Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * linux/drivers/ide/ide-cd.c | |
3 | * | |
4 | * Copyright (C) 1994, 1995, 1996 scott snyder <snyder@fnald0.fnal.gov> | |
5 | * Copyright (C) 1996-1998 Erik Andersen <andersee@debian.org> | |
6 | * Copyright (C) 1998-2000 Jens Axboe <axboe@suse.de> | |
7 | * | |
8 | * May be copied or modified under the terms of the GNU General Public | |
9 | * License. See linux/COPYING for more information. | |
10 | * | |
11 | * ATAPI CD-ROM driver. To be used with ide.c. | |
12 | * See Documentation/cdrom/ide-cd for usage information. | |
13 | * | |
14 | * Suggestions are welcome. Patches that work are more welcome though. ;-) | |
15 | * For those wishing to work on this driver, please be sure you download | |
16 | * and comply with the latest Mt. Fuji (SFF8090 version 4) and ATAPI | |
17 | * (SFF-8020i rev 2.6) standards. These documents can be obtained by | |
18 | * anonymous ftp from: | |
19 | * ftp://fission.dt.wdc.com/pub/standards/SFF_atapi/spec/SFF8020-r2.6/PS/8020r26.ps | |
20 | * ftp://ftp.avc-pioneer.com/Mtfuji4/Spec/Fuji4r10.pdf | |
21 | * | |
22 | * Drives that deviate from these standards will be accommodated as much | |
23 | * as possible via compile time or command-line options. Since I only have | |
24 | * a few drives, you generally need to send me patches... | |
25 | * | |
26 | * ---------------------------------- | |
27 | * TO DO LIST: | |
28 | * -Make it so that Pioneer CD DR-A24X and friends don't get screwed up on | |
29 | * boot | |
30 | * | |
31 | * ---------------------------------- | |
32 | * 1.00 Oct 31, 1994 -- Initial version. | |
33 | * 1.01 Nov 2, 1994 -- Fixed problem with starting request in | |
34 | * cdrom_check_status. | |
35 | * 1.03 Nov 25, 1994 -- leaving unmask_intr[] as a user-setting (as for disks) | |
36 | * (from mlord) -- minor changes to cdrom_setup() | |
37 | * -- renamed ide_dev_s to ide_drive_t, enable irq on command | |
38 | * 2.00 Nov 27, 1994 -- Generalize packet command interface; | |
39 | * add audio ioctls. | |
40 | * 2.01 Dec 3, 1994 -- Rework packet command interface to handle devices | |
41 | * which send an interrupt when ready for a command. | |
42 | * 2.02 Dec 11, 1994 -- Cache the TOC in the driver. | |
43 | * Don't use SCMD_PLAYAUDIO_TI; it's not included | |
44 | * in the current version of ATAPI. | |
45 | * Try to use LBA instead of track or MSF addressing | |
46 | * when possible. | |
47 | * Don't wait for READY_STAT. | |
48 | * 2.03 Jan 10, 1995 -- Rewrite block read routines to handle block sizes | |
49 | * other than 2k and to move multiple sectors in a | |
50 | * single transaction. | |
51 | * 2.04 Apr 21, 1995 -- Add work-around for Creative Labs CD220E drives. | |
52 | * Thanks to Nick Saw <cwsaw@pts7.pts.mot.com> for | |
53 | * help in figuring this out. Ditto for Acer and | |
54 | * Aztech drives, which seem to have the same problem. | |
55 | * 2.04b May 30, 1995 -- Fix to match changes in ide.c version 3.16 -ml | |
56 | * 2.05 Jun 8, 1995 -- Don't attempt to retry after an illegal request | |
57 | * or data protect error. | |
58 | * Use HWIF and DEV_HWIF macros as in ide.c. | |
59 | * Always try to do a request_sense after | |
60 | * a failed command. | |
61 | * Include an option to give textual descriptions | |
62 | * of ATAPI errors. | |
63 | * Fix a bug in handling the sector cache which | |
64 | * showed up if the drive returned data in 512 byte | |
65 | * blocks (like Pioneer drives). Thanks to | |
66 | * Richard Hirst <srh@gpt.co.uk> for diagnosing this. | |
67 | * Properly supply the page number field in the | |
68 | * MODE_SELECT command. | |
69 | * PLAYAUDIO12 is broken on the Aztech; work around it. | |
70 | * 2.05x Aug 11, 1995 -- lots of data structure renaming/restructuring in ide.c | |
71 | * (my apologies to Scott, but now ide-cd.c is independent) | |
72 | * 3.00 Aug 22, 1995 -- Implement CDROMMULTISESSION ioctl. | |
73 | * Implement CDROMREADAUDIO ioctl (UNTESTED). | |
74 | * Use input_ide_data() and output_ide_data(). | |
75 | * Add door locking. | |
76 | * Fix usage count leak in cdrom_open, which happened | |
77 | * when a read-write mount was attempted. | |
78 | * Try to load the disk on open. | |
79 | * Implement CDROMEJECT_SW ioctl (off by default). | |
80 | * Read total cdrom capacity during open. | |
81 | * Rearrange logic in cdrom_decode_status. Issue | |
82 | * request sense commands for failed packet commands | |
83 | * from here instead of from cdrom_queue_packet_command. | |
84 | * Fix a race condition in retrieving error information. | |
85 | * Suppress printing normal unit attention errors and | |
86 | * some drive not ready errors. | |
87 | * Implement CDROMVOLREAD ioctl. | |
88 | * Implement CDROMREADMODE1/2 ioctls. | |
89 | * Fix race condition in setting up interrupt handlers | |
90 | * when the `serialize' option is used. | |
91 | * 3.01 Sep 2, 1995 -- Fix ordering of reenabling interrupts in | |
92 | * cdrom_queue_request. | |
93 | * Another try at using ide_[input,output]_data. | |
94 | * 3.02 Sep 16, 1995 -- Stick total disk capacity in partition table as well. | |
95 | * Make VERBOSE_IDE_CD_ERRORS dump failed command again. | |
96 | * Dump out more information for ILLEGAL REQUEST errs. | |
97 | * Fix handling of errors occurring before the | |
98 | * packet command is transferred. | |
99 | * Fix transfers with odd bytelengths. | |
100 | * 3.03 Oct 27, 1995 -- Some Creative drives have an id of just `CD'. | |
101 | * `DCI-2S10' drives are broken too. | |
102 | * 3.04 Nov 20, 1995 -- So are Vertos drives. | |
103 | * 3.05 Dec 1, 1995 -- Changes to go with overhaul of ide.c and ide-tape.c | |
104 | * 3.06 Dec 16, 1995 -- Add support needed for partitions. | |
105 | * More workarounds for Vertos bugs (based on patches | |
106 | * from Holger Dietze <dietze@aix520.informatik.uni-leipzig.de>). | |
107 | * Try to eliminate byteorder assumptions. | |
108 | * Use atapi_cdrom_subchnl struct definition. | |
109 | * Add STANDARD_ATAPI compilation option. | |
110 | * 3.07 Jan 29, 1996 -- More twiddling for broken drives: Sony 55D, | |
111 | * Vertos 300. | |
112 | * Add NO_DOOR_LOCKING configuration option. | |
113 | * Handle drive_cmd requests w/NULL args (for hdparm -t). | |
114 | * Work around sporadic Sony55e audio play problem. | |
115 | * 3.07a Feb 11, 1996 -- check drive->id for NULL before dereferencing, to fix | |
116 | * problem with "hde=cdrom" with no drive present. -ml | |
117 | * 3.08 Mar 6, 1996 -- More Vertos workarounds. | |
118 | * 3.09 Apr 5, 1996 -- Add CDROMCLOSETRAY ioctl. | |
119 | * Switch to using MSF addressing for audio commands. | |
120 | * Reformat to match kernel tabbing style. | |
121 | * Add CDROM_GET_UPC ioctl. | |
122 | * 3.10 Apr 10, 1996 -- Fix compilation error with STANDARD_ATAPI. | |
123 | * 3.11 Apr 29, 1996 -- Patch from Heiko Eissfeldt <heiko@colossus.escape.de> | |
124 | * to remove redundant verify_area calls. | |
125 | * 3.12 May 7, 1996 -- Rudimentary changer support. Based on patches | |
126 | * from Gerhard Zuber <zuber@berlin.snafu.de>. | |
127 | * Let open succeed even if there's no loaded disc. | |
128 | * 3.13 May 19, 1996 -- Fixes for changer code. | |
129 | * 3.14 May 29, 1996 -- Add work-around for Vertos 600. | |
130 | * (From Hennus Bergman <hennus@sky.ow.nl>.) | |
131 | * 3.15 July 2, 1996 -- Added support for Sanyo 3 CD changers | |
132 | * from Ben Galliart <bgallia@luc.edu> with | |
133 | * special help from Jeff Lightfoot | |
134 | * <jeffml@pobox.com> | |
135 | * 3.15a July 9, 1996 -- Improved Sanyo 3 CD changer identification | |
136 | * 3.16 Jul 28, 1996 -- Fix from Gadi to reduce kernel stack usage for ioctl. | |
137 | * 3.17 Sep 17, 1996 -- Tweak audio reads for some drives. | |
138 | * Start changing CDROMLOADFROMSLOT to CDROM_SELECT_DISC. | |
139 | * 3.18 Oct 31, 1996 -- Added module and DMA support. | |
140 | * | |
141 | * | |
142 | * 4.00 Nov 5, 1996 -- New ide-cd maintainer, | |
143 | * Erik B. Andersen <andersee@debian.org> | |
144 | * -- Newer Creative drives don't always set the error | |
145 | * register correctly. Make sure we see media changes | |
146 | * regardless. | |
147 | * -- Integrate with generic cdrom driver. | |
148 | * -- CDROMGETSPINDOWN and CDROMSETSPINDOWN ioctls, based on | |
149 | * a patch from Ciro Cattuto <>. | |
150 | * -- Call set_device_ro. | |
151 | * -- Implement CDROMMECHANISMSTATUS and CDROMSLOTTABLE | |
152 | * ioctls, based on patch by Erik Andersen | |
153 | * -- Add some probes of drive capability during setup. | |
154 | * | |
155 | * 4.01 Nov 11, 1996 -- Split into ide-cd.c and ide-cd.h | |
156 | * -- Removed CDROMMECHANISMSTATUS and CDROMSLOTTABLE | |
157 | * ioctls in favor of a generalized approach | |
158 | * using the generic cdrom driver. | |
159 | * -- Fully integrated with the 2.1.X kernel. | |
160 | * -- Other stuff that I forgot (lots of changes) | |
161 | * | |
162 | * 4.02 Dec 01, 1996 -- Applied patch from Gadi Oxman <gadio@netvision.net.il> | |
163 | * to fix the drive door locking problems. | |
164 | * | |
165 | * 4.03 Dec 04, 1996 -- Added DSC overlap support. | |
166 | * 4.04 Dec 29, 1996 -- Added CDROMREADRAW ioclt based on patch | |
167 | * by Ales Makarov (xmakarov@sun.felk.cvut.cz) | |
168 | * | |
169 | * 4.05 Nov 20, 1997 -- Modified to print more drive info on init | |
170 | * Minor other changes | |
171 | * Fix errors on CDROMSTOP (If you have a "Dolphin", | |
172 | * you must define IHAVEADOLPHIN) | |
173 | * Added identifier so new Sanyo CD-changer works | |
174 | * Better detection if door locking isn't supported | |
175 | * | |
176 | * 4.06 Dec 17, 1997 -- fixed endless "tray open" messages -ml | |
177 | * 4.07 Dec 17, 1997 -- fallback to set pc->stat on "tray open" | |
178 | * 4.08 Dec 18, 1997 -- spew less noise when tray is empty | |
179 | * -- fix speed display for ACER 24X, 18X | |
180 | * 4.09 Jan 04, 1998 -- fix handling of the last block so we return | |
181 | * an end of file instead of an I/O error (Gadi) | |
182 | * 4.10 Jan 24, 1998 -- fixed a bug so now changers can change to a new | |
183 | * slot when there is no disc in the current slot. | |
184 | * -- Fixed a memory leak where info->changer_info was | |
185 | * malloc'ed but never free'd when closing the device. | |
186 | * -- Cleaned up the global namespace a bit by making more | |
187 | * functions static that should already have been. | |
188 | * 4.11 Mar 12, 1998 -- Added support for the CDROM_SELECT_SPEED ioctl | |
189 | * based on a patch for 2.0.33 by Jelle Foks | |
190 | * <jelle@scintilla.utwente.nl>, a patch for 2.0.33 | |
191 | * by Toni Giorgino <toni@pcape2.pi.infn.it>, the SCSI | |
192 | * version, and my own efforts. -erik | |
193 | * -- Fixed a stupid bug which egcs was kind enough to | |
194 | * inform me of where "Illegal mode for this track" | |
195 | * was never returned due to a comparison on data | |
196 | * types of limited range. | |
197 | * 4.12 Mar 29, 1998 -- Fixed bug in CDROM_SELECT_SPEED so write speed is | |
198 | * now set ionly for CD-R and CD-RW drives. I had | |
199 | * removed this support because it produced errors. | |
200 | * It produced errors _only_ for non-writers. duh. | |
201 | * 4.13 May 05, 1998 -- Suppress useless "in progress of becoming ready" | |
202 | * messages, since this is not an error. | |
203 | * -- Change error messages to be const | |
204 | * -- Remove a "\t" which looks ugly in the syslogs | |
205 | * 4.14 July 17, 1998 -- Change to pointing to .ps version of ATAPI spec | |
206 | * since the .pdf version doesn't seem to work... | |
207 | * -- Updated the TODO list to something more current. | |
208 | * | |
209 | * 4.15 Aug 25, 1998 -- Updated ide-cd.h to respect mechine endianess, | |
210 | * patch thanks to "Eddie C. Dost" <ecd@skynet.be> | |
211 | * | |
212 | * 4.50 Oct 19, 1998 -- New maintainers! | |
213 | * Jens Axboe <axboe@image.dk> | |
214 | * Chris Zwilling <chris@cloudnet.com> | |
215 | * | |
216 | * 4.51 Dec 23, 1998 -- Jens Axboe <axboe@image.dk> | |
217 | * - ide_cdrom_reset enabled since the ide subsystem | |
218 | * handles resets fine now. <axboe@image.dk> | |
219 | * - Transfer size fix for Samsung CD-ROMs, thanks to | |
220 | * "Ville Hallik" <ville.hallik@mail.ee>. | |
221 | * - other minor stuff. | |
222 | * | |
223 | * 4.52 Jan 19, 1999 -- Jens Axboe <axboe@image.dk> | |
224 | * - Detect DVD-ROM/RAM drives | |
225 | * | |
226 | * 4.53 Feb 22, 1999 - Include other model Samsung and one Goldstar | |
227 | * drive in transfer size limit. | |
228 | * - Fix the I/O error when doing eject without a medium | |
229 | * loaded on some drives. | |
230 | * - CDROMREADMODE2 is now implemented through | |
231 | * CDROMREADRAW, since many drives don't support | |
232 | * MODE2 (even though ATAPI 2.6 says they must). | |
233 | * - Added ignore parameter to ide-cd (as a module), eg | |
234 | * insmod ide-cd ignore='hda hdb' | |
235 | * Useful when using ide-cd in conjunction with | |
236 | * ide-scsi. TODO: non-modular way of doing the | |
237 | * same. | |
238 | * | |
239 | * 4.54 Aug 5, 1999 - Support for MMC2 class commands through the generic | |
240 | * packet interface to cdrom.c. | |
241 | * - Unified audio ioctl support, most of it. | |
242 | * - cleaned up various deprecated verify_area(). | |
243 | * - Added ide_cdrom_packet() as the interface for | |
244 | * the Uniform generic_packet(). | |
245 | * - bunch of other stuff, will fill in logs later. | |
246 | * - report 1 slot for non-changers, like the other | |
247 | * cd-rom drivers. don't report select disc for | |
248 | * non-changers as well. | |
249 | * - mask out audio playing, if the device can't do it. | |
250 | * | |
251 | * 4.55 Sep 1, 1999 - Eliminated the rest of the audio ioctls, except | |
252 | * for CDROMREADTOC[ENTRY|HEADER]. Some of the drivers | |
253 | * use this independently of the actual audio handling. | |
254 | * They will disappear later when I get the time to | |
255 | * do it cleanly. | |
256 | * - Minimize the TOC reading - only do it when we | |
257 | * know a media change has occurred. | |
258 | * - Moved all the CDROMREADx ioctls to the Uniform layer. | |
259 | * - Heiko Eissfeldt <heiko@colossus.escape.de> supplied | |
260 | * some fixes for CDI. | |
261 | * - CD-ROM leaving door locked fix from Andries | |
262 | * Brouwer <Andries.Brouwer@cwi.nl> | |
263 | * - Erik Andersen <andersen@xmission.com> unified | |
264 | * commands across the various drivers and how | |
265 | * sense errors are handled. | |
266 | * | |
267 | * 4.56 Sep 12, 1999 - Removed changer support - it is now in the | |
268 | * Uniform layer. | |
269 | * - Added partition based multisession handling. | |
270 | * - Mode sense and mode select moved to the | |
271 | * Uniform layer. | |
272 | * - Fixed a problem with WPI CDS-32X drive - it | |
273 | * failed the capabilities | |
274 | * | |
275 | * 4.57 Apr 7, 2000 - Fixed sense reporting. | |
276 | * - Fixed possible oops in ide_cdrom_get_last_session() | |
277 | * - Fix locking mania and make ide_cdrom_reset relock | |
278 | * - Stop spewing errors to log when magicdev polls with | |
279 | * TEST_UNIT_READY on some drives. | |
280 | * - Various fixes from Tobias Ringstrom: | |
281 | * tray if it was locked prior to the reset. | |
282 | * - cdrom_read_capacity returns one frame too little. | |
283 | * - Fix real capacity reporting. | |
284 | * | |
285 | * 4.58 May 1, 2000 - Clean up ACER50 stuff. | |
286 | * - Fix small problem with ide_cdrom_capacity | |
287 | * | |
288 | * 4.59 Aug 11, 2000 - Fix changer problem in cdrom_read_toc, we weren't | |
289 | * correctly sensing a disc change. | |
290 | * - Rearranged some code | |
291 | * - Use extended sense on drives that support it for | |
292 | * correctly reporting tray status -- from | |
293 | * Michael D Johnson <johnsom@orst.edu> | |
294 | * 4.60 Dec 17, 2003 - Add mt rainier support | |
295 | * - Bump timeout for packet commands, matches sr | |
296 | * - Odd stuff | |
297 | * 4.61 Jan 22, 2004 - support hardware sector sizes other than 2kB, | |
298 | * Pascal Schmidt <der.eremit@email.de> | |
299 | * | |
300 | *************************************************************************/ | |
301 | ||
302 | #define IDECD_VERSION "4.61" | |
303 | ||
1da177e4 LT |
304 | #include <linux/module.h> |
305 | #include <linux/types.h> | |
306 | #include <linux/kernel.h> | |
307 | #include <linux/delay.h> | |
308 | #include <linux/timer.h> | |
309 | #include <linux/slab.h> | |
310 | #include <linux/interrupt.h> | |
311 | #include <linux/errno.h> | |
312 | #include <linux/cdrom.h> | |
313 | #include <linux/ide.h> | |
314 | #include <linux/completion.h> | |
cf8b8975 | 315 | #include <linux/mutex.h> |
1da177e4 LT |
316 | |
317 | #include <scsi/scsi.h> /* For SCSI -> ATAPI command conversion */ | |
318 | ||
319 | #include <asm/irq.h> | |
320 | #include <asm/io.h> | |
321 | #include <asm/byteorder.h> | |
322 | #include <asm/uaccess.h> | |
323 | #include <asm/unaligned.h> | |
324 | ||
325 | #include "ide-cd.h" | |
326 | ||
cf8b8975 | 327 | static DEFINE_MUTEX(idecd_ref_mutex); |
1da177e4 LT |
328 | |
329 | #define to_ide_cd(obj) container_of(obj, struct cdrom_info, kref) | |
330 | ||
331 | #define ide_cd_g(disk) \ | |
332 | container_of((disk)->private_data, struct cdrom_info, driver) | |
333 | ||
334 | static struct cdrom_info *ide_cd_get(struct gendisk *disk) | |
335 | { | |
336 | struct cdrom_info *cd = NULL; | |
337 | ||
cf8b8975 | 338 | mutex_lock(&idecd_ref_mutex); |
1da177e4 LT |
339 | cd = ide_cd_g(disk); |
340 | if (cd) | |
341 | kref_get(&cd->kref); | |
cf8b8975 | 342 | mutex_unlock(&idecd_ref_mutex); |
1da177e4 LT |
343 | return cd; |
344 | } | |
345 | ||
346 | static void ide_cd_release(struct kref *); | |
347 | ||
348 | static void ide_cd_put(struct cdrom_info *cd) | |
349 | { | |
cf8b8975 | 350 | mutex_lock(&idecd_ref_mutex); |
1da177e4 | 351 | kref_put(&cd->kref, ide_cd_release); |
cf8b8975 | 352 | mutex_unlock(&idecd_ref_mutex); |
1da177e4 LT |
353 | } |
354 | ||
355 | /**************************************************************************** | |
356 | * Generic packet command support and error handling routines. | |
357 | */ | |
358 | ||
359 | /* Mark that we've seen a media change, and invalidate our internal | |
360 | buffers. */ | |
361 | static void cdrom_saw_media_change (ide_drive_t *drive) | |
362 | { | |
363 | struct cdrom_info *info = drive->driver_data; | |
364 | ||
365 | CDROM_STATE_FLAGS (drive)->media_changed = 1; | |
366 | CDROM_STATE_FLAGS (drive)->toc_valid = 0; | |
367 | info->nsectors_buffered = 0; | |
368 | } | |
369 | ||
370 | static int cdrom_log_sense(ide_drive_t *drive, struct request *rq, | |
371 | struct request_sense *sense) | |
372 | { | |
373 | int log = 0; | |
374 | ||
4aff5e23 | 375 | if (!sense || !rq || (rq->cmd_flags & REQ_QUIET)) |
1da177e4 LT |
376 | return 0; |
377 | ||
378 | switch (sense->sense_key) { | |
379 | case NO_SENSE: case RECOVERED_ERROR: | |
380 | break; | |
381 | case NOT_READY: | |
382 | /* | |
383 | * don't care about tray state messages for | |
384 | * e.g. capacity commands or in-progress or | |
385 | * becoming ready | |
386 | */ | |
387 | if (sense->asc == 0x3a || sense->asc == 0x04) | |
388 | break; | |
389 | log = 1; | |
390 | break; | |
391 | case ILLEGAL_REQUEST: | |
392 | /* | |
393 | * don't log START_STOP unit with LoEj set, since | |
394 | * we cannot reliably check if drive can auto-close | |
395 | */ | |
396 | if (rq->cmd[0] == GPCMD_START_STOP_UNIT && sense->asc == 0x24) | |
dbe217af AC |
397 | break; |
398 | log = 1; | |
1da177e4 LT |
399 | break; |
400 | case UNIT_ATTENTION: | |
401 | /* | |
402 | * Make good and sure we've seen this potential media | |
403 | * change. Some drives (i.e. Creative) fail to present | |
404 | * the correct sense key in the error register. | |
405 | */ | |
406 | cdrom_saw_media_change(drive); | |
407 | break; | |
408 | default: | |
409 | log = 1; | |
410 | break; | |
411 | } | |
412 | return log; | |
413 | } | |
414 | ||
415 | static | |
416 | void cdrom_analyze_sense_data(ide_drive_t *drive, | |
417 | struct request *failed_command, | |
418 | struct request_sense *sense) | |
419 | { | |
dbe217af AC |
420 | unsigned long sector; |
421 | unsigned long bio_sectors; | |
422 | unsigned long valid; | |
423 | struct cdrom_info *info = drive->driver_data; | |
424 | ||
1da177e4 LT |
425 | if (!cdrom_log_sense(drive, failed_command, sense)) |
426 | return; | |
427 | ||
428 | /* | |
429 | * If a read toc is executed for a CD-R or CD-RW medium where | |
430 | * the first toc has not been recorded yet, it will fail with | |
431 | * 05/24/00 (which is a confusing error) | |
432 | */ | |
433 | if (failed_command && failed_command->cmd[0] == GPCMD_READ_TOC_PMA_ATIP) | |
434 | if (sense->sense_key == 0x05 && sense->asc == 0x24) | |
435 | return; | |
436 | ||
dbe217af AC |
437 | if (sense->error_code == 0x70) { /* Current Error */ |
438 | switch(sense->sense_key) { | |
439 | case MEDIUM_ERROR: | |
440 | case VOLUME_OVERFLOW: | |
441 | case ILLEGAL_REQUEST: | |
442 | if (!sense->valid) | |
443 | break; | |
444 | if (failed_command == NULL || | |
445 | !blk_fs_request(failed_command)) | |
446 | break; | |
447 | sector = (sense->information[0] << 24) | | |
448 | (sense->information[1] << 16) | | |
449 | (sense->information[2] << 8) | | |
450 | (sense->information[3]); | |
451 | ||
452 | bio_sectors = bio_sectors(failed_command->bio); | |
453 | if (bio_sectors < 4) | |
454 | bio_sectors = 4; | |
455 | if (drive->queue->hardsect_size == 2048) | |
456 | sector <<= 2; /* Device sector size is 2K */ | |
457 | sector &= ~(bio_sectors -1); | |
458 | valid = (sector - failed_command->sector) << 9; | |
459 | ||
460 | if (valid < 0) | |
461 | valid = 0; | |
462 | if (sector < get_capacity(info->disk) && | |
463 | drive->probed_capacity - sector < 4 * 75) { | |
464 | set_capacity(info->disk, sector); | |
465 | } | |
466 | } | |
467 | } | |
1da177e4 LT |
468 | #if VERBOSE_IDE_CD_ERRORS |
469 | { | |
470 | int i; | |
70d1d47c | 471 | const char *s = "bad sense key!"; |
1da177e4 LT |
472 | char buf[80]; |
473 | ||
474 | printk ("ATAPI device %s:\n", drive->name); | |
475 | if (sense->error_code==0x70) | |
476 | printk(" Error: "); | |
477 | else if (sense->error_code==0x71) | |
478 | printk(" Deferred Error: "); | |
479 | else if (sense->error_code == 0x7f) | |
480 | printk(" Vendor-specific Error: "); | |
481 | else | |
482 | printk(" Unknown Error Type: "); | |
483 | ||
484 | if (sense->sense_key < ARY_LEN(sense_key_texts)) | |
485 | s = sense_key_texts[sense->sense_key]; | |
1da177e4 LT |
486 | |
487 | printk("%s -- (Sense key=0x%02x)\n", s, sense->sense_key); | |
488 | ||
489 | if (sense->asc == 0x40) { | |
490 | sprintf(buf, "Diagnostic failure on component 0x%02x", | |
491 | sense->ascq); | |
492 | s = buf; | |
493 | } else { | |
494 | int lo = 0, mid, hi = ARY_LEN(sense_data_texts); | |
495 | unsigned long key = (sense->sense_key << 16); | |
496 | key |= (sense->asc << 8); | |
497 | if (!(sense->ascq >= 0x80 && sense->ascq <= 0xdd)) | |
498 | key |= sense->ascq; | |
499 | s = NULL; | |
500 | ||
501 | while (hi > lo) { | |
502 | mid = (lo + hi) / 2; | |
503 | if (sense_data_texts[mid].asc_ascq == key || | |
504 | sense_data_texts[mid].asc_ascq == (0xff0000|key)) { | |
505 | s = sense_data_texts[mid].text; | |
506 | break; | |
507 | } | |
508 | else if (sense_data_texts[mid].asc_ascq > key) | |
509 | hi = mid; | |
510 | else | |
511 | lo = mid+1; | |
512 | } | |
513 | } | |
514 | ||
515 | if (s == NULL) { | |
516 | if (sense->asc > 0x80) | |
517 | s = "(vendor-specific error)"; | |
518 | else | |
519 | s = "(reserved error code)"; | |
520 | } | |
521 | ||
522 | printk(KERN_ERR " %s -- (asc=0x%02x, ascq=0x%02x)\n", | |
523 | s, sense->asc, sense->ascq); | |
524 | ||
525 | if (failed_command != NULL) { | |
526 | ||
527 | int lo=0, mid, hi= ARY_LEN (packet_command_texts); | |
528 | s = NULL; | |
529 | ||
530 | while (hi > lo) { | |
531 | mid = (lo + hi) / 2; | |
532 | if (packet_command_texts[mid].packet_command == | |
533 | failed_command->cmd[0]) { | |
534 | s = packet_command_texts[mid].text; | |
535 | break; | |
536 | } | |
537 | if (packet_command_texts[mid].packet_command > | |
538 | failed_command->cmd[0]) | |
539 | hi = mid; | |
540 | else | |
541 | lo = mid+1; | |
542 | } | |
543 | ||
544 | printk (KERN_ERR " The failed \"%s\" packet command was: \n \"", s); | |
545 | for (i=0; i<sizeof (failed_command->cmd); i++) | |
546 | printk ("%02x ", failed_command->cmd[i]); | |
547 | printk ("\"\n"); | |
548 | } | |
549 | ||
550 | /* The SKSV bit specifies validity of the sense_key_specific | |
551 | * in the next two commands. It is bit 7 of the first byte. | |
552 | * In the case of NOT_READY, if SKSV is set the drive can | |
553 | * give us nice ETA readings. | |
554 | */ | |
555 | if (sense->sense_key == NOT_READY && (sense->sks[0] & 0x80)) { | |
556 | int progress = (sense->sks[1] << 8 | sense->sks[2]) * 100; | |
557 | printk(KERN_ERR " Command is %02d%% complete\n", progress / 0xffff); | |
558 | ||
559 | } | |
560 | ||
561 | if (sense->sense_key == ILLEGAL_REQUEST && | |
562 | (sense->sks[0] & 0x80) != 0) { | |
563 | printk(KERN_ERR " Error in %s byte %d", | |
564 | (sense->sks[0] & 0x40) != 0 ? | |
565 | "command packet" : "command data", | |
566 | (sense->sks[1] << 8) + sense->sks[2]); | |
567 | ||
568 | if ((sense->sks[0] & 0x40) != 0) | |
569 | printk (" bit %d", sense->sks[0] & 0x07); | |
570 | ||
571 | printk ("\n"); | |
572 | } | |
573 | } | |
574 | ||
575 | #else /* not VERBOSE_IDE_CD_ERRORS */ | |
576 | ||
577 | /* Suppress printing unit attention and `in progress of becoming ready' | |
578 | errors when we're not being verbose. */ | |
579 | ||
580 | if (sense->sense_key == UNIT_ATTENTION || | |
581 | (sense->sense_key == NOT_READY && (sense->asc == 4 || | |
582 | sense->asc == 0x3a))) | |
583 | return; | |
584 | ||
585 | printk(KERN_ERR "%s: error code: 0x%02x sense_key: 0x%02x asc: 0x%02x ascq: 0x%02x\n", | |
586 | drive->name, | |
587 | sense->error_code, sense->sense_key, | |
588 | sense->asc, sense->ascq); | |
589 | #endif /* not VERBOSE_IDE_CD_ERRORS */ | |
590 | } | |
591 | ||
592 | /* | |
593 | * Initialize a ide-cd packet command request | |
594 | */ | |
595 | static void cdrom_prepare_request(ide_drive_t *drive, struct request *rq) | |
596 | { | |
597 | struct cdrom_info *cd = drive->driver_data; | |
598 | ||
599 | ide_init_drive_cmd(rq); | |
cea2885a | 600 | rq->cmd_type = REQ_TYPE_ATA_PC; |
1da177e4 LT |
601 | rq->rq_disk = cd->disk; |
602 | } | |
603 | ||
604 | static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense, | |
605 | struct request *failed_command) | |
606 | { | |
607 | struct cdrom_info *info = drive->driver_data; | |
608 | struct request *rq = &info->request_sense_request; | |
609 | ||
610 | if (sense == NULL) | |
611 | sense = &info->sense_data; | |
612 | ||
613 | /* stuff the sense request in front of our current request */ | |
614 | cdrom_prepare_request(drive, rq); | |
615 | ||
616 | rq->data = sense; | |
617 | rq->cmd[0] = GPCMD_REQUEST_SENSE; | |
618 | rq->cmd[4] = rq->data_len = 18; | |
619 | ||
4aff5e23 | 620 | rq->cmd_type = REQ_TYPE_SENSE; |
1da177e4 LT |
621 | |
622 | /* NOTE! Save the failed command in "rq->buffer" */ | |
623 | rq->buffer = (void *) failed_command; | |
624 | ||
625 | (void) ide_do_drive_cmd(drive, rq, ide_preempt); | |
626 | } | |
627 | ||
628 | static void cdrom_end_request (ide_drive_t *drive, int uptodate) | |
629 | { | |
630 | struct request *rq = HWGROUP(drive)->rq; | |
631 | int nsectors = rq->hard_cur_sectors; | |
632 | ||
4aff5e23 | 633 | if (blk_sense_request(rq) && uptodate) { |
1da177e4 | 634 | /* |
4aff5e23 JA |
635 | * For REQ_TYPE_SENSE, "rq->buffer" points to the original |
636 | * failed request | |
1da177e4 LT |
637 | */ |
638 | struct request *failed = (struct request *) rq->buffer; | |
639 | struct cdrom_info *info = drive->driver_data; | |
640 | void *sense = &info->sense_data; | |
641 | unsigned long flags; | |
642 | ||
643 | if (failed) { | |
644 | if (failed->sense) { | |
645 | sense = failed->sense; | |
646 | failed->sense_len = rq->sense_len; | |
647 | } | |
dbe217af | 648 | cdrom_analyze_sense_data(drive, failed, sense); |
1da177e4 LT |
649 | /* |
650 | * now end failed request | |
651 | */ | |
dbe217af AC |
652 | if (blk_fs_request(failed)) { |
653 | if (ide_end_dequeued_request(drive, failed, 0, | |
654 | failed->hard_nr_sectors)) | |
655 | BUG(); | |
656 | } else { | |
657 | spin_lock_irqsave(&ide_lock, flags); | |
658 | end_that_request_chunk(failed, 0, | |
659 | failed->data_len); | |
660 | end_that_request_last(failed, 0); | |
661 | spin_unlock_irqrestore(&ide_lock, flags); | |
662 | } | |
663 | } else | |
664 | cdrom_analyze_sense_data(drive, NULL, sense); | |
1da177e4 LT |
665 | } |
666 | ||
667 | if (!rq->current_nr_sectors && blk_fs_request(rq)) | |
668 | uptodate = 1; | |
669 | /* make sure it's fully ended */ | |
670 | if (blk_pc_request(rq)) | |
671 | nsectors = (rq->data_len + 511) >> 9; | |
672 | if (!nsectors) | |
673 | nsectors = 1; | |
674 | ||
675 | ide_end_request(drive, uptodate, nsectors); | |
676 | } | |
677 | ||
dbe217af AC |
678 | static void ide_dump_status_no_sense(ide_drive_t *drive, const char *msg, u8 stat) |
679 | { | |
680 | if (stat & 0x80) | |
681 | return; | |
682 | ide_dump_status(drive, msg, stat); | |
683 | } | |
684 | ||
1da177e4 LT |
685 | /* Returns 0 if the request should be continued. |
686 | Returns 1 if the request was ended. */ | |
687 | static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret) | |
688 | { | |
689 | struct request *rq = HWGROUP(drive)->rq; | |
690 | int stat, err, sense_key; | |
691 | ||
692 | /* Check for errors. */ | |
693 | stat = HWIF(drive)->INB(IDE_STATUS_REG); | |
694 | if (stat_ret) | |
695 | *stat_ret = stat; | |
696 | ||
697 | if (OK_STAT(stat, good_stat, BAD_R_STAT)) | |
698 | return 0; | |
699 | ||
700 | /* Get the IDE error register. */ | |
701 | err = HWIF(drive)->INB(IDE_ERROR_REG); | |
702 | sense_key = err >> 4; | |
703 | ||
704 | if (rq == NULL) { | |
705 | printk("%s: missing rq in cdrom_decode_status\n", drive->name); | |
706 | return 1; | |
707 | } | |
708 | ||
4aff5e23 | 709 | if (blk_sense_request(rq)) { |
1da177e4 LT |
710 | /* We got an error trying to get sense info |
711 | from the drive (probably while trying | |
712 | to recover from a former error). Just give up. */ | |
713 | ||
4aff5e23 | 714 | rq->cmd_flags |= REQ_FAILED; |
1da177e4 LT |
715 | cdrom_end_request(drive, 0); |
716 | ide_error(drive, "request sense failure", stat); | |
717 | return 1; | |
718 | ||
8770c018 | 719 | } else if (blk_pc_request(rq) || rq->cmd_type == REQ_TYPE_ATA_PC) { |
1da177e4 LT |
720 | /* All other functions, except for READ. */ |
721 | unsigned long flags; | |
722 | ||
723 | /* | |
724 | * if we have an error, pass back CHECK_CONDITION as the | |
725 | * scsi status byte | |
726 | */ | |
b7156731 | 727 | if (blk_pc_request(rq) && !rq->errors) |
1da177e4 LT |
728 | rq->errors = SAM_STAT_CHECK_CONDITION; |
729 | ||
730 | /* Check for tray open. */ | |
731 | if (sense_key == NOT_READY) { | |
732 | cdrom_saw_media_change (drive); | |
733 | } else if (sense_key == UNIT_ATTENTION) { | |
734 | /* Check for media change. */ | |
735 | cdrom_saw_media_change (drive); | |
736 | /*printk("%s: media changed\n",drive->name);*/ | |
737 | return 0; | |
4aff5e23 | 738 | } else if (!(rq->cmd_flags & REQ_QUIET)) { |
1da177e4 LT |
739 | /* Otherwise, print an error. */ |
740 | ide_dump_status(drive, "packet command error", stat); | |
741 | } | |
742 | ||
4aff5e23 | 743 | rq->cmd_flags |= REQ_FAILED; |
1da177e4 LT |
744 | |
745 | /* | |
746 | * instead of playing games with moving completions around, | |
747 | * remove failed request completely and end it when the | |
748 | * request sense has completed | |
749 | */ | |
750 | if (stat & ERR_STAT) { | |
751 | spin_lock_irqsave(&ide_lock, flags); | |
752 | blkdev_dequeue_request(rq); | |
753 | HWGROUP(drive)->rq = NULL; | |
754 | spin_unlock_irqrestore(&ide_lock, flags); | |
755 | ||
756 | cdrom_queue_request_sense(drive, rq->sense, rq); | |
757 | } else | |
758 | cdrom_end_request(drive, 0); | |
759 | ||
760 | } else if (blk_fs_request(rq)) { | |
761 | int do_end_request = 0; | |
762 | ||
763 | /* Handle errors from READ and WRITE requests. */ | |
764 | ||
765 | if (blk_noretry_request(rq)) | |
766 | do_end_request = 1; | |
767 | ||
768 | if (sense_key == NOT_READY) { | |
769 | /* Tray open. */ | |
770 | if (rq_data_dir(rq) == READ) { | |
771 | cdrom_saw_media_change (drive); | |
772 | ||
773 | /* Fail the request. */ | |
774 | printk ("%s: tray open\n", drive->name); | |
775 | do_end_request = 1; | |
776 | } else { | |
777 | struct cdrom_info *info = drive->driver_data; | |
778 | ||
779 | /* allow the drive 5 seconds to recover, some | |
780 | * devices will return this error while flushing | |
781 | * data from cache */ | |
782 | if (!rq->errors) | |
783 | info->write_timeout = jiffies + ATAPI_WAIT_WRITE_BUSY; | |
784 | rq->errors = 1; | |
785 | if (time_after(jiffies, info->write_timeout)) | |
786 | do_end_request = 1; | |
787 | else { | |
788 | unsigned long flags; | |
789 | ||
790 | /* | |
791 | * take a breather relying on the | |
792 | * unplug timer to kick us again | |
793 | */ | |
794 | spin_lock_irqsave(&ide_lock, flags); | |
795 | blk_plug_device(drive->queue); | |
796 | spin_unlock_irqrestore(&ide_lock,flags); | |
797 | return 1; | |
798 | } | |
799 | } | |
800 | } else if (sense_key == UNIT_ATTENTION) { | |
801 | /* Media change. */ | |
802 | cdrom_saw_media_change (drive); | |
803 | ||
804 | /* Arrange to retry the request. | |
805 | But be sure to give up if we've retried | |
806 | too many times. */ | |
807 | if (++rq->errors > ERROR_MAX) | |
808 | do_end_request = 1; | |
809 | } else if (sense_key == ILLEGAL_REQUEST || | |
810 | sense_key == DATA_PROTECT) { | |
811 | /* No point in retrying after an illegal | |
812 | request or data protect error.*/ | |
dbe217af | 813 | ide_dump_status_no_sense (drive, "command error", stat); |
1da177e4 LT |
814 | do_end_request = 1; |
815 | } else if (sense_key == MEDIUM_ERROR) { | |
816 | /* No point in re-trying a zillion times on a bad | |
817 | * sector... If we got here the error is not correctable */ | |
dbe217af | 818 | ide_dump_status_no_sense (drive, "media error (bad sector)", stat); |
1da177e4 LT |
819 | do_end_request = 1; |
820 | } else if (sense_key == BLANK_CHECK) { | |
821 | /* Disk appears blank ?? */ | |
dbe217af | 822 | ide_dump_status_no_sense (drive, "media error (blank)", stat); |
1da177e4 LT |
823 | do_end_request = 1; |
824 | } else if ((err & ~ABRT_ERR) != 0) { | |
825 | /* Go to the default handler | |
826 | for other errors. */ | |
827 | ide_error(drive, "cdrom_decode_status", stat); | |
828 | return 1; | |
829 | } else if ((++rq->errors > ERROR_MAX)) { | |
830 | /* We've racked up too many retries. Abort. */ | |
831 | do_end_request = 1; | |
832 | } | |
833 | ||
dbe217af AC |
834 | /* End a request through request sense analysis when we have |
835 | sense data. We need this in order to perform end of media | |
836 | processing */ | |
837 | ||
838 | if (do_end_request) { | |
839 | if (stat & ERR_STAT) { | |
840 | unsigned long flags; | |
841 | spin_lock_irqsave(&ide_lock, flags); | |
842 | blkdev_dequeue_request(rq); | |
843 | HWGROUP(drive)->rq = NULL; | |
844 | spin_unlock_irqrestore(&ide_lock, flags); | |
845 | ||
846 | cdrom_queue_request_sense(drive, rq->sense, rq); | |
847 | } else | |
848 | cdrom_end_request(drive, 0); | |
849 | } else { | |
850 | /* If we got a CHECK_CONDITION status, | |
851 | queue a request sense command. */ | |
852 | if (stat & ERR_STAT) | |
853 | cdrom_queue_request_sense(drive, NULL, NULL); | |
854 | } | |
1da177e4 LT |
855 | } else { |
856 | blk_dump_rq_flags(rq, "ide-cd: bad rq"); | |
857 | cdrom_end_request(drive, 0); | |
858 | } | |
859 | ||
860 | /* Retry, or handle the next request. */ | |
861 | return 1; | |
862 | } | |
863 | ||
864 | static int cdrom_timer_expiry(ide_drive_t *drive) | |
865 | { | |
866 | struct request *rq = HWGROUP(drive)->rq; | |
867 | unsigned long wait = 0; | |
868 | ||
869 | /* | |
870 | * Some commands are *slow* and normally take a long time to | |
871 | * complete. Usually we can use the ATAPI "disconnect" to bypass | |
872 | * this, but not all commands/drives support that. Let | |
873 | * ide_timer_expiry keep polling us for these. | |
874 | */ | |
875 | switch (rq->cmd[0]) { | |
876 | case GPCMD_BLANK: | |
877 | case GPCMD_FORMAT_UNIT: | |
878 | case GPCMD_RESERVE_RZONE_TRACK: | |
879 | case GPCMD_CLOSE_TRACK: | |
880 | case GPCMD_FLUSH_CACHE: | |
881 | wait = ATAPI_WAIT_PC; | |
882 | break; | |
883 | default: | |
4aff5e23 | 884 | if (!(rq->cmd_flags & REQ_QUIET)) |
1da177e4 LT |
885 | printk(KERN_INFO "ide-cd: cmd 0x%x timed out\n", rq->cmd[0]); |
886 | wait = 0; | |
887 | break; | |
888 | } | |
889 | return wait; | |
890 | } | |
891 | ||
892 | /* Set up the device registers for transferring a packet command on DEV, | |
893 | expecting to later transfer XFERLEN bytes. HANDLER is the routine | |
894 | which actually transfers the command to the drive. If this is a | |
895 | drq_interrupt device, this routine will arrange for HANDLER to be | |
896 | called when the interrupt from the drive arrives. Otherwise, HANDLER | |
897 | will be called immediately after the drive is prepared for the transfer. */ | |
898 | ||
899 | static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive, | |
900 | int xferlen, | |
901 | ide_handler_t *handler) | |
902 | { | |
903 | ide_startstop_t startstop; | |
904 | struct cdrom_info *info = drive->driver_data; | |
905 | ide_hwif_t *hwif = drive->hwif; | |
906 | ||
907 | /* Wait for the controller to be idle. */ | |
908 | if (ide_wait_stat(&startstop, drive, 0, BUSY_STAT, WAIT_READY)) | |
909 | return startstop; | |
910 | ||
911 | if (info->dma) | |
912 | info->dma = !hwif->dma_setup(drive); | |
913 | ||
914 | /* Set up the controller registers. */ | |
915 | /* FIXME: for Virtual DMA we must check harder */ | |
916 | HWIF(drive)->OUTB(info->dma, IDE_FEATURE_REG); | |
917 | HWIF(drive)->OUTB(0, IDE_IREASON_REG); | |
918 | HWIF(drive)->OUTB(0, IDE_SECTOR_REG); | |
919 | ||
920 | HWIF(drive)->OUTB(xferlen & 0xff, IDE_BCOUNTL_REG); | |
921 | HWIF(drive)->OUTB(xferlen >> 8 , IDE_BCOUNTH_REG); | |
922 | if (IDE_CONTROL_REG) | |
923 | HWIF(drive)->OUTB(drive->ctl, IDE_CONTROL_REG); | |
924 | ||
925 | if (CDROM_CONFIG_FLAGS (drive)->drq_interrupt) { | |
f0dd8712 AL |
926 | /* waiting for CDB interrupt, not DMA yet. */ |
927 | if (info->dma) | |
928 | drive->waiting_for_dma = 0; | |
929 | ||
1da177e4 LT |
930 | /* packet command */ |
931 | ide_execute_command(drive, WIN_PACKETCMD, handler, ATAPI_WAIT_PC, cdrom_timer_expiry); | |
932 | return ide_started; | |
933 | } else { | |
934 | unsigned long flags; | |
935 | ||
936 | /* packet command */ | |
937 | spin_lock_irqsave(&ide_lock, flags); | |
938 | hwif->OUTBSYNC(drive, WIN_PACKETCMD, IDE_COMMAND_REG); | |
939 | ndelay(400); | |
940 | spin_unlock_irqrestore(&ide_lock, flags); | |
941 | ||
942 | return (*handler) (drive); | |
943 | } | |
944 | } | |
945 | ||
946 | /* Send a packet command to DRIVE described by CMD_BUF and CMD_LEN. | |
947 | The device registers must have already been prepared | |
948 | by cdrom_start_packet_command. | |
949 | HANDLER is the interrupt handler to call when the command completes | |
950 | or there's data ready. */ | |
951 | /* | |
952 | * changed 5 parameters to 3 for dvd-ram | |
953 | * struct packet_command *pc; now packet_command_t *pc; | |
954 | */ | |
955 | #define ATAPI_MIN_CDB_BYTES 12 | |
956 | static ide_startstop_t cdrom_transfer_packet_command (ide_drive_t *drive, | |
957 | struct request *rq, | |
958 | ide_handler_t *handler) | |
959 | { | |
960 | ide_hwif_t *hwif = drive->hwif; | |
961 | int cmd_len; | |
962 | struct cdrom_info *info = drive->driver_data; | |
963 | ide_startstop_t startstop; | |
964 | ||
965 | if (CDROM_CONFIG_FLAGS(drive)->drq_interrupt) { | |
966 | /* Here we should have been called after receiving an interrupt | |
967 | from the device. DRQ should how be set. */ | |
968 | ||
969 | /* Check for errors. */ | |
970 | if (cdrom_decode_status(drive, DRQ_STAT, NULL)) | |
971 | return ide_stopped; | |
f0dd8712 AL |
972 | |
973 | /* Ok, next interrupt will be DMA interrupt. */ | |
974 | if (info->dma) | |
975 | drive->waiting_for_dma = 1; | |
1da177e4 LT |
976 | } else { |
977 | /* Otherwise, we must wait for DRQ to get set. */ | |
978 | if (ide_wait_stat(&startstop, drive, DRQ_STAT, | |
979 | BUSY_STAT, WAIT_READY)) | |
980 | return startstop; | |
981 | } | |
982 | ||
983 | /* Arm the interrupt handler. */ | |
984 | ide_set_handler(drive, handler, rq->timeout, cdrom_timer_expiry); | |
985 | ||
986 | /* ATAPI commands get padded out to 12 bytes minimum */ | |
987 | cmd_len = COMMAND_SIZE(rq->cmd[0]); | |
988 | if (cmd_len < ATAPI_MIN_CDB_BYTES) | |
989 | cmd_len = ATAPI_MIN_CDB_BYTES; | |
990 | ||
991 | /* Send the command to the device. */ | |
992 | HWIF(drive)->atapi_output_bytes(drive, rq->cmd, cmd_len); | |
993 | ||
994 | /* Start the DMA if need be */ | |
995 | if (info->dma) | |
996 | hwif->dma_start(drive); | |
997 | ||
998 | return ide_started; | |
999 | } | |
1000 | ||
1001 | /**************************************************************************** | |
1002 | * Block read functions. | |
1003 | */ | |
1004 | ||
1005 | /* | |
1006 | * Buffer up to SECTORS_TO_TRANSFER sectors from the drive in our sector | |
1007 | * buffer. Once the first sector is added, any subsequent sectors are | |
1008 | * assumed to be continuous (until the buffer is cleared). For the first | |
1009 | * sector added, SECTOR is its sector number. (SECTOR is then ignored until | |
1010 | * the buffer is cleared.) | |
1011 | */ | |
1012 | static void cdrom_buffer_sectors (ide_drive_t *drive, unsigned long sector, | |
1013 | int sectors_to_transfer) | |
1014 | { | |
1015 | struct cdrom_info *info = drive->driver_data; | |
1016 | ||
1017 | /* Number of sectors to read into the buffer. */ | |
1018 | int sectors_to_buffer = min_t(int, sectors_to_transfer, | |
1019 | (SECTOR_BUFFER_SIZE >> SECTOR_BITS) - | |
1020 | info->nsectors_buffered); | |
1021 | ||
1022 | char *dest; | |
1023 | ||
1024 | /* If we couldn't get a buffer, don't try to buffer anything... */ | |
1025 | if (info->buffer == NULL) | |
1026 | sectors_to_buffer = 0; | |
1027 | ||
1028 | /* If this is the first sector in the buffer, remember its number. */ | |
1029 | if (info->nsectors_buffered == 0) | |
1030 | info->sector_buffered = sector; | |
1031 | ||
1032 | /* Read the data into the buffer. */ | |
1033 | dest = info->buffer + info->nsectors_buffered * SECTOR_SIZE; | |
1034 | while (sectors_to_buffer > 0) { | |
1035 | HWIF(drive)->atapi_input_bytes(drive, dest, SECTOR_SIZE); | |
1036 | --sectors_to_buffer; | |
1037 | --sectors_to_transfer; | |
1038 | ++info->nsectors_buffered; | |
1039 | dest += SECTOR_SIZE; | |
1040 | } | |
1041 | ||
1042 | /* Throw away any remaining data. */ | |
1043 | while (sectors_to_transfer > 0) { | |
1044 | static char dum[SECTOR_SIZE]; | |
1045 | HWIF(drive)->atapi_input_bytes(drive, dum, sizeof (dum)); | |
1046 | --sectors_to_transfer; | |
1047 | } | |
1048 | } | |
1049 | ||
1050 | /* | |
1051 | * Check the contents of the interrupt reason register from the cdrom | |
1052 | * and attempt to recover if there are problems. Returns 0 if everything's | |
1053 | * ok; nonzero if the request has been terminated. | |
1054 | */ | |
858119e1 | 1055 | static |
1da177e4 LT |
1056 | int cdrom_read_check_ireason (ide_drive_t *drive, int len, int ireason) |
1057 | { | |
1058 | if (ireason == 2) | |
1059 | return 0; | |
1060 | else if (ireason == 0) { | |
1061 | /* Whoops... The drive is expecting to receive data from us! */ | |
1062 | printk(KERN_ERR "%s: read_intr: Drive wants to transfer data the " | |
1063 | "wrong way!\n", drive->name); | |
1064 | ||
1065 | /* Throw some data at the drive so it doesn't hang | |
1066 | and quit this request. */ | |
1067 | while (len > 0) { | |
1068 | int dum = 0; | |
1069 | HWIF(drive)->atapi_output_bytes(drive, &dum, sizeof (dum)); | |
1070 | len -= sizeof (dum); | |
1071 | } | |
1072 | } else if (ireason == 1) { | |
1073 | /* Some drives (ASUS) seem to tell us that status | |
1074 | * info is available. just get it and ignore. | |
1075 | */ | |
1076 | (void) HWIF(drive)->INB(IDE_STATUS_REG); | |
1077 | return 0; | |
1078 | } else { | |
1079 | /* Drive wants a command packet, or invalid ireason... */ | |
1080 | printk(KERN_ERR "%s: read_intr: bad interrupt reason %x\n", drive->name, | |
1081 | ireason); | |
1082 | } | |
1083 | ||
1084 | cdrom_end_request(drive, 0); | |
1085 | return -1; | |
1086 | } | |
1087 | ||
1088 | /* | |
1089 | * Interrupt routine. Called when a read request has completed. | |
1090 | */ | |
1091 | static ide_startstop_t cdrom_read_intr (ide_drive_t *drive) | |
1092 | { | |
1093 | int stat; | |
1094 | int ireason, len, sectors_to_transfer, nskip; | |
1095 | struct cdrom_info *info = drive->driver_data; | |
1096 | u8 lowcyl = 0, highcyl = 0; | |
1097 | int dma = info->dma, dma_error = 0; | |
1098 | ||
1099 | struct request *rq = HWGROUP(drive)->rq; | |
1100 | ||
1101 | /* | |
1102 | * handle dma case | |
1103 | */ | |
1104 | if (dma) { | |
1105 | info->dma = 0; | |
1106 | if ((dma_error = HWIF(drive)->ide_dma_end(drive))) | |
1107 | __ide_dma_off(drive); | |
1108 | } | |
1109 | ||
1110 | if (cdrom_decode_status(drive, 0, &stat)) | |
1111 | return ide_stopped; | |
1112 | ||
1113 | if (dma) { | |
1114 | if (!dma_error) { | |
1115 | ide_end_request(drive, 1, rq->nr_sectors); | |
1116 | return ide_stopped; | |
1117 | } else | |
1118 | return ide_error(drive, "dma error", stat); | |
1119 | } | |
1120 | ||
1121 | /* Read the interrupt reason and the transfer length. */ | |
1122 | ireason = HWIF(drive)->INB(IDE_IREASON_REG) & 0x3; | |
1123 | lowcyl = HWIF(drive)->INB(IDE_BCOUNTL_REG); | |
1124 | highcyl = HWIF(drive)->INB(IDE_BCOUNTH_REG); | |
1125 | ||
1126 | len = lowcyl + (256 * highcyl); | |
1127 | ||
1128 | /* If DRQ is clear, the command has completed. */ | |
1129 | if ((stat & DRQ_STAT) == 0) { | |
1130 | /* If we're not done filling the current buffer, complain. | |
1131 | Otherwise, complete the command normally. */ | |
1132 | if (rq->current_nr_sectors > 0) { | |
1133 | printk (KERN_ERR "%s: cdrom_read_intr: data underrun (%d blocks)\n", | |
1134 | drive->name, rq->current_nr_sectors); | |
4aff5e23 | 1135 | rq->cmd_flags |= REQ_FAILED; |
1da177e4 LT |
1136 | cdrom_end_request(drive, 0); |
1137 | } else | |
1138 | cdrom_end_request(drive, 1); | |
1139 | return ide_stopped; | |
1140 | } | |
1141 | ||
1142 | /* Check that the drive is expecting to do the same thing we are. */ | |
1143 | if (cdrom_read_check_ireason (drive, len, ireason)) | |
1144 | return ide_stopped; | |
1145 | ||
1146 | /* Assume that the drive will always provide data in multiples | |
1147 | of at least SECTOR_SIZE, as it gets hairy to keep track | |
1148 | of the transfers otherwise. */ | |
1149 | if ((len % SECTOR_SIZE) != 0) { | |
1150 | printk (KERN_ERR "%s: cdrom_read_intr: Bad transfer size %d\n", | |
1151 | drive->name, len); | |
1152 | if (CDROM_CONFIG_FLAGS(drive)->limit_nframes) | |
1153 | printk (KERN_ERR " This drive is not supported by this version of the driver\n"); | |
1154 | else { | |
1155 | printk (KERN_ERR " Trying to limit transfer sizes\n"); | |
1156 | CDROM_CONFIG_FLAGS(drive)->limit_nframes = 1; | |
1157 | } | |
1158 | cdrom_end_request(drive, 0); | |
1159 | return ide_stopped; | |
1160 | } | |
1161 | ||
1162 | /* The number of sectors we need to read from the drive. */ | |
1163 | sectors_to_transfer = len / SECTOR_SIZE; | |
1164 | ||
1165 | /* First, figure out if we need to bit-bucket | |
1166 | any of the leading sectors. */ | |
1167 | nskip = min_t(int, rq->current_nr_sectors - bio_cur_sectors(rq->bio), sectors_to_transfer); | |
1168 | ||
1169 | while (nskip > 0) { | |
1170 | /* We need to throw away a sector. */ | |
1171 | static char dum[SECTOR_SIZE]; | |
1172 | HWIF(drive)->atapi_input_bytes(drive, dum, sizeof (dum)); | |
1173 | ||
1174 | --rq->current_nr_sectors; | |
1175 | --nskip; | |
1176 | --sectors_to_transfer; | |
1177 | } | |
1178 | ||
1179 | /* Now loop while we still have data to read from the drive. */ | |
1180 | while (sectors_to_transfer > 0) { | |
1181 | int this_transfer; | |
1182 | ||
1183 | /* If we've filled the present buffer but there's another | |
1184 | chained buffer after it, move on. */ | |
1185 | if (rq->current_nr_sectors == 0 && rq->nr_sectors) | |
1186 | cdrom_end_request(drive, 1); | |
1187 | ||
1188 | /* If the buffers are full, cache the rest of the data in our | |
1189 | internal buffer. */ | |
1190 | if (rq->current_nr_sectors == 0) { | |
1191 | cdrom_buffer_sectors(drive, rq->sector, sectors_to_transfer); | |
1192 | sectors_to_transfer = 0; | |
1193 | } else { | |
1194 | /* Transfer data to the buffers. | |
1195 | Figure out how many sectors we can transfer | |
1196 | to the current buffer. */ | |
1197 | this_transfer = min_t(int, sectors_to_transfer, | |
1198 | rq->current_nr_sectors); | |
1199 | ||
1200 | /* Read this_transfer sectors | |
1201 | into the current buffer. */ | |
1202 | while (this_transfer > 0) { | |
1203 | HWIF(drive)->atapi_input_bytes(drive, rq->buffer, SECTOR_SIZE); | |
1204 | rq->buffer += SECTOR_SIZE; | |
1205 | --rq->nr_sectors; | |
1206 | --rq->current_nr_sectors; | |
1207 | ++rq->sector; | |
1208 | --this_transfer; | |
1209 | --sectors_to_transfer; | |
1210 | } | |
1211 | } | |
1212 | } | |
1213 | ||
1214 | /* Done moving data! Wait for another interrupt. */ | |
1215 | ide_set_handler(drive, &cdrom_read_intr, ATAPI_WAIT_PC, NULL); | |
1216 | return ide_started; | |
1217 | } | |
1218 | ||
1219 | /* | |
1220 | * Try to satisfy some of the current read request from our cached data. | |
1221 | * Returns nonzero if the request has been completed, zero otherwise. | |
1222 | */ | |
1223 | static int cdrom_read_from_buffer (ide_drive_t *drive) | |
1224 | { | |
1225 | struct cdrom_info *info = drive->driver_data; | |
1226 | struct request *rq = HWGROUP(drive)->rq; | |
1227 | unsigned short sectors_per_frame; | |
1228 | ||
1229 | sectors_per_frame = queue_hardsect_size(drive->queue) >> SECTOR_BITS; | |
1230 | ||
1231 | /* Can't do anything if there's no buffer. */ | |
1232 | if (info->buffer == NULL) return 0; | |
1233 | ||
1234 | /* Loop while this request needs data and the next block is present | |
1235 | in our cache. */ | |
1236 | while (rq->nr_sectors > 0 && | |
1237 | rq->sector >= info->sector_buffered && | |
1238 | rq->sector < info->sector_buffered + info->nsectors_buffered) { | |
1239 | if (rq->current_nr_sectors == 0) | |
1240 | cdrom_end_request(drive, 1); | |
1241 | ||
1242 | memcpy (rq->buffer, | |
1243 | info->buffer + | |
1244 | (rq->sector - info->sector_buffered) * SECTOR_SIZE, | |
1245 | SECTOR_SIZE); | |
1246 | rq->buffer += SECTOR_SIZE; | |
1247 | --rq->current_nr_sectors; | |
1248 | --rq->nr_sectors; | |
1249 | ++rq->sector; | |
1250 | } | |
1251 | ||
1252 | /* If we've satisfied the current request, | |
1253 | terminate it successfully. */ | |
1254 | if (rq->nr_sectors == 0) { | |
1255 | cdrom_end_request(drive, 1); | |
1256 | return -1; | |
1257 | } | |
1258 | ||
1259 | /* Move on to the next buffer if needed. */ | |
1260 | if (rq->current_nr_sectors == 0) | |
1261 | cdrom_end_request(drive, 1); | |
1262 | ||
1263 | /* If this condition does not hold, then the kluge i use to | |
1264 | represent the number of sectors to skip at the start of a transfer | |
1265 | will fail. I think that this will never happen, but let's be | |
1266 | paranoid and check. */ | |
1267 | if (rq->current_nr_sectors < bio_cur_sectors(rq->bio) && | |
1268 | (rq->sector & (sectors_per_frame - 1))) { | |
1269 | printk(KERN_ERR "%s: cdrom_read_from_buffer: buffer botch (%ld)\n", | |
1270 | drive->name, (long)rq->sector); | |
1271 | cdrom_end_request(drive, 0); | |
1272 | return -1; | |
1273 | } | |
1274 | ||
1275 | return 0; | |
1276 | } | |
1277 | ||
1278 | /* | |
1279 | * Routine to send a read packet command to the drive. | |
1280 | * This is usually called directly from cdrom_start_read. | |
1281 | * However, for drq_interrupt devices, it is called from an interrupt | |
1282 | * when the drive is ready to accept the command. | |
1283 | */ | |
1284 | static ide_startstop_t cdrom_start_read_continuation (ide_drive_t *drive) | |
1285 | { | |
1286 | struct request *rq = HWGROUP(drive)->rq; | |
1287 | unsigned short sectors_per_frame; | |
1288 | int nskip; | |
1289 | ||
1290 | sectors_per_frame = queue_hardsect_size(drive->queue) >> SECTOR_BITS; | |
1291 | ||
1292 | /* If the requested sector doesn't start on a cdrom block boundary, | |
1293 | we must adjust the start of the transfer so that it does, | |
1294 | and remember to skip the first few sectors. | |
1295 | If the CURRENT_NR_SECTORS field is larger than the size | |
1296 | of the buffer, it will mean that we're to skip a number | |
1297 | of sectors equal to the amount by which CURRENT_NR_SECTORS | |
1298 | is larger than the buffer size. */ | |
1299 | nskip = rq->sector & (sectors_per_frame - 1); | |
1300 | if (nskip > 0) { | |
1301 | /* Sanity check... */ | |
1302 | if (rq->current_nr_sectors != bio_cur_sectors(rq->bio) && | |
1303 | (rq->sector & (sectors_per_frame - 1))) { | |
1304 | printk(KERN_ERR "%s: cdrom_start_read_continuation: buffer botch (%u)\n", | |
1305 | drive->name, rq->current_nr_sectors); | |
1306 | cdrom_end_request(drive, 0); | |
1307 | return ide_stopped; | |
1308 | } | |
1309 | rq->current_nr_sectors += nskip; | |
1310 | } | |
1311 | ||
1312 | /* Set up the command */ | |
1313 | rq->timeout = ATAPI_WAIT_PC; | |
1314 | ||
1315 | /* Send the command to the drive and return. */ | |
1316 | return cdrom_transfer_packet_command(drive, rq, &cdrom_read_intr); | |
1317 | } | |
1318 | ||
1319 | ||
1320 | #define IDECD_SEEK_THRESHOLD (1000) /* 1000 blocks */ | |
1321 | #define IDECD_SEEK_TIMER (5 * WAIT_MIN_SLEEP) /* 100 ms */ | |
1322 | #define IDECD_SEEK_TIMEOUT (2 * WAIT_CMD) /* 20 sec */ | |
1323 | ||
1324 | static ide_startstop_t cdrom_seek_intr (ide_drive_t *drive) | |
1325 | { | |
1326 | struct cdrom_info *info = drive->driver_data; | |
1327 | int stat; | |
1328 | static int retry = 10; | |
1329 | ||
1330 | if (cdrom_decode_status(drive, 0, &stat)) | |
1331 | return ide_stopped; | |
1332 | CDROM_CONFIG_FLAGS(drive)->seeking = 1; | |
1333 | ||
1334 | if (retry && time_after(jiffies, info->start_seek + IDECD_SEEK_TIMER)) { | |
1335 | if (--retry == 0) { | |
1336 | /* | |
1337 | * this condition is far too common, to bother | |
1338 | * users about it | |
1339 | */ | |
1340 | /* printk("%s: disabled DSC seek overlap\n", drive->name);*/ | |
1341 | drive->dsc_overlap = 0; | |
1342 | } | |
1343 | } | |
1344 | return ide_stopped; | |
1345 | } | |
1346 | ||
1347 | static ide_startstop_t cdrom_start_seek_continuation (ide_drive_t *drive) | |
1348 | { | |
1349 | struct request *rq = HWGROUP(drive)->rq; | |
1350 | sector_t frame = rq->sector; | |
1351 | ||
1352 | sector_div(frame, queue_hardsect_size(drive->queue) >> SECTOR_BITS); | |
1353 | ||
1354 | memset(rq->cmd, 0, sizeof(rq->cmd)); | |
1355 | rq->cmd[0] = GPCMD_SEEK; | |
1356 | put_unaligned(cpu_to_be32(frame), (unsigned int *) &rq->cmd[2]); | |
1357 | ||
1358 | rq->timeout = ATAPI_WAIT_PC; | |
1359 | return cdrom_transfer_packet_command(drive, rq, &cdrom_seek_intr); | |
1360 | } | |
1361 | ||
1362 | static ide_startstop_t cdrom_start_seek (ide_drive_t *drive, unsigned int block) | |
1363 | { | |
1364 | struct cdrom_info *info = drive->driver_data; | |
1365 | ||
1366 | info->dma = 0; | |
1da177e4 LT |
1367 | info->start_seek = jiffies; |
1368 | return cdrom_start_packet_command(drive, 0, cdrom_start_seek_continuation); | |
1369 | } | |
1370 | ||
1371 | /* Fix up a possibly partially-processed request so that we can | |
1372 | start it over entirely, or even put it back on the request queue. */ | |
1373 | static void restore_request (struct request *rq) | |
1374 | { | |
1375 | if (rq->buffer != bio_data(rq->bio)) { | |
1376 | sector_t n = (rq->buffer - (char *) bio_data(rq->bio)) / SECTOR_SIZE; | |
1377 | ||
1378 | rq->buffer = bio_data(rq->bio); | |
1379 | rq->nr_sectors += n; | |
1380 | rq->sector -= n; | |
1381 | } | |
1382 | rq->hard_cur_sectors = rq->current_nr_sectors = bio_cur_sectors(rq->bio); | |
1383 | rq->hard_nr_sectors = rq->nr_sectors; | |
1384 | rq->hard_sector = rq->sector; | |
1385 | rq->q->prep_rq_fn(rq->q, rq); | |
1386 | } | |
1387 | ||
1388 | /* | |
1389 | * Start a read request from the CD-ROM. | |
1390 | */ | |
1391 | static ide_startstop_t cdrom_start_read (ide_drive_t *drive, unsigned int block) | |
1392 | { | |
1393 | struct cdrom_info *info = drive->driver_data; | |
1394 | struct request *rq = HWGROUP(drive)->rq; | |
1395 | unsigned short sectors_per_frame; | |
1396 | ||
1397 | sectors_per_frame = queue_hardsect_size(drive->queue) >> SECTOR_BITS; | |
1398 | ||
1399 | /* We may be retrying this request after an error. Fix up | |
1400 | any weirdness which might be present in the request packet. */ | |
1401 | restore_request(rq); | |
1402 | ||
1403 | /* Satisfy whatever we can of this request from our cached sector. */ | |
1404 | if (cdrom_read_from_buffer(drive)) | |
1405 | return ide_stopped; | |
1406 | ||
1da177e4 LT |
1407 | /* Clear the local sector buffer. */ |
1408 | info->nsectors_buffered = 0; | |
1409 | ||
1410 | /* use dma, if possible. */ | |
1411 | info->dma = drive->using_dma; | |
1412 | if ((rq->sector & (sectors_per_frame - 1)) || | |
1413 | (rq->nr_sectors & (sectors_per_frame - 1))) | |
1414 | info->dma = 0; | |
1415 | ||
1da177e4 LT |
1416 | /* Start sending the read request to the drive. */ |
1417 | return cdrom_start_packet_command(drive, 32768, cdrom_start_read_continuation); | |
1418 | } | |
1419 | ||
1420 | /**************************************************************************** | |
1421 | * Execute all other packet commands. | |
1422 | */ | |
1423 | ||
1424 | /* Interrupt routine for packet command completion. */ | |
1425 | static ide_startstop_t cdrom_pc_intr (ide_drive_t *drive) | |
1426 | { | |
1427 | int ireason, len, thislen; | |
1428 | struct request *rq = HWGROUP(drive)->rq; | |
1429 | u8 lowcyl = 0, highcyl = 0; | |
1430 | int stat; | |
1431 | ||
1432 | /* Check for errors. */ | |
1433 | if (cdrom_decode_status(drive, 0, &stat)) | |
1434 | return ide_stopped; | |
1435 | ||
1436 | /* Read the interrupt reason and the transfer length. */ | |
1437 | ireason = HWIF(drive)->INB(IDE_IREASON_REG); | |
1438 | lowcyl = HWIF(drive)->INB(IDE_BCOUNTL_REG); | |
1439 | highcyl = HWIF(drive)->INB(IDE_BCOUNTH_REG); | |
1440 | ||
1441 | len = lowcyl + (256 * highcyl); | |
1442 | ||
1443 | /* If DRQ is clear, the command has completed. | |
1444 | Complain if we still have data left to transfer. */ | |
1445 | if ((stat & DRQ_STAT) == 0) { | |
1446 | /* Some of the trailing request sense fields are optional, and | |
1447 | some drives don't send them. Sigh. */ | |
1448 | if (rq->cmd[0] == GPCMD_REQUEST_SENSE && | |
1449 | rq->data_len > 0 && | |
1450 | rq->data_len <= 5) { | |
1451 | while (rq->data_len > 0) { | |
1452 | *(unsigned char *)rq->data++ = 0; | |
1453 | --rq->data_len; | |
1454 | } | |
1455 | } | |
1456 | ||
1457 | if (rq->data_len == 0) | |
1458 | cdrom_end_request(drive, 1); | |
1459 | else { | |
1460 | /* Comment this out, because this always happens | |
1461 | right after a reset occurs, and it is annoying to | |
1462 | always print expected stuff. */ | |
1463 | /* | |
1464 | printk ("%s: cdrom_pc_intr: data underrun %d\n", | |
1465 | drive->name, pc->buflen); | |
1466 | */ | |
4aff5e23 | 1467 | rq->cmd_flags |= REQ_FAILED; |
1da177e4 LT |
1468 | cdrom_end_request(drive, 0); |
1469 | } | |
1470 | return ide_stopped; | |
1471 | } | |
1472 | ||
1473 | /* Figure out how much data to transfer. */ | |
1474 | thislen = rq->data_len; | |
1475 | if (thislen > len) thislen = len; | |
1476 | ||
1477 | /* The drive wants to be written to. */ | |
1478 | if ((ireason & 3) == 0) { | |
1479 | if (!rq->data) { | |
1480 | blk_dump_rq_flags(rq, "cdrom_pc_intr, write"); | |
1481 | goto confused; | |
1482 | } | |
1483 | /* Transfer the data. */ | |
1484 | HWIF(drive)->atapi_output_bytes(drive, rq->data, thislen); | |
1485 | ||
1486 | /* If we haven't moved enough data to satisfy the drive, | |
1487 | add some padding. */ | |
1488 | while (len > thislen) { | |
1489 | int dum = 0; | |
1490 | HWIF(drive)->atapi_output_bytes(drive, &dum, sizeof(dum)); | |
1491 | len -= sizeof(dum); | |
1492 | } | |
1493 | ||
1494 | /* Keep count of how much data we've moved. */ | |
1495 | rq->data += thislen; | |
1496 | rq->data_len -= thislen; | |
1497 | } | |
1498 | ||
1499 | /* Same drill for reading. */ | |
1500 | else if ((ireason & 3) == 2) { | |
1501 | if (!rq->data) { | |
1502 | blk_dump_rq_flags(rq, "cdrom_pc_intr, write"); | |
1503 | goto confused; | |
1504 | } | |
1505 | /* Transfer the data. */ | |
1506 | HWIF(drive)->atapi_input_bytes(drive, rq->data, thislen); | |
1507 | ||
1508 | /* If we haven't moved enough data to satisfy the drive, | |
1509 | add some padding. */ | |
1510 | while (len > thislen) { | |
1511 | int dum = 0; | |
1512 | HWIF(drive)->atapi_input_bytes(drive, &dum, sizeof(dum)); | |
1513 | len -= sizeof(dum); | |
1514 | } | |
1515 | ||
1516 | /* Keep count of how much data we've moved. */ | |
1517 | rq->data += thislen; | |
1518 | rq->data_len -= thislen; | |
1519 | ||
4aff5e23 | 1520 | if (blk_sense_request(rq)) |
1da177e4 LT |
1521 | rq->sense_len += thislen; |
1522 | } else { | |
1523 | confused: | |
1524 | printk (KERN_ERR "%s: cdrom_pc_intr: The drive " | |
1ad55440 RK |
1525 | "appears confused (ireason = 0x%02x). " |
1526 | "Trying to recover by ending request.\n", | |
1da177e4 | 1527 | drive->name, ireason); |
4aff5e23 | 1528 | rq->cmd_flags |= REQ_FAILED; |
1ad55440 RK |
1529 | cdrom_end_request(drive, 0); |
1530 | return ide_stopped; | |
1da177e4 LT |
1531 | } |
1532 | ||
1533 | /* Now we wait for another interrupt. */ | |
1534 | ide_set_handler(drive, &cdrom_pc_intr, ATAPI_WAIT_PC, cdrom_timer_expiry); | |
1535 | return ide_started; | |
1536 | } | |
1537 | ||
1538 | static ide_startstop_t cdrom_do_pc_continuation (ide_drive_t *drive) | |
1539 | { | |
1540 | struct request *rq = HWGROUP(drive)->rq; | |
1541 | ||
1542 | if (!rq->timeout) | |
1543 | rq->timeout = ATAPI_WAIT_PC; | |
1544 | ||
1545 | /* Send the command to the drive and return. */ | |
1546 | return cdrom_transfer_packet_command(drive, rq, &cdrom_pc_intr); | |
1547 | } | |
1548 | ||
1549 | ||
1550 | static ide_startstop_t cdrom_do_packet_command (ide_drive_t *drive) | |
1551 | { | |
1552 | int len; | |
1553 | struct request *rq = HWGROUP(drive)->rq; | |
1554 | struct cdrom_info *info = drive->driver_data; | |
1555 | ||
1556 | info->dma = 0; | |
4aff5e23 | 1557 | rq->cmd_flags &= ~REQ_FAILED; |
1da177e4 LT |
1558 | len = rq->data_len; |
1559 | ||
1560 | /* Start sending the command to the drive. */ | |
1561 | return cdrom_start_packet_command(drive, len, cdrom_do_pc_continuation); | |
1562 | } | |
1563 | ||
1564 | ||
dbe217af | 1565 | static int cdrom_queue_packet_command(ide_drive_t *drive, struct request *rq) |
1da177e4 LT |
1566 | { |
1567 | struct request_sense sense; | |
1568 | int retries = 10; | |
4aff5e23 | 1569 | unsigned int flags = rq->cmd_flags; |
1da177e4 LT |
1570 | |
1571 | if (rq->sense == NULL) | |
1572 | rq->sense = &sense; | |
1573 | ||
1574 | /* Start of retry loop. */ | |
1575 | do { | |
1576 | int error; | |
1577 | unsigned long time = jiffies; | |
4aff5e23 | 1578 | rq->cmd_flags = flags; |
1da177e4 LT |
1579 | |
1580 | error = ide_do_drive_cmd(drive, rq, ide_wait); | |
1581 | time = jiffies - time; | |
1582 | ||
1583 | /* FIXME: we should probably abort/retry or something | |
1584 | * in case of failure */ | |
4aff5e23 | 1585 | if (rq->cmd_flags & REQ_FAILED) { |
1da177e4 LT |
1586 | /* The request failed. Retry if it was due to a unit |
1587 | attention status | |
1588 | (usually means media was changed). */ | |
1589 | struct request_sense *reqbuf = rq->sense; | |
1590 | ||
1591 | if (reqbuf->sense_key == UNIT_ATTENTION) | |
1592 | cdrom_saw_media_change(drive); | |
1593 | else if (reqbuf->sense_key == NOT_READY && | |
1594 | reqbuf->asc == 4 && reqbuf->ascq != 4) { | |
1595 | /* The drive is in the process of loading | |
1596 | a disk. Retry, but wait a little to give | |
1597 | the drive time to complete the load. */ | |
1598 | ssleep(2); | |
1599 | } else { | |
1600 | /* Otherwise, don't retry. */ | |
1601 | retries = 0; | |
1602 | } | |
1603 | --retries; | |
1604 | } | |
1605 | ||
1606 | /* End of retry loop. */ | |
4aff5e23 | 1607 | } while ((rq->cmd_flags & REQ_FAILED) && retries >= 0); |
1da177e4 LT |
1608 | |
1609 | /* Return an error if the command failed. */ | |
4aff5e23 | 1610 | return (rq->cmd_flags & REQ_FAILED) ? -EIO : 0; |
1da177e4 LT |
1611 | } |
1612 | ||
1613 | /* | |
1614 | * Write handling | |
1615 | */ | |
858119e1 | 1616 | static int cdrom_write_check_ireason(ide_drive_t *drive, int len, int ireason) |
1da177e4 LT |
1617 | { |
1618 | /* Two notes about IDE interrupt reason here - 0 means that | |
1619 | * the drive wants to receive data from us, 2 means that | |
1620 | * the drive is expecting to transfer data to us. | |
1621 | */ | |
1622 | if (ireason == 0) | |
1623 | return 0; | |
1624 | else if (ireason == 2) { | |
1625 | /* Whoops... The drive wants to send data. */ | |
1626 | printk(KERN_ERR "%s: write_intr: wrong transfer direction!\n", | |
1627 | drive->name); | |
1628 | ||
1629 | while (len > 0) { | |
1630 | int dum = 0; | |
1631 | HWIF(drive)->atapi_input_bytes(drive, &dum, sizeof(dum)); | |
1632 | len -= sizeof(dum); | |
1633 | } | |
1634 | } else { | |
1635 | /* Drive wants a command packet, or invalid ireason... */ | |
1636 | printk(KERN_ERR "%s: write_intr: bad interrupt reason %x\n", | |
1637 | drive->name, ireason); | |
1638 | } | |
1639 | ||
1640 | cdrom_end_request(drive, 0); | |
1641 | return 1; | |
1642 | } | |
1643 | ||
1644 | static void post_transform_command(struct request *req) | |
1645 | { | |
1646 | u8 *c = req->cmd; | |
1647 | char *ibuf; | |
1648 | ||
1649 | if (!blk_pc_request(req)) | |
1650 | return; | |
1651 | ||
1652 | if (req->bio) | |
1653 | ibuf = bio_data(req->bio); | |
1654 | else | |
1655 | ibuf = req->data; | |
1656 | ||
1657 | if (!ibuf) | |
1658 | return; | |
1659 | ||
1660 | /* | |
1661 | * set ansi-revision and response data as atapi | |
1662 | */ | |
1663 | if (c[0] == GPCMD_INQUIRY) { | |
1664 | ibuf[2] |= 2; | |
1665 | ibuf[3] = (ibuf[3] & 0xf0) | 2; | |
1666 | } | |
1667 | } | |
1668 | ||
1669 | typedef void (xfer_func_t)(ide_drive_t *, void *, u32); | |
1670 | ||
1671 | /* | |
1672 | * best way to deal with dma that is not sector aligned right now... note | |
1673 | * that in this path we are not using ->data or ->buffer at all. this irs | |
1674 | * can replace cdrom_pc_intr, cdrom_read_intr, and cdrom_write_intr in the | |
1675 | * future. | |
1676 | */ | |
1677 | static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) | |
1678 | { | |
1679 | struct cdrom_info *info = drive->driver_data; | |
1680 | struct request *rq = HWGROUP(drive)->rq; | |
1681 | int dma_error, dma, stat, ireason, len, thislen; | |
1682 | u8 lowcyl, highcyl; | |
1683 | xfer_func_t *xferfunc; | |
1684 | unsigned long flags; | |
1685 | ||
1686 | /* Check for errors. */ | |
1687 | dma_error = 0; | |
1688 | dma = info->dma; | |
1689 | if (dma) { | |
1690 | info->dma = 0; | |
1691 | dma_error = HWIF(drive)->ide_dma_end(drive); | |
1692 | } | |
1693 | ||
1694 | if (cdrom_decode_status(drive, 0, &stat)) | |
1695 | return ide_stopped; | |
1696 | ||
1697 | /* | |
1698 | * using dma, transfer is complete now | |
1699 | */ | |
1700 | if (dma) { | |
1701 | if (dma_error) { | |
1702 | printk(KERN_ERR "ide-cd: dma error\n"); | |
1703 | __ide_dma_off(drive); | |
1704 | return ide_error(drive, "dma error", stat); | |
1705 | } | |
1706 | ||
1707 | end_that_request_chunk(rq, 1, rq->data_len); | |
1708 | rq->data_len = 0; | |
1709 | goto end_request; | |
1710 | } | |
1711 | ||
1712 | /* | |
1713 | * ok we fall to pio :/ | |
1714 | */ | |
1715 | ireason = HWIF(drive)->INB(IDE_IREASON_REG) & 0x3; | |
1716 | lowcyl = HWIF(drive)->INB(IDE_BCOUNTL_REG); | |
1717 | highcyl = HWIF(drive)->INB(IDE_BCOUNTH_REG); | |
1718 | ||
1719 | len = lowcyl + (256 * highcyl); | |
1720 | thislen = rq->data_len; | |
1721 | if (thislen > len) | |
1722 | thislen = len; | |
1723 | ||
1724 | /* | |
1725 | * If DRQ is clear, the command has completed. | |
1726 | */ | |
1727 | if ((stat & DRQ_STAT) == 0) | |
1728 | goto end_request; | |
1729 | ||
1730 | /* | |
1731 | * check which way to transfer data | |
1732 | */ | |
1733 | if (rq_data_dir(rq) == WRITE) { | |
1734 | /* | |
1735 | * write to drive | |
1736 | */ | |
1737 | if (cdrom_write_check_ireason(drive, len, ireason)) | |
1738 | return ide_stopped; | |
1739 | ||
1740 | xferfunc = HWIF(drive)->atapi_output_bytes; | |
1741 | } else { | |
1742 | /* | |
1743 | * read from drive | |
1744 | */ | |
1745 | if (cdrom_read_check_ireason(drive, len, ireason)) | |
1746 | return ide_stopped; | |
1747 | ||
1748 | xferfunc = HWIF(drive)->atapi_input_bytes; | |
1749 | } | |
1750 | ||
1751 | /* | |
1752 | * transfer data | |
1753 | */ | |
1754 | while (thislen > 0) { | |
1755 | int blen = blen = rq->data_len; | |
1756 | char *ptr = rq->data; | |
1757 | ||
1758 | /* | |
1759 | * bio backed? | |
1760 | */ | |
1761 | if (rq->bio) { | |
1762 | ptr = bio_data(rq->bio); | |
1763 | blen = bio_iovec(rq->bio)->bv_len; | |
1764 | } | |
1765 | ||
1766 | if (!ptr) { | |
1767 | printk(KERN_ERR "%s: confused, missing data\n", drive->name); | |
1768 | break; | |
1769 | } | |
1770 | ||
1771 | if (blen > thislen) | |
1772 | blen = thislen; | |
1773 | ||
1774 | xferfunc(drive, ptr, blen); | |
1775 | ||
1776 | thislen -= blen; | |
1777 | len -= blen; | |
1778 | rq->data_len -= blen; | |
1779 | ||
1780 | if (rq->bio) | |
1781 | end_that_request_chunk(rq, 1, blen); | |
1782 | else | |
1783 | rq->data += blen; | |
1784 | } | |
1785 | ||
1786 | /* | |
1787 | * pad, if necessary | |
1788 | */ | |
1789 | if (len > 0) { | |
1790 | while (len > 0) { | |
1791 | int pad = 0; | |
1792 | ||
1793 | xferfunc(drive, &pad, sizeof(pad)); | |
1794 | len -= sizeof(pad); | |
1795 | } | |
1796 | } | |
1797 | ||
125e1874 | 1798 | BUG_ON(HWGROUP(drive)->handler != NULL); |
1da177e4 LT |
1799 | |
1800 | ide_set_handler(drive, cdrom_newpc_intr, rq->timeout, NULL); | |
1801 | return ide_started; | |
1802 | ||
1803 | end_request: | |
1804 | if (!rq->data_len) | |
1805 | post_transform_command(rq); | |
1806 | ||
1807 | spin_lock_irqsave(&ide_lock, flags); | |
1808 | blkdev_dequeue_request(rq); | |
8ffdc655 | 1809 | end_that_request_last(rq, 1); |
1da177e4 LT |
1810 | HWGROUP(drive)->rq = NULL; |
1811 | spin_unlock_irqrestore(&ide_lock, flags); | |
1812 | return ide_stopped; | |
1813 | } | |
1814 | ||
1815 | static ide_startstop_t cdrom_write_intr(ide_drive_t *drive) | |
1816 | { | |
1817 | int stat, ireason, len, sectors_to_transfer, uptodate; | |
1818 | struct cdrom_info *info = drive->driver_data; | |
1819 | int dma_error = 0, dma = info->dma; | |
1820 | u8 lowcyl = 0, highcyl = 0; | |
1821 | ||
1822 | struct request *rq = HWGROUP(drive)->rq; | |
1823 | ||
1824 | /* Check for errors. */ | |
1825 | if (dma) { | |
1826 | info->dma = 0; | |
1827 | if ((dma_error = HWIF(drive)->ide_dma_end(drive))) { | |
1828 | printk(KERN_ERR "ide-cd: write dma error\n"); | |
1829 | __ide_dma_off(drive); | |
1830 | } | |
1831 | } | |
1832 | ||
1833 | if (cdrom_decode_status(drive, 0, &stat)) | |
1834 | return ide_stopped; | |
1835 | ||
1836 | /* | |
1837 | * using dma, transfer is complete now | |
1838 | */ | |
1839 | if (dma) { | |
1840 | if (dma_error) | |
1841 | return ide_error(drive, "dma error", stat); | |
1842 | ||
1843 | ide_end_request(drive, 1, rq->nr_sectors); | |
1844 | return ide_stopped; | |
1845 | } | |
1846 | ||
1847 | /* Read the interrupt reason and the transfer length. */ | |
1848 | ireason = HWIF(drive)->INB(IDE_IREASON_REG); | |
1849 | lowcyl = HWIF(drive)->INB(IDE_BCOUNTL_REG); | |
1850 | highcyl = HWIF(drive)->INB(IDE_BCOUNTH_REG); | |
1851 | ||
1852 | len = lowcyl + (256 * highcyl); | |
1853 | ||
1854 | /* If DRQ is clear, the command has completed. */ | |
1855 | if ((stat & DRQ_STAT) == 0) { | |
1856 | /* If we're not done writing, complain. | |
1857 | * Otherwise, complete the command normally. | |
1858 | */ | |
1859 | uptodate = 1; | |
1860 | if (rq->current_nr_sectors > 0) { | |
1861 | printk(KERN_ERR "%s: write_intr: data underrun (%d blocks)\n", | |
1862 | drive->name, rq->current_nr_sectors); | |
1863 | uptodate = 0; | |
1864 | } | |
1865 | cdrom_end_request(drive, uptodate); | |
1866 | return ide_stopped; | |
1867 | } | |
1868 | ||
1869 | /* Check that the drive is expecting to do the same thing we are. */ | |
1870 | if (cdrom_write_check_ireason(drive, len, ireason)) | |
1871 | return ide_stopped; | |
1872 | ||
1873 | sectors_to_transfer = len / SECTOR_SIZE; | |
1874 | ||
1875 | /* | |
1876 | * now loop and write out the data | |
1877 | */ | |
1878 | while (sectors_to_transfer > 0) { | |
1879 | int this_transfer; | |
1880 | ||
1881 | if (!rq->current_nr_sectors) { | |
1882 | printk(KERN_ERR "ide-cd: write_intr: oops\n"); | |
1883 | break; | |
1884 | } | |
1885 | ||
1886 | /* | |
1887 | * Figure out how many sectors we can transfer | |
1888 | */ | |
1889 | this_transfer = min_t(int, sectors_to_transfer, rq->current_nr_sectors); | |
1890 | ||
1891 | while (this_transfer > 0) { | |
1892 | HWIF(drive)->atapi_output_bytes(drive, rq->buffer, SECTOR_SIZE); | |
1893 | rq->buffer += SECTOR_SIZE; | |
1894 | --rq->nr_sectors; | |
1895 | --rq->current_nr_sectors; | |
1896 | ++rq->sector; | |
1897 | --this_transfer; | |
1898 | --sectors_to_transfer; | |
1899 | } | |
1900 | ||
1901 | /* | |
1902 | * current buffer complete, move on | |
1903 | */ | |
1904 | if (rq->current_nr_sectors == 0 && rq->nr_sectors) | |
1905 | cdrom_end_request(drive, 1); | |
1906 | } | |
1907 | ||
1908 | /* re-arm handler */ | |
1909 | ide_set_handler(drive, &cdrom_write_intr, ATAPI_WAIT_PC, NULL); | |
1910 | return ide_started; | |
1911 | } | |
1912 | ||
1913 | static ide_startstop_t cdrom_start_write_cont(ide_drive_t *drive) | |
1914 | { | |
1915 | struct request *rq = HWGROUP(drive)->rq; | |
1916 | ||
1917 | #if 0 /* the immediate bit */ | |
1918 | rq->cmd[1] = 1 << 3; | |
1919 | #endif | |
1920 | rq->timeout = ATAPI_WAIT_PC; | |
1921 | ||
1922 | return cdrom_transfer_packet_command(drive, rq, cdrom_write_intr); | |
1923 | } | |
1924 | ||
1925 | static ide_startstop_t cdrom_start_write(ide_drive_t *drive, struct request *rq) | |
1926 | { | |
1927 | struct cdrom_info *info = drive->driver_data; | |
1928 | struct gendisk *g = info->disk; | |
1929 | unsigned short sectors_per_frame = queue_hardsect_size(drive->queue) >> SECTOR_BITS; | |
1930 | ||
1931 | /* | |
1932 | * writes *must* be hardware frame aligned | |
1933 | */ | |
1934 | if ((rq->nr_sectors & (sectors_per_frame - 1)) || | |
1935 | (rq->sector & (sectors_per_frame - 1))) { | |
1936 | cdrom_end_request(drive, 0); | |
1937 | return ide_stopped; | |
1938 | } | |
1939 | ||
1940 | /* | |
1941 | * disk has become write protected | |
1942 | */ | |
1943 | if (g->policy) { | |
1944 | cdrom_end_request(drive, 0); | |
1945 | return ide_stopped; | |
1946 | } | |
1947 | ||
1da177e4 LT |
1948 | info->nsectors_buffered = 0; |
1949 | ||
1950 | /* use dma, if possible. we don't need to check more, since we | |
1951 | * know that the transfer is always (at least!) frame aligned */ | |
1952 | info->dma = drive->using_dma ? 1 : 0; | |
1da177e4 LT |
1953 | |
1954 | info->devinfo.media_written = 1; | |
1955 | ||
1956 | /* Start sending the write request to the drive. */ | |
1957 | return cdrom_start_packet_command(drive, 32768, cdrom_start_write_cont); | |
1958 | } | |
1959 | ||
1960 | static ide_startstop_t cdrom_do_newpc_cont(ide_drive_t *drive) | |
1961 | { | |
1962 | struct request *rq = HWGROUP(drive)->rq; | |
1963 | ||
1964 | if (!rq->timeout) | |
1965 | rq->timeout = ATAPI_WAIT_PC; | |
1966 | ||
1967 | return cdrom_transfer_packet_command(drive, rq, cdrom_newpc_intr); | |
1968 | } | |
1969 | ||
1970 | static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) | |
1971 | { | |
1972 | struct cdrom_info *info = drive->driver_data; | |
1973 | ||
4aff5e23 | 1974 | rq->cmd_flags |= REQ_QUIET; |
1da177e4 LT |
1975 | |
1976 | info->dma = 0; | |
1da177e4 LT |
1977 | |
1978 | /* | |
1979 | * sg request | |
1980 | */ | |
1981 | if (rq->bio) { | |
1982 | int mask = drive->queue->dma_alignment; | |
1983 | unsigned long addr = (unsigned long) page_address(bio_page(rq->bio)); | |
1984 | ||
1da177e4 LT |
1985 | info->dma = drive->using_dma; |
1986 | ||
1987 | /* | |
1988 | * check if dma is safe | |
5d9e4ea5 LT |
1989 | * |
1990 | * NOTE! The "len" and "addr" checks should possibly have | |
1991 | * separate masks. | |
1da177e4 | 1992 | */ |
4e7c6816 | 1993 | if ((rq->data_len & 15) || (addr & mask)) |
1da177e4 LT |
1994 | info->dma = 0; |
1995 | } | |
1996 | ||
1997 | /* Start sending the command to the drive. */ | |
1998 | return cdrom_start_packet_command(drive, rq->data_len, cdrom_do_newpc_cont); | |
1999 | } | |
2000 | ||
2001 | /**************************************************************************** | |
2002 | * cdrom driver request routine. | |
2003 | */ | |
2004 | static ide_startstop_t | |
2005 | ide_do_rw_cdrom (ide_drive_t *drive, struct request *rq, sector_t block) | |
2006 | { | |
2007 | ide_startstop_t action; | |
2008 | struct cdrom_info *info = drive->driver_data; | |
2009 | ||
2010 | if (blk_fs_request(rq)) { | |
2011 | if (CDROM_CONFIG_FLAGS(drive)->seeking) { | |
2012 | unsigned long elapsed = jiffies - info->start_seek; | |
2013 | int stat = HWIF(drive)->INB(IDE_STATUS_REG); | |
2014 | ||
2015 | if ((stat & SEEK_STAT) != SEEK_STAT) { | |
2016 | if (elapsed < IDECD_SEEK_TIMEOUT) { | |
2017 | ide_stall_queue(drive, IDECD_SEEK_TIMER); | |
2018 | return ide_stopped; | |
2019 | } | |
2020 | printk (KERN_ERR "%s: DSC timeout\n", drive->name); | |
2021 | } | |
2022 | CDROM_CONFIG_FLAGS(drive)->seeking = 0; | |
2023 | } | |
2024 | if ((rq_data_dir(rq) == READ) && IDE_LARGE_SEEK(info->last_block, block, IDECD_SEEK_THRESHOLD) && drive->dsc_overlap) { | |
2025 | action = cdrom_start_seek(drive, block); | |
2026 | } else { | |
2027 | if (rq_data_dir(rq) == READ) | |
2028 | action = cdrom_start_read(drive, block); | |
2029 | else | |
2030 | action = cdrom_start_write(drive, rq); | |
2031 | } | |
2032 | info->last_block = block; | |
2033 | return action; | |
cea2885a JA |
2034 | } else if (rq->cmd_type == REQ_TYPE_SENSE || |
2035 | rq->cmd_type == REQ_TYPE_ATA_PC) { | |
1da177e4 | 2036 | return cdrom_do_packet_command(drive); |
4aff5e23 | 2037 | } else if (blk_pc_request(rq)) { |
1da177e4 | 2038 | return cdrom_do_block_pc(drive, rq); |
4aff5e23 | 2039 | } else if (blk_special_request(rq)) { |
1da177e4 LT |
2040 | /* |
2041 | * right now this can only be a reset... | |
2042 | */ | |
2043 | cdrom_end_request(drive, 1); | |
2044 | return ide_stopped; | |
2045 | } | |
2046 | ||
2047 | blk_dump_rq_flags(rq, "ide-cd bad flags"); | |
2048 | cdrom_end_request(drive, 0); | |
2049 | return ide_stopped; | |
2050 | } | |
2051 | ||
2052 | ||
2053 | ||
2054 | /**************************************************************************** | |
2055 | * Ioctl handling. | |
2056 | * | |
2057 | * Routines which queue packet commands take as a final argument a pointer | |
2058 | * to a request_sense struct. If execution of the command results | |
2059 | * in an error with a CHECK CONDITION status, this structure will be filled | |
2060 | * with the results of the subsequent request sense command. The pointer | |
2061 | * can also be NULL, in which case no sense information is returned. | |
2062 | */ | |
2063 | ||
2064 | #if ! STANDARD_ATAPI | |
2065 | static inline | |
2066 | int bin2bcd (int x) | |
2067 | { | |
2068 | return (x%10) | ((x/10) << 4); | |
2069 | } | |
2070 | ||
2071 | ||
2072 | static inline | |
2073 | int bcd2bin (int x) | |
2074 | { | |
2075 | return (x >> 4) * 10 + (x & 0x0f); | |
2076 | } | |
2077 | ||
2078 | static | |
2079 | void msf_from_bcd (struct atapi_msf *msf) | |
2080 | { | |
2081 | msf->minute = bcd2bin (msf->minute); | |
2082 | msf->second = bcd2bin (msf->second); | |
2083 | msf->frame = bcd2bin (msf->frame); | |
2084 | } | |
2085 | ||
2086 | #endif /* not STANDARD_ATAPI */ | |
2087 | ||
2088 | ||
2089 | static inline | |
2090 | void lba_to_msf (int lba, byte *m, byte *s, byte *f) | |
2091 | { | |
2092 | lba += CD_MSF_OFFSET; | |
2093 | lba &= 0xffffff; /* negative lbas use only 24 bits */ | |
2094 | *m = lba / (CD_SECS * CD_FRAMES); | |
2095 | lba %= (CD_SECS * CD_FRAMES); | |
2096 | *s = lba / CD_FRAMES; | |
2097 | *f = lba % CD_FRAMES; | |
2098 | } | |
2099 | ||
2100 | ||
2101 | static inline | |
2102 | int msf_to_lba (byte m, byte s, byte f) | |
2103 | { | |
2104 | return (((m * CD_SECS) + s) * CD_FRAMES + f) - CD_MSF_OFFSET; | |
2105 | } | |
2106 | ||
2107 | static int cdrom_check_status(ide_drive_t *drive, struct request_sense *sense) | |
2108 | { | |
2109 | struct request req; | |
2110 | struct cdrom_info *info = drive->driver_data; | |
2111 | struct cdrom_device_info *cdi = &info->devinfo; | |
2112 | ||
2113 | cdrom_prepare_request(drive, &req); | |
2114 | ||
2115 | req.sense = sense; | |
2116 | req.cmd[0] = GPCMD_TEST_UNIT_READY; | |
4aff5e23 | 2117 | req.cmd_flags |= REQ_QUIET; |
1da177e4 LT |
2118 | |
2119 | #if ! STANDARD_ATAPI | |
2120 | /* the Sanyo 3 CD changer uses byte 7 of TEST_UNIT_READY to | |
2121 | switch CDs instead of supporting the LOAD_UNLOAD opcode */ | |
2122 | ||
2123 | req.cmd[7] = cdi->sanyo_slot % 3; | |
2124 | #endif /* not STANDARD_ATAPI */ | |
2125 | ||
2126 | return cdrom_queue_packet_command(drive, &req); | |
2127 | } | |
2128 | ||
2129 | ||
2130 | /* Lock the door if LOCKFLAG is nonzero; unlock it otherwise. */ | |
2131 | static int | |
2132 | cdrom_lockdoor(ide_drive_t *drive, int lockflag, struct request_sense *sense) | |
2133 | { | |
2134 | struct request_sense my_sense; | |
2135 | struct request req; | |
2136 | int stat; | |
2137 | ||
2138 | if (sense == NULL) | |
2139 | sense = &my_sense; | |
2140 | ||
2141 | /* If the drive cannot lock the door, just pretend. */ | |
2142 | if (CDROM_CONFIG_FLAGS(drive)->no_doorlock) { | |
2143 | stat = 0; | |
2144 | } else { | |
2145 | cdrom_prepare_request(drive, &req); | |
2146 | req.sense = sense; | |
2147 | req.cmd[0] = GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL; | |
2148 | req.cmd[4] = lockflag ? 1 : 0; | |
2149 | stat = cdrom_queue_packet_command(drive, &req); | |
2150 | } | |
2151 | ||
2152 | /* If we got an illegal field error, the drive | |
2153 | probably cannot lock the door. */ | |
2154 | if (stat != 0 && | |
2155 | sense->sense_key == ILLEGAL_REQUEST && | |
2156 | (sense->asc == 0x24 || sense->asc == 0x20)) { | |
2157 | printk (KERN_ERR "%s: door locking not supported\n", | |
2158 | drive->name); | |
2159 | CDROM_CONFIG_FLAGS(drive)->no_doorlock = 1; | |
2160 | stat = 0; | |
2161 | } | |
2162 | ||
2163 | /* no medium, that's alright. */ | |
2164 | if (stat != 0 && sense->sense_key == NOT_READY && sense->asc == 0x3a) | |
2165 | stat = 0; | |
2166 | ||
2167 | if (stat == 0) | |
2168 | CDROM_STATE_FLAGS(drive)->door_locked = lockflag; | |
2169 | ||
2170 | return stat; | |
2171 | } | |
2172 | ||
2173 | ||
2174 | /* Eject the disk if EJECTFLAG is 0. | |
2175 | If EJECTFLAG is 1, try to reload the disk. */ | |
2176 | static int cdrom_eject(ide_drive_t *drive, int ejectflag, | |
2177 | struct request_sense *sense) | |
2178 | { | |
2179 | struct request req; | |
2180 | char loej = 0x02; | |
2181 | ||
2182 | if (CDROM_CONFIG_FLAGS(drive)->no_eject && !ejectflag) | |
2183 | return -EDRIVE_CANT_DO_THIS; | |
2184 | ||
2185 | /* reload fails on some drives, if the tray is locked */ | |
2186 | if (CDROM_STATE_FLAGS(drive)->door_locked && ejectflag) | |
2187 | return 0; | |
2188 | ||
2189 | cdrom_prepare_request(drive, &req); | |
2190 | ||
2191 | /* only tell drive to close tray if open, if it can do that */ | |
2192 | if (ejectflag && !CDROM_CONFIG_FLAGS(drive)->close_tray) | |
2193 | loej = 0; | |
2194 | ||
2195 | req.sense = sense; | |
2196 | req.cmd[0] = GPCMD_START_STOP_UNIT; | |
2197 | req.cmd[4] = loej | (ejectflag != 0); | |
2198 | return cdrom_queue_packet_command(drive, &req); | |
2199 | } | |
2200 | ||
2201 | static int cdrom_read_capacity(ide_drive_t *drive, unsigned long *capacity, | |
2202 | unsigned long *sectors_per_frame, | |
2203 | struct request_sense *sense) | |
2204 | { | |
2205 | struct { | |
2206 | __u32 lba; | |
2207 | __u32 blocklen; | |
2208 | } capbuf; | |
2209 | ||
2210 | int stat; | |
2211 | struct request req; | |
2212 | ||
2213 | cdrom_prepare_request(drive, &req); | |
2214 | ||
2215 | req.sense = sense; | |
2216 | req.cmd[0] = GPCMD_READ_CDVD_CAPACITY; | |
2217 | req.data = (char *)&capbuf; | |
2218 | req.data_len = sizeof(capbuf); | |
4aff5e23 | 2219 | req.cmd_flags |= REQ_QUIET; |
1da177e4 LT |
2220 | |
2221 | stat = cdrom_queue_packet_command(drive, &req); | |
2222 | if (stat == 0) { | |
2223 | *capacity = 1 + be32_to_cpu(capbuf.lba); | |
2224 | *sectors_per_frame = | |
2225 | be32_to_cpu(capbuf.blocklen) >> SECTOR_BITS; | |
2226 | } | |
2227 | ||
2228 | return stat; | |
2229 | } | |
2230 | ||
2231 | static int cdrom_read_tocentry(ide_drive_t *drive, int trackno, int msf_flag, | |
2232 | int format, char *buf, int buflen, | |
2233 | struct request_sense *sense) | |
2234 | { | |
2235 | struct request req; | |
2236 | ||
2237 | cdrom_prepare_request(drive, &req); | |
2238 | ||
2239 | req.sense = sense; | |
2240 | req.data = buf; | |
2241 | req.data_len = buflen; | |
4aff5e23 | 2242 | req.cmd_flags |= REQ_QUIET; |
1da177e4 LT |
2243 | req.cmd[0] = GPCMD_READ_TOC_PMA_ATIP; |
2244 | req.cmd[6] = trackno; | |
2245 | req.cmd[7] = (buflen >> 8); | |
2246 | req.cmd[8] = (buflen & 0xff); | |
2247 | req.cmd[9] = (format << 6); | |
2248 | ||
2249 | if (msf_flag) | |
2250 | req.cmd[1] = 2; | |
2251 | ||
2252 | return cdrom_queue_packet_command(drive, &req); | |
2253 | } | |
2254 | ||
2255 | ||
2256 | /* Try to read the entire TOC for the disk into our internal buffer. */ | |
2257 | static int cdrom_read_toc(ide_drive_t *drive, struct request_sense *sense) | |
2258 | { | |
2259 | int stat, ntracks, i; | |
2260 | struct cdrom_info *info = drive->driver_data; | |
2261 | struct cdrom_device_info *cdi = &info->devinfo; | |
2262 | struct atapi_toc *toc = info->toc; | |
2263 | struct { | |
2264 | struct atapi_toc_header hdr; | |
2265 | struct atapi_toc_entry ent; | |
2266 | } ms_tmp; | |
2267 | long last_written; | |
2268 | unsigned long sectors_per_frame = SECTORS_PER_FRAME; | |
2269 | ||
2270 | if (toc == NULL) { | |
2271 | /* Try to allocate space. */ | |
2a91f3e5 | 2272 | toc = kmalloc(sizeof(struct atapi_toc), GFP_KERNEL); |
1da177e4 LT |
2273 | if (toc == NULL) { |
2274 | printk (KERN_ERR "%s: No cdrom TOC buffer!\n", drive->name); | |
2275 | return -ENOMEM; | |
2276 | } | |
2a91f3e5 | 2277 | info->toc = toc; |
1da177e4 LT |
2278 | } |
2279 | ||
2280 | /* Check to see if the existing data is still valid. | |
2281 | If it is, just return. */ | |
2282 | (void) cdrom_check_status(drive, sense); | |
2283 | ||
2284 | if (CDROM_STATE_FLAGS(drive)->toc_valid) | |
2285 | return 0; | |
2286 | ||
2287 | /* Try to get the total cdrom capacity and sector size. */ | |
2288 | stat = cdrom_read_capacity(drive, &toc->capacity, §ors_per_frame, | |
2289 | sense); | |
2290 | if (stat) | |
2291 | toc->capacity = 0x1fffff; | |
2292 | ||
2293 | set_capacity(info->disk, toc->capacity * sectors_per_frame); | |
dbe217af AC |
2294 | /* Save a private copy of te TOC capacity for error handling */ |
2295 | drive->probed_capacity = toc->capacity * sectors_per_frame; | |
2296 | ||
1da177e4 LT |
2297 | blk_queue_hardsect_size(drive->queue, |
2298 | sectors_per_frame << SECTOR_BITS); | |
2299 | ||
2300 | /* First read just the header, so we know how long the TOC is. */ | |
2301 | stat = cdrom_read_tocentry(drive, 0, 1, 0, (char *) &toc->hdr, | |
2302 | sizeof(struct atapi_toc_header), sense); | |
2a91f3e5 JJ |
2303 | if (stat) |
2304 | return stat; | |
1da177e4 LT |
2305 | |
2306 | #if ! STANDARD_ATAPI | |
2307 | if (CDROM_CONFIG_FLAGS(drive)->toctracks_as_bcd) { | |
2308 | toc->hdr.first_track = bcd2bin(toc->hdr.first_track); | |
2309 | toc->hdr.last_track = bcd2bin(toc->hdr.last_track); | |
2310 | } | |
2311 | #endif /* not STANDARD_ATAPI */ | |
2312 | ||
2313 | ntracks = toc->hdr.last_track - toc->hdr.first_track + 1; | |
2314 | if (ntracks <= 0) | |
2315 | return -EIO; | |
2316 | if (ntracks > MAX_TRACKS) | |
2317 | ntracks = MAX_TRACKS; | |
2318 | ||
2319 | /* Now read the whole schmeer. */ | |
2320 | stat = cdrom_read_tocentry(drive, toc->hdr.first_track, 1, 0, | |
2321 | (char *)&toc->hdr, | |
2322 | sizeof(struct atapi_toc_header) + | |
2323 | (ntracks + 1) * | |
2324 | sizeof(struct atapi_toc_entry), sense); | |
2325 | ||
2326 | if (stat && toc->hdr.first_track > 1) { | |
2327 | /* Cds with CDI tracks only don't have any TOC entries, | |
2328 | despite of this the returned values are | |
2329 | first_track == last_track = number of CDI tracks + 1, | |
2330 | so that this case is indistinguishable from the same | |
2331 | layout plus an additional audio track. | |
2332 | If we get an error for the regular case, we assume | |
2333 | a CDI without additional audio tracks. In this case | |
2334 | the readable TOC is empty (CDI tracks are not included) |