sdhci-spear: ST SPEAr based SDHCI controller glue
[deliverable/linux.git] / drivers / mmc / host / sdhci-spear.c
CommitLineData
c63b3cba
VK
1/*
2 * drivers/mmc/host/sdhci-spear.c
3 *
4 * Support of SDHCI platform devices for spear soc family
5 *
6 * Copyright (C) 2010 ST Microelectronics
7 * Viresh Kumar<viresh.kumar@st.com>
8 *
9 * Inspired by sdhci-pltfm.c
10 *
11 * This file is licensed under the terms of the GNU General Public
12 * License version 2. This program is licensed "as is" without any
13 * warranty of any kind, whether express or implied.
14 */
15
16#include <linux/clk.h>
17#include <linux/delay.h>
18#include <linux/gpio.h>
19#include <linux/highmem.h>
20#include <linux/interrupt.h>
21#include <linux/irq.h>
22#include <linux/platform_device.h>
23#include <linux/slab.h>
24#include <linux/mmc/host.h>
25#include <linux/mmc/sdhci-spear.h>
26#include <linux/io.h>
27#include "sdhci.h"
28
29struct spear_sdhci {
30 struct clk *clk;
31 struct sdhci_plat_data *data;
32};
33
34/* sdhci ops */
35static struct sdhci_ops sdhci_pltfm_ops = {
36 /* Nothing to do for now. */
37};
38
39/* gpio card detection interrupt handler */
40static irqreturn_t sdhci_gpio_irq(int irq, void *dev_id)
41{
42 struct platform_device *pdev = dev_id;
43 struct sdhci_host *host = platform_get_drvdata(pdev);
44 struct spear_sdhci *sdhci = dev_get_platdata(&pdev->dev);
45 unsigned long gpio_irq_type;
46 int val;
47
48 val = gpio_get_value(sdhci->data->card_int_gpio);
49
50 /* val == 1 -> card removed, val == 0 -> card inserted */
51 /* if card removed - set irq for low level, else vice versa */
52 gpio_irq_type = val ? IRQF_TRIGGER_LOW : IRQF_TRIGGER_HIGH;
53 set_irq_type(irq, gpio_irq_type);
54
55 if (sdhci->data->card_power_gpio >= 0) {
56 if (!sdhci->data->power_always_enb) {
57 /* if card inserted, give power, otherwise remove it */
58 val = sdhci->data->power_active_high ? !val : val ;
59 gpio_set_value(sdhci->data->card_power_gpio, val);
60 }
61 }
62
63 /* inform sdhci driver about card insertion/removal */
64 tasklet_schedule(&host->card_tasklet);
65
66 return IRQ_HANDLED;
67}
68
69static int __devinit sdhci_probe(struct platform_device *pdev)
70{
71 struct sdhci_host *host;
72 struct resource *iomem;
73 struct spear_sdhci *sdhci;
74 int ret;
75
76 BUG_ON(pdev == NULL);
77
78 iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
79 if (!iomem) {
80 ret = -ENOMEM;
81 dev_dbg(&pdev->dev, "memory resource not defined\n");
82 goto err;
83 }
84
85 if (!request_mem_region(iomem->start, resource_size(iomem),
86 "spear-sdhci")) {
87 ret = -EBUSY;
88 dev_dbg(&pdev->dev, "cannot request region\n");
89 goto err;
90 }
91
92 sdhci = kzalloc(sizeof(*sdhci), GFP_KERNEL);
93 if (!sdhci) {
94 ret = -ENOMEM;
95 dev_dbg(&pdev->dev, "cannot allocate memory for sdhci\n");
96 goto err_kzalloc;
97 }
98
99 /* clk enable */
100 sdhci->clk = clk_get(&pdev->dev, NULL);
101 if (IS_ERR(sdhci->clk)) {
102 ret = PTR_ERR(sdhci->clk);
103 dev_dbg(&pdev->dev, "Error getting clock\n");
104 goto err_clk_get;
105 }
106
107 ret = clk_enable(sdhci->clk);
108 if (ret) {
109 dev_dbg(&pdev->dev, "Error enabling clock\n");
110 goto err_clk_enb;
111 }
112
113 /* overwrite platform_data */
114 sdhci->data = dev_get_platdata(&pdev->dev);
115 pdev->dev.platform_data = sdhci;
116
117 if (pdev->dev.parent)
118 host = sdhci_alloc_host(pdev->dev.parent, 0);
119 else
120 host = sdhci_alloc_host(&pdev->dev, 0);
121
122 if (IS_ERR(host)) {
123 ret = PTR_ERR(host);
124 dev_dbg(&pdev->dev, "error allocating host\n");
125 goto err_alloc_host;
126 }
127
128 host->hw_name = "sdhci";
129 host->ops = &sdhci_pltfm_ops;
130 host->irq = platform_get_irq(pdev, 0);
131 host->quirks = SDHCI_QUIRK_BROKEN_ADMA;
132
133 host->ioaddr = ioremap(iomem->start, resource_size(iomem));
134 if (!host->ioaddr) {
135 ret = -ENOMEM;
136 dev_dbg(&pdev->dev, "failed to remap registers\n");
137 goto err_ioremap;
138 }
139
140 ret = sdhci_add_host(host);
141 if (ret) {
142 dev_dbg(&pdev->dev, "error adding host\n");
143 goto err_add_host;
144 }
145
146 platform_set_drvdata(pdev, host);
147
148 /*
149 * It is optional to use GPIOs for sdhci Power control & sdhci card
150 * interrupt detection. If sdhci->data is NULL, then use original sdhci
151 * lines otherwise GPIO lines.
152 * If GPIO is selected for power control, then power should be disabled
153 * after card removal and should be enabled when card insertion
154 * interrupt occurs
155 */
156 if (!sdhci->data)
157 return 0;
158
159 if (sdhci->data->card_power_gpio >= 0) {
160 int val = 0;
161
162 ret = gpio_request(sdhci->data->card_power_gpio, "sdhci");
163 if (ret < 0) {
164 dev_dbg(&pdev->dev, "gpio request fail: %d\n",
165 sdhci->data->card_power_gpio);
166 goto err_pgpio_request;
167 }
168
169 if (sdhci->data->power_always_enb)
170 val = sdhci->data->power_active_high;
171 else
172 val = !sdhci->data->power_active_high;
173
174 ret = gpio_direction_output(sdhci->data->card_power_gpio, val);
175 if (ret) {
176 dev_dbg(&pdev->dev, "gpio set direction fail: %d\n",
177 sdhci->data->card_power_gpio);
178 goto err_pgpio_direction;
179 }
180
181 gpio_set_value(sdhci->data->card_power_gpio, 1);
182 }
183
184 if (sdhci->data->card_int_gpio >= 0) {
185 ret = gpio_request(sdhci->data->card_int_gpio, "sdhci");
186 if (ret < 0) {
187 dev_dbg(&pdev->dev, "gpio request fail: %d\n",
188 sdhci->data->card_int_gpio);
189 goto err_igpio_request;
190 }
191
192 ret = gpio_direction_input(sdhci->data->card_int_gpio);
193 if (ret) {
194 dev_dbg(&pdev->dev, "gpio set direction fail: %d\n",
195 sdhci->data->card_int_gpio);
196 goto err_igpio_direction;
197 }
198 ret = request_irq(gpio_to_irq(sdhci->data->card_int_gpio),
199 sdhci_gpio_irq, IRQF_TRIGGER_LOW,
200 mmc_hostname(host->mmc), pdev);
201 if (ret) {
202 dev_dbg(&pdev->dev, "gpio request irq fail: %d\n",
203 sdhci->data->card_int_gpio);
204 goto err_igpio_request_irq;
205 }
206
207 }
208
209 return 0;
210
211err_igpio_request_irq:
212err_igpio_direction:
213 if (sdhci->data->card_int_gpio >= 0)
214 gpio_free(sdhci->data->card_int_gpio);
215err_igpio_request:
216err_pgpio_direction:
217 if (sdhci->data->card_power_gpio >= 0)
218 gpio_free(sdhci->data->card_power_gpio);
219err_pgpio_request:
220 platform_set_drvdata(pdev, NULL);
221 sdhci_remove_host(host, 1);
222err_add_host:
223 iounmap(host->ioaddr);
224err_ioremap:
225 sdhci_free_host(host);
226err_alloc_host:
227 clk_disable(sdhci->clk);
228err_clk_enb:
229 clk_put(sdhci->clk);
230err_clk_get:
231 kfree(sdhci);
232err_kzalloc:
233 release_mem_region(iomem->start, resource_size(iomem));
234err:
235 dev_err(&pdev->dev, "spear-sdhci probe failed: %d\n", ret);
236 return ret;
237}
238
239static int __devexit sdhci_remove(struct platform_device *pdev)
240{
241 struct sdhci_host *host = platform_get_drvdata(pdev);
242 struct resource *iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
243 struct spear_sdhci *sdhci = dev_get_platdata(&pdev->dev);
244 int dead;
245 u32 scratch;
246
247 if (sdhci->data) {
248 if (sdhci->data->card_int_gpio >= 0) {
249 free_irq(gpio_to_irq(sdhci->data->card_int_gpio), pdev);
250 gpio_free(sdhci->data->card_int_gpio);
251 }
252
253 if (sdhci->data->card_power_gpio >= 0)
254 gpio_free(sdhci->data->card_power_gpio);
255 }
256
257 platform_set_drvdata(pdev, NULL);
258 dead = 0;
259 scratch = readl(host->ioaddr + SDHCI_INT_STATUS);
260 if (scratch == (u32)-1)
261 dead = 1;
262
263 sdhci_remove_host(host, dead);
264 iounmap(host->ioaddr);
265 sdhci_free_host(host);
266 clk_disable(sdhci->clk);
267 clk_put(sdhci->clk);
268 kfree(sdhci);
269 if (iomem)
270 release_mem_region(iomem->start, resource_size(iomem));
271
272 return 0;
273}
274
275static struct platform_driver sdhci_driver = {
276 .driver = {
277 .name = "sdhci",
278 .owner = THIS_MODULE,
279 },
280 .probe = sdhci_probe,
281 .remove = __devexit_p(sdhci_remove),
282};
283
284static int __init sdhci_init(void)
285{
286 return platform_driver_register(&sdhci_driver);
287}
288module_init(sdhci_init);
289
290static void __exit sdhci_exit(void)
291{
292 platform_driver_unregister(&sdhci_driver);
293}
294module_exit(sdhci_exit);
295
296MODULE_DESCRIPTION("SPEAr Secure Digital Host Controller Interface driver");
297MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
298MODULE_LICENSE("GPL v2");
This page took 0.035455 seconds and 5 git commands to generate.