Commit | Line | Data |
---|---|---|
a4e137ab RK |
1 | # |
2 | # Multifunction miscellaneous devices | |
3 | # | |
4 | ||
38270644 RD |
5 | menuconfig MFD_SUPPORT |
6 | bool "Multifunction device drivers" | |
e25df120 | 7 | depends on HAS_IOMEM |
38270644 RD |
8 | default y |
9 | help | |
15742c8a SO |
10 | Multifunction devices embed several functions (e.g. GPIOs, |
11 | touchscreens, keyboards, current regulators, power management chips, | |
12 | etc...) in one single integrated circuit. They usually talk to the | |
13 | main CPU through one or more IRQ lines and low speed data busses (SPI, | |
14 | I2C, etc..). They appear as one single device to the main system | |
15 | through the data bus and the MFD framework allows for sub devices | |
16 | (a.k.a. functions) to appear as discrete platform devices. | |
17 | MFDs are typically found on embedded platforms. | |
18 | ||
19 | This option alone does not add any kernel code. | |
38270644 RD |
20 | |
21 | if MFD_SUPPORT | |
b6d6454f | 22 | |
aa613de6 DB |
23 | config MFD_CORE |
24 | tristate | |
25 | default n | |
26 | ||
2cc50bee HZ |
27 | config MFD_88PM860X |
28 | bool "Support Marvell 88PM8606/88PM8607" | |
8d002bdc | 29 | depends on I2C=y && GENERIC_HARDIRQS |
2cc50bee HZ |
30 | select MFD_CORE |
31 | help | |
32 | This supports for Marvell 88PM8606/88PM8607 Power Management IC. | |
33 | This includes the I2C driver and the core APIs _only_, you have to | |
34 | select individual components like voltage regulators, RTC and | |
35 | battery-charger under the corresponding menus. | |
36 | ||
b6d6454f BD |
37 | config MFD_SM501 |
38 | tristate "Support for Silicon Motion SM501" | |
39 | ---help--- | |
40 | This is the core driver for the Silicon Motion SM501 multimedia | |
41 | companion chip. This device is a multifunction device which may | |
01dd2fbf ML |
42 | provide numerous interfaces including USB host controller, USB gadget, |
43 | asynchronous serial ports, audio functions, and a dual display video | |
b6d6454f BD |
44 | interface. The device may be connected by PCI or local bus with |
45 | varying functions enabled. | |
46 | ||
f61be273 BD |
47 | config MFD_SM501_GPIO |
48 | bool "Export GPIO via GPIO layer" | |
2eedd604 | 49 | depends on MFD_SM501 && GPIOLIB |
f61be273 BD |
50 | ---help--- |
51 | This option uses the gpio library layer to export the 64 GPIO | |
52 | lines on the SM501. The platform data is used to supply the | |
53 | base number for the first GPIO line to register. | |
54 | ||
fa9ff4b1 SO |
55 | config MFD_ASIC3 |
56 | bool "Support for Compaq ASIC3" | |
2eedd604 | 57 | depends on GENERIC_HARDIRQS && GPIOLIB && ARM |
9461f65a | 58 | select MFD_CORE |
fa9ff4b1 SO |
59 | ---help--- |
60 | This driver supports the ASIC3 multifunction chip found on many | |
61 | PDAs (mainly iPAQ and HTC based ones) | |
62 | ||
a87d5638 MD |
63 | config MFD_SH_MOBILE_SDHI |
64 | bool "Support for SuperH Mobile SDHI" | |
3d8ca8c0 | 65 | depends on SUPERH || ARCH_SHMOBILE |
a87d5638 | 66 | select MFD_CORE |
311f3ac7 | 67 | select TMIO_MMC_DMA |
a87d5638 MD |
68 | ---help--- |
69 | This driver supports the SDHI hardware block found in many | |
70 | SuperH Mobile SoCs. | |
71 | ||
ca26308c MA |
72 | config MFD_DAVINCI_VOICECODEC |
73 | tristate | |
74 | select MFD_CORE | |
75 | ||
0931a4c6 DB |
76 | config MFD_DM355EVM_MSP |
77 | bool "DaVinci DM355 EVM microcontroller" | |
78 | depends on I2C && MACH_DAVINCI_DM355_EVM | |
79 | help | |
80 | This driver supports the MSP430 microcontroller used on these | |
81 | boards. MSP430 firmware manages resets and power sequencing, | |
82 | inputs from buttons and the IR remote, LEDs, an RTC, and more. | |
83 | ||
a1635b8f PZ |
84 | config HTC_EGPIO |
85 | bool "HTC EGPIO support" | |
7444a72e | 86 | depends on GENERIC_HARDIRQS && GPIOLIB && ARM |
a1635b8f PZ |
87 | help |
88 | This driver supports the CPLD egpio chip present on | |
89 | several HTC phones. It provides basic support for input | |
90 | pins, output pins, and irqs. | |
91 | ||
5dc3339a PZ |
92 | config HTC_PASIC3 |
93 | tristate "HTC PASIC3 LED/DS1WM chip support" | |
0254a8f4 | 94 | select MFD_CORE |
5dc3339a PZ |
95 | help |
96 | This core driver provides register access for the LED/DS1WM | |
97 | chips labeled "AIC2" and "AIC3", found on HTC Blueangel and | |
98 | HTC Magician devices, respectively. Actual functionality is | |
99 | handled by the leds-pasic3 and ds1wm drivers. | |
100 | ||
6048a3dd CM |
101 | config HTC_I2CPLD |
102 | bool "HTC I2C PLD chip support" | |
bef3e20c | 103 | depends on I2C=y && GPIOLIB |
6048a3dd CM |
104 | help |
105 | If you say yes here you get support for the supposed CPLD | |
106 | found on omap850 HTC devices like the HTC Wizard and HTC Herald. | |
107 | This device provides input and output GPIOs through an I2C | |
108 | interface to one or more sub-chips. | |
109 | ||
d9105c2b MV |
110 | config UCB1400_CORE |
111 | tristate "Philips UCB1400 Core driver" | |
e4831802 | 112 | depends on AC97_BUS |
5a49a540 | 113 | depends on GPIOLIB |
d9105c2b MV |
114 | help |
115 | This enables support for the Philips UCB1400 core functions. | |
116 | The UCB1400 is an AC97 audio codec. | |
117 | ||
118 | To compile this driver as a module, choose M here: the | |
119 | module will be called ucb1400_core. | |
120 | ||
87c13493 DB |
121 | config TPS65010 |
122 | tristate "TPS6501x Power Management chips" | |
123 | depends on I2C && GPIOLIB | |
124 | default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK | |
125 | help | |
126 | If you say yes here you get support for the TPS6501x series of | |
127 | Power Management chips. These include voltage regulators, | |
128 | lithium ion/polymer battery charging, and other features that | |
129 | are often used in portable devices like cell phones and cameras. | |
130 | ||
131 | This driver can also be built as a module. If so, the module | |
132 | will be called tps65010. | |
133 | ||
31dd6a26 TF |
134 | config TPS6507X |
135 | tristate "TPS6507x Power Management / Touch Screen chips" | |
136 | select MFD_CORE | |
137 | depends on I2C | |
138 | help | |
139 | If you say yes here you get support for the TPS6507x series of | |
140 | Power Management / Touch Screen chips. These include voltage | |
141 | regulators, lithium ion/polymer battery charging, touch screen | |
142 | and other features that are often used in portable devices. | |
143 | This driver can also be built as a module. If so, the module | |
144 | will be called tps6507x. | |
145 | ||
88e75cc3 DB |
146 | config MENELAUS |
147 | bool "Texas Instruments TWL92330/Menelaus PM chip" | |
088ef950 | 148 | depends on I2C=y && ARCH_OMAP2 |
88e75cc3 DB |
149 | help |
150 | If you say yes here you get support for the Texas Instruments | |
151 | TWL92330/Menelaus Power Management chip. This include voltage | |
692105b8 | 152 | regulators, Dual slot memory card transceivers, real-time clock |
88e75cc3 DB |
153 | and other features that are often used in portable devices like |
154 | cell phones and PDAs. | |
155 | ||
a603a7fa | 156 | config TWL4030_CORE |
e8deb28c | 157 | bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support" |
67460a7c | 158 | depends on I2C=y && GENERIC_HARDIRQS |
a603a7fa | 159 | help |
e8deb28c | 160 | Say yes here if you have TWL4030 / TWL6030 family chip on your board. |
a603a7fa DB |
161 | This core driver provides register access and IRQ handling |
162 | facilities, and registers devices for the various functions | |
163 | so that function-specific drivers can bind to them. | |
164 | ||
165 | These multi-function chips are found on many OMAP2 and OMAP3 | |
166 | boards, providing power management, RTC, GPIO, keypad, a | |
167 | high speed USB OTG transceiver, an audio codec (on most | |
168 | versions) and many other features. | |
169 | ||
ebf0bd36 AK |
170 | config TWL4030_POWER |
171 | bool "Support power resources on TWL4030 family chips" | |
172 | depends on TWL4030_CORE && ARM | |
173 | help | |
174 | Say yes here if you want to use the power resources on the | |
175 | TWL4030 family chips. Most of these resources are regulators, | |
176 | which have a separate driver; some are control signals, such | |
177 | as clock request handshaking. | |
178 | ||
179 | This driver uses board-specific data to initialize the resources | |
180 | and load scripts controling which resources are switched off/on | |
181 | or reset when a sleep, wakeup or warm reset event occurs. | |
182 | ||
0b83ddeb PU |
183 | config TWL4030_CODEC |
184 | bool | |
185 | depends on TWL4030_CORE | |
186 | select MFD_CORE | |
187 | default n | |
188 | ||
27e34995 RV |
189 | config MFD_STMPE |
190 | bool "Support STMicroelectronics STMPE" | |
191 | depends on I2C=y && GENERIC_HARDIRQS | |
192 | select MFD_CORE | |
193 | help | |
194 | Support for the STMPE family of I/O Expanders from | |
195 | STMicroelectronics. | |
196 | ||
197 | Currently supported devices are: | |
198 | ||
199 | STMPE811: GPIO, Touchscreen | |
200 | STMPE1601: GPIO, Keypad | |
201 | STMPE2401: GPIO, Keypad | |
202 | STMPE2403: GPIO, Keypad | |
203 | ||
204 | This driver provides common support for accessing the device, | |
205 | additional drivers must be enabled in order to use the functionality | |
206 | of the device. Currently available sub drivers are: | |
207 | ||
208 | GPIO: stmpe-gpio | |
209 | Keypad: stmpe-keypad | |
210 | Touchscreen: stmpe-ts | |
211 | ||
b4ecd326 RV |
212 | config MFD_TC35892 |
213 | bool "Support Toshiba TC35892" | |
214 | depends on I2C=y && GENERIC_HARDIRQS | |
215 | select MFD_CORE | |
216 | help | |
217 | Support for the Toshiba TC35892 I/O Expander. | |
218 | ||
219 | This driver provides common support for accessing the device, | |
220 | additional drivers must be enabled in order to use the | |
221 | functionality of the device. | |
222 | ||
1c2c30ac SO |
223 | config MFD_TMIO |
224 | bool | |
225 | default n | |
226 | ||
311f3ac7 GL |
227 | config TMIO_MMC_DMA |
228 | bool | |
229 | select DMA_ENGINE | |
230 | select DMADEVICES | |
231 | ||
1f192015 IM |
232 | config MFD_T7L66XB |
233 | bool "Support Toshiba T7L66XB" | |
9ca68233 | 234 | depends on ARM && HAVE_CLK |
1f192015 | 235 | select MFD_CORE |
1c2c30ac | 236 | select MFD_TMIO |
1f192015 IM |
237 | help |
238 | Support for Toshiba Mobile IO Controller T7L66XB | |
239 | ||
cbdfb426 IM |
240 | config MFD_TC6387XB |
241 | bool "Support Toshiba TC6387XB" | |
9ca68233 | 242 | depends on ARM && HAVE_CLK |
cbdfb426 | 243 | select MFD_CORE |
1c2c30ac | 244 | select MFD_TMIO |
cbdfb426 IM |
245 | help |
246 | Support for Toshiba Mobile IO Controller TC6387XB | |
247 | ||
d6315949 DB |
248 | config MFD_TC6393XB |
249 | bool "Support Toshiba TC6393XB" | |
8d25b36b | 250 | depends on GPIOLIB && ARM |
f024ff10 | 251 | select MFD_CORE |
1c2c30ac | 252 | select MFD_TMIO |
d6315949 DB |
253 | help |
254 | Support for Toshiba Mobile IO Controller TC6393XB | |
255 | ||
8e2eaabf SO |
256 | config PMIC_DA903X |
257 | bool "Dialog Semiconductor DA9030/DA9034 PMIC Support" | |
258 | depends on I2C=y | |
259 | help | |
260 | Say yes here to support for Dialog Semiconductor DA9030 (a.k.a | |
261 | ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC | |
262 | usually found on PXA processors-based platforms. This includes | |
263 | the I2C driver and the core APIs _only_, you have to select | |
264 | individual components like LCD backlight, voltage regulators, | |
265 | LEDs and battery-charger under the corresponding menus. | |
a5736e0b MH |
266 | |
267 | config PMIC_ADP5520 | |
268 | bool "Analog Devices ADP5520/01 MFD PMIC Core Support" | |
269 | depends on I2C=y | |
270 | help | |
271 | Say yes here to add support for Analog Devices AD5520 and ADP5501, | |
272 | Multifunction Power Management IC. This includes | |
273 | the I2C driver and the core APIs _only_, you have to select | |
274 | individual components like LCD backlight, LEDs, GPIOs and Kepad | |
275 | under the corresponding menus. | |
8e2eaabf | 276 | |
d50f8f33 | 277 | config MFD_MAX8925 |
1f1cf8f9 | 278 | bool "Maxim Semiconductor MAX8925 PMIC Support" |
8d002bdc | 279 | depends on I2C=y && GENERIC_HARDIRQS |
1ad99893 | 280 | select MFD_CORE |
d50f8f33 HZ |
281 | help |
282 | Say yes here to support for Maxim Semiconductor MAX8925. This is | |
283 | a Power Management IC. This driver provies common support for | |
284 | accessing the device, additional drivers must be enabled in order | |
285 | to use the functionality of the device. | |
286 | ||
1d9f9f04 MB |
287 | config MFD_WM8400 |
288 | tristate "Support Wolfson Microelectronics WM8400" | |
b8380c1a | 289 | select MFD_CORE |
9c366452 | 290 | depends on I2C |
1d9f9f04 MB |
291 | help |
292 | Support for the Wolfson Microelecronics WM8400 PMIC and audio | |
9e5aca58 | 293 | CODEC. This driver provides common support for accessing |
1d9f9f04 MB |
294 | the device, additional drivers must be enabled in order to use |
295 | the functionality of the device. | |
296 | ||
b11062b9 | 297 | config MFD_WM831X |
6e40173d | 298 | bool "Support Wolfson Microelectronics WM831x/2x PMICs" |
b11062b9 | 299 | select MFD_CORE |
8d002bdc | 300 | depends on I2C=y && GENERIC_HARDIRQS |
b11062b9 | 301 | help |
d4e0a89e MB |
302 | Support for the Wolfson Microelecronics WM831x and WM832x PMICs. |
303 | This driver provides common support for accessing the device, | |
b11062b9 MB |
304 | additional drivers must be enabled in order to use the |
305 | functionality of the device. | |
306 | ||
89b4012b | 307 | config MFD_WM8350 |
ecf926bc | 308 | bool |
8d002bdc | 309 | depends on GENERIC_HARDIRQS |
89b4012b MB |
310 | |
311 | config MFD_WM8350_CONFIG_MODE_0 | |
312 | bool | |
313 | depends on MFD_WM8350 | |
314 | ||
315 | config MFD_WM8350_CONFIG_MODE_1 | |
316 | bool | |
317 | depends on MFD_WM8350 | |
318 | ||
319 | config MFD_WM8350_CONFIG_MODE_2 | |
320 | bool | |
321 | depends on MFD_WM8350 | |
322 | ||
323 | config MFD_WM8350_CONFIG_MODE_3 | |
324 | bool | |
325 | depends on MFD_WM8350 | |
326 | ||
ca23f8c1 MB |
327 | config MFD_WM8351_CONFIG_MODE_0 |
328 | bool | |
329 | depends on MFD_WM8350 | |
330 | ||
331 | config MFD_WM8351_CONFIG_MODE_1 | |
332 | bool | |
333 | depends on MFD_WM8350 | |
334 | ||
335 | config MFD_WM8351_CONFIG_MODE_2 | |
336 | bool | |
337 | depends on MFD_WM8350 | |
338 | ||
339 | config MFD_WM8351_CONFIG_MODE_3 | |
340 | bool | |
341 | depends on MFD_WM8350 | |
342 | ||
96920630 MB |
343 | config MFD_WM8352_CONFIG_MODE_0 |
344 | bool | |
345 | depends on MFD_WM8350 | |
346 | ||
347 | config MFD_WM8352_CONFIG_MODE_1 | |
348 | bool | |
349 | depends on MFD_WM8350 | |
350 | ||
351 | config MFD_WM8352_CONFIG_MODE_2 | |
352 | bool | |
353 | depends on MFD_WM8350 | |
354 | ||
355 | config MFD_WM8352_CONFIG_MODE_3 | |
356 | bool | |
357 | depends on MFD_WM8350 | |
358 | ||
c661a0b9 | 359 | config MFD_WM8350_I2C |
ecf926bc | 360 | bool "Support Wolfson Microelectronics WM8350 with I2C" |
c661a0b9 | 361 | select MFD_WM8350 |
8d002bdc | 362 | depends on I2C=y && GENERIC_HARDIRQS |
c661a0b9 MB |
363 | help |
364 | The WM8350 is an integrated audio and power management | |
365 | subsystem with watchdog and RTC functionality for embedded | |
366 | systems. This option enables core support for the WM8350 with | |
367 | I2C as the control interface. Additional options must be | |
368 | selected to enable support for the functionality of the chip. | |
369 | ||
9e501086 | 370 | config MFD_WM8994 |
c9fbf7e0 | 371 | bool "Support Wolfson Microelectronics WM8994" |
9e501086 | 372 | select MFD_CORE |
c9fbf7e0 | 373 | depends on I2C=y && GENERIC_HARDIRQS |
9e501086 MB |
374 | help |
375 | The WM8994 is a highly integrated hi-fi CODEC designed for | |
376 | smartphone applicatiosn. As well as audio functionality it | |
377 | has on board GPIO and regulator functionality which is | |
378 | supported via the relevant subsystems. This driver provides | |
379 | core support for the WM8994, in order to use the actual | |
380 | functionaltiy of the device other drivers must be enabled. | |
381 | ||
f52046b1 BR |
382 | config MFD_PCF50633 |
383 | tristate "Support for NXP PCF50633" | |
384 | depends on I2C | |
385 | help | |
386 | Say yes here if you have NXP PCF50633 chip on your board. | |
387 | This core driver provides register access and IRQ handling | |
388 | facilities, and registers devices for the various functions | |
389 | so that function-specific drivers can bind to them. | |
390 | ||
8238addc SH |
391 | config MFD_MC13783 |
392 | tristate "Support Freescale MC13783" | |
393 | depends on SPI_MASTER | |
394 | select MFD_CORE | |
395 | help | |
396 | Support for the Freescale (Atlas) MC13783 PMIC and audio CODEC. | |
397 | This driver provides common support for accessing the device, | |
398 | additional drivers must be enabled in order to use the | |
399 | functionality of the device. | |
400 | ||
08c3e06a BR |
401 | config PCF50633_ADC |
402 | tristate "Support for NXP PCF50633 ADC" | |
403 | depends on MFD_PCF50633 | |
404 | help | |
405 | Say yes here if you want to include support for ADC in the | |
406 | NXP PCF50633 chip. | |
407 | ||
6a3d119b BR |
408 | config PCF50633_GPIO |
409 | tristate "Support for NXP PCF50633 GPIO" | |
410 | depends on MFD_PCF50633 | |
411 | help | |
412 | Say yes here if you want to include support GPIO for pins on | |
413 | the PCF50633 chip. | |
414 | ||
fa661258 MW |
415 | config ABX500_CORE |
416 | bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions" | |
417 | default y if ARCH_U300 | |
418 | help | |
419 | Say yes here if you have the ABX500 Mixed Signal IC family | |
420 | chips. This core driver expose register access functions. | |
421 | Functionality specific drivers using these functions can | |
422 | remain unchanged when IC changes. Binding of the functions to | |
423 | actual register access is done by the IC core driver. | |
424 | ||
14fa5691 | 425 | config AB3100_CORE |
2071db48 | 426 | bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions" |
fa661258 | 427 | depends on I2C=y && ABX500_CORE |
14fa5691 LW |
428 | default y if ARCH_U300 |
429 | help | |
430 | Select this to enable the AB3100 Mixed Signal IC core | |
431 | functionality. This connects to a AB3100 on the I2C bus | |
432 | and expose a number of symbols needed for dependent devices | |
433 | to read and write registers and subscribe to events from | |
434 | this multi-functional IC. This is needed to use other features | |
435 | of the AB3100 such as battery-backed RTC, charging control, | |
436 | LEDs, vibrator, system power and temperature, power management | |
437 | and ALSA sound. | |
438 | ||
12992dd8 LW |
439 | config AB3100_OTP |
440 | tristate "ST-Ericsson AB3100 OTP functions" | |
441 | depends on AB3100_CORE | |
442 | default y if AB3100_CORE | |
443 | help | |
444 | Select this to enable the AB3100 Mixed Signal IC OTP (one-time | |
445 | programmable memory) support. This exposes a sysfs file to read | |
446 | out OTP values. | |
447 | ||
13a09f93 DR |
448 | config EZX_PCAP |
449 | bool "PCAP Support" | |
450 | depends on GENERIC_HARDIRQS && SPI_MASTER | |
451 | help | |
452 | This enables the PCAP ASIC present on EZX Phones. This is | |
453 | needed for MMC, TouchScreen, Sound, USB, etc.. | |
454 | ||
62579266 RV |
455 | config AB8500_CORE |
456 | bool "ST-Ericsson AB8500 Mixed Signal Power Management chip" | |
457 | depends on SPI=y && GENERIC_HARDIRQS | |
458 | select MFD_CORE | |
0c41839e | 459 | help |
62579266 | 460 | Select this option to enable access to AB8500 power management |
0c41839e SK |
461 | chip. This connects to U8500 on the SSP/SPI bus and exports |
462 | read/write functions for the devices to get access to this chip. | |
463 | This chip embeds various other multimedia funtionalities as well. | |
464 | ||
09bcb3f3 MW |
465 | config AB3550_CORE |
466 | bool "ST-Ericsson AB3550 Mixed Signal Circuit core functions" | |
467 | select MFD_CORE | |
468 | depends on I2C=y && GENERIC_HARDIRQS && ABX500_CORE | |
469 | help | |
470 | Select this to enable the AB3550 Mixed Signal IC core | |
471 | functionality. This connects to a AB3550 on the I2C bus | |
472 | and expose a number of symbols needed for dependent devices | |
473 | to read and write registers and subscribe to events from | |
474 | this multi-functional IC. This is needed to use other features | |
475 | of the AB3550 such as battery-backed RTC, charging control, | |
476 | LEDs, vibrator, system power and temperature, power management | |
477 | and ALSA sound. | |
478 | ||
8edbede9 RR |
479 | config MFD_TIMBERDALE |
480 | tristate "Support for the Timberdale FPGA" | |
481 | select MFD_CORE | |
546e29b6 | 482 | depends on PCI && GPIOLIB |
8edbede9 RR |
483 | ---help--- |
484 | This is the core driver for the timberdale FPGA. This device is a | |
485 | multifunction device which exposes numerous platform devices. | |
486 | ||
487 | The timberdale FPGA can be found on the Intel Atom development board | |
488 | for in-vehicle infontainment, called Russellville. | |
e82c60ae DT |
489 | |
490 | config LPC_SCH | |
491 | tristate "Intel SCH LPC" | |
492 | depends on PCI | |
493 | select MFD_CORE | |
494 | help | |
495 | LPC bridge function of the Intel SCH provides support for | |
496 | System Management Bus and General Purpose I/O. | |
497 | ||
e090d506 FF |
498 | config MFD_RDC321X |
499 | tristate "Support for RDC-R321x southbridge" | |
500 | select MFD_CORE | |
501 | depends on PCI | |
502 | help | |
503 | Say yes here if you want to have support for the RDC R-321x SoC | |
504 | southbridge which provides access to GPIOs and Watchdog using the | |
505 | southbridge PCI device configuration space. | |
506 | ||
bd358132 IS |
507 | config MFD_JANZ_CMODIO |
508 | tristate "Support for Janz CMOD-IO PCI MODULbus Carrier Board" | |
509 | select MFD_CORE | |
510 | depends on PCI | |
511 | help | |
512 | This is the core driver for the Janz CMOD-IO PCI MODULbus | |
513 | carrier board. This device is a PCI to MODULbus bridge which may | |
514 | host many different types of MODULbus daughterboards, including | |
515 | CAN and GPIO controllers. | |
516 | ||
91f4debf LPC |
517 | config MFD_JZ4740_ADC |
518 | tristate "Support for the JZ4740 SoC ADC core" | |
519 | select MFD_CORE | |
520 | depends on MACH_JZ4740 | |
521 | help | |
522 | Say yes here if you want support for the ADC unit in the JZ4740 SoC. | |
523 | This driver is necessary for jz4740-battery and jz4740-hwmon driver. | |
524 | ||
38270644 | 525 | endif # MFD_SUPPORT |
b6d6454f | 526 | |
a4e137ab | 527 | menu "Multimedia Capabilities Port drivers" |
f751d50f | 528 | depends on ARCH_SA1100 |
a4e137ab RK |
529 | |
530 | config MCP | |
531 | tristate | |
532 | ||
5e742ad6 RK |
533 | # Interface drivers |
534 | config MCP_SA11X0 | |
535 | tristate "Support SA11x0 MCP interface" | |
536 | depends on ARCH_SA1100 | |
537 | select MCP | |
538 | ||
05c45ca9 RK |
539 | # Chip drivers |
540 | config MCP_UCB1200 | |
541 | tristate "Support for UCB1200 / UCB1300" | |
542 | depends on MCP | |
543 | ||
acb45439 RK |
544 | config MCP_UCB1200_TS |
545 | tristate "Touchscreen interface support" | |
546 | depends on MCP_UCB1200 && INPUT | |
547 | ||
a4e137ab | 548 | endmenu |