[deliverable/linux.git] / drivers / hwmon / Kconfig

#
# I2C Sensor chip drivers configuration
#

menu "Hardware Monitoring support"

config HWMON
	tristate "Hardware Monitoring support"
	default y
	help
	  Hardware monitoring devices let you monitor the hardware health
	  of a system. Most modern motherboards include such a device. It
	  can include temperature sensors, voltage sensors, fan speed
	  sensors and various additional features such as the ability to
	  control the speed of the fans.  If you want this support you
	  should say Y here and also to the specific driver(s) for your
	  sensors chip(s) below.

	  This support can also be built as a module.  If so, the module
	  will be called hwmon.

config HWMON_VID
	tristate
	default n

config SENSORS_ADM1021
	tristate "Analog Devices ADM1021 and compatibles"
	depends on HWMON && I2C
	help
	  If you say yes here you get support for Analog Devices ADM1021
	  and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
	  Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10,
	  and the XEON processor built-in sensor.

	  This driver can also be built as a module.  If so, the module
	  will be called adm1021.

config SENSORS_ADM1025
	tristate "Analog Devices ADM1025 and compatibles"
	depends on HWMON && I2C && EXPERIMENTAL
	select HWMON_VID
	help
	  If you say yes here you get support for Analog Devices ADM1025
	  and Philips NE1619 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called adm1025.

config SENSORS_ADM1026
	tristate "Analog Devices ADM1026 and compatibles"
	depends on HWMON && I2C && EXPERIMENTAL
	select HWMON_VID
	help
	  If you say yes here you get support for Analog Devices ADM1026
	  sensor chip.

	  This driver can also be built as a module.  If so, the module
	  will be called adm1026.

config SENSORS_ADM1031
	tristate "Analog Devices ADM1031 and compatibles"
	depends on HWMON && I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for Analog Devices ADM1031
	  and ADM1030 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called adm1031.

config SENSORS_ADM9240
	tristate "Analog Devices ADM9240 and compatibles"
	depends on HWMON && I2C && EXPERIMENTAL
	select HWMON_VID
	help
	  If you say yes here you get support for Analog Devices ADM9240,
	  Dallas DS1780, National Semiconductor LM81 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called adm9240.

config SENSORS_ASB100
	tristate "Asus ASB100 Bach"
	depends on HWMON && I2C && EXPERIMENTAL
	select HWMON_VID
	help
	  If you say yes here you get support for the ASB100 Bach sensor
	  chip found on some Asus mainboards.

	  This driver can also be built as a module.  If so, the module
	  will be called asb100.

config SENSORS_ATXP1
	tristate "Attansic ATXP1 VID controller"
	depends on HWMON && I2C && EXPERIMENTAL
	select HWMON_VID
	help
	  If you say yes here you get support for the Attansic ATXP1 VID
	  controller.

	  If your board have such a chip, you are able to control your CPU
	  core and other voltages.

	  This driver can also be built as a module.  If so, the module
	  will be called atxp1.

config SENSORS_DS1621
	tristate "Dallas Semiconductor DS1621 and DS1625"
	depends on HWMON && I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for Dallas Semiconductor
	  DS1621 and DS1625 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called ds1621.

config SENSORS_F71805F
	tristate "Fintek F71805F/FG"
	depends on HWMON && EXPERIMENTAL
	help
	  If you say yes here you get support for hardware monitoring
	  features of the Fintek F71805F/FG chips.

	  This driver can also be built as a module.  If so, the module
	  will be called f71805f.

config SENSORS_FSCHER
	tristate "FSC Hermes"
	depends on HWMON && I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for Fujitsu Siemens
	  Computers Hermes sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called fscher.

config SENSORS_FSCPOS
	tristate "FSC Poseidon"
	depends on HWMON && I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for Fujitsu Siemens
	  Computers Poseidon sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called fscpos.

config SENSORS_GL518SM
	tristate "Genesys Logic GL518SM"
	depends on HWMON && I2C
	help
	  If you say yes here you get support for Genesys Logic GL518SM
	  sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called gl518sm.

config SENSORS_GL520SM
	tristate "Genesys Logic GL520SM"
	depends on HWMON && I2C && EXPERIMENTAL
	select HWMON_VID
	help
	  If you say yes here you get support for Genesys Logic GL520SM
	  sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called gl520sm.

config SENSORS_IT87
	tristate "ITE IT87xx and compatibles"
	depends on HWMON && I2C
	select I2C_ISA
	select HWMON_VID
	help
	  If you say yes here you get support for ITE IT87xx sensor chips
	  and clones: SiS960.

	  This driver can also be built as a module.  If so, the module
	  will be called it87.

config SENSORS_LM63
	tristate "National Semiconductor LM63"
	depends on HWMON && I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for the National Semiconductor
	  LM63 remote diode digital temperature sensor with integrated fan
	  control.  Such chips are found on the Tyan S4882 (Thunder K8QS Pro)
	  motherboard, among others.

	  This driver can also be built as a module.  If so, the module
	  will be called lm63.

config SENSORS_LM75
	tristate "National Semiconductor LM75 and compatibles"
	depends on HWMON && I2C
	help
	  If you say yes here you get support for National Semiconductor LM75
	  sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in
	  9-bit precision mode), and TelCom (now Microchip) TCN75.

	  The DS75 and DS1775 in 10- to 12-bit precision modes will require
	  a force module parameter. The driver will not handle the extra
	  precision anyhow.

	  This driver can also be built as a module.  If so, the module
	  will be called lm75.

config SENSORS_LM77
	tristate "National Semiconductor LM77"
	depends on HWMON && I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for National Semiconductor LM77
	  sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called lm77.

config SENSORS_LM78
	tristate "National Semiconductor LM78 and compatibles"
	depends on HWMON && I2C && EXPERIMENTAL
	select I2C_ISA
	select HWMON_VID
	help
	  If you say yes here you get support for National Semiconductor LM78,
	  LM78-J and LM79.

	  This driver can also be built as a module.  If so, the module
	  will be called lm78.

config SENSORS_LM80
	tristate "National Semiconductor LM80"
	depends on HWMON && I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for National Semiconductor
	  LM80 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called lm80.

config SENSORS_LM83
	tristate "National Semiconductor LM83 and compatibles"
	depends on HWMON && I2C
	help
	  If you say yes here you get support for National Semiconductor
	  LM82 and LM83 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called lm83.

config SENSORS_LM85
	tristate "National Semiconductor LM85 and compatibles"
	depends on HWMON && I2C && EXPERIMENTAL
	select HWMON_VID
	help
	  If you say yes here you get support for National Semiconductor LM85
	  sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027.

	  This driver can also be built as a module.  If so, the module
	  will be called lm85.

config SENSORS_LM87
	tristate "National Semiconductor LM87"
	depends on HWMON && I2C && EXPERIMENTAL
	select HWMON_VID
	help
	  If you say yes here you get support for National Semiconductor LM87
	  sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called lm87.

config SENSORS_LM90
	tristate "National Semiconductor LM90 and compatibles"
	depends on HWMON && I2C
	help
	  If you say yes here you get support for National Semiconductor LM90,
	  LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657 and
	  MAX6658 sensor chips.

	  The Analog Devices ADT7461 sensor chip is also supported, but only
	  if found in ADM1032 compatibility mode.

	  This driver can also be built as a module.  If so, the module
	  will be called lm90.

config SENSORS_LM92
	tristate "National Semiconductor LM92 and compatibles"
	depends on HWMON && I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for National Semiconductor LM92
	  and Maxim MAX6635 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called lm92.

config SENSORS_MAX1619
	tristate "Maxim MAX1619 sensor chip"
	depends on HWMON && I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for MAX1619 sensor chip.

	  This driver can also be built as a module.  If so, the module
	  will be called max1619.

config SENSORS_PC87360
	tristate "National Semiconductor PC87360 family"
	depends on HWMON && I2C && EXPERIMENTAL
	select I2C_ISA
	select HWMON_VID
	help
	  If you say yes here you get access to the hardware monitoring
	  functions of the National Semiconductor PC8736x Super-I/O chips.
	  The PC87360, PC87363 and PC87364 only have fan monitoring and
	  control.  The PC87365 and PC87366 additionally have voltage and
	  temperature monitoring.

	  This driver can also be built as a module.  If so, the module
	  will be called pc87360.

config SENSORS_SIS5595
	tristate "Silicon Integrated Systems Corp. SiS5595"
	depends on HWMON && I2C && PCI && EXPERIMENTAL
	select I2C_ISA
	help
	  If you say yes here you get support for the integrated sensors in
	  SiS5595 South Bridges.

	  This driver can also be built as a module.  If so, the module
	  will be called sis5595.

config SENSORS_SMSC47M1
	tristate "SMSC LPC47M10x and compatibles"
	depends on HWMON && I2C && EXPERIMENTAL
	select I2C_ISA
	help
	  If you say yes here you get support for the integrated fan
	  monitoring and control capabilities of the SMSC LPC47B27x,
	  LPC47M10x, LPC47M13x, LPC47M14x, LPC47M15x and LPC47M192 chips.

	  This driver can also be built as a module.  If so, the module
	  will be called smsc47m1.

config SENSORS_SMSC47B397
	tristate "SMSC LPC47B397-NC"
	depends on HWMON && I2C && EXPERIMENTAL
	select I2C_ISA
	help
	  If you say yes here you get support for the SMSC LPC47B397-NC
	  sensor chip.

	  This driver can also be built as a module.  If so, the module
	  will be called smsc47b397.

config SENSORS_VIA686A
	tristate "VIA686A"
	depends on HWMON && I2C && PCI
	select I2C_ISA
	help
	  If you say yes here you get support for the integrated sensors in
	  Via 686A/B South Bridges.

	  This driver can also be built as a module.  If so, the module
	  will be called via686a.

config SENSORS_VT8231
	tristate "VT8231"
	depends on HWMON && I2C && PCI && EXPERIMENTAL
	select HWMON_VID
	select I2C_ISA
	help
	  If you say yes here then you get support for the integrated sensors
	  in the VIA VT8231 device.

	  This driver can also be built as a module.  If so, the module
	  will be called vt8231.

config SENSORS_W83781D
	tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F"
	depends on HWMON && I2C
	select I2C_ISA
	select HWMON_VID
	help
	  If you say yes here you get support for the Winbond W8378x series
	  of sensor chips: the W83781D, W83782D, W83783S and W83627HF,
	  and the similar Asus AS99127F.

	  This driver can also be built as a module.  If so, the module
	  will be called w83781d.

config SENSORS_W83792D
	tristate "Winbond W83792D"
	depends on HWMON && I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for the Winbond W83792D chip.

	  This driver can also be built as a module.  If so, the module
	  will be called w83792d.

config SENSORS_W83L785TS
	tristate "Winbond W83L785TS-S"
	depends on HWMON && I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for the Winbond W83L785TS-S
	  sensor chip, which is used on the Asus A7N8X, among other
	  motherboards.

	  This driver can also be built as a module.  If so, the module
	  will be called w83l785ts.

config SENSORS_W83627HF
	tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
	depends on HWMON && I2C
	select I2C_ISA
	select HWMON_VID
	help
	  If you say yes here you get support for the Winbond W836X7 series
	  of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
	  W83697HF.

	  This driver can also be built as a module.  If so, the module
	  will be called w83627hf.

config SENSORS_W83627EHF
	tristate "Winbond W83627EHF"
	depends on HWMON && I2C && EXPERIMENTAL
	select I2C_ISA
	help
	  If you say yes here you get preliminary support for the hardware
	  monitoring functionality of the Winbond W83627EHF Super-I/O chip.
	  Only fan and temperature inputs are supported at the moment, while
	  the chip does much more than that.

	  This driver also supports the W83627EHG, which is the lead-free
	  version of the W83627EHF.

	  This driver can also be built as a module.  If so, the module
	  will be called w83627ehf.

config SENSORS_HDAPS
	tristate "IBM Hard Drive Active Protection System (hdaps)"
	depends on HWMON && INPUT && X86
	default n
	help
	  This driver provides support for the IBM Hard Drive Active Protection
	  System (hdaps), which provides an accelerometer and other misc. data.
	  ThinkPads starting with the R50, T41, and X40 are supported.  The
	  accelerometer data is readable via sysfs.

	  This driver also provides an absolute input class device, allowing
	  the laptop to act as a pinball machine-esque joystick.

	  Say Y here if you have an applicable laptop and want to experience
	  the awesome power of hdaps.

config HWMON_DEBUG_CHIP
	bool "Hardware Monitoring Chip debugging messages"
	depends on HWMON
	default n
	help
	  Say Y here if you want the I2C chip drivers to produce a bunch of
	  debug messages to the system log.  Select this if you are having
	  a problem with I2C support and want to see more of what is going
	  on.

endmenu
Commit	Line	Data
ad2f931d JD	1	#
	2	# I2C Sensor chip drivers configuration
	3	#
	4
	5	menu "Hardware Monitoring support"
	6
	7	config HWMON
	8	tristate "Hardware Monitoring support"
	9	default y
	10	help
	11	Hardware monitoring devices let you monitor the hardware health
	12	of a system. Most modern motherboards include such a device. It
	13	can include temperature sensors, voltage sensors, fan speed
	14	sensors and various additional features such as the ability to
1236441f MH	15	control the speed of the fans. If you want this support you
	16	should say Y here and also to the specific driver(s) for your
	17	sensors chip(s) below.
	18
	19	This support can also be built as a module. If so, the module
	20	will be called hwmon.
ad2f931d	21
303760b4 JD	22	config HWMON_VID
	23	tristate
	24	default n
	25
ad2f931d JD	26	config SENSORS_ADM1021
	27	tristate "Analog Devices ADM1021 and compatibles"
	28	depends on HWMON && I2C
ad2f931d JD	29	help
	30	If you say yes here you get support for Analog Devices ADM1021
	31	and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
	32	Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10,
	33	and the XEON processor built-in sensor.
	34
	35	This driver can also be built as a module. If so, the module
	36	will be called adm1021.
	37
	38	config SENSORS_ADM1025
	39	tristate "Analog Devices ADM1025 and compatibles"
	40	depends on HWMON && I2C && EXPERIMENTAL
303760b4	41	select HWMON_VID
ad2f931d JD	42	help
	43	If you say yes here you get support for Analog Devices ADM1025
	44	and Philips NE1619 sensor chips.
	45
	46	This driver can also be built as a module. If so, the module
	47	will be called adm1025.
	48
	49	config SENSORS_ADM1026
	50	tristate "Analog Devices ADM1026 and compatibles"
	51	depends on HWMON && I2C && EXPERIMENTAL
303760b4	52	select HWMON_VID
ad2f931d JD	53	help
	54	If you say yes here you get support for Analog Devices ADM1026
	55	sensor chip.
	56
	57	This driver can also be built as a module. If so, the module
	58	will be called adm1026.
	59
	60	config SENSORS_ADM1031
	61	tristate "Analog Devices ADM1031 and compatibles"
	62	depends on HWMON && I2C && EXPERIMENTAL
ad2f931d JD	63	help
	64	If you say yes here you get support for Analog Devices ADM1031
	65	and ADM1030 sensor chips.
	66
	67	This driver can also be built as a module. If so, the module
	68	will be called adm1031.
	69
	70	config SENSORS_ADM9240
	71	tristate "Analog Devices ADM9240 and compatibles"
	72	depends on HWMON && I2C && EXPERIMENTAL
303760b4	73	select HWMON_VID
ad2f931d JD	74	help
	75	If you say yes here you get support for Analog Devices ADM9240,
	76	Dallas DS1780, National Semiconductor LM81 sensor chips.
	77
	78	This driver can also be built as a module. If so, the module
	79	will be called adm9240.
	80
	81	config SENSORS_ASB100
	82	tristate "Asus ASB100 Bach"
	83	depends on HWMON && I2C && EXPERIMENTAL
303760b4	84	select HWMON_VID
ad2f931d JD	85	help
	86	If you say yes here you get support for the ASB100 Bach sensor
	87	chip found on some Asus mainboards.
	88
	89	This driver can also be built as a module. If so, the module
	90	will be called asb100.
	91
	92	config SENSORS_ATXP1
	93	tristate "Attansic ATXP1 VID controller"
	94	depends on HWMON && I2C && EXPERIMENTAL
303760b4	95	select HWMON_VID
ad2f931d JD	96	help
	97	If you say yes here you get support for the Attansic ATXP1 VID
	98	controller.
	99
	100	If your board have such a chip, you are able to control your CPU
	101	core and other voltages.
	102
	103	This driver can also be built as a module. If so, the module
	104	will be called atxp1.
	105
	106	config SENSORS_DS1621
	107	tristate "Dallas Semiconductor DS1621 and DS1625"
	108	depends on HWMON && I2C && EXPERIMENTAL
ad2f931d JD	109	help
	110	If you say yes here you get support for Dallas Semiconductor
	111	DS1621 and DS1625 sensor chips.
	112
	113	This driver can also be built as a module. If so, the module
	114	will be called ds1621.
	115
e53004e2 JD	116	config SENSORS_F71805F
	117	tristate "Fintek F71805F/FG"
	118	depends on HWMON && EXPERIMENTAL
	119	help
	120	If you say yes here you get support for hardware monitoring
	121	features of the Fintek F71805F/FG chips.
	122
	123	This driver can also be built as a module. If so, the module
	124	will be called f71805f.
	125
ad2f931d JD	126	config SENSORS_FSCHER
	127	tristate "FSC Hermes"
	128	depends on HWMON && I2C && EXPERIMENTAL
ad2f931d JD	129	help
	130	If you say yes here you get support for Fujitsu Siemens
	131	Computers Hermes sensor chips.
	132
	133	This driver can also be built as a module. If so, the module
	134	will be called fscher.
	135
	136	config SENSORS_FSCPOS
	137	tristate "FSC Poseidon"
	138	depends on HWMON && I2C && EXPERIMENTAL
ad2f931d JD	139	help
	140	If you say yes here you get support for Fujitsu Siemens
	141	Computers Poseidon sensor chips.
	142
	143	This driver can also be built as a module. If so, the module
	144	will be called fscpos.
	145
	146	config SENSORS_GL518SM
	147	tristate "Genesys Logic GL518SM"
	148	depends on HWMON && I2C
ad2f931d JD	149	help
	150	If you say yes here you get support for Genesys Logic GL518SM
	151	sensor chips.
	152
	153	This driver can also be built as a module. If so, the module
	154	will be called gl518sm.
	155
	156	config SENSORS_GL520SM
	157	tristate "Genesys Logic GL520SM"
	158	depends on HWMON && I2C && EXPERIMENTAL
303760b4	159	select HWMON_VID
ad2f931d JD	160	help
	161	If you say yes here you get support for Genesys Logic GL520SM
	162	sensor chips.
	163
	164	This driver can also be built as a module. If so, the module
	165	will be called gl520sm.
	166
	167	config SENSORS_IT87
	168	tristate "ITE IT87xx and compatibles"
	169	depends on HWMON && I2C
5042c7d7	170	select I2C_ISA
303760b4	171	select HWMON_VID
ad2f931d JD	172	help
	173	If you say yes here you get support for ITE IT87xx sensor chips
	174	and clones: SiS960.
	175
	176	This driver can also be built as a module. If so, the module
	177	will be called it87.
	178
	179	config SENSORS_LM63
	180	tristate "National Semiconductor LM63"
	181	depends on HWMON && I2C && EXPERIMENTAL
ad2f931d JD	182	help
	183	If you say yes here you get support for the National Semiconductor
	184	LM63 remote diode digital temperature sensor with integrated fan
	185	control. Such chips are found on the Tyan S4882 (Thunder K8QS Pro)
	186	motherboard, among others.
	187
	188	This driver can also be built as a module. If so, the module
	189	will be called lm63.
	190
	191	config SENSORS_LM75
	192	tristate "National Semiconductor LM75 and compatibles"
	193	depends on HWMON && I2C
ad2f931d JD	194	help
	195	If you say yes here you get support for National Semiconductor LM75
	196	sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in
	197	9-bit precision mode), and TelCom (now Microchip) TCN75.
	198
	199	The DS75 and DS1775 in 10- to 12-bit precision modes will require
	200	a force module parameter. The driver will not handle the extra
	201	precision anyhow.
	202
	203	This driver can also be built as a module. If so, the module
	204	will be called lm75.
	205
	206	config SENSORS_LM77
	207	tristate "National Semiconductor LM77"
	208	depends on HWMON && I2C && EXPERIMENTAL
ad2f931d JD	209	help
	210	If you say yes here you get support for National Semiconductor LM77
	211	sensor chips.
	212
	213	This driver can also be built as a module. If so, the module
	214	will be called lm77.
	215
	216	config SENSORS_LM78
	217	tristate "National Semiconductor LM78 and compatibles"
	218	depends on HWMON && I2C && EXPERIMENTAL
5042c7d7	219	select I2C_ISA
19f673ed	220	select HWMON_VID
ad2f931d JD	221	help
	222	If you say yes here you get support for National Semiconductor LM78,
	223	LM78-J and LM79.
	224
	225	This driver can also be built as a module. If so, the module
	226	will be called lm78.
	227
	228	config SENSORS_LM80
	229	tristate "National Semiconductor LM80"
	230	depends on HWMON && I2C && EXPERIMENTAL
ad2f931d JD	231	help
	232	If you say yes here you get support for National Semiconductor
	233	LM80 sensor chips.
	234
	235	This driver can also be built as a module. If so, the module
	236	will be called lm80.
	237
	238	config SENSORS_LM83
43cb7ebe	239	tristate "National Semiconductor LM83 and compatibles"
ad2f931d	240	depends on HWMON && I2C
ad2f931d JD	241	help
ad2f931d JD	242	If you say yes here you get support for National Semiconductor
43cb7ebe	243	LM82 and LM83 sensor chips.
ad2f931d JD	244
	245	This driver can also be built as a module. If so, the module
	246	will be called lm83.
	247
	248	config SENSORS_LM85
	249	tristate "National Semiconductor LM85 and compatibles"
	250	depends on HWMON && I2C && EXPERIMENTAL
303760b4	251	select HWMON_VID
ad2f931d JD	252	help
	253	If you say yes here you get support for National Semiconductor LM85
	254	sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027.
	255
	256	This driver can also be built as a module. If so, the module
	257	will be called lm85.
	258
	259	config SENSORS_LM87
	260	tristate "National Semiconductor LM87"
	261	depends on HWMON && I2C && EXPERIMENTAL
303760b4	262	select HWMON_VID
ad2f931d JD	263	help
	264	If you say yes here you get support for National Semiconductor LM87
	265	sensor chips.
	266
	267	This driver can also be built as a module. If so, the module
	268	will be called lm87.
	269
	270	config SENSORS_LM90
	271	tristate "National Semiconductor LM90 and compatibles"
	272	depends on HWMON && I2C
ad2f931d JD	273	help
	274	If you say yes here you get support for National Semiconductor LM90,
	275	LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657 and
	276	MAX6658 sensor chips.
	277
	278	The Analog Devices ADT7461 sensor chip is also supported, but only
	279	if found in ADM1032 compatibility mode.
	280
	281	This driver can also be built as a module. If so, the module
	282	will be called lm90.
	283
	284	config SENSORS_LM92
	285	tristate "National Semiconductor LM92 and compatibles"
	286	depends on HWMON && I2C && EXPERIMENTAL
ad2f931d JD	287	help
	288	If you say yes here you get support for National Semiconductor LM92
	289	and Maxim MAX6635 sensor chips.
	290
	291	This driver can also be built as a module. If so, the module
	292	will be called lm92.
	293
	294	config SENSORS_MAX1619
	295	tristate "Maxim MAX1619 sensor chip"
	296	depends on HWMON && I2C && EXPERIMENTAL
ad2f931d JD	297	help
	298	If you say yes here you get support for MAX1619 sensor chip.
	299
	300	This driver can also be built as a module. If so, the module
	301	will be called max1619.
	302
	303	config SENSORS_PC87360
	304	tristate "National Semiconductor PC87360 family"
	305	depends on HWMON && I2C && EXPERIMENTAL
ad2f931d	306	select I2C_ISA
303760b4	307	select HWMON_VID
ad2f931d JD	308	help
	309	If you say yes here you get access to the hardware monitoring
	310	functions of the National Semiconductor PC8736x Super-I/O chips.
	311	The PC87360, PC87363 and PC87364 only have fan monitoring and
	312	control. The PC87365 and PC87366 additionally have voltage and
	313	temperature monitoring.
	314
	315	This driver can also be built as a module. If so, the module
	316	will be called pc87360.
	317
	318	config SENSORS_SIS5595
	319	tristate "Silicon Integrated Systems Corp. SiS5595"
	320	depends on HWMON && I2C && PCI && EXPERIMENTAL
ad2f931d JD	321	select I2C_ISA
	322	help
	323	If you say yes here you get support for the integrated sensors in
	324	SiS5595 South Bridges.
	325
	326	This driver can also be built as a module. If so, the module
	327	will be called sis5595.
	328
	329	config SENSORS_SMSC47M1
	330	tristate "SMSC LPC47M10x and compatibles"
	331	depends on HWMON && I2C && EXPERIMENTAL
ad2f931d JD	332	select I2C_ISA
	333	help
	334	If you say yes here you get support for the integrated fan
	335	monitoring and control capabilities of the SMSC LPC47B27x,
	336	LPC47M10x, LPC47M13x, LPC47M14x, LPC47M15x and LPC47M192 chips.
	337
	338	This driver can also be built as a module. If so, the module
	339	will be called smsc47m1.
	340
	341	config SENSORS_SMSC47B397
	342	tristate "SMSC LPC47B397-NC"
	343	depends on HWMON && I2C && EXPERIMENTAL
ad2f931d JD	344	select I2C_ISA
	345	help
	346	If you say yes here you get support for the SMSC LPC47B397-NC
	347	sensor chip.
	348
	349	This driver can also be built as a module. If so, the module
	350	will be called smsc47b397.
	351
	352	config SENSORS_VIA686A
	353	tristate "VIA686A"
	354	depends on HWMON && I2C && PCI
ad2f931d JD	355	select I2C_ISA
	356	help
	357	If you say yes here you get support for the integrated sensors in
	358	Via 686A/B South Bridges.
	359
	360	This driver can also be built as a module. If so, the module
	361	will be called via686a.
	362
1de9e371 RL	363	config SENSORS_VT8231
	364	tristate "VT8231"
	365	depends on HWMON && I2C && PCI && EXPERIMENTAL
	366	select HWMON_VID
	367	select I2C_ISA
	368	help
	369	If you say yes here then you get support for the integrated sensors
	370	in the VIA VT8231 device.
	371
	372	This driver can also be built as a module. If so, the module
	373	will be called vt8231.
	374
ad2f931d JD	375	config SENSORS_W83781D
	376	tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F"
	377	depends on HWMON && I2C
5042c7d7	378	select I2C_ISA
303760b4	379	select HWMON_VID
ad2f931d JD	380	help
	381	If you say yes here you get support for the Winbond W8378x series
	382	of sensor chips: the W83781D, W83782D, W83783S and W83627HF,
	383	and the similar Asus AS99127F.
	384
	385	This driver can also be built as a module. If so, the module
	386	will be called w83781d.
	387
5563e27d M	388	config SENSORS_W83792D
	389	tristate "Winbond W83792D"
	390	depends on HWMON && I2C && EXPERIMENTAL
5563e27d M	391	help
	392	If you say yes here you get support for the Winbond W83792D chip.
	393
	394	This driver can also be built as a module. If so, the module
	395	will be called w83792d.
	396
ad2f931d JD	397	config SENSORS_W83L785TS
	398	tristate "Winbond W83L785TS-S"
	399	depends on HWMON && I2C && EXPERIMENTAL
ad2f931d JD	400	help
	401	If you say yes here you get support for the Winbond W83L785TS-S
	402	sensor chip, which is used on the Asus A7N8X, among other
	403	motherboards.
	404
	405	This driver can also be built as a module. If so, the module
	406	will be called w83l785ts.
	407
	408	config SENSORS_W83627HF
c2db6ce1 JD	409	tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
c2db6ce1 JD	410	depends on HWMON && I2C
ad2f931d	411	select I2C_ISA
303760b4	412	select HWMON_VID
ad2f931d JD	413	help
ad2f931d JD	414	If you say yes here you get support for the Winbond W836X7 series
c2db6ce1 JD	415	of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
c2db6ce1 JD	416	W83697HF.
ad2f931d JD	417
	418	This driver can also be built as a module. If so, the module
	419	will be called w83627hf.
	420
	421	config SENSORS_W83627EHF
	422	tristate "Winbond W83627EHF"
	423	depends on HWMON && I2C && EXPERIMENTAL
ad2f931d JD	424	select I2C_ISA
	425	help
	426	If you say yes here you get preliminary support for the hardware
	427	monitoring functionality of the Winbond W83627EHF Super-I/O chip.
	428	Only fan and temperature inputs are supported at the moment, while
	429	the chip does much more than that.
	430
8dd2d2ca JD	431	This driver also supports the W83627EHG, which is the lead-free
	432	version of the W83627EHF.
	433
ad2f931d JD	434	This driver can also be built as a module. If so, the module
	435	will be called w83627ehf.
	436
860e1d6b RL	437	config SENSORS_HDAPS
	438	tristate "IBM Hard Drive Active Protection System (hdaps)"
	439	depends on HWMON && INPUT && X86
	440	default n
	441	help
	442	This driver provides support for the IBM Hard Drive Active Protection
	443	System (hdaps), which provides an accelerometer and other misc. data.
4c87b74c RL	444	ThinkPads starting with the R50, T41, and X40 are supported. The
4c87b74c RL	445	accelerometer data is readable via sysfs.
860e1d6b	446
4c87b74c RL	447	This driver also provides an absolute input class device, allowing
4c87b74c RL	448	the laptop to act as a pinball machine-esque joystick.
860e1d6b RL	449
	450	Say Y here if you have an applicable laptop and want to experience
	451	the awesome power of hdaps.
	452
ad2f931d JD	453	config HWMON_DEBUG_CHIP
	454	bool "Hardware Monitoring Chip debugging messages"
	455	depends on HWMON
	456	default n
	457	help
	458	Say Y here if you want the I2C chip drivers to produce a bunch of
	459	debug messages to the system log. Select this if you are having
	460	a problem with I2C support and want to see more of what is going
	461	on.
	462
	463	endmenu