Commit | Line | Data |
---|---|---|
594c16d8 BZ |
1 | /* |
2 | * ATAPI support. | |
3 | */ | |
4 | ||
5 | #include <linux/kernel.h> | |
6 | #include <linux/delay.h> | |
7 | #include <linux/ide.h> | |
646c0cb6 BZ |
8 | #include <scsi/scsi.h> |
9 | ||
10 | #ifdef DEBUG | |
11 | #define debug_log(fmt, args...) \ | |
12 | printk(KERN_INFO "ide: " fmt, ## args) | |
13 | #else | |
14 | #define debug_log(fmt, args...) do {} while (0) | |
15 | #endif | |
16 | ||
51509eec BZ |
17 | /* |
18 | * Check whether we can support a device, | |
19 | * based on the ATAPI IDENTIFY command results. | |
20 | */ | |
21 | int ide_check_atapi_device(ide_drive_t *drive, const char *s) | |
22 | { | |
23 | u16 *id = drive->id; | |
24 | u8 gcw[2], protocol, device_type, removable, drq_type, packet_size; | |
25 | ||
26 | *((u16 *)&gcw) = id[ATA_ID_CONFIG]; | |
27 | ||
28 | protocol = (gcw[1] & 0xC0) >> 6; | |
29 | device_type = gcw[1] & 0x1F; | |
30 | removable = (gcw[0] & 0x80) >> 7; | |
31 | drq_type = (gcw[0] & 0x60) >> 5; | |
32 | packet_size = gcw[0] & 0x03; | |
33 | ||
34 | #ifdef CONFIG_PPC | |
35 | /* kludge for Apple PowerBook internal zip */ | |
36 | if (drive->media == ide_floppy && device_type == 5 && | |
37 | !strstr((char *)&id[ATA_ID_PROD], "CD-ROM") && | |
38 | strstr((char *)&id[ATA_ID_PROD], "ZIP")) | |
39 | device_type = 0; | |
40 | #endif | |
41 | ||
42 | if (protocol != 2) | |
43 | printk(KERN_ERR "%s: %s: protocol (0x%02x) is not ATAPI\n", | |
44 | s, drive->name, protocol); | |
45 | else if ((drive->media == ide_floppy && device_type != 0) || | |
46 | (drive->media == ide_tape && device_type != 1)) | |
47 | printk(KERN_ERR "%s: %s: invalid device type (0x%02x)\n", | |
48 | s, drive->name, device_type); | |
49 | else if (removable == 0) | |
50 | printk(KERN_ERR "%s: %s: the removable flag is not set\n", | |
51 | s, drive->name); | |
52 | else if (drive->media == ide_floppy && drq_type == 3) | |
53 | printk(KERN_ERR "%s: %s: sorry, DRQ type (0x%02x) not " | |
54 | "supported\n", s, drive->name, drq_type); | |
55 | else if (packet_size != 0) | |
56 | printk(KERN_ERR "%s: %s: packet size (0x%02x) is not 12 " | |
57 | "bytes\n", s, drive->name, packet_size); | |
58 | else | |
59 | return 1; | |
60 | return 0; | |
61 | } | |
62 | EXPORT_SYMBOL_GPL(ide_check_atapi_device); | |
63 | ||
acaa0f5f BZ |
64 | /* PIO data transfer routine using the scatter gather table. */ |
65 | int ide_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, | |
66 | unsigned int bcount, int write) | |
67 | { | |
68 | ide_hwif_t *hwif = drive->hwif; | |
69 | const struct ide_tp_ops *tp_ops = hwif->tp_ops; | |
70 | xfer_func_t *xf = write ? tp_ops->output_data : tp_ops->input_data; | |
71 | struct scatterlist *sg = pc->sg; | |
72 | char *buf; | |
73 | int count, done = 0; | |
74 | ||
75 | while (bcount) { | |
76 | count = min(sg->length - pc->b_count, bcount); | |
77 | ||
78 | if (PageHighMem(sg_page(sg))) { | |
79 | unsigned long flags; | |
80 | ||
81 | local_irq_save(flags); | |
82 | buf = kmap_atomic(sg_page(sg), KM_IRQ0) + sg->offset; | |
83 | xf(drive, NULL, buf + pc->b_count, count); | |
84 | kunmap_atomic(buf - sg->offset, KM_IRQ0); | |
85 | local_irq_restore(flags); | |
86 | } else { | |
87 | buf = sg_virt(sg); | |
88 | xf(drive, NULL, buf + pc->b_count, count); | |
89 | } | |
90 | ||
91 | bcount -= count; | |
92 | pc->b_count += count; | |
93 | done += count; | |
94 | ||
95 | if (pc->b_count == sg->length) { | |
96 | if (!--pc->sg_cnt) | |
97 | break; | |
98 | pc->sg = sg = sg_next(sg); | |
99 | pc->b_count = 0; | |
100 | } | |
101 | } | |
102 | ||
103 | if (bcount) { | |
104 | printk(KERN_ERR "%s: %d leftover bytes, %s\n", drive->name, | |
105 | bcount, write ? "padding with zeros" | |
106 | : "discarding data"); | |
107 | ide_pad_transfer(drive, write, bcount); | |
108 | } | |
109 | ||
110 | return done; | |
111 | } | |
112 | EXPORT_SYMBOL_GPL(ide_io_buffers); | |
113 | ||
7bf7420a BZ |
114 | void ide_init_pc(struct ide_atapi_pc *pc) |
115 | { | |
116 | memset(pc, 0, sizeof(*pc)); | |
117 | pc->buf = pc->pc_buf; | |
118 | pc->buf_size = IDE_PC_BUFFER_SIZE; | |
119 | } | |
120 | EXPORT_SYMBOL_GPL(ide_init_pc); | |
121 | ||
646c0cb6 BZ |
122 | /* TODO: unify the code thus making some arguments go away */ |
123 | ide_startstop_t ide_pc_intr(ide_drive_t *drive, struct ide_atapi_pc *pc, | |
124 | ide_handler_t *handler, unsigned int timeout, ide_expiry_t *expiry, | |
125 | void (*update_buffers)(ide_drive_t *, struct ide_atapi_pc *), | |
126 | void (*retry_pc)(ide_drive_t *), void (*dsc_handle)(ide_drive_t *), | |
acaa0f5f | 127 | int (*io_buffers)(ide_drive_t *, struct ide_atapi_pc *, unsigned, int)) |
646c0cb6 BZ |
128 | { |
129 | ide_hwif_t *hwif = drive->hwif; | |
8fccf899 | 130 | struct request *rq = hwif->hwgroup->rq; |
374e042c | 131 | const struct ide_tp_ops *tp_ops = hwif->tp_ops; |
646c0cb6 BZ |
132 | xfer_func_t *xferfunc; |
133 | unsigned int temp; | |
134 | u16 bcount; | |
135 | u8 stat, ireason, scsi = drive->scsi; | |
136 | ||
137 | debug_log("Enter %s - interrupt handler\n", __func__); | |
138 | ||
139 | if (pc->flags & PC_FLAG_TIMEDOUT) { | |
db9d2869 | 140 | drive->pc_callback(drive); |
646c0cb6 BZ |
141 | return ide_stopped; |
142 | } | |
143 | ||
144 | /* Clear the interrupt */ | |
374e042c | 145 | stat = tp_ops->read_status(hwif); |
646c0cb6 BZ |
146 | |
147 | if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { | |
148 | if (hwif->dma_ops->dma_end(drive) || | |
3a7d2484 | 149 | (drive->media == ide_tape && !scsi && (stat & ATA_ERR))) { |
646c0cb6 BZ |
150 | if (drive->media == ide_floppy && !scsi) |
151 | printk(KERN_ERR "%s: DMA %s error\n", | |
152 | drive->name, rq_data_dir(pc->rq) | |
153 | ? "write" : "read"); | |
154 | pc->flags |= PC_FLAG_DMA_ERROR; | |
155 | } else { | |
156 | pc->xferred = pc->req_xfer; | |
157 | if (update_buffers) | |
158 | update_buffers(drive, pc); | |
159 | } | |
160 | debug_log("%s: DMA finished\n", drive->name); | |
161 | } | |
162 | ||
163 | /* No more interrupts */ | |
3a7d2484 | 164 | if ((stat & ATA_DRQ) == 0) { |
646c0cb6 BZ |
165 | debug_log("Packet command completed, %d bytes transferred\n", |
166 | pc->xferred); | |
167 | ||
168 | pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; | |
169 | ||
170 | local_irq_enable_in_hardirq(); | |
171 | ||
172 | if (drive->media == ide_tape && !scsi && | |
3a7d2484 BZ |
173 | (stat & ATA_ERR) && rq->cmd[0] == REQUEST_SENSE) |
174 | stat &= ~ATA_ERR; | |
8fccf899 | 175 | |
3a7d2484 | 176 | if ((stat & ATA_ERR) || (pc->flags & PC_FLAG_DMA_ERROR)) { |
646c0cb6 BZ |
177 | /* Error detected */ |
178 | debug_log("%s: I/O error\n", drive->name); | |
179 | ||
180 | if (drive->media != ide_tape || scsi) { | |
181 | pc->rq->errors++; | |
182 | if (scsi) | |
183 | goto cmd_finished; | |
184 | } | |
185 | ||
8fccf899 | 186 | if (rq->cmd[0] == REQUEST_SENSE) { |
646c0cb6 BZ |
187 | printk(KERN_ERR "%s: I/O error in request sense" |
188 | " command\n", drive->name); | |
189 | return ide_do_reset(drive); | |
190 | } | |
191 | ||
8fccf899 | 192 | debug_log("[cmd %x]: check condition\n", rq->cmd[0]); |
646c0cb6 BZ |
193 | |
194 | /* Retry operation */ | |
195 | retry_pc(drive); | |
8fccf899 | 196 | |
646c0cb6 BZ |
197 | /* queued, but not started */ |
198 | return ide_stopped; | |
199 | } | |
200 | cmd_finished: | |
201 | pc->error = 0; | |
202 | if ((pc->flags & PC_FLAG_WAIT_FOR_DSC) && | |
3a7d2484 | 203 | (stat & ATA_DSC) == 0) { |
646c0cb6 BZ |
204 | dsc_handle(drive); |
205 | return ide_stopped; | |
206 | } | |
8fccf899 | 207 | |
646c0cb6 | 208 | /* Command finished - Call the callback function */ |
db9d2869 | 209 | drive->pc_callback(drive); |
8fccf899 | 210 | |
646c0cb6 BZ |
211 | return ide_stopped; |
212 | } | |
213 | ||
214 | if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { | |
215 | pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; | |
216 | printk(KERN_ERR "%s: The device wants to issue more interrupts " | |
217 | "in DMA mode\n", drive->name); | |
218 | ide_dma_off(drive); | |
219 | return ide_do_reset(drive); | |
220 | } | |
646c0cb6 | 221 | |
1823649b BZ |
222 | /* Get the number of bytes to transfer on this interrupt. */ |
223 | ide_read_bcount_and_ireason(drive, &bcount, &ireason); | |
646c0cb6 | 224 | |
3a7d2484 | 225 | if (ireason & ATAPI_COD) { |
646c0cb6 BZ |
226 | printk(KERN_ERR "%s: CoD != 0 in %s\n", drive->name, __func__); |
227 | return ide_do_reset(drive); | |
228 | } | |
8fccf899 | 229 | |
3a7d2484 BZ |
230 | if (((ireason & ATAPI_IO) == ATAPI_IO) == |
231 | !!(pc->flags & PC_FLAG_WRITING)) { | |
646c0cb6 BZ |
232 | /* Hopefully, we will never get here */ |
233 | printk(KERN_ERR "%s: We wanted to %s, but the device wants us " | |
234 | "to %s!\n", drive->name, | |
3a7d2484 BZ |
235 | (ireason & ATAPI_IO) ? "Write" : "Read", |
236 | (ireason & ATAPI_IO) ? "Read" : "Write"); | |
646c0cb6 BZ |
237 | return ide_do_reset(drive); |
238 | } | |
8fccf899 | 239 | |
646c0cb6 BZ |
240 | if (!(pc->flags & PC_FLAG_WRITING)) { |
241 | /* Reading - Check that we have enough space */ | |
242 | temp = pc->xferred + bcount; | |
243 | if (temp > pc->req_xfer) { | |
244 | if (temp > pc->buf_size) { | |
245 | printk(KERN_ERR "%s: The device wants to send " | |
246 | "us more data than expected - " | |
247 | "discarding data\n", | |
248 | drive->name); | |
249 | if (scsi) | |
250 | temp = pc->buf_size - pc->xferred; | |
251 | else | |
252 | temp = 0; | |
253 | if (temp) { | |
254 | if (pc->sg) | |
255 | io_buffers(drive, pc, temp, 0); | |
256 | else | |
374e042c | 257 | tp_ops->input_data(drive, NULL, |
646c0cb6 BZ |
258 | pc->cur_pos, temp); |
259 | printk(KERN_ERR "%s: transferred %d of " | |
260 | "%d bytes\n", | |
261 | drive->name, | |
262 | temp, bcount); | |
263 | } | |
264 | pc->xferred += temp; | |
265 | pc->cur_pos += temp; | |
266 | ide_pad_transfer(drive, 0, bcount - temp); | |
267 | ide_set_handler(drive, handler, timeout, | |
268 | expiry); | |
269 | return ide_started; | |
270 | } | |
271 | debug_log("The device wants to send us more data than " | |
272 | "expected - allowing transfer\n"); | |
273 | } | |
374e042c | 274 | xferfunc = tp_ops->input_data; |
646c0cb6 | 275 | } else |
374e042c | 276 | xferfunc = tp_ops->output_data; |
646c0cb6 BZ |
277 | |
278 | if ((drive->media == ide_floppy && !scsi && !pc->buf) || | |
279 | (drive->media == ide_tape && !scsi && pc->bh) || | |
acaa0f5f BZ |
280 | (scsi && pc->sg)) { |
281 | int done = io_buffers(drive, pc, bcount, | |
282 | !!(pc->flags & PC_FLAG_WRITING)); | |
283 | ||
284 | /* FIXME: don't do partial completions */ | |
285 | if (drive->media == ide_floppy && !scsi) | |
286 | ide_end_request(drive, 1, done >> 9); | |
287 | } else | |
646c0cb6 BZ |
288 | xferfunc(drive, NULL, pc->cur_pos, bcount); |
289 | ||
290 | /* Update the current position */ | |
291 | pc->xferred += bcount; | |
292 | pc->cur_pos += bcount; | |
293 | ||
294 | debug_log("[cmd %x] transferred %d bytes on that intr.\n", | |
8fccf899 | 295 | rq->cmd[0], bcount); |
646c0cb6 BZ |
296 | |
297 | /* And set the interrupt handler again */ | |
298 | ide_set_handler(drive, handler, timeout, expiry); | |
299 | return ide_started; | |
300 | } | |
301 | EXPORT_SYMBOL_GPL(ide_pc_intr); | |
594c16d8 | 302 | |
88a72109 BZ |
303 | static u8 ide_read_ireason(ide_drive_t *drive) |
304 | { | |
305 | ide_task_t task; | |
306 | ||
307 | memset(&task, 0, sizeof(task)); | |
308 | task.tf_flags = IDE_TFLAG_IN_NSECT; | |
309 | ||
374e042c | 310 | drive->hwif->tp_ops->tf_read(drive, &task); |
88a72109 BZ |
311 | |
312 | return task.tf.nsect & 3; | |
313 | } | |
314 | ||
594c16d8 BZ |
315 | static u8 ide_wait_ireason(ide_drive_t *drive, u8 ireason) |
316 | { | |
594c16d8 BZ |
317 | int retries = 100; |
318 | ||
3a7d2484 BZ |
319 | while (retries-- && ((ireason & ATAPI_COD) == 0 || |
320 | (ireason & ATAPI_IO))) { | |
594c16d8 BZ |
321 | printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing " |
322 | "a packet command, retrying\n", drive->name); | |
323 | udelay(100); | |
88a72109 | 324 | ireason = ide_read_ireason(drive); |
594c16d8 BZ |
325 | if (retries == 0) { |
326 | printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing " | |
327 | "a packet command, ignoring\n", | |
328 | drive->name); | |
3a7d2484 BZ |
329 | ireason |= ATAPI_COD; |
330 | ireason &= ~ATAPI_IO; | |
594c16d8 BZ |
331 | } |
332 | } | |
333 | ||
334 | return ireason; | |
335 | } | |
336 | ||
337 | ide_startstop_t ide_transfer_pc(ide_drive_t *drive, struct ide_atapi_pc *pc, | |
338 | ide_handler_t *handler, unsigned int timeout, | |
339 | ide_expiry_t *expiry) | |
340 | { | |
341 | ide_hwif_t *hwif = drive->hwif; | |
8fccf899 | 342 | struct request *rq = hwif->hwgroup->rq; |
594c16d8 BZ |
343 | ide_startstop_t startstop; |
344 | u8 ireason; | |
345 | ||
3a7d2484 | 346 | if (ide_wait_stat(&startstop, drive, ATA_DRQ, ATA_BUSY, WAIT_READY)) { |
594c16d8 BZ |
347 | printk(KERN_ERR "%s: Strange, packet command initiated yet " |
348 | "DRQ isn't asserted\n", drive->name); | |
349 | return startstop; | |
350 | } | |
351 | ||
88a72109 | 352 | ireason = ide_read_ireason(drive); |
594c16d8 BZ |
353 | if (drive->media == ide_tape && !drive->scsi) |
354 | ireason = ide_wait_ireason(drive, ireason); | |
355 | ||
3a7d2484 | 356 | if ((ireason & ATAPI_COD) == 0 || (ireason & ATAPI_IO)) { |
594c16d8 BZ |
357 | printk(KERN_ERR "%s: (IO,CoD) != (0,1) while issuing " |
358 | "a packet command\n", drive->name); | |
359 | return ide_do_reset(drive); | |
360 | } | |
361 | ||
362 | /* Set the interrupt routine */ | |
363 | ide_set_handler(drive, handler, timeout, expiry); | |
364 | ||
365 | /* Begin DMA, if necessary */ | |
366 | if (pc->flags & PC_FLAG_DMA_OK) { | |
367 | pc->flags |= PC_FLAG_DMA_IN_PROGRESS; | |
368 | hwif->dma_ops->dma_start(drive); | |
369 | } | |
370 | ||
371 | /* Send the actual packet */ | |
ea68d270 | 372 | if ((drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) == 0) |
8fccf899 | 373 | hwif->tp_ops->output_data(drive, NULL, rq->cmd, 12); |
594c16d8 BZ |
374 | |
375 | return ide_started; | |
376 | } | |
377 | EXPORT_SYMBOL_GPL(ide_transfer_pc); | |
6bf1641c BZ |
378 | |
379 | ide_startstop_t ide_issue_pc(ide_drive_t *drive, struct ide_atapi_pc *pc, | |
380 | ide_handler_t *handler, unsigned int timeout, | |
381 | ide_expiry_t *expiry) | |
382 | { | |
383 | ide_hwif_t *hwif = drive->hwif; | |
384 | u16 bcount; | |
385 | u8 dma = 0; | |
386 | ||
387 | /* We haven't transferred any data yet */ | |
388 | pc->xferred = 0; | |
389 | pc->cur_pos = pc->buf; | |
390 | ||
391 | /* Request to transfer the entire buffer at once */ | |
392 | if (drive->media == ide_tape && !drive->scsi) | |
393 | bcount = pc->req_xfer; | |
394 | else | |
395 | bcount = min(pc->req_xfer, 63 * 1024); | |
396 | ||
397 | if (pc->flags & PC_FLAG_DMA_ERROR) { | |
398 | pc->flags &= ~PC_FLAG_DMA_ERROR; | |
399 | ide_dma_off(drive); | |
400 | } | |
401 | ||
402 | if ((pc->flags & PC_FLAG_DMA_OK) && drive->using_dma) { | |
403 | if (drive->scsi) | |
404 | hwif->sg_mapped = 1; | |
405 | dma = !hwif->dma_ops->dma_setup(drive); | |
406 | if (drive->scsi) | |
407 | hwif->sg_mapped = 0; | |
408 | } | |
409 | ||
410 | if (!dma) | |
411 | pc->flags &= ~PC_FLAG_DMA_OK; | |
412 | ||
413 | ide_pktcmd_tf_load(drive, drive->scsi ? 0 : IDE_TFLAG_OUT_DEVICE, | |
414 | bcount, dma); | |
415 | ||
416 | /* Issue the packet command */ | |
ac77ef8b | 417 | if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) { |
aaaade3f | 418 | ide_execute_command(drive, ATA_CMD_PACKET, handler, |
6bf1641c BZ |
419 | timeout, NULL); |
420 | return ide_started; | |
421 | } else { | |
422 | ide_execute_pkt_cmd(drive); | |
423 | return (*handler)(drive); | |
424 | } | |
425 | } | |
426 | EXPORT_SYMBOL_GPL(ide_issue_pc); |