Commit | Line | Data |
---|---|---|
a9c5fff5 | 1 | # |
e849dc04 | 2 | # GPIO infrastructure and drivers |
a9c5fff5 DB |
3 | # |
4 | ||
7563bbf8 MB |
5 | config ARCH_HAVE_CUSTOM_GPIO_H |
6 | bool | |
7 | help | |
8 | Selecting this config option from the architecture Kconfig allows | |
9 | the architecture to provide a custom asm/gpio.h implementation | |
10 | overriding the default implementations. New uses of this are | |
11 | strongly discouraged. | |
12 | ||
7444a72e | 13 | config ARCH_WANT_OPTIONAL_GPIOLIB |
a9c5fff5 | 14 | bool |
7444a72e MB |
15 | help |
16 | Select this config option from the architecture Kconfig, if | |
17 | it is possible to use gpiolib on the architecture, but let the | |
18 | user decide whether to actually build it or not. | |
19 | Select this instead of ARCH_REQUIRE_GPIOLIB, if your architecture does | |
20 | not depend on GPIOs being available, but rather let the user | |
21 | decide whether he needs it or not. | |
22 | ||
23 | config ARCH_REQUIRE_GPIOLIB | |
24 | bool | |
25 | select GPIOLIB | |
a9c5fff5 DB |
26 | help |
27 | Platforms select gpiolib if they use this infrastructure | |
28 | for all their GPIOs, usually starting with ones integrated | |
29 | into SOC processors. | |
7444a72e MB |
30 | Selecting this from the architecture code will cause the gpiolib |
31 | code to always get built in. | |
32 | ||
33 | ||
34 | ||
35 | menuconfig GPIOLIB | |
36 | bool "GPIO Support" | |
37 | depends on ARCH_WANT_OPTIONAL_GPIOLIB || ARCH_REQUIRE_GPIOLIB | |
38 | select GENERIC_GPIO | |
39 | help | |
40 | This enables GPIO support through the generic GPIO library. | |
41 | You only need to enable this, if you also want to enable | |
e849dc04 | 42 | one or more of the GPIO drivers below. |
7444a72e MB |
43 | |
44 | If unsure, say N. | |
a9c5fff5 | 45 | |
7444a72e | 46 | if GPIOLIB |
a9c5fff5 | 47 | |
f141ed65 GL |
48 | config OF_GPIO |
49 | def_bool y | |
50 | depends on OF && !SPARC | |
51 | ||
a9c5fff5 DB |
52 | config DEBUG_GPIO |
53 | bool "Debug GPIO calls" | |
54 | depends on DEBUG_KERNEL | |
55 | help | |
56 | Say Y here to add some extra checks and diagnostics to GPIO calls. | |
692105b8 ML |
57 | These checks help ensure that GPIOs have been properly initialized |
58 | before they are used, and that sleeping calls are not made from | |
59 | non-sleeping contexts. They can make bitbanged serial protocols | |
a9c5fff5 DB |
60 | slower. The diagnostics help catch the type of setup errors |
61 | that are most common when setting up new platforms or boards. | |
62 | ||
d8f388d8 DB |
63 | config GPIO_SYSFS |
64 | bool "/sys/class/gpio/... (sysfs interface)" | |
65 | depends on SYSFS && EXPERIMENTAL | |
66 | help | |
67 | Say Y here to add a sysfs interface for GPIOs. | |
68 | ||
69 | This is mostly useful to work around omissions in a system's | |
70 | kernel support. Those are common in custom and semicustom | |
71 | hardware assembled using standard kernels with a minimum of | |
72 | custom patches. In those cases, userspace code may import | |
73 | a given GPIO from the kernel, if no kernel driver requested it. | |
74 | ||
75 | Kernel drivers may also request that a particular GPIO be | |
76 | exported to userspace; this can be useful when debugging. | |
77 | ||
c103de24 GL |
78 | config GPIO_GENERIC |
79 | tristate | |
80 | ||
e849dc04 | 81 | # put drivers in the right section, in alphabetical order |
a9c5fff5 | 82 | |
07bfc915 | 83 | config GPIO_DA9052 |
84 | tristate "Dialog DA9052 GPIO" | |
f5a26f89 | 85 | depends on PMIC_DA9052 && BROKEN |
07bfc915 | 86 | help |
87 | Say yes here to enable the GPIO driver for the DA9052 chip. | |
88 | ||
e952805d WS |
89 | config GPIO_MAX730X |
90 | tristate | |
91 | ||
e849dc04 | 92 | comment "Memory mapped GPIO drivers:" |
0bcb6069 | 93 | |
c103de24 GL |
94 | config GPIO_GENERIC_PLATFORM |
95 | tristate "Generic memory-mapped GPIO controller support (MMIO platform device)" | |
96 | select GPIO_GENERIC | |
aeec56e3 | 97 | help |
c103de24 | 98 | Say yes here to support basic platform_device memory-mapped GPIO controllers. |
aeec56e3 | 99 | |
9cc0cb3c DT |
100 | config GPIO_IT8761E |
101 | tristate "IT8761E GPIO support" | |
265fe02b | 102 | depends on X86 # unconditional access to IO space. |
9cc0cb3c DT |
103 | help |
104 | Say yes here to support GPIO functionality of IT8761E super I/O chip. | |
105 | ||
a07e103e MD |
106 | config GPIO_EM |
107 | tristate "Emma Mobile GPIO" | |
108 | depends on ARM | |
109 | help | |
110 | Say yes here to support GPIO on Renesas Emma Mobile SoCs. | |
111 | ||
c6b52c13 HS |
112 | config GPIO_EP93XX |
113 | def_bool y | |
114 | depends on ARCH_EP93XX | |
1e4c8842 | 115 | select GPIO_GENERIC |
c6b52c13 | 116 | |
5238f7bc JC |
117 | config GPIO_MM_LANTIQ |
118 | bool "Lantiq Memory mapped GPIOs" | |
119 | depends on LANTIQ && SOC_XWAY | |
120 | help | |
121 | This enables support for memory mapped GPIOs on the External Bus Unit | |
122 | (EBU) found on Lantiq SoCs. The gpios are output only as they are | |
123 | created by attaching a 16bit latch to the bus. | |
124 | ||
6eae1ace GL |
125 | config GPIO_MPC5200 |
126 | def_bool y | |
127 | depends on PPC_MPC52xx | |
128 | ||
c68308dd WS |
129 | config GPIO_MPC8XXX |
130 | bool "MPC512x/MPC8xxx GPIO support" | |
131 | depends on PPC_MPC512x || PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || \ | |
132 | FSL_SOC_BOOKE || PPC_86xx | |
133 | help | |
134 | Say Y here if you're going to use hardware that connects to the | |
135 | MPC512x/831x/834x/837x/8572/8610 GPIOs. | |
136 | ||
74d10d74 DB |
137 | config GPIO_MSM_V1 |
138 | tristate "Qualcomm MSM GPIO v1" | |
139 | depends on GPIOLIB && ARCH_MSM | |
140 | help | |
141 | Say yes here to support the GPIO interface on ARM v6 based | |
142 | Qualcomm MSM chips. Most of the pins on the MSM can be | |
143 | selected for GPIO, and are controlled by this driver. | |
144 | ||
1a5ab4b3 DB |
145 | config GPIO_MSM_V2 |
146 | tristate "Qualcomm MSM GPIO v2" | |
147 | depends on GPIOLIB && ARCH_MSM | |
148 | help | |
149 | Say yes here to support the GPIO interface on ARM v7 based | |
150 | Qualcomm MSM chips. Most of the pins on the MSM can be | |
151 | selected for GPIO, and are controlled by this driver. | |
152 | ||
d37a65bb SG |
153 | config GPIO_MXC |
154 | def_bool y | |
155 | depends on ARCH_MXC | |
c103de24 | 156 | select GPIO_GENERIC |
e4ea9333 | 157 | select GENERIC_IRQ_CHIP |
c103de24 GL |
158 | |
159 | config GPIO_MXS | |
160 | def_bool y | |
161 | depends on ARCH_MXS | |
06f88a8a | 162 | select GPIO_GENERIC |
498c17cf | 163 | select GENERIC_IRQ_CHIP |
d37a65bb | 164 | |
1e9c2859 BS |
165 | config GPIO_PL061 |
166 | bool "PrimeCell PL061 GPIO support" | |
167 | depends on ARM_AMBA | |
3ab52475 | 168 | select GENERIC_IRQ_CHIP |
1e9c2859 BS |
169 | help |
170 | Say yes here to support the PrimeCell PL061 GPIO device | |
171 | ||
157d2644 HZ |
172 | config GPIO_PXA |
173 | bool "PXA GPIO support" | |
174 | depends on ARCH_PXA || ARCH_MMP | |
175 | help | |
176 | Say yes here to support the PXA GPIO device | |
177 | ||
7b0d44f3 AR |
178 | config GPIO_STA2X11 |
179 | bool "STA2x11/ConneXt GPIO support" | |
180 | depends on MFD_STA2X11 | |
181 | select GENERIC_IRQ_CHIP | |
182 | help | |
183 | Say yes here to support the STA2x11/ConneXt GPIO device. | |
184 | The GPIO module has 128 GPIO pins with alternate functions. | |
185 | ||
0bcb6069 JL |
186 | config GPIO_XILINX |
187 | bool "Xilinx GPIO support" | |
6fa612b5 | 188 | depends on PPC_OF || MICROBLAZE |
0bcb6069 JL |
189 | help |
190 | Say yes here to support the Xilinx FPGA GPIO device | |
191 | ||
27fdd325 YY |
192 | config GPIO_VR41XX |
193 | tristate "NEC VR4100 series General-purpose I/O Uint support" | |
194 | depends on CPU_VR41XX | |
195 | help | |
196 | Say yes here to support the NEC VR4100 series General-purpose I/O Uint | |
197 | ||
be9b06b2 | 198 | config GPIO_SCH |
77820ffa | 199 | tristate "Intel SCH/TunnelCreek/Centerton GPIO" |
6cff9e2b | 200 | depends on PCI && X86 |
860fb8c1 | 201 | select MFD_CORE |
be9b06b2 DT |
202 | select LPC_SCH |
203 | help | |
77820ffa SH |
204 | Say yes here to support GPIO interface on Intel Poulsbo SCH, |
205 | Intel Tunnel Creek processor or Intel Centerton processor. | |
be9b06b2 DT |
206 | The Intel SCH contains a total of 14 GPIO pins. Ten GPIOs are |
207 | powered by the core power rail and are turned off during sleep | |
208 | modes (S3 and higher). The remaining four GPIOs are powered by | |
209 | the Intel SCH suspend power supply. These GPIOs remain | |
210 | active during S3. The suspend powered GPIOs can be used to wake the | |
211 | system from the Suspend-to-RAM state. | |
f04ddfcd DT |
212 | The Intel Tunnel Creek processor has 5 GPIOs powered by the |
213 | core power rail and 9 from suspend power supply. | |
77820ffa SH |
214 | The Intel Centerton processor has a total of 30 GPIO pins. |
215 | Twenty-one are powered by the core power rail and 9 from the | |
216 | suspend power supply. | |
be9b06b2 | 217 | |
6ed9f9c4 PT |
218 | config GPIO_ICH |
219 | tristate "Intel ICH GPIO" | |
220 | depends on PCI && X86 | |
221 | select MFD_CORE | |
222 | select LPC_ICH | |
223 | help | |
224 | Say yes here to support the GPIO functionality of a number of Intel | |
225 | ICH-based chipsets. Currently supported devices: ICH6, ICH7, ICH8 | |
226 | ICH9, ICH10, Series 5/3400 (eg Ibex Peak), Series 6/C200 (eg | |
227 | Cougar Point), NM10 (Tiger Point), and 3100 (Whitmore Lake). | |
228 | ||
229 | If unsure, say N. | |
be9b06b2 | 230 | |
99ea2626 DD |
231 | config GPIO_VX855 |
232 | tristate "VIA VX855/VX875 GPIO" | |
8a0a8e8e | 233 | depends on PCI |
99ea2626 DD |
234 | select MFD_CORE |
235 | select MFD_VX855 | |
236 | help | |
237 | Support access to the VX855/VX875 GPIO lines through the gpio library. | |
238 | ||
239 | This driver provides common support for accessing the device, | |
240 | additional drivers must be enabled in order to use the | |
241 | functionality of the device. | |
242 | ||
6518bb69 MW |
243 | config GPIO_GE_FPGA |
244 | bool "GE FPGA based GPIO" | |
245 | depends on GE_FPGA | |
246 | help | |
247 | Support for common GPIO functionality provided on some GE Single Board | |
248 | Computers. | |
249 | ||
250 | This driver provides basic support (configure as input or output, read | |
251 | and write pin state) for GPIO implemented in a number of GE single | |
252 | board computers. | |
253 | ||
a9c5fff5 DB |
254 | comment "I2C GPIO expanders:" |
255 | ||
e952805d WS |
256 | config GPIO_MAX7300 |
257 | tristate "Maxim MAX7300 GPIO expander" | |
258 | depends on I2C | |
259 | select GPIO_MAX730X | |
260 | help | |
261 | GPIO driver for Maxim MAX7301 I2C-based GPIO expander. | |
262 | ||
bbcd6d54 EM |
263 | config GPIO_MAX732X |
264 | tristate "MAX7319, MAX7320-7327 I2C Port Expanders" | |
265 | depends on I2C | |
266 | help | |
267 | Say yes here to support the MAX7319, MAX7320-7327 series of I2C | |
268 | Port Expanders. Each IO port on these chips has a fixed role of | |
269 | Input (designated by 'I'), Push-Pull Output ('O'), or Open-Drain | |
270 | Input and Output (designed by 'P'). The combinations are listed | |
271 | below: | |
272 | ||
273 | 8 bits: max7319 (8I), max7320 (8O), max7321 (8P), | |
274 | max7322 (4I4O), max7323 (4P4O) | |
275 | ||
276 | 16 bits: max7324 (8I8O), max7325 (8P8O), | |
277 | max7326 (4I12O), max7327 (4P12O) | |
278 | ||
279 | Board setup code must specify the model to use, and the start | |
280 | number for these GPIOs. | |
281 | ||
a80a0bbe MZ |
282 | config GPIO_MAX732X_IRQ |
283 | bool "Interrupt controller support for MAX732x" | |
284 | depends on GPIO_MAX732X=y && GENERIC_HARDIRQS | |
285 | help | |
286 | Say yes here to enable the max732x to be used as an interrupt | |
287 | controller. It requires the driver to be built in the kernel. | |
288 | ||
608589b1 | 289 | config GPIO_MC9S08DZ60 |
290 | bool "MX35 3DS BOARD MC9S08DZ60 GPIO functions" | |
291 | depends on I2C && MACH_MX35_3DS | |
292 | help | |
293 | Select this to enable the MC9S08DZ60 GPIO driver | |
294 | ||
f3dc3630 | 295 | config GPIO_PCA953X |
c29985dd | 296 | tristate "PCA953x, PCA955x, PCA957x, TCA64xx, and MAX7310 I/O ports" |
9e60fdcf | 297 | depends on I2C |
298 | help | |
7059d4b0 DB |
299 | Say yes here to provide access to several register-oriented |
300 | SMBus I/O expanders, made mostly by NXP or TI. Compatible | |
301 | models include: | |
302 | ||
303 | 4 bits: pca9536, pca9537 | |
304 | ||
c29985dd AL |
305 | 8 bits: max7310, max7315, pca6107, pca9534, pca9538, pca9554, |
306 | pca9556, pca9557, pca9574, tca6408 | |
7059d4b0 | 307 | |
c29985dd AL |
308 | 16 bits: max7312, max7313, pca9535, pca9539, pca9555, pca9575, |
309 | tca6416 | |
9e60fdcf | 310 | |
89ea8bbe MZ |
311 | config GPIO_PCA953X_IRQ |
312 | bool "Interrupt controller support for PCA953x" | |
313 | depends on GPIO_PCA953X=y | |
314 | help | |
315 | Say yes here to enable the pca953x to be used as an interrupt | |
316 | controller. It requires the driver to be built in the kernel. | |
317 | ||
15fae37d | 318 | config GPIO_PCF857X |
1673ad52 | 319 | tristate "PCF857x, PCA{85,96}7x, and MAX732[89] I2C GPIO expanders" |
15fae37d DB |
320 | depends on I2C |
321 | help | |
322 | Say yes here to provide access to most "quasi-bidirectional" I2C | |
323 | GPIO expanders used for additional digital outputs or inputs. | |
324 | Most of these parts are from NXP, though TI is a second source for | |
325 | some of them. Compatible models include: | |
326 | ||
327 | 8 bits: pcf8574, pcf8574a, pca8574, pca8574a, | |
1673ad52 DB |
328 | pca9670, pca9672, pca9674, pca9674a, |
329 | max7328, max7329 | |
15fae37d DB |
330 | |
331 | 16 bits: pcf8575, pcf8575c, pca8575, | |
332 | pca9671, pca9673, pca9675 | |
333 | ||
334 | Your board setup code will need to declare the expanders in | |
335 | use, and assign numbers to the GPIOs they expose. Those GPIOs | |
336 | can then be used from drivers and other kernel code, just like | |
337 | other GPIOs, but only accessible from task contexts. | |
338 | ||
339 | This driver provides an in-kernel interface to those GPIOs using | |
340 | platform-neutral GPIO calls. | |
341 | ||
e9fe32bc LD |
342 | config GPIO_RC5T583 |
343 | bool "RICOH RC5T583 GPIO" | |
344 | depends on MFD_RC5T583 | |
345 | help | |
346 | Select this option to enable GPIO driver for the Ricoh RC5T583 | |
347 | chip family. | |
348 | This driver provides the support for driving/reading the gpio pins | |
349 | of RC5T583 device through standard gpio library. | |
350 | ||
c34f16b7 GB |
351 | config GPIO_SX150X |
352 | bool "Semtech SX150x I2C GPIO expander" | |
353 | depends on I2C=y | |
354 | default n | |
355 | help | |
356 | Say yes here to provide support for Semtech SX150-series I2C | |
357 | GPIO expanders. Compatible models include: | |
358 | ||
359 | 8 bits: sx1508q | |
360 | 16 bits: sx1509q | |
361 | ||
03f822f5 RV |
362 | config GPIO_STMPE |
363 | bool "STMPE GPIOs" | |
364 | depends on MFD_STMPE | |
365 | help | |
366 | This enables support for the GPIOs found on the STMPE I/O | |
367 | Expanders. | |
368 | ||
5238f7bc JC |
369 | config GPIO_STP_XWAY |
370 | bool "XWAY STP GPIOs" | |
371 | depends on SOC_XWAY | |
372 | help | |
373 | This enables support for the Serial To Parallel (STP) unit found on | |
374 | XWAY SoC. The STP allows the SoC to drive a shift registers cascade, | |
375 | that can be up to 24 bit. This peripheral is aimed at driving leds. | |
376 | Some of the gpios/leds can be auto updated by the soc with dsl and | |
377 | phy status. | |
378 | ||
f4e8afdc SI |
379 | config GPIO_TC3589X |
380 | bool "TC3589X GPIOs" | |
381 | depends on MFD_TC3589X | |
d88b25be | 382 | help |
f4e8afdc | 383 | This enables support for the GPIOs found on the TC3589X |
d88b25be RV |
384 | I/O Expander. |
385 | ||
668a6cc7 MO |
386 | config GPIO_TPS65912 |
387 | tristate "TI TPS65912 GPIO" | |
388 | depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI) | |
389 | help | |
390 | This driver supports TPS65912 gpio chip | |
391 | ||
e9d35947 DB |
392 | config GPIO_TWL4030 |
393 | tristate "TWL4030, TWL5030, and TPS659x0 GPIOs" | |
394 | depends on TWL4030_CORE | |
395 | help | |
396 | Say yes here to access the GPIO signals of various multi-function | |
397 | power management chips from Texas Instruments. | |
398 | ||
e4b736f1 MB |
399 | config GPIO_WM831X |
400 | tristate "WM831x GPIOs" | |
401 | depends on MFD_WM831X | |
402 | help | |
403 | Say yes here to access the GPIO signals of WM831x power management | |
404 | chips from Wolfson Microelectronics. | |
405 | ||
38f6ce45 MB |
406 | config GPIO_WM8350 |
407 | tristate "WM8350 GPIOs" | |
408 | depends on MFD_WM8350 | |
409 | help | |
410 | Say yes here to access the GPIO signals of WM8350 power management | |
411 | chips from Wolfson Microelectronics. | |
412 | ||
2955c309 MB |
413 | config GPIO_WM8994 |
414 | tristate "WM8994 GPIOs" | |
415 | depends on MFD_WM8994 | |
416 | help | |
417 | Say yes here to access the GPIO signals of WM8994 audio hub | |
418 | CODECs from Wolfson Microelectronics. | |
419 | ||
ef72af40 MH |
420 | config GPIO_ADP5520 |
421 | tristate "GPIO Support for ADP5520 PMIC" | |
422 | depends on PMIC_ADP5520 | |
423 | help | |
424 | This option enables support for on-chip GPIO found | |
425 | on Analog Devices ADP5520 PMICs. | |
426 | ||
80884094 MH |
427 | config GPIO_ADP5588 |
428 | tristate "ADP5588 I2C GPIO expander" | |
429 | depends on I2C | |
430 | help | |
431 | This option enables support for 18 GPIOs found | |
432 | on Analog Devices ADP5588 GPIO Expanders. | |
80884094 | 433 | |
459773ae MH |
434 | config GPIO_ADP5588_IRQ |
435 | bool "Interrupt controller support for ADP5588" | |
436 | depends on GPIO_ADP5588=y | |
437 | help | |
438 | Say yes here to enable the adp5588 to be used as an interrupt | |
439 | controller. It requires the driver to be built in the kernel. | |
440 | ||
ff1d5c2f MB |
441 | comment "PCI GPIO expanders:" |
442 | ||
5f0a96b0 AS |
443 | config GPIO_CS5535 |
444 | tristate "AMD CS5535/CS5536 GPIO support" | |
babf000e | 445 | depends on PCI && X86 && MFD_CS5535 |
5f0a96b0 AS |
446 | help |
447 | The AMD CS5535 and CS5536 southbridges support 28 GPIO pins that | |
448 | can be used for quite a number of things. The CS5535/6 is found on | |
449 | AMD Geode and Lemote Yeeloong devices. | |
450 | ||
451 | If unsure, say N. | |
452 | ||
ff1d5c2f MB |
453 | config GPIO_BT8XX |
454 | tristate "BT8XX GPIO abuser" | |
455 | depends on PCI && VIDEO_BT848=n | |
456 | help | |
457 | The BT8xx frame grabber chip has 24 GPIO pins than can be abused | |
458 | as a cheap PCI GPIO card. | |
459 | ||
460 | This chip can be found on Miro, Hauppauge and STB TV-cards. | |
461 | ||
462 | The card needs to be physically altered for using it as a | |
463 | GPIO card. For more information on how to build a GPIO card | |
464 | from a BT8xx TV card, see the documentation file at | |
465 | Documentation/bt8xxgpio.txt | |
466 | ||
467 | If unsure, say N. | |
468 | ||
8bf02617 | 469 | config GPIO_LANGWELL |
8081c84c | 470 | bool "Intel Langwell/Penwell GPIO support" |
61ab3fe5 | 471 | depends on PCI && X86 |
465f2bd4 | 472 | select IRQ_DOMAIN |
8bf02617 | 473 | help |
8081c84c | 474 | Say Y here to support Intel Langwell/Penwell GPIO. |
8bf02617 | 475 | |
04c17aa8 | 476 | config GPIO_PCH |
868fea05 | 477 | tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7223/ML7831) GPIO" |
61ab3fe5 | 478 | depends on PCI && X86 |
38eb18a6 | 479 | select GENERIC_IRQ_CHIP |
04c17aa8 TM |
480 | help |
481 | This driver is for PCH(Platform controller Hub) GPIO of Intel Topcliff | |
482 | which is an IOH(Input/Output Hub) for x86 embedded processor. | |
483 | This driver can access PCH GPIO device. | |
484 | ||
868fea05 TM |
485 | This driver also can be used for LAPIS Semiconductor IOH(Input/ |
486 | Output Hub), ML7223 and ML7831. | |
bc786cce | 487 | ML7223 IOH is for MP(Media Phone) use. |
868fea05 TM |
488 | ML7831 IOH is for general purpose use. |
489 | ML7223/ML7831 is companion chip for Intel Atom E6xx series. | |
490 | ML7223/ML7831 is completely compatible for Intel EG20T PCH. | |
bc786cce | 491 | |
49a36793 TM |
492 | config GPIO_ML_IOH |
493 | tristate "OKI SEMICONDUCTOR ML7213 IOH GPIO support" | |
494 | depends on PCI | |
54be5663 | 495 | select GENERIC_IRQ_CHIP |
49a36793 TM |
496 | help |
497 | ML7213 is companion chip for Intel Atom E6xx series. | |
498 | This driver can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/Output | |
499 | Hub) which is for IVI(In-Vehicle Infotainment) use. | |
500 | This driver can access the IOH's GPIO device. | |
501 | ||
b43ab901 SAS |
502 | config GPIO_SODAVILLE |
503 | bool "Intel Sodaville GPIO support" | |
3ffc9ceb | 504 | depends on X86 && PCI && OF |
b43ab901 SAS |
505 | select GPIO_GENERIC |
506 | select GENERIC_IRQ_CHIP | |
507 | help | |
508 | Say Y here to support Intel Sodaville GPIO. | |
509 | ||
35570ac6 RR |
510 | config GPIO_TIMBERDALE |
511 | bool "Support for timberdale GPIO IP" | |
6cff9e2b | 512 | depends on MFD_TIMBERDALE && HAS_IOMEM |
35570ac6 RR |
513 | ---help--- |
514 | Add support for the GPIO IP in the timberdale FPGA. | |
515 | ||
9956d02d FF |
516 | config GPIO_RDC321X |
517 | tristate "RDC R-321x GPIO support" | |
6cff9e2b | 518 | depends on PCI |
e4be3cb7 | 519 | select MFD_CORE |
9956d02d FF |
520 | select MFD_RDC321X |
521 | help | |
522 | Support for the RDC R321x SoC GPIOs over southbridge | |
523 | PCI configuration space. | |
524 | ||
a9c5fff5 DB |
525 | comment "SPI GPIO expanders:" |
526 | ||
0c36ec31 JB |
527 | config GPIO_MAX7301 |
528 | tristate "Maxim MAX7301 GPIO expander" | |
529 | depends on SPI_MASTER | |
e952805d | 530 | select GPIO_MAX730X |
0c36ec31 | 531 | help |
e952805d | 532 | GPIO driver for Maxim MAX7301 SPI-based GPIO expander. |
0c36ec31 | 533 | |
e58b9e27 | 534 | config GPIO_MCP23S08 |
752ad5e8 PK |
535 | tristate "Microchip MCP23xxx I/O expander" |
536 | depends on SPI_MASTER || I2C | |
e58b9e27 | 537 | help |
752ad5e8 PK |
538 | SPI/I2C driver for Microchip MCP23S08/MCP23S17/MCP23008/MCP23017 |
539 | I/O expanders. | |
0b7bb77f | 540 | This provides a GPIO interface supporting inputs and outputs. |
e58b9e27 | 541 | |
1e5db006 RR |
542 | config GPIO_MC33880 |
543 | tristate "Freescale MC33880 high-side/low-side switch" | |
544 | depends on SPI_MASTER | |
545 | help | |
546 | SPI driver for Freescale MC33880 high-side/low-side switch. | |
547 | This provides GPIO interface supporting inputs and outputs. | |
548 | ||
ead6db08 MG |
549 | config GPIO_74X164 |
550 | tristate "74x164 serial-in/parallel-out 8-bits shift register" | |
551 | depends on SPI_MASTER | |
552 | help | |
553 | Platform driver for 74x164 compatible serial-in/parallel-out | |
554 | 8-outputs shift registers. This driver can be used to provide access | |
555 | to more gpio outputs. | |
556 | ||
4cf8e53b MV |
557 | comment "AC97 GPIO expanders:" |
558 | ||
559 | config GPIO_UCB1400 | |
560 | bool "Philips UCB1400 GPIO" | |
561 | depends on UCB1400_CORE | |
562 | help | |
563 | This enables support for the Philips UCB1400 GPIO pins. | |
564 | The UCB1400 is an AC97 audio codec. | |
565 | ||
800e69fb IS |
566 | comment "MODULbus GPIO expanders:" |
567 | ||
568 | config GPIO_JANZ_TTL | |
569 | tristate "Janz VMOD-TTL Digital IO Module" | |
570 | depends on MFD_JANZ_CMODIO | |
571 | help | |
572 | This enables support for the Janz VMOD-TTL Digital IO module. | |
573 | This driver provides support for driving the pins in output | |
574 | mode only. Input mode is not supported. | |
575 | ||
c103de24 | 576 | config GPIO_AB8500 |
0cb3fcd7 | 577 | bool "ST-Ericsson AB8500 Mixed Signal Circuit gpio functions" |
9ad198cb | 578 | depends on AB8500_CORE && BROKEN |
0cb3fcd7 BB |
579 | help |
580 | Select this to enable the AB8500 IC GPIO driver | |
83545d83 JEC |
581 | |
582 | config GPIO_TPS65910 | |
583 | bool "TPS65910 GPIO" | |
584 | depends on MFD_TPS65910 | |
585 | help | |
586 | Select this option to enable GPIO driver for the TPS65910 | |
587 | chip family. | |
25cf2507 MN |
588 | |
589 | config GPIO_MSIC | |
590 | bool "Intel MSIC mixed signal gpio support" | |
591 | depends on MFD_INTEL_MSIC | |
592 | help | |
593 | Enable support for GPIO on intel MSIC controllers found in | |
594 | intel MID devices | |
595 | ||
7444a72e | 596 | endif |