projects / deliverable / linux.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
Audit: collect sessionid in netlink messages
[deliverable/linux.git] / drivers / char / riscom8.c
CommitLineData
1da177e4
LT		 1/*
2 * linux/drivers/char/riscom.c -- RISCom/8 multiport serial driver.
3 *
4 * Copyright (C) 1994-1996 Dmitry Gorodchanin (pgmdsg@ibi.com)
5 *
6 * This code is loosely based on the Linux serial driver, written by
7 * Linus Torvalds, Theodore T'so and others. The RISCom/8 card
8 * programming info was obtained from various drivers for other OSes
9 * (FreeBSD, ISC, etc), but no source code from those drivers were
10 * directly included in this driver.
11 *
12 *
13 * This program is free software; you can redistribute it and/or modify
14 * it under the terms of the GNU General Public License as published by
15 * the Free Software Foundation; either version 2 of the License, or
16 * (at your option) any later version.
17 *
18 * This program is distributed in the hope that it will be useful,
19 * but WITHOUT ANY WARRANTY; without even the implied warranty of
20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 * GNU General Public License for more details.
22 *
23 * You should have received a copy of the GNU General Public License
24 * along with this program; if not, write to the Free Software
25 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
26 *
27 * Revision 1.1
28 *
29 * ChangeLog:
30 * Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 27-Jun-2001
31 * - get rid of check_region and several cleanups
32 */
33
34#include <linux/module.h>
35
36#include <asm/io.h>
37#include <linux/kernel.h>
38#include <linux/sched.h>
39#include <linux/ioport.h>
40#include <linux/interrupt.h>
41#include <linux/errno.h>
42#include <linux/tty.h>
43#include <linux/mm.h>
44#include <linux/serial.h>
45#include <linux/fcntl.h>
46#include <linux/major.h>
47#include <linux/init.h>
48#include <linux/delay.h>
33f0f88f 49#include <linux/tty_flip.h>
d9afa435 50#include <linux/spinlock.h>
1da177e4
LT		 51
52#include <asm/uaccess.h>
53
54#include "riscom8.h"
55#include "riscom8_reg.h"
56
57/* Am I paranoid or not ? ;-) */
58#define RISCOM_PARANOIA_CHECK
59
60/*
61 * Crazy InteliCom/8 boards sometimes has swapped CTS & DSR signals.
62 * You can slightly speed up things by #undefing the following option,
63 * if you are REALLY sure that your board is correct one.
64 */
65
66#define RISCOM_BRAIN_DAMAGED_CTS
67
68/*
69 * The following defines are mostly for testing purposes. But if you need
70 * some nice reporting in your syslog, you can define them also.
71 */
72#undef RC_REPORT_FIFO
73#undef RC_REPORT_OVERRUN
74
75
76#define RISCOM_LEGAL_FLAGS \
77 (ASYNC_HUP_NOTIFY | ASYNC_SAK | ASYNC_SPLIT_TERMIOS | \
78 ASYNC_SPD_HI | ASYNC_SPEED_VHI | ASYNC_SESSION_LOCKOUT | \
79 ASYNC_PGRP_LOCKOUT | ASYNC_CALLOUT_NOHUP)
80
1da177e4 81static struct tty_driver *riscom_driver;
1da177e4 82
d9afa435
JG		 83static DEFINE_SPINLOCK(riscom_lock);
84
1da177e4
LT		 85static struct riscom_board rc_board[RC_NBOARD] = {
86 {
87 .base = RC_IOBASE1,
88 },
89 {
90 .base = RC_IOBASE2,
91 },
92 {
93 .base = RC_IOBASE3,
94 },
95 {
96 .base = RC_IOBASE4,
97 },
98};
99
100static struct riscom_port rc_port[RC_NBOARD * RC_NPORT];
101
102/* RISCom/8 I/O ports addresses (without address translation) */
103static unsigned short rc_ioport[] = {
fe971071 104#if 1
1da177e4 105 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x09, 0x0a, 0x0b, 0x0c,
fe971071 106#else
1da177e4
LT		 107 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x09, 0x0a, 0x0b, 0x0c, 0x10,
108 0x11, 0x12, 0x18, 0x28, 0x31, 0x32, 0x39, 0x3a, 0x40, 0x41, 0x61, 0x62,
109 0x63, 0x64, 0x6b, 0x70, 0x71, 0x78, 0x7a, 0x7b, 0x7f, 0x100, 0x101
fe971071 110#endif
1da177e4 111};
fe971071 112#define RC_NIOPORT ARRAY_SIZE(rc_ioport)
1da177e4
LT		 113
114
115static inline int rc_paranoia_check(struct riscom_port const * port,
116 char *name, const char *routine)
117{
118#ifdef RISCOM_PARANOIA_CHECK
119 static const char badmagic[] = KERN_INFO
120 "rc: Warning: bad riscom port magic number for device %s in %s\n";
121 static const char badinfo[] = KERN_INFO
122 "rc: Warning: null riscom port for device %s in %s\n";
123
124 if (!port) {
125 printk(badinfo, name, routine);
126 return 1;
127 }
128 if (port->magic != RISCOM8_MAGIC) {
129 printk(badmagic, name, routine);
130 return 1;
131 }
132#endif
133 return 0;
134}
135
136/*
137 *
138 * Service functions for RISCom/8 driver.
139 *
140 */
141
142/* Get board number from pointer */
143static inline int board_No (struct riscom_board const * bp)
144{
145 return bp - rc_board;
146}
147
148/* Get port number from pointer */
149static inline int port_No (struct riscom_port const * port)
150{
151 return RC_PORT(port - rc_port);
152}
153
154/* Get pointer to board from pointer to port */
155static inline struct riscom_board * port_Board(struct riscom_port const * port)
156{
157 return &rc_board[RC_BOARD(port - rc_port)];
158}
159
160/* Input Byte from CL CD180 register */
161static inline unsigned char rc_in(struct riscom_board const * bp, unsigned short reg)
162{
163 return inb(bp->base + RC_TO_ISA(reg));
164}
165
166/* Output Byte to CL CD180 register */
167static inline void rc_out(struct riscom_board const * bp, unsigned short reg,
168 unsigned char val)
169{
170 outb(val, bp->base + RC_TO_ISA(reg));
171}
172
173/* Wait for Channel Command Register ready */
174static inline void rc_wait_CCR(struct riscom_board const * bp)
175{
176 unsigned long delay;
177
178 /* FIXME: need something more descriptive then 100000 :) */
179 for (delay = 100000; delay; delay--)
180 if (!rc_in(bp, CD180_CCR))
181 return;
182
183 printk(KERN_INFO "rc%d: Timeout waiting for CCR.\n", board_No(bp));
184}
185
186/*
187 * RISCom/8 probe functions.
188 */
189
190static inline int rc_request_io_range(struct riscom_board * const bp)
191{
192 int i;
193
194 for (i = 0; i < RC_NIOPORT; i++)
195 if (!request_region(RC_TO_ISA(rc_ioport[i]) + bp->base, 1,
196 "RISCom/8")) {
197 goto out_release;
198 }
199 return 0;
200out_release:
201 printk(KERN_INFO "rc%d: Skipping probe at 0x%03x. IO address in use.\n",
202 board_No(bp), bp->base);
203 while(--i >= 0)
204 release_region(RC_TO_ISA(rc_ioport[i]) + bp->base, 1);
205 return 1;
206}
207
208static inline void rc_release_io_range(struct riscom_board * const bp)
209{
210 int i;
211
212 for (i = 0; i < RC_NIOPORT; i++)
213 release_region(RC_TO_ISA(rc_ioport[i]) + bp->base, 1);
214}
215
1da177e4
LT		 216/* Reset and setup CD180 chip */
217static void __init rc_init_CD180(struct riscom_board const * bp)
218{
219 unsigned long flags;
220
d9afa435
JG		 221 spin_lock_irqsave(&riscom_lock, flags);
222
1da177e4
LT		 223 rc_out(bp, RC_CTOUT, 0); /* Clear timeout */
224 rc_wait_CCR(bp); /* Wait for CCR ready */
225 rc_out(bp, CD180_CCR, CCR_HARDRESET); /* Reset CD180 chip */
d9afa435 226 spin_unlock_irqrestore(&riscom_lock, flags);
c4ebd927 227 msleep(50); /* Delay 0.05 sec */
d9afa435 228 spin_lock_irqsave(&riscom_lock, flags);
1da177e4
LT		 229 rc_out(bp, CD180_GIVR, RC_ID); /* Set ID for this chip */
230 rc_out(bp, CD180_GICR, 0); /* Clear all bits */
231 rc_out(bp, CD180_PILR1, RC_ACK_MINT); /* Prio for modem intr */
232 rc_out(bp, CD180_PILR2, RC_ACK_TINT); /* Prio for transmitter intr */
233 rc_out(bp, CD180_PILR3, RC_ACK_RINT); /* Prio for receiver intr */
234
235 /* Setting up prescaler. We need 4 ticks per 1 ms */
236 rc_out(bp, CD180_PPRH, (RC_OSCFREQ/(1000000/RISCOM_TPS)) >> 8);
237 rc_out(bp, CD180_PPRL, (RC_OSCFREQ/(1000000/RISCOM_TPS)) & 0xff);
238
d9afa435 239 spin_unlock_irqrestore(&riscom_lock, flags);
1da177e4
LT		 240}
241
242/* Main probing routine, also sets irq. */
243static int __init rc_probe(struct riscom_board *bp)
244{
245 unsigned char val1, val2;
246 int irqs = 0;
247 int retries;
248
249 bp->irq = 0;
250
251 if (rc_request_io_range(bp))
252 return 1;
253
254 /* Are the I/O ports here ? */
255 rc_out(bp, CD180_PPRL, 0x5a);
256 outb(0xff, 0x80);
257 val1 = rc_in(bp, CD180_PPRL);
258 rc_out(bp, CD180_PPRL, 0xa5);
259 outb(0x00, 0x80);
260 val2 = rc_in(bp, CD180_PPRL);
261
262 if ((val1 != 0x5a) || (val2 != 0xa5)) {
263 printk(KERN_ERR "rc%d: RISCom/8 Board at 0x%03x not found.\n",
264 board_No(bp), bp->base);
265 goto out_release;
266 }
267
268 /* It's time to find IRQ for this board */
269 for (retries = 0; retries < 5 && irqs <= 0; retries++) {
270 irqs = probe_irq_on();
271 rc_init_CD180(bp); /* Reset CD180 chip */
272 rc_out(bp, CD180_CAR, 2); /* Select port 2 */
273 rc_wait_CCR(bp);
274 rc_out(bp, CD180_CCR, CCR_TXEN); /* Enable transmitter */
275 rc_out(bp, CD180_IER, IER_TXRDY); /* Enable tx empty intr */
c4ebd927 276 msleep(50);
1da177e4
LT		 277 irqs = probe_irq_off(irqs);
278 val1 = rc_in(bp, RC_BSR); /* Get Board Status reg */
279 val2 = rc_in(bp, RC_ACK_TINT); /* ACK interrupt */
280 rc_init_CD180(bp); /* Reset CD180 again */
281
282 if ((val1 & RC_BSR_TINT) || (val2 != (RC_ID | GIVR_IT_TX))) {
283 printk(KERN_ERR "rc%d: RISCom/8 Board at 0x%03x not "
284 "found.\n", board_No(bp), bp->base);
285 goto out_release;
286 }
287 }
288
289 if (irqs <= 0) {
290 printk(KERN_ERR "rc%d: Can't find IRQ for RISCom/8 board "
291 "at 0x%03x.\n", board_No(bp), bp->base);
292 goto out_release;
293 }
294 bp->irq = irqs;
295 bp->flags |= RC_BOARD_PRESENT;
296
297 printk(KERN_INFO "rc%d: RISCom/8 Rev. %c board detected at "
298 "0x%03x, IRQ %d.\n",
299 board_No(bp),
300 (rc_in(bp, CD180_GFRCR) & 0x0f) + 'A', /* Board revision */
301 bp->base, bp->irq);
302
303 return 0;
304out_release:
305 rc_release_io_range(bp);
306 return 1;
307}
308
309/*
310 *
311 * Interrupt processing routines.
312 *
313 */
314
1da177e4
LT		 315static inline struct riscom_port * rc_get_port(struct riscom_board const * bp,
316 unsigned char const * what)
317{
318 unsigned char channel;
319 struct riscom_port * port;
320
321 channel = rc_in(bp, CD180_GICR) >> GICR_CHAN_OFF;
322 if (channel < CD180_NCH) {
323 port = &rc_port[board_No(bp) * RC_NPORT + channel];
324 if (port->flags & ASYNC_INITIALIZED) {
325 return port;
326 }
327 }
328 printk(KERN_ERR "rc%d: %s interrupt from invalid port %d\n",
329 board_No(bp), what, channel);
330 return NULL;
331}
332
333static inline void rc_receive_exc(struct riscom_board const * bp)
334{
335 struct riscom_port *port;
336 struct tty_struct *tty;
337 unsigned char status;
33f0f88f 338 unsigned char ch, flag;
1da177e4
LT		 339
340 if (!(port = rc_get_port(bp, "Receive")))
341 return;
342
343 tty = port->tty;
1da177e4
LT		 344
345#ifdef RC_REPORT_OVERRUN
346 status = rc_in(bp, CD180_RCSR);
33f0f88f 347 if (status & RCSR_OE)
1da177e4 348 port->overrun++;
1da177e4
LT		 349 status &= port->mark_mask;
350#else
351 status = rc_in(bp, CD180_RCSR) & port->mark_mask;
352#endif
353 ch = rc_in(bp, CD180_RDR);
354 if (!status) {
355 return;
356 }
357 if (status & RCSR_TOUT) {
358 printk(KERN_WARNING "rc%d: port %d: Receiver timeout. "
359 "Hardware problems ?\n",
360 board_No(bp), port_No(port));
361 return;
362
363 } else if (status & RCSR_BREAK) {
364 printk(KERN_INFO "rc%d: port %d: Handling break...\n",
365 board_No(bp), port_No(port));
33f0f88f 366 flag = TTY_BREAK;
1da177e4
LT		 367 if (port->flags & ASYNC_SAK)
368 do_SAK(tty);
369
370 } else if (status & RCSR_PE)
33f0f88f 371 flag = TTY_PARITY;
1da177e4
LT		 372
373 else if (status & RCSR_FE)
33f0f88f 374 flag = TTY_FRAME;
1da177e4
LT		 375
376 else if (status & RCSR_OE)
33f0f88f 377 flag = TTY_OVERRUN;
1da177e4
LT		 378
379 else
33f0f88f 380 flag = TTY_NORMAL;
1da177e4 381
33f0f88f
AC		 382 tty_insert_flip_char(tty, ch, flag);
383 tty_flip_buffer_push(tty);
1da177e4
LT		 384}
385
386static inline void rc_receive(struct riscom_board const * bp)
387{
388 struct riscom_port *port;
389 struct tty_struct *tty;
390 unsigned char count;
391
392 if (!(port = rc_get_port(bp, "Receive")))
393 return;
394
395 tty = port->tty;
396
397 count = rc_in(bp, CD180_RDCR);
398
399#ifdef RC_REPORT_FIFO
400 port->hits[count > 8 ? 9 : count]++;
401#endif
402
403 while (count--) {
33f0f88f 404 if (tty_buffer_request_room(tty, 1) == 0) {
1da177e4
LT		 405 printk(KERN_WARNING "rc%d: port %d: Working around "
406 "flip buffer overflow.\n",
407 board_No(bp), port_No(port));
408 break;
409 }
33f0f88f 410 tty_insert_flip_char(tty, rc_in(bp, CD180_RDR), TTY_NORMAL);
1da177e4 411 }
33f0f88f 412 tty_flip_buffer_push(tty);
1da177e4
LT		 413}
414
415static inline void rc_transmit(struct riscom_board const * bp)
416{
417 struct riscom_port *port;
418 struct tty_struct *tty;
419 unsigned char count;
420
421
422 if (!(port = rc_get_port(bp, "Transmit")))
423 return;
424
425 tty = port->tty;
426
427 if (port->IER & IER_TXEMPTY) {
428 /* FIFO drained */
429 rc_out(bp, CD180_CAR, port_No(port));
430 port->IER &= ~IER_TXEMPTY;
431 rc_out(bp, CD180_IER, port->IER);
432 return;
433 }
434
435 if ((port->xmit_cnt <= 0 && !port->break_length)
436 || tty->stopped || tty->hw_stopped) {
437 rc_out(bp, CD180_CAR, port_No(port));
438 port->IER &= ~IER_TXRDY;
439 rc_out(bp, CD180_IER, port->IER);
440 return;
441 }
442
443 if (port->break_length) {
444 if (port->break_length > 0) {
445 if (port->COR2 & COR2_ETC) {
446 rc_out(bp, CD180_TDR, CD180_C_ESC);
447 rc_out(bp, CD180_TDR, CD180_C_SBRK);
448 port->COR2 &= ~COR2_ETC;
449 }
450 count = min_t(int, port->break_length, 0xff);
451 rc_out(bp, CD180_TDR, CD180_C_ESC);
452 rc_out(bp, CD180_TDR, CD180_C_DELAY);
453 rc_out(bp, CD180_TDR, count);
454 if (!(port->break_length -= count))
455 port->break_length--;
456 } else {
457 rc_out(bp, CD180_TDR, CD180_C_ESC);
458 rc_out(bp, CD180_TDR, CD180_C_EBRK);
459 rc_out(bp, CD180_COR2, port->COR2);
460 rc_wait_CCR(bp);
461 rc_out(bp, CD180_CCR, CCR_CORCHG2);
462 port->break_length = 0;
463 }
464 return;
465 }
466
467 count = CD180_NFIFO;
468 do {
469 rc_out(bp, CD180_TDR, port->xmit_buf[port->xmit_tail++]);
470 port->xmit_tail = port->xmit_tail & (SERIAL_XMIT_SIZE-1);
471 if (--port->xmit_cnt <= 0)
472 break;
473 } while (--count > 0);
474
475 if (port->xmit_cnt <= 0) {
476 rc_out(bp, CD180_CAR, port_No(port));
477 port->IER &= ~IER_TXRDY;
478 rc_out(bp, CD180_IER, port->IER);
479 }
480 if (port->xmit_cnt <= port->wakeup_chars)
b98e70de 481 tty_wakeup(tty);
1da177e4
LT		 482}
483
484static inline void rc_check_modem(struct riscom_board const * bp)
485{
486 struct riscom_port *port;
487 struct tty_struct *tty;
488 unsigned char mcr;
489
490 if (!(port = rc_get_port(bp, "Modem")))
491 return;
492
493 tty = port->tty;
494
495 mcr = rc_in(bp, CD180_MCR);
496 if (mcr & MCR_CDCHG) {
497 if (rc_in(bp, CD180_MSVR) & MSVR_CD)
498 wake_up_interruptible(&port->open_wait);
499 else
b98e70de 500 tty_hangup(tty);
1da177e4
LT		 501 }
502
503#ifdef RISCOM_BRAIN_DAMAGED_CTS
504 if (mcr & MCR_CTSCHG) {
505 if (rc_in(bp, CD180_MSVR) & MSVR_CTS) {
506 tty->hw_stopped = 0;
507 port->IER |= IER_TXRDY;
508 if (port->xmit_cnt <= port->wakeup_chars)
b98e70de 509 tty_wakeup(tty);
1da177e4
LT		 510 } else {
511 tty->hw_stopped = 1;
512 port->IER &= ~IER_TXRDY;
513 }
514 rc_out(bp, CD180_IER, port->IER);
515 }
516 if (mcr & MCR_DSRCHG) {
517 if (rc_in(bp, CD180_MSVR) & MSVR_DSR) {
518 tty->hw_stopped = 0;
519 port->IER |= IER_TXRDY;
520 if (port->xmit_cnt <= port->wakeup_chars)
b98e70de 521 tty_wakeup(tty);
1da177e4
LT		 522 } else {
523 tty->hw_stopped = 1;
524 port->IER &= ~IER_TXRDY;
525 }
526 rc_out(bp, CD180_IER, port->IER);
527 }
528#endif /* RISCOM_BRAIN_DAMAGED_CTS */
529
530 /* Clear change bits */
531 rc_out(bp, CD180_MCR, 0);
532}
533
534/* The main interrupt processing routine */
f07ef395 535static irqreturn_t rc_interrupt(int dummy, void * dev_id)
1da177e4
LT		 536{
537 unsigned char status;
538 unsigned char ack;
f07ef395 539 struct riscom_board *bp = dev_id;
1da177e4
LT		 540 unsigned long loop = 0;
541 int handled = 0;
542
c7bec5ab 543 if (!(bp->flags & RC_BOARD_ACTIVE))
1da177e4 544 return IRQ_NONE;
c7bec5ab 545
1da177e4
LT		 546 while ((++loop < 16) && ((status = ~(rc_in(bp, RC_BSR))) &
547 (RC_BSR_TOUT | RC_BSR_TINT |
548 RC_BSR_MINT | RC_BSR_RINT))) {
549 handled = 1;
550 if (status & RC_BSR_TOUT)
551 printk(KERN_WARNING "rc%d: Got timeout. Hardware "
552 "error?\n", board_No(bp));
553
554 else if (status & RC_BSR_RINT) {
555 ack = rc_in(bp, RC_ACK_RINT);
556
557 if (ack == (RC_ID | GIVR_IT_RCV))
558 rc_receive(bp);
559 else if (ack == (RC_ID | GIVR_IT_REXC))
560 rc_receive_exc(bp);
561 else
562 printk(KERN_WARNING "rc%d: Bad receive ack "
563 "0x%02x.\n",
564 board_No(bp), ack);
565
566 } else if (status & RC_BSR_TINT) {
567 ack = rc_in(bp, RC_ACK_TINT);
568
569 if (ack == (RC_ID | GIVR_IT_TX))
570 rc_transmit(bp);
571 else
572 printk(KERN_WARNING "rc%d: Bad transmit ack "
573 "0x%02x.\n",
574 board_No(bp), ack);
575
576 } else /* if (status & RC_BSR_MINT) */ {
577 ack = rc_in(bp, RC_ACK_MINT);
578
579 if (ack == (RC_ID | GIVR_IT_MODEM))
580 rc_check_modem(bp);
581 else
582 printk(KERN_WARNING "rc%d: Bad modem ack "
583 "0x%02x.\n",
584 board_No(bp), ack);
585
586 }
587
588 rc_out(bp, CD180_EOIR, 0); /* Mark end of interrupt */
589 rc_out(bp, RC_CTOUT, 0); /* Clear timeout flag */
590 }
591 return IRQ_RETVAL(handled);
592}
593
594/*
595 * Routines for open & close processing.
596 */
597
598/* Called with disabled interrupts */
f07ef395 599static int rc_setup_board(struct riscom_board * bp)
1da177e4
LT		 600{
601 int error;
602
603 if (bp->flags & RC_BOARD_ACTIVE)
604 return 0;
605
0f2ed4c6 606 error = request_irq(bp->irq, rc_interrupt, IRQF_DISABLED,
f07ef395 607 "RISCom/8", bp);
1da177e4
LT		 608 if (error)
609 return error;
610
611 rc_out(bp, RC_CTOUT, 0); /* Just in case */
612 bp->DTR = ~0;
613 rc_out(bp, RC_DTR, bp->DTR); /* Drop DTR on all ports */
614
1da177e4
LT		 615 bp->flags |= RC_BOARD_ACTIVE;
616
617 return 0;
618}
619
620/* Called with disabled interrupts */
f07ef395 621static void rc_shutdown_board(struct riscom_board *bp)
1da177e4
LT		 622{
623 if (!(bp->flags & RC_BOARD_ACTIVE))
624 return;
625
626 bp->flags &= ~RC_BOARD_ACTIVE;
627
628 free_irq(bp->irq, NULL);
1da177e4
LT		 629
630 bp->DTR = ~0;
631 rc_out(bp, RC_DTR, bp->DTR); /* Drop DTR on all ports */
632
633}
634
635/*
636 * Setting up port characteristics.
637 * Must be called with disabled interrupts
638 */
639static void rc_change_speed(struct riscom_board *bp, struct riscom_port *port)
640{
641 struct tty_struct *tty;
642 unsigned long baud;
643 long tmp;
644 unsigned char cor1 = 0, cor3 = 0;
645 unsigned char mcor1 = 0, mcor2 = 0;
646
647 if (!(tty = port->tty) || !tty->termios)
648 return;
649
650 port->IER = 0;
651 port->COR2 = 0;
652 port->MSVR = MSVR_RTS;
653
c7bce309 654 baud = tty_get_baud_rate(tty);
1da177e4
LT		 655
656 /* Select port on the board */
657 rc_out(bp, CD180_CAR, port_No(port));
658
c7bce309 659 if (!baud) {
1da177e4
LT		 660 /* Drop DTR & exit */
661 bp->DTR |= (1u << port_No(port));
662 rc_out(bp, RC_DTR, bp->DTR);
663 return;
664 } else {
665 /* Set DTR on */
666 bp->DTR &= ~(1u << port_No(port));
667 rc_out(bp, RC_DTR, bp->DTR);
668 }
669
670 /*
671 * Now we must calculate some speed depended things
672 */
673
674 /* Set baud rate for port */
c7bce309 675 tmp = (((RC_OSCFREQ + baud/2) / baud +
1da177e4
LT		 676 CD180_TPC/2) / CD180_TPC);
677
678 rc_out(bp, CD180_RBPRH, (tmp >> 8) & 0xff);
679 rc_out(bp, CD180_TBPRH, (tmp >> 8) & 0xff);
680 rc_out(bp, CD180_RBPRL, tmp & 0xff);
681 rc_out(bp, CD180_TBPRL, tmp & 0xff);
682
c7bce309 683 baud = (baud + 5) / 10; /* Estimated CPS */
1da177e4
LT		 684
685 /* Two timer ticks seems enough to wakeup something like SLIP driver */
686 tmp = ((baud + HZ/2) / HZ) * 2 - CD180_NFIFO;
687 port->wakeup_chars = (tmp < 0) ? 0 : ((tmp >= SERIAL_XMIT_SIZE) ?
688 SERIAL_XMIT_SIZE - 1 : tmp);
689
690 /* Receiver timeout will be transmission time for 1.5 chars */
691 tmp = (RISCOM_TPS + RISCOM_TPS/2 + baud/2) / baud;
692 tmp = (tmp > 0xff) ? 0xff : tmp;
693 rc_out(bp, CD180_RTPR, tmp);
694
695 switch (C_CSIZE(tty)) {
696 case CS5:
697 cor1 |= COR1_5BITS;
698 break;
699 case CS6:
700 cor1 |= COR1_6BITS;
701 break;
702 case CS7:
703 cor1 |= COR1_7BITS;
704 break;
705 case CS8:
706 cor1 |= COR1_8BITS;
707 break;
708 }
709
710 if (C_CSTOPB(tty))
711 cor1 |= COR1_2SB;
712
713 cor1 |= COR1_IGNORE;
714 if (C_PARENB(tty)) {
715 cor1 |= COR1_NORMPAR;
716 if (C_PARODD(tty))
717 cor1 |= COR1_ODDP;
718 if (I_INPCK(tty))
719 cor1 &= ~COR1_IGNORE;
720 }
721 /* Set marking of some errors */
722 port->mark_mask = RCSR_OE | RCSR_TOUT;
723 if (I_INPCK(tty))
724 port->mark_mask |= RCSR_FE | RCSR_PE;
725 if (I_BRKINT(tty) || I_PARMRK(tty))
726 port->mark_mask |= RCSR_BREAK;
727 if (I_IGNPAR(tty))
728 port->mark_mask &= ~(RCSR_FE | RCSR_PE);
729 if (I_IGNBRK(tty)) {
730 port->mark_mask &= ~RCSR_BREAK;
731 if (I_IGNPAR(tty))
732 /* Real raw mode. Ignore all */
733 port->mark_mask &= ~RCSR_OE;
734 }
735 /* Enable Hardware Flow Control */
736 if (C_CRTSCTS(tty)) {
737#ifdef RISCOM_BRAIN_DAMAGED_CTS
738 port->IER |= IER_DSR | IER_CTS;
739 mcor1 |= MCOR1_DSRZD | MCOR1_CTSZD;
740 mcor2 |= MCOR2_DSROD | MCOR2_CTSOD;
741 tty->hw_stopped = !(rc_in(bp, CD180_MSVR) & (MSVR_CTS|MSVR_DSR));
742#else
743 port->COR2 |= COR2_CTSAE;
744#endif
745 }
746 /* Enable Software Flow Control. FIXME: I'm not sure about this */
747 /* Some people reported that it works, but I still doubt */
748 if (I_IXON(tty)) {
749 port->COR2 |= COR2_TXIBE;
750 cor3 |= (COR3_FCT | COR3_SCDE);
751 if (I_IXANY(tty))
752 port->COR2 |= COR2_IXM;
753 rc_out(bp, CD180_SCHR1, START_CHAR(tty));
754 rc_out(bp, CD180_SCHR2, STOP_CHAR(tty));
755 rc_out(bp, CD180_SCHR3, START_CHAR(tty));
756 rc_out(bp, CD180_SCHR4, STOP_CHAR(tty));
757 }
758 if (!C_CLOCAL(tty)) {
759 /* Enable CD check */
760 port->IER |= IER_CD;
761 mcor1 |= MCOR1_CDZD;
762 mcor2 |= MCOR2_CDOD;
763 }
764
765 if (C_CREAD(tty))
766 /* Enable receiver */
767 port->IER |= IER_RXD;
768
769 /* Set input FIFO size (1-8 bytes) */
770 cor3 |= RISCOM_RXFIFO;
771 /* Setting up CD180 channel registers */
772 rc_out(bp, CD180_COR1, cor1);
773 rc_out(bp, CD180_COR2, port->COR2);
774 rc_out(bp, CD180_COR3, cor3);
775 /* Make CD180 know about registers change */
776 rc_wait_CCR(bp);
777 rc_out(bp, CD180_CCR, CCR_CORCHG1 | CCR_CORCHG2 | CCR_CORCHG3);
778 /* Setting up modem option registers */
779 rc_out(bp, CD180_MCOR1, mcor1);
780 rc_out(bp, CD180_MCOR2, mcor2);
781 /* Enable CD180 transmitter & receiver */
782 rc_wait_CCR(bp);
783 rc_out(bp, CD180_CCR, CCR_TXEN | CCR_RXEN);
784 /* Enable interrupts */
785 rc_out(bp, CD180_IER, port->IER);
786 /* And finally set RTS on */
787 rc_out(bp, CD180_MSVR, port->MSVR);
788}
789
790/* Must be called with interrupts enabled */
791static int rc_setup_port(struct riscom_board *bp, struct riscom_port *port)
792{
793 unsigned long flags;
794
795 if (port->flags & ASYNC_INITIALIZED)
796 return 0;
797
798 if (!port->xmit_buf) {
799 /* We may sleep in get_zeroed_page() */
800 unsigned long tmp;
801
802 if (!(tmp = get_zeroed_page(GFP_KERNEL)))
803 return -ENOMEM;
804
805 if (port->xmit_buf) {
806 free_page(tmp);
807 return -ERESTARTSYS;
808 }
809 port->xmit_buf = (unsigned char *) tmp;
810 }
d9afa435
JG		 811
812 spin_lock_irqsave(&riscom_lock, flags);
813
1da177e4
LT		 814 if (port->tty)
815 clear_bit(TTY_IO_ERROR, &port->tty->flags);
816
817 if (port->count == 1)
818 bp->count++;
819
820 port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
821 rc_change_speed(bp, port);
822 port->flags |= ASYNC_INITIALIZED;
823
d9afa435 824 spin_unlock_irqrestore(&riscom_lock, flags);
1da177e4
LT		 825 return 0;
826}
827
828/* Must be called with interrupts disabled */
829static void rc_shutdown_port(struct riscom_board *bp, struct riscom_port *port)
830{
831 struct tty_struct *tty;
832
833 if (!(port->flags & ASYNC_INITIALIZED))
834 return;
835
836#ifdef RC_REPORT_OVERRUN
837 printk(KERN_INFO "rc%d: port %d: Total %ld overruns were detected.\n",
838 board_No(bp), port_No(port), port->overrun);
839#endif
840#ifdef RC_REPORT_FIFO
841 {
842 int i;
843
844 printk(KERN_INFO "rc%d: port %d: FIFO hits [ ",
845 board_No(bp), port_No(port));
846 for (i = 0; i < 10; i++) {
847 printk("%ld ", port->hits[i]);
848 }
849 printk("].\n");
850 }
851#endif
852 if (port->xmit_buf) {
853 free_page((unsigned long) port->xmit_buf);
854 port->xmit_buf = NULL;
855 }
856
857 if (!(tty = port->tty) || C_HUPCL(tty)) {
858 /* Drop DTR */
859 bp->DTR |= (1u << port_No(port));
860 rc_out(bp, RC_DTR, bp->DTR);
861 }
862
863 /* Select port */
864 rc_out(bp, CD180_CAR, port_No(port));
865 /* Reset port */
866 rc_wait_CCR(bp);
867 rc_out(bp, CD180_CCR, CCR_SOFTRESET);
868 /* Disable all interrupts from this port */
869 port->IER = 0;
870 rc_out(bp, CD180_IER, port->IER);
871
872 if (tty)
873 set_bit(TTY_IO_ERROR, &tty->flags);
874 port->flags &= ~ASYNC_INITIALIZED;
875
876 if (--bp->count < 0) {
877 printk(KERN_INFO "rc%d: rc_shutdown_port: "
878 "bad board count: %d\n",
879 board_No(bp), bp->count);
880 bp->count = 0;
881 }
882
883 /*
884 * If this is the last opened port on the board
885 * shutdown whole board
886 */
887 if (!bp->count)
888 rc_shutdown_board(bp);
889}
890
891
892static int block_til_ready(struct tty_struct *tty, struct file * filp,
893 struct riscom_port *port)
894{
895 DECLARE_WAITQUEUE(wait, current);
896 struct riscom_board *bp = port_Board(port);
897 int retval;
898 int do_clocal = 0;
899 int CD;
d9afa435 900 unsigned long flags;
1da177e4
LT		 901
902 /*
903 * If the device is in the middle of being closed, then block
904 * until it's done, and then try again.
905 */
906 if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) {
907 interruptible_sleep_on(&port->close_wait);
908 if (port->flags & ASYNC_HUP_NOTIFY)
909 return -EAGAIN;
910 else
911 return -ERESTARTSYS;
912 }
913
914 /*
915 * If non-blocking mode is set, or the port is not enabled,
916 * then make the check up front and then exit.
917 */
918 if ((filp->f_flags & O_NONBLOCK) ||
919 (tty->flags & (1 << TTY_IO_ERROR))) {
920 port->flags |= ASYNC_NORMAL_ACTIVE;
921 return 0;
922 }
923
924 if (C_CLOCAL(tty))
925 do_clocal = 1;
926
927 /*
928 * Block waiting for the carrier detect and the line to become
929 * free (i.e., not in use by the callout). While we are in
930 * this loop, info->count is dropped by one, so that
931 * rs_close() knows when to free things. We restore it upon
932 * exit, either normal or abnormal.
933 */
934 retval = 0;
935 add_wait_queue(&port->open_wait, &wait);
d9afa435
JG		 936
937 spin_lock_irqsave(&riscom_lock, flags);
938
1da177e4
LT		 939 if (!tty_hung_up_p(filp))
940 port->count--;
d9afa435
JG		 941
942 spin_unlock_irqrestore(&riscom_lock, flags);
943
1da177e4
LT		 944 port->blocked_open++;
945 while (1) {
d9afa435
JG		 946 spin_lock_irqsave(&riscom_lock, flags);
947
1da177e4
LT		 948 rc_out(bp, CD180_CAR, port_No(port));
949 CD = rc_in(bp, CD180_MSVR) & MSVR_CD;
950 rc_out(bp, CD180_MSVR, MSVR_RTS);
951 bp->DTR &= ~(1u << port_No(port));
952 rc_out(bp, RC_DTR, bp->DTR);
d9afa435
JG		 953
954 spin_unlock_irqrestore(&riscom_lock, flags);
955
1da177e4
LT		 956 set_current_state(TASK_INTERRUPTIBLE);
957 if (tty_hung_up_p(filp) ||
958 !(port->flags & ASYNC_INITIALIZED)) {
959 if (port->flags & ASYNC_HUP_NOTIFY)
960 retval = -EAGAIN;
961 else
962 retval = -ERESTARTSYS;
963 break;
964 }
965 if (!(port->flags & ASYNC_CLOSING) &&
966 (do_clocal || CD))
967 break;
968 if (signal_pending(current)) {
969 retval = -ERESTARTSYS;
970 break;
971 }
972 schedule();
973 }
cc0a8fbb 974 __set_current_state(TASK_RUNNING);
1da177e4
LT		 975 remove_wait_queue(&port->open_wait, &wait);
976 if (!tty_hung_up_p(filp))
977 port->count++;
978 port->blocked_open--;
979 if (retval)
980 return retval;
981
982 port->flags |= ASYNC_NORMAL_ACTIVE;
983 return 0;
984}
985
986static int rc_open(struct tty_struct * tty, struct file * filp)
987{
988 int board;
989 int error;
990 struct riscom_port * port;
991 struct riscom_board * bp;
992
993 board = RC_BOARD(tty->index);
994 if (board >= RC_NBOARD || !(rc_board[board].flags & RC_BOARD_PRESENT))
995 return -ENODEV;
996
997 bp = &rc_board[board];
998 port = rc_port + board * RC_NPORT + RC_PORT(tty->index);
999 if (rc_paranoia_check(port, tty->name, "rc_open"))
1000 return -ENODEV;
1001
1002 if ((error = rc_setup_board(bp)))
1003 return error;
1004
1005 port->count++;
1006 tty->driver_data = port;
1007 port->tty = tty;
1008
1009 if ((error = rc_setup_port(bp, port)))
1010 return error;
1011
1012 if ((error = block_til_ready(tty, filp, port)))
1013 return error;
1014
1015 return 0;
1016}
1017
1018static void rc_close(struct tty_struct * tty, struct file * filp)
1019{
1020 struct riscom_port *port = (struct riscom_port *) tty->driver_data;
1021 struct riscom_board *bp;
1022 unsigned long flags;
1023 unsigned long timeout;
1024
1025 if (!port || rc_paranoia_check(port, tty->name, "close"))
1026 return;
d9afa435
JG		 1027
1028 spin_lock_irqsave(&riscom_lock, flags);
1029
1da177e4
LT		 1030 if (tty_hung_up_p(filp))
1031 goto out;
1032
1033 bp = port_Board(port);
1034 if ((tty->count == 1) && (port->count != 1)) {
1035 printk(KERN_INFO "rc%d: rc_close: bad port count;"
1036 " tty->count is 1, port count is %d\n",
1037 board_No(bp), port->count);
1038 port->count = 1;
1039 }
1040 if (--port->count < 0) {
1041 printk(KERN_INFO "rc%d: rc_close: bad port count "
1042 "for tty%d: %d\n",
1043 board_No(bp), port_No(port), port->count);
1044 port->count = 0;
1045 }
1046 if (port->count)
1047 goto out;
1048 port->flags |= ASYNC_CLOSING;
1049 /*
1050 * Now we wait for the transmit buffer to clear; and we notify
1051 * the line discipline to only process XON/XOFF characters.
1052 */
1053 tty->closing = 1;
1054 if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE)
1055 tty_wait_until_sent(tty, port->closing_wait);
1056 /*
1057 * At this point we stop accepting input. To do this, we
1058 * disable the receive line status interrupts, and tell the
1059 * interrupt driver to stop checking the data ready bit in the
1060 * line status register.
1061 */
1062 port->IER &= ~IER_RXD;
1063 if (port->flags & ASYNC_INITIALIZED) {
1064 port->IER &= ~IER_TXRDY;
1065 port->IER |= IER_TXEMPTY;
1066 rc_out(bp, CD180_CAR, port_No(port));
1067 rc_out(bp, CD180_IER, port->IER);
1068 /*
1069 * Before we drop DTR, make sure the UART transmitter
1070 * has completely drained; this is especially
1071 * important if there is a transmit FIFO!
1072 */
1073 timeout = jiffies+HZ;
1074 while(port->IER & IER_TXEMPTY) {
1075 msleep_interruptible(jiffies_to_msecs(port->timeout));
1076 if (time_after(jiffies, timeout))
1077 break;
1078 }
1079 }
1080 rc_shutdown_port(bp, port);
1081 if (tty->driver->flush_buffer)
1082 tty->driver->flush_buffer(tty);
1083 tty_ldisc_flush(tty);
1084
1085 tty->closing = 0;
1da177e4
LT		 1086 port->tty = NULL;
1087 if (port->blocked_open) {
1088 if (port->close_delay) {
1089 msleep_interruptible(jiffies_to_msecs(port->close_delay));
1090 }
1091 wake_up_interruptible(&port->open_wait);
1092 }
1093 port->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
1094 wake_up_interruptible(&port->close_wait);
d9afa435
JG		 1095
1096out:
1097 spin_unlock_irqrestore(&riscom_lock, flags);
1da177e4
LT		 1098}
1099
1100static int rc_write(struct tty_struct * tty,
1101 const unsigned char *buf, int count)
1102{
1103 struct riscom_port *port = (struct riscom_port *)tty->driver_data;
1104 struct riscom_board *bp;
1105 int c, total = 0;
1106 unsigned long flags;
1107
1108 if (rc_paranoia_check(port, tty->name, "rc_write"))
1109 return 0;
1110
1111 bp = port_Board(port);
1112
b3218a79 1113 if (!tty || !port->xmit_buf)
1da177e4
LT		 1114 return 0;
1115
1da177e4 1116 while (1) {
d9afa435
JG		 1117 spin_lock_irqsave(&riscom_lock, flags);
1118
1da177e4
LT		 1119 c = min_t(int, count, min(SERIAL_XMIT_SIZE - port->xmit_cnt - 1,
1120 SERIAL_XMIT_SIZE - port->xmit_head));
d9afa435
JG		 1121 if (c <= 0)
1122 break; /* lock continues to be held */
1da177e4
LT		 1123
1124 memcpy(port->xmit_buf + port->xmit_head, buf, c);
1125 port->xmit_head = (port->xmit_head + c) & (SERIAL_XMIT_SIZE-1);
1126 port->xmit_cnt += c;
d9afa435
JG		 1127
1128 spin_unlock_irqrestore(&riscom_lock, flags);
1da177e4
LT		 1129
1130 buf += c;
1131 count -= c;
1132 total += c;
1133 }
1134
1da177e4
LT		 1135 if (port->xmit_cnt && !tty->stopped && !tty->hw_stopped &&
1136 !(port->IER & IER_TXRDY)) {
1137 port->IER |= IER_TXRDY;
1138 rc_out(bp, CD180_CAR, port_No(port));
1139 rc_out(bp, CD180_IER, port->IER);
1140 }
d9afa435
JG		 1141
1142 spin_unlock_irqrestore(&riscom_lock, flags);
1da177e4
LT		 1143
1144 return total;
1145}
1146
1147static void rc_put_char(struct tty_struct * tty, unsigned char ch)
1148{
1149 struct riscom_port *port = (struct riscom_port *)tty->driver_data;
1150 unsigned long flags;
1151
1152 if (rc_paranoia_check(port, tty->name, "rc_put_char"))
1153 return;
1154
1155 if (!tty || !port->xmit_buf)
1156 return;
1157
d9afa435 1158 spin_lock_irqsave(&riscom_lock, flags);
1da177e4
LT		 1159
1160 if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1)
1161 goto out;
1162
1163 port->xmit_buf[port->xmit_head++] = ch;
1164 port->xmit_head &= SERIAL_XMIT_SIZE - 1;
1165 port->xmit_cnt++;
d9afa435
JG		 1166
1167out:
1168 spin_unlock_irqrestore(&riscom_lock, flags);
1da177e4
LT		 1169}
1170
1171static void rc_flush_chars(struct tty_struct * tty)
1172{
1173 struct riscom_port *port = (struct riscom_port *)tty->driver_data;
1174 unsigned long flags;
1175
1176 if (rc_paranoia_check(port, tty->name, "rc_flush_chars"))
1177 return;
1178
1179 if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
1180 !port->xmit_buf)
1181 return;
1182
d9afa435
JG		 1183 spin_lock_irqsave(&riscom_lock, flags);
1184
1da177e4
LT		 1185 port->IER |= IER_TXRDY;
1186 rc_out(port_Board(port), CD180_CAR, port_No(port));
1187 rc_out(port_Board(port), CD180_IER, port->IER);
d9afa435
JG		 1188
1189 spin_unlock_irqrestore(&riscom_lock, flags);
1da177e4
LT		 1190}
1191
1192static int rc_write_room(struct tty_struct * tty)
1193{
1194 struct riscom_port *port = (struct riscom_port *)tty->driver_data;
1195 int ret;
1196
1197 if (rc_paranoia_check(port, tty->name, "rc_write_room"))
1198 return 0;
1199
1200 ret = SERIAL_XMIT_SIZE - port->xmit_cnt - 1;
1201 if (ret < 0)
1202 ret = 0;
1203 return ret;
1204}
1205
1206static int rc_chars_in_buffer(struct tty_struct *tty)
1207{
1208 struct riscom_port *port = (struct riscom_port *)tty->driver_data;
1209
1210 if (rc_paranoia_check(port, tty->name, "rc_chars_in_buffer"))
1211 return 0;
1212
1213 return port->xmit_cnt;
1214}
1215
1216static void rc_flush_buffer(struct tty_struct *tty)
1217{
1218 struct riscom_port *port = (struct riscom_port *)tty->driver_data;
1219 unsigned long flags;
1220
1221 if (rc_paranoia_check(port, tty->name, "rc_flush_buffer"))
1222 return;
1223
d9afa435
JG		 1224 spin_lock_irqsave(&riscom_lock, flags);
1225
1da177e4 1226 port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
d9afa435
JG		 1227
1228 spin_unlock_irqrestore(&riscom_lock, flags);
1da177e4 1229
1da177e4
LT		 1230 tty_wakeup(tty);
1231}
1232
1233static int rc_tiocmget(struct tty_struct *tty, struct file *file)
1234{
1235 struct riscom_port *port = (struct riscom_port *)tty->driver_data;
1236 struct riscom_board * bp;
1237 unsigned char status;
1238 unsigned int result;
1239 unsigned long flags;
1240
1241 if (rc_paranoia_check(port, tty->name, __FUNCTION__))
1242 return -ENODEV;
1243
1244 bp = port_Board(port);
d9afa435
JG		 1245
1246 spin_lock_irqsave(&riscom_lock, flags);
1247
1da177e4
LT		 1248 rc_out(bp, CD180_CAR, port_No(port));
1249 status = rc_in(bp, CD180_MSVR);
1250 result = rc_in(bp, RC_RI) & (1u << port_No(port)) ? 0 : TIOCM_RNG;
d9afa435
JG		 1251
1252 spin_unlock_irqrestore(&riscom_lock, flags);
1253
1da177e4
LT		 1254 result |= ((status & MSVR_RTS) ? TIOCM_RTS : 0)
1255 | ((status & MSVR_DTR) ? TIOCM_DTR : 0)
1256 | ((status & MSVR_CD) ? TIOCM_CAR : 0)
1257 | ((status & MSVR_DSR) ? TIOCM_DSR : 0)
1258 | ((status & MSVR_CTS) ? TIOCM_CTS : 0);
1259 return result;
1260}
1261
1262static int rc_tiocmset(struct tty_struct *tty, struct file *file,
1263 unsigned int set, unsigned int clear)
1264{
1265 struct riscom_port *port = (struct riscom_port *)tty->driver_data;
1266 unsigned long flags;
1267 struct riscom_board *bp;
1268
1269 if (rc_paranoia_check(port, tty->name, __FUNCTION__))
1270 return -ENODEV;
1271
1272 bp = port_Board(port);
1273
d9afa435
JG		 1274 spin_lock_irqsave(&riscom_lock, flags);
1275
1da177e4
LT		 1276 if (set & TIOCM_RTS)
1277 port->MSVR |= MSVR_RTS;
1278 if (set & TIOCM_DTR)
1279 bp->DTR &= ~(1u << port_No(port));
1280
1281 if (clear & TIOCM_RTS)
1282 port->MSVR &= ~MSVR_RTS;
1283 if (clear & TIOCM_DTR)
1284 bp->DTR |= (1u << port_No(port));
1285
1286 rc_out(bp, CD180_CAR, port_No(port));
1287 rc_out(bp, CD180_MSVR, port->MSVR);
1288 rc_out(bp, RC_DTR, bp->DTR);
d9afa435
JG		 1289
1290 spin_unlock_irqrestore(&riscom_lock, flags);
1291
1da177e4
LT		 1292 return 0;
1293}
1294
1295static inline void rc_send_break(struct riscom_port * port, unsigned long length)
1296{
1297 struct riscom_board *bp = port_Board(port);
1298 unsigned long flags;
1299
d9afa435
JG		 1300 spin_lock_irqsave(&riscom_lock, flags);
1301
1da177e4
LT		 1302 port->break_length = RISCOM_TPS / HZ * length;
1303 port->COR2 |= COR2_ETC;
1304 port->IER |= IER_TXRDY;
1305 rc_out(bp, CD180_CAR, port_No(port));
1306 rc_out(bp, CD180_COR2, port->COR2);
1307 rc_out(bp, CD180_IER, port->IER);
1308 rc_wait_CCR(bp);
1309 rc_out(bp, CD180_CCR, CCR_CORCHG2);
1310 rc_wait_CCR(bp);
d9afa435
JG		 1311
1312 spin_unlock_irqrestore(&riscom_lock, flags);
1da177e4
LT		 1313}
1314
1315static inline int rc_set_serial_info(struct riscom_port * port,
1316 struct serial_struct __user * newinfo)
1317{
1318 struct serial_struct tmp;
1319 struct riscom_board *bp = port_Board(port);
1320 int change_speed;
1da177e4
LT		 1321
1322 if (copy_from_user(&tmp, newinfo, sizeof(tmp)))
1323 return -EFAULT;
1324
1325#if 0
1326 if ((tmp.irq != bp->irq) ||
1327 (tmp.port != bp->base) ||
1328 (tmp.type != PORT_CIRRUS) ||
1329 (tmp.baud_base != (RC_OSCFREQ + CD180_TPC/2) / CD180_TPC) ||
1330 (tmp.custom_divisor != 0) ||
1331 (tmp.xmit_fifo_size != CD180_NFIFO) ||
1332 (tmp.flags & ~RISCOM_LEGAL_FLAGS))
1333 return -EINVAL;
1334#endif
1335
1336 change_speed = ((port->flags & ASYNC_SPD_MASK) !=
1337 (tmp.flags & ASYNC_SPD_MASK));
1338
1339 if (!capable(CAP_SYS_ADMIN)) {
1340 if ((tmp.close_delay != port->close_delay) ||
1341 (tmp.closing_wait != port->closing_wait) ||
1342 ((tmp.flags & ~ASYNC_USR_MASK) !=
1343 (port->flags & ~ASYNC_USR_MASK)))
1344 return -EPERM;
1345 port->flags = ((port->flags & ~ASYNC_USR_MASK) |
1346 (tmp.flags & ASYNC_USR_MASK));
1347 } else {
1348 port->flags = ((port->flags & ~ASYNC_FLAGS) |
1349 (tmp.flags & ASYNC_FLAGS));
1350 port->close_delay = tmp.close_delay;
1351 port->closing_wait = tmp.closing_wait;
1352 }
1353 if (change_speed) {
d9afa435
JG		 1354 unsigned long flags;
1355
1356 spin_lock_irqsave(&riscom_lock, flags);
1da177e4 1357 rc_change_speed(bp, port);
d9afa435 1358 spin_unlock_irqrestore(&riscom_lock, flags);
1da177e4
LT		 1359 }
1360 return 0;
1361}
1362
1363static inline int rc_get_serial_info(struct riscom_port * port,
1364 struct serial_struct __user *retinfo)
1365{
1366 struct serial_struct tmp;
1367 struct riscom_board *bp = port_Board(port);
1368
1369 memset(&tmp, 0, sizeof(tmp));
1370 tmp.type = PORT_CIRRUS;
1371 tmp.line = port - rc_port;
1372 tmp.port = bp->base;
1373 tmp.irq = bp->irq;
1374 tmp.flags = port->flags;
1375 tmp.baud_base = (RC_OSCFREQ + CD180_TPC/2) / CD180_TPC;
1376 tmp.close_delay = port->close_delay * HZ/100;
1377 tmp.closing_wait = port->closing_wait * HZ/100;
1378 tmp.xmit_fifo_size = CD180_NFIFO;
1379 return copy_to_user(retinfo, &tmp, sizeof(tmp)) ? -EFAULT : 0;
1380}
1381
1382static int rc_ioctl(struct tty_struct * tty, struct file * filp,
1383 unsigned int cmd, unsigned long arg)
1384
1385{
1386 struct riscom_port *port = (struct riscom_port *)tty->driver_data;
1387 void __user *argp = (void __user *)arg;
1388 int retval;
1389
1390 if (rc_paranoia_check(port, tty->name, "rc_ioctl"))
1391 return -ENODEV;
1392
1393 switch (cmd) {
1394 case TCSBRK: /* SVID version: non-zero arg --> no break */
1395 retval = tty_check_change(tty);
1396 if (retval)
1397 return retval;
1398 tty_wait_until_sent(tty, 0);
1399 if (!arg)
1400 rc_send_break(port, HZ/4); /* 1/4 second */
1401 break;
1402 case TCSBRKP: /* support for POSIX tcsendbreak() */
1403 retval = tty_check_change(tty);
1404 if (retval)
1405 return retval;
1406 tty_wait_until_sent(tty, 0);
1407 rc_send_break(port, arg ? arg*(HZ/10) : HZ/4);
1408 break;
1409 case TIOCGSOFTCAR:
1410 return put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned __user *)argp);
1411 case TIOCSSOFTCAR:
1412 if (get_user(arg,(unsigned __user *) argp))
1413 return -EFAULT;
1414 tty->termios->c_cflag =
1415 ((tty->termios->c_cflag & ~CLOCAL) |
1416 (arg ? CLOCAL : 0));
1417 break;
1418 case TIOCGSERIAL:
1419 return rc_get_serial_info(port, argp);
1420 case TIOCSSERIAL:
1421 return rc_set_serial_info(port, argp);
1422 default:
1423 return -ENOIOCTLCMD;
1424 }
1425 return 0;
1426}
1427
1428static void rc_throttle(struct tty_struct * tty)
1429{
1430 struct riscom_port *port = (struct riscom_port *)tty->driver_data;
1431 struct riscom_board *bp;
1432 unsigned long flags;
1433
1434 if (rc_paranoia_check(port, tty->name, "rc_throttle"))
1435 return;
1436
1437 bp = port_Board(port);
d9afa435
JG		 1438
1439 spin_lock_irqsave(&riscom_lock, flags);
1440
1da177e4
LT		 1441 port->MSVR &= ~MSVR_RTS;
1442 rc_out(bp, CD180_CAR, port_No(port));
d9afa435 1443 if (I_IXOFF(tty)) {
1da177e4
LT		 1444 rc_wait_CCR(bp);
1445 rc_out(bp, CD180_CCR, CCR_SSCH2);
1446 rc_wait_CCR(bp);
1447 }
1448 rc_out(bp, CD180_MSVR, port->MSVR);
d9afa435
JG		 1449
1450 spin_unlock_irqrestore(&riscom_lock, flags);
1da177e4
LT		 1451}
1452
1453static void rc_unthrottle(struct tty_struct * tty)
1454{
1455 struct riscom_port *port = (struct riscom_port *)tty->driver_data;
1456 struct riscom_board *bp;
1457 unsigned long flags;
1458
1459 if (rc_paranoia_check(port, tty->name, "rc_unthrottle"))
1460 return;
1461
1462 bp = port_Board(port);
1463
d9afa435
JG		 1464 spin_lock_irqsave(&riscom_lock, flags);
1465
1da177e4
LT		 1466 port->MSVR |= MSVR_RTS;
1467 rc_out(bp, CD180_CAR, port_No(port));
1468 if (I_IXOFF(tty)) {
1469 rc_wait_CCR(bp);
1470 rc_out(bp, CD180_CCR, CCR_SSCH1);
1471 rc_wait_CCR(bp);
1472 }
1473 rc_out(bp, CD180_MSVR, port->MSVR);
d9afa435
JG		 1474
1475 spin_unlock_irqrestore(&riscom_lock, flags);
1da177e4
LT		 1476}
1477
1478static void rc_stop(struct tty_struct * tty)
1479{
1480 struct riscom_port *port = (struct riscom_port *)tty->driver_data;
1481 struct riscom_board *bp;
1482 unsigned long flags;
1483
1484 if (rc_paranoia_check(port, tty->name, "rc_stop"))
1485 return;
1486
1487 bp = port_Board(port);
1488
d9afa435
JG		 1489 spin_lock_irqsave(&riscom_lock, flags);
1490
1da177e4
LT		 1491 port->IER &= ~IER_TXRDY;
1492 rc_out(bp, CD180_CAR, port_No(port));
1493 rc_out(bp, CD180_IER, port->IER);
d9afa435
JG		 1494
1495 spin_unlock_irqrestore(&riscom_lock, flags);
1da177e4
LT		 1496}
1497
1498static void rc_start(struct tty_struct * tty)
1499{
1500 struct riscom_port *port = (struct riscom_port *)tty->driver_data;
1501 struct riscom_board *bp;
1502 unsigned long flags;
1503
1504 if (rc_paranoia_check(port, tty->name, "rc_start"))
1505 return;
1506
1507 bp = port_Board(port);
1508
d9afa435
JG		 1509 spin_lock_irqsave(&riscom_lock, flags);
1510
1da177e4
LT		 1511 if (port->xmit_cnt && port->xmit_buf && !(port->IER & IER_TXRDY)) {
1512 port->IER |= IER_TXRDY;
1513 rc_out(bp, CD180_CAR, port_No(port));
1514 rc_out(bp, CD180_IER, port->IER);
1515 }
d9afa435
JG		 1516
1517 spin_unlock_irqrestore(&riscom_lock, flags);
1da177e4
LT		 1518}
1519
1da177e4
LT		 1520static void rc_hangup(struct tty_struct * tty)
1521{
1522 struct riscom_port *port = (struct riscom_port *)tty->driver_data;
1523 struct riscom_board *bp;
1524
1525 if (rc_paranoia_check(port, tty->name, "rc_hangup"))
1526 return;
1527
1528 bp = port_Board(port);
1529
1530 rc_shutdown_port(bp, port);
1da177e4
LT		 1531 port->count = 0;
1532 port->flags &= ~ASYNC_NORMAL_ACTIVE;
1533 port->tty = NULL;
1534 wake_up_interruptible(&port->open_wait);
1535}
1536
606d099c 1537static void rc_set_termios(struct tty_struct * tty, struct ktermios * old_termios)
1da177e4
LT		 1538{
1539 struct riscom_port *port = (struct riscom_port *)tty->driver_data;
1540 unsigned long flags;
1541
1542 if (rc_paranoia_check(port, tty->name, "rc_set_termios"))
1543 return;
1544
1545 if (tty->termios->c_cflag == old_termios->c_cflag &&
1546 tty->termios->c_iflag == old_termios->c_iflag)
1547 return;
1548
d9afa435 1549 spin_lock_irqsave(&riscom_lock, flags);
1da177e4 1550 rc_change_speed(port_Board(port), port);
d9afa435 1551 spin_unlock_irqrestore(&riscom_lock, flags);
1da177e4
LT		 1552
1553 if ((old_termios->c_cflag & CRTSCTS) &&
1554 !(tty->termios->c_cflag & CRTSCTS)) {
1555 tty->hw_stopped = 0;
1556 rc_start(tty);
1557 }
1558}
1559
b68e31d0 1560static const struct tty_operations riscom_ops = {
1da177e4
LT		 1561 .open = rc_open,
1562 .close = rc_close,
1563 .write = rc_write,
1564 .put_char = rc_put_char,
1565 .flush_chars = rc_flush_chars,
1566 .write_room = rc_write_room,
1567 .chars_in_buffer = rc_chars_in_buffer,
1568 .flush_buffer = rc_flush_buffer,
1569 .ioctl = rc_ioctl,
1570 .throttle = rc_throttle,
1571 .unthrottle = rc_unthrottle,
1572 .set_termios = rc_set_termios,
1573 .stop = rc_stop,
1574 .start = rc_start,
1575 .hangup = rc_hangup,
1576 .tiocmget = rc_tiocmget,
1577 .tiocmset = rc_tiocmset,
1578};
1579
1386a820 1580static int __init rc_init_drivers(void)
1da177e4
LT		 1581{
1582 int error;
1583 int i;
1584
1585 riscom_driver = alloc_tty_driver(RC_NBOARD * RC_NPORT);
1586 if (!riscom_driver)
1587 return -ENOMEM;
1588
1da177e4
LT		 1589 riscom_driver->owner = THIS_MODULE;
1590 riscom_driver->name = "ttyL";
1da177e4
LT		 1591 riscom_driver->major = RISCOM8_NORMAL_MAJOR;
1592 riscom_driver->type = TTY_DRIVER_TYPE_SERIAL;
1593 riscom_driver->subtype = SERIAL_TYPE_NORMAL;
1594 riscom_driver->init_termios = tty_std_termios;
1595 riscom_driver->init_termios.c_cflag =
1596 B9600 | CS8 | CREAD | HUPCL | CLOCAL;
606d099c
AC		 1597 riscom_driver->init_termios.c_ispeed = 9600;
1598 riscom_driver->init_termios.c_ospeed = 9600;
1da177e4
LT		 1599 riscom_driver->flags = TTY_DRIVER_REAL_RAW;
1600 tty_set_operations(riscom_driver, &riscom_ops);
1601 if ((error = tty_register_driver(riscom_driver))) {
1da177e4
LT		 1602 put_tty_driver(riscom_driver);
1603 printk(KERN_ERR "rc: Couldn't register RISCom/8 driver, "
1604 "error = %d\n",
1605 error);
1606 return 1;
1607 }
1608
1609 memset(rc_port, 0, sizeof(rc_port));
1610 for (i = 0; i < RC_NPORT * RC_NBOARD; i++) {
1611 rc_port[i].magic = RISCOM8_MAGIC;
1da177e4
LT		 1612 rc_port[i].close_delay = 50 * HZ/100;
1613 rc_port[i].closing_wait = 3000 * HZ/100;
1614 init_waitqueue_head(&rc_port[i].open_wait);
1615 init_waitqueue_head(&rc_port[i].close_wait);
1616 }
1617
1618 return 0;
1619}
1620
1621static void rc_release_drivers(void)
1622{
1da177e4
LT		 1623 tty_unregister_driver(riscom_driver);
1624 put_tty_driver(riscom_driver);
1da177e4
LT		 1625}
1626
1627#ifndef MODULE
1628/*
1629 * Called at boot time.
1630 *
1631 * You can specify IO base for up to RC_NBOARD cards,
1632 * using line "riscom8=0xiobase1,0xiobase2,.." at LILO prompt.
1633 * Note that there will be no probing at default
1634 * addresses in this case.
1635 *
1636 */
1637static int __init riscom8_setup(char *str)
1638{
1639 int ints[RC_NBOARD];
1640 int i;
1641
1642 str = get_options(str, ARRAY_SIZE(ints), ints);
1643
1644 for (i = 0; i < RC_NBOARD; i++) {
1645 if (i < ints[0])
1646 rc_board[i].base = ints[i+1];
1647 else
1648 rc_board[i].base = 0;
1649 }
1650 return 1;
1651}
1652
1653__setup("riscom8=", riscom8_setup);
1654#endif
1655
1656static char banner[] __initdata =
1657 KERN_INFO "rc: SDL RISCom/8 card driver v1.1, (c) D.Gorodchanin "
1658 "1994-1996.\n";
1659static char no_boards_msg[] __initdata =
1660 KERN_INFO "rc: No RISCom/8 boards detected.\n";
1661
1662/*
1663 * This routine must be called by kernel at boot time
1664 */
1665static int __init riscom8_init(void)
1666{
1667 int i;
1668 int found = 0;
1669
1670 printk(banner);
1671
1672 if (rc_init_drivers())
1673 return -EIO;
1674
1675 for (i = 0; i < RC_NBOARD; i++)
1676 if (rc_board[i].base && !rc_probe(&rc_board[i]))
1677 found++;
1678
1679 if (!found) {
1680 rc_release_drivers();
1681 printk(no_boards_msg);
1682 return -EIO;
1683 }
1684 return 0;
1685}
1686
1687#ifdef MODULE
1688static int iobase;
1689static int iobase1;
1690static int iobase2;
1691static int iobase3;
8d3b33f6
RR		 1692module_param(iobase, int, 0);
1693module_param(iobase1, int, 0);
1694module_param(iobase2, int, 0);
1695module_param(iobase3, int, 0);
1da177e4
LT		 1696
1697MODULE_LICENSE("GPL");
1698#endif /* MODULE */
1699
1700/*
1701 * You can setup up to 4 boards (current value of RC_NBOARD)
1702 * by specifying "iobase=0xXXX iobase1=0xXXX ..." as insmod parameter.
1703 *
1704 */
1705static int __init riscom8_init_module (void)
1706{
1707#ifdef MODULE
1708 int i;
1709
1710 if (iobase || iobase1 || iobase2 || iobase3) {
1711 for(i = 0; i < RC_NBOARD; i++)
9efda797 1712 rc_board[i].base = 0;
1da177e4
LT		 1713 }
1714
1715 if (iobase)
1716 rc_board[0].base = iobase;
1717 if (iobase1)
1718 rc_board[1].base = iobase1;
1719 if (iobase2)
1720 rc_board[2].base = iobase2;
1721 if (iobase3)
1722 rc_board[3].base = iobase3;
1723#endif /* MODULE */
1724
1725 return riscom8_init();
1726}
1727
1728static void __exit riscom8_exit_module (void)
1729{
1730 int i;
1731
1732 rc_release_drivers();
1733 for (i = 0; i < RC_NBOARD; i++)
1734 if (rc_board[i].flags & RC_BOARD_PRESENT)
1735 rc_release_io_range(&rc_board[i]);
1736
1737}
1738
1739module_init(riscom8_init_module);
1740module_exit(riscom8_exit_module);
1741
Linux kernel - Deliverables
This page took 0.402403 seconds and 5 git commands to generate.