Commit | Line | Data |
---|---|---|
9873964d CS |
1 | /* |
2 | w83791d.c - Part of lm_sensors, Linux kernel modules for hardware | |
3 | monitoring | |
4 | ||
64383123 | 5 | Copyright (C) 2006-2007 Charles Spirakis <bezaur@gmail.com> |
9873964d CS |
6 | |
7 | This program is free software; you can redistribute it and/or modify | |
8 | it under the terms of the GNU General Public License as published by | |
9 | the Free Software Foundation; either version 2 of the License, or | |
10 | (at your option) any later version. | |
11 | ||
12 | This program is distributed in the hope that it will be useful, | |
13 | but WITHOUT ANY WARRANTY; without even the implied warranty of | |
14 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
15 | GNU General Public License for more details. | |
16 | ||
17 | You should have received a copy of the GNU General Public License | |
18 | along with this program; if not, write to the Free Software | |
19 | Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
20 | */ | |
21 | ||
22 | /* | |
23 | Supports following chips: | |
24 | ||
25 | Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA | |
26 | w83791d 10 5 3 3 0x71 0x5ca3 yes no | |
27 | ||
28 | The w83791d chip appears to be part way between the 83781d and the | |
29 | 83792d. Thus, this file is derived from both the w83792d.c and | |
125751cb CS |
30 | w83781d.c files. |
31 | ||
32 | The w83791g chip is the same as the w83791d but lead-free. | |
9873964d CS |
33 | */ |
34 | ||
9873964d CS |
35 | #include <linux/module.h> |
36 | #include <linux/init.h> | |
37 | #include <linux/slab.h> | |
38 | #include <linux/i2c.h> | |
39 | #include <linux/hwmon.h> | |
40 | #include <linux/hwmon-vid.h> | |
41 | #include <linux/hwmon-sysfs.h> | |
42 | #include <linux/err.h> | |
43 | #include <linux/mutex.h> | |
44 | ||
45 | #define NUMBER_OF_VIN 10 | |
46 | #define NUMBER_OF_FANIN 5 | |
47 | #define NUMBER_OF_TEMPIN 3 | |
48 | ||
49 | /* Addresses to scan */ | |
25e9c86d MH |
50 | static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f, |
51 | I2C_CLIENT_END }; | |
9873964d CS |
52 | |
53 | /* Insmod parameters */ | |
54 | I2C_CLIENT_INSMOD_1(w83791d); | |
55 | I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: " | |
56 | "{bus, clientaddr, subclientaddr1, subclientaddr2}"); | |
57 | ||
58 | static int reset; | |
59 | module_param(reset, bool, 0); | |
60 | MODULE_PARM_DESC(reset, "Set to one to force a hardware chip reset"); | |
61 | ||
62 | static int init; | |
63 | module_param(init, bool, 0); | |
64 | MODULE_PARM_DESC(init, "Set to one to force extra software initialization"); | |
65 | ||
66 | /* The W83791D registers */ | |
67 | static const u8 W83791D_REG_IN[NUMBER_OF_VIN] = { | |
68 | 0x20, /* VCOREA in DataSheet */ | |
69 | 0x21, /* VINR0 in DataSheet */ | |
70 | 0x22, /* +3.3VIN in DataSheet */ | |
71 | 0x23, /* VDD5V in DataSheet */ | |
72 | 0x24, /* +12VIN in DataSheet */ | |
73 | 0x25, /* -12VIN in DataSheet */ | |
74 | 0x26, /* -5VIN in DataSheet */ | |
75 | 0xB0, /* 5VSB in DataSheet */ | |
76 | 0xB1, /* VBAT in DataSheet */ | |
77 | 0xB2 /* VINR1 in DataSheet */ | |
78 | }; | |
79 | ||
80 | static const u8 W83791D_REG_IN_MAX[NUMBER_OF_VIN] = { | |
81 | 0x2B, /* VCOREA High Limit in DataSheet */ | |
82 | 0x2D, /* VINR0 High Limit in DataSheet */ | |
83 | 0x2F, /* +3.3VIN High Limit in DataSheet */ | |
84 | 0x31, /* VDD5V High Limit in DataSheet */ | |
85 | 0x33, /* +12VIN High Limit in DataSheet */ | |
86 | 0x35, /* -12VIN High Limit in DataSheet */ | |
87 | 0x37, /* -5VIN High Limit in DataSheet */ | |
88 | 0xB4, /* 5VSB High Limit in DataSheet */ | |
89 | 0xB6, /* VBAT High Limit in DataSheet */ | |
90 | 0xB8 /* VINR1 High Limit in DataSheet */ | |
91 | }; | |
92 | static const u8 W83791D_REG_IN_MIN[NUMBER_OF_VIN] = { | |
93 | 0x2C, /* VCOREA Low Limit in DataSheet */ | |
94 | 0x2E, /* VINR0 Low Limit in DataSheet */ | |
95 | 0x30, /* +3.3VIN Low Limit in DataSheet */ | |
96 | 0x32, /* VDD5V Low Limit in DataSheet */ | |
97 | 0x34, /* +12VIN Low Limit in DataSheet */ | |
98 | 0x36, /* -12VIN Low Limit in DataSheet */ | |
99 | 0x38, /* -5VIN Low Limit in DataSheet */ | |
100 | 0xB5, /* 5VSB Low Limit in DataSheet */ | |
101 | 0xB7, /* VBAT Low Limit in DataSheet */ | |
102 | 0xB9 /* VINR1 Low Limit in DataSheet */ | |
103 | }; | |
104 | static const u8 W83791D_REG_FAN[NUMBER_OF_FANIN] = { | |
105 | 0x28, /* FAN 1 Count in DataSheet */ | |
106 | 0x29, /* FAN 2 Count in DataSheet */ | |
107 | 0x2A, /* FAN 3 Count in DataSheet */ | |
108 | 0xBA, /* FAN 4 Count in DataSheet */ | |
109 | 0xBB, /* FAN 5 Count in DataSheet */ | |
110 | }; | |
111 | static const u8 W83791D_REG_FAN_MIN[NUMBER_OF_FANIN] = { | |
112 | 0x3B, /* FAN 1 Count Low Limit in DataSheet */ | |
113 | 0x3C, /* FAN 2 Count Low Limit in DataSheet */ | |
114 | 0x3D, /* FAN 3 Count Low Limit in DataSheet */ | |
115 | 0xBC, /* FAN 4 Count Low Limit in DataSheet */ | |
116 | 0xBD, /* FAN 5 Count Low Limit in DataSheet */ | |
117 | }; | |
118 | ||
119 | static const u8 W83791D_REG_FAN_CFG[2] = { | |
120 | 0x84, /* FAN 1/2 configuration */ | |
121 | 0x95, /* FAN 3 configuration */ | |
122 | }; | |
123 | ||
124 | static const u8 W83791D_REG_FAN_DIV[3] = { | |
125 | 0x47, /* contains FAN1 and FAN2 Divisor */ | |
126 | 0x4b, /* contains FAN3 Divisor */ | |
127 | 0x5C, /* contains FAN4 and FAN5 Divisor */ | |
128 | }; | |
129 | ||
130 | #define W83791D_REG_BANK 0x4E | |
131 | #define W83791D_REG_TEMP2_CONFIG 0xC2 | |
132 | #define W83791D_REG_TEMP3_CONFIG 0xCA | |
133 | ||
134 | static const u8 W83791D_REG_TEMP1[3] = { | |
135 | 0x27, /* TEMP 1 in DataSheet */ | |
136 | 0x39, /* TEMP 1 Over in DataSheet */ | |
137 | 0x3A, /* TEMP 1 Hyst in DataSheet */ | |
138 | }; | |
139 | ||
140 | static const u8 W83791D_REG_TEMP_ADD[2][6] = { | |
141 | {0xC0, /* TEMP 2 in DataSheet */ | |
142 | 0xC1, /* TEMP 2(0.5 deg) in DataSheet */ | |
143 | 0xC5, /* TEMP 2 Over High part in DataSheet */ | |
144 | 0xC6, /* TEMP 2 Over Low part in DataSheet */ | |
145 | 0xC3, /* TEMP 2 Thyst High part in DataSheet */ | |
146 | 0xC4}, /* TEMP 2 Thyst Low part in DataSheet */ | |
147 | {0xC8, /* TEMP 3 in DataSheet */ | |
148 | 0xC9, /* TEMP 3(0.5 deg) in DataSheet */ | |
149 | 0xCD, /* TEMP 3 Over High part in DataSheet */ | |
150 | 0xCE, /* TEMP 3 Over Low part in DataSheet */ | |
151 | 0xCB, /* TEMP 3 Thyst High part in DataSheet */ | |
152 | 0xCC} /* TEMP 3 Thyst Low part in DataSheet */ | |
153 | }; | |
154 | ||
155 | #define W83791D_REG_BEEP_CONFIG 0x4D | |
156 | ||
157 | static const u8 W83791D_REG_BEEP_CTRL[3] = { | |
158 | 0x56, /* BEEP Control Register 1 */ | |
159 | 0x57, /* BEEP Control Register 2 */ | |
160 | 0xA3, /* BEEP Control Register 3 */ | |
161 | }; | |
162 | ||
163 | #define W83791D_REG_CONFIG 0x40 | |
164 | #define W83791D_REG_VID_FANDIV 0x47 | |
165 | #define W83791D_REG_DID_VID4 0x49 | |
166 | #define W83791D_REG_WCHIPID 0x58 | |
167 | #define W83791D_REG_CHIPMAN 0x4F | |
168 | #define W83791D_REG_PIN 0x4B | |
169 | #define W83791D_REG_I2C_SUBADDR 0x4A | |
170 | ||
171 | #define W83791D_REG_ALARM1 0xA9 /* realtime status register1 */ | |
172 | #define W83791D_REG_ALARM2 0xAA /* realtime status register2 */ | |
173 | #define W83791D_REG_ALARM3 0xAB /* realtime status register3 */ | |
174 | ||
175 | #define W83791D_REG_VBAT 0x5D | |
176 | #define W83791D_REG_I2C_ADDR 0x48 | |
177 | ||
178 | /* The SMBus locks itself. The Winbond W83791D has a bank select register | |
179 | (index 0x4e), but the driver only accesses registers in bank 0. Since | |
180 | we don't switch banks, we don't need any special code to handle | |
181 | locking access between bank switches */ | |
182 | static inline int w83791d_read(struct i2c_client *client, u8 reg) | |
183 | { | |
184 | return i2c_smbus_read_byte_data(client, reg); | |
185 | } | |
186 | ||
187 | static inline int w83791d_write(struct i2c_client *client, u8 reg, u8 value) | |
188 | { | |
189 | return i2c_smbus_write_byte_data(client, reg, value); | |
190 | } | |
191 | ||
192 | /* The analog voltage inputs have 16mV LSB. Since the sysfs output is | |
193 | in mV as would be measured on the chip input pin, need to just | |
194 | multiply/divide by 16 to translate from/to register values. */ | |
195 | #define IN_TO_REG(val) (SENSORS_LIMIT((((val) + 8) / 16), 0, 255)) | |
196 | #define IN_FROM_REG(val) ((val) * 16) | |
197 | ||
198 | static u8 fan_to_reg(long rpm, int div) | |
199 | { | |
200 | if (rpm == 0) | |
201 | return 255; | |
202 | rpm = SENSORS_LIMIT(rpm, 1, 1000000); | |
203 | return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254); | |
204 | } | |
205 | ||
206 | #define FAN_FROM_REG(val,div) ((val) == 0 ? -1 : \ | |
207 | ((val) == 255 ? 0 : \ | |
208 | 1350000 / ((val) * (div)))) | |
209 | ||
210 | /* for temp1 which is 8-bit resolution, LSB = 1 degree Celsius */ | |
211 | #define TEMP1_FROM_REG(val) ((val) * 1000) | |
212 | #define TEMP1_TO_REG(val) ((val) <= -128000 ? -128 : \ | |
213 | (val) >= 127000 ? 127 : \ | |
214 | (val) < 0 ? ((val) - 500) / 1000 : \ | |
215 | ((val) + 500) / 1000) | |
216 | ||
217 | /* for temp2 and temp3 which are 9-bit resolution, LSB = 0.5 degree Celsius | |
218 | Assumes the top 8 bits are the integral amount and the bottom 8 bits | |
219 | are the fractional amount. Since we only have 0.5 degree resolution, | |
220 | the bottom 7 bits will always be zero */ | |
221 | #define TEMP23_FROM_REG(val) ((val) / 128 * 500) | |
222 | #define TEMP23_TO_REG(val) ((val) <= -128000 ? 0x8000 : \ | |
223 | (val) >= 127500 ? 0x7F80 : \ | |
224 | (val) < 0 ? ((val) - 250) / 500 * 128 : \ | |
225 | ((val) + 250) / 500 * 128) | |
226 | ||
227 | ||
228 | #define BEEP_MASK_TO_REG(val) ((val) & 0xffffff) | |
229 | #define BEEP_MASK_FROM_REG(val) ((val) & 0xffffff) | |
230 | ||
231 | #define DIV_FROM_REG(val) (1 << (val)) | |
232 | ||
233 | static u8 div_to_reg(int nr, long val) | |
234 | { | |
235 | int i; | |
9873964d | 236 | |
ad02ad85 MH |
237 | /* fan divisors max out at 128 */ |
238 | val = SENSORS_LIMIT(val, 1, 128) >> 1; | |
9873964d CS |
239 | for (i = 0; i < 7; i++) { |
240 | if (val == 0) | |
241 | break; | |
242 | val >>= 1; | |
243 | } | |
244 | return (u8) i; | |
245 | } | |
246 | ||
247 | struct w83791d_data { | |
1beeffe4 | 248 | struct device *hwmon_dev; |
9873964d CS |
249 | struct mutex update_lock; |
250 | ||
251 | char valid; /* !=0 if following fields are valid */ | |
252 | unsigned long last_updated; /* In jiffies */ | |
253 | ||
254 | /* array of 2 pointers to subclients */ | |
255 | struct i2c_client *lm75[2]; | |
256 | ||
257 | /* volts */ | |
258 | u8 in[NUMBER_OF_VIN]; /* Register value */ | |
259 | u8 in_max[NUMBER_OF_VIN]; /* Register value */ | |
260 | u8 in_min[NUMBER_OF_VIN]; /* Register value */ | |
261 | ||
262 | /* fans */ | |
263 | u8 fan[NUMBER_OF_FANIN]; /* Register value */ | |
264 | u8 fan_min[NUMBER_OF_FANIN]; /* Register value */ | |
265 | u8 fan_div[NUMBER_OF_FANIN]; /* Register encoding, shifted right */ | |
266 | ||
267 | /* Temperature sensors */ | |
268 | ||
269 | s8 temp1[3]; /* current, over, thyst */ | |
270 | s16 temp_add[2][3]; /* fixed point value. Top 8 bits are the | |
271 | integral part, bottom 8 bits are the | |
272 | fractional part. We only use the top | |
273 | 9 bits as the resolution is only | |
274 | to the 0.5 degree C... | |
275 | two sensors with three values | |
276 | (cur, over, hyst) */ | |
277 | ||
278 | /* Misc */ | |
279 | u32 alarms; /* realtime status register encoding,combined */ | |
280 | u8 beep_enable; /* Global beep enable */ | |
281 | u32 beep_mask; /* Mask off specific beeps */ | |
282 | u8 vid; /* Register encoding, combined */ | |
283 | u8 vrm; /* hwmon-vid */ | |
284 | }; | |
285 | ||
cb0c1af3 JD |
286 | static int w83791d_probe(struct i2c_client *client, |
287 | const struct i2c_device_id *id); | |
288 | static int w83791d_detect(struct i2c_client *client, int kind, | |
289 | struct i2c_board_info *info); | |
290 | static int w83791d_remove(struct i2c_client *client); | |
9873964d CS |
291 | |
292 | static int w83791d_read(struct i2c_client *client, u8 register); | |
293 | static int w83791d_write(struct i2c_client *client, u8 register, u8 value); | |
294 | static struct w83791d_data *w83791d_update_device(struct device *dev); | |
295 | ||
296 | #ifdef DEBUG | |
297 | static void w83791d_print_debug(struct w83791d_data *data, struct device *dev); | |
298 | #endif | |
299 | ||
300 | static void w83791d_init_client(struct i2c_client *client); | |
301 | ||
cb0c1af3 JD |
302 | static const struct i2c_device_id w83791d_id[] = { |
303 | { "w83791d", w83791d }, | |
304 | { } | |
305 | }; | |
306 | MODULE_DEVICE_TABLE(i2c, w83791d_id); | |
307 | ||
9873964d | 308 | static struct i2c_driver w83791d_driver = { |
cb0c1af3 | 309 | .class = I2C_CLASS_HWMON, |
9873964d CS |
310 | .driver = { |
311 | .name = "w83791d", | |
312 | }, | |
cb0c1af3 JD |
313 | .probe = w83791d_probe, |
314 | .remove = w83791d_remove, | |
315 | .id_table = w83791d_id, | |
316 | .detect = w83791d_detect, | |
317 | .address_data = &addr_data, | |
9873964d CS |
318 | }; |
319 | ||
320 | /* following are the sysfs callback functions */ | |
321 | #define show_in_reg(reg) \ | |
322 | static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \ | |
323 | char *buf) \ | |
324 | { \ | |
325 | struct sensor_device_attribute *sensor_attr = \ | |
326 | to_sensor_dev_attr(attr); \ | |
327 | struct w83791d_data *data = w83791d_update_device(dev); \ | |
328 | int nr = sensor_attr->index; \ | |
329 | return sprintf(buf,"%d\n", IN_FROM_REG(data->reg[nr])); \ | |
330 | } | |
331 | ||
332 | show_in_reg(in); | |
333 | show_in_reg(in_min); | |
334 | show_in_reg(in_max); | |
335 | ||
336 | #define store_in_reg(REG, reg) \ | |
337 | static ssize_t store_in_##reg(struct device *dev, \ | |
338 | struct device_attribute *attr, \ | |
339 | const char *buf, size_t count) \ | |
340 | { \ | |
341 | struct sensor_device_attribute *sensor_attr = \ | |
342 | to_sensor_dev_attr(attr); \ | |
343 | struct i2c_client *client = to_i2c_client(dev); \ | |
344 | struct w83791d_data *data = i2c_get_clientdata(client); \ | |
345 | unsigned long val = simple_strtoul(buf, NULL, 10); \ | |
346 | int nr = sensor_attr->index; \ | |
347 | \ | |
348 | mutex_lock(&data->update_lock); \ | |
349 | data->in_##reg[nr] = IN_TO_REG(val); \ | |
350 | w83791d_write(client, W83791D_REG_IN_##REG[nr], data->in_##reg[nr]); \ | |
351 | mutex_unlock(&data->update_lock); \ | |
352 | \ | |
353 | return count; \ | |
354 | } | |
355 | store_in_reg(MIN, min); | |
356 | store_in_reg(MAX, max); | |
357 | ||
358 | static struct sensor_device_attribute sda_in_input[] = { | |
359 | SENSOR_ATTR(in0_input, S_IRUGO, show_in, NULL, 0), | |
360 | SENSOR_ATTR(in1_input, S_IRUGO, show_in, NULL, 1), | |
361 | SENSOR_ATTR(in2_input, S_IRUGO, show_in, NULL, 2), | |
362 | SENSOR_ATTR(in3_input, S_IRUGO, show_in, NULL, 3), | |
363 | SENSOR_ATTR(in4_input, S_IRUGO, show_in, NULL, 4), | |
364 | SENSOR_ATTR(in5_input, S_IRUGO, show_in, NULL, 5), | |
365 | SENSOR_ATTR(in6_input, S_IRUGO, show_in, NULL, 6), | |
366 | SENSOR_ATTR(in7_input, S_IRUGO, show_in, NULL, 7), | |
367 | SENSOR_ATTR(in8_input, S_IRUGO, show_in, NULL, 8), | |
368 | SENSOR_ATTR(in9_input, S_IRUGO, show_in, NULL, 9), | |
369 | }; | |
370 | ||
371 | static struct sensor_device_attribute sda_in_min[] = { | |
372 | SENSOR_ATTR(in0_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 0), | |
373 | SENSOR_ATTR(in1_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 1), | |
374 | SENSOR_ATTR(in2_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 2), | |
375 | SENSOR_ATTR(in3_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 3), | |
376 | SENSOR_ATTR(in4_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 4), | |
377 | SENSOR_ATTR(in5_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 5), | |
378 | SENSOR_ATTR(in6_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 6), | |
379 | SENSOR_ATTR(in7_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 7), | |
380 | SENSOR_ATTR(in8_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 8), | |
381 | SENSOR_ATTR(in9_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 9), | |
382 | }; | |
383 | ||
384 | static struct sensor_device_attribute sda_in_max[] = { | |
385 | SENSOR_ATTR(in0_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 0), | |
386 | SENSOR_ATTR(in1_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 1), | |
387 | SENSOR_ATTR(in2_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 2), | |
388 | SENSOR_ATTR(in3_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 3), | |
389 | SENSOR_ATTR(in4_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 4), | |
390 | SENSOR_ATTR(in5_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 5), | |
391 | SENSOR_ATTR(in6_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 6), | |
392 | SENSOR_ATTR(in7_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 7), | |
393 | SENSOR_ATTR(in8_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 8), | |
394 | SENSOR_ATTR(in9_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 9), | |
395 | }; | |
396 | ||
64383123 CS |
397 | |
398 | static ssize_t show_beep(struct device *dev, struct device_attribute *attr, | |
399 | char *buf) | |
400 | { | |
401 | struct sensor_device_attribute *sensor_attr = | |
402 | to_sensor_dev_attr(attr); | |
403 | struct w83791d_data *data = w83791d_update_device(dev); | |
404 | int bitnr = sensor_attr->index; | |
405 | ||
406 | return sprintf(buf, "%d\n", (data->beep_mask >> bitnr) & 1); | |
407 | } | |
408 | ||
409 | static ssize_t store_beep(struct device *dev, struct device_attribute *attr, | |
410 | const char *buf, size_t count) | |
411 | { | |
412 | struct sensor_device_attribute *sensor_attr = | |
413 | to_sensor_dev_attr(attr); | |
414 | struct i2c_client *client = to_i2c_client(dev); | |
415 | struct w83791d_data *data = i2c_get_clientdata(client); | |
416 | int bitnr = sensor_attr->index; | |
417 | int bytenr = bitnr / 8; | |
418 | long val = simple_strtol(buf, NULL, 10) ? 1 : 0; | |
419 | ||
420 | mutex_lock(&data->update_lock); | |
421 | ||
422 | data->beep_mask &= ~(0xff << (bytenr * 8)); | |
423 | data->beep_mask |= w83791d_read(client, W83791D_REG_BEEP_CTRL[bytenr]) | |
424 | << (bytenr * 8); | |
425 | ||
426 | data->beep_mask &= ~(1 << bitnr); | |
427 | data->beep_mask |= val << bitnr; | |
428 | ||
429 | w83791d_write(client, W83791D_REG_BEEP_CTRL[bytenr], | |
430 | (data->beep_mask >> (bytenr * 8)) & 0xff); | |
431 | ||
432 | mutex_unlock(&data->update_lock); | |
433 | ||
434 | return count; | |
435 | } | |
436 | ||
437 | static ssize_t show_alarm(struct device *dev, struct device_attribute *attr, | |
438 | char *buf) | |
439 | { | |
440 | struct sensor_device_attribute *sensor_attr = | |
441 | to_sensor_dev_attr(attr); | |
442 | struct w83791d_data *data = w83791d_update_device(dev); | |
443 | int bitnr = sensor_attr->index; | |
444 | ||
445 | return sprintf(buf, "%d\n", (data->alarms >> bitnr) & 1); | |
446 | } | |
447 | ||
448 | /* Note: The bitmask for the beep enable/disable is different than | |
449 | the bitmask for the alarm. */ | |
450 | static struct sensor_device_attribute sda_in_beep[] = { | |
451 | SENSOR_ATTR(in0_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 0), | |
452 | SENSOR_ATTR(in1_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 13), | |
453 | SENSOR_ATTR(in2_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 2), | |
454 | SENSOR_ATTR(in3_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 3), | |
455 | SENSOR_ATTR(in4_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 8), | |
456 | SENSOR_ATTR(in5_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 9), | |
457 | SENSOR_ATTR(in6_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 10), | |
458 | SENSOR_ATTR(in7_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 16), | |
459 | SENSOR_ATTR(in8_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 17), | |
460 | SENSOR_ATTR(in9_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 14), | |
461 | }; | |
462 | ||
463 | static struct sensor_device_attribute sda_in_alarm[] = { | |
464 | SENSOR_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0), | |
465 | SENSOR_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1), | |
466 | SENSOR_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2), | |
467 | SENSOR_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3), | |
468 | SENSOR_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8), | |
469 | SENSOR_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 9), | |
470 | SENSOR_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 10), | |
471 | SENSOR_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 19), | |
472 | SENSOR_ATTR(in8_alarm, S_IRUGO, show_alarm, NULL, 20), | |
473 | SENSOR_ATTR(in9_alarm, S_IRUGO, show_alarm, NULL, 14), | |
474 | }; | |
475 | ||
9873964d CS |
476 | #define show_fan_reg(reg) \ |
477 | static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \ | |
478 | char *buf) \ | |
479 | { \ | |
480 | struct sensor_device_attribute *sensor_attr = \ | |
481 | to_sensor_dev_attr(attr); \ | |
482 | struct w83791d_data *data = w83791d_update_device(dev); \ | |
483 | int nr = sensor_attr->index; \ | |
484 | return sprintf(buf,"%d\n", \ | |
485 | FAN_FROM_REG(data->reg[nr], DIV_FROM_REG(data->fan_div[nr]))); \ | |
486 | } | |
487 | ||
488 | show_fan_reg(fan); | |
489 | show_fan_reg(fan_min); | |
490 | ||
491 | static ssize_t store_fan_min(struct device *dev, struct device_attribute *attr, | |
492 | const char *buf, size_t count) | |
493 | { | |
494 | struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); | |
495 | struct i2c_client *client = to_i2c_client(dev); | |
496 | struct w83791d_data *data = i2c_get_clientdata(client); | |
497 | unsigned long val = simple_strtoul(buf, NULL, 10); | |
498 | int nr = sensor_attr->index; | |
499 | ||
500 | mutex_lock(&data->update_lock); | |
501 | data->fan_min[nr] = fan_to_reg(val, DIV_FROM_REG(data->fan_div[nr])); | |
502 | w83791d_write(client, W83791D_REG_FAN_MIN[nr], data->fan_min[nr]); | |
503 | mutex_unlock(&data->update_lock); | |
504 | ||
505 | return count; | |
506 | } | |
507 | ||
508 | static ssize_t show_fan_div(struct device *dev, struct device_attribute *attr, | |
509 | char *buf) | |
510 | { | |
511 | struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); | |
512 | int nr = sensor_attr->index; | |
513 | struct w83791d_data *data = w83791d_update_device(dev); | |
514 | return sprintf(buf, "%u\n", DIV_FROM_REG(data->fan_div[nr])); | |
515 | } | |
516 | ||
517 | /* Note: we save and restore the fan minimum here, because its value is | |
518 | determined in part by the fan divisor. This follows the principle of | |
519 | least suprise; the user doesn't expect the fan minimum to change just | |
520 | because the divisor changed. */ | |
521 | static ssize_t store_fan_div(struct device *dev, struct device_attribute *attr, | |
522 | const char *buf, size_t count) | |
523 | { | |
524 | struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); | |
525 | struct i2c_client *client = to_i2c_client(dev); | |
526 | struct w83791d_data *data = i2c_get_clientdata(client); | |
527 | int nr = sensor_attr->index; | |
528 | unsigned long min; | |
529 | u8 tmp_fan_div; | |
530 | u8 fan_div_reg; | |
ad02ad85 | 531 | u8 vbat_reg; |
9873964d CS |
532 | int indx = 0; |
533 | u8 keep_mask = 0; | |
534 | u8 new_shift = 0; | |
535 | ||
536 | /* Save fan_min */ | |
537 | min = FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr])); | |
538 | ||
539 | mutex_lock(&data->update_lock); | |
540 | data->fan_div[nr] = div_to_reg(nr, simple_strtoul(buf, NULL, 10)); | |
541 | ||
542 | switch (nr) { | |
543 | case 0: | |
544 | indx = 0; | |
545 | keep_mask = 0xcf; | |
546 | new_shift = 4; | |
547 | break; | |
548 | case 1: | |
549 | indx = 0; | |
550 | keep_mask = 0x3f; | |
551 | new_shift = 6; | |
552 | break; | |
553 | case 2: | |
554 | indx = 1; | |
555 | keep_mask = 0x3f; | |
556 | new_shift = 6; | |
557 | break; | |
558 | case 3: | |
559 | indx = 2; | |
560 | keep_mask = 0xf8; | |
561 | new_shift = 0; | |
562 | break; | |
563 | case 4: | |
564 | indx = 2; | |
565 | keep_mask = 0x8f; | |
566 | new_shift = 4; | |
567 | break; | |
568 | #ifdef DEBUG | |
569 | default: | |
570 | dev_warn(dev, "store_fan_div: Unexpected nr seen: %d\n", nr); | |
571 | count = -EINVAL; | |
572 | goto err_exit; | |
573 | #endif | |
574 | } | |
575 | ||
576 | fan_div_reg = w83791d_read(client, W83791D_REG_FAN_DIV[indx]) | |
577 | & keep_mask; | |
578 | tmp_fan_div = (data->fan_div[nr] << new_shift) & ~keep_mask; | |
579 | ||
580 | w83791d_write(client, W83791D_REG_FAN_DIV[indx], | |
581 | fan_div_reg | tmp_fan_div); | |
582 | ||
ad02ad85 MH |
583 | /* Bit 2 of fans 0-2 is stored in the vbat register (bits 5-7) */ |
584 | if (nr < 3) { | |
585 | keep_mask = ~(1 << (nr + 5)); | |
586 | vbat_reg = w83791d_read(client, W83791D_REG_VBAT) | |
587 | & keep_mask; | |
588 | tmp_fan_div = (data->fan_div[nr] << (3 + nr)) & ~keep_mask; | |
589 | w83791d_write(client, W83791D_REG_VBAT, | |
590 | vbat_reg | tmp_fan_div); | |
591 | } | |
592 | ||
9873964d CS |
593 | /* Restore fan_min */ |
594 | data->fan_min[nr] = fan_to_reg(min, DIV_FROM_REG(data->fan_div[nr])); | |
595 | w83791d_write(client, W83791D_REG_FAN_MIN[nr], data->fan_min[nr]); | |
596 | ||
597 | #ifdef DEBUG | |
598 | err_exit: | |
599 | #endif | |
600 | mutex_unlock(&data->update_lock); | |
601 | ||
602 | return count; | |
603 | } | |
604 | ||
605 | static struct sensor_device_attribute sda_fan_input[] = { | |
606 | SENSOR_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0), | |
607 | SENSOR_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1), | |
608 | SENSOR_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2), | |
609 | SENSOR_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 3), | |
610 | SENSOR_ATTR(fan5_input, S_IRUGO, show_fan, NULL, 4), | |
611 | }; | |
612 | ||
613 | static struct sensor_device_attribute sda_fan_min[] = { | |
614 | SENSOR_ATTR(fan1_min, S_IWUSR | S_IRUGO, | |
615 | show_fan_min, store_fan_min, 0), | |
616 | SENSOR_ATTR(fan2_min, S_IWUSR | S_IRUGO, | |
617 | show_fan_min, store_fan_min, 1), | |
618 | SENSOR_ATTR(fan3_min, S_IWUSR | S_IRUGO, | |
619 | show_fan_min, store_fan_min, 2), | |
620 | SENSOR_ATTR(fan4_min, S_IWUSR | S_IRUGO, | |
621 | show_fan_min, store_fan_min, 3), | |
622 | SENSOR_ATTR(fan5_min, S_IWUSR | S_IRUGO, | |
623 | show_fan_min, store_fan_min, 4), | |
624 | }; | |
625 | ||
626 | static struct sensor_device_attribute sda_fan_div[] = { | |
627 | SENSOR_ATTR(fan1_div, S_IWUSR | S_IRUGO, | |
628 | show_fan_div, store_fan_div, 0), | |
629 | SENSOR_ATTR(fan2_div, S_IWUSR | S_IRUGO, | |
630 | show_fan_div, store_fan_div, 1), | |
631 | SENSOR_ATTR(fan3_div, S_IWUSR | S_IRUGO, | |
632 | show_fan_div, store_fan_div, 2), | |
633 | SENSOR_ATTR(fan4_div, S_IWUSR | S_IRUGO, | |
634 | show_fan_div, store_fan_div, 3), | |
635 | SENSOR_ATTR(fan5_div, S_IWUSR | S_IRUGO, | |
636 | show_fan_div, store_fan_div, 4), | |
637 | }; | |
638 | ||
64383123 CS |
639 | static struct sensor_device_attribute sda_fan_beep[] = { |
640 | SENSOR_ATTR(fan1_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 6), | |
641 | SENSOR_ATTR(fan2_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 7), | |
642 | SENSOR_ATTR(fan3_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 11), | |
643 | SENSOR_ATTR(fan4_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 21), | |
644 | SENSOR_ATTR(fan5_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 22), | |
645 | }; | |
646 | ||
647 | static struct sensor_device_attribute sda_fan_alarm[] = { | |
648 | SENSOR_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 6), | |
649 | SENSOR_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 7), | |
650 | SENSOR_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 11), | |
651 | SENSOR_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL, 21), | |
652 | SENSOR_ATTR(fan5_alarm, S_IRUGO, show_alarm, NULL, 22), | |
653 | }; | |
654 | ||
9873964d CS |
655 | /* read/write the temperature1, includes measured value and limits */ |
656 | static ssize_t show_temp1(struct device *dev, struct device_attribute *devattr, | |
657 | char *buf) | |
658 | { | |
659 | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | |
660 | struct w83791d_data *data = w83791d_update_device(dev); | |
661 | return sprintf(buf, "%d\n", TEMP1_FROM_REG(data->temp1[attr->index])); | |
662 | } | |
663 | ||
664 | static ssize_t store_temp1(struct device *dev, struct device_attribute *devattr, | |
665 | const char *buf, size_t count) | |
666 | { | |
667 | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | |
668 | struct i2c_client *client = to_i2c_client(dev); | |
669 | struct w83791d_data *data = i2c_get_clientdata(client); | |
670 | long val = simple_strtol(buf, NULL, 10); | |
671 | int nr = attr->index; | |
672 | ||
673 | mutex_lock(&data->update_lock); | |
674 | data->temp1[nr] = TEMP1_TO_REG(val); | |
675 | w83791d_write(client, W83791D_REG_TEMP1[nr], data->temp1[nr]); | |
676 | mutex_unlock(&data->update_lock); | |
677 | return count; | |
678 | } | |
679 | ||
680 | /* read/write temperature2-3, includes measured value and limits */ | |
681 | static ssize_t show_temp23(struct device *dev, struct device_attribute *devattr, | |
682 | char *buf) | |
683 | { | |
684 | struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); | |
685 | struct w83791d_data *data = w83791d_update_device(dev); | |
686 | int nr = attr->nr; | |
687 | int index = attr->index; | |
688 | return sprintf(buf, "%d\n", TEMP23_FROM_REG(data->temp_add[nr][index])); | |
689 | } | |
690 | ||
691 | static ssize_t store_temp23(struct device *dev, | |
692 | struct device_attribute *devattr, | |
693 | const char *buf, size_t count) | |
694 | { | |
695 | struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); | |
696 | struct i2c_client *client = to_i2c_client(dev); | |
697 | struct w83791d_data *data = i2c_get_clientdata(client); | |
698 | long val = simple_strtol(buf, NULL, 10); | |
699 | int nr = attr->nr; | |
700 | int index = attr->index; | |
701 | ||
702 | mutex_lock(&data->update_lock); | |
703 | data->temp_add[nr][index] = TEMP23_TO_REG(val); | |
704 | w83791d_write(client, W83791D_REG_TEMP_ADD[nr][index * 2], | |
705 | data->temp_add[nr][index] >> 8); | |
706 | w83791d_write(client, W83791D_REG_TEMP_ADD[nr][index * 2 + 1], | |
707 | data->temp_add[nr][index] & 0x80); | |
708 | mutex_unlock(&data->update_lock); | |
709 | ||
710 | return count; | |
711 | } | |
712 | ||
713 | static struct sensor_device_attribute_2 sda_temp_input[] = { | |
714 | SENSOR_ATTR_2(temp1_input, S_IRUGO, show_temp1, NULL, 0, 0), | |
715 | SENSOR_ATTR_2(temp2_input, S_IRUGO, show_temp23, NULL, 0, 0), | |
716 | SENSOR_ATTR_2(temp3_input, S_IRUGO, show_temp23, NULL, 1, 0), | |
717 | }; | |
718 | ||
719 | static struct sensor_device_attribute_2 sda_temp_max[] = { | |
720 | SENSOR_ATTR_2(temp1_max, S_IRUGO | S_IWUSR, | |
721 | show_temp1, store_temp1, 0, 1), | |
722 | SENSOR_ATTR_2(temp2_max, S_IRUGO | S_IWUSR, | |
723 | show_temp23, store_temp23, 0, 1), | |
724 | SENSOR_ATTR_2(temp3_max, S_IRUGO | S_IWUSR, | |
725 | show_temp23, store_temp23, 1, 1), | |
726 | }; | |
727 | ||
728 | static struct sensor_device_attribute_2 sda_temp_max_hyst[] = { | |
729 | SENSOR_ATTR_2(temp1_max_hyst, S_IRUGO | S_IWUSR, | |
730 | show_temp1, store_temp1, 0, 2), | |
731 | SENSOR_ATTR_2(temp2_max_hyst, S_IRUGO | S_IWUSR, | |
732 | show_temp23, store_temp23, 0, 2), | |
733 | SENSOR_ATTR_2(temp3_max_hyst, S_IRUGO | S_IWUSR, | |
734 | show_temp23, store_temp23, 1, 2), | |
735 | }; | |
736 | ||
64383123 CS |
737 | /* Note: The bitmask for the beep enable/disable is different than |
738 | the bitmask for the alarm. */ | |
739 | static struct sensor_device_attribute sda_temp_beep[] = { | |
740 | SENSOR_ATTR(temp1_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 4), | |
741 | SENSOR_ATTR(temp2_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 5), | |
742 | SENSOR_ATTR(temp3_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 1), | |
743 | }; | |
744 | ||
745 | static struct sensor_device_attribute sda_temp_alarm[] = { | |
746 | SENSOR_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4), | |
747 | SENSOR_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 5), | |
748 | SENSOR_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 13), | |
749 | }; | |
9873964d CS |
750 | |
751 | /* get reatime status of all sensors items: voltage, temp, fan */ | |
752 | static ssize_t show_alarms_reg(struct device *dev, | |
753 | struct device_attribute *attr, char *buf) | |
754 | { | |
755 | struct w83791d_data *data = w83791d_update_device(dev); | |
756 | return sprintf(buf, "%u\n", data->alarms); | |
757 | } | |
758 | ||
759 | static DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL); | |
760 | ||
761 | /* Beep control */ | |
762 | ||
763 | #define GLOBAL_BEEP_ENABLE_SHIFT 15 | |
764 | #define GLOBAL_BEEP_ENABLE_MASK (1 << GLOBAL_BEEP_ENABLE_SHIFT) | |
765 | ||
766 | static ssize_t show_beep_enable(struct device *dev, | |
767 | struct device_attribute *attr, char *buf) | |
768 | { | |
769 | struct w83791d_data *data = w83791d_update_device(dev); | |
770 | return sprintf(buf, "%d\n", data->beep_enable); | |
771 | } | |
772 | ||
773 | static ssize_t show_beep_mask(struct device *dev, | |
774 | struct device_attribute *attr, char *buf) | |
775 | { | |
776 | struct w83791d_data *data = w83791d_update_device(dev); | |
777 | return sprintf(buf, "%d\n", BEEP_MASK_FROM_REG(data->beep_mask)); | |
778 | } | |
779 | ||
780 | ||
781 | static ssize_t store_beep_mask(struct device *dev, | |
782 | struct device_attribute *attr, | |
783 | const char *buf, size_t count) | |
784 | { | |
785 | struct i2c_client *client = to_i2c_client(dev); | |
786 | struct w83791d_data *data = i2c_get_clientdata(client); | |
787 | long val = simple_strtol(buf, NULL, 10); | |
788 | int i; | |
789 | ||
790 | mutex_lock(&data->update_lock); | |
791 | ||
792 | /* The beep_enable state overrides any enabling request from | |
793 | the masks */ | |
794 | data->beep_mask = BEEP_MASK_TO_REG(val) & ~GLOBAL_BEEP_ENABLE_MASK; | |
795 | data->beep_mask |= (data->beep_enable << GLOBAL_BEEP_ENABLE_SHIFT); | |
796 | ||
797 | val = data->beep_mask; | |
798 | ||
799 | for (i = 0; i < 3; i++) { | |
800 | w83791d_write(client, W83791D_REG_BEEP_CTRL[i], (val & 0xff)); | |
801 | val >>= 8; | |
802 | } | |
803 | ||
804 | mutex_unlock(&data->update_lock); | |
805 | ||
806 | return count; | |
807 | } | |
808 | ||
809 | static ssize_t store_beep_enable(struct device *dev, | |
810 | struct device_attribute *attr, | |
811 | const char *buf, size_t count) | |
812 | { | |
813 | struct i2c_client *client = to_i2c_client(dev); | |
814 | struct w83791d_data *data = i2c_get_clientdata(client); | |
815 | long val = simple_strtol(buf, NULL, 10); | |
816 | ||
817 | mutex_lock(&data->update_lock); | |
818 | ||
819 | data->beep_enable = val ? 1 : 0; | |
820 | ||
821 | /* Keep the full mask value in sync with the current enable */ | |
822 | data->beep_mask &= ~GLOBAL_BEEP_ENABLE_MASK; | |
823 | data->beep_mask |= (data->beep_enable << GLOBAL_BEEP_ENABLE_SHIFT); | |
824 | ||
825 | /* The global control is in the second beep control register | |
826 | so only need to update that register */ | |
827 | val = (data->beep_mask >> 8) & 0xff; | |
828 | ||
829 | w83791d_write(client, W83791D_REG_BEEP_CTRL[1], val); | |
830 | ||
831 | mutex_unlock(&data->update_lock); | |
832 | ||
833 | return count; | |
834 | } | |
835 | ||
836 | static struct sensor_device_attribute sda_beep_ctrl[] = { | |
837 | SENSOR_ATTR(beep_enable, S_IRUGO | S_IWUSR, | |
838 | show_beep_enable, store_beep_enable, 0), | |
839 | SENSOR_ATTR(beep_mask, S_IRUGO | S_IWUSR, | |
840 | show_beep_mask, store_beep_mask, 1) | |
841 | }; | |
842 | ||
843 | /* cpu voltage regulation information */ | |
844 | static ssize_t show_vid_reg(struct device *dev, | |
845 | struct device_attribute *attr, char *buf) | |
846 | { | |
847 | struct w83791d_data *data = w83791d_update_device(dev); | |
848 | return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm)); | |
849 | } | |
850 | ||
851 | static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL); | |
852 | ||
853 | static ssize_t show_vrm_reg(struct device *dev, | |
854 | struct device_attribute *attr, char *buf) | |
855 | { | |
90d6619a | 856 | struct w83791d_data *data = dev_get_drvdata(dev); |
9873964d CS |
857 | return sprintf(buf, "%d\n", data->vrm); |
858 | } | |
859 | ||
860 | static ssize_t store_vrm_reg(struct device *dev, | |
861 | struct device_attribute *attr, | |
862 | const char *buf, size_t count) | |
863 | { | |
8f74efe8 | 864 | struct w83791d_data *data = dev_get_drvdata(dev); |
9873964d CS |
865 | |
866 | /* No lock needed as vrm is internal to the driver | |
867 | (not read from a chip register) and so is not | |
868 | updated in w83791d_update_device() */ | |
8f74efe8 | 869 | data->vrm = simple_strtoul(buf, NULL, 10); |
9873964d CS |
870 | |
871 | return count; | |
872 | } | |
873 | ||
874 | static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg); | |
875 | ||
34fc921a JC |
876 | #define IN_UNIT_ATTRS(X) \ |
877 | &sda_in_input[X].dev_attr.attr, \ | |
878 | &sda_in_min[X].dev_attr.attr, \ | |
64383123 CS |
879 | &sda_in_max[X].dev_attr.attr, \ |
880 | &sda_in_beep[X].dev_attr.attr, \ | |
881 | &sda_in_alarm[X].dev_attr.attr | |
34fc921a JC |
882 | |
883 | #define FAN_UNIT_ATTRS(X) \ | |
884 | &sda_fan_input[X].dev_attr.attr, \ | |
885 | &sda_fan_min[X].dev_attr.attr, \ | |
64383123 CS |
886 | &sda_fan_div[X].dev_attr.attr, \ |
887 | &sda_fan_beep[X].dev_attr.attr, \ | |
888 | &sda_fan_alarm[X].dev_attr.attr | |
34fc921a JC |
889 | |
890 | #define TEMP_UNIT_ATTRS(X) \ | |
891 | &sda_temp_input[X].dev_attr.attr, \ | |
892 | &sda_temp_max[X].dev_attr.attr, \ | |
64383123 CS |
893 | &sda_temp_max_hyst[X].dev_attr.attr, \ |
894 | &sda_temp_beep[X].dev_attr.attr, \ | |
895 | &sda_temp_alarm[X].dev_attr.attr | |
34fc921a JC |
896 | |
897 | static struct attribute *w83791d_attributes[] = { | |
898 | IN_UNIT_ATTRS(0), | |
899 | IN_UNIT_ATTRS(1), | |
900 | IN_UNIT_ATTRS(2), | |
901 | IN_UNIT_ATTRS(3), | |
902 | IN_UNIT_ATTRS(4), | |
903 | IN_UNIT_ATTRS(5), | |
904 | IN_UNIT_ATTRS(6), | |
905 | IN_UNIT_ATTRS(7), | |
906 | IN_UNIT_ATTRS(8), | |
907 | IN_UNIT_ATTRS(9), | |
908 | FAN_UNIT_ATTRS(0), | |
909 | FAN_UNIT_ATTRS(1), | |
910 | FAN_UNIT_ATTRS(2), | |
911 | FAN_UNIT_ATTRS(3), | |
912 | FAN_UNIT_ATTRS(4), | |
913 | TEMP_UNIT_ATTRS(0), | |
914 | TEMP_UNIT_ATTRS(1), | |
915 | TEMP_UNIT_ATTRS(2), | |
916 | &dev_attr_alarms.attr, | |
917 | &sda_beep_ctrl[0].dev_attr.attr, | |
918 | &sda_beep_ctrl[1].dev_attr.attr, | |
919 | &dev_attr_cpu0_vid.attr, | |
920 | &dev_attr_vrm.attr, | |
921 | NULL | |
922 | }; | |
923 | ||
924 | static const struct attribute_group w83791d_group = { | |
925 | .attrs = w83791d_attributes, | |
926 | }; | |
927 | ||
9873964d | 928 | |
cb0c1af3 | 929 | static int w83791d_detect_subclients(struct i2c_client *client) |
9873964d | 930 | { |
cb0c1af3 | 931 | struct i2c_adapter *adapter = client->adapter; |
9873964d | 932 | struct w83791d_data *data = i2c_get_clientdata(client); |
cb0c1af3 | 933 | int address = client->addr; |
9873964d CS |
934 | int i, id, err; |
935 | u8 val; | |
936 | ||
937 | id = i2c_adapter_id(adapter); | |
938 | if (force_subclients[0] == id && force_subclients[1] == address) { | |
939 | for (i = 2; i <= 3; i++) { | |
940 | if (force_subclients[i] < 0x48 || | |
941 | force_subclients[i] > 0x4f) { | |
942 | dev_err(&client->dev, | |
943 | "invalid subclient " | |
944 | "address %d; must be 0x48-0x4f\n", | |
945 | force_subclients[i]); | |
946 | err = -ENODEV; | |
947 | goto error_sc_0; | |
948 | } | |
949 | } | |
950 | w83791d_write(client, W83791D_REG_I2C_SUBADDR, | |
951 | (force_subclients[2] & 0x07) | | |
952 | ((force_subclients[3] & 0x07) << 4)); | |
953 | } | |
954 | ||
955 | val = w83791d_read(client, W83791D_REG_I2C_SUBADDR); | |
956 | if (!(val & 0x08)) { | |
cb0c1af3 | 957 | data->lm75[0] = i2c_new_dummy(adapter, 0x48 + (val & 0x7)); |
9873964d CS |
958 | } |
959 | if (!(val & 0x80)) { | |
960 | if ((data->lm75[0] != NULL) && | |
961 | ((val & 0x7) == ((val >> 4) & 0x7))) { | |
962 | dev_err(&client->dev, | |
963 | "duplicate addresses 0x%x, " | |
964 | "use force_subclient\n", | |
965 | data->lm75[0]->addr); | |
966 | err = -ENODEV; | |
967 | goto error_sc_1; | |
968 | } | |
cb0c1af3 JD |
969 | data->lm75[1] = i2c_new_dummy(adapter, |
970 | 0x48 + ((val >> 4) & 0x7)); | |
9873964d CS |
971 | } |
972 | ||
973 | return 0; | |
974 | ||
975 | /* Undo inits in case of errors */ | |
976 | ||
977 | error_sc_1: | |
cb0c1af3 JD |
978 | if (data->lm75[0] != NULL) |
979 | i2c_unregister_device(data->lm75[0]); | |
9873964d CS |
980 | error_sc_0: |
981 | return err; | |
982 | } | |
983 | ||
984 | ||
cb0c1af3 JD |
985 | /* Return 0 if detection is successful, -ENODEV otherwise */ |
986 | static int w83791d_detect(struct i2c_client *client, int kind, | |
987 | struct i2c_board_info *info) | |
9873964d | 988 | { |
cb0c1af3 JD |
989 | struct i2c_adapter *adapter = client->adapter; |
990 | int val1, val2; | |
991 | unsigned short address = client->addr; | |
9873964d CS |
992 | |
993 | if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { | |
cb0c1af3 | 994 | return -ENODEV; |
9873964d CS |
995 | } |
996 | ||
9873964d CS |
997 | /* The w83791d may be stuck in some other bank than bank 0. This may |
998 | make reading other information impossible. Specify a force=... | |
999 | parameter, and the Winbond will be reset to the right bank. */ | |
1000 | if (kind < 0) { | |
1001 | if (w83791d_read(client, W83791D_REG_CONFIG) & 0x80) { | |
cb0c1af3 | 1002 | return -ENODEV; |
9873964d CS |
1003 | } |
1004 | val1 = w83791d_read(client, W83791D_REG_BANK); | |
1005 | val2 = w83791d_read(client, W83791D_REG_CHIPMAN); | |
1006 | /* Check for Winbond ID if in bank 0 */ | |
1007 | if (!(val1 & 0x07)) { | |
1008 | /* yes it is Bank0 */ | |
1009 | if (((!(val1 & 0x80)) && (val2 != 0xa3)) || | |
1010 | ((val1 & 0x80) && (val2 != 0x5c))) { | |
cb0c1af3 | 1011 | return -ENODEV; |
9873964d CS |
1012 | } |
1013 | } | |
1014 | /* If Winbond chip, address of chip and W83791D_REG_I2C_ADDR | |
1015 | should match */ | |
1016 | if (w83791d_read(client, W83791D_REG_I2C_ADDR) != address) { | |
cb0c1af3 | 1017 | return -ENODEV; |
9873964d CS |
1018 | } |
1019 | } | |
1020 | ||
1021 | /* We either have a force parameter or we have reason to | |
1022 | believe it is a Winbond chip. Either way, we want bank 0 and | |
1023 | Vendor ID high byte */ | |
1024 | val1 = w83791d_read(client, W83791D_REG_BANK) & 0x78; | |
1025 | w83791d_write(client, W83791D_REG_BANK, val1 | 0x80); | |
1026 | ||
1027 | /* Verify it is a Winbond w83791d */ | |
1028 | if (kind <= 0) { | |
1029 | /* get vendor ID */ | |
1030 | val2 = w83791d_read(client, W83791D_REG_CHIPMAN); | |
1031 | if (val2 != 0x5c) { /* the vendor is NOT Winbond */ | |
cb0c1af3 | 1032 | return -ENODEV; |
9873964d CS |
1033 | } |
1034 | val1 = w83791d_read(client, W83791D_REG_WCHIPID); | |
1035 | if (val1 == 0x71) { | |
1036 | kind = w83791d; | |
1037 | } else { | |
1038 | if (kind == 0) | |
cb0c1af3 | 1039 | dev_warn(&adapter->dev, |
9873964d CS |
1040 | "w83791d: Ignoring 'force' parameter " |
1041 | "for unknown chip at adapter %d, " | |
1042 | "address 0x%02x\n", | |
1043 | i2c_adapter_id(adapter), address); | |
cb0c1af3 | 1044 | return -ENODEV; |
9873964d CS |
1045 | } |
1046 | } | |
1047 | ||
cb0c1af3 JD |
1048 | strlcpy(info->type, "w83791d", I2C_NAME_SIZE); |
1049 | ||
1050 | return 0; | |
1051 | } | |
1052 | ||
1053 | static int w83791d_probe(struct i2c_client *client, | |
1054 | const struct i2c_device_id *id) | |
1055 | { | |
1056 | struct w83791d_data *data; | |
1057 | struct device *dev = &client->dev; | |
1058 | int i, val1, err; | |
9873964d CS |
1059 | |
1060 | #ifdef DEBUG | |
1061 | val1 = w83791d_read(client, W83791D_REG_DID_VID4); | |
1062 | dev_dbg(dev, "Device ID version: %d.%d (0x%02x)\n", | |
1063 | (val1 >> 5) & 0x07, (val1 >> 1) & 0x0f, val1); | |
1064 | #endif | |
1065 | ||
cb0c1af3 JD |
1066 | data = kzalloc(sizeof(struct w83791d_data), GFP_KERNEL); |
1067 | if (!data) { | |
1068 | err = -ENOMEM; | |
1069 | goto error0; | |
1070 | } | |
9873964d | 1071 | |
cb0c1af3 JD |
1072 | i2c_set_clientdata(client, data); |
1073 | mutex_init(&data->update_lock); | |
9873964d | 1074 | |
cb0c1af3 JD |
1075 | err = w83791d_detect_subclients(client); |
1076 | if (err) | |
1077 | goto error1; | |
9873964d CS |
1078 | |
1079 | /* Initialize the chip */ | |
1080 | w83791d_init_client(client); | |
1081 | ||
1082 | /* If the fan_div is changed, make sure there is a rational | |
1083 | fan_min in place */ | |
1084 | for (i = 0; i < NUMBER_OF_FANIN; i++) { | |
1085 | data->fan_min[i] = w83791d_read(client, W83791D_REG_FAN_MIN[i]); | |
1086 | } | |
1087 | ||
1088 | /* Register sysfs hooks */ | |
34fc921a JC |
1089 | if ((err = sysfs_create_group(&client->dev.kobj, &w83791d_group))) |
1090 | goto error3; | |
1091 | ||
1092 | /* Everything is ready, now register the working device */ | |
1beeffe4 TJ |
1093 | data->hwmon_dev = hwmon_device_register(dev); |
1094 | if (IS_ERR(data->hwmon_dev)) { | |
1095 | err = PTR_ERR(data->hwmon_dev); | |
34fc921a | 1096 | goto error4; |
9873964d CS |
1097 | } |
1098 | ||
9873964d CS |
1099 | return 0; |
1100 | ||
34fc921a JC |
1101 | error4: |
1102 | sysfs_remove_group(&client->dev.kobj, &w83791d_group); | |
9873964d | 1103 | error3: |
cb0c1af3 JD |
1104 | if (data->lm75[0] != NULL) |
1105 | i2c_unregister_device(data->lm75[0]); | |
1106 | if (data->lm75[1] != NULL) | |
1107 | i2c_unregister_device(data->lm75[1]); | |
9873964d CS |
1108 | error1: |
1109 | kfree(data); | |
1110 | error0: | |
1111 | return err; | |
1112 | } | |
1113 | ||
cb0c1af3 | 1114 | static int w83791d_remove(struct i2c_client *client) |
9873964d CS |
1115 | { |
1116 | struct w83791d_data *data = i2c_get_clientdata(client); | |
9873964d | 1117 | |
cb0c1af3 JD |
1118 | hwmon_device_unregister(data->hwmon_dev); |
1119 | sysfs_remove_group(&client->dev.kobj, &w83791d_group); | |
9873964d | 1120 | |
cb0c1af3 JD |
1121 | if (data->lm75[0] != NULL) |
1122 | i2c_unregister_device(data->lm75[0]); | |
1123 | if (data->lm75[1] != NULL) | |
1124 | i2c_unregister_device(data->lm75[1]); | |
9873964d | 1125 | |
cb0c1af3 | 1126 | kfree(data); |
9873964d CS |
1127 | return 0; |
1128 | } | |
1129 | ||
1130 | static void w83791d_init_client(struct i2c_client *client) | |
1131 | { | |
1132 | struct w83791d_data *data = i2c_get_clientdata(client); | |
1133 | u8 tmp; | |
1134 | u8 old_beep; | |
1135 | ||
1136 | /* The difference between reset and init is that reset | |
1137 | does a hard reset of the chip via index 0x40, bit 7, | |
1138 | but init simply forces certain registers to have "sane" | |
1139 | values. The hope is that the BIOS has done the right | |
1140 | thing (which is why the default is reset=0, init=0), | |
1141 | but if not, reset is the hard hammer and init | |
1142 | is the soft mallet both of which are trying to whack | |
1143 | things into place... | |
1144 | NOTE: The data sheet makes a distinction between | |
1145 | "power on defaults" and "reset by MR". As far as I can tell, | |
1146 | the hard reset puts everything into a power-on state so I'm | |
1147 | not sure what "reset by MR" means or how it can happen. | |
1148 | */ | |
1149 | if (reset || init) { | |
1150 | /* keep some BIOS settings when we... */ | |
1151 | old_beep = w83791d_read(client, W83791D_REG_BEEP_CONFIG); | |
1152 | ||
1153 | if (reset) { | |
1154 | /* ... reset the chip and ... */ | |
1155 | w83791d_write(client, W83791D_REG_CONFIG, 0x80); | |
1156 | } | |
1157 | ||
1158 | /* ... disable power-on abnormal beep */ | |
1159 | w83791d_write(client, W83791D_REG_BEEP_CONFIG, old_beep | 0x80); | |
1160 | ||
1161 | /* disable the global beep (not done by hard reset) */ | |
1162 | tmp = w83791d_read(client, W83791D_REG_BEEP_CTRL[1]); | |
1163 | w83791d_write(client, W83791D_REG_BEEP_CTRL[1], tmp & 0xef); | |
1164 | ||
1165 | if (init) { | |
1166 | /* Make sure monitoring is turned on for add-ons */ | |
1167 | tmp = w83791d_read(client, W83791D_REG_TEMP2_CONFIG); | |
1168 | if (tmp & 1) { | |
1169 | w83791d_write(client, W83791D_REG_TEMP2_CONFIG, | |
1170 | tmp & 0xfe); | |
1171 | } | |
1172 | ||
1173 | tmp = w83791d_read(client, W83791D_REG_TEMP3_CONFIG); | |
1174 | if (tmp & 1) { | |
1175 | w83791d_write(client, W83791D_REG_TEMP3_CONFIG, | |
1176 | tmp & 0xfe); | |
1177 | } | |
1178 | ||
1179 | /* Start monitoring */ | |
1180 | tmp = w83791d_read(client, W83791D_REG_CONFIG) & 0xf7; | |
1181 | w83791d_write(client, W83791D_REG_CONFIG, tmp | 0x01); | |
1182 | } | |
1183 | } | |
1184 | ||
1185 | data->vrm = vid_which_vrm(); | |
1186 | } | |
1187 | ||
1188 | static struct w83791d_data *w83791d_update_device(struct device *dev) | |
1189 | { | |
1190 | struct i2c_client *client = to_i2c_client(dev); | |
1191 | struct w83791d_data *data = i2c_get_clientdata(client); | |
1192 | int i, j; | |
1193 | u8 reg_array_tmp[3]; | |
ad02ad85 | 1194 | u8 vbat_reg; |
9873964d CS |
1195 | |
1196 | mutex_lock(&data->update_lock); | |
1197 | ||
1198 | if (time_after(jiffies, data->last_updated + (HZ * 3)) | |
1199 | || !data->valid) { | |
1200 | dev_dbg(dev, "Starting w83791d device update\n"); | |
1201 | ||
1202 | /* Update the voltages measured value and limits */ | |
1203 | for (i = 0; i < NUMBER_OF_VIN; i++) { | |
1204 | data->in[i] = w83791d_read(client, | |
1205 | W83791D_REG_IN[i]); | |
1206 | data->in_max[i] = w83791d_read(client, | |
1207 | W83791D_REG_IN_MAX[i]); | |
1208 | data->in_min[i] = w83791d_read(client, | |
1209 | W83791D_REG_IN_MIN[i]); | |
1210 | } | |
1211 | ||
1212 | /* Update the fan counts and limits */ | |
1213 | for (i = 0; i < NUMBER_OF_FANIN; i++) { | |
1214 | /* Update the Fan measured value and limits */ | |
1215 | data->fan[i] = w83791d_read(client, | |
1216 | W83791D_REG_FAN[i]); | |
1217 | data->fan_min[i] = w83791d_read(client, | |
1218 | W83791D_REG_FAN_MIN[i]); | |
1219 | } | |
1220 | ||
1221 | /* Update the fan divisor */ | |
1222 | for (i = 0; i < 3; i++) { | |
1223 | reg_array_tmp[i] = w83791d_read(client, | |
1224 | W83791D_REG_FAN_DIV[i]); | |
1225 | } | |
1226 | data->fan_div[0] = (reg_array_tmp[0] >> 4) & 0x03; | |
1227 | data->fan_div[1] = (reg_array_tmp[0] >> 6) & 0x03; | |
1228 | data->fan_div[2] = (reg_array_tmp[1] >> 6) & 0x03; | |
1229 | data->fan_div[3] = reg_array_tmp[2] & 0x07; | |
1230 | data->fan_div[4] = (reg_array_tmp[2] >> 4) & 0x07; | |
1231 | ||
ad02ad85 MH |
1232 | /* The fan divisor for fans 0-2 get bit 2 from |
1233 | bits 5-7 respectively of vbat register */ | |
1234 | vbat_reg = w83791d_read(client, W83791D_REG_VBAT); | |
1235 | for (i = 0; i < 3; i++) | |
1236 | data->fan_div[i] |= (vbat_reg >> (3 + i)) & 0x04; | |
1237 | ||
9873964d CS |
1238 | /* Update the first temperature sensor */ |
1239 | for (i = 0; i < 3; i++) { | |
1240 | data->temp1[i] = w83791d_read(client, | |
1241 | W83791D_REG_TEMP1[i]); | |
1242 | } | |
1243 | ||
1244 | /* Update the rest of the temperature sensors */ | |
1245 | for (i = 0; i < 2; i++) { | |
1246 | for (j = 0; j < 3; j++) { | |
1247 | data->temp_add[i][j] = | |
1248 | (w83791d_read(client, | |
1249 | W83791D_REG_TEMP_ADD[i][j * 2]) << 8) | | |
1250 | w83791d_read(client, | |
1251 | W83791D_REG_TEMP_ADD[i][j * 2 + 1]); | |
1252 | } | |
1253 | } | |
1254 | ||
1255 | /* Update the realtime status */ | |
1256 | data->alarms = | |
1257 | w83791d_read(client, W83791D_REG_ALARM1) + | |
1258 | (w83791d_read(client, W83791D_REG_ALARM2) << 8) + | |
1259 | (w83791d_read(client, W83791D_REG_ALARM3) << 16); | |
1260 | ||
1261 | /* Update the beep configuration information */ | |
1262 | data->beep_mask = | |
1263 | w83791d_read(client, W83791D_REG_BEEP_CTRL[0]) + | |
1264 | (w83791d_read(client, W83791D_REG_BEEP_CTRL[1]) << 8) + | |
1265 | (w83791d_read(client, W83791D_REG_BEEP_CTRL[2]) << 16); | |
1266 | ||
125751cb | 1267 | /* Extract global beep enable flag */ |
9873964d CS |
1268 | data->beep_enable = |
1269 | (data->beep_mask >> GLOBAL_BEEP_ENABLE_SHIFT) & 0x01; | |
1270 | ||
1271 | /* Update the cpu voltage information */ | |
1272 | i = w83791d_read(client, W83791D_REG_VID_FANDIV); | |
1273 | data->vid = i & 0x0f; | |
1274 | data->vid |= (w83791d_read(client, W83791D_REG_DID_VID4) & 0x01) | |
1275 | << 4; | |
1276 | ||
1277 | data->last_updated = jiffies; | |
1278 | data->valid = 1; | |
1279 | } | |
1280 | ||
1281 | mutex_unlock(&data->update_lock); | |
1282 | ||
1283 | #ifdef DEBUG | |
1284 | w83791d_print_debug(data, dev); | |
1285 | #endif | |
1286 | ||
1287 | return data; | |
1288 | } | |
1289 | ||
1290 | #ifdef DEBUG | |
1291 | static void w83791d_print_debug(struct w83791d_data *data, struct device *dev) | |
1292 | { | |
1293 | int i = 0, j = 0; | |
1294 | ||
1295 | dev_dbg(dev, "======Start of w83791d debug values======\n"); | |
1296 | dev_dbg(dev, "%d set of Voltages: ===>\n", NUMBER_OF_VIN); | |
1297 | for (i = 0; i < NUMBER_OF_VIN; i++) { | |
1298 | dev_dbg(dev, "vin[%d] is: 0x%02x\n", i, data->in[i]); | |
1299 | dev_dbg(dev, "vin[%d] min is: 0x%02x\n", i, data->in_min[i]); | |
1300 | dev_dbg(dev, "vin[%d] max is: 0x%02x\n", i, data->in_max[i]); | |
1301 | } | |
1302 | dev_dbg(dev, "%d set of Fan Counts/Divisors: ===>\n", NUMBER_OF_FANIN); | |
1303 | for (i = 0; i < NUMBER_OF_FANIN; i++) { | |
1304 | dev_dbg(dev, "fan[%d] is: 0x%02x\n", i, data->fan[i]); | |
1305 | dev_dbg(dev, "fan[%d] min is: 0x%02x\n", i, data->fan_min[i]); | |
1306 | dev_dbg(dev, "fan_div[%d] is: 0x%02x\n", i, data->fan_div[i]); | |
1307 | } | |
1308 | ||
1309 | /* temperature math is signed, but only print out the | |
1310 | bits that matter */ | |
1311 | dev_dbg(dev, "%d set of Temperatures: ===>\n", NUMBER_OF_TEMPIN); | |
1312 | for (i = 0; i < 3; i++) { | |
1313 | dev_dbg(dev, "temp1[%d] is: 0x%02x\n", i, (u8) data->temp1[i]); | |
1314 | } | |
1315 | for (i = 0; i < 2; i++) { | |
1316 | for (j = 0; j < 3; j++) { | |
1317 | dev_dbg(dev, "temp_add[%d][%d] is: 0x%04x\n", i, j, | |
1318 | (u16) data->temp_add[i][j]); | |
1319 | } | |
1320 | } | |
1321 | ||
1322 | dev_dbg(dev, "Misc Information: ===>\n"); | |
1323 | dev_dbg(dev, "alarm is: 0x%08x\n", data->alarms); | |
1324 | dev_dbg(dev, "beep_mask is: 0x%08x\n", data->beep_mask); | |
1325 | dev_dbg(dev, "beep_enable is: %d\n", data->beep_enable); | |
1326 | dev_dbg(dev, "vid is: 0x%02x\n", data->vid); | |
1327 | dev_dbg(dev, "vrm is: 0x%02x\n", data->vrm); | |
1328 | dev_dbg(dev, "=======End of w83791d debug values========\n"); | |
1329 | dev_dbg(dev, "\n"); | |
1330 | } | |
1331 | #endif | |
1332 | ||
1333 | static int __init sensors_w83791d_init(void) | |
1334 | { | |
1335 | return i2c_add_driver(&w83791d_driver); | |
1336 | } | |
1337 | ||
1338 | static void __exit sensors_w83791d_exit(void) | |
1339 | { | |
1340 | i2c_del_driver(&w83791d_driver); | |
1341 | } | |
1342 | ||
1343 | MODULE_AUTHOR("Charles Spirakis <bezaur@gmail.com>"); | |
1344 | MODULE_DESCRIPTION("W83791D driver"); | |
1345 | MODULE_LICENSE("GPL"); | |
1346 | ||
1347 | module_init(sensors_w83791d_init); | |
1348 | module_exit(sensors_w83791d_exit); |