i2c: Improve logging on failure to probe for ->class devices
[deliverable/linux.git] / drivers / i2c / busses / i2c-piix4.c
CommitLineData
1da177e4 1/*
1da177e4
LT
2 Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl> and
3 Philip Edelbrock <phil@netroedge.com>
4
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
9
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
14
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the Free Software
17 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
18*/
19
20/*
21 Supports:
22 Intel PIIX4, 440MX
506a8b6c 23 Serverworks OSB4, CSB5, CSB6, HT-1000, HT-1100
2a2f7404 24 ATI IXP200, IXP300, IXP400, SB600, SB700/SP5100, SB800
b996ac90 25 AMD Hudson-2, CZ
1da177e4
LT
26 SMSC Victory66
27
2a2f7404
AA
28 Note: we assume there can only be one device, with one or more
29 SMBus interfaces.
1da177e4
LT
30*/
31
1da177e4
LT
32#include <linux/module.h>
33#include <linux/moduleparam.h>
34#include <linux/pci.h>
35#include <linux/kernel.h>
36#include <linux/delay.h>
37#include <linux/stddef.h>
1da177e4
LT
38#include <linux/ioport.h>
39#include <linux/i2c.h>
c415b303 40#include <linux/slab.h>
1da177e4 41#include <linux/init.h>
1da177e4 42#include <linux/dmi.h>
54fb4a05 43#include <linux/acpi.h>
21782180 44#include <linux/io.h>
1da177e4
LT
45
46
1da177e4
LT
47/* PIIX4 SMBus address offsets */
48#define SMBHSTSTS (0 + piix4_smba)
49#define SMBHSLVSTS (1 + piix4_smba)
50#define SMBHSTCNT (2 + piix4_smba)
51#define SMBHSTCMD (3 + piix4_smba)
52#define SMBHSTADD (4 + piix4_smba)
53#define SMBHSTDAT0 (5 + piix4_smba)
54#define SMBHSTDAT1 (6 + piix4_smba)
55#define SMBBLKDAT (7 + piix4_smba)
56#define SMBSLVCNT (8 + piix4_smba)
57#define SMBSHDWCMD (9 + piix4_smba)
58#define SMBSLVEVT (0xA + piix4_smba)
59#define SMBSLVDAT (0xC + piix4_smba)
60
61/* count for request_region */
62#define SMBIOSIZE 8
63
64/* PCI Address Constants */
65#define SMBBA 0x090
66#define SMBHSTCFG 0x0D2
67#define SMBSLVC 0x0D3
68#define SMBSHDW1 0x0D4
69#define SMBSHDW2 0x0D5
70#define SMBREV 0x0D6
71
72/* Other settings */
73#define MAX_TIMEOUT 500
74#define ENABLE_INT9 0
75
76/* PIIX4 constants */
77#define PIIX4_QUICK 0x00
78#define PIIX4_BYTE 0x04
79#define PIIX4_BYTE_DATA 0x08
80#define PIIX4_WORD_DATA 0x0C
81#define PIIX4_BLOCK_DATA 0x14
82
83/* insmod parameters */
84
85/* If force is set to anything different from 0, we forcibly enable the
86 PIIX4. DANGEROUS! */
60507095 87static int force;
1da177e4
LT
88module_param (force, int, 0);
89MODULE_PARM_DESC(force, "Forcibly enable the PIIX4. DANGEROUS!");
90
91/* If force_addr is set to anything different from 0, we forcibly enable
92 the PIIX4 at the given address. VERY DANGEROUS! */
60507095 93static int force_addr;
1da177e4
LT
94module_param (force_addr, int, 0);
95MODULE_PARM_DESC(force_addr,
96 "Forcibly enable the PIIX4 at the given address. "
97 "EXTREMELY DANGEROUS!");
98
b1c1759c 99static int srvrworks_csb5_delay;
d6072f84 100static struct pci_driver piix4_driver;
1da177e4 101
0b255e92 102static const struct dmi_system_id piix4_dmi_blacklist[] = {
c2fc54fc
JD
103 {
104 .ident = "Sapphire AM2RD790",
105 .matches = {
106 DMI_MATCH(DMI_BOARD_VENDOR, "SAPPHIRE Inc."),
107 DMI_MATCH(DMI_BOARD_NAME, "PC-AM2RD790"),
108 },
109 },
110 {
111 .ident = "DFI Lanparty UT 790FX",
112 .matches = {
113 DMI_MATCH(DMI_BOARD_VENDOR, "DFI Inc."),
114 DMI_MATCH(DMI_BOARD_NAME, "LP UT 790FX"),
115 },
116 },
117 { }
118};
119
120/* The IBM entry is in a separate table because we only check it
121 on Intel-based systems */
0b255e92 122static const struct dmi_system_id piix4_dmi_ibm[] = {
1da177e4
LT
123 {
124 .ident = "IBM",
125 .matches = { DMI_MATCH(DMI_SYS_VENDOR, "IBM"), },
126 },
127 { },
128};
129
14a8086d
AA
130struct i2c_piix4_adapdata {
131 unsigned short smba;
132};
133
0b255e92
BP
134static int piix4_setup(struct pci_dev *PIIX4_dev,
135 const struct pci_device_id *id)
1da177e4
LT
136{
137 unsigned char temp;
14a8086d 138 unsigned short piix4_smba;
1da177e4 139
b1c1759c
DM
140 if ((PIIX4_dev->vendor == PCI_VENDOR_ID_SERVERWORKS) &&
141 (PIIX4_dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5))
142 srvrworks_csb5_delay = 1;
143
c2fc54fc
JD
144 /* On some motherboards, it was reported that accessing the SMBus
145 caused severe hardware problems */
146 if (dmi_check_system(piix4_dmi_blacklist)) {
147 dev_err(&PIIX4_dev->dev,
148 "Accessing the SMBus on this system is unsafe!\n");
149 return -EPERM;
150 }
151
1da177e4 152 /* Don't access SMBus on IBM systems which get corrupted eeproms */
c2fc54fc 153 if (dmi_check_system(piix4_dmi_ibm) &&
1da177e4 154 PIIX4_dev->vendor == PCI_VENDOR_ID_INTEL) {
f9ba6c04 155 dev_err(&PIIX4_dev->dev, "IBM system detected; this module "
1da177e4
LT
156 "may corrupt your serial eeprom! Refusing to load "
157 "module!\n");
158 return -EPERM;
159 }
160
161 /* Determine the address of the SMBus areas */
162 if (force_addr) {
163 piix4_smba = force_addr & 0xfff0;
164 force = 0;
165 } else {
166 pci_read_config_word(PIIX4_dev, SMBBA, &piix4_smba);
167 piix4_smba &= 0xfff0;
168 if(piix4_smba == 0) {
fa63cd56 169 dev_err(&PIIX4_dev->dev, "SMBus base address "
1da177e4
LT
170 "uninitialized - upgrade BIOS or use "
171 "force_addr=0xaddr\n");
172 return -ENODEV;
173 }
174 }
175
54fb4a05 176 if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name))
18669eab 177 return -ENODEV;
54fb4a05 178
d6072f84 179 if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) {
fa63cd56 180 dev_err(&PIIX4_dev->dev, "SMBus region 0x%x already in use!\n",
1da177e4 181 piix4_smba);
fa63cd56 182 return -EBUSY;
1da177e4
LT
183 }
184
185 pci_read_config_byte(PIIX4_dev, SMBHSTCFG, &temp);
186
1da177e4
LT
187 /* If force_addr is set, we program the new address here. Just to make
188 sure, we disable the PIIX4 first. */
189 if (force_addr) {
190 pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp & 0xfe);
191 pci_write_config_word(PIIX4_dev, SMBBA, piix4_smba);
192 pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp | 0x01);
193 dev_info(&PIIX4_dev->dev, "WARNING: SMBus interface set to "
194 "new address %04x!\n", piix4_smba);
195 } else if ((temp & 1) == 0) {
196 if (force) {
197 /* This should never need to be done, but has been
198 * noted that many Dell machines have the SMBus
199 * interface on the PIIX4 disabled!? NOTE: This assumes
200 * I/O space and other allocations WERE done by the
201 * Bios! Don't complain if your hardware does weird
202 * things after enabling this. :') Check for Bios
203 * updates before resorting to this.
204 */
205 pci_write_config_byte(PIIX4_dev, SMBHSTCFG,
206 temp | 1);
8117e41e
JP
207 dev_notice(&PIIX4_dev->dev,
208 "WARNING: SMBus interface has been FORCEFULLY ENABLED!\n");
1da177e4
LT
209 } else {
210 dev_err(&PIIX4_dev->dev,
211 "Host SMBus controller not enabled!\n");
212 release_region(piix4_smba, SMBIOSIZE);
1da177e4
LT
213 return -ENODEV;
214 }
215 }
216
54aaa1ca 217 if (((temp & 0x0E) == 8) || ((temp & 0x0E) == 2))
1da177e4
LT
218 dev_dbg(&PIIX4_dev->dev, "Using Interrupt 9 for SMBus.\n");
219 else if ((temp & 0x0E) == 0)
220 dev_dbg(&PIIX4_dev->dev, "Using Interrupt SMI# for SMBus.\n");
221 else
222 dev_err(&PIIX4_dev->dev, "Illegal Interrupt configuration "
223 "(or code out of date)!\n");
224
225 pci_read_config_byte(PIIX4_dev, SMBREV, &temp);
fa63cd56
JD
226 dev_info(&PIIX4_dev->dev,
227 "SMBus Host Controller at 0x%x, revision %d\n",
228 piix4_smba, temp);
1da177e4 229
14a8086d 230 return piix4_smba;
1da177e4
LT
231}
232
0b255e92
BP
233static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
234 const struct pci_device_id *id)
87e1960e 235{
14a8086d 236 unsigned short piix4_smba;
87e1960e
SH
237 unsigned short smba_idx = 0xcd6;
238 u8 smba_en_lo, smba_en_hi, i2ccfg, i2ccfg_offset = 0x10, smb_en = 0x2c;
239
3806e94b 240 /* SB800 and later SMBus does not support forcing address */
87e1960e 241 if (force || force_addr) {
3806e94b 242 dev_err(&PIIX4_dev->dev, "SMBus does not support "
87e1960e
SH
243 "forcing address!\n");
244 return -EINVAL;
245 }
246
247 /* Determine the address of the SMBus areas */
248 if (!request_region(smba_idx, 2, "smba_idx")) {
249 dev_err(&PIIX4_dev->dev, "SMBus base address index region "
250 "0x%x already in use!\n", smba_idx);
251 return -EBUSY;
252 }
253 outb_p(smb_en, smba_idx);
254 smba_en_lo = inb_p(smba_idx + 1);
255 outb_p(smb_en + 1, smba_idx);
256 smba_en_hi = inb_p(smba_idx + 1);
257 release_region(smba_idx, 2);
258
259 if ((smba_en_lo & 1) == 0) {
260 dev_err(&PIIX4_dev->dev,
261 "Host SMBus controller not enabled!\n");
262 return -ENODEV;
263 }
264
265 piix4_smba = ((smba_en_hi << 8) | smba_en_lo) & 0xffe0;
266 if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name))
18669eab 267 return -ENODEV;
87e1960e
SH
268
269 if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) {
270 dev_err(&PIIX4_dev->dev, "SMBus region 0x%x already in use!\n",
271 piix4_smba);
272 return -EBUSY;
273 }
274
275 /* Request the SMBus I2C bus config region */
276 if (!request_region(piix4_smba + i2ccfg_offset, 1, "i2ccfg")) {
277 dev_err(&PIIX4_dev->dev, "SMBus I2C bus config region "
278 "0x%x already in use!\n", piix4_smba + i2ccfg_offset);
279 release_region(piix4_smba, SMBIOSIZE);
87e1960e
SH
280 return -EBUSY;
281 }
282 i2ccfg = inb_p(piix4_smba + i2ccfg_offset);
283 release_region(piix4_smba + i2ccfg_offset, 1);
284
285 if (i2ccfg & 1)
286 dev_dbg(&PIIX4_dev->dev, "Using IRQ for SMBus.\n");
287 else
288 dev_dbg(&PIIX4_dev->dev, "Using SMI# for SMBus.\n");
289
290 dev_info(&PIIX4_dev->dev,
291 "SMBus Host Controller at 0x%x, revision %d\n",
292 piix4_smba, i2ccfg >> 4);
293
14a8086d 294 return piix4_smba;
87e1960e
SH
295}
296
0b255e92
BP
297static int piix4_setup_aux(struct pci_dev *PIIX4_dev,
298 const struct pci_device_id *id,
299 unsigned short base_reg_addr)
2a2f7404
AA
300{
301 /* Set up auxiliary SMBus controllers found on some
302 * AMD chipsets e.g. SP5100 (SB700 derivative) */
303
304 unsigned short piix4_smba;
305
306 /* Read address of auxiliary SMBus controller */
307 pci_read_config_word(PIIX4_dev, base_reg_addr, &piix4_smba);
308 if ((piix4_smba & 1) == 0) {
309 dev_dbg(&PIIX4_dev->dev,
310 "Auxiliary SMBus controller not enabled\n");
311 return -ENODEV;
312 }
313
314 piix4_smba &= 0xfff0;
315 if (piix4_smba == 0) {
316 dev_dbg(&PIIX4_dev->dev,
317 "Auxiliary SMBus base address uninitialized\n");
318 return -ENODEV;
319 }
320
321 if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name))
322 return -ENODEV;
323
324 if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) {
325 dev_err(&PIIX4_dev->dev, "Auxiliary SMBus region 0x%x "
326 "already in use!\n", piix4_smba);
327 return -EBUSY;
328 }
329
330 dev_info(&PIIX4_dev->dev,
331 "Auxiliary SMBus Host Controller at 0x%x\n",
332 piix4_smba);
333
334 return piix4_smba;
335}
336
e154bf6f 337static int piix4_transaction(struct i2c_adapter *piix4_adapter)
1da177e4 338{
e154bf6f
AA
339 struct i2c_piix4_adapdata *adapdata = i2c_get_adapdata(piix4_adapter);
340 unsigned short piix4_smba = adapdata->smba;
1da177e4
LT
341 int temp;
342 int result = 0;
343 int timeout = 0;
344
e154bf6f 345 dev_dbg(&piix4_adapter->dev, "Transaction (pre): CNT=%02x, CMD=%02x, "
1da177e4
LT
346 "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
347 inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
348 inb_p(SMBHSTDAT1));
349
350 /* Make sure the SMBus host is ready to start transmitting */
351 if ((temp = inb_p(SMBHSTSTS)) != 0x00) {
e154bf6f 352 dev_dbg(&piix4_adapter->dev, "SMBus busy (%02x). "
541e6a02 353 "Resetting...\n", temp);
1da177e4
LT
354 outb_p(temp, SMBHSTSTS);
355 if ((temp = inb_p(SMBHSTSTS)) != 0x00) {
e154bf6f 356 dev_err(&piix4_adapter->dev, "Failed! (%02x)\n", temp);
97140342 357 return -EBUSY;
1da177e4 358 } else {
e154bf6f 359 dev_dbg(&piix4_adapter->dev, "Successful!\n");
1da177e4
LT
360 }
361 }
362
363 /* start the transaction by setting bit 6 */
364 outb_p(inb(SMBHSTCNT) | 0x040, SMBHSTCNT);
365
366 /* We will always wait for a fraction of a second! (See PIIX4 docs errata) */
b1c1759c
DM
367 if (srvrworks_csb5_delay) /* Extra delay for SERVERWORKS_CSB5 */
368 msleep(2);
369 else
370 msleep(1);
371
b6a31950 372 while ((++timeout < MAX_TIMEOUT) &&
b1c1759c 373 ((temp = inb_p(SMBHSTSTS)) & 0x01))
1da177e4 374 msleep(1);
1da177e4
LT
375
376 /* If the SMBus is still busy, we give up */
b6a31950 377 if (timeout == MAX_TIMEOUT) {
e154bf6f 378 dev_err(&piix4_adapter->dev, "SMBus Timeout!\n");
97140342 379 result = -ETIMEDOUT;
1da177e4
LT
380 }
381
382 if (temp & 0x10) {
97140342 383 result = -EIO;
e154bf6f 384 dev_err(&piix4_adapter->dev, "Error: Failed bus transaction\n");
1da177e4
LT
385 }
386
387 if (temp & 0x08) {
97140342 388 result = -EIO;
e154bf6f 389 dev_dbg(&piix4_adapter->dev, "Bus collision! SMBus may be "
1da177e4
LT
390 "locked until next hard reset. (sorry!)\n");
391 /* Clock stops and slave is stuck in mid-transmission */
392 }
393
394 if (temp & 0x04) {
97140342 395 result = -ENXIO;
e154bf6f 396 dev_dbg(&piix4_adapter->dev, "Error: no response!\n");
1da177e4
LT
397 }
398
399 if (inb_p(SMBHSTSTS) != 0x00)
400 outb_p(inb(SMBHSTSTS), SMBHSTSTS);
401
402 if ((temp = inb_p(SMBHSTSTS)) != 0x00) {
e154bf6f 403 dev_err(&piix4_adapter->dev, "Failed reset at end of "
1da177e4
LT
404 "transaction (%02x)\n", temp);
405 }
e154bf6f 406 dev_dbg(&piix4_adapter->dev, "Transaction (post): CNT=%02x, CMD=%02x, "
1da177e4
LT
407 "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
408 inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
409 inb_p(SMBHSTDAT1));
410 return result;
411}
412
97140342 413/* Return negative errno on error. */
1da177e4
LT
414static s32 piix4_access(struct i2c_adapter * adap, u16 addr,
415 unsigned short flags, char read_write,
416 u8 command, int size, union i2c_smbus_data * data)
417{
14a8086d
AA
418 struct i2c_piix4_adapdata *adapdata = i2c_get_adapdata(adap);
419 unsigned short piix4_smba = adapdata->smba;
1da177e4 420 int i, len;
97140342 421 int status;
1da177e4
LT
422
423 switch (size) {
1da177e4 424 case I2C_SMBUS_QUICK:
fa63cd56 425 outb_p((addr << 1) | read_write,
1da177e4
LT
426 SMBHSTADD);
427 size = PIIX4_QUICK;
428 break;
429 case I2C_SMBUS_BYTE:
fa63cd56 430 outb_p((addr << 1) | read_write,
1da177e4
LT
431 SMBHSTADD);
432 if (read_write == I2C_SMBUS_WRITE)
433 outb_p(command, SMBHSTCMD);
434 size = PIIX4_BYTE;
435 break;
436 case I2C_SMBUS_BYTE_DATA:
fa63cd56 437 outb_p((addr << 1) | read_write,
1da177e4
LT
438 SMBHSTADD);
439 outb_p(command, SMBHSTCMD);
440 if (read_write == I2C_SMBUS_WRITE)
441 outb_p(data->byte, SMBHSTDAT0);
442 size = PIIX4_BYTE_DATA;
443 break;
444 case I2C_SMBUS_WORD_DATA:
fa63cd56 445 outb_p((addr << 1) | read_write,
1da177e4
LT
446 SMBHSTADD);
447 outb_p(command, SMBHSTCMD);
448 if (read_write == I2C_SMBUS_WRITE) {
449 outb_p(data->word & 0xff, SMBHSTDAT0);
450 outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1);
451 }
452 size = PIIX4_WORD_DATA;
453 break;
454 case I2C_SMBUS_BLOCK_DATA:
fa63cd56 455 outb_p((addr << 1) | read_write,
1da177e4
LT
456 SMBHSTADD);
457 outb_p(command, SMBHSTCMD);
458 if (read_write == I2C_SMBUS_WRITE) {
459 len = data->block[0];
fa63cd56
JD
460 if (len == 0 || len > I2C_SMBUS_BLOCK_MAX)
461 return -EINVAL;
1da177e4
LT
462 outb_p(len, SMBHSTDAT0);
463 i = inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */
464 for (i = 1; i <= len; i++)
465 outb_p(data->block[i], SMBBLKDAT);
466 }
467 size = PIIX4_BLOCK_DATA;
468 break;
ac7fc4fb
JD
469 default:
470 dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
471 return -EOPNOTSUPP;
1da177e4
LT
472 }
473
474 outb_p((size & 0x1C) + (ENABLE_INT9 & 1), SMBHSTCNT);
475
e154bf6f 476 status = piix4_transaction(adap);
97140342
DB
477 if (status)
478 return status;
1da177e4
LT
479
480 if ((read_write == I2C_SMBUS_WRITE) || (size == PIIX4_QUICK))
481 return 0;
482
483
484 switch (size) {
3578a075 485 case PIIX4_BYTE:
1da177e4
LT
486 case PIIX4_BYTE_DATA:
487 data->byte = inb_p(SMBHSTDAT0);
488 break;
489 case PIIX4_WORD_DATA:
490 data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8);
491 break;
492 case PIIX4_BLOCK_DATA:
493 data->block[0] = inb_p(SMBHSTDAT0);
fa63cd56
JD
494 if (data->block[0] == 0 || data->block[0] > I2C_SMBUS_BLOCK_MAX)
495 return -EPROTO;
1da177e4
LT
496 i = inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */
497 for (i = 1; i <= data->block[0]; i++)
498 data->block[i] = inb_p(SMBBLKDAT);
499 break;
500 }
501 return 0;
502}
503
504static u32 piix4_func(struct i2c_adapter *adapter)
505{
506 return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
507 I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
508 I2C_FUNC_SMBUS_BLOCK_DATA;
509}
510
8f9082c5 511static const struct i2c_algorithm smbus_algorithm = {
1da177e4
LT
512 .smbus_xfer = piix4_access,
513 .functionality = piix4_func,
514};
515
3527bd50 516static DEFINE_PCI_DEVICE_TABLE(piix4_ids) = {
9b7389c0
JD
517 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3) },
518 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3) },
519 { PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_3) },
520 { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP200_SMBUS) },
521 { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_SMBUS) },
522 { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS) },
523 { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS) },
3806e94b 524 { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) },
b996ac90 525 { PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x790b) },
9b7389c0
JD
526 { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
527 PCI_DEVICE_ID_SERVERWORKS_OSB4) },
528 { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
529 PCI_DEVICE_ID_SERVERWORKS_CSB5) },
530 { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
531 PCI_DEVICE_ID_SERVERWORKS_CSB6) },
532 { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
533 PCI_DEVICE_ID_SERVERWORKS_HT1000SB) },
506a8b6c
FL
534 { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
535 PCI_DEVICE_ID_SERVERWORKS_HT1100LD) },
1da177e4
LT
536 { 0, }
537};
538
539MODULE_DEVICE_TABLE (pci, piix4_ids);
540
e154bf6f 541static struct i2c_adapter *piix4_main_adapter;
2a2f7404 542static struct i2c_adapter *piix4_aux_adapter;
e154bf6f 543
0b255e92
BP
544static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba,
545 struct i2c_adapter **padap)
e154bf6f
AA
546{
547 struct i2c_adapter *adap;
548 struct i2c_piix4_adapdata *adapdata;
549 int retval;
550
551 adap = kzalloc(sizeof(*adap), GFP_KERNEL);
552 if (adap == NULL) {
553 release_region(smba, SMBIOSIZE);
554 return -ENOMEM;
555 }
556
557 adap->owner = THIS_MODULE;
558 adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
559 adap->algo = &smbus_algorithm;
560
561 adapdata = kzalloc(sizeof(*adapdata), GFP_KERNEL);
562 if (adapdata == NULL) {
563 kfree(adap);
564 release_region(smba, SMBIOSIZE);
565 return -ENOMEM;
566 }
567
568 adapdata->smba = smba;
569
570 /* set up the sysfs linkage to our parent device */
571 adap->dev.parent = &dev->dev;
572
573 snprintf(adap->name, sizeof(adap->name),
574 "SMBus PIIX4 adapter at %04x", smba);
575
576 i2c_set_adapdata(adap, adapdata);
577
578 retval = i2c_add_adapter(adap);
579 if (retval) {
580 dev_err(&dev->dev, "Couldn't register adapter!\n");
581 kfree(adapdata);
582 kfree(adap);
583 release_region(smba, SMBIOSIZE);
584 return retval;
585 }
586
587 *padap = adap;
588 return 0;
589}
590
0b255e92 591static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id)
1da177e4
LT
592{
593 int retval;
594
76b3e28f
CC
595 if ((dev->vendor == PCI_VENDOR_ID_ATI &&
596 dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS &&
597 dev->revision >= 0x40) ||
598 dev->vendor == PCI_VENDOR_ID_AMD)
87e1960e
SH
599 /* base address location etc changed in SB800 */
600 retval = piix4_setup_sb800(dev, id);
601 else
602 retval = piix4_setup(dev, id);
603
2a2f7404 604 /* If no main SMBus found, give up */
14a8086d 605 if (retval < 0)
1da177e4
LT
606 return retval;
607
2a2f7404
AA
608 /* Try to register main SMBus adapter, give up if we can't */
609 retval = piix4_add_adapter(dev, retval, &piix4_main_adapter);
610 if (retval < 0)
611 return retval;
612
613 /* Check for auxiliary SMBus on some AMD chipsets */
614 if (dev->vendor == PCI_VENDOR_ID_ATI &&
615 dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS &&
616 dev->revision < 0x40) {
617 retval = piix4_setup_aux(dev, id, 0x58);
618 if (retval > 0) {
619 /* Try to add the aux adapter if it exists,
620 * piix4_add_adapter will clean up if this fails */
621 piix4_add_adapter(dev, retval, &piix4_aux_adapter);
622 }
623 }
624
625 return 0;
1da177e4
LT
626}
627
0b255e92 628static void piix4_adap_remove(struct i2c_adapter *adap)
1da177e4 629{
14a8086d
AA
630 struct i2c_piix4_adapdata *adapdata = i2c_get_adapdata(adap);
631
632 if (adapdata->smba) {
633 i2c_del_adapter(adap);
634 release_region(adapdata->smba, SMBIOSIZE);
e154bf6f
AA
635 kfree(adapdata);
636 kfree(adap);
1da177e4
LT
637 }
638}
639
0b255e92 640static void piix4_remove(struct pci_dev *dev)
14a8086d 641{
e154bf6f
AA
642 if (piix4_main_adapter) {
643 piix4_adap_remove(piix4_main_adapter);
644 piix4_main_adapter = NULL;
645 }
2a2f7404
AA
646
647 if (piix4_aux_adapter) {
648 piix4_adap_remove(piix4_aux_adapter);
649 piix4_aux_adapter = NULL;
650 }
14a8086d
AA
651}
652
1da177e4
LT
653static struct pci_driver piix4_driver = {
654 .name = "piix4_smbus",
655 .id_table = piix4_ids,
656 .probe = piix4_probe,
0b255e92 657 .remove = piix4_remove,
1da177e4
LT
658};
659
56f21788 660module_pci_driver(piix4_driver);
1da177e4
LT
661
662MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and "
663 "Philip Edelbrock <phil@netroedge.com>");
664MODULE_DESCRIPTION("PIIX4 SMBus driver");
665MODULE_LICENSE("GPL");
This page took 0.710382 seconds and 5 git commands to generate.