ide: rework the code for selecting the best DMA transfer mode (v3)
[deliverable/linux.git] / drivers / ide / pci / hpt34x.c
CommitLineData
1da177e4
LT
1/*
2 * linux/drivers/ide/pci/hpt34x.c Version 0.40 Sept 10, 2002
3 *
4 * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
5 * May be copied or modified under the terms of the GNU General Public License
6 *
7 *
8 * 00:12.0 Unknown mass storage controller:
9 * Triones Technologies, Inc.
10 * Unknown device 0003 (rev 01)
11 *
12 * hde: UDMA 2 (0x0000 0x0002) (0x0000 0x0010)
13 * hdf: UDMA 2 (0x0002 0x0012) (0x0010 0x0030)
14 * hde: DMA 2 (0x0000 0x0002) (0x0000 0x0010)
15 * hdf: DMA 2 (0x0002 0x0012) (0x0010 0x0030)
16 * hdg: DMA 1 (0x0012 0x0052) (0x0030 0x0070)
17 * hdh: DMA 1 (0x0052 0x0252) (0x0070 0x00f0)
18 *
19 * ide-pci.c reference
20 *
21 * Since there are two cards that report almost identically,
22 * the only discernable difference is the values reported in pcicmd.
23 * Booting-BIOS card or HPT363 :: pcicmd == 0x07
24 * Non-bootable card or HPT343 :: pcicmd == 0x05
25 */
26
1da177e4
LT
27#include <linux/module.h>
28#include <linux/types.h>
29#include <linux/kernel.h>
30#include <linux/delay.h>
31#include <linux/timer.h>
32#include <linux/mm.h>
33#include <linux/ioport.h>
34#include <linux/blkdev.h>
35#include <linux/hdreg.h>
36#include <linux/interrupt.h>
37#include <linux/pci.h>
38#include <linux/init.h>
39#include <linux/ide.h>
40
41#include <asm/io.h>
42#include <asm/irq.h>
43
44#define HPT343_DEBUG_DRIVE_INFO 0
45
1da177e4
LT
46static int hpt34x_tune_chipset (ide_drive_t *drive, u8 xferspeed)
47{
48 struct pci_dev *dev = HWIF(drive)->pci_dev;
2d5eaa6d 49 u8 speed = ide_rate_filter(drive, xferspeed);
1da177e4
LT
50 u32 reg1= 0, tmp1 = 0, reg2 = 0, tmp2 = 0;
51 u8 hi_speed, lo_speed;
52
53 hi_speed = speed >> 4;
54 lo_speed = speed & 0x0f;
55
56 if (hi_speed & 7) {
57 hi_speed = (hi_speed & 4) ? 0x01 : 0x10;
58 } else {
59 lo_speed <<= 5;
60 lo_speed >>= 5;
61 }
62
63 pci_read_config_dword(dev, 0x44, &reg1);
64 pci_read_config_dword(dev, 0x48, &reg2);
65 tmp1 = ((lo_speed << (3*drive->dn)) | (reg1 & ~(7 << (3*drive->dn))));
296d9bcc 66 tmp2 = ((hi_speed << drive->dn) | (reg2 & ~(0x11 << drive->dn)));
1da177e4
LT
67 pci_write_config_dword(dev, 0x44, tmp1);
68 pci_write_config_dword(dev, 0x48, tmp2);
69
70#if HPT343_DEBUG_DRIVE_INFO
71 printk("%s: %s drive%d (0x%04x 0x%04x) (0x%04x 0x%04x)" \
72 " (0x%02x 0x%02x)\n",
73 drive->name, ide_xfer_verbose(speed),
74 drive->dn, reg1, tmp1, reg2, tmp2,
75 hi_speed, lo_speed);
76#endif /* HPT343_DEBUG_DRIVE_INFO */
77
78 return(ide_config_drive_speed(drive, speed));
79}
80
81static void hpt34x_tune_drive (ide_drive_t *drive, u8 pio)
82{
83 pio = ide_get_best_pio_mode(drive, pio, 5, NULL);
1da177e4
LT
84 (void) hpt34x_tune_chipset(drive, (XFER_PIO_0 + pio));
85}
86
87/*
88 * This allows the configuration of ide_pci chipset registers
89 * for cards that learn about the drive's UDMA, DMA, PIO capabilities
90 * after the drive is reported by the OS. Initially for designed for
91 * HPT343 UDMA chipset by HighPoint|Triones Technologies, Inc.
92 */
93
94static int config_chipset_for_dma (ide_drive_t *drive)
95{
2d5eaa6d 96 u8 speed = ide_max_dma_mode(drive);
1da177e4
LT
97
98 if (!(speed))
99 return 0;
100
1da177e4
LT
101 (void) hpt34x_tune_chipset(drive, speed);
102 return ide_dma_enable(drive);
103}
104
105static int hpt34x_config_drive_xfer_rate (ide_drive_t *drive)
106{
1da177e4
LT
107 drive->init_speed = 0;
108
7569e8dc 109 if (ide_use_dma(drive) && config_chipset_for_dma(drive))
1da177e4 110#ifndef CONFIG_HPT34X_AUTODMA
3608b5d7 111 return -1;
1da177e4 112#else
3608b5d7 113 return 0;
1da177e4 114#endif
1da177e4 115
d8f4469d 116 if (ide_use_fast_pio(drive))
1da177e4 117 hpt34x_tune_drive(drive, 255);
d8f4469d 118
3608b5d7 119 return -1;
1da177e4
LT
120}
121
122/*
123 * If the BIOS does not set the IO base addaress to XX00, 343 will fail.
124 */
125#define HPT34X_PCI_INIT_REG 0x80
126
127static unsigned int __devinit init_chipset_hpt34x(struct pci_dev *dev, const char *name)
128{
129 int i = 0;
130 unsigned long hpt34xIoBase = pci_resource_start(dev, 4);
131 unsigned long hpt_addr[4] = { 0x20, 0x34, 0x28, 0x3c };
132 unsigned long hpt_addr_len[4] = { 7, 3, 7, 3 };
133 u16 cmd;
134 unsigned long flags;
135
136 local_irq_save(flags);
137
138 pci_write_config_byte(dev, HPT34X_PCI_INIT_REG, 0x00);
139 pci_read_config_word(dev, PCI_COMMAND, &cmd);
140
141 if (cmd & PCI_COMMAND_MEMORY) {
142 if (pci_resource_start(dev, PCI_ROM_RESOURCE)) {
299cc3c1 143 pci_write_config_dword(dev, PCI_ROM_ADDRESS,
1da177e4
LT
144 dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE);
145 printk(KERN_INFO "HPT345: ROM enabled at 0x%08lx\n",
08f46de9 146 (unsigned long)dev->resource[PCI_ROM_RESOURCE].start);
1da177e4
LT
147 }
148 pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xF0);
149 } else {
150 pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20);
151 }
152
153 /*
154 * Since 20-23 can be assigned and are R/W, we correct them.
155 */
156 pci_write_config_word(dev, PCI_COMMAND, cmd & ~PCI_COMMAND_IO);
157 for(i=0; i<4; i++) {
158 dev->resource[i].start = (hpt34xIoBase + hpt_addr[i]);
159 dev->resource[i].end = dev->resource[i].start + hpt_addr_len[i];
160 dev->resource[i].flags = IORESOURCE_IO;
161 pci_write_config_dword(dev,
162 (PCI_BASE_ADDRESS_0 + (i * 4)),
163 dev->resource[i].start);
164 }
165 pci_write_config_word(dev, PCI_COMMAND, cmd);
166
167 local_irq_restore(flags);
168
169 return dev->irq;
170}
171
172static void __devinit init_hwif_hpt34x(ide_hwif_t *hwif)
173{
174 u16 pcicmd = 0;
175
176 hwif->autodma = 0;
177
178 hwif->tuneproc = &hpt34x_tune_drive;
179 hwif->speedproc = &hpt34x_tune_chipset;
1da177e4
LT
180 hwif->drives[0].autotune = 1;
181 hwif->drives[1].autotune = 1;
182
183 pci_read_config_word(hwif->pci_dev, PCI_COMMAND, &pcicmd);
184
185 if (!hwif->dma_base)
186 return;
187
188 hwif->ultra_mask = 0x07;
189 hwif->mwdma_mask = 0x07;
190 hwif->swdma_mask = 0x07;
191
192 hwif->ide_dma_check = &hpt34x_config_drive_xfer_rate;
193 if (!noautodma)
194 hwif->autodma = (pcicmd & PCI_COMMAND_MEMORY) ? 1 : 0;
195 hwif->drives[0].autodma = hwif->autodma;
196 hwif->drives[1].autodma = hwif->autodma;
197}
198
199static ide_pci_device_t hpt34x_chipset __devinitdata = {
200 .name = "HPT34X",
201 .init_chipset = init_chipset_hpt34x,
202 .init_hwif = init_hwif_hpt34x,
203 .channels = 2,
204 .autodma = NOAUTODMA,
205 .bootable = NEVER_BOARD,
206 .extra = 16
207};
208
209static int __devinit hpt34x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
210{
211 ide_pci_device_t *d = &hpt34x_chipset;
212 static char *chipset_names[] = {"HPT343", "HPT345"};
213 u16 pcicmd = 0;
214
215 pci_read_config_word(dev, PCI_COMMAND, &pcicmd);
216
217 d->name = chipset_names[(pcicmd & PCI_COMMAND_MEMORY) ? 1 : 0];
218 d->bootable = (pcicmd & PCI_COMMAND_MEMORY) ? OFF_BOARD : NEVER_BOARD;
219
220 return ide_setup_pci_device(dev, d);
221}
222
223static struct pci_device_id hpt34x_pci_tbl[] = {
224 { PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT343, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
225 { 0, },
226};
227MODULE_DEVICE_TABLE(pci, hpt34x_pci_tbl);
228
229static struct pci_driver driver = {
230 .name = "HPT34x_IDE",
231 .id_table = hpt34x_pci_tbl,
232 .probe = hpt34x_init_one,
233};
234
82ab1eec 235static int __init hpt34x_ide_init(void)
1da177e4
LT
236{
237 return ide_pci_register_driver(&driver);
238}
239
240module_init(hpt34x_ide_init);
241
242MODULE_AUTHOR("Andre Hedrick");
243MODULE_DESCRIPTION("PCI driver module for Highpoint 34x IDE");
244MODULE_LICENSE("GPL");
This page took 0.202208 seconds and 5 git commands to generate.