projects / deliverable / linux.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
mmc: sd: add support for driver type selection
[deliverable/linux.git] / drivers / mmc / host / sdhci.c
CommitLineData
d129bceb 1/*
70f10482 2 * linux/drivers/mmc/host/sdhci.c - Secure Digital Host Controller Interface driver
d129bceb 3 *
b69c9058 4 * Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
d129bceb
PO		 5 *
6 * This program is free software; you can redistribute it and/or modify
643f720c
PO		 7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or (at
9 * your option) any later version.
84c46a53
PO		 10 *
11 * Thanks to the following companies for their support:
12 *
13 * - JMicron (hardware and technical support)
d129bceb
PO		 14 */
15
d129bceb
PO		 16#include <linux/delay.h>
17#include <linux/highmem.h>
b8c86fc5 18#include <linux/io.h>
d129bceb 19#include <linux/dma-mapping.h>
5a0e3ad6 20#include <linux/slab.h>
11763609 21#include <linux/scatterlist.h>
9bea3c85 22#include <linux/regulator/consumer.h>
d129bceb 23
2f730fec
PO		 24#include <linux/leds.h>
25
22113efd 26#include <linux/mmc/mmc.h>
d129bceb 27#include <linux/mmc/host.h>
d129bceb 28
d129bceb
PO		 29#include "sdhci.h"
30
31#define DRIVER_NAME "sdhci"
d129bceb 32
d129bceb 33#define DBG(f, x...) \
c6563178 34 pr_debug(DRIVER_NAME " [%s()]: " f, __func__,## x)
d129bceb 35
f9134319
PO		 36#if defined(CONFIG_LEDS_CLASS) || (defined(CONFIG_LEDS_CLASS_MODULE) && \
37 defined(CONFIG_MMC_SDHCI_MODULE))
38#define SDHCI_USE_LEDS_CLASS
39#endif
40
df673b22 41static unsigned int debug_quirks = 0;
67435274 42
d129bceb
PO		 43static void sdhci_finish_data(struct sdhci_host *);
44
45static void sdhci_send_command(struct sdhci_host *, struct mmc_command *);
46static void sdhci_finish_command(struct sdhci_host *);
47
48static void sdhci_dumpregs(struct sdhci_host *host)
49{
412ab659
PR		 50 printk(KERN_DEBUG DRIVER_NAME ": =========== REGISTER DUMP (%s)===========\n",
51 mmc_hostname(host->mmc));
d129bceb
PO		 52
53 printk(KERN_DEBUG DRIVER_NAME ": Sys addr: 0x%08x | Version: 0x%08x\n",
4e4141a5
AV		 54 sdhci_readl(host, SDHCI_DMA_ADDRESS),
55 sdhci_readw(host, SDHCI_HOST_VERSION));
d129bceb 56 printk(KERN_DEBUG DRIVER_NAME ": Blk size: 0x%08x | Blk cnt: 0x%08x\n",
4e4141a5
AV		 57 sdhci_readw(host, SDHCI_BLOCK_SIZE),
58 sdhci_readw(host, SDHCI_BLOCK_COUNT));
d129bceb 59 printk(KERN_DEBUG DRIVER_NAME ": Argument: 0x%08x | Trn mode: 0x%08x\n",
4e4141a5
AV		 60 sdhci_readl(host, SDHCI_ARGUMENT),
61 sdhci_readw(host, SDHCI_TRANSFER_MODE));
d129bceb 62 printk(KERN_DEBUG DRIVER_NAME ": Present: 0x%08x | Host ctl: 0x%08x\n",
4e4141a5
AV		 63 sdhci_readl(host, SDHCI_PRESENT_STATE),
64 sdhci_readb(host, SDHCI_HOST_CONTROL));
d129bceb 65 printk(KERN_DEBUG DRIVER_NAME ": Power: 0x%08x | Blk gap: 0x%08x\n",
4e4141a5
AV		 66 sdhci_readb(host, SDHCI_POWER_CONTROL),
67 sdhci_readb(host, SDHCI_BLOCK_GAP_CONTROL));
d129bceb 68 printk(KERN_DEBUG DRIVER_NAME ": Wake-up: 0x%08x | Clock: 0x%08x\n",
4e4141a5
AV		 69 sdhci_readb(host, SDHCI_WAKE_UP_CONTROL),
70 sdhci_readw(host, SDHCI_CLOCK_CONTROL));
d129bceb 71 printk(KERN_DEBUG DRIVER_NAME ": Timeout: 0x%08x | Int stat: 0x%08x\n",
4e4141a5
AV		 72 sdhci_readb(host, SDHCI_TIMEOUT_CONTROL),
73 sdhci_readl(host, SDHCI_INT_STATUS));
d129bceb 74 printk(KERN_DEBUG DRIVER_NAME ": Int enab: 0x%08x | Sig enab: 0x%08x\n",
4e4141a5
AV		 75 sdhci_readl(host, SDHCI_INT_ENABLE),
76 sdhci_readl(host, SDHCI_SIGNAL_ENABLE));
d129bceb 77 printk(KERN_DEBUG DRIVER_NAME ": AC12 err: 0x%08x | Slot int: 0x%08x\n",
4e4141a5
AV		 78 sdhci_readw(host, SDHCI_ACMD12_ERR),
79 sdhci_readw(host, SDHCI_SLOT_INT_STATUS));
e8120ad1 80 printk(KERN_DEBUG DRIVER_NAME ": Caps: 0x%08x | Caps_1: 0x%08x\n",
4e4141a5 81 sdhci_readl(host, SDHCI_CAPABILITIES),
e8120ad1
PR		 82 sdhci_readl(host, SDHCI_CAPABILITIES_1));
83 printk(KERN_DEBUG DRIVER_NAME ": Cmd: 0x%08x | Max curr: 0x%08x\n",
84 sdhci_readw(host, SDHCI_COMMAND),
4e4141a5 85 sdhci_readl(host, SDHCI_MAX_CURRENT));
f2119df6
AN		 86 printk(KERN_DEBUG DRIVER_NAME ": Host ctl2: 0x%08x\n",
87 sdhci_readw(host, SDHCI_HOST_CONTROL2));
d129bceb 88
be3f4ae0
BD		 89 if (host->flags & SDHCI_USE_ADMA)
90 printk(KERN_DEBUG DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x\n",
91 readl(host->ioaddr + SDHCI_ADMA_ERROR),
92 readl(host->ioaddr + SDHCI_ADMA_ADDRESS));
93
d129bceb
PO		 94 printk(KERN_DEBUG DRIVER_NAME ": ===========================================\n");
95}
96
97/*****************************************************************************\
98 * *
99 * Low level functions *
100 * *
101\*****************************************************************************/
102
7260cf5e
AV		 103static void sdhci_clear_set_irqs(struct sdhci_host *host, u32 clear, u32 set)
104{
105 u32 ier;
106
107 ier = sdhci_readl(host, SDHCI_INT_ENABLE);
108 ier &= ~clear;
109 ier |= set;
110 sdhci_writel(host, ier, SDHCI_INT_ENABLE);
111 sdhci_writel(host, ier, SDHCI_SIGNAL_ENABLE);
112}
113
114static void sdhci_unmask_irqs(struct sdhci_host *host, u32 irqs)
115{
116 sdhci_clear_set_irqs(host, 0, irqs);
117}
118
119static void sdhci_mask_irqs(struct sdhci_host *host, u32 irqs)
120{
121 sdhci_clear_set_irqs(host, irqs, 0);
122}
123
124static void sdhci_set_card_detection(struct sdhci_host *host, bool enable)
125{
126 u32 irqs = SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT;
127
68d1fb7e
AV		 128 if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION)
129 return;
130
7260cf5e
AV		 131 if (enable)
132 sdhci_unmask_irqs(host, irqs);
133 else
134 sdhci_mask_irqs(host, irqs);
135}
136
137static void sdhci_enable_card_detection(struct sdhci_host *host)
138{
139 sdhci_set_card_detection(host, true);
140}
141
142static void sdhci_disable_card_detection(struct sdhci_host *host)
143{
144 sdhci_set_card_detection(host, false);
145}
146
d129bceb
PO		 147static void sdhci_reset(struct sdhci_host *host, u8 mask)
148{
e16514d8 149 unsigned long timeout;
063a9dbb 150 u32 uninitialized_var(ier);
e16514d8 151
b8c86fc5 152 if (host->quirks & SDHCI_QUIRK_NO_CARD_NO_RESET) {
4e4141a5 153 if (!(sdhci_readl(host, SDHCI_PRESENT_STATE) &
8a4da143
PO		 154 SDHCI_CARD_PRESENT))
155 return;
156 }
157
063a9dbb
AV		 158 if (host->quirks & SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET)
159 ier = sdhci_readl(host, SDHCI_INT_ENABLE);
160
393c1a34
PR		 161 if (host->ops->platform_reset_enter)
162 host->ops->platform_reset_enter(host, mask);
163
4e4141a5 164 sdhci_writeb(host, mask, SDHCI_SOFTWARE_RESET);
d129bceb 165
e16514d8 166 if (mask & SDHCI_RESET_ALL)
d129bceb
PO		 167 host->clock = 0;
168
e16514d8
PO		 169 /* Wait max 100 ms */
170 timeout = 100;
171
172 /* hw clears the bit when it's done */
4e4141a5 173 while (sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask) {
e16514d8 174 if (timeout == 0) {
acf1da45 175 printk(KERN_ERR "%s: Reset 0x%x never completed.\n",
e16514d8
PO		 176 mmc_hostname(host->mmc), (int)mask);
177 sdhci_dumpregs(host);
178 return;
179 }
180 timeout--;
181 mdelay(1);
d129bceb 182 }
063a9dbb 183
393c1a34
PR		 184 if (host->ops->platform_reset_exit)
185 host->ops->platform_reset_exit(host, mask);
186
063a9dbb
AV		 187 if (host->quirks & SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET)
188 sdhci_clear_set_irqs(host, SDHCI_INT_ALL_MASK, ier);
d129bceb
PO		 189}
190
2f4cbb3d
NP		 191static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios);
192
193static void sdhci_init(struct sdhci_host *host, int soft)
d129bceb 194{
2f4cbb3d
NP		 195 if (soft)
196 sdhci_reset(host, SDHCI_RESET_CMD|SDHCI_RESET_DATA);
197 else
198 sdhci_reset(host, SDHCI_RESET_ALL);
d129bceb 199
7260cf5e
AV		 200 sdhci_clear_set_irqs(host, SDHCI_INT_ALL_MASK,
201 SDHCI_INT_BUS_POWER | SDHCI_INT_DATA_END_BIT |
3192a28f
PO		 202 SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_INDEX |
203 SDHCI_INT_END_BIT | SDHCI_INT_CRC | SDHCI_INT_TIMEOUT |
6aa943ab 204 SDHCI_INT_DATA_END | SDHCI_INT_RESPONSE);
2f4cbb3d
NP		 205
206 if (soft) {
207 /* force clock reconfiguration */
208 host->clock = 0;
209 sdhci_set_ios(host->mmc, &host->mmc->ios);
210 }
7260cf5e 211}
d129bceb 212
7260cf5e
AV		 213static void sdhci_reinit(struct sdhci_host *host)
214{
2f4cbb3d 215 sdhci_init(host, 0);
7260cf5e 216 sdhci_enable_card_detection(host);
d129bceb
PO		 217}
218
219static void sdhci_activate_led(struct sdhci_host *host)
220{
221 u8 ctrl;
222
4e4141a5 223 ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
d129bceb 224 ctrl |= SDHCI_CTRL_LED;
4e4141a5 225 sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
d129bceb
PO		 226}
227
228static void sdhci_deactivate_led(struct sdhci_host *host)
229{
230 u8 ctrl;
231
4e4141a5 232 ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
d129bceb 233 ctrl &= ~SDHCI_CTRL_LED;
4e4141a5 234 sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
d129bceb
PO		 235}
236
f9134319 237#ifdef SDHCI_USE_LEDS_CLASS
2f730fec
PO		 238static void sdhci_led_control(struct led_classdev *led,
239 enum led_brightness brightness)
240{
241 struct sdhci_host *host = container_of(led, struct sdhci_host, led);
242 unsigned long flags;
243
244 spin_lock_irqsave(&host->lock, flags);
245
246 if (brightness == LED_OFF)
247 sdhci_deactivate_led(host);
248 else
249 sdhci_activate_led(host);
250
251 spin_unlock_irqrestore(&host->lock, flags);
252}
253#endif
254
d129bceb
PO		 255/*****************************************************************************\
256 * *
257 * Core functions *
258 * *
259\*****************************************************************************/
260
a406f5a3 261static void sdhci_read_block_pio(struct sdhci_host *host)
d129bceb 262{
7659150c
PO		 263 unsigned long flags;
264 size_t blksize, len, chunk;
7244b85b 265 u32 uninitialized_var(scratch);
7659150c 266 u8 *buf;
d129bceb 267
a406f5a3 268 DBG("PIO reading\n");
d129bceb 269
a406f5a3 270 blksize = host->data->blksz;
7659150c 271 chunk = 0;
d129bceb 272
7659150c 273 local_irq_save(flags);
d129bceb 274
a406f5a3 275 while (blksize) {
7659150c
PO		 276 if (!sg_miter_next(&host->sg_miter))
277 BUG();
d129bceb 278
7659150c 279 len = min(host->sg_miter.length, blksize);
d129bceb 280
7659150c
PO		 281 blksize -= len;
282 host->sg_miter.consumed = len;
14d836e7 283
7659150c 284 buf = host->sg_miter.addr;
d129bceb 285
7659150c
PO		 286 while (len) {
287 if (chunk == 0) {
4e4141a5 288 scratch = sdhci_readl(host, SDHCI_BUFFER);
7659150c 289 chunk = 4;
a406f5a3 290 }
7659150c
PO		 291
292 *buf = scratch & 0xFF;
293
294 buf++;
295 scratch >>= 8;
296 chunk--;
297 len--;
d129bceb 298 }
a406f5a3 299 }
7659150c
PO		 300
301 sg_miter_stop(&host->sg_miter);
302
303 local_irq_restore(flags);
a406f5a3 304}
d129bceb 305
a406f5a3
PO		 306static void sdhci_write_block_pio(struct sdhci_host *host)
307{
7659150c
PO		 308 unsigned long flags;
309 size_t blksize, len, chunk;
310 u32 scratch;
311 u8 *buf;
d129bceb 312
a406f5a3
PO		 313 DBG("PIO writing\n");
314
315 blksize = host->data->blksz;
7659150c
PO		 316 chunk = 0;
317 scratch = 0;
d129bceb 318
7659150c 319 local_irq_save(flags);
d129bceb 320
a406f5a3 321 while (blksize) {
7659150c
PO		 322 if (!sg_miter_next(&host->sg_miter))
323 BUG();
a406f5a3 324
7659150c
PO		 325 len = min(host->sg_miter.length, blksize);
326
327 blksize -= len;
328 host->sg_miter.consumed = len;
329
330 buf = host->sg_miter.addr;
d129bceb 331
7659150c
PO		 332 while (len) {
333 scratch |= (u32)*buf << (chunk * 8);
334
335 buf++;
336 chunk++;
337 len--;
338
339 if ((chunk == 4) || ((len == 0) && (blksize == 0))) {
4e4141a5 340 sdhci_writel(host, scratch, SDHCI_BUFFER);
7659150c
PO		 341 chunk = 0;
342 scratch = 0;
d129bceb 343 }
d129bceb
PO		 344 }
345 }
7659150c
PO		 346
347 sg_miter_stop(&host->sg_miter);
348
349 local_irq_restore(flags);
a406f5a3
PO		 350}
351
352static void sdhci_transfer_pio(struct sdhci_host *host)
353{
354 u32 mask;
355
356 BUG_ON(!host->data);
357
7659150c 358 if (host->blocks == 0)
a406f5a3
PO		 359 return;
360
361 if (host->data->flags & MMC_DATA_READ)
362 mask = SDHCI_DATA_AVAILABLE;
363 else
364 mask = SDHCI_SPACE_AVAILABLE;
365
4a3cba32
PO		 366 /*
367 * Some controllers (JMicron JMB38x) mess up the buffer bits
368 * for transfers < 4 bytes. As long as it is just one block,
369 * we can ignore the bits.
370 */
371 if ((host->quirks & SDHCI_QUIRK_BROKEN_SMALL_PIO) &&
372 (host->data->blocks == 1))
373 mask = ~0;
374
4e4141a5 375 while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
3e3bf207
AV		 376 if (host->quirks & SDHCI_QUIRK_PIO_NEEDS_DELAY)
377 udelay(100);
378
a406f5a3
PO		 379 if (host->data->flags & MMC_DATA_READ)
380 sdhci_read_block_pio(host);
381 else
382 sdhci_write_block_pio(host);
d129bceb 383
7659150c
PO		 384 host->blocks--;
385 if (host->blocks == 0)
a406f5a3 386 break;
a406f5a3 387 }
d129bceb 388
a406f5a3 389 DBG("PIO transfer complete.\n");
d129bceb
PO		 390}
391
2134a922
PO		 392static char *sdhci_kmap_atomic(struct scatterlist *sg, unsigned long *flags)
393{
394 local_irq_save(*flags);
395 return kmap_atomic(sg_page(sg), KM_BIO_SRC_IRQ) + sg->offset;
396}
397
398static void sdhci_kunmap_atomic(void *buffer, unsigned long *flags)
399{
400 kunmap_atomic(buffer, KM_BIO_SRC_IRQ);
401 local_irq_restore(*flags);
402}
403
118cd17d
BD		 404static void sdhci_set_adma_desc(u8 *desc, u32 addr, int len, unsigned cmd)
405{
9e506f35
BD		 406 __le32 *dataddr = (__le32 __force *)(desc + 4);
407 __le16 *cmdlen = (__le16 __force *)desc;
118cd17d 408
9e506f35
BD		 409 /* SDHCI specification says ADMA descriptors should be 4 byte
410 * aligned, so using 16 or 32bit operations should be safe. */
118cd17d 411
9e506f35
BD		 412 cmdlen[0] = cpu_to_le16(cmd);
413 cmdlen[1] = cpu_to_le16(len);
414
415 dataddr[0] = cpu_to_le32(addr);
118cd17d
BD		 416}
417
8f1934ce 418static int sdhci_adma_table_pre(struct sdhci_host *host,
2134a922
PO		 419 struct mmc_data *data)
420{
421 int direction;
422
423 u8 *desc;
424 u8 *align;
425 dma_addr_t addr;
426 dma_addr_t align_addr;
427 int len, offset;
428
429 struct scatterlist *sg;
430 int i;
431 char *buffer;
432 unsigned long flags;
433
434 /*
435 * The spec does not specify endianness of descriptor table.
436 * We currently guess that it is LE.
437 */
438
439 if (data->flags & MMC_DATA_READ)
440 direction = DMA_FROM_DEVICE;
441 else
442 direction = DMA_TO_DEVICE;
443
444 /*
445 * The ADMA descriptor table is mapped further down as we
446 * need to fill it with data first.
447 */
448
449 host->align_addr = dma_map_single(mmc_dev(host->mmc),
450 host->align_buffer, 128 * 4, direction);
8d8bb39b 451 if (dma_mapping_error(mmc_dev(host->mmc), host->align_addr))
8f1934ce 452 goto fail;
2134a922
PO		 453 BUG_ON(host->align_addr & 0x3);
454
455 host->sg_count = dma_map_sg(mmc_dev(host->mmc),
456 data->sg, data->sg_len, direction);
8f1934ce
PO		 457 if (host->sg_count == 0)
458 goto unmap_align;
2134a922
PO		 459
460 desc = host->adma_desc;
461 align = host->align_buffer;
462
463 align_addr = host->align_addr;
464
465 for_each_sg(data->sg, sg, host->sg_count, i) {
466 addr = sg_dma_address(sg);
467 len = sg_dma_len(sg);
468
469 /*
470 * The SDHCI specification states that ADMA
471 * addresses must be 32-bit aligned. If they
472 * aren't, then we use a bounce buffer for
473 * the (up to three) bytes that screw up the
474 * alignment.
475 */
476 offset = (4 - (addr & 0x3)) & 0x3;
477 if (offset) {
478 if (data->flags & MMC_DATA_WRITE) {
479 buffer = sdhci_kmap_atomic(sg, &flags);
6cefd05f 480 WARN_ON(((long)buffer & PAGE_MASK) > (PAGE_SIZE - 3));
2134a922
PO		 481 memcpy(align, buffer, offset);
482 sdhci_kunmap_atomic(buffer, &flags);
483 }
484
118cd17d
BD		 485 /* tran, valid */
486 sdhci_set_adma_desc(desc, align_addr, offset, 0x21);
2134a922
PO		 487
488 BUG_ON(offset > 65536);
489
2134a922
PO		 490 align += 4;
491 align_addr += 4;
492
493 desc += 8;
494
495 addr += offset;
496 len -= offset;
497 }
498
2134a922
PO		 499 BUG_ON(len > 65536);
500
118cd17d
BD		 501 /* tran, valid */
502 sdhci_set_adma_desc(desc, addr, len, 0x21);
2134a922
PO		 503 desc += 8;
504
505 /*
506 * If this triggers then we have a calculation bug
507 * somewhere. :/
508 */
509 WARN_ON((desc - host->adma_desc) > (128 * 2 + 1) * 4);
510 }
511
70764a90
TA		 512 if (host->quirks & SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC) {
513 /*
514 * Mark the last descriptor as the terminating descriptor
515 */
516 if (desc != host->adma_desc) {
517 desc -= 8;
518 desc[0] |= 0x2; /* end */
519 }
520 } else {
521 /*
522 * Add a terminating entry.
523 */
2134a922 524
70764a90
TA		 525 /* nop, end, valid */
526 sdhci_set_adma_desc(desc, 0, 0, 0x3);
527 }
2134a922
PO		 528
529 /*
530 * Resync align buffer as we might have changed it.
531 */
532 if (data->flags & MMC_DATA_WRITE) {
533 dma_sync_single_for_device(mmc_dev(host->mmc),
534 host->align_addr, 128 * 4, direction);
535 }
536
537 host->adma_addr = dma_map_single(mmc_dev(host->mmc),
538 host->adma_desc, (128 * 2 + 1) * 4, DMA_TO_DEVICE);
980167b7 539 if (dma_mapping_error(mmc_dev(host->mmc), host->adma_addr))
8f1934ce 540 goto unmap_entries;
2134a922 541 BUG_ON(host->adma_addr & 0x3);
8f1934ce
PO		 542
543 return 0;
544
545unmap_entries:
546 dma_unmap_sg(mmc_dev(host->mmc), data->sg,
547 data->sg_len, direction);
548unmap_align:
549 dma_unmap_single(mmc_dev(host->mmc), host->align_addr,
550 128 * 4, direction);
551fail:
552 return -EINVAL;
2134a922
PO		 553}
554
555static void sdhci_adma_table_post(struct sdhci_host *host,
556 struct mmc_data *data)
557{
558 int direction;
559
560 struct scatterlist *sg;
561 int i, size;
562 u8 *align;
563 char *buffer;
564 unsigned long flags;
565
566 if (data->flags & MMC_DATA_READ)
567 direction = DMA_FROM_DEVICE;
568 else
569 direction = DMA_TO_DEVICE;
570
571 dma_unmap_single(mmc_dev(host->mmc), host->adma_addr,
572 (128 * 2 + 1) * 4, DMA_TO_DEVICE);
573
574 dma_unmap_single(mmc_dev(host->mmc), host->align_addr,
575 128 * 4, direction);
576
577 if (data->flags & MMC_DATA_READ) {
578 dma_sync_sg_for_cpu(mmc_dev(host->mmc), data->sg,
579 data->sg_len, direction);
580
581 align = host->align_buffer;
582
583 for_each_sg(data->sg, sg, host->sg_count, i) {
584 if (sg_dma_address(sg) & 0x3) {
585 size = 4 - (sg_dma_address(sg) & 0x3);
586
587 buffer = sdhci_kmap_atomic(sg, &flags);
6cefd05f 588 WARN_ON(((long)buffer & PAGE_MASK) > (PAGE_SIZE - 3));
2134a922
PO		 589 memcpy(buffer, align, size);
590 sdhci_kunmap_atomic(buffer, &flags);
591
592 align += 4;
593 }
594 }
595 }
596
597 dma_unmap_sg(mmc_dev(host->mmc), data->sg,
598 data->sg_len, direction);
599}
600
a3c7778f 601static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd)
d129bceb 602{
1c8cde92 603 u8 count;
a3c7778f 604 struct mmc_data *data = cmd->data;
1c8cde92 605 unsigned target_timeout, current_timeout;
d129bceb 606
ee53ab5d
PO		 607 /*
608 * If the host controller provides us with an incorrect timeout
609 * value, just skip the check and use 0xE. The hardware may take
610 * longer to time out, but that's much better than having a too-short
611 * timeout value.
612 */
11a2f1b7 613 if (host->quirks & SDHCI_QUIRK_BROKEN_TIMEOUT_VAL)
ee53ab5d 614 return 0xE;
e538fbe8 615
a3c7778f
AW		 616 /* Unspecified timeout, assume max */
617 if (!data && !cmd->cmd_timeout_ms)
618 return 0xE;
d129bceb 619
a3c7778f
AW		 620 /* timeout in us */
621 if (!data)
622 target_timeout = cmd->cmd_timeout_ms * 1000;
623 else
624 target_timeout = data->timeout_ns / 1000 +
625 data->timeout_clks / host->clock;
81b39802 626
4b01681c
MB		 627 if (host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)
628 host->timeout_clk = host->clock / 1000;
629
1c8cde92
PO		 630 /*
631 * Figure out needed cycles.
632 * We do this in steps in order to fit inside a 32 bit int.
633 * The first step is the minimum timeout, which will have a
634 * minimum resolution of 6 bits:
635 * (1) 2^13*1000 > 2^22,
636 * (2) host->timeout_clk < 2^16
637 * =>
638 * (1) / (2) > 2^6
639 */
4b01681c 640 BUG_ON(!host->timeout_clk);
1c8cde92
PO		 641 count = 0;
642 current_timeout = (1 << 13) * 1000 / host->timeout_clk;
643 while (current_timeout < target_timeout) {
644 count++;
645 current_timeout <<= 1;
646 if (count >= 0xF)
647 break;
648 }
649
650 if (count >= 0xF) {
a3c7778f
AW		 651 printk(KERN_WARNING "%s: Too large timeout requested for CMD%d!\n",
652 mmc_hostname(host->mmc), cmd->opcode);
1c8cde92
PO		 653 count = 0xE;
654 }
655
ee53ab5d
PO		 656 return count;
657}
658
6aa943ab
AV		 659static void sdhci_set_transfer_irqs(struct sdhci_host *host)
660{
661 u32 pio_irqs = SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL;
662 u32 dma_irqs = SDHCI_INT_DMA_END | SDHCI_INT_ADMA_ERROR;
663
664 if (host->flags & SDHCI_REQ_USE_DMA)
665 sdhci_clear_set_irqs(host, pio_irqs, dma_irqs);
666 else
667 sdhci_clear_set_irqs(host, dma_irqs, pio_irqs);
668}
669
a3c7778f 670static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
ee53ab5d
PO		 671{
672 u8 count;
2134a922 673 u8 ctrl;
a3c7778f 674 struct mmc_data *data = cmd->data;
8f1934ce 675 int ret;
ee53ab5d
PO		 676
677 WARN_ON(host->data);
678
a3c7778f
AW		 679 if (data || (cmd->flags & MMC_RSP_BUSY)) {
680 count = sdhci_calc_timeout(host, cmd);
681 sdhci_writeb(host, count, SDHCI_TIMEOUT_CONTROL);
682 }
683
684 if (!data)
ee53ab5d
PO		 685 return;
686
687 /* Sanity checks */
688 BUG_ON(data->blksz * data->blocks > 524288);
689 BUG_ON(data->blksz > host->mmc->max_blk_size);
690 BUG_ON(data->blocks > 65535);
691
692 host->data = data;
693 host->data_early = 0;
f6a03cbf 694 host->data->bytes_xfered = 0;
ee53ab5d 695
a13abc7b 696 if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA))
c9fddbc4
PO		 697 host->flags |= SDHCI_REQ_USE_DMA;
698
2134a922
PO		 699 /*
700 * FIXME: This doesn't account for merging when mapping the
701 * scatterlist.
702 */
703 if (host->flags & SDHCI_REQ_USE_DMA) {
704 int broken, i;
705 struct scatterlist *sg;
706
707 broken = 0;
708 if (host->flags & SDHCI_USE_ADMA) {
709 if (host->quirks & SDHCI_QUIRK_32BIT_ADMA_SIZE)
710 broken = 1;
711 } else {
712 if (host->quirks & SDHCI_QUIRK_32BIT_DMA_SIZE)
713 broken = 1;
714 }
715
716 if (unlikely(broken)) {
717 for_each_sg(data->sg, sg, data->sg_len, i) {
718 if (sg->length & 0x3) {
719 DBG("Reverting to PIO because of "
720 "transfer size (%d)\n",
721 sg->length);
722 host->flags &= ~SDHCI_REQ_USE_DMA;
723 break;
724 }
725 }
726 }
c9fddbc4
PO		 727 }
728
729 /*
730 * The assumption here being that alignment is the same after
731 * translation to device address space.
732 */
2134a922
PO		 733 if (host->flags & SDHCI_REQ_USE_DMA) {
734 int broken, i;
735 struct scatterlist *sg;
736
737 broken = 0;
738 if (host->flags & SDHCI_USE_ADMA) {
739 /*
740 * As we use 3 byte chunks to work around
741 * alignment problems, we need to check this
742 * quirk.
743 */
744 if (host->quirks & SDHCI_QUIRK_32BIT_ADMA_SIZE)
745 broken = 1;
746 } else {
747 if (host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR)
748 broken = 1;
749 }
750
751 if (unlikely(broken)) {
752 for_each_sg(data->sg, sg, data->sg_len, i) {
753 if (sg->offset & 0x3) {
754 DBG("Reverting to PIO because of "
755 "bad alignment\n");
756 host->flags &= ~SDHCI_REQ_USE_DMA;
757 break;
758 }
759 }
760 }
761 }
762
8f1934ce
PO		 763 if (host->flags & SDHCI_REQ_USE_DMA) {
764 if (host->flags & SDHCI_USE_ADMA) {
765 ret = sdhci_adma_table_pre(host, data);
766 if (ret) {
767 /*
768 * This only happens when someone fed
769 * us an invalid request.
770 */
771 WARN_ON(1);
ebd6d357 772 host->flags &= ~SDHCI_REQ_USE_DMA;
8f1934ce 773 } else {
4e4141a5
AV		 774 sdhci_writel(host, host->adma_addr,
775 SDHCI_ADMA_ADDRESS);
8f1934ce
PO		 776 }
777 } else {
c8b3e02e 778 int sg_cnt;
8f1934ce 779
c8b3e02e 780 sg_cnt = dma_map_sg(mmc_dev(host->mmc),
8f1934ce
PO		 781 data->sg, data->sg_len,
782 (data->flags & MMC_DATA_READ) ?
783 DMA_FROM_DEVICE :
784 DMA_TO_DEVICE);
c8b3e02e 785 if (sg_cnt == 0) {
8f1934ce
PO		 786 /*
787 * This only happens when someone fed
788 * us an invalid request.
789 */
790 WARN_ON(1);
ebd6d357 791 host->flags &= ~SDHCI_REQ_USE_DMA;
8f1934ce 792 } else {
719a61b4 793 WARN_ON(sg_cnt != 1);
4e4141a5
AV		 794 sdhci_writel(host, sg_dma_address(data->sg),
795 SDHCI_DMA_ADDRESS);
8f1934ce
PO		 796 }
797 }
798 }
799
2134a922
PO		 800 /*
801 * Always adjust the DMA selection as some controllers
802 * (e.g. JMicron) can't do PIO properly when the selection
803 * is ADMA.
804 */
805 if (host->version >= SDHCI_SPEC_200) {
4e4141a5 806 ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
2134a922
PO		 807 ctrl &= ~SDHCI_CTRL_DMA_MASK;
808 if ((host->flags & SDHCI_REQ_USE_DMA) &&
809 (host->flags & SDHCI_USE_ADMA))
810 ctrl |= SDHCI_CTRL_ADMA32;
811 else
812 ctrl |= SDHCI_CTRL_SDMA;
4e4141a5 813 sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
c9fddbc4
PO		 814 }
815
8f1934ce 816 if (!(host->flags & SDHCI_REQ_USE_DMA)) {
da60a91d
SAS		 817 int flags;
818
819 flags = SG_MITER_ATOMIC;
820 if (host->data->flags & MMC_DATA_READ)
821 flags |= SG_MITER_TO_SG;
822 else
823 flags |= SG_MITER_FROM_SG;
824 sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
7659150c 825 host->blocks = data->blocks;
d129bceb 826 }
c7fa9963 827
6aa943ab
AV		 828 sdhci_set_transfer_irqs(host);
829
f6a03cbf
MV		 830 /* Set the DMA boundary value and block size */
831 sdhci_writew(host, SDHCI_MAKE_BLKSZ(SDHCI_DEFAULT_BOUNDARY_ARG,
832 data->blksz), SDHCI_BLOCK_SIZE);
4e4141a5 833 sdhci_writew(host, data->blocks, SDHCI_BLOCK_COUNT);
c7fa9963
PO		 834}
835
836static void sdhci_set_transfer_mode(struct sdhci_host *host,
837 struct mmc_data *data)
838{
839 u16 mode;
840
c7fa9963
PO		 841 if (data == NULL)
842 return;
843
e538fbe8
PO		 844 WARN_ON(!host->data);
845
c7fa9963 846 mode = SDHCI_TRNS_BLK_CNT_EN;
c4512f79
JH		 847 if (data->blocks > 1) {
848 if (host->quirks & SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12)
849 mode |= SDHCI_TRNS_MULTI | SDHCI_TRNS_ACMD12;
850 else
851 mode |= SDHCI_TRNS_MULTI;
852 }
c7fa9963
PO		 853 if (data->flags & MMC_DATA_READ)
854 mode |= SDHCI_TRNS_READ;
c9fddbc4 855 if (host->flags & SDHCI_REQ_USE_DMA)
c7fa9963
PO		 856 mode |= SDHCI_TRNS_DMA;
857
4e4141a5 858 sdhci_writew(host, mode, SDHCI_TRANSFER_MODE);
d129bceb
PO		 859}
860
861static void sdhci_finish_data(struct sdhci_host *host)
862{
863 struct mmc_data *data;
d129bceb
PO		 864
865 BUG_ON(!host->data);
866
867 data = host->data;
868 host->data = NULL;
869
c9fddbc4 870 if (host->flags & SDHCI_REQ_USE_DMA) {
2134a922
PO		 871 if (host->flags & SDHCI_USE_ADMA)
872 sdhci_adma_table_post(host, data);
873 else {
874 dma_unmap_sg(mmc_dev(host->mmc), data->sg,
875 data->sg_len, (data->flags & MMC_DATA_READ) ?
876 DMA_FROM_DEVICE : DMA_TO_DEVICE);
877 }
d129bceb
PO		 878 }
879
880 /*
c9b74c5b
PO		 881 * The specification states that the block count register must
882 * be updated, but it does not specify at what point in the
883 * data flow. That makes the register entirely useless to read
884 * back so we have to assume that nothing made it to the card
885 * in the event of an error.
d129bceb 886 */
c9b74c5b
PO		 887 if (data->error)
888 data->bytes_xfered = 0;
d129bceb 889 else
c9b74c5b 890 data->bytes_xfered = data->blksz * data->blocks;
d129bceb 891
d129bceb
PO		 892 if (data->stop) {
893 /*
894 * The controller needs a reset of internal state machines
895 * upon error conditions.
896 */
17b0429d 897 if (data->error) {
d129bceb
PO		 898 sdhci_reset(host, SDHCI_RESET_CMD);
899 sdhci_reset(host, SDHCI_RESET_DATA);
900 }
901
902 sdhci_send_command(host, data->stop);
903 } else
904 tasklet_schedule(&host->finish_tasklet);
905}
906
907static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
908{
909 int flags;
fd2208d7 910 u32 mask;
7cb2c76f 911 unsigned long timeout;
d129bceb
PO		 912
913 WARN_ON(host->cmd);
914
d129bceb 915 /* Wait max 10 ms */
7cb2c76f 916 timeout = 10;
fd2208d7
PO		 917
918 mask = SDHCI_CMD_INHIBIT;
919 if ((cmd->data != NULL) || (cmd->flags & MMC_RSP_BUSY))
920 mask |= SDHCI_DATA_INHIBIT;
921
922 /* We shouldn't wait for data inihibit for stop commands, even
923 though they might use busy signaling */
924 if (host->mrq->data && (cmd == host->mrq->data->stop))
925 mask &= ~SDHCI_DATA_INHIBIT;
926
4e4141a5 927 while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
7cb2c76f 928 if (timeout == 0) {
d129bceb 929 printk(KERN_ERR "%s: Controller never released "
acf1da45 930 "inhibit bit(s).\n", mmc_hostname(host->mmc));
d129bceb 931 sdhci_dumpregs(host);
17b0429d 932 cmd->error = -EIO;
d129bceb
PO		 933 tasklet_schedule(&host->finish_tasklet);
934 return;
935 }
7cb2c76f
PO		 936 timeout--;
937 mdelay(1);
938 }
d129bceb
PO		 939
940 mod_timer(&host->timer, jiffies + 10 * HZ);
941
942 host->cmd = cmd;
943
a3c7778f 944 sdhci_prepare_data(host, cmd);
d129bceb 945
4e4141a5 946 sdhci_writel(host, cmd->arg, SDHCI_ARGUMENT);
d129bceb 947
c7fa9963
PO		 948 sdhci_set_transfer_mode(host, cmd->data);
949
d129bceb 950 if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) {
acf1da45 951 printk(KERN_ERR "%s: Unsupported response type!\n",
d129bceb 952 mmc_hostname(host->mmc));
17b0429d 953 cmd->error = -EINVAL;
d129bceb
PO		 954 tasklet_schedule(&host->finish_tasklet);
955 return;
956 }
957
958 if (!(cmd->flags & MMC_RSP_PRESENT))
959 flags = SDHCI_CMD_RESP_NONE;
960 else if (cmd->flags & MMC_RSP_136)
961 flags = SDHCI_CMD_RESP_LONG;
962 else if (cmd->flags & MMC_RSP_BUSY)
963 flags = SDHCI_CMD_RESP_SHORT_BUSY;
964 else
965 flags = SDHCI_CMD_RESP_SHORT;
966
967 if (cmd->flags & MMC_RSP_CRC)
968 flags |= SDHCI_CMD_CRC;
969 if (cmd->flags & MMC_RSP_OPCODE)
970 flags |= SDHCI_CMD_INDEX;
971 if (cmd->data)
972 flags |= SDHCI_CMD_DATA;
973
4e4141a5 974 sdhci_writew(host, SDHCI_MAKE_CMD(cmd->opcode, flags), SDHCI_COMMAND);
d129bceb
PO		 975}
976
977static void sdhci_finish_command(struct sdhci_host *host)
978{
979 int i;
980
981 BUG_ON(host->cmd == NULL);
982
983 if (host->cmd->flags & MMC_RSP_PRESENT) {
984 if (host->cmd->flags & MMC_RSP_136) {
985 /* CRC is stripped so we need to do some shifting. */
986 for (i = 0;i < 4;i++) {
4e4141a5 987 host->cmd->resp[i] = sdhci_readl(host,
d129bceb
PO		 988 SDHCI_RESPONSE + (3-i)*4) << 8;
989 if (i != 3)
990 host->cmd->resp[i] |=
4e4141a5 991 sdhci_readb(host,
d129bceb
PO		 992 SDHCI_RESPONSE + (3-i)*4-1);
993 }
994 } else {
4e4141a5 995 host->cmd->resp[0] = sdhci_readl(host, SDHCI_RESPONSE);
d129bceb
PO		 996 }
997 }
998
17b0429d 999 host->cmd->error = 0;
d129bceb 1000
e538fbe8
PO		 1001 if (host->data && host->data_early)
1002 sdhci_finish_data(host);
1003
1004 if (!host->cmd->data)
d129bceb
PO		 1005 tasklet_schedule(&host->finish_tasklet);
1006
1007 host->cmd = NULL;
1008}
1009
1010static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
1011{
1012 int div;
1013 u16 clk;
7cb2c76f 1014 unsigned long timeout;
d129bceb
PO		 1015
1016 if (clock == host->clock)
1017 return;
1018
8114634c
AV		 1019 if (host->ops->set_clock) {
1020 host->ops->set_clock(host, clock);
1021 if (host->quirks & SDHCI_QUIRK_NONSTANDARD_CLOCK)
1022 return;
1023 }
1024
4e4141a5 1025 sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
d129bceb
PO		 1026
1027 if (clock == 0)
1028 goto out;
1029
85105c53
ZG		 1030 if (host->version >= SDHCI_SPEC_300) {
1031 /* Version 3.00 divisors must be a multiple of 2. */
1032 if (host->max_clk <= clock)
1033 div = 1;
1034 else {
0397526d 1035 for (div = 2; div < SDHCI_MAX_DIV_SPEC_300; div += 2) {
85105c53
ZG		 1036 if ((host->max_clk / div) <= clock)
1037 break;
1038 }
1039 }
1040 } else {
1041 /* Version 2.00 divisors must be a power of 2. */
0397526d 1042 for (div = 1; div < SDHCI_MAX_DIV_SPEC_200; div *= 2) {
85105c53
ZG		 1043 if ((host->max_clk / div) <= clock)
1044 break;
1045 }
d129bceb
PO		 1046 }
1047 div >>= 1;
1048
85105c53
ZG		 1049 clk = (div & SDHCI_DIV_MASK) << SDHCI_DIVIDER_SHIFT;
1050 clk |= ((div & SDHCI_DIV_HI_MASK) >> SDHCI_DIV_MASK_LEN)
1051 << SDHCI_DIVIDER_HI_SHIFT;
d129bceb 1052 clk |= SDHCI_CLOCK_INT_EN;
4e4141a5 1053 sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
d129bceb 1054
27f6cb16
CB		 1055 /* Wait max 20 ms */
1056 timeout = 20;
4e4141a5 1057 while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
7cb2c76f
PO		 1058 & SDHCI_CLOCK_INT_STABLE)) {
1059 if (timeout == 0) {
acf1da45
PO		 1060 printk(KERN_ERR "%s: Internal clock never "
1061 "stabilised.\n", mmc_hostname(host->mmc));
d129bceb
PO		 1062 sdhci_dumpregs(host);
1063 return;
1064 }
7cb2c76f
PO		 1065 timeout--;
1066 mdelay(1);
1067 }
d129bceb
PO		 1068
1069 clk |= SDHCI_CLOCK_CARD_EN;
4e4141a5 1070 sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
d129bceb
PO		 1071
1072out:
1073 host->clock = clock;
1074}
1075
146ad66e
PO		 1076static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
1077{
8364248a 1078 u8 pwr = 0;
146ad66e 1079
8364248a 1080 if (power != (unsigned short)-1) {
ae628903
PO		 1081 switch (1 << power) {
1082 case MMC_VDD_165_195:
1083 pwr = SDHCI_POWER_180;
1084 break;
1085 case MMC_VDD_29_30:
1086 case MMC_VDD_30_31:
1087 pwr = SDHCI_POWER_300;
1088 break;
1089 case MMC_VDD_32_33:
1090 case MMC_VDD_33_34:
1091 pwr = SDHCI_POWER_330;
1092 break;
1093 default:
1094 BUG();
1095 }
1096 }
1097
1098 if (host->pwr == pwr)
146ad66e
PO		 1099 return;
1100
ae628903
PO		 1101 host->pwr = pwr;
1102
1103 if (pwr == 0) {
4e4141a5 1104 sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
ae628903 1105 return;
9e9dc5f2
DS		 1106 }
1107
1108 /*
1109 * Spec says that we should clear the power reg before setting
1110 * a new value. Some controllers don't seem to like this though.
1111 */
b8c86fc5 1112 if (!(host->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE))
4e4141a5 1113 sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
146ad66e 1114
e08c1694 1115 /*
c71f6512 1116 * At least the Marvell CaFe chip gets confused if we set the voltage
e08c1694
AS		 1117 * and set turn on power at the same time, so set the voltage first.
1118 */
11a2f1b7 1119 if (host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER)
ae628903 1120 sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
e08c1694 1121
ae628903 1122 pwr |= SDHCI_POWER_ON;
146ad66e 1123
ae628903 1124 sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
557b0697
HW		 1125
1126 /*
1127 * Some controllers need an extra 10ms delay of 10ms before they
1128 * can apply clock after applying power
1129 */
11a2f1b7 1130 if (host->quirks & SDHCI_QUIRK_DELAY_AFTER_POWER)
557b0697 1131 mdelay(10);
146ad66e
PO		 1132}
1133
d129bceb
PO		 1134/*****************************************************************************\
1135 * *
1136 * MMC callbacks *
1137 * *
1138\*****************************************************************************/
1139
1140static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
1141{
1142 struct sdhci_host *host;
68d1fb7e 1143 bool present;
d129bceb
PO		 1144 unsigned long flags;
1145
1146 host = mmc_priv(mmc);
1147
1148 spin_lock_irqsave(&host->lock, flags);
1149
1150 WARN_ON(host->mrq != NULL);
1151
f9134319 1152#ifndef SDHCI_USE_LEDS_CLASS
d129bceb 1153 sdhci_activate_led(host);
2f730fec 1154#endif
c4512f79
JH		 1155 if (host->quirks & SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12) {
1156 if (mrq->stop) {
1157 mrq->data->stop = NULL;
1158 mrq->stop = NULL;
1159 }
1160 }
d129bceb
PO		 1161
1162 host->mrq = mrq;
1163
68d1fb7e
AV		 1164 /* If polling, assume that the card is always present. */
1165 if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION)
1166 present = true;
1167 else
1168 present = sdhci_readl(host, SDHCI_PRESENT_STATE) &
1169 SDHCI_CARD_PRESENT;
1170
1171 if (!present || host->flags & SDHCI_DEVICE_DEAD) {
17b0429d 1172 host->mrq->cmd->error = -ENOMEDIUM;
d129bceb
PO		 1173 tasklet_schedule(&host->finish_tasklet);
1174 } else
1175 sdhci_send_command(host, mrq->cmd);
1176
5f25a66f 1177 mmiowb();
d129bceb
PO		 1178 spin_unlock_irqrestore(&host->lock, flags);
1179}
1180
1181static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
1182{
1183 struct sdhci_host *host;
1184 unsigned long flags;
1185 u8 ctrl;
1186
1187 host = mmc_priv(mmc);
1188
1189 spin_lock_irqsave(&host->lock, flags);
1190
1e72859e
PO		 1191 if (host->flags & SDHCI_DEVICE_DEAD)
1192 goto out;
1193
d129bceb
PO		 1194 /*
1195 * Reset the chip on each power off.
1196 * Should clear out any weird states.
1197 */
1198 if (ios->power_mode == MMC_POWER_OFF) {
4e4141a5 1199 sdhci_writel(host, 0, SDHCI_SIGNAL_ENABLE);
7260cf5e 1200 sdhci_reinit(host);
d129bceb
PO		 1201 }
1202
1203 sdhci_set_clock(host, ios->clock);
1204
1205 if (ios->power_mode == MMC_POWER_OFF)
146ad66e 1206 sdhci_set_power(host, -1);
d129bceb 1207 else
146ad66e 1208 sdhci_set_power(host, ios->vdd);
d129bceb 1209
643a81ff
PR		 1210 if (host->ops->platform_send_init_74_clocks)
1211 host->ops->platform_send_init_74_clocks(host, ios->power_mode);
1212
15ec4461
PR		 1213 /*
1214 * If your platform has 8-bit width support but is not a v3 controller,
1215 * or if it requires special setup code, you should implement that in
1216 * platform_8bit_width().
1217 */
1218 if (host->ops->platform_8bit_width)
1219 host->ops->platform_8bit_width(host, ios->bus_width);
1220 else {
1221 ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
1222 if (ios->bus_width == MMC_BUS_WIDTH_8) {
1223 ctrl &= ~SDHCI_CTRL_4BITBUS;
1224 if (host->version >= SDHCI_SPEC_300)
1225 ctrl |= SDHCI_CTRL_8BITBUS;
1226 } else {
1227 if (host->version >= SDHCI_SPEC_300)
1228 ctrl &= ~SDHCI_CTRL_8BITBUS;
1229 if (ios->bus_width == MMC_BUS_WIDTH_4)
1230 ctrl |= SDHCI_CTRL_4BITBUS;
1231 else
1232 ctrl &= ~SDHCI_CTRL_4BITBUS;
1233 }
1234 sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
1235 }
ae6d6c92 1236
15ec4461 1237 ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
cd9277c0 1238
3ab9c8da
PR		 1239 if ((ios->timing == MMC_TIMING_SD_HS ||
1240 ios->timing == MMC_TIMING_MMC_HS)
1241 && !(host->quirks & SDHCI_QUIRK_NO_HISPD_BIT))
cd9277c0
PO		 1242 ctrl |= SDHCI_CTRL_HISPD;
1243 else
1244 ctrl &= ~SDHCI_CTRL_HISPD;
1245
4e4141a5 1246 sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
d129bceb 1247
d6d50a15
AN		 1248 if (host->version >= SDHCI_SPEC_300) {
1249 u16 ctrl_2;
1250
1251 ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
1252 if (!(ctrl_2 & SDHCI_CTRL_PRESET_VAL_ENABLE)) {
1253 /*
1254 * We only need to set Driver Strength if the
1255 * preset value enable is not set.
1256 */
1257 ctrl_2 &= ~SDHCI_CTRL_DRV_TYPE_MASK;
1258 if (ios->drv_type == MMC_SET_DRIVER_TYPE_A)
1259 ctrl_2 |= SDHCI_CTRL_DRV_TYPE_A;
1260 else if (ios->drv_type == MMC_SET_DRIVER_TYPE_C)
1261 ctrl_2 |= SDHCI_CTRL_DRV_TYPE_C;
1262
1263 sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
1264 }
1265 }
1266
b8352260
LD		 1267 /*
1268 * Some (ENE) controllers go apeshit on some ios operation,
1269 * signalling timeout and CRC errors even on CMD0. Resetting
1270 * it on each ios seems to solve the problem.
1271 */
b8c86fc5 1272 if(host->quirks & SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS)
b8352260
LD		 1273 sdhci_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
1274
1e72859e 1275out:
5f25a66f 1276 mmiowb();
d129bceb
PO		 1277 spin_unlock_irqrestore(&host->lock, flags);
1278}
1279
82b0e23a 1280static int check_ro(struct sdhci_host *host)
d129bceb 1281{
d129bceb 1282 unsigned long flags;
2dfb579c 1283 int is_readonly;
d129bceb 1284
d129bceb
PO		 1285 spin_lock_irqsave(&host->lock, flags);
1286
1e72859e 1287 if (host->flags & SDHCI_DEVICE_DEAD)
2dfb579c
WS		 1288 is_readonly = 0;
1289 else if (host->ops->get_ro)
1290 is_readonly = host->ops->get_ro(host);
1e72859e 1291 else
2dfb579c
WS		 1292 is_readonly = !(sdhci_readl(host, SDHCI_PRESENT_STATE)
1293 & SDHCI_WRITE_PROTECT);
d129bceb
PO		 1294
1295 spin_unlock_irqrestore(&host->lock, flags);
1296
2dfb579c
WS		 1297 /* This quirk needs to be replaced by a callback-function later */
1298 return host->quirks & SDHCI_QUIRK_INVERTED_WRITE_PROTECT ?
1299 !is_readonly : is_readonly;
d129bceb
PO		 1300}
1301
82b0e23a
TI		 1302#define SAMPLE_COUNT 5
1303
1304static int sdhci_get_ro(struct mmc_host *mmc)
1305{
1306 struct sdhci_host *host;
1307 int i, ro_count;
1308
1309 host = mmc_priv(mmc);
1310
1311 if (!(host->quirks & SDHCI_QUIRK_UNSTABLE_RO_DETECT))
1312 return check_ro(host);
1313
1314 ro_count = 0;
1315 for (i = 0; i < SAMPLE_COUNT; i++) {
1316 if (check_ro(host)) {
1317 if (++ro_count > SAMPLE_COUNT / 2)
1318 return 1;
1319 }
1320 msleep(30);
1321 }
1322 return 0;
1323}
1324
f75979b7
PO		 1325static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable)
1326{
1327 struct sdhci_host *host;
1328 unsigned long flags;
f75979b7
PO		 1329
1330 host = mmc_priv(mmc);
1331
1332 spin_lock_irqsave(&host->lock, flags);
1333
1e72859e
PO		 1334 if (host->flags & SDHCI_DEVICE_DEAD)
1335 goto out;
1336
f75979b7 1337 if (enable)
7260cf5e
AV		 1338 sdhci_unmask_irqs(host, SDHCI_INT_CARD_INT);
1339 else
1340 sdhci_mask_irqs(host, SDHCI_INT_CARD_INT);
1e72859e 1341out:
f75979b7
PO		 1342 mmiowb();
1343
1344 spin_unlock_irqrestore(&host->lock, flags);
1345}
1346
f2119df6
AN		 1347static int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
1348 struct mmc_ios *ios)
1349{
1350 struct sdhci_host *host;
1351 u8 pwr;
1352 u16 clk, ctrl;
1353 u32 present_state;
1354
1355 host = mmc_priv(mmc);
1356
1357 /*
1358 * Signal Voltage Switching is only applicable for Host Controllers
1359 * v3.00 and above.
1360 */
1361 if (host->version < SDHCI_SPEC_300)
1362 return 0;
1363
1364 /*
1365 * We first check whether the request is to set signalling voltage
1366 * to 3.3V. If so, we change the voltage to 3.3V and return quickly.
1367 */
1368 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
1369 if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) {
1370 /* Set 1.8V Signal Enable in the Host Control2 register to 0 */
1371 ctrl &= ~SDHCI_CTRL_VDD_180;
1372 sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
1373
1374 /* Wait for 5ms */
1375 usleep_range(5000, 5500);
1376
1377 /* 3.3V regulator output should be stable within 5 ms */
1378 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
1379 if (!(ctrl & SDHCI_CTRL_VDD_180))
1380 return 0;
1381 else {
1382 printk(KERN_INFO DRIVER_NAME ": Switching to 3.3V "
1383 "signalling voltage failed\n");
1384 return -EIO;
1385 }
1386 } else if (!(ctrl & SDHCI_CTRL_VDD_180) &&
1387 (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180)) {
1388 /* Stop SDCLK */
1389 clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
1390 clk &= ~SDHCI_CLOCK_CARD_EN;
1391 sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
1392
1393 /* Check whether DAT[3:0] is 0000 */
1394 present_state = sdhci_readl(host, SDHCI_PRESENT_STATE);
1395 if (!((present_state & SDHCI_DATA_LVL_MASK) >>
1396 SDHCI_DATA_LVL_SHIFT)) {
1397 /*
1398 * Enable 1.8V Signal Enable in the Host Control2
1399 * register
1400 */
1401 ctrl |= SDHCI_CTRL_VDD_180;
1402 sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
1403
1404 /* Wait for 5ms */
1405 usleep_range(5000, 5500);
1406
1407 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
1408 if (ctrl & SDHCI_CTRL_VDD_180) {
1409 /* Provide SDCLK again and wait for 1ms*/
1410 clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
1411 clk |= SDHCI_CLOCK_CARD_EN;
1412 sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
1413 usleep_range(1000, 1500);
1414
1415 /*
1416 * If DAT[3:0] level is 1111b, then the card
1417 * was successfully switched to 1.8V signaling.
1418 */
1419 present_state = sdhci_readl(host,
1420 SDHCI_PRESENT_STATE);
1421 if ((present_state & SDHCI_DATA_LVL_MASK) ==
1422 SDHCI_DATA_LVL_MASK)
1423 return 0;
1424 }
1425 }
1426
1427 /*
1428 * If we are here, that means the switch to 1.8V signaling
1429 * failed. We power cycle the card, and retry initialization
1430 * sequence by setting S18R to 0.
1431 */
1432 pwr = sdhci_readb(host, SDHCI_POWER_CONTROL);
1433 pwr &= ~SDHCI_POWER_ON;
1434 sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
1435
1436 /* Wait for 1ms as per the spec */
1437 usleep_range(1000, 1500);
1438 pwr |= SDHCI_POWER_ON;
1439 sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
1440
1441 printk(KERN_INFO DRIVER_NAME ": Switching to 1.8V signalling "
1442 "voltage failed, retrying with S18R set to 0\n");
1443 return -EAGAIN;
1444 } else
1445 /* No signal voltage switch required */
1446 return 0;
1447}
1448
ab7aefd0 1449static const struct mmc_host_ops sdhci_ops = {
d129bceb
PO		 1450 .request = sdhci_request,
1451 .set_ios = sdhci_set_ios,
1452 .get_ro = sdhci_get_ro,
f75979b7 1453 .enable_sdio_irq = sdhci_enable_sdio_irq,
f2119df6 1454 .start_signal_voltage_switch = sdhci_start_signal_voltage_switch,
d129bceb
PO		 1455};
1456
1457/*****************************************************************************\
1458 * *
1459 * Tasklets *
1460 * *
1461\*****************************************************************************/
1462
1463static void sdhci_tasklet_card(unsigned long param)
1464{
1465 struct sdhci_host *host;
1466 unsigned long flags;
1467
1468 host = (struct sdhci_host*)param;
1469
1470 spin_lock_irqsave(&host->lock, flags);
1471
4e4141a5 1472 if (!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)) {
d129bceb
PO		 1473 if (host->mrq) {
1474 printk(KERN_ERR "%s: Card removed during transfer!\n",
1475 mmc_hostname(host->mmc));
1476 printk(KERN_ERR "%s: Resetting controller.\n",
1477 mmc_hostname(host->mmc));
1478
1479 sdhci_reset(host, SDHCI_RESET_CMD);
1480 sdhci_reset(host, SDHCI_RESET_DATA);
1481
17b0429d 1482 host->mrq->cmd->error = -ENOMEDIUM;
d129bceb
PO		 1483 tasklet_schedule(&host->finish_tasklet);
1484 }
1485 }
1486
1487 spin_unlock_irqrestore(&host->lock, flags);
1488
04cf585d 1489 mmc_detect_change(host->mmc, msecs_to_jiffies(200));
d129bceb
PO		 1490}
1491
1492static void sdhci_tasklet_finish(unsigned long param)
1493{
1494 struct sdhci_host *host;
1495 unsigned long flags;
1496 struct mmc_request *mrq;
1497
1498 host = (struct sdhci_host*)param;
1499
0c9c99a7
CB		 1500 /*
1501 * If this tasklet gets rescheduled while running, it will
1502 * be run again afterwards but without any active request.
1503 */
1504 if (!host->mrq)
1505 return;
1506
d129bceb
PO		 1507 spin_lock_irqsave(&host->lock, flags);
1508
1509 del_timer(&host->timer);
1510
1511 mrq = host->mrq;
1512
d129bceb
PO		 1513 /*
1514 * The controller needs a reset of internal state machines
1515 * upon error conditions.
1516 */
1e72859e 1517 if (!(host->flags & SDHCI_DEVICE_DEAD) &&
b7b4d342 1518 ((mrq->cmd && mrq->cmd->error) ||
1e72859e
PO		 1519 (mrq->data && (mrq->data->error ||
1520 (mrq->data->stop && mrq->data->stop->error))) ||
1521 (host->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST))) {
645289dc
PO		 1522
1523 /* Some controllers need this kick or reset won't work here */
b8c86fc5 1524 if (host->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET) {
645289dc
PO		 1525 unsigned int clock;
1526
1527 /* This is to force an update */
1528 clock = host->clock;
1529 host->clock = 0;
1530 sdhci_set_clock(host, clock);
1531 }
1532
1533 /* Spec says we should do both at the same time, but Ricoh
1534 controllers do not like that. */
d129bceb
PO		 1535 sdhci_reset(host, SDHCI_RESET_CMD);
1536 sdhci_reset(host, SDHCI_RESET_DATA);
1537 }
1538
1539 host->mrq = NULL;
1540 host->cmd = NULL;
1541 host->data = NULL;
1542
f9134319 1543#ifndef SDHCI_USE_LEDS_CLASS
d129bceb 1544 sdhci_deactivate_led(host);
2f730fec 1545#endif
d129bceb 1546
5f25a66f 1547 mmiowb();
d129bceb
PO		 1548 spin_unlock_irqrestore(&host->lock, flags);
1549
1550 mmc_request_done(host->mmc, mrq);
1551}
1552
1553static void sdhci_timeout_timer(unsigned long data)
1554{
1555 struct sdhci_host *host;
1556 unsigned long flags;
1557
1558 host = (struct sdhci_host*)data;
1559
1560 spin_lock_irqsave(&host->lock, flags);
1561
1562 if (host->mrq) {
acf1da45
PO		 1563 printk(KERN_ERR "%s: Timeout waiting for hardware "
1564 "interrupt.\n", mmc_hostname(host->mmc));
d129bceb
PO		 1565 sdhci_dumpregs(host);
1566
1567 if (host->data) {
17b0429d 1568 host->data->error = -ETIMEDOUT;
d129bceb
PO		 1569 sdhci_finish_data(host);
1570 } else {
1571 if (host->cmd)
17b0429d 1572 host->cmd->error = -ETIMEDOUT;
d129bceb 1573 else
17b0429d 1574 host->mrq->cmd->error = -ETIMEDOUT;
d129bceb
PO		 1575
1576 tasklet_schedule(&host->finish_tasklet);
1577 }
1578 }
1579
5f25a66f 1580 mmiowb();
d129bceb
PO		 1581 spin_unlock_irqrestore(&host->lock, flags);
1582}
1583
1584/*****************************************************************************\
1585 * *
1586 * Interrupt handling *
1587 * *
1588\*****************************************************************************/
1589
1590static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask)
1591{
1592 BUG_ON(intmask == 0);
1593
1594 if (!host->cmd) {
b67ac3f3
PO		 1595 printk(KERN_ERR "%s: Got command interrupt 0x%08x even "
1596 "though no command operation was in progress.\n",
1597 mmc_hostname(host->mmc), (unsigned)intmask);
d129bceb
PO		 1598 sdhci_dumpregs(host);
1599 return;
1600 }
1601
43b58b36 1602 if (intmask & SDHCI_INT_TIMEOUT)
17b0429d
PO		 1603 host->cmd->error = -ETIMEDOUT;
1604 else if (intmask & (SDHCI_INT_CRC | SDHCI_INT_END_BIT |
1605 SDHCI_INT_INDEX))
1606 host->cmd->error = -EILSEQ;
43b58b36 1607
e809517f 1608 if (host->cmd->error) {
d129bceb 1609 tasklet_schedule(&host->finish_tasklet);
e809517f
PO		 1610 return;
1611 }
1612
1613 /*
1614 * The host can send and interrupt when the busy state has
1615 * ended, allowing us to wait without wasting CPU cycles.
1616 * Unfortunately this is overloaded on the "data complete"
1617 * interrupt, so we need to take some care when handling
1618 * it.
1619 *
1620 * Note: The 1.0 specification is a bit ambiguous about this
1621 * feature so there might be some problems with older
1622 * controllers.
1623 */
1624 if (host->cmd->flags & MMC_RSP_BUSY) {
1625 if (host->cmd->data)
1626 DBG("Cannot wait for busy signal when also "
1627 "doing a data transfer");
f945405c 1628 else if (!(host->quirks & SDHCI_QUIRK_NO_BUSY_IRQ))
e809517f 1629 return;
f945405c
BD		 1630
1631 /* The controller does not support the end-of-busy IRQ,
1632 * fall through and take the SDHCI_INT_RESPONSE */
e809517f
PO		 1633 }
1634
1635 if (intmask & SDHCI_INT_RESPONSE)
43b58b36 1636 sdhci_finish_command(host);
d129bceb
PO		 1637}
1638
0957c333 1639#ifdef CONFIG_MMC_DEBUG
6882a8c0
BD		 1640static void sdhci_show_adma_error(struct sdhci_host *host)
1641{
1642 const char *name = mmc_hostname(host->mmc);
1643 u8 *desc = host->adma_desc;
1644 __le32 *dma;
1645 __le16 *len;
1646 u8 attr;
1647
1648 sdhci_dumpregs(host);
1649
1650 while (true) {
1651 dma = (__le32 *)(desc + 4);
1652 len = (__le16 *)(desc + 2);
1653 attr = *desc;
1654
1655 DBG("%s: %p: DMA 0x%08x, LEN 0x%04x, Attr=0x%02x\n",
1656 name, desc, le32_to_cpu(*dma), le16_to_cpu(*len), attr);
1657
1658 desc += 8;
1659
1660 if (attr & 2)
1661 break;
1662 }
1663}
1664#else
1665static void sdhci_show_adma_error(struct sdhci_host *host) { }
1666#endif
1667
d129bceb
PO		 1668static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
1669{
1670 BUG_ON(intmask == 0);
1671
1672 if (!host->data) {
1673 /*
e809517f
PO		 1674 * The "data complete" interrupt is also used to
1675 * indicate that a busy state has ended. See comment
1676 * above in sdhci_cmd_irq().
d129bceb 1677 */
e809517f
PO		 1678 if (host->cmd && (host->cmd->flags & MMC_RSP_BUSY)) {
1679 if (intmask & SDHCI_INT_DATA_END) {
1680 sdhci_finish_command(host);
1681 return;
1682 }
1683 }
d129bceb 1684
b67ac3f3
PO		 1685 printk(KERN_ERR "%s: Got data interrupt 0x%08x even "
1686 "though no data operation was in progress.\n",
1687 mmc_hostname(host->mmc), (unsigned)intmask);
d129bceb
PO		 1688 sdhci_dumpregs(host);
1689
1690 return;
1691 }
1692
1693 if (intmask & SDHCI_INT_DATA_TIMEOUT)
17b0429d 1694 host->data->error = -ETIMEDOUT;
22113efd
AL		 1695 else if (intmask & SDHCI_INT_DATA_END_BIT)
1696 host->data->error = -EILSEQ;
1697 else if ((intmask & SDHCI_INT_DATA_CRC) &&
1698 SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND))
1699 != MMC_BUS_TEST_R)
17b0429d 1700 host->data->error = -EILSEQ;
6882a8c0
BD		 1701 else if (intmask & SDHCI_INT_ADMA_ERROR) {
1702 printk(KERN_ERR "%s: ADMA error\n", mmc_hostname(host->mmc));
1703 sdhci_show_adma_error(host);
2134a922 1704 host->data->error = -EIO;
6882a8c0 1705 }
d129bceb 1706
17b0429d 1707 if (host->data->error)
d129bceb
PO		 1708 sdhci_finish_data(host);
1709 else {
a406f5a3 1710 if (intmask & (SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL))
d129bceb
PO		 1711 sdhci_transfer_pio(host);
1712
6ba736a1
PO		 1713 /*
1714 * We currently don't do anything fancy with DMA
1715 * boundaries, but as we can't disable the feature
1716 * we need to at least restart the transfer.
f6a03cbf
MV		 1717 *
1718 * According to the spec sdhci_readl(host, SDHCI_DMA_ADDRESS)
1719 * should return a valid address to continue from, but as
1720 * some controllers are faulty, don't trust them.
6ba736a1 1721 */
f6a03cbf
MV		 1722 if (intmask & SDHCI_INT_DMA_END) {
1723 u32 dmastart, dmanow;
1724 dmastart = sg_dma_address(host->data->sg);
1725 dmanow = dmastart + host->data->bytes_xfered;
1726 /*
1727 * Force update to the next DMA block boundary.
1728 */
1729 dmanow = (dmanow &
1730 ~(SDHCI_DEFAULT_BOUNDARY_SIZE - 1)) +
1731 SDHCI_DEFAULT_BOUNDARY_SIZE;
1732 host->data->bytes_xfered = dmanow - dmastart;
1733 DBG("%s: DMA base 0x%08x, transferred 0x%06x bytes,"
1734 " next 0x%08x\n",
1735 mmc_hostname(host->mmc), dmastart,
1736 host->data->bytes_xfered, dmanow);
1737 sdhci_writel(host, dmanow, SDHCI_DMA_ADDRESS);
1738 }
6ba736a1 1739
e538fbe8
PO		 1740 if (intmask & SDHCI_INT_DATA_END) {
1741 if (host->cmd) {
1742 /*
1743 * Data managed to finish before the
1744 * command completed. Make sure we do
1745 * things in the proper order.
1746 */
1747 host->data_early = 1;
1748 } else {
1749 sdhci_finish_data(host);
1750 }
1751 }
d129bceb
PO		 1752 }
1753}
1754
7d12e780 1755static irqreturn_t sdhci_irq(int irq, void *dev_id)
d129bceb
PO		 1756{
1757 irqreturn_t result;
1758 struct sdhci_host* host = dev_id;
1759 u32 intmask;
f75979b7 1760 int cardint = 0;
d129bceb
PO		 1761
1762 spin_lock(&host->lock);
1763
4e4141a5 1764 intmask = sdhci_readl(host, SDHCI_INT_STATUS);
d129bceb 1765
62df67a5 1766 if (!intmask || intmask == 0xffffffff) {
d129bceb
PO		 1767 result = IRQ_NONE;
1768 goto out;
1769 }
1770
b69c9058
PO		 1771 DBG("*** %s got interrupt: 0x%08x\n",
1772 mmc_hostname(host->mmc), intmask);
d129bceb 1773
3192a28f 1774 if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) {
4e4141a5
AV		 1775 sdhci_writel(host, intmask & (SDHCI_INT_CARD_INSERT |
1776 SDHCI_INT_CARD_REMOVE), SDHCI_INT_STATUS);
d129bceb 1777 tasklet_schedule(&host->card_tasklet);
3192a28f 1778 }
d129bceb 1779
3192a28f 1780 intmask &= ~(SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE);
d129bceb 1781
3192a28f 1782 if (intmask & SDHCI_INT_CMD_MASK) {
4e4141a5
AV		 1783 sdhci_writel(host, intmask & SDHCI_INT_CMD_MASK,
1784 SDHCI_INT_STATUS);
3192a28f 1785 sdhci_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK);
d129bceb
PO		 1786 }
1787
1788 if (intmask & SDHCI_INT_DATA_MASK) {
4e4141a5
AV		 1789 sdhci_writel(host, intmask & SDHCI_INT_DATA_MASK,
1790 SDHCI_INT_STATUS);
3192a28f 1791 sdhci_data_irq(host, intmask & SDHCI_INT_DATA_MASK);
d129bceb
PO		 1792 }
1793
1794 intmask &= ~(SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK);
1795
964f9ce2
PO		 1796 intmask &= ~SDHCI_INT_ERROR;
1797
d129bceb 1798 if (intmask & SDHCI_INT_BUS_POWER) {
3192a28f 1799 printk(KERN_ERR "%s: Card is consuming too much power!\n",
d129bceb 1800 mmc_hostname(host->mmc));
4e4141a5 1801 sdhci_writel(host, SDHCI_INT_BUS_POWER, SDHCI_INT_STATUS);
d129bceb
PO		 1802 }
1803
9d26a5d3 1804 intmask &= ~SDHCI_INT_BUS_POWER;
3192a28f 1805
f75979b7
PO		 1806 if (intmask & SDHCI_INT_CARD_INT)
1807 cardint = 1;
1808
1809 intmask &= ~SDHCI_INT_CARD_INT;
1810
3192a28f 1811 if (intmask) {
acf1da45 1812 printk(KERN_ERR "%s: Unexpected interrupt 0x%08x.\n",
3192a28f 1813 mmc_hostname(host->mmc), intmask);
d129bceb
PO		 1814 sdhci_dumpregs(host);
1815
4e4141a5 1816 sdhci_writel(host, intmask, SDHCI_INT_STATUS);
3192a28f 1817 }
d129bceb
PO		 1818
1819 result = IRQ_HANDLED;
1820
5f25a66f 1821 mmiowb();
d129bceb
PO		 1822out:
1823 spin_unlock(&host->lock);
1824
f75979b7
PO		 1825 /*
1826 * We have to delay this as it calls back into the driver.
1827 */
1828 if (cardint)
1829 mmc_signal_sdio_irq(host->mmc);
1830
d129bceb
PO		 1831 return result;
1832}
1833
1834/*****************************************************************************\
1835 * *
1836 * Suspend/resume *
1837 * *
1838\*****************************************************************************/
1839
1840#ifdef CONFIG_PM
1841
b8c86fc5 1842int sdhci_suspend_host(struct sdhci_host *host, pm_message_t state)
d129bceb 1843{
b8c86fc5 1844 int ret;
a715dfc7 1845
7260cf5e
AV		 1846 sdhci_disable_card_detection(host);
1847
1a13f8fa 1848 ret = mmc_suspend_host(host->mmc);
b8c86fc5
PO		 1849 if (ret)
1850 return ret;
a715dfc7 1851
b8c86fc5 1852 free_irq(host->irq, host);
d129bceb 1853
9bea3c85
MS		 1854 if (host->vmmc)
1855 ret = regulator_disable(host->vmmc);
1856
1857 return ret;
d129bceb
PO		 1858}
1859
b8c86fc5 1860EXPORT_SYMBOL_GPL(sdhci_suspend_host);
d129bceb 1861
b8c86fc5
PO		 1862int sdhci_resume_host(struct sdhci_host *host)
1863{
1864 int ret;
d129bceb 1865
9bea3c85
MS		 1866 if (host->vmmc) {
1867 int ret = regulator_enable(host->vmmc);
1868 if (ret)
1869 return ret;
1870 }
1871
1872
a13abc7b 1873 if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
b8c86fc5
PO		 1874 if (host->ops->enable_dma)
1875 host->ops->enable_dma(host);
1876 }
d129bceb 1877
b8c86fc5
PO		 1878 ret = request_irq(host->irq, sdhci_irq, IRQF_SHARED,
1879 mmc_hostname(host->mmc), host);
df1c4b7b
PO		 1880 if (ret)
1881 return ret;
d129bceb 1882
2f4cbb3d 1883 sdhci_init(host, (host->mmc->pm_flags & MMC_PM_KEEP_POWER));
b8c86fc5
PO		 1884 mmiowb();
1885
1886 ret = mmc_resume_host(host->mmc);
7260cf5e
AV		 1887 sdhci_enable_card_detection(host);
1888
2f4cbb3d 1889 return ret;
d129bceb
PO		 1890}
1891
b8c86fc5 1892EXPORT_SYMBOL_GPL(sdhci_resume_host);
d129bceb 1893
5f619704
DD		 1894void sdhci_enable_irq_wakeups(struct sdhci_host *host)
1895{
1896 u8 val;
1897 val = sdhci_readb(host, SDHCI_WAKE_UP_CONTROL);
1898 val |= SDHCI_WAKE_ON_INT;
1899 sdhci_writeb(host, val, SDHCI_WAKE_UP_CONTROL);
1900}
1901
1902EXPORT_SYMBOL_GPL(sdhci_enable_irq_wakeups);
1903
d129bceb
PO		 1904#endif /* CONFIG_PM */
1905
1906/*****************************************************************************\
1907 * *
b8c86fc5 1908 * Device allocation/registration *
d129bceb
PO		 1909 * *
1910\*****************************************************************************/
1911
b8c86fc5
PO		 1912struct sdhci_host *sdhci_alloc_host(struct device *dev,
1913 size_t priv_size)
d129bceb 1914{
d129bceb
PO		 1915 struct mmc_host *mmc;
1916 struct sdhci_host *host;
1917
b8c86fc5 1918 WARN_ON(dev == NULL);
d129bceb 1919
b8c86fc5 1920 mmc = mmc_alloc_host(sizeof(struct sdhci_host) + priv_size, dev);
d129bceb 1921 if (!mmc)
b8c86fc5 1922 return ERR_PTR(-ENOMEM);
d129bceb
PO		 1923
1924 host = mmc_priv(mmc);
1925 host->mmc = mmc;
1926
b8c86fc5
PO		 1927 return host;
1928}
8a4da143 1929
b8c86fc5 1930EXPORT_SYMBOL_GPL(sdhci_alloc_host);
d129bceb 1931
b8c86fc5
PO		 1932int sdhci_add_host(struct sdhci_host *host)
1933{
1934 struct mmc_host *mmc;
f2119df6
AN		 1935 u32 caps[2];
1936 u32 max_current_caps;
1937 unsigned int ocr_avail;
b8c86fc5 1938 int ret;
d129bceb 1939
b8c86fc5
PO		 1940 WARN_ON(host == NULL);
1941 if (host == NULL)
1942 return -EINVAL;
d129bceb 1943
b8c86fc5 1944 mmc = host->mmc;
d129bceb 1945
b8c86fc5
PO		 1946 if (debug_quirks)
1947 host->quirks = debug_quirks;
d129bceb 1948
d96649ed
PO		 1949 sdhci_reset(host, SDHCI_RESET_ALL);
1950
4e4141a5 1951 host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
2134a922
PO		 1952 host->version = (host->version & SDHCI_SPEC_VER_MASK)
1953 >> SDHCI_SPEC_VER_SHIFT;
85105c53 1954 if (host->version > SDHCI_SPEC_300) {
4a965505 1955 printk(KERN_ERR "%s: Unknown controller version (%d). "
b69c9058 1956 "You may experience problems.\n", mmc_hostname(mmc),
2134a922 1957 host->version);
4a965505
PO		 1958 }
1959
f2119df6 1960 caps[0] = (host->quirks & SDHCI_QUIRK_MISSING_CAPS) ? host->caps :
ccc92c23 1961 sdhci_readl(host, SDHCI_CAPABILITIES);
d129bceb 1962
f2119df6
AN		 1963 caps[1] = (host->version >= SDHCI_SPEC_300) ?
1964 sdhci_readl(host, SDHCI_CAPABILITIES_1) : 0;
1965
b8c86fc5 1966 if (host->quirks & SDHCI_QUIRK_FORCE_DMA)
a13abc7b 1967 host->flags |= SDHCI_USE_SDMA;
f2119df6 1968 else if (!(caps[0] & SDHCI_CAN_DO_SDMA))
a13abc7b 1969 DBG("Controller doesn't have SDMA capability\n");
67435274 1970 else
a13abc7b 1971 host->flags |= SDHCI_USE_SDMA;
d129bceb 1972
b8c86fc5 1973 if ((host->quirks & SDHCI_QUIRK_BROKEN_DMA) &&
a13abc7b 1974 (host->flags & SDHCI_USE_SDMA)) {
cee687ce 1975 DBG("Disabling DMA as it is marked broken\n");
a13abc7b 1976 host->flags &= ~SDHCI_USE_SDMA;
7c168e3d
FT		 1977 }
1978
f2119df6
AN		 1979 if ((host->version >= SDHCI_SPEC_200) &&
1980 (caps[0] & SDHCI_CAN_DO_ADMA2))
a13abc7b 1981 host->flags |= SDHCI_USE_ADMA;
2134a922
PO		 1982
1983 if ((host->quirks & SDHCI_QUIRK_BROKEN_ADMA) &&
1984 (host->flags & SDHCI_USE_ADMA)) {
1985 DBG("Disabling ADMA as it is marked broken\n");
1986 host->flags &= ~SDHCI_USE_ADMA;
1987 }
1988
a13abc7b 1989 if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
b8c86fc5
PO		 1990 if (host->ops->enable_dma) {
1991 if (host->ops->enable_dma(host)) {
1992 printk(KERN_WARNING "%s: No suitable DMA "
1993 "available. Falling back to PIO.\n",
1994 mmc_hostname(mmc));
a13abc7b
RR		 1995 host->flags &=
1996 ~(SDHCI_USE_SDMA | SDHCI_USE_ADMA);
b8c86fc5 1997 }
d129bceb
PO		 1998 }
1999 }
2000
2134a922
PO		 2001 if (host->flags & SDHCI_USE_ADMA) {
2002 /*
2003 * We need to allocate descriptors for all sg entries
2004 * (128) and potentially one alignment transfer for
2005 * each of those entries.
2006 */
2007 host->adma_desc = kmalloc((128 * 2 + 1) * 4, GFP_KERNEL);
2008 host->align_buffer = kmalloc(128 * 4, GFP_KERNEL);
2009 if (!host->adma_desc || !host->align_buffer) {
2010 kfree(host->adma_desc);
2011 kfree(host->align_buffer);
2012 printk(KERN_WARNING "%s: Unable to allocate ADMA "
2013 "buffers. Falling back to standard DMA.\n",
2014 mmc_hostname(mmc));
2015 host->flags &= ~SDHCI_USE_ADMA;
2016 }
2017 }
2018
7659150c
PO		 2019 /*
2020 * If we use DMA, then it's up to the caller to set the DMA
2021 * mask, but PIO does not need the hw shim so we set a new
2022 * mask here in that case.
2023 */
a13abc7b 2024 if (!(host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA))) {
7659150c
PO		 2025 host->dma_mask = DMA_BIT_MASK(64);
2026 mmc_dev(host->mmc)->dma_mask = &host->dma_mask;
2027 }
d129bceb 2028
c4687d5f 2029 if (host->version >= SDHCI_SPEC_300)
f2119df6 2030 host->max_clk = (caps[0] & SDHCI_CLOCK_V3_BASE_MASK)
c4687d5f
ZG		 2031 >> SDHCI_CLOCK_BASE_SHIFT;
2032 else
f2119df6 2033 host->max_clk = (caps[0] & SDHCI_CLOCK_BASE_MASK)
c4687d5f
ZG		 2034 >> SDHCI_CLOCK_BASE_SHIFT;
2035
4240ff0a 2036 host->max_clk *= 1000000;
f27f47ef
AV		 2037 if (host->max_clk == 0 || host->quirks &
2038 SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN) {
4240ff0a
BD		 2039 if (!host->ops->get_max_clock) {
2040 printk(KERN_ERR
2041 "%s: Hardware doesn't specify base clock "
2042 "frequency.\n", mmc_hostname(mmc));
2043 return -ENODEV;
2044 }
2045 host->max_clk = host->ops->get_max_clock(host);
8ef1a143 2046 }
d129bceb 2047
1c8cde92 2048 host->timeout_clk =
f2119df6 2049 (caps[0] & SDHCI_TIMEOUT_CLK_MASK) >> SDHCI_TIMEOUT_CLK_SHIFT;
1c8cde92 2050 if (host->timeout_clk == 0) {
81b39802
AV		 2051 if (host->ops->get_timeout_clock) {
2052 host->timeout_clk = host->ops->get_timeout_clock(host);
2053 } else if (!(host->quirks &
2054 SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) {
4240ff0a
BD		 2055 printk(KERN_ERR
2056 "%s: Hardware doesn't specify timeout clock "
2057 "frequency.\n", mmc_hostname(mmc));
2058 return -ENODEV;
2059 }
1c8cde92 2060 }
f2119df6 2061 if (caps[0] & SDHCI_TIMEOUT_CLK_UNIT)
1c8cde92 2062 host->timeout_clk *= 1000;
d129bceb
PO		 2063
2064 /*
2065 * Set host parameters.
2066 */
2067 mmc->ops = &sdhci_ops;
ce5f036b 2068 if (host->ops->get_min_clock)
a9e58f25 2069 mmc->f_min = host->ops->get_min_clock(host);
0397526d
ZG		 2070 else if (host->version >= SDHCI_SPEC_300)
2071 mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_300;
a9e58f25 2072 else
0397526d 2073 mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_200;
15ec4461 2074
d129bceb 2075 mmc->f_max = host->max_clk;
a3c7778f 2076 mmc->caps |= MMC_CAP_SDIO_IRQ | MMC_CAP_ERASE;
5fe23c7f 2077
15ec4461
PR		 2078 /*
2079 * A controller may support 8-bit width, but the board itself
2080 * might not have the pins brought out. Boards that support
2081 * 8-bit width must set "mmc->caps |= MMC_CAP_8_BIT_DATA;" in
2082 * their platform code before calling sdhci_add_host(), and we
2083 * won't assume 8-bit width for hosts without that CAP.
2084 */
5fe23c7f 2085 if (!(host->quirks & SDHCI_QUIRK_FORCE_1_BIT_DATA))
15ec4461 2086 mmc->caps |= MMC_CAP_4_BIT_DATA;
d129bceb 2087
f2119df6 2088 if (caps[0] & SDHCI_CAN_DO_HISPD)
a29e7e18 2089 mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;
cd9277c0 2090
176d1ed4
JC		 2091 if ((host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) &&
2092 mmc_card_is_removable(mmc))
68d1fb7e
AV		 2093 mmc->caps |= MMC_CAP_NEEDS_POLL;
2094
f2119df6
AN		 2095 /* UHS-I mode(s) supported by the host controller. */
2096 if (host->version >= SDHCI_SPEC_300)
2097 mmc->caps |= MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25;
2098
2099 /* SDR104 supports also implies SDR50 support */
2100 if (caps[1] & SDHCI_SUPPORT_SDR104)
2101 mmc->caps |= MMC_CAP_UHS_SDR104 | MMC_CAP_UHS_SDR50;
2102 else if (caps[1] & SDHCI_SUPPORT_SDR50)
2103 mmc->caps |= MMC_CAP_UHS_SDR50;
2104
2105 if (caps[1] & SDHCI_SUPPORT_DDR50)
2106 mmc->caps |= MMC_CAP_UHS_DDR50;
2107
d6d50a15
AN		 2108 /* Driver Type(s) (A, C, D) supported by the host */
2109 if (caps[1] & SDHCI_DRIVER_TYPE_A)
2110 mmc->caps |= MMC_CAP_DRIVER_TYPE_A;
2111 if (caps[1] & SDHCI_DRIVER_TYPE_C)
2112 mmc->caps |= MMC_CAP_DRIVER_TYPE_C;
2113 if (caps[1] & SDHCI_DRIVER_TYPE_D)
2114 mmc->caps |= MMC_CAP_DRIVER_TYPE_D;
2115
8f230f45 2116 ocr_avail = 0;
f2119df6
AN		 2117 /*
2118 * According to SD Host Controller spec v3.00, if the Host System
2119 * can afford more than 150mA, Host Driver should set XPC to 1. Also
2120 * the value is meaningful only if Voltage Support in the Capabilities
2121 * register is set. The actual current value is 4 times the register
2122 * value.
2123 */
2124 max_current_caps = sdhci_readl(host, SDHCI_MAX_CURRENT);
2125
2126 if (caps[0] & SDHCI_CAN_VDD_330) {
2127 int max_current_330;
2128
8f230f45 2129 ocr_avail |= MMC_VDD_32_33 | MMC_VDD_33_34;
f2119df6
AN		 2130
2131 max_current_330 = ((max_current_caps &
2132 SDHCI_MAX_CURRENT_330_MASK) >>
2133 SDHCI_MAX_CURRENT_330_SHIFT) *
2134 SDHCI_MAX_CURRENT_MULTIPLIER;
2135
2136 if (max_current_330 > 150)
2137 mmc->caps |= MMC_CAP_SET_XPC_330;
2138 }
2139 if (caps[0] & SDHCI_CAN_VDD_300) {
2140 int max_current_300;
2141
8f230f45 2142 ocr_avail |= MMC_VDD_29_30 | MMC_VDD_30_31;
f2119df6
AN		 2143
2144 max_current_300 = ((max_current_caps &
2145 SDHCI_MAX_CURRENT_300_MASK) >>
2146 SDHCI_MAX_CURRENT_300_SHIFT) *
2147 SDHCI_MAX_CURRENT_MULTIPLIER;
2148
2149 if (max_current_300 > 150)
2150 mmc->caps |= MMC_CAP_SET_XPC_300;
2151 }
2152 if (caps[0] & SDHCI_CAN_VDD_180) {
2153 int max_current_180;
2154
8f230f45
TI		 2155 ocr_avail |= MMC_VDD_165_195;
2156
f2119df6
AN		 2157 max_current_180 = ((max_current_caps &
2158 SDHCI_MAX_CURRENT_180_MASK) >>
2159 SDHCI_MAX_CURRENT_180_SHIFT) *
2160 SDHCI_MAX_CURRENT_MULTIPLIER;
2161
2162 if (max_current_180 > 150)
2163 mmc->caps |= MMC_CAP_SET_XPC_180;
2164 }
2165
8f230f45
TI		 2166 mmc->ocr_avail = ocr_avail;
2167 mmc->ocr_avail_sdio = ocr_avail;
2168 if (host->ocr_avail_sdio)
2169 mmc->ocr_avail_sdio &= host->ocr_avail_sdio;
2170 mmc->ocr_avail_sd = ocr_avail;
2171 if (host->ocr_avail_sd)
2172 mmc->ocr_avail_sd &= host->ocr_avail_sd;
2173 else /* normal SD controllers don't support 1.8V */
2174 mmc->ocr_avail_sd &= ~MMC_VDD_165_195;
2175 mmc->ocr_avail_mmc = ocr_avail;
2176 if (host->ocr_avail_mmc)
2177 mmc->ocr_avail_mmc &= host->ocr_avail_mmc;
146ad66e
PO		 2178
2179 if (mmc->ocr_avail == 0) {
2180 printk(KERN_ERR "%s: Hardware doesn't report any "
b69c9058 2181 "support voltages.\n", mmc_hostname(mmc));
b8c86fc5 2182 return -ENODEV;
146ad66e
PO		 2183 }
2184
d129bceb
PO		 2185 spin_lock_init(&host->lock);
2186
2187 /*
2134a922
PO		 2188 * Maximum number of segments. Depends on if the hardware
2189 * can do scatter/gather or not.
d129bceb 2190 */
2134a922 2191 if (host->flags & SDHCI_USE_ADMA)
a36274e0 2192 mmc->max_segs = 128;
a13abc7b 2193 else if (host->flags & SDHCI_USE_SDMA)
a36274e0 2194 mmc->max_segs = 1;
2134a922 2195 else /* PIO */
a36274e0 2196 mmc->max_segs = 128;
d129bceb
PO		 2197
2198 /*
bab76961 2199 * Maximum number of sectors in one transfer. Limited by DMA boundary
55db890a 2200 * size (512KiB).
d129bceb 2201 */
55db890a 2202 mmc->max_req_size = 524288;
d129bceb
PO		 2203
2204 /*
2205 * Maximum segment size. Could be one segment with the maximum number
2134a922
PO		 2206 * of bytes. When doing hardware scatter/gather, each entry cannot
2207 * be larger than 64 KiB though.
d129bceb 2208 */
30652aa3
OJ		 2209 if (host->flags & SDHCI_USE_ADMA) {
2210 if (host->quirks & SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC)
2211 mmc->max_seg_size = 65535;
2212 else
2213 mmc->max_seg_size = 65536;
2214 } else {
2134a922 2215 mmc->max_seg_size = mmc->max_req_size;
30652aa3 2216 }
d129bceb 2217
fe4a3c7a
PO		 2218 /*
2219 * Maximum block size. This varies from controller to controller and
2220 * is specified in the capabilities register.
2221 */
0633f654
AV		 2222 if (host->quirks & SDHCI_QUIRK_FORCE_BLK_SZ_2048) {
2223 mmc->max_blk_size = 2;
2224 } else {
f2119df6 2225 mmc->max_blk_size = (caps[0] & SDHCI_MAX_BLOCK_MASK) >>
0633f654
AV		 2226 SDHCI_MAX_BLOCK_SHIFT;
2227 if (mmc->max_blk_size >= 3) {
2228 printk(KERN_WARNING "%s: Invalid maximum block size, "
2229 "assuming 512 bytes\n", mmc_hostname(mmc));
2230 mmc->max_blk_size = 0;
2231 }
2232 }
2233
2234 mmc->max_blk_size = 512 << mmc->max_blk_size;
fe4a3c7a 2235
55db890a
PO		 2236 /*
2237 * Maximum block count.
2238 */
1388eefd 2239 mmc->max_blk_count = (host->quirks & SDHCI_QUIRK_NO_MULTIBLOCK) ? 1 : 65535;
55db890a 2240
d129bceb
PO		 2241 /*
2242 * Init tasklets.
2243 */
2244 tasklet_init(&host->card_tasklet,
2245 sdhci_tasklet_card, (unsigned long)host);
2246 tasklet_init(&host->finish_tasklet,
2247 sdhci_tasklet_finish, (unsigned long)host);
2248
e4cad1b5 2249 setup_timer(&host->timer, sdhci_timeout_timer, (unsigned long)host);
d129bceb 2250
dace1453 2251 ret = request_irq(host->irq, sdhci_irq, IRQF_SHARED,
b69c9058 2252 mmc_hostname(mmc), host);
d129bceb 2253 if (ret)
8ef1a143 2254 goto untasklet;
d129bceb 2255
9bea3c85
MS		 2256 host->vmmc = regulator_get(mmc_dev(mmc), "vmmc");
2257 if (IS_ERR(host->vmmc)) {
2258 printk(KERN_INFO "%s: no vmmc regulator found\n", mmc_hostname(mmc));
2259 host->vmmc = NULL;
2260 } else {
2261 regulator_enable(host->vmmc);
2262 }
2263
2f4cbb3d 2264 sdhci_init(host, 0);
d129bceb
PO		 2265
2266#ifdef CONFIG_MMC_DEBUG
2267 sdhci_dumpregs(host);
2268#endif
2269
f9134319 2270#ifdef SDHCI_USE_LEDS_CLASS
5dbace0c
HS		 2271 snprintf(host->led_name, sizeof(host->led_name),
2272 "%s::", mmc_hostname(mmc));
2273 host->led.name = host->led_name;
2f730fec
PO		 2274 host->led.brightness = LED_OFF;
2275 host->led.default_trigger = mmc_hostname(mmc);
2276 host->led.brightness_set = sdhci_led_control;
2277
b8c86fc5 2278 ret = led_classdev_register(mmc_dev(mmc), &host->led);
2f730fec
PO		 2279 if (ret)
2280 goto reset;
2281#endif
2282
5f25a66f
PO		 2283 mmiowb();
2284
d129bceb
PO		 2285 mmc_add_host(mmc);
2286
a13abc7b 2287 printk(KERN_INFO "%s: SDHCI controller on %s [%s] using %s\n",
d1b26863 2288 mmc_hostname(mmc), host->hw_name, dev_name(mmc_dev(mmc)),
a13abc7b
RR		 2289 (host->flags & SDHCI_USE_ADMA) ? "ADMA" :
2290 (host->flags & SDHCI_USE_SDMA) ? "DMA" : "PIO");
d129bceb 2291
7260cf5e
AV		 2292 sdhci_enable_card_detection(host);
2293
d129bceb
PO		 2294 return 0;
2295
f9134319 2296#ifdef SDHCI_USE_LEDS_CLASS
2f730fec
PO		 2297reset:
2298 sdhci_reset(host, SDHCI_RESET_ALL);
2299 free_irq(host->irq, host);
2300#endif
8ef1a143 2301untasklet:
d129bceb
PO		 2302 tasklet_kill(&host->card_tasklet);
2303 tasklet_kill(&host->finish_tasklet);
d129bceb
PO		 2304
2305 return ret;
2306}
2307
b8c86fc5 2308EXPORT_SYMBOL_GPL(sdhci_add_host);
d129bceb 2309
1e72859e 2310void sdhci_remove_host(struct sdhci_host *host, int dead)
b8c86fc5 2311{
1e72859e
PO		 2312 unsigned long flags;
2313
2314 if (dead) {
2315 spin_lock_irqsave(&host->lock, flags);
2316
2317 host->flags |= SDHCI_DEVICE_DEAD;
2318
2319 if (host->mrq) {
2320 printk(KERN_ERR "%s: Controller removed during "
2321 " transfer!\n", mmc_hostname(host->mmc));
2322
2323 host->mrq->cmd->error = -ENOMEDIUM;
2324 tasklet_schedule(&host->finish_tasklet);
2325 }
2326
2327 spin_unlock_irqrestore(&host->lock, flags);
2328 }
2329
7260cf5e
AV		 2330 sdhci_disable_card_detection(host);
2331
b8c86fc5 2332 mmc_remove_host(host->mmc);
d129bceb 2333
f9134319 2334#ifdef SDHCI_USE_LEDS_CLASS
2f730fec
PO		 2335 led_classdev_unregister(&host->led);
2336#endif
2337
1e72859e
PO		 2338 if (!dead)
2339 sdhci_reset(host, SDHCI_RESET_ALL);
d129bceb
PO		 2340
2341 free_irq(host->irq, host);
2342
2343 del_timer_sync(&host->timer);
2344
2345 tasklet_kill(&host->card_tasklet);
2346 tasklet_kill(&host->finish_tasklet);
2134a922 2347
9bea3c85
MS		 2348 if (host->vmmc) {
2349 regulator_disable(host->vmmc);
2350 regulator_put(host->vmmc);
2351 }
2352
2134a922
PO		 2353 kfree(host->adma_desc);
2354 kfree(host->align_buffer);
2355
2356 host->adma_desc = NULL;
2357 host->align_buffer = NULL;
d129bceb
PO		 2358}
2359
b8c86fc5 2360EXPORT_SYMBOL_GPL(sdhci_remove_host);
d129bceb 2361
b8c86fc5 2362void sdhci_free_host(struct sdhci_host *host)
d129bceb 2363{
b8c86fc5 2364 mmc_free_host(host->mmc);
d129bceb
PO		 2365}
2366
b8c86fc5 2367EXPORT_SYMBOL_GPL(sdhci_free_host);
d129bceb
PO		 2368
2369/*****************************************************************************\
2370 * *
2371 * Driver init/exit *
2372 * *
2373\*****************************************************************************/
2374
2375static int __init sdhci_drv_init(void)
2376{
2377 printk(KERN_INFO DRIVER_NAME
52fbf9c9 2378 ": Secure Digital Host Controller Interface driver\n");
d129bceb
PO		 2379 printk(KERN_INFO DRIVER_NAME ": Copyright(c) Pierre Ossman\n");
2380
b8c86fc5 2381 return 0;
d129bceb
PO		 2382}
2383
2384static void __exit sdhci_drv_exit(void)
2385{
d129bceb
PO		 2386}
2387
2388module_init(sdhci_drv_init);
2389module_exit(sdhci_drv_exit);
2390
df673b22 2391module_param(debug_quirks, uint, 0444);
67435274 2392
32710e8f 2393MODULE_AUTHOR("Pierre Ossman <pierre@ossman.eu>");
b8c86fc5 2394MODULE_DESCRIPTION("Secure Digital Host Controller Interface core driver");
d129bceb 2395MODULE_LICENSE("GPL");
67435274 2396
df673b22 2397MODULE_PARM_DESC(debug_quirks, "Force certain quirks.");
Linux kernel - Deliverables
This page took 0.749692 seconds and 5 git commands to generate.