Commit | Line | Data |
---|---|---|
a9c5fff5 | 1 | # |
e849dc04 | 2 | # GPIO infrastructure and drivers |
a9c5fff5 DB |
3 | # |
4 | ||
7563bbf8 MB |
5 | config ARCH_HAVE_CUSTOM_GPIO_H |
6 | bool | |
7 | help | |
8 | Selecting this config option from the architecture Kconfig allows | |
9 | the architecture to provide a custom asm/gpio.h implementation | |
10 | overriding the default implementations. New uses of this are | |
11 | strongly discouraged. | |
12 | ||
7444a72e | 13 | config ARCH_WANT_OPTIONAL_GPIOLIB |
a9c5fff5 | 14 | bool |
7444a72e MB |
15 | help |
16 | Select this config option from the architecture Kconfig, if | |
17 | it is possible to use gpiolib on the architecture, but let the | |
18 | user decide whether to actually build it or not. | |
19 | Select this instead of ARCH_REQUIRE_GPIOLIB, if your architecture does | |
20 | not depend on GPIOs being available, but rather let the user | |
21 | decide whether he needs it or not. | |
22 | ||
23 | config ARCH_REQUIRE_GPIOLIB | |
24 | bool | |
25 | select GPIOLIB | |
a9c5fff5 DB |
26 | help |
27 | Platforms select gpiolib if they use this infrastructure | |
28 | for all their GPIOs, usually starting with ones integrated | |
29 | into SOC processors. | |
7444a72e MB |
30 | Selecting this from the architecture code will cause the gpiolib |
31 | code to always get built in. | |
32 | ||
7444a72e MB |
33 | |
34 | menuconfig GPIOLIB | |
35 | bool "GPIO Support" | |
36 | depends on ARCH_WANT_OPTIONAL_GPIOLIB || ARCH_REQUIRE_GPIOLIB | |
7444a72e MB |
37 | help |
38 | This enables GPIO support through the generic GPIO library. | |
39 | You only need to enable this, if you also want to enable | |
e849dc04 | 40 | one or more of the GPIO drivers below. |
7444a72e MB |
41 | |
42 | If unsure, say N. | |
a9c5fff5 | 43 | |
7444a72e | 44 | if GPIOLIB |
a9c5fff5 | 45 | |
b69ac524 AC |
46 | config GPIO_DEVRES |
47 | def_bool y | |
48 | depends on HAS_IOMEM | |
49 | ||
f141ed65 GL |
50 | config OF_GPIO |
51 | def_bool y | |
afe760e4 | 52 | depends on OF |
f141ed65 | 53 | |
e29482e8 MN |
54 | config GPIO_ACPI |
55 | def_bool y | |
56 | depends on ACPI | |
57 | ||
14250520 | 58 | config GPIOLIB_IRQCHIP |
fc346270 | 59 | select IRQ_DOMAIN |
14250520 LW |
60 | bool |
61 | ||
a9c5fff5 DB |
62 | config DEBUG_GPIO |
63 | bool "Debug GPIO calls" | |
64 | depends on DEBUG_KERNEL | |
65 | help | |
66 | Say Y here to add some extra checks and diagnostics to GPIO calls. | |
692105b8 ML |
67 | These checks help ensure that GPIOs have been properly initialized |
68 | before they are used, and that sleeping calls are not made from | |
69 | non-sleeping contexts. They can make bitbanged serial protocols | |
a9c5fff5 DB |
70 | slower. The diagnostics help catch the type of setup errors |
71 | that are most common when setting up new platforms or boards. | |
72 | ||
d8f388d8 DB |
73 | config GPIO_SYSFS |
74 | bool "/sys/class/gpio/... (sysfs interface)" | |
4c0ea233 | 75 | depends on SYSFS |
d8f388d8 DB |
76 | help |
77 | Say Y here to add a sysfs interface for GPIOs. | |
78 | ||
79 | This is mostly useful to work around omissions in a system's | |
80 | kernel support. Those are common in custom and semicustom | |
81 | hardware assembled using standard kernels with a minimum of | |
82 | custom patches. In those cases, userspace code may import | |
83 | a given GPIO from the kernel, if no kernel driver requested it. | |
84 | ||
85 | Kernel drivers may also request that a particular GPIO be | |
86 | exported to userspace; this can be useful when debugging. | |
87 | ||
c103de24 GL |
88 | config GPIO_GENERIC |
89 | tristate | |
90 | ||
e849dc04 | 91 | # put drivers in the right section, in alphabetical order |
a9c5fff5 | 92 | |
07bfc915 | 93 | config GPIO_DA9052 |
94 | tristate "Dialog DA9052 GPIO" | |
1c4fe3aa | 95 | depends on PMIC_DA9052 |
07bfc915 | 96 | help |
97 | Say yes here to enable the GPIO driver for the DA9052 chip. | |
98 | ||
04ed4279 AJ |
99 | config GPIO_DA9055 |
100 | tristate "Dialog Semiconductor DA9055 GPIO" | |
101 | depends on MFD_DA9055 | |
102 | help | |
103 | Say yes here to enable the GPIO driver for the DA9055 chip. | |
104 | ||
105 | The Dialog DA9055 PMIC chip has 3 GPIO pins that can be | |
106 | be controller by this driver. | |
107 | ||
108 | If driver is built as a module it will be called gpio-da9055. | |
109 | ||
e952805d WS |
110 | config GPIO_MAX730X |
111 | tristate | |
112 | ||
e849dc04 | 113 | comment "Memory mapped GPIO drivers:" |
0bcb6069 | 114 | |
af0a33e2 AS |
115 | config GPIO_74XX_MMIO |
116 | tristate "GPIO driver for 74xx-ICs with MMIO access" | |
117 | depends on OF_GPIO | |
118 | select GPIO_GENERIC | |
119 | help | |
120 | Say yes here to support GPIO functionality for 74xx-compatible ICs | |
121 | with MMIO access. Compatible models include: | |
122 | 1 bit: 741G125 (Input), 741G74 (Output) | |
123 | 2 bits: 742G125 (Input), 7474 (Output) | |
124 | 4 bits: 74125 (Input), 74175 (Output) | |
125 | 6 bits: 74365 (Input), 74174 (Output) | |
126 | 8 bits: 74244 (Input), 74273 (Output) | |
127 | 16 bits: 741624 (Input), 7416374 (Output) | |
128 | ||
a3b8d4a5 | 129 | config GPIO_CLPS711X |
55fe14ab | 130 | tristate "CLPS711X GPIO support" |
ffd4bf1a | 131 | depends on ARCH_CLPS711X || COMPILE_TEST |
55fe14ab AS |
132 | select GPIO_GENERIC |
133 | help | |
134 | Say yes here to support GPIO on CLPS711X SoCs. | |
a3b8d4a5 | 135 | |
ee89cf63 GS |
136 | config GPIO_DAVINCI |
137 | bool "TI Davinci/Keystone GPIO support" | |
138 | default y if ARCH_DAVINCI | |
139 | depends on ARM && (ARCH_DAVINCI || ARCH_KEYSTONE) | |
140 | help | |
141 | Say yes here to enable GPIO support for TI Davinci/Keystone SoCs. | |
142 | ||
c103de24 GL |
143 | config GPIO_GENERIC_PLATFORM |
144 | tristate "Generic memory-mapped GPIO controller support (MMIO platform device)" | |
145 | select GPIO_GENERIC | |
aeec56e3 | 146 | help |
c103de24 | 147 | Say yes here to support basic platform_device memory-mapped GPIO controllers. |
aeec56e3 | 148 | |
7779b345 JI |
149 | config GPIO_DWAPB |
150 | tristate "Synopsys DesignWare APB GPIO driver" | |
1972c97d LW |
151 | depends on ARM |
152 | depends on OF_GPIO | |
7779b345 JI |
153 | select GPIO_GENERIC |
154 | select GENERIC_IRQ_CHIP | |
7779b345 JI |
155 | help |
156 | Say Y or M here to build support for the Synopsys DesignWare APB | |
157 | GPIO block. | |
158 | ||
9cc0cb3c DT |
159 | config GPIO_IT8761E |
160 | tristate "IT8761E GPIO support" | |
265fe02b | 161 | depends on X86 # unconditional access to IO space. |
9cc0cb3c DT |
162 | help |
163 | Say yes here to support GPIO functionality of IT8761E super I/O chip. | |
164 | ||
a07e103e MD |
165 | config GPIO_EM |
166 | tristate "Emma Mobile GPIO" | |
b5927854 | 167 | depends on ARM && OF_GPIO |
a07e103e MD |
168 | help |
169 | Say yes here to support GPIO on Renesas Emma Mobile SoCs. | |
170 | ||
c6b52c13 HS |
171 | config GPIO_EP93XX |
172 | def_bool y | |
173 | depends on ARCH_EP93XX | |
1e4c8842 | 174 | select GPIO_GENERIC |
c6b52c13 | 175 | |
9af4d80b FV |
176 | config GPIO_ZEVIO |
177 | bool "LSI ZEVIO SoC memory mapped GPIOs" | |
feabf0cd | 178 | depends on ARM && OF_GPIO |
9af4d80b FV |
179 | help |
180 | Say yes here to support the GPIO controller in LSI ZEVIO SoCs. | |
181 | ||
5238f7bc JC |
182 | config GPIO_MM_LANTIQ |
183 | bool "Lantiq Memory mapped GPIOs" | |
184 | depends on LANTIQ && SOC_XWAY | |
185 | help | |
186 | This enables support for memory mapped GPIOs on the External Bus Unit | |
187 | (EBU) found on Lantiq SoCs. The gpios are output only as they are | |
188 | created by attaching a 16bit latch to the bus. | |
189 | ||
6c17aa01 SG |
190 | config GPIO_F7188X |
191 | tristate "F71882FG and F71889F GPIO support" | |
192 | depends on X86 | |
193 | help | |
194 | This option enables support for GPIOs found on Fintek Super-I/O | |
195 | chips F71882FG and F71889F. | |
196 | ||
197 | To compile this driver as a module, choose M here: the module will | |
198 | be called f7188x-gpio. | |
199 | ||
0299b77b JJ |
200 | config GPIO_MOXART |
201 | bool "MOXART GPIO support" | |
202 | depends on ARCH_MOXART | |
3c01b9a8 | 203 | select GPIO_GENERIC |
0299b77b JJ |
204 | help |
205 | Select this option to enable GPIO driver for | |
206 | MOXA ART SoC devices. | |
207 | ||
6eae1ace GL |
208 | config GPIO_MPC5200 |
209 | def_bool y | |
210 | depends on PPC_MPC52xx | |
211 | ||
c68308dd WS |
212 | config GPIO_MPC8XXX |
213 | bool "MPC512x/MPC8xxx GPIO support" | |
214 | depends on PPC_MPC512x || PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || \ | |
215 | FSL_SOC_BOOKE || PPC_86xx | |
216 | help | |
217 | Say Y here if you're going to use hardware that connects to the | |
218 | MPC512x/831x/834x/837x/8572/8610 GPIOs. | |
219 | ||
74d10d74 DB |
220 | config GPIO_MSM_V1 |
221 | tristate "Qualcomm MSM GPIO v1" | |
afcc0f8c | 222 | depends on GPIOLIB && ARCH_MSM && (ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50) |
74d10d74 DB |
223 | help |
224 | Say yes here to support the GPIO interface on ARM v6 based | |
225 | Qualcomm MSM chips. Most of the pins on the MSM can be | |
226 | selected for GPIO, and are controlled by this driver. | |
227 | ||
1a5ab4b3 DB |
228 | config GPIO_MSM_V2 |
229 | tristate "Qualcomm MSM GPIO v2" | |
add798a4 | 230 | depends on GPIOLIB && OF && ARCH_QCOM |
1a5ab4b3 DB |
231 | help |
232 | Say yes here to support the GPIO interface on ARM v7 based | |
233 | Qualcomm MSM chips. Most of the pins on the MSM can be | |
234 | selected for GPIO, and are controlled by this driver. | |
235 | ||
fefe7b09 TP |
236 | config GPIO_MVEBU |
237 | def_bool y | |
49e928d6 | 238 | depends on PLAT_ORION |
bc1008cf | 239 | depends on OF |
fefe7b09 TP |
240 | select GPIO_GENERIC |
241 | select GENERIC_IRQ_CHIP | |
242 | ||
d37a65bb SG |
243 | config GPIO_MXC |
244 | def_bool y | |
245 | depends on ARCH_MXC | |
c103de24 | 246 | select GPIO_GENERIC |
e4ea9333 | 247 | select GENERIC_IRQ_CHIP |
c103de24 GL |
248 | |
249 | config GPIO_MXS | |
250 | def_bool y | |
251 | depends on ARCH_MXS | |
06f88a8a | 252 | select GPIO_GENERIC |
498c17cf | 253 | select GENERIC_IRQ_CHIP |
d37a65bb | 254 | |
aca58a66 DD |
255 | config GPIO_OCTEON |
256 | tristate "Cavium OCTEON GPIO" | |
257 | depends on GPIOLIB && CAVIUM_OCTEON_SOC | |
258 | default y | |
259 | help | |
260 | Say yes here to support the on-chip GPIO lines on the OCTEON | |
261 | family of SOCs. | |
262 | ||
cd0a3748 | 263 | config GPIO_OMAP |
9d5d96ef | 264 | bool "TI OMAP GPIO support" if COMPILE_TEST && !ARCH_OMAP2PLUS |
cd0a3748 | 265 | default y if ARCH_OMAP |
9d5d96ef AB |
266 | depends on ARM |
267 | select GENERIC_IRQ_CHIP | |
fb655f57 | 268 | select GPIOLIB_IRQCHIP |
cd0a3748 JMC |
269 | help |
270 | Say yes here to enable GPIO support for TI OMAP SoCs. | |
271 | ||
1e9c2859 BS |
272 | config GPIO_PL061 |
273 | bool "PrimeCell PL061 GPIO support" | |
8a242842 | 274 | depends on ARM_AMBA |
a5d6d271 | 275 | select IRQ_DOMAIN |
8d5b24bd | 276 | select GPIOLIB_IRQCHIP |
1e9c2859 BS |
277 | help |
278 | Say yes here to support the PrimeCell PL061 GPIO device | |
279 | ||
157d2644 HZ |
280 | config GPIO_PXA |
281 | bool "PXA GPIO support" | |
282 | depends on ARCH_PXA || ARCH_MMP | |
283 | help | |
284 | Say yes here to support the PXA GPIO device | |
285 | ||
119f5e44 MD |
286 | config GPIO_RCAR |
287 | tristate "Renesas R-Car GPIO" | |
821e85f2 | 288 | depends on ARM && (ARCH_SHMOBILE || COMPILE_TEST) |
c7f3c5d3 | 289 | select GPIOLIB_IRQCHIP |
119f5e44 MD |
290 | help |
291 | Say yes here to support GPIO on Renesas R-Car SoCs. | |
292 | ||
880cf071 TF |
293 | config GPIO_SAMSUNG |
294 | bool | |
295 | depends on PLAT_SAMSUNG | |
296 | help | |
297 | Legacy GPIO support. Use only for platforms without support for | |
298 | pinctrl. | |
299 | ||
12262bef BR |
300 | config GPIO_SCH311X |
301 | tristate "SMSC SCH311x SuperI/O GPIO" | |
302 | help | |
303 | Driver to enable the GPIOs found on SMSC SMSC SCH3112, SCH3114 and | |
304 | SCH3116 "Super I/O" chipsets. | |
305 | ||
306 | To compile this driver as a module, choose M here: the module will | |
307 | be called gpio-sch311x. | |
308 | ||
b53bc281 SH |
309 | config GPIO_SPEAR_SPICS |
310 | bool "ST SPEAr13xx SPI Chip Select as GPIO support" | |
311 | depends on PLAT_SPEAR | |
312 | select GENERIC_IRQ_CHIP | |
313 | help | |
314 | Say yes here to support ST SPEAr SPI Chip Select as GPIO device | |
315 | ||
7b0d44f3 AR |
316 | config GPIO_STA2X11 |
317 | bool "STA2x11/ConneXt GPIO support" | |
318 | depends on MFD_STA2X11 | |
319 | select GENERIC_IRQ_CHIP | |
320 | help | |
321 | Say yes here to support the STA2x11/ConneXt GPIO device. | |
322 | The GPIO module has 128 GPIO pins with alternate functions. | |
323 | ||
6a8a0c1d AS |
324 | config GPIO_SYSCON |
325 | tristate "GPIO based on SYSCON" | |
326 | depends on MFD_SYSCON && OF | |
327 | help | |
328 | Say yes here to support GPIO functionality though SYSCON driver. | |
329 | ||
759f5f37 VD |
330 | config GPIO_TS5500 |
331 | tristate "TS-5500 DIO blocks and compatibles" | |
f29b9d13 | 332 | depends on TS5500 || COMPILE_TEST |
759f5f37 VD |
333 | help |
334 | This driver supports Digital I/O exposed by pin blocks found on some | |
335 | Technologic Systems platforms. It includes, but is not limited to, 3 | |
336 | blocks of the TS-5500: DIO1, DIO2 and the LCD port, and the TS-5600 | |
337 | LCD port. | |
338 | ||
9caf1f22 JH |
339 | config GPIO_TZ1090 |
340 | bool "Toumaz Xenif TZ1090 GPIO support" | |
341 | depends on SOC_TZ1090 | |
04777396 | 342 | select GENERIC_IRQ_CHIP |
9caf1f22 JH |
343 | default y |
344 | help | |
345 | Say yes here to support Toumaz Xenif TZ1090 GPIOs. | |
346 | ||
79bb6460 JH |
347 | config GPIO_TZ1090_PDC |
348 | bool "Toumaz Xenif TZ1090 PDC GPIO support" | |
349 | depends on SOC_TZ1090 | |
350 | default y | |
351 | help | |
352 | Say yes here to support Toumaz Xenif TZ1090 PDC GPIOs. | |
353 | ||
7f2691a1 SA |
354 | config GPIO_VF610 |
355 | def_bool y | |
356 | depends on ARCH_MXC && SOC_VF610 | |
357 | select GPIOLIB_IRQCHIP | |
358 | help | |
359 | Say yes here to support Vybrid vf610 GPIOs. | |
360 | ||
29cbf458 FK |
361 | config GPIO_XGENE |
362 | bool "APM X-Gene GPIO controller support" | |
363 | depends on ARM64 && OF_GPIO | |
364 | help | |
365 | This driver is to support the GPIO block within the APM X-Gene SoC | |
366 | platform's generic flash controller. The GPIO pins are muxed with | |
367 | the generic flash controller's address and data pins. Say yes | |
368 | here to enable the GFC GPIO functionality. | |
369 | ||
0bcb6069 | 370 | config GPIO_XILINX |
c54c58ba RRD |
371 | tristate "Xilinx GPIO support" |
372 | depends on OF_GPIO && (PPC_OF || MICROBLAZE || ARCH_ZYNQ || ARCH_X86) | |
0bcb6069 JL |
373 | help |
374 | Say yes here to support the Xilinx FPGA GPIO device | |
375 | ||
3242ba11 HK |
376 | config GPIO_ZYNQ |
377 | tristate "Xilinx Zynq GPIO support" | |
378 | depends on ARCH_ZYNQ | |
379 | select GPIOLIB_IRQCHIP | |
380 | help | |
381 | Say yes here to support Xilinx Zynq GPIO controller. | |
382 | ||
3b31d0ec BS |
383 | config GPIO_XTENSA |
384 | bool "Xtensa GPIO32 support" | |
385 | depends on XTENSA | |
a1a2bdec | 386 | depends on HAVE_XTENSA_GPIO32 |
3b31d0ec BS |
387 | depends on !SMP |
388 | help | |
389 | Say yes here to support the Xtensa internal GPIO32 IMPWIRE (input) | |
390 | and EXPSTATE (output) ports | |
391 | ||
27fdd325 YY |
392 | config GPIO_VR41XX |
393 | tristate "NEC VR4100 series General-purpose I/O Uint support" | |
394 | depends on CPU_VR41XX | |
395 | help | |
396 | Say yes here to support the NEC VR4100 series General-purpose I/O Uint | |
397 | ||
be9b06b2 | 398 | config GPIO_SCH |
92021490 | 399 | tristate "Intel SCH/TunnelCreek/Centerton/Quark X1000 GPIO" |
6cff9e2b | 400 | depends on PCI && X86 |
860fb8c1 | 401 | select MFD_CORE |
be9b06b2 DT |
402 | select LPC_SCH |
403 | help | |
77820ffa | 404 | Say yes here to support GPIO interface on Intel Poulsbo SCH, |
92021490 CRSF |
405 | Intel Tunnel Creek processor, Intel Centerton processor or |
406 | Intel Quark X1000 SoC. | |
407 | ||
be9b06b2 DT |
408 | The Intel SCH contains a total of 14 GPIO pins. Ten GPIOs are |
409 | powered by the core power rail and are turned off during sleep | |
410 | modes (S3 and higher). The remaining four GPIOs are powered by | |
411 | the Intel SCH suspend power supply. These GPIOs remain | |
412 | active during S3. The suspend powered GPIOs can be used to wake the | |
413 | system from the Suspend-to-RAM state. | |
92021490 | 414 | |
f04ddfcd DT |
415 | The Intel Tunnel Creek processor has 5 GPIOs powered by the |
416 | core power rail and 9 from suspend power supply. | |
92021490 | 417 | |
77820ffa SH |
418 | The Intel Centerton processor has a total of 30 GPIO pins. |
419 | Twenty-one are powered by the core power rail and 9 from the | |
420 | suspend power supply. | |
be9b06b2 | 421 | |
92021490 CRSF |
422 | The Intel Quark X1000 SoC has 2 GPIOs powered by the core |
423 | power well and 6 from the suspend power well. | |
424 | ||
6ed9f9c4 PT |
425 | config GPIO_ICH |
426 | tristate "Intel ICH GPIO" | |
427 | depends on PCI && X86 | |
428 | select MFD_CORE | |
429 | select LPC_ICH | |
430 | help | |
431 | Say yes here to support the GPIO functionality of a number of Intel | |
432 | ICH-based chipsets. Currently supported devices: ICH6, ICH7, ICH8 | |
433 | ICH9, ICH10, Series 5/3400 (eg Ibex Peak), Series 6/C200 (eg | |
434 | Cougar Point), NM10 (Tiger Point), and 3100 (Whitmore Lake). | |
435 | ||
436 | If unsure, say N. | |
be9b06b2 | 437 | |
e9004f50 LW |
438 | config GPIO_IOP |
439 | tristate "Intel IOP GPIO" | |
440 | depends on ARM && (ARCH_IOP32X || ARCH_IOP33X) | |
441 | help | |
442 | Say yes here to support the GPIO functionality of a number of Intel | |
443 | IOP32X or IOP33X. | |
444 | ||
445 | If unsure, say N. | |
be9b06b2 | 446 | |
99ea2626 DD |
447 | config GPIO_VX855 |
448 | tristate "VIA VX855/VX875 GPIO" | |
0244ad00 | 449 | depends on PCI |
99ea2626 DD |
450 | select MFD_CORE |
451 | select MFD_VX855 | |
452 | help | |
453 | Support access to the VX855/VX875 GPIO lines through the gpio library. | |
454 | ||
455 | This driver provides common support for accessing the device, | |
456 | additional drivers must be enabled in order to use the | |
457 | functionality of the device. | |
458 | ||
6518bb69 MW |
459 | config GPIO_GE_FPGA |
460 | bool "GE FPGA based GPIO" | |
461 | depends on GE_FPGA | |
462 | help | |
463 | Support for common GPIO functionality provided on some GE Single Board | |
464 | Computers. | |
465 | ||
466 | This driver provides basic support (configure as input or output, read | |
467 | and write pin state) for GPIO implemented in a number of GE single | |
468 | board computers. | |
469 | ||
1d09aaa6 | 470 | config GPIO_LYNXPOINT |
d463c6ff | 471 | tristate "Intel Lynxpoint GPIO support" |
977d16b8 | 472 | depends on ACPI && X86 |
7f87210e | 473 | select GPIOLIB_IRQCHIP |
1d09aaa6 MN |
474 | help |
475 | driver for GPIO functionality on Intel Lynxpoint PCH chipset | |
476 | Requires ACPI device enumeration code to set up a platform device. | |
477 | ||
ddb27f3b AL |
478 | config GPIO_GRGPIO |
479 | tristate "Aeroflex Gaisler GRGPIO support" | |
480 | depends on OF | |
481 | select GPIO_GENERIC | |
482 | select IRQ_DOMAIN | |
483 | help | |
484 | Select this to support Aeroflex Gaisler GRGPIO cores from the GRLIB | |
485 | VHDL IP core library. | |
486 | ||
c6ce2b6b CR |
487 | config GPIO_TB10X |
488 | bool | |
90d16a43 | 489 | select GENERIC_IRQ_CHIP |
c6ce2b6b CR |
490 | select OF_GPIO |
491 | ||
a9c5fff5 DB |
492 | comment "I2C GPIO expanders:" |
493 | ||
31ba56f2 MB |
494 | config GPIO_ARIZONA |
495 | tristate "Wolfson Microelectronics Arizona class devices" | |
496 | depends on MFD_ARIZONA | |
497 | help | |
498 | Support for GPIOs on Wolfson Arizona class devices. | |
499 | ||
104fb1d5 ZL |
500 | config GPIO_CRYSTAL_COVE |
501 | tristate "GPIO support for Crystal Cove PMIC" | |
502 | depends on INTEL_SOC_PMIC | |
503 | select GPIOLIB_IRQCHIP | |
504 | help | |
505 | Support for GPIO pins on Crystal Cove PMIC. | |
506 | ||
507 | Say Yes if you have a Intel SoC based tablet with Crystal Cove PMIC | |
508 | inside. | |
509 | ||
510 | This driver can also be built as a module. If so, the module will be | |
511 | called gpio-crystalcove. | |
512 | ||
0cc59b9d MK |
513 | config GPIO_LP3943 |
514 | tristate "TI/National Semiconductor LP3943 GPIO expander" | |
515 | depends on MFD_LP3943 | |
516 | help | |
517 | GPIO driver for LP3943 MFD. | |
518 | LP3943 can be used as a GPIO expander which provides up to 16 GPIOs. | |
519 | Open drain outputs are required for this usage. | |
520 | ||
e952805d WS |
521 | config GPIO_MAX7300 |
522 | tristate "Maxim MAX7300 GPIO expander" | |
523 | depends on I2C | |
524 | select GPIO_MAX730X | |
525 | help | |
2b861f4b | 526 | GPIO driver for Maxim MAX7300 I2C-based GPIO expander. |
e952805d | 527 | |
bbcd6d54 EM |
528 | config GPIO_MAX732X |
529 | tristate "MAX7319, MAX7320-7327 I2C Port Expanders" | |
530 | depends on I2C | |
531 | help | |
532 | Say yes here to support the MAX7319, MAX7320-7327 series of I2C | |
533 | Port Expanders. Each IO port on these chips has a fixed role of | |
534 | Input (designated by 'I'), Push-Pull Output ('O'), or Open-Drain | |
535 | Input and Output (designed by 'P'). The combinations are listed | |
536 | below: | |
537 | ||
538 | 8 bits: max7319 (8I), max7320 (8O), max7321 (8P), | |
539 | max7322 (4I4O), max7323 (4P4O) | |
540 | ||
541 | 16 bits: max7324 (8I8O), max7325 (8P8O), | |
542 | max7326 (4I12O), max7327 (4P12O) | |
543 | ||
544 | Board setup code must specify the model to use, and the start | |
545 | number for these GPIOs. | |
546 | ||
a80a0bbe MZ |
547 | config GPIO_MAX732X_IRQ |
548 | bool "Interrupt controller support for MAX732x" | |
0244ad00 | 549 | depends on GPIO_MAX732X=y |
a80a0bbe MZ |
550 | help |
551 | Say yes here to enable the max732x to be used as an interrupt | |
552 | controller. It requires the driver to be built in the kernel. | |
553 | ||
608589b1 | 554 | config GPIO_MC9S08DZ60 |
555 | bool "MX35 3DS BOARD MC9S08DZ60 GPIO functions" | |
4c30aa33 | 556 | depends on I2C=y && MACH_MX35_3DS |
608589b1 | 557 | help |
558 | Select this to enable the MC9S08DZ60 GPIO driver | |
559 | ||
f3dc3630 | 560 | config GPIO_PCA953X |
eb32b5aa | 561 | tristate "PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports" |
9e60fdcf | 562 | depends on I2C |
563 | help | |
7059d4b0 DB |
564 | Say yes here to provide access to several register-oriented |
565 | SMBus I/O expanders, made mostly by NXP or TI. Compatible | |
566 | models include: | |
567 | ||
568 | 4 bits: pca9536, pca9537 | |
569 | ||
c29985dd | 570 | 8 bits: max7310, max7315, pca6107, pca9534, pca9538, pca9554, |
e73760a6 | 571 | pca9556, pca9557, pca9574, tca6408, xra1202 |
7059d4b0 | 572 | |
c29985dd AL |
573 | 16 bits: max7312, max7313, pca9535, pca9539, pca9555, pca9575, |
574 | tca6416 | |
9e60fdcf | 575 | |
1e191695 AS |
576 | 24 bits: tca6424 |
577 | ||
eb32b5aa | 578 | 40 bits: pca9505, pca9698 |
1e191695 | 579 | |
89ea8bbe MZ |
580 | config GPIO_PCA953X_IRQ |
581 | bool "Interrupt controller support for PCA953x" | |
582 | depends on GPIO_PCA953X=y | |
7bcbce55 | 583 | select GPIOLIB_IRQCHIP |
89ea8bbe MZ |
584 | help |
585 | Say yes here to enable the pca953x to be used as an interrupt | |
586 | controller. It requires the driver to be built in the kernel. | |
587 | ||
15fae37d | 588 | config GPIO_PCF857X |
1673ad52 | 589 | tristate "PCF857x, PCA{85,96}7x, and MAX732[89] I2C GPIO expanders" |
15fae37d | 590 | depends on I2C |
901acf5b | 591 | select IRQ_DOMAIN |
15fae37d DB |
592 | help |
593 | Say yes here to provide access to most "quasi-bidirectional" I2C | |
594 | GPIO expanders used for additional digital outputs or inputs. | |
595 | Most of these parts are from NXP, though TI is a second source for | |
596 | some of them. Compatible models include: | |
597 | ||
598 | 8 bits: pcf8574, pcf8574a, pca8574, pca8574a, | |
1673ad52 DB |
599 | pca9670, pca9672, pca9674, pca9674a, |
600 | max7328, max7329 | |
15fae37d DB |
601 | |
602 | 16 bits: pcf8575, pcf8575c, pca8575, | |
603 | pca9671, pca9673, pca9675 | |
604 | ||
605 | Your board setup code will need to declare the expanders in | |
606 | use, and assign numbers to the GPIOs they expose. Those GPIOs | |
607 | can then be used from drivers and other kernel code, just like | |
608 | other GPIOs, but only accessible from task contexts. | |
609 | ||
610 | This driver provides an in-kernel interface to those GPIOs using | |
611 | platform-neutral GPIO calls. | |
612 | ||
e9fe32bc LD |
613 | config GPIO_RC5T583 |
614 | bool "RICOH RC5T583 GPIO" | |
615 | depends on MFD_RC5T583 | |
616 | help | |
617 | Select this option to enable GPIO driver for the Ricoh RC5T583 | |
618 | chip family. | |
619 | This driver provides the support for driving/reading the gpio pins | |
620 | of RC5T583 device through standard gpio library. | |
621 | ||
c34f16b7 GB |
622 | config GPIO_SX150X |
623 | bool "Semtech SX150x I2C GPIO expander" | |
624 | depends on I2C=y | |
093e9435 | 625 | select GPIOLIB_IRQCHIP |
c34f16b7 GB |
626 | default n |
627 | help | |
628 | Say yes here to provide support for Semtech SX150-series I2C | |
629 | GPIO expanders. Compatible models include: | |
630 | ||
631 | 8 bits: sx1508q | |
632 | 16 bits: sx1509q | |
633 | ||
03f822f5 RV |
634 | config GPIO_STMPE |
635 | bool "STMPE GPIOs" | |
636 | depends on MFD_STMPE | |
fe44e70d | 637 | select GPIOLIB_IRQCHIP |
03f822f5 RV |
638 | help |
639 | This enables support for the GPIOs found on the STMPE I/O | |
640 | Expanders. | |
641 | ||
5238f7bc JC |
642 | config GPIO_STP_XWAY |
643 | bool "XWAY STP GPIOs" | |
644 | depends on SOC_XWAY | |
645 | help | |
646 | This enables support for the Serial To Parallel (STP) unit found on | |
647 | XWAY SoC. The STP allows the SoC to drive a shift registers cascade, | |
648 | that can be up to 24 bit. This peripheral is aimed at driving leds. | |
649 | Some of the gpios/leds can be auto updated by the soc with dsl and | |
650 | phy status. | |
651 | ||
f4e8afdc SI |
652 | config GPIO_TC3589X |
653 | bool "TC3589X GPIOs" | |
654 | depends on MFD_TC3589X | |
cf42f1cf | 655 | select GPIOLIB_IRQCHIP |
d88b25be | 656 | help |
f4e8afdc | 657 | This enables support for the GPIOs found on the TC3589X |
d88b25be RV |
658 | I/O Expander. |
659 | ||
668a6cc7 MO |
660 | config GPIO_TPS65912 |
661 | tristate "TI TPS65912 GPIO" | |
662 | depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI) | |
663 | help | |
664 | This driver supports TPS65912 gpio chip | |
665 | ||
e9d35947 DB |
666 | config GPIO_TWL4030 |
667 | tristate "TWL4030, TWL5030, and TPS659x0 GPIOs" | |
668 | depends on TWL4030_CORE | |
669 | help | |
670 | Say yes here to access the GPIO signals of various multi-function | |
671 | power management chips from Texas Instruments. | |
672 | ||
70ffd691 PU |
673 | config GPIO_TWL6040 |
674 | tristate "TWL6040 GPO" | |
675 | depends on TWL6040_CORE | |
676 | help | |
677 | Say yes here to access the GPO signals of twl6040 | |
678 | audio chip from Texas Instruments. | |
679 | ||
e4b736f1 MB |
680 | config GPIO_WM831X |
681 | tristate "WM831x GPIOs" | |
682 | depends on MFD_WM831X | |
683 | help | |
684 | Say yes here to access the GPIO signals of WM831x power management | |
685 | chips from Wolfson Microelectronics. | |
686 | ||
38f6ce45 MB |
687 | config GPIO_WM8350 |
688 | tristate "WM8350 GPIOs" | |
689 | depends on MFD_WM8350 | |
690 | help | |
691 | Say yes here to access the GPIO signals of WM8350 power management | |
692 | chips from Wolfson Microelectronics. | |
693 | ||
2955c309 MB |
694 | config GPIO_WM8994 |
695 | tristate "WM8994 GPIOs" | |
696 | depends on MFD_WM8994 | |
697 | help | |
698 | Say yes here to access the GPIO signals of WM8994 audio hub | |
699 | CODECs from Wolfson Microelectronics. | |
700 | ||
ef72af40 MH |
701 | config GPIO_ADP5520 |
702 | tristate "GPIO Support for ADP5520 PMIC" | |
703 | depends on PMIC_ADP5520 | |
704 | help | |
705 | This option enables support for on-chip GPIO found | |
706 | on Analog Devices ADP5520 PMICs. | |
707 | ||
80884094 MH |
708 | config GPIO_ADP5588 |
709 | tristate "ADP5588 I2C GPIO expander" | |
710 | depends on I2C | |
711 | help | |
712 | This option enables support for 18 GPIOs found | |
713 | on Analog Devices ADP5588 GPIO Expanders. | |
80884094 | 714 | |
459773ae MH |
715 | config GPIO_ADP5588_IRQ |
716 | bool "Interrupt controller support for ADP5588" | |
717 | depends on GPIO_ADP5588=y | |
718 | help | |
719 | Say yes here to enable the adp5588 to be used as an interrupt | |
720 | controller. It requires the driver to be built in the kernel. | |
721 | ||
5e969a40 TR |
722 | config GPIO_ADNP |
723 | tristate "Avionic Design N-bit GPIO expander" | |
cb144fe8 | 724 | depends on I2C && OF_GPIO |
0752e169 | 725 | select GPIOLIB_IRQCHIP |
5e969a40 TR |
726 | help |
727 | This option enables support for N GPIOs found on Avionic Design | |
728 | I2C GPIO expanders. The register space will be extended by powers | |
e41e85cc | 729 | of two, so the controller will need to accommodate for that. For |
5e969a40 TR |
730 | example: if a controller provides 48 pins, 6 registers will be |
731 | enough to represent all pins, but the driver will assume a | |
732 | register layout for 64 pins (8 registers). | |
733 | ||
ff1d5c2f MB |
734 | comment "PCI GPIO expanders:" |
735 | ||
5f0a96b0 AS |
736 | config GPIO_CS5535 |
737 | tristate "AMD CS5535/CS5536 GPIO support" | |
5da82cac | 738 | depends on MFD_CS5535 |
5f0a96b0 AS |
739 | help |
740 | The AMD CS5535 and CS5536 southbridges support 28 GPIO pins that | |
741 | can be used for quite a number of things. The CS5535/6 is found on | |
742 | AMD Geode and Lemote Yeeloong devices. | |
743 | ||
744 | If unsure, say N. | |
745 | ||
ff1d5c2f MB |
746 | config GPIO_BT8XX |
747 | tristate "BT8XX GPIO abuser" | |
748 | depends on PCI && VIDEO_BT848=n | |
749 | help | |
22520edc | 750 | The BT8xx frame grabber chip has 24 GPIO pins that can be abused |
ff1d5c2f MB |
751 | as a cheap PCI GPIO card. |
752 | ||
753 | This chip can be found on Miro, Hauppauge and STB TV-cards. | |
754 | ||
755 | The card needs to be physically altered for using it as a | |
756 | GPIO card. For more information on how to build a GPIO card | |
757 | from a BT8xx TV card, see the documentation file at | |
758 | Documentation/bt8xxgpio.txt | |
759 | ||
760 | If unsure, say N. | |
761 | ||
f942a7de DES |
762 | config GPIO_AMD8111 |
763 | tristate "AMD 8111 GPIO driver" | |
764 | depends on PCI | |
765 | help | |
766 | The AMD 8111 south bridge contains 32 GPIO pins which can be used. | |
767 | ||
768 | Note, that usually system firmware/ACPI handles GPIO pins on their | |
769 | own and users might easily break their systems with uncarefull usage | |
770 | of this driver! | |
771 | ||
772 | If unsure, say N | |
773 | ||
84743ea3 DC |
774 | config GPIO_INTEL_MID |
775 | bool "Intel Mid GPIO support" | |
61ab3fe5 | 776 | depends on PCI && X86 |
fc346270 | 777 | select GPIOLIB_IRQCHIP |
8bf02617 | 778 | help |
84743ea3 | 779 | Say Y here to support Intel Mid GPIO. |
8bf02617 | 780 | |
04c17aa8 | 781 | config GPIO_PCH |
868fea05 | 782 | tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7223/ML7831) GPIO" |
3ff35cbc | 783 | depends on PCI && (X86_32 || COMPILE_TEST) |
38eb18a6 | 784 | select GENERIC_IRQ_CHIP |
04c17aa8 TM |
785 | help |
786 | This driver is for PCH(Platform controller Hub) GPIO of Intel Topcliff | |
787 | which is an IOH(Input/Output Hub) for x86 embedded processor. | |
788 | This driver can access PCH GPIO device. | |
789 | ||
868fea05 TM |
790 | This driver also can be used for LAPIS Semiconductor IOH(Input/ |
791 | Output Hub), ML7223 and ML7831. | |
bc786cce | 792 | ML7223 IOH is for MP(Media Phone) use. |
868fea05 TM |
793 | ML7831 IOH is for general purpose use. |
794 | ML7223/ML7831 is companion chip for Intel Atom E6xx series. | |
795 | ML7223/ML7831 is completely compatible for Intel EG20T PCH. | |
bc786cce | 796 | |
49a36793 TM |
797 | config GPIO_ML_IOH |
798 | tristate "OKI SEMICONDUCTOR ML7213 IOH GPIO support" | |
799 | depends on PCI | |
54be5663 | 800 | select GENERIC_IRQ_CHIP |
49a36793 TM |
801 | help |
802 | ML7213 is companion chip for Intel Atom E6xx series. | |
803 | This driver can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/Output | |
804 | Hub) which is for IVI(In-Vehicle Infotainment) use. | |
805 | This driver can access the IOH's GPIO device. | |
806 | ||
b43ab901 SAS |
807 | config GPIO_SODAVILLE |
808 | bool "Intel Sodaville GPIO support" | |
3ffc9ceb | 809 | depends on X86 && PCI && OF |
b43ab901 SAS |
810 | select GPIO_GENERIC |
811 | select GENERIC_IRQ_CHIP | |
812 | help | |
813 | Say Y here to support Intel Sodaville GPIO. | |
814 | ||
35570ac6 RR |
815 | config GPIO_TIMBERDALE |
816 | bool "Support for timberdale GPIO IP" | |
0815c2c0 | 817 | depends on MFD_TIMBERDALE |
35570ac6 RR |
818 | ---help--- |
819 | Add support for the GPIO IP in the timberdale FPGA. | |
820 | ||
9956d02d FF |
821 | config GPIO_RDC321X |
822 | tristate "RDC R-321x GPIO support" | |
0244ad00 | 823 | depends on PCI |
e4be3cb7 | 824 | select MFD_CORE |
9956d02d FF |
825 | select MFD_RDC321X |
826 | help | |
827 | Support for the RDC R321x SoC GPIOs over southbridge | |
828 | PCI configuration space. | |
829 | ||
a9c5fff5 DB |
830 | comment "SPI GPIO expanders:" |
831 | ||
0c36ec31 JB |
832 | config GPIO_MAX7301 |
833 | tristate "Maxim MAX7301 GPIO expander" | |
834 | depends on SPI_MASTER | |
e952805d | 835 | select GPIO_MAX730X |
0c36ec31 | 836 | help |
e952805d | 837 | GPIO driver for Maxim MAX7301 SPI-based GPIO expander. |
0c36ec31 | 838 | |
e58b9e27 | 839 | config GPIO_MCP23S08 |
752ad5e8 | 840 | tristate "Microchip MCP23xxx I/O expander" |
0f119a84 | 841 | depends on (SPI_MASTER && !I2C) || I2C |
e58b9e27 | 842 | help |
752ad5e8 PK |
843 | SPI/I2C driver for Microchip MCP23S08/MCP23S17/MCP23008/MCP23017 |
844 | I/O expanders. | |
0b7bb77f | 845 | This provides a GPIO interface supporting inputs and outputs. |
4e47f91b | 846 | The I2C versions of the chips can be used as interrupt-controller. |
e58b9e27 | 847 | |
1e5db006 RR |
848 | config GPIO_MC33880 |
849 | tristate "Freescale MC33880 high-side/low-side switch" | |
850 | depends on SPI_MASTER | |
851 | help | |
852 | SPI driver for Freescale MC33880 high-side/low-side switch. | |
853 | This provides GPIO interface supporting inputs and outputs. | |
854 | ||
ead6db08 MG |
855 | config GPIO_74X164 |
856 | tristate "74x164 serial-in/parallel-out 8-bits shift register" | |
61e73804 | 857 | depends on SPI_MASTER && OF |
ead6db08 | 858 | help |
61e73804 AS |
859 | Driver for 74x164 compatible serial-in/parallel-out 8-outputs |
860 | shift registers. This driver can be used to provide access | |
ead6db08 MG |
861 | to more gpio outputs. |
862 | ||
4cf8e53b MV |
863 | comment "AC97 GPIO expanders:" |
864 | ||
865 | config GPIO_UCB1400 | |
7d1815e1 | 866 | tristate "Philips UCB1400 GPIO" |
4cf8e53b MV |
867 | depends on UCB1400_CORE |
868 | help | |
869 | This enables support for the Philips UCB1400 GPIO pins. | |
870 | The UCB1400 is an AC97 audio codec. | |
871 | ||
d22fcde0 GR |
872 | comment "LPC GPIO expanders:" |
873 | ||
874 | config GPIO_KEMPLD | |
875 | tristate "Kontron ETX / COMexpress GPIO" | |
876 | depends on MFD_KEMPLD | |
877 | help | |
878 | This enables support for the PLD GPIO interface on some Kontron ETX | |
879 | and COMexpress (ETXexpress) modules. | |
880 | ||
881 | This driver can also be built as a module. If so, the module will be | |
882 | called gpio-kempld. | |
883 | ||
800e69fb IS |
884 | comment "MODULbus GPIO expanders:" |
885 | ||
886 | config GPIO_JANZ_TTL | |
887 | tristate "Janz VMOD-TTL Digital IO Module" | |
888 | depends on MFD_JANZ_CMODIO | |
889 | help | |
890 | This enables support for the Janz VMOD-TTL Digital IO module. | |
891 | This driver provides support for driving the pins in output | |
892 | mode only. Input mode is not supported. | |
893 | ||
3d50a278 LD |
894 | config GPIO_PALMAS |
895 | bool "TI PALMAS series PMICs GPIO" | |
896 | depends on MFD_PALMAS | |
897 | help | |
898 | Select this option to enable GPIO driver for the TI PALMAS | |
899 | series chip family. | |
900 | ||
72bd9860 LD |
901 | config GPIO_TPS6586X |
902 | bool "TPS6586X GPIO" | |
903 | depends on MFD_TPS6586X | |
904 | help | |
905 | Select this option to enable GPIO driver for the TPS6586X | |
906 | chip family. | |
907 | ||
83545d83 JEC |
908 | config GPIO_TPS65910 |
909 | bool "TPS65910 GPIO" | |
910 | depends on MFD_TPS65910 | |
911 | help | |
912 | Select this option to enable GPIO driver for the TPS65910 | |
913 | chip family. | |
25cf2507 MN |
914 | |
915 | config GPIO_MSIC | |
916 | bool "Intel MSIC mixed signal gpio support" | |
917 | depends on MFD_INTEL_MSIC | |
918 | help | |
919 | Enable support for GPIO on intel MSIC controllers found in | |
920 | intel MID devices | |
921 | ||
757651e3 MM |
922 | config GPIO_BCM_KONA |
923 | bool "Broadcom Kona GPIO" | |
7b31997a | 924 | depends on OF_GPIO && (ARCH_BCM_MOBILE || COMPILE_TEST) |
757651e3 MM |
925 | help |
926 | Turn on GPIO support for Broadcom "Kona" chips. | |
927 | ||
9d5b72de LP |
928 | comment "USB GPIO expanders:" |
929 | ||
930 | config GPIO_VIPERBOARD | |
931 | tristate "Viperboard GPIO a & b support" | |
932 | depends on MFD_VIPERBOARD && USB | |
933 | help | |
934 | Say yes here to access the GPIO signals of Nano River | |
935 | Technologies Viperboard. There are two GPIO chips on the | |
936 | board: gpioa and gpiob. | |
937 | See viperboard API specification and Nano | |
938 | River Tech's viperboard.h for detailed meaning | |
939 | of the module parameters. | |
940 | ||
6732127f DB |
941 | config GPIO_DLN2 |
942 | tristate "Diolan DLN2 GPIO support" | |
943 | depends on MFD_DLN2 | |
944 | select GPIOLIB_IRQCHIP | |
945 | ||
946 | help | |
947 | Select this option to enable GPIO driver for the Diolan DLN2 | |
948 | board. | |
949 | ||
950 | This driver can also be built as a module. If so, the module | |
951 | will be called gpio-dln2. | |
952 | ||
7444a72e | 953 | endif |