Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * lm63.c - driver for the National Semiconductor LM63 temperature sensor | |
3 | * with integrated fan control | |
bc51ae11 | 4 | * Copyright (C) 2004-2005 Jean Delvare <khali@linux-fr.org> |
1da177e4 LT |
5 | * Based on the lm90 driver. |
6 | * | |
7 | * The LM63 is a sensor chip made by National Semiconductor. It measures | |
8 | * two temperatures (its own and one external one) and the speed of one | |
9 | * fan, those speed it can additionally control. Complete datasheet can be | |
10 | * obtained from National's website at: | |
11 | * http://www.national.com/pf/LM/LM63.html | |
12 | * | |
13 | * The LM63 is basically an LM86 with fan speed monitoring and control | |
14 | * capabilities added. It misses some of the LM86 features though: | |
15 | * - No low limit for local temperature. | |
16 | * - No critical limit for local temperature. | |
17 | * - Critical limit for remote temperature can be changed only once. We | |
18 | * will consider that the critical limit is read-only. | |
19 | * | |
20 | * The datasheet isn't very clear about what the tachometer reading is. | |
21 | * I had a explanation from National Semiconductor though. The two lower | |
22 | * bits of the read value have to be masked out. The value is still 16 bit | |
23 | * in width. | |
24 | * | |
25 | * This program is free software; you can redistribute it and/or modify | |
26 | * it under the terms of the GNU General Public License as published by | |
27 | * the Free Software Foundation; either version 2 of the License, or | |
28 | * (at your option) any later version. | |
29 | * | |
30 | * This program is distributed in the hope that it will be useful, | |
31 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
32 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
33 | * GNU General Public License for more details. | |
34 | * | |
35 | * You should have received a copy of the GNU General Public License | |
36 | * along with this program; if not, write to the Free Software | |
37 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
38 | */ | |
39 | ||
1da177e4 LT |
40 | #include <linux/module.h> |
41 | #include <linux/init.h> | |
42 | #include <linux/slab.h> | |
43 | #include <linux/jiffies.h> | |
44 | #include <linux/i2c.h> | |
10c08f81 | 45 | #include <linux/hwmon-sysfs.h> |
943b0830 MH |
46 | #include <linux/hwmon.h> |
47 | #include <linux/err.h> | |
1da177e4 LT |
48 | |
49 | /* | |
50 | * Addresses to scan | |
51 | * Address is fully defined internally and cannot be changed. | |
52 | */ | |
53 | ||
54 | static unsigned short normal_i2c[] = { 0x4c, I2C_CLIENT_END }; | |
1da177e4 LT |
55 | |
56 | /* | |
57 | * Insmod parameters | |
58 | */ | |
59 | ||
f4b50261 | 60 | I2C_CLIENT_INSMOD_1(lm63); |
1da177e4 LT |
61 | |
62 | /* | |
63 | * The LM63 registers | |
64 | */ | |
65 | ||
66 | #define LM63_REG_CONFIG1 0x03 | |
67 | #define LM63_REG_CONFIG2 0xBF | |
68 | #define LM63_REG_CONFIG_FAN 0x4A | |
69 | ||
70 | #define LM63_REG_TACH_COUNT_MSB 0x47 | |
71 | #define LM63_REG_TACH_COUNT_LSB 0x46 | |
72 | #define LM63_REG_TACH_LIMIT_MSB 0x49 | |
73 | #define LM63_REG_TACH_LIMIT_LSB 0x48 | |
74 | ||
75 | #define LM63_REG_PWM_VALUE 0x4C | |
76 | #define LM63_REG_PWM_FREQ 0x4D | |
77 | ||
78 | #define LM63_REG_LOCAL_TEMP 0x00 | |
79 | #define LM63_REG_LOCAL_HIGH 0x05 | |
80 | ||
81 | #define LM63_REG_REMOTE_TEMP_MSB 0x01 | |
82 | #define LM63_REG_REMOTE_TEMP_LSB 0x10 | |
83 | #define LM63_REG_REMOTE_OFFSET_MSB 0x11 | |
84 | #define LM63_REG_REMOTE_OFFSET_LSB 0x12 | |
85 | #define LM63_REG_REMOTE_HIGH_MSB 0x07 | |
86 | #define LM63_REG_REMOTE_HIGH_LSB 0x13 | |
87 | #define LM63_REG_REMOTE_LOW_MSB 0x08 | |
88 | #define LM63_REG_REMOTE_LOW_LSB 0x14 | |
89 | #define LM63_REG_REMOTE_TCRIT 0x19 | |
90 | #define LM63_REG_REMOTE_TCRIT_HYST 0x21 | |
91 | ||
92 | #define LM63_REG_ALERT_STATUS 0x02 | |
93 | #define LM63_REG_ALERT_MASK 0x16 | |
94 | ||
95 | #define LM63_REG_MAN_ID 0xFE | |
96 | #define LM63_REG_CHIP_ID 0xFF | |
97 | ||
98 | /* | |
99 | * Conversions and various macros | |
100 | * For tachometer counts, the LM63 uses 16-bit values. | |
101 | * For local temperature and high limit, remote critical limit and hysteresis | |
44bbe87e | 102 | * value, it uses signed 8-bit values with LSB = 1 degree Celsius. |
1da177e4 | 103 | * For remote temperature, low and high limits, it uses signed 11-bit values |
44bbe87e | 104 | * with LSB = 0.125 degree Celsius, left-justified in 16-bit registers. |
1da177e4 LT |
105 | */ |
106 | ||
107 | #define FAN_FROM_REG(reg) ((reg) == 0xFFFC || (reg) == 0 ? 0 : \ | |
108 | 5400000 / (reg)) | |
109 | #define FAN_TO_REG(val) ((val) <= 82 ? 0xFFFC : \ | |
110 | (5400000 / (val)) & 0xFFFC) | |
111 | #define TEMP8_FROM_REG(reg) ((reg) * 1000) | |
112 | #define TEMP8_TO_REG(val) ((val) <= -128000 ? -128 : \ | |
113 | (val) >= 127000 ? 127 : \ | |
114 | (val) < 0 ? ((val) - 500) / 1000 : \ | |
115 | ((val) + 500) / 1000) | |
116 | #define TEMP11_FROM_REG(reg) ((reg) / 32 * 125) | |
117 | #define TEMP11_TO_REG(val) ((val) <= -128000 ? 0x8000 : \ | |
118 | (val) >= 127875 ? 0x7FE0 : \ | |
119 | (val) < 0 ? ((val) - 62) / 125 * 32 : \ | |
120 | ((val) + 62) / 125 * 32) | |
121 | #define HYST_TO_REG(val) ((val) <= 0 ? 0 : \ | |
122 | (val) >= 127000 ? 127 : \ | |
123 | ((val) + 500) / 1000) | |
124 | ||
125 | /* | |
126 | * Functions declaration | |
127 | */ | |
128 | ||
129 | static int lm63_attach_adapter(struct i2c_adapter *adapter); | |
130 | static int lm63_detach_client(struct i2c_client *client); | |
131 | ||
132 | static struct lm63_data *lm63_update_device(struct device *dev); | |
133 | ||
134 | static int lm63_detect(struct i2c_adapter *adapter, int address, int kind); | |
135 | static void lm63_init_client(struct i2c_client *client); | |
136 | ||
137 | /* | |
138 | * Driver data (common to all clients) | |
139 | */ | |
140 | ||
141 | static struct i2c_driver lm63_driver = { | |
142 | .owner = THIS_MODULE, | |
143 | .name = "lm63", | |
144 | .flags = I2C_DF_NOTIFY, | |
145 | .attach_adapter = lm63_attach_adapter, | |
146 | .detach_client = lm63_detach_client, | |
147 | }; | |
148 | ||
149 | /* | |
150 | * Client data (each client gets its own) | |
151 | */ | |
152 | ||
153 | struct lm63_data { | |
154 | struct i2c_client client; | |
943b0830 | 155 | struct class_device *class_dev; |
1da177e4 LT |
156 | struct semaphore update_lock; |
157 | char valid; /* zero until following fields are valid */ | |
158 | unsigned long last_updated; /* in jiffies */ | |
159 | ||
160 | /* registers values */ | |
161 | u8 config, config_fan; | |
bc51ae11 JD |
162 | u16 fan[2]; /* 0: input |
163 | 1: low limit */ | |
1da177e4 LT |
164 | u8 pwm1_freq; |
165 | u8 pwm1_value; | |
bc51ae11 JD |
166 | s8 temp8[3]; /* 0: local input |
167 | 1: local high limit | |
168 | 2: remote critical limit */ | |
169 | s16 temp11[3]; /* 0: remote input | |
170 | 1: remote low limit | |
171 | 2: remote high limit */ | |
1da177e4 LT |
172 | u8 temp2_crit_hyst; |
173 | u8 alarms; | |
174 | }; | |
175 | ||
176 | /* | |
177 | * Sysfs callback functions and files | |
178 | */ | |
179 | ||
bc51ae11 JD |
180 | static ssize_t show_fan(struct device *dev, struct device_attribute *devattr, |
181 | char *buf) | |
182 | { | |
183 | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | |
184 | struct lm63_data *data = lm63_update_device(dev); | |
185 | return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[attr->index])); | |
1da177e4 | 186 | } |
1da177e4 | 187 | |
bc51ae11 JD |
188 | static ssize_t set_fan(struct device *dev, struct device_attribute *dummy, |
189 | const char *buf, size_t count) | |
1da177e4 LT |
190 | { |
191 | struct i2c_client *client = to_i2c_client(dev); | |
192 | struct lm63_data *data = i2c_get_clientdata(client); | |
193 | unsigned long val = simple_strtoul(buf, NULL, 10); | |
194 | ||
195 | down(&data->update_lock); | |
bc51ae11 | 196 | data->fan[1] = FAN_TO_REG(val); |
1da177e4 | 197 | i2c_smbus_write_byte_data(client, LM63_REG_TACH_LIMIT_LSB, |
bc51ae11 | 198 | data->fan[1] & 0xFF); |
1da177e4 | 199 | i2c_smbus_write_byte_data(client, LM63_REG_TACH_LIMIT_MSB, |
bc51ae11 | 200 | data->fan[1] >> 8); |
1da177e4 LT |
201 | up(&data->update_lock); |
202 | return count; | |
203 | } | |
204 | ||
bc51ae11 JD |
205 | static ssize_t show_pwm1(struct device *dev, struct device_attribute *dummy, |
206 | char *buf) | |
1da177e4 LT |
207 | { |
208 | struct lm63_data *data = lm63_update_device(dev); | |
209 | return sprintf(buf, "%d\n", data->pwm1_value >= 2 * data->pwm1_freq ? | |
210 | 255 : (data->pwm1_value * 255 + data->pwm1_freq) / | |
211 | (2 * data->pwm1_freq)); | |
212 | } | |
213 | ||
bc51ae11 JD |
214 | static ssize_t set_pwm1(struct device *dev, struct device_attribute *dummy, |
215 | const char *buf, size_t count) | |
1da177e4 LT |
216 | { |
217 | struct i2c_client *client = to_i2c_client(dev); | |
218 | struct lm63_data *data = i2c_get_clientdata(client); | |
219 | unsigned long val; | |
220 | ||
221 | if (!(data->config_fan & 0x20)) /* register is read-only */ | |
222 | return -EPERM; | |
223 | ||
224 | val = simple_strtoul(buf, NULL, 10); | |
225 | down(&data->update_lock); | |
226 | data->pwm1_value = val <= 0 ? 0 : | |
227 | val >= 255 ? 2 * data->pwm1_freq : | |
228 | (val * data->pwm1_freq * 2 + 127) / 255; | |
229 | i2c_smbus_write_byte_data(client, LM63_REG_PWM_VALUE, data->pwm1_value); | |
230 | up(&data->update_lock); | |
231 | return count; | |
232 | } | |
233 | ||
bc51ae11 JD |
234 | static ssize_t show_pwm1_enable(struct device *dev, struct device_attribute *dummy, |
235 | char *buf) | |
1da177e4 LT |
236 | { |
237 | struct lm63_data *data = lm63_update_device(dev); | |
238 | return sprintf(buf, "%d\n", data->config_fan & 0x20 ? 1 : 2); | |
239 | } | |
240 | ||
bc51ae11 JD |
241 | static ssize_t show_temp8(struct device *dev, struct device_attribute *devattr, |
242 | char *buf) | |
243 | { | |
244 | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | |
245 | struct lm63_data *data = lm63_update_device(dev); | |
246 | return sprintf(buf, "%d\n", TEMP8_FROM_REG(data->temp8[attr->index])); | |
1da177e4 | 247 | } |
bc51ae11 JD |
248 | |
249 | static ssize_t set_temp8(struct device *dev, struct device_attribute *dummy, | |
250 | const char *buf, size_t count) | |
251 | { | |
252 | struct i2c_client *client = to_i2c_client(dev); | |
253 | struct lm63_data *data = i2c_get_clientdata(client); | |
254 | long val = simple_strtol(buf, NULL, 10); | |
255 | ||
256 | down(&data->update_lock); | |
257 | data->temp8[1] = TEMP8_TO_REG(val); | |
258 | i2c_smbus_write_byte_data(client, LM63_REG_LOCAL_HIGH, data->temp8[1]); | |
259 | up(&data->update_lock); | |
260 | return count; | |
1da177e4 | 261 | } |
bc51ae11 JD |
262 | |
263 | static ssize_t show_temp11(struct device *dev, struct device_attribute *devattr, | |
264 | char *buf) | |
265 | { | |
266 | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | |
267 | struct lm63_data *data = lm63_update_device(dev); | |
268 | return sprintf(buf, "%d\n", TEMP11_FROM_REG(data->temp11[attr->index])); | |
1da177e4 | 269 | } |
bc51ae11 JD |
270 | |
271 | static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr, | |
272 | const char *buf, size_t count) | |
273 | { | |
274 | static const u8 reg[4] = { | |
275 | LM63_REG_REMOTE_LOW_MSB, | |
276 | LM63_REG_REMOTE_LOW_LSB, | |
277 | LM63_REG_REMOTE_HIGH_MSB, | |
278 | LM63_REG_REMOTE_HIGH_LSB, | |
279 | }; | |
280 | ||
281 | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | |
282 | struct i2c_client *client = to_i2c_client(dev); | |
283 | struct lm63_data *data = i2c_get_clientdata(client); | |
284 | long val = simple_strtol(buf, NULL, 10); | |
285 | int nr = attr->index; | |
286 | ||
287 | down(&data->update_lock); | |
288 | data->temp11[nr] = TEMP11_TO_REG(val); | |
289 | i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2], | |
290 | data->temp11[nr] >> 8); | |
291 | i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2 + 1], | |
292 | data->temp11[nr] & 0xff); | |
293 | up(&data->update_lock); | |
294 | return count; | |
1da177e4 | 295 | } |
1da177e4 LT |
296 | |
297 | /* Hysteresis register holds a relative value, while we want to present | |
298 | an absolute to user-space */ | |
bc51ae11 JD |
299 | static ssize_t show_temp2_crit_hyst(struct device *dev, struct device_attribute *dummy, |
300 | char *buf) | |
1da177e4 LT |
301 | { |
302 | struct lm63_data *data = lm63_update_device(dev); | |
bc51ae11 | 303 | return sprintf(buf, "%d\n", TEMP8_FROM_REG(data->temp8[2]) |
1da177e4 LT |
304 | - TEMP8_FROM_REG(data->temp2_crit_hyst)); |
305 | } | |
306 | ||
307 | /* And now the other way around, user-space provides an absolute | |
308 | hysteresis value and we have to store a relative one */ | |
bc51ae11 JD |
309 | static ssize_t set_temp2_crit_hyst(struct device *dev, struct device_attribute *dummy, |
310 | const char *buf, size_t count) | |
1da177e4 LT |
311 | { |
312 | struct i2c_client *client = to_i2c_client(dev); | |
313 | struct lm63_data *data = i2c_get_clientdata(client); | |
314 | long val = simple_strtol(buf, NULL, 10); | |
315 | long hyst; | |
316 | ||
317 | down(&data->update_lock); | |
bc51ae11 | 318 | hyst = TEMP8_FROM_REG(data->temp8[2]) - val; |
1da177e4 LT |
319 | i2c_smbus_write_byte_data(client, LM63_REG_REMOTE_TCRIT_HYST, |
320 | HYST_TO_REG(hyst)); | |
321 | up(&data->update_lock); | |
322 | return count; | |
323 | } | |
324 | ||
bc51ae11 JD |
325 | static ssize_t show_alarms(struct device *dev, struct device_attribute *dummy, |
326 | char *buf) | |
1da177e4 LT |
327 | { |
328 | struct lm63_data *data = lm63_update_device(dev); | |
329 | return sprintf(buf, "%u\n", data->alarms); | |
330 | } | |
331 | ||
bc51ae11 JD |
332 | static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0); |
333 | static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan, | |
334 | set_fan, 1); | |
1da177e4 LT |
335 | |
336 | static DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm1, set_pwm1); | |
337 | static DEVICE_ATTR(pwm1_enable, S_IRUGO, show_pwm1_enable, NULL); | |
338 | ||
bc51ae11 JD |
339 | static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp8, NULL, 0); |
340 | static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp8, | |
341 | set_temp8, 1); | |
1da177e4 | 342 | |
bc51ae11 JD |
343 | static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp11, NULL, 0); |
344 | static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp11, | |
345 | set_temp11, 1); | |
346 | static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp11, | |
347 | set_temp11, 2); | |
348 | static SENSOR_DEVICE_ATTR(temp2_crit, S_IRUGO, show_temp8, NULL, 2); | |
1da177e4 LT |
349 | static DEVICE_ATTR(temp2_crit_hyst, S_IWUSR | S_IRUGO, show_temp2_crit_hyst, |
350 | set_temp2_crit_hyst); | |
351 | ||
352 | static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); | |
353 | ||
354 | /* | |
355 | * Real code | |
356 | */ | |
357 | ||
358 | static int lm63_attach_adapter(struct i2c_adapter *adapter) | |
359 | { | |
360 | if (!(adapter->class & I2C_CLASS_HWMON)) | |
361 | return 0; | |
2ed2dc3c | 362 | return i2c_probe(adapter, &addr_data, lm63_detect); |
1da177e4 LT |
363 | } |
364 | ||
365 | /* | |
366 | * The following function does more than just detection. If detection | |
367 | * succeeds, it also registers the new chip. | |
368 | */ | |
369 | static int lm63_detect(struct i2c_adapter *adapter, int address, int kind) | |
370 | { | |
371 | struct i2c_client *new_client; | |
372 | struct lm63_data *data; | |
373 | int err = 0; | |
374 | ||
375 | if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) | |
376 | goto exit; | |
377 | ||
378 | if (!(data = kmalloc(sizeof(struct lm63_data), GFP_KERNEL))) { | |
379 | err = -ENOMEM; | |
380 | goto exit; | |
381 | } | |
382 | memset(data, 0, sizeof(struct lm63_data)); | |
383 | ||
384 | /* The common I2C client data is placed right before the | |
385 | LM63-specific data. */ | |
386 | new_client = &data->client; | |
387 | i2c_set_clientdata(new_client, data); | |
388 | new_client->addr = address; | |
389 | new_client->adapter = adapter; | |
390 | new_client->driver = &lm63_driver; | |
391 | new_client->flags = 0; | |
392 | ||
393 | /* Default to an LM63 if forced */ | |
394 | if (kind == 0) | |
395 | kind = lm63; | |
396 | ||
397 | if (kind < 0) { /* must identify */ | |
398 | u8 man_id, chip_id, reg_config1, reg_config2; | |
399 | u8 reg_alert_status, reg_alert_mask; | |
400 | ||
401 | man_id = i2c_smbus_read_byte_data(new_client, | |
402 | LM63_REG_MAN_ID); | |
403 | chip_id = i2c_smbus_read_byte_data(new_client, | |
404 | LM63_REG_CHIP_ID); | |
405 | reg_config1 = i2c_smbus_read_byte_data(new_client, | |
406 | LM63_REG_CONFIG1); | |
407 | reg_config2 = i2c_smbus_read_byte_data(new_client, | |
408 | LM63_REG_CONFIG2); | |
409 | reg_alert_status = i2c_smbus_read_byte_data(new_client, | |
410 | LM63_REG_ALERT_STATUS); | |
411 | reg_alert_mask = i2c_smbus_read_byte_data(new_client, | |
412 | LM63_REG_ALERT_MASK); | |
413 | ||
414 | if (man_id == 0x01 /* National Semiconductor */ | |
415 | && chip_id == 0x41 /* LM63 */ | |
416 | && (reg_config1 & 0x18) == 0x00 | |
417 | && (reg_config2 & 0xF8) == 0x00 | |
418 | && (reg_alert_status & 0x20) == 0x00 | |
419 | && (reg_alert_mask & 0xA4) == 0xA4) { | |
420 | kind = lm63; | |
421 | } else { /* failed */ | |
422 | dev_dbg(&adapter->dev, "Unsupported chip " | |
423 | "(man_id=0x%02X, chip_id=0x%02X).\n", | |
424 | man_id, chip_id); | |
425 | goto exit_free; | |
426 | } | |
427 | } | |
428 | ||
429 | strlcpy(new_client->name, "lm63", I2C_NAME_SIZE); | |
430 | data->valid = 0; | |
431 | init_MUTEX(&data->update_lock); | |
432 | ||
433 | /* Tell the I2C layer a new client has arrived */ | |
434 | if ((err = i2c_attach_client(new_client))) | |
435 | goto exit_free; | |
436 | ||
437 | /* Initialize the LM63 chip */ | |
438 | lm63_init_client(new_client); | |
439 | ||
440 | /* Register sysfs hooks */ | |
943b0830 MH |
441 | data->class_dev = hwmon_device_register(&new_client->dev); |
442 | if (IS_ERR(data->class_dev)) { | |
443 | err = PTR_ERR(data->class_dev); | |
444 | goto exit_detach; | |
445 | } | |
446 | ||
1da177e4 | 447 | if (data->config & 0x04) { /* tachometer enabled */ |
bc51ae11 JD |
448 | device_create_file(&new_client->dev, |
449 | &sensor_dev_attr_fan1_input.dev_attr); | |
450 | device_create_file(&new_client->dev, | |
451 | &sensor_dev_attr_fan1_min.dev_attr); | |
1da177e4 LT |
452 | } |
453 | device_create_file(&new_client->dev, &dev_attr_pwm1); | |
454 | device_create_file(&new_client->dev, &dev_attr_pwm1_enable); | |
bc51ae11 JD |
455 | device_create_file(&new_client->dev, |
456 | &sensor_dev_attr_temp1_input.dev_attr); | |
457 | device_create_file(&new_client->dev, | |
458 | &sensor_dev_attr_temp2_input.dev_attr); | |
459 | device_create_file(&new_client->dev, | |
460 | &sensor_dev_attr_temp2_min.dev_attr); | |
461 | device_create_file(&new_client->dev, | |
462 | &sensor_dev_attr_temp1_max.dev_attr); | |
463 | device_create_file(&new_client->dev, | |
464 | &sensor_dev_attr_temp2_max.dev_attr); | |
465 | device_create_file(&new_client->dev, | |
466 | &sensor_dev_attr_temp2_crit.dev_attr); | |
1da177e4 LT |
467 | device_create_file(&new_client->dev, &dev_attr_temp2_crit_hyst); |
468 | device_create_file(&new_client->dev, &dev_attr_alarms); | |
469 | ||
470 | return 0; | |
471 | ||
943b0830 MH |
472 | exit_detach: |
473 | i2c_detach_client(new_client); | |
1da177e4 LT |
474 | exit_free: |
475 | kfree(data); | |
476 | exit: | |
477 | return err; | |
478 | } | |
479 | ||
480 | /* Idealy we shouldn't have to initialize anything, since the BIOS | |
481 | should have taken care of everything */ | |
482 | static void lm63_init_client(struct i2c_client *client) | |
483 | { | |
484 | struct lm63_data *data = i2c_get_clientdata(client); | |
485 | ||
486 | data->config = i2c_smbus_read_byte_data(client, LM63_REG_CONFIG1); | |
487 | data->config_fan = i2c_smbus_read_byte_data(client, | |
488 | LM63_REG_CONFIG_FAN); | |
489 | ||
490 | /* Start converting if needed */ | |
491 | if (data->config & 0x40) { /* standby */ | |
492 | dev_dbg(&client->dev, "Switching to operational mode"); | |
493 | data->config &= 0xA7; | |
494 | i2c_smbus_write_byte_data(client, LM63_REG_CONFIG1, | |
495 | data->config); | |
496 | } | |
497 | ||
498 | /* We may need pwm1_freq before ever updating the client data */ | |
499 | data->pwm1_freq = i2c_smbus_read_byte_data(client, LM63_REG_PWM_FREQ); | |
500 | if (data->pwm1_freq == 0) | |
501 | data->pwm1_freq = 1; | |
502 | ||
503 | /* Show some debug info about the LM63 configuration */ | |
504 | dev_dbg(&client->dev, "Alert/tach pin configured for %s\n", | |
505 | (data->config & 0x04) ? "tachometer input" : | |
506 | "alert output"); | |
507 | dev_dbg(&client->dev, "PWM clock %s kHz, output frequency %u Hz\n", | |
508 | (data->config_fan & 0x08) ? "1.4" : "360", | |
509 | ((data->config_fan & 0x08) ? 700 : 180000) / data->pwm1_freq); | |
510 | dev_dbg(&client->dev, "PWM output active %s, %s mode\n", | |
511 | (data->config_fan & 0x10) ? "low" : "high", | |
512 | (data->config_fan & 0x20) ? "manual" : "auto"); | |
513 | } | |
514 | ||
515 | static int lm63_detach_client(struct i2c_client *client) | |
516 | { | |
943b0830 | 517 | struct lm63_data *data = i2c_get_clientdata(client); |
1da177e4 LT |
518 | int err; |
519 | ||
943b0830 MH |
520 | hwmon_device_unregister(data->class_dev); |
521 | ||
7bef5594 | 522 | if ((err = i2c_detach_client(client))) |
1da177e4 | 523 | return err; |
1da177e4 | 524 | |
943b0830 | 525 | kfree(data); |
1da177e4 LT |
526 | return 0; |
527 | } | |
528 | ||
529 | static struct lm63_data *lm63_update_device(struct device *dev) | |
530 | { | |
531 | struct i2c_client *client = to_i2c_client(dev); | |
532 | struct lm63_data *data = i2c_get_clientdata(client); | |
533 | ||
534 | down(&data->update_lock); | |
535 | ||
536 | if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { | |
537 | if (data->config & 0x04) { /* tachometer enabled */ | |
538 | /* order matters for fan1_input */ | |
bc51ae11 JD |
539 | data->fan[0] = i2c_smbus_read_byte_data(client, |
540 | LM63_REG_TACH_COUNT_LSB) & 0xFC; | |
541 | data->fan[0] |= i2c_smbus_read_byte_data(client, | |
542 | LM63_REG_TACH_COUNT_MSB) << 8; | |
543 | data->fan[1] = (i2c_smbus_read_byte_data(client, | |
544 | LM63_REG_TACH_LIMIT_LSB) & 0xFC) | |
545 | | (i2c_smbus_read_byte_data(client, | |
546 | LM63_REG_TACH_LIMIT_MSB) << 8); | |
1da177e4 LT |
547 | } |
548 | ||
549 | data->pwm1_freq = i2c_smbus_read_byte_data(client, | |
550 | LM63_REG_PWM_FREQ); | |
551 | if (data->pwm1_freq == 0) | |
552 | data->pwm1_freq = 1; | |
553 | data->pwm1_value = i2c_smbus_read_byte_data(client, | |
554 | LM63_REG_PWM_VALUE); | |
555 | ||
bc51ae11 JD |
556 | data->temp8[0] = i2c_smbus_read_byte_data(client, |
557 | LM63_REG_LOCAL_TEMP); | |
558 | data->temp8[1] = i2c_smbus_read_byte_data(client, | |
559 | LM63_REG_LOCAL_HIGH); | |
1da177e4 LT |
560 | |
561 | /* order matters for temp2_input */ | |
bc51ae11 JD |
562 | data->temp11[0] = i2c_smbus_read_byte_data(client, |
563 | LM63_REG_REMOTE_TEMP_MSB) << 8; | |
564 | data->temp11[0] |= i2c_smbus_read_byte_data(client, | |
565 | LM63_REG_REMOTE_TEMP_LSB); | |
566 | data->temp11[1] = (i2c_smbus_read_byte_data(client, | |
1da177e4 LT |
567 | LM63_REG_REMOTE_LOW_MSB) << 8) |
568 | | i2c_smbus_read_byte_data(client, | |
569 | LM63_REG_REMOTE_LOW_LSB); | |
bc51ae11 JD |
570 | data->temp11[2] = (i2c_smbus_read_byte_data(client, |
571 | LM63_REG_REMOTE_HIGH_MSB) << 8) | |
572 | | i2c_smbus_read_byte_data(client, | |
573 | LM63_REG_REMOTE_HIGH_LSB); | |
574 | data->temp8[2] = i2c_smbus_read_byte_data(client, | |
575 | LM63_REG_REMOTE_TCRIT); | |
1da177e4 LT |
576 | data->temp2_crit_hyst = i2c_smbus_read_byte_data(client, |
577 | LM63_REG_REMOTE_TCRIT_HYST); | |
578 | ||
579 | data->alarms = i2c_smbus_read_byte_data(client, | |
580 | LM63_REG_ALERT_STATUS) & 0x7F; | |
581 | ||
582 | data->last_updated = jiffies; | |
583 | data->valid = 1; | |
584 | } | |
585 | ||
586 | up(&data->update_lock); | |
587 | ||
588 | return data; | |
589 | } | |
590 | ||
591 | static int __init sensors_lm63_init(void) | |
592 | { | |
593 | return i2c_add_driver(&lm63_driver); | |
594 | } | |
595 | ||
596 | static void __exit sensors_lm63_exit(void) | |
597 | { | |
598 | i2c_del_driver(&lm63_driver); | |
599 | } | |
600 | ||
601 | MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>"); | |
602 | MODULE_DESCRIPTION("LM63 driver"); | |
603 | MODULE_LICENSE("GPL"); | |
604 | ||
605 | module_init(sensors_lm63_init); | |
606 | module_exit(sensors_lm63_exit); |