Commit | Line | Data |
---|---|---|
cb7a01ac MCC |
1 | # |
2 | # Multimedia Video device configuration | |
3 | # | |
4 | ||
5 | if VIDEO_V4L2 | |
6 | ||
cb7a01ac | 7 | config VIDEO_IR_I2C |
fccea74f | 8 | tristate "I2C module for IR" if !MEDIA_SUBDRV_AUTOSELECT |
cb7a01ac MCC |
9 | depends on I2C && RC_CORE |
10 | default y | |
11 | ---help--- | |
12 | Most boards have an IR chip directly connected via GPIO. However, | |
13 | some video boards have the IR connected via I2C bus. | |
14 | ||
15 | If your board doesn't have an I2C IR chip, you may disable this | |
16 | option. | |
17 | ||
18 | In doubt, say Y. | |
19 | ||
20 | # | |
21 | # Encoder / Decoder module configuration | |
22 | # | |
23 | ||
24 | menu "Encoders, decoders, sensors and other helper chips" | |
fccea74f | 25 | visible if !MEDIA_SUBDRV_AUTOSELECT |
cb7a01ac MCC |
26 | |
27 | comment "Audio decoders, processors and mixers" | |
28 | ||
29 | config VIDEO_TVAUDIO | |
30 | tristate "Simple audio decoder chips" | |
31 | depends on VIDEO_V4L2 && I2C | |
32 | ---help--- | |
33 | Support for several audio decoder chips found on some bt8xx boards: | |
34 | Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300, | |
35 | tea6320, tea6420, tda8425, ta8874z. | |
36 | Microchip: pic16c54 based design on ProVideo PV951 board. | |
37 | ||
38 | To compile this driver as a module, choose M here: the | |
39 | module will be called tvaudio. | |
40 | ||
41 | config VIDEO_TDA7432 | |
42 | tristate "Philips TDA7432 audio processor" | |
43 | depends on VIDEO_V4L2 && I2C | |
44 | ---help--- | |
45 | Support for tda7432 audio decoder chip found on some bt8xx boards. | |
46 | ||
47 | To compile this driver as a module, choose M here: the | |
48 | module will be called tda7432. | |
49 | ||
50 | config VIDEO_TDA9840 | |
51 | tristate "Philips TDA9840 audio processor" | |
52 | depends on I2C | |
53 | ---help--- | |
54 | Support for tda9840 audio decoder chip found on some Zoran boards. | |
55 | ||
56 | To compile this driver as a module, choose M here: the | |
57 | module will be called tda9840. | |
58 | ||
59 | config VIDEO_TEA6415C | |
60 | tristate "Philips TEA6415C audio processor" | |
61 | depends on I2C | |
62 | ---help--- | |
63 | Support for tea6415c audio decoder chip found on some bt8xx boards. | |
64 | ||
65 | To compile this driver as a module, choose M here: the | |
66 | module will be called tea6415c. | |
67 | ||
68 | config VIDEO_TEA6420 | |
69 | tristate "Philips TEA6420 audio processor" | |
70 | depends on I2C | |
71 | ---help--- | |
72 | Support for tea6420 audio decoder chip found on some bt8xx boards. | |
73 | ||
74 | To compile this driver as a module, choose M here: the | |
75 | module will be called tea6420. | |
76 | ||
77 | config VIDEO_MSP3400 | |
78 | tristate "Micronas MSP34xx audio decoders" | |
79 | depends on VIDEO_V4L2 && I2C | |
80 | ---help--- | |
81 | Support for the Micronas MSP34xx series of audio decoders. | |
82 | ||
83 | To compile this driver as a module, choose M here: the | |
84 | module will be called msp3400. | |
85 | ||
86 | config VIDEO_CS5345 | |
87 | tristate "Cirrus Logic CS5345 audio ADC" | |
88 | depends on VIDEO_V4L2 && I2C | |
89 | ---help--- | |
90 | Support for the Cirrus Logic CS5345 24-bit, 192 kHz | |
91 | stereo A/D converter. | |
92 | ||
93 | To compile this driver as a module, choose M here: the | |
94 | module will be called cs5345. | |
95 | ||
96 | config VIDEO_CS53L32A | |
97 | tristate "Cirrus Logic CS53L32A audio ADC" | |
98 | depends on VIDEO_V4L2 && I2C | |
99 | ---help--- | |
100 | Support for the Cirrus Logic CS53L32A low voltage | |
101 | stereo A/D converter. | |
102 | ||
103 | To compile this driver as a module, choose M here: the | |
104 | module will be called cs53l32a. | |
105 | ||
106 | config VIDEO_TLV320AIC23B | |
107 | tristate "Texas Instruments TLV320AIC23B audio codec" | |
2cca7d4e | 108 | depends on VIDEO_V4L2 && I2C |
cb7a01ac MCC |
109 | ---help--- |
110 | Support for the Texas Instruments TLV320AIC23B audio codec. | |
111 | ||
112 | To compile this driver as a module, choose M here: the | |
113 | module will be called tlv320aic23b. | |
114 | ||
73d9f979 HV |
115 | config VIDEO_UDA1342 |
116 | tristate "Philips UDA1342 audio codec" | |
117 | depends on VIDEO_V4L2 && I2C | |
118 | ---help--- | |
119 | Support for the Philips UDA1342 audio codec. | |
120 | ||
121 | To compile this driver as a module, choose M here: the | |
122 | module will be called uda1342. | |
123 | ||
cb7a01ac MCC |
124 | config VIDEO_WM8775 |
125 | tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer" | |
126 | depends on VIDEO_V4L2 && I2C | |
127 | ---help--- | |
128 | Support for the Wolfson Microelectronics WM8775 high | |
129 | performance stereo A/D Converter with a 4 channel input mixer. | |
130 | ||
131 | To compile this driver as a module, choose M here: the | |
132 | module will be called wm8775. | |
133 | ||
134 | config VIDEO_WM8739 | |
135 | tristate "Wolfson Microelectronics WM8739 stereo audio ADC" | |
136 | depends on VIDEO_V4L2 && I2C | |
137 | ---help--- | |
138 | Support for the Wolfson Microelectronics WM8739 | |
139 | stereo A/D Converter. | |
140 | ||
141 | To compile this driver as a module, choose M here: the | |
142 | module will be called wm8739. | |
143 | ||
144 | config VIDEO_VP27SMPX | |
c7c54a98 | 145 | tristate "Panasonic VP27's internal MPX" |
cb7a01ac MCC |
146 | depends on VIDEO_V4L2 && I2C |
147 | ---help--- | |
148 | Support for the internal MPX of the Panasonic VP27s tuner. | |
149 | ||
150 | To compile this driver as a module, choose M here: the | |
151 | module will be called vp27smpx. | |
152 | ||
c7c54a98 HV |
153 | config VIDEO_SONY_BTF_MPX |
154 | tristate "Sony BTF's internal MPX" | |
155 | depends on VIDEO_V4L2 && I2C | |
156 | help | |
157 | Support for the internal MPX of the Sony BTF-PG472Z tuner. | |
158 | ||
159 | To compile this driver as a module, choose M here: the | |
160 | module will be called sony-btf-mpx. | |
161 | ||
cb7a01ac MCC |
162 | comment "RDS decoders" |
163 | ||
164 | config VIDEO_SAA6588 | |
165 | tristate "SAA6588 Radio Chip RDS decoder support" | |
166 | depends on VIDEO_V4L2 && I2C | |
167 | ||
168 | help | |
169 | Support for this Radio Data System (RDS) decoder. This allows | |
170 | seeing radio station identification transmitted using this | |
171 | standard. | |
172 | ||
173 | To compile this driver as a module, choose M here: the | |
174 | module will be called saa6588. | |
175 | ||
176 | comment "Video decoders" | |
177 | ||
178 | config VIDEO_ADV7180 | |
179 | tristate "Analog Devices ADV7180 decoder" | |
180 | depends on VIDEO_V4L2 && I2C | |
181 | ---help--- | |
182 | Support for the Analog Devices ADV7180 video decoder. | |
183 | ||
184 | To compile this driver as a module, choose M here: the | |
185 | module will be called adv7180. | |
186 | ||
187 | config VIDEO_ADV7183 | |
188 | tristate "Analog Devices ADV7183 decoder" | |
189 | depends on VIDEO_V4L2 && I2C | |
190 | ---help--- | |
191 | V4l2 subdevice driver for the Analog Devices | |
192 | ADV7183 video decoder. | |
193 | ||
194 | To compile this driver as a module, choose M here: the | |
195 | module will be called adv7183. | |
196 | ||
54450f59 HV |
197 | config VIDEO_ADV7604 |
198 | tristate "Analog Devices ADV7604 decoder" | |
584ca025 | 199 | depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API |
54450f59 HV |
200 | ---help--- |
201 | Support for the Analog Devices ADV7604 video decoder. | |
202 | ||
203 | This is a Analog Devices Component/Graphics Digitizer | |
204 | with 4:1 Multiplexed HDMI Receiver. | |
205 | ||
206 | To compile this driver as a module, choose M here: the | |
207 | module will be called adv7604. | |
208 | ||
a89bcd4c HV |
209 | config VIDEO_ADV7842 |
210 | tristate "Analog Devices ADV7842 decoder" | |
584ca025 | 211 | depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API |
a89bcd4c HV |
212 | ---help--- |
213 | Support for the Analog Devices ADV7842 video decoder. | |
214 | ||
215 | This is a Analog Devices Component/Graphics/SD Digitizer | |
216 | with 2:1 Multiplexed HDMI Receiver. | |
217 | ||
218 | To compile this driver as a module, choose M here: the | |
219 | module will be called adv7842. | |
220 | ||
cb7a01ac MCC |
221 | config VIDEO_BT819 |
222 | tristate "BT819A VideoStream decoder" | |
223 | depends on VIDEO_V4L2 && I2C | |
224 | ---help--- | |
225 | Support for BT819A video decoder. | |
226 | ||
227 | To compile this driver as a module, choose M here: the | |
228 | module will be called bt819. | |
229 | ||
230 | config VIDEO_BT856 | |
231 | tristate "BT856 VideoStream decoder" | |
232 | depends on VIDEO_V4L2 && I2C | |
233 | ---help--- | |
234 | Support for BT856 video decoder. | |
235 | ||
236 | To compile this driver as a module, choose M here: the | |
237 | module will be called bt856. | |
238 | ||
239 | config VIDEO_BT866 | |
240 | tristate "BT866 VideoStream decoder" | |
241 | depends on VIDEO_V4L2 && I2C | |
242 | ---help--- | |
243 | Support for BT866 video decoder. | |
244 | ||
245 | To compile this driver as a module, choose M here: the | |
246 | module will be called bt866. | |
247 | ||
248 | config VIDEO_KS0127 | |
249 | tristate "KS0127 video decoder" | |
250 | depends on VIDEO_V4L2 && I2C | |
251 | ---help--- | |
252 | Support for KS0127 video decoder. | |
253 | ||
254 | This chip is used on AverMedia AVS6EYES Zoran-based MJPEG | |
255 | cards. | |
256 | ||
257 | To compile this driver as a module, choose M here: the | |
258 | module will be called ks0127. | |
259 | ||
ed3e12d2 VB |
260 | config VIDEO_ML86V7667 |
261 | tristate "OKI ML86V7667 video decoder" | |
262 | depends on VIDEO_V4L2 && I2C | |
263 | ---help--- | |
264 | Support for the OKI Semiconductor ML86V7667 video decoder. | |
265 | ||
266 | To compile this driver as a module, choose M here: the | |
267 | module will be called ml86v7667. | |
268 | ||
cb7a01ac MCC |
269 | config VIDEO_SAA7110 |
270 | tristate "Philips SAA7110 video decoder" | |
271 | depends on VIDEO_V4L2 && I2C | |
272 | ---help--- | |
273 | Support for the Philips SAA7110 video decoders. | |
274 | ||
275 | To compile this driver as a module, choose M here: the | |
276 | module will be called saa7110. | |
277 | ||
278 | config VIDEO_SAA711X | |
279 | tristate "Philips SAA7111/3/4/5 video decoders" | |
280 | depends on VIDEO_V4L2 && I2C | |
281 | ---help--- | |
282 | Support for the Philips SAA7111/3/4/5 video decoders. | |
283 | ||
284 | To compile this driver as a module, choose M here: the | |
285 | module will be called saa7115. | |
286 | ||
cb7a01ac MCC |
287 | config VIDEO_TVP514X |
288 | tristate "Texas Instruments TVP514x video decoder" | |
289 | depends on VIDEO_V4L2 && I2C | |
290 | ---help--- | |
291 | This is a Video4Linux2 sensor-level driver for the TI TVP5146/47 | |
292 | decoder. It is currently working with the TI OMAP3 camera | |
293 | controller. | |
294 | ||
295 | To compile this driver as a module, choose M here: the | |
296 | module will be called tvp514x. | |
297 | ||
298 | config VIDEO_TVP5150 | |
299 | tristate "Texas Instruments TVP5150 video decoder" | |
300 | depends on VIDEO_V4L2 && I2C | |
301 | ---help--- | |
302 | Support for the Texas Instruments TVP5150 video decoder. | |
303 | ||
304 | To compile this driver as a module, choose M here: the | |
305 | module will be called tvp5150. | |
306 | ||
307 | config VIDEO_TVP7002 | |
308 | tristate "Texas Instruments TVP7002 video decoder" | |
309 | depends on VIDEO_V4L2 && I2C | |
310 | ---help--- | |
311 | Support for the Texas Instruments TVP7002 video decoder. | |
312 | ||
313 | To compile this driver as a module, choose M here: the | |
314 | module will be called tvp7002. | |
315 | ||
12be52a9 HV |
316 | config VIDEO_TW2804 |
317 | tristate "Techwell TW2804 multiple video decoder" | |
318 | depends on VIDEO_V4L2 && I2C | |
319 | ---help--- | |
320 | Support for the Techwell tw2804 multiple video decoder. | |
321 | ||
322 | To compile this driver as a module, choose M here: the | |
323 | module will be called tw2804. | |
324 | ||
0890ec19 HV |
325 | config VIDEO_TW9903 |
326 | tristate "Techwell TW9903 video decoder" | |
327 | depends on VIDEO_V4L2 && I2C | |
328 | ---help--- | |
12be52a9 | 329 | Support for the Techwell tw9903 multi-standard video decoder |
0890ec19 HV |
330 | with high quality down scaler. |
331 | ||
332 | To compile this driver as a module, choose M here: the | |
333 | module will be called tw9903. | |
334 | ||
a000e9a0 HV |
335 | config VIDEO_TW9906 |
336 | tristate "Techwell TW9906 video decoder" | |
337 | depends on VIDEO_V4L2 && I2C | |
338 | ---help--- | |
339 | Support for the Techwell tw9906 enhanced multi-standard comb filter | |
340 | video decoder with YCbCr input support. | |
341 | ||
342 | To compile this driver as a module, choose M here: the | |
343 | module will be called tw9906. | |
344 | ||
cb7a01ac MCC |
345 | config VIDEO_VPX3220 |
346 | tristate "vpx3220a, vpx3216b & vpx3214c video decoders" | |
347 | depends on VIDEO_V4L2 && I2C | |
348 | ---help--- | |
349 | Support for VPX322x video decoders. | |
350 | ||
351 | To compile this driver as a module, choose M here: the | |
352 | module will be called vpx3220. | |
353 | ||
354 | comment "Video and audio decoders" | |
355 | ||
356 | config VIDEO_SAA717X | |
357 | tristate "Philips SAA7171/3/4 audio/video decoders" | |
358 | depends on VIDEO_V4L2 && I2C | |
359 | ---help--- | |
360 | Support for the Philips SAA7171/3/4 audio/video decoders. | |
361 | ||
362 | To compile this driver as a module, choose M here: the | |
363 | module will be called saa717x. | |
364 | ||
365 | source "drivers/media/i2c/cx25840/Kconfig" | |
366 | ||
cb7a01ac MCC |
367 | comment "Video encoders" |
368 | ||
369 | config VIDEO_SAA7127 | |
370 | tristate "Philips SAA7127/9 digital video encoders" | |
371 | depends on VIDEO_V4L2 && I2C | |
372 | ---help--- | |
373 | Support for the Philips SAA7127/9 digital video encoders. | |
374 | ||
375 | To compile this driver as a module, choose M here: the | |
376 | module will be called saa7127. | |
377 | ||
378 | config VIDEO_SAA7185 | |
379 | tristate "Philips SAA7185 video encoder" | |
380 | depends on VIDEO_V4L2 && I2C | |
381 | ---help--- | |
382 | Support for the Philips SAA7185 video encoder. | |
383 | ||
384 | To compile this driver as a module, choose M here: the | |
385 | module will be called saa7185. | |
386 | ||
387 | config VIDEO_ADV7170 | |
388 | tristate "Analog Devices ADV7170 video encoder" | |
389 | depends on VIDEO_V4L2 && I2C | |
390 | ---help--- | |
391 | Support for the Analog Devices ADV7170 video encoder driver | |
392 | ||
393 | To compile this driver as a module, choose M here: the | |
394 | module will be called adv7170. | |
395 | ||
396 | config VIDEO_ADV7175 | |
397 | tristate "Analog Devices ADV7175 video encoder" | |
398 | depends on VIDEO_V4L2 && I2C | |
399 | ---help--- | |
400 | Support for the Analog Devices ADV7175 video encoder driver | |
401 | ||
402 | To compile this driver as a module, choose M here: the | |
403 | module will be called adv7175. | |
404 | ||
405 | config VIDEO_ADV7343 | |
406 | tristate "ADV7343 video encoder" | |
407 | depends on I2C | |
408 | help | |
409 | Support for Analog Devices I2C bus based ADV7343 encoder. | |
410 | ||
411 | To compile this driver as a module, choose M here: the | |
412 | module will be called adv7343. | |
413 | ||
414 | config VIDEO_ADV7393 | |
415 | tristate "ADV7393 video encoder" | |
416 | depends on I2C | |
417 | help | |
418 | Support for Analog Devices I2C bus based ADV7393 encoder. | |
419 | ||
420 | To compile this driver as a module, choose M here: the | |
421 | module will be called adv7393. | |
422 | ||
5a544cce HV |
423 | config VIDEO_ADV7511 |
424 | tristate "Analog Devices ADV7511 encoder" | |
584ca025 | 425 | depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API |
5a544cce HV |
426 | ---help--- |
427 | Support for the Analog Devices ADV7511 video encoder. | |
428 | ||
429 | This is a Analog Devices HDMI transmitter. | |
430 | ||
431 | To compile this driver as a module, choose M here: the | |
432 | module will be called adv7511. | |
433 | ||
117a55b6 HV |
434 | config VIDEO_AD9389B |
435 | tristate "Analog Devices AD9389B encoder" | |
436 | depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API | |
437 | ---help--- | |
438 | Support for the Analog Devices AD9389B video encoder. | |
439 | ||
440 | This is a Analog Devices HDMI transmitter. | |
441 | ||
442 | To compile this driver as a module, choose M here: the | |
443 | module will be called ad9389b. | |
444 | ||
cb7a01ac MCC |
445 | config VIDEO_AK881X |
446 | tristate "AK8813/AK8814 video encoders" | |
447 | depends on I2C | |
448 | help | |
449 | Video output driver for AKM AK8813 and AK8814 TV encoders | |
450 | ||
14735190 HV |
451 | config VIDEO_THS8200 |
452 | tristate "Texas Instruments THS8200 video encoder" | |
453 | depends on VIDEO_V4L2 && I2C | |
454 | ---help--- | |
455 | Support for the Texas Instruments THS8200 video encoder. | |
456 | ||
457 | To compile this driver as a module, choose M here: the | |
458 | module will be called ths8200. | |
459 | ||
cb7a01ac MCC |
460 | comment "Camera sensor devices" |
461 | ||
462 | config VIDEO_APTINA_PLL | |
463 | tristate | |
464 | ||
465 | config VIDEO_SMIAPP_PLL | |
466 | tristate | |
467 | ||
ec367c3c HV |
468 | config VIDEO_OV7640 |
469 | tristate "OmniVision OV7640 sensor support" | |
470 | depends on I2C && VIDEO_V4L2 | |
471 | depends on MEDIA_CAMERA_SUPPORT | |
472 | ---help--- | |
473 | This is a Video4Linux2 sensor-level driver for the OmniVision | |
474 | OV7640 camera. | |
475 | ||
476 | To compile this driver as a module, choose M here: the | |
477 | module will be called ov7640. | |
478 | ||
cb7a01ac MCC |
479 | config VIDEO_OV7670 |
480 | tristate "OmniVision OV7670 sensor support" | |
481 | depends on I2C && VIDEO_V4L2 | |
482 | depends on MEDIA_CAMERA_SUPPORT | |
483 | ---help--- | |
484 | This is a Video4Linux2 sensor-level driver for the OmniVision | |
485 | OV7670 VGA camera. It currently only works with the M88ALP01 | |
486 | controller. | |
487 | ||
84a15ded SN |
488 | config VIDEO_OV9650 |
489 | tristate "OmniVision OV9650/OV9652 sensor support" | |
490 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
491 | ---help--- | |
492 | This is a V4L2 sensor-level driver for the Omnivision | |
493 | OV9650 and OV9652 camera sensors. | |
494 | ||
cb7a01ac MCC |
495 | config VIDEO_VS6624 |
496 | tristate "ST VS6624 sensor support" | |
497 | depends on VIDEO_V4L2 && I2C | |
498 | depends on MEDIA_CAMERA_SUPPORT | |
499 | ---help--- | |
500 | This is a Video4Linux2 sensor-level driver for the ST VS6624 | |
501 | camera. | |
502 | ||
503 | To compile this driver as a module, choose M here: the | |
504 | module will be called vs6624. | |
505 | ||
506 | config VIDEO_MT9M032 | |
507 | tristate "MT9M032 camera sensor support" | |
508 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
509 | depends on MEDIA_CAMERA_SUPPORT | |
510 | select VIDEO_APTINA_PLL | |
511 | ---help--- | |
512 | This driver supports MT9M032 camera sensors from Aptina, monochrome | |
513 | models only. | |
514 | ||
515 | config VIDEO_MT9P031 | |
516 | tristate "Aptina MT9P031 support" | |
517 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
518 | depends on MEDIA_CAMERA_SUPPORT | |
519 | select VIDEO_APTINA_PLL | |
520 | ---help--- | |
521 | This is a Video4Linux2 sensor-level driver for the Aptina | |
522 | (Micron) mt9p031 5 Mpixel camera. | |
523 | ||
524 | config VIDEO_MT9T001 | |
525 | tristate "Aptina MT9T001 support" | |
526 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
527 | depends on MEDIA_CAMERA_SUPPORT | |
528 | ---help--- | |
529 | This is a Video4Linux2 sensor-level driver for the Aptina | |
530 | (Micron) mt0t001 3 Mpixel camera. | |
531 | ||
532 | config VIDEO_MT9V011 | |
533 | tristate "Micron mt9v011 sensor support" | |
534 | depends on I2C && VIDEO_V4L2 | |
535 | depends on MEDIA_CAMERA_SUPPORT | |
536 | ---help--- | |
537 | This is a Video4Linux2 sensor-level driver for the Micron | |
538 | mt0v011 1.3 Mpixel camera. It currently only works with the | |
539 | em28xx driver. | |
540 | ||
541 | config VIDEO_MT9V032 | |
542 | tristate "Micron MT9V032 sensor support" | |
543 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
544 | depends on MEDIA_CAMERA_SUPPORT | |
80b44ef2 | 545 | select REGMAP_I2C |
cb7a01ac MCC |
546 | ---help--- |
547 | This is a Video4Linux2 sensor-level driver for the Micron | |
548 | MT9V032 752x480 CMOS sensor. | |
549 | ||
cb7a01ac MCC |
550 | config VIDEO_SR030PC30 |
551 | tristate "Siliconfile SR030PC30 sensor support" | |
552 | depends on I2C && VIDEO_V4L2 | |
553 | depends on MEDIA_CAMERA_SUPPORT | |
554 | ---help--- | |
555 | This driver supports SR030PC30 VGA camera from Siliconfile | |
556 | ||
557 | config VIDEO_NOON010PC30 | |
558 | tristate "Siliconfile NOON010PC30 sensor support" | |
2cca7d4e | 559 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API |
cb7a01ac MCC |
560 | depends on MEDIA_CAMERA_SUPPORT |
561 | ---help--- | |
562 | This driver supports NOON010PC30 CIF camera from Siliconfile | |
563 | ||
564 | source "drivers/media/i2c/m5mols/Kconfig" | |
565 | ||
566 | config VIDEO_S5K6AA | |
567 | tristate "Samsung S5K6AAFX sensor support" | |
568 | depends on MEDIA_CAMERA_SUPPORT | |
569 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
570 | ---help--- | |
571 | This is a V4L2 sensor-level driver for Samsung S5K6AA(FX) 1.3M | |
572 | camera sensor with an embedded SoC image signal processor. | |
573 | ||
814b4dd9 SN |
574 | config VIDEO_S5K6A3 |
575 | tristate "Samsung S5K6A3 sensor support" | |
576 | depends on MEDIA_CAMERA_SUPPORT | |
577 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
578 | ---help--- | |
579 | This is a V4L2 sensor-level driver for Samsung S5K6A3 raw | |
580 | camera sensor. | |
581 | ||
8b99312b SL |
582 | config VIDEO_S5K4ECGX |
583 | tristate "Samsung S5K4ECGX sensor support" | |
584 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
585 | ---help--- | |
586 | This is a V4L2 sensor-level driver for Samsung S5K4ECGX 5M | |
587 | camera sensor with an embedded SoC image signal processor. | |
588 | ||
7d459937 AH |
589 | config VIDEO_S5K5BAF |
590 | tristate "Samsung S5K5BAF sensor support" | |
591 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
592 | ---help--- | |
593 | This is a V4L2 sensor-level driver for Samsung S5K5BAF 2M | |
594 | camera sensor with an embedded SoC image signal processor. | |
595 | ||
cb7a01ac MCC |
596 | source "drivers/media/i2c/smiapp/Kconfig" |
597 | ||
cac47f18 AH |
598 | config VIDEO_S5C73M3 |
599 | tristate "Samsung S5C73M3 sensor support" | |
600 | depends on I2C && SPI && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
601 | ---help--- | |
4494f0fd GG |
602 | This is a V4L2 sensor-level driver for Samsung S5C73M3 |
603 | 8 Mpixel camera. | |
cac47f18 | 604 | |
cb7a01ac MCC |
605 | comment "Flash devices" |
606 | ||
607 | config VIDEO_ADP1653 | |
608 | tristate "ADP1653 flash support" | |
609 | depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER | |
610 | depends on MEDIA_CAMERA_SUPPORT | |
611 | ---help--- | |
612 | This is a driver for the ADP1653 flash controller. It is used for | |
613 | example in Nokia N900. | |
614 | ||
615 | config VIDEO_AS3645A | |
616 | tristate "AS3645A flash driver support" | |
617 | depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER | |
618 | depends on MEDIA_CAMERA_SUPPORT | |
619 | ---help--- | |
620 | This is a driver for the AS3645A and LM3555 flash controllers. It has | |
621 | build in control for flash, torch and indicator LEDs. | |
622 | ||
7f6b11a1 DJ |
623 | config VIDEO_LM3560 |
624 | tristate "LM3560 dual flash driver support" | |
625 | depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER | |
626 | depends on MEDIA_CAMERA_SUPPORT | |
627 | select REGMAP_I2C | |
628 | ---help--- | |
629 | This is a driver for the lm3560 dual flash controllers. It controls | |
630 | flash, torch LEDs. | |
631 | ||
dc76df5d DJ |
632 | config VIDEO_LM3646 |
633 | tristate "LM3646 dual flash driver support" | |
634 | depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER | |
635 | depends on MEDIA_CAMERA_SUPPORT | |
636 | select REGMAP_I2C | |
637 | ---help--- | |
638 | This is a driver for the lm3646 dual flash controllers. It controls | |
639 | flash, torch LEDs. | |
640 | ||
cb7a01ac MCC |
641 | comment "Video improvement chips" |
642 | ||
643 | config VIDEO_UPD64031A | |
644 | tristate "NEC Electronics uPD64031A Ghost Reduction" | |
645 | depends on VIDEO_V4L2 && I2C | |
646 | ---help--- | |
647 | Support for the NEC Electronics uPD64031A Ghost Reduction | |
648 | video chip. It is most often found in NTSC TV cards made for | |
649 | Japan and is used to reduce the 'ghosting' effect that can | |
650 | be present in analog TV broadcasts. | |
651 | ||
652 | To compile this driver as a module, choose M here: the | |
653 | module will be called upd64031a. | |
654 | ||
655 | config VIDEO_UPD64083 | |
656 | tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation" | |
657 | depends on VIDEO_V4L2 && I2C | |
658 | ---help--- | |
659 | Support for the NEC Electronics uPD64083 3-Dimensional Y/C | |
660 | separation video chip. It is used to improve the quality of | |
661 | the colors of a composite signal. | |
662 | ||
663 | To compile this driver as a module, choose M here: the | |
664 | module will be called upd64083. | |
665 | ||
6052ba35 HV |
666 | comment "Audio/Video compression chips" |
667 | ||
668 | config VIDEO_SAA6752HS | |
669 | tristate "Philips SAA6752HS MPEG-2 Audio/Video Encoder" | |
670 | depends on VIDEO_V4L2 && I2C | |
d984d325 | 671 | select CRC32 |
6052ba35 HV |
672 | ---help--- |
673 | Support for the Philips SAA6752HS MPEG-2 video and MPEG-audio/AC-3 | |
674 | audio encoder with multiplexer. | |
675 | ||
676 | To compile this driver as a module, choose M here: the | |
677 | module will be called saa6752hs. | |
678 | ||
8c88126b | 679 | comment "Miscellaneous helper chips" |
cb7a01ac MCC |
680 | |
681 | config VIDEO_THS7303 | |
88da0183 LP |
682 | tristate "THS7303/53 Video Amplifier" |
683 | depends on VIDEO_V4L2 && I2C | |
cb7a01ac | 684 | help |
88da0183 | 685 | Support for TI THS7303/53 video amplifier |
cb7a01ac MCC |
686 | |
687 | To compile this driver as a module, choose M here: the | |
688 | module will be called ths7303. | |
689 | ||
690 | config VIDEO_M52790 | |
691 | tristate "Mitsubishi M52790 A/V switch" | |
692 | depends on VIDEO_V4L2 && I2C | |
693 | ---help--- | |
694 | Support for the Mitsubishi M52790 A/V switch. | |
695 | ||
696 | To compile this driver as a module, choose M here: the | |
697 | module will be called m52790. | |
fccea74f | 698 | endmenu |
e9d2f057 | 699 | |
fccea74f | 700 | menu "Sensors used on soc_camera driver" |
cb7a01ac | 701 | |
2a2d1cf4 MCC |
702 | if SOC_CAMERA |
703 | source "drivers/media/i2c/soc_camera/Kconfig" | |
704 | endif | |
705 | ||
cb7a01ac | 706 | endmenu |
fccea74f | 707 | |
cb7a01ac | 708 | endif |