Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * Fast Ethernet Controller (FEC) driver for Motorola MPC8xx. | |
3 | * Copyright (c) 1997 Dan Malek (dmalek@jlc.net) | |
4 | * | |
5 | * This version of the driver is specific to the FADS implementation, | |
6 | * since the board contains control registers external to the processor | |
7 | * for the control of the LevelOne LXT970 transceiver. The MPC860T manual | |
8 | * describes connections using the internal parallel port I/O, which | |
9 | * is basically all of Port D. | |
10 | * | |
7dd6a2aa | 11 | * Right now, I am very wasteful with the buffers. I allocate memory |
1da177e4 LT |
12 | * pages and then divide them into 2K frame buffers. This way I know I |
13 | * have buffers large enough to hold one frame within one buffer descriptor. | |
14 | * Once I get this working, I will use 64 or 128 byte CPM buffers, which | |
15 | * will be much more memory efficient and will easily handle lots of | |
16 | * small packets. | |
17 | * | |
18 | * Much better multiple PHY support by Magnus Damm. | |
19 | * Copyright (c) 2000 Ericsson Radio Systems AB. | |
20 | * | |
562d2f8c GU |
21 | * Support for FEC controller of ColdFire processors. |
22 | * Copyright (c) 2001-2005 Greg Ungerer (gerg@snapgear.com) | |
7dd6a2aa GU |
23 | * |
24 | * Bug fixes and cleanup by Philippe De Muyter (phdm@macqel.be) | |
677177c5 | 25 | * Copyright (c) 2004-2006 Macq Electronique SA. |
1da177e4 LT |
26 | */ |
27 | ||
28 | #include <linux/config.h> | |
29 | #include <linux/module.h> | |
30 | #include <linux/kernel.h> | |
31 | #include <linux/string.h> | |
32 | #include <linux/ptrace.h> | |
33 | #include <linux/errno.h> | |
34 | #include <linux/ioport.h> | |
35 | #include <linux/slab.h> | |
36 | #include <linux/interrupt.h> | |
37 | #include <linux/pci.h> | |
38 | #include <linux/init.h> | |
39 | #include <linux/delay.h> | |
40 | #include <linux/netdevice.h> | |
41 | #include <linux/etherdevice.h> | |
42 | #include <linux/skbuff.h> | |
43 | #include <linux/spinlock.h> | |
44 | #include <linux/workqueue.h> | |
45 | #include <linux/bitops.h> | |
46 | ||
47 | #include <asm/irq.h> | |
48 | #include <asm/uaccess.h> | |
49 | #include <asm/io.h> | |
50 | #include <asm/pgtable.h> | |
51 | ||
7dd6a2aa | 52 | #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || \ |
562d2f8c | 53 | defined(CONFIG_M5272) || defined(CONFIG_M528x) || \ |
6b265293 | 54 | defined(CONFIG_M520x) || defined(CONFIG_M532x) |
1da177e4 LT |
55 | #include <asm/coldfire.h> |
56 | #include <asm/mcfsim.h> | |
57 | #include "fec.h" | |
58 | #else | |
59 | #include <asm/8xx_immap.h> | |
60 | #include <asm/mpc8xx.h> | |
61 | #include "commproc.h" | |
62 | #endif | |
63 | ||
64 | #if defined(CONFIG_FEC2) | |
65 | #define FEC_MAX_PORTS 2 | |
66 | #else | |
67 | #define FEC_MAX_PORTS 1 | |
68 | #endif | |
69 | ||
70 | /* | |
71 | * Define the fixed address of the FEC hardware. | |
72 | */ | |
73 | static unsigned int fec_hw[] = { | |
74 | #if defined(CONFIG_M5272) | |
75 | (MCF_MBAR + 0x840), | |
76 | #elif defined(CONFIG_M527x) | |
77 | (MCF_MBAR + 0x1000), | |
78 | (MCF_MBAR + 0x1800), | |
7dd6a2aa | 79 | #elif defined(CONFIG_M523x) || defined(CONFIG_M528x) |
1da177e4 | 80 | (MCF_MBAR + 0x1000), |
562d2f8c GU |
81 | #elif defined(CONFIG_M520x) |
82 | (MCF_MBAR+0x30000), | |
6b265293 MW |
83 | #elif defined(CONFIG_M532x) |
84 | (MCF_MBAR+0xfc030000), | |
1da177e4 LT |
85 | #else |
86 | &(((immap_t *)IMAP_ADDR)->im_cpm.cp_fec), | |
87 | #endif | |
88 | }; | |
89 | ||
90 | static unsigned char fec_mac_default[] = { | |
91 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | |
92 | }; | |
93 | ||
94 | /* | |
95 | * Some hardware gets it MAC address out of local flash memory. | |
96 | * if this is non-zero then assume it is the address to get MAC from. | |
97 | */ | |
98 | #if defined(CONFIG_NETtel) | |
99 | #define FEC_FLASHMAC 0xf0006006 | |
100 | #elif defined(CONFIG_GILBARCONAP) || defined(CONFIG_SCALES) | |
101 | #define FEC_FLASHMAC 0xf0006000 | |
102 | #elif defined (CONFIG_MTD_KeyTechnology) | |
103 | #define FEC_FLASHMAC 0xffe04000 | |
104 | #elif defined(CONFIG_CANCam) | |
105 | #define FEC_FLASHMAC 0xf0020000 | |
7dd6a2aa GU |
106 | #elif defined (CONFIG_M5272C3) |
107 | #define FEC_FLASHMAC (0xffe04000 + 4) | |
108 | #elif defined(CONFIG_MOD5272) | |
109 | #define FEC_FLASHMAC 0xffc0406b | |
1da177e4 LT |
110 | #else |
111 | #define FEC_FLASHMAC 0 | |
112 | #endif | |
113 | ||
1da177e4 LT |
114 | /* Forward declarations of some structures to support different PHYs |
115 | */ | |
116 | ||
117 | typedef struct { | |
118 | uint mii_data; | |
119 | void (*funct)(uint mii_reg, struct net_device *dev); | |
120 | } phy_cmd_t; | |
121 | ||
122 | typedef struct { | |
123 | uint id; | |
124 | char *name; | |
125 | ||
126 | const phy_cmd_t *config; | |
127 | const phy_cmd_t *startup; | |
128 | const phy_cmd_t *ack_int; | |
129 | const phy_cmd_t *shutdown; | |
130 | } phy_info_t; | |
131 | ||
132 | /* The number of Tx and Rx buffers. These are allocated from the page | |
133 | * pool. The code may assume these are power of two, so it it best | |
134 | * to keep them that size. | |
135 | * We don't need to allocate pages for the transmitter. We just use | |
136 | * the skbuffer directly. | |
137 | */ | |
138 | #define FEC_ENET_RX_PAGES 8 | |
139 | #define FEC_ENET_RX_FRSIZE 2048 | |
140 | #define FEC_ENET_RX_FRPPG (PAGE_SIZE / FEC_ENET_RX_FRSIZE) | |
141 | #define RX_RING_SIZE (FEC_ENET_RX_FRPPG * FEC_ENET_RX_PAGES) | |
142 | #define FEC_ENET_TX_FRSIZE 2048 | |
143 | #define FEC_ENET_TX_FRPPG (PAGE_SIZE / FEC_ENET_TX_FRSIZE) | |
144 | #define TX_RING_SIZE 16 /* Must be power of two */ | |
145 | #define TX_RING_MOD_MASK 15 /* for this to work */ | |
146 | ||
562d2f8c | 147 | #if (((RX_RING_SIZE + TX_RING_SIZE) * 8) > PAGE_SIZE) |
6b265293 | 148 | #error "FEC: descriptor ring size constants too large" |
562d2f8c GU |
149 | #endif |
150 | ||
1da177e4 LT |
151 | /* Interrupt events/masks. |
152 | */ | |
153 | #define FEC_ENET_HBERR ((uint)0x80000000) /* Heartbeat error */ | |
154 | #define FEC_ENET_BABR ((uint)0x40000000) /* Babbling receiver */ | |
155 | #define FEC_ENET_BABT ((uint)0x20000000) /* Babbling transmitter */ | |
156 | #define FEC_ENET_GRA ((uint)0x10000000) /* Graceful stop complete */ | |
157 | #define FEC_ENET_TXF ((uint)0x08000000) /* Full frame transmitted */ | |
158 | #define FEC_ENET_TXB ((uint)0x04000000) /* A buffer was transmitted */ | |
159 | #define FEC_ENET_RXF ((uint)0x02000000) /* Full frame received */ | |
160 | #define FEC_ENET_RXB ((uint)0x01000000) /* A buffer was received */ | |
161 | #define FEC_ENET_MII ((uint)0x00800000) /* MII interrupt */ | |
162 | #define FEC_ENET_EBERR ((uint)0x00400000) /* SDMA bus error */ | |
163 | ||
164 | /* The FEC stores dest/src/type, data, and checksum for receive packets. | |
165 | */ | |
166 | #define PKT_MAXBUF_SIZE 1518 | |
167 | #define PKT_MINBUF_SIZE 64 | |
168 | #define PKT_MAXBLR_SIZE 1520 | |
169 | ||
170 | ||
171 | /* | |
6b265293 | 172 | * The 5270/5271/5280/5282/532x RX control register also contains maximum frame |
1da177e4 LT |
173 | * size bits. Other FEC hardware does not, so we need to take that into |
174 | * account when setting it. | |
175 | */ | |
562d2f8c | 176 | #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ |
6b265293 | 177 | defined(CONFIG_M520x) || defined(CONFIG_M532x) |
1da177e4 LT |
178 | #define OPT_FRAME_SIZE (PKT_MAXBUF_SIZE << 16) |
179 | #else | |
180 | #define OPT_FRAME_SIZE 0 | |
181 | #endif | |
182 | ||
183 | /* The FEC buffer descriptors track the ring buffers. The rx_bd_base and | |
184 | * tx_bd_base always point to the base of the buffer descriptors. The | |
185 | * cur_rx and cur_tx point to the currently available buffer. | |
186 | * The dirty_tx tracks the current buffer that is being sent by the | |
187 | * controller. The cur_tx and dirty_tx are equal under both completely | |
188 | * empty and completely full conditions. The empty/ready indicator in | |
189 | * the buffer descriptor determines the actual condition. | |
190 | */ | |
191 | struct fec_enet_private { | |
192 | /* Hardware registers of the FEC device */ | |
193 | volatile fec_t *hwp; | |
194 | ||
195 | /* The saved address of a sent-in-place packet/buffer, for skfree(). */ | |
196 | unsigned char *tx_bounce[TX_RING_SIZE]; | |
197 | struct sk_buff* tx_skbuff[TX_RING_SIZE]; | |
198 | ushort skb_cur; | |
199 | ushort skb_dirty; | |
200 | ||
201 | /* CPM dual port RAM relative addresses. | |
202 | */ | |
203 | cbd_t *rx_bd_base; /* Address of Rx and Tx buffers. */ | |
204 | cbd_t *tx_bd_base; | |
205 | cbd_t *cur_rx, *cur_tx; /* The next free ring entry */ | |
206 | cbd_t *dirty_tx; /* The ring entries to be free()ed. */ | |
207 | struct net_device_stats stats; | |
208 | uint tx_full; | |
209 | spinlock_t lock; | |
210 | ||
211 | uint phy_id; | |
212 | uint phy_id_done; | |
213 | uint phy_status; | |
214 | uint phy_speed; | |
7dd6a2aa | 215 | phy_info_t const *phy; |
1da177e4 LT |
216 | struct work_struct phy_task; |
217 | ||
218 | uint sequence_done; | |
219 | uint mii_phy_task_queued; | |
220 | ||
221 | uint phy_addr; | |
222 | ||
223 | int index; | |
224 | int opened; | |
225 | int link; | |
226 | int old_link; | |
227 | int full_duplex; | |
1da177e4 LT |
228 | }; |
229 | ||
230 | static int fec_enet_open(struct net_device *dev); | |
231 | static int fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev); | |
232 | static void fec_enet_mii(struct net_device *dev); | |
233 | static irqreturn_t fec_enet_interrupt(int irq, void * dev_id, struct pt_regs * regs); | |
234 | static void fec_enet_tx(struct net_device *dev); | |
235 | static void fec_enet_rx(struct net_device *dev); | |
236 | static int fec_enet_close(struct net_device *dev); | |
237 | static struct net_device_stats *fec_enet_get_stats(struct net_device *dev); | |
238 | static void set_multicast_list(struct net_device *dev); | |
239 | static void fec_restart(struct net_device *dev, int duplex); | |
240 | static void fec_stop(struct net_device *dev); | |
241 | static void fec_set_mac_address(struct net_device *dev); | |
242 | ||
243 | ||
244 | /* MII processing. We keep this as simple as possible. Requests are | |
245 | * placed on the list (if there is room). When the request is finished | |
246 | * by the MII, an optional function may be called. | |
247 | */ | |
248 | typedef struct mii_list { | |
249 | uint mii_regval; | |
250 | void (*mii_func)(uint val, struct net_device *dev); | |
251 | struct mii_list *mii_next; | |
252 | } mii_list_t; | |
253 | ||
254 | #define NMII 20 | |
7dd6a2aa GU |
255 | static mii_list_t mii_cmds[NMII]; |
256 | static mii_list_t *mii_free; | |
257 | static mii_list_t *mii_head; | |
258 | static mii_list_t *mii_tail; | |
1da177e4 LT |
259 | |
260 | static int mii_queue(struct net_device *dev, int request, | |
261 | void (*func)(uint, struct net_device *)); | |
262 | ||
263 | /* Make MII read/write commands for the FEC. | |
264 | */ | |
265 | #define mk_mii_read(REG) (0x60020000 | ((REG & 0x1f) << 18)) | |
266 | #define mk_mii_write(REG, VAL) (0x50020000 | ((REG & 0x1f) << 18) | \ | |
267 | (VAL & 0xffff)) | |
268 | #define mk_mii_end 0 | |
269 | ||
270 | /* Transmitter timeout. | |
271 | */ | |
272 | #define TX_TIMEOUT (2*HZ) | |
273 | ||
274 | /* Register definitions for the PHY. | |
275 | */ | |
276 | ||
277 | #define MII_REG_CR 0 /* Control Register */ | |
278 | #define MII_REG_SR 1 /* Status Register */ | |
279 | #define MII_REG_PHYIR1 2 /* PHY Identification Register 1 */ | |
280 | #define MII_REG_PHYIR2 3 /* PHY Identification Register 2 */ | |
281 | #define MII_REG_ANAR 4 /* A-N Advertisement Register */ | |
282 | #define MII_REG_ANLPAR 5 /* A-N Link Partner Ability Register */ | |
283 | #define MII_REG_ANER 6 /* A-N Expansion Register */ | |
284 | #define MII_REG_ANNPTR 7 /* A-N Next Page Transmit Register */ | |
285 | #define MII_REG_ANLPRNPR 8 /* A-N Link Partner Received Next Page Reg. */ | |
286 | ||
287 | /* values for phy_status */ | |
288 | ||
289 | #define PHY_CONF_ANE 0x0001 /* 1 auto-negotiation enabled */ | |
290 | #define PHY_CONF_LOOP 0x0002 /* 1 loopback mode enabled */ | |
291 | #define PHY_CONF_SPMASK 0x00f0 /* mask for speed */ | |
292 | #define PHY_CONF_10HDX 0x0010 /* 10 Mbit half duplex supported */ | |
293 | #define PHY_CONF_10FDX 0x0020 /* 10 Mbit full duplex supported */ | |
294 | #define PHY_CONF_100HDX 0x0040 /* 100 Mbit half duplex supported */ | |
295 | #define PHY_CONF_100FDX 0x0080 /* 100 Mbit full duplex supported */ | |
296 | ||
297 | #define PHY_STAT_LINK 0x0100 /* 1 up - 0 down */ | |
298 | #define PHY_STAT_FAULT 0x0200 /* 1 remote fault */ | |
299 | #define PHY_STAT_ANC 0x0400 /* 1 auto-negotiation complete */ | |
300 | #define PHY_STAT_SPMASK 0xf000 /* mask for speed */ | |
301 | #define PHY_STAT_10HDX 0x1000 /* 10 Mbit half duplex selected */ | |
302 | #define PHY_STAT_10FDX 0x2000 /* 10 Mbit full duplex selected */ | |
303 | #define PHY_STAT_100HDX 0x4000 /* 100 Mbit half duplex selected */ | |
304 | #define PHY_STAT_100FDX 0x8000 /* 100 Mbit full duplex selected */ | |
305 | ||
306 | ||
307 | static int | |
308 | fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev) | |
309 | { | |
310 | struct fec_enet_private *fep; | |
311 | volatile fec_t *fecp; | |
312 | volatile cbd_t *bdp; | |
313 | ||
314 | fep = netdev_priv(dev); | |
315 | fecp = (volatile fec_t*)dev->base_addr; | |
316 | ||
317 | if (!fep->link) { | |
318 | /* Link is down or autonegotiation is in progress. */ | |
319 | return 1; | |
320 | } | |
321 | ||
322 | /* Fill in a Tx ring entry */ | |
323 | bdp = fep->cur_tx; | |
324 | ||
325 | #ifndef final_version | |
326 | if (bdp->cbd_sc & BD_ENET_TX_READY) { | |
327 | /* Ooops. All transmit buffers are full. Bail out. | |
328 | * This should not happen, since dev->tbusy should be set. | |
329 | */ | |
330 | printk("%s: tx queue full!.\n", dev->name); | |
331 | return 1; | |
332 | } | |
333 | #endif | |
334 | ||
335 | /* Clear all of the status flags. | |
336 | */ | |
337 | bdp->cbd_sc &= ~BD_ENET_TX_STATS; | |
338 | ||
339 | /* Set buffer length and buffer pointer. | |
340 | */ | |
341 | bdp->cbd_bufaddr = __pa(skb->data); | |
342 | bdp->cbd_datlen = skb->len; | |
343 | ||
344 | /* | |
345 | * On some FEC implementations data must be aligned on | |
346 | * 4-byte boundaries. Use bounce buffers to copy data | |
347 | * and get it aligned. Ugh. | |
348 | */ | |
349 | if (bdp->cbd_bufaddr & 0x3) { | |
350 | unsigned int index; | |
351 | index = bdp - fep->tx_bd_base; | |
352 | memcpy(fep->tx_bounce[index], (void *) bdp->cbd_bufaddr, bdp->cbd_datlen); | |
353 | bdp->cbd_bufaddr = __pa(fep->tx_bounce[index]); | |
354 | } | |
355 | ||
356 | /* Save skb pointer. | |
357 | */ | |
358 | fep->tx_skbuff[fep->skb_cur] = skb; | |
359 | ||
360 | fep->stats.tx_bytes += skb->len; | |
361 | fep->skb_cur = (fep->skb_cur+1) & TX_RING_MOD_MASK; | |
362 | ||
363 | /* Push the data cache so the CPM does not get stale memory | |
364 | * data. | |
365 | */ | |
366 | flush_dcache_range((unsigned long)skb->data, | |
367 | (unsigned long)skb->data + skb->len); | |
368 | ||
369 | spin_lock_irq(&fep->lock); | |
370 | ||
371 | /* Send it on its way. Tell FEC its ready, interrupt when done, | |
372 | * its the last BD of the frame, and to put the CRC on the end. | |
373 | */ | |
374 | ||
375 | bdp->cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_INTR | |
376 | | BD_ENET_TX_LAST | BD_ENET_TX_TC); | |
377 | ||
378 | dev->trans_start = jiffies; | |
379 | ||
380 | /* Trigger transmission start */ | |
381 | fecp->fec_x_des_active = 0x01000000; | |
382 | ||
383 | /* If this was the last BD in the ring, start at the beginning again. | |
384 | */ | |
385 | if (bdp->cbd_sc & BD_ENET_TX_WRAP) { | |
386 | bdp = fep->tx_bd_base; | |
387 | } else { | |
388 | bdp++; | |
389 | } | |
390 | ||
391 | if (bdp == fep->dirty_tx) { | |
392 | fep->tx_full = 1; | |
393 | netif_stop_queue(dev); | |
394 | } | |
395 | ||
396 | fep->cur_tx = (cbd_t *)bdp; | |
397 | ||
398 | spin_unlock_irq(&fep->lock); | |
399 | ||
400 | return 0; | |
401 | } | |
402 | ||
403 | static void | |
404 | fec_timeout(struct net_device *dev) | |
405 | { | |
406 | struct fec_enet_private *fep = netdev_priv(dev); | |
407 | ||
408 | printk("%s: transmit timed out.\n", dev->name); | |
409 | fep->stats.tx_errors++; | |
410 | #ifndef final_version | |
411 | { | |
412 | int i; | |
413 | cbd_t *bdp; | |
414 | ||
415 | printk("Ring data dump: cur_tx %lx%s, dirty_tx %lx cur_rx: %lx\n", | |
416 | (unsigned long)fep->cur_tx, fep->tx_full ? " (full)" : "", | |
417 | (unsigned long)fep->dirty_tx, | |
418 | (unsigned long)fep->cur_rx); | |
419 | ||
420 | bdp = fep->tx_bd_base; | |
421 | printk(" tx: %u buffers\n", TX_RING_SIZE); | |
422 | for (i = 0 ; i < TX_RING_SIZE; i++) { | |
423 | printk(" %08x: %04x %04x %08x\n", | |
424 | (uint) bdp, | |
425 | bdp->cbd_sc, | |
426 | bdp->cbd_datlen, | |
427 | (int) bdp->cbd_bufaddr); | |
428 | bdp++; | |
429 | } | |
430 | ||
431 | bdp = fep->rx_bd_base; | |
432 | printk(" rx: %lu buffers\n", (unsigned long) RX_RING_SIZE); | |
433 | for (i = 0 ; i < RX_RING_SIZE; i++) { | |
434 | printk(" %08x: %04x %04x %08x\n", | |
435 | (uint) bdp, | |
436 | bdp->cbd_sc, | |
437 | bdp->cbd_datlen, | |
438 | (int) bdp->cbd_bufaddr); | |
439 | bdp++; | |
440 | } | |
441 | } | |
442 | #endif | |
7dd6a2aa | 443 | fec_restart(dev, fep->full_duplex); |
1da177e4 LT |
444 | netif_wake_queue(dev); |
445 | } | |
446 | ||
447 | /* The interrupt handler. | |
448 | * This is called from the MPC core interrupt. | |
449 | */ | |
450 | static irqreturn_t | |
451 | fec_enet_interrupt(int irq, void * dev_id, struct pt_regs * regs) | |
452 | { | |
453 | struct net_device *dev = dev_id; | |
454 | volatile fec_t *fecp; | |
455 | uint int_events; | |
456 | int handled = 0; | |
457 | ||
458 | fecp = (volatile fec_t*)dev->base_addr; | |
459 | ||
460 | /* Get the interrupt events that caused us to be here. | |
461 | */ | |
462 | while ((int_events = fecp->fec_ievent) != 0) { | |
463 | fecp->fec_ievent = int_events; | |
464 | ||
465 | /* Handle receive event in its own function. | |
466 | */ | |
467 | if (int_events & FEC_ENET_RXF) { | |
468 | handled = 1; | |
469 | fec_enet_rx(dev); | |
470 | } | |
471 | ||
472 | /* Transmit OK, or non-fatal error. Update the buffer | |
473 | descriptors. FEC handles all errors, we just discover | |
474 | them as part of the transmit process. | |
475 | */ | |
476 | if (int_events & FEC_ENET_TXF) { | |
477 | handled = 1; | |
478 | fec_enet_tx(dev); | |
479 | } | |
480 | ||
481 | if (int_events & FEC_ENET_MII) { | |
482 | handled = 1; | |
483 | fec_enet_mii(dev); | |
484 | } | |
485 | ||
486 | } | |
487 | return IRQ_RETVAL(handled); | |
488 | } | |
489 | ||
490 | ||
491 | static void | |
492 | fec_enet_tx(struct net_device *dev) | |
493 | { | |
494 | struct fec_enet_private *fep; | |
495 | volatile cbd_t *bdp; | |
496 | struct sk_buff *skb; | |
497 | ||
498 | fep = netdev_priv(dev); | |
499 | spin_lock(&fep->lock); | |
500 | bdp = fep->dirty_tx; | |
501 | ||
502 | while ((bdp->cbd_sc&BD_ENET_TX_READY) == 0) { | |
503 | if (bdp == fep->cur_tx && fep->tx_full == 0) break; | |
504 | ||
505 | skb = fep->tx_skbuff[fep->skb_dirty]; | |
506 | /* Check for errors. */ | |
507 | if (bdp->cbd_sc & (BD_ENET_TX_HB | BD_ENET_TX_LC | | |
508 | BD_ENET_TX_RL | BD_ENET_TX_UN | | |
509 | BD_ENET_TX_CSL)) { | |
510 | fep->stats.tx_errors++; | |
511 | if (bdp->cbd_sc & BD_ENET_TX_HB) /* No heartbeat */ | |
512 | fep->stats.tx_heartbeat_errors++; | |
513 | if (bdp->cbd_sc & BD_ENET_TX_LC) /* Late collision */ | |
514 | fep->stats.tx_window_errors++; | |
515 | if (bdp->cbd_sc & BD_ENET_TX_RL) /* Retrans limit */ | |
516 | fep->stats.tx_aborted_errors++; | |
517 | if (bdp->cbd_sc & BD_ENET_TX_UN) /* Underrun */ | |
518 | fep->stats.tx_fifo_errors++; | |
519 | if (bdp->cbd_sc & BD_ENET_TX_CSL) /* Carrier lost */ | |
520 | fep->stats.tx_carrier_errors++; | |
521 | } else { | |
522 | fep->stats.tx_packets++; | |
523 | } | |
524 | ||
525 | #ifndef final_version | |
526 | if (bdp->cbd_sc & BD_ENET_TX_READY) | |
527 | printk("HEY! Enet xmit interrupt and TX_READY.\n"); | |
528 | #endif | |
529 | /* Deferred means some collisions occurred during transmit, | |
530 | * but we eventually sent the packet OK. | |
531 | */ | |
532 | if (bdp->cbd_sc & BD_ENET_TX_DEF) | |
533 | fep->stats.collisions++; | |
534 | ||
535 | /* Free the sk buffer associated with this last transmit. | |
536 | */ | |
537 | dev_kfree_skb_any(skb); | |
538 | fep->tx_skbuff[fep->skb_dirty] = NULL; | |
539 | fep->skb_dirty = (fep->skb_dirty + 1) & TX_RING_MOD_MASK; | |
540 | ||
541 | /* Update pointer to next buffer descriptor to be transmitted. | |
542 | */ | |
543 | if (bdp->cbd_sc & BD_ENET_TX_WRAP) | |
544 | bdp = fep->tx_bd_base; | |
545 | else | |
546 | bdp++; | |
547 | ||
548 | /* Since we have freed up a buffer, the ring is no longer | |
549 | * full. | |
550 | */ | |
551 | if (fep->tx_full) { | |
552 | fep->tx_full = 0; | |
553 | if (netif_queue_stopped(dev)) | |
554 | netif_wake_queue(dev); | |
555 | } | |
556 | } | |
557 | fep->dirty_tx = (cbd_t *)bdp; | |
558 | spin_unlock(&fep->lock); | |
559 | } | |
560 | ||
561 | ||
562 | /* During a receive, the cur_rx points to the current incoming buffer. | |
563 | * When we update through the ring, if the next incoming buffer has | |
564 | * not been given to the system, we just set the empty indicator, | |
565 | * effectively tossing the packet. | |
566 | */ | |
567 | static void | |
568 | fec_enet_rx(struct net_device *dev) | |
569 | { | |
570 | struct fec_enet_private *fep; | |
571 | volatile fec_t *fecp; | |
572 | volatile cbd_t *bdp; | |
573 | struct sk_buff *skb; | |
574 | ushort pkt_len; | |
575 | __u8 *data; | |
576 | ||
577 | fep = netdev_priv(dev); | |
578 | fecp = (volatile fec_t*)dev->base_addr; | |
579 | ||
580 | /* First, grab all of the stats for the incoming packet. | |
581 | * These get messed up if we get called due to a busy condition. | |
582 | */ | |
583 | bdp = fep->cur_rx; | |
584 | ||
585 | while (!(bdp->cbd_sc & BD_ENET_RX_EMPTY)) { | |
586 | ||
587 | #ifndef final_version | |
588 | /* Since we have allocated space to hold a complete frame, | |
589 | * the last indicator should be set. | |
590 | */ | |
591 | if ((bdp->cbd_sc & BD_ENET_RX_LAST) == 0) | |
592 | printk("FEC ENET: rcv is not +last\n"); | |
593 | #endif | |
594 | ||
595 | if (!fep->opened) | |
596 | goto rx_processing_done; | |
597 | ||
598 | /* Check for errors. */ | |
599 | if (bdp->cbd_sc & (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_NO | | |
600 | BD_ENET_RX_CR | BD_ENET_RX_OV)) { | |
601 | fep->stats.rx_errors++; | |
602 | if (bdp->cbd_sc & (BD_ENET_RX_LG | BD_ENET_RX_SH)) { | |
603 | /* Frame too long or too short. */ | |
604 | fep->stats.rx_length_errors++; | |
605 | } | |
606 | if (bdp->cbd_sc & BD_ENET_RX_NO) /* Frame alignment */ | |
607 | fep->stats.rx_frame_errors++; | |
608 | if (bdp->cbd_sc & BD_ENET_RX_CR) /* CRC Error */ | |
609 | fep->stats.rx_crc_errors++; | |
610 | if (bdp->cbd_sc & BD_ENET_RX_OV) /* FIFO overrun */ | |
611 | fep->stats.rx_crc_errors++; | |
612 | } | |
613 | ||
614 | /* Report late collisions as a frame error. | |
615 | * On this error, the BD is closed, but we don't know what we | |
616 | * have in the buffer. So, just drop this frame on the floor. | |
617 | */ | |
618 | if (bdp->cbd_sc & BD_ENET_RX_CL) { | |
619 | fep->stats.rx_errors++; | |
620 | fep->stats.rx_frame_errors++; | |
621 | goto rx_processing_done; | |
622 | } | |
623 | ||
624 | /* Process the incoming frame. | |
625 | */ | |
626 | fep->stats.rx_packets++; | |
627 | pkt_len = bdp->cbd_datlen; | |
628 | fep->stats.rx_bytes += pkt_len; | |
629 | data = (__u8*)__va(bdp->cbd_bufaddr); | |
630 | ||
631 | /* This does 16 byte alignment, exactly what we need. | |
632 | * The packet length includes FCS, but we don't want to | |
633 | * include that when passing upstream as it messes up | |
634 | * bridging applications. | |
635 | */ | |
636 | skb = dev_alloc_skb(pkt_len-4); | |
637 | ||
638 | if (skb == NULL) { | |
639 | printk("%s: Memory squeeze, dropping packet.\n", dev->name); | |
640 | fep->stats.rx_dropped++; | |
641 | } else { | |
642 | skb->dev = dev; | |
643 | skb_put(skb,pkt_len-4); /* Make room */ | |
644 | eth_copy_and_sum(skb, | |
645 | (unsigned char *)__va(bdp->cbd_bufaddr), | |
646 | pkt_len-4, 0); | |
647 | skb->protocol=eth_type_trans(skb,dev); | |
648 | netif_rx(skb); | |
649 | } | |
650 | rx_processing_done: | |
651 | ||
652 | /* Clear the status flags for this buffer. | |
653 | */ | |
654 | bdp->cbd_sc &= ~BD_ENET_RX_STATS; | |
655 | ||
656 | /* Mark the buffer empty. | |
657 | */ | |
658 | bdp->cbd_sc |= BD_ENET_RX_EMPTY; | |
659 | ||
660 | /* Update BD pointer to next entry. | |
661 | */ | |
662 | if (bdp->cbd_sc & BD_ENET_RX_WRAP) | |
663 | bdp = fep->rx_bd_base; | |
664 | else | |
665 | bdp++; | |
666 | ||
667 | #if 1 | |
668 | /* Doing this here will keep the FEC running while we process | |
669 | * incoming frames. On a heavily loaded network, we should be | |
670 | * able to keep up at the expense of system resources. | |
671 | */ | |
672 | fecp->fec_r_des_active = 0x01000000; | |
673 | #endif | |
674 | } /* while (!(bdp->cbd_sc & BD_ENET_RX_EMPTY)) */ | |
675 | fep->cur_rx = (cbd_t *)bdp; | |
676 | ||
677 | #if 0 | |
678 | /* Doing this here will allow us to process all frames in the | |
679 | * ring before the FEC is allowed to put more there. On a heavily | |
680 | * loaded network, some frames may be lost. Unfortunately, this | |
681 | * increases the interrupt overhead since we can potentially work | |
682 | * our way back to the interrupt return only to come right back | |
683 | * here. | |
684 | */ | |
685 | fecp->fec_r_des_active = 0x01000000; | |
686 | #endif | |
687 | } | |
688 | ||
689 | ||
690 | static void | |
691 | fec_enet_mii(struct net_device *dev) | |
692 | { | |
693 | struct fec_enet_private *fep; | |
694 | volatile fec_t *ep; | |
695 | mii_list_t *mip; | |
696 | uint mii_reg; | |
697 | ||
698 | fep = netdev_priv(dev); | |
699 | ep = fep->hwp; | |
700 | mii_reg = ep->fec_mii_data; | |
701 | ||
702 | if ((mip = mii_head) == NULL) { | |
703 | printk("MII and no head!\n"); | |
704 | return; | |
705 | } | |
706 | ||
707 | if (mip->mii_func != NULL) | |
708 | (*(mip->mii_func))(mii_reg, dev); | |
709 | ||
710 | mii_head = mip->mii_next; | |
711 | mip->mii_next = mii_free; | |
712 | mii_free = mip; | |
713 | ||
714 | if ((mip = mii_head) != NULL) | |
715 | ep->fec_mii_data = mip->mii_regval; | |
716 | } | |
717 | ||
718 | static int | |
719 | mii_queue(struct net_device *dev, int regval, void (*func)(uint, struct net_device *)) | |
720 | { | |
721 | struct fec_enet_private *fep; | |
722 | unsigned long flags; | |
723 | mii_list_t *mip; | |
724 | int retval; | |
725 | ||
726 | /* Add PHY address to register command. | |
727 | */ | |
728 | fep = netdev_priv(dev); | |
729 | regval |= fep->phy_addr << 23; | |
730 | ||
731 | retval = 0; | |
732 | ||
733 | save_flags(flags); | |
734 | cli(); | |
735 | ||
736 | if ((mip = mii_free) != NULL) { | |
737 | mii_free = mip->mii_next; | |
738 | mip->mii_regval = regval; | |
739 | mip->mii_func = func; | |
740 | mip->mii_next = NULL; | |
741 | if (mii_head) { | |
742 | mii_tail->mii_next = mip; | |
743 | mii_tail = mip; | |
744 | } | |
745 | else { | |
746 | mii_head = mii_tail = mip; | |
747 | fep->hwp->fec_mii_data = regval; | |
748 | } | |
749 | } | |
750 | else { | |
751 | retval = 1; | |
752 | } | |
753 | ||
754 | restore_flags(flags); | |
755 | ||
756 | return(retval); | |
757 | } | |
758 | ||
759 | static void mii_do_cmd(struct net_device *dev, const phy_cmd_t *c) | |
760 | { | |
761 | int k; | |
762 | ||
763 | if(!c) | |
764 | return; | |
765 | ||
766 | for(k = 0; (c+k)->mii_data != mk_mii_end; k++) { | |
767 | mii_queue(dev, (c+k)->mii_data, (c+k)->funct); | |
768 | } | |
769 | } | |
770 | ||
771 | static void mii_parse_sr(uint mii_reg, struct net_device *dev) | |
772 | { | |
773 | struct fec_enet_private *fep = netdev_priv(dev); | |
774 | volatile uint *s = &(fep->phy_status); | |
7dd6a2aa | 775 | uint status; |
1da177e4 | 776 | |
7dd6a2aa | 777 | status = *s & ~(PHY_STAT_LINK | PHY_STAT_FAULT | PHY_STAT_ANC); |
1da177e4 LT |
778 | |
779 | if (mii_reg & 0x0004) | |
7dd6a2aa | 780 | status |= PHY_STAT_LINK; |
1da177e4 | 781 | if (mii_reg & 0x0010) |
7dd6a2aa | 782 | status |= PHY_STAT_FAULT; |
1da177e4 | 783 | if (mii_reg & 0x0020) |
7dd6a2aa GU |
784 | status |= PHY_STAT_ANC; |
785 | ||
786 | *s = status; | |
1da177e4 LT |
787 | } |
788 | ||
789 | static void mii_parse_cr(uint mii_reg, struct net_device *dev) | |
790 | { | |
791 | struct fec_enet_private *fep = netdev_priv(dev); | |
792 | volatile uint *s = &(fep->phy_status); | |
7dd6a2aa | 793 | uint status; |
1da177e4 | 794 | |
7dd6a2aa | 795 | status = *s & ~(PHY_CONF_ANE | PHY_CONF_LOOP); |
1da177e4 LT |
796 | |
797 | if (mii_reg & 0x1000) | |
7dd6a2aa | 798 | status |= PHY_CONF_ANE; |
1da177e4 | 799 | if (mii_reg & 0x4000) |
7dd6a2aa GU |
800 | status |= PHY_CONF_LOOP; |
801 | *s = status; | |
1da177e4 LT |
802 | } |
803 | ||
804 | static void mii_parse_anar(uint mii_reg, struct net_device *dev) | |
805 | { | |
806 | struct fec_enet_private *fep = netdev_priv(dev); | |
807 | volatile uint *s = &(fep->phy_status); | |
7dd6a2aa | 808 | uint status; |
1da177e4 | 809 | |
7dd6a2aa | 810 | status = *s & ~(PHY_CONF_SPMASK); |
1da177e4 LT |
811 | |
812 | if (mii_reg & 0x0020) | |
7dd6a2aa | 813 | status |= PHY_CONF_10HDX; |
1da177e4 | 814 | if (mii_reg & 0x0040) |
7dd6a2aa | 815 | status |= PHY_CONF_10FDX; |
1da177e4 | 816 | if (mii_reg & 0x0080) |
7dd6a2aa | 817 | status |= PHY_CONF_100HDX; |
1da177e4 | 818 | if (mii_reg & 0x00100) |
7dd6a2aa GU |
819 | status |= PHY_CONF_100FDX; |
820 | *s = status; | |
1da177e4 LT |
821 | } |
822 | ||
823 | /* ------------------------------------------------------------------------- */ | |
824 | /* The Level one LXT970 is used by many boards */ | |
825 | ||
826 | #define MII_LXT970_MIRROR 16 /* Mirror register */ | |
827 | #define MII_LXT970_IER 17 /* Interrupt Enable Register */ | |
828 | #define MII_LXT970_ISR 18 /* Interrupt Status Register */ | |
829 | #define MII_LXT970_CONFIG 19 /* Configuration Register */ | |
830 | #define MII_LXT970_CSR 20 /* Chip Status Register */ | |
831 | ||
832 | static void mii_parse_lxt970_csr(uint mii_reg, struct net_device *dev) | |
833 | { | |
834 | struct fec_enet_private *fep = netdev_priv(dev); | |
835 | volatile uint *s = &(fep->phy_status); | |
7dd6a2aa | 836 | uint status; |
1da177e4 | 837 | |
7dd6a2aa | 838 | status = *s & ~(PHY_STAT_SPMASK); |
1da177e4 LT |
839 | if (mii_reg & 0x0800) { |
840 | if (mii_reg & 0x1000) | |
7dd6a2aa | 841 | status |= PHY_STAT_100FDX; |
1da177e4 | 842 | else |
7dd6a2aa | 843 | status |= PHY_STAT_100HDX; |
1da177e4 LT |
844 | } else { |
845 | if (mii_reg & 0x1000) | |
7dd6a2aa | 846 | status |= PHY_STAT_10FDX; |
1da177e4 | 847 | else |
7dd6a2aa | 848 | status |= PHY_STAT_10HDX; |
1da177e4 | 849 | } |
7dd6a2aa | 850 | *s = status; |
1da177e4 LT |
851 | } |
852 | ||
7dd6a2aa | 853 | static phy_cmd_t const phy_cmd_lxt970_config[] = { |
1da177e4 LT |
854 | { mk_mii_read(MII_REG_CR), mii_parse_cr }, |
855 | { mk_mii_read(MII_REG_ANAR), mii_parse_anar }, | |
856 | { mk_mii_end, } | |
7dd6a2aa GU |
857 | }; |
858 | static phy_cmd_t const phy_cmd_lxt970_startup[] = { /* enable interrupts */ | |
1da177e4 LT |
859 | { mk_mii_write(MII_LXT970_IER, 0x0002), NULL }, |
860 | { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */ | |
861 | { mk_mii_end, } | |
7dd6a2aa GU |
862 | }; |
863 | static phy_cmd_t const phy_cmd_lxt970_ack_int[] = { | |
1da177e4 LT |
864 | /* read SR and ISR to acknowledge */ |
865 | { mk_mii_read(MII_REG_SR), mii_parse_sr }, | |
866 | { mk_mii_read(MII_LXT970_ISR), NULL }, | |
867 | ||
868 | /* find out the current status */ | |
869 | { mk_mii_read(MII_LXT970_CSR), mii_parse_lxt970_csr }, | |
870 | { mk_mii_end, } | |
7dd6a2aa GU |
871 | }; |
872 | static phy_cmd_t const phy_cmd_lxt970_shutdown[] = { /* disable interrupts */ | |
1da177e4 LT |
873 | { mk_mii_write(MII_LXT970_IER, 0x0000), NULL }, |
874 | { mk_mii_end, } | |
7dd6a2aa GU |
875 | }; |
876 | static phy_info_t const phy_info_lxt970 = { | |
877 | .id = 0x07810000, | |
878 | .name = "LXT970", | |
879 | .config = phy_cmd_lxt970_config, | |
880 | .startup = phy_cmd_lxt970_startup, | |
881 | .ack_int = phy_cmd_lxt970_ack_int, | |
882 | .shutdown = phy_cmd_lxt970_shutdown | |
1da177e4 LT |
883 | }; |
884 | ||
885 | /* ------------------------------------------------------------------------- */ | |
886 | /* The Level one LXT971 is used on some of my custom boards */ | |
887 | ||
888 | /* register definitions for the 971 */ | |
889 | ||
890 | #define MII_LXT971_PCR 16 /* Port Control Register */ | |
891 | #define MII_LXT971_SR2 17 /* Status Register 2 */ | |
892 | #define MII_LXT971_IER 18 /* Interrupt Enable Register */ | |
893 | #define MII_LXT971_ISR 19 /* Interrupt Status Register */ | |
894 | #define MII_LXT971_LCR 20 /* LED Control Register */ | |
895 | #define MII_LXT971_TCR 30 /* Transmit Control Register */ | |
896 | ||
897 | /* | |
898 | * I had some nice ideas of running the MDIO faster... | |
899 | * The 971 should support 8MHz and I tried it, but things acted really | |
900 | * weird, so 2.5 MHz ought to be enough for anyone... | |
901 | */ | |
902 | ||
903 | static void mii_parse_lxt971_sr2(uint mii_reg, struct net_device *dev) | |
904 | { | |
905 | struct fec_enet_private *fep = netdev_priv(dev); | |
906 | volatile uint *s = &(fep->phy_status); | |
7dd6a2aa | 907 | uint status; |
1da177e4 | 908 | |
7dd6a2aa | 909 | status = *s & ~(PHY_STAT_SPMASK | PHY_STAT_LINK | PHY_STAT_ANC); |
1da177e4 LT |
910 | |
911 | if (mii_reg & 0x0400) { | |
912 | fep->link = 1; | |
7dd6a2aa | 913 | status |= PHY_STAT_LINK; |
1da177e4 LT |
914 | } else { |
915 | fep->link = 0; | |
916 | } | |
917 | if (mii_reg & 0x0080) | |
7dd6a2aa | 918 | status |= PHY_STAT_ANC; |
1da177e4 LT |
919 | if (mii_reg & 0x4000) { |
920 | if (mii_reg & 0x0200) | |
7dd6a2aa | 921 | status |= PHY_STAT_100FDX; |
1da177e4 | 922 | else |
7dd6a2aa | 923 | status |= PHY_STAT_100HDX; |
1da177e4 LT |
924 | } else { |
925 | if (mii_reg & 0x0200) | |
7dd6a2aa | 926 | status |= PHY_STAT_10FDX; |
1da177e4 | 927 | else |
7dd6a2aa | 928 | status |= PHY_STAT_10HDX; |
1da177e4 LT |
929 | } |
930 | if (mii_reg & 0x0008) | |
7dd6a2aa | 931 | status |= PHY_STAT_FAULT; |
1da177e4 | 932 | |
7dd6a2aa GU |
933 | *s = status; |
934 | } | |
1da177e4 | 935 | |
7dd6a2aa GU |
936 | static phy_cmd_t const phy_cmd_lxt971_config[] = { |
937 | /* limit to 10MBit because my prototype board | |
1da177e4 LT |
938 | * doesn't work with 100. */ |
939 | { mk_mii_read(MII_REG_CR), mii_parse_cr }, | |
940 | { mk_mii_read(MII_REG_ANAR), mii_parse_anar }, | |
941 | { mk_mii_read(MII_LXT971_SR2), mii_parse_lxt971_sr2 }, | |
942 | { mk_mii_end, } | |
7dd6a2aa GU |
943 | }; |
944 | static phy_cmd_t const phy_cmd_lxt971_startup[] = { /* enable interrupts */ | |
1da177e4 LT |
945 | { mk_mii_write(MII_LXT971_IER, 0x00f2), NULL }, |
946 | { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */ | |
947 | { mk_mii_write(MII_LXT971_LCR, 0xd422), NULL }, /* LED config */ | |
948 | /* Somehow does the 971 tell me that the link is down | |
949 | * the first read after power-up. | |
950 | * read here to get a valid value in ack_int */ | |
951 | { mk_mii_read(MII_REG_SR), mii_parse_sr }, | |
952 | { mk_mii_end, } | |
7dd6a2aa GU |
953 | }; |
954 | static phy_cmd_t const phy_cmd_lxt971_ack_int[] = { | |
955 | /* acknowledge the int before reading status ! */ | |
956 | { mk_mii_read(MII_LXT971_ISR), NULL }, | |
1da177e4 LT |
957 | /* find out the current status */ |
958 | { mk_mii_read(MII_REG_SR), mii_parse_sr }, | |
959 | { mk_mii_read(MII_LXT971_SR2), mii_parse_lxt971_sr2 }, | |
1da177e4 | 960 | { mk_mii_end, } |
7dd6a2aa GU |
961 | }; |
962 | static phy_cmd_t const phy_cmd_lxt971_shutdown[] = { /* disable interrupts */ | |
1da177e4 LT |
963 | { mk_mii_write(MII_LXT971_IER, 0x0000), NULL }, |
964 | { mk_mii_end, } | |
7dd6a2aa GU |
965 | }; |
966 | static phy_info_t const phy_info_lxt971 = { | |
967 | .id = 0x0001378e, | |
968 | .name = "LXT971", | |
969 | .config = phy_cmd_lxt971_config, | |
970 | .startup = phy_cmd_lxt971_startup, | |
971 | .ack_int = phy_cmd_lxt971_ack_int, | |
972 | .shutdown = phy_cmd_lxt971_shutdown | |
1da177e4 LT |
973 | }; |
974 | ||
975 | /* ------------------------------------------------------------------------- */ | |
976 | /* The Quality Semiconductor QS6612 is used on the RPX CLLF */ | |
977 | ||
978 | /* register definitions */ | |
979 | ||
980 | #define MII_QS6612_MCR 17 /* Mode Control Register */ | |
981 | #define MII_QS6612_FTR 27 /* Factory Test Register */ | |
982 | #define MII_QS6612_MCO 28 /* Misc. Control Register */ | |
983 | #define MII_QS6612_ISR 29 /* Interrupt Source Register */ | |
984 | #define MII_QS6612_IMR 30 /* Interrupt Mask Register */ | |
985 | #define MII_QS6612_PCR 31 /* 100BaseTx PHY Control Reg. */ | |
986 | ||
987 | static void mii_parse_qs6612_pcr(uint mii_reg, struct net_device *dev) | |
988 | { | |
989 | struct fec_enet_private *fep = netdev_priv(dev); | |
990 | volatile uint *s = &(fep->phy_status); | |
7dd6a2aa | 991 | uint status; |
1da177e4 | 992 | |
7dd6a2aa | 993 | status = *s & ~(PHY_STAT_SPMASK); |
1da177e4 LT |
994 | |
995 | switch((mii_reg >> 2) & 7) { | |
7dd6a2aa GU |
996 | case 1: status |= PHY_STAT_10HDX; break; |
997 | case 2: status |= PHY_STAT_100HDX; break; | |
998 | case 5: status |= PHY_STAT_10FDX; break; | |
999 | case 6: status |= PHY_STAT_100FDX; break; | |
1da177e4 LT |
1000 | } |
1001 | ||
7dd6a2aa GU |
1002 | *s = status; |
1003 | } | |
1004 | ||
1005 | static phy_cmd_t const phy_cmd_qs6612_config[] = { | |
1da177e4 LT |
1006 | /* The PHY powers up isolated on the RPX, |
1007 | * so send a command to allow operation. | |
1008 | */ | |
1009 | { mk_mii_write(MII_QS6612_PCR, 0x0dc0), NULL }, | |
1010 | ||
1011 | /* parse cr and anar to get some info */ | |
1012 | { mk_mii_read(MII_REG_CR), mii_parse_cr }, | |
1013 | { mk_mii_read(MII_REG_ANAR), mii_parse_anar }, | |
1014 | { mk_mii_end, } | |
7dd6a2aa GU |
1015 | }; |
1016 | static phy_cmd_t const phy_cmd_qs6612_startup[] = { /* enable interrupts */ | |
1da177e4 LT |
1017 | { mk_mii_write(MII_QS6612_IMR, 0x003a), NULL }, |
1018 | { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */ | |
1019 | { mk_mii_end, } | |
7dd6a2aa GU |
1020 | }; |
1021 | static phy_cmd_t const phy_cmd_qs6612_ack_int[] = { | |
1da177e4 LT |
1022 | /* we need to read ISR, SR and ANER to acknowledge */ |
1023 | { mk_mii_read(MII_QS6612_ISR), NULL }, | |
1024 | { mk_mii_read(MII_REG_SR), mii_parse_sr }, | |
1025 | { mk_mii_read(MII_REG_ANER), NULL }, | |
1026 | ||
1027 | /* read pcr to get info */ | |
1028 | { mk_mii_read(MII_QS6612_PCR), mii_parse_qs6612_pcr }, | |
1029 | { mk_mii_end, } | |
7dd6a2aa GU |
1030 | }; |
1031 | static phy_cmd_t const phy_cmd_qs6612_shutdown[] = { /* disable interrupts */ | |
1da177e4 LT |
1032 | { mk_mii_write(MII_QS6612_IMR, 0x0000), NULL }, |
1033 | { mk_mii_end, } | |
7dd6a2aa GU |
1034 | }; |
1035 | static phy_info_t const phy_info_qs6612 = { | |
1036 | .id = 0x00181440, | |
1037 | .name = "QS6612", | |
1038 | .config = phy_cmd_qs6612_config, | |
1039 | .startup = phy_cmd_qs6612_startup, | |
1040 | .ack_int = phy_cmd_qs6612_ack_int, | |
1041 | .shutdown = phy_cmd_qs6612_shutdown | |
1da177e4 LT |
1042 | }; |
1043 | ||
1044 | /* ------------------------------------------------------------------------- */ | |
1045 | /* AMD AM79C874 phy */ | |
1046 | ||
1047 | /* register definitions for the 874 */ | |
1048 | ||
1049 | #define MII_AM79C874_MFR 16 /* Miscellaneous Feature Register */ | |
1050 | #define MII_AM79C874_ICSR 17 /* Interrupt/Status Register */ | |
1051 | #define MII_AM79C874_DR 18 /* Diagnostic Register */ | |
1052 | #define MII_AM79C874_PMLR 19 /* Power and Loopback Register */ | |
1053 | #define MII_AM79C874_MCR 21 /* ModeControl Register */ | |
1054 | #define MII_AM79C874_DC 23 /* Disconnect Counter */ | |
1055 | #define MII_AM79C874_REC 24 /* Recieve Error Counter */ | |
1056 | ||
1057 | static void mii_parse_am79c874_dr(uint mii_reg, struct net_device *dev) | |
1058 | { | |
1059 | struct fec_enet_private *fep = netdev_priv(dev); | |
1060 | volatile uint *s = &(fep->phy_status); | |
7dd6a2aa | 1061 | uint status; |
1da177e4 | 1062 | |
7dd6a2aa | 1063 | status = *s & ~(PHY_STAT_SPMASK | PHY_STAT_ANC); |
1da177e4 LT |
1064 | |
1065 | if (mii_reg & 0x0080) | |
7dd6a2aa | 1066 | status |= PHY_STAT_ANC; |
1da177e4 | 1067 | if (mii_reg & 0x0400) |
7dd6a2aa | 1068 | status |= ((mii_reg & 0x0800) ? PHY_STAT_100FDX : PHY_STAT_100HDX); |
1da177e4 | 1069 | else |
7dd6a2aa GU |
1070 | status |= ((mii_reg & 0x0800) ? PHY_STAT_10FDX : PHY_STAT_10HDX); |
1071 | ||
1072 | *s = status; | |
1da177e4 LT |
1073 | } |
1074 | ||
7dd6a2aa | 1075 | static phy_cmd_t const phy_cmd_am79c874_config[] = { |
1da177e4 LT |
1076 | { mk_mii_read(MII_REG_CR), mii_parse_cr }, |
1077 | { mk_mii_read(MII_REG_ANAR), mii_parse_anar }, | |
1078 | { mk_mii_read(MII_AM79C874_DR), mii_parse_am79c874_dr }, | |
1079 | { mk_mii_end, } | |
7dd6a2aa GU |
1080 | }; |
1081 | static phy_cmd_t const phy_cmd_am79c874_startup[] = { /* enable interrupts */ | |
1da177e4 LT |
1082 | { mk_mii_write(MII_AM79C874_ICSR, 0xff00), NULL }, |
1083 | { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */ | |
1084 | { mk_mii_read(MII_REG_SR), mii_parse_sr }, | |
1085 | { mk_mii_end, } | |
7dd6a2aa GU |
1086 | }; |
1087 | static phy_cmd_t const phy_cmd_am79c874_ack_int[] = { | |
1da177e4 LT |
1088 | /* find out the current status */ |
1089 | { mk_mii_read(MII_REG_SR), mii_parse_sr }, | |
1090 | { mk_mii_read(MII_AM79C874_DR), mii_parse_am79c874_dr }, | |
1091 | /* we only need to read ISR to acknowledge */ | |
1092 | { mk_mii_read(MII_AM79C874_ICSR), NULL }, | |
1093 | { mk_mii_end, } | |
7dd6a2aa GU |
1094 | }; |
1095 | static phy_cmd_t const phy_cmd_am79c874_shutdown[] = { /* disable interrupts */ | |
1da177e4 LT |
1096 | { mk_mii_write(MII_AM79C874_ICSR, 0x0000), NULL }, |
1097 | { mk_mii_end, } | |
7dd6a2aa GU |
1098 | }; |
1099 | static phy_info_t const phy_info_am79c874 = { | |
1100 | .id = 0x00022561, | |
1101 | .name = "AM79C874", | |
1102 | .config = phy_cmd_am79c874_config, | |
1103 | .startup = phy_cmd_am79c874_startup, | |
1104 | .ack_int = phy_cmd_am79c874_ack_int, | |
1105 | .shutdown = phy_cmd_am79c874_shutdown | |
1da177e4 LT |
1106 | }; |
1107 | ||
7dd6a2aa | 1108 | |
1da177e4 LT |
1109 | /* ------------------------------------------------------------------------- */ |
1110 | /* Kendin KS8721BL phy */ | |
1111 | ||
1112 | /* register definitions for the 8721 */ | |
1113 | ||
1114 | #define MII_KS8721BL_RXERCR 21 | |
1115 | #define MII_KS8721BL_ICSR 22 | |
1116 | #define MII_KS8721BL_PHYCR 31 | |
1117 | ||
7dd6a2aa | 1118 | static phy_cmd_t const phy_cmd_ks8721bl_config[] = { |
1da177e4 LT |
1119 | { mk_mii_read(MII_REG_CR), mii_parse_cr }, |
1120 | { mk_mii_read(MII_REG_ANAR), mii_parse_anar }, | |
1121 | { mk_mii_end, } | |
7dd6a2aa GU |
1122 | }; |
1123 | static phy_cmd_t const phy_cmd_ks8721bl_startup[] = { /* enable interrupts */ | |
1da177e4 LT |
1124 | { mk_mii_write(MII_KS8721BL_ICSR, 0xff00), NULL }, |
1125 | { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */ | |
1126 | { mk_mii_read(MII_REG_SR), mii_parse_sr }, | |
1127 | { mk_mii_end, } | |
7dd6a2aa GU |
1128 | }; |
1129 | static phy_cmd_t const phy_cmd_ks8721bl_ack_int[] = { | |
1da177e4 LT |
1130 | /* find out the current status */ |
1131 | { mk_mii_read(MII_REG_SR), mii_parse_sr }, | |
1132 | /* we only need to read ISR to acknowledge */ | |
1133 | { mk_mii_read(MII_KS8721BL_ICSR), NULL }, | |
1134 | { mk_mii_end, } | |
7dd6a2aa GU |
1135 | }; |
1136 | static phy_cmd_t const phy_cmd_ks8721bl_shutdown[] = { /* disable interrupts */ | |
1da177e4 LT |
1137 | { mk_mii_write(MII_KS8721BL_ICSR, 0x0000), NULL }, |
1138 | { mk_mii_end, } | |
7dd6a2aa GU |
1139 | }; |
1140 | static phy_info_t const phy_info_ks8721bl = { | |
1141 | .id = 0x00022161, | |
1142 | .name = "KS8721BL", | |
1143 | .config = phy_cmd_ks8721bl_config, | |
1144 | .startup = phy_cmd_ks8721bl_startup, | |
1145 | .ack_int = phy_cmd_ks8721bl_ack_int, | |
1146 | .shutdown = phy_cmd_ks8721bl_shutdown | |
1da177e4 LT |
1147 | }; |
1148 | ||
562d2f8c GU |
1149 | /* ------------------------------------------------------------------------- */ |
1150 | /* register definitions for the DP83848 */ | |
1151 | ||
1152 | #define MII_DP8384X_PHYSTST 16 /* PHY Status Register */ | |
1153 | ||
1154 | static void mii_parse_dp8384x_sr2(uint mii_reg, struct net_device *dev) | |
1155 | { | |
1156 | struct fec_enet_private *fep = dev->priv; | |
1157 | volatile uint *s = &(fep->phy_status); | |
1158 | ||
1159 | *s &= ~(PHY_STAT_SPMASK | PHY_STAT_LINK | PHY_STAT_ANC); | |
1160 | ||
1161 | /* Link up */ | |
1162 | if (mii_reg & 0x0001) { | |
1163 | fep->link = 1; | |
1164 | *s |= PHY_STAT_LINK; | |
1165 | } else | |
1166 | fep->link = 0; | |
1167 | /* Status of link */ | |
1168 | if (mii_reg & 0x0010) /* Autonegotioation complete */ | |
1169 | *s |= PHY_STAT_ANC; | |
1170 | if (mii_reg & 0x0002) { /* 10MBps? */ | |
1171 | if (mii_reg & 0x0004) /* Full Duplex? */ | |
1172 | *s |= PHY_STAT_10FDX; | |
1173 | else | |
1174 | *s |= PHY_STAT_10HDX; | |
1175 | } else { /* 100 Mbps? */ | |
1176 | if (mii_reg & 0x0004) /* Full Duplex? */ | |
1177 | *s |= PHY_STAT_100FDX; | |
1178 | else | |
1179 | *s |= PHY_STAT_100HDX; | |
1180 | } | |
1181 | if (mii_reg & 0x0008) | |
1182 | *s |= PHY_STAT_FAULT; | |
1183 | } | |
1184 | ||
1185 | static phy_info_t phy_info_dp83848= { | |
1186 | 0x020005c9, | |
1187 | "DP83848", | |
1188 | ||
1189 | (const phy_cmd_t []) { /* config */ | |
1190 | { mk_mii_read(MII_REG_CR), mii_parse_cr }, | |
1191 | { mk_mii_read(MII_REG_ANAR), mii_parse_anar }, | |
1192 | { mk_mii_read(MII_DP8384X_PHYSTST), mii_parse_dp8384x_sr2 }, | |
1193 | { mk_mii_end, } | |
1194 | }, | |
1195 | (const phy_cmd_t []) { /* startup - enable interrupts */ | |
1196 | { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */ | |
1197 | { mk_mii_read(MII_REG_SR), mii_parse_sr }, | |
1198 | { mk_mii_end, } | |
1199 | }, | |
1200 | (const phy_cmd_t []) { /* ack_int - never happens, no interrupt */ | |
1201 | { mk_mii_end, } | |
1202 | }, | |
1203 | (const phy_cmd_t []) { /* shutdown */ | |
1204 | { mk_mii_end, } | |
1205 | }, | |
1206 | }; | |
1207 | ||
1da177e4 LT |
1208 | /* ------------------------------------------------------------------------- */ |
1209 | ||
7dd6a2aa | 1210 | static phy_info_t const * const phy_info[] = { |
1da177e4 LT |
1211 | &phy_info_lxt970, |
1212 | &phy_info_lxt971, | |
1213 | &phy_info_qs6612, | |
1214 | &phy_info_am79c874, | |
1215 | &phy_info_ks8721bl, | |
562d2f8c | 1216 | &phy_info_dp83848, |
1da177e4 LT |
1217 | NULL |
1218 | }; | |
1219 | ||
1220 | /* ------------------------------------------------------------------------- */ | |
6b265293 | 1221 | #if !defined(CONFIG_M532x) |
1da177e4 LT |
1222 | #ifdef CONFIG_RPXCLASSIC |
1223 | static void | |
1224 | mii_link_interrupt(void *dev_id); | |
1225 | #else | |
1226 | static irqreturn_t | |
1227 | mii_link_interrupt(int irq, void * dev_id, struct pt_regs * regs); | |
1228 | #endif | |
6b265293 | 1229 | #endif |
1da177e4 LT |
1230 | |
1231 | #if defined(CONFIG_M5272) | |
1232 | ||
1233 | /* | |
1234 | * Code specific to Coldfire 5272 setup. | |
1235 | */ | |
1236 | static void __inline__ fec_request_intrs(struct net_device *dev) | |
1237 | { | |
1238 | volatile unsigned long *icrp; | |
7dd6a2aa GU |
1239 | static const struct idesc { |
1240 | char *name; | |
1241 | unsigned short irq; | |
1242 | irqreturn_t (*handler)(int, void *, struct pt_regs *); | |
1243 | } *idp, id[] = { | |
1244 | { "fec(RX)", 86, fec_enet_interrupt }, | |
1245 | { "fec(TX)", 87, fec_enet_interrupt }, | |
1246 | { "fec(OTHER)", 88, fec_enet_interrupt }, | |
1247 | { "fec(MII)", 66, mii_link_interrupt }, | |
1248 | { NULL }, | |
1249 | }; | |
1da177e4 LT |
1250 | |
1251 | /* Setup interrupt handlers. */ | |
7dd6a2aa GU |
1252 | for (idp = id; idp->name; idp++) { |
1253 | if (request_irq(idp->irq, idp->handler, 0, idp->name, dev) != 0) | |
1254 | printk("FEC: Could not allocate %s IRQ(%d)!\n", idp->name, idp->irq); | |
1255 | } | |
1da177e4 LT |
1256 | |
1257 | /* Unmask interrupt at ColdFire 5272 SIM */ | |
1258 | icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR3); | |
1259 | *icrp = 0x00000ddd; | |
1260 | icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1); | |
1261 | *icrp = (*icrp & 0x70777777) | 0x0d000000; | |
1262 | } | |
1263 | ||
1264 | static void __inline__ fec_set_mii(struct net_device *dev, struct fec_enet_private *fep) | |
1265 | { | |
1266 | volatile fec_t *fecp; | |
1267 | ||
1268 | fecp = fep->hwp; | |
1269 | fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x04; | |
1270 | fecp->fec_x_cntrl = 0x00; | |
1271 | ||
1272 | /* | |
1273 | * Set MII speed to 2.5 MHz | |
1274 | * See 5272 manual section 11.5.8: MSCR | |
1275 | */ | |
1276 | fep->phy_speed = ((((MCF_CLK / 4) / (2500000 / 10)) + 5) / 10) * 2; | |
1277 | fecp->fec_mii_speed = fep->phy_speed; | |
1278 | ||
1279 | fec_restart(dev, 0); | |
1280 | } | |
1281 | ||
1282 | static void __inline__ fec_get_mac(struct net_device *dev) | |
1283 | { | |
1284 | struct fec_enet_private *fep = netdev_priv(dev); | |
1285 | volatile fec_t *fecp; | |
7dd6a2aa | 1286 | unsigned char *iap, tmpaddr[ETH_ALEN]; |
1da177e4 LT |
1287 | |
1288 | fecp = fep->hwp; | |
1289 | ||
7dd6a2aa | 1290 | if (FEC_FLASHMAC) { |
1da177e4 LT |
1291 | /* |
1292 | * Get MAC address from FLASH. | |
1293 | * If it is all 1's or 0's, use the default. | |
1294 | */ | |
7dd6a2aa | 1295 | iap = (unsigned char *)FEC_FLASHMAC; |
1da177e4 LT |
1296 | if ((iap[0] == 0) && (iap[1] == 0) && (iap[2] == 0) && |
1297 | (iap[3] == 0) && (iap[4] == 0) && (iap[5] == 0)) | |
1298 | iap = fec_mac_default; | |
1299 | if ((iap[0] == 0xff) && (iap[1] == 0xff) && (iap[2] == 0xff) && | |
1300 | (iap[3] == 0xff) && (iap[4] == 0xff) && (iap[5] == 0xff)) | |
1301 | iap = fec_mac_default; | |
1302 | } else { | |
1303 | *((unsigned long *) &tmpaddr[0]) = fecp->fec_addr_low; | |
1304 | *((unsigned short *) &tmpaddr[4]) = (fecp->fec_addr_high >> 16); | |
1305 | iap = &tmpaddr[0]; | |
1306 | } | |
1307 | ||
7dd6a2aa | 1308 | memcpy(dev->dev_addr, iap, ETH_ALEN); |
1da177e4 LT |
1309 | |
1310 | /* Adjust MAC if using default MAC address */ | |
7dd6a2aa GU |
1311 | if (iap == fec_mac_default) |
1312 | dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->index; | |
1da177e4 LT |
1313 | } |
1314 | ||
1315 | static void __inline__ fec_enable_phy_intr(void) | |
1316 | { | |
1317 | } | |
1318 | ||
1319 | static void __inline__ fec_disable_phy_intr(void) | |
1320 | { | |
1321 | volatile unsigned long *icrp; | |
1322 | icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1); | |
1323 | *icrp = (*icrp & 0x70777777) | 0x08000000; | |
1324 | } | |
1325 | ||
1326 | static void __inline__ fec_phy_ack_intr(void) | |
1327 | { | |
1328 | volatile unsigned long *icrp; | |
1329 | /* Acknowledge the interrupt */ | |
1330 | icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1); | |
1331 | *icrp = (*icrp & 0x77777777) | 0x08000000; | |
1332 | } | |
1333 | ||
1334 | static void __inline__ fec_localhw_setup(void) | |
1335 | { | |
1336 | } | |
1337 | ||
1338 | /* | |
1339 | * Do not need to make region uncached on 5272. | |
1340 | */ | |
1341 | static void __inline__ fec_uncache(unsigned long addr) | |
1342 | { | |
1343 | } | |
1344 | ||
1345 | /* ------------------------------------------------------------------------- */ | |
1346 | ||
7dd6a2aa | 1347 | #elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) |
1da177e4 LT |
1348 | |
1349 | /* | |
7dd6a2aa GU |
1350 | * Code specific to Coldfire 5230/5231/5232/5234/5235, |
1351 | * the 5270/5271/5274/5275 and 5280/5282 setups. | |
1da177e4 LT |
1352 | */ |
1353 | static void __inline__ fec_request_intrs(struct net_device *dev) | |
1354 | { | |
1355 | struct fec_enet_private *fep; | |
1356 | int b; | |
7dd6a2aa GU |
1357 | static const struct idesc { |
1358 | char *name; | |
1359 | unsigned short irq; | |
1360 | } *idp, id[] = { | |
1361 | { "fec(TXF)", 23 }, | |
1362 | { "fec(TXB)", 24 }, | |
1363 | { "fec(TXFIFO)", 25 }, | |
1364 | { "fec(TXCR)", 26 }, | |
1365 | { "fec(RXF)", 27 }, | |
1366 | { "fec(RXB)", 28 }, | |
1367 | { "fec(MII)", 29 }, | |
1368 | { "fec(LC)", 30 }, | |
1369 | { "fec(HBERR)", 31 }, | |
1370 | { "fec(GRA)", 32 }, | |
1371 | { "fec(EBERR)", 33 }, | |
1372 | { "fec(BABT)", 34 }, | |
1373 | { "fec(BABR)", 35 }, | |
1374 | { NULL }, | |
1375 | }; | |
1da177e4 LT |
1376 | |
1377 | fep = netdev_priv(dev); | |
1378 | b = (fep->index) ? 128 : 64; | |
1379 | ||
1380 | /* Setup interrupt handlers. */ | |
7dd6a2aa GU |
1381 | for (idp = id; idp->name; idp++) { |
1382 | if (request_irq(b+idp->irq, fec_enet_interrupt, 0, idp->name, dev) != 0) | |
1383 | printk("FEC: Could not allocate %s IRQ(%d)!\n", idp->name, b+idp->irq); | |
1384 | } | |
1da177e4 LT |
1385 | |
1386 | /* Unmask interrupts at ColdFire 5280/5282 interrupt controller */ | |
1387 | { | |
1388 | volatile unsigned char *icrp; | |
1389 | volatile unsigned long *imrp; | |
1390 | int i; | |
1391 | ||
1392 | b = (fep->index) ? MCFICM_INTC1 : MCFICM_INTC0; | |
1393 | icrp = (volatile unsigned char *) (MCF_IPSBAR + b + | |
1394 | MCFINTC_ICR0); | |
1395 | for (i = 23; (i < 36); i++) | |
1396 | icrp[i] = 0x23; | |
1397 | ||
1398 | imrp = (volatile unsigned long *) (MCF_IPSBAR + b + | |
1399 | MCFINTC_IMRH); | |
1400 | *imrp &= ~0x0000000f; | |
1401 | imrp = (volatile unsigned long *) (MCF_IPSBAR + b + | |
1402 | MCFINTC_IMRL); | |
1403 | *imrp &= ~0xff800001; | |
1404 | } | |
1405 | ||
1406 | #if defined(CONFIG_M528x) | |
1407 | /* Set up gpio outputs for MII lines */ | |
1408 | { | |
7dd6a2aa GU |
1409 | volatile u16 *gpio_paspar; |
1410 | volatile u8 *gpio_pehlpar; | |
1da177e4 | 1411 | |
7dd6a2aa GU |
1412 | gpio_paspar = (volatile u16 *) (MCF_IPSBAR + 0x100056); |
1413 | gpio_pehlpar = (volatile u16 *) (MCF_IPSBAR + 0x100058); | |
1414 | *gpio_paspar |= 0x0f00; | |
1415 | *gpio_pehlpar = 0xc0; | |
1da177e4 LT |
1416 | } |
1417 | #endif | |
1418 | } | |
1419 | ||
1420 | static void __inline__ fec_set_mii(struct net_device *dev, struct fec_enet_private *fep) | |
1421 | { | |
1422 | volatile fec_t *fecp; | |
1423 | ||
1424 | fecp = fep->hwp; | |
1425 | fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x04; | |
1426 | fecp->fec_x_cntrl = 0x00; | |
1427 | ||
1428 | /* | |
1429 | * Set MII speed to 2.5 MHz | |
1430 | * See 5282 manual section 17.5.4.7: MSCR | |
1431 | */ | |
1432 | fep->phy_speed = ((((MCF_CLK / 2) / (2500000 / 10)) + 5) / 10) * 2; | |
1433 | fecp->fec_mii_speed = fep->phy_speed; | |
1434 | ||
1435 | fec_restart(dev, 0); | |
1436 | } | |
1437 | ||
1438 | static void __inline__ fec_get_mac(struct net_device *dev) | |
1439 | { | |
1440 | struct fec_enet_private *fep = netdev_priv(dev); | |
1441 | volatile fec_t *fecp; | |
7dd6a2aa | 1442 | unsigned char *iap, tmpaddr[ETH_ALEN]; |
1da177e4 LT |
1443 | |
1444 | fecp = fep->hwp; | |
1445 | ||
7dd6a2aa | 1446 | if (FEC_FLASHMAC) { |
1da177e4 LT |
1447 | /* |
1448 | * Get MAC address from FLASH. | |
1449 | * If it is all 1's or 0's, use the default. | |
1450 | */ | |
7dd6a2aa | 1451 | iap = FEC_FLASHMAC; |
1da177e4 LT |
1452 | if ((iap[0] == 0) && (iap[1] == 0) && (iap[2] == 0) && |
1453 | (iap[3] == 0) && (iap[4] == 0) && (iap[5] == 0)) | |
1454 | iap = fec_mac_default; | |
1455 | if ((iap[0] == 0xff) && (iap[1] == 0xff) && (iap[2] == 0xff) && | |
1456 | (iap[3] == 0xff) && (iap[4] == 0xff) && (iap[5] == 0xff)) | |
1457 | iap = fec_mac_default; | |
1458 | } else { | |
1459 | *((unsigned long *) &tmpaddr[0]) = fecp->fec_addr_low; | |
1460 | *((unsigned short *) &tmpaddr[4]) = (fecp->fec_addr_high >> 16); | |
1461 | iap = &tmpaddr[0]; | |
1462 | } | |
1463 | ||
7dd6a2aa | 1464 | memcpy(dev->dev_addr, iap, ETH_ALEN); |
1da177e4 LT |
1465 | |
1466 | /* Adjust MAC if using default MAC address */ | |
7dd6a2aa GU |
1467 | if (iap == fec_mac_default) |
1468 | dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->index; | |
1da177e4 LT |
1469 | } |
1470 | ||
1471 | static void __inline__ fec_enable_phy_intr(void) | |
1472 | { | |
1473 | } | |
1474 | ||
1475 | static void __inline__ fec_disable_phy_intr(void) | |
1476 | { | |
1477 | } | |
1478 | ||
1479 | static void __inline__ fec_phy_ack_intr(void) | |
1480 | { | |
1481 | } | |
1482 | ||
1483 | static void __inline__ fec_localhw_setup(void) | |
1484 | { | |
1485 | } | |
1486 | ||
1487 | /* | |
1488 | * Do not need to make region uncached on 5272. | |
1489 | */ | |
1490 | static void __inline__ fec_uncache(unsigned long addr) | |
1491 | { | |
1492 | } | |
1493 | ||
1494 | /* ------------------------------------------------------------------------- */ | |
1495 | ||
562d2f8c GU |
1496 | #elif defined(CONFIG_M520x) |
1497 | ||
1498 | /* | |
1499 | * Code specific to Coldfire 520x | |
1500 | */ | |
1501 | static void __inline__ fec_request_intrs(struct net_device *dev) | |
1502 | { | |
1503 | struct fec_enet_private *fep; | |
1504 | int b; | |
1505 | static const struct idesc { | |
1506 | char *name; | |
1507 | unsigned short irq; | |
1508 | } *idp, id[] = { | |
1509 | { "fec(TXF)", 23 }, | |
1510 | { "fec(TXB)", 24 }, | |
1511 | { "fec(TXFIFO)", 25 }, | |
1512 | { "fec(TXCR)", 26 }, | |
1513 | { "fec(RXF)", 27 }, | |
1514 | { "fec(RXB)", 28 }, | |
1515 | { "fec(MII)", 29 }, | |
1516 | { "fec(LC)", 30 }, | |
1517 | { "fec(HBERR)", 31 }, | |
1518 | { "fec(GRA)", 32 }, | |
1519 | { "fec(EBERR)", 33 }, | |
1520 | { "fec(BABT)", 34 }, | |
1521 | { "fec(BABR)", 35 }, | |
1522 | { NULL }, | |
1523 | }; | |
1524 | ||
1525 | fep = netdev_priv(dev); | |
1526 | b = 64 + 13; | |
1527 | ||
1528 | /* Setup interrupt handlers. */ | |
1529 | for (idp = id; idp->name; idp++) { | |
1530 | if (request_irq(b+idp->irq,fec_enet_interrupt,0,idp->name,dev)!=0) | |
1531 | printk("FEC: Could not allocate %s IRQ(%d)!\n", idp->name, b+idp->irq); | |
1532 | } | |
1533 | ||
1534 | /* Unmask interrupts at ColdFire interrupt controller */ | |
1535 | { | |
1536 | volatile unsigned char *icrp; | |
1537 | volatile unsigned long *imrp; | |
1538 | ||
1539 | icrp = (volatile unsigned char *) (MCF_IPSBAR + MCFICM_INTC0 + | |
1540 | MCFINTC_ICR0); | |
1541 | for (b = 36; (b < 49); b++) | |
1542 | icrp[b] = 0x04; | |
1543 | imrp = (volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + | |
1544 | MCFINTC_IMRH); | |
1545 | *imrp &= ~0x0001FFF0; | |
1546 | } | |
1547 | *(volatile unsigned char *)(MCF_IPSBAR + MCF_GPIO_PAR_FEC) |= 0xf0; | |
1548 | *(volatile unsigned char *)(MCF_IPSBAR + MCF_GPIO_PAR_FECI2C) |= 0x0f; | |
1549 | } | |
1550 | ||
1551 | static void __inline__ fec_set_mii(struct net_device *dev, struct fec_enet_private *fep) | |
1552 | { | |
1553 | volatile fec_t *fecp; | |
1554 | ||
1555 | fecp = fep->hwp; | |
1556 | fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x04; | |
1557 | fecp->fec_x_cntrl = 0x00; | |
1558 | ||
1559 | /* | |
1560 | * Set MII speed to 2.5 MHz | |
1561 | * See 5282 manual section 17.5.4.7: MSCR | |
1562 | */ | |
1563 | fep->phy_speed = ((((MCF_CLK / 2) / (2500000 / 10)) + 5) / 10) * 2; | |
1564 | fecp->fec_mii_speed = fep->phy_speed; | |
1565 | ||
1566 | fec_restart(dev, 0); | |
1567 | } | |
1568 | ||
1569 | static void __inline__ fec_get_mac(struct net_device *dev) | |
1570 | { | |
1571 | struct fec_enet_private *fep = netdev_priv(dev); | |
1572 | volatile fec_t *fecp; | |
1573 | unsigned char *iap, tmpaddr[ETH_ALEN]; | |
1574 | ||
1575 | fecp = fep->hwp; | |
1576 | ||
1577 | if (FEC_FLASHMAC) { | |
1578 | /* | |
1579 | * Get MAC address from FLASH. | |
1580 | * If it is all 1's or 0's, use the default. | |
1581 | */ | |
1582 | iap = FEC_FLASHMAC; | |
1583 | if ((iap[0] == 0) && (iap[1] == 0) && (iap[2] == 0) && | |
1584 | (iap[3] == 0) && (iap[4] == 0) && (iap[5] == 0)) | |
1585 | iap = fec_mac_default; | |
1586 | if ((iap[0] == 0xff) && (iap[1] == 0xff) && (iap[2] == 0xff) && | |
1587 | (iap[3] == 0xff) && (iap[4] == 0xff) && (iap[5] == 0xff)) | |
1588 | iap = fec_mac_default; | |
1589 | } else { | |
1590 | *((unsigned long *) &tmpaddr[0]) = fecp->fec_addr_low; | |
1591 | *((unsigned short *) &tmpaddr[4]) = (fecp->fec_addr_high >> 16); | |
1592 | iap = &tmpaddr[0]; | |
1593 | } | |
1594 | ||
1595 | memcpy(dev->dev_addr, iap, ETH_ALEN); | |
1596 | ||
1597 | /* Adjust MAC if using default MAC address */ | |
1598 | if (iap == fec_mac_default) | |
1599 | dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->index; | |
1600 | } | |
1601 | ||
1602 | static void __inline__ fec_enable_phy_intr(void) | |
1603 | { | |
1604 | } | |
1605 | ||
1606 | static void __inline__ fec_disable_phy_intr(void) | |
1607 | { | |
1608 | } | |
1609 | ||
1610 | static void __inline__ fec_phy_ack_intr(void) | |
1611 | { | |
1612 | } | |
1613 | ||
1614 | static void __inline__ fec_localhw_setup(void) | |
1615 | { | |
1616 | } | |
1617 | ||
1618 | static void __inline__ fec_uncache(unsigned long addr) | |
1619 | { | |
1620 | } | |
1621 | ||
1622 | /* ------------------------------------------------------------------------- */ | |
1623 | ||
6b265293 MW |
1624 | #elif defined(CONFIG_M532x) |
1625 | /* | |
1626 | * Code specific for M532x | |
1627 | */ | |
1628 | static void __inline__ fec_request_intrs(struct net_device *dev) | |
1629 | { | |
1630 | struct fec_enet_private *fep; | |
1631 | int b; | |
1632 | static const struct idesc { | |
1633 | char *name; | |
1634 | unsigned short irq; | |
1635 | } *idp, id[] = { | |
1636 | { "fec(TXF)", 36 }, | |
1637 | { "fec(TXB)", 37 }, | |
1638 | { "fec(TXFIFO)", 38 }, | |
1639 | { "fec(TXCR)", 39 }, | |
1640 | { "fec(RXF)", 40 }, | |
1641 | { "fec(RXB)", 41 }, | |
1642 | { "fec(MII)", 42 }, | |
1643 | { "fec(LC)", 43 }, | |
1644 | { "fec(HBERR)", 44 }, | |
1645 | { "fec(GRA)", 45 }, | |
1646 | { "fec(EBERR)", 46 }, | |
1647 | { "fec(BABT)", 47 }, | |
1648 | { "fec(BABR)", 48 }, | |
1649 | { NULL }, | |
1650 | }; | |
1651 | ||
1652 | fep = netdev_priv(dev); | |
1653 | b = (fep->index) ? 128 : 64; | |
1654 | ||
1655 | /* Setup interrupt handlers. */ | |
1656 | for (idp = id; idp->name; idp++) { | |
1657 | if (request_irq(b+idp->irq,fec_enet_interrupt,0,idp->name,dev)!=0) | |
1658 | printk("FEC: Could not allocate %s IRQ(%d)!\n", | |
1659 | idp->name, b+idp->irq); | |
1660 | } | |
1661 | ||
1662 | /* Unmask interrupts */ | |
1663 | MCF_INTC0_ICR36 = 0x2; | |
1664 | MCF_INTC0_ICR37 = 0x2; | |
1665 | MCF_INTC0_ICR38 = 0x2; | |
1666 | MCF_INTC0_ICR39 = 0x2; | |
1667 | MCF_INTC0_ICR40 = 0x2; | |
1668 | MCF_INTC0_ICR41 = 0x2; | |
1669 | MCF_INTC0_ICR42 = 0x2; | |
1670 | MCF_INTC0_ICR43 = 0x2; | |
1671 | MCF_INTC0_ICR44 = 0x2; | |
1672 | MCF_INTC0_ICR45 = 0x2; | |
1673 | MCF_INTC0_ICR46 = 0x2; | |
1674 | MCF_INTC0_ICR47 = 0x2; | |
1675 | MCF_INTC0_ICR48 = 0x2; | |
1676 | ||
1677 | MCF_INTC0_IMRH &= ~( | |
1678 | MCF_INTC_IMRH_INT_MASK36 | | |
1679 | MCF_INTC_IMRH_INT_MASK37 | | |
1680 | MCF_INTC_IMRH_INT_MASK38 | | |
1681 | MCF_INTC_IMRH_INT_MASK39 | | |
1682 | MCF_INTC_IMRH_INT_MASK40 | | |
1683 | MCF_INTC_IMRH_INT_MASK41 | | |
1684 | MCF_INTC_IMRH_INT_MASK42 | | |
1685 | MCF_INTC_IMRH_INT_MASK43 | | |
1686 | MCF_INTC_IMRH_INT_MASK44 | | |
1687 | MCF_INTC_IMRH_INT_MASK45 | | |
1688 | MCF_INTC_IMRH_INT_MASK46 | | |
1689 | MCF_INTC_IMRH_INT_MASK47 | | |
1690 | MCF_INTC_IMRH_INT_MASK48 ); | |
1691 | ||
1692 | /* Set up gpio outputs for MII lines */ | |
1693 | MCF_GPIO_PAR_FECI2C |= (0 | | |
1694 | MCF_GPIO_PAR_FECI2C_PAR_MDC_EMDC | | |
1695 | MCF_GPIO_PAR_FECI2C_PAR_MDIO_EMDIO); | |
1696 | MCF_GPIO_PAR_FEC = (0 | | |
1697 | MCF_GPIO_PAR_FEC_PAR_FEC_7W_FEC | | |
1698 | MCF_GPIO_PAR_FEC_PAR_FEC_MII_FEC); | |
1699 | } | |
1700 | ||
1701 | static void __inline__ fec_set_mii(struct net_device *dev, struct fec_enet_private *fep) | |
1702 | { | |
1703 | volatile fec_t *fecp; | |
1704 | ||
1705 | fecp = fep->hwp; | |
1706 | fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x04; | |
1707 | fecp->fec_x_cntrl = 0x00; | |
1708 | ||
1709 | /* | |
1710 | * Set MII speed to 2.5 MHz | |
1711 | */ | |
1712 | fep->phy_speed = ((((MCF_CLK / 2) / (2500000 / 10)) + 5) / 10) * 2; | |
1713 | fecp->fec_mii_speed = fep->phy_speed; | |
1714 | ||
1715 | fec_restart(dev, 0); | |
1716 | } | |
1717 | ||
1718 | static void __inline__ fec_get_mac(struct net_device *dev) | |
1719 | { | |
1720 | struct fec_enet_private *fep = netdev_priv(dev); | |
1721 | volatile fec_t *fecp; | |
1722 | unsigned char *iap, tmpaddr[ETH_ALEN]; | |
1723 | ||
1724 | fecp = fep->hwp; | |
1725 | ||
1726 | if (FEC_FLASHMAC) { | |
1727 | /* | |
1728 | * Get MAC address from FLASH. | |
1729 | * If it is all 1's or 0's, use the default. | |
1730 | */ | |
1731 | iap = FEC_FLASHMAC; | |
1732 | if ((iap[0] == 0) && (iap[1] == 0) && (iap[2] == 0) && | |
1733 | (iap[3] == 0) && (iap[4] == 0) && (iap[5] == 0)) | |
1734 | iap = fec_mac_default; | |
1735 | if ((iap[0] == 0xff) && (iap[1] == 0xff) && (iap[2] == 0xff) && | |
1736 | (iap[3] == 0xff) && (iap[4] == 0xff) && (iap[5] == 0xff)) | |
1737 | iap = fec_mac_default; | |
1738 | } else { | |
1739 | *((unsigned long *) &tmpaddr[0]) = fecp->fec_addr_low; | |
1740 | *((unsigned short *) &tmpaddr[4]) = (fecp->fec_addr_high >> 16); | |
1741 | iap = &tmpaddr[0]; | |
1742 | } | |
1743 | ||
1744 | memcpy(dev->dev_addr, iap, ETH_ALEN); | |
1745 | ||
1746 | /* Adjust MAC if using default MAC address */ | |
1747 | if (iap == fec_mac_default) | |
1748 | dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->index; | |
1749 | } | |
1750 | ||
1751 | static void __inline__ fec_enable_phy_intr(void) | |
1752 | { | |
1753 | } | |
1754 | ||
1755 | static void __inline__ fec_disable_phy_intr(void) | |
1756 | { | |
1757 | } | |
1758 | ||
1759 | static void __inline__ fec_phy_ack_intr(void) | |
1760 | { | |
1761 | } | |
1762 | ||
1763 | static void __inline__ fec_localhw_setup(void) | |
1764 | { | |
1765 | } | |
1766 | ||
1767 | /* | |
1768 | * Do not need to make region uncached on 532x. | |
1769 | */ | |
1770 | static void __inline__ fec_uncache(unsigned long addr) | |
1771 | { | |
1772 | } | |
1773 | ||
1774 | /* ------------------------------------------------------------------------- */ | |
1775 | ||
1776 | ||
1da177e4 LT |
1777 | #else |
1778 | ||
1779 | /* | |
7dd6a2aa | 1780 | * Code specific to the MPC860T setup. |
1da177e4 LT |
1781 | */ |
1782 | static void __inline__ fec_request_intrs(struct net_device *dev) | |
1783 | { | |
1784 | volatile immap_t *immap; | |
1785 | ||
1786 | immap = (immap_t *)IMAP_ADDR; /* pointer to internal registers */ | |
1787 | ||
1788 | if (request_8xxirq(FEC_INTERRUPT, fec_enet_interrupt, 0, "fec", dev) != 0) | |
1789 | panic("Could not allocate FEC IRQ!"); | |
1790 | ||
1791 | #ifdef CONFIG_RPXCLASSIC | |
1792 | /* Make Port C, bit 15 an input that causes interrupts. | |
1793 | */ | |
1794 | immap->im_ioport.iop_pcpar &= ~0x0001; | |
1795 | immap->im_ioport.iop_pcdir &= ~0x0001; | |
1796 | immap->im_ioport.iop_pcso &= ~0x0001; | |
1797 | immap->im_ioport.iop_pcint |= 0x0001; | |
1798 | cpm_install_handler(CPMVEC_PIO_PC15, mii_link_interrupt, dev); | |
1799 | ||
1800 | /* Make LEDS reflect Link status. | |
1801 | */ | |
1802 | *((uint *) RPX_CSR_ADDR) &= ~BCSR2_FETHLEDMODE; | |
1803 | #endif | |
1804 | #ifdef CONFIG_FADS | |
1805 | if (request_8xxirq(SIU_IRQ2, mii_link_interrupt, 0, "mii", dev) != 0) | |
1806 | panic("Could not allocate MII IRQ!"); | |
1807 | #endif | |
1808 | } | |
1809 | ||
1810 | static void __inline__ fec_get_mac(struct net_device *dev) | |
1811 | { | |
1da177e4 | 1812 | bd_t *bd; |
1da177e4 | 1813 | |
1da177e4 | 1814 | bd = (bd_t *)__res; |
7dd6a2aa | 1815 | memcpy(dev->dev_addr, bd->bi_enetaddr, ETH_ALEN); |
1da177e4 LT |
1816 | |
1817 | #ifdef CONFIG_RPXCLASSIC | |
1818 | /* The Embedded Planet boards have only one MAC address in | |
1819 | * the EEPROM, but can have two Ethernet ports. For the | |
1820 | * FEC port, we create another address by setting one of | |
1821 | * the address bits above something that would have (up to | |
1822 | * now) been allocated. | |
1823 | */ | |
7dd6a2aa | 1824 | dev->dev_adrd[3] |= 0x80; |
1da177e4 | 1825 | #endif |
1da177e4 LT |
1826 | } |
1827 | ||
1828 | static void __inline__ fec_set_mii(struct net_device *dev, struct fec_enet_private *fep) | |
1829 | { | |
1830 | extern uint _get_IMMR(void); | |
1831 | volatile immap_t *immap; | |
1832 | volatile fec_t *fecp; | |
1833 | ||
1834 | fecp = fep->hwp; | |
1835 | immap = (immap_t *)IMAP_ADDR; /* pointer to internal registers */ | |
1836 | ||
1837 | /* Configure all of port D for MII. | |
1838 | */ | |
1839 | immap->im_ioport.iop_pdpar = 0x1fff; | |
1840 | ||
1841 | /* Bits moved from Rev. D onward. | |
1842 | */ | |
1843 | if ((_get_IMMR() & 0xffff) < 0x0501) | |
1844 | immap->im_ioport.iop_pddir = 0x1c58; /* Pre rev. D */ | |
1845 | else | |
1846 | immap->im_ioport.iop_pddir = 0x1fff; /* Rev. D and later */ | |
1847 | ||
1848 | /* Set MII speed to 2.5 MHz | |
1849 | */ | |
1850 | fecp->fec_mii_speed = fep->phy_speed = | |
1851 | ((bd->bi_busfreq * 1000000) / 2500000) & 0x7e; | |
1852 | } | |
1853 | ||
1854 | static void __inline__ fec_enable_phy_intr(void) | |
1855 | { | |
1856 | volatile fec_t *fecp; | |
1857 | ||
1858 | fecp = fep->hwp; | |
1859 | ||
1860 | /* Enable MII command finished interrupt | |
1861 | */ | |
1862 | fecp->fec_ivec = (FEC_INTERRUPT/2) << 29; | |
1863 | } | |
1864 | ||
1865 | static void __inline__ fec_disable_phy_intr(void) | |
1866 | { | |
1867 | } | |
1868 | ||
1869 | static void __inline__ fec_phy_ack_intr(void) | |
1870 | { | |
1871 | } | |
1872 | ||
1873 | static void __inline__ fec_localhw_setup(void) | |
1874 | { | |
1875 | volatile fec_t *fecp; | |
1876 | ||
1877 | fecp = fep->hwp; | |
1878 | fecp->fec_r_hash = PKT_MAXBUF_SIZE; | |
1879 | /* Enable big endian and don't care about SDMA FC. | |
1880 | */ | |
1881 | fecp->fec_fun_code = 0x78000000; | |
1882 | } | |
1883 | ||
1884 | static void __inline__ fec_uncache(unsigned long addr) | |
1885 | { | |
1886 | pte_t *pte; | |
1887 | pte = va_to_pte(mem_addr); | |
1888 | pte_val(*pte) |= _PAGE_NO_CACHE; | |
1889 | flush_tlb_page(init_mm.mmap, mem_addr); | |
1890 | } | |
1891 | ||
1892 | #endif | |
1893 | ||
1894 | /* ------------------------------------------------------------------------- */ | |
1895 | ||
1896 | static void mii_display_status(struct net_device *dev) | |
1897 | { | |
1898 | struct fec_enet_private *fep = netdev_priv(dev); | |
1899 | volatile uint *s = &(fep->phy_status); | |
1900 | ||
1901 | if (!fep->link && !fep->old_link) { | |
1902 | /* Link is still down - don't print anything */ | |
1903 | return; | |
1904 | } | |
1905 | ||
1906 | printk("%s: status: ", dev->name); | |
1907 | ||
1908 | if (!fep->link) { | |
1909 | printk("link down"); | |
1910 | } else { | |
1911 | printk("link up"); | |
1912 | ||
1913 | switch(*s & PHY_STAT_SPMASK) { | |
1914 | case PHY_STAT_100FDX: printk(", 100MBit Full Duplex"); break; | |
1915 | case PHY_STAT_100HDX: printk(", 100MBit Half Duplex"); break; | |
1916 | case PHY_STAT_10FDX: printk(", 10MBit Full Duplex"); break; | |
1917 | case PHY_STAT_10HDX: printk(", 10MBit Half Duplex"); break; | |
1918 | default: | |
1919 | printk(", Unknown speed/duplex"); | |
1920 | } | |
1921 | ||
1922 | if (*s & PHY_STAT_ANC) | |
1923 | printk(", auto-negotiation complete"); | |
1924 | } | |
1925 | ||
1926 | if (*s & PHY_STAT_FAULT) | |
1927 | printk(", remote fault"); | |
1928 | ||
1929 | printk(".\n"); | |
1930 | } | |
1931 | ||
1932 | static void mii_display_config(struct net_device *dev) | |
1933 | { | |
1934 | struct fec_enet_private *fep = netdev_priv(dev); | |
7dd6a2aa | 1935 | uint status = fep->phy_status; |
1da177e4 LT |
1936 | |
1937 | /* | |
1938 | ** When we get here, phy_task is already removed from | |
1939 | ** the workqueue. It is thus safe to allow to reuse it. | |
1940 | */ | |
1941 | fep->mii_phy_task_queued = 0; | |
1942 | printk("%s: config: auto-negotiation ", dev->name); | |
1943 | ||
7dd6a2aa | 1944 | if (status & PHY_CONF_ANE) |
1da177e4 LT |
1945 | printk("on"); |
1946 | else | |
1947 | printk("off"); | |
1948 | ||
7dd6a2aa | 1949 | if (status & PHY_CONF_100FDX) |
1da177e4 | 1950 | printk(", 100FDX"); |
7dd6a2aa | 1951 | if (status & PHY_CONF_100HDX) |
1da177e4 | 1952 | printk(", 100HDX"); |
7dd6a2aa | 1953 | if (status & PHY_CONF_10FDX) |
1da177e4 | 1954 | printk(", 10FDX"); |
7dd6a2aa | 1955 | if (status & PHY_CONF_10HDX) |
1da177e4 | 1956 | printk(", 10HDX"); |
7dd6a2aa | 1957 | if (!(status & PHY_CONF_SPMASK)) |
1da177e4 LT |
1958 | printk(", No speed/duplex selected?"); |
1959 | ||
7dd6a2aa | 1960 | if (status & PHY_CONF_LOOP) |
1da177e4 LT |
1961 | printk(", loopback enabled"); |
1962 | ||
1963 | printk(".\n"); | |
1964 | ||
1965 | fep->sequence_done = 1; | |
1966 | } | |
1967 | ||
1968 | static void mii_relink(struct net_device *dev) | |
1969 | { | |
1970 | struct fec_enet_private *fep = netdev_priv(dev); | |
1971 | int duplex; | |
1972 | ||
1973 | /* | |
1974 | ** When we get here, phy_task is already removed from | |
1975 | ** the workqueue. It is thus safe to allow to reuse it. | |
1976 | */ | |
1977 | fep->mii_phy_task_queued = 0; | |
1978 | fep->link = (fep->phy_status & PHY_STAT_LINK) ? 1 : 0; | |
1979 | mii_display_status(dev); | |
1980 | fep->old_link = fep->link; | |
1981 | ||
1982 | if (fep->link) { | |
1983 | duplex = 0; | |
1984 | if (fep->phy_status | |
1985 | & (PHY_STAT_100FDX | PHY_STAT_10FDX)) | |
1986 | duplex = 1; | |
1987 | fec_restart(dev, duplex); | |
1988 | } | |
1989 | else | |
1990 | fec_stop(dev); | |
1991 | ||
1992 | #if 0 | |
1993 | enable_irq(fep->mii_irq); | |
1994 | #endif | |
1995 | ||
1996 | } | |
1997 | ||
1998 | /* mii_queue_relink is called in interrupt context from mii_link_interrupt */ | |
1999 | static void mii_queue_relink(uint mii_reg, struct net_device *dev) | |
2000 | { | |
2001 | struct fec_enet_private *fep = netdev_priv(dev); | |
2002 | ||
2003 | /* | |
2004 | ** We cannot queue phy_task twice in the workqueue. It | |
2005 | ** would cause an endless loop in the workqueue. | |
2006 | ** Fortunately, if the last mii_relink entry has not yet been | |
2007 | ** executed now, it will do the job for the current interrupt, | |
2008 | ** which is just what we want. | |
2009 | */ | |
2010 | if (fep->mii_phy_task_queued) | |
2011 | return; | |
2012 | ||
2013 | fep->mii_phy_task_queued = 1; | |
2014 | INIT_WORK(&fep->phy_task, (void*)mii_relink, dev); | |
2015 | schedule_work(&fep->phy_task); | |
2016 | } | |
2017 | ||
7dd6a2aa | 2018 | /* mii_queue_config is called in interrupt context from fec_enet_mii */ |
1da177e4 LT |
2019 | static void mii_queue_config(uint mii_reg, struct net_device *dev) |
2020 | { | |
2021 | struct fec_enet_private *fep = netdev_priv(dev); | |
2022 | ||
2023 | if (fep->mii_phy_task_queued) | |
2024 | return; | |
2025 | ||
2026 | fep->mii_phy_task_queued = 1; | |
2027 | INIT_WORK(&fep->phy_task, (void*)mii_display_config, dev); | |
2028 | schedule_work(&fep->phy_task); | |
2029 | } | |
2030 | ||
7dd6a2aa GU |
2031 | phy_cmd_t const phy_cmd_relink[] = { |
2032 | { mk_mii_read(MII_REG_CR), mii_queue_relink }, | |
2033 | { mk_mii_end, } | |
2034 | }; | |
2035 | phy_cmd_t const phy_cmd_config[] = { | |
2036 | { mk_mii_read(MII_REG_CR), mii_queue_config }, | |
2037 | { mk_mii_end, } | |
2038 | }; | |
1da177e4 LT |
2039 | |
2040 | /* Read remainder of PHY ID. | |
2041 | */ | |
2042 | static void | |
2043 | mii_discover_phy3(uint mii_reg, struct net_device *dev) | |
2044 | { | |
2045 | struct fec_enet_private *fep; | |
2046 | int i; | |
2047 | ||
2048 | fep = netdev_priv(dev); | |
2049 | fep->phy_id |= (mii_reg & 0xffff); | |
2050 | printk("fec: PHY @ 0x%x, ID 0x%08x", fep->phy_addr, fep->phy_id); | |
2051 | ||
2052 | for(i = 0; phy_info[i]; i++) { | |
2053 | if(phy_info[i]->id == (fep->phy_id >> 4)) | |
2054 | break; | |
2055 | } | |
2056 | ||
2057 | if (phy_info[i]) | |
2058 | printk(" -- %s\n", phy_info[i]->name); | |
2059 | else | |
2060 | printk(" -- unknown PHY!\n"); | |
2061 | ||
2062 | fep->phy = phy_info[i]; | |
2063 | fep->phy_id_done = 1; | |
2064 | } | |
2065 | ||
2066 | /* Scan all of the MII PHY addresses looking for someone to respond | |
2067 | * with a valid ID. This usually happens quickly. | |
2068 | */ | |
2069 | static void | |
2070 | mii_discover_phy(uint mii_reg, struct net_device *dev) | |
2071 | { | |
2072 | struct fec_enet_private *fep; | |
2073 | volatile fec_t *fecp; | |
2074 | uint phytype; | |
2075 | ||
2076 | fep = netdev_priv(dev); | |
2077 | fecp = fep->hwp; | |
2078 | ||
2079 | if (fep->phy_addr < 32) { | |
2080 | if ((phytype = (mii_reg & 0xffff)) != 0xffff && phytype != 0) { | |
2081 | ||
2082 | /* Got first part of ID, now get remainder. | |
2083 | */ | |
2084 | fep->phy_id = phytype << 16; | |
2085 | mii_queue(dev, mk_mii_read(MII_REG_PHYIR2), | |
2086 | mii_discover_phy3); | |
2087 | } | |
2088 | else { | |
2089 | fep->phy_addr++; | |
2090 | mii_queue(dev, mk_mii_read(MII_REG_PHYIR1), | |
2091 | mii_discover_phy); | |
2092 | } | |
2093 | } else { | |
2094 | printk("FEC: No PHY device found.\n"); | |
2095 | /* Disable external MII interface */ | |
2096 | fecp->fec_mii_speed = fep->phy_speed = 0; | |
2097 | fec_disable_phy_intr(); | |
2098 | } | |
2099 | } | |
2100 | ||
2101 | /* This interrupt occurs when the PHY detects a link change. | |
2102 | */ | |
2103 | #ifdef CONFIG_RPXCLASSIC | |
2104 | static void | |
2105 | mii_link_interrupt(void *dev_id) | |
2106 | #else | |
2107 | static irqreturn_t | |
2108 | mii_link_interrupt(int irq, void * dev_id, struct pt_regs * regs) | |
2109 | #endif | |
2110 | { | |
2111 | struct net_device *dev = dev_id; | |
2112 | struct fec_enet_private *fep = netdev_priv(dev); | |
2113 | ||
2114 | fec_phy_ack_intr(); | |
2115 | ||
2116 | #if 0 | |
2117 | disable_irq(fep->mii_irq); /* disable now, enable later */ | |
2118 | #endif | |
2119 | ||
2120 | mii_do_cmd(dev, fep->phy->ack_int); | |
2121 | mii_do_cmd(dev, phy_cmd_relink); /* restart and display status */ | |
2122 | ||
2123 | return IRQ_HANDLED; | |
2124 | } | |
2125 | ||
2126 | static int | |
2127 | fec_enet_open(struct net_device *dev) | |
2128 | { | |
2129 | struct fec_enet_private *fep = netdev_priv(dev); | |
2130 | ||
2131 | /* I should reset the ring buffers here, but I don't yet know | |
2132 | * a simple way to do that. | |
2133 | */ | |
2134 | fec_set_mac_address(dev); | |
2135 | ||
2136 | fep->sequence_done = 0; | |
2137 | fep->link = 0; | |
2138 | ||
2139 | if (fep->phy) { | |
2140 | mii_do_cmd(dev, fep->phy->ack_int); | |
2141 | mii_do_cmd(dev, fep->phy->config); | |
2142 | mii_do_cmd(dev, phy_cmd_config); /* display configuration */ | |
2143 | ||
6b265293 MW |
2144 | /* Poll until the PHY tells us its configuration |
2145 | * (not link state). | |
2146 | * Request is initiated by mii_do_cmd above, but answer | |
2147 | * comes by interrupt. | |
2148 | * This should take about 25 usec per register at 2.5 MHz, | |
2149 | * and we read approximately 5 registers. | |
1da177e4 LT |
2150 | */ |
2151 | while(!fep->sequence_done) | |
2152 | schedule(); | |
2153 | ||
2154 | mii_do_cmd(dev, fep->phy->startup); | |
2155 | ||
2156 | /* Set the initial link state to true. A lot of hardware | |
2157 | * based on this device does not implement a PHY interrupt, | |
2158 | * so we are never notified of link change. | |
2159 | */ | |
2160 | fep->link = 1; | |
2161 | } else { | |
2162 | fep->link = 1; /* lets just try it and see */ | |
2163 | /* no phy, go full duplex, it's most likely a hub chip */ | |
2164 | fec_restart(dev, 1); | |
2165 | } | |
2166 | ||
2167 | netif_start_queue(dev); | |
2168 | fep->opened = 1; | |
2169 | return 0; /* Success */ | |
2170 | } | |
2171 | ||
2172 | static int | |
2173 | fec_enet_close(struct net_device *dev) | |
2174 | { | |
2175 | struct fec_enet_private *fep = netdev_priv(dev); | |
2176 | ||
2177 | /* Don't know what to do yet. | |
2178 | */ | |
2179 | fep->opened = 0; | |
2180 | netif_stop_queue(dev); | |
2181 | fec_stop(dev); | |
2182 | ||
2183 | return 0; | |
2184 | } | |
2185 | ||
2186 | static struct net_device_stats *fec_enet_get_stats(struct net_device *dev) | |
2187 | { | |
2188 | struct fec_enet_private *fep = netdev_priv(dev); | |
2189 | ||
2190 | return &fep->stats; | |
2191 | } | |
2192 | ||
2193 | /* Set or clear the multicast filter for this adaptor. | |
2194 | * Skeleton taken from sunlance driver. | |
2195 | * The CPM Ethernet implementation allows Multicast as well as individual | |
2196 | * MAC address filtering. Some of the drivers check to make sure it is | |
2197 | * a group multicast address, and discard those that are not. I guess I | |
2198 | * will do the same for now, but just remove the test if you want | |
2199 | * individual filtering as well (do the upper net layers want or support | |
2200 | * this kind of feature?). | |
2201 | */ | |
2202 | ||
2203 | #define HASH_BITS 6 /* #bits in hash */ | |
2204 | #define CRC32_POLY 0xEDB88320 | |
2205 | ||
2206 | static void set_multicast_list(struct net_device *dev) | |
2207 | { | |
2208 | struct fec_enet_private *fep; | |
2209 | volatile fec_t *ep; | |
2210 | struct dev_mc_list *dmi; | |
2211 | unsigned int i, j, bit, data, crc; | |
2212 | unsigned char hash; | |
2213 | ||
2214 | fep = netdev_priv(dev); | |
2215 | ep = fep->hwp; | |
2216 | ||
2217 | if (dev->flags&IFF_PROMISC) { | |
2218 | /* Log any net taps. */ | |
2219 | printk("%s: Promiscuous mode enabled.\n", dev->name); | |
2220 | ep->fec_r_cntrl |= 0x0008; | |
2221 | } else { | |
2222 | ||
2223 | ep->fec_r_cntrl &= ~0x0008; | |
2224 | ||
2225 | if (dev->flags & IFF_ALLMULTI) { | |
2226 | /* Catch all multicast addresses, so set the | |
2227 | * filter to all 1's. | |
2228 | */ | |
2229 | ep->fec_hash_table_high = 0xffffffff; | |
2230 | ep->fec_hash_table_low = 0xffffffff; | |
2231 | } else { | |
2232 | /* Clear filter and add the addresses in hash register. | |
2233 | */ | |
2234 | ep->fec_hash_table_high = 0; | |
2235 | ep->fec_hash_table_low = 0; | |
2236 | ||
2237 | dmi = dev->mc_list; | |
2238 | ||
2239 | for (j = 0; j < dev->mc_count; j++, dmi = dmi->next) | |
2240 | { | |
2241 | /* Only support group multicast for now. | |
2242 | */ | |
2243 | if (!(dmi->dmi_addr[0] & 1)) | |
2244 | continue; | |
2245 | ||
2246 | /* calculate crc32 value of mac address | |
2247 | */ | |
2248 | crc = 0xffffffff; | |
2249 | ||
2250 | for (i = 0; i < dmi->dmi_addrlen; i++) | |
2251 | { | |
2252 | data = dmi->dmi_addr[i]; | |
2253 | for (bit = 0; bit < 8; bit++, data >>= 1) | |
2254 | { | |
2255 | crc = (crc >> 1) ^ | |
2256 | (((crc ^ data) & 1) ? CRC32_POLY : 0); | |
2257 | } | |
2258 | } | |
2259 | ||
2260 | /* only upper 6 bits (HASH_BITS) are used | |
2261 | which point to specific bit in he hash registers | |
2262 | */ | |
2263 | hash = (crc >> (32 - HASH_BITS)) & 0x3f; | |
2264 | ||
2265 | if (hash > 31) | |
2266 | ep->fec_hash_table_high |= 1 << (hash - 32); | |
2267 | else | |
2268 | ep->fec_hash_table_low |= 1 << hash; | |
2269 | } | |
2270 | } | |
2271 | } | |
2272 | } | |
2273 | ||
2274 | /* Set a MAC change in hardware. | |
2275 | */ | |
2276 | static void | |
2277 | fec_set_mac_address(struct net_device *dev) | |
2278 | { | |
1da177e4 LT |
2279 | volatile fec_t *fecp; |
2280 | ||
7dd6a2aa | 2281 | fecp = ((struct fec_enet_private *)netdev_priv(dev))->hwp; |
1da177e4 LT |
2282 | |
2283 | /* Set station address. */ | |
7dd6a2aa GU |
2284 | fecp->fec_addr_low = dev->dev_addr[3] | (dev->dev_addr[2] << 8) | |
2285 | (dev->dev_addr[1] << 16) | (dev->dev_addr[0] << 24); | |
2286 | fecp->fec_addr_high = (dev->dev_addr[5] << 16) | | |
2287 | (dev->dev_addr[4] << 24); | |
1da177e4 LT |
2288 | |
2289 | } | |
2290 | ||
2291 | /* Initialize the FEC Ethernet on 860T (or ColdFire 5272). | |
2292 | */ | |
2293 | /* | |
2294 | * XXX: We need to clean up on failure exits here. | |
2295 | */ | |
2296 | int __init fec_enet_init(struct net_device *dev) | |
2297 | { | |
2298 | struct fec_enet_private *fep = netdev_priv(dev); | |
2299 | unsigned long mem_addr; | |
2300 | volatile cbd_t *bdp; | |
2301 | cbd_t *cbd_base; | |
2302 | volatile fec_t *fecp; | |
2303 | int i, j; | |
2304 | static int index = 0; | |
2305 | ||
2306 | /* Only allow us to be probed once. */ | |
2307 | if (index >= FEC_MAX_PORTS) | |
2308 | return -ENXIO; | |
2309 | ||
562d2f8c GU |
2310 | /* Allocate memory for buffer descriptors. |
2311 | */ | |
2312 | mem_addr = __get_free_page(GFP_KERNEL); | |
2313 | if (mem_addr == 0) { | |
2314 | printk("FEC: allocate descriptor memory failed?\n"); | |
2315 | return -ENOMEM; | |
2316 | } | |
2317 | ||
1da177e4 LT |
2318 | /* Create an Ethernet device instance. |
2319 | */ | |
2320 | fecp = (volatile fec_t *) fec_hw[index]; | |
2321 | ||
2322 | fep->index = index; | |
2323 | fep->hwp = fecp; | |
2324 | ||
2325 | /* Whack a reset. We should wait for this. | |
2326 | */ | |
2327 | fecp->fec_ecntrl = 1; | |
2328 | udelay(10); | |
2329 | ||
1da177e4 LT |
2330 | /* Set the Ethernet address. If using multiple Enets on the 8xx, |
2331 | * this needs some work to get unique addresses. | |
2332 | * | |
2333 | * This is our default MAC address unless the user changes | |
2334 | * it via eth_mac_addr (our dev->set_mac_addr handler). | |
2335 | */ | |
2336 | fec_get_mac(dev); | |
2337 | ||
1da177e4 LT |
2338 | cbd_base = (cbd_t *)mem_addr; |
2339 | /* XXX: missing check for allocation failure */ | |
2340 | ||
2341 | fec_uncache(mem_addr); | |
2342 | ||
2343 | /* Set receive and transmit descriptor base. | |
2344 | */ | |
2345 | fep->rx_bd_base = cbd_base; | |
2346 | fep->tx_bd_base = cbd_base + RX_RING_SIZE; | |
2347 | ||
2348 | fep->dirty_tx = fep->cur_tx = fep->tx_bd_base; | |
2349 | fep->cur_rx = fep->rx_bd_base; | |
2350 | ||
2351 | fep->skb_cur = fep->skb_dirty = 0; | |
2352 | ||
2353 | /* Initialize the receive buffer descriptors. | |
2354 | */ | |
2355 | bdp = fep->rx_bd_base; | |
2356 | for (i=0; i<FEC_ENET_RX_PAGES; i++) { | |
2357 | ||
2358 | /* Allocate a page. | |
2359 | */ | |
2360 | mem_addr = __get_free_page(GFP_KERNEL); | |
2361 | /* XXX: missing check for allocation failure */ | |
2362 | ||
2363 | fec_uncache(mem_addr); | |
2364 | ||
2365 | /* Initialize the BD for every fragment in the page. | |
2366 | */ | |
2367 | for (j=0; j<FEC_ENET_RX_FRPPG; j++) { | |
2368 | bdp->cbd_sc = BD_ENET_RX_EMPTY; | |
2369 | bdp->cbd_bufaddr = __pa(mem_addr); | |
2370 | mem_addr += FEC_ENET_RX_FRSIZE; | |
2371 | bdp++; | |
2372 | } | |
2373 | } | |
2374 | ||
2375 | /* Set the last buffer to wrap. | |
2376 | */ | |
2377 | bdp--; | |
2378 | bdp->cbd_sc |= BD_SC_WRAP; | |
2379 | ||
2380 | /* ...and the same for transmmit. | |
2381 | */ | |
2382 | bdp = fep->tx_bd_base; | |
2383 | for (i=0, j=FEC_ENET_TX_FRPPG; i<TX_RING_SIZE; i++) { | |
2384 | if (j >= FEC_ENET_TX_FRPPG) { | |
2385 | mem_addr = __get_free_page(GFP_KERNEL); | |
2386 | j = 1; | |
2387 | } else { | |
2388 | mem_addr += FEC_ENET_TX_FRSIZE; | |
2389 | j++; | |
2390 | } | |
2391 | fep->tx_bounce[i] = (unsigned char *) mem_addr; | |
2392 | ||
2393 | /* Initialize the BD for every fragment in the page. | |
2394 | */ | |
2395 | bdp->cbd_sc = 0; | |
2396 | bdp->cbd_bufaddr = 0; | |
2397 | bdp++; | |
2398 | } | |
2399 | ||
2400 | /* Set the last buffer to wrap. | |
2401 | */ | |
2402 | bdp--; | |
2403 | bdp->cbd_sc |= BD_SC_WRAP; | |
2404 | ||
2405 | /* Set receive and transmit descriptor base. | |
2406 | */ | |
2407 | fecp->fec_r_des_start = __pa((uint)(fep->rx_bd_base)); | |
2408 | fecp->fec_x_des_start = __pa((uint)(fep->tx_bd_base)); | |
2409 | ||
2410 | /* Install our interrupt handlers. This varies depending on | |
2411 | * the architecture. | |
2412 | */ | |
2413 | fec_request_intrs(dev); | |
2414 | ||
562d2f8c GU |
2415 | fecp->fec_hash_table_high = 0; |
2416 | fecp->fec_hash_table_low = 0; | |
2417 | fecp->fec_r_buff_size = PKT_MAXBLR_SIZE; | |
2418 | fecp->fec_ecntrl = 2; | |
6b265293 | 2419 | fecp->fec_r_des_active = 0; |
562d2f8c | 2420 | |
1da177e4 LT |
2421 | dev->base_addr = (unsigned long)fecp; |
2422 | ||
2423 | /* The FEC Ethernet specific entries in the device structure. */ | |
2424 | dev->open = fec_enet_open; | |
2425 | dev->hard_start_xmit = fec_enet_start_xmit; | |
2426 | dev->tx_timeout = fec_timeout; | |
2427 | dev->watchdog_timeo = TX_TIMEOUT; | |
2428 | dev->stop = fec_enet_close; | |
2429 | dev->get_stats = fec_enet_get_stats; | |
2430 | dev->set_multicast_list = set_multicast_list; | |
2431 | ||
2432 | for (i=0; i<NMII-1; i++) | |
2433 | mii_cmds[i].mii_next = &mii_cmds[i+1]; | |
2434 | mii_free = mii_cmds; | |
2435 | ||
2436 | /* setup MII interface */ | |
2437 | fec_set_mii(dev, fep); | |
2438 | ||
6b265293 MW |
2439 | /* Clear and enable interrupts */ |
2440 | fecp->fec_ievent = 0xffc00000; | |
2441 | fecp->fec_imask = (FEC_ENET_TXF | FEC_ENET_TXB | | |
2442 | FEC_ENET_RXF | FEC_ENET_RXB | FEC_ENET_MII); | |
2443 | ||
1da177e4 LT |
2444 | /* Queue up command to detect the PHY and initialize the |
2445 | * remainder of the interface. | |
2446 | */ | |
2447 | fep->phy_id_done = 0; | |
2448 | fep->phy_addr = 0; | |
2449 | mii_queue(dev, mk_mii_read(MII_REG_PHYIR1), mii_discover_phy); | |
2450 | ||
2451 | index++; | |
2452 | return 0; | |
2453 | } | |
2454 | ||
2455 | /* This function is called to start or restart the FEC during a link | |
2456 | * change. This only happens when switching between half and full | |
2457 | * duplex. | |
2458 | */ | |
2459 | static void | |
2460 | fec_restart(struct net_device *dev, int duplex) | |
2461 | { | |
2462 | struct fec_enet_private *fep; | |
2463 | volatile cbd_t *bdp; | |
2464 | volatile fec_t *fecp; | |
2465 | int i; | |
2466 | ||
2467 | fep = netdev_priv(dev); | |
2468 | fecp = fep->hwp; | |
2469 | ||
2470 | /* Whack a reset. We should wait for this. | |
2471 | */ | |
2472 | fecp->fec_ecntrl = 1; | |
2473 | udelay(10); | |
2474 | ||
1da177e4 LT |
2475 | /* Clear any outstanding interrupt. |
2476 | */ | |
7dd6a2aa | 2477 | fecp->fec_ievent = 0xffc00000; |
1da177e4 LT |
2478 | fec_enable_phy_intr(); |
2479 | ||
2480 | /* Set station address. | |
2481 | */ | |
7dd6a2aa | 2482 | fec_set_mac_address(dev); |
1da177e4 LT |
2483 | |
2484 | /* Reset all multicast. | |
2485 | */ | |
2486 | fecp->fec_hash_table_high = 0; | |
2487 | fecp->fec_hash_table_low = 0; | |
2488 | ||
2489 | /* Set maximum receive buffer size. | |
2490 | */ | |
2491 | fecp->fec_r_buff_size = PKT_MAXBLR_SIZE; | |
2492 | ||
2493 | fec_localhw_setup(); | |
2494 | ||
2495 | /* Set receive and transmit descriptor base. | |
2496 | */ | |
2497 | fecp->fec_r_des_start = __pa((uint)(fep->rx_bd_base)); | |
2498 | fecp->fec_x_des_start = __pa((uint)(fep->tx_bd_base)); | |
2499 | ||
2500 | fep->dirty_tx = fep->cur_tx = fep->tx_bd_base; | |
2501 | fep->cur_rx = fep->rx_bd_base; | |
2502 | ||
2503 | /* Reset SKB transmit buffers. | |
2504 | */ | |
2505 | fep->skb_cur = fep->skb_dirty = 0; | |
2506 | for (i=0; i<=TX_RING_MOD_MASK; i++) { | |
2507 | if (fep->tx_skbuff[i] != NULL) { | |
2508 | dev_kfree_skb_any(fep->tx_skbuff[i]); | |
2509 | fep->tx_skbuff[i] = NULL; | |
2510 | } | |
2511 | } | |
2512 | ||
2513 | /* Initialize the receive buffer descriptors. | |
2514 | */ | |
2515 | bdp = fep->rx_bd_base; | |
2516 | for (i=0; i<RX_RING_SIZE; i++) { | |
2517 | ||
2518 | /* Initialize the BD for every fragment in the page. | |
2519 | */ | |
2520 | bdp->cbd_sc = BD_ENET_RX_EMPTY; | |
2521 | bdp++; | |
2522 | } | |
2523 | ||
2524 | /* Set the last buffer to wrap. | |
2525 | */ | |
2526 | bdp--; | |
2527 | bdp->cbd_sc |= BD_SC_WRAP; | |
2528 | ||
2529 | /* ...and the same for transmmit. | |
2530 | */ | |
2531 | bdp = fep->tx_bd_base; | |
2532 | for (i=0; i<TX_RING_SIZE; i++) { | |
2533 | ||
2534 | /* Initialize the BD for every fragment in the page. | |
2535 | */ | |
2536 | bdp->cbd_sc = 0; | |
2537 | bdp->cbd_bufaddr = 0; | |
2538 | bdp++; | |
2539 | } | |
2540 | ||
2541 | /* Set the last buffer to wrap. | |
2542 | */ | |
2543 | bdp--; | |
2544 | bdp->cbd_sc |= BD_SC_WRAP; | |
2545 | ||
2546 | /* Enable MII mode. | |
2547 | */ | |
2548 | if (duplex) { | |
2549 | fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x04;/* MII enable */ | |
2550 | fecp->fec_x_cntrl = 0x04; /* FD enable */ | |
2551 | } | |
2552 | else { | |
2553 | /* MII enable|No Rcv on Xmit */ | |
2554 | fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x06; | |
2555 | fecp->fec_x_cntrl = 0x00; | |
2556 | } | |
2557 | fep->full_duplex = duplex; | |
2558 | ||
2559 | /* Set MII speed. | |
2560 | */ | |
2561 | fecp->fec_mii_speed = fep->phy_speed; | |
2562 | ||
2563 | /* And last, enable the transmit and receive processing. | |
2564 | */ | |
2565 | fecp->fec_ecntrl = 2; | |
6b265293 MW |
2566 | fecp->fec_r_des_active = 0; |
2567 | ||
2568 | /* Enable interrupts we wish to service. | |
2569 | */ | |
2570 | fecp->fec_imask = (FEC_ENET_TXF | FEC_ENET_TXB | | |
2571 | FEC_ENET_RXF | FEC_ENET_RXB | FEC_ENET_MII); | |
1da177e4 LT |
2572 | } |
2573 | ||
2574 | static void | |
2575 | fec_stop(struct net_device *dev) | |
2576 | { | |
2577 | volatile fec_t *fecp; | |
2578 | struct fec_enet_private *fep; | |
2579 | ||
2580 | fep = netdev_priv(dev); | |
2581 | fecp = fep->hwp; | |
2582 | ||
677177c5 PDM |
2583 | /* |
2584 | ** We cannot expect a graceful transmit stop without link !!! | |
2585 | */ | |
2586 | if (fep->link) | |
2587 | { | |
2588 | fecp->fec_x_cntrl = 0x01; /* Graceful transmit stop */ | |
2589 | udelay(10); | |
2590 | if (!(fecp->fec_ievent & FEC_ENET_GRA)) | |
2591 | printk("fec_stop : Graceful transmit stop did not complete !\n"); | |
2592 | } | |
1da177e4 LT |
2593 | |
2594 | /* Whack a reset. We should wait for this. | |
2595 | */ | |
2596 | fecp->fec_ecntrl = 1; | |
2597 | udelay(10); | |
2598 | ||
2599 | /* Clear outstanding MII command interrupts. | |
2600 | */ | |
2601 | fecp->fec_ievent = FEC_ENET_MII; | |
2602 | fec_enable_phy_intr(); | |
2603 | ||
2604 | fecp->fec_imask = FEC_ENET_MII; | |
2605 | fecp->fec_mii_speed = fep->phy_speed; | |
2606 | } | |
2607 | ||
2608 | static int __init fec_enet_module_init(void) | |
2609 | { | |
2610 | struct net_device *dev; | |
7dd6a2aa GU |
2611 | int i, j, err; |
2612 | ||
2613 | printk("FEC ENET Version 0.2\n"); | |
1da177e4 LT |
2614 | |
2615 | for (i = 0; (i < FEC_MAX_PORTS); i++) { | |
2616 | dev = alloc_etherdev(sizeof(struct fec_enet_private)); | |
2617 | if (!dev) | |
2618 | return -ENOMEM; | |
2619 | err = fec_enet_init(dev); | |
2620 | if (err) { | |
2621 | free_netdev(dev); | |
2622 | continue; | |
2623 | } | |
2624 | if (register_netdev(dev) != 0) { | |
2625 | /* XXX: missing cleanup here */ | |
2626 | free_netdev(dev); | |
2627 | return -EIO; | |
2628 | } | |
7dd6a2aa GU |
2629 | |
2630 | printk("%s: ethernet ", dev->name); | |
2631 | for (j = 0; (j < 5); j++) | |
2632 | printk("%02x:", dev->dev_addr[j]); | |
2633 | printk("%02x\n", dev->dev_addr[5]); | |
1da177e4 LT |
2634 | } |
2635 | return 0; | |
2636 | } | |
2637 | ||
2638 | module_init(fec_enet_module_init); | |
2639 | ||
2640 | MODULE_LICENSE("GPL"); |