Commit | Line | Data |
---|---|---|
305282ba JC |
1 | /* atlx_hw.h -- common hardware definitions for Attansic network drivers |
2 | * | |
3 | * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved. | |
4 | * Copyright(c) 2006 - 2007 Chris Snook <csnook@redhat.com> | |
e8f720fd | 5 | * Copyright(c) 2006 - 2008 Jay Cliburn <jcliburn@gmail.com> |
305282ba JC |
6 | * Copyright(c) 2007 Atheros Corporation. All rights reserved. |
7 | * | |
8 | * Derived from Intel e1000 driver | |
9 | * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. | |
10 | * | |
11 | * This program is free software; you can redistribute it and/or modify it | |
12 | * under the terms of the GNU General Public License as published by the Free | |
13 | * Software Foundation; either version 2 of the License, or (at your option) | |
14 | * any later version. | |
15 | * | |
16 | * This program is distributed in the hope that it will be useful, but WITHOUT | |
17 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
18 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | |
19 | * more details. | |
20 | * | |
21 | * You should have received a copy of the GNU General Public License along with | |
22 | * this program; if not, write to the Free Software Foundation, Inc., 59 | |
23 | * Temple Place - Suite 330, Boston, MA 02111-1307, USA. | |
24 | */ | |
25 | ||
26 | #ifndef ATLX_H | |
27 | #define ATLX_H | |
28 | ||
29 | #include <linux/module.h> | |
30 | #include <linux/types.h> | |
31 | ||
e8f720fd | 32 | #define ATLX_DRIVER_VERSION "2.1.3" |
305282ba JC |
33 | MODULE_AUTHOR("Xiong Huang <xiong.huang@atheros.com>, \ |
34 | Chris Snook <csnook@redhat.com>, Jay Cliburn <jcliburn@gmail.com>"); | |
35 | MODULE_LICENSE("GPL"); | |
36 | MODULE_VERSION(ATLX_DRIVER_VERSION); | |
37 | ||
38 | #define ATLX_ERR_PHY 2 | |
39 | #define ATLX_ERR_PHY_SPEED 7 | |
40 | #define ATLX_ERR_PHY_RES 8 | |
41 | ||
42 | #define SPEED_0 0xffff | |
43 | #define SPEED_10 10 | |
44 | #define SPEED_100 100 | |
45 | #define SPEED_1000 1000 | |
46 | #define HALF_DUPLEX 1 | |
47 | #define FULL_DUPLEX 2 | |
48 | ||
49 | #define MEDIA_TYPE_AUTO_SENSOR 0 | |
50 | ||
51 | /* register definitions */ | |
52 | #define REG_PM_CTRLSTAT 0x44 | |
53 | ||
54 | #define REG_PCIE_CAP_LIST 0x58 | |
55 | ||
56 | #define REG_VPD_CAP 0x6C | |
57 | #define VPD_CAP_ID_MASK 0xFF | |
58 | #define VPD_CAP_ID_SHIFT 0 | |
59 | #define VPD_CAP_NEXT_PTR_MASK 0xFF | |
60 | #define VPD_CAP_NEXT_PTR_SHIFT 8 | |
61 | #define VPD_CAP_VPD_ADDR_MASK 0x7FFF | |
62 | #define VPD_CAP_VPD_ADDR_SHIFT 16 | |
63 | #define VPD_CAP_VPD_FLAG 0x80000000 | |
64 | ||
65 | #define REG_VPD_DATA 0x70 | |
66 | ||
67 | #define REG_SPI_FLASH_CTRL 0x200 | |
68 | #define SPI_FLASH_CTRL_STS_NON_RDY 0x1 | |
69 | #define SPI_FLASH_CTRL_STS_WEN 0x2 | |
70 | #define SPI_FLASH_CTRL_STS_WPEN 0x80 | |
71 | #define SPI_FLASH_CTRL_DEV_STS_MASK 0xFF | |
72 | #define SPI_FLASH_CTRL_DEV_STS_SHIFT 0 | |
73 | #define SPI_FLASH_CTRL_INS_MASK 0x7 | |
74 | #define SPI_FLASH_CTRL_INS_SHIFT 8 | |
75 | #define SPI_FLASH_CTRL_START 0x800 | |
76 | #define SPI_FLASH_CTRL_EN_VPD 0x2000 | |
77 | #define SPI_FLASH_CTRL_LDSTART 0x8000 | |
78 | #define SPI_FLASH_CTRL_CS_HI_MASK 0x3 | |
79 | #define SPI_FLASH_CTRL_CS_HI_SHIFT 16 | |
80 | #define SPI_FLASH_CTRL_CS_HOLD_MASK 0x3 | |
81 | #define SPI_FLASH_CTRL_CS_HOLD_SHIFT 18 | |
82 | #define SPI_FLASH_CTRL_CLK_LO_MASK 0x3 | |
83 | #define SPI_FLASH_CTRL_CLK_LO_SHIFT 20 | |
84 | #define SPI_FLASH_CTRL_CLK_HI_MASK 0x3 | |
85 | #define SPI_FLASH_CTRL_CLK_HI_SHIFT 22 | |
86 | #define SPI_FLASH_CTRL_CS_SETUP_MASK 0x3 | |
87 | #define SPI_FLASH_CTRL_CS_SETUP_SHIFT 24 | |
88 | #define SPI_FLASH_CTRL_EROM_PGSZ_MASK 0x3 | |
89 | #define SPI_FLASH_CTRL_EROM_PGSZ_SHIFT 26 | |
90 | #define SPI_FLASH_CTRL_WAIT_READY 0x10000000 | |
91 | ||
92 | #define REG_SPI_ADDR 0x204 | |
93 | ||
94 | #define REG_SPI_DATA 0x208 | |
95 | ||
96 | #define REG_SPI_FLASH_CONFIG 0x20C | |
97 | #define SPI_FLASH_CONFIG_LD_ADDR_MASK 0xFFFFFF | |
98 | #define SPI_FLASH_CONFIG_LD_ADDR_SHIFT 0 | |
99 | #define SPI_FLASH_CONFIG_VPD_ADDR_MASK 0x3 | |
100 | #define SPI_FLASH_CONFIG_VPD_ADDR_SHIFT 24 | |
101 | #define SPI_FLASH_CONFIG_LD_EXIST 0x4000000 | |
102 | ||
103 | #define REG_SPI_FLASH_OP_PROGRAM 0x210 | |
104 | #define REG_SPI_FLASH_OP_SC_ERASE 0x211 | |
105 | #define REG_SPI_FLASH_OP_CHIP_ERASE 0x212 | |
106 | #define REG_SPI_FLASH_OP_RDID 0x213 | |
107 | #define REG_SPI_FLASH_OP_WREN 0x214 | |
108 | #define REG_SPI_FLASH_OP_RDSR 0x215 | |
109 | #define REG_SPI_FLASH_OP_WRSR 0x216 | |
110 | #define REG_SPI_FLASH_OP_READ 0x217 | |
111 | ||
112 | #define REG_TWSI_CTRL 0x218 | |
113 | #define TWSI_CTRL_LD_OFFSET_MASK 0xFF | |
114 | #define TWSI_CTRL_LD_OFFSET_SHIFT 0 | |
115 | #define TWSI_CTRL_LD_SLV_ADDR_MASK 0x7 | |
116 | #define TWSI_CTRL_LD_SLV_ADDR_SHIFT 8 | |
117 | #define TWSI_CTRL_SW_LDSTART 0x800 | |
118 | #define TWSI_CTRL_HW_LDSTART 0x1000 | |
119 | #define TWSI_CTRL_SMB_SLV_ADDR_MASK 0x7F | |
120 | #define TWSI_CTRL_SMB_SLV_ADDR_SHIFT 15 | |
121 | #define TWSI_CTRL_LD_EXIST 0x400000 | |
122 | #define TWSI_CTRL_READ_FREQ_SEL_MASK 0x3 | |
123 | #define TWSI_CTRL_READ_FREQ_SEL_SHIFT 23 | |
124 | #define TWSI_CTRL_FREQ_SEL_100K 0 | |
125 | #define TWSI_CTRL_FREQ_SEL_200K 1 | |
126 | #define TWSI_CTRL_FREQ_SEL_300K 2 | |
127 | #define TWSI_CTRL_FREQ_SEL_400K 3 | |
128 | #define TWSI_CTRL_SMB_SLV_ADDR /* FIXME: define or remove */ | |
129 | #define TWSI_CTRL_WRITE_FREQ_SEL_MASK 0x3 | |
130 | #define TWSI_CTRL_WRITE_FREQ_SEL_SHIFT 24 | |
131 | ||
132 | #define REG_PCIE_DEV_MISC_CTRL 0x21C | |
133 | #define PCIE_DEV_MISC_CTRL_EXT_PIPE 0x2 | |
134 | #define PCIE_DEV_MISC_CTRL_RETRY_BUFDIS 0x1 | |
135 | #define PCIE_DEV_MISC_CTRL_SPIROM_EXIST 0x4 | |
136 | #define PCIE_DEV_MISC_CTRL_SERDES_ENDIAN 0x8 | |
137 | #define PCIE_DEV_MISC_CTRL_SERDES_SEL_DIN 0x10 | |
138 | ||
139 | #define REG_PCIE_PHYMISC 0x1000 | |
140 | #define PCIE_PHYMISC_FORCE_RCV_DET 0x4 | |
141 | ||
142 | #define REG_PCIE_DLL_TX_CTRL1 0x1104 | |
143 | #define PCIE_DLL_TX_CTRL1_SEL_NOR_CLK 0x400 | |
144 | #define PCIE_DLL_TX_CTRL1_DEF 0x568 | |
145 | ||
146 | #define REG_LTSSM_TEST_MODE 0x12FC | |
147 | #define LTSSM_TEST_MODE_DEF 0x6500 | |
148 | ||
149 | /* Master Control Register */ | |
150 | #define REG_MASTER_CTRL 0x1400 | |
151 | #define MASTER_CTRL_SOFT_RST 0x1 | |
152 | #define MASTER_CTRL_MTIMER_EN 0x2 | |
153 | #define MASTER_CTRL_ITIMER_EN 0x4 | |
154 | #define MASTER_CTRL_MANUAL_INT 0x8 | |
155 | #define MASTER_CTRL_REV_NUM_SHIFT 16 | |
156 | #define MASTER_CTRL_REV_NUM_MASK 0xFF | |
157 | #define MASTER_CTRL_DEV_ID_SHIFT 24 | |
158 | #define MASTER_CTRL_DEV_ID_MASK 0xFF | |
159 | ||
160 | /* Timer Initial Value Register */ | |
161 | #define REG_MANUAL_TIMER_INIT 0x1404 | |
162 | ||
163 | /* IRQ Moderator Timer Initial Value Register */ | |
164 | #define REG_IRQ_MODU_TIMER_INIT 0x1408 | |
165 | ||
166 | #define REG_PHY_ENABLE 0x140C | |
167 | ||
168 | /* IRQ Anti-Lost Timer Initial Value Register */ | |
169 | #define REG_CMBDISDMA_TIMER 0x140E | |
170 | ||
171 | /* Block IDLE Status Register */ | |
172 | #define REG_IDLE_STATUS 0x1410 | |
173 | ||
174 | /* MDIO Control Register */ | |
175 | #define REG_MDIO_CTRL 0x1414 | |
176 | #define MDIO_DATA_MASK 0xFFFF | |
177 | #define MDIO_DATA_SHIFT 0 | |
178 | #define MDIO_REG_ADDR_MASK 0x1F | |
179 | #define MDIO_REG_ADDR_SHIFT 16 | |
180 | #define MDIO_RW 0x200000 | |
181 | #define MDIO_SUP_PREAMBLE 0x400000 | |
182 | #define MDIO_START 0x800000 | |
183 | #define MDIO_CLK_SEL_SHIFT 24 | |
184 | #define MDIO_CLK_25_4 0 | |
185 | #define MDIO_CLK_25_6 2 | |
186 | #define MDIO_CLK_25_8 3 | |
187 | #define MDIO_CLK_25_10 4 | |
188 | #define MDIO_CLK_25_14 5 | |
189 | #define MDIO_CLK_25_20 6 | |
190 | #define MDIO_CLK_25_28 7 | |
191 | #define MDIO_BUSY 0x8000000 | |
192 | ||
193 | /* MII PHY Status Register */ | |
194 | #define REG_PHY_STATUS 0x1418 | |
195 | ||
196 | /* BIST Control and Status Register0 (for the Packet Memory) */ | |
197 | #define REG_BIST0_CTRL 0x141C | |
198 | #define BIST0_NOW 0x1 | |
199 | #define BIST0_SRAM_FAIL 0x2 | |
200 | #define BIST0_FUSE_FLAG 0x4 | |
201 | #define REG_BIST1_CTRL 0x1420 | |
202 | #define BIST1_NOW 0x1 | |
203 | #define BIST1_SRAM_FAIL 0x2 | |
204 | #define BIST1_FUSE_FLAG 0x4 | |
205 | ||
206 | /* SerDes Lock Detect Control and Status Register */ | |
207 | #define REG_SERDES_LOCK 0x1424 | |
208 | #define SERDES_LOCK_DETECT 1 | |
209 | #define SERDES_LOCK_DETECT_EN 2 | |
210 | ||
211 | /* MAC Control Register */ | |
212 | #define REG_MAC_CTRL 0x1480 | |
213 | #define MAC_CTRL_TX_EN 1 | |
214 | #define MAC_CTRL_RX_EN 2 | |
215 | #define MAC_CTRL_TX_FLOW 4 | |
216 | #define MAC_CTRL_RX_FLOW 8 | |
217 | #define MAC_CTRL_LOOPBACK 0x10 | |
218 | #define MAC_CTRL_DUPLX 0x20 | |
219 | #define MAC_CTRL_ADD_CRC 0x40 | |
220 | #define MAC_CTRL_PAD 0x80 | |
221 | #define MAC_CTRL_LENCHK 0x100 | |
222 | #define MAC_CTRL_HUGE_EN 0x200 | |
223 | #define MAC_CTRL_PRMLEN_SHIFT 10 | |
224 | #define MAC_CTRL_PRMLEN_MASK 0xF | |
225 | #define MAC_CTRL_RMV_VLAN 0x4000 | |
226 | #define MAC_CTRL_PROMIS_EN 0x8000 | |
227 | #define MAC_CTRL_MC_ALL_EN 0x2000000 | |
228 | #define MAC_CTRL_BC_EN 0x4000000 | |
229 | ||
230 | /* MAC IPG/IFG Control Register */ | |
231 | #define REG_MAC_IPG_IFG 0x1484 | |
232 | #define MAC_IPG_IFG_IPGT_SHIFT 0 | |
233 | #define MAC_IPG_IFG_IPGT_MASK 0x7F | |
234 | #define MAC_IPG_IFG_MIFG_SHIFT 8 | |
235 | #define MAC_IPG_IFG_MIFG_MASK 0xFF | |
236 | #define MAC_IPG_IFG_IPGR1_SHIFT 16 | |
237 | #define MAC_IPG_IFG_IPGR1_MASK 0x7F | |
238 | #define MAC_IPG_IFG_IPGR2_SHIFT 24 | |
239 | #define MAC_IPG_IFG_IPGR2_MASK 0x7F | |
240 | ||
241 | /* MAC STATION ADDRESS */ | |
242 | #define REG_MAC_STA_ADDR 0x1488 | |
243 | ||
244 | /* Hash table for multicast address */ | |
245 | #define REG_RX_HASH_TABLE 0x1490 | |
246 | ||
247 | /* MAC Half-Duplex Control Register */ | |
248 | #define REG_MAC_HALF_DUPLX_CTRL 0x1498 | |
249 | #define MAC_HALF_DUPLX_CTRL_LCOL_SHIFT 0 | |
250 | #define MAC_HALF_DUPLX_CTRL_LCOL_MASK 0x3FF | |
251 | #define MAC_HALF_DUPLX_CTRL_RETRY_SHIFT 12 | |
252 | #define MAC_HALF_DUPLX_CTRL_RETRY_MASK 0xF | |
253 | #define MAC_HALF_DUPLX_CTRL_EXC_DEF_EN 0x10000 | |
254 | #define MAC_HALF_DUPLX_CTRL_NO_BACK_C 0x20000 | |
255 | #define MAC_HALF_DUPLX_CTRL_NO_BACK_P 0x40000 | |
256 | #define MAC_HALF_DUPLX_CTRL_ABEBE 0x80000 | |
257 | #define MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT 20 | |
258 | #define MAC_HALF_DUPLX_CTRL_ABEBT_MASK 0xF | |
259 | #define MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT 24 | |
260 | #define MAC_HALF_DUPLX_CTRL_JAMIPG_MASK 0xF | |
261 | ||
262 | /* Maximum Frame Length Control Register */ | |
263 | #define REG_MTU 0x149C | |
264 | ||
265 | /* Wake-On-Lan control register */ | |
266 | #define REG_WOL_CTRL 0x14A0 | |
267 | #define WOL_PATTERN_EN 0x1 | |
268 | #define WOL_PATTERN_PME_EN 0x2 | |
269 | #define WOL_MAGIC_EN 0x4 | |
270 | #define WOL_MAGIC_PME_EN 0x8 | |
271 | #define WOL_LINK_CHG_EN 0x10 | |
272 | #define WOL_LINK_CHG_PME_EN 0x20 | |
273 | #define WOL_PATTERN_ST 0x100 | |
274 | #define WOL_MAGIC_ST 0x200 | |
275 | #define WOL_LINKCHG_ST 0x400 | |
276 | #define WOL_PT0_EN 0x10000 | |
277 | #define WOL_PT1_EN 0x20000 | |
278 | #define WOL_PT2_EN 0x40000 | |
279 | #define WOL_PT3_EN 0x80000 | |
280 | #define WOL_PT4_EN 0x100000 | |
281 | #define WOL_PT0_MATCH 0x1000000 | |
282 | #define WOL_PT1_MATCH 0x2000000 | |
283 | #define WOL_PT2_MATCH 0x4000000 | |
284 | #define WOL_PT3_MATCH 0x8000000 | |
285 | #define WOL_PT4_MATCH 0x10000000 | |
286 | ||
287 | /* Internal SRAM Partition Register, high 32 bits */ | |
288 | #define REG_SRAM_RFD_ADDR 0x1500 | |
289 | ||
290 | /* Descriptor Control register, high 32 bits */ | |
291 | #define REG_DESC_BASE_ADDR_HI 0x1540 | |
292 | ||
293 | /* Interrupt Status Register */ | |
294 | #define REG_ISR 0x1600 | |
295 | #define ISR_UR_DETECTED 0x1000000 | |
296 | #define ISR_FERR_DETECTED 0x2000000 | |
297 | #define ISR_NFERR_DETECTED 0x4000000 | |
298 | #define ISR_CERR_DETECTED 0x8000000 | |
299 | #define ISR_PHY_LINKDOWN 0x10000000 | |
300 | #define ISR_DIS_INT 0x80000000 | |
301 | ||
302 | /* Interrupt Mask Register */ | |
303 | #define REG_IMR 0x1604 | |
304 | ||
305 | #define REG_RFD_RRD_IDX 0x1800 | |
306 | #define REG_TPD_IDX 0x1804 | |
307 | ||
308 | /* MII definitions */ | |
309 | ||
310 | /* PHY Common Register */ | |
311 | #define MII_ATLX_CR 0x09 | |
312 | #define MII_ATLX_SR 0x0A | |
313 | #define MII_ATLX_ESR 0x0F | |
314 | #define MII_ATLX_PSCR 0x10 | |
315 | #define MII_ATLX_PSSR 0x11 | |
316 | ||
317 | /* PHY Control Register */ | |
318 | #define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, | |
319 | * 00=10 | |
320 | */ | |
321 | #define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */ | |
322 | #define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */ | |
323 | #define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */ | |
324 | #define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */ | |
325 | #define MII_CR_POWER_DOWN 0x0800 /* Power down */ | |
326 | #define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */ | |
327 | #define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, | |
328 | * 00=10 | |
329 | */ | |
330 | #define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */ | |
331 | #define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */ | |
332 | #define MII_CR_SPEED_MASK 0x2040 | |
333 | #define MII_CR_SPEED_1000 0x0040 | |
334 | #define MII_CR_SPEED_100 0x2000 | |
335 | #define MII_CR_SPEED_10 0x0000 | |
336 | ||
337 | /* PHY Status Register */ | |
338 | #define MII_SR_EXTENDED_CAPS 0x0001 /* Ext register capabilities */ | |
339 | #define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */ | |
340 | #define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */ | |
341 | #define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */ | |
342 | #define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */ | |
343 | #define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */ | |
344 | #define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */ | |
345 | #define MII_SR_EXTENDED_STATUS 0x0100 /* Ext stat info in Reg 0x0F */ | |
346 | #define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */ | |
347 | #define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */ | |
348 | #define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */ | |
349 | #define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */ | |
350 | #define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */ | |
351 | #define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */ | |
352 | #define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */ | |
353 | ||
354 | /* Link partner ability register */ | |
355 | #define MII_LPA_SLCT 0x001f /* Same as advertise selector */ | |
356 | #define MII_LPA_10HALF 0x0020 /* Can do 10mbps half-duplex */ | |
357 | #define MII_LPA_10FULL 0x0040 /* Can do 10mbps full-duplex */ | |
358 | #define MII_LPA_100HALF 0x0080 /* Can do 100mbps half-duplex */ | |
359 | #define MII_LPA_100FULL 0x0100 /* Can do 100mbps full-duplex */ | |
360 | #define MII_LPA_100BASE4 0x0200 /* 100BASE-T4 */ | |
361 | #define MII_LPA_PAUSE 0x0400 /* PAUSE */ | |
362 | #define MII_LPA_ASYPAUSE 0x0800 /* Asymmetrical PAUSE */ | |
363 | #define MII_LPA_RFAULT 0x2000 /* Link partner faulted */ | |
364 | #define MII_LPA_LPACK 0x4000 /* Link partner acked us */ | |
365 | #define MII_LPA_NPAGE 0x8000 /* Next page bit */ | |
366 | ||
367 | /* Autoneg Advertisement Register */ | |
368 | #define MII_AR_SELECTOR_FIELD 0x0001 /* IEEE 802.3 CSMA/CD */ | |
369 | #define MII_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */ | |
370 | #define MII_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */ | |
371 | #define MII_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */ | |
372 | #define MII_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */ | |
373 | #define MII_AR_100T4_CAPS 0x0200 /* 100T4 Capable */ | |
374 | #define MII_AR_PAUSE 0x0400 /* Pause operation desired */ | |
375 | #define MII_AR_ASM_DIR 0x0800 /* Asymmetric Pause Dir bit */ | |
376 | #define MII_AR_REMOTE_FAULT 0x2000 /* Remote Fault detected */ | |
377 | #define MII_AR_NEXT_PAGE 0x8000 /* Next Page ability support */ | |
378 | #define MII_AR_SPEED_MASK 0x01E0 | |
379 | #define MII_AR_DEFAULT_CAP_MASK 0x0DE0 | |
380 | ||
381 | /* 1000BASE-T Control Register */ | |
382 | #define MII_ATLX_CR_1000T_HD_CAPS 0x0100 /* Adv 1000T HD cap */ | |
383 | #define MII_ATLX_CR_1000T_FD_CAPS 0x0200 /* Adv 1000T FD cap */ | |
384 | #define MII_ATLX_CR_1000T_REPEATER_DTE 0x0400 /* 1=Repeater/switch device, | |
385 | * 0=DTE device */ | |
386 | #define MII_ATLX_CR_1000T_MS_VALUE 0x0800 /* 1=Config PHY as Master, | |
387 | * 0=Configure PHY as Slave */ | |
388 | #define MII_ATLX_CR_1000T_MS_ENABLE 0x1000 /* 1=Man Master/Slave config, | |
389 | * 0=Auto Master/Slave config | |
390 | */ | |
391 | #define MII_ATLX_CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */ | |
392 | #define MII_ATLX_CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */ | |
393 | #define MII_ATLX_CR_1000T_TEST_MODE_2 0x4000 /* Master Xmit Jitter test */ | |
394 | #define MII_ATLX_CR_1000T_TEST_MODE_3 0x6000 /* Slave Xmit Jitter test */ | |
395 | #define MII_ATLX_CR_1000T_TEST_MODE_4 0x8000 /* Xmitter Distortion test */ | |
396 | #define MII_ATLX_CR_1000T_SPEED_MASK 0x0300 | |
397 | #define MII_ATLX_CR_1000T_DEFAULT_CAP_MASK 0x0300 | |
398 | ||
399 | /* 1000BASE-T Status Register */ | |
400 | #define MII_ATLX_SR_1000T_LP_HD_CAPS 0x0400 /* LP is 1000T HD capable */ | |
401 | #define MII_ATLX_SR_1000T_LP_FD_CAPS 0x0800 /* LP is 1000T FD capable */ | |
402 | #define MII_ATLX_SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */ | |
403 | #define MII_ATLX_SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */ | |
404 | #define MII_ATLX_SR_1000T_MS_CONFIG_RES 0x4000 /* 1=Local TX is Master | |
405 | * 0=Slave | |
406 | */ | |
407 | #define MII_ATLX_SR_1000T_MS_CONFIG_FAULT 0x8000 /* Master/Slave config | |
408 | * fault */ | |
409 | #define MII_ATLX_SR_1000T_REMOTE_RX_STATUS_SHIFT 12 | |
410 | #define MII_ATLX_SR_1000T_LOCAL_RX_STATUS_SHIFT 13 | |
411 | ||
412 | /* Extended Status Register */ | |
413 | #define MII_ATLX_ESR_1000T_HD_CAPS 0x1000 /* 1000T HD capable */ | |
414 | #define MII_ATLX_ESR_1000T_FD_CAPS 0x2000 /* 1000T FD capable */ | |
415 | #define MII_ATLX_ESR_1000X_HD_CAPS 0x4000 /* 1000X HD capable */ | |
416 | #define MII_ATLX_ESR_1000X_FD_CAPS 0x8000 /* 1000X FD capable */ | |
417 | ||
418 | /* ATLX PHY Specific Control Register */ | |
419 | #define MII_ATLX_PSCR_JABBER_DISABLE 0x0001 /* 1=Jabber Func disabled */ | |
420 | #define MII_ATLX_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enbld */ | |
421 | #define MII_ATLX_PSCR_SQE_TEST 0x0004 /* 1=SQE Test enabled */ | |
422 | #define MII_ATLX_PSCR_MAC_POWERDOWN 0x0008 | |
423 | #define MII_ATLX_PSCR_CLK125_DISABLE 0x0010 /* 1=CLK125 low | |
424 | * 0=CLK125 toggling | |
425 | */ | |
426 | #define MII_ATLX_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5, | |
427 | * Manual MDI configuration | |
428 | */ | |
429 | #define MII_ATLX_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */ | |
430 | #define MII_ATLX_PSCR_AUTO_X_1000T 0x0040 /* 1000BASE-T: Auto crossover | |
431 | * 100BASE-TX/10BASE-T: MDI | |
432 | * Mode */ | |
433 | #define MII_ATLX_PSCR_AUTO_X_MODE 0x0060 /* Auto crossover enabled | |
434 | * all speeds. | |
435 | */ | |
436 | #define MII_ATLX_PSCR_10BT_EXT_DIST_ENABLE 0x0080 /* 1=Enable Extended | |
437 | * 10BASE-T distance | |
438 | * (Lower 10BASE-T RX | |
439 | * Threshold) | |
440 | * 0=Normal 10BASE-T RX | |
441 | * Threshold | |
442 | */ | |
443 | #define MII_ATLX_PSCR_MII_5BIT_ENABLE 0x0100 /* 1=5-Bit interface in | |
444 | * 100BASE-TX | |
445 | * 0=MII interface in | |
446 | * 100BASE-TX | |
447 | */ | |
448 | #define MII_ATLX_PSCR_SCRAMBLER_DISABLE 0x0200 /* 1=Scrambler dsbl */ | |
449 | #define MII_ATLX_PSCR_FORCE_LINK_GOOD 0x0400 /* 1=Force link good */ | |
450 | #define MII_ATLX_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */ | |
451 | #define MII_ATLX_PSCR_POLARITY_REVERSAL_SHIFT 1 | |
452 | #define MII_ATLX_PSCR_AUTO_X_MODE_SHIFT 5 | |
453 | #define MII_ATLX_PSCR_10BT_EXT_DIST_ENABLE_SHIFT 7 | |
454 | ||
455 | /* ATLX PHY Specific Status Register */ | |
456 | #define MII_ATLX_PSSR_SPD_DPLX_RESOLVED 0x0800 /* 1=Speed & Duplex resolved */ | |
457 | #define MII_ATLX_PSSR_DPLX 0x2000 /* 1=Duplex 0=Half Duplex */ | |
458 | #define MII_ATLX_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */ | |
459 | #define MII_ATLX_PSSR_10MBS 0x0000 /* 00=10Mbs */ | |
460 | #define MII_ATLX_PSSR_100MBS 0x4000 /* 01=100Mbs */ | |
461 | #define MII_ATLX_PSSR_1000MBS 0x8000 /* 10=1000Mbs */ | |
462 | ||
ff772b27 JC |
463 | #define MII_DBG_ADDR 0x1D |
464 | #define MII_DBG_DATA 0x1E | |
465 | ||
305282ba JC |
466 | /* PCI Command Register Bit Definitions */ |
467 | #define PCI_REG_COMMAND 0x04 /* PCI Command Register */ | |
468 | #define CMD_IO_SPACE 0x0001 | |
469 | #define CMD_MEMORY_SPACE 0x0002 | |
470 | #define CMD_BUS_MASTER 0x0004 | |
471 | ||
472 | /* Wake Up Filter Control */ | |
473 | #define ATLX_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */ | |
474 | #define ATLX_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */ | |
475 | #define ATLX_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */ | |
476 | #define ATLX_WUFC_MC 0x00000008 /* Multicast Wakeup Enable */ | |
477 | #define ATLX_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */ | |
478 | ||
479 | #define ADVERTISE_10_HALF 0x0001 | |
480 | #define ADVERTISE_10_FULL 0x0002 | |
481 | #define ADVERTISE_100_HALF 0x0004 | |
482 | #define ADVERTISE_100_FULL 0x0008 | |
483 | #define ADVERTISE_1000_HALF 0x0010 | |
484 | #define ADVERTISE_1000_FULL 0x0020 | |
485 | #define AUTONEG_ADVERTISE_10_100_ALL 0x000F /* All 10/100 speeds */ | |
486 | #define AUTONEG_ADVERTISE_10_ALL 0x0003 /* 10Mbps Full & Half speeds */ | |
487 | ||
488 | #define PHY_AUTO_NEG_TIME 45 /* 4.5 Seconds */ | |
489 | #define PHY_FORCE_TIME 20 /* 2.0 Seconds */ | |
490 | ||
491 | /* For checksumming, the sum of all words in the EEPROM should equal 0xBABA */ | |
492 | #define EEPROM_SUM 0xBABA | |
493 | #define NODE_ADDRESS_SIZE 6 | |
494 | ||
495 | struct atlx_spi_flash_dev { | |
496 | const char *manu_name; /* manufacturer id */ | |
497 | /* op-code */ | |
498 | u8 cmd_wrsr; | |
499 | u8 cmd_read; | |
500 | u8 cmd_program; | |
501 | u8 cmd_wren; | |
502 | u8 cmd_wrdi; | |
503 | u8 cmd_rdsr; | |
504 | u8 cmd_rdid; | |
505 | u8 cmd_sector_erase; | |
506 | u8 cmd_chip_erase; | |
507 | }; | |
508 | ||
509 | #endif /* ATLX_H */ |