1924 * This results in underrun and abort transmission.
1925 */
1926 info->tx_count = info->tx_put = info->tx_get = 0;
0fab6de0 1927 info->tx_aborting = true;
1da177e4 1928 }
3d553993 1929 spin_unlock_irqrestore(&info->lock, flags);
1da177e4
LT
1930 return 0;
1931}
1932
1933static int set_rxenable(MGSLPC_INFO * info, int enable)
1934{
3d553993 1935 unsigned long flags;
d12341f9 1936
1da177e4
LT
1937 if (debug_level >= DEBUG_LEVEL_INFO)
1938 printk("set_rxenable(%s,%d)\n", info->device_name, enable);
d12341f9 1939
3d553993 1940 spin_lock_irqsave(&info->lock, flags);
1da177e4
LT
1941 if (enable) {
1942 if (!info->rx_enabled)
1943 rx_start(info);
1944 } else {
1945 if (info->rx_enabled)
1946 rx_stop(info);
1947 }
3d553993 1948 spin_unlock_irqrestore(&info->lock, flags);
1da177e4
LT
1949 return 0;
1950}
1951
1952/* wait for specified event to occur
d12341f9 1953 *
3d553993
AK
1954 * Arguments: info pointer to device instance data
1955 * mask pointer to bitmask of events to wait for
1956 * Return Value: 0 if successful and bit mask updated with
1da177e4 1957 * of events triggerred,
3d553993 1958 * otherwise error code
1da177e4
LT
1959 */
1960static int wait_events(MGSLPC_INFO * info, int __user *mask_ptr)
1961{
3d553993 1962 unsigned long flags;
1da177e4
LT
1963 int s;
1964 int rc=0;
1965 struct mgsl_icount cprev, cnow;
1966 int events;
1967 int mask;
1968 struct _input_signal_events oldsigs, newsigs;
1969 DECLARE_WAITQUEUE(wait, current);
1970
1971 COPY_FROM_USER(rc,&mask, mask_ptr, sizeof(int));
1972 if (rc)
1973 return -EFAULT;
d12341f9 1974
1da177e4
LT
1975 if (debug_level >= DEBUG_LEVEL_INFO)
1976 printk("wait_events(%s,%d)\n", info->device_name, mask);
1977
3d553993 1978 spin_lock_irqsave(&info->lock, flags);
1da177e4
LT
1979
1980 /* return immediately if state matches requested events */
1981 get_signals(info);
1982 s = info->serial_signals;
1983 events = mask &
1984 ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) +
3d553993 1985 ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) +
1da177e4
LT
1986 ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) +
1987 ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) );
1988 if (events) {
3d553993 1989 spin_unlock_irqrestore(&info->lock, flags);
1da177e4
LT
1990 goto exit;
1991 }
1992
1993 /* save current irq counts */
1994 cprev = info->icount;
1995 oldsigs = info->input_signal_events;
d12341f9 1996
1da177e4
LT
1997 if ((info->params.mode == MGSL_MODE_HDLC) &&
1998 (mask & MgslEvent_ExitHuntMode))
1999 irq_enable(info, CHA, IRQ_EXITHUNT);
d12341f9 2000
1da177e4
LT
2001 set_current_state(TASK_INTERRUPTIBLE);
2002 add_wait_queue(&info->event_wait_q, &wait);
d12341f9 2003
3d553993 2004 spin_unlock_irqrestore(&info->lock, flags);
d12341f9
JG
2005
2006
1da177e4
LT
2007 for(;;) {
2008 schedule();
2009 if (signal_pending(current)) {
2010 rc = -ERESTARTSYS;
2011 break;
2012 }
d12341f9 2013
1da177e4 2014 /* get current irq counts */
3d553993 2015 spin_lock_irqsave(&info->lock, flags);
1da177e4
LT
2016 cnow = info->icount;
2017 newsigs = info->input_signal_events;
2018 set_current_state(TASK_INTERRUPTIBLE);
3d553993 2019 spin_unlock_irqrestore(&info->lock, flags);
1da177e4
LT
2020
2021 /* if no change, wait aborted for some reason */
2022 if (newsigs.dsr_up == oldsigs.dsr_up &&
2023 newsigs.dsr_down == oldsigs.dsr_down &&
2024 newsigs.dcd_up == oldsigs.dcd_up &&
2025 newsigs.dcd_down == oldsigs.dcd_down &&
2026 newsigs.cts_up == oldsigs.cts_up &&
2027 newsigs.cts_down == oldsigs.cts_down &&
2028 newsigs.ri_up == oldsigs.ri_up &&
2029 newsigs.ri_down == oldsigs.ri_down &&
2030 cnow.exithunt == cprev.exithunt &&
2031 cnow.rxidle == cprev.rxidle) {
2032 rc = -EIO;
2033 break;
2034 }
2035
2036 events = mask &
2037 ( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) +
2038 (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) +
2039 (newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) +
2040 (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) +
2041 (newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) +
2042 (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) +
2043 (newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) +
2044 (newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) +
2045 (cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) +
2046 (cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) );
2047 if (events)
2048 break;
d12341f9 2049
1da177e4
LT
2050 cprev = cnow;
2051 oldsigs = newsigs;
2052 }
d12341f9 2053
1da177e4
LT
2054 remove_wait_queue(&info->event_wait_q, &wait);
2055 set_current_state(TASK_RUNNING);
2056
2057 if (mask & MgslEvent_ExitHuntMode) {
3d553993 2058 spin_lock_irqsave(&info->lock, flags);
1da177e4
LT
2059 if (!waitqueue_active(&info->event_wait_q))
2060 irq_disable(info, CHA, IRQ_EXITHUNT);
3d553993 2061 spin_unlock_irqrestore(&info->lock, flags);
1da177e4
LT
2062 }
2063exit:
2064 if (rc == 0)
2065 PUT_USER(rc, events, mask_ptr);
2066 return rc;
2067}
2068
2069static int modem_input_wait(MGSLPC_INFO *info,int arg)
2070{
3d553993 2071 unsigned long flags;
1da177e4
LT
2072 int rc;
2073 struct mgsl_icount cprev, cnow;
2074 DECLARE_WAITQUEUE(wait, current);
2075
2076 /* save current irq counts */
3d553993 2077 spin_lock_irqsave(&info->lock, flags);
1da177e4
LT
2078 cprev = info->icount;
2079 add_wait_queue(&info->status_event_wait_q, &wait);
2080 set_current_state(TASK_INTERRUPTIBLE);
3d553993 2081 spin_unlock_irqrestore(&info->lock, flags);
1da177e4
LT
2082
2083 for(;;) {
2084 schedule();
2085 if (signal_pending(current)) {
2086 rc = -ERESTARTSYS;
2087 break;
2088 }
2089
2090 /* get new irq counts */
3d553993 2091 spin_lock_irqsave(&info->lock, flags);
1da177e4
LT
2092 cnow = info->icount;
2093 set_current_state(TASK_INTERRUPTIBLE);
3d553993 2094 spin_unlock_irqrestore(&info->lock, flags);
1da177e4
LT
2095
2096 /* if no change, wait aborted for some reason */
2097 if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
2098 cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
2099 rc = -EIO;
2100 break;
2101 }
2102
2103 /* check for change in caller specified modem input */
2104 if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) ||
2105 (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) ||
2106 (arg & TIOCM_CD && cnow.dcd != cprev.dcd) ||
2107 (arg & TIOCM_CTS && cnow.cts != cprev.cts)) {
2108 rc = 0;
2109 break;
2110 }
2111
2112 cprev = cnow;
2113 }
2114 remove_wait_queue(&info->status_event_wait_q, &wait);
2115 set_current_state(TASK_RUNNING);
2116 return rc;
2117}
2118
2119/* return the state of the serial control and status signals
2120 */
60b33c13 2121static int tiocmget(struct tty_struct *tty)
1da177e4
LT
2122{
2123 MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
2124 unsigned int result;
3d553993 2125 unsigned long flags;
1da177e4 2126
3d553993
AK
2127 spin_lock_irqsave(&info->lock, flags);
2128 get_signals(info);
2129 spin_unlock_irqrestore(&info->lock, flags);
1da177e4
LT
2130
2131 result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS:0) +
2132 ((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR:0) +
2133 ((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR:0) +
2134 ((info->serial_signals & SerialSignal_RI) ? TIOCM_RNG:0) +
2135 ((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR:0) +
2136 ((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS:0);
2137
2138 if (debug_level >= DEBUG_LEVEL_INFO)
2139 printk("%s(%d):%s tiocmget() value=%08X\n",
3d553993 2140 __FILE__, __LINE__, info->device_name, result);
1da177e4
LT
2141 return result;
2142}
2143
2144/* set modem control signals (DTR/RTS)
2145 */
20b9d177 2146static int tiocmset(struct tty_struct *tty,
1da177e4
LT
2147 unsigned int set, unsigned int clear)
2148{
2149 MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
3d553993 2150 unsigned long flags;
1da177e4
LT
2151
2152 if (debug_level >= DEBUG_LEVEL_INFO)
2153 printk("%s(%d):%s tiocmset(%x,%x)\n",
3d553993 2154 __FILE__, __LINE__, info->device_name, set, clear);
1da177e4
LT
2155
2156 if (set & TIOCM_RTS)
2157 info->serial_signals |= SerialSignal_RTS;
2158 if (set & TIOCM_DTR)
2159 info->serial_signals |= SerialSignal_DTR;
2160 if (clear & TIOCM_RTS)
2161 info->serial_signals &= ~SerialSignal_RTS;
2162 if (clear & TIOCM_DTR)
2163 info->serial_signals &= ~SerialSignal_DTR;
2164
3d553993
AK
2165 spin_lock_irqsave(&info->lock, flags);
2166 set_signals(info);
2167 spin_unlock_irqrestore(&info->lock, flags);
1da177e4
LT
2168
2169 return 0;
2170}
2171
2172/* Set or clear transmit break condition
2173 *
2174 * Arguments: tty pointer to tty instance data
2175 * break_state -1=set break condition, 0=clear
2176 */
9e98966c 2177static int mgslpc_break(struct tty_struct *tty, int break_state)
1da177e4
LT
2178{
2179 MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
2180 unsigned long flags;
d12341f9 2181
1da177e4
LT
2182 if (debug_level >= DEBUG_LEVEL_INFO)
2183 printk("%s(%d):mgslpc_break(%s,%d)\n",
3d553993 2184 __FILE__, __LINE__, info->device_name, break_state);
d12341f9 2185
1da177e4 2186 if (mgslpc_paranoia_check(info, tty->name, "mgslpc_break"))
9e98966c 2187 return -EINVAL;
1da177e4 2188
3d553993
AK
2189 spin_lock_irqsave(&info->lock, flags);
2190 if (break_state == -1)
1da177e4 2191 set_reg_bits(info, CHA+DAFO, BIT6);
d12341f9 2192 else
1da177e4 2193 clear_reg_bits(info, CHA+DAFO, BIT6);
3d553993 2194 spin_unlock_irqrestore(&info->lock, flags);
9e98966c 2195 return 0;
1da177e4
LT
2196}
2197
0587102c
AC
2198static int mgslpc_get_icount(struct tty_struct *tty,
2199 struct serial_icounter_struct *icount)
2200{
2201 MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
2202 struct mgsl_icount cnow; /* kernel counter temps */
2203 unsigned long flags;
2204
3d553993 2205 spin_lock_irqsave(&info->lock, flags);
0587102c 2206 cnow = info->icount;
3d553993 2207 spin_unlock_irqrestore(&info->lock, flags);
0587102c
AC
2208
2209 icount->cts = cnow.cts;
2210 icount->dsr = cnow.dsr;
2211 icount->rng = cnow.rng;
2212 icount->dcd = cnow.dcd;
2213 icount->rx = cnow.rx;
2214 icount->tx = cnow.tx;
2215 icount->frame = cnow.frame;
2216 icount->overrun = cnow.overrun;
2217 icount->parity = cnow.parity;
2218 icount->brk = cnow.brk;
2219 icount->buf_overrun = cnow.buf_overrun;
2220
2221 return 0;
2222}
2223
1da177e4 2224/* Service an IOCTL request
d12341f9 2225 *
1da177e4 2226 * Arguments:
d12341f9 2227 *
3d553993
AK
2228 * tty pointer to tty instance data
2229 * cmd IOCTL command code
2230 * arg command argument/context
d12341f9 2231 *
1da177e4
LT
2232 * Return Value: 0 if success, otherwise error code
2233 */
751b3840 2234static int mgslpc_ioctl(struct tty_struct *tty,
1da177e4
LT
2235 unsigned int cmd, unsigned long arg)
2236{
2237 MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
eeb46134 2238 void __user *argp = (void __user *)arg;
d12341f9 2239
1da177e4 2240 if (debug_level >= DEBUG_LEVEL_INFO)
3d553993
AK
2241 printk("%s(%d):mgslpc_ioctl %s cmd=%08X\n", __FILE__, __LINE__,
2242 info->device_name, cmd);
d12341f9 2243
1da177e4
LT
2244 if (mgslpc_paranoia_check(info, tty->name, "mgslpc_ioctl"))
2245 return -ENODEV;
2246
2247 if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
0587102c 2248 (cmd != TIOCMIWAIT)) {
1da177e4
LT
2249 if (tty->flags & (1 << TTY_IO_ERROR))
2250 return -EIO;
2251 }
2252
1da177e4
LT
2253 switch (cmd) {
2254 case MGSL_IOCGPARAMS:
2255 return get_params(info, argp);
2256 case MGSL_IOCSPARAMS:
eeb46134 2257 return set_params(info, argp, tty);
1da177e4
LT
2258 case MGSL_IOCGTXIDLE:
2259 return get_txidle(info, argp);
2260 case MGSL_IOCSTXIDLE:
2261 return set_txidle(info, (int)arg);
2262 case MGSL_IOCGIF:
2263 return get_interface(info, argp);
2264 case MGSL_IOCSIF:
2265 return set_interface(info,(int)arg);
2266 case MGSL_IOCTXENABLE:
eeb46134 2267 return set_txenable(info,(int)arg, tty);
1da177e4
LT
2268 case MGSL_IOCRXENABLE:
2269 return set_rxenable(info,(int)arg);
2270 case MGSL_IOCTXABORT:
2271 return tx_abort(info);
2272 case MGSL_IOCGSTATS:
2273 return get_stats(info, argp);
2274 case MGSL_IOCWAITEVENT:
2275 return wait_events(info, argp);
2276 case TIOCMIWAIT:
2277 return modem_input_wait(info,(int)arg);
1da177e4
LT
2278 default:
2279 return -ENOIOCTLCMD;
2280 }
2281 return 0;
2282}
2283
2284/* Set new termios settings
d12341f9 2285 *
1da177e4 2286 * Arguments:
d12341f9 2287 *
3d553993
AK
2288 * tty pointer to tty structure
2289 * termios pointer to buffer to hold returned old termios
1da177e4 2290 */
606d099c 2291static void mgslpc_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
1da177e4
LT
2292{
2293 MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
2294 unsigned long flags;
d12341f9 2295
1da177e4 2296 if (debug_level >= DEBUG_LEVEL_INFO)
3d553993
AK
2297 printk("%s(%d):mgslpc_set_termios %s\n", __FILE__, __LINE__,
2298 tty->driver->name);
d12341f9 2299
1da177e4 2300 /* just return if nothing has changed */
373f5aed
AC
2301 if ((tty->termios.c_cflag == old_termios->c_cflag)
2302 && (RELEVANT_IFLAG(tty->termios.c_iflag)
1da177e4
LT
2303 == RELEVANT_IFLAG(old_termios->c_iflag)))
2304 return;
2305
eeb46134 2306 mgslpc_change_params(info, tty);
1da177e4
LT
2307
2308 /* Handle transition to B0 status */
2309 if (old_termios->c_cflag & CBAUD &&
373f5aed 2310 !(tty->termios.c_cflag & CBAUD)) {
9fe8074b 2311 info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
3d553993
AK
2312 spin_lock_irqsave(&info->lock, flags);
2313 set_signals(info);
2314 spin_unlock_irqrestore(&info->lock, flags);
1da177e4 2315 }
d12341f9 2316
1da177e4
LT
2317 /* Handle transition away from B0 status */
2318 if (!(old_termios->c_cflag & CBAUD) &&
373f5aed 2319 tty->termios.c_cflag & CBAUD) {
1da177e4 2320 info->serial_signals |= SerialSignal_DTR;
3d553993
AK
2321 if (!(tty->termios.c_cflag & CRTSCTS) ||
2322 !test_bit(TTY_THROTTLED, &tty->flags)) {
1da177e4 2323 info->serial_signals |= SerialSignal_RTS;
3d553993
AK
2324 }
2325 spin_lock_irqsave(&info->lock, flags);
2326 set_signals(info);
2327 spin_unlock_irqrestore(&info->lock, flags);
1da177e4 2328 }
d12341f9 2329
1da177e4
LT
2330 /* Handle turning off CRTSCTS */
2331 if (old_termios->c_cflag & CRTSCTS &&
373f5aed 2332 !(tty->termios.c_cflag & CRTSCTS)) {
1da177e4
LT
2333 tty->hw_stopped = 0;
2334 tx_release(tty);
2335 }
2336}
2337
2338static void mgslpc_close(struct tty_struct *tty, struct file * filp)
2339{
2340 MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
eeb46134 2341 struct tty_port *port = &info->port;
1da177e4
LT
2342
2343 if (mgslpc_paranoia_check(info, tty->name, "mgslpc_close"))
2344 return;
d12341f9 2345
1da177e4
LT
2346 if (debug_level >= DEBUG_LEVEL_INFO)
2347 printk("%s(%d):mgslpc_close(%s) entry, count=%d\n",
3d553993 2348 __FILE__, __LINE__, info->device_name, port->count);
1da177e4 2349
eeb46134 2350 if (tty_port_close_start(port, tty, filp) == 0)
1da177e4 2351 goto cleanup;
d12341f9 2352
3d553993
AK
2353 if (port->flags & ASYNC_INITIALIZED)
2354 mgslpc_wait_until_sent(tty, info->timeout);
1da177e4 2355
978e595f 2356 mgslpc_flush_buffer(tty);
1da177e4 2357
978e595f 2358 tty_ldisc_flush(tty);
eeb46134
AC
2359 shutdown(info, tty);
2360
2361 tty_port_close_end(port, tty);
2362 tty_port_tty_set(port, NULL);
d12341f9 2363cleanup:
1da177e4 2364 if (debug_level >= DEBUG_LEVEL_INFO)
3d553993 2365 printk("%s(%d):mgslpc_close(%s) exit, count=%d\n", __FILE__, __LINE__,
eeb46134 2366 tty->driver->name, port->count);
1da177e4
LT
2367}
2368
2369/* Wait until the transmitter is empty.
2370 */
2371static void mgslpc_wait_until_sent(struct tty_struct *tty, int timeout)
2372{
2373 MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
2374 unsigned long orig_jiffies, char_time;
2375
3d553993 2376 if (!info)
1da177e4
LT
2377 return;
2378
2379 if (debug_level >= DEBUG_LEVEL_INFO)
2380 printk("%s(%d):mgslpc_wait_until_sent(%s) entry\n",
3d553993 2381 __FILE__, __LINE__, info->device_name);
d12341f9 2382
1da177e4
LT
2383 if (mgslpc_paranoia_check(info, tty->name, "mgslpc_wait_until_sent"))
2384 return;
2385
eeb46134 2386 if (!(info->port.flags & ASYNC_INITIALIZED))
1da177e4 2387 goto exit;
d12341f9 2388
1da177e4 2389 orig_jiffies = jiffies;
d12341f9 2390
1da177e4
LT
2391 /* Set check interval to 1/5 of estimated time to
2392 * send a character, and make it at least 1. The check
2393 * interval should also be less than the timeout.
2394 * Note: use tight timings here to satisfy the NIST-PCTS.
d12341f9
JG
2395 */
2396
3d553993
AK
2397 if (info->params.data_rate) {
2398 char_time = info->timeout/(32 * 5);
1da177e4
LT
2399 if (!char_time)
2400 char_time++;
2401 } else
2402 char_time = 1;
d12341f9 2403
1da177e4
LT
2404 if (timeout)
2405 char_time = min_t(unsigned long, char_time, timeout);
d12341f9 2406
1da177e4
LT
2407 if (info->params.mode == MGSL_MODE_HDLC) {
2408 while (info->tx_active) {
2409 msleep_interruptible(jiffies_to_msecs(char_time));
2410 if (signal_pending(current))
2411 break;
2412 if (timeout && time_after(jiffies, orig_jiffies + timeout))
2413 break;
2414 }
2415 } else {
2416 while ((info->tx_count || info->tx_active) &&
2417 info->tx_enabled) {
2418 msleep_interruptible(jiffies_to_msecs(char_time));
2419 if (signal_pending(current))
2420 break;
2421 if (timeout && time_after(jiffies, orig_jiffies + timeout))
2422 break;
2423 }
2424 }
d12341f9 2425
1da177e4
LT
2426exit:
2427 if (debug_level >= DEBUG_LEVEL_INFO)
2428 printk("%s(%d):mgslpc_wait_until_sent(%s) exit\n",
3d553993 2429 __FILE__, __LINE__, info->device_name);
1da177e4
LT
2430}
2431
2432/* Called by tty_hangup() when a hangup is signaled.
2433 * This is the same as closing all open files for the port.
2434 */
2435static void mgslpc_hangup(struct tty_struct *tty)
2436{
2437 MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
d12341f9 2438
1da177e4
LT
2439 if (debug_level >= DEBUG_LEVEL_INFO)
2440 printk("%s(%d):mgslpc_hangup(%s)\n",
3d553993 2441 __FILE__, __LINE__, info->device_name);
d12341f9 2442
1da177e4
LT
2443 if (mgslpc_paranoia_check(info, tty->name, "mgslpc_hangup"))
2444 return;
2445
2446 mgslpc_flush_buffer(tty);
eeb46134
AC
2447 shutdown(info, tty);
2448 tty_port_hangup(&info->port);
1da177e4
LT
2449}
2450
eeb46134 2451static int carrier_raised(struct tty_port *port)
1da177e4 2452{
eeb46134
AC
2453 MGSLPC_INFO *info = container_of(port, MGSLPC_INFO, port);
2454 unsigned long flags;
d12341f9 2455
3d553993
AK
2456 spin_lock_irqsave(&info->lock, flags);
2457 get_signals(info);
2458 spin_unlock_irqrestore(&info->lock, flags);
d12341f9 2459
eeb46134
AC
2460 if (info->serial_signals & SerialSignal_DCD)
2461 return 1;
2462 return 0;
2463}
d12341f9 2464
fcc8ac18 2465static void dtr_rts(struct tty_port *port, int onoff)
eeb46134
AC
2466{
2467 MGSLPC_INFO *info = container_of(port, MGSLPC_INFO, port);
2468 unsigned long flags;
d12341f9 2469
3d553993 2470 spin_lock_irqsave(&info->lock, flags);
fcc8ac18 2471 if (onoff)
9fe8074b 2472 info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
fcc8ac18 2473 else
9fe8074b 2474 info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
eeb46134 2475 set_signals(info);
3d553993 2476 spin_unlock_irqrestore(&info->lock, flags);
1da177e4
LT
2477}
2478
eeb46134 2479
1da177e4
LT
2480static int mgslpc_open(struct tty_struct *tty, struct file * filp)
2481{
2482 MGSLPC_INFO *info;
eeb46134 2483 struct tty_port *port;
3d553993
AK
2484 int retval, line;
2485 unsigned long flags;
1da177e4 2486
d12341f9 2487 /* verify range of specified line number */
1da177e4 2488 line = tty->index;
410235fd 2489 if (line >= mgslpc_device_count) {
1da177e4 2490 printk("%s(%d):mgslpc_open with invalid line #%d.\n",
3d553993 2491 __FILE__, __LINE__, line);
1da177e4
LT
2492 return -ENODEV;
2493 }
2494
2495 /* find the info structure for the specified line */
2496 info = mgslpc_device_list;
2497 while(info && info->line != line)
2498 info = info->next_device;
2499 if (mgslpc_paranoia_check(info, tty->name, "mgslpc_open"))
2500 return -ENODEV;
d12341f9 2501
eeb46134 2502 port = &info->port;
1da177e4 2503 tty->driver_data = info;
eeb46134 2504 tty_port_tty_set(port, tty);
d12341f9 2505
1da177e4
LT
2506 if (debug_level >= DEBUG_LEVEL_INFO)
2507 printk("%s(%d):mgslpc_open(%s), old ref count = %d\n",
3d553993 2508 __FILE__, __LINE__, tty->driver->name, port->count);
1da177e4
LT
2509
2510 /* If port is closing, signal caller to try again */
e359a4e3 2511 if (port->flags & ASYNC_CLOSING){
b8c98ae4
AB
2512 wait_event_interruptible_tty(tty, port->close_wait,
2513 !(port->flags & ASYNC_CLOSING));
eeb46134 2514 retval = ((port->flags & ASYNC_HUP_NOTIFY) ?
1da177e4
LT
2515 -EAGAIN : -ERESTARTSYS);
2516 goto cleanup;
2517 }
d12341f9 2518
d6c53c0e 2519 port->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
1da177e4
LT
2520
2521 spin_lock_irqsave(&info->netlock, flags);
2522 if (info->netcount) {
2523 retval = -EBUSY;
2524 spin_unlock_irqrestore(&info->netlock, flags);
2525 goto cleanup;
2526 }
eeb46134
AC
2527 spin_lock(&port->lock);
2528 port->count++;
2529 spin_unlock(&port->lock);
1da177e4
LT
2530 spin_unlock_irqrestore(&info->netlock, flags);
2531
eeb46134 2532 if (port->count == 1) {
1da177e4 2533 /* 1st open on this device, init hardware */
eeb46134 2534 retval = startup(info, tty);
1da177e4
LT
2535 if (retval < 0)
2536 goto cleanup;
2537 }
2538
eeb46134 2539 retval = tty_port_block_til_ready(&info->port, tty, filp);
1da177e4
LT
2540 if (retval) {
2541 if (debug_level >= DEBUG_LEVEL_INFO)
2542 printk("%s(%d):block_til_ready(%s) returned %d\n",
3d553993 2543 __FILE__, __LINE__, info->device_name, retval);
1da177e4
LT
2544 goto cleanup;
2545 }
2546
2547 if (debug_level >= DEBUG_LEVEL_INFO)
2548 printk("%s(%d):mgslpc_open(%s) success\n",
3d553993 2549 __FILE__, __LINE__, info->device_name);
1da177e4 2550 retval = 0;
d12341f9
JG
2551
2552cleanup:
1da177e4
LT
2553 return retval;
2554}
2555
2556/*
2557 * /proc fs routines....
2558 */
2559
87687144 2560static inline void line_info(struct seq_file *m, MGSLPC_INFO *info)
1da177e4
LT
2561{
2562 char stat_buf[30];
1da177e4
LT
2563 unsigned long flags;
2564
87687144 2565 seq_printf(m, "%s:io:%04X irq:%d",
1da177e4
LT
2566 info->device_name, info->io_base, info->irq_level);
2567
2568 /* output current serial signal states */
3d553993
AK
2569 spin_lock_irqsave(&info->lock, flags);
2570 get_signals(info);
2571 spin_unlock_irqrestore(&info->lock, flags);
d12341f9 2572
1da177e4
LT
2573 stat_buf[0] = 0;
2574 stat_buf[1] = 0;
2575 if (info->serial_signals & SerialSignal_RTS)
2576 strcat(stat_buf, "|RTS");
2577 if (info->serial_signals & SerialSignal_CTS)
2578 strcat(stat_buf, "|CTS");
2579 if (info->serial_signals & SerialSignal_DTR)
2580 strcat(stat_buf, "|DTR");
2581 if (info->serial_signals & SerialSignal_DSR)
2582 strcat(stat_buf, "|DSR");
2583 if (info->serial_signals & SerialSignal_DCD)
2584 strcat(stat_buf, "|CD");
2585 if (info->serial_signals & SerialSignal_RI)
2586 strcat(stat_buf, "|RI");
2587
2588 if (info->params.mode == MGSL_MODE_HDLC) {
87687144 2589 seq_printf(m, " HDLC txok:%d rxok:%d",
1da177e4
LT
2590 info->icount.txok, info->icount.rxok);
2591 if (info->icount.txunder)
87687144 2592 seq_printf(m, " txunder:%d", info->icount.txunder);
1da177e4 2593 if (info->icount.txabort)
87687144 2594 seq_printf(m, " txabort:%d", info->icount.txabort);
1da177e4 2595 if (info->icount.rxshort)
87687144 2596 seq_printf(m, " rxshort:%d", info->icount.rxshort);
1da177e4 2597 if (info->icount.rxlong)
87687144 2598 seq_printf(m, " rxlong:%d", info->icount.rxlong);
1da177e4 2599 if (info->icount.rxover)
87687144 2600 seq_printf(m, " rxover:%d", info->icount.rxover);
1da177e4 2601 if (info->icount.rxcrc)
87687144 2602 seq_printf(m, " rxcrc:%d", info->icount.rxcrc);
1da177e4 2603 } else {
87687144 2604 seq_printf(m, " ASYNC tx:%d rx:%d",
1da177e4
LT
2605 info->icount.tx, info->icount.rx);
2606 if (info->icount.frame)
87687144 2607 seq_printf(m, " fe:%d", info->icount.frame);
1da177e4 2608 if (info->icount.parity)
87687144 2609 seq_printf(m, " pe:%d", info->icount.parity);
1da177e4 2610 if (info->icount.brk)
87687144 2611 seq_printf(m, " brk:%d", info->icount.brk);
1da177e4 2612 if (info->icount.overrun)
87687144 2613 seq_printf(m, " oe:%d", info->icount.overrun);
1da177e4 2614 }
d12341f9 2615
1da177e4 2616 /* Append serial signal status to end */
87687144 2617 seq_printf(m, " %s\n", stat_buf+1);
d12341f9 2618
87687144 2619 seq_printf(m, "txactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
1da177e4
LT
2620 info->tx_active,info->bh_requested,info->bh_running,
2621 info->pending_bh);
1da177e4
LT
2622}
2623
2624/* Called to print information about devices
2625 */
87687144 2626static int mgslpc_proc_show(struct seq_file *m, void *v)
1da177e4 2627{
1da177e4 2628 MGSLPC_INFO *info;
d12341f9 2629
87687144 2630 seq_printf(m, "synclink driver:%s\n", driver_version);
d12341f9 2631
1da177e4 2632 info = mgslpc_device_list;
3d553993 2633 while (info) {
87687144 2634 line_info(m, info);
1da177e4
LT
2635 info = info->next_device;
2636 }
87687144
AD
2637 return 0;
2638}
1da177e4 2639
87687144
AD
2640static int mgslpc_proc_open(struct inode *inode, struct file *file)
2641{
2642 return single_open(file, mgslpc_proc_show, NULL);
1da177e4
LT
2643}
2644
87687144
AD
2645static const struct file_operations mgslpc_proc_fops = {
2646 .owner = THIS_MODULE,
2647 .open = mgslpc_proc_open,
2648 .read = seq_read,
2649 .llseek = seq_lseek,
2650 .release = single_release,
2651};
2652
cdaad343 2653static int rx_alloc_buffers(MGSLPC_INFO *info)
1da177e4
LT
2654{
2655 /* each buffer has header and data */
2656 info->rx_buf_size = sizeof(RXBUF) + info->max_frame_size;
2657
2658 /* calculate total allocation size for 8 buffers */
2659 info->rx_buf_total_size = info->rx_buf_size * 8;
2660
2661 /* limit total allocated memory */
2662 if (info->rx_buf_total_size > 0x10000)
2663 info->rx_buf_total_size = 0x10000;
2664
2665 /* calculate number of buffers */
2666 info->rx_buf_count = info->rx_buf_total_size / info->rx_buf_size;
2667
2668 info->rx_buf = kmalloc(info->rx_buf_total_size, GFP_KERNEL);
2669 if (info->rx_buf == NULL)
2670 return -ENOMEM;
2671
a6b68a69
PF
2672 /* unused flag buffer to satisfy receive_buf calling interface */
2673 info->flag_buf = kzalloc(info->max_frame_size, GFP_KERNEL);
2674 if (!info->flag_buf) {
2675 kfree(info->rx_buf);
2676 info->rx_buf = NULL;
2677 return -ENOMEM;
2678 }
2679
1da177e4
LT
2680 rx_reset_buffers(info);
2681 return 0;
2682}
2683
cdaad343 2684static void rx_free_buffers(MGSLPC_INFO *info)
1da177e4 2685{
735d5661 2686 kfree(info->rx_buf);
1da177e4 2687 info->rx_buf = NULL;
a6b68a69
PF
2688 kfree(info->flag_buf);
2689 info->flag_buf = NULL;
1da177e4
LT
2690}
2691
cdaad343 2692static int claim_resources(MGSLPC_INFO *info)
1da177e4 2693{
3d553993
AK
2694 if (rx_alloc_buffers(info) < 0) {
2695 printk("Can't allocate rx buffer %s\n", info->device_name);
1da177e4
LT
2696 release_resources(info);
2697 return -ENODEV;
d12341f9 2698 }
1da177e4
LT
2699 return 0;
2700}
2701
cdaad343 2702static void release_resources(MGSLPC_INFO *info)
1da177e4
LT
2703{
2704 if (debug_level >= DEBUG_LEVEL_INFO)
2705 printk("release_resources(%s)\n", info->device_name);
2706 rx_free_buffers(info);
2707}
2708
2709/* Add the specified device instance data structure to the
2710 * global linked list of devices and increment the device count.
d12341f9 2711 *
1da177e4
LT
2712 * Arguments: info pointer to device instance data
2713 */
d34138d0 2714static int mgslpc_add_device(MGSLPC_INFO *info)
1da177e4 2715{
d34138d0
AK
2716 MGSLPC_INFO *current_dev = NULL;
2717 struct device *tty_dev;
2718 int ret;
2719
1da177e4
LT
2720 info->next_device = NULL;
2721 info->line = mgslpc_device_count;
2722 sprintf(info->device_name,"ttySLP%d",info->line);
d12341f9 2723
1da177e4
LT
2724 if (info->line < MAX_DEVICE_COUNT) {
2725 if (maxframe[info->line])
2726 info->max_frame_size = maxframe[info->line];
1da177e4
LT
2727 }
2728
2729 mgslpc_device_count++;
d12341f9 2730
1da177e4
LT
2731 if (!mgslpc_device_list)
2732 mgslpc_device_list = info;
d12341f9 2733 else {
d34138d0 2734 current_dev = mgslpc_device_list;
3d553993 2735 while (current_dev->next_device)
1da177e4
LT
2736 current_dev = current_dev->next_device;
2737 current_dev->next_device = info;
2738 }
d12341f9 2739
1da177e4
LT
2740 if (info->max_frame_size < 4096)
2741 info->max_frame_size = 4096;
2742 else if (info->max_frame_size > 65535)
2743 info->max_frame_size = 65535;
d12341f9 2744
3d553993 2745 printk("SyncLink PC Card %s:IO=%04X IRQ=%d\n",
1da177e4
LT
2746 info->device_name, info->io_base, info->irq_level);
2747
af69c7f9 2748#if SYNCLINK_GENERIC_HDLC
d34138d0
AK
2749 ret = hdlcdev_init(info);
2750 if (ret != 0)
2751 goto failed;
1da177e4 2752#endif
d34138d0
AK
2753
2754 tty_dev = tty_port_register_device(&info->port, serial_driver, info->line,
a33ba827 2755 &info->p_dev->dev);
d34138d0
AK
2756 if (IS_ERR(tty_dev)) {
2757 ret = PTR_ERR(tty_dev);
2758#if SYNCLINK_GENERIC_HDLC
2759 hdlcdev_exit(info);
2760#endif
2761 goto failed;
2762 }
2763
2764 return 0;
2765
2766failed:
2767 if (current_dev)
2768 current_dev->next_device = NULL;
2769 else
2770 mgslpc_device_list = NULL;
2771 mgslpc_device_count--;
2772 return ret;
1da177e4
LT
2773}
2774
cdaad343 2775static void mgslpc_remove_device(MGSLPC_INFO *remove_info)
1da177e4
LT
2776{
2777 MGSLPC_INFO *info = mgslpc_device_list;
2778 MGSLPC_INFO *last = NULL;
2779
2780 while(info) {
2781 if (info == remove_info) {
2782 if (last)
2783 last->next_device = info->next_device;
2784 else
2785 mgslpc_device_list = info->next_device;
16a1065f 2786 tty_unregister_device(serial_driver, info->line);
af69c7f9 2787#if SYNCLINK_GENERIC_HDLC
1da177e4
LT
2788 hdlcdev_exit(info);
2789#endif
2790 release_resources(info);
191c5f10 2791 tty_port_destroy(&info->port);
1da177e4
LT
2792 kfree(info);
2793 mgslpc_device_count--;
2794 return;
2795 }
2796 last = info;
2797 info = info->next_device;
2798 }
2799}
2800
25f8f54f 2801static const struct pcmcia_device_id mgslpc_ids[] = {
4af48c8c
DB
2802 PCMCIA_DEVICE_MANF_CARD(0x02c5, 0x0050),
2803 PCMCIA_DEVICE_NULL
2804};
2805MODULE_DEVICE_TABLE(pcmcia, mgslpc_ids);
2806
1da177e4
LT
2807static struct pcmcia_driver mgslpc_driver = {
2808 .owner = THIS_MODULE,
2e9b981a 2809 .name = "synclink_cs",
15b99ac1 2810 .probe = mgslpc_probe,
cc3b4866 2811 .remove = mgslpc_detach,
4af48c8c 2812 .id_table = mgslpc_ids,
98e4c28b
DB
2813 .suspend = mgslpc_suspend,
2814 .resume = mgslpc_resume,
1da177e4
LT
2815};
2816
b68e31d0 2817static const struct tty_operations mgslpc_ops = {
1da177e4
LT
2818 .open = mgslpc_open,
2819 .close = mgslpc_close,
2820 .write = mgslpc_write,
2821 .put_char = mgslpc_put_char,
2822 .flush_chars = mgslpc_flush_chars,
2823 .write_room = mgslpc_write_room,
2824 .chars_in_buffer = mgslpc_chars_in_buffer,
2825 .flush_buffer = mgslpc_flush_buffer,
2826 .ioctl = mgslpc_ioctl,
2827 .throttle = mgslpc_throttle,
2828 .unthrottle = mgslpc_unthrottle,
2829 .send_xchar = mgslpc_send_xchar,
2830 .break_ctl = mgslpc_break,
2831 .wait_until_sent = mgslpc_wait_until_sent,
1da177e4
LT
2832 .set_termios = mgslpc_set_termios,
2833 .stop = tx_pause,
2834 .start = tx_release,
2835 .hangup = mgslpc_hangup,
2836 .tiocmget = tiocmget,
2837 .tiocmset = tiocmset,
dc98d965 2838 .get_icount = mgslpc_get_icount,
87687144 2839 .proc_fops = &mgslpc_proc_fops,
1da177e4
LT
2840};
2841
1da177e4 2842static int __init synclink_cs_init(void)
1da177e4
LT
2843{
2844 int rc;
2845
cc93441e
JS
2846 if (break_on_load) {
2847 mgslpc_get_text_ptr();
2848 BREAKPOINT();
1da177e4
LT
2849 }
2850
cc93441e
JS
2851 serial_driver = tty_alloc_driver(MAX_DEVICE_COUNT,
2852 TTY_DRIVER_REAL_RAW |
2853 TTY_DRIVER_DYNAMIC_DEV);
c3a6344a
DC
2854 if (IS_ERR(serial_driver)) {
2855 rc = PTR_ERR(serial_driver);
cc93441e
JS
2856 goto err;
2857 }
1da177e4 2858
cc93441e
JS
2859 /* Initialize the tty_driver structure */
2860 serial_driver->driver_name = "synclink_cs";
2861 serial_driver->name = "ttySLP";
2862 serial_driver->major = ttymajor;
2863 serial_driver->minor_start = 64;
2864 serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
2865 serial_driver->subtype = SERIAL_TYPE_NORMAL;
2866 serial_driver->init_termios = tty_std_termios;
2867 serial_driver->init_termios.c_cflag =
2868 B9600 | CS8 | CREAD | HUPCL | CLOCAL;
2869 tty_set_operations(serial_driver, &mgslpc_ops);
1da177e4 2870
cc93441e
JS
2871 rc = tty_register_driver(serial_driver);
2872 if (rc < 0) {
2873 printk(KERN_ERR "%s(%d):Couldn't register serial driver\n",
2874 __FILE__, __LINE__);
2875 goto err_put_tty;
2876 }
1da177e4 2877
16a1065f
JS
2878 rc = pcmcia_register_driver(&mgslpc_driver);
2879 if (rc < 0)
2880 goto err_unreg_tty;
d12341f9 2881
cc93441e
JS
2882 printk(KERN_INFO "%s %s, tty major#%d\n", driver_name, driver_version,
2883 serial_driver->major);
d12341f9 2884
737586fe 2885 return 0;
16a1065f
JS
2886err_unreg_tty:
2887 tty_unregister_driver(serial_driver);
737586fe
JS
2888err_put_tty:
2889 put_tty_driver(serial_driver);
16a1065f 2890err:
737586fe 2891 return rc;
1da177e4
LT
2892}
2893
d12341f9 2894static void __exit synclink_cs_exit(void)
1da177e4 2895{
16a1065f 2896 pcmcia_unregister_driver(&mgslpc_driver);
737586fe
JS
2897 tty_unregister_driver(serial_driver);
2898 put_tty_driver(serial_driver);
1da177e4
LT
2899}
2900
2901module_init(synclink_cs_init);
2902module_exit(synclink_cs_exit);
2903
2904static void mgslpc_set_rate(MGSLPC_INFO *info, unsigned char channel, unsigned int rate)
2905{
2906 unsigned int M, N;
2907 unsigned char val;
2908
d12341f9
JG
2909 /* note:standard BRG mode is broken in V3.2 chip
2910 * so enhanced mode is always used
1da177e4
LT
2911 */
2912
2913 if (rate) {
2914 N = 3686400 / rate;
2915 if (!N)
2916 N = 1;
2917 N >>= 1;
2918 for (M = 1; N > 64 && M < 16; M++)
2919 N >>= 1;
2920 N--;
2921
2922 /* BGR[5..0] = N
2923 * BGR[9..6] = M
2924 * BGR[7..0] contained in BGR register
2925 * BGR[9..8] contained in CCR2[7..6]
2926 * divisor = (N+1)*2^M
2927 *
2928 * Note: M *must* not be zero (causes asymetric duty cycle)
d12341f9 2929 */
1da177e4
LT
2930 write_reg(info, (unsigned char) (channel + BGR),
2931 (unsigned char) ((M << 6) + N));
2932 val = read_reg(info, (unsigned char) (channel + CCR2)) & 0x3f;
2933 val |= ((M << 4) & 0xc0);
2934 write_reg(info, (unsigned char) (channel + CCR2), val);
2935 }
2936}
2937
2938/* Enabled the AUX clock output at the specified frequency.
2939 */
2940static void enable_auxclk(MGSLPC_INFO *info)
2941{
2942 unsigned char val;
d12341f9 2943
1da177e4
LT
2944 /* MODE
2945 *
2946 * 07..06 MDS[1..0] 10 = transparent HDLC mode
2947 * 05 ADM Address Mode, 0 = no addr recognition
2948 * 04 TMD Timer Mode, 0 = external
2949 * 03 RAC Receiver Active, 0 = inactive
2950 * 02 RTS 0=RTS active during xmit, 1=RTS always active
2951 * 01 TRS Timer Resolution, 1=512
2952 * 00 TLP Test Loop, 0 = no loop
2953 *
2954 * 1000 0010
d12341f9 2955 */
1da177e4 2956 val = 0x82;
d12341f9
JG
2957
2958 /* channel B RTS is used to enable AUXCLK driver on SP505 */
1da177e4
LT
2959 if (info->params.mode == MGSL_MODE_HDLC && info->params.clock_speed)
2960 val |= BIT2;
2961 write_reg(info, CHB + MODE, val);
d12341f9 2962
1da177e4
LT
2963 /* CCR0
2964 *
2965 * 07 PU Power Up, 1=active, 0=power down
2966 * 06 MCE Master Clock Enable, 1=enabled
2967 * 05 Reserved, 0
2968 * 04..02 SC[2..0] Encoding
2969 * 01..00 SM[1..0] Serial Mode, 00=HDLC
2970 *
2971 * 11000000
d12341f9 2972 */
1da177e4 2973 write_reg(info, CHB + CCR0, 0xc0);
d12341f9 2974
1da177e4
LT
2975 /* CCR1
2976 *
2977 * 07 SFLG Shared Flag, 0 = disable shared flags
2978 * 06 GALP Go Active On Loop, 0 = not used
2979 * 05 GLP Go On Loop, 0 = not used
2980 * 04 ODS Output Driver Select, 1=TxD is push-pull output
2981 * 03 ITF Interframe Time Fill, 0=mark, 1=flag
2982 * 02..00 CM[2..0] Clock Mode
2983 *
2984 * 0001 0111
d12341f9 2985 */
1da177e4 2986 write_reg(info, CHB + CCR1, 0x17);
d12341f9 2987
1da177e4
LT
2988 /* CCR2 (Channel B)
2989 *
2990 * 07..06 BGR[9..8] Baud rate bits 9..8
2991 * 05 BDF Baud rate divisor factor, 0=1, 1=BGR value
2992 * 04 SSEL Clock source select, 1=submode b
2993 * 03 TOE 0=TxCLK is input, 1=TxCLK is output
2994 * 02 RWX Read/Write Exchange 0=disabled
2995 * 01 C32, CRC select, 0=CRC-16, 1=CRC-32
2996 * 00 DIV, data inversion 0=disabled, 1=enabled
2997 *
2998 * 0011 1000
d12341f9 2999 */
1da177e4
LT
3000 if (info->params.mode == MGSL_MODE_HDLC && info->params.clock_speed)
3001 write_reg(info, CHB + CCR2, 0x38);
3002 else
3003 write_reg(info, CHB + CCR2, 0x30);
d12341f9 3004
1da177e4
LT
3005 /* CCR4
3006 *
3007 * 07 MCK4 Master Clock Divide by 4, 1=enabled
3008 * 06 EBRG Enhanced Baud Rate Generator Mode, 1=enabled
3009 * 05 TST1 Test Pin, 0=normal operation
3010 * 04 ICD Ivert Carrier Detect, 1=enabled (active low)
3011 * 03..02 Reserved, must be 0
3012 * 01..00 RFT[1..0] RxFIFO Threshold 00=32 bytes
3013 *
3014 * 0101 0000
d12341f9 3015 */
1da177e4 3016 write_reg(info, CHB + CCR4, 0x50);
d12341f9 3017
1da177e4
LT
3018 /* if auxclk not enabled, set internal BRG so
3019 * CTS transitions can be detected (requires TxC)
d12341f9 3020 */
1da177e4
LT
3021 if (info->params.mode == MGSL_MODE_HDLC && info->params.clock_speed)
3022 mgslpc_set_rate(info, CHB, info->params.clock_speed);
3023 else
3024 mgslpc_set_rate(info, CHB, 921600);
3025}
3026
d12341f9 3027static void loopback_enable(MGSLPC_INFO *info)
1da177e4
LT
3028{
3029 unsigned char val;
d12341f9
JG
3030
3031 /* CCR1:02..00 CM[2..0] Clock Mode = 111 (clock mode 7) */
ecda040f 3032 val = read_reg(info, CHA + CCR1) | (BIT2 | BIT1 | BIT0);
1da177e4 3033 write_reg(info, CHA + CCR1, val);
d12341f9
JG
3034
3035 /* CCR2:04 SSEL Clock source select, 1=submode b */
ecda040f 3036 val = read_reg(info, CHA + CCR2) | (BIT4 | BIT5);
1da177e4 3037 write_reg(info, CHA + CCR2, val);
d12341f9
JG
3038
3039 /* set LinkSpeed if available, otherwise default to 2Mbps */
1da177e4
LT
3040 if (info->params.clock_speed)
3041 mgslpc_set_rate(info, CHA, info->params.clock_speed);
3042 else
3043 mgslpc_set_rate(info, CHA, 1843200);
d12341f9
JG
3044
3045 /* MODE:00 TLP Test Loop, 1=loopback enabled */
1da177e4
LT
3046 val = read_reg(info, CHA + MODE) | BIT0;
3047 write_reg(info, CHA + MODE, val);
3048}
3049
cdaad343 3050static void hdlc_mode(MGSLPC_INFO *info)
1da177e4
LT
3051{
3052 unsigned char val;
3053 unsigned char clkmode, clksubmode;
3054
d12341f9 3055 /* disable all interrupts */
1da177e4
LT
3056 irq_disable(info, CHA, 0xffff);
3057 irq_disable(info, CHB, 0xffff);
3058 port_irq_disable(info, 0xff);
d12341f9
JG
3059
3060 /* assume clock mode 0a, rcv=RxC xmt=TxC */
1da177e4
LT
3061 clkmode = clksubmode = 0;
3062 if (info->params.flags & HDLC_FLAG_RXC_DPLL
3063 && info->params.flags & HDLC_FLAG_TXC_DPLL) {
d12341f9 3064 /* clock mode 7a, rcv = DPLL, xmt = DPLL */
1da177e4
LT
3065 clkmode = 7;
3066 } else if (info->params.flags & HDLC_FLAG_RXC_BRG
3067 && info->params.flags & HDLC_FLAG_TXC_BRG) {
d12341f9 3068 /* clock mode 7b, rcv = BRG, xmt = BRG */
1da177e4
LT
3069 clkmode = 7;
3070 clksubmode = 1;
3071 } else if (info->params.flags & HDLC_FLAG_RXC_DPLL) {
3072 if (info->params.flags & HDLC_FLAG_TXC_BRG) {
d12341f9 3073 /* clock mode 6b, rcv = DPLL, xmt = BRG/16 */
1da177e4
LT
3074 clkmode = 6;
3075 clksubmode = 1;
3076 } else {
d12341f9 3077 /* clock mode 6a, rcv = DPLL, xmt = TxC */
1da177e4
LT
3078 clkmode = 6;
3079 }
3080 } else if (info->params.flags & HDLC_FLAG_TXC_BRG) {
d12341f9 3081 /* clock mode 0b, rcv = RxC, xmt = BRG */
1da177e4
LT
3082 clksubmode = 1;
3083 }
d12341f9 3084
1da177e4
LT
3085 /* MODE
3086 *
3087 * 07..06 MDS[1..0] 10 = transparent HDLC mode
3088 * 05 ADM Address Mode, 0 = no addr recognition
3089 * 04 TMD Timer Mode, 0 = external
3090 * 03 RAC Receiver Active, 0 = inactive
3091 * 02 RTS 0=RTS active during xmit, 1=RTS always active
3092 * 01 TRS Timer Resolution, 1=512
3093 * 00 TLP Test Loop, 0 = no loop
3094 *
3095 * 1000 0010
d12341f9 3096 */
1da177e4
LT
3097 val = 0x82;
3098 if (info->params.loopback)
3099 val |= BIT0;
d12341f9
JG
3100
3101 /* preserve RTS state */
1da177e4
LT
3102 if (info->serial_signals & SerialSignal_RTS)
3103 val |= BIT2;
3104 write_reg(info, CHA + MODE, val);
d12341f9 3105
1da177e4
LT
3106 /* CCR0
3107 *
3108 * 07 PU Power Up, 1=active, 0=power down
3109 * 06 MCE Master Clock Enable, 1=enabled
3110 * 05 Reserved, 0
3111 * 04..02 SC[2..0] Encoding
3112 * 01..00 SM[1..0] Serial Mode, 00=HDLC
3113 *
3114 * 11000000
d12341f9 3115 */
1da177e4
LT
3116 val = 0xc0;
3117 switch (info->params.encoding)
3118 {
3119 case HDLC_ENCODING_NRZI:
3120 val |= BIT3;
3121 break;
3122 case HDLC_ENCODING_BIPHASE_SPACE:
3123 val |= BIT4;
3124 break; // FM0
3125 case HDLC_ENCODING_BIPHASE_MARK:
ecda040f 3126 val |= BIT4 | BIT2;
1da177e4
LT
3127 break; // FM1
3128 case HDLC_ENCODING_BIPHASE_LEVEL:
ecda040f 3129 val |= BIT4 | BIT3;
1da177e4
LT
3130 break; // Manchester
3131 }
3132 write_reg(info, CHA + CCR0, val);
d12341f9 3133
1da177e4
LT
3134 /* CCR1
3135 *
3136 * 07 SFLG Shared Flag, 0 = disable shared flags
3137 * 06 GALP Go Active On Loop, 0 = not used
3138 * 05 GLP Go On Loop, 0 = not used
3139 * 04 ODS Output Driver Select, 1=TxD is push-pull output
3140 * 03 ITF Interframe Time Fill, 0=mark, 1=flag
3141 * 02..00 CM[2..0] Clock Mode
3142 *
3143 * 0001 0000
d12341f9 3144 */
1da177e4
LT
3145 val = 0x10 + clkmode;
3146 write_reg(info, CHA + CCR1, val);
d12341f9 3147
1da177e4
LT
3148 /* CCR2
3149 *
3150 * 07..06 BGR[9..8] Baud rate bits 9..8
3151 * 05 BDF Baud rate divisor factor, 0=1, 1=BGR value
3152 * 04 SSEL Clock source select, 1=submode b
3153 * 03 TOE 0=TxCLK is input, 0=TxCLK is input
3154 * 02 RWX Read/Write Exchange 0=disabled
3155 * 01 C32, CRC select, 0=CRC-16, 1=CRC-32
3156 * 00 DIV, data inversion 0=disabled, 1=enabled
3157 *
3158 * 0000 0000
d12341f9 3159 */
1da177e4
LT
3160 val = 0x00;
3161 if (clkmode == 2 || clkmode == 3 || clkmode == 6
3162 || clkmode == 7 || (clkmode == 0 && clksubmode == 1))
3163 val |= BIT5;
3164 if (clksubmode)
3165 val |= BIT4;
3166 if (info->params.crc_type == HDLC_CRC_32_CCITT)
3167 val |= BIT1;
3168 if (info->params.encoding == HDLC_ENCODING_NRZB)
3169 val |= BIT0;
3170 write_reg(info, CHA + CCR2, val);
d12341f9 3171
1da177e4
LT
3172 /* CCR3
3173 *
3174 * 07..06 PRE[1..0] Preamble count 00=1, 01=2, 10=4, 11=8
3175 * 05 EPT Enable preamble transmission, 1=enabled
3176 * 04 RADD Receive address pushed to FIFO, 0=disabled
3177 * 03 CRL CRC Reset Level, 0=FFFF
3178 * 02 RCRC Rx CRC 0=On 1=Off
3179 * 01 TCRC Tx CRC 0=On 1=Off
3180 * 00 PSD DPLL Phase Shift Disable
3181 *
3182 * 0000 0000
d12341f9 3183 */
1da177e4
LT
3184 val = 0x00;
3185 if (info->params.crc_type == HDLC_CRC_NONE)
ecda040f 3186 val |= BIT2 | BIT1;
1da177e4
LT
3187 if (info->params.preamble != HDLC_PREAMBLE_PATTERN_NONE)
3188 val |= BIT5;
3189 switch (info->params.preamble_length)
3190 {
3191 case HDLC_PREAMBLE_LENGTH_16BITS:
3192 val |= BIT6;
3193 break;
3194 case HDLC_PREAMBLE_LENGTH_32BITS:
3195 val |= BIT6;
3196 break;
3197 case HDLC_PREAMBLE_LENGTH_64BITS:
ecda040f 3198 val |= BIT7 | BIT6;
1da177e4
LT
3199 break;
3200 }
3201 write_reg(info, CHA + CCR3, val);
d12341f9
JG
3202
3203 /* PRE - Preamble pattern */
1da177e4
LT
3204 val = 0;
3205 switch (info->params.preamble)
3206 {
3207 case HDLC_PREAMBLE_PATTERN_FLAGS: val = 0x7e; break;
3208 case HDLC_PREAMBLE_PATTERN_10: val = 0xaa; break;
3209 case HDLC_PREAMBLE_PATTERN_01: val = 0x55; break;
3210 case HDLC_PREAMBLE_PATTERN_ONES: val = 0xff; break;
3211 }
3212 write_reg(info, CHA + PRE, val);
d12341f9 3213
1da177e4
LT
3214 /* CCR4
3215 *
3216 * 07 MCK4 Master Clock Divide by 4, 1=enabled
3217 * 06 EBRG Enhanced Baud Rate Generator Mode, 1=enabled
3218 * 05 TST1 Test Pin, 0=normal operation
3219 * 04 ICD Ivert Carrier Detect, 1=enabled (active low)
3220 * 03..02 Reserved, must be 0
3221 * 01..00 RFT[1..0] RxFIFO Threshold 00=32 bytes
3222 *
3223 * 0101 0000
d12341f9 3224 */
1da177e4
LT
3225 val = 0x50;
3226 write_reg(info, CHA + CCR4, val);
3227 if (info->params.flags & HDLC_FLAG_RXC_DPLL)
3228 mgslpc_set_rate(info, CHA, info->params.clock_speed * 16);
3229 else
3230 mgslpc_set_rate(info, CHA, info->params.clock_speed);
d12341f9 3231
1da177e4
LT
3232 /* RLCR Receive length check register
3233 *
3234 * 7 1=enable receive length check
3235 * 6..0 Max frame length = (RL + 1) * 32
d12341f9 3236 */
1da177e4 3237 write_reg(info, CHA + RLCR, 0);
d12341f9 3238
1da177e4
LT
3239 /* XBCH Transmit Byte Count High
3240 *
3241 * 07 DMA mode, 0 = interrupt driven
3242 * 06 NRM, 0=ABM (ignored)
3243 * 05 CAS Carrier Auto Start
3244 * 04 XC Transmit Continuously (ignored)
3245 * 03..00 XBC[10..8] Transmit byte count bits 10..8
3246 *
3247 * 0000 0000
d12341f9 3248 */
1da177e4
LT
3249 val = 0x00;
3250 if (info->params.flags & HDLC_FLAG_AUTO_DCD)
3251 val |= BIT5;
3252 write_reg(info, CHA + XBCH, val);
3253 enable_auxclk(info);
3254 if (info->params.loopback || info->testing_irq)
3255 loopback_enable(info);
3256 if (info->params.flags & HDLC_FLAG_AUTO_CTS)
3257 {
3258 irq_enable(info, CHB, IRQ_CTS);
d12341f9 3259 /* PVR[3] 1=AUTO CTS active */
1da177e4
LT
3260 set_reg_bits(info, CHA + PVR, BIT3);
3261 } else
3262 clear_reg_bits(info, CHA + PVR, BIT3);
3263
3264 irq_enable(info, CHA,
ecda040f
AJ
3265 IRQ_RXEOM | IRQ_RXFIFO | IRQ_ALLSENT |
3266 IRQ_UNDERRUN | IRQ_TXFIFO);
1da177e4
LT
3267 issue_command(info, CHA, CMD_TXRESET + CMD_RXRESET);
3268 wait_command_complete(info, CHA);
3269 read_reg16(info, CHA + ISR); /* clear pending IRQs */
d12341f9 3270
1da177e4
LT
3271 /* Master clock mode enabled above to allow reset commands
3272 * to complete even if no data clocks are present.
3273 *
3274 * Disable master clock mode for normal communications because
3275 * V3.2 of the ESCC2 has a bug that prevents the transmit all sent
3276 * IRQ when in master clock mode.
3277 *
3278 * Leave master clock mode enabled for IRQ test because the
3279 * timer IRQ used by the test can only happen in master clock mode.
d12341f9 3280 */
1da177e4
LT
3281 if (!info->testing_irq)
3282 clear_reg_bits(info, CHA + CCR0, BIT6);
3283
3284 tx_set_idle(info);
3285
3286 tx_stop(info);
3287 rx_stop(info);
3288}
3289
cdaad343 3290static void rx_stop(MGSLPC_INFO *info)
1da177e4
LT
3291{
3292 if (debug_level >= DEBUG_LEVEL_ISR)
3293 printk("%s(%d):rx_stop(%s)\n",
3d553993 3294 __FILE__, __LINE__, info->device_name);
d12341f9
JG
3295
3296 /* MODE:03 RAC Receiver Active, 0=inactive */
1da177e4
LT
3297 clear_reg_bits(info, CHA + MODE, BIT3);
3298
0fab6de0
JP
3299 info->rx_enabled = false;
3300 info->rx_overflow = false;
1da177e4
LT
3301}
3302
cdaad343 3303static void rx_start(MGSLPC_INFO *info)
1da177e4
LT
3304{
3305 if (debug_level >= DEBUG_LEVEL_ISR)
3306 printk("%s(%d):rx_start(%s)\n",
3d553993 3307 __FILE__, __LINE__, info->device_name);
1da177e4
LT
3308
3309 rx_reset_buffers(info);
0fab6de0
JP
3310 info->rx_enabled = false;
3311 info->rx_overflow = false;
1da177e4 3312
d12341f9 3313 /* MODE:03 RAC Receiver Active, 1=active */
1da177e4
LT
3314 set_reg_bits(info, CHA + MODE, BIT3);
3315
0fab6de0 3316 info->rx_enabled = true;
1da177e4
LT
3317}
3318
eeb46134 3319static void tx_start(MGSLPC_INFO *info, struct tty_struct *tty)
1da177e4
LT
3320{
3321 if (debug_level >= DEBUG_LEVEL_ISR)
3322 printk("%s(%d):tx_start(%s)\n",
3d553993 3323 __FILE__, __LINE__, info->device_name);
d12341f9 3324
1da177e4
LT
3325 if (info->tx_count) {
3326 /* If auto RTS enabled and RTS is inactive, then assert */
3327 /* RTS and set a flag indicating that the driver should */
3328 /* negate RTS when the transmission completes. */
0fab6de0 3329 info->drop_rts_on_tx_done = false;
1da177e4
LT
3330
3331 if (info->params.flags & HDLC_FLAG_AUTO_RTS) {
3332 get_signals(info);
3333 if (!(info->serial_signals & SerialSignal_RTS)) {
3334 info->serial_signals |= SerialSignal_RTS;
3335 set_signals(info);
0fab6de0 3336 info->drop_rts_on_tx_done = true;
1da177e4
LT
3337 }
3338 }
3339
3340 if (info->params.mode == MGSL_MODE_ASYNC) {
3341 if (!info->tx_active) {
0fab6de0 3342 info->tx_active = true;
eeb46134 3343 tx_ready(info, tty);
1da177e4
LT
3344 }
3345 } else {
0fab6de0 3346 info->tx_active = true;
eeb46134 3347 tx_ready(info, tty);
40565f19
JS
3348 mod_timer(&info->tx_timer, jiffies +
3349 msecs_to_jiffies(5000));
1da177e4
LT
3350 }
3351 }
3352
3353 if (!info->tx_enabled)
0fab6de0 3354 info->tx_enabled = true;
1da177e4
LT
3355}
3356
cdaad343 3357static void tx_stop(MGSLPC_INFO *info)
1da177e4
LT
3358{
3359 if (debug_level >= DEBUG_LEVEL_ISR)
3360 printk("%s(%d):tx_stop(%s)\n",
3d553993 3361 __FILE__, __LINE__, info->device_name);
d12341f9
JG
3362
3363 del_timer(&info->tx_timer);
1da177e4 3364
0fab6de0
JP
3365 info->tx_enabled = false;
3366 info->tx_active = false;
1da177e4
LT
3367}
3368
3369/* Reset the adapter to a known state and prepare it for further use.
3370 */
cdaad343 3371static void reset_device(MGSLPC_INFO *info)
1da177e4 3372{
d12341f9 3373 /* power up both channels (set BIT7) */
1da177e4
LT
3374 write_reg(info, CHA + CCR0, 0x80);
3375 write_reg(info, CHB + CCR0, 0x80);
3376 write_reg(info, CHA + MODE, 0);
3377 write_reg(info, CHB + MODE, 0);
d12341f9
JG
3378
3379 /* disable all interrupts */
1da177e4
LT
3380 irq_disable(info, CHA, 0xffff);
3381 irq_disable(info, CHB, 0xffff);
3382 port_irq_disable(info, 0xff);
d12341f9 3383
1da177e4
LT
3384 /* PCR Port Configuration Register
3385 *
3386 * 07..04 DEC[3..0] Serial I/F select outputs
3387 * 03 output, 1=AUTO CTS control enabled
3388 * 02 RI Ring Indicator input 0=active
3389 * 01 DSR input 0=active
3390 * 00 DTR output 0=active
3391 *
3392 * 0000 0110
d12341f9 3393 */
1da177e4 3394 write_reg(info, PCR, 0x06);
d12341f9 3395
1da177e4
LT
3396 /* PVR Port Value Register
3397 *
3398 * 07..04 DEC[3..0] Serial I/F select (0000=disabled)
3399 * 03 AUTO CTS output 1=enabled
3400 * 02 RI Ring Indicator input
3401 * 01 DSR input
3402 * 00 DTR output (1=inactive)
3403 *
3404 * 0000 0001
3405 */
3406// write_reg(info, PVR, PVR_DTR);
d12341f9 3407
1da177e4
LT
3408 /* IPC Interrupt Port Configuration
3409 *
3410 * 07 VIS 1=Masked interrupts visible
3411 * 06..05 Reserved, 0
3412 * 04..03 SLA Slave address, 00 ignored
3413 * 02 CASM Cascading Mode, 1=daisy chain
3414 * 01..00 IC[1..0] Interrupt Config, 01=push-pull output, active low
3415 *
3416 * 0000 0101
d12341f9 3417 */
1da177e4
LT
3418 write_reg(info, IPC, 0x05);
3419}
3420
cdaad343 3421static void async_mode(MGSLPC_INFO *info)
1da177e4
LT
3422{
3423 unsigned char val;
3424
d12341f9 3425 /* disable all interrupts */
1da177e4
LT
3426 irq_disable(info, CHA, 0xffff);
3427 irq_disable(info, CHB, 0xffff);
3428 port_irq_disable(info, 0xff);
d12341f9 3429
1da177e4
LT
3430 /* MODE
3431 *
3432 * 07 Reserved, 0
3433 * 06 FRTS RTS State, 0=active
3434 * 05 FCTS Flow Control on CTS
3435 * 04 FLON Flow Control Enable
3436 * 03 RAC Receiver Active, 0 = inactive
3437 * 02 RTS 0=Auto RTS, 1=manual RTS
3438 * 01 TRS Timer Resolution, 1=512
3439 * 00 TLP Test Loop, 0 = no loop
3440 *
3441 * 0000 0110
d12341f9 3442 */
1da177e4
LT
3443 val = 0x06;
3444 if (info->params.loopback)
3445 val |= BIT0;
d12341f9
JG
3446
3447 /* preserve RTS state */
1da177e4
LT
3448 if (!(info->serial_signals & SerialSignal_RTS))
3449 val |= BIT6;
3450 write_reg(info, CHA + MODE, val);
d12341f9 3451
1da177e4
LT
3452 /* CCR0
3453 *
3454 * 07 PU Power Up, 1=active, 0=power down
3455 * 06 MCE Master Clock Enable, 1=enabled
3456 * 05 Reserved, 0
3457 * 04..02 SC[2..0] Encoding, 000=NRZ
3458 * 01..00 SM[1..0] Serial Mode, 11=Async
3459 *
3460 * 1000 0011
d12341f9 3461 */
1da177e4 3462 write_reg(info, CHA + CCR0, 0x83);
d12341f9 3463
1da177e4
LT
3464 /* CCR1
3465 *
3466 * 07..05 Reserved, 0
3467 * 04 ODS Output Driver Select, 1=TxD is push-pull output
3468 * 03 BCR Bit Clock Rate, 1=16x
3469 * 02..00 CM[2..0] Clock Mode, 111=BRG
3470 *
3471 * 0001 1111
d12341f9 3472 */
1da177e4 3473 write_reg(info, CHA + CCR1, 0x1f);
d12341f9 3474
1da177e4
LT
3475 /* CCR2 (channel A)
3476 *
3477 * 07..06 BGR[9..8] Baud rate bits 9..8
3478 * 05 BDF Baud rate divisor factor, 0=1, 1=BGR value
3479 * 04 SSEL Clock source select, 1=submode b
3480 * 03 TOE 0=TxCLK is input, 0=TxCLK is input
3481 * 02 RWX Read/Write Exchange 0=disabled
3482 * 01 Reserved, 0
3483 * 00 DIV, data inversion 0=disabled, 1=enabled
3484 *
3485 * 0001 0000
d12341f9 3486 */
1da177e4 3487 write_reg(info, CHA + CCR2, 0x10);
d12341f9 3488
1da177e4
LT
3489 /* CCR3
3490 *
3491 * 07..01 Reserved, 0
3492 * 00 PSD DPLL Phase Shift Disable
3493 *
3494 * 0000 0000
d12341f9 3495 */
1da177e4 3496 write_reg(info, CHA + CCR3, 0);
d12341f9 3497
1da177e4
LT
3498 /* CCR4
3499 *
3500 * 07 MCK4 Master Clock Divide by 4, 1=enabled
3501 * 06 EBRG Enhanced Baud Rate Generator Mode, 1=enabled
3502 * 05 TST1 Test Pin, 0=normal operation
3503 * 04 ICD Ivert Carrier Detect, 1=enabled (active low)
3504 * 03..00 Reserved, must be 0
3505 *
3506 * 0101 0000
d12341f9 3507 */
1da177e4
LT
3508 write_reg(info, CHA + CCR4, 0x50);
3509 mgslpc_set_rate(info, CHA, info->params.data_rate * 16);
d12341f9 3510
1da177e4
LT
3511 /* DAFO Data Format
3512 *
3513 * 07 Reserved, 0
3514 * 06 XBRK transmit break, 0=normal operation
3515 * 05 Stop bits (0=1, 1=2)
3516 * 04..03 PAR[1..0] Parity (01=odd, 10=even)
3517 * 02 PAREN Parity Enable
3518 * 01..00 CHL[1..0] Character Length (00=8, 01=7)
3519 *
d12341f9 3520 */
1da177e4
LT
3521 val = 0x00;
3522 if (info->params.data_bits != 8)
3523 val |= BIT0; /* 7 bits */
3524 if (info->params.stop_bits != 1)
3525 val |= BIT5;
3526 if (info->params.parity != ASYNC_PARITY_NONE)
3527 {
3528 val |= BIT2; /* Parity enable */
3529 if (info->params.parity == ASYNC_PARITY_ODD)
3530 val |= BIT3;
3531 else
3532 val |= BIT4;
3533 }
3534 write_reg(info, CHA + DAFO, val);
d12341f9 3535
1da177e4
LT
3536 /* RFC Rx FIFO Control
3537 *
3538 * 07 Reserved, 0
3539 * 06 DPS, 1=parity bit not stored in data byte
3540 * 05 DXS, 0=all data stored in FIFO (including XON/XOFF)
3541 * 04 RFDF Rx FIFO Data Format, 1=status byte stored in FIFO
3542 * 03..02 RFTH[1..0], rx threshold, 11=16 status + 16 data byte
3543 * 01 Reserved, 0
3544 * 00 TCDE Terminate Char Detect Enable, 0=disabled
3545 *
3546 * 0101 1100
d12341f9 3547 */
1da177e4 3548 write_reg(info, CHA + RFC, 0x5c);
d12341f9 3549
1da177e4
LT
3550 /* RLCR Receive length check register
3551 *
3552 * Max frame length = (RL + 1) * 32
d12341f9 3553 */
1da177e4 3554 write_reg(info, CHA + RLCR, 0);
d12341f9 3555
1da177e4
LT
3556 /* XBCH Transmit Byte Count High
3557 *
3558 * 07 DMA mode, 0 = interrupt driven
3559 * 06 NRM, 0=ABM (ignored)
3560 * 05 CAS Carrier Auto Start
3561 * 04 XC Transmit Continuously (ignored)
3562 * 03..00 XBC[10..8] Transmit byte count bits 10..8
3563 *
3564 * 0000 0000
d12341f9 3565 */
1da177e4
LT
3566 val = 0x00;
3567 if (info->params.flags & HDLC_FLAG_AUTO_DCD)
3568 val |= BIT5;
3569 write_reg(info, CHA + XBCH, val);
3570 if (info->params.flags & HDLC_FLAG_AUTO_CTS)
3571 irq_enable(info, CHA, IRQ_CTS);
d12341f9
JG
3572
3573 /* MODE:03 RAC Receiver Active, 1=active */
1da177e4
LT
3574 set_reg_bits(info, CHA + MODE, BIT3);
3575 enable_auxclk(info);
3576 if (info->params.flags & HDLC_FLAG_AUTO_CTS) {
3577 irq_enable(info, CHB, IRQ_CTS);
d12341f9 3578 /* PVR[3] 1=AUTO CTS active */
1da177e4
LT
3579 set_reg_bits(info, CHA + PVR, BIT3);
3580 } else
3581 clear_reg_bits(info, CHA + PVR, BIT3);
3582 irq_enable(info, CHA,
ecda040f
AJ
3583 IRQ_RXEOM | IRQ_RXFIFO | IRQ_BREAK_ON | IRQ_RXTIME |
3584 IRQ_ALLSENT | IRQ_TXFIFO);
1da177e4
LT
3585 issue_command(info, CHA, CMD_TXRESET + CMD_RXRESET);
3586 wait_command_complete(info, CHA);
3587 read_reg16(info, CHA + ISR); /* clear pending IRQs */
3588}
3589
3590/* Set the HDLC idle mode for the transmitter.
3591 */
cdaad343 3592static void tx_set_idle(MGSLPC_INFO *info)
1da177e4 3593{
d12341f9 3594 /* Note: ESCC2 only supports flags and one idle modes */
1da177e4
LT
3595 if (info->idle_mode == HDLC_TXIDLE_FLAGS)
3596 set_reg_bits(info, CHA + CCR1, BIT3);
3597 else
3598 clear_reg_bits(info, CHA + CCR1, BIT3);
3599}
3600
3601/* get state of the V24 status (input) signals.
3602 */
cdaad343 3603static void get_signals(MGSLPC_INFO *info)
1da177e4
LT
3604{
3605 unsigned char status = 0;
d12341f9 3606
9fe8074b
JP
3607 /* preserve RTS and DTR */
3608 info->serial_signals &= SerialSignal_RTS | SerialSignal_DTR;
1da177e4
LT
3609
3610 if (read_reg(info, CHB + VSTR) & BIT7)
3611 info->serial_signals |= SerialSignal_DCD;
3612 if (read_reg(info, CHB + STAR) & BIT1)
3613 info->serial_signals |= SerialSignal_CTS;
3614
3615 status = read_reg(info, CHA + PVR);
3616 if (!(status & PVR_RI))
3617 info->serial_signals |= SerialSignal_RI;
3618 if (!(status & PVR_DSR))
3619 info->serial_signals |= SerialSignal_DSR;
3620}
3621
9fe8074b 3622/* Set the state of RTS and DTR based on contents of
1da177e4
LT
3623 * serial_signals member of device extension.
3624 */
cdaad343 3625static void set_signals(MGSLPC_INFO *info)
1da177e4
LT
3626{
3627 unsigned char val;
3628
3629 val = read_reg(info, CHA + MODE);
3630 if (info->params.mode == MGSL_MODE_ASYNC) {
3631 if (info->serial_signals & SerialSignal_RTS)
3632 val &= ~BIT6;
3633 else
3634 val |= BIT6;
3635 } else {
3636 if (info->serial_signals & SerialSignal_RTS)
3637 val |= BIT2;
3638 else
3639 val &= ~BIT2;
3640 }
3641 write_reg(info, CHA + MODE, val);
3642
3643 if (info->serial_signals & SerialSignal_DTR)
3644 clear_reg_bits(info, CHA + PVR, PVR_DTR);
3645 else
3646 set_reg_bits(info, CHA + PVR, PVR_DTR);
3647}
3648
cdaad343 3649static void rx_reset_buffers(MGSLPC_INFO *info)
1da177e4
LT
3650{
3651 RXBUF *buf;
3652 int i;
3653
3654 info->rx_put = 0;
3655 info->rx_get = 0;
3656 info->rx_frame_count = 0;
3657 for (i=0 ; i < info->rx_buf_count ; i++) {
3658 buf = (RXBUF*)(info->rx_buf + (i * info->rx_buf_size));
3659 buf->status = buf->count = 0;
3660 }
3661}
3662
3663/* Attempt to return a received HDLC frame
3664 * Only frames received without errors are returned.
3665 *
0fab6de0 3666 * Returns true if frame returned, otherwise false
1da177e4 3667 */
eeb46134 3668static bool rx_get_frame(MGSLPC_INFO *info, struct tty_struct *tty)
1da177e4
LT
3669{
3670 unsigned short status;
3671 RXBUF *buf;
3672 unsigned int framesize = 0;
3673 unsigned long flags;
0fab6de0 3674 bool return_frame = false;
d12341f9 3675
1da177e4 3676 if (info->rx_frame_count == 0)
0fab6de0 3677 return false;
1da177e4
LT
3678
3679 buf = (RXBUF*)(info->rx_buf + (info->rx_get * info->rx_buf_size));
3680
3681 status = buf->status;
3682
3683 /* 07 VFR 1=valid frame
3684 * 06 RDO 1=data overrun
3685 * 05 CRC 1=OK, 0=error
3686 * 04 RAB 1=frame aborted
3687 */
3688 if ((status & 0xf0) != 0xA0) {
3689 if (!(status & BIT7) || (status & BIT4))
3690 info->icount.rxabort++;
3691 else if (status & BIT6)
3692 info->icount.rxover++;
3693 else if (!(status & BIT5)) {
3694 info->icount.rxcrc++;
3695 if (info->params.crc_type & HDLC_CRC_RETURN_EX)
0fab6de0 3696 return_frame = true;
1da177e4
LT
3697 }
3698 framesize = 0;
af69c7f9 3699#if SYNCLINK_GENERIC_HDLC
1da177e4 3700 {
198191c4
KH
3701 info->netdev->stats.rx_errors++;
3702 info->netdev->stats.rx_frame_errors++;
1da177e4
LT
3703 }
3704#endif
3705 } else
0fab6de0 3706 return_frame = true;
1da177e4
LT
3707
3708 if (return_frame)
3709 framesize = buf->count;
3710
3711 if (debug_level >= DEBUG_LEVEL_BH)
3712 printk("%s(%d):rx_get_frame(%s) status=%04X size=%d\n",
3d553993 3713 __FILE__, __LINE__, info->device_name, status, framesize);
d12341f9 3714
1da177e4 3715 if (debug_level >= DEBUG_LEVEL_DATA)
d12341f9
JG
3716 trace_block(info, buf->data, framesize, 0);
3717
1da177e4
LT
3718 if (framesize) {
3719 if ((info->params.crc_type & HDLC_CRC_RETURN_EX &&
3720 framesize+1 > info->max_frame_size) ||
3721 framesize > info->max_frame_size)
3722 info->icount.rxlong++;
3723 else {
3724 if (status & BIT5)
3725 info->icount.rxok++;
3726
3727 if (info->params.crc_type & HDLC_CRC_RETURN_EX) {
3728 *(buf->data + framesize) = status & BIT5 ? RX_OK:RX_CRC_ERROR;
3729 ++framesize;
3730 }
3731
af69c7f9 3732#if SYNCLINK_GENERIC_HDLC
1da177e4
LT
3733 if (info->netcount)
3734 hdlcdev_rx(info, buf->data, framesize);
3735 else
3736#endif
3737 ldisc_receive_buf(tty, buf->data, info->flag_buf, framesize);
3738 }
3739 }
3740
3d553993 3741 spin_lock_irqsave(&info->lock, flags);
1da177e4
LT
3742 buf->status = buf->count = 0;
3743 info->rx_frame_count--;
3744 info->rx_get++;
3745 if (info->rx_get >= info->rx_buf_count)
3746 info->rx_get = 0;
3d553993 3747 spin_unlock_irqrestore(&info->lock, flags);
1da177e4 3748
0fab6de0 3749 return true;
1da177e4
LT
3750}
3751
0fab6de0 3752static bool register_test(MGSLPC_INFO *info)
1da177e4 3753{
d12341f9 3754 static unsigned char patterns[] =
1da177e4 3755 { 0x00, 0xff, 0xaa, 0x55, 0x69, 0x96, 0x0f };
fe971071 3756 static unsigned int count = ARRAY_SIZE(patterns);
1da177e4 3757 unsigned int i;
0fab6de0 3758 bool rc = true;
1da177e4
LT
3759 unsigned long flags;
3760
3d553993 3761 spin_lock_irqsave(&info->lock, flags);
1da177e4
LT
3762 reset_device(info);
3763
3764 for (i = 0; i < count; i++) {
3765 write_reg(info, XAD1, patterns[i]);
3766 write_reg(info, XAD2, patterns[(i + 1) % count]);
fe971071 3767 if ((read_reg(info, XAD1) != patterns[i]) ||
1da177e4 3768 (read_reg(info, XAD2) != patterns[(i + 1) % count])) {
0fab6de0 3769 rc = false;
1da177e4
LT
3770 break;
3771 }
3772 }
3773
3d553993 3774 spin_unlock_irqrestore(&info->lock, flags);
1da177e4
LT
3775 return rc;
3776}
3777
0fab6de0 3778static bool irq_test(MGSLPC_INFO *info)
1da177e4
LT
3779{
3780 unsigned long end_time;
3781 unsigned long flags;
3782
3d553993 3783 spin_lock_irqsave(&info->lock, flags);
1da177e4
LT
3784 reset_device(info);
3785
0fab6de0 3786 info->testing_irq = true;
1da177e4
LT
3787 hdlc_mode(info);
3788
0fab6de0 3789 info->irq_occurred = false;
1da177e4
LT
3790
3791 /* init hdlc mode */
3792
3793 irq_enable(info, CHA, IRQ_TIMER);
3794 write_reg(info, CHA + TIMR, 0); /* 512 cycles */
3795 issue_command(info, CHA, CMD_START_TIMER);
3796
3d553993 3797 spin_unlock_irqrestore(&info->lock, flags);
1da177e4
LT
3798
3799 end_time=100;
3800 while(end_time-- && !info->irq_occurred) {
3801 msleep_interruptible(10);
3802 }
d12341f9 3803
0fab6de0 3804 info->testing_irq = false;
1da177e4 3805
3d553993 3806 spin_lock_irqsave(&info->lock, flags);
1da177e4 3807 reset_device(info);
3d553993 3808 spin_unlock_irqrestore(&info->lock, flags);
d12341f9 3809
0fab6de0 3810 return info->irq_occurred;
1da177e4
LT
3811}
3812
cdaad343 3813static int adapter_test(MGSLPC_INFO *info)
1da177e4
LT
3814{
3815 if (!register_test(info)) {
3816 info->init_error = DiagStatus_AddressFailure;
3d553993
AK
3817 printk("%s(%d):Register test failure for device %s Addr=%04X\n",
3818 __FILE__, __LINE__, info->device_name, (unsigned short)(info->io_base));
1da177e4
LT
3819 return -ENODEV;
3820 }
3821
3822 if (!irq_test(info)) {
3823 info->init_error = DiagStatus_IrqFailure;
3d553993
AK
3824 printk("%s(%d):Interrupt test failure for device %s IRQ=%d\n",
3825 __FILE__, __LINE__, info->device_name, (unsigned short)(info->irq_level));
1da177e4
LT
3826 return -ENODEV;
3827 }
3828
3829 if (debug_level >= DEBUG_LEVEL_INFO)
3830 printk("%s(%d):device %s passed diagnostics\n",
3d553993 3831 __FILE__, __LINE__, info->device_name);
1da177e4
LT
3832 return 0;
3833}
3834
cdaad343 3835static void trace_block(MGSLPC_INFO *info,const char* data, int count, int xmit)
1da177e4
LT
3836{
3837 int i;
3838 int linecount;
3839 if (xmit)
3d553993 3840 printk("%s tx data:\n", info->device_name);
1da177e4 3841 else
3d553993 3842 printk("%s rx data:\n", info->device_name);
d12341f9 3843
1da177e4
LT
3844 while(count) {
3845 if (count > 16)
3846 linecount = 16;
3847 else
3848 linecount = count;
d12341f9 3849
1da177e4 3850 for(i=0;i<linecount;i++)
3d553993 3851 printk("%02X ", (unsigned char)data[i]);
1da177e4
LT
3852 for(;i<17;i++)
3853 printk(" ");
3854 for(i=0;i<linecount;i++) {
3855 if (data[i]>=040 && data[i]<=0176)
3d553993 3856 printk("%c", data[i]);
1da177e4
LT
3857 else
3858 printk(".");
3859 }
3860 printk("\n");
d12341f9 3861
1da177e4
LT
3862 data += linecount;
3863 count -= linecount;
3864 }
3865}
3866
3867/* HDLC frame time out
3868 * update stats and do tx completion processing
3869 */
cdaad343 3870static void tx_timeout(unsigned long context)
1da177e4
LT
3871{
3872 MGSLPC_INFO *info = (MGSLPC_INFO*)context;
3873 unsigned long flags;
d12341f9 3874
3d553993
AK
3875 if (debug_level >= DEBUG_LEVEL_INFO)
3876 printk("%s(%d):tx_timeout(%s)\n",
3877 __FILE__, __LINE__, info->device_name);
3878 if (info->tx_active &&
3879 info->params.mode == MGSL_MODE_HDLC) {
1da177e4
LT
3880 info->icount.txtimeout++;
3881 }
3d553993 3882 spin_lock_irqsave(&info->lock, flags);
0fab6de0 3883 info->tx_active = false;
1da177e4
LT
3884 info->tx_count = info->tx_put = info->tx_get = 0;
3885
3d553993 3886 spin_unlock_irqrestore(&info->lock, flags);
d12341f9 3887
af69c7f9 3888#if SYNCLINK_GENERIC_HDLC
1da177e4
LT
3889 if (info->netcount)
3890 hdlcdev_tx_done(info);
3891 else
3892#endif
eeb46134
AC
3893 {
3894 struct tty_struct *tty = tty_port_tty_get(&info->port);
3895 bh_transmit(info, tty);
3896 tty_kref_put(tty);
3897 }
1da177e4
LT
3898}
3899
af69c7f9 3900#if SYNCLINK_GENERIC_HDLC
1da177e4
LT
3901
3902/**
3903 * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
3904 * set encoding and frame check sequence (FCS) options
3905 *
3906 * dev pointer to network device structure
3907 * encoding serial encoding setting
3908 * parity FCS setting
3909 *
3910 * returns 0 if success, otherwise error code
3911 */
3912static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
3913 unsigned short parity)
3914{
3915 MGSLPC_INFO *info = dev_to_port(dev);
eeb46134 3916 struct tty_struct *tty;
1da177e4
LT
3917 unsigned char new_encoding;
3918 unsigned short new_crctype;
3919
3920 /* return error if TTY interface open */
eeb46134 3921 if (info->port.count)
1da177e4
LT
3922 return -EBUSY;
3923
3924 switch (encoding)
3925 {
3926 case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break;
3927 case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break;
3928 case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break;
3929 case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break;
3930 case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break;
3931 default: return -EINVAL;
3932 }
3933
3934 switch (parity)
3935 {
3936 case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break;
3937 case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break;
3938 case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break;
3939 default: return -EINVAL;
3940 }
3941
3942 info->params.encoding = new_encoding;
53b3531b 3943 info->params.crc_type = new_crctype;
1da177e4
LT
3944
3945 /* if network interface up, reprogram hardware */
eeb46134
AC
3946 if (info->netcount) {
3947 tty = tty_port_tty_get(&info->port);
3948 mgslpc_program_hw(info, tty);
3949 tty_kref_put(tty);
3950 }
1da177e4
LT
3951
3952 return 0;
3953}
3954
3955/**
3956 * called by generic HDLC layer to send frame
3957 *
3958 * skb socket buffer containing HDLC frame
3959 * dev pointer to network device structure
1da177e4 3960 */
4c5d502d
SH
3961static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb,
3962 struct net_device *dev)
1da177e4
LT
3963{
3964 MGSLPC_INFO *info = dev_to_port(dev);
1da177e4
LT
3965 unsigned long flags;
3966
3967 if (debug_level >= DEBUG_LEVEL_INFO)
3d553993 3968 printk(KERN_INFO "%s:hdlc_xmit(%s)\n", __FILE__, dev->name);
1da177e4
LT
3969
3970 /* stop sending until this frame completes */
3971 netif_stop_queue(dev);
3972
3973 /* copy data to device buffers */
d626f62b 3974 skb_copy_from_linear_data(skb, info->tx_buf, skb->len);
1da177e4
LT
3975 info->tx_get = 0;
3976 info->tx_put = info->tx_count = skb->len;
3977
3978 /* update network statistics */
198191c4
KH
3979 dev->stats.tx_packets++;
3980 dev->stats.tx_bytes += skb->len;
1da177e4
LT
3981
3982 /* done with socket buffer, so free it */
3983 dev_kfree_skb(skb);
3984
3985 /* save start time for transmit timeout detection */
3986 dev->trans_start = jiffies;
3987
3988 /* start hardware transmitter if necessary */
3d553993 3989 spin_lock_irqsave(&info->lock, flags);
eeb46134
AC
3990 if (!info->tx_active) {
3991 struct tty_struct *tty = tty_port_tty_get(&info->port);
3d553993
AK
3992 tx_start(info, tty);
3993 tty_kref_put(tty);
eeb46134 3994 }
3d553993 3995 spin_unlock_irqrestore(&info->lock, flags);
1da177e4 3996
4c5d502d 3997 return NETDEV_TX_OK;
1da177e4
LT
3998}
3999
4000/**
4001 * called by network layer when interface enabled
4002 * claim resources and initialize hardware
4003 *
4004 * dev pointer to network device structure
4005 *
4006 * returns 0 if success, otherwise error code
4007 */
4008static int hdlcdev_open(struct net_device *dev)
4009{
4010 MGSLPC_INFO *info = dev_to_port(dev);
eeb46134 4011 struct tty_struct *tty;
1da177e4
LT
4012 int rc;
4013 unsigned long flags;
4014
4015 if (debug_level >= DEBUG_LEVEL_INFO)
3d553993 4016 printk("%s:hdlcdev_open(%s)\n", __FILE__, dev->name);
1da177e4
LT
4017
4018 /* generic HDLC layer open processing */
3d553993
AK
4019 rc = hdlc_open(dev);
4020 if (rc != 0)
1da177e4
LT
4021 return rc;
4022
4023 /* arbitrate between network and tty opens */
4024 spin_lock_irqsave(&info->netlock, flags);
eeb46134 4025 if (info->port.count != 0 || info->netcount != 0) {
1da177e4
LT
4026 printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name);
4027 spin_unlock_irqrestore(&info->netlock, flags);
4028 return -EBUSY;
4029 }
4030 info->netcount=1;
4031 spin_unlock_irqrestore(&info->netlock, flags);
4032
eeb46134 4033 tty = tty_port_tty_get(&info->port);
1da177e4 4034 /* claim resources and init adapter */
3d553993
AK
4035 rc = startup(info, tty);
4036 if (rc != 0) {
eeb46134 4037 tty_kref_put(tty);
1da177e4
LT
4038 spin_lock_irqsave(&info->netlock, flags);
4039 info->netcount=0;
4040 spin_unlock_irqrestore(&info->netlock, flags);
4041 return rc;
4042 }
9fe8074b
JP
4043 /* assert RTS and DTR, apply hardware settings */
4044 info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
eeb46134
AC
4045 mgslpc_program_hw(info, tty);
4046 tty_kref_put(tty);
1da177e4
LT
4047
4048 /* enable network layer transmit */
4049 dev->trans_start = jiffies;
4050 netif_start_queue(dev);
4051
4052 /* inform generic HDLC layer of current DCD status */
4053 spin_lock_irqsave(&info->lock, flags);
4054 get_signals(info);
4055 spin_unlock_irqrestore(&info->lock, flags);
fbeff3c1
KH
4056 if (info->serial_signals & SerialSignal_DCD)
4057 netif_carrier_on(dev);
4058 else
4059 netif_carrier_off(dev);
1da177e4
LT
4060 return 0;
4061}
4062
4063/**
4064 * called by network layer when interface is disabled
4065 * shutdown hardware and release resources
4066 *
4067 * dev pointer to network device structure
4068 *
4069 * returns 0 if success, otherwise error code
4070 */
4071static int hdlcdev_close(struct net_device *dev)
4072{
4073 MGSLPC_INFO *info = dev_to_port(dev);
eeb46134 4074 struct tty_struct *tty = tty_port_tty_get(&info->port);
1da177e4
LT
4075 unsigned long flags;
4076
4077 if (debug_level >= DEBUG_LEVEL_INFO)
3d553993 4078 printk("%s:hdlcdev_close(%s)\n", __FILE__, dev->name);
1da177e4
LT
4079
4080 netif_stop_queue(dev);
4081
4082 /* shutdown adapter and release resources */
eeb46134
AC
4083 shutdown(info, tty);
4084 tty_kref_put(tty);
1da177e4
LT
4085 hdlc_close(dev);
4086
4087 spin_lock_irqsave(&info->netlock, flags);
4088 info->netcount=0;
4089 spin_unlock_irqrestore(&info->netlock, flags);
4090
4091 return 0;
4092}
4093
4094/**
4095 * called by network layer to process IOCTL call to network device
4096 *
4097 * dev pointer to network device structure
4098 * ifr pointer to network interface request structure
4099 * cmd IOCTL command code
4100 *
4101 * returns 0 if success, otherwise error code
4102 */
4103static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
4104{
4105 const size_t size = sizeof(sync_serial_settings);
4106 sync_serial_settings new_line;
4107 sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
4108 MGSLPC_INFO *info = dev_to_port(dev);
4109 unsigned int flags;
4110
4111 if (debug_level >= DEBUG_LEVEL_INFO)
3d553993 4112 printk("%s:hdlcdev_ioctl(%s)\n", __FILE__, dev->name);
1da177e4
LT
4113
4114 /* return error if TTY interface open */
eeb46134 4115 if (info->port.count)
1da177e4
LT
4116 return -EBUSY;
4117
4118 if (cmd != SIOCWANDEV)
4119 return hdlc_ioctl(dev, ifr, cmd);
4120
5b917a14
VK
4121 memset(&new_line, 0, size);
4122
1da177e4
LT
4123 switch(ifr->ifr_settings.type) {
4124 case IF_GET_IFACE: /* return current sync_serial_settings */
4125
4126 ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
4127 if (ifr->ifr_settings.size < size) {
4128 ifr->ifr_settings.size = size; /* data size wanted */
4129 return -ENOBUFS;
4130 }
4131
4132 flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
4133 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
4134 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
4135 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
4136
4137 switch (flags){
4138 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
4139 case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break;
4140 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break;
4141 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break;
4142 default: new_line.clock_type = CLOCK_DEFAULT;
4143 }
4144
4145 new_line.clock_rate = info->params.clock_speed;
4146 new_line.loopback = info->params.loopback ? 1:0;
4147
4148 if (copy_to_user(line, &new_line, size))
4149 return -EFAULT;
4150 return 0;
4151
4152 case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */
4153
4154 if(!capable(CAP_NET_ADMIN))
4155 return -EPERM;
4156 if (copy_from_user(&new_line, line, size))
4157 return -EFAULT;
4158
4159 switch (new_line.clock_type)
4160 {
4161 case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break;
4162 case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break;
4163 case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break;
4164 case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break;
4165 case CLOCK_DEFAULT: flags = info->params.flags &
4166 (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
4167 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
4168 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
4169 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break;
4170 default: return -EINVAL;
4171 }
4172
4173 if (new_line.loopback != 0 && new_line.loopback != 1)
4174 return -EINVAL;
4175
4176 info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
4177 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
4178 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
4179 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
4180 info->params.flags |= flags;
4181
4182 info->params.loopback = new_line.loopback;
4183
4184 if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG))
4185 info->params.clock_speed = new_line.clock_rate;
4186 else
4187 info->params.clock_speed = 0;
4188
4189 /* if network interface up, reprogram hardware */
eeb46134
AC
4190 if (info->netcount) {
4191 struct tty_struct *tty = tty_port_tty_get(&info->port);
4192 mgslpc_program_hw(info, tty);
4193 tty_kref_put(tty);
4194 }
1da177e4
LT
4195 return 0;
4196
4197 default:
4198 return hdlc_ioctl(dev, ifr, cmd);
4199 }
4200}
4201
4202/**
4203 * called by network layer when transmit timeout is detected
4204 *
4205 * dev pointer to network device structure
4206 */
4207static void hdlcdev_tx_timeout(struct net_device *dev)
4208{
4209 MGSLPC_INFO *info = dev_to_port(dev);
1da177e4
LT
4210 unsigned long flags;
4211
4212 if (debug_level >= DEBUG_LEVEL_INFO)
3d553993 4213 printk("hdlcdev_tx_timeout(%s)\n", dev->name);
1da177e4 4214
198191c4
KH
4215 dev->stats.tx_errors++;
4216 dev->stats.tx_aborted_errors++;
1da177e4 4217
3d553993 4218 spin_lock_irqsave(&info->lock, flags);
1da177e4 4219 tx_stop(info);
3d553993 4220 spin_unlock_irqrestore(&info->lock, flags);
1da177e4
LT
4221
4222 netif_wake_queue(dev);
4223}
4224
4225/**
4226 * called by device driver when transmit completes
4227 * reenable network layer transmit if stopped
4228 *
4229 * info pointer to device instance information
4230 */
4231static void hdlcdev_tx_done(MGSLPC_INFO *info)
4232{
4233 if (netif_queue_stopped(info->netdev))
4234 netif_wake_queue(info->netdev);
4235}
4236
4237/**
4238 * called by device driver when frame received
4239 * pass frame to network layer
4240 *
4241 * info pointer to device instance information
4242 * buf pointer to buffer contianing frame data
4243 * size count of data bytes in buf
4244 */
4245static void hdlcdev_rx(MGSLPC_INFO *info, char *buf, int size)
4246{
4247 struct sk_buff *skb = dev_alloc_skb(size);
4248 struct net_device *dev = info->netdev;
1da177e4
LT
4249
4250 if (debug_level >= DEBUG_LEVEL_INFO)
3d553993 4251 printk("hdlcdev_rx(%s)\n", dev->name);
1da177e4
LT
4252
4253 if (skb == NULL) {
4254 printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n", dev->name);
198191c4 4255 dev->stats.rx_dropped++;
1da177e4
LT
4256 return;
4257 }
4258
198191c4 4259 memcpy(skb_put(skb, size), buf, size);
1da177e4 4260
198191c4 4261 skb->protocol = hdlc_type_trans(skb, dev);
1da177e4 4262
198191c4
KH
4263 dev->stats.rx_packets++;
4264 dev->stats.rx_bytes += size;
1da177e4
LT
4265
4266 netif_rx(skb);
1da177e4
LT
4267}
4268
991990a1
KH
4269static const struct net_device_ops hdlcdev_ops = {
4270 .ndo_open = hdlcdev_open,
4271 .ndo_stop = hdlcdev_close,
4272 .ndo_change_mtu = hdlc_change_mtu,
4273 .ndo_start_xmit = hdlc_start_xmit,
4274 .ndo_do_ioctl = hdlcdev_ioctl,
4275 .ndo_tx_timeout = hdlcdev_tx_timeout,
4276};
4277
1da177e4
LT
4278/**
4279 * called by device driver when adding device instance
4280 * do generic HDLC initialization
4281 *
4282 * info pointer to device instance information
4283 *
4284 * returns 0 if success, otherwise error code
4285 */
4286static int hdlcdev_init(MGSLPC_INFO *info)
4287{
4288 int rc;
4289 struct net_device *dev;
4290 hdlc_device *hdlc;
4291
4292 /* allocate and initialize network and HDLC layer objects */
4293
3d553993
AK
4294 dev = alloc_hdlcdev(info);
4295 if (dev == NULL) {
4296 printk(KERN_ERR "%s:hdlc device allocation failure\n", __FILE__);
1da177e4
LT
4297 return -ENOMEM;
4298 }
4299
4300 /* for network layer reporting purposes only */
4301 dev->base_addr = info->io_base;
4302 dev->irq = info->irq_level;
4303
4304 /* network layer callbacks and settings */
991990a1
KH
4305 dev->netdev_ops = &hdlcdev_ops;
4306 dev->watchdog_timeo = 10 * HZ;
1da177e4
LT
4307 dev->tx_queue_len = 50;
4308
4309 /* generic HDLC layer callbacks and settings */
4310 hdlc = dev_to_hdlc(dev);
4311 hdlc->attach = hdlcdev_attach;
4312 hdlc->xmit = hdlcdev_xmit;
4313
4314 /* register objects with HDLC layer */
3d553993
AK
4315 rc = register_hdlc_device(dev);
4316 if (rc) {
4317 printk(KERN_WARNING "%s:unable to register hdlc device\n", __FILE__);
1da177e4
LT
4318 free_netdev(dev);
4319 return rc;
4320 }
4321
4322 info->netdev = dev;
4323 return 0;
4324}
4325
4326/**
4327 * called by device driver when removing device instance
4328 * do generic HDLC cleanup
4329 *
4330 * info pointer to device instance information
4331 */
4332static void hdlcdev_exit(MGSLPC_INFO *info)
4333{
4334 unregister_hdlc_device(info->netdev);
4335 free_netdev(info->netdev);
4336 info->netdev = NULL;
4337}
4338
4339#endif /* CONFIG_HDLC */
4340
This page took 1.542444 seconds and 5 git commands to generate.