[deliverable/linux.git] / drivers / net / irda / act200l-sir.c

/*********************************************************************
 *
 * Filename:      act200l.c
 * Version:       0.8
 * Description:   Implementation for the ACTiSYS ACT-IR200L dongle
 * Status:        Experimental.
 * Author:        SHIMIZU Takuya <tshimizu@ga2.so-net.ne.jp>
 * Created at:    Fri Aug  3 17:35:42 2001
 * Modified at:   Fri Aug 17 10:22:40 2001
 * Modified by:   SHIMIZU Takuya <tshimizu@ga2.so-net.ne.jp>
 *
 *     Copyright (c) 2001 SHIMIZU Takuya, All Rights Reserved.
 *
 *     This program is free software; you can redistribute it and/or
 *     modify it under the terms of the GNU General Public License as
 *     published by the Free Software Foundation; either version 2 of
 *     the License, or (at your option) any later version.
 *
 ********************************************************************/

#include <linux/module.h>
#include <linux/delay.h>
#include <linux/init.h>

#include <net/irda/irda.h>

#include "sir-dev.h"

static int act200l_reset(struct sir_dev *dev);
static int act200l_open(struct sir_dev *dev);
static int act200l_close(struct sir_dev *dev);
static int act200l_change_speed(struct sir_dev *dev, unsigned speed);

/* Regsiter 0: Control register #1 */
#define ACT200L_REG0    0x00
#define ACT200L_TXEN    0x01 /* Enable transmitter */
#define ACT200L_RXEN    0x02 /* Enable receiver */

/* Register 1: Control register #2 */
#define ACT200L_REG1    0x10
#define ACT200L_LODB    0x01 /* Load new baud rate count value */
#define ACT200L_WIDE    0x04 /* Expand the maximum allowable pulse */

/* Register 4: Output Power register */
#define ACT200L_REG4    0x40
#define ACT200L_OP0     0x01 /* Enable LED1C output */
#define ACT200L_OP1     0x02 /* Enable LED2C output */
#define ACT200L_BLKR    0x04

/* Register 5: Receive Mode register */
#define ACT200L_REG5    0x50
#define ACT200L_RWIDL   0x01 /* fixed 1.6us pulse mode */

/* Register 6: Receive Sensitivity register #1 */
#define ACT200L_REG6    0x60
#define ACT200L_RS0     0x01 /* receive threshold bit 0 */
#define ACT200L_RS1     0x02 /* receive threshold bit 1 */

/* Register 7: Receive Sensitivity register #2 */
#define ACT200L_REG7    0x70
#define ACT200L_ENPOS   0x04 /* Ignore the falling edge */

/* Register 8,9: Baud Rate Dvider register #1,#2 */
#define ACT200L_REG8    0x80
#define ACT200L_REG9    0x90

#define ACT200L_2400    0x5f
#define ACT200L_9600    0x17
#define ACT200L_19200   0x0b
#define ACT200L_38400   0x05
#define ACT200L_57600   0x03
#define ACT200L_115200  0x01

/* Register 13: Control register #3 */
#define ACT200L_REG13   0xd0
#define ACT200L_SHDW    0x01 /* Enable access to shadow registers */

/* Register 15: Status register */
#define ACT200L_REG15   0xf0

/* Register 21: Control register #4 */
#define ACT200L_REG21   0x50
#define ACT200L_EXCK    0x02 /* Disable clock output driver */
#define ACT200L_OSCL    0x04 /* oscillator in low power, medium accuracy mode */

static struct dongle_driver act200l = {
	.owner		= THIS_MODULE,
	.driver_name	= "ACTiSYS ACT-IR200L",
	.type		= IRDA_ACT200L_DONGLE,
	.open		= act200l_open,
	.close		= act200l_close,
	.reset		= act200l_reset,
	.set_speed	= act200l_change_speed,
};

static int __init act200l_sir_init(void)
{
	return irda_register_dongle(&act200l);
}

static void __exit act200l_sir_cleanup(void)
{
	irda_unregister_dongle(&act200l);
}

static int act200l_open(struct sir_dev *dev)
{
	struct qos_info *qos = &dev->qos;

	/* Power on the dongle */
	sirdev_set_dtr_rts(dev, TRUE, TRUE);

	/* Set the speeds we can accept */
	qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
	qos->min_turn_time.bits = 0x03;
	irda_qos_bits_to_value(qos);

	/* irda thread waits 50 msec for power settling */

	return 0;
}

static int act200l_close(struct sir_dev *dev)
{
	/* Power off the dongle */
	sirdev_set_dtr_rts(dev, FALSE, FALSE);

	return 0;
}

/*
 * Function act200l_change_speed (dev, speed)
 *
 *    Set the speed for the ACTiSYS ACT-IR200L type dongle.
 *
 */
static int act200l_change_speed(struct sir_dev *dev, unsigned speed)
{
	u8 control[3];
	int ret = 0;

	/* Clear DTR and set RTS to enter command mode */
	sirdev_set_dtr_rts(dev, FALSE, TRUE);

	switch (speed) {
	default:
		ret = -EINVAL;
		/* fall through */
	case 9600:
		control[0] = ACT200L_REG8 |  (ACT200L_9600       & 0x0f);
		control[1] = ACT200L_REG9 | ((ACT200L_9600 >> 4) & 0x0f);
		break;
	case 19200:
		control[0] = ACT200L_REG8 |  (ACT200L_19200       & 0x0f);
		control[1] = ACT200L_REG9 | ((ACT200L_19200 >> 4) & 0x0f);
		break;
	case 38400:
		control[0] = ACT200L_REG8 |  (ACT200L_38400       & 0x0f);
		control[1] = ACT200L_REG9 | ((ACT200L_38400 >> 4) & 0x0f);
		break;
	case 57600:
		control[0] = ACT200L_REG8 |  (ACT200L_57600       & 0x0f);
		control[1] = ACT200L_REG9 | ((ACT200L_57600 >> 4) & 0x0f);
		break;
	case 115200:
		control[0] = ACT200L_REG8 |  (ACT200L_115200       & 0x0f);
		control[1] = ACT200L_REG9 | ((ACT200L_115200 >> 4) & 0x0f);
		break;
	}
	control[2] = ACT200L_REG1 | ACT200L_LODB | ACT200L_WIDE;

	/* Write control bytes */
	sirdev_raw_write(dev, control, 3);
	msleep(5);

	/* Go back to normal mode */
	sirdev_set_dtr_rts(dev, TRUE, TRUE);

	dev->speed = speed;
	return ret;
}

/*
 * Function act200l_reset (driver)
 *
 *    Reset the ACTiSYS ACT-IR200L type dongle.
 */

#define ACT200L_STATE_WAIT1_RESET	(SIRDEV_STATE_DONGLE_RESET+1)
#define ACT200L_STATE_WAIT2_RESET	(SIRDEV_STATE_DONGLE_RESET+2)

static int act200l_reset(struct sir_dev *dev)
{
	unsigned state = dev->fsm.substate;
	unsigned delay = 0;
	static const u8 control[9] = {
		ACT200L_REG15,
		ACT200L_REG13 | ACT200L_SHDW,
		ACT200L_REG21 | ACT200L_EXCK | ACT200L_OSCL,
		ACT200L_REG13,
		ACT200L_REG7  | ACT200L_ENPOS,
		ACT200L_REG6  | ACT200L_RS0  | ACT200L_RS1,
		ACT200L_REG5  | ACT200L_RWIDL,
		ACT200L_REG4  | ACT200L_OP0  | ACT200L_OP1 | ACT200L_BLKR,
		ACT200L_REG0  | ACT200L_TXEN | ACT200L_RXEN
	};
	int ret = 0;

	switch (state) {
	case SIRDEV_STATE_DONGLE_RESET:
		/* Reset the dongle : set RTS low for 25 ms */
		sirdev_set_dtr_rts(dev, TRUE, FALSE);
		state = ACT200L_STATE_WAIT1_RESET;
		delay = 50;
		break;

	case ACT200L_STATE_WAIT1_RESET:
		/* Clear DTR and set RTS to enter command mode */
		sirdev_set_dtr_rts(dev, FALSE, TRUE);

		udelay(25);			/* better wait for some short while */

		/* Write control bytes */
		sirdev_raw_write(dev, control, sizeof(control));
		state = ACT200L_STATE_WAIT2_RESET;
		delay = 15;
		break;

	case ACT200L_STATE_WAIT2_RESET:
		/* Go back to normal mode */
		sirdev_set_dtr_rts(dev, TRUE, TRUE);
		dev->speed = 9600;
		break;
	default:
		net_err_ratelimited("%s(), unknown state %d\n",
				    __func__, state);
		ret = -1;
		break;
	}
	dev->fsm.substate = state;
	return (delay > 0) ? delay : ret;
}

MODULE_AUTHOR("SHIMIZU Takuya <tshimizu@ga2.so-net.ne.jp>");
MODULE_DESCRIPTION("ACTiSYS ACT-IR200L dongle driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("irda-dongle-10"); /* IRDA_ACT200L_DONGLE */

module_init(act200l_sir_init);
module_exit(act200l_sir_cleanup);
Commit	Line	Data
1da177e4 LT	1	/*********************************************************************
	2	*
	3	* Filename: act200l.c
	4	* Version: 0.8
	5	* Description: Implementation for the ACTiSYS ACT-IR200L dongle
	6	* Status: Experimental.
	7	* Author: SHIMIZU Takuya <tshimizu@ga2.so-net.ne.jp>
	8	* Created at: Fri Aug 3 17:35:42 2001
	9	* Modified at: Fri Aug 17 10:22:40 2001
	10	* Modified by: SHIMIZU Takuya <tshimizu@ga2.so-net.ne.jp>
	11	*
	12	* Copyright (c) 2001 SHIMIZU Takuya, All Rights Reserved.
	13	*
	14	* This program is free software; you can redistribute it and/or
	15	* modify it under the terms of the GNU General Public License as
	16	* published by the Free Software Foundation; either version 2 of
	17	* the License, or (at your option) any later version.
	18	*
	19	********************************************************************/
	20
	21	#include <linux/module.h>
	22	#include <linux/delay.h>
	23	#include <linux/init.h>
	24
	25	#include <net/irda/irda.h>
	26
	27	#include "sir-dev.h"
	28
	29	static int act200l_reset(struct sir_dev *dev);
	30	static int act200l_open(struct sir_dev *dev);
	31	static int act200l_close(struct sir_dev *dev);
	32	static int act200l_change_speed(struct sir_dev *dev, unsigned speed);
	33
	34	/* Regsiter 0: Control register #1 */
	35	#define ACT200L_REG0 0x00
	36	#define ACT200L_TXEN 0x01 /* Enable transmitter */
	37	#define ACT200L_RXEN 0x02 /* Enable receiver */
	38
	39	/* Register 1: Control register #2 */
	40	#define ACT200L_REG1 0x10
	41	#define ACT200L_LODB 0x01 /* Load new baud rate count value */
	42	#define ACT200L_WIDE 0x04 /* Expand the maximum allowable pulse */
	43
	44	/* Register 4: Output Power register */
	45	#define ACT200L_REG4 0x40
	46	#define ACT200L_OP0 0x01 /* Enable LED1C output */
	47	#define ACT200L_OP1 0x02 /* Enable LED2C output */
	48	#define ACT200L_BLKR 0x04
	49
	50	/* Register 5: Receive Mode register */
	51	#define ACT200L_REG5 0x50
	52	#define ACT200L_RWIDL 0x01 /* fixed 1.6us pulse mode */
	53
	54	/* Register 6: Receive Sensitivity register #1 */
	55	#define ACT200L_REG6 0x60
	56	#define ACT200L_RS0 0x01 /* receive threshold bit 0 */
	57	#define ACT200L_RS1 0x02 /* receive threshold bit 1 */
	58
	59	/* Register 7: Receive Sensitivity register #2 */
	60	#define ACT200L_REG7 0x70
	61	#define ACT200L_ENPOS 0x04 /* Ignore the falling edge */
	62
	63	/* Register 8,9: Baud Rate Dvider register #1,#2 */
	64	#define ACT200L_REG8 0x80
65	#define ACT200L_REG9 0x90
66
67	#define ACT200L_2400 0x5f
68	#define ACT200L_9600 0x17
69	#define ACT200L_19200 0x0b
70	#define ACT200L_38400 0x05
71	#define ACT200L_57600 0x03
72	#define ACT200L_115200 0x01
73
74	/* Register 13: Control register #3 */
75	#define ACT200L_REG13 0xd0
76	#define ACT200L_SHDW 0x01 /* Enable access to shadow registers */
77
78	/* Register 15: Status register */
79	#define ACT200L_REG15 0xf0
80
81	/* Register 21: Control register #4 */
82	#define ACT200L_REG21 0x50
83	#define ACT200L_EXCK 0x02 /* Disable clock output driver */
84	#define ACT200L_OSCL 0x04 /* oscillator in low power, medium accuracy mode */
85
86	static struct dongle_driver act200l = {
87	.owner = THIS_MODULE,
88	.driver_name = "ACTiSYS ACT-IR200L",
89	.type = IRDA_ACT200L_DONGLE,
90	.open = act200l_open,
91	.close = act200l_close,
92	.reset = act200l_reset,
93	.set_speed = act200l_change_speed,
94	};
95
96	static int __init act200l_sir_init(void)
97	{
98	return irda_register_dongle(&act200l);
99	}
100
101	static void __exit act200l_sir_cleanup(void)
102	{
103	irda_unregister_dongle(&act200l);
104	}
105
106	static int act200l_open(struct sir_dev *dev)
107	{
108	struct qos_info *qos = &dev->qos;
109
1da177e4 LT	110	/* Power on the dongle */
	111	sirdev_set_dtr_rts(dev, TRUE, TRUE);
	112
	113	/* Set the speeds we can accept */
	114	qos->baud_rate.bits &= IR_9600\|IR_19200\|IR_38400\|IR_57600\|IR_115200;
	115	qos->min_turn_time.bits = 0x03;
	116	irda_qos_bits_to_value(qos);
	117
	118	/* irda thread waits 50 msec for power settling */
	119
	120	return 0;
	121	}
	122
	123	static int act200l_close(struct sir_dev *dev)
	124	{
1da177e4 LT	125	/* Power off the dongle */
	126	sirdev_set_dtr_rts(dev, FALSE, FALSE);
	127
	128	return 0;
	129	}
	130
	131	/*
	132	* Function act200l_change_speed (dev, speed)
	133	*
	134	* Set the speed for the ACTiSYS ACT-IR200L type dongle.
	135	*
	136	*/
	137	static int act200l_change_speed(struct sir_dev *dev, unsigned speed)
	138	{
	139	u8 control[3];
	140	int ret = 0;
	141
1da177e4 LT	142	/* Clear DTR and set RTS to enter command mode */
	143	sirdev_set_dtr_rts(dev, FALSE, TRUE);
	144
	145	switch (speed) {
	146	default:
	147	ret = -EINVAL;
	148	/* fall through */
	149	case 9600:
	150	control[0] = ACT200L_REG8 \| (ACT200L_9600 & 0x0f);
	151	control[1] = ACT200L_REG9 \| ((ACT200L_9600 >> 4) & 0x0f);
	152	break;
	153	case 19200:
	154	control[0] = ACT200L_REG8 \| (ACT200L_19200 & 0x0f);
	155	control[1] = ACT200L_REG9 \| ((ACT200L_19200 >> 4) & 0x0f);
	156	break;
	157	case 38400:
	158	control[0] = ACT200L_REG8 \| (ACT200L_38400 & 0x0f);
	159	control[1] = ACT200L_REG9 \| ((ACT200L_38400 >> 4) & 0x0f);
	160	break;
	161	case 57600:
	162	control[0] = ACT200L_REG8 \| (ACT200L_57600 & 0x0f);
	163	control[1] = ACT200L_REG9 \| ((ACT200L_57600 >> 4) & 0x0f);
	164	break;
	165	case 115200:
	166	control[0] = ACT200L_REG8 \| (ACT200L_115200 & 0x0f);
	167	control[1] = ACT200L_REG9 \| ((ACT200L_115200 >> 4) & 0x0f);
	168	break;
	169	}
	170	control[2] = ACT200L_REG1 \| ACT200L_LODB \| ACT200L_WIDE;
	171
	172	/* Write control bytes */
	173	sirdev_raw_write(dev, control, 3);
	174	msleep(5);
	175
	176	/* Go back to normal mode */
	177	sirdev_set_dtr_rts(dev, TRUE, TRUE);
	178
	179	dev->speed = speed;
	180	return ret;
	181	}
	182
	183	/*
	184	* Function act200l_reset (driver)
	185	*
	186	* Reset the ACTiSYS ACT-IR200L type dongle.
	187	*/
	188
	189	#define ACT200L_STATE_WAIT1_RESET (SIRDEV_STATE_DONGLE_RESET+1)
	190	#define ACT200L_STATE_WAIT2_RESET (SIRDEV_STATE_DONGLE_RESET+2)
	191
	192	static int act200l_reset(struct sir_dev *dev)
	193	{
	194	unsigned state = dev->fsm.substate;
	195	unsigned delay = 0;
215faf9c	196	static const u8 control[9] = {
1da177e4 LT	197	ACT200L_REG15,
	198	ACT200L_REG13 \| ACT200L_SHDW,
	199	ACT200L_REG21 \| ACT200L_EXCK \| ACT200L_OSCL,
	200	ACT200L_REG13,
	201	ACT200L_REG7 \| ACT200L_ENPOS,
	202	ACT200L_REG6 \| ACT200L_RS0 \| ACT200L_RS1,
	203	ACT200L_REG5 \| ACT200L_RWIDL,
	204	ACT200L_REG4 \| ACT200L_OP0 \| ACT200L_OP1 \| ACT200L_BLKR,
	205	ACT200L_REG0 \| ACT200L_TXEN \| ACT200L_RXEN
	206	};
	207	int ret = 0;
	208
1da177e4 LT	209	switch (state) {
	210	case SIRDEV_STATE_DONGLE_RESET:
	211	/* Reset the dongle : set RTS low for 25 ms */
	212	sirdev_set_dtr_rts(dev, TRUE, FALSE);
	213	state = ACT200L_STATE_WAIT1_RESET;
	214	delay = 50;
	215	break;
	216
	217	case ACT200L_STATE_WAIT1_RESET:
	218	/* Clear DTR and set RTS to enter command mode */
	219	sirdev_set_dtr_rts(dev, FALSE, TRUE);
	220
	221	udelay(25); /* better wait for some short while */
	222
	223	/* Write control bytes */
	224	sirdev_raw_write(dev, control, sizeof(control));
	225	state = ACT200L_STATE_WAIT2_RESET;
	226	delay = 15;
	227	break;
	228
	229	case ACT200L_STATE_WAIT2_RESET:
	230	/* Go back to normal mode */
	231	sirdev_set_dtr_rts(dev, TRUE, TRUE);
	232	dev->speed = 9600;
	233	break;
	234	default:
6c91023d JP	235	net_err_ratelimited("%s(), unknown state %d\n",
6c91023d JP	236	__func__, state);
1da177e4 LT	237	ret = -1;
	238	break;
	239	}
	240	dev->fsm.substate = state;
	241	return (delay > 0) ? delay : ret;
	242	}
	243
	244	MODULE_AUTHOR("SHIMIZU Takuya <tshimizu@ga2.so-net.ne.jp>");
	245	MODULE_DESCRIPTION("ACTiSYS ACT-IR200L dongle driver");
	246	MODULE_LICENSE("GPL");
	247	MODULE_ALIAS("irda-dongle-10"); /* IRDA_ACT200L_DONGLE */
	248
	249	module_init(act200l_sir_init);
	250	module_exit(act200l_sir_cleanup);