[deliverable/linux.git] / drivers / net / ethernet / intel / i40e / i40e_virtchnl.h

/*******************************************************************************
 *
 * Intel Ethernet Controller XL710 Family Linux Driver
 * Copyright(c) 2013 - 2014 Intel Corporation.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms and conditions of the GNU General Public License,
 * version 2, as published by the Free Software Foundation.
 *
 * This program is distributed in the hope it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 * more details.
 *
 * You should have received a copy of the GNU General Public License along
 * with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 * The full GNU General Public License is included in this distribution in
 * the file called "COPYING".
 *
 * Contact Information:
 * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 *
 ******************************************************************************/

#ifndef _I40E_VIRTCHNL_H_
#define _I40E_VIRTCHNL_H_

#include "i40e_type.h"

/* Description:
 * This header file describes the VF-PF communication protocol used
 * by the various i40e drivers.
 *
 * Admin queue buffer usage:
 * desc->opcode is always i40e_aqc_opc_send_msg_to_pf
 * flags, retval, datalen, and data addr are all used normally.
 * Firmware copies the cookie fields when sending messages between the PF and
 * VF, but uses all other fields internally. Due to this limitation, we
 * must send all messages as "indirect", i.e. using an external buffer.
 *
 * All the vsi indexes are relative to the VF. Each VF can have maximum of
 * three VSIs. All the queue indexes are relative to the VSI.  Each VF can
 * have a maximum of sixteen queues for all of its VSIs.
 *
 * The PF is required to return a status code in v_retval for all messages
 * except RESET_VF, which does not require any response. The return value is of
 * i40e_status_code type, defined in the i40e_type.h.
 *
 * In general, VF driver initialization should roughly follow the order of these
 * opcodes. The VF driver must first validate the API version of the PF driver,
 * then request a reset, then get resources, then configure queues and
 * interrupts. After these operations are complete, the VF driver may start
 * its queues, optionally add MAC and VLAN filters, and process traffic.
 */

/* Opcodes for VF-PF communication. These are placed in the v_opcode field
 * of the virtchnl_msg structure.
 */
enum i40e_virtchnl_ops {
/* The PF sends status change events to VFs using
 * the I40E_VIRTCHNL_OP_EVENT opcode.
 * VFs send requests to the PF using the other ops.
 */
	I40E_VIRTCHNL_OP_UNKNOWN = 0,
	I40E_VIRTCHNL_OP_VERSION = 1, /* must ALWAYS be 1 */
	I40E_VIRTCHNL_OP_RESET_VF = 2,
	I40E_VIRTCHNL_OP_GET_VF_RESOURCES = 3,
	I40E_VIRTCHNL_OP_CONFIG_TX_QUEUE = 4,
	I40E_VIRTCHNL_OP_CONFIG_RX_QUEUE = 5,
	I40E_VIRTCHNL_OP_CONFIG_VSI_QUEUES = 6,
	I40E_VIRTCHNL_OP_CONFIG_IRQ_MAP = 7,
	I40E_VIRTCHNL_OP_ENABLE_QUEUES = 8,
	I40E_VIRTCHNL_OP_DISABLE_QUEUES = 9,
	I40E_VIRTCHNL_OP_ADD_ETHER_ADDRESS = 10,
	I40E_VIRTCHNL_OP_DEL_ETHER_ADDRESS = 11,
	I40E_VIRTCHNL_OP_ADD_VLAN = 12,
	I40E_VIRTCHNL_OP_DEL_VLAN = 13,
	I40E_VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE = 14,
	I40E_VIRTCHNL_OP_GET_STATS = 15,
	I40E_VIRTCHNL_OP_FCOE = 16,
	I40E_VIRTCHNL_OP_EVENT = 17,
	I40E_VIRTCHNL_OP_IWARP = 20,
	I40E_VIRTCHNL_OP_CONFIG_IWARP_IRQ_MAP = 21,
	I40E_VIRTCHNL_OP_RELEASE_IWARP_IRQ_MAP = 22,
};

/* Virtual channel message descriptor. This overlays the admin queue
 * descriptor. All other data is passed in external buffers.
 */

struct i40e_virtchnl_msg {
	u8 pad[8];			 /* AQ flags/opcode/len/retval fields */
	enum i40e_virtchnl_ops v_opcode; /* avoid confusion with desc->opcode */
	i40e_status v_retval;  /* ditto for desc->retval */
	u32 vfid;			 /* used by PF when sending to VF */
};

/* Message descriptions and data structures.*/

/* I40E_VIRTCHNL_OP_VERSION
 * VF posts its version number to the PF. PF responds with its version number
 * in the same format, along with a return code.
 * Reply from PF has its major/minor versions also in param0 and param1.
 * If there is a major version mismatch, then the VF cannot operate.
 * If there is a minor version mismatch, then the VF can operate but should
 * add a warning to the system log.
 *
 * This enum element MUST always be specified as == 1, regardless of other
 * changes in the API. The PF must always respond to this message without
 * error regardless of version mismatch.
 */
#define I40E_VIRTCHNL_VERSION_MAJOR		1
#define I40E_VIRTCHNL_VERSION_MINOR		1
#define I40E_VIRTCHNL_VERSION_MINOR_NO_VF_CAPS	0

struct i40e_virtchnl_version_info {
	u32 major;
	u32 minor;
};

/* I40E_VIRTCHNL_OP_RESET_VF
 * VF sends this request to PF with no parameters
 * PF does NOT respond! VF driver must delay then poll VFGEN_RSTAT register
 * until reset completion is indicated. The admin queue must be reinitialized
 * after this operation.
 *
 * When reset is complete, PF must ensure that all queues in all VSIs associated
 * with the VF are stopped, all queue configurations in the HMC are set to 0,
 * and all MAC and VLAN filters (except the default MAC address) on all VSIs
 * are cleared.
 */

/* I40E_VIRTCHNL_OP_GET_VF_RESOURCES
 * Version 1.0 VF sends this request to PF with no parameters
 * Version 1.1 VF sends this request to PF with u32 bitmap of its capabilities
 * PF responds with an indirect message containing
 * i40e_virtchnl_vf_resource and one or more
 * i40e_virtchnl_vsi_resource structures.
 */

struct i40e_virtchnl_vsi_resource {
	u16 vsi_id;
	u16 num_queue_pairs;
	enum i40e_vsi_type vsi_type;
	u16 qset_handle;
	u8 default_mac_addr[ETH_ALEN];
};
/* VF offload flags */
#define I40E_VIRTCHNL_VF_OFFLOAD_L2		0x00000001
#define I40E_VIRTCHNL_VF_OFFLOAD_IWARP		0x00000002
#define I40E_VIRTCHNL_VF_OFFLOAD_FCOE		0x00000004
#define I40E_VIRTCHNL_VF_OFFLOAD_RSS_AQ		0x00000008
#define I40E_VIRTCHNL_VF_OFFLOAD_RSS_REG	0x00000010
#define I40E_VIRTCHNL_VF_OFFLOAD_WB_ON_ITR	0x00000020
#define I40E_VIRTCHNL_VF_OFFLOAD_VLAN		0x00010000
#define I40E_VIRTCHNL_VF_OFFLOAD_RX_POLLING	0x00020000
#define I40E_VIRTCHNL_VF_OFFLOAD_RSS_PCTYPE_V2	0x00040000

struct i40e_virtchnl_vf_resource {
	u16 num_vsis;
	u16 num_queue_pairs;
	u16 max_vectors;
	u16 max_mtu;

	u32 vf_offload_flags;
	u32 max_fcoe_contexts;
	u32 max_fcoe_filters;

	struct i40e_virtchnl_vsi_resource vsi_res[1];
};

/* I40E_VIRTCHNL_OP_CONFIG_TX_QUEUE
 * VF sends this message to set up parameters for one TX queue.
 * External data buffer contains one instance of i40e_virtchnl_txq_info.
 * PF configures requested queue and returns a status code.
 */

/* Tx queue config info */
struct i40e_virtchnl_txq_info {
	u16 vsi_id;
	u16 queue_id;
	u16 ring_len;		/* number of descriptors, multiple of 8 */
	u16 headwb_enabled;
	u64 dma_ring_addr;
	u64 dma_headwb_addr;
};

/* I40E_VIRTCHNL_OP_CONFIG_RX_QUEUE
 * VF sends this message to set up parameters for one RX queue.
 * External data buffer contains one instance of i40e_virtchnl_rxq_info.
 * PF configures requested queue and returns a status code.
 */

/* Rx queue config info */
struct i40e_virtchnl_rxq_info {
	u16 vsi_id;
	u16 queue_id;
	u32 ring_len;		/* number of descriptors, multiple of 32 */
	u16 hdr_size;
	u16 splithdr_enabled;
	u32 databuffer_size;
	u32 max_pkt_size;
	u64 dma_ring_addr;
	enum i40e_hmc_obj_rx_hsplit_0 rx_split_pos;
};

/* I40E_VIRTCHNL_OP_CONFIG_VSI_QUEUES
 * VF sends this message to set parameters for all active TX and RX queues
 * associated with the specified VSI.
 * PF configures queues and returns status.
 * If the number of queues specified is greater than the number of queues
 * associated with the VSI, an error is returned and no queues are configured.
 */
struct i40e_virtchnl_queue_pair_info {
	/* NOTE: vsi_id and queue_id should be identical for both queues. */
	struct i40e_virtchnl_txq_info txq;
	struct i40e_virtchnl_rxq_info rxq;
};

struct i40e_virtchnl_vsi_queue_config_info {
	u16 vsi_id;
	u16 num_queue_pairs;
	struct i40e_virtchnl_queue_pair_info qpair[1];
};

/* I40E_VIRTCHNL_OP_CONFIG_IRQ_MAP
 * VF uses this message to map vectors to queues.
 * The rxq_map and txq_map fields are bitmaps used to indicate which queues
 * are to be associated with the specified vector.
 * The "other" causes are always mapped to vector 0.
 * PF configures interrupt mapping and returns status.
 */
struct i40e_virtchnl_vector_map {
	u16 vsi_id;
	u16 vector_id;
	u16 rxq_map;
	u16 txq_map;
	u16 rxitr_idx;
	u16 txitr_idx;
};

struct i40e_virtchnl_irq_map_info {
	u16 num_vectors;
	struct i40e_virtchnl_vector_map vecmap[1];
};

/* I40E_VIRTCHNL_OP_ENABLE_QUEUES
 * I40E_VIRTCHNL_OP_DISABLE_QUEUES
 * VF sends these message to enable or disable TX/RX queue pairs.
 * The queues fields are bitmaps indicating which queues to act upon.
 * (Currently, we only support 16 queues per VF, but we make the field
 * u32 to allow for expansion.)
 * PF performs requested action and returns status.
 */
struct i40e_virtchnl_queue_select {
	u16 vsi_id;
	u16 pad;
	u32 rx_queues;
	u32 tx_queues;
};

/* I40E_VIRTCHNL_OP_ADD_ETHER_ADDRESS
 * VF sends this message in order to add one or more unicast or multicast
 * address filters for the specified VSI.
 * PF adds the filters and returns status.
 */

/* I40E_VIRTCHNL_OP_DEL_ETHER_ADDRESS
 * VF sends this message in order to remove one or more unicast or multicast
 * filters for the specified VSI.
 * PF removes the filters and returns status.
 */

struct i40e_virtchnl_ether_addr {
	u8 addr[ETH_ALEN];
	u8 pad[2];
};

struct i40e_virtchnl_ether_addr_list {
	u16 vsi_id;
	u16 num_elements;
	struct i40e_virtchnl_ether_addr list[1];
};

/* I40E_VIRTCHNL_OP_ADD_VLAN
 * VF sends this message to add one or more VLAN tag filters for receives.
 * PF adds the filters and returns status.
 * If a port VLAN is configured by the PF, this operation will return an
 * error to the VF.
 */

/* I40E_VIRTCHNL_OP_DEL_VLAN
 * VF sends this message to remove one or more VLAN tag filters for receives.
 * PF removes the filters and returns status.
 * If a port VLAN is configured by the PF, this operation will return an
 * error to the VF.
 */

struct i40e_virtchnl_vlan_filter_list {
	u16 vsi_id;
	u16 num_elements;
	u16 vlan_id[1];
};

/* I40E_VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE
 * VF sends VSI id and flags.
 * PF returns status code in retval.
 * Note: we assume that broadcast accept mode is always enabled.
 */
struct i40e_virtchnl_promisc_info {
	u16 vsi_id;
	u16 flags;
};

#define I40E_FLAG_VF_UNICAST_PROMISC	0x00000001
#define I40E_FLAG_VF_MULTICAST_PROMISC	0x00000002

/* I40E_VIRTCHNL_OP_GET_STATS
 * VF sends this message to request stats for the selected VSI. VF uses
 * the i40e_virtchnl_queue_select struct to specify the VSI. The queue_id
 * field is ignored by the PF.
 *
 * PF replies with struct i40e_eth_stats in an external buffer.
 */

/* I40E_VIRTCHNL_OP_EVENT
 * PF sends this message to inform the VF driver of events that may affect it.
 * No direct response is expected from the VF, though it may generate other
 * messages in response to this one.
 */
enum i40e_virtchnl_event_codes {
	I40E_VIRTCHNL_EVENT_UNKNOWN = 0,
	I40E_VIRTCHNL_EVENT_LINK_CHANGE,
	I40E_VIRTCHNL_EVENT_RESET_IMPENDING,
	I40E_VIRTCHNL_EVENT_PF_DRIVER_CLOSE,
};
#define I40E_PF_EVENT_SEVERITY_INFO		0
#define I40E_PF_EVENT_SEVERITY_CERTAIN_DOOM	255

struct i40e_virtchnl_pf_event {
	enum i40e_virtchnl_event_codes event;
	union {
		struct {
			enum i40e_aq_link_speed link_speed;
			bool link_status;
		} link_event;
	} event_data;

	int severity;
};

/* I40E_VIRTCHNL_OP_CONFIG_IWARP_IRQ_MAP
 * VF uses this message to request PF to map IWARP vectors to IWARP queues.
 * The request for this originates from the VF IWARP driver through
 * a client interface between VF LAN and VF IWARP driver.
 * A vector could have an AEQ and CEQ attached to it although
 * there is a single AEQ per VF IWARP instance in which case
 * most vectors will have an INVALID_IDX for aeq and valid idx for ceq.
 * There will never be a case where there will be multiple CEQs attached
 * to a single vector.
 * PF configures interrupt mapping and returns status.
 */

/* HW does not define a type value for AEQ; only for RX/TX and CEQ.
 * In order for us to keep the interface simple, SW will define a
 * unique type value for AEQ.
*/
#define I40E_QUEUE_TYPE_PE_AEQ  0x80
#define I40E_QUEUE_INVALID_IDX  0xFFFF

struct i40e_virtchnl_iwarp_qv_info {
	u32 v_idx; /* msix_vector */
	u16 ceq_idx;
	u16 aeq_idx;
	u8 itr_idx;
};

struct i40e_virtchnl_iwarp_qvlist_info {
	u32 num_vectors;
	struct i40e_virtchnl_iwarp_qv_info qv_info[1];
};

/* VF reset states - these are written into the RSTAT register:
 * I40E_VFGEN_RSTAT1 on the PF
 * I40E_VFGEN_RSTAT on the VF
 * When the PF initiates a reset, it writes 0
 * When the reset is complete, it writes 1
 * When the PF detects that the VF has recovered, it writes 2
 * VF checks this register periodically to determine if a reset has occurred,
 * then polls it to know when the reset is complete.
 * If either the PF or VF reads the register while the hardware
 * is in a reset state, it will return DEADBEEF, which, when masked
 * will result in 3.
 */
enum i40e_vfr_states {
	I40E_VFR_INPROGRESS = 0,
	I40E_VFR_COMPLETED,
	I40E_VFR_VFACTIVE,
	I40E_VFR_UNKNOWN,
};

#endif /* _I40E_VIRTCHNL_H_ */
Commit	Line	Data
5c3c48ac JB	1	/*******************************************************************************
	2	*
	3	* Intel Ethernet Controller XL710 Family Linux Driver
dc641b73	4	* Copyright(c) 2013 - 2014 Intel Corporation.
5c3c48ac JB	5	*
	6	* This program is free software; you can redistribute it and/or modify it
	7	* under the terms and conditions of the GNU General Public License,
	8	* version 2, as published by the Free Software Foundation.
	9	*
	10	* This program is distributed in the hope it will be useful, but WITHOUT
	11	* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
	12	* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
	13	* more details.
	14	*
dc641b73 GR	15	* You should have received a copy of the GNU General Public License along
dc641b73 GR	16	* with this program. If not, see <http://www.gnu.org/licenses/>.
5c3c48ac JB	17	*
	18	* The full GNU General Public License is included in this distribution in
	19	* the file called "COPYING".
	20	*
	21	* Contact Information:
	22	* e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
	23	* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
	24	*
	25	******************************************************************************/
	26
	27	#ifndef _I40E_VIRTCHNL_H_
	28	#define _I40E_VIRTCHNL_H_
	29
	30	#include "i40e_type.h"
	31
	32	/* Description:
	33	* This header file describes the VF-PF communication protocol used
	34	* by the various i40e drivers.
	35	*
	36	* Admin queue buffer usage:
	37	* desc->opcode is always i40e_aqc_opc_send_msg_to_pf
	38	* flags, retval, datalen, and data addr are all used normally.
	39	* Firmware copies the cookie fields when sending messages between the PF and
	40	* VF, but uses all other fields internally. Due to this limitation, we
	41	* must send all messages as "indirect", i.e. using an external buffer.
	42	*
	43	* All the vsi indexes are relative to the VF. Each VF can have maximum of
	44	* three VSIs. All the queue indexes are relative to the VSI. Each VF can
	45	* have a maximum of sixteen queues for all of its VSIs.
	46	*
	47	* The PF is required to return a status code in v_retval for all messages
	48	* except RESET_VF, which does not require any response. The return value is of
	49	* i40e_status_code type, defined in the i40e_type.h.
	50	*
	51	* In general, VF driver initialization should roughly follow the order of these
	52	* opcodes. The VF driver must first validate the API version of the PF driver,
	53	* then request a reset, then get resources, then configure queues and
	54	* interrupts. After these operations are complete, the VF driver may start
	55	* its queues, optionally add MAC and VLAN filters, and process traffic.
	56	*/
	57
	58	/* Opcodes for VF-PF communication. These are placed in the v_opcode field
	59	* of the virtchnl_msg structure.
	60	*/
	61	enum i40e_virtchnl_ops {
396642a6 NN	62	/* The PF sends status change events to VFs using
	63	* the I40E_VIRTCHNL_OP_EVENT opcode.
	64	* VFs send requests to the PF using the other ops.
5c3c48ac JB	65	*/
	66	I40E_VIRTCHNL_OP_UNKNOWN = 0,
	67	I40E_VIRTCHNL_OP_VERSION = 1, /* must ALWAYS be 1 */
396642a6 NN	68	I40E_VIRTCHNL_OP_RESET_VF = 2,
	69	I40E_VIRTCHNL_OP_GET_VF_RESOURCES = 3,
	70	I40E_VIRTCHNL_OP_CONFIG_TX_QUEUE = 4,
	71	I40E_VIRTCHNL_OP_CONFIG_RX_QUEUE = 5,
	72	I40E_VIRTCHNL_OP_CONFIG_VSI_QUEUES = 6,
	73	I40E_VIRTCHNL_OP_CONFIG_IRQ_MAP = 7,
	74	I40E_VIRTCHNL_OP_ENABLE_QUEUES = 8,
	75	I40E_VIRTCHNL_OP_DISABLE_QUEUES = 9,
	76	I40E_VIRTCHNL_OP_ADD_ETHER_ADDRESS = 10,
	77	I40E_VIRTCHNL_OP_DEL_ETHER_ADDRESS = 11,
	78	I40E_VIRTCHNL_OP_ADD_VLAN = 12,
	79	I40E_VIRTCHNL_OP_DEL_VLAN = 13,
	80	I40E_VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE = 14,
	81	I40E_VIRTCHNL_OP_GET_STATS = 15,
	82	I40E_VIRTCHNL_OP_FCOE = 16,
	83	I40E_VIRTCHNL_OP_EVENT = 17,
e3219ce6 ASJ	84	I40E_VIRTCHNL_OP_IWARP = 20,
	85	I40E_VIRTCHNL_OP_CONFIG_IWARP_IRQ_MAP = 21,
	86	I40E_VIRTCHNL_OP_RELEASE_IWARP_IRQ_MAP = 22,
5c3c48ac JB	87	};
	88
	89	/* Virtual channel message descriptor. This overlays the admin queue
	90	* descriptor. All other data is passed in external buffers.
	91	*/
	92
	93	struct i40e_virtchnl_msg {
	94	u8 pad[8]; /* AQ flags/opcode/len/retval fields */
	95	enum i40e_virtchnl_ops v_opcode; /* avoid confusion with desc->opcode */
	96	i40e_status v_retval; /* ditto for desc->retval */
	97	u32 vfid; /* used by PF when sending to VF */
	98	};
	99
	100	/* Message descriptions and data structures.*/
	101
	102	/* I40E_VIRTCHNL_OP_VERSION
	103	* VF posts its version number to the PF. PF responds with its version number
	104	* in the same format, along with a return code.
	105	* Reply from PF has its major/minor versions also in param0 and param1.
	106	* If there is a major version mismatch, then the VF cannot operate.
	107	* If there is a minor version mismatch, then the VF can operate but should
	108	* add a warning to the system log.
	109	*
	110	* This enum element MUST always be specified as == 1, regardless of other
	111	* changes in the API. The PF must always respond to this message without
	112	* error regardless of version mismatch.
	113	*/
	114	#define I40E_VIRTCHNL_VERSION_MAJOR 1
1b53c2fb MW	115	#define I40E_VIRTCHNL_VERSION_MINOR 1
	116	#define I40E_VIRTCHNL_VERSION_MINOR_NO_VF_CAPS 0
	117
5c3c48ac JB	118	struct i40e_virtchnl_version_info {
	119	u32 major;
	120	u32 minor;
	121	};
	122
	123	/* I40E_VIRTCHNL_OP_RESET_VF
	124	* VF sends this request to PF with no parameters
	125	* PF does NOT respond! VF driver must delay then poll VFGEN_RSTAT register
	126	* until reset completion is indicated. The admin queue must be reinitialized
	127	* after this operation.
	128	*
	129	* When reset is complete, PF must ensure that all queues in all VSIs associated
	130	* with the VF are stopped, all queue configurations in the HMC are set to 0,
	131	* and all MAC and VLAN filters (except the default MAC address) on all VSIs
	132	* are cleared.
	133	*/
	134
	135	/* I40E_VIRTCHNL_OP_GET_VF_RESOURCES
1b53c2fb MW	136	* Version 1.0 VF sends this request to PF with no parameters
1b53c2fb MW	137	* Version 1.1 VF sends this request to PF with u32 bitmap of its capabilities
5c3c48ac JB	138	* PF responds with an indirect message containing
	139	* i40e_virtchnl_vf_resource and one or more
	140	* i40e_virtchnl_vsi_resource structures.
	141	*/
	142
	143	struct i40e_virtchnl_vsi_resource {
	144	u16 vsi_id;
	145	u16 num_queue_pairs;
	146	enum i40e_vsi_type vsi_type;
	147	u16 qset_handle;
c02e0fd3	148	u8 default_mac_addr[ETH_ALEN];
5c3c48ac JB	149	};
5c3c48ac JB	150	/* VF offload flags */
1b53c2fb MW	151	#define I40E_VIRTCHNL_VF_OFFLOAD_L2 0x00000001
	152	#define I40E_VIRTCHNL_VF_OFFLOAD_IWARP 0x00000002
	153	#define I40E_VIRTCHNL_VF_OFFLOAD_FCOE 0x00000004
	154	#define I40E_VIRTCHNL_VF_OFFLOAD_RSS_AQ 0x00000008
	155	#define I40E_VIRTCHNL_VF_OFFLOAD_RSS_REG 0x00000010
1f012279	156	#define I40E_VIRTCHNL_VF_OFFLOAD_WB_ON_ITR 0x00000020
1b53c2fb	157	#define I40E_VIRTCHNL_VF_OFFLOAD_VLAN 0x00010000
b8262a6d	158	#define I40E_VIRTCHNL_VF_OFFLOAD_RX_POLLING 0x00020000
b9eacec3	159	#define I40E_VIRTCHNL_VF_OFFLOAD_RSS_PCTYPE_V2 0x00040000
5c3c48ac JB	160
	161	struct i40e_virtchnl_vf_resource {
	162	u16 num_vsis;
	163	u16 num_queue_pairs;
	164	u16 max_vectors;
	165	u16 max_mtu;
	166
	167	u32 vf_offload_flags;
	168	u32 max_fcoe_contexts;
	169	u32 max_fcoe_filters;
	170
	171	struct i40e_virtchnl_vsi_resource vsi_res[1];
	172	};
	173
	174	/* I40E_VIRTCHNL_OP_CONFIG_TX_QUEUE
	175	* VF sends this message to set up parameters for one TX queue.
	176	* External data buffer contains one instance of i40e_virtchnl_txq_info.
	177	* PF configures requested queue and returns a status code.
	178	*/
	179
	180	/* Tx queue config info */
	181	struct i40e_virtchnl_txq_info {
	182	u16 vsi_id;
	183	u16 queue_id;
	184	u16 ring_len; /* number of descriptors, multiple of 8 */
	185	u16 headwb_enabled;
	186	u64 dma_ring_addr;
	187	u64 dma_headwb_addr;
	188	};
	189
	190	/* I40E_VIRTCHNL_OP_CONFIG_RX_QUEUE
	191	* VF sends this message to set up parameters for one RX queue.
	192	* External data buffer contains one instance of i40e_virtchnl_rxq_info.
	193	* PF configures requested queue and returns a status code.
	194	*/
	195
	196	/* Rx queue config info */
	197	struct i40e_virtchnl_rxq_info {
	198	u16 vsi_id;
	199	u16 queue_id;
	200	u32 ring_len; /* number of descriptors, multiple of 32 */
	201	u16 hdr_size;
	202	u16 splithdr_enabled;
	203	u32 databuffer_size;
	204	u32 max_pkt_size;
	205	u64 dma_ring_addr;
	206	enum i40e_hmc_obj_rx_hsplit_0 rx_split_pos;
	207	};
	208
	209	/* I40E_VIRTCHNL_OP_CONFIG_VSI_QUEUES
	210	* VF sends this message to set parameters for all active TX and RX queues
	211	* associated with the specified VSI.
	212	* PF configures queues and returns status.
	213	* If the number of queues specified is greater than the number of queues
	214	* associated with the VSI, an error is returned and no queues are configured.
	215	*/
	216	struct i40e_virtchnl_queue_pair_info {
	217	/* NOTE: vsi_id and queue_id should be identical for both queues. */
	218	struct i40e_virtchnl_txq_info txq;
	219	struct i40e_virtchnl_rxq_info rxq;
	220	};
	221
	222	struct i40e_virtchnl_vsi_queue_config_info {
	223	u16 vsi_id;
224	u16 num_queue_pairs;
225	struct i40e_virtchnl_queue_pair_info qpair[1];
226	};
227
228	/* I40E_VIRTCHNL_OP_CONFIG_IRQ_MAP
229	* VF uses this message to map vectors to queues.
230	* The rxq_map and txq_map fields are bitmaps used to indicate which queues
231	* are to be associated with the specified vector.
232	* The "other" causes are always mapped to vector 0.
233	* PF configures interrupt mapping and returns status.
234	*/
235	struct i40e_virtchnl_vector_map {
236	u16 vsi_id;
237	u16 vector_id;
238	u16 rxq_map;
239	u16 txq_map;
240	u16 rxitr_idx;
241	u16 txitr_idx;
242	};
243
244	struct i40e_virtchnl_irq_map_info {
245	u16 num_vectors;
246	struct i40e_virtchnl_vector_map vecmap[1];
247	};
248
249	/* I40E_VIRTCHNL_OP_ENABLE_QUEUES
250	* I40E_VIRTCHNL_OP_DISABLE_QUEUES
251	* VF sends these message to enable or disable TX/RX queue pairs.
252	* The queues fields are bitmaps indicating which queues to act upon.
253	* (Currently, we only support 16 queues per VF, but we make the field
254	* u32 to allow for expansion.)
255	* PF performs requested action and returns status.
256	*/
257	struct i40e_virtchnl_queue_select {
258	u16 vsi_id;
259	u16 pad;
260	u32 rx_queues;
261	u32 tx_queues;
262	};
263
264	/* I40E_VIRTCHNL_OP_ADD_ETHER_ADDRESS
265	* VF sends this message in order to add one or more unicast or multicast
266	* address filters for the specified VSI.
267	* PF adds the filters and returns status.
268	*/
269
270	/* I40E_VIRTCHNL_OP_DEL_ETHER_ADDRESS
271	* VF sends this message in order to remove one or more unicast or multicast
272	* filters for the specified VSI.
273	* PF removes the filters and returns status.
274	*/
275
276	struct i40e_virtchnl_ether_addr {
c02e0fd3	277	u8 addr[ETH_ALEN];
5c3c48ac JB	278	u8 pad[2];
	279	};
	280
	281	struct i40e_virtchnl_ether_addr_list {
	282	u16 vsi_id;
	283	u16 num_elements;
	284	struct i40e_virtchnl_ether_addr list[1];
	285	};
	286
	287	/* I40E_VIRTCHNL_OP_ADD_VLAN
	288	* VF sends this message to add one or more VLAN tag filters for receives.
	289	* PF adds the filters and returns status.
	290	* If a port VLAN is configured by the PF, this operation will return an
	291	* error to the VF.
	292	*/
	293
	294	/* I40E_VIRTCHNL_OP_DEL_VLAN
	295	* VF sends this message to remove one or more VLAN tag filters for receives.
	296	* PF removes the filters and returns status.
	297	* If a port VLAN is configured by the PF, this operation will return an
	298	* error to the VF.
	299	*/
	300
	301	struct i40e_virtchnl_vlan_filter_list {
	302	u16 vsi_id;
	303	u16 num_elements;
	304	u16 vlan_id[1];
	305	};
	306
	307	/* I40E_VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE
	308	* VF sends VSI id and flags.
	309	* PF returns status code in retval.
	310	* Note: we assume that broadcast accept mode is always enabled.
	311	*/
	312	struct i40e_virtchnl_promisc_info {
	313	u16 vsi_id;
	314	u16 flags;
	315	};
	316
	317	#define I40E_FLAG_VF_UNICAST_PROMISC 0x00000001
	318	#define I40E_FLAG_VF_MULTICAST_PROMISC 0x00000002
	319
	320	/* I40E_VIRTCHNL_OP_GET_STATS
	321	* VF sends this message to request stats for the selected VSI. VF uses
	322	* the i40e_virtchnl_queue_select struct to specify the VSI. The queue_id
	323	* field is ignored by the PF.
	324	*
	325	* PF replies with struct i40e_eth_stats in an external buffer.
	326	*/
	327
	328	/* I40E_VIRTCHNL_OP_EVENT
	329	* PF sends this message to inform the VF driver of events that may affect it.
	330	* No direct response is expected from the VF, though it may generate other
	331	* messages in response to this one.
	332	*/
	333	enum i40e_virtchnl_event_codes {
	334	I40E_VIRTCHNL_EVENT_UNKNOWN = 0,
	335	I40E_VIRTCHNL_EVENT_LINK_CHANGE,
	336	I40E_VIRTCHNL_EVENT_RESET_IMPENDING,
	337	I40E_VIRTCHNL_EVENT_PF_DRIVER_CLOSE,
	338	};
	339	#define I40E_PF_EVENT_SEVERITY_INFO 0
	340	#define I40E_PF_EVENT_SEVERITY_CERTAIN_DOOM 255
	341
342	struct i40e_virtchnl_pf_event {
343	enum i40e_virtchnl_event_codes event;
344	union {
345	struct {
346	enum i40e_aq_link_speed link_speed;
347	bool link_status;
348	} link_event;
349	} event_data;
350
351	int severity;
352	};
353
e3219ce6 ASJ	354	/* I40E_VIRTCHNL_OP_CONFIG_IWARP_IRQ_MAP
	355	* VF uses this message to request PF to map IWARP vectors to IWARP queues.
	356	* The request for this originates from the VF IWARP driver through
	357	* a client interface between VF LAN and VF IWARP driver.
	358	* A vector could have an AEQ and CEQ attached to it although
	359	* there is a single AEQ per VF IWARP instance in which case
	360	* most vectors will have an INVALID_IDX for aeq and valid idx for ceq.
	361	* There will never be a case where there will be multiple CEQs attached
	362	* to a single vector.
	363	* PF configures interrupt mapping and returns status.
	364	*/
	365
	366	/* HW does not define a type value for AEQ; only for RX/TX and CEQ.
	367	* In order for us to keep the interface simple, SW will define a
	368	* unique type value for AEQ.
	369	*/
	370	#define I40E_QUEUE_TYPE_PE_AEQ 0x80
	371	#define I40E_QUEUE_INVALID_IDX 0xFFFF
	372
	373	struct i40e_virtchnl_iwarp_qv_info {
	374	u32 v_idx; /* msix_vector */
	375	u16 ceq_idx;
	376	u16 aeq_idx;
	377	u8 itr_idx;
	378	};
	379
	380	struct i40e_virtchnl_iwarp_qvlist_info {
	381	u32 num_vectors;
	382	struct i40e_virtchnl_iwarp_qv_info qv_info[1];
	383	};
	384
5c3c48ac JB	385	/* VF reset states - these are written into the RSTAT register:
	386	* I40E_VFGEN_RSTAT1 on the PF
	387	* I40E_VFGEN_RSTAT on the VF
	388	* When the PF initiates a reset, it writes 0
	389	* When the reset is complete, it writes 1
	390	* When the PF detects that the VF has recovered, it writes 2
	391	* VF checks this register periodically to determine if a reset has occurred,
	392	* then polls it to know when the reset is complete.
	393	* If either the PF or VF reads the register while the hardware
	394	* is in a reset state, it will return DEADBEEF, which, when masked
	395	* will result in 3.
	396	*/
	397	enum i40e_vfr_states {
	398	I40E_VFR_INPROGRESS = 0,
	399	I40E_VFR_COMPLETED,
	400	I40E_VFR_VFACTIVE,
	401	I40E_VFR_UNKNOWN,
	402	};
	403
	404	#endif /* _I40E_VIRTCHNL_H_ */