Commit | Line | Data |
---|---|---|
420390f0 RD |
1 | /* |
2 | * Intel 82975X Memory Controller kernel module | |
3 | * (C) 2007 aCarLab (India) Pvt. Ltd. (http://acarlab.com) | |
4 | * (C) 2007 jetzbroadband (http://jetzbroadband.com) | |
5 | * This file may be distributed under the terms of the | |
6 | * GNU General Public License. | |
7 | * | |
8 | * Written by Arvind R. | |
9 | * Copied from i82875p_edac.c source: | |
10 | */ | |
11 | ||
12 | #include <linux/module.h> | |
13 | #include <linux/init.h> | |
14 | #include <linux/pci.h> | |
15 | #include <linux/pci_ids.h> | |
c3c52bce | 16 | #include <linux/edac.h> |
420390f0 RD |
17 | #include "edac_core.h" |
18 | ||
19 | #define I82975X_REVISION " Ver: 1.0.0 " __DATE__ | |
20 | #define EDAC_MOD_STR "i82975x_edac" | |
21 | ||
22 | #define i82975x_printk(level, fmt, arg...) \ | |
23 | edac_printk(level, "i82975x", fmt, ##arg) | |
24 | ||
25 | #define i82975x_mc_printk(mci, level, fmt, arg...) \ | |
26 | edac_mc_chipset_printk(mci, level, "i82975x", fmt, ##arg) | |
27 | ||
28 | #ifndef PCI_DEVICE_ID_INTEL_82975_0 | |
29 | #define PCI_DEVICE_ID_INTEL_82975_0 0x277c | |
30 | #endif /* PCI_DEVICE_ID_INTEL_82975_0 */ | |
31 | ||
32 | #define I82975X_NR_CSROWS(nr_chans) (8/(nr_chans)) | |
33 | ||
34 | /* Intel 82975X register addresses - device 0 function 0 - DRAM Controller */ | |
35 | #define I82975X_EAP 0x58 /* Dram Error Address Pointer (32b) | |
36 | * | |
37 | * 31:7 128 byte cache-line address | |
38 | * 6:1 reserved | |
39 | * 0 0: CH0; 1: CH1 | |
40 | */ | |
41 | ||
42 | #define I82975X_DERRSYN 0x5c /* Dram Error SYNdrome (8b) | |
43 | * | |
44 | * 7:0 DRAM ECC Syndrome | |
45 | */ | |
46 | ||
47 | #define I82975X_DES 0x5d /* Dram ERRor DeSTination (8b) | |
48 | * 0h: Processor Memory Reads | |
49 | * 1h:7h reserved | |
50 | * More - See Page 65 of Intel DocSheet. | |
51 | */ | |
52 | ||
53 | #define I82975X_ERRSTS 0xc8 /* Error Status Register (16b) | |
54 | * | |
55 | * 15:12 reserved | |
56 | * 11 Thermal Sensor Event | |
57 | * 10 reserved | |
58 | * 9 non-DRAM lock error (ndlock) | |
59 | * 8 Refresh Timeout | |
60 | * 7:2 reserved | |
61 | * 1 ECC UE (multibit DRAM error) | |
62 | * 0 ECC CE (singlebit DRAM error) | |
63 | */ | |
64 | ||
65 | /* Error Reporting is supported by 3 mechanisms: | |
66 | 1. DMI SERR generation ( ERRCMD ) | |
67 | 2. SMI DMI generation ( SMICMD ) | |
68 | 3. SCI DMI generation ( SCICMD ) | |
69 | NOTE: Only ONE of the three must be enabled | |
70 | */ | |
71 | #define I82975X_ERRCMD 0xca /* Error Command (16b) | |
72 | * | |
73 | * 15:12 reserved | |
74 | * 11 Thermal Sensor Event | |
75 | * 10 reserved | |
76 | * 9 non-DRAM lock error (ndlock) | |
77 | * 8 Refresh Timeout | |
78 | * 7:2 reserved | |
79 | * 1 ECC UE (multibit DRAM error) | |
80 | * 0 ECC CE (singlebit DRAM error) | |
81 | */ | |
82 | ||
83 | #define I82975X_SMICMD 0xcc /* Error Command (16b) | |
84 | * | |
85 | * 15:2 reserved | |
86 | * 1 ECC UE (multibit DRAM error) | |
87 | * 0 ECC CE (singlebit DRAM error) | |
88 | */ | |
89 | ||
90 | #define I82975X_SCICMD 0xce /* Error Command (16b) | |
91 | * | |
92 | * 15:2 reserved | |
93 | * 1 ECC UE (multibit DRAM error) | |
94 | * 0 ECC CE (singlebit DRAM error) | |
95 | */ | |
96 | ||
97 | #define I82975X_XEAP 0xfc /* Extended Dram Error Address Pointer (8b) | |
98 | * | |
99 | * 7:1 reserved | |
100 | * 0 Bit32 of the Dram Error Address | |
101 | */ | |
102 | ||
103 | #define I82975X_MCHBAR 0x44 /* | |
104 | * | |
105 | * 31:14 Base Addr of 16K memory-mapped | |
106 | * configuration space | |
107 | * 13:1 reserverd | |
108 | * 0 mem-mapped config space enable | |
109 | */ | |
110 | ||
111 | /* NOTE: Following addresses have to indexed using MCHBAR offset (44h, 32b) */ | |
112 | /* Intel 82975x memory mapped register space */ | |
113 | ||
114 | #define I82975X_DRB_SHIFT 25 /* fixed 32MiB grain */ | |
115 | ||
116 | #define I82975X_DRB 0x100 /* DRAM Row Boundary (8b x 8) | |
117 | * | |
118 | * 7 set to 1 in highest DRB of | |
119 | * channel if 4GB in ch. | |
120 | * 6:2 upper boundary of rank in | |
121 | * 32MB grains | |
122 | * 1:0 set to 0 | |
123 | */ | |
124 | #define I82975X_DRB_CH0R0 0x100 | |
125 | #define I82975X_DRB_CH0R1 0x101 | |
126 | #define I82975X_DRB_CH0R2 0x102 | |
127 | #define I82975X_DRB_CH0R3 0x103 | |
128 | #define I82975X_DRB_CH1R0 0x180 | |
129 | #define I82975X_DRB_CH1R1 0x181 | |
130 | #define I82975X_DRB_CH1R2 0x182 | |
131 | #define I82975X_DRB_CH1R3 0x183 | |
132 | ||
133 | ||
134 | #define I82975X_DRA 0x108 /* DRAM Row Attribute (4b x 8) | |
135 | * defines the PAGE SIZE to be used | |
136 | * for the rank | |
137 | * 7 reserved | |
138 | * 6:4 row attr of odd rank, i.e. 1 | |
139 | * 3 reserved | |
140 | * 2:0 row attr of even rank, i.e. 0 | |
141 | * | |
142 | * 000 = unpopulated | |
143 | * 001 = reserved | |
144 | * 010 = 4KiB | |
145 | * 011 = 8KiB | |
146 | * 100 = 16KiB | |
147 | * others = reserved | |
148 | */ | |
149 | #define I82975X_DRA_CH0R01 0x108 | |
150 | #define I82975X_DRA_CH0R23 0x109 | |
151 | #define I82975X_DRA_CH1R01 0x188 | |
152 | #define I82975X_DRA_CH1R23 0x189 | |
153 | ||
154 | ||
155 | #define I82975X_BNKARC 0x10e /* Type of device in each rank - Bank Arch (16b) | |
156 | * | |
157 | * 15:8 reserved | |
158 | * 7:6 Rank 3 architecture | |
159 | * 5:4 Rank 2 architecture | |
160 | * 3:2 Rank 1 architecture | |
161 | * 1:0 Rank 0 architecture | |
162 | * | |
163 | * 00 => x16 devices; i.e 4 banks | |
164 | * 01 => x8 devices; i.e 8 banks | |
165 | */ | |
166 | #define I82975X_C0BNKARC 0x10e | |
167 | #define I82975X_C1BNKARC 0x18e | |
168 | ||
169 | ||
170 | ||
171 | #define I82975X_DRC 0x120 /* DRAM Controller Mode0 (32b) | |
172 | * | |
173 | * 31:30 reserved | |
174 | * 29 init complete | |
175 | * 28:11 reserved, according to Intel | |
176 | * 22:21 number of channels | |
177 | * 00=1 01=2 in 82875 | |
178 | * seems to be ECC mode | |
179 | * bits in 82975 in Asus | |
180 | * P5W | |
181 | * 19:18 Data Integ Mode | |
182 | * 00=none 01=ECC in 82875 | |
183 | * 10:8 refresh mode | |
184 | * 7 reserved | |
185 | * 6:4 mode select | |
186 | * 3:2 reserved | |
187 | * 1:0 DRAM type 10=Second Revision | |
188 | * DDR2 SDRAM | |
189 | * 00, 01, 11 reserved | |
190 | */ | |
191 | #define I82975X_DRC_CH0M0 0x120 | |
192 | #define I82975X_DRC_CH1M0 0x1A0 | |
193 | ||
194 | ||
195 | #define I82975X_DRC_M1 0x124 /* DRAM Controller Mode1 (32b) | |
196 | * 31 0=Standard Address Map | |
197 | * 1=Enhanced Address Map | |
198 | * 30:0 reserved | |
199 | */ | |
200 | ||
201 | #define I82975X_DRC_CH0M1 0x124 | |
202 | #define I82975X_DRC_CH1M1 0x1A4 | |
203 | ||
204 | enum i82975x_chips { | |
205 | I82975X = 0, | |
206 | }; | |
207 | ||
208 | struct i82975x_pvt { | |
209 | void __iomem *mch_window; | |
210 | }; | |
211 | ||
212 | struct i82975x_dev_info { | |
213 | const char *ctl_name; | |
214 | }; | |
215 | ||
216 | struct i82975x_error_info { | |
217 | u16 errsts; | |
218 | u32 eap; | |
219 | u8 des; | |
220 | u8 derrsyn; | |
221 | u16 errsts2; | |
222 | u8 chan; /* the channel is bit 0 of EAP */ | |
223 | u8 xeap; /* extended eap bit */ | |
224 | }; | |
225 | ||
226 | static const struct i82975x_dev_info i82975x_devs[] = { | |
227 | [I82975X] = { | |
228 | .ctl_name = "i82975x" | |
229 | }, | |
230 | }; | |
231 | ||
232 | static struct pci_dev *mci_pdev; /* init dev: in case that AGP code has | |
233 | * already registered driver | |
234 | */ | |
235 | ||
236 | static int i82975x_registered = 1; | |
237 | ||
238 | static void i82975x_get_error_info(struct mem_ctl_info *mci, | |
239 | struct i82975x_error_info *info) | |
240 | { | |
241 | struct pci_dev *pdev; | |
242 | ||
243 | pdev = to_pci_dev(mci->dev); | |
244 | ||
245 | /* | |
246 | * This is a mess because there is no atomic way to read all the | |
247 | * registers at once and the registers can transition from CE being | |
248 | * overwritten by UE. | |
249 | */ | |
250 | pci_read_config_word(pdev, I82975X_ERRSTS, &info->errsts); | |
251 | pci_read_config_dword(pdev, I82975X_EAP, &info->eap); | |
252 | pci_read_config_byte(pdev, I82975X_XEAP, &info->xeap); | |
253 | pci_read_config_byte(pdev, I82975X_DES, &info->des); | |
254 | pci_read_config_byte(pdev, I82975X_DERRSYN, &info->derrsyn); | |
255 | pci_read_config_word(pdev, I82975X_ERRSTS, &info->errsts2); | |
256 | ||
257 | pci_write_bits16(pdev, I82975X_ERRSTS, 0x0003, 0x0003); | |
258 | ||
259 | /* | |
260 | * If the error is the same then we can for both reads then | |
261 | * the first set of reads is valid. If there is a change then | |
262 | * there is a CE no info and the second set of reads is valid | |
263 | * and should be UE info. | |
264 | */ | |
265 | if (!(info->errsts2 & 0x0003)) | |
266 | return; | |
267 | ||
268 | if ((info->errsts ^ info->errsts2) & 0x0003) { | |
269 | pci_read_config_dword(pdev, I82975X_EAP, &info->eap); | |
270 | pci_read_config_byte(pdev, I82975X_XEAP, &info->xeap); | |
271 | pci_read_config_byte(pdev, I82975X_DES, &info->des); | |
272 | pci_read_config_byte(pdev, I82975X_DERRSYN, | |
273 | &info->derrsyn); | |
274 | } | |
275 | } | |
276 | ||
277 | static int i82975x_process_error_info(struct mem_ctl_info *mci, | |
278 | struct i82975x_error_info *info, int handle_errors) | |
279 | { | |
280 | int row, multi_chan, chan; | |
281 | ||
282 | multi_chan = mci->csrows[0].nr_channels - 1; | |
283 | ||
284 | if (!(info->errsts2 & 0x0003)) | |
285 | return 0; | |
286 | ||
287 | if (!handle_errors) | |
288 | return 1; | |
289 | ||
290 | if ((info->errsts ^ info->errsts2) & 0x0003) { | |
291 | edac_mc_handle_ce_no_info(mci, "UE overwrote CE"); | |
292 | info->errsts = info->errsts2; | |
293 | } | |
294 | ||
295 | chan = info->eap & 1; | |
296 | info->eap >>= 1; | |
297 | if (info->xeap ) | |
298 | info->eap |= 0x80000000; | |
299 | info->eap >>= PAGE_SHIFT; | |
300 | row = edac_mc_find_csrow_by_page(mci, info->eap); | |
301 | ||
302 | if (info->errsts & 0x0002) | |
303 | edac_mc_handle_ue(mci, info->eap, 0, row, "i82975x UE"); | |
304 | else | |
305 | edac_mc_handle_ce(mci, info->eap, 0, info->derrsyn, row, | |
306 | multi_chan ? chan : 0, | |
307 | "i82975x CE"); | |
308 | ||
309 | return 1; | |
310 | } | |
311 | ||
312 | static void i82975x_check(struct mem_ctl_info *mci) | |
313 | { | |
314 | struct i82975x_error_info info; | |
315 | ||
316 | debugf1("MC%d: %s()\n", mci->mc_idx, __func__); | |
317 | i82975x_get_error_info(mci, &info); | |
318 | i82975x_process_error_info(mci, &info, 1); | |
319 | } | |
320 | ||
321 | /* Return 1 if dual channel mode is active. Else return 0. */ | |
322 | static int dual_channel_active(void __iomem *mch_window) | |
323 | { | |
324 | /* | |
325 | * We treat interleaved-symmetric configuration as dual-channel - EAP's | |
326 | * bit-0 giving the channel of the error location. | |
327 | * | |
328 | * All other configurations are treated as single channel - the EAP's | |
329 | * bit-0 will resolve ok in symmetric area of mixed | |
330 | * (symmetric/asymmetric) configurations | |
331 | */ | |
332 | u8 drb[4][2]; | |
333 | int row; | |
334 | int dualch; | |
335 | ||
336 | for (dualch = 1, row = 0; dualch && (row < 4); row++) { | |
337 | drb[row][0] = readb(mch_window + I82975X_DRB + row); | |
338 | drb[row][1] = readb(mch_window + I82975X_DRB + row + 0x80); | |
339 | dualch = dualch && (drb[row][0] == drb[row][1]); | |
340 | } | |
341 | return dualch; | |
342 | } | |
343 | ||
344 | static enum dev_type i82975x_dram_type(void __iomem *mch_window, int rank) | |
345 | { | |
346 | /* | |
347 | * ASUS P5W DH either does not program this register or programs | |
348 | * it wrong! | |
349 | * ECC is possible on i92975x ONLY with DEV_X8 which should mean 'val' | |
350 | * for each rank should be 01b - the LSB of the word should be 0x55; | |
351 | * but it reads 0! | |
352 | */ | |
353 | return DEV_X8; | |
354 | } | |
355 | ||
356 | static void i82975x_init_csrows(struct mem_ctl_info *mci, | |
357 | struct pci_dev *pdev, void __iomem *mch_window) | |
358 | { | |
359 | struct csrow_info *csrow; | |
360 | unsigned long last_cumul_size; | |
361 | u8 value; | |
362 | u32 cumul_size; | |
363 | int index; | |
364 | ||
365 | last_cumul_size = 0; | |
366 | ||
367 | /* | |
368 | * 82875 comment: | |
369 | * The dram row boundary (DRB) reg values are boundary address | |
370 | * for each DRAM row with a granularity of 32 or 64MB (single/dual | |
371 | * channel operation). DRB regs are cumulative; therefore DRB7 will | |
372 | * contain the total memory contained in all eight rows. | |
373 | * | |
374 | * FIXME: | |
375 | * EDAC currently works for Dual-channel Interleaved configuration. | |
376 | * Other configurations, which the chip supports, need fixing/testing. | |
377 | * | |
378 | */ | |
379 | ||
380 | for (index = 0; index < mci->nr_csrows; index++) { | |
381 | csrow = &mci->csrows[index]; | |
382 | ||
383 | value = readb(mch_window + I82975X_DRB + index + | |
384 | ((index >= 4) ? 0x80 : 0)); | |
385 | cumul_size = value; | |
386 | cumul_size <<= (I82975X_DRB_SHIFT - PAGE_SHIFT); | |
387 | debugf3("%s(): (%d) cumul_size 0x%x\n", __func__, index, | |
388 | cumul_size); | |
389 | if (cumul_size == last_cumul_size) | |
390 | continue; /* not populated */ | |
391 | ||
392 | csrow->first_page = last_cumul_size; | |
393 | csrow->last_page = cumul_size - 1; | |
394 | csrow->nr_pages = cumul_size - last_cumul_size; | |
395 | last_cumul_size = cumul_size; | |
396 | csrow->grain = 1 << 7; /* I82975X_EAP has 128B resolution */ | |
397 | csrow->mtype = MEM_DDR; /* i82975x supports only DDR2 */ | |
398 | csrow->dtype = i82975x_dram_type(mch_window, index); | |
399 | csrow->edac_mode = EDAC_SECDED; /* only supported */ | |
400 | } | |
401 | } | |
402 | ||
403 | /* #define i82975x_DEBUG_IOMEM */ | |
404 | ||
405 | #ifdef i82975x_DEBUG_IOMEM | |
406 | static void i82975x_print_dram_timings(void __iomem *mch_window) | |
407 | { | |
408 | /* | |
409 | * The register meanings are from Intel specs; | |
410 | * (shows 13-5-5-5 for 800-DDR2) | |
411 | * Asus P5W Bios reports 15-5-4-4 | |
412 | * What's your religion? | |
413 | */ | |
414 | static const int caslats[4] = { 5, 4, 3, 6 }; | |
415 | u32 dtreg[2]; | |
416 | ||
417 | dtreg[0] = readl(mch_window + 0x114); | |
418 | dtreg[1] = readl(mch_window + 0x194); | |
419 | i82975x_printk(KERN_INFO, "DRAM Timings : Ch0 Ch1\n" | |
420 | " RAS Active Min = %d %d\n" | |
421 | " CAS latency = %d %d\n" | |
422 | " RAS to CAS = %d %d\n" | |
423 | " RAS precharge = %d %d\n", | |
424 | (dtreg[0] >> 19 ) & 0x0f, | |
425 | (dtreg[1] >> 19) & 0x0f, | |
426 | caslats[(dtreg[0] >> 8) & 0x03], | |
427 | caslats[(dtreg[1] >> 8) & 0x03], | |
428 | ((dtreg[0] >> 4) & 0x07) + 2, | |
429 | ((dtreg[1] >> 4) & 0x07) + 2, | |
430 | (dtreg[0] & 0x07) + 2, | |
431 | (dtreg[1] & 0x07) + 2 | |
432 | ); | |
433 | ||
434 | } | |
435 | #endif | |
436 | ||
437 | static int i82975x_probe1(struct pci_dev *pdev, int dev_idx) | |
438 | { | |
439 | int rc = -ENODEV; | |
440 | struct mem_ctl_info *mci; | |
441 | struct i82975x_pvt *pvt; | |
442 | void __iomem *mch_window; | |
443 | u32 mchbar; | |
444 | u32 drc[2]; | |
445 | struct i82975x_error_info discard; | |
446 | int chans; | |
447 | #ifdef i82975x_DEBUG_IOMEM | |
448 | u8 c0drb[4]; | |
449 | u8 c1drb[4]; | |
450 | #endif | |
451 | ||
452 | debugf0("%s()\n", __func__); | |
453 | ||
454 | pci_read_config_dword(pdev, I82975X_MCHBAR, &mchbar); | |
455 | if (!(mchbar & 1)) { | |
456 | debugf3("%s(): failed, MCHBAR disabled!\n", __func__); | |
457 | goto fail0; | |
458 | } | |
459 | mchbar &= 0xffffc000; /* bits 31:14 used for 16K window */ | |
460 | mch_window = ioremap_nocache(mchbar, 0x1000); | |
461 | ||
462 | #ifdef i82975x_DEBUG_IOMEM | |
463 | i82975x_printk(KERN_INFO, "MCHBAR real = %0x, remapped = %p\n", | |
464 | mchbar, mch_window); | |
465 | ||
466 | c0drb[0] = readb(mch_window + I82975X_DRB_CH0R0); | |
467 | c0drb[1] = readb(mch_window + I82975X_DRB_CH0R1); | |
468 | c0drb[2] = readb(mch_window + I82975X_DRB_CH0R2); | |
469 | c0drb[3] = readb(mch_window + I82975X_DRB_CH0R3); | |
470 | c1drb[0] = readb(mch_window + I82975X_DRB_CH1R0); | |
471 | c1drb[1] = readb(mch_window + I82975X_DRB_CH1R1); | |
472 | c1drb[2] = readb(mch_window + I82975X_DRB_CH1R2); | |
473 | c1drb[3] = readb(mch_window + I82975X_DRB_CH1R3); | |
474 | i82975x_printk(KERN_INFO, "DRBCH0R0 = 0x%02x\n", c0drb[0]); | |
475 | i82975x_printk(KERN_INFO, "DRBCH0R1 = 0x%02x\n", c0drb[1]); | |
476 | i82975x_printk(KERN_INFO, "DRBCH0R2 = 0x%02x\n", c0drb[2]); | |
477 | i82975x_printk(KERN_INFO, "DRBCH0R3 = 0x%02x\n", c0drb[3]); | |
478 | i82975x_printk(KERN_INFO, "DRBCH1R0 = 0x%02x\n", c1drb[0]); | |
479 | i82975x_printk(KERN_INFO, "DRBCH1R1 = 0x%02x\n", c1drb[1]); | |
480 | i82975x_printk(KERN_INFO, "DRBCH1R2 = 0x%02x\n", c1drb[2]); | |
481 | i82975x_printk(KERN_INFO, "DRBCH1R3 = 0x%02x\n", c1drb[3]); | |
482 | #endif | |
483 | ||
484 | drc[0] = readl(mch_window + I82975X_DRC_CH0M0); | |
485 | drc[1] = readl(mch_window + I82975X_DRC_CH1M0); | |
486 | #ifdef i82975x_DEBUG_IOMEM | |
487 | i82975x_printk(KERN_INFO, "DRC_CH0 = %0x, %s\n", drc[0], | |
488 | ((drc[0] >> 21) & 3) == 1 ? | |
489 | "ECC enabled" : "ECC disabled"); | |
490 | i82975x_printk(KERN_INFO, "DRC_CH1 = %0x, %s\n", drc[1], | |
491 | ((drc[1] >> 21) & 3) == 1 ? | |
492 | "ECC enabled" : "ECC disabled"); | |
493 | ||
494 | i82975x_printk(KERN_INFO, "C0 BNKARC = %0x\n", | |
495 | readw(mch_window + I82975X_C0BNKARC)); | |
496 | i82975x_printk(KERN_INFO, "C1 BNKARC = %0x\n", | |
497 | readw(mch_window + I82975X_C1BNKARC)); | |
498 | i82975x_print_dram_timings(mch_window); | |
499 | goto fail1; | |
500 | #endif | |
501 | if (!(((drc[0] >> 21) & 3) == 1 || ((drc[1] >> 21) & 3) == 1)) { | |
502 | i82975x_printk(KERN_INFO, "ECC disabled on both channels.\n"); | |
503 | goto fail1; | |
504 | } | |
505 | ||
506 | chans = dual_channel_active(mch_window) + 1; | |
507 | ||
508 | /* assuming only one controller, index thus is 0 */ | |
509 | mci = edac_mc_alloc(sizeof(*pvt), I82975X_NR_CSROWS(chans), | |
510 | chans, 0); | |
511 | if (!mci) { | |
512 | rc = -ENOMEM; | |
513 | goto fail1; | |
514 | } | |
515 | ||
516 | debugf3("%s(): init mci\n", __func__); | |
517 | mci->dev = &pdev->dev; | |
518 | mci->mtype_cap = MEM_FLAG_DDR; | |
519 | mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED; | |
520 | mci->edac_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED; | |
521 | mci->mod_name = EDAC_MOD_STR; | |
522 | mci->mod_ver = I82975X_REVISION; | |
523 | mci->ctl_name = i82975x_devs[dev_idx].ctl_name; | |
524 | mci->edac_check = i82975x_check; | |
525 | mci->ctl_page_to_phys = NULL; | |
526 | debugf3("%s(): init pvt\n", __func__); | |
527 | pvt = (struct i82975x_pvt *) mci->pvt_info; | |
528 | pvt->mch_window = mch_window; | |
529 | i82975x_init_csrows(mci, pdev, mch_window); | |
530 | i82975x_get_error_info(mci, &discard); /* clear counters */ | |
531 | ||
532 | /* finalize this instance of memory controller with edac core */ | |
533 | if (edac_mc_add_mc(mci)) { | |
534 | debugf3("%s(): failed edac_mc_add_mc()\n", __func__); | |
535 | goto fail2; | |
536 | } | |
537 | ||
538 | /* get this far and it's successful */ | |
539 | debugf3("%s(): success\n", __func__); | |
540 | return 0; | |
541 | ||
542 | fail2: | |
543 | edac_mc_free(mci); | |
544 | ||
545 | fail1: | |
546 | iounmap(mch_window); | |
547 | fail0: | |
548 | return rc; | |
549 | } | |
550 | ||
551 | /* returns count (>= 0), or negative on error */ | |
552 | static int __devinit i82975x_init_one(struct pci_dev *pdev, | |
553 | const struct pci_device_id *ent) | |
554 | { | |
555 | int rc; | |
556 | ||
557 | debugf0("%s()\n", __func__); | |
558 | ||
559 | if (pci_enable_device(pdev) < 0) | |
560 | return -EIO; | |
561 | ||
562 | rc = i82975x_probe1(pdev, ent->driver_data); | |
563 | ||
564 | if (mci_pdev == NULL) | |
565 | mci_pdev = pci_dev_get(pdev); | |
566 | ||
567 | return rc; | |
568 | } | |
569 | ||
570 | static void __devexit i82975x_remove_one(struct pci_dev *pdev) | |
571 | { | |
572 | struct mem_ctl_info *mci; | |
573 | struct i82975x_pvt *pvt; | |
574 | ||
575 | debugf0("%s()\n", __func__); | |
576 | ||
577 | mci = edac_mc_del_mc(&pdev->dev); | |
578 | if (mci == NULL) | |
579 | return; | |
580 | ||
581 | pvt = mci->pvt_info; | |
582 | if (pvt->mch_window) | |
583 | iounmap( pvt->mch_window ); | |
584 | ||
585 | edac_mc_free(mci); | |
586 | } | |
587 | ||
588 | static const struct pci_device_id i82975x_pci_tbl[] __devinitdata = { | |
589 | { | |
590 | PCI_VEND_DEV(INTEL, 82975_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0, | |
591 | I82975X | |
592 | }, | |
593 | { | |
594 | 0, | |
595 | } /* 0 terminated list. */ | |
596 | }; | |
597 | ||
598 | MODULE_DEVICE_TABLE(pci, i82975x_pci_tbl); | |
599 | ||
600 | static struct pci_driver i82975x_driver = { | |
601 | .name = EDAC_MOD_STR, | |
602 | .probe = i82975x_init_one, | |
603 | .remove = __devexit_p(i82975x_remove_one), | |
604 | .id_table = i82975x_pci_tbl, | |
605 | }; | |
606 | ||
607 | static int __init i82975x_init(void) | |
608 | { | |
609 | int pci_rc; | |
610 | ||
611 | debugf3("%s()\n", __func__); | |
612 | ||
c3c52bce HM |
613 | /* Ensure that the OPSTATE is set correctly for POLL or NMI */ |
614 | opstate_init(); | |
615 | ||
420390f0 RD |
616 | pci_rc = pci_register_driver(&i82975x_driver); |
617 | if (pci_rc < 0) | |
618 | goto fail0; | |
619 | ||
620 | if (mci_pdev == NULL) { | |
621 | mci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL, | |
622 | PCI_DEVICE_ID_INTEL_82975_0, NULL); | |
623 | ||
624 | if (!mci_pdev) { | |
625 | debugf0("i82975x pci_get_device fail\n"); | |
626 | pci_rc = -ENODEV; | |
627 | goto fail1; | |
628 | } | |
629 | ||
630 | pci_rc = i82975x_init_one(mci_pdev, i82975x_pci_tbl); | |
631 | ||
632 | if (pci_rc < 0) { | |
633 | debugf0("i82975x init fail\n"); | |
634 | pci_rc = -ENODEV; | |
635 | goto fail1; | |
636 | } | |
637 | } | |
638 | ||
639 | return 0; | |
640 | ||
641 | fail1: | |
642 | pci_unregister_driver(&i82975x_driver); | |
643 | ||
644 | fail0: | |
645 | if (mci_pdev != NULL) | |
646 | pci_dev_put(mci_pdev); | |
647 | ||
648 | return pci_rc; | |
649 | } | |
650 | ||
651 | static void __exit i82975x_exit(void) | |
652 | { | |
653 | debugf3("%s()\n", __func__); | |
654 | ||
655 | pci_unregister_driver(&i82975x_driver); | |
656 | ||
657 | if (!i82975x_registered) { | |
658 | i82975x_remove_one(mci_pdev); | |
659 | pci_dev_put(mci_pdev); | |
660 | } | |
661 | } | |
662 | ||
663 | module_init(i82975x_init); | |
664 | module_exit(i82975x_exit); | |
665 | ||
666 | MODULE_LICENSE("GPL"); | |
25527885 | 667 | MODULE_AUTHOR("Arvind R. <arvino55@gmail.com>"); |
420390f0 | 668 | MODULE_DESCRIPTION("MC support for Intel 82975 memory hub controllers"); |
c3c52bce HM |
669 | |
670 | module_param(edac_op_state, int, 0444); | |
671 | MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI"); |