Commit | Line | Data |
---|---|---|
0bbaf069 | 1 | /* |
1da177e4 LT |
2 | * drivers/net/gianfar.c |
3 | * | |
4 | * Gianfar Ethernet Driver | |
7f7f5316 AF |
5 | * This driver is designed for the non-CPM ethernet controllers |
6 | * on the 85xx and 83xx family of integrated processors | |
1da177e4 LT |
7 | * Based on 8260_io/fcc_enet.c |
8 | * | |
9 | * Author: Andy Fleming | |
4c8d3d99 | 10 | * Maintainer: Kumar Gala |
1da177e4 | 11 | * |
e8a2b6a4 | 12 | * Copyright (c) 2002-2006 Freescale Semiconductor, Inc. |
538cc7ee | 13 | * Copyright (c) 2007 MontaVista Software, Inc. |
1da177e4 LT |
14 | * |
15 | * This program is free software; you can redistribute it and/or modify it | |
16 | * under the terms of the GNU General Public License as published by the | |
17 | * Free Software Foundation; either version 2 of the License, or (at your | |
18 | * option) any later version. | |
19 | * | |
20 | * Gianfar: AKA Lambda Draconis, "Dragon" | |
21 | * RA 11 31 24.2 | |
22 | * Dec +69 19 52 | |
23 | * V 3.84 | |
24 | * B-V +1.62 | |
25 | * | |
26 | * Theory of operation | |
0bbaf069 | 27 | * |
1da177e4 LT |
28 | * The driver is initialized through platform_device. Structures which |
29 | * define the configuration needed by the board are defined in a | |
30 | * board structure in arch/ppc/platforms (though I do not | |
31 | * discount the possibility that other architectures could one | |
bb40dcbb | 32 | * day be supported. |
1da177e4 LT |
33 | * |
34 | * The Gianfar Ethernet Controller uses a ring of buffer | |
35 | * descriptors. The beginning is indicated by a register | |
0bbaf069 KG |
36 | * pointing to the physical address of the start of the ring. |
37 | * The end is determined by a "wrap" bit being set in the | |
1da177e4 LT |
38 | * last descriptor of the ring. |
39 | * | |
40 | * When a packet is received, the RXF bit in the | |
0bbaf069 | 41 | * IEVENT register is set, triggering an interrupt when the |
1da177e4 LT |
42 | * corresponding bit in the IMASK register is also set (if |
43 | * interrupt coalescing is active, then the interrupt may not | |
44 | * happen immediately, but will wait until either a set number | |
bb40dcbb | 45 | * of frames or amount of time have passed). In NAPI, the |
1da177e4 LT |
46 | * interrupt handler will signal there is work to be done, and |
47 | * exit. Without NAPI, the packet(s) will be handled | |
48 | * immediately. Both methods will start at the last known empty | |
0bbaf069 | 49 | * descriptor, and process every subsequent descriptor until there |
1da177e4 LT |
50 | * are none left with data (NAPI will stop after a set number of |
51 | * packets to give time to other tasks, but will eventually | |
52 | * process all the packets). The data arrives inside a | |
53 | * pre-allocated skb, and so after the skb is passed up to the | |
54 | * stack, a new skb must be allocated, and the address field in | |
55 | * the buffer descriptor must be updated to indicate this new | |
56 | * skb. | |
57 | * | |
58 | * When the kernel requests that a packet be transmitted, the | |
59 | * driver starts where it left off last time, and points the | |
60 | * descriptor at the buffer which was passed in. The driver | |
61 | * then informs the DMA engine that there are packets ready to | |
62 | * be transmitted. Once the controller is finished transmitting | |
63 | * the packet, an interrupt may be triggered (under the same | |
64 | * conditions as for reception, but depending on the TXF bit). | |
65 | * The driver then cleans up the buffer. | |
66 | */ | |
67 | ||
1da177e4 | 68 | #include <linux/kernel.h> |
1da177e4 LT |
69 | #include <linux/string.h> |
70 | #include <linux/errno.h> | |
bb40dcbb | 71 | #include <linux/unistd.h> |
1da177e4 LT |
72 | #include <linux/slab.h> |
73 | #include <linux/interrupt.h> | |
74 | #include <linux/init.h> | |
75 | #include <linux/delay.h> | |
76 | #include <linux/netdevice.h> | |
77 | #include <linux/etherdevice.h> | |
78 | #include <linux/skbuff.h> | |
0bbaf069 | 79 | #include <linux/if_vlan.h> |
1da177e4 LT |
80 | #include <linux/spinlock.h> |
81 | #include <linux/mm.h> | |
d052d1be | 82 | #include <linux/platform_device.h> |
0bbaf069 KG |
83 | #include <linux/ip.h> |
84 | #include <linux/tcp.h> | |
85 | #include <linux/udp.h> | |
9c07b884 | 86 | #include <linux/in.h> |
1da177e4 LT |
87 | |
88 | #include <asm/io.h> | |
89 | #include <asm/irq.h> | |
90 | #include <asm/uaccess.h> | |
91 | #include <linux/module.h> | |
1da177e4 LT |
92 | #include <linux/dma-mapping.h> |
93 | #include <linux/crc32.h> | |
bb40dcbb AF |
94 | #include <linux/mii.h> |
95 | #include <linux/phy.h> | |
1da177e4 LT |
96 | |
97 | #include "gianfar.h" | |
bb40dcbb | 98 | #include "gianfar_mii.h" |
1da177e4 LT |
99 | |
100 | #define TX_TIMEOUT (1*HZ) | |
1da177e4 LT |
101 | #undef BRIEF_GFAR_ERRORS |
102 | #undef VERBOSE_GFAR_ERRORS | |
103 | ||
104 | #ifdef CONFIG_GFAR_NAPI | |
105 | #define RECEIVE(x) netif_receive_skb(x) | |
106 | #else | |
107 | #define RECEIVE(x) netif_rx(x) | |
108 | #endif | |
109 | ||
110 | const char gfar_driver_name[] = "Gianfar Ethernet"; | |
7f7f5316 | 111 | const char gfar_driver_version[] = "1.3"; |
1da177e4 | 112 | |
1da177e4 LT |
113 | static int gfar_enet_open(struct net_device *dev); |
114 | static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev); | |
115 | static void gfar_timeout(struct net_device *dev); | |
116 | static int gfar_close(struct net_device *dev); | |
815b97c6 AF |
117 | struct sk_buff *gfar_new_skb(struct net_device *dev); |
118 | static void gfar_new_rxbdp(struct net_device *dev, struct rxbd8 *bdp, | |
119 | struct sk_buff *skb); | |
1da177e4 LT |
120 | static int gfar_set_mac_address(struct net_device *dev); |
121 | static int gfar_change_mtu(struct net_device *dev, int new_mtu); | |
7d12e780 DH |
122 | static irqreturn_t gfar_error(int irq, void *dev_id); |
123 | static irqreturn_t gfar_transmit(int irq, void *dev_id); | |
124 | static irqreturn_t gfar_interrupt(int irq, void *dev_id); | |
1da177e4 LT |
125 | static void adjust_link(struct net_device *dev); |
126 | static void init_registers(struct net_device *dev); | |
127 | static int init_phy(struct net_device *dev); | |
3ae5eaec RK |
128 | static int gfar_probe(struct platform_device *pdev); |
129 | static int gfar_remove(struct platform_device *pdev); | |
bb40dcbb | 130 | static void free_skb_resources(struct gfar_private *priv); |
1da177e4 LT |
131 | static void gfar_set_multi(struct net_device *dev); |
132 | static void gfar_set_hash_for_addr(struct net_device *dev, u8 *addr); | |
d3c12873 | 133 | static void gfar_configure_serdes(struct net_device *dev); |
fdb26629 AV |
134 | extern int gfar_local_mdio_write(struct gfar_mii __iomem *regs, int mii_id, int regnum, u16 value); |
135 | extern int gfar_local_mdio_read(struct gfar_mii __iomem *regs, int mii_id, int regnum); | |
1da177e4 | 136 | #ifdef CONFIG_GFAR_NAPI |
bea3348e | 137 | static int gfar_poll(struct napi_struct *napi, int budget); |
1da177e4 | 138 | #endif |
f2d71c2d VW |
139 | #ifdef CONFIG_NET_POLL_CONTROLLER |
140 | static void gfar_netpoll(struct net_device *dev); | |
141 | #endif | |
0bbaf069 | 142 | int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit); |
1da177e4 | 143 | static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb, int length); |
0bbaf069 KG |
144 | static void gfar_vlan_rx_register(struct net_device *netdev, |
145 | struct vlan_group *grp); | |
7f7f5316 AF |
146 | void gfar_halt(struct net_device *dev); |
147 | void gfar_start(struct net_device *dev); | |
148 | static void gfar_clear_exact_match(struct net_device *dev); | |
149 | static void gfar_set_mac_for_addr(struct net_device *dev, int num, u8 *addr); | |
1da177e4 | 150 | |
7282d491 | 151 | extern const struct ethtool_ops gfar_ethtool_ops; |
1da177e4 LT |
152 | |
153 | MODULE_AUTHOR("Freescale Semiconductor, Inc"); | |
154 | MODULE_DESCRIPTION("Gianfar Ethernet Driver"); | |
155 | MODULE_LICENSE("GPL"); | |
156 | ||
7f7f5316 AF |
157 | /* Returns 1 if incoming frames use an FCB */ |
158 | static inline int gfar_uses_fcb(struct gfar_private *priv) | |
0bbaf069 | 159 | { |
7f7f5316 | 160 | return (priv->vlan_enable || priv->rx_csum_enable); |
0bbaf069 | 161 | } |
bb40dcbb AF |
162 | |
163 | /* Set up the ethernet device structure, private data, | |
164 | * and anything else we need before we start */ | |
3ae5eaec | 165 | static int gfar_probe(struct platform_device *pdev) |
1da177e4 LT |
166 | { |
167 | u32 tempval; | |
168 | struct net_device *dev = NULL; | |
169 | struct gfar_private *priv = NULL; | |
1da177e4 LT |
170 | struct gianfar_platform_data *einfo; |
171 | struct resource *r; | |
1da177e4 | 172 | int err = 0; |
0795af57 | 173 | DECLARE_MAC_BUF(mac); |
1da177e4 LT |
174 | |
175 | einfo = (struct gianfar_platform_data *) pdev->dev.platform_data; | |
176 | ||
bb40dcbb | 177 | if (NULL == einfo) { |
1da177e4 LT |
178 | printk(KERN_ERR "gfar %d: Missing additional data!\n", |
179 | pdev->id); | |
180 | ||
181 | return -ENODEV; | |
182 | } | |
183 | ||
184 | /* Create an ethernet device instance */ | |
185 | dev = alloc_etherdev(sizeof (*priv)); | |
186 | ||
bb40dcbb | 187 | if (NULL == dev) |
1da177e4 LT |
188 | return -ENOMEM; |
189 | ||
190 | priv = netdev_priv(dev); | |
bea3348e | 191 | priv->dev = dev; |
1da177e4 LT |
192 | |
193 | /* Set the info in the priv to the current info */ | |
194 | priv->einfo = einfo; | |
195 | ||
196 | /* fill out IRQ fields */ | |
197 | if (einfo->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) { | |
198 | priv->interruptTransmit = platform_get_irq_byname(pdev, "tx"); | |
199 | priv->interruptReceive = platform_get_irq_byname(pdev, "rx"); | |
200 | priv->interruptError = platform_get_irq_byname(pdev, "error"); | |
48944738 DV |
201 | if (priv->interruptTransmit < 0 || priv->interruptReceive < 0 || priv->interruptError < 0) |
202 | goto regs_fail; | |
1da177e4 LT |
203 | } else { |
204 | priv->interruptTransmit = platform_get_irq(pdev, 0); | |
48944738 DV |
205 | if (priv->interruptTransmit < 0) |
206 | goto regs_fail; | |
1da177e4 LT |
207 | } |
208 | ||
209 | /* get a pointer to the register memory */ | |
210 | r = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
cc8c6e37 | 211 | priv->regs = ioremap(r->start, sizeof (struct gfar)); |
1da177e4 | 212 | |
bb40dcbb | 213 | if (NULL == priv->regs) { |
1da177e4 LT |
214 | err = -ENOMEM; |
215 | goto regs_fail; | |
216 | } | |
217 | ||
fef6108d AF |
218 | spin_lock_init(&priv->txlock); |
219 | spin_lock_init(&priv->rxlock); | |
1da177e4 | 220 | |
3ae5eaec | 221 | platform_set_drvdata(pdev, dev); |
1da177e4 LT |
222 | |
223 | /* Stop the DMA engine now, in case it was running before */ | |
224 | /* (The firmware could have used it, and left it running). */ | |
225 | /* To do this, we write Graceful Receive Stop and Graceful */ | |
226 | /* Transmit Stop, and then wait until the corresponding bits */ | |
227 | /* in IEVENT indicate the stops have completed. */ | |
228 | tempval = gfar_read(&priv->regs->dmactrl); | |
229 | tempval &= ~(DMACTRL_GRS | DMACTRL_GTS); | |
230 | gfar_write(&priv->regs->dmactrl, tempval); | |
231 | ||
232 | tempval = gfar_read(&priv->regs->dmactrl); | |
233 | tempval |= (DMACTRL_GRS | DMACTRL_GTS); | |
234 | gfar_write(&priv->regs->dmactrl, tempval); | |
235 | ||
236 | while (!(gfar_read(&priv->regs->ievent) & (IEVENT_GRSC | IEVENT_GTSC))) | |
237 | cpu_relax(); | |
238 | ||
239 | /* Reset MAC layer */ | |
240 | gfar_write(&priv->regs->maccfg1, MACCFG1_SOFT_RESET); | |
241 | ||
242 | tempval = (MACCFG1_TX_FLOW | MACCFG1_RX_FLOW); | |
243 | gfar_write(&priv->regs->maccfg1, tempval); | |
244 | ||
245 | /* Initialize MACCFG2. */ | |
246 | gfar_write(&priv->regs->maccfg2, MACCFG2_INIT_SETTINGS); | |
247 | ||
248 | /* Initialize ECNTRL */ | |
249 | gfar_write(&priv->regs->ecntrl, ECNTRL_INIT_SETTINGS); | |
250 | ||
251 | /* Copy the station address into the dev structure, */ | |
252 | memcpy(dev->dev_addr, einfo->mac_addr, MAC_ADDR_LEN); | |
253 | ||
254 | /* Set the dev->base_addr to the gfar reg region */ | |
255 | dev->base_addr = (unsigned long) (priv->regs); | |
256 | ||
3ae5eaec | 257 | SET_NETDEV_DEV(dev, &pdev->dev); |
1da177e4 LT |
258 | |
259 | /* Fill in the dev structure */ | |
260 | dev->open = gfar_enet_open; | |
261 | dev->hard_start_xmit = gfar_start_xmit; | |
262 | dev->tx_timeout = gfar_timeout; | |
263 | dev->watchdog_timeo = TX_TIMEOUT; | |
94e8cc35 | 264 | #ifdef CONFIG_GFAR_NAPI |
bea3348e | 265 | netif_napi_add(dev, &priv->napi, gfar_poll, GFAR_DEV_WEIGHT); |
94e8cc35 | 266 | #endif |
f2d71c2d VW |
267 | #ifdef CONFIG_NET_POLL_CONTROLLER |
268 | dev->poll_controller = gfar_netpoll; | |
1da177e4 LT |
269 | #endif |
270 | dev->stop = gfar_close; | |
1da177e4 LT |
271 | dev->change_mtu = gfar_change_mtu; |
272 | dev->mtu = 1500; | |
273 | dev->set_multicast_list = gfar_set_multi; | |
274 | ||
0bbaf069 KG |
275 | dev->ethtool_ops = &gfar_ethtool_ops; |
276 | ||
277 | if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_CSUM) { | |
278 | priv->rx_csum_enable = 1; | |
279 | dev->features |= NETIF_F_IP_CSUM; | |
280 | } else | |
281 | priv->rx_csum_enable = 0; | |
282 | ||
283 | priv->vlgrp = NULL; | |
1da177e4 | 284 | |
0bbaf069 KG |
285 | if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_VLAN) { |
286 | dev->vlan_rx_register = gfar_vlan_rx_register; | |
1da177e4 | 287 | |
0bbaf069 KG |
288 | dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; |
289 | ||
290 | priv->vlan_enable = 1; | |
291 | } | |
292 | ||
293 | if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_EXTENDED_HASH) { | |
294 | priv->extended_hash = 1; | |
295 | priv->hash_width = 9; | |
296 | ||
297 | priv->hash_regs[0] = &priv->regs->igaddr0; | |
298 | priv->hash_regs[1] = &priv->regs->igaddr1; | |
299 | priv->hash_regs[2] = &priv->regs->igaddr2; | |
300 | priv->hash_regs[3] = &priv->regs->igaddr3; | |
301 | priv->hash_regs[4] = &priv->regs->igaddr4; | |
302 | priv->hash_regs[5] = &priv->regs->igaddr5; | |
303 | priv->hash_regs[6] = &priv->regs->igaddr6; | |
304 | priv->hash_regs[7] = &priv->regs->igaddr7; | |
305 | priv->hash_regs[8] = &priv->regs->gaddr0; | |
306 | priv->hash_regs[9] = &priv->regs->gaddr1; | |
307 | priv->hash_regs[10] = &priv->regs->gaddr2; | |
308 | priv->hash_regs[11] = &priv->regs->gaddr3; | |
309 | priv->hash_regs[12] = &priv->regs->gaddr4; | |
310 | priv->hash_regs[13] = &priv->regs->gaddr5; | |
311 | priv->hash_regs[14] = &priv->regs->gaddr6; | |
312 | priv->hash_regs[15] = &priv->regs->gaddr7; | |
313 | ||
314 | } else { | |
315 | priv->extended_hash = 0; | |
316 | priv->hash_width = 8; | |
317 | ||
318 | priv->hash_regs[0] = &priv->regs->gaddr0; | |
319 | priv->hash_regs[1] = &priv->regs->gaddr1; | |
320 | priv->hash_regs[2] = &priv->regs->gaddr2; | |
321 | priv->hash_regs[3] = &priv->regs->gaddr3; | |
322 | priv->hash_regs[4] = &priv->regs->gaddr4; | |
323 | priv->hash_regs[5] = &priv->regs->gaddr5; | |
324 | priv->hash_regs[6] = &priv->regs->gaddr6; | |
325 | priv->hash_regs[7] = &priv->regs->gaddr7; | |
326 | } | |
327 | ||
328 | if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_PADDING) | |
329 | priv->padding = DEFAULT_PADDING; | |
330 | else | |
331 | priv->padding = 0; | |
332 | ||
0bbaf069 KG |
333 | if (dev->features & NETIF_F_IP_CSUM) |
334 | dev->hard_header_len += GMAC_FCB_LEN; | |
1da177e4 LT |
335 | |
336 | priv->rx_buffer_size = DEFAULT_RX_BUFFER_SIZE; | |
1da177e4 LT |
337 | priv->tx_ring_size = DEFAULT_TX_RING_SIZE; |
338 | priv->rx_ring_size = DEFAULT_RX_RING_SIZE; | |
339 | ||
340 | priv->txcoalescing = DEFAULT_TX_COALESCE; | |
341 | priv->txcount = DEFAULT_TXCOUNT; | |
342 | priv->txtime = DEFAULT_TXTIME; | |
343 | priv->rxcoalescing = DEFAULT_RX_COALESCE; | |
344 | priv->rxcount = DEFAULT_RXCOUNT; | |
345 | priv->rxtime = DEFAULT_RXTIME; | |
346 | ||
0bbaf069 KG |
347 | /* Enable most messages by default */ |
348 | priv->msg_enable = (NETIF_MSG_IFUP << 1 ) - 1; | |
349 | ||
1da177e4 LT |
350 | err = register_netdev(dev); |
351 | ||
352 | if (err) { | |
353 | printk(KERN_ERR "%s: Cannot register net device, aborting.\n", | |
354 | dev->name); | |
355 | goto register_fail; | |
356 | } | |
357 | ||
7f7f5316 AF |
358 | /* Create all the sysfs files */ |
359 | gfar_init_sysfs(dev); | |
360 | ||
1da177e4 | 361 | /* Print out the device info */ |
0795af57 JP |
362 | printk(KERN_INFO DEVICE_NAME "%s\n", |
363 | dev->name, print_mac(mac, dev->dev_addr)); | |
1da177e4 LT |
364 | |
365 | /* Even more device info helps when determining which kernel */ | |
7f7f5316 | 366 | /* provided which set of benchmarks. */ |
1da177e4 LT |
367 | #ifdef CONFIG_GFAR_NAPI |
368 | printk(KERN_INFO "%s: Running with NAPI enabled\n", dev->name); | |
369 | #else | |
370 | printk(KERN_INFO "%s: Running with NAPI disabled\n", dev->name); | |
371 | #endif | |
372 | printk(KERN_INFO "%s: %d/%d RX/TX BD ring size\n", | |
373 | dev->name, priv->rx_ring_size, priv->tx_ring_size); | |
374 | ||
375 | return 0; | |
376 | ||
377 | register_fail: | |
cc8c6e37 | 378 | iounmap(priv->regs); |
1da177e4 LT |
379 | regs_fail: |
380 | free_netdev(dev); | |
bb40dcbb | 381 | return err; |
1da177e4 LT |
382 | } |
383 | ||
3ae5eaec | 384 | static int gfar_remove(struct platform_device *pdev) |
1da177e4 | 385 | { |
3ae5eaec | 386 | struct net_device *dev = platform_get_drvdata(pdev); |
1da177e4 LT |
387 | struct gfar_private *priv = netdev_priv(dev); |
388 | ||
3ae5eaec | 389 | platform_set_drvdata(pdev, NULL); |
1da177e4 | 390 | |
cc8c6e37 | 391 | iounmap(priv->regs); |
1da177e4 LT |
392 | free_netdev(dev); |
393 | ||
394 | return 0; | |
395 | } | |
396 | ||
397 | ||
e8a2b6a4 AF |
398 | /* Reads the controller's registers to determine what interface |
399 | * connects it to the PHY. | |
400 | */ | |
401 | static phy_interface_t gfar_get_interface(struct net_device *dev) | |
402 | { | |
403 | struct gfar_private *priv = netdev_priv(dev); | |
404 | u32 ecntrl = gfar_read(&priv->regs->ecntrl); | |
405 | ||
406 | if (ecntrl & ECNTRL_SGMII_MODE) | |
407 | return PHY_INTERFACE_MODE_SGMII; | |
408 | ||
409 | if (ecntrl & ECNTRL_TBI_MODE) { | |
410 | if (ecntrl & ECNTRL_REDUCED_MODE) | |
411 | return PHY_INTERFACE_MODE_RTBI; | |
412 | else | |
413 | return PHY_INTERFACE_MODE_TBI; | |
414 | } | |
415 | ||
416 | if (ecntrl & ECNTRL_REDUCED_MODE) { | |
417 | if (ecntrl & ECNTRL_REDUCED_MII_MODE) | |
418 | return PHY_INTERFACE_MODE_RMII; | |
7132ab7f AF |
419 | else { |
420 | phy_interface_t interface = priv->einfo->interface; | |
421 | ||
422 | /* | |
423 | * This isn't autodetected right now, so it must | |
424 | * be set by the device tree or platform code. | |
425 | */ | |
426 | if (interface == PHY_INTERFACE_MODE_RGMII_ID) | |
427 | return PHY_INTERFACE_MODE_RGMII_ID; | |
428 | ||
e8a2b6a4 | 429 | return PHY_INTERFACE_MODE_RGMII; |
7132ab7f | 430 | } |
e8a2b6a4 AF |
431 | } |
432 | ||
433 | if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT) | |
434 | return PHY_INTERFACE_MODE_GMII; | |
435 | ||
436 | return PHY_INTERFACE_MODE_MII; | |
437 | } | |
438 | ||
439 | ||
bb40dcbb AF |
440 | /* Initializes driver's PHY state, and attaches to the PHY. |
441 | * Returns 0 on success. | |
1da177e4 LT |
442 | */ |
443 | static int init_phy(struct net_device *dev) | |
444 | { | |
445 | struct gfar_private *priv = netdev_priv(dev); | |
bb40dcbb AF |
446 | uint gigabit_support = |
447 | priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT ? | |
448 | SUPPORTED_1000baseT_Full : 0; | |
449 | struct phy_device *phydev; | |
4d3248a2 | 450 | char phy_id[BUS_ID_SIZE]; |
e8a2b6a4 | 451 | phy_interface_t interface; |
1da177e4 LT |
452 | |
453 | priv->oldlink = 0; | |
454 | priv->oldspeed = 0; | |
455 | priv->oldduplex = -1; | |
456 | ||
4d3248a2 KG |
457 | snprintf(phy_id, BUS_ID_SIZE, PHY_ID_FMT, priv->einfo->bus_id, priv->einfo->phy_id); |
458 | ||
e8a2b6a4 AF |
459 | interface = gfar_get_interface(dev); |
460 | ||
461 | phydev = phy_connect(dev, phy_id, &adjust_link, 0, interface); | |
1da177e4 | 462 | |
d3c12873 KJ |
463 | if (interface == PHY_INTERFACE_MODE_SGMII) |
464 | gfar_configure_serdes(dev); | |
465 | ||
bb40dcbb AF |
466 | if (IS_ERR(phydev)) { |
467 | printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name); | |
468 | return PTR_ERR(phydev); | |
1da177e4 LT |
469 | } |
470 | ||
bb40dcbb AF |
471 | /* Remove any features not supported by the controller */ |
472 | phydev->supported &= (GFAR_SUPPORTED | gigabit_support); | |
473 | phydev->advertising = phydev->supported; | |
1da177e4 | 474 | |
bb40dcbb | 475 | priv->phydev = phydev; |
1da177e4 LT |
476 | |
477 | return 0; | |
1da177e4 LT |
478 | } |
479 | ||
d3c12873 KJ |
480 | static void gfar_configure_serdes(struct net_device *dev) |
481 | { | |
482 | struct gfar_private *priv = netdev_priv(dev); | |
483 | struct gfar_mii __iomem *regs = | |
484 | (void __iomem *)&priv->regs->gfar_mii_regs; | |
485 | ||
486 | /* Initialise TBI i/f to communicate with serdes (lynx phy) */ | |
487 | ||
488 | /* Single clk mode, mii mode off(for aerdes communication) */ | |
489 | gfar_local_mdio_write(regs, TBIPA_VALUE, MII_TBICON, TBICON_CLK_SELECT); | |
490 | ||
491 | /* Supported pause and full-duplex, no half-duplex */ | |
492 | gfar_local_mdio_write(regs, TBIPA_VALUE, MII_ADVERTISE, | |
493 | ADVERTISE_1000XFULL | ADVERTISE_1000XPAUSE | | |
494 | ADVERTISE_1000XPSE_ASYM); | |
495 | ||
496 | /* ANEG enable, restart ANEG, full duplex mode, speed[1] set */ | |
497 | gfar_local_mdio_write(regs, TBIPA_VALUE, MII_BMCR, BMCR_ANENABLE | | |
498 | BMCR_ANRESTART | BMCR_FULLDPLX | BMCR_SPEED1000); | |
499 | } | |
500 | ||
1da177e4 LT |
501 | static void init_registers(struct net_device *dev) |
502 | { | |
503 | struct gfar_private *priv = netdev_priv(dev); | |
504 | ||
505 | /* Clear IEVENT */ | |
506 | gfar_write(&priv->regs->ievent, IEVENT_INIT_CLEAR); | |
507 | ||
508 | /* Initialize IMASK */ | |
509 | gfar_write(&priv->regs->imask, IMASK_INIT_CLEAR); | |
510 | ||
511 | /* Init hash registers to zero */ | |
0bbaf069 KG |
512 | gfar_write(&priv->regs->igaddr0, 0); |
513 | gfar_write(&priv->regs->igaddr1, 0); | |
514 | gfar_write(&priv->regs->igaddr2, 0); | |
515 | gfar_write(&priv->regs->igaddr3, 0); | |
516 | gfar_write(&priv->regs->igaddr4, 0); | |
517 | gfar_write(&priv->regs->igaddr5, 0); | |
518 | gfar_write(&priv->regs->igaddr6, 0); | |
519 | gfar_write(&priv->regs->igaddr7, 0); | |
1da177e4 LT |
520 | |
521 | gfar_write(&priv->regs->gaddr0, 0); | |
522 | gfar_write(&priv->regs->gaddr1, 0); | |
523 | gfar_write(&priv->regs->gaddr2, 0); | |
524 | gfar_write(&priv->regs->gaddr3, 0); | |
525 | gfar_write(&priv->regs->gaddr4, 0); | |
526 | gfar_write(&priv->regs->gaddr5, 0); | |
527 | gfar_write(&priv->regs->gaddr6, 0); | |
528 | gfar_write(&priv->regs->gaddr7, 0); | |
529 | ||
1da177e4 LT |
530 | /* Zero out the rmon mib registers if it has them */ |
531 | if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_RMON) { | |
cc8c6e37 | 532 | memset_io(&(priv->regs->rmon), 0, sizeof (struct rmon_mib)); |
1da177e4 LT |
533 | |
534 | /* Mask off the CAM interrupts */ | |
535 | gfar_write(&priv->regs->rmon.cam1, 0xffffffff); | |
536 | gfar_write(&priv->regs->rmon.cam2, 0xffffffff); | |
537 | } | |
538 | ||
539 | /* Initialize the max receive buffer length */ | |
540 | gfar_write(&priv->regs->mrblr, priv->rx_buffer_size); | |
541 | ||
1da177e4 LT |
542 | /* Initialize the Minimum Frame Length Register */ |
543 | gfar_write(&priv->regs->minflr, MINFLR_INIT_SETTINGS); | |
544 | ||
1da177e4 LT |
545 | /* Assign the TBI an address which won't conflict with the PHYs */ |
546 | gfar_write(&priv->regs->tbipa, TBIPA_VALUE); | |
547 | } | |
548 | ||
0bbaf069 KG |
549 | |
550 | /* Halt the receive and transmit queues */ | |
551 | void gfar_halt(struct net_device *dev) | |
1da177e4 LT |
552 | { |
553 | struct gfar_private *priv = netdev_priv(dev); | |
cc8c6e37 | 554 | struct gfar __iomem *regs = priv->regs; |
1da177e4 LT |
555 | u32 tempval; |
556 | ||
1da177e4 LT |
557 | /* Mask all interrupts */ |
558 | gfar_write(®s->imask, IMASK_INIT_CLEAR); | |
559 | ||
560 | /* Clear all interrupts */ | |
561 | gfar_write(®s->ievent, IEVENT_INIT_CLEAR); | |
562 | ||
563 | /* Stop the DMA, and wait for it to stop */ | |
564 | tempval = gfar_read(&priv->regs->dmactrl); | |
565 | if ((tempval & (DMACTRL_GRS | DMACTRL_GTS)) | |
566 | != (DMACTRL_GRS | DMACTRL_GTS)) { | |
567 | tempval |= (DMACTRL_GRS | DMACTRL_GTS); | |
568 | gfar_write(&priv->regs->dmactrl, tempval); | |
569 | ||
570 | while (!(gfar_read(&priv->regs->ievent) & | |
571 | (IEVENT_GRSC | IEVENT_GTSC))) | |
572 | cpu_relax(); | |
573 | } | |
574 | ||
575 | /* Disable Rx and Tx */ | |
576 | tempval = gfar_read(®s->maccfg1); | |
577 | tempval &= ~(MACCFG1_RX_EN | MACCFG1_TX_EN); | |
578 | gfar_write(®s->maccfg1, tempval); | |
0bbaf069 KG |
579 | } |
580 | ||
581 | void stop_gfar(struct net_device *dev) | |
582 | { | |
583 | struct gfar_private *priv = netdev_priv(dev); | |
cc8c6e37 | 584 | struct gfar __iomem *regs = priv->regs; |
0bbaf069 KG |
585 | unsigned long flags; |
586 | ||
bb40dcbb AF |
587 | phy_stop(priv->phydev); |
588 | ||
0bbaf069 | 589 | /* Lock it down */ |
fef6108d AF |
590 | spin_lock_irqsave(&priv->txlock, flags); |
591 | spin_lock(&priv->rxlock); | |
0bbaf069 | 592 | |
0bbaf069 | 593 | gfar_halt(dev); |
1da177e4 | 594 | |
fef6108d AF |
595 | spin_unlock(&priv->rxlock); |
596 | spin_unlock_irqrestore(&priv->txlock, flags); | |
1da177e4 LT |
597 | |
598 | /* Free the IRQs */ | |
599 | if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) { | |
600 | free_irq(priv->interruptError, dev); | |
601 | free_irq(priv->interruptTransmit, dev); | |
602 | free_irq(priv->interruptReceive, dev); | |
603 | } else { | |
bb40dcbb | 604 | free_irq(priv->interruptTransmit, dev); |
1da177e4 LT |
605 | } |
606 | ||
607 | free_skb_resources(priv); | |
608 | ||
cf782298 | 609 | dma_free_coherent(&dev->dev, |
1da177e4 LT |
610 | sizeof(struct txbd8)*priv->tx_ring_size |
611 | + sizeof(struct rxbd8)*priv->rx_ring_size, | |
612 | priv->tx_bd_base, | |
0bbaf069 | 613 | gfar_read(®s->tbase0)); |
1da177e4 LT |
614 | } |
615 | ||
616 | /* If there are any tx skbs or rx skbs still around, free them. | |
617 | * Then free tx_skbuff and rx_skbuff */ | |
bb40dcbb | 618 | static void free_skb_resources(struct gfar_private *priv) |
1da177e4 LT |
619 | { |
620 | struct rxbd8 *rxbdp; | |
621 | struct txbd8 *txbdp; | |
622 | int i; | |
623 | ||
624 | /* Go through all the buffer descriptors and free their data buffers */ | |
625 | txbdp = priv->tx_bd_base; | |
626 | ||
627 | for (i = 0; i < priv->tx_ring_size; i++) { | |
628 | ||
629 | if (priv->tx_skbuff[i]) { | |
cf782298 | 630 | dma_unmap_single(&priv->dev->dev, txbdp->bufPtr, |
1da177e4 LT |
631 | txbdp->length, |
632 | DMA_TO_DEVICE); | |
633 | dev_kfree_skb_any(priv->tx_skbuff[i]); | |
634 | priv->tx_skbuff[i] = NULL; | |
635 | } | |
636 | } | |
637 | ||
638 | kfree(priv->tx_skbuff); | |
639 | ||
640 | rxbdp = priv->rx_bd_base; | |
641 | ||
642 | /* rx_skbuff is not guaranteed to be allocated, so only | |
643 | * free it and its contents if it is allocated */ | |
644 | if(priv->rx_skbuff != NULL) { | |
645 | for (i = 0; i < priv->rx_ring_size; i++) { | |
646 | if (priv->rx_skbuff[i]) { | |
cf782298 | 647 | dma_unmap_single(&priv->dev->dev, rxbdp->bufPtr, |
7f7f5316 | 648 | priv->rx_buffer_size, |
1da177e4 LT |
649 | DMA_FROM_DEVICE); |
650 | ||
651 | dev_kfree_skb_any(priv->rx_skbuff[i]); | |
652 | priv->rx_skbuff[i] = NULL; | |
653 | } | |
654 | ||
655 | rxbdp->status = 0; | |
656 | rxbdp->length = 0; | |
657 | rxbdp->bufPtr = 0; | |
658 | ||
659 | rxbdp++; | |
660 | } | |
661 | ||
662 | kfree(priv->rx_skbuff); | |
663 | } | |
664 | } | |
665 | ||
0bbaf069 KG |
666 | void gfar_start(struct net_device *dev) |
667 | { | |
668 | struct gfar_private *priv = netdev_priv(dev); | |
cc8c6e37 | 669 | struct gfar __iomem *regs = priv->regs; |
0bbaf069 KG |
670 | u32 tempval; |
671 | ||
672 | /* Enable Rx and Tx in MACCFG1 */ | |
673 | tempval = gfar_read(®s->maccfg1); | |
674 | tempval |= (MACCFG1_RX_EN | MACCFG1_TX_EN); | |
675 | gfar_write(®s->maccfg1, tempval); | |
676 | ||
677 | /* Initialize DMACTRL to have WWR and WOP */ | |
678 | tempval = gfar_read(&priv->regs->dmactrl); | |
679 | tempval |= DMACTRL_INIT_SETTINGS; | |
680 | gfar_write(&priv->regs->dmactrl, tempval); | |
681 | ||
0bbaf069 KG |
682 | /* Make sure we aren't stopped */ |
683 | tempval = gfar_read(&priv->regs->dmactrl); | |
684 | tempval &= ~(DMACTRL_GRS | DMACTRL_GTS); | |
685 | gfar_write(&priv->regs->dmactrl, tempval); | |
686 | ||
fef6108d AF |
687 | /* Clear THLT/RHLT, so that the DMA starts polling now */ |
688 | gfar_write(®s->tstat, TSTAT_CLEAR_THALT); | |
689 | gfar_write(®s->rstat, RSTAT_CLEAR_RHALT); | |
690 | ||
0bbaf069 KG |
691 | /* Unmask the interrupts we look for */ |
692 | gfar_write(®s->imask, IMASK_DEFAULT); | |
693 | } | |
694 | ||
1da177e4 LT |
695 | /* Bring the controller up and running */ |
696 | int startup_gfar(struct net_device *dev) | |
697 | { | |
698 | struct txbd8 *txbdp; | |
699 | struct rxbd8 *rxbdp; | |
f9663aea | 700 | dma_addr_t addr = 0; |
1da177e4 LT |
701 | unsigned long vaddr; |
702 | int i; | |
703 | struct gfar_private *priv = netdev_priv(dev); | |
cc8c6e37 | 704 | struct gfar __iomem *regs = priv->regs; |
1da177e4 | 705 | int err = 0; |
0bbaf069 | 706 | u32 rctrl = 0; |
7f7f5316 | 707 | u32 attrs = 0; |
1da177e4 LT |
708 | |
709 | gfar_write(®s->imask, IMASK_INIT_CLEAR); | |
710 | ||
711 | /* Allocate memory for the buffer descriptors */ | |
cf782298 | 712 | vaddr = (unsigned long) dma_alloc_coherent(&dev->dev, |
1da177e4 LT |
713 | sizeof (struct txbd8) * priv->tx_ring_size + |
714 | sizeof (struct rxbd8) * priv->rx_ring_size, | |
715 | &addr, GFP_KERNEL); | |
716 | ||
717 | if (vaddr == 0) { | |
0bbaf069 KG |
718 | if (netif_msg_ifup(priv)) |
719 | printk(KERN_ERR "%s: Could not allocate buffer descriptors!\n", | |
720 | dev->name); | |
1da177e4 LT |
721 | return -ENOMEM; |
722 | } | |
723 | ||
724 | priv->tx_bd_base = (struct txbd8 *) vaddr; | |
725 | ||
726 | /* enet DMA only understands physical addresses */ | |
0bbaf069 | 727 | gfar_write(®s->tbase0, addr); |
1da177e4 LT |
728 | |
729 | /* Start the rx descriptor ring where the tx ring leaves off */ | |
730 | addr = addr + sizeof (struct txbd8) * priv->tx_ring_size; | |
731 | vaddr = vaddr + sizeof (struct txbd8) * priv->tx_ring_size; | |
732 | priv->rx_bd_base = (struct rxbd8 *) vaddr; | |
0bbaf069 | 733 | gfar_write(®s->rbase0, addr); |
1da177e4 LT |
734 | |
735 | /* Setup the skbuff rings */ | |
736 | priv->tx_skbuff = | |
737 | (struct sk_buff **) kmalloc(sizeof (struct sk_buff *) * | |
738 | priv->tx_ring_size, GFP_KERNEL); | |
739 | ||
bb40dcbb | 740 | if (NULL == priv->tx_skbuff) { |
0bbaf069 KG |
741 | if (netif_msg_ifup(priv)) |
742 | printk(KERN_ERR "%s: Could not allocate tx_skbuff\n", | |
743 | dev->name); | |
1da177e4 LT |
744 | err = -ENOMEM; |
745 | goto tx_skb_fail; | |
746 | } | |
747 | ||
748 | for (i = 0; i < priv->tx_ring_size; i++) | |
749 | priv->tx_skbuff[i] = NULL; | |
750 | ||
751 | priv->rx_skbuff = | |
752 | (struct sk_buff **) kmalloc(sizeof (struct sk_buff *) * | |
753 | priv->rx_ring_size, GFP_KERNEL); | |
754 | ||
bb40dcbb | 755 | if (NULL == priv->rx_skbuff) { |
0bbaf069 KG |
756 | if (netif_msg_ifup(priv)) |
757 | printk(KERN_ERR "%s: Could not allocate rx_skbuff\n", | |
758 | dev->name); | |
1da177e4 LT |
759 | err = -ENOMEM; |
760 | goto rx_skb_fail; | |
761 | } | |
762 | ||
763 | for (i = 0; i < priv->rx_ring_size; i++) | |
764 | priv->rx_skbuff[i] = NULL; | |
765 | ||
766 | /* Initialize some variables in our dev structure */ | |
767 | priv->dirty_tx = priv->cur_tx = priv->tx_bd_base; | |
768 | priv->cur_rx = priv->rx_bd_base; | |
769 | priv->skb_curtx = priv->skb_dirtytx = 0; | |
770 | priv->skb_currx = 0; | |
771 | ||
772 | /* Initialize Transmit Descriptor Ring */ | |
773 | txbdp = priv->tx_bd_base; | |
774 | for (i = 0; i < priv->tx_ring_size; i++) { | |
775 | txbdp->status = 0; | |
776 | txbdp->length = 0; | |
777 | txbdp->bufPtr = 0; | |
778 | txbdp++; | |
779 | } | |
780 | ||
781 | /* Set the last descriptor in the ring to indicate wrap */ | |
782 | txbdp--; | |
783 | txbdp->status |= TXBD_WRAP; | |
784 | ||
785 | rxbdp = priv->rx_bd_base; | |
786 | for (i = 0; i < priv->rx_ring_size; i++) { | |
815b97c6 | 787 | struct sk_buff *skb; |
1da177e4 | 788 | |
815b97c6 | 789 | skb = gfar_new_skb(dev); |
1da177e4 | 790 | |
815b97c6 AF |
791 | if (!skb) { |
792 | printk(KERN_ERR "%s: Can't allocate RX buffers\n", | |
793 | dev->name); | |
794 | ||
795 | goto err_rxalloc_fail; | |
796 | } | |
1da177e4 LT |
797 | |
798 | priv->rx_skbuff[i] = skb; | |
799 | ||
815b97c6 AF |
800 | gfar_new_rxbdp(dev, rxbdp, skb); |
801 | ||
1da177e4 LT |
802 | rxbdp++; |
803 | } | |
804 | ||
805 | /* Set the last descriptor in the ring to wrap */ | |
806 | rxbdp--; | |
807 | rxbdp->status |= RXBD_WRAP; | |
808 | ||
809 | /* If the device has multiple interrupts, register for | |
810 | * them. Otherwise, only register for the one */ | |
811 | if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) { | |
0bbaf069 | 812 | /* Install our interrupt handlers for Error, |
1da177e4 LT |
813 | * Transmit, and Receive */ |
814 | if (request_irq(priv->interruptError, gfar_error, | |
815 | 0, "enet_error", dev) < 0) { | |
0bbaf069 KG |
816 | if (netif_msg_intr(priv)) |
817 | printk(KERN_ERR "%s: Can't get IRQ %d\n", | |
818 | dev->name, priv->interruptError); | |
1da177e4 LT |
819 | |
820 | err = -1; | |
821 | goto err_irq_fail; | |
822 | } | |
823 | ||
824 | if (request_irq(priv->interruptTransmit, gfar_transmit, | |
825 | 0, "enet_tx", dev) < 0) { | |
0bbaf069 KG |
826 | if (netif_msg_intr(priv)) |
827 | printk(KERN_ERR "%s: Can't get IRQ %d\n", | |
828 | dev->name, priv->interruptTransmit); | |
1da177e4 LT |
829 | |
830 | err = -1; | |
831 | ||
832 | goto tx_irq_fail; | |
833 | } | |
834 | ||
835 | if (request_irq(priv->interruptReceive, gfar_receive, | |
836 | 0, "enet_rx", dev) < 0) { | |
0bbaf069 KG |
837 | if (netif_msg_intr(priv)) |
838 | printk(KERN_ERR "%s: Can't get IRQ %d (receive0)\n", | |
839 | dev->name, priv->interruptReceive); | |
1da177e4 LT |
840 | |
841 | err = -1; | |
842 | goto rx_irq_fail; | |
843 | } | |
844 | } else { | |
845 | if (request_irq(priv->interruptTransmit, gfar_interrupt, | |
846 | 0, "gfar_interrupt", dev) < 0) { | |
0bbaf069 KG |
847 | if (netif_msg_intr(priv)) |
848 | printk(KERN_ERR "%s: Can't get IRQ %d\n", | |
849 | dev->name, priv->interruptError); | |
1da177e4 LT |
850 | |
851 | err = -1; | |
852 | goto err_irq_fail; | |
853 | } | |
854 | } | |
855 | ||
bb40dcbb | 856 | phy_start(priv->phydev); |
1da177e4 LT |
857 | |
858 | /* Configure the coalescing support */ | |
859 | if (priv->txcoalescing) | |
860 | gfar_write(®s->txic, | |
861 | mk_ic_value(priv->txcount, priv->txtime)); | |
862 | else | |
863 | gfar_write(®s->txic, 0); | |
864 | ||
865 | if (priv->rxcoalescing) | |
866 | gfar_write(®s->rxic, | |
867 | mk_ic_value(priv->rxcount, priv->rxtime)); | |
868 | else | |
869 | gfar_write(®s->rxic, 0); | |
870 | ||
0bbaf069 KG |
871 | if (priv->rx_csum_enable) |
872 | rctrl |= RCTRL_CHECKSUMMING; | |
1da177e4 | 873 | |
7f7f5316 | 874 | if (priv->extended_hash) { |
0bbaf069 | 875 | rctrl |= RCTRL_EXTHASH; |
1da177e4 | 876 | |
7f7f5316 AF |
877 | gfar_clear_exact_match(dev); |
878 | rctrl |= RCTRL_EMEN; | |
879 | } | |
880 | ||
0bbaf069 KG |
881 | if (priv->vlan_enable) |
882 | rctrl |= RCTRL_VLAN; | |
1da177e4 | 883 | |
7f7f5316 AF |
884 | if (priv->padding) { |
885 | rctrl &= ~RCTRL_PAL_MASK; | |
886 | rctrl |= RCTRL_PADDING(priv->padding); | |
887 | } | |
888 | ||
0bbaf069 KG |
889 | /* Init rctrl based on our settings */ |
890 | gfar_write(&priv->regs->rctrl, rctrl); | |
1da177e4 | 891 | |
0bbaf069 KG |
892 | if (dev->features & NETIF_F_IP_CSUM) |
893 | gfar_write(&priv->regs->tctrl, TCTRL_INIT_CSUM); | |
1da177e4 | 894 | |
7f7f5316 AF |
895 | /* Set the extraction length and index */ |
896 | attrs = ATTRELI_EL(priv->rx_stash_size) | | |
897 | ATTRELI_EI(priv->rx_stash_index); | |
898 | ||
899 | gfar_write(&priv->regs->attreli, attrs); | |
900 | ||
901 | /* Start with defaults, and add stashing or locking | |
902 | * depending on the approprate variables */ | |
903 | attrs = ATTR_INIT_SETTINGS; | |
904 | ||
905 | if (priv->bd_stash_en) | |
906 | attrs |= ATTR_BDSTASH; | |
907 | ||
908 | if (priv->rx_stash_size != 0) | |
909 | attrs |= ATTR_BUFSTASH; | |
910 | ||
911 | gfar_write(&priv->regs->attr, attrs); | |
912 | ||
913 | gfar_write(&priv->regs->fifo_tx_thr, priv->fifo_threshold); | |
914 | gfar_write(&priv->regs->fifo_tx_starve, priv->fifo_starve); | |
915 | gfar_write(&priv->regs->fifo_tx_starve_shutoff, priv->fifo_starve_off); | |
916 | ||
917 | /* Start the controller */ | |
0bbaf069 | 918 | gfar_start(dev); |
1da177e4 LT |
919 | |
920 | return 0; | |
921 | ||
922 | rx_irq_fail: | |
923 | free_irq(priv->interruptTransmit, dev); | |
924 | tx_irq_fail: | |
925 | free_irq(priv->interruptError, dev); | |
926 | err_irq_fail: | |
815b97c6 | 927 | err_rxalloc_fail: |
1da177e4 LT |
928 | rx_skb_fail: |
929 | free_skb_resources(priv); | |
930 | tx_skb_fail: | |
cf782298 | 931 | dma_free_coherent(&dev->dev, |
1da177e4 LT |
932 | sizeof(struct txbd8)*priv->tx_ring_size |
933 | + sizeof(struct rxbd8)*priv->rx_ring_size, | |
934 | priv->tx_bd_base, | |
0bbaf069 | 935 | gfar_read(®s->tbase0)); |
1da177e4 | 936 | |
1da177e4 LT |
937 | return err; |
938 | } | |
939 | ||
940 | /* Called when something needs to use the ethernet device */ | |
941 | /* Returns 0 for success. */ | |
942 | static int gfar_enet_open(struct net_device *dev) | |
943 | { | |
293c8513 | 944 | #ifdef CONFIG_GFAR_NAPI |
94e8cc35 | 945 | struct gfar_private *priv = netdev_priv(dev); |
293c8513 | 946 | #endif |
1da177e4 LT |
947 | int err; |
948 | ||
293c8513 | 949 | #ifdef CONFIG_GFAR_NAPI |
bea3348e | 950 | napi_enable(&priv->napi); |
293c8513 | 951 | #endif |
bea3348e | 952 | |
1da177e4 LT |
953 | /* Initialize a bunch of registers */ |
954 | init_registers(dev); | |
955 | ||
956 | gfar_set_mac_address(dev); | |
957 | ||
958 | err = init_phy(dev); | |
959 | ||
bea3348e | 960 | if(err) { |
293c8513 | 961 | #ifdef CONFIG_GFAR_NAPI |
bea3348e | 962 | napi_disable(&priv->napi); |
293c8513 | 963 | #endif |
1da177e4 | 964 | return err; |
bea3348e | 965 | } |
1da177e4 LT |
966 | |
967 | err = startup_gfar(dev); | |
db0e8e3f | 968 | if (err) { |
293c8513 | 969 | #ifdef CONFIG_GFAR_NAPI |
bea3348e | 970 | napi_disable(&priv->napi); |
293c8513 | 971 | #endif |
db0e8e3f AV |
972 | return err; |
973 | } | |
1da177e4 LT |
974 | |
975 | netif_start_queue(dev); | |
976 | ||
977 | return err; | |
978 | } | |
979 | ||
7f7f5316 | 980 | static inline struct txfcb *gfar_add_fcb(struct sk_buff *skb, struct txbd8 *bdp) |
0bbaf069 KG |
981 | { |
982 | struct txfcb *fcb = (struct txfcb *)skb_push (skb, GMAC_FCB_LEN); | |
983 | ||
984 | memset(fcb, 0, GMAC_FCB_LEN); | |
985 | ||
0bbaf069 KG |
986 | return fcb; |
987 | } | |
988 | ||
989 | static inline void gfar_tx_checksum(struct sk_buff *skb, struct txfcb *fcb) | |
990 | { | |
7f7f5316 | 991 | u8 flags = 0; |
0bbaf069 KG |
992 | |
993 | /* If we're here, it's a IP packet with a TCP or UDP | |
994 | * payload. We set it to checksum, using a pseudo-header | |
995 | * we provide | |
996 | */ | |
7f7f5316 | 997 | flags = TXFCB_DEFAULT; |
0bbaf069 | 998 | |
7f7f5316 AF |
999 | /* Tell the controller what the protocol is */ |
1000 | /* And provide the already calculated phcs */ | |
eddc9ec5 | 1001 | if (ip_hdr(skb)->protocol == IPPROTO_UDP) { |
7f7f5316 | 1002 | flags |= TXFCB_UDP; |
4bedb452 | 1003 | fcb->phcs = udp_hdr(skb)->check; |
7f7f5316 | 1004 | } else |
8da32de5 | 1005 | fcb->phcs = tcp_hdr(skb)->check; |
0bbaf069 KG |
1006 | |
1007 | /* l3os is the distance between the start of the | |
1008 | * frame (skb->data) and the start of the IP hdr. | |
1009 | * l4os is the distance between the start of the | |
1010 | * l3 hdr and the l4 hdr */ | |
bbe735e4 | 1011 | fcb->l3os = (u16)(skb_network_offset(skb) - GMAC_FCB_LEN); |
cfe1fc77 | 1012 | fcb->l4os = skb_network_header_len(skb); |
0bbaf069 | 1013 | |
7f7f5316 | 1014 | fcb->flags = flags; |
0bbaf069 KG |
1015 | } |
1016 | ||
7f7f5316 | 1017 | void inline gfar_tx_vlan(struct sk_buff *skb, struct txfcb *fcb) |
0bbaf069 | 1018 | { |
7f7f5316 | 1019 | fcb->flags |= TXFCB_VLN; |
0bbaf069 KG |
1020 | fcb->vlctl = vlan_tx_tag_get(skb); |
1021 | } | |
1022 | ||
1da177e4 LT |
1023 | /* This is called by the kernel when a frame is ready for transmission. */ |
1024 | /* It is pointed to by the dev->hard_start_xmit function pointer */ | |
1025 | static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev) | |
1026 | { | |
1027 | struct gfar_private *priv = netdev_priv(dev); | |
0bbaf069 | 1028 | struct txfcb *fcb = NULL; |
1da177e4 | 1029 | struct txbd8 *txbdp; |
7f7f5316 | 1030 | u16 status; |
fef6108d | 1031 | unsigned long flags; |
1da177e4 LT |
1032 | |
1033 | /* Update transmit stats */ | |
09f75cd7 | 1034 | dev->stats.tx_bytes += skb->len; |
1da177e4 LT |
1035 | |
1036 | /* Lock priv now */ | |
fef6108d | 1037 | spin_lock_irqsave(&priv->txlock, flags); |
1da177e4 LT |
1038 | |
1039 | /* Point at the first free tx descriptor */ | |
1040 | txbdp = priv->cur_tx; | |
1041 | ||
1042 | /* Clear all but the WRAP status flags */ | |
7f7f5316 | 1043 | status = txbdp->status & TXBD_WRAP; |
1da177e4 | 1044 | |
0bbaf069 | 1045 | /* Set up checksumming */ |
7f7f5316 | 1046 | if (likely((dev->features & NETIF_F_IP_CSUM) |
84fa7933 | 1047 | && (CHECKSUM_PARTIAL == skb->ip_summed))) { |
0bbaf069 | 1048 | fcb = gfar_add_fcb(skb, txbdp); |
7f7f5316 | 1049 | status |= TXBD_TOE; |
0bbaf069 KG |
1050 | gfar_tx_checksum(skb, fcb); |
1051 | } | |
1052 | ||
1053 | if (priv->vlan_enable && | |
1054 | unlikely(priv->vlgrp && vlan_tx_tag_present(skb))) { | |
7f7f5316 | 1055 | if (unlikely(NULL == fcb)) { |
0bbaf069 | 1056 | fcb = gfar_add_fcb(skb, txbdp); |
7f7f5316 AF |
1057 | status |= TXBD_TOE; |
1058 | } | |
0bbaf069 KG |
1059 | |
1060 | gfar_tx_vlan(skb, fcb); | |
1061 | } | |
1062 | ||
1da177e4 LT |
1063 | /* Set buffer length and pointer */ |
1064 | txbdp->length = skb->len; | |
cf782298 | 1065 | txbdp->bufPtr = dma_map_single(&dev->dev, skb->data, |
1da177e4 LT |
1066 | skb->len, DMA_TO_DEVICE); |
1067 | ||
1068 | /* Save the skb pointer so we can free it later */ | |
1069 | priv->tx_skbuff[priv->skb_curtx] = skb; | |
1070 | ||
1071 | /* Update the current skb pointer (wrapping if this was the last) */ | |
1072 | priv->skb_curtx = | |
1073 | (priv->skb_curtx + 1) & TX_RING_MOD_MASK(priv->tx_ring_size); | |
1074 | ||
1075 | /* Flag the BD as interrupt-causing */ | |
7f7f5316 | 1076 | status |= TXBD_INTERRUPT; |
1da177e4 LT |
1077 | |
1078 | /* Flag the BD as ready to go, last in frame, and */ | |
1079 | /* in need of CRC */ | |
7f7f5316 | 1080 | status |= (TXBD_READY | TXBD_LAST | TXBD_CRC); |
1da177e4 LT |
1081 | |
1082 | dev->trans_start = jiffies; | |
1083 | ||
3b6330ce SW |
1084 | /* The powerpc-specific eieio() is used, as wmb() has too strong |
1085 | * semantics (it requires synchronization between cacheable and | |
1086 | * uncacheable mappings, which eieio doesn't provide and which we | |
1087 | * don't need), thus requiring a more expensive sync instruction. At | |
1088 | * some point, the set of architecture-independent barrier functions | |
1089 | * should be expanded to include weaker barriers. | |
1090 | */ | |
1091 | ||
1092 | eieio(); | |
7f7f5316 AF |
1093 | txbdp->status = status; |
1094 | ||
1da177e4 LT |
1095 | /* If this was the last BD in the ring, the next one */ |
1096 | /* is at the beginning of the ring */ | |
1097 | if (txbdp->status & TXBD_WRAP) | |
1098 | txbdp = priv->tx_bd_base; | |
1099 | else | |
1100 | txbdp++; | |
1101 | ||
1102 | /* If the next BD still needs to be cleaned up, then the bds | |
1103 | are full. We need to tell the kernel to stop sending us stuff. */ | |
1104 | if (txbdp == priv->dirty_tx) { | |
1105 | netif_stop_queue(dev); | |
1106 | ||
09f75cd7 | 1107 | dev->stats.tx_fifo_errors++; |
1da177e4 LT |
1108 | } |
1109 | ||
1110 | /* Update the current txbd to the next one */ | |
1111 | priv->cur_tx = txbdp; | |
1112 | ||
1113 | /* Tell the DMA to go go go */ | |
1114 | gfar_write(&priv->regs->tstat, TSTAT_CLEAR_THALT); | |
1115 | ||
1116 | /* Unlock priv */ | |
fef6108d | 1117 | spin_unlock_irqrestore(&priv->txlock, flags); |
1da177e4 LT |
1118 | |
1119 | return 0; | |
1120 | } | |
1121 | ||
1122 | /* Stops the kernel queue, and halts the controller */ | |
1123 | static int gfar_close(struct net_device *dev) | |
1124 | { | |
1125 | struct gfar_private *priv = netdev_priv(dev); | |
bea3348e | 1126 | |
293c8513 | 1127 | #ifdef CONFIG_GFAR_NAPI |
bea3348e | 1128 | napi_disable(&priv->napi); |
293c8513 | 1129 | #endif |
bea3348e | 1130 | |
1da177e4 LT |
1131 | stop_gfar(dev); |
1132 | ||
bb40dcbb AF |
1133 | /* Disconnect from the PHY */ |
1134 | phy_disconnect(priv->phydev); | |
1135 | priv->phydev = NULL; | |
1da177e4 LT |
1136 | |
1137 | netif_stop_queue(dev); | |
1138 | ||
1139 | return 0; | |
1140 | } | |
1141 | ||
1da177e4 LT |
1142 | /* Changes the mac address if the controller is not running. */ |
1143 | int gfar_set_mac_address(struct net_device *dev) | |
1144 | { | |
7f7f5316 | 1145 | gfar_set_mac_for_addr(dev, 0, dev->dev_addr); |
1da177e4 LT |
1146 | |
1147 | return 0; | |
1148 | } | |
1149 | ||
1150 | ||
0bbaf069 KG |
1151 | /* Enables and disables VLAN insertion/extraction */ |
1152 | static void gfar_vlan_rx_register(struct net_device *dev, | |
1153 | struct vlan_group *grp) | |
1154 | { | |
1155 | struct gfar_private *priv = netdev_priv(dev); | |
1156 | unsigned long flags; | |
1157 | u32 tempval; | |
1158 | ||
fef6108d | 1159 | spin_lock_irqsave(&priv->rxlock, flags); |
0bbaf069 KG |
1160 | |
1161 | priv->vlgrp = grp; | |
1162 | ||
1163 | if (grp) { | |
1164 | /* Enable VLAN tag insertion */ | |
1165 | tempval = gfar_read(&priv->regs->tctrl); | |
1166 | tempval |= TCTRL_VLINS; | |
1167 | ||
1168 | gfar_write(&priv->regs->tctrl, tempval); | |
6aa20a22 | 1169 | |
0bbaf069 KG |
1170 | /* Enable VLAN tag extraction */ |
1171 | tempval = gfar_read(&priv->regs->rctrl); | |
1172 | tempval |= RCTRL_VLEX; | |
1173 | gfar_write(&priv->regs->rctrl, tempval); | |
1174 | } else { | |
1175 | /* Disable VLAN tag insertion */ | |
1176 | tempval = gfar_read(&priv->regs->tctrl); | |
1177 | tempval &= ~TCTRL_VLINS; | |
1178 | gfar_write(&priv->regs->tctrl, tempval); | |
1179 | ||
1180 | /* Disable VLAN tag extraction */ | |
1181 | tempval = gfar_read(&priv->regs->rctrl); | |
1182 | tempval &= ~RCTRL_VLEX; | |
1183 | gfar_write(&priv->regs->rctrl, tempval); | |
1184 | } | |
1185 | ||
fef6108d | 1186 | spin_unlock_irqrestore(&priv->rxlock, flags); |
0bbaf069 KG |
1187 | } |
1188 | ||
1da177e4 LT |
1189 | static int gfar_change_mtu(struct net_device *dev, int new_mtu) |
1190 | { | |
1191 | int tempsize, tempval; | |
1192 | struct gfar_private *priv = netdev_priv(dev); | |
1193 | int oldsize = priv->rx_buffer_size; | |
0bbaf069 KG |
1194 | int frame_size = new_mtu + ETH_HLEN; |
1195 | ||
1196 | if (priv->vlan_enable) | |
faa89577 | 1197 | frame_size += VLAN_HLEN; |
0bbaf069 KG |
1198 | |
1199 | if (gfar_uses_fcb(priv)) | |
1200 | frame_size += GMAC_FCB_LEN; | |
1201 | ||
1202 | frame_size += priv->padding; | |
1da177e4 LT |
1203 | |
1204 | if ((frame_size < 64) || (frame_size > JUMBO_FRAME_SIZE)) { | |
0bbaf069 KG |
1205 | if (netif_msg_drv(priv)) |
1206 | printk(KERN_ERR "%s: Invalid MTU setting\n", | |
1207 | dev->name); | |
1da177e4 LT |
1208 | return -EINVAL; |
1209 | } | |
1210 | ||
1211 | tempsize = | |
1212 | (frame_size & ~(INCREMENTAL_BUFFER_SIZE - 1)) + | |
1213 | INCREMENTAL_BUFFER_SIZE; | |
1214 | ||
1215 | /* Only stop and start the controller if it isn't already | |
7f7f5316 | 1216 | * stopped, and we changed something */ |
1da177e4 LT |
1217 | if ((oldsize != tempsize) && (dev->flags & IFF_UP)) |
1218 | stop_gfar(dev); | |
1219 | ||
1220 | priv->rx_buffer_size = tempsize; | |
1221 | ||
1222 | dev->mtu = new_mtu; | |
1223 | ||
1224 | gfar_write(&priv->regs->mrblr, priv->rx_buffer_size); | |
1225 | gfar_write(&priv->regs->maxfrm, priv->rx_buffer_size); | |
1226 | ||
1227 | /* If the mtu is larger than the max size for standard | |
1228 | * ethernet frames (ie, a jumbo frame), then set maccfg2 | |
1229 | * to allow huge frames, and to check the length */ | |
1230 | tempval = gfar_read(&priv->regs->maccfg2); | |
1231 | ||
1232 | if (priv->rx_buffer_size > DEFAULT_RX_BUFFER_SIZE) | |
1233 | tempval |= (MACCFG2_HUGEFRAME | MACCFG2_LENGTHCHECK); | |
1234 | else | |
1235 | tempval &= ~(MACCFG2_HUGEFRAME | MACCFG2_LENGTHCHECK); | |
1236 | ||
1237 | gfar_write(&priv->regs->maccfg2, tempval); | |
1238 | ||
1239 | if ((oldsize != tempsize) && (dev->flags & IFF_UP)) | |
1240 | startup_gfar(dev); | |
1241 | ||
1242 | return 0; | |
1243 | } | |
1244 | ||
1245 | /* gfar_timeout gets called when a packet has not been | |
1246 | * transmitted after a set amount of time. | |
1247 | * For now, assume that clearing out all the structures, and | |
1248 | * starting over will fix the problem. */ | |
1249 | static void gfar_timeout(struct net_device *dev) | |
1250 | { | |
09f75cd7 | 1251 | dev->stats.tx_errors++; |
1da177e4 LT |
1252 | |
1253 | if (dev->flags & IFF_UP) { | |
1254 | stop_gfar(dev); | |
1255 | startup_gfar(dev); | |
1256 | } | |
1257 | ||
1258 | netif_schedule(dev); | |
1259 | } | |
1260 | ||
1261 | /* Interrupt Handler for Transmit complete */ | |
d080cd63 | 1262 | int gfar_clean_tx_ring(struct net_device *dev) |
1da177e4 | 1263 | { |
1da177e4 | 1264 | struct txbd8 *bdp; |
d080cd63 DH |
1265 | struct gfar_private *priv = netdev_priv(dev); |
1266 | int howmany = 0; | |
1da177e4 | 1267 | |
1da177e4 LT |
1268 | bdp = priv->dirty_tx; |
1269 | while ((bdp->status & TXBD_READY) == 0) { | |
1270 | /* If dirty_tx and cur_tx are the same, then either the */ | |
1271 | /* ring is empty or full now (it could only be full in the beginning, */ | |
1272 | /* obviously). If it is empty, we are done. */ | |
1273 | if ((bdp == priv->cur_tx) && (netif_queue_stopped(dev) == 0)) | |
1274 | break; | |
1275 | ||
d080cd63 | 1276 | howmany++; |
1da177e4 LT |
1277 | |
1278 | /* Deferred means some collisions occurred during transmit, */ | |
1279 | /* but we eventually sent the packet. */ | |
1280 | if (bdp->status & TXBD_DEF) | |
09f75cd7 | 1281 | dev->stats.collisions++; |
1da177e4 LT |
1282 | |
1283 | /* Free the sk buffer associated with this TxBD */ | |
1284 | dev_kfree_skb_irq(priv->tx_skbuff[priv->skb_dirtytx]); | |
d080cd63 | 1285 | |
1da177e4 LT |
1286 | priv->tx_skbuff[priv->skb_dirtytx] = NULL; |
1287 | priv->skb_dirtytx = | |
1288 | (priv->skb_dirtytx + | |
1289 | 1) & TX_RING_MOD_MASK(priv->tx_ring_size); | |
1290 | ||
d080cd63 DH |
1291 | /* Clean BD length for empty detection */ |
1292 | bdp->length = 0; | |
1293 | ||
1da177e4 LT |
1294 | /* update bdp to point at next bd in the ring (wrapping if necessary) */ |
1295 | if (bdp->status & TXBD_WRAP) | |
1296 | bdp = priv->tx_bd_base; | |
1297 | else | |
1298 | bdp++; | |
1299 | ||
1300 | /* Move dirty_tx to be the next bd */ | |
1301 | priv->dirty_tx = bdp; | |
1302 | ||
1303 | /* We freed a buffer, so now we can restart transmission */ | |
1304 | if (netif_queue_stopped(dev)) | |
1305 | netif_wake_queue(dev); | |
1306 | } /* while ((bdp->status & TXBD_READY) == 0) */ | |
1307 | ||
d080cd63 DH |
1308 | dev->stats.tx_packets += howmany; |
1309 | ||
1310 | return howmany; | |
1311 | } | |
1312 | ||
1313 | /* Interrupt Handler for Transmit complete */ | |
1314 | static irqreturn_t gfar_transmit(int irq, void *dev_id) | |
1315 | { | |
1316 | struct net_device *dev = (struct net_device *) dev_id; | |
1317 | struct gfar_private *priv = netdev_priv(dev); | |
1318 | ||
1319 | /* Clear IEVENT */ | |
1320 | gfar_write(&priv->regs->ievent, IEVENT_TX_MASK); | |
1321 | ||
1322 | /* Lock priv */ | |
1323 | spin_lock(&priv->txlock); | |
1324 | ||
1325 | gfar_clean_tx_ring(dev); | |
1326 | ||
1da177e4 LT |
1327 | /* If we are coalescing the interrupts, reset the timer */ |
1328 | /* Otherwise, clear it */ | |
2f448911 AF |
1329 | if (likely(priv->txcoalescing)) { |
1330 | gfar_write(&priv->regs->txic, 0); | |
1da177e4 LT |
1331 | gfar_write(&priv->regs->txic, |
1332 | mk_ic_value(priv->txcount, priv->txtime)); | |
2f448911 | 1333 | } |
1da177e4 | 1334 | |
fef6108d | 1335 | spin_unlock(&priv->txlock); |
1da177e4 LT |
1336 | |
1337 | return IRQ_HANDLED; | |
1338 | } | |
1339 | ||
815b97c6 AF |
1340 | static void gfar_new_rxbdp(struct net_device *dev, struct rxbd8 *bdp, |
1341 | struct sk_buff *skb) | |
1342 | { | |
1343 | struct gfar_private *priv = netdev_priv(dev); | |
1344 | u32 * status_len = (u32 *)bdp; | |
1345 | u16 flags; | |
1346 | ||
1347 | bdp->bufPtr = dma_map_single(&dev->dev, skb->data, | |
1348 | priv->rx_buffer_size, DMA_FROM_DEVICE); | |
1349 | ||
1350 | flags = RXBD_EMPTY | RXBD_INTERRUPT; | |
1351 | ||
1352 | if (bdp == priv->rx_bd_base + priv->rx_ring_size - 1) | |
1353 | flags |= RXBD_WRAP; | |
1354 | ||
1355 | eieio(); | |
1356 | ||
1357 | *status_len = (u32)flags << 16; | |
1358 | } | |
1359 | ||
1360 | ||
1361 | struct sk_buff * gfar_new_skb(struct net_device *dev) | |
1da177e4 | 1362 | { |
7f7f5316 | 1363 | unsigned int alignamount; |
1da177e4 LT |
1364 | struct gfar_private *priv = netdev_priv(dev); |
1365 | struct sk_buff *skb = NULL; | |
1da177e4 LT |
1366 | |
1367 | /* We have to allocate the skb, so keep trying till we succeed */ | |
815b97c6 | 1368 | skb = netdev_alloc_skb(dev, priv->rx_buffer_size + RXBUF_ALIGNMENT); |
1da177e4 | 1369 | |
815b97c6 | 1370 | if (!skb) |
1da177e4 LT |
1371 | return NULL; |
1372 | ||
7f7f5316 | 1373 | alignamount = RXBUF_ALIGNMENT - |
bea3348e | 1374 | (((unsigned long) skb->data) & (RXBUF_ALIGNMENT - 1)); |
7f7f5316 | 1375 | |
1da177e4 LT |
1376 | /* We need the data buffer to be aligned properly. We will reserve |
1377 | * as many bytes as needed to align the data properly | |
1378 | */ | |
7f7f5316 | 1379 | skb_reserve(skb, alignamount); |
1da177e4 | 1380 | |
1da177e4 LT |
1381 | return skb; |
1382 | } | |
1383 | ||
298e1a9e | 1384 | static inline void count_errors(unsigned short status, struct net_device *dev) |
1da177e4 | 1385 | { |
298e1a9e | 1386 | struct gfar_private *priv = netdev_priv(dev); |
09f75cd7 | 1387 | struct net_device_stats *stats = &dev->stats; |
1da177e4 LT |
1388 | struct gfar_extra_stats *estats = &priv->extra_stats; |
1389 | ||
1390 | /* If the packet was truncated, none of the other errors | |
1391 | * matter */ | |
1392 | if (status & RXBD_TRUNCATED) { | |
1393 | stats->rx_length_errors++; | |
1394 | ||
1395 | estats->rx_trunc++; | |
1396 | ||
1397 | return; | |
1398 | } | |
1399 | /* Count the errors, if there were any */ | |
1400 | if (status & (RXBD_LARGE | RXBD_SHORT)) { | |
1401 | stats->rx_length_errors++; | |
1402 | ||
1403 | if (status & RXBD_LARGE) | |
1404 | estats->rx_large++; | |
1405 | else | |
1406 | estats->rx_short++; | |
1407 | } | |
1408 | if (status & RXBD_NONOCTET) { | |
1409 | stats->rx_frame_errors++; | |
1410 | estats->rx_nonoctet++; | |
1411 | } | |
1412 | if (status & RXBD_CRCERR) { | |
1413 | estats->rx_crcerr++; | |
1414 | stats->rx_crc_errors++; | |
1415 | } | |
1416 | if (status & RXBD_OVERRUN) { | |
1417 | estats->rx_overrun++; | |
1418 | stats->rx_crc_errors++; | |
1419 | } | |
1420 | } | |
1421 | ||
7d12e780 | 1422 | irqreturn_t gfar_receive(int irq, void *dev_id) |
1da177e4 LT |
1423 | { |
1424 | struct net_device *dev = (struct net_device *) dev_id; | |
1425 | struct gfar_private *priv = netdev_priv(dev); | |
1da177e4 LT |
1426 | #ifdef CONFIG_GFAR_NAPI |
1427 | u32 tempval; | |
fef6108d AF |
1428 | #else |
1429 | unsigned long flags; | |
1da177e4 LT |
1430 | #endif |
1431 | ||
1da177e4 LT |
1432 | /* support NAPI */ |
1433 | #ifdef CONFIG_GFAR_NAPI | |
d080cd63 DH |
1434 | /* Clear IEVENT, so interrupts aren't called again |
1435 | * because of the packets that have already arrived */ | |
1436 | gfar_write(&priv->regs->ievent, IEVENT_RTX_MASK); | |
1437 | ||
bea3348e | 1438 | if (netif_rx_schedule_prep(dev, &priv->napi)) { |
1da177e4 | 1439 | tempval = gfar_read(&priv->regs->imask); |
d080cd63 | 1440 | tempval &= IMASK_RTX_DISABLED; |
1da177e4 LT |
1441 | gfar_write(&priv->regs->imask, tempval); |
1442 | ||
bea3348e | 1443 | __netif_rx_schedule(dev, &priv->napi); |
1da177e4 | 1444 | } else { |
0bbaf069 KG |
1445 | if (netif_msg_rx_err(priv)) |
1446 | printk(KERN_DEBUG "%s: receive called twice (%x)[%x]\n", | |
1447 | dev->name, gfar_read(&priv->regs->ievent), | |
1448 | gfar_read(&priv->regs->imask)); | |
1da177e4 LT |
1449 | } |
1450 | #else | |
d080cd63 DH |
1451 | /* Clear IEVENT, so rx interrupt isn't called again |
1452 | * because of this interrupt */ | |
1453 | gfar_write(&priv->regs->ievent, IEVENT_RX_MASK); | |
1da177e4 | 1454 | |
fef6108d | 1455 | spin_lock_irqsave(&priv->rxlock, flags); |
1da177e4 LT |
1456 | gfar_clean_rx_ring(dev, priv->rx_ring_size); |
1457 | ||
1458 | /* If we are coalescing interrupts, update the timer */ | |
1459 | /* Otherwise, clear it */ | |
2f448911 AF |
1460 | if (likely(priv->rxcoalescing)) { |
1461 | gfar_write(&priv->regs->rxic, 0); | |
1da177e4 LT |
1462 | gfar_write(&priv->regs->rxic, |
1463 | mk_ic_value(priv->rxcount, priv->rxtime)); | |
2f448911 | 1464 | } |
1da177e4 | 1465 | |
fef6108d | 1466 | spin_unlock_irqrestore(&priv->rxlock, flags); |
1da177e4 LT |
1467 | #endif |
1468 | ||
1469 | return IRQ_HANDLED; | |
1470 | } | |
1471 | ||
0bbaf069 KG |
1472 | static inline int gfar_rx_vlan(struct sk_buff *skb, |
1473 | struct vlan_group *vlgrp, unsigned short vlctl) | |
1474 | { | |
1475 | #ifdef CONFIG_GFAR_NAPI | |
1476 | return vlan_hwaccel_receive_skb(skb, vlgrp, vlctl); | |
1477 | #else | |
1478 | return vlan_hwaccel_rx(skb, vlgrp, vlctl); | |
1479 | #endif | |
1480 | } | |
1481 | ||
1482 | static inline void gfar_rx_checksum(struct sk_buff *skb, struct rxfcb *fcb) | |
1483 | { | |
1484 | /* If valid headers were found, and valid sums | |
1485 | * were verified, then we tell the kernel that no | |
1486 | * checksumming is necessary. Otherwise, it is */ | |
7f7f5316 | 1487 | if ((fcb->flags & RXFCB_CSUM_MASK) == (RXFCB_CIP | RXFCB_CTU)) |
0bbaf069 KG |
1488 | skb->ip_summed = CHECKSUM_UNNECESSARY; |
1489 | else | |
1490 | skb->ip_summed = CHECKSUM_NONE; | |
1491 | } | |
1492 | ||
1493 | ||
1494 | static inline struct rxfcb *gfar_get_fcb(struct sk_buff *skb) | |
1495 | { | |
1496 | struct rxfcb *fcb = (struct rxfcb *)skb->data; | |
1497 | ||
1498 | /* Remove the FCB from the skb */ | |
1499 | skb_pull(skb, GMAC_FCB_LEN); | |
1500 | ||
1501 | return fcb; | |
1502 | } | |
1da177e4 LT |
1503 | |
1504 | /* gfar_process_frame() -- handle one incoming packet if skb | |
1505 | * isn't NULL. */ | |
1506 | static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb, | |
1507 | int length) | |
1508 | { | |
1509 | struct gfar_private *priv = netdev_priv(dev); | |
0bbaf069 | 1510 | struct rxfcb *fcb = NULL; |
1da177e4 | 1511 | |
bb40dcbb | 1512 | if (NULL == skb) { |
0bbaf069 KG |
1513 | if (netif_msg_rx_err(priv)) |
1514 | printk(KERN_WARNING "%s: Missing skb!!.\n", dev->name); | |
09f75cd7 | 1515 | dev->stats.rx_dropped++; |
1da177e4 LT |
1516 | priv->extra_stats.rx_skbmissing++; |
1517 | } else { | |
0bbaf069 KG |
1518 | int ret; |
1519 | ||
1da177e4 LT |
1520 | /* Prep the skb for the packet */ |
1521 | skb_put(skb, length); | |
1522 | ||
0bbaf069 KG |
1523 | /* Grab the FCB if there is one */ |
1524 | if (gfar_uses_fcb(priv)) | |
1525 | fcb = gfar_get_fcb(skb); | |
1526 | ||
1527 | /* Remove the padded bytes, if there are any */ | |
1528 | if (priv->padding) | |
1529 | skb_pull(skb, priv->padding); | |
1530 | ||
1531 | if (priv->rx_csum_enable) | |
1532 | gfar_rx_checksum(skb, fcb); | |
1533 | ||
1da177e4 LT |
1534 | /* Tell the skb what kind of packet this is */ |
1535 | skb->protocol = eth_type_trans(skb, dev); | |
1536 | ||
1537 | /* Send the packet up the stack */ | |
7f7f5316 | 1538 | if (unlikely(priv->vlgrp && (fcb->flags & RXFCB_VLN))) |
0bbaf069 KG |
1539 | ret = gfar_rx_vlan(skb, priv->vlgrp, fcb->vlctl); |
1540 | else | |
1541 | ret = RECEIVE(skb); | |
1542 | ||
1543 | if (NET_RX_DROP == ret) | |
1da177e4 | 1544 | priv->extra_stats.kernel_dropped++; |
1da177e4 LT |
1545 | } |
1546 | ||
1547 | return 0; | |
1548 | } | |
1549 | ||
1550 | /* gfar_clean_rx_ring() -- Processes each frame in the rx ring | |
0bbaf069 | 1551 | * until the budget/quota has been reached. Returns the number |
1da177e4 LT |
1552 | * of frames handled |
1553 | */ | |
0bbaf069 | 1554 | int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit) |
1da177e4 LT |
1555 | { |
1556 | struct rxbd8 *bdp; | |
1557 | struct sk_buff *skb; | |
1558 | u16 pkt_len; | |
1559 | int howmany = 0; | |
1560 | struct gfar_private *priv = netdev_priv(dev); | |
1561 | ||
1562 | /* Get the first full descriptor */ | |
1563 | bdp = priv->cur_rx; | |
1564 | ||
1565 | while (!((bdp->status & RXBD_EMPTY) || (--rx_work_limit < 0))) { | |
815b97c6 | 1566 | struct sk_buff *newskb; |
3b6330ce | 1567 | rmb(); |
815b97c6 AF |
1568 | |
1569 | /* Add another skb for the future */ | |
1570 | newskb = gfar_new_skb(dev); | |
1571 | ||
1da177e4 LT |
1572 | skb = priv->rx_skbuff[priv->skb_currx]; |
1573 | ||
815b97c6 AF |
1574 | /* We drop the frame if we failed to allocate a new buffer */ |
1575 | if (unlikely(!newskb || !(bdp->status & RXBD_LAST) || | |
1576 | bdp->status & RXBD_ERR)) { | |
1577 | count_errors(bdp->status, dev); | |
1578 | ||
1579 | if (unlikely(!newskb)) | |
1580 | newskb = skb; | |
1581 | ||
1582 | if (skb) { | |
1583 | dma_unmap_single(&priv->dev->dev, | |
1584 | bdp->bufPtr, | |
1585 | priv->rx_buffer_size, | |
1586 | DMA_FROM_DEVICE); | |
1587 | ||
1588 | dev_kfree_skb_any(skb); | |
1589 | } | |
1590 | } else { | |
1da177e4 | 1591 | /* Increment the number of packets */ |
09f75cd7 | 1592 | dev->stats.rx_packets++; |
1da177e4 LT |
1593 | howmany++; |
1594 | ||
1595 | /* Remove the FCS from the packet length */ | |
1596 | pkt_len = bdp->length - 4; | |
1597 | ||
1598 | gfar_process_frame(dev, skb, pkt_len); | |
1599 | ||
09f75cd7 | 1600 | dev->stats.rx_bytes += pkt_len; |
1da177e4 LT |
1601 | } |
1602 | ||
1603 | dev->last_rx = jiffies; | |
1604 | ||
815b97c6 | 1605 | priv->rx_skbuff[priv->skb_currx] = newskb; |
1da177e4 | 1606 | |
815b97c6 AF |
1607 | /* Setup the new bdp */ |
1608 | gfar_new_rxbdp(dev, bdp, newskb); | |
1da177e4 LT |
1609 | |
1610 | /* Update to the next pointer */ | |
1611 | if (bdp->status & RXBD_WRAP) | |
1612 | bdp = priv->rx_bd_base; | |
1613 | else | |
1614 | bdp++; | |
1615 | ||
1616 | /* update to point at the next skb */ | |
1617 | priv->skb_currx = | |
815b97c6 AF |
1618 | (priv->skb_currx + 1) & |
1619 | RX_RING_MOD_MASK(priv->rx_ring_size); | |
1da177e4 LT |
1620 | } |
1621 | ||
1622 | /* Update the current rxbd pointer to be the next one */ | |
1623 | priv->cur_rx = bdp; | |
1624 | ||
1da177e4 LT |
1625 | return howmany; |
1626 | } | |
1627 | ||
1628 | #ifdef CONFIG_GFAR_NAPI | |
bea3348e | 1629 | static int gfar_poll(struct napi_struct *napi, int budget) |
1da177e4 | 1630 | { |
bea3348e SH |
1631 | struct gfar_private *priv = container_of(napi, struct gfar_private, napi); |
1632 | struct net_device *dev = priv->dev; | |
1da177e4 | 1633 | int howmany; |
d080cd63 DH |
1634 | unsigned long flags; |
1635 | ||
1636 | /* If we fail to get the lock, don't bother with the TX BDs */ | |
1637 | if (spin_trylock_irqsave(&priv->txlock, flags)) { | |
1638 | gfar_clean_tx_ring(dev); | |
1639 | spin_unlock_irqrestore(&priv->txlock, flags); | |
1640 | } | |
1da177e4 | 1641 | |
bea3348e | 1642 | howmany = gfar_clean_rx_ring(dev, budget); |
1da177e4 | 1643 | |
bea3348e SH |
1644 | if (howmany < budget) { |
1645 | netif_rx_complete(dev, napi); | |
1da177e4 LT |
1646 | |
1647 | /* Clear the halt bit in RSTAT */ | |
1648 | gfar_write(&priv->regs->rstat, RSTAT_CLEAR_RHALT); | |
1649 | ||
1650 | gfar_write(&priv->regs->imask, IMASK_DEFAULT); | |
1651 | ||
1652 | /* If we are coalescing interrupts, update the timer */ | |
1653 | /* Otherwise, clear it */ | |
2f448911 AF |
1654 | if (likely(priv->rxcoalescing)) { |
1655 | gfar_write(&priv->regs->rxic, 0); | |
1da177e4 LT |
1656 | gfar_write(&priv->regs->rxic, |
1657 | mk_ic_value(priv->rxcount, priv->rxtime)); | |
2f448911 | 1658 | } |
1da177e4 LT |
1659 | } |
1660 | ||
bea3348e | 1661 | return howmany; |
1da177e4 LT |
1662 | } |
1663 | #endif | |
1664 | ||
f2d71c2d VW |
1665 | #ifdef CONFIG_NET_POLL_CONTROLLER |
1666 | /* | |
1667 | * Polling 'interrupt' - used by things like netconsole to send skbs | |
1668 | * without having to re-enable interrupts. It's not called while | |
1669 | * the interrupt routine is executing. | |
1670 | */ | |
1671 | static void gfar_netpoll(struct net_device *dev) | |
1672 | { | |
1673 | struct gfar_private *priv = netdev_priv(dev); | |
1674 | ||
1675 | /* If the device has multiple interrupts, run tx/rx */ | |
1676 | if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) { | |
1677 | disable_irq(priv->interruptTransmit); | |
1678 | disable_irq(priv->interruptReceive); | |
1679 | disable_irq(priv->interruptError); | |
1680 | gfar_interrupt(priv->interruptTransmit, dev); | |
1681 | enable_irq(priv->interruptError); | |
1682 | enable_irq(priv->interruptReceive); | |
1683 | enable_irq(priv->interruptTransmit); | |
1684 | } else { | |
1685 | disable_irq(priv->interruptTransmit); | |
1686 | gfar_interrupt(priv->interruptTransmit, dev); | |
1687 | enable_irq(priv->interruptTransmit); | |
1688 | } | |
1689 | } | |
1690 | #endif | |
1691 | ||
1da177e4 | 1692 | /* The interrupt handler for devices with one interrupt */ |
7d12e780 | 1693 | static irqreturn_t gfar_interrupt(int irq, void *dev_id) |
1da177e4 LT |
1694 | { |
1695 | struct net_device *dev = dev_id; | |
1696 | struct gfar_private *priv = netdev_priv(dev); | |
1697 | ||
1698 | /* Save ievent for future reference */ | |
1699 | u32 events = gfar_read(&priv->regs->ievent); | |
1700 | ||
1da177e4 | 1701 | /* Check for reception */ |
538cc7ee | 1702 | if (events & IEVENT_RX_MASK) |
7d12e780 | 1703 | gfar_receive(irq, dev_id); |
1da177e4 LT |
1704 | |
1705 | /* Check for transmit completion */ | |
538cc7ee | 1706 | if (events & IEVENT_TX_MASK) |
7d12e780 | 1707 | gfar_transmit(irq, dev_id); |
1da177e4 | 1708 | |
538cc7ee SS |
1709 | /* Check for errors */ |
1710 | if (events & IEVENT_ERR_MASK) | |
1711 | gfar_error(irq, dev_id); | |
1da177e4 LT |
1712 | |
1713 | return IRQ_HANDLED; | |
1714 | } | |
1715 | ||
1da177e4 LT |
1716 | /* Called every time the controller might need to be made |
1717 | * aware of new link state. The PHY code conveys this | |
bb40dcbb | 1718 | * information through variables in the phydev structure, and this |
1da177e4 LT |
1719 | * function converts those variables into the appropriate |
1720 | * register values, and can bring down the device if needed. | |
1721 | */ | |
1722 | static void adjust_link(struct net_device *dev) | |
1723 | { | |
1724 | struct gfar_private *priv = netdev_priv(dev); | |
cc8c6e37 | 1725 | struct gfar __iomem *regs = priv->regs; |
bb40dcbb AF |
1726 | unsigned long flags; |
1727 | struct phy_device *phydev = priv->phydev; | |
1728 | int new_state = 0; | |
1729 | ||
fef6108d | 1730 | spin_lock_irqsave(&priv->txlock, flags); |
bb40dcbb AF |
1731 | if (phydev->link) { |
1732 | u32 tempval = gfar_read(®s->maccfg2); | |
7f7f5316 | 1733 | u32 ecntrl = gfar_read(®s->ecntrl); |
1da177e4 | 1734 | |
1da177e4 LT |
1735 | /* Now we make sure that we can be in full duplex mode. |
1736 | * If not, we operate in half-duplex mode. */ | |
bb40dcbb AF |
1737 | if (phydev->duplex != priv->oldduplex) { |
1738 | new_state = 1; | |
1739 | if (!(phydev->duplex)) | |
1da177e4 | 1740 | tempval &= ~(MACCFG2_FULL_DUPLEX); |
bb40dcbb | 1741 | else |
1da177e4 | 1742 | tempval |= MACCFG2_FULL_DUPLEX; |
1da177e4 | 1743 | |
bb40dcbb | 1744 | priv->oldduplex = phydev->duplex; |
1da177e4 LT |
1745 | } |
1746 | ||
bb40dcbb AF |
1747 | if (phydev->speed != priv->oldspeed) { |
1748 | new_state = 1; | |
1749 | switch (phydev->speed) { | |
1da177e4 | 1750 | case 1000: |
1da177e4 LT |
1751 | tempval = |
1752 | ((tempval & ~(MACCFG2_IF)) | MACCFG2_GMII); | |
1da177e4 LT |
1753 | break; |
1754 | case 100: | |
1755 | case 10: | |
1da177e4 LT |
1756 | tempval = |
1757 | ((tempval & ~(MACCFG2_IF)) | MACCFG2_MII); | |
7f7f5316 AF |
1758 | |
1759 | /* Reduced mode distinguishes | |
1760 | * between 10 and 100 */ | |
1761 | if (phydev->speed == SPEED_100) | |
1762 | ecntrl |= ECNTRL_R100; | |
1763 | else | |
1764 | ecntrl &= ~(ECNTRL_R100); | |
1da177e4 LT |
1765 | break; |
1766 | default: | |
0bbaf069 KG |
1767 | if (netif_msg_link(priv)) |
1768 | printk(KERN_WARNING | |
bb40dcbb AF |
1769 | "%s: Ack! Speed (%d) is not 10/100/1000!\n", |
1770 | dev->name, phydev->speed); | |
1da177e4 LT |
1771 | break; |
1772 | } | |
1773 | ||
bb40dcbb | 1774 | priv->oldspeed = phydev->speed; |
1da177e4 LT |
1775 | } |
1776 | ||
bb40dcbb | 1777 | gfar_write(®s->maccfg2, tempval); |
7f7f5316 | 1778 | gfar_write(®s->ecntrl, ecntrl); |
bb40dcbb | 1779 | |
1da177e4 | 1780 | if (!priv->oldlink) { |
bb40dcbb | 1781 | new_state = 1; |
1da177e4 | 1782 | priv->oldlink = 1; |
1da177e4 LT |
1783 | netif_schedule(dev); |
1784 | } | |
bb40dcbb AF |
1785 | } else if (priv->oldlink) { |
1786 | new_state = 1; | |
1787 | priv->oldlink = 0; | |
1788 | priv->oldspeed = 0; | |
1789 | priv->oldduplex = -1; | |
1da177e4 | 1790 | } |
1da177e4 | 1791 | |
bb40dcbb AF |
1792 | if (new_state && netif_msg_link(priv)) |
1793 | phy_print_status(phydev); | |
1794 | ||
fef6108d | 1795 | spin_unlock_irqrestore(&priv->txlock, flags); |
bb40dcbb | 1796 | } |
1da177e4 LT |
1797 | |
1798 | /* Update the hash table based on the current list of multicast | |
1799 | * addresses we subscribe to. Also, change the promiscuity of | |
1800 | * the device based on the flags (this function is called | |
1801 | * whenever dev->flags is changed */ | |
1802 | static void gfar_set_multi(struct net_device *dev) | |
1803 | { | |
1804 | struct dev_mc_list *mc_ptr; | |
1805 | struct gfar_private *priv = netdev_priv(dev); | |
cc8c6e37 | 1806 | struct gfar __iomem *regs = priv->regs; |
1da177e4 LT |
1807 | u32 tempval; |
1808 | ||
1809 | if(dev->flags & IFF_PROMISC) { | |
1da177e4 LT |
1810 | /* Set RCTRL to PROM */ |
1811 | tempval = gfar_read(®s->rctrl); | |
1812 | tempval |= RCTRL_PROM; | |
1813 | gfar_write(®s->rctrl, tempval); | |
1814 | } else { | |
1815 | /* Set RCTRL to not PROM */ | |
1816 | tempval = gfar_read(®s->rctrl); | |
1817 | tempval &= ~(RCTRL_PROM); | |
1818 | gfar_write(®s->rctrl, tempval); | |
1819 | } | |
6aa20a22 | 1820 | |
1da177e4 LT |
1821 | if(dev->flags & IFF_ALLMULTI) { |
1822 | /* Set the hash to rx all multicast frames */ | |
0bbaf069 KG |
1823 | gfar_write(®s->igaddr0, 0xffffffff); |
1824 | gfar_write(®s->igaddr1, 0xffffffff); | |
1825 | gfar_write(®s->igaddr2, 0xffffffff); | |
1826 | gfar_write(®s->igaddr3, 0xffffffff); | |
1827 | gfar_write(®s->igaddr4, 0xffffffff); | |
1828 | gfar_write(®s->igaddr5, 0xffffffff); | |
1829 | gfar_write(®s->igaddr6, 0xffffffff); | |
1830 | gfar_write(®s->igaddr7, 0xffffffff); | |
1da177e4 LT |
1831 | gfar_write(®s->gaddr0, 0xffffffff); |
1832 | gfar_write(®s->gaddr1, 0xffffffff); | |
1833 | gfar_write(®s->gaddr2, 0xffffffff); | |
1834 | gfar_write(®s->gaddr3, 0xffffffff); | |
1835 | gfar_write(®s->gaddr4, 0xffffffff); | |
1836 | gfar_write(®s->gaddr5, 0xffffffff); | |
1837 | gfar_write(®s->gaddr6, 0xffffffff); | |
1838 | gfar_write(®s->gaddr7, 0xffffffff); | |
1839 | } else { | |
7f7f5316 AF |
1840 | int em_num; |
1841 | int idx; | |
1842 | ||
1da177e4 | 1843 | /* zero out the hash */ |
0bbaf069 KG |
1844 | gfar_write(®s->igaddr0, 0x0); |
1845 | gfar_write(®s->igaddr1, 0x0); | |
1846 | gfar_write(®s->igaddr2, 0x0); | |
1847 | gfar_write(®s->igaddr3, 0x0); | |
1848 | gfar_write(®s->igaddr4, 0x0); | |
1849 | gfar_write(®s->igaddr5, 0x0); | |
1850 | gfar_write(®s->igaddr6, 0x0); | |
1851 | gfar_write(®s->igaddr7, 0x0); | |
1da177e4 LT |
1852 | gfar_write(®s->gaddr0, 0x0); |
1853 | gfar_write(®s->gaddr1, 0x0); | |
1854 | gfar_write(®s->gaddr2, 0x0); | |
1855 | gfar_write(®s->gaddr3, 0x0); | |
1856 | gfar_write(®s->gaddr4, 0x0); | |
1857 | gfar_write(®s->gaddr5, 0x0); | |
1858 | gfar_write(®s->gaddr6, 0x0); | |
1859 | gfar_write(®s->gaddr7, 0x0); | |
1860 | ||
7f7f5316 AF |
1861 | /* If we have extended hash tables, we need to |
1862 | * clear the exact match registers to prepare for | |
1863 | * setting them */ | |
1864 | if (priv->extended_hash) { | |
1865 | em_num = GFAR_EM_NUM + 1; | |
1866 | gfar_clear_exact_match(dev); | |
1867 | idx = 1; | |
1868 | } else { | |
1869 | idx = 0; | |
1870 | em_num = 0; | |
1871 | } | |
1872 | ||
1da177e4 LT |
1873 | if(dev->mc_count == 0) |
1874 | return; | |
1875 | ||
1876 | /* Parse the list, and set the appropriate bits */ | |
1877 | for(mc_ptr = dev->mc_list; mc_ptr; mc_ptr = mc_ptr->next) { | |
7f7f5316 AF |
1878 | if (idx < em_num) { |
1879 | gfar_set_mac_for_addr(dev, idx, | |
1880 | mc_ptr->dmi_addr); | |
1881 | idx++; | |
1882 | } else | |
1883 | gfar_set_hash_for_addr(dev, mc_ptr->dmi_addr); | |
1da177e4 LT |
1884 | } |
1885 | } | |
1886 | ||
1887 | return; | |
1888 | } | |
1889 | ||
7f7f5316 AF |
1890 | |
1891 | /* Clears each of the exact match registers to zero, so they | |
1892 | * don't interfere with normal reception */ | |
1893 | static void gfar_clear_exact_match(struct net_device *dev) | |
1894 | { | |
1895 | int idx; | |
1896 | u8 zero_arr[MAC_ADDR_LEN] = {0,0,0,0,0,0}; | |
1897 | ||
1898 | for(idx = 1;idx < GFAR_EM_NUM + 1;idx++) | |
1899 | gfar_set_mac_for_addr(dev, idx, (u8 *)zero_arr); | |
1900 | } | |
1901 | ||
1da177e4 LT |
1902 | /* Set the appropriate hash bit for the given addr */ |
1903 | /* The algorithm works like so: | |
1904 | * 1) Take the Destination Address (ie the multicast address), and | |
1905 | * do a CRC on it (little endian), and reverse the bits of the | |
1906 | * result. | |
1907 | * 2) Use the 8 most significant bits as a hash into a 256-entry | |
1908 | * table. The table is controlled through 8 32-bit registers: | |
1909 | * gaddr0-7. gaddr0's MSB is entry 0, and gaddr7's LSB is | |
1910 | * gaddr7. This means that the 3 most significant bits in the | |
1911 | * hash index which gaddr register to use, and the 5 other bits | |
1912 | * indicate which bit (assuming an IBM numbering scheme, which | |
1913 | * for PowerPC (tm) is usually the case) in the register holds | |
1914 | * the entry. */ | |
1915 | static void gfar_set_hash_for_addr(struct net_device *dev, u8 *addr) | |
1916 | { | |
1917 | u32 tempval; | |
1918 | struct gfar_private *priv = netdev_priv(dev); | |
1da177e4 | 1919 | u32 result = ether_crc(MAC_ADDR_LEN, addr); |
0bbaf069 KG |
1920 | int width = priv->hash_width; |
1921 | u8 whichbit = (result >> (32 - width)) & 0x1f; | |
1922 | u8 whichreg = result >> (32 - width + 5); | |
1da177e4 LT |
1923 | u32 value = (1 << (31-whichbit)); |
1924 | ||
0bbaf069 | 1925 | tempval = gfar_read(priv->hash_regs[whichreg]); |
1da177e4 | 1926 | tempval |= value; |
0bbaf069 | 1927 | gfar_write(priv->hash_regs[whichreg], tempval); |
1da177e4 LT |
1928 | |
1929 | return; | |
1930 | } | |
1931 | ||
7f7f5316 AF |
1932 | |
1933 | /* There are multiple MAC Address register pairs on some controllers | |
1934 | * This function sets the numth pair to a given address | |
1935 | */ | |
1936 | static void gfar_set_mac_for_addr(struct net_device *dev, int num, u8 *addr) | |
1937 | { | |
1938 | struct gfar_private *priv = netdev_priv(dev); | |
1939 | int idx; | |
1940 | char tmpbuf[MAC_ADDR_LEN]; | |
1941 | u32 tempval; | |
cc8c6e37 | 1942 | u32 __iomem *macptr = &priv->regs->macstnaddr1; |
7f7f5316 AF |
1943 | |
1944 | macptr += num*2; | |
1945 | ||
1946 | /* Now copy it into the mac registers backwards, cuz */ | |
1947 | /* little endian is silly */ | |
1948 | for (idx = 0; idx < MAC_ADDR_LEN; idx++) | |
1949 | tmpbuf[MAC_ADDR_LEN - 1 - idx] = addr[idx]; | |
1950 | ||
1951 | gfar_write(macptr, *((u32 *) (tmpbuf))); | |
1952 | ||
1953 | tempval = *((u32 *) (tmpbuf + 4)); | |
1954 | ||
1955 | gfar_write(macptr+1, tempval); | |
1956 | } | |
1957 | ||
1da177e4 | 1958 | /* GFAR error interrupt handler */ |
7d12e780 | 1959 | static irqreturn_t gfar_error(int irq, void *dev_id) |
1da177e4 LT |
1960 | { |
1961 | struct net_device *dev = dev_id; | |
1962 | struct gfar_private *priv = netdev_priv(dev); | |
1963 | ||
1964 | /* Save ievent for future reference */ | |
1965 | u32 events = gfar_read(&priv->regs->ievent); | |
1966 | ||
1967 | /* Clear IEVENT */ | |
1968 | gfar_write(&priv->regs->ievent, IEVENT_ERR_MASK); | |
1969 | ||
1970 | /* Hmm... */ | |
0bbaf069 KG |
1971 | if (netif_msg_rx_err(priv) || netif_msg_tx_err(priv)) |
1972 | printk(KERN_DEBUG "%s: error interrupt (ievent=0x%08x imask=0x%08x)\n", | |
538cc7ee | 1973 | dev->name, events, gfar_read(&priv->regs->imask)); |
1da177e4 LT |
1974 | |
1975 | /* Update the error counters */ | |
1976 | if (events & IEVENT_TXE) { | |
09f75cd7 | 1977 | dev->stats.tx_errors++; |
1da177e4 LT |
1978 | |
1979 | if (events & IEVENT_LC) | |
09f75cd7 | 1980 | dev->stats.tx_window_errors++; |
1da177e4 | 1981 | if (events & IEVENT_CRL) |
09f75cd7 | 1982 | dev->stats.tx_aborted_errors++; |
1da177e4 | 1983 | if (events & IEVENT_XFUN) { |
0bbaf069 | 1984 | if (netif_msg_tx_err(priv)) |
538cc7ee SS |
1985 | printk(KERN_DEBUG "%s: TX FIFO underrun, " |
1986 | "packet dropped.\n", dev->name); | |
09f75cd7 | 1987 | dev->stats.tx_dropped++; |
1da177e4 LT |
1988 | priv->extra_stats.tx_underrun++; |
1989 | ||
1990 | /* Reactivate the Tx Queues */ | |
1991 | gfar_write(&priv->regs->tstat, TSTAT_CLEAR_THALT); | |
1992 | } | |
0bbaf069 KG |
1993 | if (netif_msg_tx_err(priv)) |
1994 | printk(KERN_DEBUG "%s: Transmit Error\n", dev->name); | |
1da177e4 LT |
1995 | } |
1996 | if (events & IEVENT_BSY) { | |
09f75cd7 | 1997 | dev->stats.rx_errors++; |
1da177e4 LT |
1998 | priv->extra_stats.rx_bsy++; |
1999 | ||
7d12e780 | 2000 | gfar_receive(irq, dev_id); |
1da177e4 LT |
2001 | |
2002 | #ifndef CONFIG_GFAR_NAPI | |
2003 | /* Clear the halt bit in RSTAT */ | |
2004 | gfar_write(&priv->regs->rstat, RSTAT_CLEAR_RHALT); | |
2005 | #endif | |
2006 | ||
0bbaf069 | 2007 | if (netif_msg_rx_err(priv)) |
538cc7ee SS |
2008 | printk(KERN_DEBUG "%s: busy error (rstat: %x)\n", |
2009 | dev->name, gfar_read(&priv->regs->rstat)); | |
1da177e4 LT |
2010 | } |
2011 | if (events & IEVENT_BABR) { | |
09f75cd7 | 2012 | dev->stats.rx_errors++; |
1da177e4 LT |
2013 | priv->extra_stats.rx_babr++; |
2014 | ||
0bbaf069 | 2015 | if (netif_msg_rx_err(priv)) |
538cc7ee | 2016 | printk(KERN_DEBUG "%s: babbling RX error\n", dev->name); |
1da177e4 LT |
2017 | } |
2018 | if (events & IEVENT_EBERR) { | |
2019 | priv->extra_stats.eberr++; | |
0bbaf069 | 2020 | if (netif_msg_rx_err(priv)) |
538cc7ee | 2021 | printk(KERN_DEBUG "%s: bus error\n", dev->name); |
1da177e4 | 2022 | } |
0bbaf069 | 2023 | if ((events & IEVENT_RXC) && netif_msg_rx_status(priv)) |
538cc7ee | 2024 | printk(KERN_DEBUG "%s: control frame\n", dev->name); |
1da177e4 LT |
2025 | |
2026 | if (events & IEVENT_BABT) { | |
2027 | priv->extra_stats.tx_babt++; | |
0bbaf069 | 2028 | if (netif_msg_tx_err(priv)) |
538cc7ee | 2029 | printk(KERN_DEBUG "%s: babbling TX error\n", dev->name); |
1da177e4 LT |
2030 | } |
2031 | return IRQ_HANDLED; | |
2032 | } | |
2033 | ||
72abb461 KS |
2034 | /* work with hotplug and coldplug */ |
2035 | MODULE_ALIAS("platform:fsl-gianfar"); | |
2036 | ||
1da177e4 | 2037 | /* Structure for a device driver */ |
3ae5eaec | 2038 | static struct platform_driver gfar_driver = { |
1da177e4 LT |
2039 | .probe = gfar_probe, |
2040 | .remove = gfar_remove, | |
3ae5eaec RK |
2041 | .driver = { |
2042 | .name = "fsl-gianfar", | |
72abb461 | 2043 | .owner = THIS_MODULE, |
3ae5eaec | 2044 | }, |
1da177e4 LT |
2045 | }; |
2046 | ||
2047 | static int __init gfar_init(void) | |
2048 | { | |
bb40dcbb AF |
2049 | int err = gfar_mdio_init(); |
2050 | ||
2051 | if (err) | |
2052 | return err; | |
2053 | ||
3ae5eaec | 2054 | err = platform_driver_register(&gfar_driver); |
bb40dcbb AF |
2055 | |
2056 | if (err) | |
2057 | gfar_mdio_exit(); | |
6aa20a22 | 2058 | |
bb40dcbb | 2059 | return err; |
1da177e4 LT |
2060 | } |
2061 | ||
2062 | static void __exit gfar_exit(void) | |
2063 | { | |
3ae5eaec | 2064 | platform_driver_unregister(&gfar_driver); |
bb40dcbb | 2065 | gfar_mdio_exit(); |
1da177e4 LT |
2066 | } |
2067 | ||
2068 | module_init(gfar_init); | |
2069 | module_exit(gfar_exit); | |
2070 |