Commit | Line | Data |
---|---|---|
a5e90862 SA |
1 | /* |
2 | * drivers/media/video/tcm825x.c | |
3 | * | |
4 | * TCM825X camera sensor driver. | |
5 | * | |
6 | * Copyright (C) 2007 Nokia Corporation. | |
7 | * | |
8 | * Contact: Sakari Ailus <sakari.ailus@nokia.com> | |
9 | * | |
10 | * Based on code from David Cohen <david.cohen@indt.org.br> | |
11 | * | |
12 | * This driver was based on ov9640 sensor driver from MontaVista | |
13 | * | |
14 | * This program is free software; you can redistribute it and/or | |
15 | * modify it under the terms of the GNU General Public License | |
16 | * version 2 as published by the Free Software Foundation. | |
17 | * | |
18 | * This program is distributed in the hope that it will be useful, but | |
19 | * WITHOUT ANY WARRANTY; without even the implied warranty of | |
20 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
21 | * General Public License for more details. | |
22 | * | |
23 | * You should have received a copy of the GNU General Public License | |
24 | * along with this program; if not, write to the Free Software | |
25 | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA | |
26 | * 02110-1301 USA | |
27 | */ | |
28 | ||
29 | #include <linux/i2c.h> | |
30 | #include <media/v4l2-int-device.h> | |
31 | ||
32 | #include "tcm825x.h" | |
33 | ||
34 | /* | |
35 | * The sensor has two fps modes: the lower one just gives half the fps | |
36 | * at the same xclk than the high one. | |
37 | */ | |
38 | #define MAX_FPS 30 | |
39 | #define MIN_FPS 8 | |
40 | #define MAX_HALF_FPS (MAX_FPS / 2) | |
41 | #define HIGH_FPS_MODE_LOWER_LIMIT 14 | |
42 | #define DEFAULT_FPS MAX_HALF_FPS | |
43 | ||
44 | struct tcm825x_sensor { | |
45 | const struct tcm825x_platform_data *platform_data; | |
46 | struct v4l2_int_device *v4l2_int_device; | |
47 | struct i2c_client *i2c_client; | |
48 | struct v4l2_pix_format pix; | |
49 | struct v4l2_fract timeperframe; | |
50 | }; | |
51 | ||
52 | /* list of image formats supported by TCM825X sensor */ | |
e23b2907 | 53 | static const struct v4l2_fmtdesc tcm825x_formats[] = { |
a5e90862 SA |
54 | { |
55 | .description = "YUYV (YUV 4:2:2), packed", | |
56 | .pixelformat = V4L2_PIX_FMT_UYVY, | |
57 | }, { | |
58 | /* Note: V4L2 defines RGB565 as: | |
59 | * | |
60 | * Byte 0 Byte 1 | |
61 | * g2 g1 g0 r4 r3 r2 r1 r0 b4 b3 b2 b1 b0 g5 g4 g3 | |
62 | * | |
63 | * We interpret RGB565 as: | |
64 | * | |
65 | * Byte 0 Byte 1 | |
66 | * g2 g1 g0 b4 b3 b2 b1 b0 r4 r3 r2 r1 r0 g5 g4 g3 | |
67 | */ | |
68 | .description = "RGB565, le", | |
69 | .pixelformat = V4L2_PIX_FMT_RGB565, | |
70 | }, | |
71 | }; | |
72 | ||
73 | #define TCM825X_NUM_CAPTURE_FORMATS ARRAY_SIZE(tcm825x_formats) | |
74 | ||
75 | /* | |
76 | * TCM825X register configuration for all combinations of pixel format and | |
77 | * image size | |
78 | */ | |
e23b2907 TK |
79 | static const struct tcm825x_reg subqcif = { 0x20, TCM825X_PICSIZ }; |
80 | static const struct tcm825x_reg qcif = { 0x18, TCM825X_PICSIZ }; | |
81 | static const struct tcm825x_reg cif = { 0x14, TCM825X_PICSIZ }; | |
82 | static const struct tcm825x_reg qqvga = { 0x0c, TCM825X_PICSIZ }; | |
83 | static const struct tcm825x_reg qvga = { 0x04, TCM825X_PICSIZ }; | |
84 | static const struct tcm825x_reg vga = { 0x00, TCM825X_PICSIZ }; | |
a5e90862 | 85 | |
e23b2907 TK |
86 | static const struct tcm825x_reg yuv422 = { 0x00, TCM825X_PICFMT }; |
87 | static const struct tcm825x_reg rgb565 = { 0x02, TCM825X_PICFMT }; | |
a5e90862 SA |
88 | |
89 | /* Our own specific controls */ | |
90 | #define V4L2_CID_ALC V4L2_CID_PRIVATE_BASE | |
91 | #define V4L2_CID_H_EDGE_EN V4L2_CID_PRIVATE_BASE + 1 | |
92 | #define V4L2_CID_V_EDGE_EN V4L2_CID_PRIVATE_BASE + 2 | |
93 | #define V4L2_CID_LENS V4L2_CID_PRIVATE_BASE + 3 | |
94 | #define V4L2_CID_MAX_EXPOSURE_TIME V4L2_CID_PRIVATE_BASE + 4 | |
95 | #define V4L2_CID_LAST_PRIV V4L2_CID_MAX_EXPOSURE_TIME | |
96 | ||
97 | /* Video controls */ | |
98 | static struct vcontrol { | |
99 | struct v4l2_queryctrl qc; | |
100 | u16 reg; | |
101 | u16 start_bit; | |
102 | } video_control[] = { | |
103 | { | |
104 | { | |
105 | .id = V4L2_CID_GAIN, | |
106 | .type = V4L2_CTRL_TYPE_INTEGER, | |
107 | .name = "Gain", | |
108 | .minimum = 0, | |
109 | .maximum = 63, | |
110 | .step = 1, | |
111 | }, | |
112 | .reg = TCM825X_AG, | |
113 | .start_bit = 0, | |
114 | }, | |
115 | { | |
116 | { | |
117 | .id = V4L2_CID_RED_BALANCE, | |
118 | .type = V4L2_CTRL_TYPE_INTEGER, | |
119 | .name = "Red Balance", | |
120 | .minimum = 0, | |
121 | .maximum = 255, | |
122 | .step = 1, | |
123 | }, | |
124 | .reg = TCM825X_MRG, | |
125 | .start_bit = 0, | |
126 | }, | |
127 | { | |
128 | { | |
129 | .id = V4L2_CID_BLUE_BALANCE, | |
130 | .type = V4L2_CTRL_TYPE_INTEGER, | |
131 | .name = "Blue Balance", | |
132 | .minimum = 0, | |
133 | .maximum = 255, | |
134 | .step = 1, | |
135 | }, | |
136 | .reg = TCM825X_MBG, | |
137 | .start_bit = 0, | |
138 | }, | |
139 | { | |
140 | { | |
141 | .id = V4L2_CID_AUTO_WHITE_BALANCE, | |
142 | .type = V4L2_CTRL_TYPE_BOOLEAN, | |
143 | .name = "Auto White Balance", | |
144 | .minimum = 0, | |
145 | .maximum = 1, | |
146 | .step = 0, | |
147 | }, | |
148 | .reg = TCM825X_AWBSW, | |
149 | .start_bit = 7, | |
150 | }, | |
151 | { | |
152 | { | |
153 | .id = V4L2_CID_EXPOSURE, | |
154 | .type = V4L2_CTRL_TYPE_INTEGER, | |
155 | .name = "Exposure Time", | |
156 | .minimum = 0, | |
157 | .maximum = 0x1fff, | |
158 | .step = 1, | |
159 | }, | |
160 | .reg = TCM825X_ESRSPD_U, | |
161 | .start_bit = 0, | |
162 | }, | |
163 | { | |
164 | { | |
165 | .id = V4L2_CID_HFLIP, | |
166 | .type = V4L2_CTRL_TYPE_BOOLEAN, | |
167 | .name = "Mirror Image", | |
168 | .minimum = 0, | |
169 | .maximum = 1, | |
170 | .step = 0, | |
171 | }, | |
172 | .reg = TCM825X_H_INV, | |
173 | .start_bit = 6, | |
174 | }, | |
175 | { | |
176 | { | |
177 | .id = V4L2_CID_VFLIP, | |
178 | .type = V4L2_CTRL_TYPE_BOOLEAN, | |
179 | .name = "Vertical Flip", | |
180 | .minimum = 0, | |
181 | .maximum = 1, | |
182 | .step = 0, | |
183 | }, | |
184 | .reg = TCM825X_V_INV, | |
185 | .start_bit = 7, | |
186 | }, | |
187 | /* Private controls */ | |
188 | { | |
189 | { | |
190 | .id = V4L2_CID_ALC, | |
191 | .type = V4L2_CTRL_TYPE_BOOLEAN, | |
192 | .name = "Auto Luminance Control", | |
193 | .minimum = 0, | |
194 | .maximum = 1, | |
195 | .step = 0, | |
196 | }, | |
197 | .reg = TCM825X_ALCSW, | |
198 | .start_bit = 7, | |
199 | }, | |
200 | { | |
201 | { | |
202 | .id = V4L2_CID_H_EDGE_EN, | |
203 | .type = V4L2_CTRL_TYPE_INTEGER, | |
204 | .name = "Horizontal Edge Enhancement", | |
205 | .minimum = 0, | |
206 | .maximum = 0xff, | |
207 | .step = 1, | |
208 | }, | |
209 | .reg = TCM825X_HDTG, | |
210 | .start_bit = 0, | |
211 | }, | |
212 | { | |
213 | { | |
214 | .id = V4L2_CID_V_EDGE_EN, | |
215 | .type = V4L2_CTRL_TYPE_INTEGER, | |
216 | .name = "Vertical Edge Enhancement", | |
217 | .minimum = 0, | |
218 | .maximum = 0xff, | |
219 | .step = 1, | |
220 | }, | |
221 | .reg = TCM825X_VDTG, | |
222 | .start_bit = 0, | |
223 | }, | |
224 | { | |
225 | { | |
226 | .id = V4L2_CID_LENS, | |
227 | .type = V4L2_CTRL_TYPE_INTEGER, | |
228 | .name = "Lens Shading Compensation", | |
229 | .minimum = 0, | |
230 | .maximum = 0x3f, | |
231 | .step = 1, | |
232 | }, | |
233 | .reg = TCM825X_LENS, | |
234 | .start_bit = 0, | |
235 | }, | |
236 | { | |
237 | { | |
238 | .id = V4L2_CID_MAX_EXPOSURE_TIME, | |
239 | .type = V4L2_CTRL_TYPE_INTEGER, | |
240 | .name = "Maximum Exposure Time", | |
241 | .minimum = 0, | |
242 | .maximum = 0x3, | |
243 | .step = 1, | |
244 | }, | |
245 | .reg = TCM825X_ESRLIM, | |
246 | .start_bit = 5, | |
247 | }, | |
248 | }; | |
249 | ||
250 | ||
e23b2907 | 251 | static const struct tcm825x_reg *tcm825x_siz_reg[NUM_IMAGE_SIZES] = |
a5e90862 SA |
252 | { &subqcif, &qqvga, &qcif, &qvga, &cif, &vga }; |
253 | ||
e23b2907 | 254 | static const struct tcm825x_reg *tcm825x_fmt_reg[NUM_PIXEL_FORMATS] = |
a5e90862 SA |
255 | { &yuv422, &rgb565 }; |
256 | ||
257 | /* | |
258 | * Read a value from a register in an TCM825X sensor device. The value is | |
259 | * returned in 'val'. | |
260 | * Returns zero if successful, or non-zero otherwise. | |
261 | */ | |
262 | static int tcm825x_read_reg(struct i2c_client *client, int reg) | |
263 | { | |
264 | int err; | |
265 | struct i2c_msg msg[2]; | |
266 | u8 reg_buf, data_buf = 0; | |
267 | ||
268 | if (!client->adapter) | |
269 | return -ENODEV; | |
270 | ||
271 | msg[0].addr = client->addr; | |
272 | msg[0].flags = 0; | |
273 | msg[0].len = 1; | |
274 | msg[0].buf = ®_buf; | |
275 | msg[1].addr = client->addr; | |
276 | msg[1].flags = I2C_M_RD; | |
277 | msg[1].len = 1; | |
278 | msg[1].buf = &data_buf; | |
279 | ||
280 | reg_buf = reg; | |
281 | ||
282 | err = i2c_transfer(client->adapter, msg, 2); | |
283 | if (err < 0) | |
284 | return err; | |
285 | return data_buf; | |
286 | } | |
287 | ||
288 | /* | |
289 | * Write a value to a register in an TCM825X sensor device. | |
290 | * Returns zero if successful, or non-zero otherwise. | |
291 | */ | |
292 | static int tcm825x_write_reg(struct i2c_client *client, u8 reg, u8 val) | |
293 | { | |
294 | int err; | |
295 | struct i2c_msg msg[1]; | |
296 | unsigned char data[2]; | |
297 | ||
298 | if (!client->adapter) | |
299 | return -ENODEV; | |
300 | ||
301 | msg->addr = client->addr; | |
302 | msg->flags = 0; | |
303 | msg->len = 2; | |
304 | msg->buf = data; | |
305 | data[0] = reg; | |
306 | data[1] = val; | |
307 | err = i2c_transfer(client->adapter, msg, 1); | |
308 | if (err >= 0) | |
309 | return 0; | |
310 | return err; | |
311 | } | |
312 | ||
313 | static int __tcm825x_write_reg_mask(struct i2c_client *client, | |
314 | u8 reg, u8 val, u8 mask) | |
315 | { | |
316 | int rc; | |
317 | ||
318 | /* need to do read - modify - write */ | |
319 | rc = tcm825x_read_reg(client, reg); | |
320 | if (rc < 0) | |
321 | return rc; | |
322 | ||
323 | rc &= (~mask); /* Clear the masked bits */ | |
324 | val &= mask; /* Enforce mask on value */ | |
325 | val |= rc; | |
326 | ||
327 | /* write the new value to the register */ | |
328 | rc = tcm825x_write_reg(client, reg, val); | |
329 | if (rc) | |
330 | return rc; | |
331 | ||
332 | return 0; | |
333 | } | |
334 | ||
335 | #define tcm825x_write_reg_mask(client, regmask, val) \ | |
336 | __tcm825x_write_reg_mask(client, TCM825X_ADDR((regmask)), val, \ | |
337 | TCM825X_MASK((regmask))) | |
338 | ||
339 | ||
340 | /* | |
341 | * Initialize a list of TCM825X registers. | |
342 | * The list of registers is terminated by the pair of values | |
343 | * { TCM825X_REG_TERM, TCM825X_VAL_TERM }. | |
344 | * Returns zero if successful, or non-zero otherwise. | |
345 | */ | |
346 | static int tcm825x_write_default_regs(struct i2c_client *client, | |
347 | const struct tcm825x_reg *reglist) | |
348 | { | |
349 | int err; | |
350 | const struct tcm825x_reg *next = reglist; | |
351 | ||
352 | while (!((next->reg == TCM825X_REG_TERM) | |
353 | && (next->val == TCM825X_VAL_TERM))) { | |
354 | err = tcm825x_write_reg(client, next->reg, next->val); | |
355 | if (err) { | |
356 | dev_err(&client->dev, "register writing failed\n"); | |
357 | return err; | |
358 | } | |
359 | next++; | |
360 | } | |
361 | ||
362 | return 0; | |
363 | } | |
364 | ||
365 | static struct vcontrol *find_vctrl(int id) | |
366 | { | |
367 | int i; | |
368 | ||
369 | if (id < V4L2_CID_BASE) | |
370 | return NULL; | |
371 | ||
372 | for (i = 0; i < ARRAY_SIZE(video_control); i++) | |
373 | if (video_control[i].qc.id == id) | |
374 | return &video_control[i]; | |
375 | ||
376 | return NULL; | |
377 | } | |
378 | ||
379 | /* | |
380 | * Find the best match for a requested image capture size. The best match | |
381 | * is chosen as the nearest match that has the same number or fewer pixels | |
382 | * as the requested size, or the smallest image size if the requested size | |
383 | * has fewer pixels than the smallest image. | |
384 | */ | |
385 | static enum image_size tcm825x_find_size(struct v4l2_int_device *s, | |
386 | unsigned int width, | |
387 | unsigned int height) | |
388 | { | |
389 | enum image_size isize; | |
390 | unsigned long pixels = width * height; | |
391 | struct tcm825x_sensor *sensor = s->priv; | |
392 | ||
393 | for (isize = subQCIF; isize < VGA; isize++) { | |
394 | if (tcm825x_sizes[isize + 1].height | |
395 | * tcm825x_sizes[isize + 1].width > pixels) { | |
396 | dev_dbg(&sensor->i2c_client->dev, "size %d\n", isize); | |
397 | ||
398 | return isize; | |
399 | } | |
400 | } | |
401 | ||
402 | dev_dbg(&sensor->i2c_client->dev, "format default VGA\n"); | |
403 | ||
404 | return VGA; | |
405 | } | |
406 | ||
407 | /* | |
408 | * Configure the TCM825X for current image size, pixel format, and | |
409 | * frame period. fper is the frame period (in seconds) expressed as a | |
410 | * fraction. Returns zero if successful, or non-zero otherwise. The | |
411 | * actual frame period is returned in fper. | |
412 | */ | |
413 | static int tcm825x_configure(struct v4l2_int_device *s) | |
414 | { | |
415 | struct tcm825x_sensor *sensor = s->priv; | |
416 | struct v4l2_pix_format *pix = &sensor->pix; | |
417 | enum image_size isize = tcm825x_find_size(s, pix->width, pix->height); | |
418 | struct v4l2_fract *fper = &sensor->timeperframe; | |
419 | enum pixel_format pfmt; | |
420 | int err; | |
421 | u32 tgt_fps; | |
422 | u8 val; | |
423 | ||
424 | /* common register initialization */ | |
425 | err = tcm825x_write_default_regs( | |
426 | sensor->i2c_client, sensor->platform_data->default_regs()); | |
427 | if (err) | |
428 | return err; | |
429 | ||
430 | /* configure image size */ | |
431 | val = tcm825x_siz_reg[isize]->val; | |
432 | dev_dbg(&sensor->i2c_client->dev, | |
433 | "configuring image size %d\n", isize); | |
434 | err = tcm825x_write_reg_mask(sensor->i2c_client, | |
435 | tcm825x_siz_reg[isize]->reg, val); | |
436 | if (err) | |
437 | return err; | |
438 | ||
439 | /* configure pixel format */ | |
440 | switch (pix->pixelformat) { | |
441 | default: | |
442 | case V4L2_PIX_FMT_RGB565: | |
443 | pfmt = RGB565; | |
444 | break; | |
445 | case V4L2_PIX_FMT_UYVY: | |
446 | pfmt = YUV422; | |
447 | break; | |
448 | } | |
449 | ||
450 | dev_dbg(&sensor->i2c_client->dev, | |
451 | "configuring pixel format %d\n", pfmt); | |
452 | val = tcm825x_fmt_reg[pfmt]->val; | |
453 | ||
454 | err = tcm825x_write_reg_mask(sensor->i2c_client, | |
455 | tcm825x_fmt_reg[pfmt]->reg, val); | |
456 | if (err) | |
457 | return err; | |
458 | ||
459 | /* | |
460 | * For frame rate < 15, the FPS reg (addr 0x02, bit 7) must be | |
461 | * set. Frame rate will be halved from the normal. | |
462 | */ | |
463 | tgt_fps = fper->denominator / fper->numerator; | |
464 | if (tgt_fps <= HIGH_FPS_MODE_LOWER_LIMIT) { | |
465 | val = tcm825x_read_reg(sensor->i2c_client, 0x02); | |
466 | val |= 0x80; | |
467 | tcm825x_write_reg(sensor->i2c_client, 0x02, val); | |
468 | } | |
469 | ||
470 | return 0; | |
471 | } | |
472 | ||
a5e90862 SA |
473 | static int ioctl_queryctrl(struct v4l2_int_device *s, |
474 | struct v4l2_queryctrl *qc) | |
475 | { | |
476 | struct vcontrol *control; | |
477 | ||
478 | control = find_vctrl(qc->id); | |
479 | ||
480 | if (control == NULL) | |
481 | return -EINVAL; | |
482 | ||
483 | *qc = control->qc; | |
484 | ||
485 | return 0; | |
486 | } | |
487 | ||
488 | static int ioctl_g_ctrl(struct v4l2_int_device *s, | |
489 | struct v4l2_control *vc) | |
490 | { | |
491 | struct tcm825x_sensor *sensor = s->priv; | |
492 | struct i2c_client *client = sensor->i2c_client; | |
493 | int val, r; | |
494 | struct vcontrol *lvc; | |
495 | ||
496 | /* exposure time is special, spread accross 2 registers */ | |
497 | if (vc->id == V4L2_CID_EXPOSURE) { | |
498 | int val_lower, val_upper; | |
499 | ||
500 | val_upper = tcm825x_read_reg(client, | |
501 | TCM825X_ADDR(TCM825X_ESRSPD_U)); | |
502 | if (val_upper < 0) | |
503 | return val_upper; | |
504 | val_lower = tcm825x_read_reg(client, | |
505 | TCM825X_ADDR(TCM825X_ESRSPD_L)); | |
506 | if (val_lower < 0) | |
507 | return val_lower; | |
508 | ||
509 | vc->value = ((val_upper & 0x1f) << 8) | (val_lower); | |
510 | return 0; | |
511 | } | |
512 | ||
513 | lvc = find_vctrl(vc->id); | |
514 | if (lvc == NULL) | |
515 | return -EINVAL; | |
516 | ||
517 | r = tcm825x_read_reg(client, TCM825X_ADDR(lvc->reg)); | |
518 | if (r < 0) | |
519 | return r; | |
520 | val = r & TCM825X_MASK(lvc->reg); | |
521 | val >>= lvc->start_bit; | |
522 | ||
523 | if (val < 0) | |
524 | return val; | |
525 | ||
34cb6169 SA |
526 | if (vc->id == V4L2_CID_HFLIP || vc->id == V4L2_CID_VFLIP) |
527 | val ^= sensor->platform_data->is_upside_down(); | |
528 | ||
a5e90862 SA |
529 | vc->value = val; |
530 | return 0; | |
531 | } | |
532 | ||
533 | static int ioctl_s_ctrl(struct v4l2_int_device *s, | |
534 | struct v4l2_control *vc) | |
535 | { | |
536 | struct tcm825x_sensor *sensor = s->priv; | |
537 | struct i2c_client *client = sensor->i2c_client; | |
538 | struct vcontrol *lvc; | |
539 | int val = vc->value; | |
540 | ||
541 | /* exposure time is special, spread accross 2 registers */ | |
542 | if (vc->id == V4L2_CID_EXPOSURE) { | |
543 | int val_lower, val_upper; | |
544 | val_lower = val & TCM825X_MASK(TCM825X_ESRSPD_L); | |
545 | val_upper = (val >> 8) & TCM825X_MASK(TCM825X_ESRSPD_U); | |
546 | ||
547 | if (tcm825x_write_reg_mask(client, | |
548 | TCM825X_ESRSPD_U, val_upper)) | |
549 | return -EIO; | |
550 | ||
551 | if (tcm825x_write_reg_mask(client, | |
552 | TCM825X_ESRSPD_L, val_lower)) | |
553 | return -EIO; | |
554 | ||
555 | return 0; | |
556 | } | |
557 | ||
558 | lvc = find_vctrl(vc->id); | |
559 | if (lvc == NULL) | |
560 | return -EINVAL; | |
561 | ||
34cb6169 SA |
562 | if (vc->id == V4L2_CID_HFLIP || vc->id == V4L2_CID_VFLIP) |
563 | val ^= sensor->platform_data->is_upside_down(); | |
564 | ||
a5e90862 SA |
565 | val = val << lvc->start_bit; |
566 | if (tcm825x_write_reg_mask(client, lvc->reg, val)) | |
567 | return -EIO; | |
568 | ||
569 | return 0; | |
570 | } | |
571 | ||
572 | static int ioctl_enum_fmt_cap(struct v4l2_int_device *s, | |
573 | struct v4l2_fmtdesc *fmt) | |
574 | { | |
575 | int index = fmt->index; | |
576 | ||
577 | switch (fmt->type) { | |
578 | case V4L2_BUF_TYPE_VIDEO_CAPTURE: | |
579 | if (index >= TCM825X_NUM_CAPTURE_FORMATS) | |
580 | return -EINVAL; | |
581 | break; | |
582 | ||
583 | default: | |
584 | return -EINVAL; | |
585 | } | |
586 | ||
587 | fmt->flags = tcm825x_formats[index].flags; | |
588 | strlcpy(fmt->description, tcm825x_formats[index].description, | |
589 | sizeof(fmt->description)); | |
590 | fmt->pixelformat = tcm825x_formats[index].pixelformat; | |
591 | ||
592 | return 0; | |
593 | } | |
594 | ||
595 | static int ioctl_try_fmt_cap(struct v4l2_int_device *s, | |
596 | struct v4l2_format *f) | |
597 | { | |
598 | struct tcm825x_sensor *sensor = s->priv; | |
599 | enum image_size isize; | |
600 | int ifmt; | |
601 | struct v4l2_pix_format *pix = &f->fmt.pix; | |
602 | ||
603 | isize = tcm825x_find_size(s, pix->width, pix->height); | |
f58db959 MCC |
604 | dev_dbg(&sensor->i2c_client->dev, "isize = %d num_capture = %lu\n", |
605 | isize, (unsigned long)TCM825X_NUM_CAPTURE_FORMATS); | |
a5e90862 SA |
606 | |
607 | pix->width = tcm825x_sizes[isize].width; | |
608 | pix->height = tcm825x_sizes[isize].height; | |
609 | ||
610 | for (ifmt = 0; ifmt < TCM825X_NUM_CAPTURE_FORMATS; ifmt++) | |
611 | if (pix->pixelformat == tcm825x_formats[ifmt].pixelformat) | |
612 | break; | |
613 | ||
614 | if (ifmt == TCM825X_NUM_CAPTURE_FORMATS) | |
615 | ifmt = 0; /* Default = YUV 4:2:2 */ | |
616 | ||
617 | pix->pixelformat = tcm825x_formats[ifmt].pixelformat; | |
618 | pix->field = V4L2_FIELD_NONE; | |
619 | pix->bytesperline = pix->width * TCM825X_BYTES_PER_PIXEL; | |
620 | pix->sizeimage = pix->bytesperline * pix->height; | |
621 | pix->priv = 0; | |
622 | dev_dbg(&sensor->i2c_client->dev, "format = 0x%08x\n", | |
623 | pix->pixelformat); | |
624 | ||
625 | switch (pix->pixelformat) { | |
626 | case V4L2_PIX_FMT_UYVY: | |
627 | default: | |
628 | pix->colorspace = V4L2_COLORSPACE_JPEG; | |
629 | break; | |
630 | case V4L2_PIX_FMT_RGB565: | |
631 | pix->colorspace = V4L2_COLORSPACE_SRGB; | |
632 | break; | |
633 | } | |
634 | ||
635 | return 0; | |
636 | } | |
637 | ||
638 | static int ioctl_s_fmt_cap(struct v4l2_int_device *s, | |
639 | struct v4l2_format *f) | |
640 | { | |
641 | struct tcm825x_sensor *sensor = s->priv; | |
642 | struct v4l2_pix_format *pix = &f->fmt.pix; | |
643 | int rval; | |
644 | ||
645 | rval = ioctl_try_fmt_cap(s, f); | |
646 | if (rval) | |
647 | return rval; | |
648 | ||
649 | rval = tcm825x_configure(s); | |
650 | ||
651 | sensor->pix = *pix; | |
652 | ||
653 | return rval; | |
654 | } | |
655 | ||
656 | static int ioctl_g_fmt_cap(struct v4l2_int_device *s, | |
657 | struct v4l2_format *f) | |
658 | { | |
659 | struct tcm825x_sensor *sensor = s->priv; | |
660 | ||
661 | f->fmt.pix = sensor->pix; | |
662 | ||
663 | return 0; | |
664 | } | |
665 | ||
666 | static int ioctl_g_parm(struct v4l2_int_device *s, | |
667 | struct v4l2_streamparm *a) | |
668 | { | |
669 | struct tcm825x_sensor *sensor = s->priv; | |
670 | struct v4l2_captureparm *cparm = &a->parm.capture; | |
671 | ||
672 | if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) | |
673 | return -EINVAL; | |
674 | ||
675 | memset(a, 0, sizeof(*a)); | |
676 | a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; | |
677 | ||
678 | cparm->capability = V4L2_CAP_TIMEPERFRAME; | |
679 | cparm->timeperframe = sensor->timeperframe; | |
680 | ||
681 | return 0; | |
682 | } | |
683 | ||
684 | static int ioctl_s_parm(struct v4l2_int_device *s, | |
685 | struct v4l2_streamparm *a) | |
686 | { | |
687 | struct tcm825x_sensor *sensor = s->priv; | |
688 | struct v4l2_fract *timeperframe = &a->parm.capture.timeperframe; | |
689 | u32 tgt_fps; /* target frames per secound */ | |
690 | int rval; | |
691 | ||
692 | if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) | |
693 | return -EINVAL; | |
694 | ||
695 | if ((timeperframe->numerator == 0) | |
696 | || (timeperframe->denominator == 0)) { | |
697 | timeperframe->denominator = DEFAULT_FPS; | |
698 | timeperframe->numerator = 1; | |
699 | } | |
700 | ||
701 | tgt_fps = timeperframe->denominator / timeperframe->numerator; | |
702 | ||
703 | if (tgt_fps > MAX_FPS) { | |
704 | timeperframe->denominator = MAX_FPS; | |
705 | timeperframe->numerator = 1; | |
706 | } else if (tgt_fps < MIN_FPS) { | |
707 | timeperframe->denominator = MIN_FPS; | |
708 | timeperframe->numerator = 1; | |
709 | } | |
710 | ||
711 | sensor->timeperframe = *timeperframe; | |
712 | ||
713 | rval = tcm825x_configure(s); | |
714 | ||
715 | return rval; | |
716 | } | |
717 | ||
718 | static int ioctl_s_power(struct v4l2_int_device *s, int on) | |
719 | { | |
720 | struct tcm825x_sensor *sensor = s->priv; | |
721 | ||
722 | return sensor->platform_data->power_set(on); | |
723 | } | |
724 | ||
20609557 SA |
725 | /* |
726 | * Given the image capture format in pix, the nominal frame period in | |
727 | * timeperframe, calculate the required xclk frequency. | |
728 | * | |
729 | * TCM825X input frequency characteristics are: | |
730 | * Minimum 11.9 MHz, Typical 24.57 MHz and maximum 25/27 MHz | |
731 | */ | |
732 | ||
733 | static int ioctl_g_ifparm(struct v4l2_int_device *s, struct v4l2_ifparm *p) | |
734 | { | |
735 | struct tcm825x_sensor *sensor = s->priv; | |
736 | struct v4l2_fract *timeperframe = &sensor->timeperframe; | |
737 | u32 tgt_xclk; /* target xclk */ | |
738 | u32 tgt_fps; /* target frames per secound */ | |
739 | int rval; | |
740 | ||
741 | rval = sensor->platform_data->ifparm(p); | |
742 | if (rval) | |
743 | return rval; | |
744 | ||
745 | tgt_fps = timeperframe->denominator / timeperframe->numerator; | |
746 | ||
747 | tgt_xclk = (tgt_fps <= HIGH_FPS_MODE_LOWER_LIMIT) ? | |
748 | (2457 * tgt_fps) / MAX_HALF_FPS : | |
749 | (2457 * tgt_fps) / MAX_FPS; | |
750 | tgt_xclk *= 10000; | |
751 | ||
752 | tgt_xclk = min(tgt_xclk, (u32)TCM825X_XCLK_MAX); | |
753 | tgt_xclk = max(tgt_xclk, (u32)TCM825X_XCLK_MIN); | |
754 | ||
755 | p->u.bt656.clock_curr = tgt_xclk; | |
756 | ||
757 | return 0; | |
758 | } | |
759 | ||
a5e90862 SA |
760 | static int ioctl_g_needs_reset(struct v4l2_int_device *s, void *buf) |
761 | { | |
762 | struct tcm825x_sensor *sensor = s->priv; | |
763 | ||
764 | return sensor->platform_data->needs_reset(s, buf, &sensor->pix); | |
765 | } | |
766 | ||
767 | static int ioctl_reset(struct v4l2_int_device *s) | |
768 | { | |
769 | return -EBUSY; | |
770 | } | |
771 | ||
772 | static int ioctl_init(struct v4l2_int_device *s) | |
773 | { | |
774 | return tcm825x_configure(s); | |
775 | } | |
776 | ||
777 | static int ioctl_dev_exit(struct v4l2_int_device *s) | |
778 | { | |
779 | return 0; | |
780 | } | |
781 | ||
782 | static int ioctl_dev_init(struct v4l2_int_device *s) | |
783 | { | |
784 | struct tcm825x_sensor *sensor = s->priv; | |
785 | int r; | |
786 | ||
787 | r = tcm825x_read_reg(sensor->i2c_client, 0x01); | |
788 | if (r < 0) | |
789 | return r; | |
790 | if (r == 0) { | |
791 | dev_err(&sensor->i2c_client->dev, "device not detected\n"); | |
792 | return -EIO; | |
793 | } | |
794 | return 0; | |
795 | } | |
796 | ||
20609557 | 797 | static struct v4l2_int_ioctl_desc tcm825x_ioctl_desc[] = { |
a5e90862 | 798 | { vidioc_int_dev_init_num, |
20609557 | 799 | (v4l2_int_ioctl_func *)ioctl_dev_init }, |
a5e90862 | 800 | { vidioc_int_dev_exit_num, |
20609557 | 801 | (v4l2_int_ioctl_func *)ioctl_dev_exit }, |
a5e90862 | 802 | { vidioc_int_s_power_num, |
20609557 SA |
803 | (v4l2_int_ioctl_func *)ioctl_s_power }, |
804 | { vidioc_int_g_ifparm_num, | |
805 | (v4l2_int_ioctl_func *)ioctl_g_ifparm }, | |
a5e90862 | 806 | { vidioc_int_g_needs_reset_num, |
20609557 | 807 | (v4l2_int_ioctl_func *)ioctl_g_needs_reset }, |
a5e90862 | 808 | { vidioc_int_reset_num, |
20609557 | 809 | (v4l2_int_ioctl_func *)ioctl_reset }, |
a5e90862 | 810 | { vidioc_int_init_num, |
20609557 | 811 | (v4l2_int_ioctl_func *)ioctl_init }, |
a5e90862 | 812 | { vidioc_int_enum_fmt_cap_num, |
20609557 | 813 | (v4l2_int_ioctl_func *)ioctl_enum_fmt_cap }, |
a5e90862 | 814 | { vidioc_int_try_fmt_cap_num, |
20609557 | 815 | (v4l2_int_ioctl_func *)ioctl_try_fmt_cap }, |
a5e90862 | 816 | { vidioc_int_g_fmt_cap_num, |
20609557 | 817 | (v4l2_int_ioctl_func *)ioctl_g_fmt_cap }, |
a5e90862 | 818 | { vidioc_int_s_fmt_cap_num, |
20609557 | 819 | (v4l2_int_ioctl_func *)ioctl_s_fmt_cap }, |
a5e90862 | 820 | { vidioc_int_g_parm_num, |
20609557 | 821 | (v4l2_int_ioctl_func *)ioctl_g_parm }, |
a5e90862 | 822 | { vidioc_int_s_parm_num, |
20609557 | 823 | (v4l2_int_ioctl_func *)ioctl_s_parm }, |
a5e90862 | 824 | { vidioc_int_queryctrl_num, |
20609557 | 825 | (v4l2_int_ioctl_func *)ioctl_queryctrl }, |
a5e90862 | 826 | { vidioc_int_g_ctrl_num, |
20609557 | 827 | (v4l2_int_ioctl_func *)ioctl_g_ctrl }, |
a5e90862 | 828 | { vidioc_int_s_ctrl_num, |
20609557 | 829 | (v4l2_int_ioctl_func *)ioctl_s_ctrl }, |
a5e90862 SA |
830 | }; |
831 | ||
832 | static struct v4l2_int_slave tcm825x_slave = { | |
833 | .ioctls = tcm825x_ioctl_desc, | |
834 | .num_ioctls = ARRAY_SIZE(tcm825x_ioctl_desc), | |
835 | }; | |
836 | ||
837 | static struct tcm825x_sensor tcm825x; | |
838 | ||
839 | static struct v4l2_int_device tcm825x_int_device = { | |
840 | .module = THIS_MODULE, | |
841 | .name = TCM825X_NAME, | |
842 | .priv = &tcm825x, | |
843 | .type = v4l2_int_type_slave, | |
844 | .u = { | |
845 | .slave = &tcm825x_slave, | |
846 | }, | |
847 | }; | |
848 | ||
d2653e92 JD |
849 | static int tcm825x_probe(struct i2c_client *client, |
850 | const struct i2c_device_id *did) | |
a5e90862 SA |
851 | { |
852 | struct tcm825x_sensor *sensor = &tcm825x; | |
a5e90862 SA |
853 | |
854 | if (i2c_get_clientdata(client)) | |
855 | return -EBUSY; | |
856 | ||
857 | sensor->platform_data = client->dev.platform_data; | |
858 | ||
859 | if (sensor->platform_data == NULL | |
0ed464e1 | 860 | || !sensor->platform_data->is_okay()) |
a5e90862 SA |
861 | return -ENODEV; |
862 | ||
863 | sensor->v4l2_int_device = &tcm825x_int_device; | |
864 | ||
865 | sensor->i2c_client = client; | |
866 | i2c_set_clientdata(client, sensor); | |
867 | ||
868 | /* Make the default capture format QVGA RGB565 */ | |
869 | sensor->pix.width = tcm825x_sizes[QVGA].width; | |
870 | sensor->pix.height = tcm825x_sizes[QVGA].height; | |
871 | sensor->pix.pixelformat = V4L2_PIX_FMT_RGB565; | |
872 | ||
fbae3fb1 | 873 | return v4l2_int_device_register(sensor->v4l2_int_device); |
a5e90862 SA |
874 | } |
875 | ||
54bb501c | 876 | static int tcm825x_remove(struct i2c_client *client) |
a5e90862 SA |
877 | { |
878 | struct tcm825x_sensor *sensor = i2c_get_clientdata(client); | |
879 | ||
880 | if (!client->adapter) | |
881 | return -ENODEV; /* our client isn't attached */ | |
882 | ||
883 | v4l2_int_device_unregister(sensor->v4l2_int_device); | |
a5e90862 SA |
884 | |
885 | return 0; | |
886 | } | |
887 | ||
ae429083 JD |
888 | static const struct i2c_device_id tcm825x_id[] = { |
889 | { "tcm825x", 0 }, | |
890 | { } | |
891 | }; | |
892 | MODULE_DEVICE_TABLE(i2c, tcm825x_id); | |
893 | ||
a5e90862 | 894 | static struct i2c_driver tcm825x_i2c_driver = { |
20609557 | 895 | .driver = { |
a5e90862 SA |
896 | .name = TCM825X_NAME, |
897 | }, | |
20609557 | 898 | .probe = tcm825x_probe, |
54bb501c | 899 | .remove = tcm825x_remove, |
ae429083 | 900 | .id_table = tcm825x_id, |
a5e90862 SA |
901 | }; |
902 | ||
903 | static struct tcm825x_sensor tcm825x = { | |
904 | .timeperframe = { | |
20609557 | 905 | .numerator = 1, |
a5e90862 SA |
906 | .denominator = DEFAULT_FPS, |
907 | }, | |
908 | }; | |
909 | ||
910 | static int __init tcm825x_init(void) | |
911 | { | |
912 | int rval; | |
a5e90862 SA |
913 | |
914 | rval = i2c_add_driver(&tcm825x_i2c_driver); | |
915 | if (rval) | |
916 | printk(KERN_INFO "%s: failed registering " TCM825X_NAME "\n", | |
7e28adb2 | 917 | __func__); |
a5e90862 SA |
918 | |
919 | return rval; | |
920 | } | |
921 | ||
922 | static void __exit tcm825x_exit(void) | |
923 | { | |
924 | i2c_del_driver(&tcm825x_i2c_driver); | |
925 | } | |
926 | ||
927 | /* | |
928 | * FIXME: Menelaus isn't ready (?) at module_init stage, so use | |
929 | * late_initcall for now. | |
930 | */ | |
931 | late_initcall(tcm825x_init); | |
932 | module_exit(tcm825x_exit); | |
933 | ||
934 | MODULE_AUTHOR("Sakari Ailus <sakari.ailus@nokia.com>"); | |
935 | MODULE_DESCRIPTION("TCM825x camera sensor driver"); | |
936 | MODULE_LICENSE("GPL"); |