projects / deliverable / linux.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
V4L/DVB: Support or LME2510(C) DM04/QQBOX USB DVB-S BOXES
[deliverable/linux.git] / drivers / media / dvb / dvb-usb / lmedm04.c
CommitLineData
d2f918bb
MP		 1/* DVB USB compliant linux driver for
2 *
3 * DM04/QQBOX DVB-S USB BOX LME2510C + SHARP:BS2F7HZ7395
4 * LME2510 + LGTDQT-P001F
5 *
6 * MVB7395 (LME2510C+SHARP:BS2F7HZ7395)
7 * SHARP:BS2F7HZ7395 = (STV0288+Sharp IX2505V)
8 *
9 * MV001F (LME2510 +LGTDQY-P001F)
10 * LG TDQY - P001F =(TDA8263 + TDA10086H)
11 *
12 * For firmware see Documentation/dvb/lmedm04.txt
13 *
14 * I2C addresses:
15 * 0xd0 - STV0288 - Demodulator
16 * 0xc0 - Sharp IX2505V - Tuner
17 * --or--
18 * 0x1c - TDA10086 - Demodulator
19 * 0xc0 - TDA8263 - Tuner
20 *
21 * ***Please Note***
22 * There are other variants of the DM04
23 * ***NOT SUPPORTED***
24 * MVB0001F (LME2510C+LGTDQT-P001F)
25 * MV0194 (LME2510+SHARP0194)
26 * MVB0194 (LME2510C+SHARP0194)
27 *
28 *
29 * VID = 3344 PID LME2510=1122 LME2510C=1120
30 *
31 * Copyright (C) 2010 Malcolm Priestley (tvboxspy@gmail.com)
32 * LME2510(C)(C) Leaguerme (Shenzhen) MicroElectronics Co., Ltd.
33 *
34 * This program is free software; you can redistribute it and/or modify
35 * it under the terms of the GNU General Public License Version 2, as
36 * published by the Free Software Foundation.
37 *
38 * This program is distributed in the hope that it will be useful,
39 * but WITHOUT ANY WARRANTY; without even the implied warranty of
40 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
41 * GNU General Public License for more details.
42 *
43 * You should have received a copy of the GNU General Public License
44 * along with this program; if not, write to the Free Software
45 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
46 *
47 *
48 * see Documentation/dvb/README.dvb-usb for more information
49 *
50 * Known Issues :
51 * LME2510: Non Intel USB chipsets fail to maintain High Speed on
52 * Boot or Hot Plug.
53 *
54 * DiSEqC functions are not fully supported in this driver. The main
55 * reason is the frontend is cut off during streaming. Allowing frontend
56 * access will stall the driver. Applications that attempt to this, the
57 * commands are ignored.
58 *
59 * PID functions have been removed from this driver version due to
60 * problems with different firmware and application versions.
61 */
62#define DVB_USB_LOG_PREFIX "LME2510(C)"
63#include <linux/usb.h>
64#include <linux/usb/input.h>
65#include <media/ir-core.h>
66
67#include "dvb-usb.h"
68#include "lmedm04.h"
69#include "tda826x.h"
70#include "tda10086.h"
71#include "stv0288.h"
72#include "ix2505v.h"
73
74
75
76/* debug */
77static int dvb_usb_lme2510_debug;
78#define l_dprintk(var, level, args...) do { \
79 if ((var >= level)) \
80 printk(KERN_DEBUG DVB_USB_LOG_PREFIX ": " args); \
81} while (0)
82
83#define deb_info(level, args...) l_dprintk(dvb_usb_lme2510_debug, level, args)
84#define debug_data_snipet(level, name, p) \
85 deb_info(level, name" (%02x%02x%02x%02x%02x%02x%02x%02x)", \
86 *p, *(p+1), *(p+2), *(p+3), *(p+4), \
87 *(p+5), *(p+6), *(p+7));
88
89
90module_param_named(debug, dvb_usb_lme2510_debug, int, 0644);
91MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able))."
92 DVB_USB_DEBUG_STATUS);
93
94DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
95#define TUNER_LG 0x1
96#define TUNER_S7395 0x2
97
98struct lme2510_state {
99 u8 id;
100 u8 tuner_config;
101 u8 signal_lock;
102 u8 signal_level;
103 u8 signal_sn;
104 u8 time_key;
105 u8 i2c_talk_onoff;
106 u8 i2c_gate;
107 u8 i2c_tuner_gate_w;
108 u8 i2c_tuner_gate_r;
109 u8 i2c_tuner_addr;
110 void *buffer;
111 struct urb *lme_urb;
112 void *usb_buffer;
113
114};
115
116static int lme2510_bulk_write(struct usb_device *dev,
117 u8 *snd, int len, u8 pipe)
118{
119 int ret, actual_l;
120 ret = usb_bulk_msg(dev, usb_sndbulkpipe(dev, pipe),
121 snd, len , &actual_l, 500);
122 return ret;
123}
124
125static int lme2510_bulk_read(struct usb_device *dev,
126 u8 *rev, int len, u8 pipe)
127{
128 int ret, actual_l;
129
130 ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, pipe),
131 rev, len , &actual_l, 500);
132 return ret;
133}
134
135static int lme2510_usb_talk(struct dvb_usb_device *d,
136 u8 *wbuf, int wlen, u8 *rbuf, int rlen)
137{
138 struct lme2510_state *st = d->priv;
139 u8 *buff;
140 int ret = 0;
141
142 if (st->usb_buffer == NULL) {
143 st->usb_buffer = kmalloc(512, GFP_KERNEL);
144 if (st->usb_buffer == NULL) {
145 info("MEM Error no memory");
146 return -ENOMEM;
147 }
148 }
149 buff = st->usb_buffer;
150
151 /* the read/write capped at 512 */
152 memcpy(buff, wbuf, (wlen > 512) ? 512 : wlen);
153
154
155 ret = mutex_lock_interruptible(&d->usb_mutex);
156
157 if (ret < 0)
158 return -EAGAIN;
159
160 ret |= usb_clear_halt(d->udev, usb_sndbulkpipe(d->udev, 0x01));
161 msleep(5);
162 ret |= lme2510_bulk_write(d->udev, buff, wlen , 0x1);
163
164 msleep(5);
165 ret |= usb_clear_halt(d->udev, usb_rcvbulkpipe(d->udev, 0x1));
166
167 msleep(5);
168 ret |= lme2510_bulk_read(d->udev, buff, (rlen > 512) ?
169 512 : rlen , 0x1);
170
171 if (rlen > 0)
172 memcpy(rbuf, buff, rlen);
173
174 mutex_unlock(&d->usb_mutex);
175
176 return (ret < 0) ? -ENODEV : 0;
177}
178
179static int lme2510_remote_keypress(struct dvb_usb_adapter *adap, u16 keypress)
180{
181 struct dvb_usb_device *d = adap->dev;
182
183 deb_info(1, "INT Key Keypress =%04x", keypress);
184
185 if (keypress > 0)
186 ir_keydown(d->rc_input_dev, keypress, 0);
187
188 return 0;
189}
190
191static void lme2510_int_response(struct urb *lme_urb)
192{
193 struct dvb_usb_adapter *adap = lme_urb->context;
194 struct lme2510_state *st = adap->dev->priv;
195 static u8 *ibuf, *rbuf;
196 int i = 0, offset;
197
198 switch (lme_urb->status) {
199 case 0:
200 case -ETIMEDOUT:
201 break;
202 case -ECONNRESET:
203 case -ENOENT:
204 case -ESHUTDOWN:
205 return;
206 default:
207 info("Error %x", lme_urb->status);
208 break;
209 }
210
211 rbuf = (u8 *) lme_urb->transfer_buffer;
212
213 offset = ((lme_urb->actual_length/8) > 4)
214 ? 4 : (lme_urb->actual_length/8) ;
215
216
217 for (i = 0; i < offset; ++i) {
218 ibuf = (u8 *)&rbuf[i*8];
219 deb_info(5, "INT O/S C =%02x C/O=%02x Type =%02x%02x",
220 offset, i, ibuf[0], ibuf[1]);
221
222 switch (ibuf[0]) {
223 case 0xaa:
224 debug_data_snipet(1, "INT Remote data snipet in", ibuf);
225 lme2510_remote_keypress(adap,
226 (u16)(ibuf[4]<<8)+ibuf[5]);
227 break;
228 case 0xbb:
229 switch (st->tuner_config) {
230 case TUNER_LG:
231 st->signal_lock = ibuf[2];
232 st->signal_level = ibuf[4];
233 st->signal_sn = ibuf[3];
234 st->time_key = ibuf[7];
235 break;
236 case TUNER_S7395:
237 /* Tweak for earlier firmware*/
238 if (ibuf[1] == 0x03) {
239 st->signal_level = ibuf[3];
240 st->signal_sn = ibuf[2];
241 } else {
242 st->signal_level = ibuf[4];
243 st->signal_sn = ibuf[5];
244 }
245 break;
246 default:
247 break;
248 }
249 debug_data_snipet(5, "INT Remote data snipet in", ibuf);
250 break;
251 case 0xcc:
252 debug_data_snipet(1, "INT Control data snipet", ibuf);
253 break;
254 default:
255 debug_data_snipet(1, "INT Unknown data snipet", ibuf);
256 break;
257 }
258 }
259 usb_submit_urb(lme_urb, GFP_ATOMIC);
260}
261
262static int lme2510_int_read(struct dvb_usb_adapter *adap)
263{
264 struct lme2510_state *lme_int = adap->dev->priv;
265
266 lme_int->lme_urb = usb_alloc_urb(0, GFP_ATOMIC);
267
268 if (lme_int->lme_urb == NULL)
269 return -ENOMEM;
270
271 lme_int->buffer = usb_alloc_coherent(adap->dev->udev, 5000, GFP_ATOMIC,
272 &lme_int->lme_urb->transfer_dma);
273
274 if (lme_int->buffer == NULL)
275 return -ENOMEM;
276
277 usb_fill_int_urb(lme_int->lme_urb,
278 adap->dev->udev,
279 usb_rcvintpipe(adap->dev->udev, 0xa),
280 lme_int->buffer,
281 4096,
282 lme2510_int_response,
283 adap,
284 11);
285
286 lme_int->lme_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
287
288 usb_submit_urb(lme_int->lme_urb, GFP_ATOMIC);
289 info("INT Interupt Service Started");
290
291 return 0;
292}
293
294static int lme2510_return_status(struct usb_device *dev)
295{
296 int ret = 0;
297 u8 data[10] = {0};
298 ret |= usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
299 0x06, 0x80, 0x0302, 0x00, data, 0x0006, 200);
300 info("Firmware Status: %x (%x)", ret , data[2]);
301
302 return (ret < 0) ? -ENODEV : data[2];
303}
304
305static int lme2510_msg(struct dvb_usb_device *d,
306 u8 *wbuf, int wlen, u8 *rbuf, int rlen)
307{
308 int ret = 0;
309 struct lme2510_state *st = d->priv;
310
311 if (st->i2c_talk_onoff == 1) {
312 if ((wbuf[2] == 0x1c) & (wbuf[3] == 0x0e))
313 msleep(80); /*take your time when waiting for tune*/
314
315 if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
316 return -EAGAIN;
317
318 ret = lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen);
319
320 mutex_unlock(&d->i2c_mutex);
321 switch (st->tuner_config) {
322 case TUNER_S7395:
323 if (wbuf[3] == 0x24)
324 st->signal_lock = rbuf[1];
325 break;
326 default:
327 break;
328 }
329
330 } else {
331 switch (st->tuner_config) {
332 case TUNER_LG:
333 switch (wbuf[3]) {
334 case 0x0e:
335 rbuf[0] = 0x55;
336 rbuf[1] = st->signal_lock;
337 break;
338 case 0x43:
339 rbuf[0] = 0x55;
340 rbuf[1] = st->signal_level;
341 break;
342 case 0x1c:
343 rbuf[0] = 0x55;
344 rbuf[1] = st->signal_sn;
345 break;
346 default:
347 break;
348 }
349 break;
350 case TUNER_S7395:
351 switch (wbuf[3]) {
352 case 0x10:
353 rbuf[0] = 0x55;
354 rbuf[1] = (st->signal_level & 0x80)
355 ? 0 : (st->signal_level * 2);
356 break;
357 case 0x2d:
358 rbuf[0] = 0x55;
359 rbuf[1] = st->signal_sn;
360 break;
361 case 0x24:
362 rbuf[0] = 0x55;
363 rbuf[1] = (st->signal_level & 0x80)
364 ? 0 : st->signal_lock;
365 default:
366 break;
367 }
368 break;
369 default:
370 break;
371
372 }
373
374 deb_info(4, "I2C From Interupt Message out(%02x) in(%02x)",
375 wbuf[3], rbuf[1]);
376
377 }
378
379 return ret;
380}
381
382
383static int lme2510_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
384 int num)
385{
386 struct dvb_usb_device *d = i2c_get_adapdata(adap);
387 struct lme2510_state *st = d->priv;
388 static u8 obuf[64], ibuf[512];
389 int i, read, read_o;
390 u16 len;
391 u8 gate = st->i2c_gate;
392
393 if (gate == 0)
394 gate = 5;
395
396 if (num > 2)
397 warn("more than 2 i2c messages"
398 "at a time is not handled yet. TODO.");
399
400 for (i = 0; i < num; i++) {
401 read_o = 1 & (msg[i].flags & I2C_M_RD);
402 read = i+1 < num && (msg[i+1].flags & I2C_M_RD);
403 read |= read_o;
404 gate = (msg[i].addr == st->i2c_tuner_addr)
405 ? (read) ? st->i2c_tuner_gate_r
406 : st->i2c_tuner_gate_w
407 : st->i2c_gate;
408 obuf[0] = gate | (read << 7);
409
410 if (gate == 5)
411 obuf[1] = (read) ? 2 : msg[i].len + 1;
412 else
413 obuf[1] = msg[i].len + read + 1;
414
415 obuf[2] = msg[i].addr;
416 if (read) {
417 if (read_o)
418 len = 3;
419 else {
420 memcpy(&obuf[3], msg[i].buf, msg[i].len);
421 obuf[msg[i].len+3] = msg[i+1].len;
422 len = msg[i].len+4;
423 }
424 } else {
425 memcpy(&obuf[3], msg[i].buf, msg[i].len);
426 len = msg[i].len+3;
427 }
428
429 if (lme2510_msg(d, obuf, len, ibuf, 512) < 0) {
430 deb_info(1, "i2c transfer failed.");
431 return -EAGAIN;
432 }
433
434 if (read) {
435 if (read_o)
436 memcpy(msg[i].buf, &ibuf[1], msg[i].len);
437 else {
438 memcpy(msg[i+1].buf, &ibuf[1], msg[i+1].len);
439 i++;
440 }
441 }
442 }
443 return i;
444}
445
446static u32 lme2510_i2c_func(struct i2c_adapter *adapter)
447{
448 return I2C_FUNC_I2C;
449}
450
451static struct i2c_algorithm lme2510_i2c_algo = {
452 .master_xfer = lme2510_i2c_xfer,
453 .functionality = lme2510_i2c_func,
454};
455
456/* Callbacks for DVB USB */
457static int lme2510_identify_state(struct usb_device *udev,
458 struct dvb_usb_device_properties *props,
459 struct dvb_usb_device_description **desc,
460 int *cold)
461{
462 if (lme2510_return_status(udev) == 0x44)
463 *cold = 1;
464 else
465 *cold = 0;
466 return 0;
467}
468
469static int lme2510_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
470{
471 struct lme2510_state *st = adap->dev->priv;
472 static u8 reset[] = LME_RESET;
473 static u8 stream_on[] = LME_ST_ON_W;
474 static u8 clear_reg_3[] = LME_CLEAR_PID;
475 static u8 rbuf[1];
476 int ret = 0, len = 2, rlen = sizeof(rbuf);
477
478 deb_info(1, "STM (%02x)", onoff);
479
480 if (onoff == 1) {
481 st->i2c_talk_onoff = 0;
482 msleep(400); /* give enough time for i2c to stop */
483 ret |= lme2510_usb_talk(adap->dev,
484 stream_on, len, rbuf, rlen);
485 } else {
486 deb_info(1, "STM Steam Off");
487 if (st->tuner_config == TUNER_LG)
488 ret |= lme2510_usb_talk(adap->dev, clear_reg_3,
489 sizeof(clear_reg_3), rbuf, rlen);
490 else
491 ret |= lme2510_usb_talk(adap->dev,
492 reset, sizeof(reset), rbuf, rlen);
493
494 msleep(400);
495 st->i2c_talk_onoff = 1;
496 }
497
498 return (ret < 0) ? -ENODEV : 0;
499}
500
501static int lme2510_int_service(struct dvb_usb_adapter *adap)
502{
503 struct dvb_usb_device *d = adap->dev;
504 struct input_dev *input_dev;
505 char *ir_codes = RC_MAP_LME2510;
506 int ret = 0;
507
508 info("STA Configuring Remote");
509
510 usb_make_path(d->udev, d->rc_phys, sizeof(d->rc_phys));
511
512 strlcat(d->rc_phys, "/ir0", sizeof(d->rc_phys));
513
514 input_dev = input_allocate_device();
515 if (!input_dev)
516 return -ENOMEM;
517
518 input_dev->name = "LME2510 Remote Control";
519 input_dev->phys = d->rc_phys;
520
521 usb_to_input_id(d->udev, &input_dev->id);
522
523 ret |= ir_input_register(input_dev, ir_codes, NULL, "LME 2510");
524
525 if (ret) {
526 input_free_device(input_dev);
527 return ret;
528 }
529
530 d->rc_input_dev = input_dev;
531 /* Start the Interupt */
532 ret = lme2510_int_read(adap);
533
534 if (ret < 0) {
535 ir_input_unregister(input_dev);
536 input_free_device(input_dev);
537 }
538 return (ret < 0) ? -ENODEV : 0;
539}
540
541static u8 check_sum(u8 *p, u8 len)
542{
543 u8 sum = 0;
544 while (len--)
545 sum += *p++;
546 return sum;
547}
548
549static int lme2510_download_firmware(struct usb_device *dev,
550 const struct firmware *fw)
551{
552 int ret = 0;
553 u8 data[512] = {0};
554 u16 j, wlen, len_in, start, end;
555 u8 packet_size, dlen, i;
556 u8 *fw_data;
557
558 packet_size = 0x31;
559 len_in = 1;
560
561
562 info("FRM Starting Firmware Download");
563
564 for (i = 1; i < 3; i++) {
565 start = (i == 1) ? 0 : 512;
566 end = (i == 1) ? 512 : fw->size;
567 for (j = start; j < end; j += (packet_size+1)) {
568 fw_data = (u8 *)(fw->data + j);
569 if ((end - j) > packet_size) {
570 data[0] = i;
571 dlen = packet_size;
572 } else {
573 data[0] = i | 0x80;
574 dlen = (u8)(end - j)-1;
575 }
576 data[1] = dlen;
577 memcpy(&data[2], fw_data, dlen+1);
578 wlen = (u8) dlen + 4;
579 data[wlen-1] = check_sum(fw_data, dlen+1);
580 deb_info(1, "Data S=%02x:E=%02x CS= %02x", data[3],
581 data[dlen+2], data[dlen+3]);
582 ret |= lme2510_bulk_write(dev, data, wlen, 1);
583 ret |= lme2510_bulk_read(dev, data, len_in , 1);
584 ret |= (data[0] == 0x88) ? 0 : -1;
585 }
586 }
587 usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
588 0x06, 0x80, 0x0200, 0x00, data, 0x0109, 1000);
589
590
591 data[0] = 0x8a;
592 len_in = 1;
593 msleep(2000);
594 ret |= lme2510_bulk_write(dev, data , len_in, 1); /*Resetting*/
595 ret |= lme2510_bulk_read(dev, data, len_in, 1);
596 msleep(400);
597
598 if (ret < 0)
599 info("FRM Firmware Download Failed (%04x)" , ret);
600 else
601 info("FRM Firmware Download Completed - Resetting Device");
602
603
604 return (ret < 0) ? -ENODEV : 0;
605}
606
607
608static int lme2510_kill_urb(struct usb_data_stream *stream)
609{
610 int i;
611 for (i = 0; i < stream->urbs_submitted; i++) {
612 deb_info(3, "killing URB no. %d.", i);
613
614 /* stop the URB */
615 usb_kill_urb(stream->urb_list[i]);
616 }
617 stream->urbs_submitted = 0;
618 return 0;
619}
620
621static struct tda10086_config tda10086_config = {
622 .demod_address = 0x1c,
623 .invert = 0,
624 .diseqc_tone = 1,
625 .xtal_freq = TDA10086_XTAL_16M,
626};
627
628static struct stv0288_config lme_config = {
629 .demod_address = 0xd0,
630 .min_delay_ms = 15,
631 .inittab = s7395_inittab,
632};
633
634static struct ix2505v_config lme_tuner = {
635 .tuner_address = 0xc0,
636 .min_delay_ms = 100,
637 .tuner_gain = 0x0,
638 .tuner_chargepump = 0x3,
639};
640
641
642static int dm04_lme2510_set_voltage(struct dvb_frontend *fe,
643 fe_sec_voltage_t voltage)
644{
645 struct dvb_usb_adapter *adap = fe->dvb->priv;
646 struct lme2510_state *st = adap->dev->priv;
647 static u8 voltage_low[] = LME_VOLTAGE_L;
648 static u8 voltage_high[] = LME_VOLTAGE_H;
649 static u8 reset[] = LME_RESET;
650 static u8 clear_reg_3[] = LME_CLEAR_PID;
651 static u8 rbuf[1];
652 int ret = 0, len = 3, rlen = 1;
653
654 msleep(100);
655
656 if (st->tuner_config == TUNER_LG)
657 ret |= lme2510_usb_talk(adap->dev, clear_reg_3,
658 sizeof(clear_reg_3), rbuf, rlen);
659 else
660 ret |= lme2510_usb_talk(adap->dev,
661 reset, sizeof(reset), rbuf, rlen);
662
663 /*always check & stop streaming*/
664 lme2510_kill_urb(&adap->stream);
665 adap->feedcount = 0;
666
667 switch (voltage) {
668
669 case SEC_VOLTAGE_18:
670 ret |= lme2510_usb_talk(adap->dev,
671 voltage_high, len, rbuf, rlen);
672 break;
673
674 case SEC_VOLTAGE_OFF:
675 case SEC_VOLTAGE_13:
676 default:
677 ret |= lme2510_usb_talk(adap->dev,
678 voltage_low, len, rbuf, rlen);
679 break;
680
681
682 };
683 st->i2c_talk_onoff = 1;
684 return (ret < 0) ? -ENODEV : 0;
685}
686
687static int dm04_lme2510_frontend_attach(struct dvb_usb_adapter *adap)
688{
689 int ret = 0;
690 struct lme2510_state *st = adap->dev->priv;
691
692 /* Interupt Start */
693 ret = lme2510_int_service(adap);
694 if (ret < 0) {
695 info("INT Unable to start Interupt Service");
696 return -ENODEV;
697 }
698
699 st->i2c_talk_onoff = 1;
700 st->i2c_gate = 4;
701
702 adap->fe = dvb_attach(tda10086_attach, &tda10086_config,
703 &adap->dev->i2c_adap);
704
705 if (adap->fe) {
706 info("TUN Found Frontend TDA10086");
707 memcpy(&adap->fe->ops.info.name,
708 &"DM04_LG_TDQY-P001F DVB-S", 24);
709 adap->fe->ops.set_voltage = dm04_lme2510_set_voltage;
710 st->i2c_tuner_gate_w = 4;
711 st->i2c_tuner_gate_r = 4;
712 st->i2c_tuner_addr = 0xc0;
713 if (dvb_attach(tda826x_attach, adap->fe, 0xc0,
714 &adap->dev->i2c_adap, 1)) {
715 info("TUN TDA8263 Found");
716 st->tuner_config = TUNER_LG;
717 return 0;
718 }
719 kfree(adap->fe);
720 adap->fe = NULL;
721 }
722 st->i2c_gate = 5;
723 adap->fe = dvb_attach(stv0288_attach, &lme_config,
724 &adap->dev->i2c_adap);
725
726 if (adap->fe) {
727 info("FE Found Stv0288");
728 memcpy(&adap->fe->ops.info.name,
729 &"DM04_SHARP:BS2F7HZ7395", 22);
730 adap->fe->ops.set_voltage = dm04_lme2510_set_voltage;
731 st->i2c_tuner_gate_w = 4;
732 st->i2c_tuner_gate_r = 5;
733 st->i2c_tuner_addr = 0xc0;
734 if (dvb_attach(ix2505v_attach , adap->fe, &lme_tuner,
735 &adap->dev->i2c_adap)) {
736 st->tuner_config = TUNER_S7395;
737 info("TUN Sharp IX2505V silicon tuner");
738 return 0;
739 }
740 kfree(adap->fe);
741 adap->fe = NULL;
742 }
743
744 info("DM04 Not Supported");
745 return -ENODEV;
746}
747
748static int lme2510_powerup(struct dvb_usb_device *d, int onoff)
749{
750 struct lme2510_state *st = d->priv;
751 st->i2c_talk_onoff = 1;
752 return 0;
753}
754
755/* DVB USB Driver stuff */
756static struct dvb_usb_device_properties lme2510_properties;
757static struct dvb_usb_device_properties lme2510c_properties;
758
759static int lme2510_probe(struct usb_interface *intf,
760 const struct usb_device_id *id)
761{
762 struct usb_device *udev = interface_to_usbdev(intf);
763 int ret = 0;
764
765 usb_reset_configuration(udev);
766
767 usb_set_interface(udev, intf->cur_altsetting->desc.bInterfaceNumber, 1);
768
769 if (udev->speed != USB_SPEED_HIGH) {
770 ret = usb_reset_device(udev);
771 info("DEV Failed to connect in HIGH SPEED mode");
772 return -ENODEV;
773 }
774
775 if (0 == dvb_usb_device_init(intf, &lme2510_properties,
776 THIS_MODULE, NULL, adapter_nr)) {
777 info("DEV registering device driver");
778 return 0;
779 }
780 if (0 == dvb_usb_device_init(intf, &lme2510c_properties,
781 THIS_MODULE, NULL, adapter_nr)) {
782 info("DEV registering device driver");
783 return 0;
784 }
785
786 info("DEV lme2510 Error");
787 return -ENODEV;
788
789}
790
791static struct usb_device_id lme2510_table[] = {
792 { USB_DEVICE(0x3344, 0x1122) }, /* LME2510 */
793 { USB_DEVICE(0x3344, 0x1120) }, /* LME2510C */
794 {} /* Terminating entry */
795};
796
797MODULE_DEVICE_TABLE(usb, lme2510_table);
798
799static struct dvb_usb_device_properties lme2510_properties = {
800 .caps = DVB_USB_IS_AN_I2C_ADAPTER,
801 .usb_ctrl = DEVICE_SPECIFIC,
802 .download_firmware = lme2510_download_firmware,
803 .firmware = "dvb-usb-lme2510-lg.fw",
804
805 .size_of_priv = sizeof(struct lme2510_state),
806 .num_adapters = 1,
807 .adapter = {
808 {
809 .streaming_ctrl = lme2510_streaming_ctrl,
810 .frontend_attach = dm04_lme2510_frontend_attach,
811 /* parameter for the MPEG2-data transfer */
812 .stream = {
813 .type = USB_BULK,
814 .count = 10,
815 .endpoint = 0x06,
816 .u = {
817 .bulk = {
818 .buffersize = 4096,
819
820 }
821 }
822 }
823 }
824 },
825 .power_ctrl = lme2510_powerup,
826 .identify_state = lme2510_identify_state,
827 .i2c_algo = &lme2510_i2c_algo,
828 .generic_bulk_ctrl_endpoint = 0,
829 .num_device_descs = 1,
830 .devices = {
831 { "DM04 LME2510 DVB-S USB 2.0",
832 { &lme2510_table[0], NULL },
833 },
834
835 }
836};
837
838static struct dvb_usb_device_properties lme2510c_properties = {
839 .caps = DVB_USB_IS_AN_I2C_ADAPTER,
840 .usb_ctrl = DEVICE_SPECIFIC,
841 .download_firmware = lme2510_download_firmware,
842 .firmware = "dvb-usb-lme2510c-s7395.fw",
843 .size_of_priv = sizeof(struct lme2510_state),
844 .num_adapters = 1,
845 .adapter = {
846 {
847 .streaming_ctrl = lme2510_streaming_ctrl,
848 .frontend_attach = dm04_lme2510_frontend_attach,
849 /* parameter for the MPEG2-data transfer */
850 .stream = {
851 .type = USB_BULK,
852 .count = 8,
853 .endpoint = 0x8,
854 .u = {
855 .bulk = {
856 .buffersize = 4096,
857
858 }
859 }
860 }
861 }
862 },
863 .power_ctrl = lme2510_powerup,
864 .identify_state = lme2510_identify_state,
865 .i2c_algo = &lme2510_i2c_algo,
866 .generic_bulk_ctrl_endpoint = 0,
867 .num_device_descs = 1,
868 .devices = {
869 { "DM04 LME2510C USB2.0",
870 { &lme2510_table[1], NULL },
871 },
872 }
873};
874
875void lme2510_exit_int(struct dvb_usb_device *d)
876{
877 struct lme2510_state *st = d->priv;
878 if (st->lme_urb != NULL) {
879 st->i2c_talk_onoff = 0;
880 st->signal_lock = 0;
881 st->signal_level = 0;
882 st->signal_sn = 0;
883 kfree(st->usb_buffer);
884 usb_kill_urb(st->lme_urb);
885 usb_free_coherent(d->udev, 5000, st->buffer,
886 st->lme_urb->transfer_dma);
887 info("Interupt Service Stopped");
888 ir_input_unregister(d->rc_input_dev);
889 info("Remote Stopped");
890 }
891 return;
892}
893
894void lme2510_exit(struct usb_interface *intf)
895{
896 struct dvb_usb_device *d = usb_get_intfdata(intf);
897 if (d != NULL) {
898 d->adapter[0].feedcount = 0;
899 lme2510_exit_int(d);
900 dvb_usb_device_exit(intf);
901 }
902
903}
904
905static struct usb_driver lme2510_driver = {
906 .name = "LME2510C_DVBS",
907 .probe = lme2510_probe,
908 .disconnect = lme2510_exit,
909 .id_table = lme2510_table,
910};
911
912/* module stuff */
913static int __init lme2510_module_init(void)
914{
915 int result = usb_register(&lme2510_driver);
916 if (result) {
917 err("usb_register failed. Error number %d", result);
918 return result;
919 }
920
921 return 0;
922}
923
924static void __exit lme2510_module_exit(void)
925{
926 /* deregister this driver from the USB subsystem */
927 usb_deregister(&lme2510_driver);
928}
929
930module_init(lme2510_module_init);
931module_exit(lme2510_module_exit);
932
933MODULE_AUTHOR("Malcolm Priestley <tvboxspy@gmail.com>");
934MODULE_DESCRIPTION("LM2510(C) DVB-S USB2.0");
935MODULE_VERSION("1.4");
936MODULE_LICENSE("GPL");
Linux kernel - Deliverables
This page took 0.057598 seconds and 5 git commands to generate.