Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* 3c509.c: A 3c509 EtherLink3 ethernet driver for linux. */ |
2 | /* | |
3 | Written 1993-2000 by Donald Becker. | |
4 | ||
5 | Copyright 1994-2000 by Donald Becker. | |
6 | Copyright 1993 United States Government as represented by the | |
7 | Director, National Security Agency. This software may be used and | |
8 | distributed according to the terms of the GNU General Public License, | |
9 | incorporated herein by reference. | |
10 | ||
11 | This driver is for the 3Com EtherLinkIII series. | |
12 | ||
13 | The author may be reached as becker@scyld.com, or C/O | |
14 | Scyld Computing Corporation | |
15 | 410 Severn Ave., Suite 210 | |
16 | Annapolis MD 21403 | |
17 | ||
18 | Known limitations: | |
19 | Because of the way 3c509 ISA detection works it's difficult to predict | |
20 | a priori which of several ISA-mode cards will be detected first. | |
21 | ||
22 | This driver does not use predictive interrupt mode, resulting in higher | |
23 | packet latency but lower overhead. If interrupts are disabled for an | |
24 | unusually long time it could also result in missed packets, but in | |
25 | practice this rarely happens. | |
26 | ||
27 | ||
28 | FIXES: | |
29 | Alan Cox: Removed the 'Unexpected interrupt' bug. | |
30 | Michael Meskes: Upgraded to Donald Becker's version 1.07. | |
6aa20a22 | 31 | Alan Cox: Increased the eeprom delay. Regardless of |
1da177e4 LT |
32 | what the docs say some people definitely |
33 | get problems with lower (but in card spec) | |
34 | delays | |
35 | v1.10 4/21/97 Fixed module code so that multiple cards may be detected, | |
36 | other cleanups. -djb | |
37 | Andrea Arcangeli: Upgraded to Donald Becker's version 1.12. | |
38 | Rick Payne: Fixed SMP race condition | |
39 | v1.13 9/8/97 Made 'max_interrupt_work' an insmod-settable variable -djb | |
40 | v1.14 10/15/97 Avoided waiting..discard message for fast machines -djb | |
41 | v1.15 1/31/98 Faster recovery for Tx errors. -djb | |
42 | v1.16 2/3/98 Different ID port handling to avoid sound cards. -djb | |
43 | v1.18 12Mar2001 Andrew Morton <andrewm@uow.edu.au> | |
44 | - Avoid bogus detect of 3c590's (Andrzej Krzysztofowicz) | |
45 | - Reviewed against 1.18 from scyld.com | |
46 | v1.18a 17Nov2001 Jeff Garzik <jgarzik@pobox.com> | |
47 | - ethtool support | |
48 | v1.18b 1Mar2002 Zwane Mwaikambo <zwane@commfireservices.com> | |
49 | - Power Management support | |
50 | v1.18c 1Mar2002 David Ruggiero <jdr@farfalle.com> | |
51 | - Full duplex support | |
52 | v1.19 16Oct2002 Zwane Mwaikambo <zwane@linuxpower.ca> | |
53 | - Additional ethtool features | |
54 | v1.19a 28Oct2002 Davud Ruggiero <jdr@farfalle.com> | |
55 | - Increase *read_eeprom udelay to workaround oops with 2 cards. | |
56 | v1.19b 08Nov2002 Marc Zyngier <maz@wild-wind.fr.eu.org> | |
57 | - Introduce driver model for EISA cards. | |
58 | */ | |
59 | ||
60 | #define DRV_NAME "3c509" | |
61 | #define DRV_VERSION "1.19b" | |
62 | #define DRV_RELDATE "08Nov2002" | |
63 | ||
64 | /* A few values that may be tweaked. */ | |
65 | ||
66 | /* Time in jiffies before concluding the transmitter is hung. */ | |
67 | #define TX_TIMEOUT (400*HZ/1000) | |
68 | /* Maximum events (Rx packets, etc.) to handle at each interrupt. */ | |
69 | static int max_interrupt_work = 10; | |
70 | ||
1da177e4 LT |
71 | #include <linux/module.h> |
72 | #ifdef CONFIG_MCA | |
73 | #include <linux/mca.h> | |
74 | #endif | |
75 | #include <linux/isapnp.h> | |
76 | #include <linux/string.h> | |
77 | #include <linux/interrupt.h> | |
78 | #include <linux/errno.h> | |
79 | #include <linux/in.h> | |
80 | #include <linux/slab.h> | |
81 | #include <linux/ioport.h> | |
82 | #include <linux/init.h> | |
83 | #include <linux/netdevice.h> | |
84 | #include <linux/etherdevice.h> | |
85 | #include <linux/pm.h> | |
86 | #include <linux/skbuff.h> | |
87 | #include <linux/delay.h> /* for udelay() */ | |
88 | #include <linux/spinlock.h> | |
89 | #include <linux/ethtool.h> | |
90 | #include <linux/device.h> | |
91 | #include <linux/eisa.h> | |
92 | #include <linux/bitops.h> | |
93 | ||
94 | #include <asm/uaccess.h> | |
95 | #include <asm/io.h> | |
96 | #include <asm/irq.h> | |
97 | ||
2c2a8c53 | 98 | static char version[] __initdata = DRV_NAME ".c:" DRV_VERSION " " DRV_RELDATE " becker@scyld.com\n"; |
1da177e4 | 99 | |
60a89ff6 PE |
100 | #if defined(CONFIG_PM) && (defined(CONFIG_MCA) || defined(CONFIG_EISA)) |
101 | #define EL3_SUSPEND | |
102 | #endif | |
103 | ||
1da177e4 LT |
104 | #ifdef EL3_DEBUG |
105 | static int el3_debug = EL3_DEBUG; | |
106 | #else | |
107 | static int el3_debug = 2; | |
108 | #endif | |
109 | ||
110 | /* Used to do a global count of all the cards in the system. Must be | |
111 | * a global variable so that the mca/eisa probe routines can increment | |
112 | * it */ | |
113 | static int el3_cards = 0; | |
114 | ||
115 | /* To minimize the size of the driver source I only define operating | |
116 | constants if they are used several times. You'll need the manual | |
117 | anyway if you want to understand driver details. */ | |
118 | /* Offsets from base I/O address. */ | |
119 | #define EL3_DATA 0x00 | |
120 | #define EL3_CMD 0x0e | |
121 | #define EL3_STATUS 0x0e | |
122 | #define EEPROM_READ 0x80 | |
123 | ||
124 | #define EL3_IO_EXTENT 16 | |
125 | ||
126 | #define EL3WINDOW(win_num) outw(SelectWindow + (win_num), ioaddr + EL3_CMD) | |
127 | ||
128 | ||
129 | /* The top five bits written to EL3_CMD are a command, the lower | |
130 | 11 bits are the parameter, if applicable. */ | |
131 | enum c509cmd { | |
132 | TotalReset = 0<<11, SelectWindow = 1<<11, StartCoax = 2<<11, | |
133 | RxDisable = 3<<11, RxEnable = 4<<11, RxReset = 5<<11, RxDiscard = 8<<11, | |
134 | TxEnable = 9<<11, TxDisable = 10<<11, TxReset = 11<<11, | |
135 | FakeIntr = 12<<11, AckIntr = 13<<11, SetIntrEnb = 14<<11, | |
136 | SetStatusEnb = 15<<11, SetRxFilter = 16<<11, SetRxThreshold = 17<<11, | |
137 | SetTxThreshold = 18<<11, SetTxStart = 19<<11, StatsEnable = 21<<11, | |
138 | StatsDisable = 22<<11, StopCoax = 23<<11, PowerUp = 27<<11, | |
139 | PowerDown = 28<<11, PowerAuto = 29<<11}; | |
140 | ||
141 | enum c509status { | |
142 | IntLatch = 0x0001, AdapterFailure = 0x0002, TxComplete = 0x0004, | |
143 | TxAvailable = 0x0008, RxComplete = 0x0010, RxEarly = 0x0020, | |
144 | IntReq = 0x0040, StatsFull = 0x0080, CmdBusy = 0x1000, }; | |
145 | ||
146 | /* The SetRxFilter command accepts the following classes: */ | |
147 | enum RxFilter { | |
148 | RxStation = 1, RxMulticast = 2, RxBroadcast = 4, RxProm = 8 }; | |
149 | ||
150 | /* Register window 1 offsets, the window used in normal operation. */ | |
151 | #define TX_FIFO 0x00 | |
152 | #define RX_FIFO 0x00 | |
153 | #define RX_STATUS 0x08 | |
154 | #define TX_STATUS 0x0B | |
155 | #define TX_FREE 0x0C /* Remaining free bytes in Tx buffer. */ | |
156 | ||
157 | #define WN0_CONF_CTRL 0x04 /* Window 0: Configuration control register */ | |
158 | #define WN0_ADDR_CONF 0x06 /* Window 0: Address configuration register */ | |
159 | #define WN0_IRQ 0x08 /* Window 0: Set IRQ line in bits 12-15. */ | |
160 | #define WN4_MEDIA 0x0A /* Window 4: Various transcvr/media bits. */ | |
161 | #define MEDIA_TP 0x00C0 /* Enable link beat and jabber for 10baseT. */ | |
162 | #define WN4_NETDIAG 0x06 /* Window 4: Net diagnostic */ | |
6aa20a22 | 163 | #define FD_ENABLE 0x8000 /* Enable full-duplex ("external loopback") */ |
1da177e4 LT |
164 | |
165 | /* | |
166 | * Must be a power of two (we use a binary and in the | |
167 | * circular queue) | |
168 | */ | |
169 | #define SKB_QUEUE_SIZE 64 | |
170 | ||
171 | struct el3_private { | |
172 | struct net_device_stats stats; | |
173 | struct net_device *next_dev; | |
174 | spinlock_t lock; | |
175 | /* skb send-queue */ | |
176 | int head, size; | |
177 | struct sk_buff *queue[SKB_QUEUE_SIZE]; | |
1da177e4 LT |
178 | enum { |
179 | EL3_MCA, | |
180 | EL3_PNP, | |
181 | EL3_EISA, | |
182 | } type; /* type of device */ | |
183 | struct device *dev; | |
184 | }; | |
185 | static int id_port __initdata = 0x110; /* Start with 0x110 to avoid new sound cards.*/ | |
186 | static struct net_device *el3_root_dev; | |
187 | ||
188 | static ushort id_read_eeprom(int index); | |
189 | static ushort read_eeprom(int ioaddr, int index); | |
190 | static int el3_open(struct net_device *dev); | |
191 | static int el3_start_xmit(struct sk_buff *skb, struct net_device *dev); | |
7d12e780 | 192 | static irqreturn_t el3_interrupt(int irq, void *dev_id); |
1da177e4 LT |
193 | static void update_stats(struct net_device *dev); |
194 | static struct net_device_stats *el3_get_stats(struct net_device *dev); | |
195 | static int el3_rx(struct net_device *dev); | |
196 | static int el3_close(struct net_device *dev); | |
197 | static void set_multicast_list(struct net_device *dev); | |
198 | static void el3_tx_timeout (struct net_device *dev); | |
199 | static void el3_down(struct net_device *dev); | |
200 | static void el3_up(struct net_device *dev); | |
7282d491 | 201 | static const struct ethtool_ops ethtool_ops; |
60a89ff6 PE |
202 | #ifdef EL3_SUSPEND |
203 | static int el3_suspend(struct device *, pm_message_t); | |
204 | static int el3_resume(struct device *); | |
205 | #else | |
206 | #define el3_suspend NULL | |
207 | #define el3_resume NULL | |
1da177e4 | 208 | #endif |
60a89ff6 PE |
209 | |
210 | ||
1da177e4 LT |
211 | /* generic device remove for all device types */ |
212 | #if defined(CONFIG_EISA) || defined(CONFIG_MCA) | |
213 | static int el3_device_remove (struct device *device); | |
214 | #endif | |
215 | #ifdef CONFIG_NET_POLL_CONTROLLER | |
216 | static void el3_poll_controller(struct net_device *dev); | |
217 | #endif | |
218 | ||
219 | #ifdef CONFIG_EISA | |
220 | static struct eisa_device_id el3_eisa_ids[] = { | |
221 | { "TCM5092" }, | |
222 | { "TCM5093" }, | |
f04e3f09 | 223 | { "TCM5095" }, |
1da177e4 LT |
224 | { "" } |
225 | }; | |
07563c71 | 226 | MODULE_DEVICE_TABLE(eisa, el3_eisa_ids); |
1da177e4 LT |
227 | |
228 | static int el3_eisa_probe (struct device *device); | |
229 | ||
230 | static struct eisa_driver el3_eisa_driver = { | |
231 | .id_table = el3_eisa_ids, | |
232 | .driver = { | |
233 | .name = "3c509", | |
234 | .probe = el3_eisa_probe, | |
60a89ff6 PE |
235 | .remove = __devexit_p (el3_device_remove), |
236 | .suspend = el3_suspend, | |
237 | .resume = el3_resume, | |
1da177e4 LT |
238 | } |
239 | }; | |
240 | #endif | |
241 | ||
242 | #ifdef CONFIG_MCA | |
243 | static int el3_mca_probe(struct device *dev); | |
244 | ||
245 | static short el3_mca_adapter_ids[] __initdata = { | |
246 | 0x627c, | |
247 | 0x627d, | |
248 | 0x62db, | |
249 | 0x62f6, | |
250 | 0x62f7, | |
251 | 0x0000 | |
252 | }; | |
253 | ||
254 | static char *el3_mca_adapter_names[] __initdata = { | |
255 | "3Com 3c529 EtherLink III (10base2)", | |
256 | "3Com 3c529 EtherLink III (10baseT)", | |
257 | "3Com 3c529 EtherLink III (test mode)", | |
258 | "3Com 3c529 EtherLink III (TP or coax)", | |
259 | "3Com 3c529 EtherLink III (TP)", | |
260 | NULL | |
261 | }; | |
262 | ||
263 | static struct mca_driver el3_mca_driver = { | |
264 | .id_table = el3_mca_adapter_ids, | |
265 | .driver = { | |
266 | .name = "3c529", | |
267 | .bus = &mca_bus_type, | |
268 | .probe = el3_mca_probe, | |
269 | .remove = __devexit_p(el3_device_remove), | |
60a89ff6 PE |
270 | .suspend = el3_suspend, |
271 | .resume = el3_resume, | |
1da177e4 LT |
272 | }, |
273 | }; | |
274 | #endif /* CONFIG_MCA */ | |
275 | ||
276 | #if defined(__ISAPNP__) | |
277 | static struct isapnp_device_id el3_isapnp_adapters[] __initdata = { | |
278 | { ISAPNP_ANY_ID, ISAPNP_ANY_ID, | |
279 | ISAPNP_VENDOR('T', 'C', 'M'), ISAPNP_FUNCTION(0x5090), | |
280 | (long) "3Com Etherlink III (TP)" }, | |
281 | { ISAPNP_ANY_ID, ISAPNP_ANY_ID, | |
282 | ISAPNP_VENDOR('T', 'C', 'M'), ISAPNP_FUNCTION(0x5091), | |
283 | (long) "3Com Etherlink III" }, | |
284 | { ISAPNP_ANY_ID, ISAPNP_ANY_ID, | |
285 | ISAPNP_VENDOR('T', 'C', 'M'), ISAPNP_FUNCTION(0x5094), | |
286 | (long) "3Com Etherlink III (combo)" }, | |
287 | { ISAPNP_ANY_ID, ISAPNP_ANY_ID, | |
288 | ISAPNP_VENDOR('T', 'C', 'M'), ISAPNP_FUNCTION(0x5095), | |
289 | (long) "3Com Etherlink III (TPO)" }, | |
290 | { ISAPNP_ANY_ID, ISAPNP_ANY_ID, | |
291 | ISAPNP_VENDOR('T', 'C', 'M'), ISAPNP_FUNCTION(0x5098), | |
292 | (long) "3Com Etherlink III (TPC)" }, | |
293 | { ISAPNP_ANY_ID, ISAPNP_ANY_ID, | |
294 | ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_FUNCTION(0x80f7), | |
295 | (long) "3Com Etherlink III compatible" }, | |
296 | { ISAPNP_ANY_ID, ISAPNP_ANY_ID, | |
297 | ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_FUNCTION(0x80f8), | |
298 | (long) "3Com Etherlink III compatible" }, | |
299 | { } /* terminate list */ | |
300 | }; | |
301 | ||
bd7eb1c5 | 302 | static __be16 el3_isapnp_phys_addr[8][3]; |
1da177e4 LT |
303 | static int nopnp; |
304 | #endif /* __ISAPNP__ */ | |
305 | ||
306 | /* With the driver model introduction for EISA devices, both init | |
307 | * and cleanup have been split : | |
308 | * - EISA devices probe/remove starts in el3_eisa_probe/el3_device_remove | |
309 | * - MCA/ISA still use el3_probe | |
310 | * | |
311 | * Both call el3_common_init/el3_common_remove. */ | |
312 | ||
313 | static int __init el3_common_init(struct net_device *dev) | |
314 | { | |
315 | struct el3_private *lp = netdev_priv(dev); | |
1da177e4 | 316 | int err; |
0795af57 JP |
317 | DECLARE_MAC_BUF(mac); |
318 | const char *if_names[] = {"10baseT", "AUI", "undefined", "BNC"}; | |
1da177e4 LT |
319 | |
320 | spin_lock_init(&lp->lock); | |
321 | ||
322 | if (dev->mem_start & 0x05) { /* xcvr codes 1/3/4/12 */ | |
323 | dev->if_port = (dev->mem_start & 0x0f); | |
324 | } else { /* xcvr codes 0/8 */ | |
325 | /* use eeprom value, but save user's full-duplex selection */ | |
326 | dev->if_port |= (dev->mem_start & 0x08); | |
327 | } | |
328 | ||
329 | /* The EL3-specific entries in the device structure. */ | |
330 | dev->open = &el3_open; | |
331 | dev->hard_start_xmit = &el3_start_xmit; | |
332 | dev->stop = &el3_close; | |
333 | dev->get_stats = &el3_get_stats; | |
334 | dev->set_multicast_list = &set_multicast_list; | |
335 | dev->tx_timeout = el3_tx_timeout; | |
336 | dev->watchdog_timeo = TX_TIMEOUT; | |
337 | #ifdef CONFIG_NET_POLL_CONTROLLER | |
338 | dev->poll_controller = el3_poll_controller; | |
339 | #endif | |
340 | SET_ETHTOOL_OPS(dev, ðtool_ops); | |
341 | ||
342 | err = register_netdev(dev); | |
343 | if (err) { | |
344 | printk(KERN_ERR "Failed to register 3c5x9 at %#3.3lx, IRQ %d.\n", | |
345 | dev->base_addr, dev->irq); | |
346 | release_region(dev->base_addr, EL3_IO_EXTENT); | |
347 | return err; | |
348 | } | |
349 | ||
0795af57 JP |
350 | printk(KERN_INFO "%s: 3c5x9 found at %#3.3lx, %s port, " |
351 | "address %s, IRQ %d.\n", | |
352 | dev->name, dev->base_addr, if_names[(dev->if_port & 0x03)], | |
353 | print_mac(mac, dev->dev_addr), dev->irq); | |
1da177e4 LT |
354 | |
355 | if (el3_debug > 0) | |
2c2a8c53 | 356 | printk(KERN_INFO "%s", version); |
1da177e4 LT |
357 | return 0; |
358 | ||
359 | } | |
360 | ||
361 | static void el3_common_remove (struct net_device *dev) | |
362 | { | |
363 | struct el3_private *lp = netdev_priv(dev); | |
364 | ||
365 | (void) lp; /* Keep gcc quiet... */ | |
1da177e4 LT |
366 | #if defined(__ISAPNP__) |
367 | if (lp->type == EL3_PNP) | |
368 | pnp_device_detach(to_pnp_dev(lp->dev)); | |
369 | #endif | |
370 | ||
371 | unregister_netdev (dev); | |
372 | release_region(dev->base_addr, EL3_IO_EXTENT); | |
373 | free_netdev (dev); | |
374 | } | |
375 | ||
376 | static int __init el3_probe(int card_idx) | |
377 | { | |
378 | struct net_device *dev; | |
379 | struct el3_private *lp; | |
380 | short lrs_state = 0xff, i; | |
381 | int ioaddr, irq, if_port; | |
bd7eb1c5 | 382 | __be16 phys_addr[3]; |
1da177e4 LT |
383 | static int current_tag; |
384 | int err = -ENODEV; | |
385 | #if defined(__ISAPNP__) | |
386 | static int pnp_cards; | |
387 | struct pnp_dev *idev = NULL; | |
9ca20ebc | 388 | int pnp_found = 0; |
1da177e4 LT |
389 | |
390 | if (nopnp == 1) | |
391 | goto no_pnp; | |
392 | ||
393 | for (i=0; el3_isapnp_adapters[i].vendor != 0; i++) { | |
394 | int j; | |
395 | while ((idev = pnp_find_dev(NULL, | |
396 | el3_isapnp_adapters[i].vendor, | |
397 | el3_isapnp_adapters[i].function, | |
398 | idev))) { | |
399 | if (pnp_device_attach(idev) < 0) | |
400 | continue; | |
401 | if (pnp_activate_dev(idev) < 0) { | |
402 | __again: | |
403 | pnp_device_detach(idev); | |
404 | continue; | |
405 | } | |
406 | if (!pnp_port_valid(idev, 0) || !pnp_irq_valid(idev, 0)) | |
407 | goto __again; | |
408 | ioaddr = pnp_port_start(idev, 0); | |
409 | if (!request_region(ioaddr, EL3_IO_EXTENT, "3c509 PnP")) { | |
410 | pnp_device_detach(idev); | |
411 | return -EBUSY; | |
412 | } | |
413 | irq = pnp_irq(idev, 0); | |
414 | if (el3_debug > 3) | |
415 | printk ("ISAPnP reports %s at i/o 0x%x, irq %d\n", | |
416 | (char*) el3_isapnp_adapters[i].driver_data, ioaddr, irq); | |
417 | EL3WINDOW(0); | |
418 | for (j = 0; j < 3; j++) | |
419 | el3_isapnp_phys_addr[pnp_cards][j] = | |
420 | phys_addr[j] = | |
421 | htons(read_eeprom(ioaddr, j)); | |
422 | if_port = read_eeprom(ioaddr, 8) >> 14; | |
423 | dev = alloc_etherdev(sizeof (struct el3_private)); | |
424 | if (!dev) { | |
425 | release_region(ioaddr, EL3_IO_EXTENT); | |
426 | pnp_device_detach(idev); | |
427 | return -ENOMEM; | |
428 | } | |
429 | ||
1da177e4 LT |
430 | SET_NETDEV_DEV(dev, &idev->dev); |
431 | pnp_cards++; | |
432 | ||
433 | netdev_boot_setup_check(dev); | |
9ca20ebc | 434 | pnp_found = 1; |
1da177e4 LT |
435 | goto found; |
436 | } | |
437 | } | |
438 | no_pnp: | |
439 | #endif /* __ISAPNP__ */ | |
440 | ||
441 | /* Select an open I/O location at 0x1*0 to do contention select. */ | |
442 | for ( ; id_port < 0x200; id_port += 0x10) { | |
443 | if (!request_region(id_port, 1, "3c509")) | |
444 | continue; | |
445 | outb(0x00, id_port); | |
446 | outb(0xff, id_port); | |
447 | if (inb(id_port) & 0x01){ | |
448 | release_region(id_port, 1); | |
449 | break; | |
450 | } else | |
451 | release_region(id_port, 1); | |
452 | } | |
453 | if (id_port >= 0x200) { | |
454 | /* Rare -- do we really need a warning? */ | |
455 | printk(" WARNING: No I/O port available for 3c509 activation.\n"); | |
456 | return -ENODEV; | |
457 | } | |
458 | ||
459 | /* Next check for all ISA bus boards by sending the ID sequence to the | |
460 | ID_PORT. We find cards past the first by setting the 'current_tag' | |
461 | on cards as they are found. Cards with their tag set will not | |
462 | respond to subsequent ID sequences. */ | |
463 | ||
464 | outb(0x00, id_port); | |
465 | outb(0x00, id_port); | |
466 | for(i = 0; i < 255; i++) { | |
467 | outb(lrs_state, id_port); | |
468 | lrs_state <<= 1; | |
469 | lrs_state = lrs_state & 0x100 ? lrs_state ^ 0xcf : lrs_state; | |
470 | } | |
471 | ||
472 | /* For the first probe, clear all board's tag registers. */ | |
473 | if (current_tag == 0) | |
474 | outb(0xd0, id_port); | |
475 | else /* Otherwise kill off already-found boards. */ | |
476 | outb(0xd8, id_port); | |
477 | ||
478 | if (id_read_eeprom(7) != 0x6d50) { | |
479 | return -ENODEV; | |
480 | } | |
481 | ||
482 | /* Read in EEPROM data, which does contention-select. | |
483 | Only the lowest address board will stay "on-line". | |
484 | 3Com got the byte order backwards. */ | |
485 | for (i = 0; i < 3; i++) { | |
486 | phys_addr[i] = htons(id_read_eeprom(i)); | |
487 | } | |
488 | ||
489 | #if defined(__ISAPNP__) | |
490 | if (nopnp == 0) { | |
491 | /* The ISA PnP 3c509 cards respond to the ID sequence. | |
492 | This check is needed in order not to register them twice. */ | |
493 | for (i = 0; i < pnp_cards; i++) { | |
494 | if (phys_addr[0] == el3_isapnp_phys_addr[i][0] && | |
495 | phys_addr[1] == el3_isapnp_phys_addr[i][1] && | |
496 | phys_addr[2] == el3_isapnp_phys_addr[i][2]) | |
497 | { | |
498 | if (el3_debug > 3) | |
499 | printk("3c509 with address %02x %02x %02x %02x %02x %02x was found by ISAPnP\n", | |
500 | phys_addr[0] & 0xff, phys_addr[0] >> 8, | |
501 | phys_addr[1] & 0xff, phys_addr[1] >> 8, | |
502 | phys_addr[2] & 0xff, phys_addr[2] >> 8); | |
503 | /* Set the adaptor tag so that the next card can be found. */ | |
504 | outb(0xd0 + ++current_tag, id_port); | |
505 | goto no_pnp; | |
506 | } | |
507 | } | |
508 | } | |
509 | #endif /* __ISAPNP__ */ | |
510 | ||
511 | { | |
512 | unsigned int iobase = id_read_eeprom(8); | |
513 | if_port = iobase >> 14; | |
514 | ioaddr = 0x200 + ((iobase & 0x1f) << 4); | |
515 | } | |
516 | irq = id_read_eeprom(9) >> 12; | |
517 | ||
518 | dev = alloc_etherdev(sizeof (struct el3_private)); | |
519 | if (!dev) | |
520 | return -ENOMEM; | |
521 | ||
1da177e4 | 522 | netdev_boot_setup_check(dev); |
6aa20a22 | 523 | |
1da177e4 LT |
524 | /* Set passed-in IRQ or I/O Addr. */ |
525 | if (dev->irq > 1 && dev->irq < 16) | |
526 | irq = dev->irq; | |
527 | ||
528 | if (dev->base_addr) { | |
529 | if (dev->mem_end == 0x3c509 /* Magic key */ | |
530 | && dev->base_addr >= 0x200 && dev->base_addr <= 0x3e0) | |
531 | ioaddr = dev->base_addr & 0x3f0; | |
532 | else if (dev->base_addr != ioaddr) | |
533 | goto out; | |
534 | } | |
535 | ||
536 | if (!request_region(ioaddr, EL3_IO_EXTENT, "3c509")) { | |
537 | err = -EBUSY; | |
538 | goto out; | |
539 | } | |
540 | ||
541 | /* Set the adaptor tag so that the next card can be found. */ | |
542 | outb(0xd0 + ++current_tag, id_port); | |
543 | ||
544 | /* Activate the adaptor at the EEPROM location. */ | |
545 | outb((ioaddr >> 4) | 0xe0, id_port); | |
546 | ||
547 | EL3WINDOW(0); | |
548 | if (inw(ioaddr) != 0x6d50) | |
549 | goto out1; | |
550 | ||
551 | /* Free the interrupt so that some other card can use it. */ | |
552 | outw(0x0f00, ioaddr + WN0_IRQ); | |
553 | ||
554 | #if defined(__ISAPNP__) | |
555 | found: /* PNP jumps here... */ | |
556 | #endif /* __ISAPNP__ */ | |
557 | ||
558 | memcpy(dev->dev_addr, phys_addr, sizeof(phys_addr)); | |
559 | dev->base_addr = ioaddr; | |
560 | dev->irq = irq; | |
561 | dev->if_port = if_port; | |
562 | lp = netdev_priv(dev); | |
563 | #if defined(__ISAPNP__) | |
564 | lp->dev = &idev->dev; | |
9ca20ebc KH |
565 | if (pnp_found) |
566 | lp->type = EL3_PNP; | |
1da177e4 LT |
567 | #endif |
568 | err = el3_common_init(dev); | |
569 | ||
570 | if (err) | |
571 | goto out1; | |
572 | ||
1da177e4 LT |
573 | el3_cards++; |
574 | lp->next_dev = el3_root_dev; | |
575 | el3_root_dev = dev; | |
576 | return 0; | |
577 | ||
578 | out1: | |
579 | #if defined(__ISAPNP__) | |
580 | if (idev) | |
581 | pnp_device_detach(idev); | |
582 | #endif | |
583 | out: | |
584 | free_netdev(dev); | |
585 | return err; | |
586 | } | |
587 | ||
588 | #ifdef CONFIG_MCA | |
589 | static int __init el3_mca_probe(struct device *device) | |
590 | { | |
591 | /* Based on Erik Nygren's (nygren@mit.edu) 3c529 patch, | |
592 | * heavily modified by Chris Beauregard | |
593 | * (cpbeaure@csclub.uwaterloo.ca) to support standard MCA | |
594 | * probing. | |
595 | * | |
596 | * redone for multi-card detection by ZP Gu (zpg@castle.net) | |
597 | * now works as a module */ | |
598 | ||
599 | struct el3_private *lp; | |
600 | short i; | |
601 | int ioaddr, irq, if_port; | |
602 | u16 phys_addr[3]; | |
603 | struct net_device *dev = NULL; | |
604 | u_char pos4, pos5; | |
605 | struct mca_device *mdev = to_mca_device(device); | |
606 | int slot = mdev->slot; | |
607 | int err; | |
608 | ||
609 | pos4 = mca_device_read_stored_pos(mdev, 4); | |
610 | pos5 = mca_device_read_stored_pos(mdev, 5); | |
611 | ||
612 | ioaddr = ((short)((pos4&0xfc)|0x02)) << 8; | |
613 | irq = pos5 & 0x0f; | |
614 | ||
615 | ||
616 | printk("3c529: found %s at slot %d\n", | |
617 | el3_mca_adapter_names[mdev->index], slot + 1); | |
618 | ||
619 | /* claim the slot */ | |
620 | strncpy(mdev->name, el3_mca_adapter_names[mdev->index], | |
621 | sizeof(mdev->name)); | |
622 | mca_device_set_claim(mdev, 1); | |
623 | ||
624 | if_port = pos4 & 0x03; | |
625 | ||
626 | irq = mca_device_transform_irq(mdev, irq); | |
6aa20a22 | 627 | ioaddr = mca_device_transform_ioport(mdev, ioaddr); |
1da177e4 LT |
628 | if (el3_debug > 2) { |
629 | printk("3c529: irq %d ioaddr 0x%x ifport %d\n", irq, ioaddr, if_port); | |
630 | } | |
631 | EL3WINDOW(0); | |
632 | for (i = 0; i < 3; i++) { | |
633 | phys_addr[i] = htons(read_eeprom(ioaddr, i)); | |
634 | } | |
635 | ||
636 | dev = alloc_etherdev(sizeof (struct el3_private)); | |
637 | if (dev == NULL) { | |
638 | release_region(ioaddr, EL3_IO_EXTENT); | |
639 | return -ENOMEM; | |
640 | } | |
641 | ||
1da177e4 LT |
642 | netdev_boot_setup_check(dev); |
643 | ||
644 | memcpy(dev->dev_addr, phys_addr, sizeof(phys_addr)); | |
645 | dev->base_addr = ioaddr; | |
646 | dev->irq = irq; | |
647 | dev->if_port = if_port; | |
648 | lp = netdev_priv(dev); | |
649 | lp->dev = device; | |
650 | lp->type = EL3_MCA; | |
651 | device->driver_data = dev; | |
652 | err = el3_common_init(dev); | |
653 | ||
654 | if (err) { | |
655 | device->driver_data = NULL; | |
656 | free_netdev(dev); | |
657 | return -ENOMEM; | |
658 | } | |
659 | ||
660 | el3_cards++; | |
661 | return 0; | |
662 | } | |
6aa20a22 | 663 | |
1da177e4 LT |
664 | #endif /* CONFIG_MCA */ |
665 | ||
666 | #ifdef CONFIG_EISA | |
667 | static int __init el3_eisa_probe (struct device *device) | |
668 | { | |
669 | struct el3_private *lp; | |
670 | short i; | |
671 | int ioaddr, irq, if_port; | |
672 | u16 phys_addr[3]; | |
673 | struct net_device *dev = NULL; | |
674 | struct eisa_device *edev; | |
675 | int err; | |
676 | ||
677 | /* Yeepee, The driver framework is calling us ! */ | |
678 | edev = to_eisa_device (device); | |
679 | ioaddr = edev->base_addr; | |
6aa20a22 | 680 | |
1da177e4 LT |
681 | if (!request_region(ioaddr, EL3_IO_EXTENT, "3c509")) |
682 | return -EBUSY; | |
683 | ||
684 | /* Change the register set to the configuration window 0. */ | |
685 | outw(SelectWindow | 0, ioaddr + 0xC80 + EL3_CMD); | |
686 | ||
687 | irq = inw(ioaddr + WN0_IRQ) >> 12; | |
688 | if_port = inw(ioaddr + 6)>>14; | |
689 | for (i = 0; i < 3; i++) | |
690 | phys_addr[i] = htons(read_eeprom(ioaddr, i)); | |
691 | ||
692 | /* Restore the "Product ID" to the EEPROM read register. */ | |
693 | read_eeprom(ioaddr, 3); | |
694 | ||
695 | dev = alloc_etherdev(sizeof (struct el3_private)); | |
696 | if (dev == NULL) { | |
697 | release_region(ioaddr, EL3_IO_EXTENT); | |
698 | return -ENOMEM; | |
699 | } | |
700 | ||
1da177e4 LT |
701 | netdev_boot_setup_check(dev); |
702 | ||
703 | memcpy(dev->dev_addr, phys_addr, sizeof(phys_addr)); | |
704 | dev->base_addr = ioaddr; | |
705 | dev->irq = irq; | |
706 | dev->if_port = if_port; | |
707 | lp = netdev_priv(dev); | |
708 | lp->dev = device; | |
709 | lp->type = EL3_EISA; | |
710 | eisa_set_drvdata (edev, dev); | |
711 | err = el3_common_init(dev); | |
712 | ||
713 | if (err) { | |
714 | eisa_set_drvdata (edev, NULL); | |
715 | free_netdev(dev); | |
716 | return err; | |
717 | } | |
718 | ||
719 | el3_cards++; | |
720 | return 0; | |
721 | } | |
722 | #endif | |
723 | ||
724 | #if defined(CONFIG_EISA) || defined(CONFIG_MCA) | |
725 | /* This remove works for all device types. | |
726 | * | |
727 | * The net dev must be stored in the driver_data field */ | |
728 | static int __devexit el3_device_remove (struct device *device) | |
729 | { | |
730 | struct net_device *dev; | |
731 | ||
732 | dev = device->driver_data; | |
733 | ||
734 | el3_common_remove (dev); | |
735 | return 0; | |
736 | } | |
737 | #endif | |
738 | ||
739 | /* Read a word from the EEPROM using the regular EEPROM access register. | |
740 | Assume that we are in register window zero. | |
741 | */ | |
742 | static ushort read_eeprom(int ioaddr, int index) | |
743 | { | |
744 | outw(EEPROM_READ + index, ioaddr + 10); | |
6aa20a22 | 745 | /* Pause for at least 162 us. for the read to take place. |
1da177e4 LT |
746 | Some chips seem to require much longer */ |
747 | mdelay(2); | |
748 | return inw(ioaddr + 12); | |
749 | } | |
750 | ||
751 | /* Read a word from the EEPROM when in the ISA ID probe state. */ | |
752 | static ushort __init id_read_eeprom(int index) | |
753 | { | |
754 | int bit, word = 0; | |
755 | ||
756 | /* Issue read command, and pause for at least 162 us. for it to complete. | |
757 | Assume extra-fast 16Mhz bus. */ | |
758 | outb(EEPROM_READ + index, id_port); | |
759 | ||
760 | /* Pause for at least 162 us. for the read to take place. */ | |
761 | /* Some chips seem to require much longer */ | |
762 | mdelay(4); | |
6aa20a22 | 763 | |
1da177e4 LT |
764 | for (bit = 15; bit >= 0; bit--) |
765 | word = (word << 1) + (inb(id_port) & 0x01); | |
766 | ||
767 | if (el3_debug > 3) | |
768 | printk(" 3c509 EEPROM word %d %#4.4x.\n", index, word); | |
769 | ||
770 | return word; | |
771 | } | |
772 | ||
773 | ||
774 | static int | |
775 | el3_open(struct net_device *dev) | |
776 | { | |
777 | int ioaddr = dev->base_addr; | |
778 | int i; | |
779 | ||
780 | outw(TxReset, ioaddr + EL3_CMD); | |
781 | outw(RxReset, ioaddr + EL3_CMD); | |
782 | outw(SetStatusEnb | 0x00, ioaddr + EL3_CMD); | |
783 | ||
784 | i = request_irq(dev->irq, &el3_interrupt, 0, dev->name, dev); | |
785 | if (i) | |
786 | return i; | |
787 | ||
788 | EL3WINDOW(0); | |
789 | if (el3_debug > 3) | |
790 | printk("%s: Opening, IRQ %d status@%x %4.4x.\n", dev->name, | |
791 | dev->irq, ioaddr + EL3_STATUS, inw(ioaddr + EL3_STATUS)); | |
792 | ||
793 | el3_up(dev); | |
794 | ||
795 | if (el3_debug > 3) | |
796 | printk("%s: Opened 3c509 IRQ %d status %4.4x.\n", | |
797 | dev->name, dev->irq, inw(ioaddr + EL3_STATUS)); | |
798 | ||
799 | return 0; | |
800 | } | |
801 | ||
802 | static void | |
803 | el3_tx_timeout (struct net_device *dev) | |
804 | { | |
805 | struct el3_private *lp = netdev_priv(dev); | |
806 | int ioaddr = dev->base_addr; | |
807 | ||
808 | /* Transmitter timeout, serious problems. */ | |
809 | printk("%s: transmit timed out, Tx_status %2.2x status %4.4x " | |
810 | "Tx FIFO room %d.\n", | |
811 | dev->name, inb(ioaddr + TX_STATUS), inw(ioaddr + EL3_STATUS), | |
812 | inw(ioaddr + TX_FREE)); | |
813 | lp->stats.tx_errors++; | |
814 | dev->trans_start = jiffies; | |
815 | /* Issue TX_RESET and TX_START commands. */ | |
816 | outw(TxReset, ioaddr + EL3_CMD); | |
817 | outw(TxEnable, ioaddr + EL3_CMD); | |
818 | netif_wake_queue(dev); | |
819 | } | |
820 | ||
821 | ||
822 | static int | |
823 | el3_start_xmit(struct sk_buff *skb, struct net_device *dev) | |
824 | { | |
825 | struct el3_private *lp = netdev_priv(dev); | |
826 | int ioaddr = dev->base_addr; | |
827 | unsigned long flags; | |
828 | ||
829 | netif_stop_queue (dev); | |
830 | ||
831 | lp->stats.tx_bytes += skb->len; | |
6aa20a22 | 832 | |
1da177e4 LT |
833 | if (el3_debug > 4) { |
834 | printk("%s: el3_start_xmit(length = %u) called, status %4.4x.\n", | |
835 | dev->name, skb->len, inw(ioaddr + EL3_STATUS)); | |
836 | } | |
837 | #if 0 | |
838 | #ifndef final_version | |
839 | { /* Error-checking code, delete someday. */ | |
840 | ushort status = inw(ioaddr + EL3_STATUS); | |
841 | if (status & 0x0001 /* IRQ line active, missed one. */ | |
842 | && inw(ioaddr + EL3_STATUS) & 1) { /* Make sure. */ | |
843 | printk("%s: Missed interrupt, status then %04x now %04x" | |
844 | " Tx %2.2x Rx %4.4x.\n", dev->name, status, | |
845 | inw(ioaddr + EL3_STATUS), inb(ioaddr + TX_STATUS), | |
846 | inw(ioaddr + RX_STATUS)); | |
847 | /* Fake interrupt trigger by masking, acknowledge interrupts. */ | |
848 | outw(SetStatusEnb | 0x00, ioaddr + EL3_CMD); | |
849 | outw(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq, | |
850 | ioaddr + EL3_CMD); | |
851 | outw(SetStatusEnb | 0xff, ioaddr + EL3_CMD); | |
852 | } | |
853 | } | |
854 | #endif | |
855 | #endif | |
856 | /* | |
857 | * We lock the driver against other processors. Note | |
858 | * we don't need to lock versus the IRQ as we suspended | |
859 | * that. This means that we lose the ability to take | |
860 | * an RX during a TX upload. That sucks a bit with SMP | |
861 | * on an original 3c509 (2K buffer) | |
862 | * | |
863 | * Using disable_irq stops us crapping on other | |
864 | * time sensitive devices. | |
865 | */ | |
866 | ||
867 | spin_lock_irqsave(&lp->lock, flags); | |
868 | ||
869 | /* Put out the doubleword header... */ | |
870 | outw(skb->len, ioaddr + TX_FIFO); | |
871 | outw(0x00, ioaddr + TX_FIFO); | |
872 | /* ... and the packet rounded to a doubleword. */ | |
1da177e4 | 873 | outsl(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2); |
1da177e4 LT |
874 | |
875 | dev->trans_start = jiffies; | |
876 | if (inw(ioaddr + TX_FREE) > 1536) | |
877 | netif_start_queue(dev); | |
878 | else | |
879 | /* Interrupt us when the FIFO has room for max-sized packet. */ | |
880 | outw(SetTxThreshold + 1536, ioaddr + EL3_CMD); | |
881 | ||
882 | spin_unlock_irqrestore(&lp->lock, flags); | |
883 | ||
884 | dev_kfree_skb (skb); | |
885 | ||
886 | /* Clear the Tx status stack. */ | |
887 | { | |
888 | short tx_status; | |
889 | int i = 4; | |
890 | ||
891 | while (--i > 0 && (tx_status = inb(ioaddr + TX_STATUS)) > 0) { | |
892 | if (tx_status & 0x38) lp->stats.tx_aborted_errors++; | |
893 | if (tx_status & 0x30) outw(TxReset, ioaddr + EL3_CMD); | |
894 | if (tx_status & 0x3C) outw(TxEnable, ioaddr + EL3_CMD); | |
895 | outb(0x00, ioaddr + TX_STATUS); /* Pop the status stack. */ | |
896 | } | |
897 | } | |
898 | return 0; | |
899 | } | |
900 | ||
901 | /* The EL3 interrupt handler. */ | |
902 | static irqreturn_t | |
7d12e780 | 903 | el3_interrupt(int irq, void *dev_id) |
1da177e4 | 904 | { |
c31f28e7 | 905 | struct net_device *dev = dev_id; |
1da177e4 LT |
906 | struct el3_private *lp; |
907 | int ioaddr, status; | |
908 | int i = max_interrupt_work; | |
909 | ||
1da177e4 LT |
910 | lp = netdev_priv(dev); |
911 | spin_lock(&lp->lock); | |
912 | ||
913 | ioaddr = dev->base_addr; | |
914 | ||
915 | if (el3_debug > 4) { | |
916 | status = inw(ioaddr + EL3_STATUS); | |
917 | printk("%s: interrupt, status %4.4x.\n", dev->name, status); | |
918 | } | |
919 | ||
920 | while ((status = inw(ioaddr + EL3_STATUS)) & | |
921 | (IntLatch | RxComplete | StatsFull)) { | |
922 | ||
923 | if (status & RxComplete) | |
924 | el3_rx(dev); | |
925 | ||
926 | if (status & TxAvailable) { | |
927 | if (el3_debug > 5) | |
928 | printk(" TX room bit was handled.\n"); | |
929 | /* There's room in the FIFO for a full-sized packet. */ | |
930 | outw(AckIntr | TxAvailable, ioaddr + EL3_CMD); | |
931 | netif_wake_queue (dev); | |
932 | } | |
933 | if (status & (AdapterFailure | RxEarly | StatsFull | TxComplete)) { | |
934 | /* Handle all uncommon interrupts. */ | |
935 | if (status & StatsFull) /* Empty statistics. */ | |
936 | update_stats(dev); | |
937 | if (status & RxEarly) { /* Rx early is unused. */ | |
938 | el3_rx(dev); | |
939 | outw(AckIntr | RxEarly, ioaddr + EL3_CMD); | |
940 | } | |
941 | if (status & TxComplete) { /* Really Tx error. */ | |
942 | struct el3_private *lp = netdev_priv(dev); | |
943 | short tx_status; | |
944 | int i = 4; | |
945 | ||
946 | while (--i>0 && (tx_status = inb(ioaddr + TX_STATUS)) > 0) { | |
947 | if (tx_status & 0x38) lp->stats.tx_aborted_errors++; | |
948 | if (tx_status & 0x30) outw(TxReset, ioaddr + EL3_CMD); | |
949 | if (tx_status & 0x3C) outw(TxEnable, ioaddr + EL3_CMD); | |
950 | outb(0x00, ioaddr + TX_STATUS); /* Pop the status stack. */ | |
951 | } | |
952 | } | |
953 | if (status & AdapterFailure) { | |
954 | /* Adapter failure requires Rx reset and reinit. */ | |
955 | outw(RxReset, ioaddr + EL3_CMD); | |
956 | /* Set the Rx filter to the current state. */ | |
957 | outw(SetRxFilter | RxStation | RxBroadcast | |
958 | | (dev->flags & IFF_ALLMULTI ? RxMulticast : 0) | |
959 | | (dev->flags & IFF_PROMISC ? RxProm : 0), | |
960 | ioaddr + EL3_CMD); | |
961 | outw(RxEnable, ioaddr + EL3_CMD); /* Re-enable the receiver. */ | |
962 | outw(AckIntr | AdapterFailure, ioaddr + EL3_CMD); | |
963 | } | |
964 | } | |
965 | ||
966 | if (--i < 0) { | |
967 | printk("%s: Infinite loop in interrupt, status %4.4x.\n", | |
968 | dev->name, status); | |
969 | /* Clear all interrupts. */ | |
970 | outw(AckIntr | 0xFF, ioaddr + EL3_CMD); | |
971 | break; | |
972 | } | |
973 | /* Acknowledge the IRQ. */ | |
974 | outw(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD); /* Ack IRQ */ | |
975 | } | |
976 | ||
977 | if (el3_debug > 4) { | |
978 | printk("%s: exiting interrupt, status %4.4x.\n", dev->name, | |
979 | inw(ioaddr + EL3_STATUS)); | |
980 | } | |
981 | spin_unlock(&lp->lock); | |
982 | return IRQ_HANDLED; | |
983 | } | |
984 | ||
985 | ||
986 | #ifdef CONFIG_NET_POLL_CONTROLLER | |
987 | /* | |
988 | * Polling receive - used by netconsole and other diagnostic tools | |
989 | * to allow network i/o with interrupts disabled. | |
990 | */ | |
991 | static void el3_poll_controller(struct net_device *dev) | |
992 | { | |
993 | disable_irq(dev->irq); | |
7d12e780 | 994 | el3_interrupt(dev->irq, dev); |
1da177e4 LT |
995 | enable_irq(dev->irq); |
996 | } | |
997 | #endif | |
998 | ||
999 | static struct net_device_stats * | |
1000 | el3_get_stats(struct net_device *dev) | |
1001 | { | |
1002 | struct el3_private *lp = netdev_priv(dev); | |
1003 | unsigned long flags; | |
1004 | ||
1005 | /* | |
1006 | * This is fast enough not to bother with disable IRQ | |
1007 | * stuff. | |
1008 | */ | |
6aa20a22 | 1009 | |
1da177e4 LT |
1010 | spin_lock_irqsave(&lp->lock, flags); |
1011 | update_stats(dev); | |
1012 | spin_unlock_irqrestore(&lp->lock, flags); | |
1013 | return &lp->stats; | |
1014 | } | |
1015 | ||
1016 | /* Update statistics. We change to register window 6, so this should be run | |
1017 | single-threaded if the device is active. This is expected to be a rare | |
1018 | operation, and it's simpler for the rest of the driver to assume that | |
1019 | window 1 is always valid rather than use a special window-state variable. | |
1020 | */ | |
1021 | static void update_stats(struct net_device *dev) | |
1022 | { | |
1023 | struct el3_private *lp = netdev_priv(dev); | |
1024 | int ioaddr = dev->base_addr; | |
1025 | ||
1026 | if (el3_debug > 5) | |
1027 | printk(" Updating the statistics.\n"); | |
1028 | /* Turn off statistics updates while reading. */ | |
1029 | outw(StatsDisable, ioaddr + EL3_CMD); | |
1030 | /* Switch to the stats window, and read everything. */ | |
1031 | EL3WINDOW(6); | |
1032 | lp->stats.tx_carrier_errors += inb(ioaddr + 0); | |
1033 | lp->stats.tx_heartbeat_errors += inb(ioaddr + 1); | |
1034 | /* Multiple collisions. */ inb(ioaddr + 2); | |
1035 | lp->stats.collisions += inb(ioaddr + 3); | |
1036 | lp->stats.tx_window_errors += inb(ioaddr + 4); | |
1037 | lp->stats.rx_fifo_errors += inb(ioaddr + 5); | |
1038 | lp->stats.tx_packets += inb(ioaddr + 6); | |
1039 | /* Rx packets */ inb(ioaddr + 7); | |
1040 | /* Tx deferrals */ inb(ioaddr + 8); | |
1041 | inw(ioaddr + 10); /* Total Rx and Tx octets. */ | |
1042 | inw(ioaddr + 12); | |
1043 | ||
1044 | /* Back to window 1, and turn statistics back on. */ | |
1045 | EL3WINDOW(1); | |
1046 | outw(StatsEnable, ioaddr + EL3_CMD); | |
1047 | return; | |
1048 | } | |
1049 | ||
1050 | static int | |
1051 | el3_rx(struct net_device *dev) | |
1052 | { | |
1053 | struct el3_private *lp = netdev_priv(dev); | |
1054 | int ioaddr = dev->base_addr; | |
1055 | short rx_status; | |
1056 | ||
1057 | if (el3_debug > 5) | |
1058 | printk(" In rx_packet(), status %4.4x, rx_status %4.4x.\n", | |
1059 | inw(ioaddr+EL3_STATUS), inw(ioaddr+RX_STATUS)); | |
1060 | while ((rx_status = inw(ioaddr + RX_STATUS)) > 0) { | |
1061 | if (rx_status & 0x4000) { /* Error, update stats. */ | |
1062 | short error = rx_status & 0x3800; | |
1063 | ||
1064 | outw(RxDiscard, ioaddr + EL3_CMD); | |
1065 | lp->stats.rx_errors++; | |
1066 | switch (error) { | |
1067 | case 0x0000: lp->stats.rx_over_errors++; break; | |
1068 | case 0x0800: lp->stats.rx_length_errors++; break; | |
1069 | case 0x1000: lp->stats.rx_frame_errors++; break; | |
1070 | case 0x1800: lp->stats.rx_length_errors++; break; | |
1071 | case 0x2000: lp->stats.rx_frame_errors++; break; | |
1072 | case 0x2800: lp->stats.rx_crc_errors++; break; | |
1073 | } | |
1074 | } else { | |
1075 | short pkt_len = rx_status & 0x7ff; | |
1076 | struct sk_buff *skb; | |
1077 | ||
1078 | skb = dev_alloc_skb(pkt_len+5); | |
1079 | lp->stats.rx_bytes += pkt_len; | |
1080 | if (el3_debug > 4) | |
1081 | printk("Receiving packet size %d status %4.4x.\n", | |
1082 | pkt_len, rx_status); | |
1083 | if (skb != NULL) { | |
1da177e4 LT |
1084 | skb_reserve(skb, 2); /* Align IP on 16 byte */ |
1085 | ||
1086 | /* 'skb->data' points to the start of sk_buff data area. */ | |
1da177e4 LT |
1087 | insl(ioaddr + RX_FIFO, skb_put(skb,pkt_len), |
1088 | (pkt_len + 3) >> 2); | |
1da177e4 LT |
1089 | |
1090 | outw(RxDiscard, ioaddr + EL3_CMD); /* Pop top Rx packet. */ | |
1091 | skb->protocol = eth_type_trans(skb,dev); | |
1092 | netif_rx(skb); | |
1093 | dev->last_rx = jiffies; | |
1094 | lp->stats.rx_packets++; | |
1095 | continue; | |
1096 | } | |
1097 | outw(RxDiscard, ioaddr + EL3_CMD); | |
1098 | lp->stats.rx_dropped++; | |
1099 | if (el3_debug) | |
1100 | printk("%s: Couldn't allocate a sk_buff of size %d.\n", | |
1101 | dev->name, pkt_len); | |
1102 | } | |
1103 | inw(ioaddr + EL3_STATUS); /* Delay. */ | |
1104 | while (inw(ioaddr + EL3_STATUS) & 0x1000) | |
1105 | printk(KERN_DEBUG " Waiting for 3c509 to discard packet, status %x.\n", | |
1106 | inw(ioaddr + EL3_STATUS) ); | |
1107 | } | |
1108 | ||
1109 | return 0; | |
1110 | } | |
1111 | ||
1112 | /* | |
1113 | * Set or clear the multicast filter for this adaptor. | |
1114 | */ | |
1115 | static void | |
1116 | set_multicast_list(struct net_device *dev) | |
1117 | { | |
1118 | unsigned long flags; | |
1119 | struct el3_private *lp = netdev_priv(dev); | |
1120 | int ioaddr = dev->base_addr; | |
1121 | ||
1122 | if (el3_debug > 1) { | |
1123 | static int old; | |
1124 | if (old != dev->mc_count) { | |
1125 | old = dev->mc_count; | |
1126 | printk("%s: Setting Rx mode to %d addresses.\n", dev->name, dev->mc_count); | |
1127 | } | |
1128 | } | |
1129 | spin_lock_irqsave(&lp->lock, flags); | |
1130 | if (dev->flags&IFF_PROMISC) { | |
1131 | outw(SetRxFilter | RxStation | RxMulticast | RxBroadcast | RxProm, | |
1132 | ioaddr + EL3_CMD); | |
1133 | } | |
1134 | else if (dev->mc_count || (dev->flags&IFF_ALLMULTI)) { | |
1135 | outw(SetRxFilter | RxStation | RxMulticast | RxBroadcast, ioaddr + EL3_CMD); | |
1136 | } | |
1137 | else | |
1138 | outw(SetRxFilter | RxStation | RxBroadcast, ioaddr + EL3_CMD); | |
1139 | spin_unlock_irqrestore(&lp->lock, flags); | |
1140 | } | |
1141 | ||
1142 | static int | |
1143 | el3_close(struct net_device *dev) | |
1144 | { | |
1145 | int ioaddr = dev->base_addr; | |
1146 | struct el3_private *lp = netdev_priv(dev); | |
6aa20a22 | 1147 | |
1da177e4 LT |
1148 | if (el3_debug > 2) |
1149 | printk("%s: Shutting down ethercard.\n", dev->name); | |
1150 | ||
1151 | el3_down(dev); | |
1152 | ||
1153 | free_irq(dev->irq, dev); | |
1154 | /* Switching back to window 0 disables the IRQ. */ | |
1155 | EL3WINDOW(0); | |
1156 | if (lp->type != EL3_EISA) { | |
1157 | /* But we explicitly zero the IRQ line select anyway. Don't do | |
1158 | * it on EISA cards, it prevents the module from getting an | |
1159 | * IRQ after unload+reload... */ | |
1160 | outw(0x0f00, ioaddr + WN0_IRQ); | |
1161 | } | |
1162 | ||
1163 | return 0; | |
1164 | } | |
1165 | ||
6aa20a22 | 1166 | static int |
1da177e4 LT |
1167 | el3_link_ok(struct net_device *dev) |
1168 | { | |
1169 | int ioaddr = dev->base_addr; | |
1170 | u16 tmp; | |
1171 | ||
1172 | EL3WINDOW(4); | |
1173 | tmp = inw(ioaddr + WN4_MEDIA); | |
1174 | EL3WINDOW(1); | |
1175 | return tmp & (1<<11); | |
1176 | } | |
1177 | ||
1178 | static int | |
1179 | el3_netdev_get_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd) | |
1180 | { | |
1181 | u16 tmp; | |
1182 | int ioaddr = dev->base_addr; | |
6aa20a22 | 1183 | |
1da177e4 | 1184 | EL3WINDOW(0); |
6aa20a22 | 1185 | /* obtain current transceiver via WN4_MEDIA? */ |
1da177e4 LT |
1186 | tmp = inw(ioaddr + WN0_ADDR_CONF); |
1187 | ecmd->transceiver = XCVR_INTERNAL; | |
1188 | switch (tmp >> 14) { | |
1189 | case 0: | |
1190 | ecmd->port = PORT_TP; | |
1191 | break; | |
1192 | case 1: | |
1193 | ecmd->port = PORT_AUI; | |
1194 | ecmd->transceiver = XCVR_EXTERNAL; | |
1195 | break; | |
1196 | case 3: | |
1197 | ecmd->port = PORT_BNC; | |
1198 | default: | |
1199 | break; | |
1200 | } | |
1201 | ||
1202 | ecmd->duplex = DUPLEX_HALF; | |
1203 | ecmd->supported = 0; | |
1204 | tmp = inw(ioaddr + WN0_CONF_CTRL); | |
1205 | if (tmp & (1<<13)) | |
1206 | ecmd->supported |= SUPPORTED_AUI; | |
1207 | if (tmp & (1<<12)) | |
1208 | ecmd->supported |= SUPPORTED_BNC; | |
1209 | if (tmp & (1<<9)) { | |
1210 | ecmd->supported |= SUPPORTED_TP | SUPPORTED_10baseT_Half | | |
1211 | SUPPORTED_10baseT_Full; /* hmm... */ | |
1212 | EL3WINDOW(4); | |
1213 | tmp = inw(ioaddr + WN4_NETDIAG); | |
1214 | if (tmp & FD_ENABLE) | |
1215 | ecmd->duplex = DUPLEX_FULL; | |
1216 | } | |
1217 | ||
1218 | ecmd->speed = SPEED_10; | |
1219 | EL3WINDOW(1); | |
1220 | return 0; | |
1221 | } | |
1222 | ||
1223 | static int | |
1224 | el3_netdev_set_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd) | |
1225 | { | |
1226 | u16 tmp; | |
1227 | int ioaddr = dev->base_addr; | |
1228 | ||
1229 | if (ecmd->speed != SPEED_10) | |
1230 | return -EINVAL; | |
1231 | if ((ecmd->duplex != DUPLEX_HALF) && (ecmd->duplex != DUPLEX_FULL)) | |
1232 | return -EINVAL; | |
1233 | if ((ecmd->transceiver != XCVR_INTERNAL) && (ecmd->transceiver != XCVR_EXTERNAL)) | |
1234 | return -EINVAL; | |
1235 | ||
1236 | /* change XCVR type */ | |
1237 | EL3WINDOW(0); | |
1238 | tmp = inw(ioaddr + WN0_ADDR_CONF); | |
1239 | switch (ecmd->port) { | |
1240 | case PORT_TP: | |
1241 | tmp &= ~(3<<14); | |
1242 | dev->if_port = 0; | |
1243 | break; | |
1244 | case PORT_AUI: | |
1245 | tmp |= (1<<14); | |
1246 | dev->if_port = 1; | |
1247 | break; | |
1248 | case PORT_BNC: | |
1249 | tmp |= (3<<14); | |
1250 | dev->if_port = 3; | |
1251 | break; | |
1252 | default: | |
1253 | return -EINVAL; | |
1254 | } | |
1255 | ||
1256 | outw(tmp, ioaddr + WN0_ADDR_CONF); | |
1257 | if (dev->if_port == 3) { | |
1258 | /* fire up the DC-DC convertor if BNC gets enabled */ | |
1259 | tmp = inw(ioaddr + WN0_ADDR_CONF); | |
1260 | if (tmp & (3 << 14)) { | |
1261 | outw(StartCoax, ioaddr + EL3_CMD); | |
1262 | udelay(800); | |
1263 | } else | |
1264 | return -EIO; | |
1265 | } | |
1266 | ||
1267 | EL3WINDOW(4); | |
1268 | tmp = inw(ioaddr + WN4_NETDIAG); | |
1269 | if (ecmd->duplex == DUPLEX_FULL) | |
1270 | tmp |= FD_ENABLE; | |
1271 | else | |
1272 | tmp &= ~FD_ENABLE; | |
1273 | outw(tmp, ioaddr + WN4_NETDIAG); | |
1274 | EL3WINDOW(1); | |
1275 | ||
1276 | return 0; | |
1277 | } | |
1278 | ||
1279 | static void el3_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) | |
1280 | { | |
1281 | strcpy(info->driver, DRV_NAME); | |
1282 | strcpy(info->version, DRV_VERSION); | |
1283 | } | |
1284 | ||
1285 | static int el3_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) | |
1286 | { | |
1287 | struct el3_private *lp = netdev_priv(dev); | |
1288 | int ret; | |
1289 | ||
1290 | spin_lock_irq(&lp->lock); | |
1291 | ret = el3_netdev_get_ecmd(dev, ecmd); | |
1292 | spin_unlock_irq(&lp->lock); | |
1293 | return ret; | |
1294 | } | |
1295 | ||
1296 | static int el3_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) | |
1297 | { | |
1298 | struct el3_private *lp = netdev_priv(dev); | |
1299 | int ret; | |
1300 | ||
1301 | spin_lock_irq(&lp->lock); | |
1302 | ret = el3_netdev_set_ecmd(dev, ecmd); | |
1303 | spin_unlock_irq(&lp->lock); | |
1304 | return ret; | |
1305 | } | |
1306 | ||
1307 | static u32 el3_get_link(struct net_device *dev) | |
1308 | { | |
1309 | struct el3_private *lp = netdev_priv(dev); | |
1310 | u32 ret; | |
1311 | ||
1312 | spin_lock_irq(&lp->lock); | |
1313 | ret = el3_link_ok(dev); | |
1314 | spin_unlock_irq(&lp->lock); | |
1315 | return ret; | |
1316 | } | |
1317 | ||
1318 | static u32 el3_get_msglevel(struct net_device *dev) | |
1319 | { | |
1320 | return el3_debug; | |
1321 | } | |
1322 | ||
1323 | static void el3_set_msglevel(struct net_device *dev, u32 v) | |
1324 | { | |
1325 | el3_debug = v; | |
1326 | } | |
1327 | ||
7282d491 | 1328 | static const struct ethtool_ops ethtool_ops = { |
1da177e4 LT |
1329 | .get_drvinfo = el3_get_drvinfo, |
1330 | .get_settings = el3_get_settings, | |
1331 | .set_settings = el3_set_settings, | |
1332 | .get_link = el3_get_link, | |
1333 | .get_msglevel = el3_get_msglevel, | |
1334 | .set_msglevel = el3_set_msglevel, | |
1335 | }; | |
1336 | ||
1337 | static void | |
1338 | el3_down(struct net_device *dev) | |
1339 | { | |
1340 | int ioaddr = dev->base_addr; | |
1341 | ||
1342 | netif_stop_queue(dev); | |
1343 | ||
1344 | /* Turn off statistics ASAP. We update lp->stats below. */ | |
1345 | outw(StatsDisable, ioaddr + EL3_CMD); | |
1346 | ||
1347 | /* Disable the receiver and transmitter. */ | |
1348 | outw(RxDisable, ioaddr + EL3_CMD); | |
1349 | outw(TxDisable, ioaddr + EL3_CMD); | |
1350 | ||
1351 | if (dev->if_port == 3) | |
1352 | /* Turn off thinnet power. Green! */ | |
1353 | outw(StopCoax, ioaddr + EL3_CMD); | |
1354 | else if (dev->if_port == 0) { | |
1355 | /* Disable link beat and jabber, if_port may change here next open(). */ | |
1356 | EL3WINDOW(4); | |
1357 | outw(inw(ioaddr + WN4_MEDIA) & ~MEDIA_TP, ioaddr + WN4_MEDIA); | |
1358 | } | |
1359 | ||
1360 | outw(SetIntrEnb | 0x0000, ioaddr + EL3_CMD); | |
1361 | ||
1362 | update_stats(dev); | |
1363 | } | |
1364 | ||
1365 | static void | |
1366 | el3_up(struct net_device *dev) | |
1367 | { | |
1368 | int i, sw_info, net_diag; | |
1369 | int ioaddr = dev->base_addr; | |
6aa20a22 | 1370 | |
1da177e4 LT |
1371 | /* Activating the board required and does no harm otherwise */ |
1372 | outw(0x0001, ioaddr + 4); | |
1373 | ||
1374 | /* Set the IRQ line. */ | |
1375 | outw((dev->irq << 12) | 0x0f00, ioaddr + WN0_IRQ); | |
1376 | ||
1377 | /* Set the station address in window 2 each time opened. */ | |
1378 | EL3WINDOW(2); | |
1379 | ||
1380 | for (i = 0; i < 6; i++) | |
1381 | outb(dev->dev_addr[i], ioaddr + i); | |
1382 | ||
1383 | if ((dev->if_port & 0x03) == 3) /* BNC interface */ | |
1384 | /* Start the thinnet transceiver. We should really wait 50ms...*/ | |
1385 | outw(StartCoax, ioaddr + EL3_CMD); | |
1386 | else if ((dev->if_port & 0x03) == 0) { /* 10baseT interface */ | |
1387 | /* Combine secondary sw_info word (the adapter level) and primary | |
1388 | sw_info word (duplex setting plus other useless bits) */ | |
1389 | EL3WINDOW(0); | |
6aa20a22 | 1390 | sw_info = (read_eeprom(ioaddr, 0x14) & 0x400f) | |
1da177e4 LT |
1391 | (read_eeprom(ioaddr, 0x0d) & 0xBff0); |
1392 | ||
1393 | EL3WINDOW(4); | |
1394 | net_diag = inw(ioaddr + WN4_NETDIAG); | |
1395 | net_diag = (net_diag | FD_ENABLE); /* temporarily assume full-duplex will be set */ | |
1396 | printk("%s: ", dev->name); | |
1397 | switch (dev->if_port & 0x0c) { | |
1398 | case 12: | |
1399 | /* force full-duplex mode if 3c5x9b */ | |
1400 | if (sw_info & 0x000f) { | |
1401 | printk("Forcing 3c5x9b full-duplex mode"); | |
1402 | break; | |
1403 | } | |
1404 | case 8: | |
1405 | /* set full-duplex mode based on eeprom config setting */ | |
1406 | if ((sw_info & 0x000f) && (sw_info & 0x8000)) { | |
1407 | printk("Setting 3c5x9b full-duplex mode (from EEPROM configuration bit)"); | |
1408 | break; | |
1409 | } | |
1410 | default: | |
1411 | /* xcvr=(0 || 4) OR user has an old 3c5x9 non "B" model */ | |
1412 | printk("Setting 3c5x9/3c5x9B half-duplex mode"); | |
1413 | net_diag = (net_diag & ~FD_ENABLE); /* disable full duplex */ | |
1414 | } | |
1415 | ||
1416 | outw(net_diag, ioaddr + WN4_NETDIAG); | |
1417 | printk(" if_port: %d, sw_info: %4.4x\n", dev->if_port, sw_info); | |
1418 | if (el3_debug > 3) | |
1419 | printk("%s: 3c5x9 net diag word is now: %4.4x.\n", dev->name, net_diag); | |
1420 | /* Enable link beat and jabber check. */ | |
1421 | outw(inw(ioaddr + WN4_MEDIA) | MEDIA_TP, ioaddr + WN4_MEDIA); | |
1422 | } | |
1423 | ||
1424 | /* Switch to the stats window, and clear all stats by reading. */ | |
1425 | outw(StatsDisable, ioaddr + EL3_CMD); | |
1426 | EL3WINDOW(6); | |
1427 | for (i = 0; i < 9; i++) | |
1428 | inb(ioaddr + i); | |
1429 | inw(ioaddr + 10); | |
1430 | inw(ioaddr + 12); | |
1431 | ||
1432 | /* Switch to register set 1 for normal use. */ | |
1433 | EL3WINDOW(1); | |
1434 | ||
1435 | /* Accept b-case and phys addr only. */ | |
1436 | outw(SetRxFilter | RxStation | RxBroadcast, ioaddr + EL3_CMD); | |
1437 | outw(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */ | |
1438 | ||
1439 | outw(RxEnable, ioaddr + EL3_CMD); /* Enable the receiver. */ | |
1440 | outw(TxEnable, ioaddr + EL3_CMD); /* Enable transmitter. */ | |
1441 | /* Allow status bits to be seen. */ | |
1442 | outw(SetStatusEnb | 0xff, ioaddr + EL3_CMD); | |
1443 | /* Ack all pending events, and set active indicator mask. */ | |
1444 | outw(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq, | |
1445 | ioaddr + EL3_CMD); | |
1446 | outw(SetIntrEnb | IntLatch|TxAvailable|TxComplete|RxComplete|StatsFull, | |
1447 | ioaddr + EL3_CMD); | |
1448 | ||
1449 | netif_start_queue(dev); | |
1450 | } | |
1451 | ||
1452 | /* Power Management support functions */ | |
60a89ff6 | 1453 | #ifdef EL3_SUSPEND |
1da177e4 LT |
1454 | |
1455 | static int | |
60a89ff6 | 1456 | el3_suspend(struct device *pdev, pm_message_t state) |
1da177e4 LT |
1457 | { |
1458 | unsigned long flags; | |
1459 | struct net_device *dev; | |
1460 | struct el3_private *lp; | |
1461 | int ioaddr; | |
6aa20a22 | 1462 | |
60a89ff6 | 1463 | dev = pdev->driver_data; |
1da177e4 LT |
1464 | lp = netdev_priv(dev); |
1465 | ioaddr = dev->base_addr; | |
1466 | ||
1467 | spin_lock_irqsave(&lp->lock, flags); | |
1468 | ||
1469 | if (netif_running(dev)) | |
1470 | netif_device_detach(dev); | |
1471 | ||
1472 | el3_down(dev); | |
1473 | outw(PowerDown, ioaddr + EL3_CMD); | |
1474 | ||
1475 | spin_unlock_irqrestore(&lp->lock, flags); | |
1476 | return 0; | |
1477 | } | |
1478 | ||
1479 | static int | |
60a89ff6 | 1480 | el3_resume(struct device *pdev) |
1da177e4 LT |
1481 | { |
1482 | unsigned long flags; | |
1483 | struct net_device *dev; | |
1484 | struct el3_private *lp; | |
1485 | int ioaddr; | |
6aa20a22 | 1486 | |
60a89ff6 | 1487 | dev = pdev->driver_data; |
1da177e4 LT |
1488 | lp = netdev_priv(dev); |
1489 | ioaddr = dev->base_addr; | |
1490 | ||
1491 | spin_lock_irqsave(&lp->lock, flags); | |
1492 | ||
1493 | outw(PowerUp, ioaddr + EL3_CMD); | |
1494 | el3_up(dev); | |
1495 | ||
1496 | if (netif_running(dev)) | |
1497 | netif_device_attach(dev); | |
6aa20a22 | 1498 | |
1da177e4 LT |
1499 | spin_unlock_irqrestore(&lp->lock, flags); |
1500 | return 0; | |
1501 | } | |
1502 | ||
60a89ff6 | 1503 | #endif /* EL3_SUSPEND */ |
1da177e4 LT |
1504 | |
1505 | /* Parameters that may be passed into the module. */ | |
1506 | static int debug = -1; | |
1507 | static int irq[] = {-1, -1, -1, -1, -1, -1, -1, -1}; | |
1508 | static int xcvr[] = {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}; | |
1509 | ||
1510 | module_param(debug,int, 0); | |
1511 | module_param_array(irq, int, NULL, 0); | |
1512 | module_param_array(xcvr, int, NULL, 0); | |
1513 | module_param(max_interrupt_work, int, 0); | |
1514 | MODULE_PARM_DESC(debug, "debug level (0-6)"); | |
1515 | MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)"); | |
1516 | MODULE_PARM_DESC(xcvr,"transceiver(s) (0=internal, 1=external)"); | |
1517 | MODULE_PARM_DESC(max_interrupt_work, "maximum events handled per interrupt"); | |
1518 | #if defined(__ISAPNP__) | |
1519 | module_param(nopnp, int, 0); | |
1520 | MODULE_PARM_DESC(nopnp, "disable ISA PnP support (0-1)"); | |
1521 | MODULE_DEVICE_TABLE(isapnp, el3_isapnp_adapters); | |
1522 | #endif /* __ISAPNP__ */ | |
1523 | MODULE_DESCRIPTION("3Com Etherlink III (3c509, 3c509B) ISA/PnP ethernet driver"); | |
1524 | MODULE_LICENSE("GPL"); | |
1525 | ||
1526 | static int __init el3_init_module(void) | |
1527 | { | |
0992a5d0 | 1528 | int ret = 0; |
1da177e4 LT |
1529 | el3_cards = 0; |
1530 | ||
1531 | if (debug >= 0) | |
1532 | el3_debug = debug; | |
1533 | ||
1534 | el3_root_dev = NULL; | |
1535 | while (el3_probe(el3_cards) == 0) { | |
1536 | if (irq[el3_cards] > 1) | |
1537 | el3_root_dev->irq = irq[el3_cards]; | |
1538 | if (xcvr[el3_cards] >= 0) | |
1539 | el3_root_dev->if_port = xcvr[el3_cards]; | |
1540 | el3_cards++; | |
1541 | } | |
1542 | ||
1543 | #ifdef CONFIG_EISA | |
0992a5d0 | 1544 | ret = eisa_driver_register(&el3_eisa_driver); |
1da177e4 LT |
1545 | #endif |
1546 | #ifdef CONFIG_MCA | |
0992a5d0 AM |
1547 | { |
1548 | int err = mca_register_driver(&el3_mca_driver); | |
1549 | if (ret == 0) | |
1550 | ret = err; | |
1551 | } | |
1da177e4 | 1552 | #endif |
0992a5d0 | 1553 | return ret; |
1da177e4 LT |
1554 | } |
1555 | ||
1556 | static void __exit el3_cleanup_module(void) | |
1557 | { | |
1558 | struct net_device *next_dev; | |
1559 | ||
1560 | while (el3_root_dev) { | |
1561 | struct el3_private *lp = netdev_priv(el3_root_dev); | |
1562 | ||
1563 | next_dev = lp->next_dev; | |
1564 | el3_common_remove (el3_root_dev); | |
1565 | el3_root_dev = next_dev; | |
1566 | } | |
1567 | ||
1568 | #ifdef CONFIG_EISA | |
1569 | eisa_driver_unregister (&el3_eisa_driver); | |
1570 | #endif | |
1571 | #ifdef CONFIG_MCA | |
1572 | mca_unregister_driver(&el3_mca_driver); | |
1573 | #endif | |
1574 | } | |
1575 | ||
1576 | module_init (el3_init_module); | |
1577 | module_exit (el3_cleanup_module); | |
1578 |