Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | # |
2 | # Multimedia Video device configuration | |
3 | # | |
4 | ||
c5da5afb JE |
5 | menuconfig RADIO_ADAPTERS |
6 | bool "Radio Adapters" | |
057596ee | 7 | depends on VIDEO_V4L2 |
c5da5afb | 8 | default y |
ff01652c MCC |
9 | ---help--- |
10 | Say Y here to enable selecting AM/FM radio adapters. | |
c5da5afb | 11 | |
057596ee | 12 | if RADIO_ADAPTERS && VIDEO_V4L2 |
1da177e4 | 13 | |
e21d9865 HV |
14 | config RADIO_SI470X |
15 | bool "Silicon Labs Si470x FM Radio Receiver support" | |
16 | depends on VIDEO_V4L2 | |
17 | ||
18 | source "drivers/media/radio/si470x/Kconfig" | |
19 | ||
20 | config USB_MR800 | |
21 | tristate "AverMedia MR 800 USB FM radio support" | |
22 | depends on USB && VIDEO_V4L2 | |
23 | ---help--- | |
24 | Say Y here if you want to connect this type of radio to your | |
25 | computer's USB port. Note that the audio is not digital, and | |
26 | you must connect the line out connector to a sound card or a | |
27 | set of speakers. | |
28 | ||
29 | To compile this driver as a module, choose M here: the | |
30 | module will be called radio-mr800. | |
31 | ||
32 | config USB_DSBR | |
33 | tristate "D-Link/GemTek USB FM radio support" | |
34 | depends on USB && VIDEO_V4L2 | |
35 | ---help--- | |
36 | Say Y here if you want to connect this type of radio to your | |
37 | computer's USB port. Note that the audio is not digital, and | |
38 | you must connect the line out connector to a sound card or a | |
39 | set of speakers. | |
40 | ||
41 | To compile this driver as a module, choose M here: the | |
42 | module will be called dsbr100. | |
43 | ||
44 | config RADIO_MAXIRADIO | |
45 | tristate "Guillemot MAXI Radio FM 2000 radio" | |
cfb19b0a | 46 | depends on VIDEO_V4L2 && PCI && SND |
e21d9865 HV |
47 | ---help--- |
48 | Choose Y here if you have this radio card. This card may also be | |
49 | found as Gemtek PCI FM. | |
50 | ||
51 | In order to control your radio card, you will need to use programs | |
52 | that are compatible with the Video For Linux API. Information on | |
53 | this API and pointers to "v4l" programs may be found at | |
54 | <file:Documentation/video4linux/API.html>. | |
55 | ||
56 | To compile this driver as a module, choose M here: the | |
57 | module will be called radio-maxiradio. | |
58 | ||
59 | ||
60 | config I2C_SI4713 | |
61 | tristate "I2C driver for Silicon Labs Si4713 device" | |
62 | depends on I2C && VIDEO_V4L2 | |
63 | ---help--- | |
64 | Say Y here if you want support to Si4713 I2C device. | |
65 | This device driver supports only i2c bus. | |
66 | ||
67 | To compile this driver as a module, choose M here: the | |
68 | module will be called si4713. | |
69 | ||
70 | config RADIO_SI4713 | |
71 | tristate "Silicon Labs Si4713 FM Radio Transmitter support" | |
72 | depends on I2C && VIDEO_V4L2 | |
73 | select I2C_SI4713 | |
74 | ---help--- | |
75 | Say Y here if you want support to Si4713 FM Radio Transmitter. | |
76 | This device can transmit audio through FM. It can transmit | |
77 | RDS and RBDS signals as well. This module is the v4l2 radio | |
78 | interface for the i2c driver of this device. | |
79 | ||
80 | To compile this driver as a module, choose M here: the | |
81 | module will be called radio-si4713. | |
82 | ||
1bf20c3a HV |
83 | config USB_KEENE |
84 | tristate "Keene FM Transmitter USB support" | |
85 | depends on USB && VIDEO_V4L2 | |
86 | ---help--- | |
87 | Say Y here if you want to connect this type of FM transmitter | |
88 | to your computer's USB port. | |
89 | ||
90 | To compile this driver as a module, choose M here: the | |
91 | module will be called radio-keene. | |
92 | ||
e21d9865 HV |
93 | config RADIO_TEA5764 |
94 | tristate "TEA5764 I2C FM radio support" | |
95 | depends on I2C && VIDEO_V4L2 | |
96 | ---help--- | |
97 | Say Y here if you want to use the TEA5764 FM chip found in | |
98 | EZX phones. This FM chip is present in EZX phones from Motorola, | |
99 | connected to internal pxa I2C bus. | |
100 | ||
101 | To compile this driver as a module, choose M here: the | |
102 | module will be called radio-tea5764. | |
103 | ||
104 | config RADIO_TEA5764_XTAL | |
105 | bool "TEA5764 crystal reference" | |
106 | depends on RADIO_TEA5764=y | |
107 | default y | |
108 | help | |
109 | Say Y here if TEA5764 have a 32768 Hz crystal in circuit, say N | |
110 | here if TEA5764 reference frequency is connected in FREQIN. | |
111 | ||
112 | config RADIO_SAA7706H | |
113 | tristate "SAA7706H Car Radio DSP" | |
114 | depends on I2C && VIDEO_V4L2 | |
115 | ---help--- | |
116 | Say Y here if you want to use the SAA7706H Car radio Digital | |
117 | Signal Processor, found for instance on the Russellville development | |
118 | board. On the russellville the device is connected to internal | |
119 | timberdale I2C bus. | |
120 | ||
121 | To compile this driver as a module, choose M here: the | |
122 | module will be called SAA7706H. | |
123 | ||
124 | config RADIO_TEF6862 | |
125 | tristate "TEF6862 Car Radio Enhanced Selectivity Tuner" | |
126 | depends on I2C && VIDEO_V4L2 | |
127 | ---help--- | |
128 | Say Y here if you want to use the TEF6862 Car Radio Enhanced | |
129 | Selectivity Tuner, found for instance on the Russellville development | |
130 | board. On the russellville the device is connected to internal | |
131 | timberdale I2C bus. | |
132 | ||
133 | To compile this driver as a module, choose M here: the | |
134 | module will be called TEF6862. | |
135 | ||
136 | config RADIO_TIMBERDALE | |
137 | tristate "Enable the Timberdale radio driver" | |
138 | depends on MFD_TIMBERDALE && VIDEO_V4L2 | |
139 | depends on I2C # for RADIO_SAA7706H | |
140 | select RADIO_TEF6862 | |
141 | select RADIO_SAA7706H | |
142 | ---help--- | |
143 | This is a kind of umbrella driver for the Radio Tuner and DSP | |
144 | found behind the Timberdale FPGA on the Russellville board. | |
145 | Enabling this driver will automatically select the DSP and tuner. | |
146 | ||
147 | config RADIO_WL1273 | |
148 | tristate "Texas Instruments WL1273 I2C FM Radio" | |
149 | depends on I2C && VIDEO_V4L2 | |
150 | select MFD_CORE | |
151 | select MFD_WL1273_CORE | |
152 | select FW_LOADER | |
153 | ---help--- | |
154 | Choose Y here if you have this FM radio chip. | |
155 | ||
156 | In order to control your radio card, you will need to use programs | |
157 | that are compatible with the Video For Linux 2 API. Information on | |
158 | this API and pointers to "v4l2" programs may be found at | |
159 | <file:Documentation/video4linux/API.html>. | |
160 | ||
161 | To compile this driver as a module, choose M here: the | |
162 | module will be called radio-wl1273. | |
163 | ||
164 | # TI's ST based wl128x FM radio | |
165 | source "drivers/media/radio/wl128x/Kconfig" | |
166 | ||
167 | # | |
168 | # ISA drivers configuration | |
169 | # | |
170 | ||
171 | menuconfig V4L_RADIO_ISA_DRIVERS | |
172 | bool "ISA radio devices" | |
173 | depends on ISA | |
174 | default n | |
175 | ---help--- | |
176 | Say Y here to enable support for these ISA drivers. | |
177 | ||
178 | if V4L_RADIO_ISA_DRIVERS | |
179 | ||
137c579c HV |
180 | config RADIO_ISA |
181 | depends on ISA | |
182 | tristate | |
183 | ||
1da177e4 LT |
184 | config RADIO_CADET |
185 | tristate "ADS Cadet AM/FM Tuner" | |
c0c7fa09 | 186 | depends on ISA && VIDEO_V4L2 |
1da177e4 LT |
187 | ---help--- |
188 | Choose Y here if you have one of these AM/FM radio cards, and then | |
189 | fill in the port address below. | |
190 | ||
1da177e4 LT |
191 | To compile this driver as a module, choose M here: the |
192 | module will be called radio-cadet. | |
193 | ||
194 | config RADIO_RTRACK | |
195 | tristate "AIMSlab RadioTrack (aka RadioReveal) support" | |
46ff2c72 | 196 | depends on ISA && VIDEO_V4L2 |
cc3c6df1 | 197 | select RADIO_ISA |
1da177e4 LT |
198 | ---help--- |
199 | Choose Y here if you have one of these FM radio cards, and then fill | |
200 | in the port address below. | |
201 | ||
202 | Note that newer AIMSlab RadioTrack cards have a different chipset | |
203 | and are not supported by this driver. For these cards, use the | |
204 | RadioTrack II driver below. | |
205 | ||
206 | If you have a GemTeks combined (PnP) sound- and radio card you must | |
207 | use this driver as a module and setup the card with isapnptools. | |
208 | You must also pass the module a suitable io parameter, 0x248 has | |
209 | been reported to be used by these cards. | |
210 | ||
cc3c6df1 | 211 | More information is contained in the file |
1da177e4 LT |
212 | <file:Documentation/video4linux/radiotrack.txt>. |
213 | ||
214 | To compile this driver as a module, choose M here: the | |
215 | module will be called radio-aimslab. | |
216 | ||
217 | config RADIO_RTRACK_PORT | |
218 | hex "RadioTrack i/o port (0x20f or 0x30f)" | |
219 | depends on RADIO_RTRACK=y | |
cc3c6df1 | 220 | default "30f" |
1da177e4 LT |
221 | help |
222 | Enter either 0x30f or 0x20f here. The card default is 0x30f, if you | |
223 | haven't changed the jumper setting on the card. | |
224 | ||
225 | config RADIO_RTRACK2 | |
226 | tristate "AIMSlab RadioTrack II support" | |
f8c559f8 | 227 | depends on ISA && VIDEO_V4L2 |
8bd7ef5a | 228 | select RADIO_ISA |
1da177e4 LT |
229 | ---help--- |
230 | Choose Y here if you have this FM radio card, and then fill in the | |
231 | port address below. | |
232 | ||
8bd7ef5a HV |
233 | Note: this driver hasn't been tested since a long time due to lack |
234 | of hardware. If you have this hardware, then please contact the | |
235 | linux-media mailinglist. | |
1da177e4 LT |
236 | |
237 | To compile this driver as a module, choose M here: the | |
238 | module will be called radio-rtrack2. | |
239 | ||
240 | config RADIO_RTRACK2_PORT | |
241 | hex "RadioTrack II i/o port (0x20c or 0x30c)" | |
242 | depends on RADIO_RTRACK2=y | |
243 | default "30c" | |
244 | help | |
245 | Enter either 0x30c or 0x20c here. The card default is 0x30c, if you | |
246 | haven't changed the jumper setting on the card. | |
247 | ||
248 | config RADIO_AZTECH | |
249 | tristate "Aztech/Packard Bell Radio" | |
a4366af4 | 250 | depends on ISA && VIDEO_V4L2 |
3088fba8 | 251 | select RADIO_ISA |
1da177e4 LT |
252 | ---help--- |
253 | Choose Y here if you have one of these FM radio cards, and then fill | |
254 | in the port address below. | |
255 | ||
1da177e4 LT |
256 | To compile this driver as a module, choose M here: the |
257 | module will be called radio-aztech. | |
258 | ||
259 | config RADIO_AZTECH_PORT | |
260 | hex "Aztech/Packard Bell I/O port (0x350 or 0x358)" | |
261 | depends on RADIO_AZTECH=y | |
262 | default "350" | |
263 | help | |
264 | Enter either 0x350 or 0x358 here. The card default is 0x350, if you | |
265 | haven't changed the setting of jumper JP3 on the card. Removing the | |
266 | jumper sets the card to 0x358. | |
267 | ||
268 | config RADIO_GEMTEK | |
3e7589c5 | 269 | tristate "GemTek Radio card (or compatible) support" |
d1c4ecde | 270 | depends on ISA && VIDEO_V4L2 |
f8c08524 | 271 | select RADIO_ISA |
1da177e4 LT |
272 | ---help--- |
273 | Choose Y here if you have this FM radio card, and then fill in the | |
3e7589c5 PS |
274 | I/O port address and settings below. The following cards either have |
275 | GemTek Radio tuner or are rebranded GemTek Radio cards: | |
276 | ||
277 | - Sound Vision 16 Gold with FM Radio | |
278 | - Typhoon Radio card (some models) | |
279 | - Hama Radio card | |
1da177e4 | 280 | |
1da177e4 LT |
281 | To compile this driver as a module, choose M here: the |
282 | module will be called radio-gemtek. | |
283 | ||
284 | config RADIO_GEMTEK_PORT | |
f8c08524 | 285 | hex "Fixed I/O port (0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c)" |
1da177e4 LT |
286 | depends on RADIO_GEMTEK=y |
287 | default "34c" | |
288 | help | |
f8c08524 HV |
289 | Enter either 0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c here. The |
290 | card default is 0x34c, if you haven't changed the jumper setting | |
291 | on the card. | |
292 | ||
293 | On Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O | |
3e7589c5 | 294 | port is 0x20c, 0x248 or 0x28c. |
f8c08524 | 295 | |
3e7589c5 PS |
296 | If automatic I/O port probing is enabled this port will be used only |
297 | in case of automatic probing failure, ie. as a fallback. | |
298 | ||
299 | config RADIO_GEMTEK_PROBE | |
300 | bool "Automatic I/O port probing" | |
301 | depends on RADIO_GEMTEK=y | |
302 | default y | |
303 | help | |
304 | Say Y here to enable automatic probing for GemTek Radio card. The | |
305 | following ports will be probed: 0x20c, 0x30c, 0x24c, 0x34c, 0x248 and | |
306 | 0x28c. | |
1da177e4 | 307 | |
8366fc39 KH |
308 | config RADIO_MIROPCM20 |
309 | tristate "miroSOUND PCM20 radio" | |
4756fc64 | 310 | depends on ISA && ISA_DMA_API && VIDEO_V4L2 && SND |
dd7cdb88 | 311 | select SND_ISA |
8366fc39 KH |
312 | select SND_MIRO |
313 | ---help--- | |
314 | Choose Y here if you have this FM radio card. You also need to enable | |
315 | the ALSA sound system. This choice automatically selects the ALSA | |
316 | sound card driver "Miro miroSOUND PCM1pro/PCM12/PCM20radio" as this | |
317 | is required for the radio-miropcm20. | |
318 | ||
8366fc39 KH |
319 | To compile this driver as a module, choose M here: the |
320 | module will be called radio-miropcm20. | |
1da177e4 | 321 | |
1da177e4 | 322 | config RADIO_SF16FMI |
abed623c | 323 | tristate "SF16-FMI/SF16-FMP/SF16-FMD Radio" |
a2ef73af | 324 | depends on ISA && VIDEO_V4L2 |
1da177e4 | 325 | ---help--- |
67cabf50 | 326 | Choose Y here if you have one of these FM radio cards. |
1da177e4 | 327 | |
1da177e4 LT |
328 | To compile this driver as a module, choose M here: the |
329 | module will be called radio-sf16fmi. | |
330 | ||
331 | config RADIO_SF16FMR2 | |
3491a88e | 332 | tristate "SF16-FMR2/SF16-FMD2 Radio" |
42a741dc | 333 | depends on ISA && VIDEO_V4L2 && SND |
1da177e4 LT |
334 | ---help--- |
335 | Choose Y here if you have one of these FM radio cards. | |
336 | ||
1da177e4 LT |
337 | To compile this driver as a module, choose M here: the |
338 | module will be called radio-sf16fmr2. | |
339 | ||
340 | config RADIO_TERRATEC | |
341 | tristate "TerraTec ActiveRadio ISA Standalone" | |
55ac7b69 | 342 | depends on ISA && VIDEO_V4L2 |
32c51836 | 343 | select RADIO_ISA |
1da177e4 | 344 | ---help--- |
32c51836 | 345 | Choose Y here if you have this FM radio card. |
1da177e4 | 346 | |
32c51836 HV |
347 | Note: this driver hasn't been tested since a long time due to lack |
348 | of hardware. If you have this hardware, then please contact the | |
349 | linux-media mailinglist. | |
1da177e4 LT |
350 | |
351 | To compile this driver as a module, choose M here: the | |
352 | module will be called radio-terratec. | |
353 | ||
1da177e4 LT |
354 | config RADIO_TRUST |
355 | tristate "Trust FM radio card" | |
982eddb9 | 356 | depends on ISA && VIDEO_V4L2 |
1d211f26 | 357 | select RADIO_ISA |
1da177e4 LT |
358 | help |
359 | This is a driver for the Trust FM radio cards. Say Y if you have | |
360 | such a card and want to use it under Linux. | |
361 | ||
1d211f26 HV |
362 | Note: this driver hasn't been tested since a long time due to lack |
363 | of hardware. If you have this hardware, then please contact the | |
364 | linux-media mailinglist. | |
365 | ||
1da177e4 LT |
366 | To compile this driver as a module, choose M here: the |
367 | module will be called radio-trust. | |
368 | ||
369 | config RADIO_TRUST_PORT | |
370 | hex "Trust i/o port (usually 0x350 or 0x358)" | |
371 | depends on RADIO_TRUST=y | |
372 | default "350" | |
373 | help | |
374 | Enter the I/O port of your Trust FM radio card. If unsure, try the | |
375 | values "0x350" or "0x358". | |
376 | ||
377 | config RADIO_TYPHOON | |
378 | tristate "Typhoon Radio (a.k.a. EcoRadio)" | |
30c48305 | 379 | depends on ISA && VIDEO_V4L2 |
da1ff351 | 380 | select RADIO_ISA |
1da177e4 LT |
381 | ---help--- |
382 | Choose Y here if you have one of these FM radio cards, and then fill | |
383 | in the port address and the frequency used for muting below. | |
384 | ||
da1ff351 HV |
385 | Note: this driver hasn't been tested since a long time due to lack |
386 | of hardware. If you have this hardware, then please contact the | |
387 | linux-media mailinglist. | |
1da177e4 LT |
388 | |
389 | To compile this driver as a module, choose M here: the | |
390 | module will be called radio-typhoon. | |
391 | ||
1da177e4 LT |
392 | config RADIO_TYPHOON_PORT |
393 | hex "Typhoon I/O port (0x316 or 0x336)" | |
394 | depends on RADIO_TYPHOON=y | |
395 | default "316" | |
396 | help | |
397 | Enter the I/O port of your Typhoon or EcoRadio radio card. | |
398 | ||
399 | config RADIO_TYPHOON_MUTEFREQ | |
400 | int "Typhoon frequency set when muting the device (kHz)" | |
401 | depends on RADIO_TYPHOON=y | |
402 | default "87500" | |
403 | help | |
404 | Enter the frequency used for muting the radio. The device is never | |
405 | completely silent. If the volume is just turned down, you can still | |
406 | hear silent voices and music. For that reason, the frequency of the | |
407 | radio device is set to the frequency you can enter here whenever | |
408 | the device is muted. There should be no local radio station at that | |
409 | frequency. | |
410 | ||
411 | config RADIO_ZOLTRIX | |
412 | tristate "Zoltrix Radio" | |
2ab65299 | 413 | depends on ISA && VIDEO_V4L2 |
6b39246c | 414 | select RADIO_ISA |
1da177e4 LT |
415 | ---help--- |
416 | Choose Y here if you have one of these FM radio cards, and then fill | |
417 | in the port address below. | |
418 | ||
6b39246c HV |
419 | Note: this driver hasn't been tested since a long time due to lack |
420 | of hardware. If you have this hardware, then please contact the | |
421 | linux-media mailinglist. | |
1da177e4 LT |
422 | |
423 | To compile this driver as a module, choose M here: the | |
424 | module will be called radio-zoltrix. | |
425 | ||
426 | config RADIO_ZOLTRIX_PORT | |
427 | hex "ZOLTRIX I/O port (0x20c or 0x30c)" | |
428 | depends on RADIO_ZOLTRIX=y | |
429 | default "20c" | |
430 | help | |
431 | Enter the I/O port of your Zoltrix radio card. | |
432 | ||
e21d9865 | 433 | endif # V4L_RADIO_ISA_DRIVERS |
57f05bfa | 434 | |
c5da5afb | 435 | endif # RADIO_ADAPTERS |