Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * Video4Linux Colour QuickCam driver | |
3 | * Copyright 1997-2000 Philip Blundell <philb@gnu.org> | |
4 | * | |
5 | * Module parameters: | |
6 | * | |
7 | * parport=auto -- probe all parports (default) | |
8 | * parport=0 -- parport0 becomes qcam1 | |
9 | * parport=2,0,1 -- parports 2,0,1 are tried in that order | |
10 | * | |
11 | * probe=0 -- do no probing, assume camera is present | |
12 | * probe=1 -- use IEEE-1284 autoprobe data only (default) | |
13 | * probe=2 -- probe aggressively for cameras | |
14 | * | |
15 | * force_rgb=1 -- force data format to RGB (default is BGR) | |
16 | * | |
17 | * The parport parameter controls which parports will be scanned. | |
18 | * Scanning all parports causes some printers to print a garbage page. | |
d56410e0 | 19 | * -- March 14, 1999 Billy Donahue <billy@escape.com> |
1da177e4 LT |
20 | * |
21 | * Fixed data format to BGR, added force_rgb parameter. Added missing | |
22 | * parport_unregister_driver() on module removal. | |
23 | * -- May 28, 2000 Claudio Matsuoka <claudio@conectiva.com> | |
24 | */ | |
25 | ||
26 | #include <linux/module.h> | |
27 | #include <linux/delay.h> | |
28 | #include <linux/errno.h> | |
29 | #include <linux/fs.h> | |
30 | #include <linux/init.h> | |
31 | #include <linux/kernel.h> | |
32 | #include <linux/slab.h> | |
33 | #include <linux/mm.h> | |
34 | #include <linux/parport.h> | |
35 | #include <linux/sched.h> | |
36 | #include <linux/videodev.h> | |
5e87efa3 | 37 | #include <media/v4l2-common.h> |
35ea11ff | 38 | #include <media/v4l2-ioctl.h> |
3593cab5 | 39 | #include <linux/mutex.h> |
168c626c | 40 | #include <linux/jiffies.h> |
3593cab5 | 41 | |
1da177e4 LT |
42 | #include <asm/uaccess.h> |
43 | ||
44 | struct qcam_device { | |
45 | struct video_device vdev; | |
46 | struct pardevice *pdev; | |
47 | struct parport *pport; | |
48 | int width, height; | |
49 | int ccd_width, ccd_height; | |
50 | int mode; | |
51 | int contrast, brightness, whitebal; | |
52 | int top, left; | |
53 | unsigned int bidirectional; | |
7d43cd53 | 54 | unsigned long in_use; |
3593cab5 | 55 | struct mutex lock; |
1da177e4 LT |
56 | }; |
57 | ||
58 | /* cameras maximum */ | |
59 | #define MAX_CAMS 4 | |
60 | ||
61 | /* The three possible QuickCam modes */ | |
62 | #define QC_MILLIONS 0x18 | |
63 | #define QC_BILLIONS 0x10 | |
64 | #define QC_THOUSANDS 0x08 /* with VIDEC compression (not supported) */ | |
65 | ||
66 | /* The three possible decimations */ | |
67 | #define QC_DECIMATION_1 0 | |
68 | #define QC_DECIMATION_2 2 | |
69 | #define QC_DECIMATION_4 4 | |
70 | ||
71 | #define BANNER "Colour QuickCam for Video4Linux v0.05" | |
72 | ||
73 | static int parport[MAX_CAMS] = { [1 ... MAX_CAMS-1] = -1 }; | |
74 | static int probe = 2; | |
ff699e6b | 75 | static int force_rgb; |
1da177e4 LT |
76 | static int video_nr = -1; |
77 | ||
78 | static inline void qcam_set_ack(struct qcam_device *qcam, unsigned int i) | |
79 | { | |
80 | /* note: the QC specs refer to the PCAck pin by voltage, not | |
81 | software level. PC ports have builtin inverters. */ | |
82 | parport_frob_control(qcam->pport, 8, i?8:0); | |
83 | } | |
84 | ||
85 | static inline unsigned int qcam_ready1(struct qcam_device *qcam) | |
86 | { | |
87 | return (parport_read_status(qcam->pport) & 0x8)?1:0; | |
88 | } | |
89 | ||
90 | static inline unsigned int qcam_ready2(struct qcam_device *qcam) | |
91 | { | |
92 | return (parport_read_data(qcam->pport) & 0x1)?1:0; | |
93 | } | |
94 | ||
d56410e0 | 95 | static unsigned int qcam_await_ready1(struct qcam_device *qcam, |
1da177e4 LT |
96 | int value) |
97 | { | |
98 | unsigned long oldjiffies = jiffies; | |
99 | unsigned int i; | |
100 | ||
168c626c JL |
101 | for (oldjiffies = jiffies; |
102 | time_before(jiffies, oldjiffies + msecs_to_jiffies(40)); ) | |
1da177e4 LT |
103 | if (qcam_ready1(qcam) == value) |
104 | return 0; | |
105 | ||
d56410e0 | 106 | /* If the camera didn't respond within 1/25 second, poll slowly |
1da177e4 LT |
107 | for a while. */ |
108 | for (i = 0; i < 50; i++) | |
109 | { | |
110 | if (qcam_ready1(qcam) == value) | |
111 | return 0; | |
112 | msleep_interruptible(100); | |
113 | } | |
114 | ||
115 | /* Probably somebody pulled the plug out. Not much we can do. */ | |
116 | printk(KERN_ERR "c-qcam: ready1 timeout (%d) %x %x\n", value, | |
117 | parport_read_status(qcam->pport), | |
118 | parport_read_control(qcam->pport)); | |
119 | return 1; | |
120 | } | |
121 | ||
122 | static unsigned int qcam_await_ready2(struct qcam_device *qcam, int value) | |
123 | { | |
124 | unsigned long oldjiffies = jiffies; | |
125 | unsigned int i; | |
126 | ||
168c626c JL |
127 | for (oldjiffies = jiffies; |
128 | time_before(jiffies, oldjiffies + msecs_to_jiffies(40)); ) | |
1da177e4 LT |
129 | if (qcam_ready2(qcam) == value) |
130 | return 0; | |
131 | ||
d56410e0 | 132 | /* If the camera didn't respond within 1/25 second, poll slowly |
1da177e4 LT |
133 | for a while. */ |
134 | for (i = 0; i < 50; i++) | |
135 | { | |
136 | if (qcam_ready2(qcam) == value) | |
137 | return 0; | |
138 | msleep_interruptible(100); | |
139 | } | |
140 | ||
141 | /* Probably somebody pulled the plug out. Not much we can do. */ | |
142 | printk(KERN_ERR "c-qcam: ready2 timeout (%d) %x %x %x\n", value, | |
143 | parport_read_status(qcam->pport), | |
144 | parport_read_control(qcam->pport), | |
145 | parport_read_data(qcam->pport)); | |
146 | return 1; | |
147 | } | |
148 | ||
149 | static int qcam_read_data(struct qcam_device *qcam) | |
150 | { | |
151 | unsigned int idata; | |
152 | qcam_set_ack(qcam, 0); | |
153 | if (qcam_await_ready1(qcam, 1)) return -1; | |
154 | idata = parport_read_status(qcam->pport) & 0xf0; | |
155 | qcam_set_ack(qcam, 1); | |
156 | if (qcam_await_ready1(qcam, 0)) return -1; | |
157 | idata |= (parport_read_status(qcam->pport) >> 4); | |
158 | return idata; | |
159 | } | |
160 | ||
161 | static int qcam_write_data(struct qcam_device *qcam, unsigned int data) | |
162 | { | |
163 | unsigned int idata; | |
164 | parport_write_data(qcam->pport, data); | |
165 | idata = qcam_read_data(qcam); | |
d56410e0 | 166 | if (data != idata) |
1da177e4 | 167 | { |
d56410e0 | 168 | printk(KERN_WARNING "cqcam: sent %x but received %x\n", data, |
1da177e4 LT |
169 | idata); |
170 | return 1; | |
d56410e0 | 171 | } |
1da177e4 LT |
172 | return 0; |
173 | } | |
174 | ||
175 | static inline int qcam_set(struct qcam_device *qcam, unsigned int cmd, unsigned int data) | |
176 | { | |
177 | if (qcam_write_data(qcam, cmd)) | |
178 | return -1; | |
179 | if (qcam_write_data(qcam, data)) | |
180 | return -1; | |
181 | return 0; | |
182 | } | |
183 | ||
184 | static inline int qcam_get(struct qcam_device *qcam, unsigned int cmd) | |
185 | { | |
186 | if (qcam_write_data(qcam, cmd)) | |
187 | return -1; | |
188 | return qcam_read_data(qcam); | |
189 | } | |
190 | ||
191 | static int qc_detect(struct qcam_device *qcam) | |
192 | { | |
193 | unsigned int stat, ostat, i, count = 0; | |
194 | ||
195 | /* The probe routine below is not very reliable. The IEEE-1284 | |
196 | probe takes precedence. */ | |
197 | /* XXX Currently parport provides no way to distinguish between | |
198 | "the IEEE probe was not done" and "the probe was done, but | |
199 | no device was found". Fix this one day. */ | |
200 | if (qcam->pport->probe_info[0].class == PARPORT_CLASS_MEDIA | |
201 | && qcam->pport->probe_info[0].model | |
d56410e0 | 202 | && !strcmp(qcam->pdev->port->probe_info[0].model, |
1da177e4 LT |
203 | "Color QuickCam 2.0")) { |
204 | printk(KERN_DEBUG "QuickCam: Found by IEEE1284 probe.\n"); | |
205 | return 1; | |
206 | } | |
d56410e0 | 207 | |
1da177e4 LT |
208 | if (probe < 2) |
209 | return 0; | |
210 | ||
211 | parport_write_control(qcam->pport, 0xc); | |
212 | ||
213 | /* look for a heartbeat */ | |
214 | ostat = stat = parport_read_status(qcam->pport); | |
d56410e0 | 215 | for (i=0; i<250; i++) |
1da177e4 LT |
216 | { |
217 | mdelay(1); | |
218 | stat = parport_read_status(qcam->pport); | |
d56410e0 | 219 | if (ostat != stat) |
1da177e4 LT |
220 | { |
221 | if (++count >= 3) return 1; | |
222 | ostat = stat; | |
223 | } | |
224 | } | |
225 | ||
226 | /* Reset the camera and try again */ | |
227 | parport_write_control(qcam->pport, 0xc); | |
228 | parport_write_control(qcam->pport, 0x8); | |
229 | mdelay(1); | |
230 | parport_write_control(qcam->pport, 0xc); | |
231 | mdelay(1); | |
232 | count = 0; | |
233 | ||
234 | ostat = stat = parport_read_status(qcam->pport); | |
d56410e0 | 235 | for (i=0; i<250; i++) |
1da177e4 LT |
236 | { |
237 | mdelay(1); | |
238 | stat = parport_read_status(qcam->pport); | |
d56410e0 | 239 | if (ostat != stat) |
1da177e4 LT |
240 | { |
241 | if (++count >= 3) return 1; | |
242 | ostat = stat; | |
243 | } | |
244 | } | |
245 | ||
246 | /* no (or flatline) camera, give up */ | |
247 | return 0; | |
248 | } | |
249 | ||
250 | static void qc_reset(struct qcam_device *qcam) | |
251 | { | |
252 | parport_write_control(qcam->pport, 0xc); | |
253 | parport_write_control(qcam->pport, 0x8); | |
254 | mdelay(1); | |
255 | parport_write_control(qcam->pport, 0xc); | |
d56410e0 | 256 | mdelay(1); |
1da177e4 LT |
257 | } |
258 | ||
259 | /* Reset the QuickCam and program for brightness, contrast, | |
260 | * white-balance, and resolution. */ | |
261 | ||
262 | static void qc_setup(struct qcam_device *q) | |
263 | { | |
264 | qc_reset(q); | |
265 | ||
266 | /* Set the brightness. */ | |
d56410e0 | 267 | qcam_set(q, 11, q->brightness); |
1da177e4 LT |
268 | |
269 | /* Set the height and width. These refer to the actual | |
270 | CCD area *before* applying the selected decimation. */ | |
271 | qcam_set(q, 17, q->ccd_height); | |
272 | qcam_set(q, 19, q->ccd_width / 2); | |
273 | ||
274 | /* Set top and left. */ | |
275 | qcam_set(q, 0xd, q->top); | |
276 | qcam_set(q, 0xf, q->left); | |
277 | ||
278 | /* Set contrast and white balance. */ | |
279 | qcam_set(q, 0x19, q->contrast); | |
280 | qcam_set(q, 0x1f, q->whitebal); | |
d56410e0 | 281 | |
1da177e4 LT |
282 | /* Set the speed. */ |
283 | qcam_set(q, 45, 2); | |
284 | } | |
285 | ||
d56410e0 | 286 | /* Read some bytes from the camera and put them in the buffer. |
1da177e4 LT |
287 | nbytes should be a multiple of 3, because bidirectional mode gives |
288 | us three bytes at a time. */ | |
289 | ||
290 | static unsigned int qcam_read_bytes(struct qcam_device *q, unsigned char *buf, unsigned int nbytes) | |
291 | { | |
292 | unsigned int bytes = 0; | |
293 | ||
294 | qcam_set_ack(q, 0); | |
295 | if (q->bidirectional) | |
296 | { | |
297 | /* It's a bidirectional port */ | |
298 | while (bytes < nbytes) | |
299 | { | |
300 | unsigned int lo1, hi1, lo2, hi2; | |
301 | unsigned char r, g, b; | |
302 | ||
303 | if (qcam_await_ready2(q, 1)) return bytes; | |
304 | lo1 = parport_read_data(q->pport) >> 1; | |
305 | hi1 = ((parport_read_status(q->pport) >> 3) & 0x1f) ^ 0x10; | |
306 | qcam_set_ack(q, 1); | |
307 | if (qcam_await_ready2(q, 0)) return bytes; | |
308 | lo2 = parport_read_data(q->pport) >> 1; | |
309 | hi2 = ((parport_read_status(q->pport) >> 3) & 0x1f) ^ 0x10; | |
310 | qcam_set_ack(q, 0); | |
311 | r = (lo1 | ((hi1 & 1)<<7)); | |
312 | g = ((hi1 & 0x1e)<<3) | ((hi2 & 0x1e)>>1); | |
313 | b = (lo2 | ((hi2 & 1)<<7)); | |
314 | if (force_rgb) { | |
315 | buf[bytes++] = r; | |
316 | buf[bytes++] = g; | |
317 | buf[bytes++] = b; | |
318 | } else { | |
319 | buf[bytes++] = b; | |
320 | buf[bytes++] = g; | |
321 | buf[bytes++] = r; | |
322 | } | |
323 | } | |
324 | } | |
325 | else | |
326 | { | |
327 | /* It's a unidirectional port */ | |
328 | int i = 0, n = bytes; | |
329 | unsigned char rgb[3]; | |
330 | ||
331 | while (bytes < nbytes) | |
332 | { | |
333 | unsigned int hi, lo; | |
334 | ||
335 | if (qcam_await_ready1(q, 1)) return bytes; | |
336 | hi = (parport_read_status(q->pport) & 0xf0); | |
337 | qcam_set_ack(q, 1); | |
338 | if (qcam_await_ready1(q, 0)) return bytes; | |
339 | lo = (parport_read_status(q->pport) & 0xf0); | |
340 | qcam_set_ack(q, 0); | |
341 | /* flip some bits */ | |
342 | rgb[(i = bytes++ % 3)] = (hi | (lo >> 4)) ^ 0x88; | |
343 | if (i >= 2) { | |
344 | get_fragment: | |
345 | if (force_rgb) { | |
346 | buf[n++] = rgb[0]; | |
347 | buf[n++] = rgb[1]; | |
348 | buf[n++] = rgb[2]; | |
349 | } else { | |
350 | buf[n++] = rgb[2]; | |
351 | buf[n++] = rgb[1]; | |
352 | buf[n++] = rgb[0]; | |
353 | } | |
354 | } | |
355 | } | |
356 | if (i) { | |
357 | i = 0; | |
358 | goto get_fragment; | |
359 | } | |
360 | } | |
361 | return bytes; | |
362 | } | |
363 | ||
364 | #define BUFSZ 150 | |
365 | ||
366 | static long qc_capture(struct qcam_device *q, char __user *buf, unsigned long len) | |
367 | { | |
368 | unsigned lines, pixelsperline, bitsperxfer; | |
369 | unsigned int is_bi_dir = q->bidirectional; | |
370 | size_t wantlen, outptr = 0; | |
371 | char tmpbuf[BUFSZ]; | |
372 | ||
373 | if (!access_ok(VERIFY_WRITE, buf, len)) | |
374 | return -EFAULT; | |
375 | ||
376 | /* Wait for camera to become ready */ | |
377 | for (;;) | |
378 | { | |
379 | int i = qcam_get(q, 41); | |
380 | if (i == -1) { | |
381 | qc_setup(q); | |
382 | return -EIO; | |
383 | } | |
384 | if ((i & 0x80) == 0) | |
385 | break; | |
386 | else | |
387 | schedule(); | |
388 | } | |
389 | ||
390 | if (qcam_set(q, 7, (q->mode | (is_bi_dir?1:0)) + 1)) | |
391 | return -EIO; | |
d56410e0 | 392 | |
1da177e4 LT |
393 | lines = q->height; |
394 | pixelsperline = q->width; | |
395 | bitsperxfer = (is_bi_dir) ? 24 : 8; | |
396 | ||
397 | if (is_bi_dir) | |
398 | { | |
399 | /* Turn the port around */ | |
400 | parport_data_reverse(q->pport); | |
401 | mdelay(3); | |
402 | qcam_set_ack(q, 0); | |
403 | if (qcam_await_ready1(q, 1)) { | |
404 | qc_setup(q); | |
405 | return -EIO; | |
406 | } | |
407 | qcam_set_ack(q, 1); | |
408 | if (qcam_await_ready1(q, 0)) { | |
409 | qc_setup(q); | |
410 | return -EIO; | |
411 | } | |
412 | } | |
413 | ||
414 | wantlen = lines * pixelsperline * 24 / 8; | |
415 | ||
416 | while (wantlen) | |
417 | { | |
418 | size_t t, s; | |
419 | s = (wantlen > BUFSZ)?BUFSZ:wantlen; | |
420 | t = qcam_read_bytes(q, tmpbuf, s); | |
421 | if (outptr < len) | |
422 | { | |
423 | size_t sz = len - outptr; | |
424 | if (sz > t) sz = t; | |
425 | if (__copy_to_user(buf+outptr, tmpbuf, sz)) | |
426 | break; | |
427 | outptr += sz; | |
428 | } | |
429 | wantlen -= t; | |
430 | if (t < s) | |
431 | break; | |
432 | cond_resched(); | |
433 | } | |
434 | ||
435 | len = outptr; | |
436 | ||
437 | if (wantlen) | |
438 | { | |
439 | printk("qcam: short read.\n"); | |
440 | if (is_bi_dir) | |
441 | parport_data_forward(q->pport); | |
442 | qc_setup(q); | |
443 | return len; | |
444 | } | |
445 | ||
446 | if (is_bi_dir) | |
447 | { | |
448 | int l; | |
449 | do { | |
450 | l = qcam_read_bytes(q, tmpbuf, 3); | |
451 | cond_resched(); | |
452 | } while (l && (tmpbuf[0] == 0x7e || tmpbuf[1] == 0x7e || tmpbuf[2] == 0x7e)); | |
453 | if (force_rgb) { | |
454 | if (tmpbuf[0] != 0xe || tmpbuf[1] != 0x0 || tmpbuf[2] != 0xf) | |
455 | printk("qcam: bad EOF\n"); | |
456 | } else { | |
457 | if (tmpbuf[0] != 0xf || tmpbuf[1] != 0x0 || tmpbuf[2] != 0xe) | |
458 | printk("qcam: bad EOF\n"); | |
459 | } | |
460 | qcam_set_ack(q, 0); | |
461 | if (qcam_await_ready1(q, 1)) | |
462 | { | |
463 | printk("qcam: no ack after EOF\n"); | |
464 | parport_data_forward(q->pport); | |
465 | qc_setup(q); | |
466 | return len; | |
467 | } | |
468 | parport_data_forward(q->pport); | |
469 | mdelay(3); | |
470 | qcam_set_ack(q, 1); | |
471 | if (qcam_await_ready1(q, 0)) | |
472 | { | |
473 | printk("qcam: no ack to port turnaround\n"); | |
474 | qc_setup(q); | |
475 | return len; | |
476 | } | |
477 | } | |
478 | else | |
479 | { | |
480 | int l; | |
481 | do { | |
482 | l = qcam_read_bytes(q, tmpbuf, 1); | |
483 | cond_resched(); | |
484 | } while (l && tmpbuf[0] == 0x7e); | |
485 | l = qcam_read_bytes(q, tmpbuf+1, 2); | |
486 | if (force_rgb) { | |
487 | if (tmpbuf[0] != 0xe || tmpbuf[1] != 0x0 || tmpbuf[2] != 0xf) | |
488 | printk("qcam: bad EOF\n"); | |
489 | } else { | |
490 | if (tmpbuf[0] != 0xf || tmpbuf[1] != 0x0 || tmpbuf[2] != 0xe) | |
491 | printk("qcam: bad EOF\n"); | |
492 | } | |
493 | } | |
494 | ||
495 | qcam_write_data(q, 0); | |
496 | return len; | |
497 | } | |
498 | ||
499 | /* | |
500 | * Video4linux interfacing | |
501 | */ | |
502 | ||
069b7479 | 503 | static long qcam_do_ioctl(struct file *file, unsigned int cmd, void *arg) |
1da177e4 LT |
504 | { |
505 | struct video_device *dev = video_devdata(file); | |
506 | struct qcam_device *qcam=(struct qcam_device *)dev; | |
d56410e0 | 507 | |
1da177e4 LT |
508 | switch(cmd) |
509 | { | |
510 | case VIDIOCGCAP: | |
511 | { | |
512 | struct video_capability *b = arg; | |
513 | strcpy(b->name, "Quickcam"); | |
514 | b->type = VID_TYPE_CAPTURE|VID_TYPE_SCALES; | |
515 | b->channels = 1; | |
516 | b->audios = 0; | |
517 | b->maxwidth = 320; | |
518 | b->maxheight = 240; | |
519 | b->minwidth = 80; | |
520 | b->minheight = 60; | |
521 | return 0; | |
522 | } | |
523 | case VIDIOCGCHAN: | |
524 | { | |
525 | struct video_channel *v = arg; | |
526 | if(v->channel!=0) | |
527 | return -EINVAL; | |
528 | v->flags=0; | |
529 | v->tuners=0; | |
530 | /* Good question.. its composite or SVHS so.. */ | |
531 | v->type = VIDEO_TYPE_CAMERA; | |
532 | strcpy(v->name, "Camera"); | |
533 | return 0; | |
534 | } | |
535 | case VIDIOCSCHAN: | |
536 | { | |
537 | struct video_channel *v = arg; | |
538 | if(v->channel!=0) | |
539 | return -EINVAL; | |
540 | return 0; | |
541 | } | |
542 | case VIDIOCGTUNER: | |
543 | { | |
544 | struct video_tuner *v = arg; | |
545 | if(v->tuner) | |
546 | return -EINVAL; | |
547 | memset(v,0,sizeof(*v)); | |
548 | strcpy(v->name, "Format"); | |
549 | v->mode = VIDEO_MODE_AUTO; | |
550 | return 0; | |
551 | } | |
552 | case VIDIOCSTUNER: | |
553 | { | |
554 | struct video_tuner *v = arg; | |
555 | if(v->tuner) | |
556 | return -EINVAL; | |
557 | if(v->mode!=VIDEO_MODE_AUTO) | |
558 | return -EINVAL; | |
559 | return 0; | |
560 | } | |
561 | case VIDIOCGPICT: | |
562 | { | |
563 | struct video_picture *p = arg; | |
564 | p->colour=0x8000; | |
565 | p->hue=0x8000; | |
566 | p->brightness=qcam->brightness<<8; | |
567 | p->contrast=qcam->contrast<<8; | |
568 | p->whiteness=qcam->whitebal<<8; | |
569 | p->depth=24; | |
570 | p->palette=VIDEO_PALETTE_RGB24; | |
571 | return 0; | |
572 | } | |
573 | case VIDIOCSPICT: | |
574 | { | |
575 | struct video_picture *p = arg; | |
576 | ||
577 | /* | |
578 | * Sanity check args | |
579 | */ | |
580 | if (p->depth != 24 || p->palette != VIDEO_PALETTE_RGB24) | |
581 | return -EINVAL; | |
d56410e0 | 582 | |
1da177e4 LT |
583 | /* |
584 | * Now load the camera. | |
585 | */ | |
586 | qcam->brightness = p->brightness>>8; | |
587 | qcam->contrast = p->contrast>>8; | |
588 | qcam->whitebal = p->whiteness>>8; | |
589 | ||
3593cab5 | 590 | mutex_lock(&qcam->lock); |
1da177e4 | 591 | parport_claim_or_block(qcam->pdev); |
d56410e0 | 592 | qc_setup(qcam); |
1da177e4 | 593 | parport_release(qcam->pdev); |
3593cab5 | 594 | mutex_unlock(&qcam->lock); |
1da177e4 LT |
595 | return 0; |
596 | } | |
597 | case VIDIOCSWIN: | |
598 | { | |
599 | struct video_window *vw = arg; | |
600 | ||
601 | if(vw->flags) | |
602 | return -EINVAL; | |
603 | if(vw->clipcount) | |
604 | return -EINVAL; | |
605 | if(vw->height<60||vw->height>240) | |
606 | return -EINVAL; | |
607 | if(vw->width<80||vw->width>320) | |
608 | return -EINVAL; | |
d56410e0 | 609 | |
1da177e4 LT |
610 | qcam->width = 80; |
611 | qcam->height = 60; | |
612 | qcam->mode = QC_DECIMATION_4; | |
d56410e0 | 613 | |
1da177e4 LT |
614 | if(vw->width>=160 && vw->height>=120) |
615 | { | |
616 | qcam->width = 160; | |
617 | qcam->height = 120; | |
618 | qcam->mode = QC_DECIMATION_2; | |
619 | } | |
620 | if(vw->width>=320 && vw->height>=240) | |
621 | { | |
622 | qcam->width = 320; | |
623 | qcam->height = 240; | |
624 | qcam->mode = QC_DECIMATION_1; | |
625 | } | |
626 | qcam->mode |= QC_MILLIONS; | |
627 | #if 0 | |
628 | if(vw->width>=640 && vw->height>=480) | |
629 | { | |
630 | qcam->width = 640; | |
631 | qcam->height = 480; | |
632 | qcam->mode = QC_BILLIONS | QC_DECIMATION_1; | |
633 | } | |
634 | #endif | |
d56410e0 | 635 | /* Ok we figured out what to use from our |
1da177e4 | 636 | wide choice */ |
3593cab5 | 637 | mutex_lock(&qcam->lock); |
1da177e4 LT |
638 | parport_claim_or_block(qcam->pdev); |
639 | qc_setup(qcam); | |
640 | parport_release(qcam->pdev); | |
3593cab5 | 641 | mutex_unlock(&qcam->lock); |
1da177e4 LT |
642 | return 0; |
643 | } | |
644 | case VIDIOCGWIN: | |
645 | { | |
646 | struct video_window *vw = arg; | |
647 | memset(vw, 0, sizeof(*vw)); | |
648 | vw->width=qcam->width; | |
649 | vw->height=qcam->height; | |
650 | return 0; | |
651 | } | |
652 | case VIDIOCKEY: | |
653 | return 0; | |
654 | case VIDIOCCAPTURE: | |
655 | case VIDIOCGFBUF: | |
656 | case VIDIOCSFBUF: | |
657 | case VIDIOCGFREQ: | |
658 | case VIDIOCSFREQ: | |
659 | case VIDIOCGAUDIO: | |
660 | case VIDIOCSAUDIO: | |
661 | return -EINVAL; | |
662 | default: | |
663 | return -ENOIOCTLCMD; | |
664 | } | |
665 | return 0; | |
666 | } | |
667 | ||
069b7479 | 668 | static long qcam_ioctl(struct file *file, |
f473bf76 | 669 | unsigned int cmd, unsigned long arg) |
1da177e4 | 670 | { |
f473bf76 | 671 | return video_usercopy(file, cmd, arg, qcam_do_ioctl); |
1da177e4 LT |
672 | } |
673 | ||
674 | static ssize_t qcam_read(struct file *file, char __user *buf, | |
675 | size_t count, loff_t *ppos) | |
676 | { | |
677 | struct video_device *v = video_devdata(file); | |
678 | struct qcam_device *qcam=(struct qcam_device *)v; | |
679 | int len; | |
680 | ||
3593cab5 | 681 | mutex_lock(&qcam->lock); |
1da177e4 LT |
682 | parport_claim_or_block(qcam->pdev); |
683 | /* Probably should have a semaphore against multiple users */ | |
d56410e0 | 684 | len = qc_capture(qcam, buf,count); |
1da177e4 | 685 | parport_release(qcam->pdev); |
3593cab5 | 686 | mutex_unlock(&qcam->lock); |
1da177e4 LT |
687 | return len; |
688 | } | |
689 | ||
bec43661 | 690 | static int qcam_exclusive_open(struct file *file) |
7d43cd53 HV |
691 | { |
692 | struct video_device *dev = video_devdata(file); | |
693 | struct qcam_device *qcam = (struct qcam_device *)dev; | |
694 | ||
695 | return test_and_set_bit(0, &qcam->in_use) ? -EBUSY : 0; | |
696 | } | |
697 | ||
bec43661 | 698 | static int qcam_exclusive_release(struct file *file) |
7d43cd53 HV |
699 | { |
700 | struct video_device *dev = video_devdata(file); | |
701 | struct qcam_device *qcam = (struct qcam_device *)dev; | |
702 | ||
703 | clear_bit(0, &qcam->in_use); | |
704 | return 0; | |
705 | } | |
706 | ||
1da177e4 | 707 | /* video device template */ |
bec43661 | 708 | static const struct v4l2_file_operations qcam_fops = { |
1da177e4 | 709 | .owner = THIS_MODULE, |
7d43cd53 HV |
710 | .open = qcam_exclusive_open, |
711 | .release = qcam_exclusive_release, | |
1da177e4 LT |
712 | .ioctl = qcam_ioctl, |
713 | .read = qcam_read, | |
1da177e4 LT |
714 | }; |
715 | ||
716 | static struct video_device qcam_template= | |
717 | { | |
1da177e4 | 718 | .name = "Colour QuickCam", |
1da177e4 | 719 | .fops = &qcam_fops, |
aa5e90af | 720 | .release = video_device_release_empty, |
1da177e4 LT |
721 | }; |
722 | ||
723 | /* Initialize the QuickCam driver control structure. */ | |
724 | ||
725 | static struct qcam_device *qcam_init(struct parport *port) | |
726 | { | |
727 | struct qcam_device *q; | |
d56410e0 | 728 | |
1da177e4 LT |
729 | q = kmalloc(sizeof(struct qcam_device), GFP_KERNEL); |
730 | if(q==NULL) | |
731 | return NULL; | |
732 | ||
733 | q->pport = port; | |
734 | q->pdev = parport_register_device(port, "c-qcam", NULL, NULL, | |
735 | NULL, 0, NULL); | |
736 | ||
737 | q->bidirectional = (q->pport->modes & PARPORT_MODE_TRISTATE)?1:0; | |
738 | ||
d56410e0 | 739 | if (q->pdev == NULL) |
1da177e4 LT |
740 | { |
741 | printk(KERN_ERR "c-qcam: couldn't register for %s.\n", | |
742 | port->name); | |
743 | kfree(q); | |
744 | return NULL; | |
745 | } | |
d56410e0 | 746 | |
1da177e4 LT |
747 | memcpy(&q->vdev, &qcam_template, sizeof(qcam_template)); |
748 | ||
3593cab5 | 749 | mutex_init(&q->lock); |
1da177e4 LT |
750 | q->width = q->ccd_width = 320; |
751 | q->height = q->ccd_height = 240; | |
752 | q->mode = QC_MILLIONS | QC_DECIMATION_1; | |
753 | q->contrast = 192; | |
754 | q->brightness = 240; | |
755 | q->whitebal = 128; | |
756 | q->top = 1; | |
757 | q->left = 14; | |
758 | return q; | |
759 | } | |
760 | ||
761 | static struct qcam_device *qcams[MAX_CAMS]; | |
ff699e6b | 762 | static unsigned int num_cams; |
1da177e4 LT |
763 | |
764 | static int init_cqcam(struct parport *port) | |
765 | { | |
766 | struct qcam_device *qcam; | |
767 | ||
768 | if (parport[0] != -1) | |
769 | { | |
770 | /* The user gave specific instructions */ | |
771 | int i, found = 0; | |
772 | for (i = 0; i < MAX_CAMS && parport[i] != -1; i++) | |
773 | { | |
774 | if (parport[0] == port->number) | |
775 | found = 1; | |
776 | } | |
777 | if (!found) | |
778 | return -ENODEV; | |
779 | } | |
780 | ||
781 | if (num_cams == MAX_CAMS) | |
782 | return -ENOSPC; | |
783 | ||
784 | qcam = qcam_init(port); | |
785 | if (qcam==NULL) | |
786 | return -ENODEV; | |
d56410e0 | 787 | |
1da177e4 LT |
788 | parport_claim_or_block(qcam->pdev); |
789 | ||
790 | qc_reset(qcam); | |
d56410e0 | 791 | |
1da177e4 LT |
792 | if (probe && qc_detect(qcam)==0) |
793 | { | |
794 | parport_release(qcam->pdev); | |
795 | parport_unregister_device(qcam->pdev); | |
796 | kfree(qcam); | |
797 | return -ENODEV; | |
798 | } | |
799 | ||
800 | qc_setup(qcam); | |
801 | ||
802 | parport_release(qcam->pdev); | |
d56410e0 | 803 | |
dc60de33 | 804 | if (video_register_device(&qcam->vdev, VFL_TYPE_GRABBER, video_nr) < 0) { |
1da177e4 LT |
805 | printk(KERN_ERR "Unable to register Colour QuickCam on %s\n", |
806 | qcam->pport->name); | |
807 | parport_unregister_device(qcam->pdev); | |
808 | kfree(qcam); | |
809 | return -ENODEV; | |
810 | } | |
811 | ||
d56410e0 | 812 | printk(KERN_INFO "video%d: Colour QuickCam found on %s\n", |
c6330fb8 | 813 | qcam->vdev.num, qcam->pport->name); |
d56410e0 | 814 | |
1da177e4 LT |
815 | qcams[num_cams++] = qcam; |
816 | ||
817 | return 0; | |
818 | } | |
819 | ||
820 | static void close_cqcam(struct qcam_device *qcam) | |
821 | { | |
822 | video_unregister_device(&qcam->vdev); | |
823 | parport_unregister_device(qcam->pdev); | |
824 | kfree(qcam); | |
825 | } | |
826 | ||
827 | static void cq_attach(struct parport *port) | |
828 | { | |
829 | init_cqcam(port); | |
830 | } | |
831 | ||
832 | static void cq_detach(struct parport *port) | |
833 | { | |
834 | /* Write this some day. */ | |
835 | } | |
836 | ||
837 | static struct parport_driver cqcam_driver = { | |
838 | .name = "cqcam", | |
839 | .attach = cq_attach, | |
840 | .detach = cq_detach, | |
841 | }; | |
842 | ||
843 | static int __init cqcam_init (void) | |
844 | { | |
845 | printk(BANNER "\n"); | |
846 | ||
847 | return parport_register_driver(&cqcam_driver); | |
848 | } | |
849 | ||
850 | static void __exit cqcam_cleanup (void) | |
851 | { | |
852 | unsigned int i; | |
853 | ||
854 | for (i = 0; i < num_cams; i++) | |
855 | close_cqcam(qcams[i]); | |
856 | ||
857 | parport_unregister_driver(&cqcam_driver); | |
858 | } | |
859 | ||
860 | MODULE_AUTHOR("Philip Blundell <philb@gnu.org>"); | |
861 | MODULE_DESCRIPTION(BANNER); | |
862 | MODULE_LICENSE("GPL"); | |
863 | ||
864 | /* FIXME: parport=auto would never have worked, surely? --RR */ | |
865 | MODULE_PARM_DESC(parport ,"parport=<auto|n[,n]...> for port detection method\n\ | |
866 | probe=<0|1|2> for camera detection method\n\ | |
867 | force_rgb=<0|1> for RGB data format (default BGR)"); | |
868 | module_param_array(parport, int, NULL, 0); | |
869 | module_param(probe, int, 0); | |
870 | module_param(force_rgb, bool, 0); | |
871 | module_param(video_nr, int, 0); | |
872 | ||
873 | module_init(cqcam_init); | |
874 | module_exit(cqcam_cleanup); |