Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | # |
2 | # Multimedia Video device configuration | |
3 | # | |
4 | ||
c5da5afb JE |
5 | menuconfig RADIO_ADAPTERS |
6 | bool "Radio Adapters" | |
057596ee | 7 | depends on VIDEO_V4L2 |
724f4a32 | 8 | depends on MEDIA_RADIO_SUPPORT |
c5da5afb | 9 | default y |
ff01652c MCC |
10 | ---help--- |
11 | Say Y here to enable selecting AM/FM radio adapters. | |
c5da5afb | 12 | |
057596ee | 13 | if RADIO_ADAPTERS && VIDEO_V4L2 |
1da177e4 | 14 | |
e21d9865 HV |
15 | config RADIO_SI470X |
16 | bool "Silicon Labs Si470x FM Radio Receiver support" | |
17 | depends on VIDEO_V4L2 | |
18 | ||
19 | source "drivers/media/radio/si470x/Kconfig" | |
20 | ||
21 | config USB_MR800 | |
22 | tristate "AverMedia MR 800 USB FM radio support" | |
23 | depends on USB && VIDEO_V4L2 | |
24 | ---help--- | |
25 | Say Y here if you want to connect this type of radio to your | |
26 | computer's USB port. Note that the audio is not digital, and | |
27 | you must connect the line out connector to a sound card or a | |
28 | set of speakers. | |
29 | ||
30 | To compile this driver as a module, choose M here: the | |
31 | module will be called radio-mr800. | |
32 | ||
33 | config USB_DSBR | |
34 | tristate "D-Link/GemTek USB FM radio support" | |
35 | depends on USB && VIDEO_V4L2 | |
36 | ---help--- | |
37 | Say Y here if you want to connect this type of radio to your | |
38 | computer's USB port. Note that the audio is not digital, and | |
39 | you must connect the line out connector to a sound card or a | |
40 | set of speakers. | |
41 | ||
42 | To compile this driver as a module, choose M here: the | |
43 | module will be called dsbr100. | |
44 | ||
45 | config RADIO_MAXIRADIO | |
46 | tristate "Guillemot MAXI Radio FM 2000 radio" | |
cfb19b0a | 47 | depends on VIDEO_V4L2 && PCI && SND |
e21d9865 HV |
48 | ---help--- |
49 | Choose Y here if you have this radio card. This card may also be | |
50 | found as Gemtek PCI FM. | |
51 | ||
52 | In order to control your radio card, you will need to use programs | |
53 | that are compatible with the Video For Linux API. Information on | |
54 | this API and pointers to "v4l" programs may be found at | |
55 | <file:Documentation/video4linux/API.html>. | |
56 | ||
57 | To compile this driver as a module, choose M here: the | |
58 | module will be called radio-maxiradio. | |
59 | ||
8e2ce73e HG |
60 | config RADIO_SHARK |
61 | tristate "Griffin radioSHARK USB radio receiver" | |
62 | depends on USB && SND | |
63 | ---help--- | |
64 | Choose Y here if you have this radio receiver. | |
65 | ||
66 | There are 2 versions of this device, this driver is for version 1, | |
67 | which is white. | |
68 | ||
69 | In order to control your radio card, you will need to use programs | |
70 | that are compatible with the Video For Linux API. Information on | |
71 | this API and pointers to "v4l" programs may be found at | |
72 | <file:Documentation/video4linux/API.html>. | |
73 | ||
74 | To compile this driver as a module, choose M here: the | |
75 | module will be called radio-shark. | |
e21d9865 HV |
76 | |
77 | config I2C_SI4713 | |
78 | tristate "I2C driver for Silicon Labs Si4713 device" | |
79 | depends on I2C && VIDEO_V4L2 | |
80 | ---help--- | |
81 | Say Y here if you want support to Si4713 I2C device. | |
82 | This device driver supports only i2c bus. | |
83 | ||
84 | To compile this driver as a module, choose M here: the | |
85 | module will be called si4713. | |
86 | ||
87 | config RADIO_SI4713 | |
88 | tristate "Silicon Labs Si4713 FM Radio Transmitter support" | |
89 | depends on I2C && VIDEO_V4L2 | |
90 | select I2C_SI4713 | |
91 | ---help--- | |
92 | Say Y here if you want support to Si4713 FM Radio Transmitter. | |
93 | This device can transmit audio through FM. It can transmit | |
94 | RDS and RBDS signals as well. This module is the v4l2 radio | |
95 | interface for the i2c driver of this device. | |
96 | ||
97 | To compile this driver as a module, choose M here: the | |
98 | module will be called radio-si4713. | |
99 | ||
1bf20c3a HV |
100 | config USB_KEENE |
101 | tristate "Keene FM Transmitter USB support" | |
102 | depends on USB && VIDEO_V4L2 | |
103 | ---help--- | |
104 | Say Y here if you want to connect this type of FM transmitter | |
105 | to your computer's USB port. | |
106 | ||
107 | To compile this driver as a module, choose M here: the | |
108 | module will be called radio-keene. | |
109 | ||
e21d9865 HV |
110 | config RADIO_TEA5764 |
111 | tristate "TEA5764 I2C FM radio support" | |
112 | depends on I2C && VIDEO_V4L2 | |
113 | ---help--- | |
114 | Say Y here if you want to use the TEA5764 FM chip found in | |
115 | EZX phones. This FM chip is present in EZX phones from Motorola, | |
116 | connected to internal pxa I2C bus. | |
117 | ||
118 | To compile this driver as a module, choose M here: the | |
119 | module will be called radio-tea5764. | |
120 | ||
121 | config RADIO_TEA5764_XTAL | |
122 | bool "TEA5764 crystal reference" | |
123 | depends on RADIO_TEA5764=y | |
124 | default y | |
125 | help | |
126 | Say Y here if TEA5764 have a 32768 Hz crystal in circuit, say N | |
127 | here if TEA5764 reference frequency is connected in FREQIN. | |
128 | ||
129 | config RADIO_SAA7706H | |
130 | tristate "SAA7706H Car Radio DSP" | |
131 | depends on I2C && VIDEO_V4L2 | |
132 | ---help--- | |
133 | Say Y here if you want to use the SAA7706H Car radio Digital | |
134 | Signal Processor, found for instance on the Russellville development | |
135 | board. On the russellville the device is connected to internal | |
136 | timberdale I2C bus. | |
137 | ||
138 | To compile this driver as a module, choose M here: the | |
139 | module will be called SAA7706H. | |
140 | ||
141 | config RADIO_TEF6862 | |
142 | tristate "TEF6862 Car Radio Enhanced Selectivity Tuner" | |
143 | depends on I2C && VIDEO_V4L2 | |
144 | ---help--- | |
145 | Say Y here if you want to use the TEF6862 Car Radio Enhanced | |
146 | Selectivity Tuner, found for instance on the Russellville development | |
147 | board. On the russellville the device is connected to internal | |
148 | timberdale I2C bus. | |
149 | ||
150 | To compile this driver as a module, choose M here: the | |
151 | module will be called TEF6862. | |
152 | ||
153 | config RADIO_TIMBERDALE | |
154 | tristate "Enable the Timberdale radio driver" | |
155 | depends on MFD_TIMBERDALE && VIDEO_V4L2 | |
156 | depends on I2C # for RADIO_SAA7706H | |
157 | select RADIO_TEF6862 | |
158 | select RADIO_SAA7706H | |
159 | ---help--- | |
160 | This is a kind of umbrella driver for the Radio Tuner and DSP | |
161 | found behind the Timberdale FPGA on the Russellville board. | |
162 | Enabling this driver will automatically select the DSP and tuner. | |
163 | ||
164 | config RADIO_WL1273 | |
165 | tristate "Texas Instruments WL1273 I2C FM Radio" | |
166 | depends on I2C && VIDEO_V4L2 | |
167 | select MFD_CORE | |
168 | select MFD_WL1273_CORE | |
169 | select FW_LOADER | |
170 | ---help--- | |
171 | Choose Y here if you have this FM radio chip. | |
172 | ||
173 | In order to control your radio card, you will need to use programs | |
174 | that are compatible with the Video For Linux 2 API. Information on | |
175 | this API and pointers to "v4l2" programs may be found at | |
176 | <file:Documentation/video4linux/API.html>. | |
177 | ||
178 | To compile this driver as a module, choose M here: the | |
179 | module will be called radio-wl1273. | |
180 | ||
181 | # TI's ST based wl128x FM radio | |
182 | source "drivers/media/radio/wl128x/Kconfig" | |
183 | ||
184 | # | |
185 | # ISA drivers configuration | |
186 | # | |
187 | ||
188 | menuconfig V4L_RADIO_ISA_DRIVERS | |
189 | bool "ISA radio devices" | |
190 | depends on ISA | |
191 | default n | |
192 | ---help--- | |
193 | Say Y here to enable support for these ISA drivers. | |
194 | ||
195 | if V4L_RADIO_ISA_DRIVERS | |
196 | ||
137c579c HV |
197 | config RADIO_ISA |
198 | depends on ISA | |
199 | tristate | |
200 | ||
1da177e4 LT |
201 | config RADIO_CADET |
202 | tristate "ADS Cadet AM/FM Tuner" | |
c0c7fa09 | 203 | depends on ISA && VIDEO_V4L2 |
1da177e4 LT |
204 | ---help--- |
205 | Choose Y here if you have one of these AM/FM radio cards, and then | |
206 | fill in the port address below. | |
207 | ||
1da177e4 LT |
208 | To compile this driver as a module, choose M here: the |
209 | module will be called radio-cadet. | |
210 | ||
211 | config RADIO_RTRACK | |
212 | tristate "AIMSlab RadioTrack (aka RadioReveal) support" | |
46ff2c72 | 213 | depends on ISA && VIDEO_V4L2 |
cc3c6df1 | 214 | select RADIO_ISA |
1da177e4 LT |
215 | ---help--- |
216 | Choose Y here if you have one of these FM radio cards, and then fill | |
217 | in the port address below. | |
218 | ||
219 | Note that newer AIMSlab RadioTrack cards have a different chipset | |
220 | and are not supported by this driver. For these cards, use the | |
221 | RadioTrack II driver below. | |
222 | ||
223 | If you have a GemTeks combined (PnP) sound- and radio card you must | |
224 | use this driver as a module and setup the card with isapnptools. | |
225 | You must also pass the module a suitable io parameter, 0x248 has | |
226 | been reported to be used by these cards. | |
227 | ||
cc3c6df1 | 228 | More information is contained in the file |
1da177e4 LT |
229 | <file:Documentation/video4linux/radiotrack.txt>. |
230 | ||
231 | To compile this driver as a module, choose M here: the | |
232 | module will be called radio-aimslab. | |
233 | ||
234 | config RADIO_RTRACK_PORT | |
235 | hex "RadioTrack i/o port (0x20f or 0x30f)" | |
236 | depends on RADIO_RTRACK=y | |
cc3c6df1 | 237 | default "30f" |
1da177e4 LT |
238 | help |
239 | Enter either 0x30f or 0x20f here. The card default is 0x30f, if you | |
240 | haven't changed the jumper setting on the card. | |
241 | ||
242 | config RADIO_RTRACK2 | |
243 | tristate "AIMSlab RadioTrack II support" | |
f8c559f8 | 244 | depends on ISA && VIDEO_V4L2 |
8bd7ef5a | 245 | select RADIO_ISA |
1da177e4 LT |
246 | ---help--- |
247 | Choose Y here if you have this FM radio card, and then fill in the | |
248 | port address below. | |
249 | ||
8bd7ef5a HV |
250 | Note: this driver hasn't been tested since a long time due to lack |
251 | of hardware. If you have this hardware, then please contact the | |
252 | linux-media mailinglist. | |
1da177e4 LT |
253 | |
254 | To compile this driver as a module, choose M here: the | |
255 | module will be called radio-rtrack2. | |
256 | ||
257 | config RADIO_RTRACK2_PORT | |
258 | hex "RadioTrack II i/o port (0x20c or 0x30c)" | |
259 | depends on RADIO_RTRACK2=y | |
260 | default "30c" | |
261 | help | |
262 | Enter either 0x30c or 0x20c here. The card default is 0x30c, if you | |
263 | haven't changed the jumper setting on the card. | |
264 | ||
265 | config RADIO_AZTECH | |
266 | tristate "Aztech/Packard Bell Radio" | |
a4366af4 | 267 | depends on ISA && VIDEO_V4L2 |
3088fba8 | 268 | select RADIO_ISA |
1da177e4 LT |
269 | ---help--- |
270 | Choose Y here if you have one of these FM radio cards, and then fill | |
271 | in the port address below. | |
272 | ||
1da177e4 LT |
273 | To compile this driver as a module, choose M here: the |
274 | module will be called radio-aztech. | |
275 | ||
276 | config RADIO_AZTECH_PORT | |
277 | hex "Aztech/Packard Bell I/O port (0x350 or 0x358)" | |
278 | depends on RADIO_AZTECH=y | |
279 | default "350" | |
280 | help | |
281 | Enter either 0x350 or 0x358 here. The card default is 0x350, if you | |
282 | haven't changed the setting of jumper JP3 on the card. Removing the | |
283 | jumper sets the card to 0x358. | |
284 | ||
285 | config RADIO_GEMTEK | |
3e7589c5 | 286 | tristate "GemTek Radio card (or compatible) support" |
d1c4ecde | 287 | depends on ISA && VIDEO_V4L2 |
f8c08524 | 288 | select RADIO_ISA |
1da177e4 LT |
289 | ---help--- |
290 | Choose Y here if you have this FM radio card, and then fill in the | |
3e7589c5 PS |
291 | I/O port address and settings below. The following cards either have |
292 | GemTek Radio tuner or are rebranded GemTek Radio cards: | |
293 | ||
294 | - Sound Vision 16 Gold with FM Radio | |
295 | - Typhoon Radio card (some models) | |
296 | - Hama Radio card | |
1da177e4 | 297 | |
1da177e4 LT |
298 | To compile this driver as a module, choose M here: the |
299 | module will be called radio-gemtek. | |
300 | ||
301 | config RADIO_GEMTEK_PORT | |
f8c08524 | 302 | hex "Fixed I/O port (0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c)" |
1da177e4 LT |
303 | depends on RADIO_GEMTEK=y |
304 | default "34c" | |
305 | help | |
f8c08524 HV |
306 | Enter either 0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c here. The |
307 | card default is 0x34c, if you haven't changed the jumper setting | |
308 | on the card. | |
309 | ||
310 | On Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O | |
3e7589c5 | 311 | port is 0x20c, 0x248 or 0x28c. |
f8c08524 | 312 | |
3e7589c5 PS |
313 | If automatic I/O port probing is enabled this port will be used only |
314 | in case of automatic probing failure, ie. as a fallback. | |
315 | ||
316 | config RADIO_GEMTEK_PROBE | |
317 | bool "Automatic I/O port probing" | |
318 | depends on RADIO_GEMTEK=y | |
319 | default y | |
320 | help | |
321 | Say Y here to enable automatic probing for GemTek Radio card. The | |
322 | following ports will be probed: 0x20c, 0x30c, 0x24c, 0x34c, 0x248 and | |
323 | 0x28c. | |
1da177e4 | 324 | |
8366fc39 KH |
325 | config RADIO_MIROPCM20 |
326 | tristate "miroSOUND PCM20 radio" | |
4756fc64 | 327 | depends on ISA && ISA_DMA_API && VIDEO_V4L2 && SND |
dd7cdb88 | 328 | select SND_ISA |
8366fc39 KH |
329 | select SND_MIRO |
330 | ---help--- | |
331 | Choose Y here if you have this FM radio card. You also need to enable | |
332 | the ALSA sound system. This choice automatically selects the ALSA | |
333 | sound card driver "Miro miroSOUND PCM1pro/PCM12/PCM20radio" as this | |
334 | is required for the radio-miropcm20. | |
335 | ||
8366fc39 KH |
336 | To compile this driver as a module, choose M here: the |
337 | module will be called radio-miropcm20. | |
1da177e4 | 338 | |
1da177e4 | 339 | config RADIO_SF16FMI |
abed623c | 340 | tristate "SF16-FMI/SF16-FMP/SF16-FMD Radio" |
a2ef73af | 341 | depends on ISA && VIDEO_V4L2 |
1da177e4 | 342 | ---help--- |
67cabf50 | 343 | Choose Y here if you have one of these FM radio cards. |
1da177e4 | 344 | |
1da177e4 LT |
345 | To compile this driver as a module, choose M here: the |
346 | module will be called radio-sf16fmi. | |
347 | ||
348 | config RADIO_SF16FMR2 | |
3491a88e | 349 | tristate "SF16-FMR2/SF16-FMD2 Radio" |
42a741dc | 350 | depends on ISA && VIDEO_V4L2 && SND |
1da177e4 LT |
351 | ---help--- |
352 | Choose Y here if you have one of these FM radio cards. | |
353 | ||
1da177e4 LT |
354 | To compile this driver as a module, choose M here: the |
355 | module will be called radio-sf16fmr2. | |
356 | ||
357 | config RADIO_TERRATEC | |
358 | tristate "TerraTec ActiveRadio ISA Standalone" | |
55ac7b69 | 359 | depends on ISA && VIDEO_V4L2 |
32c51836 | 360 | select RADIO_ISA |
1da177e4 | 361 | ---help--- |
32c51836 | 362 | Choose Y here if you have this FM radio card. |
1da177e4 | 363 | |
32c51836 HV |
364 | Note: this driver hasn't been tested since a long time due to lack |
365 | of hardware. If you have this hardware, then please contact the | |
366 | linux-media mailinglist. | |
1da177e4 LT |
367 | |
368 | To compile this driver as a module, choose M here: the | |
369 | module will be called radio-terratec. | |
370 | ||
1da177e4 LT |
371 | config RADIO_TRUST |
372 | tristate "Trust FM radio card" | |
982eddb9 | 373 | depends on ISA && VIDEO_V4L2 |
1d211f26 | 374 | select RADIO_ISA |
1da177e4 LT |
375 | help |
376 | This is a driver for the Trust FM radio cards. Say Y if you have | |
377 | such a card and want to use it under Linux. | |
378 | ||
1d211f26 HV |
379 | Note: this driver hasn't been tested since a long time due to lack |
380 | of hardware. If you have this hardware, then please contact the | |
381 | linux-media mailinglist. | |
382 | ||
1da177e4 LT |
383 | To compile this driver as a module, choose M here: the |
384 | module will be called radio-trust. | |
385 | ||
386 | config RADIO_TRUST_PORT | |
387 | hex "Trust i/o port (usually 0x350 or 0x358)" | |
388 | depends on RADIO_TRUST=y | |
389 | default "350" | |
390 | help | |
391 | Enter the I/O port of your Trust FM radio card. If unsure, try the | |
392 | values "0x350" or "0x358". | |
393 | ||
394 | config RADIO_TYPHOON | |
395 | tristate "Typhoon Radio (a.k.a. EcoRadio)" | |
30c48305 | 396 | depends on ISA && VIDEO_V4L2 |
da1ff351 | 397 | select RADIO_ISA |
1da177e4 LT |
398 | ---help--- |
399 | Choose Y here if you have one of these FM radio cards, and then fill | |
400 | in the port address and the frequency used for muting below. | |
401 | ||
da1ff351 HV |
402 | Note: this driver hasn't been tested since a long time due to lack |
403 | of hardware. If you have this hardware, then please contact the | |
404 | linux-media mailinglist. | |
1da177e4 LT |
405 | |
406 | To compile this driver as a module, choose M here: the | |
407 | module will be called radio-typhoon. | |
408 | ||
1da177e4 LT |
409 | config RADIO_TYPHOON_PORT |
410 | hex "Typhoon I/O port (0x316 or 0x336)" | |
411 | depends on RADIO_TYPHOON=y | |
412 | default "316" | |
413 | help | |
414 | Enter the I/O port of your Typhoon or EcoRadio radio card. | |
415 | ||
416 | config RADIO_TYPHOON_MUTEFREQ | |
417 | int "Typhoon frequency set when muting the device (kHz)" | |
418 | depends on RADIO_TYPHOON=y | |
419 | default "87500" | |
420 | help | |
421 | Enter the frequency used for muting the radio. The device is never | |
422 | completely silent. If the volume is just turned down, you can still | |
423 | hear silent voices and music. For that reason, the frequency of the | |
424 | radio device is set to the frequency you can enter here whenever | |
425 | the device is muted. There should be no local radio station at that | |
426 | frequency. | |
427 | ||
428 | config RADIO_ZOLTRIX | |
429 | tristate "Zoltrix Radio" | |
2ab65299 | 430 | depends on ISA && VIDEO_V4L2 |
6b39246c | 431 | select RADIO_ISA |
1da177e4 LT |
432 | ---help--- |
433 | Choose Y here if you have one of these FM radio cards, and then fill | |
434 | in the port address below. | |
435 | ||
6b39246c HV |
436 | Note: this driver hasn't been tested since a long time due to lack |
437 | of hardware. If you have this hardware, then please contact the | |
438 | linux-media mailinglist. | |
1da177e4 LT |
439 | |
440 | To compile this driver as a module, choose M here: the | |
441 | module will be called radio-zoltrix. | |
442 | ||
443 | config RADIO_ZOLTRIX_PORT | |
444 | hex "ZOLTRIX I/O port (0x20c or 0x30c)" | |
445 | depends on RADIO_ZOLTRIX=y | |
446 | default "20c" | |
447 | help | |
448 | Enter the I/O port of your Zoltrix radio card. | |
449 | ||
e21d9865 | 450 | endif # V4L_RADIO_ISA_DRIVERS |
57f05bfa | 451 | |
c5da5afb | 452 | endif # RADIO_ADAPTERS |