Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * linux/drivers/ide/setup-pci.c Version 1.10 2002/08/19 | |
3 | * | |
4 | * Copyright (c) 1998-2000 Andre Hedrick <andre@linux-ide.org> | |
5 | * | |
6 | * Copyright (c) 1995-1998 Mark Lord | |
7 | * May be copied or modified under the terms of the GNU General Public License | |
1da177e4 LT |
8 | */ |
9 | ||
1da177e4 LT |
10 | #include <linux/module.h> |
11 | #include <linux/types.h> | |
12 | #include <linux/kernel.h> | |
13 | #include <linux/pci.h> | |
14 | #include <linux/init.h> | |
15 | #include <linux/timer.h> | |
16 | #include <linux/mm.h> | |
17 | #include <linux/interrupt.h> | |
18 | #include <linux/ide.h> | |
19 | #include <linux/dma-mapping.h> | |
20 | ||
21 | #include <asm/io.h> | |
22 | #include <asm/irq.h> | |
23 | ||
24 | ||
25 | /** | |
26 | * ide_match_hwif - match a PCI IDE against an ide_hwif | |
27 | * @io_base: I/O base of device | |
28 | * @bootable: set if its bootable | |
29 | * @name: name of device | |
30 | * | |
31 | * Match a PCI IDE port against an entry in ide_hwifs[], | |
32 | * based on io_base port if possible. Return the matching hwif, | |
33 | * or a new hwif. If we find an error (clashing, out of devices, etc) | |
34 | * return NULL | |
35 | * | |
36 | * FIXME: we need to handle mmio matches here too | |
37 | */ | |
38 | ||
39 | static ide_hwif_t *ide_match_hwif(unsigned long io_base, u8 bootable, const char *name) | |
40 | { | |
41 | int h; | |
42 | ide_hwif_t *hwif; | |
43 | ||
44 | /* | |
45 | * Look for a hwif with matching io_base specified using | |
46 | * parameters to ide_setup(). | |
47 | */ | |
48 | for (h = 0; h < MAX_HWIFS; ++h) { | |
49 | hwif = &ide_hwifs[h]; | |
50 | if (hwif->io_ports[IDE_DATA_OFFSET] == io_base) { | |
51 | if (hwif->chipset == ide_forced) | |
52 | return hwif; /* a perfect match */ | |
53 | } | |
54 | } | |
55 | /* | |
56 | * Look for a hwif with matching io_base default value. | |
57 | * If chipset is "ide_unknown", then claim that hwif slot. | |
58 | * Otherwise, some other chipset has already claimed it.. :( | |
59 | */ | |
60 | for (h = 0; h < MAX_HWIFS; ++h) { | |
61 | hwif = &ide_hwifs[h]; | |
62 | if (hwif->io_ports[IDE_DATA_OFFSET] == io_base) { | |
63 | if (hwif->chipset == ide_unknown) | |
64 | return hwif; /* match */ | |
65 | printk(KERN_ERR "%s: port 0x%04lx already claimed by %s\n", | |
66 | name, io_base, hwif->name); | |
67 | return NULL; /* already claimed */ | |
68 | } | |
69 | } | |
70 | /* | |
71 | * Okay, there is no hwif matching our io_base, | |
72 | * so we'll just claim an unassigned slot. | |
73 | * Give preference to claiming other slots before claiming ide0/ide1, | |
74 | * just in case there's another interface yet-to-be-scanned | |
75 | * which uses ports 1f0/170 (the ide0/ide1 defaults). | |
76 | * | |
77 | * Unless there is a bootable card that does not use the standard | |
78 | * ports 1f0/170 (the ide0/ide1 defaults). The (bootable) flag. | |
79 | */ | |
80 | if (bootable) { | |
81 | for (h = 0; h < MAX_HWIFS; ++h) { | |
82 | hwif = &ide_hwifs[h]; | |
83 | if (hwif->chipset == ide_unknown) | |
84 | return hwif; /* pick an unused entry */ | |
85 | } | |
86 | } else { | |
87 | for (h = 2; h < MAX_HWIFS; ++h) { | |
88 | hwif = ide_hwifs + h; | |
89 | if (hwif->chipset == ide_unknown) | |
90 | return hwif; /* pick an unused entry */ | |
91 | } | |
92 | } | |
83d7dbc4 | 93 | for (h = 0; h < 2 && h < MAX_HWIFS; ++h) { |
1da177e4 LT |
94 | hwif = ide_hwifs + h; |
95 | if (hwif->chipset == ide_unknown) | |
96 | return hwif; /* pick an unused entry */ | |
97 | } | |
98 | printk(KERN_ERR "%s: too many IDE interfaces, no room in table\n", name); | |
99 | return NULL; | |
100 | } | |
101 | ||
102 | /** | |
103 | * ide_setup_pci_baseregs - place a PCI IDE controller native | |
104 | * @dev: PCI device of interface to switch native | |
105 | * @name: Name of interface | |
106 | * | |
107 | * We attempt to place the PCI interface into PCI native mode. If | |
108 | * we succeed the BARs are ok and the controller is in PCI mode. | |
109 | * Returns 0 on success or an errno code. | |
110 | * | |
111 | * FIXME: if we program the interface and then fail to set the BARS | |
112 | * we don't switch it back to legacy mode. Do we actually care ?? | |
113 | */ | |
114 | ||
115 | static int ide_setup_pci_baseregs (struct pci_dev *dev, const char *name) | |
116 | { | |
117 | u8 progif = 0; | |
118 | ||
119 | /* | |
120 | * Place both IDE interfaces into PCI "native" mode: | |
121 | */ | |
122 | if (pci_read_config_byte(dev, PCI_CLASS_PROG, &progif) || | |
123 | (progif & 5) != 5) { | |
124 | if ((progif & 0xa) != 0xa) { | |
125 | printk(KERN_INFO "%s: device not capable of full " | |
126 | "native PCI mode\n", name); | |
127 | return -EOPNOTSUPP; | |
128 | } | |
129 | printk("%s: placing both ports into native PCI mode\n", name); | |
130 | (void) pci_write_config_byte(dev, PCI_CLASS_PROG, progif|5); | |
131 | if (pci_read_config_byte(dev, PCI_CLASS_PROG, &progif) || | |
132 | (progif & 5) != 5) { | |
133 | printk(KERN_ERR "%s: rewrite of PROGIF failed, wanted " | |
134 | "0x%04x, got 0x%04x\n", | |
135 | name, progif|5, progif); | |
136 | return -EOPNOTSUPP; | |
137 | } | |
138 | } | |
139 | return 0; | |
140 | } | |
141 | ||
142 | #ifdef CONFIG_BLK_DEV_IDEDMA_PCI | |
8ac2b42a BZ |
143 | static void ide_pci_clear_simplex(unsigned long dma_base, const char *name) |
144 | { | |
145 | u8 dma_stat = inb(dma_base + 2); | |
146 | ||
147 | outb(dma_stat & 0x60, dma_base + 2); | |
148 | dma_stat = inb(dma_base + 2); | |
149 | if (dma_stat & 0x80) | |
150 | printk(KERN_INFO "%s: simplex device: DMA forced\n", name); | |
151 | } | |
152 | ||
1da177e4 LT |
153 | /** |
154 | * ide_get_or_set_dma_base - setup BMIBA | |
039788e1 BZ |
155 | * @d: IDE port info |
156 | * @hwif: IDE interface | |
1da177e4 | 157 | * |
c58e79dd BZ |
158 | * Fetch the DMA Bus-Master-I/O-Base-Address (BMIBA) from PCI space. |
159 | * Where a device has a partner that is already in DMA mode we check | |
160 | * and enforce IDE simplex rules. | |
1da177e4 LT |
161 | */ |
162 | ||
85620436 | 163 | static unsigned long ide_get_or_set_dma_base(const struct ide_port_info *d, ide_hwif_t *hwif) |
1da177e4 | 164 | { |
36501650 BZ |
165 | struct pci_dev *dev = to_pci_dev(hwif->dev); |
166 | unsigned long dma_base = 0; | |
8ac2b42a | 167 | u8 dma_stat = 0; |
1da177e4 | 168 | |
1da177e4 LT |
169 | if (hwif->mmio) |
170 | return hwif->dma_base; | |
171 | ||
172 | if (hwif->mate && hwif->mate->dma_base) { | |
173 | dma_base = hwif->mate->dma_base - (hwif->channel ? 0 : 8); | |
174 | } else { | |
9ffcf364 BZ |
175 | u8 baridx = (d->host_flags & IDE_HFLAG_CS5520) ? 2 : 4; |
176 | ||
177 | dma_base = pci_resource_start(dev, baridx); | |
178 | ||
aea5d375 | 179 | if (dma_base == 0) { |
9ffcf364 | 180 | printk(KERN_ERR "%s: DMA base is invalid\n", d->name); |
aea5d375 BZ |
181 | return 0; |
182 | } | |
1da177e4 LT |
183 | } |
184 | ||
aea5d375 BZ |
185 | if (hwif->channel) |
186 | dma_base += 8; | |
187 | ||
8ac2b42a BZ |
188 | if (d->host_flags & IDE_HFLAG_CS5520) |
189 | goto out; | |
190 | ||
191 | if (d->host_flags & IDE_HFLAG_CLEAR_SIMPLEX) { | |
192 | ide_pci_clear_simplex(dma_base, d->name); | |
193 | goto out; | |
194 | } | |
195 | ||
196 | /* | |
197 | * If the device claims "simplex" DMA, this means that only one of | |
198 | * the two interfaces can be trusted with DMA at any point in time | |
199 | * (so we should enable DMA only on one of the two interfaces). | |
200 | * | |
201 | * FIXME: At this point we haven't probed the drives so we can't make | |
202 | * the appropriate decision. Really we should defer this problem until | |
203 | * we tune the drive then try to grab DMA ownership if we want to be | |
204 | * the DMA end. This has to be become dynamic to handle hot-plug. | |
205 | */ | |
206 | dma_stat = hwif->INB(dma_base + 2); | |
207 | if ((dma_stat & 0x80) && hwif->mate && hwif->mate->dma_base) { | |
208 | printk(KERN_INFO "%s: simplex device: DMA disabled\n", d->name); | |
209 | dma_base = 0; | |
1da177e4 | 210 | } |
8ac2b42a | 211 | out: |
1da177e4 LT |
212 | return dma_base; |
213 | } | |
214 | #endif /* CONFIG_BLK_DEV_IDEDMA_PCI */ | |
215 | ||
85620436 | 216 | void ide_setup_pci_noise(struct pci_dev *dev, const struct ide_port_info *d) |
1da177e4 | 217 | { |
bde07e5e BZ |
218 | printk(KERN_INFO "%s: IDE controller (0x%04x:0x%04x rev 0x%02x) at " |
219 | " PCI slot %s\n", d->name, dev->vendor, dev->device, | |
220 | dev->revision, pci_name(dev)); | |
1da177e4 LT |
221 | } |
222 | ||
223 | EXPORT_SYMBOL_GPL(ide_setup_pci_noise); | |
224 | ||
225 | ||
226 | /** | |
227 | * ide_pci_enable - do PCI enables | |
228 | * @dev: PCI device | |
039788e1 | 229 | * @d: IDE port info |
1da177e4 LT |
230 | * |
231 | * Enable the IDE PCI device. We attempt to enable the device in full | |
232 | * but if that fails then we only need BAR4 so we will enable that. | |
233 | * | |
234 | * Returns zero on success or an error code | |
235 | */ | |
039788e1 | 236 | |
85620436 | 237 | static int ide_pci_enable(struct pci_dev *dev, const struct ide_port_info *d) |
1da177e4 LT |
238 | { |
239 | int ret; | |
240 | ||
241 | if (pci_enable_device(dev)) { | |
242 | ret = pci_enable_device_bars(dev, 1 << 4); | |
243 | if (ret < 0) { | |
244 | printk(KERN_WARNING "%s: (ide_setup_pci_device:) " | |
245 | "Could not enable device.\n", d->name); | |
246 | goto out; | |
247 | } | |
248 | printk(KERN_WARNING "%s: BIOS configuration fixed.\n", d->name); | |
249 | } | |
250 | ||
251 | /* | |
039788e1 BZ |
252 | * assume all devices can do 32-bit DMA for now, we can add |
253 | * a DMA mask field to the struct ide_port_info if we need it | |
254 | * (or let lower level driver set the DMA mask) | |
1da177e4 LT |
255 | */ |
256 | ret = pci_set_dma_mask(dev, DMA_32BIT_MASK); | |
257 | if (ret < 0) { | |
258 | printk(KERN_ERR "%s: can't set dma mask\n", d->name); | |
259 | goto out; | |
260 | } | |
261 | ||
262 | /* FIXME: Temporary - until we put in the hotplug interface logic | |
263 | Check that the bits we want are not in use by someone else. */ | |
264 | ret = pci_request_region(dev, 4, "ide_tmp"); | |
265 | if (ret < 0) | |
266 | goto out; | |
267 | ||
268 | pci_release_region(dev, 4); | |
269 | out: | |
270 | return ret; | |
271 | } | |
272 | ||
273 | /** | |
274 | * ide_pci_configure - configure an unconfigured device | |
275 | * @dev: PCI device | |
039788e1 | 276 | * @d: IDE port info |
1da177e4 LT |
277 | * |
278 | * Enable and configure the PCI device we have been passed. | |
279 | * Returns zero on success or an error code. | |
280 | */ | |
039788e1 | 281 | |
85620436 | 282 | static int ide_pci_configure(struct pci_dev *dev, const struct ide_port_info *d) |
1da177e4 LT |
283 | { |
284 | u16 pcicmd = 0; | |
285 | /* | |
286 | * PnP BIOS was *supposed* to have setup this device, but we | |
287 | * can do it ourselves, so long as the BIOS has assigned an IRQ | |
288 | * (or possibly the device is using a "legacy header" for IRQs). | |
289 | * Maybe the user deliberately *disabled* the device, | |
290 | * but we'll eventually ignore it again if no drives respond. | |
291 | */ | |
292 | if (ide_setup_pci_baseregs(dev, d->name) || pci_write_config_word(dev, PCI_COMMAND, pcicmd|PCI_COMMAND_IO)) | |
293 | { | |
294 | printk(KERN_INFO "%s: device disabled (BIOS)\n", d->name); | |
295 | return -ENODEV; | |
296 | } | |
297 | if (pci_read_config_word(dev, PCI_COMMAND, &pcicmd)) { | |
298 | printk(KERN_ERR "%s: error accessing PCI regs\n", d->name); | |
299 | return -EIO; | |
300 | } | |
301 | if (!(pcicmd & PCI_COMMAND_IO)) { | |
302 | printk(KERN_ERR "%s: unable to enable IDE controller\n", d->name); | |
303 | return -ENXIO; | |
304 | } | |
305 | return 0; | |
306 | } | |
307 | ||
308 | /** | |
309 | * ide_pci_check_iomem - check a register is I/O | |
039788e1 BZ |
310 | * @dev: PCI device |
311 | * @d: IDE port info | |
312 | * @bar: BAR number | |
1da177e4 LT |
313 | * |
314 | * Checks if a BAR is configured and points to MMIO space. If so | |
315 | * print an error and return an error code. Otherwise return 0 | |
316 | */ | |
039788e1 | 317 | |
85620436 | 318 | static int ide_pci_check_iomem(struct pci_dev *dev, const struct ide_port_info *d, int bar) |
1da177e4 LT |
319 | { |
320 | ulong flags = pci_resource_flags(dev, bar); | |
321 | ||
322 | /* Unconfigured ? */ | |
323 | if (!flags || pci_resource_len(dev, bar) == 0) | |
324 | return 0; | |
325 | ||
326 | /* I/O space */ | |
327 | if(flags & PCI_BASE_ADDRESS_IO_MASK) | |
328 | return 0; | |
329 | ||
330 | /* Bad */ | |
331 | printk(KERN_ERR "%s: IO baseregs (BIOS) are reported " | |
332 | "as MEM, report to " | |
333 | "<andre@linux-ide.org>.\n", d->name); | |
334 | return -EINVAL; | |
335 | } | |
336 | ||
337 | /** | |
338 | * ide_hwif_configure - configure an IDE interface | |
339 | * @dev: PCI device holding interface | |
039788e1 | 340 | * @d: IDE port info |
1da177e4 LT |
341 | * @mate: Paired interface if any |
342 | * | |
343 | * Perform the initial set up for the hardware interface structure. This | |
344 | * is done per interface port rather than per PCI device. There may be | |
345 | * more than one port per device. | |
346 | * | |
347 | * Returns the new hardware interface structure, or NULL on a failure | |
348 | */ | |
039788e1 | 349 | |
85620436 | 350 | static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev, const struct ide_port_info *d, ide_hwif_t *mate, int port, int irq) |
1da177e4 LT |
351 | { |
352 | unsigned long ctl = 0, base = 0; | |
353 | ide_hwif_t *hwif; | |
7cab14a7 | 354 | u8 bootable = (d->host_flags & IDE_HFLAG_BOOTABLE) ? 1 : 0; |
79127c37 BZ |
355 | u8 oldnoprobe = 0; |
356 | struct hw_regs_s hw; | |
1da177e4 | 357 | |
a5d8c5c8 | 358 | if ((d->host_flags & IDE_HFLAG_ISA_PORTS) == 0) { |
1da177e4 LT |
359 | /* Possibly we should fail if these checks report true */ |
360 | ide_pci_check_iomem(dev, d, 2*port); | |
361 | ide_pci_check_iomem(dev, d, 2*port+1); | |
362 | ||
363 | ctl = pci_resource_start(dev, 2*port+1); | |
364 | base = pci_resource_start(dev, 2*port); | |
365 | if ((ctl && !base) || (base && !ctl)) { | |
366 | printk(KERN_ERR "%s: inconsistent baseregs (BIOS) " | |
367 | "for port %d, skipping\n", d->name, port); | |
368 | return NULL; | |
369 | } | |
370 | } | |
371 | if (!ctl) | |
372 | { | |
373 | /* Use default values */ | |
374 | ctl = port ? 0x374 : 0x3f4; | |
375 | base = port ? 0x170 : 0x1f0; | |
376 | } | |
7cab14a7 | 377 | if ((hwif = ide_match_hwif(base, bootable, d->name)) == NULL) |
1da177e4 | 378 | return NULL; /* no room in ide_hwifs[] */ |
79127c37 BZ |
379 | |
380 | memset(&hw, 0, sizeof(hw)); | |
381 | hw.irq = hwif->irq ? hwif->irq : irq; | |
382 | hw.dev = &dev->dev; | |
383 | hw.chipset = d->chipset ? d->chipset : ide_pci; | |
384 | ide_std_init_ports(&hw, base, ctl | 2); | |
385 | ||
386 | if (hwif->io_ports[IDE_DATA_OFFSET] == base && | |
387 | hwif->io_ports[IDE_CONTROL_OFFSET] == (ctl | 2)) | |
388 | oldnoprobe = hwif->noprobe; | |
389 | ||
390 | ide_init_port_hw(hwif, &hw); | |
391 | ||
392 | hwif->noprobe = oldnoprobe; | |
393 | ||
36501650 | 394 | hwif->dev = &dev->dev; |
039788e1 | 395 | hwif->cds = d; |
1da177e4 LT |
396 | hwif->channel = port; |
397 | ||
1da177e4 LT |
398 | if (mate) { |
399 | hwif->mate = mate; | |
400 | mate->mate = hwif; | |
401 | } | |
402 | return hwif; | |
403 | } | |
404 | ||
405 | /** | |
406 | * ide_hwif_setup_dma - configure DMA interface | |
407 | * @dev: PCI device | |
039788e1 BZ |
408 | * @d: IDE port info |
409 | * @hwif: IDE interface | |
1da177e4 LT |
410 | * |
411 | * Set up the DMA base for the interface. Enable the master bits as | |
412 | * necessary and attempt to bring the device DMA into a ready to use | |
413 | * state | |
414 | */ | |
039788e1 | 415 | |
85620436 | 416 | static void ide_hwif_setup_dma(struct pci_dev *dev, const struct ide_port_info *d, ide_hwif_t *hwif) |
1da177e4 | 417 | { |
039788e1 | 418 | #ifdef CONFIG_BLK_DEV_IDEDMA_PCI |
1da177e4 | 419 | u16 pcicmd; |
47b68788 | 420 | |
1da177e4 LT |
421 | pci_read_config_word(dev, PCI_COMMAND, &pcicmd); |
422 | ||
47b68788 | 423 | if ((d->host_flags & IDE_HFLAG_NO_AUTODMA) == 0 || |
1da177e4 LT |
424 | ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE && |
425 | (dev->class & 0x80))) { | |
9ffcf364 | 426 | unsigned long dma_base = ide_get_or_set_dma_base(d, hwif); |
1da177e4 LT |
427 | if (dma_base && !(pcicmd & PCI_COMMAND_MASTER)) { |
428 | /* | |
429 | * Set up BM-DMA capability | |
430 | * (PnP BIOS should have done this) | |
431 | */ | |
1da177e4 LT |
432 | pci_set_master(dev); |
433 | if (pci_read_config_word(dev, PCI_COMMAND, &pcicmd) || !(pcicmd & PCI_COMMAND_MASTER)) { | |
434 | printk(KERN_ERR "%s: %s error updating PCICMD\n", | |
435 | hwif->name, d->name); | |
436 | dma_base = 0; | |
437 | } | |
438 | } | |
439 | if (dma_base) { | |
440 | if (d->init_dma) { | |
441 | d->init_dma(hwif, dma_base); | |
442 | } else { | |
ecf32796 | 443 | ide_setup_dma(hwif, dma_base); |
1da177e4 LT |
444 | } |
445 | } else { | |
446 | printk(KERN_INFO "%s: %s Bus-Master DMA disabled " | |
447 | "(BIOS)\n", hwif->name, d->name); | |
448 | } | |
449 | } | |
1da177e4 | 450 | #endif /* CONFIG_BLK_DEV_IDEDMA_PCI*/ |
039788e1 | 451 | } |
1da177e4 LT |
452 | |
453 | /** | |
454 | * ide_setup_pci_controller - set up IDE PCI | |
455 | * @dev: PCI device | |
039788e1 | 456 | * @d: IDE port info |
1da177e4 LT |
457 | * @noisy: verbose flag |
458 | * @config: returned as 1 if we configured the hardware | |
459 | * | |
460 | * Set up the PCI and controller side of the IDE interface. This brings | |
461 | * up the PCI side of the device, checks that the device is enabled | |
462 | * and enables it if need be | |
463 | */ | |
039788e1 | 464 | |
85620436 | 465 | static int ide_setup_pci_controller(struct pci_dev *dev, const struct ide_port_info *d, int noisy, int *config) |
1da177e4 LT |
466 | { |
467 | int ret; | |
1da177e4 LT |
468 | u16 pcicmd; |
469 | ||
470 | if (noisy) | |
471 | ide_setup_pci_noise(dev, d); | |
472 | ||
473 | ret = ide_pci_enable(dev, d); | |
474 | if (ret < 0) | |
475 | goto out; | |
476 | ||
477 | ret = pci_read_config_word(dev, PCI_COMMAND, &pcicmd); | |
478 | if (ret < 0) { | |
479 | printk(KERN_ERR "%s: error accessing PCI regs\n", d->name); | |
480 | goto out; | |
481 | } | |
482 | if (!(pcicmd & PCI_COMMAND_IO)) { /* is device disabled? */ | |
483 | ret = ide_pci_configure(dev, d); | |
484 | if (ret < 0) | |
485 | goto out; | |
486 | *config = 1; | |
487 | printk(KERN_INFO "%s: device enabled (Linux)\n", d->name); | |
488 | } | |
489 | ||
1da177e4 LT |
490 | out: |
491 | return ret; | |
492 | } | |
493 | ||
494 | /** | |
495 | * ide_pci_setup_ports - configure ports/devices on PCI IDE | |
496 | * @dev: PCI device | |
039788e1 | 497 | * @d: IDE port info |
1da177e4 | 498 | * @pciirq: IRQ line |
8447d9d5 | 499 | * @idx: ATA index table to update |
1da177e4 LT |
500 | * |
501 | * Scan the interfaces attached to this device and do any | |
502 | * necessary per port setup. Attach the devices and ask the | |
503 | * generic DMA layer to do its work for us. | |
504 | * | |
505 | * Normally called automaticall from do_ide_pci_setup_device, | |
506 | * but is also used directly as a helper function by some controllers | |
507 | * where the chipset setup is not the default PCI IDE one. | |
508 | */ | |
8447d9d5 | 509 | |
85620436 | 510 | void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d, int pciirq, u8 *idx) |
1da177e4 | 511 | { |
a5d8c5c8 | 512 | int channels = (d->host_flags & IDE_HFLAG_SINGLE) ? 1 : 2, port; |
1da177e4 | 513 | ide_hwif_t *hwif, *mate = NULL; |
1da177e4 LT |
514 | u8 tmp; |
515 | ||
1da177e4 LT |
516 | /* |
517 | * Set up the IDE ports | |
518 | */ | |
cf6e854e | 519 | |
a5d8c5c8 | 520 | for (port = 0; port < channels; ++port) { |
85620436 BZ |
521 | const ide_pci_enablebit_t *e = &(d->enablebits[port]); |
522 | ||
1da177e4 | 523 | if (e->reg && (pci_read_config_byte(dev, e->reg, &tmp) || |
cf6e854e BZ |
524 | (tmp & e->mask) != e->val)) { |
525 | printk(KERN_INFO "%s: IDE port disabled\n", d->name); | |
1da177e4 | 526 | continue; /* port not enabled */ |
cf6e854e | 527 | } |
1da177e4 | 528 | |
1da177e4 LT |
529 | if ((hwif = ide_hwif_configure(dev, d, mate, port, pciirq)) == NULL) |
530 | continue; | |
531 | ||
8447d9d5 | 532 | *(idx + port) = hwif->index; |
1da177e4 | 533 | |
1da177e4 LT |
534 | if (d->init_iops) |
535 | d->init_iops(hwif); | |
536 | ||
9ffcf364 | 537 | if ((d->host_flags & IDE_HFLAG_NO_DMA) == 0) |
1da177e4 | 538 | ide_hwif_setup_dma(dev, d, hwif); |
9ffcf364 | 539 | |
8acf28c0 BZ |
540 | if ((!hwif->irq && (d->host_flags & IDE_HFLAG_LEGACY_IRQS)) || |
541 | (d->host_flags & IDE_HFLAG_FORCE_LEGACY_IRQS)) | |
3985ee3b BZ |
542 | hwif->irq = port ? 15 : 14; |
543 | ||
6a824c92 | 544 | hwif->host_flags = d->host_flags; |
4099d143 | 545 | hwif->pio_mask = d->pio_mask; |
6a824c92 | 546 | |
1c51361a BZ |
547 | if ((d->host_flags & IDE_HFLAG_SERIALIZE) && hwif->mate) |
548 | hwif->mate->serialized = hwif->serialized = 1; | |
549 | ||
caea7602 BZ |
550 | if (d->host_flags & IDE_HFLAG_IO_32BIT) { |
551 | hwif->drives[0].io_32bit = 1; | |
552 | hwif->drives[1].io_32bit = 1; | |
553 | } | |
554 | ||
555 | if (d->host_flags & IDE_HFLAG_UNMASK_IRQS) { | |
556 | hwif->drives[0].unmask = 1; | |
557 | hwif->drives[1].unmask = 1; | |
558 | } | |
559 | ||
5f8b6c34 BZ |
560 | if (hwif->dma_base) { |
561 | hwif->swdma_mask = d->swdma_mask; | |
562 | hwif->mwdma_mask = d->mwdma_mask; | |
563 | hwif->ultra_mask = d->udma_mask; | |
564 | } | |
565 | ||
85ad93ad BZ |
566 | hwif->drives[0].autotune = 1; |
567 | hwif->drives[1].autotune = 1; | |
568 | ||
272a3709 BZ |
569 | if (d->host_flags & IDE_HFLAG_RQSIZE_256) |
570 | hwif->rqsize = 256; | |
571 | ||
1da177e4 LT |
572 | if (d->init_hwif) |
573 | /* Call chipset-specific routine | |
574 | * for each enabled hwif | |
575 | */ | |
576 | d->init_hwif(hwif); | |
577 | ||
578 | mate = hwif; | |
1da177e4 | 579 | } |
1da177e4 LT |
580 | } |
581 | ||
582 | EXPORT_SYMBOL_GPL(ide_pci_setup_ports); | |
583 | ||
584 | /* | |
585 | * ide_setup_pci_device() looks at the primary/secondary interfaces | |
586 | * on a PCI IDE device and, if they are enabled, prepares the IDE driver | |
587 | * for use with them. This generic code works for most PCI chipsets. | |
588 | * | |
589 | * One thing that is not standardized is the location of the | |
590 | * primary/secondary interface "enable/disable" bits. For chipsets that | |
039788e1 | 591 | * we "know" about, this information is in the struct ide_port_info; |
1da177e4 LT |
592 | * for all other chipsets, we just assume both interfaces are enabled. |
593 | */ | |
039788e1 | 594 | static int do_ide_setup_pci_device(struct pci_dev *dev, |
85620436 | 595 | const struct ide_port_info *d, |
8447d9d5 | 596 | u8 *idx, u8 noisy) |
1da177e4 | 597 | { |
1da177e4 LT |
598 | int tried_config = 0; |
599 | int pciirq, ret; | |
600 | ||
601 | ret = ide_setup_pci_controller(dev, d, noisy, &tried_config); | |
602 | if (ret < 0) | |
603 | goto out; | |
604 | ||
605 | /* | |
606 | * Can we trust the reported IRQ? | |
607 | */ | |
608 | pciirq = dev->irq; | |
609 | ||
610 | /* Is it an "IDE storage" device in non-PCI mode? */ | |
611 | if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE && (dev->class & 5) != 5) { | |
612 | if (noisy) | |
613 | printk(KERN_INFO "%s: not 100%% native mode: " | |
614 | "will probe irqs later\n", d->name); | |
615 | /* | |
616 | * This allows offboard ide-pci cards the enable a BIOS, | |
617 | * verify interrupt settings of split-mirror pci-config | |
618 | * space, place chipset into init-mode, and/or preserve | |
619 | * an interrupt if the card is not native ide support. | |
620 | */ | |
621 | ret = d->init_chipset ? d->init_chipset(dev, d->name) : 0; | |
622 | if (ret < 0) | |
623 | goto out; | |
624 | pciirq = ret; | |
625 | } else if (tried_config) { | |
626 | if (noisy) | |
627 | printk(KERN_INFO "%s: will probe irqs later\n", d->name); | |
628 | pciirq = 0; | |
629 | } else if (!pciirq) { | |
630 | if (noisy) | |
631 | printk(KERN_WARNING "%s: bad irq (%d): will probe later\n", | |
632 | d->name, pciirq); | |
633 | pciirq = 0; | |
634 | } else { | |
635 | if (d->init_chipset) { | |
636 | ret = d->init_chipset(dev, d->name); | |
637 | if (ret < 0) | |
638 | goto out; | |
639 | } | |
640 | if (noisy) | |
1da177e4 LT |
641 | printk(KERN_INFO "%s: 100%% native mode on irq %d\n", |
642 | d->name, pciirq); | |
1da177e4 LT |
643 | } |
644 | ||
645 | /* FIXME: silent failure can happen */ | |
646 | ||
8447d9d5 | 647 | ide_pci_setup_ports(dev, d, pciirq, idx); |
1da177e4 LT |
648 | out: |
649 | return ret; | |
650 | } | |
651 | ||
85620436 | 652 | int ide_setup_pci_device(struct pci_dev *dev, const struct ide_port_info *d) |
1da177e4 | 653 | { |
8447d9d5 | 654 | u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; |
1da177e4 LT |
655 | int ret; |
656 | ||
8447d9d5 | 657 | ret = do_ide_setup_pci_device(dev, d, &idx[0], 1); |
1da177e4 | 658 | |
8447d9d5 BZ |
659 | if (ret >= 0) |
660 | ide_device_add(idx); | |
1da177e4 | 661 | |
1da177e4 LT |
662 | return ret; |
663 | } | |
664 | ||
665 | EXPORT_SYMBOL_GPL(ide_setup_pci_device); | |
666 | ||
667 | int ide_setup_pci_devices(struct pci_dev *dev1, struct pci_dev *dev2, | |
85620436 | 668 | const struct ide_port_info *d) |
1da177e4 LT |
669 | { |
670 | struct pci_dev *pdev[] = { dev1, dev2 }; | |
1da177e4 | 671 | int ret, i; |
8447d9d5 | 672 | u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; |
1da177e4 LT |
673 | |
674 | for (i = 0; i < 2; i++) { | |
8447d9d5 | 675 | ret = do_ide_setup_pci_device(pdev[i], d, &idx[i*2], !i); |
1da177e4 LT |
676 | /* |
677 | * FIXME: Mom, mom, they stole me the helper function to undo | |
678 | * do_ide_setup_pci_device() on the first device! | |
679 | */ | |
680 | if (ret < 0) | |
681 | goto out; | |
682 | } | |
683 | ||
8447d9d5 | 684 | ide_device_add(idx); |
1da177e4 LT |
685 | out: |
686 | return ret; | |
687 | } | |
688 | ||
689 | EXPORT_SYMBOL_GPL(ide_setup_pci_devices); |