Commit | Line | Data |
---|---|---|
569ff102 HG |
1 | /* fschmd.c |
2 | * | |
3 | * Copyright (C) 2007 Hans de Goede <j.w.r.degoede@hhs.nl> | |
4 | * | |
5 | * This program is free software; you can redistribute it and/or modify | |
6 | * it under the terms of the GNU General Public License as published by | |
7 | * the Free Software Foundation; either version 2 of the License, or | |
8 | * (at your option) any later version. | |
9 | * | |
10 | * This program is distributed in the hope that it will be useful, | |
11 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
12 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
13 | * GNU General Public License for more details. | |
14 | * | |
15 | * You should have received a copy of the GNU General Public License | |
16 | * along with this program; if not, write to the Free Software | |
17 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
18 | */ | |
19 | ||
20 | /* | |
21 | * Merged Fujitsu Siemens hwmon driver, supporting the Poseidon, Hermes, | |
22 | * Scylla, Heracles and Heimdall chips | |
23 | * | |
24 | * Based on the original 2.4 fscscy, 2.6 fscpos, 2.6 fscher and 2.6 | |
25 | * (candidate) fschmd drivers: | |
26 | * Copyright (C) 2006 Thilo Cestonaro | |
27 | * <thilo.cestonaro.external@fujitsu-siemens.com> | |
28 | * Copyright (C) 2004, 2005 Stefan Ott <stefan@desire.ch> | |
29 | * Copyright (C) 2003, 2004 Reinhard Nissl <rnissl@gmx.de> | |
30 | * Copyright (c) 2001 Martin Knoblauch <mkn@teraport.de, knobi@knobisoft.de> | |
31 | * Copyright (C) 2000 Hermann Jung <hej@odn.de> | |
32 | */ | |
33 | ||
34 | #include <linux/module.h> | |
35 | #include <linux/init.h> | |
36 | #include <linux/slab.h> | |
37 | #include <linux/jiffies.h> | |
38 | #include <linux/i2c.h> | |
39 | #include <linux/hwmon.h> | |
40 | #include <linux/hwmon-sysfs.h> | |
41 | #include <linux/err.h> | |
42 | #include <linux/mutex.h> | |
43 | #include <linux/sysfs.h> | |
7845cd79 | 44 | #include <linux/dmi.h> |
569ff102 HG |
45 | |
46 | /* Addresses to scan */ | |
25e9c86d | 47 | static const unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END }; |
569ff102 HG |
48 | |
49 | /* Insmod parameters */ | |
50 | I2C_CLIENT_INSMOD_5(fscpos, fscher, fscscy, fschrc, fschmd); | |
51 | ||
52 | /* | |
53 | * The FSCHMD registers and other defines | |
54 | */ | |
55 | ||
56 | /* chip identification */ | |
57 | #define FSCHMD_REG_IDENT_0 0x00 | |
58 | #define FSCHMD_REG_IDENT_1 0x01 | |
59 | #define FSCHMD_REG_IDENT_2 0x02 | |
60 | #define FSCHMD_REG_REVISION 0x03 | |
61 | ||
62 | /* global control and status */ | |
63 | #define FSCHMD_REG_EVENT_STATE 0x04 | |
64 | #define FSCHMD_REG_CONTROL 0x05 | |
65 | ||
66 | #define FSCHMD_CONTROL_ALERT_LED_MASK 0x01 | |
67 | ||
68 | /* watchdog (support to be implemented) */ | |
69 | #define FSCHMD_REG_WDOG_PRESET 0x28 | |
70 | #define FSCHMD_REG_WDOG_STATE 0x23 | |
71 | #define FSCHMD_REG_WDOG_CONTROL 0x21 | |
72 | ||
73 | /* voltages, weird order is to keep the same order as the old drivers */ | |
74 | static const u8 FSCHMD_REG_VOLT[3] = { 0x45, 0x42, 0x48 }; | |
75 | ||
76 | /* minimum pwm at which the fan is driven (pwm can by increased depending on | |
77 | the temp. Notice that for the scy some fans share there minimum speed. | |
78 | Also notice that with the scy the sensor order is different then with the | |
79 | other chips, this order was in the 2.4 driver and kept for consistency. */ | |
80 | static const u8 FSCHMD_REG_FAN_MIN[5][6] = { | |
81 | { 0x55, 0x65 }, /* pos */ | |
82 | { 0x55, 0x65, 0xb5 }, /* her */ | |
83 | { 0x65, 0x65, 0x55, 0xa5, 0x55, 0xa5 }, /* scy */ | |
84 | { 0x55, 0x65, 0xa5, 0xb5 }, /* hrc */ | |
85 | { 0x55, 0x65, 0xa5, 0xb5, 0xc5 }, /* hmd */ | |
86 | }; | |
87 | ||
88 | /* actual fan speed */ | |
89 | static const u8 FSCHMD_REG_FAN_ACT[5][6] = { | |
90 | { 0x0e, 0x6b, 0xab }, /* pos */ | |
91 | { 0x0e, 0x6b, 0xbb }, /* her */ | |
92 | { 0x6b, 0x6c, 0x0e, 0xab, 0x5c, 0xbb }, /* scy */ | |
93 | { 0x0e, 0x6b, 0xab, 0xbb }, /* hrc */ | |
94 | { 0x5b, 0x6b, 0xab, 0xbb, 0xcb }, /* hmd */ | |
95 | }; | |
96 | ||
97 | /* fan status registers */ | |
98 | static const u8 FSCHMD_REG_FAN_STATE[5][6] = { | |
99 | { 0x0d, 0x62, 0xa2 }, /* pos */ | |
100 | { 0x0d, 0x62, 0xb2 }, /* her */ | |
101 | { 0x62, 0x61, 0x0d, 0xa2, 0x52, 0xb2 }, /* scy */ | |
102 | { 0x0d, 0x62, 0xa2, 0xb2 }, /* hrc */ | |
103 | { 0x52, 0x62, 0xa2, 0xb2, 0xc2 }, /* hmd */ | |
104 | }; | |
105 | ||
106 | /* fan ripple / divider registers */ | |
107 | static const u8 FSCHMD_REG_FAN_RIPPLE[5][6] = { | |
108 | { 0x0f, 0x6f, 0xaf }, /* pos */ | |
109 | { 0x0f, 0x6f, 0xbf }, /* her */ | |
110 | { 0x6f, 0x6f, 0x0f, 0xaf, 0x0f, 0xbf }, /* scy */ | |
111 | { 0x0f, 0x6f, 0xaf, 0xbf }, /* hrc */ | |
112 | { 0x5f, 0x6f, 0xaf, 0xbf, 0xcf }, /* hmd */ | |
113 | }; | |
114 | ||
115 | static const int FSCHMD_NO_FAN_SENSORS[5] = { 3, 3, 6, 4, 5 }; | |
116 | ||
117 | /* Fan status register bitmasks */ | |
118 | #define FSCHMD_FAN_ALARM_MASK 0x04 /* called fault by FSC! */ | |
119 | #define FSCHMD_FAN_NOT_PRESENT_MASK 0x08 /* not documented */ | |
120 | ||
121 | ||
122 | /* actual temperature registers */ | |
123 | static const u8 FSCHMD_REG_TEMP_ACT[5][5] = { | |
124 | { 0x64, 0x32, 0x35 }, /* pos */ | |
125 | { 0x64, 0x32, 0x35 }, /* her */ | |
126 | { 0x64, 0xD0, 0x32, 0x35 }, /* scy */ | |
127 | { 0x64, 0x32, 0x35 }, /* hrc */ | |
128 | { 0x70, 0x80, 0x90, 0xd0, 0xe0 }, /* hmd */ | |
129 | }; | |
130 | ||
131 | /* temperature state registers */ | |
132 | static const u8 FSCHMD_REG_TEMP_STATE[5][5] = { | |
133 | { 0x71, 0x81, 0x91 }, /* pos */ | |
134 | { 0x71, 0x81, 0x91 }, /* her */ | |
135 | { 0x71, 0xd1, 0x81, 0x91 }, /* scy */ | |
136 | { 0x71, 0x81, 0x91 }, /* hrc */ | |
7dcf9a31 | 137 | { 0x71, 0x81, 0x91, 0xd1, 0xe1 }, /* hmd */ |
569ff102 HG |
138 | }; |
139 | ||
140 | /* temperature high limit registers, FSC does not document these. Proven to be | |
141 | there with field testing on the fscher and fschrc, already supported / used | |
142 | in the fscscy 2.4 driver. FSC has confirmed that the fschmd has registers | |
143 | at these addresses, but doesn't want to confirm they are the same as with | |
144 | the fscher?? */ | |
145 | static const u8 FSCHMD_REG_TEMP_LIMIT[5][5] = { | |
146 | { 0, 0, 0 }, /* pos */ | |
147 | { 0x76, 0x86, 0x96 }, /* her */ | |
148 | { 0x76, 0xd6, 0x86, 0x96 }, /* scy */ | |
149 | { 0x76, 0x86, 0x96 }, /* hrc */ | |
7dcf9a31 | 150 | { 0x76, 0x86, 0x96, 0xd6, 0xe6 }, /* hmd */ |
569ff102 HG |
151 | }; |
152 | ||
153 | /* These were found through experimenting with an fscher, currently they are | |
154 | not used, but we keep them around for future reference. | |
155 | static const u8 FSCHER_REG_TEMP_AUTOP1[] = { 0x73, 0x83, 0x93 }; | |
156 | static const u8 FSCHER_REG_TEMP_AUTOP2[] = { 0x75, 0x85, 0x95 }; */ | |
157 | ||
158 | static const int FSCHMD_NO_TEMP_SENSORS[5] = { 3, 3, 4, 3, 5 }; | |
159 | ||
160 | /* temp status register bitmasks */ | |
161 | #define FSCHMD_TEMP_WORKING_MASK 0x01 | |
162 | #define FSCHMD_TEMP_ALERT_MASK 0x02 | |
163 | /* there only really is an alarm if the sensor is working and alert == 1 */ | |
164 | #define FSCHMD_TEMP_ALARM_MASK \ | |
165 | (FSCHMD_TEMP_WORKING_MASK | FSCHMD_TEMP_ALERT_MASK) | |
166 | ||
167 | /* our driver name */ | |
168 | #define FSCHMD_NAME "fschmd" | |
169 | ||
170 | /* | |
171 | * Functions declarations | |
172 | */ | |
173 | ||
174 | static int fschmd_attach_adapter(struct i2c_adapter *adapter); | |
175 | static int fschmd_detach_client(struct i2c_client *client); | |
176 | static struct fschmd_data *fschmd_update_device(struct device *dev); | |
177 | ||
178 | /* | |
179 | * Driver data (common to all clients) | |
180 | */ | |
181 | ||
182 | static struct i2c_driver fschmd_driver = { | |
183 | .driver = { | |
184 | .name = FSCHMD_NAME, | |
185 | }, | |
186 | .attach_adapter = fschmd_attach_adapter, | |
187 | .detach_client = fschmd_detach_client, | |
188 | }; | |
189 | ||
190 | /* | |
191 | * Client data (each client gets its own) | |
192 | */ | |
193 | ||
194 | struct fschmd_data { | |
195 | struct i2c_client client; | |
196 | struct device *hwmon_dev; | |
197 | struct mutex update_lock; | |
198 | int kind; | |
199 | char valid; /* zero until following fields are valid */ | |
200 | unsigned long last_updated; /* in jiffies */ | |
201 | ||
202 | /* register values */ | |
203 | u8 global_control; /* global control register */ | |
204 | u8 volt[3]; /* 12, 5, battery voltage */ | |
205 | u8 temp_act[5]; /* temperature */ | |
206 | u8 temp_status[5]; /* status of sensor */ | |
207 | u8 temp_max[5]; /* high temp limit, notice: undocumented! */ | |
208 | u8 fan_act[6]; /* fans revolutions per second */ | |
209 | u8 fan_status[6]; /* fan status */ | |
210 | u8 fan_min[6]; /* fan min value for rps */ | |
211 | u8 fan_ripple[6]; /* divider for rps */ | |
212 | }; | |
213 | ||
7845cd79 HG |
214 | /* Global variables to hold information read from special DMI tables, which are |
215 | available on FSC machines with an fscher or later chip. */ | |
216 | static int dmi_mult[3] = { 490, 200, 100 }; | |
217 | static int dmi_offset[3] = { 0, 0, 0 }; | |
218 | static int dmi_vref = -1; | |
219 | ||
220 | ||
569ff102 HG |
221 | /* |
222 | * Sysfs attr show / store functions | |
223 | */ | |
224 | ||
225 | static ssize_t show_in_value(struct device *dev, | |
226 | struct device_attribute *devattr, char *buf) | |
227 | { | |
228 | const int max_reading[3] = { 14200, 6600, 3300 }; | |
229 | int index = to_sensor_dev_attr(devattr)->index; | |
230 | struct fschmd_data *data = fschmd_update_device(dev); | |
231 | ||
7845cd79 HG |
232 | /* fscher / fschrc - 1 as data->kind is an array index, not a chips */ |
233 | if (data->kind == (fscher - 1) || data->kind >= (fschrc - 1)) | |
234 | return sprintf(buf, "%d\n", (data->volt[index] * dmi_vref * | |
235 | dmi_mult[index]) / 255 + dmi_offset[index]); | |
236 | else | |
237 | return sprintf(buf, "%d\n", (data->volt[index] * | |
238 | max_reading[index] + 128) / 255); | |
569ff102 HG |
239 | } |
240 | ||
241 | ||
242 | #define TEMP_FROM_REG(val) (((val) - 128) * 1000) | |
243 | ||
244 | static ssize_t show_temp_value(struct device *dev, | |
245 | struct device_attribute *devattr, char *buf) | |
246 | { | |
247 | int index = to_sensor_dev_attr(devattr)->index; | |
248 | struct fschmd_data *data = fschmd_update_device(dev); | |
249 | ||
250 | return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_act[index])); | |
251 | } | |
252 | ||
253 | static ssize_t show_temp_max(struct device *dev, | |
254 | struct device_attribute *devattr, char *buf) | |
255 | { | |
256 | int index = to_sensor_dev_attr(devattr)->index; | |
257 | struct fschmd_data *data = fschmd_update_device(dev); | |
258 | ||
259 | return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[index])); | |
260 | } | |
261 | ||
262 | static ssize_t store_temp_max(struct device *dev, struct device_attribute | |
263 | *devattr, const char *buf, size_t count) | |
264 | { | |
265 | int index = to_sensor_dev_attr(devattr)->index; | |
266 | struct fschmd_data *data = dev_get_drvdata(dev); | |
267 | long v = simple_strtol(buf, NULL, 10) / 1000; | |
268 | ||
269 | v = SENSORS_LIMIT(v, -128, 127) + 128; | |
270 | ||
271 | mutex_lock(&data->update_lock); | |
272 | i2c_smbus_write_byte_data(&data->client, | |
273 | FSCHMD_REG_TEMP_LIMIT[data->kind][index], v); | |
274 | data->temp_max[index] = v; | |
275 | mutex_unlock(&data->update_lock); | |
276 | ||
277 | return count; | |
278 | } | |
279 | ||
280 | static ssize_t show_temp_fault(struct device *dev, | |
281 | struct device_attribute *devattr, char *buf) | |
282 | { | |
283 | int index = to_sensor_dev_attr(devattr)->index; | |
284 | struct fschmd_data *data = fschmd_update_device(dev); | |
285 | ||
286 | /* bit 0 set means sensor working ok, so no fault! */ | |
287 | if (data->temp_status[index] & FSCHMD_TEMP_WORKING_MASK) | |
288 | return sprintf(buf, "0\n"); | |
289 | else | |
290 | return sprintf(buf, "1\n"); | |
291 | } | |
292 | ||
293 | static ssize_t show_temp_alarm(struct device *dev, | |
294 | struct device_attribute *devattr, char *buf) | |
295 | { | |
296 | int index = to_sensor_dev_attr(devattr)->index; | |
297 | struct fschmd_data *data = fschmd_update_device(dev); | |
298 | ||
299 | if ((data->temp_status[index] & FSCHMD_TEMP_ALARM_MASK) == | |
300 | FSCHMD_TEMP_ALARM_MASK) | |
301 | return sprintf(buf, "1\n"); | |
302 | else | |
303 | return sprintf(buf, "0\n"); | |
304 | } | |
305 | ||
306 | ||
307 | #define RPM_FROM_REG(val) ((val) * 60) | |
308 | ||
309 | static ssize_t show_fan_value(struct device *dev, | |
310 | struct device_attribute *devattr, char *buf) | |
311 | { | |
312 | int index = to_sensor_dev_attr(devattr)->index; | |
313 | struct fschmd_data *data = fschmd_update_device(dev); | |
314 | ||
315 | return sprintf(buf, "%u\n", RPM_FROM_REG(data->fan_act[index])); | |
316 | } | |
317 | ||
318 | static ssize_t show_fan_div(struct device *dev, | |
319 | struct device_attribute *devattr, char *buf) | |
320 | { | |
321 | int index = to_sensor_dev_attr(devattr)->index; | |
322 | struct fschmd_data *data = fschmd_update_device(dev); | |
323 | ||
324 | /* bits 2..7 reserved => mask with 3 */ | |
325 | return sprintf(buf, "%d\n", 1 << (data->fan_ripple[index] & 3)); | |
326 | } | |
327 | ||
328 | static ssize_t store_fan_div(struct device *dev, struct device_attribute | |
329 | *devattr, const char *buf, size_t count) | |
330 | { | |
331 | u8 reg; | |
332 | int index = to_sensor_dev_attr(devattr)->index; | |
333 | struct fschmd_data *data = dev_get_drvdata(dev); | |
334 | /* supported values: 2, 4, 8 */ | |
335 | unsigned long v = simple_strtoul(buf, NULL, 10); | |
336 | ||
337 | switch (v) { | |
338 | case 2: v = 1; break; | |
339 | case 4: v = 2; break; | |
340 | case 8: v = 3; break; | |
341 | default: | |
342 | dev_err(dev, "fan_div value %lu not supported. " | |
343 | "Choose one of 2, 4 or 8!\n", v); | |
344 | return -EINVAL; | |
345 | } | |
346 | ||
347 | mutex_lock(&data->update_lock); | |
348 | ||
349 | reg = i2c_smbus_read_byte_data(&data->client, | |
350 | FSCHMD_REG_FAN_RIPPLE[data->kind][index]); | |
351 | ||
352 | /* bits 2..7 reserved => mask with 0x03 */ | |
353 | reg &= ~0x03; | |
354 | reg |= v; | |
355 | ||
356 | i2c_smbus_write_byte_data(&data->client, | |
357 | FSCHMD_REG_FAN_RIPPLE[data->kind][index], reg); | |
358 | ||
359 | data->fan_ripple[index] = reg; | |
360 | ||
361 | mutex_unlock(&data->update_lock); | |
362 | ||
363 | return count; | |
364 | } | |
365 | ||
366 | static ssize_t show_fan_alarm(struct device *dev, | |
367 | struct device_attribute *devattr, char *buf) | |
368 | { | |
369 | int index = to_sensor_dev_attr(devattr)->index; | |
370 | struct fschmd_data *data = fschmd_update_device(dev); | |
371 | ||
372 | if (data->fan_status[index] & FSCHMD_FAN_ALARM_MASK) | |
373 | return sprintf(buf, "1\n"); | |
374 | else | |
375 | return sprintf(buf, "0\n"); | |
376 | } | |
377 | ||
378 | static ssize_t show_fan_fault(struct device *dev, | |
379 | struct device_attribute *devattr, char *buf) | |
380 | { | |
381 | int index = to_sensor_dev_attr(devattr)->index; | |
382 | struct fschmd_data *data = fschmd_update_device(dev); | |
383 | ||
384 | if (data->fan_status[index] & FSCHMD_FAN_NOT_PRESENT_MASK) | |
385 | return sprintf(buf, "1\n"); | |
386 | else | |
387 | return sprintf(buf, "0\n"); | |
388 | } | |
389 | ||
390 | ||
391 | static ssize_t show_pwm_auto_point1_pwm(struct device *dev, | |
392 | struct device_attribute *devattr, char *buf) | |
393 | { | |
394 | int index = to_sensor_dev_attr(devattr)->index; | |
395 | int val = fschmd_update_device(dev)->fan_min[index]; | |
396 | ||
397 | /* 0 = allow turning off, 1-255 = 50-100% */ | |
398 | if (val) | |
399 | val = val / 2 + 128; | |
400 | ||
401 | return sprintf(buf, "%d\n", val); | |
402 | } | |
403 | ||
404 | static ssize_t store_pwm_auto_point1_pwm(struct device *dev, | |
405 | struct device_attribute *devattr, const char *buf, size_t count) | |
406 | { | |
407 | int index = to_sensor_dev_attr(devattr)->index; | |
408 | struct fschmd_data *data = dev_get_drvdata(dev); | |
409 | unsigned long v = simple_strtoul(buf, NULL, 10); | |
410 | ||
411 | /* register: 0 = allow turning off, 1-255 = 50-100% */ | |
412 | if (v) { | |
413 | v = SENSORS_LIMIT(v, 128, 255); | |
414 | v = (v - 128) * 2 + 1; | |
415 | } | |
416 | ||
417 | mutex_lock(&data->update_lock); | |
418 | ||
419 | i2c_smbus_write_byte_data(&data->client, | |
420 | FSCHMD_REG_FAN_MIN[data->kind][index], v); | |
421 | data->fan_min[index] = v; | |
422 | ||
423 | mutex_unlock(&data->update_lock); | |
424 | ||
425 | return count; | |
426 | } | |
427 | ||
428 | ||
429 | /* The FSC hwmon family has the ability to force an attached alert led to flash | |
430 | from software, we export this as an alert_led sysfs attr */ | |
431 | static ssize_t show_alert_led(struct device *dev, | |
432 | struct device_attribute *devattr, char *buf) | |
433 | { | |
434 | struct fschmd_data *data = fschmd_update_device(dev); | |
435 | ||
436 | if (data->global_control & FSCHMD_CONTROL_ALERT_LED_MASK) | |
437 | return sprintf(buf, "1\n"); | |
438 | else | |
439 | return sprintf(buf, "0\n"); | |
440 | } | |
441 | ||
442 | static ssize_t store_alert_led(struct device *dev, | |
443 | struct device_attribute *devattr, const char *buf, size_t count) | |
444 | { | |
445 | u8 reg; | |
446 | struct fschmd_data *data = dev_get_drvdata(dev); | |
447 | unsigned long v = simple_strtoul(buf, NULL, 10); | |
448 | ||
449 | mutex_lock(&data->update_lock); | |
450 | ||
451 | reg = i2c_smbus_read_byte_data(&data->client, FSCHMD_REG_CONTROL); | |
452 | ||
453 | if (v) | |
454 | reg |= FSCHMD_CONTROL_ALERT_LED_MASK; | |
455 | else | |
456 | reg &= ~FSCHMD_CONTROL_ALERT_LED_MASK; | |
457 | ||
458 | i2c_smbus_write_byte_data(&data->client, FSCHMD_REG_CONTROL, reg); | |
459 | ||
460 | data->global_control = reg; | |
461 | ||
462 | mutex_unlock(&data->update_lock); | |
463 | ||
464 | return count; | |
465 | } | |
466 | ||
467 | static struct sensor_device_attribute fschmd_attr[] = { | |
468 | SENSOR_ATTR(in0_input, 0444, show_in_value, NULL, 0), | |
469 | SENSOR_ATTR(in1_input, 0444, show_in_value, NULL, 1), | |
470 | SENSOR_ATTR(in2_input, 0444, show_in_value, NULL, 2), | |
471 | SENSOR_ATTR(alert_led, 0644, show_alert_led, store_alert_led, 0), | |
472 | }; | |
473 | ||
474 | static struct sensor_device_attribute fschmd_temp_attr[] = { | |
475 | SENSOR_ATTR(temp1_input, 0444, show_temp_value, NULL, 0), | |
476 | SENSOR_ATTR(temp1_max, 0644, show_temp_max, store_temp_max, 0), | |
477 | SENSOR_ATTR(temp1_fault, 0444, show_temp_fault, NULL, 0), | |
478 | SENSOR_ATTR(temp1_alarm, 0444, show_temp_alarm, NULL, 0), | |
479 | SENSOR_ATTR(temp2_input, 0444, show_temp_value, NULL, 1), | |
480 | SENSOR_ATTR(temp2_max, 0644, show_temp_max, store_temp_max, 1), | |
481 | SENSOR_ATTR(temp2_fault, 0444, show_temp_fault, NULL, 1), | |
482 | SENSOR_ATTR(temp2_alarm, 0444, show_temp_alarm, NULL, 1), | |
483 | SENSOR_ATTR(temp3_input, 0444, show_temp_value, NULL, 2), | |
484 | SENSOR_ATTR(temp3_max, 0644, show_temp_max, store_temp_max, 2), | |
485 | SENSOR_ATTR(temp3_fault, 0444, show_temp_fault, NULL, 2), | |
486 | SENSOR_ATTR(temp3_alarm, 0444, show_temp_alarm, NULL, 2), | |
487 | SENSOR_ATTR(temp4_input, 0444, show_temp_value, NULL, 3), | |
488 | SENSOR_ATTR(temp4_max, 0644, show_temp_max, store_temp_max, 3), | |
489 | SENSOR_ATTR(temp4_fault, 0444, show_temp_fault, NULL, 3), | |
490 | SENSOR_ATTR(temp4_alarm, 0444, show_temp_alarm, NULL, 3), | |
491 | SENSOR_ATTR(temp5_input, 0444, show_temp_value, NULL, 4), | |
492 | SENSOR_ATTR(temp5_max, 0644, show_temp_max, store_temp_max, 4), | |
493 | SENSOR_ATTR(temp5_fault, 0444, show_temp_fault, NULL, 4), | |
494 | SENSOR_ATTR(temp5_alarm, 0444, show_temp_alarm, NULL, 4), | |
495 | }; | |
496 | ||
497 | static struct sensor_device_attribute fschmd_fan_attr[] = { | |
498 | SENSOR_ATTR(fan1_input, 0444, show_fan_value, NULL, 0), | |
499 | SENSOR_ATTR(fan1_div, 0644, show_fan_div, store_fan_div, 0), | |
500 | SENSOR_ATTR(fan1_alarm, 0444, show_fan_alarm, NULL, 0), | |
501 | SENSOR_ATTR(fan1_fault, 0444, show_fan_fault, NULL, 0), | |
502 | SENSOR_ATTR(pwm1_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm, | |
503 | store_pwm_auto_point1_pwm, 0), | |
504 | SENSOR_ATTR(fan2_input, 0444, show_fan_value, NULL, 1), | |
505 | SENSOR_ATTR(fan2_div, 0644, show_fan_div, store_fan_div, 1), | |
506 | SENSOR_ATTR(fan2_alarm, 0444, show_fan_alarm, NULL, 1), | |
507 | SENSOR_ATTR(fan2_fault, 0444, show_fan_fault, NULL, 1), | |
508 | SENSOR_ATTR(pwm2_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm, | |
509 | store_pwm_auto_point1_pwm, 1), | |
510 | SENSOR_ATTR(fan3_input, 0444, show_fan_value, NULL, 2), | |
511 | SENSOR_ATTR(fan3_div, 0644, show_fan_div, store_fan_div, 2), | |
512 | SENSOR_ATTR(fan3_alarm, 0444, show_fan_alarm, NULL, 2), | |
513 | SENSOR_ATTR(fan3_fault, 0444, show_fan_fault, NULL, 2), | |
514 | SENSOR_ATTR(pwm3_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm, | |
515 | store_pwm_auto_point1_pwm, 2), | |
516 | SENSOR_ATTR(fan4_input, 0444, show_fan_value, NULL, 3), | |
517 | SENSOR_ATTR(fan4_div, 0644, show_fan_div, store_fan_div, 3), | |
518 | SENSOR_ATTR(fan4_alarm, 0444, show_fan_alarm, NULL, 3), | |
519 | SENSOR_ATTR(fan4_fault, 0444, show_fan_fault, NULL, 3), | |
520 | SENSOR_ATTR(pwm4_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm, | |
521 | store_pwm_auto_point1_pwm, 3), | |
522 | SENSOR_ATTR(fan5_input, 0444, show_fan_value, NULL, 4), | |
523 | SENSOR_ATTR(fan5_div, 0644, show_fan_div, store_fan_div, 4), | |
524 | SENSOR_ATTR(fan5_alarm, 0444, show_fan_alarm, NULL, 4), | |
525 | SENSOR_ATTR(fan5_fault, 0444, show_fan_fault, NULL, 4), | |
526 | SENSOR_ATTR(pwm5_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm, | |
527 | store_pwm_auto_point1_pwm, 4), | |
528 | SENSOR_ATTR(fan6_input, 0444, show_fan_value, NULL, 5), | |
529 | SENSOR_ATTR(fan6_div, 0644, show_fan_div, store_fan_div, 5), | |
530 | SENSOR_ATTR(fan6_alarm, 0444, show_fan_alarm, NULL, 5), | |
531 | SENSOR_ATTR(fan6_fault, 0444, show_fan_fault, NULL, 5), | |
532 | SENSOR_ATTR(pwm6_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm, | |
533 | store_pwm_auto_point1_pwm, 5), | |
534 | }; | |
535 | ||
536 | ||
537 | /* | |
538 | * Real code | |
539 | */ | |
540 | ||
7845cd79 HG |
541 | /* DMI decode routine to read voltage scaling factors from special DMI tables, |
542 | which are available on FSC machines with an fscher or later chip. */ | |
543 | static void fschmd_dmi_decode(const struct dmi_header *header) | |
544 | { | |
545 | int i, mult[3] = { 0 }, offset[3] = { 0 }, vref = 0, found = 0; | |
546 | ||
547 | /* dmi code ugliness, we get passed the address of the contents of | |
548 | a complete DMI record, but in the form of a dmi_header pointer, in | |
549 | reality this address holds header->length bytes of which the header | |
550 | are the first 4 bytes */ | |
551 | u8 *dmi_data = (u8 *)header; | |
552 | ||
553 | /* We are looking for OEM-specific type 185 */ | |
554 | if (header->type != 185) | |
555 | return; | |
556 | ||
557 | /* we are looking for what Siemens calls "subtype" 19, the subtype | |
558 | is stored in byte 5 of the dmi block */ | |
559 | if (header->length < 5 || dmi_data[4] != 19) | |
560 | return; | |
561 | ||
562 | /* After the subtype comes 1 unknown byte and then blocks of 5 bytes, | |
563 | consisting of what Siemens calls an "Entity" number, followed by | |
564 | 2 16-bit words in LSB first order */ | |
565 | for (i = 6; (i + 4) < header->length; i += 5) { | |
566 | /* entity 1 - 3: voltage multiplier and offset */ | |
567 | if (dmi_data[i] >= 1 && dmi_data[i] <= 3) { | |
568 | /* Our in sensors order and the DMI order differ */ | |
569 | const int shuffle[3] = { 1, 0, 2 }; | |
570 | int in = shuffle[dmi_data[i] - 1]; | |
571 | ||
572 | /* Check for twice the same entity */ | |
573 | if (found & (1 << in)) | |
574 | return; | |
575 | ||
576 | mult[in] = dmi_data[i + 1] | (dmi_data[i + 2] << 8); | |
577 | offset[in] = dmi_data[i + 3] | (dmi_data[i + 4] << 8); | |
578 | ||
579 | found |= 1 << in; | |
580 | } | |
581 | ||
582 | /* entity 7: reference voltage */ | |
583 | if (dmi_data[i] == 7) { | |
584 | /* Check for twice the same entity */ | |
585 | if (found & 0x08) | |
586 | return; | |
587 | ||
588 | vref = dmi_data[i + 1] | (dmi_data[i + 2] << 8); | |
589 | ||
590 | found |= 0x08; | |
591 | } | |
592 | } | |
593 | ||
594 | if (found == 0x0F) { | |
595 | for (i = 0; i < 3; i++) { | |
596 | dmi_mult[i] = mult[i] * 10; | |
597 | dmi_offset[i] = offset[i] * 10; | |
598 | } | |
599 | dmi_vref = vref; | |
600 | } | |
601 | } | |
602 | ||
569ff102 HG |
603 | static int fschmd_detect(struct i2c_adapter *adapter, int address, int kind) |
604 | { | |
605 | struct i2c_client *client; | |
606 | struct fschmd_data *data; | |
607 | u8 revision; | |
608 | const char * const names[5] = { "Poseidon", "Hermes", "Scylla", | |
609 | "Heracles", "Heimdall" }; | |
610 | const char * const client_names[5] = { "fscpos", "fscher", "fscscy", | |
611 | "fschrc", "fschmd" }; | |
612 | int i, err = 0; | |
613 | ||
614 | if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) | |
615 | return 0; | |
616 | ||
617 | /* OK. For now, we presume we have a valid client. We now create the | |
618 | * client structure, even though we cannot fill it completely yet. | |
619 | * But it allows us to access i2c_smbus_read_byte_data. */ | |
620 | if (!(data = kzalloc(sizeof(struct fschmd_data), GFP_KERNEL))) | |
621 | return -ENOMEM; | |
622 | ||
623 | client = &data->client; | |
624 | i2c_set_clientdata(client, data); | |
625 | client->addr = address; | |
626 | client->adapter = adapter; | |
627 | client->driver = &fschmd_driver; | |
628 | mutex_init(&data->update_lock); | |
629 | ||
630 | /* Detect & Identify the chip */ | |
631 | if (kind <= 0) { | |
632 | char id[4]; | |
633 | ||
634 | id[0] = i2c_smbus_read_byte_data(client, | |
635 | FSCHMD_REG_IDENT_0); | |
636 | id[1] = i2c_smbus_read_byte_data(client, | |
637 | FSCHMD_REG_IDENT_1); | |
638 | id[2] = i2c_smbus_read_byte_data(client, | |
639 | FSCHMD_REG_IDENT_2); | |
640 | id[3] = '\0'; | |
641 | ||
642 | if (!strcmp(id, "PEG")) | |
643 | kind = fscpos; | |
644 | else if (!strcmp(id, "HER")) | |
645 | kind = fscher; | |
646 | else if (!strcmp(id, "SCY")) | |
647 | kind = fscscy; | |
648 | else if (!strcmp(id, "HRC")) | |
649 | kind = fschrc; | |
650 | else if (!strcmp(id, "HMD")) | |
651 | kind = fschmd; | |
652 | else | |
653 | goto exit_free; | |
654 | } | |
655 | ||
656 | if (kind == fscpos) { | |
657 | /* The Poseidon has hardwired temp limits, fill these | |
658 | in for the alarm resetting code */ | |
659 | data->temp_max[0] = 70 + 128; | |
660 | data->temp_max[1] = 50 + 128; | |
661 | data->temp_max[2] = 50 + 128; | |
662 | } | |
663 | ||
7845cd79 HG |
664 | /* Read the special DMI table for fscher and newer chips */ |
665 | if (kind == fscher || kind >= fschrc) { | |
666 | dmi_walk(fschmd_dmi_decode); | |
667 | if (dmi_vref == -1) { | |
668 | printk(KERN_WARNING FSCHMD_NAME | |
669 | ": Couldn't get voltage scaling factors from " | |
670 | "BIOS DMI table, using builtin defaults\n"); | |
671 | dmi_vref = 33; | |
672 | } | |
673 | } | |
674 | ||
569ff102 HG |
675 | /* i2c kind goes from 1-5, we want from 0-4 to address arrays */ |
676 | data->kind = kind - 1; | |
677 | strlcpy(client->name, client_names[data->kind], I2C_NAME_SIZE); | |
678 | ||
679 | /* Tell the I2C layer a new client has arrived */ | |
680 | if ((err = i2c_attach_client(client))) | |
681 | goto exit_free; | |
682 | ||
683 | for (i = 0; i < ARRAY_SIZE(fschmd_attr); i++) { | |
684 | err = device_create_file(&client->dev, | |
685 | &fschmd_attr[i].dev_attr); | |
686 | if (err) | |
687 | goto exit_detach; | |
688 | } | |
689 | ||
690 | for (i = 0; i < (FSCHMD_NO_TEMP_SENSORS[data->kind] * 4); i++) { | |
691 | /* Poseidon doesn't have TEMP_LIMIT registers */ | |
692 | if (kind == fscpos && fschmd_temp_attr[i].dev_attr.show == | |
693 | show_temp_max) | |
694 | continue; | |
695 | ||
696 | err = device_create_file(&client->dev, | |
697 | &fschmd_temp_attr[i].dev_attr); | |
698 | if (err) | |
699 | goto exit_detach; | |
700 | } | |
701 | ||
702 | for (i = 0; i < (FSCHMD_NO_FAN_SENSORS[data->kind] * 5); i++) { | |
703 | /* Poseidon doesn't have a FAN_MIN register for its 3rd fan */ | |
704 | if (kind == fscpos && | |
705 | !strcmp(fschmd_fan_attr[i].dev_attr.attr.name, | |
706 | "pwm3_auto_point1_pwm")) | |
707 | continue; | |
708 | ||
709 | err = device_create_file(&client->dev, | |
710 | &fschmd_fan_attr[i].dev_attr); | |
711 | if (err) | |
712 | goto exit_detach; | |
713 | } | |
714 | ||
715 | data->hwmon_dev = hwmon_device_register(&client->dev); | |
716 | if (IS_ERR(data->hwmon_dev)) { | |
717 | err = PTR_ERR(data->hwmon_dev); | |
718 | data->hwmon_dev = NULL; | |
719 | goto exit_detach; | |
720 | } | |
721 | ||
722 | revision = i2c_smbus_read_byte_data(client, FSCHMD_REG_REVISION); | |
723 | printk(KERN_INFO FSCHMD_NAME ": Detected FSC %s chip, revision: %d\n", | |
724 | names[data->kind], (int) revision); | |
725 | ||
726 | return 0; | |
727 | ||
728 | exit_detach: | |
729 | fschmd_detach_client(client); /* will also free data for us */ | |
730 | return err; | |
731 | ||
732 | exit_free: | |
733 | kfree(data); | |
734 | return err; | |
735 | } | |
736 | ||
737 | static int fschmd_attach_adapter(struct i2c_adapter *adapter) | |
738 | { | |
739 | if (!(adapter->class & I2C_CLASS_HWMON)) | |
740 | return 0; | |
741 | return i2c_probe(adapter, &addr_data, fschmd_detect); | |
742 | } | |
743 | ||
744 | static int fschmd_detach_client(struct i2c_client *client) | |
745 | { | |
746 | struct fschmd_data *data = i2c_get_clientdata(client); | |
747 | int i, err; | |
748 | ||
749 | /* Check if registered in case we're called from fschmd_detect | |
750 | to cleanup after an error */ | |
751 | if (data->hwmon_dev) | |
752 | hwmon_device_unregister(data->hwmon_dev); | |
753 | ||
754 | for (i = 0; i < ARRAY_SIZE(fschmd_attr); i++) | |
755 | device_remove_file(&client->dev, &fschmd_attr[i].dev_attr); | |
756 | for (i = 0; i < (FSCHMD_NO_TEMP_SENSORS[data->kind] * 4); i++) | |
757 | device_remove_file(&client->dev, | |
758 | &fschmd_temp_attr[i].dev_attr); | |
759 | for (i = 0; i < (FSCHMD_NO_FAN_SENSORS[data->kind] * 5); i++) | |
760 | device_remove_file(&client->dev, | |
761 | &fschmd_fan_attr[i].dev_attr); | |
762 | ||
763 | if ((err = i2c_detach_client(client))) | |
764 | return err; | |
765 | ||
766 | kfree(data); | |
767 | return 0; | |
768 | } | |
769 | ||
770 | static struct fschmd_data *fschmd_update_device(struct device *dev) | |
771 | { | |
772 | struct i2c_client *client = to_i2c_client(dev); | |
773 | struct fschmd_data *data = i2c_get_clientdata(client); | |
774 | int i; | |
775 | ||
776 | mutex_lock(&data->update_lock); | |
777 | ||
778 | if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) { | |
779 | ||
780 | for (i = 0; i < FSCHMD_NO_TEMP_SENSORS[data->kind]; i++) { | |
781 | data->temp_act[i] = i2c_smbus_read_byte_data(client, | |
782 | FSCHMD_REG_TEMP_ACT[data->kind][i]); | |
783 | data->temp_status[i] = i2c_smbus_read_byte_data(client, | |
784 | FSCHMD_REG_TEMP_STATE[data->kind][i]); | |
785 | ||
786 | /* The fscpos doesn't have TEMP_LIMIT registers */ | |
787 | if (FSCHMD_REG_TEMP_LIMIT[data->kind][i]) | |
788 | data->temp_max[i] = i2c_smbus_read_byte_data( | |
789 | client, | |
790 | FSCHMD_REG_TEMP_LIMIT[data->kind][i]); | |
791 | ||
792 | /* reset alarm if the alarm condition is gone, | |
793 | the chip doesn't do this itself */ | |
794 | if ((data->temp_status[i] & FSCHMD_TEMP_ALARM_MASK) == | |
795 | FSCHMD_TEMP_ALARM_MASK && | |
796 | data->temp_act[i] < data->temp_max[i]) | |
797 | i2c_smbus_write_byte_data(client, | |
798 | FSCHMD_REG_TEMP_STATE[data->kind][i], | |
799 | FSCHMD_TEMP_ALERT_MASK); | |
800 | } | |
801 | ||
802 | for (i = 0; i < FSCHMD_NO_FAN_SENSORS[data->kind]; i++) { | |
803 | data->fan_act[i] = i2c_smbus_read_byte_data(client, | |
804 | FSCHMD_REG_FAN_ACT[data->kind][i]); | |
805 | data->fan_status[i] = i2c_smbus_read_byte_data(client, | |
806 | FSCHMD_REG_FAN_STATE[data->kind][i]); | |
807 | data->fan_ripple[i] = i2c_smbus_read_byte_data(client, | |
808 | FSCHMD_REG_FAN_RIPPLE[data->kind][i]); | |
809 | ||
810 | /* The fscpos third fan doesn't have a fan_min */ | |
811 | if (FSCHMD_REG_FAN_MIN[data->kind][i]) | |
812 | data->fan_min[i] = i2c_smbus_read_byte_data( | |
813 | client, | |
814 | FSCHMD_REG_FAN_MIN[data->kind][i]); | |
815 | ||
816 | /* reset fan status if speed is back to > 0 */ | |
817 | if ((data->fan_status[i] & FSCHMD_FAN_ALARM_MASK) && | |
818 | data->fan_act[i]) | |
819 | i2c_smbus_write_byte_data(client, | |
820 | FSCHMD_REG_FAN_STATE[data->kind][i], | |
821 | FSCHMD_FAN_ALARM_MASK); | |
822 | } | |
823 | ||
824 | for (i = 0; i < 3; i++) | |
825 | data->volt[i] = i2c_smbus_read_byte_data(client, | |
826 | FSCHMD_REG_VOLT[i]); | |
827 | ||
828 | data->global_control = i2c_smbus_read_byte_data(client, | |
829 | FSCHMD_REG_CONTROL); | |
830 | ||
831 | /* To be implemented in the future | |
832 | data->watchdog[0] = i2c_smbus_read_byte_data(client, | |
833 | FSCHMD_REG_WDOG_PRESET); | |
834 | data->watchdog[1] = i2c_smbus_read_byte_data(client, | |
835 | FSCHMD_REG_WDOG_STATE); | |
836 | data->watchdog[2] = i2c_smbus_read_byte_data(client, | |
837 | FSCHMD_REG_WDOG_CONTROL); */ | |
838 | ||
839 | data->last_updated = jiffies; | |
840 | data->valid = 1; | |
841 | } | |
842 | ||
843 | mutex_unlock(&data->update_lock); | |
844 | ||
845 | return data; | |
846 | } | |
847 | ||
848 | static int __init fschmd_init(void) | |
849 | { | |
850 | return i2c_add_driver(&fschmd_driver); | |
851 | } | |
852 | ||
853 | static void __exit fschmd_exit(void) | |
854 | { | |
855 | i2c_del_driver(&fschmd_driver); | |
856 | } | |
857 | ||
858 | MODULE_AUTHOR("Hans de Goede <j.w.r.degoede@hhs.nl>"); | |
859 | MODULE_DESCRIPTION("FSC Poseidon, Hermes, Scylla, Heracles and " | |
860 | "Heimdall driver"); | |
861 | MODULE_LICENSE("GPL"); | |
862 | ||
863 | module_init(fschmd_init); | |
864 | module_exit(fschmd_exit); |