projects / deliverable / linux.git / blame
| Commit | Line | Data |
|---|---|---|
| 489bccea MW |
1 | /* |
| 2 | * Copyright (C) ST-Ericsson SA 2011 | |
| 3 | * | |
| 4 | * License Terms: GNU General Public License v2 | |
| 5 | * Author: Mattias Wallin <mattias.wallin@stericsson.com> for ST-Ericsson | |
| 6 | * Author: Sundar Iyer for ST-Ericsson | |
| 7 | * sched_clock implementation is based on: | |
| 8 | * plat-nomadik/timer.c Linus Walleij <linus.walleij@stericsson.com> | |
| 9 | * | |
| 10 | * DBx500-PRCMU Timer | |
| 11 | * The PRCMU has 5 timers which are available in a always-on | |
| 12 | * power domain. We use the Timer 4 for our always-on clock | |
| 13 | * source on DB8500 and Timer 3 on DB5500. | |
| 14 | */ | |
| 15 | #include <linux/clockchips.h> | |
| 16 | #include <linux/clksrc-dbx500-prcmu.h> | |
| 17 | ||
| 18 | #include <asm/sched_clock.h> | |
| 19 | ||
| 20 | #include <mach/setup.h> | |
| 21 | #include <mach/hardware.h> | |
| 22 | ||
| 23 | #define RATE_32K 32768 | |
| 24 | ||
| 25 | #define TIMER_MODE_CONTINOUS 0x1 | |
| 26 | #define TIMER_DOWNCOUNT_VAL 0xffffffff | |
| 27 | ||
| 28 | #define PRCMU_TIMER_REF 0 | |
| 29 | #define PRCMU_TIMER_DOWNCOUNT 0x4 | |
| 30 | #define PRCMU_TIMER_MODE 0x8 | |
| 31 | ||
| 32 | #define SCHED_CLOCK_MIN_WRAP 131072 /* 2^32 / 32768 */ | |
| 33 | ||
| b1e3be06 | 34 | static void __iomem *clksrc_dbx500_timer_base; |
| 489bccea MW |
35 | |
| 36 | static cycle_t clksrc_dbx500_prcmu_read(struct clocksource *cs) | |
| 37 | { | |
| 38 | u32 count, count2; | |
| 39 | ||
| 40 | do { | |
| 41 | count = readl(clksrc_dbx500_timer_base + | |
| 42 | PRCMU_TIMER_DOWNCOUNT); | |
| 43 | count2 = readl(clksrc_dbx500_timer_base + | |
| 44 | PRCMU_TIMER_DOWNCOUNT); | |
| 45 | } while (count2 != count); | |
| 46 | ||
| 47 | /* Negate because the timer is a decrementing counter */ | |
| 48 | return ~count; | |
| 49 | } | |
| 50 | ||
| 51 | static struct clocksource clocksource_dbx500_prcmu = { | |
| 52 | .name = "dbx500-prcmu-timer", | |
| 53 | .rating = 300, | |
| 54 | .read = clksrc_dbx500_prcmu_read, | |
| 489bccea MW |
55 | .mask = CLOCKSOURCE_MASK(32), |
| 56 | .flags = CLOCK_SOURCE_IS_CONTINUOUS, | |
| 57 | }; | |
| 58 | ||
| 59 | #ifdef CONFIG_CLKSRC_DBX500_PRCMU_SCHED_CLOCK | |
| 489bccea | 60 | |
| cfef0320 | 61 | static u32 notrace dbx500_prcmu_sched_clock_read(void) |
| 489bccea | 62 | { |
| 489bccea MW |
63 | if (unlikely(!clksrc_dbx500_timer_base)) |
| 64 | return 0; | |
| 65 | ||
| cfef0320 | 66 | return clksrc_dbx500_prcmu_read(&clocksource_dbx500_prcmu); |
| 489bccea MW |
67 | } |
| 68 | ||
| 489bccea MW |
69 | #endif |
| 70 | ||
| b1e3be06 | 71 | void __init clksrc_dbx500_prcmu_init(void __iomem *base) |
| 489bccea | 72 | { |
| b1e3be06 LW |
73 | clksrc_dbx500_timer_base = base; |
| 74 | ||
| 489bccea MW |
75 | /* |
| 76 | * The A9 sub system expects the timer to be configured as | |
| 77 | * a continous looping timer. | |
| 78 | * The PRCMU should configure it but if it for some reason | |
| 79 | * don't we do it here. | |
| 80 | */ | |
| 81 | if (readl(clksrc_dbx500_timer_base + PRCMU_TIMER_MODE) != | |
| 82 | TIMER_MODE_CONTINOUS) { | |
| 83 | writel(TIMER_MODE_CONTINOUS, | |
| 84 | clksrc_dbx500_timer_base + PRCMU_TIMER_MODE); | |
| 85 | writel(TIMER_DOWNCOUNT_VAL, | |
| 86 | clksrc_dbx500_timer_base + PRCMU_TIMER_REF); | |
| 87 | } | |
| 88 | #ifdef CONFIG_CLKSRC_DBX500_PRCMU_SCHED_CLOCK | |
| cfef0320 | 89 | setup_sched_clock(dbx500_prcmu_sched_clock_read, |
| 489bccea MW |
90 | 32, RATE_32K); |
| 91 | #endif | |
| 13f0f030 | 92 | clocksource_register_hz(&clocksource_dbx500_prcmu, RATE_32K); |
| 489bccea | 93 | } |