projects / deliverable / linux.git / blame
| Commit | Line | Data |
|---|---|---|
| 50667d63 LW |
1 | /* |
| 2 | * U300 clock implementation | |
| 3 | * Copyright (C) 2007-2012 ST-Ericsson AB | |
| 4 | * License terms: GNU General Public License (GPL) version 2 | |
| 5 | * Author: Linus Walleij <linus.walleij@stericsson.com> | |
| 6 | * Author: Jonas Aaberg <jonas.aberg@stericsson.com> | |
| 7 | */ | |
| 8 | #include <linux/clk.h> | |
| 9 | #include <linux/clkdev.h> | |
| 10 | #include <linux/err.h> | |
| 11 | #include <linux/io.h> | |
| 12 | #include <linux/clk-provider.h> | |
| 13 | #include <linux/spinlock.h> | |
| 14c26071 | 14 | #include <linux/of.h> |
| 0004b017 LW |
15 | |
| 16 | /* APP side SYSCON registers */ | |
| 17 | /* CLK Control Register 16bit (R/W) */ | |
| 18 | #define U300_SYSCON_CCR (0x0000) | |
| 19 | #define U300_SYSCON_CCR_I2S1_USE_VCXO (0x0040) | |
| 20 | #define U300_SYSCON_CCR_I2S0_USE_VCXO (0x0020) | |
| 21 | #define U300_SYSCON_CCR_TURN_VCXO_ON (0x0008) | |
| 22 | #define U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK (0x0007) | |
| 23 | #define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER (0x04) | |
| 24 | #define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW (0x03) | |
| 25 | #define U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE (0x02) | |
| 26 | #define U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH (0x01) | |
| 27 | #define U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST (0x00) | |
| 28 | /* CLK Status Register 16bit (R/W) */ | |
| 29 | #define U300_SYSCON_CSR (0x0004) | |
| 30 | #define U300_SYSCON_CSR_PLL208_LOCK_IND (0x0002) | |
| 31 | #define U300_SYSCON_CSR_PLL13_LOCK_IND (0x0001) | |
| 32 | /* Reset lines for SLOW devices 16bit (R/W) */ | |
| 33 | #define U300_SYSCON_RSR (0x0014) | |
| 34 | #define U300_SYSCON_RSR_PPM_RESET_EN (0x0200) | |
| 35 | #define U300_SYSCON_RSR_ACC_TMR_RESET_EN (0x0100) | |
| 36 | #define U300_SYSCON_RSR_APP_TMR_RESET_EN (0x0080) | |
| 37 | #define U300_SYSCON_RSR_RTC_RESET_EN (0x0040) | |
| 38 | #define U300_SYSCON_RSR_KEYPAD_RESET_EN (0x0020) | |
| 39 | #define U300_SYSCON_RSR_GPIO_RESET_EN (0x0010) | |
| 40 | #define U300_SYSCON_RSR_EH_RESET_EN (0x0008) | |
| 41 | #define U300_SYSCON_RSR_BTR_RESET_EN (0x0004) | |
| 42 | #define U300_SYSCON_RSR_UART_RESET_EN (0x0002) | |
| 43 | #define U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN (0x0001) | |
| 44 | /* Reset lines for FAST devices 16bit (R/W) */ | |
| 45 | #define U300_SYSCON_RFR (0x0018) | |
| 46 | #define U300_SYSCON_RFR_UART1_RESET_ENABLE (0x0080) | |
| 47 | #define U300_SYSCON_RFR_SPI_RESET_ENABLE (0x0040) | |
| 48 | #define U300_SYSCON_RFR_MMC_RESET_ENABLE (0x0020) | |
| 49 | #define U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE (0x0010) | |
| 50 | #define U300_SYSCON_RFR_PCM_I2S0_RESET_ENABLE (0x0008) | |
| 51 | #define U300_SYSCON_RFR_I2C1_RESET_ENABLE (0x0004) | |
| 52 | #define U300_SYSCON_RFR_I2C0_RESET_ENABLE (0x0002) | |
| 53 | #define U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE (0x0001) | |
| 54 | /* Reset lines for the rest of the peripherals 16bit (R/W) */ | |
| 55 | #define U300_SYSCON_RRR (0x001c) | |
| 56 | #define U300_SYSCON_RRR_CDS_RESET_EN (0x4000) | |
| 57 | #define U300_SYSCON_RRR_ISP_RESET_EN (0x2000) | |
| 58 | #define U300_SYSCON_RRR_INTCON_RESET_EN (0x1000) | |
| 59 | #define U300_SYSCON_RRR_MSPRO_RESET_EN (0x0800) | |
| 60 | #define U300_SYSCON_RRR_XGAM_RESET_EN (0x0100) | |
| 61 | #define U300_SYSCON_RRR_XGAM_VC_SYNC_RESET_EN (0x0080) | |
| 62 | #define U300_SYSCON_RRR_NANDIF_RESET_EN (0x0040) | |
| 63 | #define U300_SYSCON_RRR_EMIF_RESET_EN (0x0020) | |
| 64 | #define U300_SYSCON_RRR_DMAC_RESET_EN (0x0010) | |
| 65 | #define U300_SYSCON_RRR_CPU_RESET_EN (0x0008) | |
| 66 | #define U300_SYSCON_RRR_APEX_RESET_EN (0x0004) | |
| 67 | #define U300_SYSCON_RRR_AHB_RESET_EN (0x0002) | |
| 68 | #define U300_SYSCON_RRR_AAIF_RESET_EN (0x0001) | |
| 69 | /* Clock enable for SLOW peripherals 16bit (R/W) */ | |
| 70 | #define U300_SYSCON_CESR (0x0020) | |
| 71 | #define U300_SYSCON_CESR_PPM_CLK_EN (0x0200) | |
| 72 | #define U300_SYSCON_CESR_ACC_TMR_CLK_EN (0x0100) | |
| 73 | #define U300_SYSCON_CESR_APP_TMR_CLK_EN (0x0080) | |
| 74 | #define U300_SYSCON_CESR_KEYPAD_CLK_EN (0x0040) | |
| 75 | #define U300_SYSCON_CESR_GPIO_CLK_EN (0x0010) | |
| 76 | #define U300_SYSCON_CESR_EH_CLK_EN (0x0008) | |
| 77 | #define U300_SYSCON_CESR_BTR_CLK_EN (0x0004) | |
| 78 | #define U300_SYSCON_CESR_UART_CLK_EN (0x0002) | |
| 79 | #define U300_SYSCON_CESR_SLOW_BRIDGE_CLK_EN (0x0001) | |
| 80 | /* Clock enable for FAST peripherals 16bit (R/W) */ | |
| 81 | #define U300_SYSCON_CEFR (0x0024) | |
| 82 | #define U300_SYSCON_CEFR_UART1_CLK_EN (0x0200) | |
| 83 | #define U300_SYSCON_CEFR_I2S1_CORE_CLK_EN (0x0100) | |
| 84 | #define U300_SYSCON_CEFR_I2S0_CORE_CLK_EN (0x0080) | |
| 85 | #define U300_SYSCON_CEFR_SPI_CLK_EN (0x0040) | |
| 86 | #define U300_SYSCON_CEFR_MMC_CLK_EN (0x0020) | |
| 87 | #define U300_SYSCON_CEFR_I2S1_CLK_EN (0x0010) | |
| 88 | #define U300_SYSCON_CEFR_I2S0_CLK_EN (0x0008) | |
| 89 | #define U300_SYSCON_CEFR_I2C1_CLK_EN (0x0004) | |
| 90 | #define U300_SYSCON_CEFR_I2C0_CLK_EN (0x0002) | |
| 91 | #define U300_SYSCON_CEFR_FAST_BRIDGE_CLK_EN (0x0001) | |
| 92 | /* Clock enable for the rest of the peripherals 16bit (R/W) */ | |
| 93 | #define U300_SYSCON_CERR (0x0028) | |
| 94 | #define U300_SYSCON_CERR_CDS_CLK_EN (0x2000) | |
| 95 | #define U300_SYSCON_CERR_ISP_CLK_EN (0x1000) | |
| 96 | #define U300_SYSCON_CERR_MSPRO_CLK_EN (0x0800) | |
| 97 | #define U300_SYSCON_CERR_AHB_SUBSYS_BRIDGE_CLK_EN (0x0400) | |
| 98 | #define U300_SYSCON_CERR_SEMI_CLK_EN (0x0200) | |
| 99 | #define U300_SYSCON_CERR_XGAM_CLK_EN (0x0100) | |
| 100 | #define U300_SYSCON_CERR_VIDEO_ENC_CLK_EN (0x0080) | |
| 101 | #define U300_SYSCON_CERR_NANDIF_CLK_EN (0x0040) | |
| 102 | #define U300_SYSCON_CERR_EMIF_CLK_EN (0x0020) | |
| 103 | #define U300_SYSCON_CERR_DMAC_CLK_EN (0x0010) | |
| 104 | #define U300_SYSCON_CERR_CPU_CLK_EN (0x0008) | |
| 105 | #define U300_SYSCON_CERR_APEX_CLK_EN (0x0004) | |
| 106 | #define U300_SYSCON_CERR_AHB_CLK_EN (0x0002) | |
| 107 | #define U300_SYSCON_CERR_AAIF_CLK_EN (0x0001) | |
| 108 | /* Single block clock enable 16bit (-/W) */ | |
| 109 | #define U300_SYSCON_SBCER (0x002c) | |
| 110 | #define U300_SYSCON_SBCER_PPM_CLK_EN (0x0009) | |
| 111 | #define U300_SYSCON_SBCER_ACC_TMR_CLK_EN (0x0008) | |
| 112 | #define U300_SYSCON_SBCER_APP_TMR_CLK_EN (0x0007) | |
| 113 | #define U300_SYSCON_SBCER_KEYPAD_CLK_EN (0x0006) | |
| 114 | #define U300_SYSCON_SBCER_GPIO_CLK_EN (0x0004) | |
| 115 | #define U300_SYSCON_SBCER_EH_CLK_EN (0x0003) | |
| 116 | #define U300_SYSCON_SBCER_BTR_CLK_EN (0x0002) | |
| 117 | #define U300_SYSCON_SBCER_UART_CLK_EN (0x0001) | |
| 118 | #define U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN (0x0000) | |
| 119 | #define U300_SYSCON_SBCER_UART1_CLK_EN (0x0019) | |
| 120 | #define U300_SYSCON_SBCER_I2S1_CORE_CLK_EN (0x0018) | |
| 121 | #define U300_SYSCON_SBCER_I2S0_CORE_CLK_EN (0x0017) | |
| 122 | #define U300_SYSCON_SBCER_SPI_CLK_EN (0x0016) | |
| 123 | #define U300_SYSCON_SBCER_MMC_CLK_EN (0x0015) | |
| 124 | #define U300_SYSCON_SBCER_I2S1_CLK_EN (0x0014) | |
| 125 | #define U300_SYSCON_SBCER_I2S0_CLK_EN (0x0013) | |
| 126 | #define U300_SYSCON_SBCER_I2C1_CLK_EN (0x0012) | |
| 127 | #define U300_SYSCON_SBCER_I2C0_CLK_EN (0x0011) | |
| 128 | #define U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN (0x0010) | |
| 129 | #define U300_SYSCON_SBCER_CDS_CLK_EN (0x002D) | |
| 130 | #define U300_SYSCON_SBCER_ISP_CLK_EN (0x002C) | |
| 131 | #define U300_SYSCON_SBCER_MSPRO_CLK_EN (0x002B) | |
| 132 | #define U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN (0x002A) | |
| 133 | #define U300_SYSCON_SBCER_SEMI_CLK_EN (0x0029) | |
| 134 | #define U300_SYSCON_SBCER_XGAM_CLK_EN (0x0028) | |
| 135 | #define U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN (0x0027) | |
| 136 | #define U300_SYSCON_SBCER_NANDIF_CLK_EN (0x0026) | |
| 137 | #define U300_SYSCON_SBCER_EMIF_CLK_EN (0x0025) | |
| 138 | #define U300_SYSCON_SBCER_DMAC_CLK_EN (0x0024) | |
| 139 | #define U300_SYSCON_SBCER_CPU_CLK_EN (0x0023) | |
| 140 | #define U300_SYSCON_SBCER_APEX_CLK_EN (0x0022) | |
| 141 | #define U300_SYSCON_SBCER_AHB_CLK_EN (0x0021) | |
| 142 | #define U300_SYSCON_SBCER_AAIF_CLK_EN (0x0020) | |
| 143 | /* Single block clock disable 16bit (-/W) */ | |
| 144 | #define U300_SYSCON_SBCDR (0x0030) | |
| 145 | /* Same values as above for SBCER */ | |
| 146 | /* Clock force SLOW peripherals 16bit (R/W) */ | |
| 147 | #define U300_SYSCON_CFSR (0x003c) | |
| 148 | #define U300_SYSCON_CFSR_PPM_CLK_FORCE_EN (0x0200) | |
| 149 | #define U300_SYSCON_CFSR_ACC_TMR_CLK_FORCE_EN (0x0100) | |
| 150 | #define U300_SYSCON_CFSR_APP_TMR_CLK_FORCE_EN (0x0080) | |
| 151 | #define U300_SYSCON_CFSR_KEYPAD_CLK_FORCE_EN (0x0020) | |
| 152 | #define U300_SYSCON_CFSR_GPIO_CLK_FORCE_EN (0x0010) | |
| 153 | #define U300_SYSCON_CFSR_EH_CLK_FORCE_EN (0x0008) | |
| 154 | #define U300_SYSCON_CFSR_BTR_CLK_FORCE_EN (0x0004) | |
| 155 | #define U300_SYSCON_CFSR_UART_CLK_FORCE_EN (0x0002) | |
| 156 | #define U300_SYSCON_CFSR_SLOW_BRIDGE_CLK_FORCE_EN (0x0001) | |
| 157 | /* Clock force FAST peripherals 16bit (R/W) */ | |
| 158 | #define U300_SYSCON_CFFR (0x40) | |
| 159 | /* Values not defined. Define if you want to use them. */ | |
| 160 | /* Clock force the rest of the peripherals 16bit (R/W) */ | |
| 161 | #define U300_SYSCON_CFRR (0x44) | |
| 162 | #define U300_SYSCON_CFRR_CDS_CLK_FORCE_EN (0x2000) | |
| 163 | #define U300_SYSCON_CFRR_ISP_CLK_FORCE_EN (0x1000) | |
| 164 | #define U300_SYSCON_CFRR_MSPRO_CLK_FORCE_EN (0x0800) | |
| 165 | #define U300_SYSCON_CFRR_AHB_SUBSYS_BRIDGE_CLK_FORCE_EN (0x0400) | |
| 166 | #define U300_SYSCON_CFRR_SEMI_CLK_FORCE_EN (0x0200) | |
| 167 | #define U300_SYSCON_CFRR_XGAM_CLK_FORCE_EN (0x0100) | |
| 168 | #define U300_SYSCON_CFRR_VIDEO_ENC_CLK_FORCE_EN (0x0080) | |
| 169 | #define U300_SYSCON_CFRR_NANDIF_CLK_FORCE_EN (0x0040) | |
| 170 | #define U300_SYSCON_CFRR_EMIF_CLK_FORCE_EN (0x0020) | |
| 171 | #define U300_SYSCON_CFRR_DMAC_CLK_FORCE_EN (0x0010) | |
| 172 | #define U300_SYSCON_CFRR_CPU_CLK_FORCE_EN (0x0008) | |
| 173 | #define U300_SYSCON_CFRR_APEX_CLK_FORCE_EN (0x0004) | |
| 174 | #define U300_SYSCON_CFRR_AHB_CLK_FORCE_EN (0x0002) | |
| 175 | #define U300_SYSCON_CFRR_AAIF_CLK_FORCE_EN (0x0001) | |
| 176 | /* PLL208 Frequency Control 16bit (R/W) */ | |
| 177 | #define U300_SYSCON_PFCR (0x48) | |
| 178 | #define U300_SYSCON_PFCR_DPLL_MULT_NUM (0x000F) | |
| 179 | /* Power Management Control 16bit (R/W) */ | |
| 180 | #define U300_SYSCON_PMCR (0x50) | |
| 181 | #define U300_SYSCON_PMCR_DCON_ENABLE (0x0002) | |
| 182 | #define U300_SYSCON_PMCR_PWR_MGNT_ENABLE (0x0001) | |
| 183 | /* Reset Out 16bit (R/W) */ | |
| 184 | #define U300_SYSCON_RCR (0x6c) | |
| 185 | #define U300_SYSCON_RCR_RESOUT0_RST_N_DISABLE (0x0001) | |
| 186 | /* EMIF Slew Rate Control 16bit (R/W) */ | |
| 187 | #define U300_SYSCON_SRCLR (0x70) | |
| 188 | #define U300_SYSCON_SRCLR_MASK (0x03FF) | |
| 189 | #define U300_SYSCON_SRCLR_VALUE (0x03FF) | |
| 190 | #define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_B (0x0200) | |
| 191 | #define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_A (0x0100) | |
| 192 | #define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_B (0x0080) | |
| 193 | #define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_A (0x0040) | |
| 194 | #define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_B (0x0020) | |
| 195 | #define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_A (0x0010) | |
| 196 | #define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_B (0x0008) | |
| 197 | #define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_A (0x0004) | |
| 198 | #define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_B (0x0002) | |
| 199 | #define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_A (0x0001) | |
| 200 | /* EMIF Clock Control Register 16bit (R/W) */ | |
| 201 | #define U300_SYSCON_ECCR (0x0078) | |
| 202 | #define U300_SYSCON_ECCR_MASK (0x000F) | |
| 203 | #define U300_SYSCON_ECCR_EMIF_1_STATIC_CLK_EN_N_DISABLE (0x0008) | |
| 204 | #define U300_SYSCON_ECCR_EMIF_1_RET_OUT_CLK_EN_N_DISABLE (0x0004) | |
| 205 | #define U300_SYSCON_ECCR_EMIF_MEMCLK_RET_EN_N_DISABLE (0x0002) | |
| 206 | #define U300_SYSCON_ECCR_EMIF_SDRCLK_RET_EN_N_DISABLE (0x0001) | |
| 207 | /* MMC/MSPRO frequency divider register 0 16bit (R/W) */ | |
| 208 | #define U300_SYSCON_MMF0R (0x90) | |
| 209 | #define U300_SYSCON_MMF0R_MASK (0x00FF) | |
| 210 | #define U300_SYSCON_MMF0R_FREQ_0_HIGH_MASK (0x00F0) | |
| 211 | #define U300_SYSCON_MMF0R_FREQ_0_LOW_MASK (0x000F) | |
| 212 | /* MMC/MSPRO frequency divider register 1 16bit (R/W) */ | |
| 213 | #define U300_SYSCON_MMF1R (0x94) | |
| 214 | #define U300_SYSCON_MMF1R_MASK (0x00FF) | |
| 215 | #define U300_SYSCON_MMF1R_FREQ_1_HIGH_MASK (0x00F0) | |
| 216 | #define U300_SYSCON_MMF1R_FREQ_1_LOW_MASK (0x000F) | |
| 217 | /* Clock control for the MMC and MSPRO blocks 16bit (R/W) */ | |
| 218 | #define U300_SYSCON_MMCR (0x9C) | |
| 219 | #define U300_SYSCON_MMCR_MASK (0x0003) | |
| 220 | #define U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE (0x0002) | |
| 221 | #define U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE (0x0001) | |
| 222 | /* SYS_0_CLK_CONTROL first clock control 16bit (R/W) */ | |
| 223 | #define U300_SYSCON_S0CCR (0x120) | |
| 224 | #define U300_SYSCON_S0CCR_FIELD_MASK (0x43FF) | |
| 225 | #define U300_SYSCON_S0CCR_CLOCK_REQ (0x4000) | |
| 226 | #define U300_SYSCON_S0CCR_CLOCK_REQ_MONITOR (0x2000) | |
| 227 | #define U300_SYSCON_S0CCR_CLOCK_INV (0x0200) | |
| 228 | #define U300_SYSCON_S0CCR_CLOCK_FREQ_MASK (0x01E0) | |
| 229 | #define U300_SYSCON_S0CCR_CLOCK_SELECT_MASK (0x001E) | |
| 230 | #define U300_SYSCON_S0CCR_CLOCK_ENABLE (0x0001) | |
| 231 | #define U300_SYSCON_S0CCR_SEL_MCLK (0x8<<1) | |
| 232 | #define U300_SYSCON_S0CCR_SEL_ACC_FSM_CLK (0xA<<1) | |
| 233 | #define U300_SYSCON_S0CCR_SEL_PLL60_48_CLK (0xC<<1) | |
| 234 | #define U300_SYSCON_S0CCR_SEL_PLL60_60_CLK (0xD<<1) | |
| 235 | #define U300_SYSCON_S0CCR_SEL_ACC_PLL208_CLK (0xE<<1) | |
| 236 | #define U300_SYSCON_S0CCR_SEL_APP_PLL13_CLK (0x0<<1) | |
| 237 | #define U300_SYSCON_S0CCR_SEL_APP_FSM_CLK (0x2<<1) | |
| 238 | #define U300_SYSCON_S0CCR_SEL_RTC_CLK (0x4<<1) | |
| 239 | #define U300_SYSCON_S0CCR_SEL_APP_PLL208_CLK (0x6<<1) | |
| 240 | /* SYS_1_CLK_CONTROL second clock control 16 bit (R/W) */ | |
| 241 | #define U300_SYSCON_S1CCR (0x124) | |
| 242 | #define U300_SYSCON_S1CCR_FIELD_MASK (0x43FF) | |
| 243 | #define U300_SYSCON_S1CCR_CLOCK_REQ (0x4000) | |
| 244 | #define U300_SYSCON_S1CCR_CLOCK_REQ_MONITOR (0x2000) | |
| 245 | #define U300_SYSCON_S1CCR_CLOCK_INV (0x0200) | |
| 246 | #define U300_SYSCON_S1CCR_CLOCK_FREQ_MASK (0x01E0) | |
| 247 | #define U300_SYSCON_S1CCR_CLOCK_SELECT_MASK (0x001E) | |
| 248 | #define U300_SYSCON_S1CCR_CLOCK_ENABLE (0x0001) | |
| 249 | #define U300_SYSCON_S1CCR_SEL_MCLK (0x8<<1) | |
| 250 | #define U300_SYSCON_S1CCR_SEL_ACC_FSM_CLK (0xA<<1) | |
| 251 | #define U300_SYSCON_S1CCR_SEL_PLL60_48_CLK (0xC<<1) | |
| 252 | #define U300_SYSCON_S1CCR_SEL_PLL60_60_CLK (0xD<<1) | |
| 253 | #define U300_SYSCON_S1CCR_SEL_ACC_PLL208_CLK (0xE<<1) | |
| 254 | #define U300_SYSCON_S1CCR_SEL_ACC_PLL13_CLK (0x0<<1) | |
| 255 | #define U300_SYSCON_S1CCR_SEL_APP_FSM_CLK (0x2<<1) | |
| 256 | #define U300_SYSCON_S1CCR_SEL_RTC_CLK (0x4<<1) | |
| 257 | #define U300_SYSCON_S1CCR_SEL_APP_PLL208_CLK (0x6<<1) | |
| 258 | /* SYS_2_CLK_CONTROL third clock contol 16 bit (R/W) */ | |
| 259 | #define U300_SYSCON_S2CCR (0x128) | |
| 260 | #define U300_SYSCON_S2CCR_FIELD_MASK (0xC3FF) | |
| 261 | #define U300_SYSCON_S2CCR_CLK_STEAL (0x8000) | |
| 262 | #define U300_SYSCON_S2CCR_CLOCK_REQ (0x4000) | |
| 263 | #define U300_SYSCON_S2CCR_CLOCK_REQ_MONITOR (0x2000) | |
| 264 | #define U300_SYSCON_S2CCR_CLOCK_INV (0x0200) | |
| 265 | #define U300_SYSCON_S2CCR_CLOCK_FREQ_MASK (0x01E0) | |
| 266 | #define U300_SYSCON_S2CCR_CLOCK_SELECT_MASK (0x001E) | |
| 267 | #define U300_SYSCON_S2CCR_CLOCK_ENABLE (0x0001) | |
| 268 | #define U300_SYSCON_S2CCR_SEL_MCLK (0x8<<1) | |
| 269 | #define U300_SYSCON_S2CCR_SEL_ACC_FSM_CLK (0xA<<1) | |
| 270 | #define U300_SYSCON_S2CCR_SEL_PLL60_48_CLK (0xC<<1) | |
| 271 | #define U300_SYSCON_S2CCR_SEL_PLL60_60_CLK (0xD<<1) | |
| 272 | #define U300_SYSCON_S2CCR_SEL_ACC_PLL208_CLK (0xE<<1) | |
| 273 | #define U300_SYSCON_S2CCR_SEL_ACC_PLL13_CLK (0x0<<1) | |
| 274 | #define U300_SYSCON_S2CCR_SEL_APP_FSM_CLK (0x2<<1) | |
| 275 | #define U300_SYSCON_S2CCR_SEL_RTC_CLK (0x4<<1) | |
| 276 | #define U300_SYSCON_S2CCR_SEL_APP_PLL208_CLK (0x6<<1) | |
| 277 | /* SC_PLL_IRQ_CONTROL 16bit (R/W) */ | |
| 278 | #define U300_SYSCON_PICR (0x0130) | |
| 279 | #define U300_SYSCON_PICR_MASK (0x00FF) | |
| 280 | #define U300_SYSCON_PICR_FORCE_PLL208_LOCK_LOW_ENABLE (0x0080) | |
| 281 | #define U300_SYSCON_PICR_FORCE_PLL208_LOCK_HIGH_ENABLE (0x0040) | |
| 282 | #define U300_SYSCON_PICR_FORCE_PLL13_LOCK_LOW_ENABLE (0x0020) | |
| 283 | #define U300_SYSCON_PICR_FORCE_PLL13_LOCK_HIGH_ENABLE (0x0010) | |
| 284 | #define U300_SYSCON_PICR_IRQMASK_PLL13_UNLOCK_ENABLE (0x0008) | |
| 285 | #define U300_SYSCON_PICR_IRQMASK_PLL13_LOCK_ENABLE (0x0004) | |
| 286 | #define U300_SYSCON_PICR_IRQMASK_PLL208_UNLOCK_ENABLE (0x0002) | |
| 287 | #define U300_SYSCON_PICR_IRQMASK_PLL208_LOCK_ENABLE (0x0001) | |
| 288 | /* SC_PLL_IRQ_STATUS 16 bit (R/-) */ | |
| 289 | #define U300_SYSCON_PISR (0x0134) | |
| 290 | #define U300_SYSCON_PISR_MASK (0x000F) | |
| 291 | #define U300_SYSCON_PISR_PLL13_UNLOCK_IND (0x0008) | |
| 292 | #define U300_SYSCON_PISR_PLL13_LOCK_IND (0x0004) | |
| 293 | #define U300_SYSCON_PISR_PLL208_UNLOCK_IND (0x0002) | |
| 294 | #define U300_SYSCON_PISR_PLL208_LOCK_IND (0x0001) | |
| 295 | /* SC_PLL_IRQ_CLEAR 16 bit (-/W) */ | |
| 296 | #define U300_SYSCON_PICLR (0x0138) | |
| 297 | #define U300_SYSCON_PICLR_MASK (0x000F) | |
| 298 | #define U300_SYSCON_PICLR_RWMASK (0x0000) | |
| 299 | #define U300_SYSCON_PICLR_PLL13_UNLOCK_SC (0x0008) | |
| 300 | #define U300_SYSCON_PICLR_PLL13_LOCK_SC (0x0004) | |
| 301 | #define U300_SYSCON_PICLR_PLL208_UNLOCK_SC (0x0002) | |
| 302 | #define U300_SYSCON_PICLR_PLL208_LOCK_SC (0x0001) | |
| 303 | /* Clock activity observability register 0 */ | |
| 304 | #define U300_SYSCON_C0OAR (0x140) | |
| 305 | #define U300_SYSCON_C0OAR_MASK (0xFFFF) | |
| 306 | #define U300_SYSCON_C0OAR_VALUE (0xFFFF) | |
| 307 | #define U300_SYSCON_C0OAR_BT_H_CLK (0x8000) | |
| 308 | #define U300_SYSCON_C0OAR_ASPB_P_CLK (0x4000) | |
| 309 | #define U300_SYSCON_C0OAR_APP_SEMI_H_CLK (0x2000) | |
| 310 | #define U300_SYSCON_C0OAR_APP_SEMI_CLK (0x1000) | |
| 311 | #define U300_SYSCON_C0OAR_APP_MMC_MSPRO_CLK (0x0800) | |
| 312 | #define U300_SYSCON_C0OAR_APP_I2S1_CLK (0x0400) | |
| 313 | #define U300_SYSCON_C0OAR_APP_I2S0_CLK (0x0200) | |
| 314 | #define U300_SYSCON_C0OAR_APP_CPU_CLK (0x0100) | |
| 315 | #define U300_SYSCON_C0OAR_APP_52_CLK (0x0080) | |
| 316 | #define U300_SYSCON_C0OAR_APP_208_CLK (0x0040) | |
| 317 | #define U300_SYSCON_C0OAR_APP_104_CLK (0x0020) | |
| 318 | #define U300_SYSCON_C0OAR_APEX_CLK (0x0010) | |
| 319 | #define U300_SYSCON_C0OAR_AHPB_M_H_CLK (0x0008) | |
| 320 | #define U300_SYSCON_C0OAR_AHB_CLK (0x0004) | |
| 321 | #define U300_SYSCON_C0OAR_AFPB_P_CLK (0x0002) | |
| 322 | #define U300_SYSCON_C0OAR_AAIF_CLK (0x0001) | |
| 323 | /* Clock activity observability register 1 */ | |
| 324 | #define U300_SYSCON_C1OAR (0x144) | |
| 325 | #define U300_SYSCON_C1OAR_MASK (0x3FFE) | |
| 326 | #define U300_SYSCON_C1OAR_VALUE (0x3FFE) | |
| 327 | #define U300_SYSCON_C1OAR_NFIF_F_CLK (0x2000) | |
| 328 | #define U300_SYSCON_C1OAR_MSPRO_CLK (0x1000) | |
| 329 | #define U300_SYSCON_C1OAR_MMC_P_CLK (0x0800) | |
| 330 | #define U300_SYSCON_C1OAR_MMC_CLK (0x0400) | |
| 331 | #define U300_SYSCON_C1OAR_KP_P_CLK (0x0200) | |
| 332 | #define U300_SYSCON_C1OAR_I2C1_P_CLK (0x0100) | |
| 333 | #define U300_SYSCON_C1OAR_I2C0_P_CLK (0x0080) | |
| 334 | #define U300_SYSCON_C1OAR_GPIO_CLK (0x0040) | |
| 335 | #define U300_SYSCON_C1OAR_EMIF_MPMC_CLK (0x0020) | |
| 336 | #define U300_SYSCON_C1OAR_EMIF_H_CLK (0x0010) | |
| 337 | #define U300_SYSCON_C1OAR_EVHIST_CLK (0x0008) | |
| 338 | #define U300_SYSCON_C1OAR_PPM_CLK (0x0004) | |
| 339 | #define U300_SYSCON_C1OAR_DMA_CLK (0x0002) | |
| 340 | /* Clock activity observability register 2 */ | |
| 341 | #define U300_SYSCON_C2OAR (0x148) | |
| 342 | #define U300_SYSCON_C2OAR_MASK (0x0FFF) | |
| 343 | #define U300_SYSCON_C2OAR_VALUE (0x0FFF) | |
| 344 | #define U300_SYSCON_C2OAR_XGAM_CDI_CLK (0x0800) | |
| 345 | #define U300_SYSCON_C2OAR_XGAM_CLK (0x0400) | |
| 346 | #define U300_SYSCON_C2OAR_VC_H_CLK (0x0200) | |
| 347 | #define U300_SYSCON_C2OAR_VC_CLK (0x0100) | |
| 348 | #define U300_SYSCON_C2OAR_UA_P_CLK (0x0080) | |
| 349 | #define U300_SYSCON_C2OAR_TMR1_CLK (0x0040) | |
| 350 | #define U300_SYSCON_C2OAR_TMR0_CLK (0x0020) | |
| 351 | #define U300_SYSCON_C2OAR_SPI_P_CLK (0x0010) | |
| 352 | #define U300_SYSCON_C2OAR_PCM_I2S1_CORE_CLK (0x0008) | |
| 353 | #define U300_SYSCON_C2OAR_PCM_I2S1_CLK (0x0004) | |
| 354 | #define U300_SYSCON_C2OAR_PCM_I2S0_CORE_CLK (0x0002) | |
| 355 | #define U300_SYSCON_C2OAR_PCM_I2S0_CLK (0x0001) | |
| 356 | ||
| 50667d63 LW |
357 | |
| 358 | /* | |
| 359 | * The clocking hierarchy currently looks like this. | |
| 360 | * NOTE: the idea is NOT to show how the clocks are routed on the chip! | |
| 361 | * The ideas is to show dependencies, so a clock higher up in the | |
| 362 | * hierarchy has to be on in order for another clock to be on. Now, | |
| 363 | * both CPU and DMA can actually be on top of the hierarchy, and that | |
| 364 | * is not modeled currently. Instead we have the backbone AMBA bus on | |
| 365 | * top. This bus cannot be programmed in any way but conceptually it | |
| 366 | * needs to be active for the bridges and devices to transport data. | |
| 367 | * | |
| 368 | * Please be aware that a few clocks are hw controlled, which mean that | |
| 369 | * the hw itself can turn on/off or change the rate of the clock when | |
| 370 | * needed! | |
| 371 | * | |
| 372 | * AMBA bus | |
| 373 | * | | |
| 374 | * +- CPU | |
| 375 | * +- FSMC NANDIF NAND Flash interface | |
| 376 | * +- SEMI Shared Memory interface | |
| 377 | * +- ISP Image Signal Processor (U335 only) | |
| 378 | * +- CDS (U335 only) | |
| 379 | * +- DMA Direct Memory Access Controller | |
| 380 | * +- AAIF APP/ACC Inteface (Mobile Scalable Link, MSL) | |
| 381 | * +- APEX | |
| 382 | * +- VIDEO_ENC AVE2/3 Video Encoder | |
| 383 | * +- XGAM Graphics Accelerator Controller | |
| 384 | * +- AHB | |
| 385 | * | | |
| 386 | * +- ahb:0 AHB Bridge | |
| 387 | * | | | |
| 388 | * | +- ahb:1 INTCON Interrupt controller | |
| 389 | * | +- ahb:3 MSPRO Memory Stick Pro controller | |
| 390 | * | +- ahb:4 EMIF External Memory interface | |
| 391 | * | | |
| 392 | * +- fast:0 FAST bridge | |
| 393 | * | | | |
| 394 | * | +- fast:1 MMCSD MMC/SD card reader controller | |
| 395 | * | +- fast:2 I2S0 PCM I2S channel 0 controller | |
| 396 | * | +- fast:3 I2S1 PCM I2S channel 1 controller | |
| 397 | * | +- fast:4 I2C0 I2C channel 0 controller | |
| 398 | * | +- fast:5 I2C1 I2C channel 1 controller | |
| 399 | * | +- fast:6 SPI SPI controller | |
| 400 | * | +- fast:7 UART1 Secondary UART (U335 only) | |
| 401 | * | | |
| 402 | * +- slow:0 SLOW bridge | |
| 403 | * | | |
| 404 | * +- slow:1 SYSCON (not possible to control) | |
| 405 | * +- slow:2 WDOG Watchdog | |
| 406 | * +- slow:3 UART0 primary UART | |
| 407 | * +- slow:4 TIMER_APP Application timer - used in Linux | |
| 408 | * +- slow:5 KEYPAD controller | |
| 409 | * +- slow:6 GPIO controller | |
| 410 | * +- slow:7 RTC controller | |
| 411 | * +- slow:8 BT Bus Tracer (not used currently) | |
| 412 | * +- slow:9 EH Event Handler (not used currently) | |
| 413 | * +- slow:a TIMER_ACC Access style timer (not used currently) | |
| 414 | * +- slow:b PPM (U335 only, what is that?) | |
| 415 | */ | |
| 416 | ||
| 417 | /* Global syscon virtual base */ | |
| 418 | static void __iomem *syscon_vbase; | |
| 419 | ||
| 420 | /** | |
| 421 | * struct clk_syscon - U300 syscon clock | |
| 422 | * @hw: corresponding clock hardware entry | |
| 423 | * @hw_ctrld: whether this clock is hardware controlled (for refcount etc) | |
| 424 | * and does not need any magic pokes to be enabled/disabled | |
| 425 | * @reset: state holder, whether this block's reset line is asserted or not | |
| 426 | * @res_reg: reset line enable/disable flag register | |
| 427 | * @res_bit: bit for resetting or taking this consumer out of reset | |
| 428 | * @en_reg: clock line enable/disable flag register | |
| 429 | * @en_bit: bit for enabling/disabling this consumer clock line | |
| 430 | * @clk_val: magic value to poke in the register to enable/disable | |
| 431 | * this one clock | |
| 432 | */ | |
| 433 | struct clk_syscon { | |
| 434 | struct clk_hw hw; | |
| 435 | bool hw_ctrld; | |
| 436 | bool reset; | |
| 437 | void __iomem *res_reg; | |
| 438 | u8 res_bit; | |
| 439 | void __iomem *en_reg; | |
| 440 | u8 en_bit; | |
| 441 | u16 clk_val; | |
| 442 | }; | |
| 443 | ||
| 444 | #define to_syscon(_hw) container_of(_hw, struct clk_syscon, hw) | |
| 445 | ||
| 446 | static DEFINE_SPINLOCK(syscon_resetreg_lock); | |
| 447 | ||
| 448 | /* | |
| 449 | * Reset control functions. We remember if a block has been | |
| 450 | * taken out of reset and don't remove the reset assertion again | |
| 451 | * and vice versa. Currently we only remove resets so the | |
| 452 | * enablement function is defined out. | |
| 453 | */ | |
| 454 | static void syscon_block_reset_enable(struct clk_syscon *sclk) | |
| 455 | { | |
| 456 | unsigned long iflags; | |
| 457 | u16 val; | |
| 458 | ||
| 459 | /* Not all blocks support resetting */ | |
| 460 | if (!sclk->res_reg) | |
| 461 | return; | |
| 462 | spin_lock_irqsave(&syscon_resetreg_lock, iflags); | |
| 463 | val = readw(sclk->res_reg); | |
| 464 | val |= BIT(sclk->res_bit); | |
| 465 | writew(val, sclk->res_reg); | |
| 466 | spin_unlock_irqrestore(&syscon_resetreg_lock, iflags); | |
| 467 | sclk->reset = true; | |
| 468 | } | |
| 469 | ||
| 470 | static void syscon_block_reset_disable(struct clk_syscon *sclk) | |
| 471 | { | |
| 472 | unsigned long iflags; | |
| 473 | u16 val; | |
| 474 | ||
| 475 | /* Not all blocks support resetting */ | |
| 476 | if (!sclk->res_reg) | |
| 477 | return; | |
| 478 | spin_lock_irqsave(&syscon_resetreg_lock, iflags); | |
| 479 | val = readw(sclk->res_reg); | |
| 480 | val &= ~BIT(sclk->res_bit); | |
| 481 | writew(val, sclk->res_reg); | |
| 482 | spin_unlock_irqrestore(&syscon_resetreg_lock, iflags); | |
| 483 | sclk->reset = false; | |
| 484 | } | |
| 485 | ||
| 486 | static int syscon_clk_prepare(struct clk_hw *hw) | |
| 487 | { | |
| 488 | struct clk_syscon *sclk = to_syscon(hw); | |
| 489 | ||
| 490 | /* If the block is in reset, bring it out */ | |
| 491 | if (sclk->reset) | |
| 492 | syscon_block_reset_disable(sclk); | |
| 493 | return 0; | |
| 494 | } | |
| 495 | ||
| 496 | static void syscon_clk_unprepare(struct clk_hw *hw) | |
| 497 | { | |
| 498 | struct clk_syscon *sclk = to_syscon(hw); | |
| 499 | ||
| 500 | /* Please don't force the console into reset */ | |
| 501 | if (sclk->clk_val == U300_SYSCON_SBCER_UART_CLK_EN) | |
| 502 | return; | |
| 503 | /* When unpreparing, force block into reset */ | |
| 504 | if (!sclk->reset) | |
| 505 | syscon_block_reset_enable(sclk); | |
| 506 | } | |
| 507 | ||
| 508 | static int syscon_clk_enable(struct clk_hw *hw) | |
| 509 | { | |
| 510 | struct clk_syscon *sclk = to_syscon(hw); | |
| 511 | ||
| 512 | /* Don't touch the hardware controlled clocks */ | |
| 513 | if (sclk->hw_ctrld) | |
| 514 | return 0; | |
| 515 | /* These cannot be controlled */ | |
| 516 | if (sclk->clk_val == 0xFFFFU) | |
| 517 | return 0; | |
| 518 | ||
| 519 | writew(sclk->clk_val, syscon_vbase + U300_SYSCON_SBCER); | |
| 520 | return 0; | |
| 521 | } | |
| 522 | ||
| 523 | static void syscon_clk_disable(struct clk_hw *hw) | |
| 524 | { | |
| 525 | struct clk_syscon *sclk = to_syscon(hw); | |
| 526 | ||
| 527 | /* Don't touch the hardware controlled clocks */ | |
| 528 | if (sclk->hw_ctrld) | |
| 529 | return; | |
| 530 | if (sclk->clk_val == 0xFFFFU) | |
| 531 | return; | |
| 532 | /* Please don't disable the console port */ | |
| 533 | if (sclk->clk_val == U300_SYSCON_SBCER_UART_CLK_EN) | |
| 534 | return; | |
| 535 | ||
| 536 | writew(sclk->clk_val, syscon_vbase + U300_SYSCON_SBCDR); | |
| 537 | } | |
| 538 | ||
| 539 | static int syscon_clk_is_enabled(struct clk_hw *hw) | |
| 540 | { | |
| 541 | struct clk_syscon *sclk = to_syscon(hw); | |
| 542 | u16 val; | |
| 543 | ||
| 544 | /* If no enable register defined, it's always-on */ | |
| 545 | if (!sclk->en_reg) | |
| 546 | return 1; | |
| 547 | ||
| 548 | val = readw(sclk->en_reg); | |
| 549 | val &= BIT(sclk->en_bit); | |
| 550 | ||
| 551 | return val ? 1 : 0; | |
| 552 | } | |
| 553 | ||
| 554 | static u16 syscon_get_perf(void) | |
| 555 | { | |
| 556 | u16 val; | |
| 557 | ||
| 558 | val = readw(syscon_vbase + U300_SYSCON_CCR); | |
| 559 | val &= U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK; | |
| 560 | return val; | |
| 561 | } | |
| 562 | ||
| 563 | static unsigned long | |
| 564 | syscon_clk_recalc_rate(struct clk_hw *hw, | |
| 565 | unsigned long parent_rate) | |
| 566 | { | |
| 567 | struct clk_syscon *sclk = to_syscon(hw); | |
| 568 | u16 perf = syscon_get_perf(); | |
| 569 | ||
| 570 | switch(sclk->clk_val) { | |
| 571 | case U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN: | |
| 572 | case U300_SYSCON_SBCER_I2C0_CLK_EN: | |
| 573 | case U300_SYSCON_SBCER_I2C1_CLK_EN: | |
| 574 | case U300_SYSCON_SBCER_MMC_CLK_EN: | |
| 575 | case U300_SYSCON_SBCER_SPI_CLK_EN: | |
| 576 | /* The FAST clocks have one progression */ | |
| 577 | switch(perf) { | |
| 578 | case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: | |
| 579 | case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: | |
| 580 | return 13000000; | |
| 581 | default: | |
| 582 | return parent_rate; /* 26 MHz */ | |
| 583 | } | |
| 584 | case U300_SYSCON_SBCER_DMAC_CLK_EN: | |
| 585 | case U300_SYSCON_SBCER_NANDIF_CLK_EN: | |
| 586 | case U300_SYSCON_SBCER_XGAM_CLK_EN: | |
| 587 | /* AMBA interconnect peripherals */ | |
| 588 | switch(perf) { | |
| 589 | case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: | |
| 590 | case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: | |
| 591 | return 6500000; | |
| 592 | case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: | |
| 593 | return 26000000; | |
| 594 | default: | |
| 595 | return parent_rate; /* 52 MHz */ | |
| 596 | } | |
| 597 | case U300_SYSCON_SBCER_SEMI_CLK_EN: | |
| 598 | case U300_SYSCON_SBCER_EMIF_CLK_EN: | |
| 599 | /* EMIF speeds */ | |
| 600 | switch(perf) { | |
| 601 | case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: | |
| 602 | case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: | |
| 603 | return 13000000; | |
| 604 | case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: | |
| 605 | return 52000000; | |
| 606 | default: | |
| 607 | return 104000000; | |
| 608 | } | |
| 609 | case U300_SYSCON_SBCER_CPU_CLK_EN: | |
| 610 | /* And the fast CPU clock */ | |
| 611 | switch(perf) { | |
| 612 | case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: | |
| 613 | case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: | |
| 614 | return 13000000; | |
| 615 | case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: | |
| 616 | return 52000000; | |
| 617 | case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH: | |
| 618 | return 104000000; | |
| 619 | default: | |
| 620 | return parent_rate; /* 208 MHz */ | |
| 621 | } | |
| 622 | default: | |
| 623 | /* | |
| 624 | * The SLOW clocks and default just inherit the rate of | |
| 625 | * their parent (typically PLL13 13 MHz). | |
| 626 | */ | |
| 627 | return parent_rate; | |
| 628 | } | |
| 629 | } | |
| 630 | ||
| 631 | static long | |
| 632 | syscon_clk_round_rate(struct clk_hw *hw, unsigned long rate, | |
| 633 | unsigned long *prate) | |
| 634 | { | |
| 635 | struct clk_syscon *sclk = to_syscon(hw); | |
| 636 | ||
| 637 | if (sclk->clk_val != U300_SYSCON_SBCER_CPU_CLK_EN) | |
| 638 | return *prate; | |
| 639 | /* We really only support setting the rate of the CPU clock */ | |
| 640 | if (rate <= 13000000) | |
| 641 | return 13000000; | |
| 642 | if (rate <= 52000000) | |
| 643 | return 52000000; | |
| 644 | if (rate <= 104000000) | |
| 645 | return 104000000; | |
| 646 | return 208000000; | |
| 647 | } | |
| 648 | ||
| 649 | static int syscon_clk_set_rate(struct clk_hw *hw, unsigned long rate, | |
| 650 | unsigned long parent_rate) | |
| 651 | { | |
| 652 | struct clk_syscon *sclk = to_syscon(hw); | |
| 653 | u16 val; | |
| 654 | ||
| 655 | /* We only support setting the rate of the CPU clock */ | |
| 656 | if (sclk->clk_val != U300_SYSCON_SBCER_CPU_CLK_EN) | |
| 657 | return -EINVAL; | |
| 658 | switch (rate) { | |
| 659 | case 13000000: | |
| 660 | val = U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER; | |
| 661 | break; | |
| 662 | case 52000000: | |
| 663 | val = U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE; | |
| 664 | break; | |
| 665 | case 104000000: | |
| 666 | val = U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH; | |
| 667 | break; | |
| 668 | case 208000000: | |
| 669 | val = U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST; | |
| 670 | break; | |
| 671 | default: | |
| 672 | return -EINVAL; | |
| 673 | } | |
| 674 | val |= readw(syscon_vbase + U300_SYSCON_CCR) & | |
| 675 | ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK ; | |
| 676 | writew(val, syscon_vbase + U300_SYSCON_CCR); | |
| 677 | return 0; | |
| 678 | } | |
| 679 | ||
| 680 | static const struct clk_ops syscon_clk_ops = { | |
| 681 | .prepare = syscon_clk_prepare, | |
| 682 | .unprepare = syscon_clk_unprepare, | |
| 683 | .enable = syscon_clk_enable, | |
| 684 | .disable = syscon_clk_disable, | |
| 685 | .is_enabled = syscon_clk_is_enabled, | |
| 686 | .recalc_rate = syscon_clk_recalc_rate, | |
| 687 | .round_rate = syscon_clk_round_rate, | |
| 688 | .set_rate = syscon_clk_set_rate, | |
| 689 | }; | |
| 690 | ||
| 691 | static struct clk * __init | |
| 692 | syscon_clk_register(struct device *dev, const char *name, | |
| 693 | const char *parent_name, unsigned long flags, | |
| 694 | bool hw_ctrld, | |
| 695 | void __iomem *res_reg, u8 res_bit, | |
| 696 | void __iomem *en_reg, u8 en_bit, | |
| 697 | u16 clk_val) | |
| 698 | { | |
| 699 | struct clk *clk; | |
| 700 | struct clk_syscon *sclk; | |
| 701 | struct clk_init_data init; | |
| 702 | ||
| 703 | sclk = kzalloc(sizeof(struct clk_syscon), GFP_KERNEL); | |
| 704 | if (!sclk) { | |
| 705 | pr_err("could not allocate syscon clock %s\n", | |
| 706 | name); | |
| 707 | return ERR_PTR(-ENOMEM); | |
| 708 | } | |
| 709 | init.name = name; | |
| 710 | init.ops = &syscon_clk_ops; | |
| 711 | init.flags = flags; | |
| 712 | init.parent_names = (parent_name ? &parent_name : NULL); | |
| 713 | init.num_parents = (parent_name ? 1 : 0); | |
| 714 | sclk->hw.init = &init; | |
| 715 | sclk->hw_ctrld = hw_ctrld; | |
| 716 | /* Assume the block is in reset at registration */ | |
| 717 | sclk->reset = true; | |
| 718 | sclk->res_reg = res_reg; | |
| 719 | sclk->res_bit = res_bit; | |
| 720 | sclk->en_reg = en_reg; | |
| 721 | sclk->en_bit = en_bit; | |
| 722 | sclk->clk_val = clk_val; | |
| 723 | ||
| 724 | clk = clk_register(dev, &sclk->hw); | |
| 725 | if (IS_ERR(clk)) | |
| 726 | kfree(sclk); | |
| 727 | ||
| 728 | return clk; | |
| 729 | } | |
| 730 | ||
| bba5f2cc LW |
731 | #define U300_CLK_TYPE_SLOW 0 |
| 732 | #define U300_CLK_TYPE_FAST 1 | |
| 733 | #define U300_CLK_TYPE_REST 2 | |
| 734 | ||
| 735 | /** | |
| 736 | * struct u300_clock - defines the bits and pieces for a certain clock | |
| 737 | * @type: the clock type, slow fast or rest | |
| 738 | * @id: the bit in the slow/fast/rest register for this clock | |
| 739 | * @hw_ctrld: whether the clock is hardware controlled | |
| 740 | * @clk_val: a value to poke in the one-write enable/disable registers | |
| 741 | */ | |
| 742 | struct u300_clock { | |
| 743 | u8 type; | |
| 744 | u8 id; | |
| 745 | bool hw_ctrld; | |
| 746 | u16 clk_val; | |
| 747 | }; | |
| 748 | ||
| edead9f8 | 749 | static struct u300_clock const u300_clk_lookup[] __initconst = { |
| bba5f2cc LW |
750 | { |
| 751 | .type = U300_CLK_TYPE_REST, | |
| 752 | .id = 3, | |
| 753 | .hw_ctrld = true, | |
| 754 | .clk_val = U300_SYSCON_SBCER_CPU_CLK_EN, | |
| 755 | }, | |
| 756 | { | |
| 757 | .type = U300_CLK_TYPE_REST, | |
| 758 | .id = 4, | |
| 759 | .hw_ctrld = true, | |
| 760 | .clk_val = U300_SYSCON_SBCER_DMAC_CLK_EN, | |
| 761 | }, | |
| 762 | { | |
| 763 | .type = U300_CLK_TYPE_REST, | |
| 764 | .id = 5, | |
| 765 | .hw_ctrld = false, | |
| 766 | .clk_val = U300_SYSCON_SBCER_EMIF_CLK_EN, | |
| 767 | }, | |
| 768 | { | |
| 769 | .type = U300_CLK_TYPE_REST, | |
| 770 | .id = 6, | |
| 771 | .hw_ctrld = false, | |
| 772 | .clk_val = U300_SYSCON_SBCER_NANDIF_CLK_EN, | |
| 773 | }, | |
| 774 | { | |
| 775 | .type = U300_CLK_TYPE_REST, | |
| 776 | .id = 8, | |
| 777 | .hw_ctrld = true, | |
| 778 | .clk_val = U300_SYSCON_SBCER_XGAM_CLK_EN, | |
| 779 | }, | |
| 780 | { | |
| 781 | .type = U300_CLK_TYPE_REST, | |
| 782 | .id = 9, | |
| 783 | .hw_ctrld = false, | |
| 784 | .clk_val = U300_SYSCON_SBCER_SEMI_CLK_EN, | |
| 785 | }, | |
| 786 | { | |
| 787 | .type = U300_CLK_TYPE_REST, | |
| 788 | .id = 10, | |
| 789 | .hw_ctrld = true, | |
| 790 | .clk_val = U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN, | |
| 791 | }, | |
| 792 | { | |
| 793 | .type = U300_CLK_TYPE_REST, | |
| 794 | .id = 12, | |
| 795 | .hw_ctrld = false, | |
| 796 | /* INTCON: cannot be enabled, just taken out of reset */ | |
| 797 | .clk_val = 0xFFFFU, | |
| 798 | }, | |
| 799 | { | |
| 800 | .type = U300_CLK_TYPE_FAST, | |
| 801 | .id = 0, | |
| 802 | .hw_ctrld = true, | |
| 803 | .clk_val = U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN, | |
| 804 | }, | |
| 805 | { | |
| 806 | .type = U300_CLK_TYPE_FAST, | |
| 807 | .id = 1, | |
| 808 | .hw_ctrld = false, | |
| 809 | .clk_val = U300_SYSCON_SBCER_I2C0_CLK_EN, | |
| 810 | }, | |
| 811 | { | |
| 812 | .type = U300_CLK_TYPE_FAST, | |
| 813 | .id = 2, | |
| 814 | .hw_ctrld = false, | |
| 815 | .clk_val = U300_SYSCON_SBCER_I2C1_CLK_EN, | |
| 816 | }, | |
| 817 | { | |
| 818 | .type = U300_CLK_TYPE_FAST, | |
| 819 | .id = 5, | |
| 820 | .hw_ctrld = false, | |
| 821 | .clk_val = U300_SYSCON_SBCER_MMC_CLK_EN, | |
| 822 | }, | |
| 823 | { | |
| 824 | .type = U300_CLK_TYPE_FAST, | |
| 825 | .id = 6, | |
| 826 | .hw_ctrld = false, | |
| 827 | .clk_val = U300_SYSCON_SBCER_SPI_CLK_EN, | |
| 828 | }, | |
| 829 | { | |
| 830 | .type = U300_CLK_TYPE_SLOW, | |
| 831 | .id = 0, | |
| 832 | .hw_ctrld = true, | |
| 833 | .clk_val = U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN, | |
| 834 | }, | |
| 835 | { | |
| 836 | .type = U300_CLK_TYPE_SLOW, | |
| 837 | .id = 1, | |
| 838 | .hw_ctrld = false, | |
| 839 | .clk_val = U300_SYSCON_SBCER_UART_CLK_EN, | |
| 840 | }, | |
| 841 | { | |
| 842 | .type = U300_CLK_TYPE_SLOW, | |
| 843 | .id = 4, | |
| 844 | .hw_ctrld = false, | |
| 845 | .clk_val = U300_SYSCON_SBCER_GPIO_CLK_EN, | |
| 846 | }, | |
| 847 | { | |
| 848 | .type = U300_CLK_TYPE_SLOW, | |
| 849 | .id = 6, | |
| 850 | .hw_ctrld = true, | |
| 851 | /* No clock enable register bit */ | |
| 852 | .clk_val = 0xFFFFU, | |
| 853 | }, | |
| 854 | { | |
| 855 | .type = U300_CLK_TYPE_SLOW, | |
| 856 | .id = 7, | |
| 857 | .hw_ctrld = false, | |
| 858 | .clk_val = U300_SYSCON_SBCER_APP_TMR_CLK_EN, | |
| 859 | }, | |
| 860 | { | |
| 861 | .type = U300_CLK_TYPE_SLOW, | |
| 862 | .id = 8, | |
| 863 | .hw_ctrld = false, | |
| 864 | .clk_val = U300_SYSCON_SBCER_ACC_TMR_CLK_EN, | |
| 865 | }, | |
| 866 | }; | |
| 867 | ||
| 868 | static void __init of_u300_syscon_clk_init(struct device_node *np) | |
| 869 | { | |
| 870 | struct clk *clk = ERR_PTR(-EINVAL); | |
| 871 | const char *clk_name = np->name; | |
| 872 | const char *parent_name; | |
| 873 | void __iomem *res_reg; | |
| 874 | void __iomem *en_reg; | |
| 875 | u32 clk_type; | |
| 876 | u32 clk_id; | |
| 877 | int i; | |
| 878 | ||
| 879 | if (of_property_read_u32(np, "clock-type", &clk_type)) { | |
| 880 | pr_err("%s: syscon clock \"%s\" missing clock-type property\n", | |
| 881 | __func__, clk_name); | |
| 882 | return; | |
| 883 | } | |
| 884 | if (of_property_read_u32(np, "clock-id", &clk_id)) { | |
| 885 | pr_err("%s: syscon clock \"%s\" missing clock-id property\n", | |
| 886 | __func__, clk_name); | |
| 887 | return; | |
| 888 | } | |
| 889 | parent_name = of_clk_get_parent_name(np, 0); | |
| 890 | ||
| 891 | switch (clk_type) { | |
| 892 | case U300_CLK_TYPE_SLOW: | |
| 893 | res_reg = syscon_vbase + U300_SYSCON_RSR; | |
| 894 | en_reg = syscon_vbase + U300_SYSCON_CESR; | |
| 895 | break; | |
| 896 | case U300_CLK_TYPE_FAST: | |
| 897 | res_reg = syscon_vbase + U300_SYSCON_RFR; | |
| 898 | en_reg = syscon_vbase + U300_SYSCON_CEFR; | |
| 899 | break; | |
| 900 | case U300_CLK_TYPE_REST: | |
| 901 | res_reg = syscon_vbase + U300_SYSCON_RRR; | |
| 902 | en_reg = syscon_vbase + U300_SYSCON_CERR; | |
| 903 | break; | |
| 904 | default: | |
| 905 | pr_err("unknown clock type %x specified\n", clk_type); | |
| 906 | return; | |
| 907 | } | |
| 908 | ||
| 909 | for (i = 0; i < ARRAY_SIZE(u300_clk_lookup); i++) { | |
| 910 | const struct u300_clock *u3clk = &u300_clk_lookup[i]; | |
| 911 | ||
| 912 | if (u3clk->type == clk_type && u3clk->id == clk_id) | |
| 913 | clk = syscon_clk_register(NULL, | |
| 914 | clk_name, parent_name, | |
| 915 | 0, u3clk->hw_ctrld, | |
| 916 | res_reg, u3clk->id, | |
| 917 | en_reg, u3clk->id, | |
| 918 | u3clk->clk_val); | |
| 919 | } | |
| 920 | ||
| 921 | if (!IS_ERR(clk)) { | |
| 922 | of_clk_add_provider(np, of_clk_src_simple_get, clk); | |
| 923 | ||
| 924 | /* | |
| 925 | * Some few system clocks - device tree does not | |
| 926 | * represent clocks without a corresponding device node. | |
| 927 | * for now we add these three clocks here. | |
| 928 | */ | |
| 929 | if (clk_type == U300_CLK_TYPE_REST && clk_id == 5) | |
| 930 | clk_register_clkdev(clk, NULL, "pl172"); | |
| 931 | if (clk_type == U300_CLK_TYPE_REST && clk_id == 9) | |
| 932 | clk_register_clkdev(clk, NULL, "semi"); | |
| 933 | if (clk_type == U300_CLK_TYPE_REST && clk_id == 12) | |
| 934 | clk_register_clkdev(clk, NULL, "intcon"); | |
| 935 | } | |
| 936 | } | |
| 937 | ||
| 50667d63 LW |
938 | /** |
| 939 | * struct clk_mclk - U300 MCLK clock (MMC/SD clock) | |
| 940 | * @hw: corresponding clock hardware entry | |
| 941 | * @is_mspro: if this is the memory stick clock rather than MMC/SD | |
| 942 | */ | |
| 943 | struct clk_mclk { | |
| 944 | struct clk_hw hw; | |
| 945 | bool is_mspro; | |
| 946 | }; | |
| 947 | ||
| 948 | #define to_mclk(_hw) container_of(_hw, struct clk_mclk, hw) | |
| 949 | ||
| 950 | static int mclk_clk_prepare(struct clk_hw *hw) | |
| 951 | { | |
| 952 | struct clk_mclk *mclk = to_mclk(hw); | |
| 953 | u16 val; | |
| 954 | ||
| 955 | /* The MMC and MSPRO clocks need some special set-up */ | |
| 956 | if (!mclk->is_mspro) { | |
| 957 | /* Set default MMC clock divisor to 18.9 MHz */ | |
| 958 | writew(0x0054U, syscon_vbase + U300_SYSCON_MMF0R); | |
| 959 | val = readw(syscon_vbase + U300_SYSCON_MMCR); | |
| 960 | /* Disable the MMC feedback clock */ | |
| 961 | val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE; | |
| 962 | /* Disable MSPRO frequency */ | |
| 963 | val &= ~U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE; | |
| 964 | writew(val, syscon_vbase + U300_SYSCON_MMCR); | |
| 965 | } else { | |
| 966 | val = readw(syscon_vbase + U300_SYSCON_MMCR); | |
| 967 | /* Disable the MMC feedback clock */ | |
| 968 | val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE; | |
| 969 | /* Enable MSPRO frequency */ | |
| 970 | val |= U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE; | |
| 971 | writew(val, syscon_vbase + U300_SYSCON_MMCR); | |
| 972 | } | |
| 973 | ||
| 974 | return 0; | |
| 975 | } | |
| 976 | ||
| 977 | static unsigned long | |
| 978 | mclk_clk_recalc_rate(struct clk_hw *hw, | |
| 979 | unsigned long parent_rate) | |
| 980 | { | |
| 981 | u16 perf = syscon_get_perf(); | |
| 982 | ||
| 983 | switch (perf) { | |
| 984 | case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: | |
| 985 | /* | |
| 986 | * Here, the 208 MHz PLL gets shut down and the always | |
| 987 | * on 13 MHz PLL used for RTC etc kicks into use | |
| 988 | * instead. | |
| 989 | */ | |
| 990 | return 13000000; | |
| 991 | case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: | |
| 992 | case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: | |
| 993 | case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH: | |
| 994 | case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST: | |
| 995 | { | |
| 996 | /* | |
| 997 | * This clock is under program control. The register is | |
| 998 | * divided in two nybbles, bit 7-4 gives cycles-1 to count | |
| 999 | * high, bit 3-0 gives cycles-1 to count low. Distribute | |
| 1000 | * these with no more than 1 cycle difference between | |
| 1001 | * low and high and add low and high to get the actual | |
| 1002 | * divisor. The base PLL is 208 MHz. Writing 0x00 will | |
| 1003 | * divide by 1 and 1 so the highest frequency possible | |
| 1004 | * is 104 MHz. | |
| 1005 | * | |
| 1006 | * e.g. 0x54 => | |
| 1007 | * f = 208 / ((5+1) + (4+1)) = 208 / 11 = 18.9 MHz | |
| 1008 | */ | |
| 1009 | u16 val = readw(syscon_vbase + U300_SYSCON_MMF0R) & | |
| 1010 | U300_SYSCON_MMF0R_MASK; | |
| 1011 | switch (val) { | |
| 1012 | case 0x0054: | |
| 1013 | return 18900000; | |
| 1014 | case 0x0044: | |
| 1015 | return 20800000; | |
| 1016 | case 0x0043: | |
| 1017 | return 23100000; | |
| 1018 | case 0x0033: | |
| 1019 | return 26000000; | |
| 1020 | case 0x0032: | |
| 1021 | return 29700000; | |
| 1022 | case 0x0022: | |
| 1023 | return 34700000; | |
| 1024 | case 0x0021: | |
| 1025 | return 41600000; | |
| 1026 | case 0x0011: | |
| 1027 | return 52000000; | |
| 1028 | case 0x0000: | |
| 1029 | return 104000000; | |
| 1030 | default: | |
| 1031 | break; | |
| 1032 | } | |
| 1033 | } | |
| 1034 | default: | |
| 1035 | break; | |
| 1036 | } | |
| 1037 | return parent_rate; | |
| 1038 | } | |
| 1039 | ||
| 1040 | static long | |
| 1041 | mclk_clk_round_rate(struct clk_hw *hw, unsigned long rate, | |
| 1042 | unsigned long *prate) | |
| 1043 | { | |
| 1044 | if (rate <= 18900000) | |
| 1045 | return 18900000; | |
| 1046 | if (rate <= 20800000) | |
| 1047 | return 20800000; | |
| 1048 | if (rate <= 23100000) | |
| 1049 | return 23100000; | |
| 1050 | if (rate <= 26000000) | |
| 1051 | return 26000000; | |
| 1052 | if (rate <= 29700000) | |
| 1053 | return 29700000; | |
| 1054 | if (rate <= 34700000) | |
| 1055 | return 34700000; | |
| 1056 | if (rate <= 41600000) | |
| 1057 | return 41600000; | |
| 1058 | /* Highest rate */ | |
| 1059 | return 52000000; | |
| 1060 | } | |
| 1061 | ||
| 1062 | static int mclk_clk_set_rate(struct clk_hw *hw, unsigned long rate, | |
| 1063 | unsigned long parent_rate) | |
| 1064 | { | |
| 1065 | u16 val; | |
| 1066 | u16 reg; | |
| 1067 | ||
| 1068 | switch (rate) { | |
| 1069 | case 18900000: | |
| 1070 | val = 0x0054; | |
| 1071 | break; | |
| 1072 | case 20800000: | |
| 1073 | val = 0x0044; | |
| 1074 | break; | |
| 1075 | case 23100000: | |
| 1076 | val = 0x0043; | |
| 1077 | break; | |
| 1078 | case 26000000: | |
| 1079 | val = 0x0033; | |
| 1080 | break; | |
| 1081 | case 29700000: | |
| 1082 | val = 0x0032; | |
| 1083 | break; | |
| 1084 | case 34700000: | |
| 1085 | val = 0x0022; | |
| 1086 | break; | |
| 1087 | case 41600000: | |
| 1088 | val = 0x0021; | |
| 1089 | break; | |
| 1090 | case 52000000: | |
| 1091 | val = 0x0011; | |
| 1092 | break; | |
| 1093 | case 104000000: | |
| 1094 | val = 0x0000; | |
| 1095 | break; | |
| 1096 | default: | |
| 1097 | return -EINVAL; | |
| 1098 | } | |
| 1099 | ||
| 1100 | reg = readw(syscon_vbase + U300_SYSCON_MMF0R) & | |
| 1101 | ~U300_SYSCON_MMF0R_MASK; | |
| 1102 | writew(reg | val, syscon_vbase + U300_SYSCON_MMF0R); | |
| 1103 | return 0; | |
| 1104 | } | |
| 1105 | ||
| 1106 | static const struct clk_ops mclk_ops = { | |
| 1107 | .prepare = mclk_clk_prepare, | |
| 1108 | .recalc_rate = mclk_clk_recalc_rate, | |
| 1109 | .round_rate = mclk_clk_round_rate, | |
| 1110 | .set_rate = mclk_clk_set_rate, | |
| 1111 | }; | |
| 1112 | ||
| 1113 | static struct clk * __init | |
| 1114 | mclk_clk_register(struct device *dev, const char *name, | |
| 1115 | const char *parent_name, bool is_mspro) | |
| 1116 | { | |
| 1117 | struct clk *clk; | |
| 1118 | struct clk_mclk *mclk; | |
| 1119 | struct clk_init_data init; | |
| 1120 | ||
| 1121 | mclk = kzalloc(sizeof(struct clk_mclk), GFP_KERNEL); | |
| 1122 | if (!mclk) { | |
| 1123 | pr_err("could not allocate MMC/SD clock %s\n", | |
| 1124 | name); | |
| 1125 | return ERR_PTR(-ENOMEM); | |
| 1126 | } | |
| 1127 | init.name = "mclk"; | |
| 1128 | init.ops = &mclk_ops; | |
| 1129 | init.flags = 0; | |
| 1130 | init.parent_names = (parent_name ? &parent_name : NULL); | |
| 1131 | init.num_parents = (parent_name ? 1 : 0); | |
| 1132 | mclk->hw.init = &init; | |
| 1133 | mclk->is_mspro = is_mspro; | |
| 1134 | ||
| 1135 | clk = clk_register(dev, &mclk->hw); | |
| 1136 | if (IS_ERR(clk)) | |
| 1137 | kfree(mclk); | |
| 1138 | ||
| 1139 | return clk; | |
| 1140 | } | |
| 1141 | ||
| 85fb28be LW |
1142 | static void __init of_u300_syscon_mclk_init(struct device_node *np) |
| 1143 | { | |
| 1144 | struct clk *clk = ERR_PTR(-EINVAL); | |
| 1145 | const char *clk_name = np->name; | |
| 1146 | const char *parent_name; | |
| 1147 | ||
| 1148 | parent_name = of_clk_get_parent_name(np, 0); | |
| 1149 | clk = mclk_clk_register(NULL, clk_name, parent_name, false); | |
| 1150 | if (!IS_ERR(clk)) | |
| 1151 | of_clk_add_provider(np, of_clk_src_simple_get, clk); | |
| 1152 | } | |
| 1153 | ||
| edead9f8 | 1154 | static const struct of_device_id u300_clk_match[] __initconst = { |
| 14c26071 LW |
1155 | { |
| 1156 | .compatible = "fixed-clock", | |
| 1157 | .data = of_fixed_clk_setup, | |
| 1158 | }, | |
| 1159 | { | |
| 1160 | .compatible = "fixed-factor-clock", | |
| 1161 | .data = of_fixed_factor_clk_setup, | |
| 1162 | }, | |
| bba5f2cc LW |
1163 | { |
| 1164 | .compatible = "stericsson,u300-syscon-clk", | |
| 1165 | .data = of_u300_syscon_clk_init, | |
| 1166 | }, | |
| 85fb28be LW |
1167 | { |
| 1168 | .compatible = "stericsson,u300-syscon-mclk", | |
| 1169 | .data = of_u300_syscon_mclk_init, | |
| 1170 | }, | |
| 65e75d42 | 1171 | {} |
| 14c26071 LW |
1172 | }; |
| 1173 | ||
| 85fb28be | 1174 | |
| 50667d63 LW |
1175 | void __init u300_clk_init(void __iomem *base) |
| 1176 | { | |
| 1177 | u16 val; | |
| 50667d63 LW |
1178 | |
| 1179 | syscon_vbase = base; | |
| 1180 | ||
| 1181 | /* Set system to run at PLL208, max performance, a known state. */ | |
| 1182 | val = readw(syscon_vbase + U300_SYSCON_CCR); | |
| 1183 | val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK; | |
| 1184 | writew(val, syscon_vbase + U300_SYSCON_CCR); | |
| 1185 | /* Wait for the PLL208 to lock if not locked in yet */ | |
| 1186 | while (!(readw(syscon_vbase + U300_SYSCON_CSR) & | |
| 1187 | U300_SYSCON_CSR_PLL208_LOCK_IND)); | |
| 1188 | ||
| 1189 | /* Power management enable */ | |
| 1190 | val = readw(syscon_vbase + U300_SYSCON_PMCR); | |
| 1191 | val |= U300_SYSCON_PMCR_PWR_MGNT_ENABLE; | |
| 1192 | writew(val, syscon_vbase + U300_SYSCON_PMCR); | |
| 1193 | ||
| 14c26071 | 1194 | of_clk_init(u300_clk_match); |
| 50667d63 | 1195 | } |