Commit | Line | Data |
---|---|---|
1da177e4 | 1 | /* |
0271fc2d | 2 | * Copyright (c) 2003-2006 Silicon Graphics, Inc. All Rights Reserved. |
1da177e4 LT |
3 | * |
4 | * This program is free software; you can redistribute it and/or modify it | |
5 | * under the terms of version 2 of the GNU General Public License | |
6 | * as published by the Free Software Foundation. | |
7 | * | |
8 | * This program is distributed in the hope that it would be useful, but | |
9 | * WITHOUT ANY WARRANTY; without even the implied warranty of | |
10 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. | |
11 | * | |
12 | * You should have received a copy of the GNU General Public | |
13 | * License along with this program; if not, write the Free Software | |
14 | * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. | |
15 | * | |
1da177e4 LT |
16 | * For further information regarding this notice, see: |
17 | * | |
18 | * http://oss.sgi.com/projects/GenInfo/NoticeExplan | |
19 | */ | |
20 | ||
21 | #include <linux/module.h> | |
22 | #include <linux/types.h> | |
23 | #include <linux/pci.h> | |
24 | #include <linux/delay.h> | |
25 | #include <linux/hdreg.h> | |
26 | #include <linux/init.h> | |
27 | #include <linux/kernel.h> | |
28 | #include <linux/timer.h> | |
29 | #include <linux/mm.h> | |
30 | #include <linux/ioport.h> | |
31 | #include <linux/blkdev.h> | |
22329b51 | 32 | #include <linux/ioc4.h> |
1da177e4 LT |
33 | #include <asm/io.h> |
34 | ||
35 | #include <linux/ide.h> | |
36 | ||
37 | /* IOC4 Specific Definitions */ | |
38 | #define IOC4_CMD_OFFSET 0x100 | |
39 | #define IOC4_CTRL_OFFSET 0x120 | |
40 | #define IOC4_DMA_OFFSET 0x140 | |
41 | #define IOC4_INTR_OFFSET 0x0 | |
42 | ||
43 | #define IOC4_TIMING 0x00 | |
44 | #define IOC4_DMA_PTR_L 0x01 | |
45 | #define IOC4_DMA_PTR_H 0x02 | |
46 | #define IOC4_DMA_ADDR_L 0x03 | |
47 | #define IOC4_DMA_ADDR_H 0x04 | |
48 | #define IOC4_BC_DEV 0x05 | |
49 | #define IOC4_BC_MEM 0x06 | |
50 | #define IOC4_DMA_CTRL 0x07 | |
51 | #define IOC4_DMA_END_ADDR 0x08 | |
52 | ||
53 | /* Bits in the IOC4 Control/Status Register */ | |
54 | #define IOC4_S_DMA_START 0x01 | |
55 | #define IOC4_S_DMA_STOP 0x02 | |
56 | #define IOC4_S_DMA_DIR 0x04 | |
57 | #define IOC4_S_DMA_ACTIVE 0x08 | |
58 | #define IOC4_S_DMA_ERROR 0x10 | |
59 | #define IOC4_ATA_MEMERR 0x02 | |
60 | ||
61 | /* Read/Write Directions */ | |
62 | #define IOC4_DMA_WRITE 0x04 | |
63 | #define IOC4_DMA_READ 0x00 | |
64 | ||
65 | /* Interrupt Register Offsets */ | |
66 | #define IOC4_INTR_REG 0x03 | |
67 | #define IOC4_INTR_SET 0x05 | |
68 | #define IOC4_INTR_CLEAR 0x07 | |
69 | ||
70 | #define IOC4_IDE_CACHELINE_SIZE 128 | |
71 | #define IOC4_CMD_CTL_BLK_SIZE 0x20 | |
72 | #define IOC4_SUPPORTED_FIRMWARE_REV 46 | |
73 | ||
74 | typedef struct { | |
75 | u32 timing_reg0; | |
76 | u32 timing_reg1; | |
77 | u32 low_mem_ptr; | |
78 | u32 high_mem_ptr; | |
79 | u32 low_mem_addr; | |
80 | u32 high_mem_addr; | |
81 | u32 dev_byte_count; | |
82 | u32 mem_byte_count; | |
83 | u32 status; | |
84 | } ioc4_dma_regs_t; | |
85 | ||
86 | /* Each Physical Region Descriptor Entry size is 16 bytes (2 * 64 bits) */ | |
87 | /* IOC4 has only 1 IDE channel */ | |
88 | #define IOC4_PRD_BYTES 16 | |
89 | #define IOC4_PRD_ENTRIES (PAGE_SIZE /(4*IOC4_PRD_BYTES)) | |
90 | ||
91 | ||
92 | static void | |
93 | sgiioc4_init_hwif_ports(hw_regs_t * hw, unsigned long data_port, | |
94 | unsigned long ctrl_port, unsigned long irq_port) | |
95 | { | |
96 | unsigned long reg = data_port; | |
97 | int i; | |
98 | ||
99 | /* Registers are word (32 bit) aligned */ | |
100 | for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) | |
101 | hw->io_ports[i] = reg + i * 4; | |
102 | ||
103 | if (ctrl_port) | |
104 | hw->io_ports[IDE_CONTROL_OFFSET] = ctrl_port; | |
105 | ||
106 | if (irq_port) | |
107 | hw->io_ports[IDE_IRQ_OFFSET] = irq_port; | |
108 | } | |
109 | ||
110 | static void | |
111 | sgiioc4_maskproc(ide_drive_t * drive, int mask) | |
112 | { | |
113 | ide_hwif_t *hwif = HWIF(drive); | |
114 | hwif->OUTB(mask ? (drive->ctl | 2) : (drive->ctl & ~2), | |
115 | IDE_CONTROL_REG); | |
116 | } | |
117 | ||
118 | ||
119 | static int | |
120 | sgiioc4_checkirq(ide_hwif_t * hwif) | |
121 | { | |
122 | u8 intr_reg = | |
123 | hwif->INL(hwif->io_ports[IDE_IRQ_OFFSET] + IOC4_INTR_REG * 4); | |
124 | ||
125 | if (intr_reg & 0x03) | |
126 | return 1; | |
127 | ||
128 | return 0; | |
129 | } | |
130 | ||
131 | ||
132 | static int | |
133 | sgiioc4_clearirq(ide_drive_t * drive) | |
134 | { | |
135 | u32 intr_reg; | |
136 | ide_hwif_t *hwif = HWIF(drive); | |
137 | unsigned long other_ir = | |
138 | hwif->io_ports[IDE_IRQ_OFFSET] + (IOC4_INTR_REG << 2); | |
139 | ||
140 | /* Code to check for PCI error conditions */ | |
141 | intr_reg = hwif->INL(other_ir); | |
142 | if (intr_reg & 0x03) { /* Valid IOC4-IDE interrupt */ | |
143 | /* | |
144 | * Using hwif->INB to read the IDE_STATUS_REG has a side effect | |
145 | * of clearing the interrupt. The first read should clear it | |
146 | * if it is set. The second read should return a "clear" status | |
147 | * if it got cleared. If not, then spin for a bit trying to | |
148 | * clear it. | |
149 | */ | |
150 | u8 stat = hwif->INB(IDE_STATUS_REG); | |
151 | int count = 0; | |
152 | stat = hwif->INB(IDE_STATUS_REG); | |
153 | while ((stat & 0x80) && (count++ < 100)) { | |
154 | udelay(1); | |
155 | stat = hwif->INB(IDE_STATUS_REG); | |
156 | } | |
157 | ||
158 | if (intr_reg & 0x02) { | |
159 | /* Error when transferring DMA data on PCI bus */ | |
160 | u32 pci_err_addr_low, pci_err_addr_high, | |
161 | pci_stat_cmd_reg; | |
162 | ||
163 | pci_err_addr_low = | |
164 | hwif->INL(hwif->io_ports[IDE_IRQ_OFFSET]); | |
165 | pci_err_addr_high = | |
166 | hwif->INL(hwif->io_ports[IDE_IRQ_OFFSET] + 4); | |
167 | pci_read_config_dword(hwif->pci_dev, PCI_COMMAND, | |
168 | &pci_stat_cmd_reg); | |
169 | printk(KERN_ERR | |
170 | "%s(%s) : PCI Bus Error when doing DMA:" | |
171 | " status-cmd reg is 0x%x\n", | |
172 | __FUNCTION__, drive->name, pci_stat_cmd_reg); | |
173 | printk(KERN_ERR | |
174 | "%s(%s) : PCI Error Address is 0x%x%x\n", | |
175 | __FUNCTION__, drive->name, | |
176 | pci_err_addr_high, pci_err_addr_low); | |
177 | /* Clear the PCI Error indicator */ | |
178 | pci_write_config_dword(hwif->pci_dev, PCI_COMMAND, | |
179 | 0x00000146); | |
180 | } | |
181 | ||
182 | /* Clear the Interrupt, Error bits on the IOC4 */ | |
183 | hwif->OUTL(0x03, other_ir); | |
184 | ||
185 | intr_reg = hwif->INL(other_ir); | |
186 | } | |
187 | ||
188 | return intr_reg & 3; | |
189 | } | |
190 | ||
191 | static void sgiioc4_ide_dma_start(ide_drive_t * drive) | |
192 | { | |
193 | ide_hwif_t *hwif = HWIF(drive); | |
194 | unsigned int reg = hwif->INL(hwif->dma_base + IOC4_DMA_CTRL * 4); | |
195 | unsigned int temp_reg = reg | IOC4_S_DMA_START; | |
196 | ||
197 | hwif->OUTL(temp_reg, hwif->dma_base + IOC4_DMA_CTRL * 4); | |
198 | } | |
199 | ||
200 | static u32 | |
201 | sgiioc4_ide_dma_stop(ide_hwif_t *hwif, u64 dma_base) | |
202 | { | |
203 | u32 ioc4_dma; | |
204 | int count; | |
205 | ||
206 | count = 0; | |
207 | ioc4_dma = hwif->INL(dma_base + IOC4_DMA_CTRL * 4); | |
208 | while ((ioc4_dma & IOC4_S_DMA_STOP) && (count++ < 200)) { | |
209 | udelay(1); | |
210 | ioc4_dma = hwif->INL(dma_base + IOC4_DMA_CTRL * 4); | |
211 | } | |
212 | return ioc4_dma; | |
213 | } | |
214 | ||
215 | /* Stops the IOC4 DMA Engine */ | |
216 | static int | |
217 | sgiioc4_ide_dma_end(ide_drive_t * drive) | |
218 | { | |
219 | u32 ioc4_dma, bc_dev, bc_mem, num, valid = 0, cnt = 0; | |
220 | ide_hwif_t *hwif = HWIF(drive); | |
221 | u64 dma_base = hwif->dma_base; | |
222 | int dma_stat = 0; | |
3f63c5e8 | 223 | unsigned long *ending_dma = ide_get_hwifdata(hwif); |
1da177e4 LT |
224 | |
225 | hwif->OUTL(IOC4_S_DMA_STOP, dma_base + IOC4_DMA_CTRL * 4); | |
226 | ||
227 | ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base); | |
228 | ||
229 | if (ioc4_dma & IOC4_S_DMA_STOP) { | |
230 | printk(KERN_ERR | |
231 | "%s(%s): IOC4 DMA STOP bit is still 1 :" | |
232 | "ioc4_dma_reg 0x%x\n", | |
233 | __FUNCTION__, drive->name, ioc4_dma); | |
234 | dma_stat = 1; | |
235 | } | |
236 | ||
237 | /* | |
238 | * The IOC4 will DMA 1's to the ending dma area to indicate that | |
239 | * previous data DMA is complete. This is necessary because of relaxed | |
240 | * ordering between register reads and DMA writes on the Altix. | |
241 | */ | |
242 | while ((cnt++ < 200) && (!valid)) { | |
243 | for (num = 0; num < 16; num++) { | |
244 | if (ending_dma[num]) { | |
245 | valid = 1; | |
246 | break; | |
247 | } | |
248 | } | |
249 | udelay(1); | |
250 | } | |
251 | if (!valid) { | |
252 | printk(KERN_ERR "%s(%s) : DMA incomplete\n", __FUNCTION__, | |
253 | drive->name); | |
254 | dma_stat = 1; | |
255 | } | |
256 | ||
257 | bc_dev = hwif->INL(dma_base + IOC4_BC_DEV * 4); | |
258 | bc_mem = hwif->INL(dma_base + IOC4_BC_MEM * 4); | |
259 | ||
260 | if ((bc_dev & 0x01FF) || (bc_mem & 0x1FF)) { | |
261 | if (bc_dev > bc_mem + 8) { | |
262 | printk(KERN_ERR | |
263 | "%s(%s): WARNING!! byte_count_dev %d " | |
264 | "!= byte_count_mem %d\n", | |
265 | __FUNCTION__, drive->name, bc_dev, bc_mem); | |
266 | } | |
267 | } | |
268 | ||
269 | drive->waiting_for_dma = 0; | |
270 | ide_destroy_dmatable(drive); | |
271 | ||
272 | return dma_stat; | |
273 | } | |
274 | ||
275 | static int | |
276 | sgiioc4_ide_dma_check(ide_drive_t * drive) | |
277 | { | |
278 | if (ide_config_drive_speed(drive, XFER_MW_DMA_2) != 0) { | |
279 | printk(KERN_INFO | |
280 | "Couldnot set %s in Multimode-2 DMA mode | " | |
281 | "Drive %s using PIO instead\n", | |
282 | drive->name, drive->name); | |
283 | drive->using_dma = 0; | |
284 | } else | |
285 | drive->using_dma = 1; | |
286 | ||
287 | return 0; | |
288 | } | |
289 | ||
290 | static int | |
291 | sgiioc4_ide_dma_on(ide_drive_t * drive) | |
292 | { | |
293 | drive->using_dma = 1; | |
294 | ||
295 | return HWIF(drive)->ide_dma_host_on(drive); | |
296 | } | |
297 | ||
298 | static int | |
299 | sgiioc4_ide_dma_off_quietly(ide_drive_t * drive) | |
300 | { | |
301 | drive->using_dma = 0; | |
302 | ||
303 | return HWIF(drive)->ide_dma_host_off(drive); | |
304 | } | |
305 | ||
306 | /* returns 1 if dma irq issued, 0 otherwise */ | |
307 | static int | |
308 | sgiioc4_ide_dma_test_irq(ide_drive_t * drive) | |
309 | { | |
310 | return sgiioc4_checkirq(HWIF(drive)); | |
311 | } | |
312 | ||
313 | static int | |
314 | sgiioc4_ide_dma_host_on(ide_drive_t * drive) | |
315 | { | |
316 | if (drive->using_dma) | |
317 | return 0; | |
318 | ||
319 | return 1; | |
320 | } | |
321 | ||
322 | static int | |
323 | sgiioc4_ide_dma_host_off(ide_drive_t * drive) | |
324 | { | |
325 | sgiioc4_clearirq(drive); | |
326 | ||
327 | return 0; | |
328 | } | |
329 | ||
330 | static int | |
331 | sgiioc4_ide_dma_lostirq(ide_drive_t * drive) | |
332 | { | |
333 | HWIF(drive)->resetproc(drive); | |
334 | ||
335 | return __ide_dma_lostirq(drive); | |
336 | } | |
337 | ||
338 | static void | |
339 | sgiioc4_resetproc(ide_drive_t * drive) | |
340 | { | |
341 | sgiioc4_ide_dma_end(drive); | |
342 | sgiioc4_clearirq(drive); | |
343 | } | |
344 | ||
345 | static u8 | |
346 | sgiioc4_INB(unsigned long port) | |
347 | { | |
a835fa79 | 348 | u8 reg = (u8) readb((void __iomem *) port); |
1da177e4 LT |
349 | |
350 | if ((port & 0xFFF) == 0x11C) { /* Status register of IOC4 */ | |
351 | if (reg & 0x51) { /* Not busy...check for interrupt */ | |
352 | unsigned long other_ir = port - 0x110; | |
a835fa79 | 353 | unsigned int intr_reg = (u32) readl((void __iomem *) other_ir); |
1da177e4 LT |
354 | |
355 | /* Clear the Interrupt, Error bits on the IOC4 */ | |
356 | if (intr_reg & 0x03) { | |
a835fa79 JH |
357 | writel(0x03, (void __iomem *) other_ir); |
358 | intr_reg = (u32) readl((void __iomem *) other_ir); | |
1da177e4 LT |
359 | } |
360 | } | |
361 | } | |
362 | ||
363 | return reg; | |
364 | } | |
365 | ||
366 | /* Creates a dma map for the scatter-gather list entries */ | |
367 | static void __devinit | |
368 | ide_dma_sgiioc4(ide_hwif_t * hwif, unsigned long dma_base) | |
369 | { | |
1678df37 | 370 | void __iomem *virt_dma_base; |
1da177e4 | 371 | int num_ports = sizeof (ioc4_dma_regs_t); |
3f63c5e8 | 372 | void *pad; |
1da177e4 LT |
373 | |
374 | printk(KERN_INFO "%s: BM-DMA at 0x%04lx-0x%04lx\n", hwif->name, | |
375 | dma_base, dma_base + num_ports - 1); | |
376 | ||
1678df37 | 377 | if (!request_mem_region(dma_base, num_ports, hwif->name)) { |
1da177e4 LT |
378 | printk(KERN_ERR |
379 | "%s(%s) -- ERROR, Addresses 0x%p to 0x%p " | |
380 | "ALREADY in use\n", | |
381 | __FUNCTION__, hwif->name, (void *) dma_base, | |
382 | (void *) dma_base + num_ports - 1); | |
383 | goto dma_alloc_failure; | |
384 | } | |
385 | ||
1678df37 JK |
386 | virt_dma_base = ioremap(dma_base, num_ports); |
387 | if (virt_dma_base == NULL) { | |
388 | printk(KERN_ERR | |
389 | "%s(%s) -- ERROR, Unable to map addresses 0x%lx to 0x%lx\n", | |
390 | __FUNCTION__, hwif->name, dma_base, dma_base + num_ports - 1); | |
391 | goto dma_remap_failure; | |
392 | } | |
393 | hwif->dma_base = (unsigned long) virt_dma_base; | |
394 | ||
1da177e4 LT |
395 | hwif->dmatable_cpu = pci_alloc_consistent(hwif->pci_dev, |
396 | IOC4_PRD_ENTRIES * IOC4_PRD_BYTES, | |
397 | &hwif->dmatable_dma); | |
398 | ||
399 | if (!hwif->dmatable_cpu) | |
1678df37 | 400 | goto dma_pci_alloc_failure; |
1da177e4 LT |
401 | |
402 | hwif->sg_max_nents = IOC4_PRD_ENTRIES; | |
403 | ||
3f63c5e8 SS |
404 | pad = pci_alloc_consistent(hwif->pci_dev, IOC4_IDE_CACHELINE_SIZE, |
405 | (dma_addr_t *) &(hwif->dma_status)); | |
1da177e4 | 406 | |
3f63c5e8 SS |
407 | if (pad) { |
408 | ide_set_hwifdata(hwif, pad); | |
409 | return; | |
410 | } | |
1da177e4 | 411 | |
1da177e4 LT |
412 | pci_free_consistent(hwif->pci_dev, |
413 | IOC4_PRD_ENTRIES * IOC4_PRD_BYTES, | |
414 | hwif->dmatable_cpu, hwif->dmatable_dma); | |
415 | printk(KERN_INFO | |
416 | "%s() -- Error! Unable to allocate DMA Maps for drive %s\n", | |
417 | __FUNCTION__, hwif->name); | |
418 | printk(KERN_INFO | |
419 | "Changing from DMA to PIO mode for Drive %s\n", hwif->name); | |
420 | ||
1678df37 JK |
421 | dma_pci_alloc_failure: |
422 | iounmap(virt_dma_base); | |
423 | ||
424 | dma_remap_failure: | |
425 | release_mem_region(dma_base, num_ports); | |
426 | ||
1da177e4 LT |
427 | dma_alloc_failure: |
428 | /* Disable DMA because we couldnot allocate any DMA maps */ | |
429 | hwif->autodma = 0; | |
430 | hwif->atapi_dma = 0; | |
431 | } | |
432 | ||
433 | /* Initializes the IOC4 DMA Engine */ | |
434 | static void | |
435 | sgiioc4_configure_for_dma(int dma_direction, ide_drive_t * drive) | |
436 | { | |
437 | u32 ioc4_dma; | |
438 | ide_hwif_t *hwif = HWIF(drive); | |
439 | u64 dma_base = hwif->dma_base; | |
440 | u32 dma_addr, ending_dma_addr; | |
441 | ||
442 | ioc4_dma = hwif->INL(dma_base + IOC4_DMA_CTRL * 4); | |
443 | ||
444 | if (ioc4_dma & IOC4_S_DMA_ACTIVE) { | |
445 | printk(KERN_WARNING | |
446 | "%s(%s):Warning!! DMA from previous transfer was still active\n", | |
447 | __FUNCTION__, drive->name); | |
448 | hwif->OUTL(IOC4_S_DMA_STOP, dma_base + IOC4_DMA_CTRL * 4); | |
449 | ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base); | |
450 | ||
451 | if (ioc4_dma & IOC4_S_DMA_STOP) | |
452 | printk(KERN_ERR | |
453 | "%s(%s) : IOC4 Dma STOP bit is still 1\n", | |
454 | __FUNCTION__, drive->name); | |
455 | } | |
456 | ||
457 | ioc4_dma = hwif->INL(dma_base + IOC4_DMA_CTRL * 4); | |
458 | if (ioc4_dma & IOC4_S_DMA_ERROR) { | |
459 | printk(KERN_WARNING | |
460 | "%s(%s) : Warning!! - DMA Error during Previous" | |
461 | " transfer | status 0x%x\n", | |
462 | __FUNCTION__, drive->name, ioc4_dma); | |
463 | hwif->OUTL(IOC4_S_DMA_STOP, dma_base + IOC4_DMA_CTRL * 4); | |
464 | ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base); | |
465 | ||
466 | if (ioc4_dma & IOC4_S_DMA_STOP) | |
467 | printk(KERN_ERR | |
468 | "%s(%s) : IOC4 DMA STOP bit is still 1\n", | |
469 | __FUNCTION__, drive->name); | |
470 | } | |
471 | ||
472 | /* Address of the Scatter Gather List */ | |
473 | dma_addr = cpu_to_le32(hwif->dmatable_dma); | |
474 | hwif->OUTL(dma_addr, dma_base + IOC4_DMA_PTR_L * 4); | |
475 | ||
476 | /* Address of the Ending DMA */ | |
3f63c5e8 | 477 | memset(ide_get_hwifdata(hwif), 0, IOC4_IDE_CACHELINE_SIZE); |
1da177e4 LT |
478 | ending_dma_addr = cpu_to_le32(hwif->dma_status); |
479 | hwif->OUTL(ending_dma_addr, dma_base + IOC4_DMA_END_ADDR * 4); | |
480 | ||
481 | hwif->OUTL(dma_direction, dma_base + IOC4_DMA_CTRL * 4); | |
482 | drive->waiting_for_dma = 1; | |
483 | } | |
484 | ||
485 | /* IOC4 Scatter Gather list Format */ | |
486 | /* 128 Bit entries to support 64 bit addresses in the future */ | |
487 | /* The Scatter Gather list Entry should be in the BIG-ENDIAN Format */ | |
488 | /* --------------------------------------------------------------------- */ | |
489 | /* | Upper 32 bits - Zero | Lower 32 bits- address | */ | |
490 | /* --------------------------------------------------------------------- */ | |
491 | /* | Upper 32 bits - Zero |EOL| 15 unused | 16 Bit Length| */ | |
492 | /* --------------------------------------------------------------------- */ | |
493 | /* Creates the scatter gather list, DMA Table */ | |
494 | static unsigned int | |
495 | sgiioc4_build_dma_table(ide_drive_t * drive, struct request *rq, int ddir) | |
496 | { | |
497 | ide_hwif_t *hwif = HWIF(drive); | |
498 | unsigned int *table = hwif->dmatable_cpu; | |
499 | unsigned int count = 0, i = 1; | |
500 | struct scatterlist *sg; | |
501 | ||
502 | hwif->sg_nents = i = ide_build_sglist(drive, rq); | |
503 | ||
504 | if (!i) | |
505 | return 0; /* sglist of length Zero */ | |
506 | ||
507 | sg = hwif->sg_table; | |
508 | while (i && sg_dma_len(sg)) { | |
509 | dma_addr_t cur_addr; | |
510 | int cur_len; | |
511 | cur_addr = sg_dma_address(sg); | |
512 | cur_len = sg_dma_len(sg); | |
513 | ||
514 | while (cur_len) { | |
515 | if (count++ >= IOC4_PRD_ENTRIES) { | |
516 | printk(KERN_WARNING | |
517 | "%s: DMA table too small\n", | |
518 | drive->name); | |
519 | goto use_pio_instead; | |
520 | } else { | |
0271fc2d | 521 | u32 bcount = |
1da177e4 LT |
522 | 0x10000 - (cur_addr & 0xffff); |
523 | ||
524 | if (bcount > cur_len) | |
525 | bcount = cur_len; | |
526 | ||
527 | /* put the addr, length in | |
528 | * the IOC4 dma-table format */ | |
529 | *table = 0x0; | |
530 | table++; | |
531 | *table = cpu_to_be32(cur_addr); | |
532 | table++; | |
533 | *table = 0x0; | |
534 | table++; | |
535 | ||
0271fc2d | 536 | *table = cpu_to_be32(bcount); |
1da177e4 LT |
537 | table++; |
538 | ||
539 | cur_addr += bcount; | |
540 | cur_len -= bcount; | |
541 | } | |
542 | } | |
543 | ||
544 | sg++; | |
545 | i--; | |
546 | } | |
547 | ||
548 | if (count) { | |
549 | table--; | |
550 | *table |= cpu_to_be32(0x80000000); | |
551 | return count; | |
552 | } | |
553 | ||
554 | use_pio_instead: | |
555 | pci_unmap_sg(hwif->pci_dev, hwif->sg_table, hwif->sg_nents, | |
556 | hwif->sg_dma_direction); | |
557 | ||
558 | return 0; /* revert to PIO for this request */ | |
559 | } | |
560 | ||
561 | static int sgiioc4_ide_dma_setup(ide_drive_t *drive) | |
562 | { | |
563 | struct request *rq = HWGROUP(drive)->rq; | |
564 | unsigned int count = 0; | |
565 | int ddir; | |
566 | ||
567 | if (rq_data_dir(rq)) | |
568 | ddir = PCI_DMA_TODEVICE; | |
569 | else | |
570 | ddir = PCI_DMA_FROMDEVICE; | |
571 | ||
572 | if (!(count = sgiioc4_build_dma_table(drive, rq, ddir))) { | |
573 | /* try PIO instead of DMA */ | |
574 | ide_map_sg(drive, rq); | |
575 | return 1; | |
576 | } | |
577 | ||
578 | if (rq_data_dir(rq)) | |
579 | /* Writes TO the IOC4 FROM Main Memory */ | |
580 | ddir = IOC4_DMA_READ; | |
581 | else | |
582 | /* Writes FROM the IOC4 TO Main Memory */ | |
583 | ddir = IOC4_DMA_WRITE; | |
584 | ||
585 | sgiioc4_configure_for_dma(ddir, drive); | |
586 | ||
587 | return 0; | |
588 | } | |
589 | ||
590 | static void __devinit | |
591 | ide_init_sgiioc4(ide_hwif_t * hwif) | |
592 | { | |
593 | hwif->mmio = 2; | |
594 | hwif->autodma = 1; | |
595 | hwif->atapi_dma = 1; | |
596 | hwif->ultra_mask = 0x0; /* Disable Ultra DMA */ | |
597 | hwif->mwdma_mask = 0x2; /* Multimode-2 DMA */ | |
598 | hwif->swdma_mask = 0x2; | |
599 | hwif->tuneproc = NULL; /* Sets timing for PIO mode */ | |
600 | hwif->speedproc = NULL; /* Sets timing for DMA &/or PIO modes */ | |
601 | hwif->selectproc = NULL;/* Use the default routine to select drive */ | |
602 | hwif->reset_poll = NULL;/* No HBA specific reset_poll needed */ | |
603 | hwif->pre_reset = NULL; /* No HBA specific pre_set needed */ | |
604 | hwif->resetproc = &sgiioc4_resetproc;/* Reset DMA engine, | |
605 | clear interrupts */ | |
606 | hwif->intrproc = NULL; /* Enable or Disable interrupt from drive */ | |
607 | hwif->maskproc = &sgiioc4_maskproc; /* Mask on/off NIEN register */ | |
608 | hwif->quirkproc = NULL; | |
609 | hwif->busproc = NULL; | |
610 | ||
611 | hwif->dma_setup = &sgiioc4_ide_dma_setup; | |
612 | hwif->dma_start = &sgiioc4_ide_dma_start; | |
613 | hwif->ide_dma_end = &sgiioc4_ide_dma_end; | |
614 | hwif->ide_dma_check = &sgiioc4_ide_dma_check; | |
615 | hwif->ide_dma_on = &sgiioc4_ide_dma_on; | |
616 | hwif->ide_dma_off_quietly = &sgiioc4_ide_dma_off_quietly; | |
617 | hwif->ide_dma_test_irq = &sgiioc4_ide_dma_test_irq; | |
618 | hwif->ide_dma_host_on = &sgiioc4_ide_dma_host_on; | |
619 | hwif->ide_dma_host_off = &sgiioc4_ide_dma_host_off; | |
620 | hwif->ide_dma_lostirq = &sgiioc4_ide_dma_lostirq; | |
621 | hwif->ide_dma_timeout = &__ide_dma_timeout; | |
a835fa79 | 622 | |
1da177e4 LT |
623 | hwif->INB = &sgiioc4_INB; |
624 | } | |
625 | ||
626 | static int __devinit | |
627 | sgiioc4_ide_setup_pci_device(struct pci_dev *dev, ide_pci_device_t * d) | |
628 | { | |
1678df37 JK |
629 | unsigned long cmd_base, dma_base, irqport; |
630 | unsigned long bar0, cmd_phys_base, ctl; | |
631 | void __iomem *virt_base; | |
1da177e4 LT |
632 | ide_hwif_t *hwif; |
633 | int h; | |
634 | ||
deb5e5c0 JH |
635 | /* |
636 | * Find an empty HWIF; if none available, return -ENOMEM. | |
637 | */ | |
1da177e4 LT |
638 | for (h = 0; h < MAX_HWIFS; ++h) { |
639 | hwif = &ide_hwifs[h]; | |
1da177e4 LT |
640 | if (hwif->chipset == ide_unknown) |
641 | break; | |
642 | } | |
deb5e5c0 JH |
643 | if (h == MAX_HWIFS) { |
644 | printk(KERN_ERR "%s: too many IDE interfaces, no room in table\n", d->name); | |
645 | return -ENOMEM; | |
646 | } | |
1da177e4 LT |
647 | |
648 | /* Get the CmdBlk and CtrlBlk Base Registers */ | |
1678df37 JK |
649 | bar0 = pci_resource_start(dev, 0); |
650 | virt_base = ioremap(bar0, pci_resource_len(dev, 0)); | |
651 | if (virt_base == NULL) { | |
652 | printk(KERN_ERR "%s: Unable to remap BAR 0 address: 0x%lx\n", | |
653 | d->name, bar0); | |
654 | return -ENOMEM; | |
655 | } | |
656 | cmd_base = (unsigned long) virt_base + IOC4_CMD_OFFSET; | |
657 | ctl = (unsigned long) virt_base + IOC4_CTRL_OFFSET; | |
658 | irqport = (unsigned long) virt_base + IOC4_INTR_OFFSET; | |
1da177e4 LT |
659 | dma_base = pci_resource_start(dev, 0) + IOC4_DMA_OFFSET; |
660 | ||
1678df37 JK |
661 | cmd_phys_base = bar0 + IOC4_CMD_OFFSET; |
662 | if (!request_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE, | |
663 | hwif->name)) { | |
1da177e4 | 664 | printk(KERN_ERR |
1678df37 | 665 | "%s : %s -- ERROR, Addresses " |
1da177e4 | 666 | "0x%p to 0x%p ALREADY in use\n", |
1678df37 JK |
667 | __FUNCTION__, hwif->name, (void *) cmd_phys_base, |
668 | (void *) cmd_phys_base + IOC4_CMD_CTL_BLK_SIZE); | |
1da177e4 LT |
669 | return -ENOMEM; |
670 | } | |
671 | ||
1678df37 | 672 | if (hwif->io_ports[IDE_DATA_OFFSET] != cmd_base) { |
1da177e4 | 673 | /* Initialize the IO registers */ |
1678df37 | 674 | sgiioc4_init_hwif_ports(&hwif->hw, cmd_base, ctl, irqport); |
1da177e4 LT |
675 | memcpy(hwif->io_ports, hwif->hw.io_ports, |
676 | sizeof (hwif->io_ports)); | |
677 | hwif->noprobe = !hwif->io_ports[IDE_DATA_OFFSET]; | |
678 | } | |
679 | ||
680 | hwif->irq = dev->irq; | |
681 | hwif->chipset = ide_pci; | |
682 | hwif->pci_dev = dev; | |
683 | hwif->channel = 0; /* Single Channel chip */ | |
684 | hwif->cds = (struct ide_pci_device_s *) d; | |
685 | hwif->gendev.parent = &dev->dev;/* setup proper ancestral information */ | |
686 | ||
1678df37 JK |
687 | /* The IOC4 uses MMIO rather than Port IO. */ |
688 | default_hwif_mmiops(hwif); | |
689 | ||
1da177e4 LT |
690 | /* Initializing chipset IRQ Registers */ |
691 | hwif->OUTL(0x03, irqport + IOC4_INTR_SET * 4); | |
692 | ||
693 | ide_init_sgiioc4(hwif); | |
694 | ||
695 | if (dma_base) | |
696 | ide_dma_sgiioc4(hwif, dma_base); | |
697 | else | |
698 | printk(KERN_INFO "%s: %s Bus-Master DMA disabled\n", | |
699 | hwif->name, d->name); | |
700 | ||
701 | if (probe_hwif_init(hwif)) | |
702 | return -EIO; | |
703 | ||
704 | /* Create /proc/ide entries */ | |
0271fc2d | 705 | create_proc_ide_interfaces(); |
1da177e4 LT |
706 | |
707 | return 0; | |
708 | } | |
709 | ||
710 | static unsigned int __devinit | |
711 | pci_init_sgiioc4(struct pci_dev *dev, ide_pci_device_t * d) | |
712 | { | |
713 | unsigned int class_rev; | |
714 | int ret; | |
715 | ||
716 | pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev); | |
717 | class_rev &= 0xff; | |
718 | printk(KERN_INFO "%s: IDE controller at PCI slot %s, revision %d\n", | |
719 | d->name, pci_name(dev), class_rev); | |
720 | if (class_rev < IOC4_SUPPORTED_FIRMWARE_REV) { | |
721 | printk(KERN_ERR "Skipping %s IDE controller in slot %s: " | |
722 | "firmware is obsolete - please upgrade to revision" | |
723 | "46 or higher\n", d->name, pci_name(dev)); | |
724 | ret = -EAGAIN; | |
725 | goto out; | |
726 | } | |
727 | ret = sgiioc4_ide_setup_pci_device(dev, d); | |
728 | out: | |
729 | return ret; | |
730 | } | |
731 | ||
732 | static ide_pci_device_t sgiioc4_chipsets[] __devinitdata = { | |
733 | { | |
734 | /* Channel 0 */ | |
735 | .name = "SGIIOC4", | |
736 | .init_hwif = ide_init_sgiioc4, | |
737 | .init_dma = ide_dma_sgiioc4, | |
738 | .channels = 1, | |
739 | .autodma = AUTODMA, | |
740 | /* SGI IOC4 doesn't have enablebits. */ | |
741 | .bootable = ON_BOARD, | |
742 | } | |
743 | }; | |
744 | ||
745 | int | |
22329b51 | 746 | ioc4_ide_attach_one(struct ioc4_driver_data *idd) |
1da177e4 | 747 | { |
f5befceb BC |
748 | /* PCI-RT does not bring out IDE connection. |
749 | * Do not attach to this particular IOC4. | |
750 | */ | |
751 | if (idd->idd_variant == IOC4_VARIANT_PCI_RT) | |
752 | return 0; | |
753 | ||
22329b51 BC |
754 | return pci_init_sgiioc4(idd->idd_pdev, |
755 | &sgiioc4_chipsets[idd->idd_pci_id->driver_data]); | |
1da177e4 LT |
756 | } |
757 | ||
22329b51 BC |
758 | static struct ioc4_submodule ioc4_ide_submodule = { |
759 | .is_name = "IOC4_ide", | |
760 | .is_owner = THIS_MODULE, | |
761 | .is_probe = ioc4_ide_attach_one, | |
762 | /* .is_remove = ioc4_ide_remove_one, */ | |
763 | }; | |
764 | ||
82ab1eec | 765 | static int __init ioc4_ide_init(void) |
22329b51 BC |
766 | { |
767 | return ioc4_register_submodule(&ioc4_ide_submodule); | |
768 | } | |
769 | ||
59f14800 | 770 | late_initcall(ioc4_ide_init); /* Call only after IDE init is done */ |
1da177e4 | 771 | |
a835fa79 | 772 | MODULE_AUTHOR("Aniket Malatpure/Jeremy Higdon"); |
1da177e4 LT |
773 | MODULE_DESCRIPTION("IDE PCI driver module for SGI IOC4 Base-IO Card"); |
774 | MODULE_LICENSE("GPL"); |