Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * budget-av.c: driver for the SAA7146 based Budget DVB cards | |
3 | * with analog video in | |
4 | * | |
5 | * Compiled from various sources by Michael Hunold <michael@mihu.de> | |
6 | * | |
7 | * CI interface support (c) 2004 Olivier Gournet <ogournet@anevia.com> & | |
8 | * Andrew de Quincey <adq_dvb@lidskialf.net> | |
9 | * | |
10 | * Copyright (C) 2002 Ralph Metzler <rjkm@metzlerbros.de> | |
11 | * | |
12 | * Copyright (C) 1999-2002 Ralph Metzler | |
13 | * & Marcus Metzler for convergence integrated media GmbH | |
14 | * | |
15 | * This program is free software; you can redistribute it and/or | |
16 | * modify it under the terms of the GNU General Public License | |
17 | * as published by the Free Software Foundation; either version 2 | |
18 | * of the License, or (at your option) any later version. | |
19 | * | |
20 | * | |
21 | * This program is distributed in the hope that it will be useful, | |
22 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
23 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
24 | * GNU General Public License for more details. | |
25 | * | |
26 | * | |
27 | * You should have received a copy of the GNU General Public License | |
28 | * along with this program; if not, write to the Free Software | |
29 | * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. | |
30 | * Or, point your browser to http://www.gnu.org/copyleft/gpl.html | |
31 | * | |
32 | * | |
33 | * the project's page is at http://www.linuxtv.org/dvb/ | |
34 | */ | |
35 | ||
36 | #include "budget.h" | |
37 | #include "stv0299.h" | |
38 | #include "tda10021.h" | |
39 | #include "tda1004x.h" | |
1c72cfdc | 40 | #include "tua6100.h" |
f8bf134d | 41 | #include "dvb-pll.h" |
1da177e4 LT |
42 | #include <media/saa7146_vv.h> |
43 | #include <linux/module.h> | |
44 | #include <linux/errno.h> | |
45 | #include <linux/slab.h> | |
46 | #include <linux/interrupt.h> | |
47 | #include <linux/input.h> | |
48 | #include <linux/spinlock.h> | |
49 | ||
50 | #include "dvb_ca_en50221.h" | |
51 | ||
52 | #define DEBICICAM 0x02420000 | |
53 | ||
5c1208ba AQ |
54 | #define SLOTSTATUS_NONE 1 |
55 | #define SLOTSTATUS_PRESENT 2 | |
56 | #define SLOTSTATUS_RESET 4 | |
57 | #define SLOTSTATUS_READY 8 | |
58 | #define SLOTSTATUS_OCCUPIED (SLOTSTATUS_PRESENT|SLOTSTATUS_RESET|SLOTSTATUS_READY) | |
59 | ||
1da177e4 LT |
60 | struct budget_av { |
61 | struct budget budget; | |
62 | struct video_device *vd; | |
63 | int cur_input; | |
64 | int has_saa7113; | |
65 | struct tasklet_struct ciintf_irq_tasklet; | |
66 | int slot_status; | |
67 | struct dvb_ca_en50221 ca; | |
5c1208ba AQ |
68 | u8 reinitialise_demod:1; |
69 | u8 tda10021_poclkp:1; | |
70 | u8 tda10021_ts_enabled; | |
71 | int (*tda10021_set_frontend)(struct dvb_frontend *fe, struct dvb_frontend_parameters *p); | |
1da177e4 LT |
72 | }; |
73 | ||
5c1208ba AQ |
74 | static int ciintf_slot_shutdown(struct dvb_ca_en50221 *ca, int slot); |
75 | ||
76 | ||
86f40cc3 AQ |
77 | /* GPIO Connections: |
78 | * 0 - Vcc/Reset (Reset is controlled by capacitor). Resets the frontend *AS WELL*! | |
79 | * 1 - CI memory select 0=>IO memory, 1=>Attribute Memory | |
80 | * 2 - CI Card Enable (Active Low) | |
81 | * 3 - CI Card Detect | |
b82a96a7 | 82 | */ |
1da177e4 LT |
83 | |
84 | /**************************************************************************** | |
85 | * INITIALIZATION | |
86 | ****************************************************************************/ | |
87 | ||
88 | static u8 i2c_readreg(struct i2c_adapter *i2c, u8 id, u8 reg) | |
89 | { | |
90 | u8 mm1[] = { 0x00 }; | |
91 | u8 mm2[] = { 0x00 }; | |
92 | struct i2c_msg msgs[2]; | |
93 | ||
94 | msgs[0].flags = 0; | |
95 | msgs[1].flags = I2C_M_RD; | |
96 | msgs[0].addr = msgs[1].addr = id / 2; | |
97 | mm1[0] = reg; | |
98 | msgs[0].len = 1; | |
99 | msgs[1].len = 1; | |
100 | msgs[0].buf = mm1; | |
101 | msgs[1].buf = mm2; | |
102 | ||
103 | i2c_transfer(i2c, msgs, 2); | |
104 | ||
105 | return mm2[0]; | |
106 | } | |
107 | ||
108 | static int i2c_readregs(struct i2c_adapter *i2c, u8 id, u8 reg, u8 * buf, u8 len) | |
109 | { | |
110 | u8 mm1[] = { reg }; | |
111 | struct i2c_msg msgs[2] = { | |
112 | {.addr = id / 2,.flags = 0,.buf = mm1,.len = 1}, | |
113 | {.addr = id / 2,.flags = I2C_M_RD,.buf = buf,.len = len} | |
114 | }; | |
115 | ||
116 | if (i2c_transfer(i2c, msgs, 2) != 2) | |
117 | return -EIO; | |
118 | ||
119 | return 0; | |
120 | } | |
121 | ||
122 | static int i2c_writereg(struct i2c_adapter *i2c, u8 id, u8 reg, u8 val) | |
123 | { | |
124 | u8 msg[2] = { reg, val }; | |
125 | struct i2c_msg msgs; | |
126 | ||
127 | msgs.flags = 0; | |
128 | msgs.addr = id / 2; | |
129 | msgs.len = 2; | |
130 | msgs.buf = msg; | |
131 | return i2c_transfer(i2c, &msgs, 1); | |
132 | } | |
133 | ||
134 | static int ciintf_read_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address) | |
135 | { | |
136 | struct budget_av *budget_av = (struct budget_av *) ca->data; | |
137 | int result; | |
138 | ||
139 | if (slot != 0) | |
140 | return -EINVAL; | |
141 | ||
142 | saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTHI); | |
143 | udelay(1); | |
144 | ||
2d0235df | 145 | result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 0xfff, 1, 0, 1); |
5c1208ba AQ |
146 | if (result == -ETIMEDOUT) { |
147 | ciintf_slot_shutdown(ca, slot); | |
148 | printk(KERN_INFO "budget-av: cam ejected 1\n"); | |
149 | } | |
1da177e4 LT |
150 | return result; |
151 | } | |
152 | ||
153 | static int ciintf_write_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address, u8 value) | |
154 | { | |
155 | struct budget_av *budget_av = (struct budget_av *) ca->data; | |
156 | int result; | |
157 | ||
158 | if (slot != 0) | |
159 | return -EINVAL; | |
160 | ||
161 | saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTHI); | |
162 | udelay(1); | |
163 | ||
2d0235df | 164 | result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 0xfff, 1, value, 0, 1); |
5c1208ba AQ |
165 | if (result == -ETIMEDOUT) { |
166 | ciintf_slot_shutdown(ca, slot); | |
167 | printk(KERN_INFO "budget-av: cam ejected 2\n"); | |
168 | } | |
1da177e4 LT |
169 | return result; |
170 | } | |
171 | ||
172 | static int ciintf_read_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address) | |
173 | { | |
174 | struct budget_av *budget_av = (struct budget_av *) ca->data; | |
175 | int result; | |
176 | ||
177 | if (slot != 0) | |
178 | return -EINVAL; | |
179 | ||
180 | saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO); | |
181 | udelay(1); | |
182 | ||
183 | result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 3, 1, 0, 0); | |
5c1208ba AQ |
184 | if ((result == -ETIMEDOUT) || ((result == 0xff) && ((address & 3) < 2))) { |
185 | ciintf_slot_shutdown(ca, slot); | |
186 | printk(KERN_INFO "budget-av: cam ejected 3\n"); | |
187 | return -ETIMEDOUT; | |
188 | } | |
1da177e4 LT |
189 | return result; |
190 | } | |
191 | ||
192 | static int ciintf_write_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address, u8 value) | |
193 | { | |
194 | struct budget_av *budget_av = (struct budget_av *) ca->data; | |
195 | int result; | |
196 | ||
197 | if (slot != 0) | |
198 | return -EINVAL; | |
199 | ||
200 | saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO); | |
201 | udelay(1); | |
202 | ||
203 | result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 3, 1, value, 0, 0); | |
5c1208ba AQ |
204 | if (result == -ETIMEDOUT) { |
205 | ciintf_slot_shutdown(ca, slot); | |
206 | printk(KERN_INFO "budget-av: cam ejected 5\n"); | |
207 | } | |
1da177e4 LT |
208 | return result; |
209 | } | |
210 | ||
211 | static int ciintf_slot_reset(struct dvb_ca_en50221 *ca, int slot) | |
212 | { | |
213 | struct budget_av *budget_av = (struct budget_av *) ca->data; | |
214 | struct saa7146_dev *saa = budget_av->budget.dev; | |
1da177e4 LT |
215 | |
216 | if (slot != 0) | |
217 | return -EINVAL; | |
218 | ||
219 | dprintk(1, "ciintf_slot_reset\n"); | |
5c1208ba | 220 | budget_av->slot_status = SLOTSTATUS_RESET; |
1da177e4 | 221 | |
b82a96a7 | 222 | saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */ |
1da177e4 | 223 | |
b82a96a7 JS |
224 | saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI); /* Vcc off */ |
225 | msleep(2); | |
226 | saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO); /* Vcc on */ | |
227 | msleep(20); /* 20 ms Vcc settling time */ | |
228 | ||
229 | saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTLO); /* enable card */ | |
5c1208ba AQ |
230 | ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB); |
231 | msleep(20); | |
b82a96a7 | 232 | |
5c1208ba AQ |
233 | /* reinitialise the frontend if necessary */ |
234 | if (budget_av->reinitialise_demod) | |
235 | dvb_frontend_reinitialise(budget_av->budget.dvb_frontend); | |
86f40cc3 | 236 | |
5c1208ba AQ |
237 | /* set tda10021 back to original clock configuration on reset */ |
238 | if (budget_av->tda10021_poclkp) { | |
2bfe031d | 239 | tda10021_writereg(budget_av->budget.dvb_frontend, 0x12, 0xa0); |
5c1208ba | 240 | budget_av->tda10021_ts_enabled = 0; |
b82a96a7 JS |
241 | } |
242 | ||
1da177e4 LT |
243 | return 0; |
244 | } | |
245 | ||
246 | static int ciintf_slot_shutdown(struct dvb_ca_en50221 *ca, int slot) | |
247 | { | |
248 | struct budget_av *budget_av = (struct budget_av *) ca->data; | |
249 | struct saa7146_dev *saa = budget_av->budget.dev; | |
250 | ||
251 | if (slot != 0) | |
252 | return -EINVAL; | |
253 | ||
254 | dprintk(1, "ciintf_slot_shutdown\n"); | |
255 | ||
256 | ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB); | |
5c1208ba AQ |
257 | budget_av->slot_status = SLOTSTATUS_NONE; |
258 | ||
259 | /* set tda10021 back to original clock configuration when cam removed */ | |
260 | if (budget_av->tda10021_poclkp) { | |
2bfe031d | 261 | tda10021_writereg(budget_av->budget.dvb_frontend, 0x12, 0xa0); |
5c1208ba AQ |
262 | budget_av->tda10021_ts_enabled = 0; |
263 | } | |
1da177e4 LT |
264 | return 0; |
265 | } | |
266 | ||
267 | static int ciintf_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot) | |
268 | { | |
269 | struct budget_av *budget_av = (struct budget_av *) ca->data; | |
270 | struct saa7146_dev *saa = budget_av->budget.dev; | |
271 | ||
272 | if (slot != 0) | |
273 | return -EINVAL; | |
274 | ||
275 | dprintk(1, "ciintf_slot_ts_enable: %d\n", budget_av->slot_status); | |
276 | ||
277 | ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTA); | |
5c1208ba AQ |
278 | |
279 | /* tda10021 seems to need a different TS clock config when data is routed to the CAM */ | |
280 | if (budget_av->tda10021_poclkp) { | |
2bfe031d | 281 | tda10021_writereg(budget_av->budget.dvb_frontend, 0x12, 0xa1); |
5c1208ba AQ |
282 | budget_av->tda10021_ts_enabled = 1; |
283 | } | |
284 | ||
1da177e4 LT |
285 | return 0; |
286 | } | |
287 | ||
288 | static int ciintf_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open) | |
289 | { | |
290 | struct budget_av *budget_av = (struct budget_av *) ca->data; | |
291 | struct saa7146_dev *saa = budget_av->budget.dev; | |
5c1208ba | 292 | int result; |
1da177e4 LT |
293 | |
294 | if (slot != 0) | |
295 | return -EINVAL; | |
296 | ||
5c1208ba AQ |
297 | /* test the card detect line - needs to be done carefully |
298 | * since it never goes high for some CAMs on this interface (e.g. topuptv) */ | |
299 | if (budget_av->slot_status == SLOTSTATUS_NONE) { | |
1da177e4 LT |
300 | saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT); |
301 | udelay(1); | |
5c1208ba AQ |
302 | if (saa7146_read(saa, PSR) & MASK_06) { |
303 | if (budget_av->slot_status == SLOTSTATUS_NONE) { | |
304 | budget_av->slot_status = SLOTSTATUS_PRESENT; | |
305 | printk(KERN_INFO "budget-av: cam inserted A\n"); | |
306 | } | |
2d0235df AQ |
307 | } |
308 | saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO); | |
5c1208ba | 309 | } |
2d0235df | 310 | |
5c1208ba AQ |
311 | /* We also try and read from IO memory to work round the above detection bug. If |
312 | * there is no CAM, we will get a timeout. Only done if there is no cam | |
313 | * present, since this test actually breaks some cams :( | |
314 | * | |
315 | * if the CI interface is not open, we also do the above test since we | |
316 | * don't care if the cam has problems - we'll be resetting it on open() anyway */ | |
317 | if ((budget_av->slot_status == SLOTSTATUS_NONE) || (!open)) { | |
318 | saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO); | |
319 | result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, 0, 1, 0, 1); | |
320 | if ((result >= 0) && (budget_av->slot_status == SLOTSTATUS_NONE)) { | |
321 | budget_av->slot_status = SLOTSTATUS_PRESENT; | |
322 | printk(KERN_INFO "budget-av: cam inserted B\n"); | |
323 | } else if (result < 0) { | |
324 | if (budget_av->slot_status != SLOTSTATUS_NONE) { | |
325 | ciintf_slot_shutdown(ca, slot); | |
326 | printk(KERN_INFO "budget-av: cam ejected 5\n"); | |
327 | return 0; | |
2d0235df AQ |
328 | } |
329 | } | |
5c1208ba | 330 | } |
2d0235df | 331 | |
5c1208ba AQ |
332 | /* read from attribute memory in reset/ready state to know when the CAM is ready */ |
333 | if (budget_av->slot_status == SLOTSTATUS_RESET) { | |
334 | result = ciintf_read_attribute_mem(ca, slot, 0); | |
335 | if (result == 0x1d) { | |
336 | budget_av->slot_status = SLOTSTATUS_READY; | |
b82a96a7 | 337 | } |
1da177e4 LT |
338 | } |
339 | ||
5c1208ba AQ |
340 | /* work out correct return code */ |
341 | if (budget_av->slot_status != SLOTSTATUS_NONE) { | |
342 | if (budget_av->slot_status & SLOTSTATUS_READY) { | |
343 | return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY; | |
344 | } | |
345 | return DVB_CA_EN50221_POLL_CAM_PRESENT; | |
346 | } | |
1da177e4 LT |
347 | return 0; |
348 | } | |
349 | ||
350 | static int ciintf_init(struct budget_av *budget_av) | |
351 | { | |
352 | struct saa7146_dev *saa = budget_av->budget.dev; | |
353 | int result; | |
354 | ||
355 | memset(&budget_av->ca, 0, sizeof(struct dvb_ca_en50221)); | |
356 | ||
b82a96a7 JS |
357 | saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO); |
358 | saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTLO); | |
1da177e4 LT |
359 | saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTLO); |
360 | saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO); | |
361 | ||
1da177e4 LT |
362 | /* Enable DEBI pins */ |
363 | saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16) | 0x800); | |
364 | ||
365 | /* register CI interface */ | |
366 | budget_av->ca.owner = THIS_MODULE; | |
367 | budget_av->ca.read_attribute_mem = ciintf_read_attribute_mem; | |
368 | budget_av->ca.write_attribute_mem = ciintf_write_attribute_mem; | |
369 | budget_av->ca.read_cam_control = ciintf_read_cam_control; | |
370 | budget_av->ca.write_cam_control = ciintf_write_cam_control; | |
371 | budget_av->ca.slot_reset = ciintf_slot_reset; | |
372 | budget_av->ca.slot_shutdown = ciintf_slot_shutdown; | |
373 | budget_av->ca.slot_ts_enable = ciintf_slot_ts_enable; | |
374 | budget_av->ca.poll_slot_status = ciintf_poll_slot_status; | |
375 | budget_av->ca.data = budget_av; | |
5c1208ba AQ |
376 | budget_av->budget.ci_present = 1; |
377 | budget_av->slot_status = SLOTSTATUS_NONE; | |
b82a96a7 | 378 | |
fdc53a6d | 379 | if ((result = dvb_ca_en50221_init(&budget_av->budget.dvb_adapter, |
1da177e4 | 380 | &budget_av->ca, 0, 1)) != 0) { |
b82a96a7 | 381 | printk(KERN_ERR "budget-av: ci initialisation failed.\n"); |
1da177e4 LT |
382 | goto error; |
383 | } | |
b82a96a7 JS |
384 | |
385 | printk(KERN_INFO "budget-av: ci interface initialised.\n"); | |
1da177e4 LT |
386 | return 0; |
387 | ||
388 | error: | |
389 | saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16)); | |
390 | return result; | |
391 | } | |
392 | ||
393 | static void ciintf_deinit(struct budget_av *budget_av) | |
394 | { | |
395 | struct saa7146_dev *saa = budget_av->budget.dev; | |
396 | ||
397 | saa7146_setgpio(saa, 0, SAA7146_GPIO_INPUT); | |
398 | saa7146_setgpio(saa, 1, SAA7146_GPIO_INPUT); | |
399 | saa7146_setgpio(saa, 2, SAA7146_GPIO_INPUT); | |
400 | saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT); | |
401 | ||
402 | /* release the CA device */ | |
403 | dvb_ca_en50221_release(&budget_av->ca); | |
404 | ||
405 | /* disable DEBI pins */ | |
406 | saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16)); | |
407 | } | |
408 | ||
409 | ||
410 | static const u8 saa7113_tab[] = { | |
411 | 0x01, 0x08, | |
412 | 0x02, 0xc0, | |
413 | 0x03, 0x33, | |
414 | 0x04, 0x00, | |
415 | 0x05, 0x00, | |
416 | 0x06, 0xeb, | |
417 | 0x07, 0xe0, | |
418 | 0x08, 0x28, | |
419 | 0x09, 0x00, | |
420 | 0x0a, 0x80, | |
421 | 0x0b, 0x47, | |
422 | 0x0c, 0x40, | |
423 | 0x0d, 0x00, | |
424 | 0x0e, 0x01, | |
425 | 0x0f, 0x44, | |
426 | ||
427 | 0x10, 0x08, | |
428 | 0x11, 0x0c, | |
429 | 0x12, 0x7b, | |
430 | 0x13, 0x00, | |
431 | 0x15, 0x00, 0x16, 0x00, 0x17, 0x00, | |
432 | ||
433 | 0x57, 0xff, | |
434 | 0x40, 0x82, 0x58, 0x00, 0x59, 0x54, 0x5a, 0x07, | |
435 | 0x5b, 0x83, 0x5e, 0x00, | |
436 | 0xff | |
437 | }; | |
438 | ||
439 | static int saa7113_init(struct budget_av *budget_av) | |
440 | { | |
441 | struct budget *budget = &budget_av->budget; | |
b82a96a7 | 442 | struct saa7146_dev *saa = budget->dev; |
1da177e4 LT |
443 | const u8 *data = saa7113_tab; |
444 | ||
b82a96a7 JS |
445 | saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI); |
446 | msleep(200); | |
447 | ||
1da177e4 LT |
448 | if (i2c_writereg(&budget->i2c_adap, 0x4a, 0x01, 0x08) != 1) { |
449 | dprintk(1, "saa7113 not found on KNC card\n"); | |
450 | return -ENODEV; | |
451 | } | |
452 | ||
453 | dprintk(1, "saa7113 detected and initializing\n"); | |
454 | ||
455 | while (*data != 0xff) { | |
456 | i2c_writereg(&budget->i2c_adap, 0x4a, *data, *(data + 1)); | |
457 | data += 2; | |
458 | } | |
459 | ||
460 | dprintk(1, "saa7113 status=%02x\n", i2c_readreg(&budget->i2c_adap, 0x4a, 0x1f)); | |
461 | ||
462 | return 0; | |
463 | } | |
464 | ||
465 | static int saa7113_setinput(struct budget_av *budget_av, int input) | |
466 | { | |
467 | struct budget *budget = &budget_av->budget; | |
468 | ||
469 | if (1 != budget_av->has_saa7113) | |
470 | return -ENODEV; | |
471 | ||
472 | if (input == 1) { | |
473 | i2c_writereg(&budget->i2c_adap, 0x4a, 0x02, 0xc7); | |
474 | i2c_writereg(&budget->i2c_adap, 0x4a, 0x09, 0x80); | |
475 | } else if (input == 0) { | |
476 | i2c_writereg(&budget->i2c_adap, 0x4a, 0x02, 0xc0); | |
477 | i2c_writereg(&budget->i2c_adap, 0x4a, 0x09, 0x00); | |
478 | } else | |
479 | return -EINVAL; | |
480 | ||
481 | budget_av->cur_input = input; | |
482 | return 0; | |
483 | } | |
484 | ||
485 | ||
486 | static int philips_su1278_ty_ci_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio) | |
487 | { | |
488 | u8 aclk = 0; | |
489 | u8 bclk = 0; | |
490 | u8 m1; | |
491 | ||
492 | aclk = 0xb5; | |
493 | if (srate < 2000000) | |
494 | bclk = 0x86; | |
495 | else if (srate < 5000000) | |
496 | bclk = 0x89; | |
497 | else if (srate < 15000000) | |
498 | bclk = 0x8f; | |
499 | else if (srate < 45000000) | |
500 | bclk = 0x95; | |
501 | ||
502 | m1 = 0x14; | |
503 | if (srate < 4000000) | |
504 | m1 = 0x10; | |
505 | ||
506 | stv0299_writereg(fe, 0x13, aclk); | |
507 | stv0299_writereg(fe, 0x14, bclk); | |
508 | stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff); | |
509 | stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff); | |
510 | stv0299_writereg(fe, 0x21, (ratio) & 0xf0); | |
511 | stv0299_writereg(fe, 0x0f, 0x80 | m1); | |
512 | ||
513 | return 0; | |
514 | } | |
515 | ||
e87d41c4 AQ |
516 | static int philips_su1278_ty_ci_tuner_set_params(struct dvb_frontend *fe, |
517 | struct dvb_frontend_parameters *params) | |
1da177e4 | 518 | { |
1da177e4 LT |
519 | u32 div; |
520 | u8 buf[4]; | |
e87d41c4 | 521 | struct budget *budget = (struct budget *) fe->dvb->priv; |
1da177e4 LT |
522 | struct i2c_msg msg = {.addr = 0x61,.flags = 0,.buf = buf,.len = sizeof(buf) }; |
523 | ||
524 | if ((params->frequency < 950000) || (params->frequency > 2150000)) | |
525 | return -EINVAL; | |
526 | ||
527 | div = (params->frequency + (125 - 1)) / 125; // round correctly | |
528 | buf[0] = (div >> 8) & 0x7f; | |
529 | buf[1] = div & 0xff; | |
530 | buf[2] = 0x80 | ((div & 0x18000) >> 10) | 4; | |
531 | buf[3] = 0x20; | |
532 | ||
533 | if (params->u.qpsk.symbol_rate < 4000000) | |
534 | buf[3] |= 1; | |
535 | ||
536 | if (params->frequency < 1250000) | |
537 | buf[3] |= 0; | |
538 | else if (params->frequency < 1550000) | |
539 | buf[3] |= 0x40; | |
540 | else if (params->frequency < 2050000) | |
541 | buf[3] |= 0x80; | |
542 | else if (params->frequency < 2150000) | |
543 | buf[3] |= 0xC0; | |
544 | ||
dea74869 PB |
545 | if (fe->ops.i2c_gate_ctrl) |
546 | fe->ops.i2c_gate_ctrl(fe, 1); | |
e87d41c4 | 547 | if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1) |
1da177e4 LT |
548 | return -EIO; |
549 | return 0; | |
550 | } | |
551 | ||
552 | static u8 typhoon_cinergy1200s_inittab[] = { | |
553 | 0x01, 0x15, | |
554 | 0x02, 0x30, | |
555 | 0x03, 0x00, | |
556 | 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */ | |
557 | 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */ | |
558 | 0x06, 0x40, /* DAC not used, set to high impendance mode */ | |
559 | 0x07, 0x00, /* DAC LSB */ | |
560 | 0x08, 0x40, /* DiSEqC off */ | |
561 | 0x09, 0x00, /* FIFO */ | |
562 | 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */ | |
563 | 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */ | |
564 | 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */ | |
565 | 0x10, 0x3f, // AGC2 0x3d | |
566 | 0x11, 0x84, | |
ff29d06a | 567 | 0x12, 0xb9, |
1da177e4 LT |
568 | 0x15, 0xc9, // lock detector threshold |
569 | 0x16, 0x00, | |
570 | 0x17, 0x00, | |
571 | 0x18, 0x00, | |
572 | 0x19, 0x00, | |
573 | 0x1a, 0x00, | |
574 | 0x1f, 0x50, | |
575 | 0x20, 0x00, | |
576 | 0x21, 0x00, | |
577 | 0x22, 0x00, | |
578 | 0x23, 0x00, | |
579 | 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0 | |
580 | 0x29, 0x1e, // 1/2 threshold | |
581 | 0x2a, 0x14, // 2/3 threshold | |
582 | 0x2b, 0x0f, // 3/4 threshold | |
583 | 0x2c, 0x09, // 5/6 threshold | |
584 | 0x2d, 0x05, // 7/8 threshold | |
585 | 0x2e, 0x01, | |
586 | 0x31, 0x1f, // test all FECs | |
587 | 0x32, 0x19, // viterbi and synchro search | |
588 | 0x33, 0xfc, // rs control | |
589 | 0x34, 0x93, // error control | |
590 | 0x0f, 0x92, | |
591 | 0xff, 0xff | |
592 | }; | |
593 | ||
594 | static struct stv0299_config typhoon_config = { | |
595 | .demod_address = 0x68, | |
596 | .inittab = typhoon_cinergy1200s_inittab, | |
597 | .mclk = 88000000UL, | |
598 | .invert = 0, | |
1da177e4 LT |
599 | .skip_reinit = 0, |
600 | .lock_output = STV0229_LOCKOUTPUT_1, | |
601 | .volt13_op0_op1 = STV0299_VOLT13_OP0, | |
602 | .min_delay_ms = 100, | |
603 | .set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate, | |
1da177e4 LT |
604 | }; |
605 | ||
606 | ||
607 | static struct stv0299_config cinergy_1200s_config = { | |
608 | .demod_address = 0x68, | |
609 | .inittab = typhoon_cinergy1200s_inittab, | |
610 | .mclk = 88000000UL, | |
611 | .invert = 0, | |
1da177e4 LT |
612 | .skip_reinit = 0, |
613 | .lock_output = STV0229_LOCKOUTPUT_0, | |
614 | .volt13_op0_op1 = STV0299_VOLT13_OP0, | |
615 | .min_delay_ms = 100, | |
616 | .set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate, | |
1da177e4 LT |
617 | }; |
618 | ||
effa791c AQ |
619 | static struct stv0299_config cinergy_1200s_1894_0010_config = { |
620 | .demod_address = 0x68, | |
621 | .inittab = typhoon_cinergy1200s_inittab, | |
622 | .mclk = 88000000UL, | |
623 | .invert = 1, | |
624 | .skip_reinit = 0, | |
625 | .lock_output = STV0229_LOCKOUTPUT_1, | |
626 | .volt13_op0_op1 = STV0299_VOLT13_OP0, | |
627 | .min_delay_ms = 100, | |
628 | .set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate, | |
effa791c | 629 | }; |
1da177e4 | 630 | |
e87d41c4 | 631 | static int philips_cu1216_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) |
1da177e4 LT |
632 | { |
633 | struct budget *budget = (struct budget *) fe->dvb->priv; | |
634 | u8 buf[4]; | |
635 | struct i2c_msg msg = {.addr = 0x60,.flags = 0,.buf = buf,.len = sizeof(buf) }; | |
636 | ||
637 | #define TUNER_MUL 62500 | |
638 | ||
639 | u32 div = (params->frequency + 36125000 + TUNER_MUL / 2) / TUNER_MUL; | |
640 | ||
641 | buf[0] = (div >> 8) & 0x7f; | |
642 | buf[1] = div & 0xff; | |
eef5764d JS |
643 | buf[2] = 0x86; |
644 | buf[3] = (params->frequency < 150000000 ? 0x01 : | |
645 | params->frequency < 445000000 ? 0x02 : 0x04); | |
1da177e4 | 646 | |
dea74869 PB |
647 | if (fe->ops.i2c_gate_ctrl) |
648 | fe->ops.i2c_gate_ctrl(fe, 1); | |
1da177e4 LT |
649 | if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1) |
650 | return -EIO; | |
651 | return 0; | |
652 | } | |
653 | ||
654 | static struct tda10021_config philips_cu1216_config = { | |
655 | .demod_address = 0x0c, | |
1da177e4 LT |
656 | }; |
657 | ||
61cebe9d AQ |
658 | static struct tda10021_config philips_cu1216_config_altaddress = { |
659 | .demod_address = 0x0d, | |
660 | }; | |
661 | ||
1da177e4 LT |
662 | |
663 | ||
664 | ||
e87d41c4 | 665 | static int philips_tu1216_tuner_init(struct dvb_frontend *fe) |
1da177e4 LT |
666 | { |
667 | struct budget *budget = (struct budget *) fe->dvb->priv; | |
668 | static u8 tu1216_init[] = { 0x0b, 0xf5, 0x85, 0xab }; | |
669 | struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tu1216_init,.len = sizeof(tu1216_init) }; | |
670 | ||
671 | // setup PLL configuration | |
dea74869 PB |
672 | if (fe->ops.i2c_gate_ctrl) |
673 | fe->ops.i2c_gate_ctrl(fe, 1); | |
1da177e4 LT |
674 | if (i2c_transfer(&budget->i2c_adap, &tuner_msg, 1) != 1) |
675 | return -EIO; | |
676 | msleep(1); | |
677 | ||
678 | return 0; | |
679 | } | |
680 | ||
e87d41c4 | 681 | static int philips_tu1216_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) |
1da177e4 LT |
682 | { |
683 | struct budget *budget = (struct budget *) fe->dvb->priv; | |
684 | u8 tuner_buf[4]; | |
685 | struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tuner_buf,.len = | |
686 | sizeof(tuner_buf) }; | |
687 | int tuner_frequency = 0; | |
688 | u8 band, cp, filter; | |
689 | ||
690 | // determine charge pump | |
691 | tuner_frequency = params->frequency + 36166000; | |
692 | if (tuner_frequency < 87000000) | |
693 | return -EINVAL; | |
694 | else if (tuner_frequency < 130000000) | |
695 | cp = 3; | |
696 | else if (tuner_frequency < 160000000) | |
697 | cp = 5; | |
698 | else if (tuner_frequency < 200000000) | |
699 | cp = 6; | |
700 | else if (tuner_frequency < 290000000) | |
701 | cp = 3; | |
702 | else if (tuner_frequency < 420000000) | |
703 | cp = 5; | |
704 | else if (tuner_frequency < 480000000) | |
705 | cp = 6; | |
706 | else if (tuner_frequency < 620000000) | |
707 | cp = 3; | |
708 | else if (tuner_frequency < 830000000) | |
709 | cp = 5; | |
710 | else if (tuner_frequency < 895000000) | |
711 | cp = 7; | |
712 | else | |
713 | return -EINVAL; | |
714 | ||
715 | // determine band | |
716 | if (params->frequency < 49000000) | |
717 | return -EINVAL; | |
718 | else if (params->frequency < 161000000) | |
719 | band = 1; | |
720 | else if (params->frequency < 444000000) | |
721 | band = 2; | |
722 | else if (params->frequency < 861000000) | |
723 | band = 4; | |
724 | else | |
725 | return -EINVAL; | |
726 | ||
727 | // setup PLL filter | |
728 | switch (params->u.ofdm.bandwidth) { | |
729 | case BANDWIDTH_6_MHZ: | |
730 | filter = 0; | |
731 | break; | |
732 | ||
733 | case BANDWIDTH_7_MHZ: | |
734 | filter = 0; | |
735 | break; | |
736 | ||
737 | case BANDWIDTH_8_MHZ: | |
738 | filter = 1; | |
739 | break; | |
740 | ||
741 | default: | |
742 | return -EINVAL; | |
743 | } | |
744 | ||
745 | // calculate divisor | |
746 | // ((36166000+((1000000/6)/2)) + Finput)/(1000000/6) | |
747 | tuner_frequency = (((params->frequency / 1000) * 6) + 217496) / 1000; | |
748 | ||
749 | // setup tuner buffer | |
750 | tuner_buf[0] = (tuner_frequency >> 8) & 0x7f; | |
751 | tuner_buf[1] = tuner_frequency & 0xff; | |
752 | tuner_buf[2] = 0xca; | |
753 | tuner_buf[3] = (cp << 5) | (filter << 3) | band; | |
754 | ||
dea74869 PB |
755 | if (fe->ops.i2c_gate_ctrl) |
756 | fe->ops.i2c_gate_ctrl(fe, 1); | |
1da177e4 LT |
757 | if (i2c_transfer(&budget->i2c_adap, &tuner_msg, 1) != 1) |
758 | return -EIO; | |
759 | ||
760 | msleep(1); | |
761 | return 0; | |
762 | } | |
763 | ||
764 | static int philips_tu1216_request_firmware(struct dvb_frontend *fe, | |
765 | const struct firmware **fw, char *name) | |
766 | { | |
767 | struct budget *budget = (struct budget *) fe->dvb->priv; | |
768 | ||
769 | return request_firmware(fw, name, &budget->dev->pci->dev); | |
770 | } | |
771 | ||
772 | static struct tda1004x_config philips_tu1216_config = { | |
773 | ||
774 | .demod_address = 0x8, | |
775 | .invert = 1, | |
776 | .invert_oclk = 1, | |
ecb60deb HH |
777 | .xtal_freq = TDA10046_XTAL_4M, |
778 | .agc_config = TDA10046_AGC_DEFAULT, | |
779 | .if_freq = TDA10046_FREQ_3617, | |
1da177e4 LT |
780 | .request_firmware = philips_tu1216_request_firmware, |
781 | }; | |
782 | ||
f8bf134d RP |
783 | static u8 philips_sd1878_inittab[] = { |
784 | 0x01, 0x15, | |
785 | 0x02, 0x30, | |
786 | 0x03, 0x00, | |
787 | 0x04, 0x7d, | |
788 | 0x05, 0x35, | |
789 | 0x06, 0x40, | |
790 | 0x07, 0x00, | |
791 | 0x08, 0x43, | |
792 | 0x09, 0x02, | |
793 | 0x0C, 0x51, | |
794 | 0x0D, 0x82, | |
795 | 0x0E, 0x23, | |
796 | 0x10, 0x3f, | |
797 | 0x11, 0x84, | |
798 | 0x12, 0xb9, | |
799 | 0x15, 0xc9, | |
800 | 0x16, 0x19, | |
801 | 0x17, 0x8c, | |
802 | 0x18, 0x59, | |
803 | 0x19, 0xf8, | |
804 | 0x1a, 0xfe, | |
805 | 0x1c, 0x7f, | |
806 | 0x1d, 0x00, | |
807 | 0x1e, 0x00, | |
808 | 0x1f, 0x50, | |
809 | 0x20, 0x00, | |
810 | 0x21, 0x00, | |
811 | 0x22, 0x00, | |
812 | 0x23, 0x00, | |
813 | 0x28, 0x00, | |
814 | 0x29, 0x28, | |
815 | 0x2a, 0x14, | |
816 | 0x2b, 0x0f, | |
817 | 0x2c, 0x09, | |
818 | 0x2d, 0x09, | |
819 | 0x31, 0x1f, | |
820 | 0x32, 0x19, | |
821 | 0x33, 0xfc, | |
822 | 0x34, 0x93, | |
823 | 0xff, 0xff | |
824 | }; | |
825 | ||
e87d41c4 AQ |
826 | static int philips_sd1878_tda8261_tuner_set_params(struct dvb_frontend *fe, |
827 | struct dvb_frontend_parameters *params) | |
f8bf134d RP |
828 | { |
829 | u8 buf[4]; | |
830 | int rc; | |
831 | struct i2c_msg tuner_msg = {.addr=0x60,.flags=0,.buf=buf,.len=sizeof(buf)}; | |
e87d41c4 | 832 | struct budget *budget = (struct budget *) fe->dvb->priv; |
f8bf134d RP |
833 | |
834 | if((params->frequency < 950000) || (params->frequency > 2150000)) | |
835 | return -EINVAL; | |
836 | ||
837 | rc=dvb_pll_configure(&dvb_pll_philips_sd1878_tda8261, buf, | |
47ae9ae8 | 838 | params->frequency, 0); |
f8bf134d | 839 | if(rc < 0) return rc; |
1da177e4 | 840 | |
dea74869 PB |
841 | if (fe->ops.i2c_gate_ctrl) |
842 | fe->ops.i2c_gate_ctrl(fe, 1); | |
e87d41c4 | 843 | if(i2c_transfer(&budget->i2c_adap, &tuner_msg, 1) != 1) |
f8bf134d | 844 | return -EIO; |
1da177e4 | 845 | |
f8bf134d RP |
846 | return 0; |
847 | } | |
848 | ||
849 | static int philips_sd1878_ci_set_symbol_rate(struct dvb_frontend *fe, | |
850 | u32 srate, u32 ratio) | |
851 | { | |
852 | u8 aclk = 0; | |
853 | u8 bclk = 0; | |
854 | u8 m1; | |
855 | ||
856 | aclk = 0xb5; | |
857 | if (srate < 2000000) | |
858 | bclk = 0x86; | |
859 | else if (srate < 5000000) | |
860 | bclk = 0x89; | |
861 | else if (srate < 15000000) | |
862 | bclk = 0x8f; | |
863 | else if (srate < 45000000) | |
864 | bclk = 0x95; | |
865 | ||
866 | m1 = 0x14; | |
867 | if (srate < 4000000) | |
868 | m1 = 0x10; | |
869 | ||
870 | stv0299_writereg(fe, 0x0e, 0x23); | |
871 | stv0299_writereg(fe, 0x0f, 0x94); | |
872 | stv0299_writereg(fe, 0x10, 0x39); | |
873 | stv0299_writereg(fe, 0x13, aclk); | |
874 | stv0299_writereg(fe, 0x14, bclk); | |
875 | stv0299_writereg(fe, 0x15, 0xc9); | |
876 | stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff); | |
877 | stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff); | |
878 | stv0299_writereg(fe, 0x21, (ratio) & 0xf0); | |
879 | stv0299_writereg(fe, 0x0f, 0x80 | m1); | |
880 | ||
881 | return 0; | |
882 | } | |
883 | ||
884 | static struct stv0299_config philips_sd1878_config = { | |
885 | .demod_address = 0x68, | |
5c1208ba | 886 | .inittab = philips_sd1878_inittab, |
f8bf134d RP |
887 | .mclk = 88000000UL, |
888 | .invert = 0, | |
889 | .skip_reinit = 0, | |
890 | .lock_output = STV0229_LOCKOUTPUT_1, | |
891 | .volt13_op0_op1 = STV0299_VOLT13_OP0, | |
892 | .min_delay_ms = 100, | |
893 | .set_symbol_rate = philips_sd1878_ci_set_symbol_rate, | |
f8bf134d | 894 | }; |
1da177e4 LT |
895 | |
896 | static u8 read_pwm(struct budget_av *budget_av) | |
897 | { | |
898 | u8 b = 0xff; | |
899 | u8 pwm; | |
900 | struct i2c_msg msg[] = { {.addr = 0x50,.flags = 0,.buf = &b,.len = 1}, | |
901 | {.addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1} | |
902 | }; | |
903 | ||
904 | if ((i2c_transfer(&budget_av->budget.i2c_adap, msg, 2) != 2) | |
905 | || (pwm == 0xff)) | |
906 | pwm = 0x48; | |
907 | ||
908 | return pwm; | |
909 | } | |
910 | ||
b82a96a7 JS |
911 | #define SUBID_DVBS_KNC1 0x0010 |
912 | #define SUBID_DVBS_KNC1_PLUS 0x0011 | |
913 | #define SUBID_DVBS_TYPHOON 0x4f56 | |
914 | #define SUBID_DVBS_CINERGY1200 0x1154 | |
f8bf134d | 915 | #define SUBID_DVBS_CYNERGY1200N 0x1155 |
b82a96a7 | 916 | |
f8bf134d RP |
917 | #define SUBID_DVBS_TV_STAR 0x0014 |
918 | #define SUBID_DVBS_TV_STAR_CI 0x0016 | |
60110ce2 | 919 | #define SUBID_DVBS_EASYWATCH_1 0x001a |
36f4f334 | 920 | #define SUBID_DVBS_EASYWATCH 0x001e |
c01d1e48 | 921 | #define SUBID_DVBC_EASYWATCH 0x002a |
b82a96a7 JS |
922 | #define SUBID_DVBC_KNC1 0x0020 |
923 | #define SUBID_DVBC_KNC1_PLUS 0x0021 | |
924 | #define SUBID_DVBC_CINERGY1200 0x1156 | |
925 | ||
926 | #define SUBID_DVBT_KNC1_PLUS 0x0031 | |
927 | #define SUBID_DVBT_KNC1 0x0030 | |
928 | #define SUBID_DVBT_CINERGY1200 0x1157 | |
1da177e4 | 929 | |
5c1208ba AQ |
930 | |
931 | static int tda10021_set_frontend(struct dvb_frontend *fe, | |
932 | struct dvb_frontend_parameters *p) | |
933 | { | |
934 | struct budget_av* budget_av = fe->dvb->priv; | |
935 | int result; | |
936 | ||
937 | result = budget_av->tda10021_set_frontend(fe, p); | |
938 | if (budget_av->tda10021_ts_enabled) { | |
2bfe031d | 939 | tda10021_writereg(budget_av->budget.dvb_frontend, 0x12, 0xa1); |
5c1208ba | 940 | } else { |
2bfe031d | 941 | tda10021_writereg(budget_av->budget.dvb_frontend, 0x12, 0xa0); |
5c1208ba AQ |
942 | } |
943 | ||
944 | return result; | |
945 | } | |
946 | ||
1da177e4 LT |
947 | static void frontend_init(struct budget_av *budget_av) |
948 | { | |
b82a96a7 JS |
949 | struct saa7146_dev * saa = budget_av->budget.dev; |
950 | struct dvb_frontend * fe = NULL; | |
951 | ||
473f5427 AQ |
952 | /* Enable / PowerON Frontend */ |
953 | saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO); | |
954 | ||
955 | /* additional setup necessary for the PLUS cards */ | |
b82a96a7 JS |
956 | switch (saa->pci->subsystem_device) { |
957 | case SUBID_DVBS_KNC1_PLUS: | |
958 | case SUBID_DVBC_KNC1_PLUS: | |
959 | case SUBID_DVBT_KNC1_PLUS: | |
c01d1e48 | 960 | case SUBID_DVBC_EASYWATCH: |
b82a96a7 | 961 | saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTHI); |
1da177e4 | 962 | break; |
b82a96a7 JS |
963 | } |
964 | ||
965 | switch (saa->pci->subsystem_device) { | |
966 | ||
967 | case SUBID_DVBS_KNC1: | |
4e318bef | 968 | case SUBID_DVBS_KNC1_PLUS: |
60110ce2 | 969 | case SUBID_DVBS_EASYWATCH_1: |
effa791c | 970 | if (saa->pci->subsystem_vendor == 0x1894) { |
2bfe031d | 971 | fe = dvb_attach(stv0299_attach, &cinergy_1200s_1894_0010_config, |
effa791c | 972 | &budget_av->budget.i2c_adap); |
e87d41c4 | 973 | if (fe) { |
1c72cfdc | 974 | dvb_attach(tua6100_attach, fe, 0x60, &budget_av->budget.i2c_adap); |
e87d41c4 | 975 | } |
effa791c | 976 | } else { |
2bfe031d | 977 | fe = dvb_attach(stv0299_attach, &typhoon_config, |
effa791c | 978 | &budget_av->budget.i2c_adap); |
e87d41c4 | 979 | if (fe) { |
dea74869 | 980 | fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params; |
e87d41c4 | 981 | } |
effa791c AQ |
982 | } |
983 | break; | |
984 | ||
f8bf134d RP |
985 | case SUBID_DVBS_TV_STAR: |
986 | case SUBID_DVBS_TV_STAR_CI: | |
987 | case SUBID_DVBS_CYNERGY1200N: | |
36f4f334 | 988 | case SUBID_DVBS_EASYWATCH: |
2bfe031d | 989 | fe = dvb_attach(stv0299_attach, &philips_sd1878_config, |
f8bf134d | 990 | &budget_av->budget.i2c_adap); |
e87d41c4 | 991 | if (fe) { |
dea74869 | 992 | fe->ops.tuner_ops.set_params = philips_sd1878_tda8261_tuner_set_params; |
e87d41c4 | 993 | } |
f8bf134d RP |
994 | break; |
995 | ||
b82a96a7 | 996 | case SUBID_DVBS_TYPHOON: |
2bfe031d | 997 | fe = dvb_attach(stv0299_attach, &typhoon_config, |
b82a96a7 | 998 | &budget_av->budget.i2c_adap); |
e87d41c4 | 999 | if (fe) { |
dea74869 | 1000 | fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params; |
e87d41c4 | 1001 | } |
1da177e4 LT |
1002 | break; |
1003 | ||
b82a96a7 | 1004 | case SUBID_DVBS_CINERGY1200: |
2bfe031d | 1005 | fe = dvb_attach(stv0299_attach, &cinergy_1200s_config, |
b82a96a7 | 1006 | &budget_av->budget.i2c_adap); |
e87d41c4 | 1007 | if (fe) { |
dea74869 | 1008 | fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params; |
e87d41c4 | 1009 | } |
1da177e4 LT |
1010 | break; |
1011 | ||
b82a96a7 JS |
1012 | case SUBID_DVBC_KNC1: |
1013 | case SUBID_DVBC_KNC1_PLUS: | |
5c1208ba | 1014 | case SUBID_DVBC_CINERGY1200: |
c01d1e48 | 1015 | case SUBID_DVBC_EASYWATCH: |
5c1208ba | 1016 | budget_av->reinitialise_demod = 1; |
2bfe031d | 1017 | fe = dvb_attach(tda10021_attach, &philips_cu1216_config, |
b82a96a7 JS |
1018 | &budget_av->budget.i2c_adap, |
1019 | read_pwm(budget_av)); | |
61cebe9d AQ |
1020 | if (fe == NULL) |
1021 | fe = dvb_attach(tda10021_attach, &philips_cu1216_config_altaddress, | |
1022 | &budget_av->budget.i2c_adap, | |
1023 | read_pwm(budget_av)); | |
e87d41c4 | 1024 | if (fe) { |
5c1208ba | 1025 | budget_av->tda10021_poclkp = 1; |
dea74869 PB |
1026 | budget_av->tda10021_set_frontend = fe->ops.set_frontend; |
1027 | fe->ops.set_frontend = tda10021_set_frontend; | |
1028 | fe->ops.tuner_ops.set_params = philips_cu1216_tuner_set_params; | |
e87d41c4 | 1029 | } |
1da177e4 LT |
1030 | break; |
1031 | ||
b82a96a7 JS |
1032 | case SUBID_DVBT_KNC1: |
1033 | case SUBID_DVBT_KNC1_PLUS: | |
b82a96a7 | 1034 | case SUBID_DVBT_CINERGY1200: |
5c1208ba | 1035 | budget_av->reinitialise_demod = 1; |
2bfe031d | 1036 | fe = dvb_attach(tda10046_attach, &philips_tu1216_config, |
b82a96a7 | 1037 | &budget_av->budget.i2c_adap); |
6b3ccab7 | 1038 | if (fe) { |
dea74869 PB |
1039 | fe->ops.tuner_ops.init = philips_tu1216_tuner_init; |
1040 | fe->ops.tuner_ops.set_params = philips_tu1216_tuner_set_params; | |
6b3ccab7 | 1041 | } |
1da177e4 LT |
1042 | break; |
1043 | } | |
1044 | ||
b82a96a7 JS |
1045 | if (fe == NULL) { |
1046 | printk(KERN_ERR "budget-av: A frontend driver was not found " | |
1047 | "for device %04x/%04x subsystem %04x/%04x\n", | |
1048 | saa->pci->vendor, | |
1049 | saa->pci->device, | |
1050 | saa->pci->subsystem_vendor, | |
1051 | saa->pci->subsystem_device); | |
1052 | return; | |
1053 | } | |
1054 | ||
1055 | budget_av->budget.dvb_frontend = fe; | |
1056 | ||
1057 | if (dvb_register_frontend(&budget_av->budget.dvb_adapter, | |
1058 | budget_av->budget.dvb_frontend)) { | |
1059 | printk(KERN_ERR "budget-av: Frontend registration failed!\n"); | |
f52a838b | 1060 | dvb_frontend_detach(budget_av->budget.dvb_frontend); |
b82a96a7 | 1061 | budget_av->budget.dvb_frontend = NULL; |
1da177e4 LT |
1062 | } |
1063 | } | |
1064 | ||
1065 | ||
1066 | static void budget_av_irq(struct saa7146_dev *dev, u32 * isr) | |
1067 | { | |
1068 | struct budget_av *budget_av = (struct budget_av *) dev->ext_priv; | |
1069 | ||
1070 | dprintk(8, "dev: %p, budget_av: %p\n", dev, budget_av); | |
1071 | ||
1072 | if (*isr & MASK_10) | |
1073 | ttpci_budget_irq10_handler(dev, isr); | |
1074 | } | |
1075 | ||
1076 | static int budget_av_detach(struct saa7146_dev *dev) | |
1077 | { | |
1078 | struct budget_av *budget_av = (struct budget_av *) dev->ext_priv; | |
1079 | int err; | |
1080 | ||
1081 | dprintk(2, "dev: %p\n", dev); | |
1082 | ||
1083 | if (1 == budget_av->has_saa7113) { | |
1084 | saa7146_setgpio(dev, 0, SAA7146_GPIO_OUTLO); | |
1085 | ||
1086 | msleep(200); | |
1087 | ||
1088 | saa7146_unregister_device(&budget_av->vd, dev); | |
1089 | } | |
1090 | ||
1091 | if (budget_av->budget.ci_present) | |
1092 | ciintf_deinit(budget_av); | |
1093 | ||
2bfe031d | 1094 | if (budget_av->budget.dvb_frontend != NULL) { |
1da177e4 | 1095 | dvb_unregister_frontend(budget_av->budget.dvb_frontend); |
f52a838b | 1096 | dvb_frontend_detach(budget_av->budget.dvb_frontend); |
2bfe031d | 1097 | } |
1da177e4 LT |
1098 | err = ttpci_budget_deinit(&budget_av->budget); |
1099 | ||
1100 | kfree(budget_av); | |
1101 | ||
1102 | return err; | |
1103 | } | |
1104 | ||
1105 | static struct saa7146_ext_vv vv_data; | |
1106 | ||
1107 | static int budget_av_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info) | |
1108 | { | |
1109 | struct budget_av *budget_av; | |
1110 | u8 *mac; | |
1111 | int err; | |
1112 | ||
1113 | dprintk(2, "dev: %p\n", dev); | |
1114 | ||
7408187d | 1115 | if (!(budget_av = kzalloc(sizeof(struct budget_av), GFP_KERNEL))) |
1da177e4 LT |
1116 | return -ENOMEM; |
1117 | ||
b82a96a7 | 1118 | budget_av->has_saa7113 = 0; |
1da177e4 LT |
1119 | budget_av->budget.ci_present = 0; |
1120 | ||
1121 | dev->ext_priv = budget_av; | |
1122 | ||
1123 | if ((err = ttpci_budget_init(&budget_av->budget, dev, info, THIS_MODULE))) { | |
1124 | kfree(budget_av); | |
1125 | return err; | |
1126 | } | |
1127 | ||
1128 | /* knc1 initialization */ | |
1129 | saa7146_write(dev, DD1_STREAM_B, 0x04000000); | |
1130 | saa7146_write(dev, DD1_INIT, 0x07000600); | |
1131 | saa7146_write(dev, MC2, MASK_09 | MASK_25 | MASK_10 | MASK_26); | |
1132 | ||
b82a96a7 | 1133 | if (saa7113_init(budget_av) == 0) { |
1da177e4 LT |
1134 | budget_av->has_saa7113 = 1; |
1135 | ||
1136 | if (0 != saa7146_vv_init(dev, &vv_data)) { | |
1137 | /* fixme: proper cleanup here */ | |
1138 | ERR(("cannot init vv subsystem.\n")); | |
1139 | return err; | |
1140 | } | |
1141 | ||
1142 | if ((err = saa7146_register_device(&budget_av->vd, dev, "knc1", VFL_TYPE_GRABBER))) { | |
1143 | /* fixme: proper cleanup here */ | |
1144 | ERR(("cannot register capture v4l2 device.\n")); | |
1145 | return err; | |
1146 | } | |
1147 | ||
1148 | /* beware: this modifies dev->vv ... */ | |
1149 | saa7146_set_hps_source_and_sync(dev, SAA7146_HPS_SOURCE_PORT_A, | |
1150 | SAA7146_HPS_SYNC_PORT_A); | |
1151 | ||
1152 | saa7113_setinput(budget_av, 0); | |
1da177e4 LT |
1153 | } |
1154 | ||
1155 | /* fixme: find some sane values here... */ | |
1156 | saa7146_write(dev, PCI_BT_V1, 0x1c00101f); | |
1157 | ||
fdc53a6d | 1158 | mac = budget_av->budget.dvb_adapter.proposed_mac; |
1da177e4 | 1159 | if (i2c_readregs(&budget_av->budget.i2c_adap, 0xa0, 0x30, mac, 6)) { |
b82a96a7 | 1160 | printk(KERN_ERR "KNC1-%d: Could not read MAC from KNC1 card\n", |
fdc53a6d | 1161 | budget_av->budget.dvb_adapter.num); |
1da177e4 LT |
1162 | memset(mac, 0, 6); |
1163 | } else { | |
b82a96a7 | 1164 | printk(KERN_INFO "KNC1-%d: MAC addr = %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n", |
fdc53a6d | 1165 | budget_av->budget.dvb_adapter.num, |
1da177e4 LT |
1166 | mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]); |
1167 | } | |
1168 | ||
fdc53a6d | 1169 | budget_av->budget.dvb_adapter.priv = budget_av; |
1da177e4 | 1170 | frontend_init(budget_av); |
c5e768a1 | 1171 | ciintf_init(budget_av); |
32e4c3a5 OE |
1172 | |
1173 | ttpci_budget_init_hooks(&budget_av->budget); | |
1174 | ||
1da177e4 LT |
1175 | return 0; |
1176 | } | |
1177 | ||
1178 | #define KNC1_INPUTS 2 | |
1179 | static struct v4l2_input knc1_inputs[KNC1_INPUTS] = { | |
1180 | {0, "Composite", V4L2_INPUT_TYPE_TUNER, 1, 0, V4L2_STD_PAL_BG | V4L2_STD_NTSC_M, 0}, | |
1181 | {1, "S-Video", V4L2_INPUT_TYPE_CAMERA, 2, 0, V4L2_STD_PAL_BG | V4L2_STD_NTSC_M, 0}, | |
1182 | }; | |
1183 | ||
1184 | static struct saa7146_extension_ioctls ioctls[] = { | |
1185 | {VIDIOC_ENUMINPUT, SAA7146_EXCLUSIVE}, | |
1186 | {VIDIOC_G_INPUT, SAA7146_EXCLUSIVE}, | |
1187 | {VIDIOC_S_INPUT, SAA7146_EXCLUSIVE}, | |
1188 | {0, 0} | |
1189 | }; | |
1190 | ||
1191 | static int av_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) | |
1192 | { | |
1193 | struct saa7146_dev *dev = fh->dev; | |
1194 | struct budget_av *budget_av = (struct budget_av *) dev->ext_priv; | |
1195 | ||
1196 | switch (cmd) { | |
1197 | case VIDIOC_ENUMINPUT:{ | |
1198 | struct v4l2_input *i = arg; | |
1199 | ||
1200 | dprintk(1, "VIDIOC_ENUMINPUT %d.\n", i->index); | |
1201 | if (i->index < 0 || i->index >= KNC1_INPUTS) { | |
1202 | return -EINVAL; | |
1203 | } | |
1204 | memcpy(i, &knc1_inputs[i->index], sizeof(struct v4l2_input)); | |
1205 | return 0; | |
1206 | } | |
1207 | case VIDIOC_G_INPUT:{ | |
1208 | int *input = (int *) arg; | |
1209 | ||
1210 | *input = budget_av->cur_input; | |
1211 | ||
1212 | dprintk(1, "VIDIOC_G_INPUT %d.\n", *input); | |
1213 | return 0; | |
1214 | } | |
1215 | case VIDIOC_S_INPUT:{ | |
1216 | int input = *(int *) arg; | |
1217 | dprintk(1, "VIDIOC_S_INPUT %d.\n", input); | |
1218 | return saa7113_setinput(budget_av, input); | |
1219 | } | |
1220 | default: | |
1221 | return -ENOIOCTLCMD; | |
1222 | } | |
1223 | return 0; | |
1224 | } | |
1225 | ||
1226 | static struct saa7146_standard standard[] = { | |
1227 | {.name = "PAL",.id = V4L2_STD_PAL, | |
1228 | .v_offset = 0x17,.v_field = 288, | |
1229 | .h_offset = 0x14,.h_pixels = 680, | |
1230 | .v_max_out = 576,.h_max_out = 768 }, | |
1231 | ||
1232 | {.name = "NTSC",.id = V4L2_STD_NTSC, | |
1233 | .v_offset = 0x16,.v_field = 240, | |
1234 | .h_offset = 0x06,.h_pixels = 708, | |
1235 | .v_max_out = 480,.h_max_out = 640, }, | |
1236 | }; | |
1237 | ||
1238 | static struct saa7146_ext_vv vv_data = { | |
1239 | .inputs = 2, | |
1240 | .capabilities = 0, // perhaps later: V4L2_CAP_VBI_CAPTURE, but that need tweaking with the saa7113 | |
1241 | .flags = 0, | |
1242 | .stds = &standard[0], | |
1243 | .num_stds = sizeof(standard) / sizeof(struct saa7146_standard), | |
1244 | .ioctls = &ioctls[0], | |
1245 | .ioctl = av_ioctl, | |
1246 | }; | |
1247 | ||
1248 | static struct saa7146_extension budget_extension; | |
1249 | ||
1250 | MAKE_BUDGET_INFO(knc1s, "KNC1 DVB-S", BUDGET_KNC1S); | |
1251 | MAKE_BUDGET_INFO(knc1c, "KNC1 DVB-C", BUDGET_KNC1C); | |
1252 | MAKE_BUDGET_INFO(knc1t, "KNC1 DVB-T", BUDGET_KNC1T); | |
f8bf134d | 1253 | MAKE_BUDGET_INFO(kncxs, "KNC TV STAR DVB-S", BUDGET_TVSTAR); |
36f4f334 | 1254 | MAKE_BUDGET_INFO(satewpls, "Satelco EasyWatch DVB-S light", BUDGET_TVSTAR); |
60110ce2 | 1255 | MAKE_BUDGET_INFO(satewpls1, "Satelco EasyWatch DVB-S light", BUDGET_KNC1S); |
c01d1e48 | 1256 | MAKE_BUDGET_INFO(satewplc, "Satelco EasyWatch DVB-C", BUDGET_KNC1CP); |
2d4f2c2e JS |
1257 | MAKE_BUDGET_INFO(knc1sp, "KNC1 DVB-S Plus", BUDGET_KNC1SP); |
1258 | MAKE_BUDGET_INFO(knc1cp, "KNC1 DVB-C Plus", BUDGET_KNC1CP); | |
1259 | MAKE_BUDGET_INFO(knc1tp, "KNC1 DVB-T Plus", BUDGET_KNC1TP); | |
1da177e4 | 1260 | MAKE_BUDGET_INFO(cin1200s, "TerraTec Cinergy 1200 DVB-S", BUDGET_CIN1200S); |
f8bf134d | 1261 | MAKE_BUDGET_INFO(cin1200sn, "TerraTec Cinergy 1200 DVB-S", BUDGET_CIN1200S); |
1da177e4 LT |
1262 | MAKE_BUDGET_INFO(cin1200c, "Terratec Cinergy 1200 DVB-C", BUDGET_CIN1200C); |
1263 | MAKE_BUDGET_INFO(cin1200t, "Terratec Cinergy 1200 DVB-T", BUDGET_CIN1200T); | |
1264 | ||
1265 | static struct pci_device_id pci_tbl[] = { | |
1266 | MAKE_EXTENSION_PCI(knc1s, 0x1131, 0x4f56), | |
2d4f2c2e | 1267 | MAKE_EXTENSION_PCI(knc1s, 0x1131, 0x0010), |
effa791c | 1268 | MAKE_EXTENSION_PCI(knc1s, 0x1894, 0x0010), |
2d4f2c2e | 1269 | MAKE_EXTENSION_PCI(knc1sp, 0x1131, 0x0011), |
4e318bef | 1270 | MAKE_EXTENSION_PCI(knc1sp, 0x1894, 0x0011), |
f8bf134d RP |
1271 | MAKE_EXTENSION_PCI(kncxs, 0x1894, 0x0014), |
1272 | MAKE_EXTENSION_PCI(kncxs, 0x1894, 0x0016), | |
36f4f334 | 1273 | MAKE_EXTENSION_PCI(satewpls, 0x1894, 0x001e), |
60110ce2 | 1274 | MAKE_EXTENSION_PCI(satewpls1, 0x1894, 0x001a), |
c01d1e48 | 1275 | MAKE_EXTENSION_PCI(satewplc, 0x1894, 0x002a), |
1da177e4 | 1276 | MAKE_EXTENSION_PCI(knc1c, 0x1894, 0x0020), |
2d4f2c2e | 1277 | MAKE_EXTENSION_PCI(knc1cp, 0x1894, 0x0021), |
1da177e4 | 1278 | MAKE_EXTENSION_PCI(knc1t, 0x1894, 0x0030), |
2d4f2c2e | 1279 | MAKE_EXTENSION_PCI(knc1tp, 0x1894, 0x0031), |
1da177e4 | 1280 | MAKE_EXTENSION_PCI(cin1200s, 0x153b, 0x1154), |
f8bf134d | 1281 | MAKE_EXTENSION_PCI(cin1200sn, 0x153b, 0x1155), |
1da177e4 LT |
1282 | MAKE_EXTENSION_PCI(cin1200c, 0x153b, 0x1156), |
1283 | MAKE_EXTENSION_PCI(cin1200t, 0x153b, 0x1157), | |
1284 | { | |
1285 | .vendor = 0, | |
1286 | } | |
1287 | }; | |
1288 | ||
1289 | MODULE_DEVICE_TABLE(pci, pci_tbl); | |
1290 | ||
1291 | static struct saa7146_extension budget_extension = { | |
27b05fd2 | 1292 | .name = "budget_av", |
69459f3d OE |
1293 | .flags = SAA7146_I2C_SHORT_DELAY, |
1294 | ||
1da177e4 LT |
1295 | .pci_tbl = pci_tbl, |
1296 | ||
1297 | .module = THIS_MODULE, | |
1298 | .attach = budget_av_attach, | |
1299 | .detach = budget_av_detach, | |
1300 | ||
1301 | .irq_mask = MASK_10, | |
1302 | .irq_func = budget_av_irq, | |
1303 | }; | |
1304 | ||
1305 | static int __init budget_av_init(void) | |
1306 | { | |
1307 | return saa7146_register_extension(&budget_extension); | |
1308 | } | |
1309 | ||
1310 | static void __exit budget_av_exit(void) | |
1311 | { | |
1312 | saa7146_unregister_extension(&budget_extension); | |
1313 | } | |
1314 | ||
1315 | module_init(budget_av_init); | |
1316 | module_exit(budget_av_exit); | |
1317 | ||
1318 | MODULE_LICENSE("GPL"); | |
1319 | MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, Michael Hunold, others"); | |
1320 | MODULE_DESCRIPTION("driver for the SAA7146 based so-called " | |
1321 | "budget PCI DVB w/ analog input and CI-module (e.g. the KNC cards)"); |