Commit | Line | Data |
---|---|---|
a4e137ab RK |
1 | # |
2 | # Multifunction miscellaneous devices | |
3 | # | |
4 | ||
8a0a8e8e AB |
5 | if HAS_IOMEM |
6 | menu "Multifunction device drivers" | |
b6d6454f | 7 | |
aa613de6 DB |
8 | config MFD_CORE |
9 | tristate | |
c94bb233 | 10 | select IRQ_DOMAIN |
aa613de6 DB |
11 | default n |
12 | ||
2cc50bee HZ |
13 | config MFD_88PM860X |
14 | bool "Support Marvell 88PM8606/88PM8607" | |
8d002bdc | 15 | depends on I2C=y && GENERIC_HARDIRQS |
b46a36c0 | 16 | select REGMAP_I2C |
2cc50bee HZ |
17 | select MFD_CORE |
18 | help | |
19 | This supports for Marvell 88PM8606/88PM8607 Power Management IC. | |
20 | This includes the I2C driver and the core APIs _only_, you have to | |
21 | select individual components like voltage regulators, RTC and | |
22 | battery-charger under the corresponding menus. | |
23 | ||
70c6cce0 QZ |
24 | config MFD_88PM800 |
25 | tristate "Support Marvell 88PM800" | |
26 | depends on I2C=y && GENERIC_HARDIRQS | |
27 | select REGMAP_I2C | |
28 | select REGMAP_IRQ | |
29 | select MFD_CORE | |
30 | help | |
31 | This supports for Marvell 88PM800 Power Management IC. | |
32 | This includes the I2C driver and the core APIs _only_, you have to | |
33 | select individual components like voltage regulators, RTC and | |
34 | battery-charger under the corresponding menus. | |
35 | ||
36 | config MFD_88PM805 | |
37 | tristate "Support Marvell 88PM805" | |
38 | depends on I2C=y && GENERIC_HARDIRQS | |
39 | select REGMAP_I2C | |
40 | select REGMAP_IRQ | |
41 | select MFD_CORE | |
42 | help | |
43 | This supports for Marvell 88PM805 Power Management IC. This includes | |
44 | the I2C driver and the core APIs _only_, you have to select individual | |
45 | components like codec device, headset/Mic device under the | |
46 | corresponding menus. | |
47 | ||
b6d6454f BD |
48 | config MFD_SM501 |
49 | tristate "Support for Silicon Motion SM501" | |
50 | ---help--- | |
51 | This is the core driver for the Silicon Motion SM501 multimedia | |
52 | companion chip. This device is a multifunction device which may | |
01dd2fbf ML |
53 | provide numerous interfaces including USB host controller, USB gadget, |
54 | asynchronous serial ports, audio functions, and a dual display video | |
b6d6454f BD |
55 | interface. The device may be connected by PCI or local bus with |
56 | varying functions enabled. | |
57 | ||
f61be273 BD |
58 | config MFD_SM501_GPIO |
59 | bool "Export GPIO via GPIO layer" | |
2eedd604 | 60 | depends on MFD_SM501 && GPIOLIB |
f61be273 BD |
61 | ---help--- |
62 | This option uses the gpio library layer to export the 64 GPIO | |
63 | lines on the SM501. The platform data is used to supply the | |
64 | base number for the first GPIO line to register. | |
65 | ||
fa9ff4b1 SO |
66 | config MFD_ASIC3 |
67 | bool "Support for Compaq ASIC3" | |
2eedd604 | 68 | depends on GENERIC_HARDIRQS && GPIOLIB && ARM |
9461f65a | 69 | select MFD_CORE |
fa9ff4b1 SO |
70 | ---help--- |
71 | This driver supports the ASIC3 multifunction chip found on many | |
72 | PDAs (mainly iPAQ and HTC based ones) | |
73 | ||
ca26308c MA |
74 | config MFD_DAVINCI_VOICECODEC |
75 | tristate | |
76 | select MFD_CORE | |
77 | ||
0931a4c6 DB |
78 | config MFD_DM355EVM_MSP |
79 | bool "DaVinci DM355 EVM microcontroller" | |
1819ebcf | 80 | depends on I2C=y && MACH_DAVINCI_DM355_EVM |
0931a4c6 DB |
81 | help |
82 | This driver supports the MSP430 microcontroller used on these | |
83 | boards. MSP430 firmware manages resets and power sequencing, | |
84 | inputs from buttons and the IR remote, LEDs, an RTC, and more. | |
85 | ||
03df0f62 CC |
86 | config MFD_TI_SSP |
87 | tristate "TI Sequencer Serial Port support" | |
88 | depends on ARCH_DAVINCI_TNETV107X | |
89 | select MFD_CORE | |
90 | ---help--- | |
91 | Say Y here if you want support for the Sequencer Serial Port | |
92 | in a Texas Instruments TNETV107X SoC. | |
93 | ||
94 | To compile this driver as a module, choose M here: the | |
95 | module will be called ti-ssp. | |
96 | ||
a1635b8f PZ |
97 | config HTC_EGPIO |
98 | bool "HTC EGPIO support" | |
7444a72e | 99 | depends on GENERIC_HARDIRQS && GPIOLIB && ARM |
a1635b8f PZ |
100 | help |
101 | This driver supports the CPLD egpio chip present on | |
102 | several HTC phones. It provides basic support for input | |
103 | pins, output pins, and irqs. | |
104 | ||
5dc3339a PZ |
105 | config HTC_PASIC3 |
106 | tristate "HTC PASIC3 LED/DS1WM chip support" | |
0254a8f4 | 107 | select MFD_CORE |
5dc3339a PZ |
108 | help |
109 | This core driver provides register access for the LED/DS1WM | |
110 | chips labeled "AIC2" and "AIC3", found on HTC Blueangel and | |
111 | HTC Magician devices, respectively. Actual functionality is | |
112 | handled by the leds-pasic3 and ds1wm drivers. | |
113 | ||
6048a3dd CM |
114 | config HTC_I2CPLD |
115 | bool "HTC I2C PLD chip support" | |
bef3e20c | 116 | depends on I2C=y && GPIOLIB |
6048a3dd CM |
117 | help |
118 | If you say yes here you get support for the supposed CPLD | |
119 | found on omap850 HTC devices like the HTC Wizard and HTC Herald. | |
120 | This device provides input and output GPIOs through an I2C | |
121 | interface to one or more sub-chips. | |
122 | ||
d9105c2b MV |
123 | config UCB1400_CORE |
124 | tristate "Philips UCB1400 Core driver" | |
e4831802 | 125 | depends on AC97_BUS |
5a49a540 | 126 | depends on GPIOLIB |
d9105c2b MV |
127 | help |
128 | This enables support for the Philips UCB1400 core functions. | |
129 | The UCB1400 is an AC97 audio codec. | |
130 | ||
131 | To compile this driver as a module, choose M here: the | |
132 | module will be called ucb1400_core. | |
133 | ||
16c5c023 JH |
134 | config MFD_LM3533 |
135 | tristate "LM3533 Lighting Power chip" | |
136 | depends on I2C | |
137 | select MFD_CORE | |
138 | select REGMAP_I2C | |
139 | help | |
140 | Say yes here to enable support for National Semiconductor / TI | |
141 | LM3533 Lighting Power chips. | |
142 | ||
143 | This driver provides common support for accessing the device; | |
144 | additional drivers must be enabled in order to use the LED, | |
145 | backlight or ambient-light-sensor functionality of the device. | |
146 | ||
798a8eee LW |
147 | config TPS6105X |
148 | tristate "TPS61050/61052 Boost Converters" | |
149 | depends on I2C | |
2edd3b69 | 150 | select REGULATOR |
fc498fa2 | 151 | select MFD_CORE |
2edd3b69 | 152 | select REGULATOR_FIXED_VOLTAGE |
798a8eee LW |
153 | help |
154 | This option enables a driver for the TP61050/TPS61052 | |
155 | high-power "white LED driver". This boost converter is | |
156 | sometimes used for other things than white LEDs, and | |
157 | also contains a GPIO pin. | |
158 | ||
87c13493 DB |
159 | config TPS65010 |
160 | tristate "TPS6501x Power Management chips" | |
161 | depends on I2C && GPIOLIB | |
162 | default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK | |
163 | help | |
164 | If you say yes here you get support for the TPS6501x series of | |
165 | Power Management chips. These include voltage regulators, | |
166 | lithium ion/polymer battery charging, and other features that | |
167 | are often used in portable devices like cell phones and cameras. | |
168 | ||
169 | This driver can also be built as a module. If so, the module | |
170 | will be called tps65010. | |
171 | ||
31dd6a26 TF |
172 | config TPS6507X |
173 | tristate "TPS6507x Power Management / Touch Screen chips" | |
174 | select MFD_CORE | |
175 | depends on I2C | |
176 | help | |
177 | If you say yes here you get support for the TPS6507x series of | |
178 | Power Management / Touch Screen chips. These include voltage | |
179 | regulators, lithium ion/polymer battery charging, touch screen | |
180 | and other features that are often used in portable devices. | |
181 | This driver can also be built as a module. If so, the module | |
182 | will be called tps6507x. | |
183 | ||
d48f411c AC |
184 | config MFD_TPS65217 |
185 | tristate "TPS65217 Power Management / White LED chips" | |
186 | depends on I2C | |
187 | select MFD_CORE | |
188 | select REGMAP_I2C | |
189 | help | |
190 | If you say yes here you get support for the TPS65217 series of | |
191 | Power Management / White LED chips. | |
192 | These include voltage regulators, lithium ion/polymer battery | |
193 | charger, wled and other features that are often used in portable | |
194 | devices. | |
195 | ||
196 | This driver can also be built as a module. If so, the module | |
197 | will be called tps65217. | |
198 | ||
37df003c AL |
199 | config MFD_TPS6586X |
200 | bool "TPS6586x Power Management chips" | |
201 | depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS | |
202 | select MFD_CORE | |
b4410a89 | 203 | depends on REGULATOR |
37df003c AL |
204 | help |
205 | If you say yes here you get support for the TPS6586X series of | |
206 | Power Management chips. | |
207 | This driver provides common support for accessing the device, | |
208 | additional drivers must be enabled in order to use the | |
209 | functionality of the device. | |
210 | ||
211 | This driver can also be built as a module. If so, the module | |
212 | will be called tps6586x. | |
213 | ||
54f323b1 LW |
214 | config MFD_TPS65910 |
215 | bool "TPS65910 Power Management chip" | |
216 | depends on I2C=y && GPIOLIB | |
217 | select MFD_CORE | |
dc9913a0 | 218 | select REGMAP_I2C |
21f7541d | 219 | select IRQ_DOMAIN |
54f323b1 LW |
220 | help |
221 | if you say yes here you get support for the TPS65910 series of | |
222 | Power Management chips. | |
223 | ||
36e52873 | 224 | config MFD_TPS65912 |
5608801b | 225 | bool |
36e52873 MO |
226 | depends on GPIOLIB |
227 | ||
228 | config MFD_TPS65912_I2C | |
231dd9c8 | 229 | bool "TPS65912 Power Management chip with I2C" |
36e52873 MO |
230 | select MFD_CORE |
231 | select MFD_TPS65912 | |
232 | depends on I2C=y && GPIOLIB | |
233 | help | |
234 | If you say yes here you get support for the TPS65912 series of | |
235 | PM chips with I2C interface. | |
236 | ||
237 | config MFD_TPS65912_SPI | |
238 | bool "TPS65912 Power Management chip with SPI" | |
239 | select MFD_CORE | |
240 | select MFD_TPS65912 | |
241 | depends on SPI_MASTER && GPIOLIB | |
242 | help | |
243 | If you say yes here you get support for the TPS65912 series of | |
244 | PM chips with SPI interface. | |
245 | ||
88e75cc3 DB |
246 | config MENELAUS |
247 | bool "Texas Instruments TWL92330/Menelaus PM chip" | |
088ef950 | 248 | depends on I2C=y && ARCH_OMAP2 |
88e75cc3 DB |
249 | help |
250 | If you say yes here you get support for the Texas Instruments | |
251 | TWL92330/Menelaus Power Management chip. This include voltage | |
692105b8 | 252 | regulators, Dual slot memory card transceivers, real-time clock |
88e75cc3 DB |
253 | and other features that are often used in portable devices like |
254 | cell phones and PDAs. | |
255 | ||
a603a7fa | 256 | config TWL4030_CORE |
e8deb28c | 257 | bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support" |
6252547b | 258 | depends on I2C=y && GENERIC_HARDIRQS |
280ad7fd | 259 | select IRQ_DOMAIN |
a603a7fa | 260 | help |
e8deb28c | 261 | Say yes here if you have TWL4030 / TWL6030 family chip on your board. |
a603a7fa DB |
262 | This core driver provides register access and IRQ handling |
263 | facilities, and registers devices for the various functions | |
264 | so that function-specific drivers can bind to them. | |
265 | ||
266 | These multi-function chips are found on many OMAP2 and OMAP3 | |
267 | boards, providing power management, RTC, GPIO, keypad, a | |
268 | high speed USB OTG transceiver, an audio codec (on most | |
269 | versions) and many other features. | |
270 | ||
f99c1d4f K |
271 | config TWL4030_MADC |
272 | tristate "Texas Instruments TWL4030 MADC" | |
273 | depends on TWL4030_CORE | |
274 | help | |
275 | This driver provides support for triton TWL4030-MADC. The | |
276 | driver supports both RT and SW conversion methods. | |
277 | ||
278 | This driver can be built as a module. If so it will be | |
279 | named twl4030-madc | |
280 | ||
ebf0bd36 AK |
281 | config TWL4030_POWER |
282 | bool "Support power resources on TWL4030 family chips" | |
283 | depends on TWL4030_CORE && ARM | |
284 | help | |
285 | Say yes here if you want to use the power resources on the | |
286 | TWL4030 family chips. Most of these resources are regulators, | |
287 | which have a separate driver; some are control signals, such | |
288 | as clock request handshaking. | |
289 | ||
290 | This driver uses board-specific data to initialize the resources | |
25985edc | 291 | and load scripts controlling which resources are switched off/on |
ebf0bd36 AK |
292 | or reset when a sleep, wakeup or warm reset event occurs. |
293 | ||
57fe7251 | 294 | config MFD_TWL4030_AUDIO |
0b83ddeb PU |
295 | bool |
296 | depends on TWL4030_CORE | |
297 | select MFD_CORE | |
298 | default n | |
299 | ||
31fc03df H |
300 | config TWL6030_PWM |
301 | tristate "TWL6030 PWM (Pulse Width Modulator) Support" | |
302 | depends on TWL4030_CORE | |
303 | select HAVE_PWM | |
304 | default n | |
305 | help | |
306 | Say yes here if you want support for TWL6030 PWM. | |
307 | This is used to control charging LED brightness. | |
308 | ||
f19b2823 | 309 | config TWL6040_CORE |
8eaeb939 PU |
310 | bool "Support for TWL6040 audio codec" |
311 | depends on I2C=y && GENERIC_HARDIRQS | |
f19b2823 | 312 | select MFD_CORE |
8eaeb939 | 313 | select REGMAP_I2C |
a834e810 | 314 | select IRQ_DOMAIN |
f19b2823 | 315 | default n |
8eaeb939 PU |
316 | help |
317 | Say yes here if you want support for Texas Instruments TWL6040 audio | |
318 | codec. | |
319 | This driver provides common support for accessing the device, | |
320 | additional drivers must be enabled in order to use the | |
321 | functionality of the device (audio, vibra). | |
f19b2823 | 322 | |
27e34995 RV |
323 | config MFD_STMPE |
324 | bool "Support STMicroelectronics STMPE" | |
e789995d | 325 | depends on (I2C=y || SPI_MASTER=y) && GENERIC_HARDIRQS |
27e34995 RV |
326 | select MFD_CORE |
327 | help | |
328 | Support for the STMPE family of I/O Expanders from | |
329 | STMicroelectronics. | |
330 | ||
331 | Currently supported devices are: | |
332 | ||
333 | STMPE811: GPIO, Touchscreen | |
334 | STMPE1601: GPIO, Keypad | |
335 | STMPE2401: GPIO, Keypad | |
336 | STMPE2403: GPIO, Keypad | |
337 | ||
338 | This driver provides common support for accessing the device, | |
339 | additional drivers must be enabled in order to use the functionality | |
340 | of the device. Currently available sub drivers are: | |
341 | ||
342 | GPIO: stmpe-gpio | |
343 | Keypad: stmpe-keypad | |
344 | Touchscreen: stmpe-ts | |
345 | ||
1a6e4b74 VK |
346 | menu "STMPE Interface Drivers" |
347 | depends on MFD_STMPE | |
348 | ||
349 | config STMPE_I2C | |
350 | bool "STMPE I2C Inteface" | |
eedea80f | 351 | depends on I2C=y |
1a6e4b74 VK |
352 | default y |
353 | help | |
354 | This is used to enable I2C interface of STMPE | |
e789995d VK |
355 | |
356 | config STMPE_SPI | |
357 | bool "STMPE SPI Inteface" | |
358 | depends on SPI_MASTER | |
359 | help | |
360 | This is used to enable SPI interface of STMPE | |
1a6e4b74 VK |
361 | endmenu |
362 | ||
f4e8afdc SI |
363 | config MFD_TC3589X |
364 | bool "Support Toshiba TC35892 and variants" | |
b4ecd326 RV |
365 | depends on I2C=y && GENERIC_HARDIRQS |
366 | select MFD_CORE | |
367 | help | |
f4e8afdc | 368 | Support for the Toshiba TC35892 and variants I/O Expander. |
b4ecd326 RV |
369 | |
370 | This driver provides common support for accessing the device, | |
371 | additional drivers must be enabled in order to use the | |
372 | functionality of the device. | |
373 | ||
1c2c30ac SO |
374 | config MFD_TMIO |
375 | bool | |
376 | default n | |
377 | ||
1f192015 IM |
378 | config MFD_T7L66XB |
379 | bool "Support Toshiba T7L66XB" | |
9ca68233 | 380 | depends on ARM && HAVE_CLK |
1f192015 | 381 | select MFD_CORE |
1c2c30ac | 382 | select MFD_TMIO |
1f192015 IM |
383 | help |
384 | Support for Toshiba Mobile IO Controller T7L66XB | |
385 | ||
cbdfb426 IM |
386 | config MFD_TC6387XB |
387 | bool "Support Toshiba TC6387XB" | |
9ca68233 | 388 | depends on ARM && HAVE_CLK |
cbdfb426 | 389 | select MFD_CORE |
1c2c30ac | 390 | select MFD_TMIO |
cbdfb426 IM |
391 | help |
392 | Support for Toshiba Mobile IO Controller TC6387XB | |
393 | ||
d6315949 DB |
394 | config MFD_TC6393XB |
395 | bool "Support Toshiba TC6393XB" | |
e959da10 | 396 | depends on GPIOLIB && ARM && HAVE_CLK |
f024ff10 | 397 | select MFD_CORE |
1c2c30ac | 398 | select MFD_TMIO |
d6315949 DB |
399 | help |
400 | Support for Toshiba Mobile IO Controller TC6393XB | |
401 | ||
8e2eaabf SO |
402 | config PMIC_DA903X |
403 | bool "Dialog Semiconductor DA9030/DA9034 PMIC Support" | |
404 | depends on I2C=y | |
405 | help | |
406 | Say yes here to support for Dialog Semiconductor DA9030 (a.k.a | |
407 | ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC | |
408 | usually found on PXA processors-based platforms. This includes | |
409 | the I2C driver and the core APIs _only_, you have to select | |
410 | individual components like LCD backlight, voltage regulators, | |
411 | LEDs and battery-charger under the corresponding menus. | |
a5736e0b | 412 | |
84c99db8 AJ |
413 | config PMIC_DA9052 |
414 | bool | |
415 | select MFD_CORE | |
416 | ||
cfe04478 AJ |
417 | config MFD_DA9052_SPI |
418 | bool "Support Dialog Semiconductor DA9052/53 PMIC variants with SPI" | |
419 | select REGMAP_SPI | |
420 | select REGMAP_IRQ | |
421 | select PMIC_DA9052 | |
422 | depends on SPI_MASTER=y | |
423 | help | |
424 | Support for the Dialog Semiconductor DA9052 PMIC | |
425 | when controlled using SPI. This driver provides common support | |
426 | for accessing the device, additional drivers must be enabled in | |
427 | order to use the functionality of the device. | |
428 | ||
84c99db8 AJ |
429 | config MFD_DA9052_I2C |
430 | bool "Support Dialog Semiconductor DA9052/53 PMIC variants with I2C" | |
431 | select REGMAP_I2C | |
432 | select REGMAP_IRQ | |
433 | select PMIC_DA9052 | |
434 | depends on I2C=y | |
435 | help | |
436 | Support for the Dialog Semiconductor DA9052 PMIC | |
437 | when controlled using I2C. This driver provides common support | |
438 | for accessing the device, additional drivers must be enabled in | |
439 | order to use the functionality of the device. | |
440 | ||
a5736e0b MH |
441 | config PMIC_ADP5520 |
442 | bool "Analog Devices ADP5520/01 MFD PMIC Core Support" | |
443 | depends on I2C=y | |
444 | help | |
445 | Say yes here to add support for Analog Devices AD5520 and ADP5501, | |
446 | Multifunction Power Management IC. This includes | |
447 | the I2C driver and the core APIs _only_, you have to select | |
448 | individual components like LCD backlight, LEDs, GPIOs and Kepad | |
449 | under the corresponding menus. | |
8e2eaabf | 450 | |
dae8a969 JL |
451 | config MFD_MAX77686 |
452 | bool "Maxim Semiconductor MAX77686 PMIC Support" | |
453 | depends on I2C=y && GENERIC_HARDIRQS | |
454 | select MFD_CORE | |
455 | select REGMAP_I2C | |
456 | select IRQ_DOMAIN | |
457 | help | |
458 | Say yes here to support for Maxim Semiconductor MAX77686. | |
459 | This is a Power Management IC with RTC on chip. | |
460 | This driver provides common support for accessing the device; | |
461 | additional drivers must be enabled in order to use the functionality | |
462 | of the device. | |
463 | ||
83871c00 CC |
464 | config MFD_MAX77693 |
465 | bool "Maxim Semiconductor MAX77693 PMIC Support" | |
466 | depends on I2C=y && GENERIC_HARDIRQS | |
467 | select MFD_CORE | |
29f772d4 | 468 | select REGMAP_I2C |
83871c00 CC |
469 | help |
470 | Say yes here to support for Maxim Semiconductor MAX77693. | |
471 | This is a companion Power Management IC with Flash, Haptic, Charger, | |
472 | and MUIC(Micro USB Interface Controller) controls on chip. | |
473 | This driver provides common support for accessing the device; | |
474 | additional drivers must be enabled in order to use the functionality | |
475 | of the device. | |
476 | ||
d50f8f33 | 477 | config MFD_MAX8925 |
1f1cf8f9 | 478 | bool "Maxim Semiconductor MAX8925 PMIC Support" |
8d002bdc | 479 | depends on I2C=y && GENERIC_HARDIRQS |
1ad99893 | 480 | select MFD_CORE |
d50f8f33 HZ |
481 | help |
482 | Say yes here to support for Maxim Semiconductor MAX8925. This is | |
6b2aac42 | 483 | a Power Management IC. This driver provides common support for |
d50f8f33 HZ |
484 | accessing the device, additional drivers must be enabled in order |
485 | to use the functionality of the device. | |
486 | ||
527e7e9a MH |
487 | config MFD_MAX8997 |
488 | bool "Maxim Semiconductor MAX8997/8966 PMIC Support" | |
489 | depends on I2C=y && GENERIC_HARDIRQS | |
490 | select MFD_CORE | |
b41511f7 | 491 | select IRQ_DOMAIN |
527e7e9a | 492 | help |
5a924d13 | 493 | Say yes here to support for Maxim Semiconductor MAX8997/8966. |
527e7e9a MH |
494 | This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic, |
495 | MUIC controls on chip. | |
d7e8c01a | 496 | This driver provides common support for accessing the device; |
527e7e9a MH |
497 | additional drivers must be enabled in order to use the functionality |
498 | of the device. | |
499 | ||
156f2528 | 500 | config MFD_MAX8998 |
f8539ddc | 501 | bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support" |
2c7e6f57 | 502 | depends on I2C=y && GENERIC_HARDIRQS |
156f2528 KP |
503 | select MFD_CORE |
504 | help | |
f8539ddc KP |
505 | Say yes here to support for Maxim Semiconductor MAX8998 and |
506 | National Semiconductor LP3974. This is a Power Management IC. | |
6b2aac42 | 507 | This driver provides common support for accessing the device, |
f8539ddc KP |
508 | additional drivers must be enabled in order to use the functionality |
509 | of the device. | |
156f2528 | 510 | |
66c9fbb9 SK |
511 | config MFD_SEC_CORE |
512 | bool "SAMSUNG Electronics PMIC Series Support" | |
c3d4d697 SK |
513 | depends on I2C=y && GENERIC_HARDIRQS |
514 | select MFD_CORE | |
515 | select REGMAP_I2C | |
516 | help | |
66c9fbb9 | 517 | Support for the Samsung Electronics MFD series. |
6b2aac42 | 518 | This driver provides common support for accessing the device, |
c3d4d697 SK |
519 | additional drivers must be enabled in order to use the functionality |
520 | of the device | |
521 | ||
3afbac95 | 522 | config MFD_ARIZONA |
14b5bd5c | 523 | select REGMAP |
49003a68 | 524 | bool |
3afbac95 MB |
525 | |
526 | config MFD_ARIZONA_I2C | |
527 | tristate "Support Wolfson Microelectronics Arizona platform with I2C" | |
528 | select MFD_ARIZONA | |
529 | select MFD_CORE | |
530 | select REGMAP_I2C | |
531 | depends on I2C | |
532 | help | |
533 | Support for the Wolfson Microelectronics Arizona platform audio SoC | |
534 | core functionality controlled via I2C. | |
535 | ||
536 | config MFD_ARIZONA_SPI | |
537 | tristate "Support Wolfson Microelectronics Arizona platform with SPI" | |
538 | select MFD_ARIZONA | |
539 | select MFD_CORE | |
540 | select REGMAP_SPI | |
541 | depends on SPI_MASTER | |
542 | help | |
543 | Support for the Wolfson Microelectronics Arizona platform audio SoC | |
544 | core functionality controlled via I2C. | |
545 | ||
546 | config MFD_WM5102 | |
547 | bool "Support Wolfson Microelectronics WM5102" | |
548 | depends on MFD_ARIZONA | |
549 | help | |
550 | Support for Wolfson Microelectronics WM5102 low power audio SoC | |
551 | ||
1d9f9f04 | 552 | config MFD_WM8400 |
eee0e4b4 | 553 | bool "Support Wolfson Microelectronics WM8400" |
b8380c1a | 554 | select MFD_CORE |
08b4c118 | 555 | depends on I2C=y |
2b247d06 | 556 | select REGMAP_I2C |
1d9f9f04 MB |
557 | help |
558 | Support for the Wolfson Microelecronics WM8400 PMIC and audio | |
9e5aca58 | 559 | CODEC. This driver provides common support for accessing |
1d9f9f04 MB |
560 | the device, additional drivers must be enabled in order to use |
561 | the functionality of the device. | |
562 | ||
b11062b9 | 563 | config MFD_WM831X |
e5b48684 MB |
564 | bool |
565 | depends on GENERIC_HARDIRQS | |
566 | ||
567 | config MFD_WM831X_I2C | |
568 | bool "Support Wolfson Microelectronics WM831x/2x PMICs with I2C" | |
b11062b9 | 569 | select MFD_CORE |
e5b48684 | 570 | select MFD_WM831X |
1df5981b | 571 | select REGMAP_I2C |
cd99758b | 572 | select IRQ_DOMAIN |
8d002bdc | 573 | depends on I2C=y && GENERIC_HARDIRQS |
b11062b9 | 574 | help |
e5b48684 MB |
575 | Support for the Wolfson Microelecronics WM831x and WM832x PMICs |
576 | when controlled using I2C. This driver provides common support | |
577 | for accessing the device, additional drivers must be enabled in | |
578 | order to use the functionality of the device. | |
b11062b9 | 579 | |
2aa13b9e MB |
580 | config MFD_WM831X_SPI |
581 | bool "Support Wolfson Microelectronics WM831x/2x PMICs with SPI" | |
582 | select MFD_CORE | |
583 | select MFD_WM831X | |
1df5981b | 584 | select REGMAP_SPI |
cd99758b | 585 | select IRQ_DOMAIN |
2aa13b9e MB |
586 | depends on SPI_MASTER && GENERIC_HARDIRQS |
587 | help | |
588 | Support for the Wolfson Microelecronics WM831x and WM832x PMICs | |
589 | when controlled using SPI. This driver provides common support | |
590 | for accessing the device, additional drivers must be enabled in | |
591 | order to use the functionality of the device. | |
592 | ||
89b4012b | 593 | config MFD_WM8350 |
ecf926bc | 594 | bool |
8d002bdc | 595 | depends on GENERIC_HARDIRQS |
89b4012b MB |
596 | |
597 | config MFD_WM8350_CONFIG_MODE_0 | |
598 | bool | |
599 | depends on MFD_WM8350 | |
600 | ||
601 | config MFD_WM8350_CONFIG_MODE_1 | |
602 | bool | |
603 | depends on MFD_WM8350 | |
604 | ||
605 | config MFD_WM8350_CONFIG_MODE_2 | |
606 | bool | |
607 | depends on MFD_WM8350 | |
608 | ||
609 | config MFD_WM8350_CONFIG_MODE_3 | |
610 | bool | |
611 | depends on MFD_WM8350 | |
612 | ||
ca23f8c1 MB |
613 | config MFD_WM8351_CONFIG_MODE_0 |
614 | bool | |
615 | depends on MFD_WM8350 | |
616 | ||
617 | config MFD_WM8351_CONFIG_MODE_1 | |
618 | bool | |
619 | depends on MFD_WM8350 | |
620 | ||
621 | config MFD_WM8351_CONFIG_MODE_2 | |
622 | bool | |
623 | depends on MFD_WM8350 | |
624 | ||
625 | config MFD_WM8351_CONFIG_MODE_3 | |
626 | bool | |
627 | depends on MFD_WM8350 | |
628 | ||
96920630 MB |
629 | config MFD_WM8352_CONFIG_MODE_0 |
630 | bool | |
631 | depends on MFD_WM8350 | |
632 | ||
633 | config MFD_WM8352_CONFIG_MODE_1 | |
634 | bool | |
635 | depends on MFD_WM8350 | |
636 | ||
637 | config MFD_WM8352_CONFIG_MODE_2 | |
638 | bool | |
639 | depends on MFD_WM8350 | |
640 | ||
641 | config MFD_WM8352_CONFIG_MODE_3 | |
642 | bool | |
643 | depends on MFD_WM8350 | |
644 | ||
c661a0b9 | 645 | config MFD_WM8350_I2C |
ecf926bc | 646 | bool "Support Wolfson Microelectronics WM8350 with I2C" |
c661a0b9 | 647 | select MFD_WM8350 |
8d002bdc | 648 | depends on I2C=y && GENERIC_HARDIRQS |
c661a0b9 MB |
649 | help |
650 | The WM8350 is an integrated audio and power management | |
651 | subsystem with watchdog and RTC functionality for embedded | |
652 | systems. This option enables core support for the WM8350 with | |
653 | I2C as the control interface. Additional options must be | |
654 | selected to enable support for the functionality of the chip. | |
655 | ||
9e501086 | 656 | config MFD_WM8994 |
c9fbf7e0 | 657 | bool "Support Wolfson Microelectronics WM8994" |
9e501086 | 658 | select MFD_CORE |
d6c645fc | 659 | select REGMAP_I2C |
8ab30691 | 660 | select REGMAP_IRQ |
c9fbf7e0 | 661 | depends on I2C=y && GENERIC_HARDIRQS |
9e501086 MB |
662 | help |
663 | The WM8994 is a highly integrated hi-fi CODEC designed for | |
664 | smartphone applicatiosn. As well as audio functionality it | |
665 | has on board GPIO and regulator functionality which is | |
666 | supported via the relevant subsystems. This driver provides | |
667 | core support for the WM8994, in order to use the actual | |
668 | functionaltiy of the device other drivers must be enabled. | |
669 | ||
f52046b1 BR |
670 | config MFD_PCF50633 |
671 | tristate "Support for NXP PCF50633" | |
672 | depends on I2C | |
6e3ad118 | 673 | select REGMAP_I2C |
f52046b1 BR |
674 | help |
675 | Say yes here if you have NXP PCF50633 chip on your board. | |
676 | This core driver provides register access and IRQ handling | |
677 | facilities, and registers devices for the various functions | |
678 | so that function-specific drivers can bind to them. | |
679 | ||
1305134e AL |
680 | config PCF50633_ADC |
681 | tristate "Support for NXP PCF50633 ADC" | |
682 | depends on MFD_PCF50633 | |
683 | help | |
684 | Say yes here if you want to include support for ADC in the | |
685 | NXP PCF50633 chip. | |
686 | ||
687 | config PCF50633_GPIO | |
688 | tristate "Support for NXP PCF50633 GPIO" | |
689 | depends on MFD_PCF50633 | |
690 | help | |
691 | Say yes here if you want to include support GPIO for pins on | |
692 | the PCF50633 chip. | |
693 | ||
8238addc | 694 | config MFD_MC13783 |
8e005935 UKK |
695 | tristate |
696 | ||
697 | config MFD_MC13XXX | |
1cb3642a | 698 | tristate |
df3df646 | 699 | depends on SPI_MASTER || I2C |
8238addc | 700 | select MFD_CORE |
8e005935 | 701 | select MFD_MC13783 |
8238addc | 702 | help |
a0c7c1d4 MR |
703 | Enable support for the Freescale MC13783 and MC13892 PMICs. |
704 | This driver provides common support for accessing the device, | |
8238addc SH |
705 | additional drivers must be enabled in order to use the |
706 | functionality of the device. | |
707 | ||
a0c7c1d4 | 708 | config MFD_MC13XXX_SPI |
1cb3642a MB |
709 | tristate "Freescale MC13783 and MC13892 SPI interface" |
710 | depends on SPI_MASTER | |
a0c7c1d4 | 711 | select REGMAP_SPI |
1cb3642a | 712 | select MFD_MC13XXX |
a0c7c1d4 MR |
713 | help |
714 | Select this if your MC13xxx is connected via an SPI bus. | |
715 | ||
df3df646 | 716 | config MFD_MC13XXX_I2C |
1cb3642a MB |
717 | tristate "Freescale MC13892 I2C interface" |
718 | depends on I2C | |
df3df646 | 719 | select REGMAP_I2C |
1cb3642a | 720 | select MFD_MC13XXX |
df3df646 MR |
721 | help |
722 | Select this if your MC13xxx is connected via an I2C bus. | |
723 | ||
fa661258 MW |
724 | config ABX500_CORE |
725 | bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions" | |
47c16975 | 726 | default y if ARCH_U300 || ARCH_U8500 |
fa661258 MW |
727 | help |
728 | Say yes here if you have the ABX500 Mixed Signal IC family | |
729 | chips. This core driver expose register access functions. | |
730 | Functionality specific drivers using these functions can | |
731 | remain unchanged when IC changes. Binding of the functions to | |
732 | actual register access is done by the IC core driver. | |
733 | ||
14fa5691 | 734 | config AB3100_CORE |
2071db48 | 735 | bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions" |
fa661258 | 736 | depends on I2C=y && ABX500_CORE |
8c96aefb | 737 | select MFD_CORE |
14fa5691 LW |
738 | default y if ARCH_U300 |
739 | help | |
740 | Select this to enable the AB3100 Mixed Signal IC core | |
741 | functionality. This connects to a AB3100 on the I2C bus | |
742 | and expose a number of symbols needed for dependent devices | |
743 | to read and write registers and subscribe to events from | |
744 | this multi-functional IC. This is needed to use other features | |
745 | of the AB3100 such as battery-backed RTC, charging control, | |
746 | LEDs, vibrator, system power and temperature, power management | |
747 | and ALSA sound. | |
748 | ||
12992dd8 LW |
749 | config AB3100_OTP |
750 | tristate "ST-Ericsson AB3100 OTP functions" | |
751 | depends on AB3100_CORE | |
752 | default y if AB3100_CORE | |
753 | help | |
754 | Select this to enable the AB3100 Mixed Signal IC OTP (one-time | |
755 | programmable memory) support. This exposes a sysfs file to read | |
756 | out OTP values. | |
757 | ||
13a09f93 DR |
758 | config EZX_PCAP |
759 | bool "PCAP Support" | |
760 | depends on GENERIC_HARDIRQS && SPI_MASTER | |
761 | help | |
762 | This enables the PCAP ASIC present on EZX Phones. This is | |
763 | needed for MMC, TouchScreen, Sound, USB, etc.. | |
764 | ||
62579266 RV |
765 | config AB8500_CORE |
766 | bool "ST-Ericsson AB8500 Mixed Signal Power Management chip" | |
21f082a6 | 767 | depends on GENERIC_HARDIRQS && ABX500_CORE && MFD_DB8500_PRCMU |
62579266 | 768 | select MFD_CORE |
06e589ef | 769 | select IRQ_DOMAIN |
0c41839e | 770 | help |
62579266 | 771 | Select this option to enable access to AB8500 power management |
6680d940 SI |
772 | chip. This connects to U8500 either on the SSP/SPI bus (deprecated |
773 | since hardware version v1.0) or the I2C bus via PRCMU. It also adds | |
774 | the irq_chip parts for handling the Mixed Signal chip events. | |
0c41839e SK |
775 | This chip embeds various other multimedia funtionalities as well. |
776 | ||
5814fc35 MW |
777 | config AB8500_DEBUG |
778 | bool "Enable debug info via debugfs" | |
779 | depends on AB8500_CORE && DEBUG_FS | |
780 | default y if DEBUG_FS | |
781 | help | |
782 | Select this option if you want debug information using the debug | |
783 | filesystem, debugfs. | |
dae2db30 AM |
784 | |
785 | config AB8500_GPADC | |
786 | bool "AB8500 GPADC driver" | |
787 | depends on AB8500_CORE && REGULATOR_AB8500 | |
788 | default y | |
789 | help | |
790 | AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage | |
5814fc35 | 791 | |
650c2a21 LW |
792 | config MFD_DB8500_PRCMU |
793 | bool "ST-Ericsson DB8500 Power Reset Control Management Unit" | |
794 | depends on UX500_SOC_DB8500 | |
795 | select MFD_CORE | |
796 | help | |
797 | Select this option to enable support for the DB8500 Power Reset | |
798 | and Control Management Unit. This is basically an autonomous | |
799 | system controller running an XP70 microprocessor, which is accessed | |
800 | through a register map. | |
801 | ||
f71e1afd AS |
802 | config MFD_CS5535 |
803 | tristate "Support for CS5535 and CS5536 southbridge core functions" | |
804 | select MFD_CORE | |
15b7cf14 | 805 | depends on PCI && X86 |
f71e1afd AS |
806 | ---help--- |
807 | This is the core driver for CS5535/CS5536 MFD functions. This is | |
808 | necessary for using the board's GPIO and MFGPT functionality. | |
809 | ||
8edbede9 RR |
810 | config MFD_TIMBERDALE |
811 | tristate "Support for the Timberdale FPGA" | |
812 | select MFD_CORE | |
546e29b6 | 813 | depends on PCI && GPIOLIB |
8edbede9 RR |
814 | ---help--- |
815 | This is the core driver for the timberdale FPGA. This device is a | |
816 | multifunction device which exposes numerous platform devices. | |
817 | ||
818 | The timberdale FPGA can be found on the Intel Atom development board | |
819 | for in-vehicle infontainment, called Russellville. | |
e82c60ae DT |
820 | |
821 | config LPC_SCH | |
822 | tristate "Intel SCH LPC" | |
823 | depends on PCI | |
824 | select MFD_CORE | |
825 | help | |
826 | LPC bridge function of the Intel SCH provides support for | |
827 | System Management Bus and General Purpose I/O. | |
828 | ||
4630b130 AS |
829 | config LPC_ICH |
830 | tristate "Intel ICH LPC" | |
831 | depends on PCI | |
832 | select MFD_CORE | |
833 | help | |
834 | The LPC bridge function of the Intel ICH provides support for | |
835 | many functional units. This driver provides needed support for | |
887c8ec7 AS |
836 | other drivers to control these functions, currently GPIO and |
837 | watchdog. | |
4630b130 | 838 | |
e090d506 FF |
839 | config MFD_RDC321X |
840 | tristate "Support for RDC-R321x southbridge" | |
841 | select MFD_CORE | |
842 | depends on PCI | |
843 | help | |
844 | Say yes here if you want to have support for the RDC R-321x SoC | |
845 | southbridge which provides access to GPIOs and Watchdog using the | |
846 | southbridge PCI device configuration space. | |
847 | ||
bd358132 IS |
848 | config MFD_JANZ_CMODIO |
849 | tristate "Support for Janz CMOD-IO PCI MODULbus Carrier Board" | |
850 | select MFD_CORE | |
851 | depends on PCI | |
852 | help | |
853 | This is the core driver for the Janz CMOD-IO PCI MODULbus | |
854 | carrier board. This device is a PCI to MODULbus bridge which may | |
855 | host many different types of MODULbus daughterboards, including | |
856 | CAN and GPIO controllers. | |
857 | ||
91f4debf | 858 | config MFD_JZ4740_ADC |
914e6d4e | 859 | bool "Support for the JZ4740 SoC ADC core" |
91f4debf | 860 | select MFD_CORE |
914e6d4e | 861 | select GENERIC_IRQ_CHIP |
91f4debf LPC |
862 | depends on MACH_JZ4740 |
863 | help | |
864 | Say yes here if you want support for the ADC unit in the JZ4740 SoC. | |
865 | This driver is necessary for jz4740-battery and jz4740-hwmon driver. | |
866 | ||
375fc77b DD |
867 | config MFD_VX855 |
868 | tristate "Support for VIA VX855/VX875 integrated south bridge" | |
869 | depends on PCI | |
870 | select MFD_CORE | |
871 | help | |
872 | Say yes here to enable support for various functions of the | |
873 | VIA VX855/VX875 south bridge. You will need to enable the vx855_spi | |
874 | and/or vx855_gpio drivers for this to do anything useful. | |
875 | ||
383268a8 | 876 | config MFD_WL1273_CORE |
94fd5b74 | 877 | tristate "Support for TI WL1273 FM radio." |
383268a8 MA |
878 | depends on I2C |
879 | select MFD_CORE | |
880 | default n | |
881 | help | |
882 | This is the core driver for the TI WL1273 FM radio. This MFD | |
883 | driver connects the radio-wl1273 V4L2 module and the wl1273 | |
884 | audio codec. | |
885 | ||
17cdd29d KM |
886 | config MFD_OMAP_USB_HOST |
887 | bool "Support OMAP USBHS core driver" | |
888 | depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3 | |
889 | default y | |
890 | help | |
891 | This is the core driver for the OAMP EHCI and OHCI drivers. | |
892 | This MFD driver does the required setup functionalities for | |
893 | OMAP USB Host drivers. | |
894 | ||
cbdb53e1 AD |
895 | config MFD_PM8XXX |
896 | tristate | |
897 | ||
898 | config MFD_PM8921_CORE | |
899 | tristate "Qualcomm PM8921 PMIC chip" | |
900 | depends on MSM_SSBI | |
901 | select MFD_CORE | |
902 | select MFD_PM8XXX | |
903 | help | |
904 | If you say yes to this option, support will be included for the | |
905 | built-in PM8921 PMIC chip. | |
906 | ||
907 | This is required if your board has a PM8921 and uses its features, | |
908 | such as: MPPs, GPIOs, regulators, interrupts, and PWM. | |
909 | ||
910 | Say M here if you want to include support for PM8921 chip as a module. | |
911 | This will build a module called "pm8921-core". | |
912 | ||
c013f0a5 AD |
913 | config MFD_PM8XXX_IRQ |
914 | bool "Support for Qualcomm PM8xxx IRQ features" | |
915 | depends on MFD_PM8XXX | |
916 | default y if MFD_PM8XXX | |
917 | help | |
918 | This is the IRQ driver for Qualcomm PM 8xxx PMIC chips. | |
919 | ||
920 | This is required to use certain other PM 8xxx features, such as GPIO | |
921 | and MPP. | |
922 | ||
8509e142 AL |
923 | config TPS65911_COMPARATOR |
924 | tristate | |
925 | ||
3c33be06 VB |
926 | config MFD_TPS65090 |
927 | bool "TPS65090 Power Management chips" | |
928 | depends on I2C=y && GENERIC_HARDIRQS | |
929 | select MFD_CORE | |
930 | select REGMAP_I2C | |
931 | help | |
932 | If you say yes here you get support for the TPS65090 series of | |
933 | Power Management chips. | |
934 | This driver provides common support for accessing the device, | |
935 | additional drivers must be enabled in order to use the | |
936 | functionality of the device. | |
937 | ||
09d6292b JP |
938 | config MFD_AAT2870_CORE |
939 | bool "Support for the AnalogicTech AAT2870" | |
940 | select MFD_CORE | |
941 | depends on I2C=y && GPIOLIB | |
942 | help | |
943 | If you say yes here you get support for the AAT2870. | |
944 | This driver provides common support for accessing the device, | |
945 | additional drivers must be enabled in order to use the | |
946 | functionality of the device. | |
947 | ||
1f5a371c MW |
948 | config MFD_INTEL_MSIC |
949 | bool "Support for Intel MSIC" | |
950 | depends on INTEL_SCU_IPC | |
951 | select MFD_CORE | |
952 | help | |
953 | Select this option to enable access to Intel MSIC (Avatele | |
954 | Passage) chip. This chip embeds audio, battery, GPIO, etc. | |
955 | devices used in Intel Medfield platforms. | |
956 | ||
1b1247dd LD |
957 | config MFD_RC5T583 |
958 | bool "Ricoh RC5T583 Power Management system device" | |
5364d0b8 | 959 | depends on I2C=y && GENERIC_HARDIRQS |
1b1247dd LD |
960 | select MFD_CORE |
961 | select REGMAP_I2C | |
962 | help | |
963 | Select this option to get support for the RICOH583 Power | |
964 | Management system device. | |
965 | This driver provides common support for accessing the device | |
966 | through i2c interface. The device supports multiple sub-devices | |
967 | like GPIO, interrupts, RTC, LDO and DCDC regulators, onkey. | |
968 | Additional drivers must be enabled in order to use the | |
969 | different functionality of the device. | |
970 | ||
35bdd290 AR |
971 | config MFD_STA2X11 |
972 | bool "STA2X11 multi function device support" | |
973 | depends on STA2X11 | |
974 | select MFD_CORE | |
975 | ||
75060a1d YCLP |
976 | config MFD_ANATOP |
977 | bool "Support for Freescale i.MX on-chip ANATOP controller" | |
978 | depends on SOC_IMX6Q | |
979 | help | |
980 | Select this option to enable Freescale i.MX on-chip ANATOP | |
981 | MFD controller. This controller embeds regulator and | |
982 | thermal devices for Freescale i.MX platforms. | |
983 | ||
c948ef3a GG |
984 | config MFD_PALMAS |
985 | bool "Support for the TI Palmas series chips" | |
986 | select MFD_CORE | |
987 | select REGMAP_I2C | |
988 | select REGMAP_IRQ | |
989 | depends on I2C=y | |
990 | help | |
991 | If you say yes here you get support for the Palmas | |
992 | series of PMIC chips from Texas Instruments. | |
993 | ||
8a0a8e8e AB |
994 | endmenu |
995 | endif | |
b6d6454f | 996 | |
a4e137ab | 997 | menu "Multimedia Capabilities Port drivers" |
f751d50f | 998 | depends on ARCH_SA1100 |
a4e137ab RK |
999 | |
1000 | config MCP | |
1001 | tristate | |
1002 | ||
5e742ad6 RK |
1003 | # Interface drivers |
1004 | config MCP_SA11X0 | |
1005 | tristate "Support SA11x0 MCP interface" | |
1006 | depends on ARCH_SA1100 | |
1007 | select MCP | |
1008 | ||
05c45ca9 RK |
1009 | # Chip drivers |
1010 | config MCP_UCB1200 | |
a3364409 RK |
1011 | bool "Support for UCB1200 / UCB1300" |
1012 | depends on MCP_SA11X0 | |
1013 | select MCP | |
05c45ca9 | 1014 | |
acb45439 RK |
1015 | config MCP_UCB1200_TS |
1016 | tristate "Touchscreen interface support" | |
1017 | depends on MCP_UCB1200 && INPUT | |
1018 | ||
a4e137ab | 1019 | endmenu |