Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | # |
2 | # Multimedia Video device configuration | |
3 | # | |
4 | ||
c5da5afb JE |
5 | menuconfig RADIO_ADAPTERS |
6 | bool "Radio Adapters" | |
057596ee | 7 | depends on VIDEO_V4L2 |
724f4a32 | 8 | depends on MEDIA_RADIO_SUPPORT |
c5da5afb | 9 | default y |
ff01652c MCC |
10 | ---help--- |
11 | Say Y here to enable selecting AM/FM radio adapters. | |
c5da5afb | 12 | |
057596ee | 13 | if RADIO_ADAPTERS && VIDEO_V4L2 |
1da177e4 | 14 | |
e21d9865 HV |
15 | config RADIO_SI470X |
16 | bool "Silicon Labs Si470x FM Radio Receiver support" | |
17 | depends on VIDEO_V4L2 | |
18 | ||
19 | source "drivers/media/radio/si470x/Kconfig" | |
20 | ||
21 | config USB_MR800 | |
22 | tristate "AverMedia MR 800 USB FM radio support" | |
23 | depends on USB && VIDEO_V4L2 | |
24 | ---help--- | |
25 | Say Y here if you want to connect this type of radio to your | |
26 | computer's USB port. Note that the audio is not digital, and | |
27 | you must connect the line out connector to a sound card or a | |
28 | set of speakers. | |
29 | ||
30 | To compile this driver as a module, choose M here: the | |
31 | module will be called radio-mr800. | |
32 | ||
33 | config USB_DSBR | |
34 | tristate "D-Link/GemTek USB FM radio support" | |
35 | depends on USB && VIDEO_V4L2 | |
36 | ---help--- | |
37 | Say Y here if you want to connect this type of radio to your | |
38 | computer's USB port. Note that the audio is not digital, and | |
39 | you must connect the line out connector to a sound card or a | |
40 | set of speakers. | |
41 | ||
42 | To compile this driver as a module, choose M here: the | |
43 | module will be called dsbr100. | |
44 | ||
45 | config RADIO_MAXIRADIO | |
46 | tristate "Guillemot MAXI Radio FM 2000 radio" | |
cfb19b0a | 47 | depends on VIDEO_V4L2 && PCI && SND |
e21d9865 HV |
48 | ---help--- |
49 | Choose Y here if you have this radio card. This card may also be | |
50 | found as Gemtek PCI FM. | |
51 | ||
52 | In order to control your radio card, you will need to use programs | |
53 | that are compatible with the Video For Linux API. Information on | |
54 | this API and pointers to "v4l" programs may be found at | |
55 | <file:Documentation/video4linux/API.html>. | |
56 | ||
57 | To compile this driver as a module, choose M here: the | |
58 | module will be called radio-maxiradio. | |
59 | ||
8e2ce73e HG |
60 | config RADIO_SHARK |
61 | tristate "Griffin radioSHARK USB radio receiver" | |
62 | depends on USB && SND | |
63 | ---help--- | |
64 | Choose Y here if you have this radio receiver. | |
65 | ||
66 | There are 2 versions of this device, this driver is for version 1, | |
67 | which is white. | |
68 | ||
69 | In order to control your radio card, you will need to use programs | |
70 | that are compatible with the Video For Linux API. Information on | |
71 | this API and pointers to "v4l" programs may be found at | |
72 | <file:Documentation/video4linux/API.html>. | |
73 | ||
74 | To compile this driver as a module, choose M here: the | |
75 | module will be called radio-shark. | |
e21d9865 | 76 | |
4faba767 HG |
77 | config RADIO_SHARK2 |
78 | tristate "Griffin radioSHARK2 USB radio receiver" | |
79 | depends on USB | |
80 | ---help--- | |
81 | Choose Y here if you have this radio receiver. | |
82 | ||
83 | There are 2 versions of this device, this driver is for version 2, | |
84 | which is black. | |
85 | ||
86 | In order to control your radio card, you will need to use programs | |
87 | that are compatible with the Video For Linux API. Information on | |
88 | this API and pointers to "v4l" programs may be found at | |
89 | <file:Documentation/video4linux/API.html>. | |
90 | ||
91 | To compile this driver as a module, choose M here: the | |
92 | module will be called radio-shark2. | |
93 | ||
e21d9865 HV |
94 | config I2C_SI4713 |
95 | tristate "I2C driver for Silicon Labs Si4713 device" | |
96 | depends on I2C && VIDEO_V4L2 | |
97 | ---help--- | |
98 | Say Y here if you want support to Si4713 I2C device. | |
99 | This device driver supports only i2c bus. | |
100 | ||
101 | To compile this driver as a module, choose M here: the | |
102 | module will be called si4713. | |
103 | ||
104 | config RADIO_SI4713 | |
105 | tristate "Silicon Labs Si4713 FM Radio Transmitter support" | |
106 | depends on I2C && VIDEO_V4L2 | |
107 | select I2C_SI4713 | |
108 | ---help--- | |
109 | Say Y here if you want support to Si4713 FM Radio Transmitter. | |
110 | This device can transmit audio through FM. It can transmit | |
111 | RDS and RBDS signals as well. This module is the v4l2 radio | |
112 | interface for the i2c driver of this device. | |
113 | ||
114 | To compile this driver as a module, choose M here: the | |
115 | module will be called radio-si4713. | |
116 | ||
1bf20c3a HV |
117 | config USB_KEENE |
118 | tristate "Keene FM Transmitter USB support" | |
119 | depends on USB && VIDEO_V4L2 | |
120 | ---help--- | |
121 | Say Y here if you want to connect this type of FM transmitter | |
122 | to your computer's USB port. | |
123 | ||
124 | To compile this driver as a module, choose M here: the | |
125 | module will be called radio-keene. | |
126 | ||
e21d9865 HV |
127 | config RADIO_TEA5764 |
128 | tristate "TEA5764 I2C FM radio support" | |
129 | depends on I2C && VIDEO_V4L2 | |
130 | ---help--- | |
131 | Say Y here if you want to use the TEA5764 FM chip found in | |
132 | EZX phones. This FM chip is present in EZX phones from Motorola, | |
133 | connected to internal pxa I2C bus. | |
134 | ||
135 | To compile this driver as a module, choose M here: the | |
136 | module will be called radio-tea5764. | |
137 | ||
138 | config RADIO_TEA5764_XTAL | |
139 | bool "TEA5764 crystal reference" | |
140 | depends on RADIO_TEA5764=y | |
141 | default y | |
142 | help | |
143 | Say Y here if TEA5764 have a 32768 Hz crystal in circuit, say N | |
144 | here if TEA5764 reference frequency is connected in FREQIN. | |
145 | ||
146 | config RADIO_SAA7706H | |
147 | tristate "SAA7706H Car Radio DSP" | |
148 | depends on I2C && VIDEO_V4L2 | |
149 | ---help--- | |
150 | Say Y here if you want to use the SAA7706H Car radio Digital | |
151 | Signal Processor, found for instance on the Russellville development | |
152 | board. On the russellville the device is connected to internal | |
153 | timberdale I2C bus. | |
154 | ||
155 | To compile this driver as a module, choose M here: the | |
156 | module will be called SAA7706H. | |
157 | ||
158 | config RADIO_TEF6862 | |
159 | tristate "TEF6862 Car Radio Enhanced Selectivity Tuner" | |
160 | depends on I2C && VIDEO_V4L2 | |
161 | ---help--- | |
162 | Say Y here if you want to use the TEF6862 Car Radio Enhanced | |
163 | Selectivity Tuner, found for instance on the Russellville development | |
164 | board. On the russellville the device is connected to internal | |
165 | timberdale I2C bus. | |
166 | ||
167 | To compile this driver as a module, choose M here: the | |
168 | module will be called TEF6862. | |
169 | ||
170 | config RADIO_TIMBERDALE | |
171 | tristate "Enable the Timberdale radio driver" | |
172 | depends on MFD_TIMBERDALE && VIDEO_V4L2 | |
173 | depends on I2C # for RADIO_SAA7706H | |
174 | select RADIO_TEF6862 | |
175 | select RADIO_SAA7706H | |
176 | ---help--- | |
177 | This is a kind of umbrella driver for the Radio Tuner and DSP | |
178 | found behind the Timberdale FPGA on the Russellville board. | |
179 | Enabling this driver will automatically select the DSP and tuner. | |
180 | ||
181 | config RADIO_WL1273 | |
182 | tristate "Texas Instruments WL1273 I2C FM Radio" | |
183 | depends on I2C && VIDEO_V4L2 | |
184 | select MFD_CORE | |
185 | select MFD_WL1273_CORE | |
186 | select FW_LOADER | |
187 | ---help--- | |
188 | Choose Y here if you have this FM radio chip. | |
189 | ||
190 | In order to control your radio card, you will need to use programs | |
191 | that are compatible with the Video For Linux 2 API. Information on | |
192 | this API and pointers to "v4l2" programs may be found at | |
193 | <file:Documentation/video4linux/API.html>. | |
194 | ||
195 | To compile this driver as a module, choose M here: the | |
196 | module will be called radio-wl1273. | |
197 | ||
198 | # TI's ST based wl128x FM radio | |
199 | source "drivers/media/radio/wl128x/Kconfig" | |
200 | ||
201 | # | |
202 | # ISA drivers configuration | |
203 | # | |
204 | ||
205 | menuconfig V4L_RADIO_ISA_DRIVERS | |
206 | bool "ISA radio devices" | |
207 | depends on ISA | |
208 | default n | |
209 | ---help--- | |
210 | Say Y here to enable support for these ISA drivers. | |
211 | ||
212 | if V4L_RADIO_ISA_DRIVERS | |
213 | ||
137c579c HV |
214 | config RADIO_ISA |
215 | depends on ISA | |
216 | tristate | |
217 | ||
1da177e4 LT |
218 | config RADIO_CADET |
219 | tristate "ADS Cadet AM/FM Tuner" | |
c0c7fa09 | 220 | depends on ISA && VIDEO_V4L2 |
1da177e4 LT |
221 | ---help--- |
222 | Choose Y here if you have one of these AM/FM radio cards, and then | |
223 | fill in the port address below. | |
224 | ||
1da177e4 LT |
225 | To compile this driver as a module, choose M here: the |
226 | module will be called radio-cadet. | |
227 | ||
228 | config RADIO_RTRACK | |
229 | tristate "AIMSlab RadioTrack (aka RadioReveal) support" | |
46ff2c72 | 230 | depends on ISA && VIDEO_V4L2 |
cc3c6df1 | 231 | select RADIO_ISA |
1da177e4 LT |
232 | ---help--- |
233 | Choose Y here if you have one of these FM radio cards, and then fill | |
234 | in the port address below. | |
235 | ||
236 | Note that newer AIMSlab RadioTrack cards have a different chipset | |
237 | and are not supported by this driver. For these cards, use the | |
238 | RadioTrack II driver below. | |
239 | ||
240 | If you have a GemTeks combined (PnP) sound- and radio card you must | |
241 | use this driver as a module and setup the card with isapnptools. | |
242 | You must also pass the module a suitable io parameter, 0x248 has | |
243 | been reported to be used by these cards. | |
244 | ||
cc3c6df1 | 245 | More information is contained in the file |
1da177e4 LT |
246 | <file:Documentation/video4linux/radiotrack.txt>. |
247 | ||
248 | To compile this driver as a module, choose M here: the | |
249 | module will be called radio-aimslab. | |
250 | ||
251 | config RADIO_RTRACK_PORT | |
252 | hex "RadioTrack i/o port (0x20f or 0x30f)" | |
253 | depends on RADIO_RTRACK=y | |
cc3c6df1 | 254 | default "30f" |
1da177e4 LT |
255 | help |
256 | Enter either 0x30f or 0x20f here. The card default is 0x30f, if you | |
257 | haven't changed the jumper setting on the card. | |
258 | ||
259 | config RADIO_RTRACK2 | |
260 | tristate "AIMSlab RadioTrack II support" | |
f8c559f8 | 261 | depends on ISA && VIDEO_V4L2 |
8bd7ef5a | 262 | select RADIO_ISA |
1da177e4 LT |
263 | ---help--- |
264 | Choose Y here if you have this FM radio card, and then fill in the | |
265 | port address below. | |
266 | ||
8bd7ef5a HV |
267 | Note: this driver hasn't been tested since a long time due to lack |
268 | of hardware. If you have this hardware, then please contact the | |
269 | linux-media mailinglist. | |
1da177e4 LT |
270 | |
271 | To compile this driver as a module, choose M here: the | |
272 | module will be called radio-rtrack2. | |
273 | ||
274 | config RADIO_RTRACK2_PORT | |
275 | hex "RadioTrack II i/o port (0x20c or 0x30c)" | |
276 | depends on RADIO_RTRACK2=y | |
277 | default "30c" | |
278 | help | |
279 | Enter either 0x30c or 0x20c here. The card default is 0x30c, if you | |
280 | haven't changed the jumper setting on the card. | |
281 | ||
282 | config RADIO_AZTECH | |
283 | tristate "Aztech/Packard Bell Radio" | |
a4366af4 | 284 | depends on ISA && VIDEO_V4L2 |
3088fba8 | 285 | select RADIO_ISA |
1da177e4 LT |
286 | ---help--- |
287 | Choose Y here if you have one of these FM radio cards, and then fill | |
288 | in the port address below. | |
289 | ||
1da177e4 LT |
290 | To compile this driver as a module, choose M here: the |
291 | module will be called radio-aztech. | |
292 | ||
293 | config RADIO_AZTECH_PORT | |
294 | hex "Aztech/Packard Bell I/O port (0x350 or 0x358)" | |
295 | depends on RADIO_AZTECH=y | |
296 | default "350" | |
297 | help | |
298 | Enter either 0x350 or 0x358 here. The card default is 0x350, if you | |
299 | haven't changed the setting of jumper JP3 on the card. Removing the | |
300 | jumper sets the card to 0x358. | |
301 | ||
302 | config RADIO_GEMTEK | |
3e7589c5 | 303 | tristate "GemTek Radio card (or compatible) support" |
d1c4ecde | 304 | depends on ISA && VIDEO_V4L2 |
f8c08524 | 305 | select RADIO_ISA |
1da177e4 LT |
306 | ---help--- |
307 | Choose Y here if you have this FM radio card, and then fill in the | |
3e7589c5 PS |
308 | I/O port address and settings below. The following cards either have |
309 | GemTek Radio tuner or are rebranded GemTek Radio cards: | |
310 | ||
311 | - Sound Vision 16 Gold with FM Radio | |
312 | - Typhoon Radio card (some models) | |
313 | - Hama Radio card | |
1da177e4 | 314 | |
1da177e4 LT |
315 | To compile this driver as a module, choose M here: the |
316 | module will be called radio-gemtek. | |
317 | ||
318 | config RADIO_GEMTEK_PORT | |
f8c08524 | 319 | hex "Fixed I/O port (0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c)" |
1da177e4 LT |
320 | depends on RADIO_GEMTEK=y |
321 | default "34c" | |
322 | help | |
f8c08524 HV |
323 | Enter either 0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c here. The |
324 | card default is 0x34c, if you haven't changed the jumper setting | |
325 | on the card. | |
326 | ||
327 | On Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O | |
3e7589c5 | 328 | port is 0x20c, 0x248 or 0x28c. |
f8c08524 | 329 | |
3e7589c5 PS |
330 | If automatic I/O port probing is enabled this port will be used only |
331 | in case of automatic probing failure, ie. as a fallback. | |
332 | ||
333 | config RADIO_GEMTEK_PROBE | |
334 | bool "Automatic I/O port probing" | |
335 | depends on RADIO_GEMTEK=y | |
336 | default y | |
337 | help | |
338 | Say Y here to enable automatic probing for GemTek Radio card. The | |
339 | following ports will be probed: 0x20c, 0x30c, 0x24c, 0x34c, 0x248 and | |
340 | 0x28c. | |
1da177e4 | 341 | |
8366fc39 KH |
342 | config RADIO_MIROPCM20 |
343 | tristate "miroSOUND PCM20 radio" | |
4756fc64 | 344 | depends on ISA && ISA_DMA_API && VIDEO_V4L2 && SND |
dd7cdb88 | 345 | select SND_ISA |
8366fc39 KH |
346 | select SND_MIRO |
347 | ---help--- | |
348 | Choose Y here if you have this FM radio card. You also need to enable | |
349 | the ALSA sound system. This choice automatically selects the ALSA | |
350 | sound card driver "Miro miroSOUND PCM1pro/PCM12/PCM20radio" as this | |
351 | is required for the radio-miropcm20. | |
352 | ||
8366fc39 KH |
353 | To compile this driver as a module, choose M here: the |
354 | module will be called radio-miropcm20. | |
1da177e4 | 355 | |
1da177e4 | 356 | config RADIO_SF16FMI |
abed623c | 357 | tristate "SF16-FMI/SF16-FMP/SF16-FMD Radio" |
a2ef73af | 358 | depends on ISA && VIDEO_V4L2 |
1da177e4 | 359 | ---help--- |
67cabf50 | 360 | Choose Y here if you have one of these FM radio cards. |
1da177e4 | 361 | |
1da177e4 LT |
362 | To compile this driver as a module, choose M here: the |
363 | module will be called radio-sf16fmi. | |
364 | ||
365 | config RADIO_SF16FMR2 | |
3491a88e | 366 | tristate "SF16-FMR2/SF16-FMD2 Radio" |
42a741dc | 367 | depends on ISA && VIDEO_V4L2 && SND |
1da177e4 LT |
368 | ---help--- |
369 | Choose Y here if you have one of these FM radio cards. | |
370 | ||
1da177e4 LT |
371 | To compile this driver as a module, choose M here: the |
372 | module will be called radio-sf16fmr2. | |
373 | ||
374 | config RADIO_TERRATEC | |
375 | tristate "TerraTec ActiveRadio ISA Standalone" | |
55ac7b69 | 376 | depends on ISA && VIDEO_V4L2 |
32c51836 | 377 | select RADIO_ISA |
1da177e4 | 378 | ---help--- |
32c51836 | 379 | Choose Y here if you have this FM radio card. |
1da177e4 | 380 | |
32c51836 HV |
381 | Note: this driver hasn't been tested since a long time due to lack |
382 | of hardware. If you have this hardware, then please contact the | |
383 | linux-media mailinglist. | |
1da177e4 LT |
384 | |
385 | To compile this driver as a module, choose M here: the | |
386 | module will be called radio-terratec. | |
387 | ||
1da177e4 LT |
388 | config RADIO_TRUST |
389 | tristate "Trust FM radio card" | |
982eddb9 | 390 | depends on ISA && VIDEO_V4L2 |
1d211f26 | 391 | select RADIO_ISA |
1da177e4 LT |
392 | help |
393 | This is a driver for the Trust FM radio cards. Say Y if you have | |
394 | such a card and want to use it under Linux. | |
395 | ||
1d211f26 HV |
396 | Note: this driver hasn't been tested since a long time due to lack |
397 | of hardware. If you have this hardware, then please contact the | |
398 | linux-media mailinglist. | |
399 | ||
1da177e4 LT |
400 | To compile this driver as a module, choose M here: the |
401 | module will be called radio-trust. | |
402 | ||
403 | config RADIO_TRUST_PORT | |
404 | hex "Trust i/o port (usually 0x350 or 0x358)" | |
405 | depends on RADIO_TRUST=y | |
406 | default "350" | |
407 | help | |
408 | Enter the I/O port of your Trust FM radio card. If unsure, try the | |
409 | values "0x350" or "0x358". | |
410 | ||
411 | config RADIO_TYPHOON | |
412 | tristate "Typhoon Radio (a.k.a. EcoRadio)" | |
30c48305 | 413 | depends on ISA && VIDEO_V4L2 |
da1ff351 | 414 | select RADIO_ISA |
1da177e4 LT |
415 | ---help--- |
416 | Choose Y here if you have one of these FM radio cards, and then fill | |
417 | in the port address and the frequency used for muting below. | |
418 | ||
da1ff351 HV |
419 | Note: this driver hasn't been tested since a long time due to lack |
420 | of hardware. If you have this hardware, then please contact the | |
421 | linux-media mailinglist. | |
1da177e4 LT |
422 | |
423 | To compile this driver as a module, choose M here: the | |
424 | module will be called radio-typhoon. | |
425 | ||
1da177e4 LT |
426 | config RADIO_TYPHOON_PORT |
427 | hex "Typhoon I/O port (0x316 or 0x336)" | |
428 | depends on RADIO_TYPHOON=y | |
429 | default "316" | |
430 | help | |
431 | Enter the I/O port of your Typhoon or EcoRadio radio card. | |
432 | ||
433 | config RADIO_TYPHOON_MUTEFREQ | |
434 | int "Typhoon frequency set when muting the device (kHz)" | |
435 | depends on RADIO_TYPHOON=y | |
436 | default "87500" | |
437 | help | |
438 | Enter the frequency used for muting the radio. The device is never | |
439 | completely silent. If the volume is just turned down, you can still | |
440 | hear silent voices and music. For that reason, the frequency of the | |
441 | radio device is set to the frequency you can enter here whenever | |
442 | the device is muted. There should be no local radio station at that | |
443 | frequency. | |
444 | ||
445 | config RADIO_ZOLTRIX | |
446 | tristate "Zoltrix Radio" | |
2ab65299 | 447 | depends on ISA && VIDEO_V4L2 |
6b39246c | 448 | select RADIO_ISA |
1da177e4 LT |
449 | ---help--- |
450 | Choose Y here if you have one of these FM radio cards, and then fill | |
451 | in the port address below. | |
452 | ||
6b39246c HV |
453 | Note: this driver hasn't been tested since a long time due to lack |
454 | of hardware. If you have this hardware, then please contact the | |
455 | linux-media mailinglist. | |
1da177e4 LT |
456 | |
457 | To compile this driver as a module, choose M here: the | |
458 | module will be called radio-zoltrix. | |
459 | ||
460 | config RADIO_ZOLTRIX_PORT | |
461 | hex "ZOLTRIX I/O port (0x20c or 0x30c)" | |
462 | depends on RADIO_ZOLTRIX=y | |
463 | default "20c" | |
464 | help | |
465 | Enter the I/O port of your Zoltrix radio card. | |
466 | ||
e21d9865 | 467 | endif # V4L_RADIO_ISA_DRIVERS |
57f05bfa | 468 | |
c5da5afb | 469 | endif # RADIO_ADAPTERS |