Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /***************************************************************************** |
2 | * | |
3 | * Filename: stir4200.c | |
4 | * Version: 0.4 | |
5 | * Description: Irda SigmaTel USB Dongle | |
6 | * Status: Experimental | |
7 | * Author: Stephen Hemminger <shemminger@osdl.org> | |
8 | * | |
9 | * Based on earlier driver by Paul Stewart <stewart@parc.com> | |
10 | * | |
11 | * Copyright (C) 2000, Roman Weissgaerber <weissg@vienna.at> | |
12 | * Copyright (C) 2001, Dag Brattli <dag@brattli.net> | |
13 | * Copyright (C) 2001, Jean Tourrilhes <jt@hpl.hp.com> | |
14 | * Copyright (C) 2004, Stephen Hemminger <shemminger@osdl.org> | |
15 | * | |
16 | * This program is free software; you can redistribute it and/or modify | |
17 | * it under the terms of the GNU General Public License as published by | |
798b6b19 | 18 | * the Free Software Foundation; either version 2 of the License. |
1da177e4 LT |
19 | * |
20 | * This program is distributed in the hope that it will be useful, | |
21 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
22 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
23 | * GNU General Public License for more details. | |
24 | * | |
25 | * You should have received a copy of the GNU General Public License | |
26 | * along with this program; if not, write to the Free Software | |
27 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
28 | * | |
29 | *****************************************************************************/ | |
30 | ||
31 | /* | |
32 | * This dongle does no framing, and requires polling to receive the | |
33 | * data. The STIr4200 has bulk in and out endpoints just like | |
34 | * usr-irda devices, but the data it sends and receives is raw; like | |
35 | * irtty, it needs to call the wrap and unwrap functions to add and | |
36 | * remove SOF/BOF and escape characters to/from the frame. | |
37 | */ | |
38 | ||
39 | #include <linux/module.h> | |
40 | #include <linux/moduleparam.h> | |
41 | ||
42 | #include <linux/kernel.h> | |
43 | #include <linux/types.h> | |
44 | #include <linux/init.h> | |
45 | #include <linux/time.h> | |
46 | #include <linux/skbuff.h> | |
47 | #include <linux/netdevice.h> | |
48 | #include <linux/slab.h> | |
49 | #include <linux/delay.h> | |
50 | #include <linux/usb.h> | |
51 | #include <linux/crc32.h> | |
bc1d6937 | 52 | #include <linux/kthread.h> |
7dfb7103 | 53 | #include <linux/freezer.h> |
1da177e4 | 54 | #include <net/irda/irda.h> |
1da177e4 LT |
55 | #include <net/irda/irda_device.h> |
56 | #include <net/irda/wrapper.h> | |
57 | #include <net/irda/crc.h> | |
58 | #include <asm/byteorder.h> | |
59 | #include <asm/unaligned.h> | |
60 | ||
65ebe634 | 61 | MODULE_AUTHOR("Stephen Hemminger <shemminger@linux-foundation.org>"); |
1da177e4 LT |
62 | MODULE_DESCRIPTION("IrDA-USB Dongle Driver for SigmaTel STIr4200"); |
63 | MODULE_LICENSE("GPL"); | |
64 | ||
65 | static int qos_mtt_bits = 0x07; /* 1 ms or more */ | |
66 | module_param(qos_mtt_bits, int, 0); | |
67 | MODULE_PARM_DESC(qos_mtt_bits, "Minimum Turn Time"); | |
68 | ||
69 | static int rx_sensitivity = 1; /* FIR 0..4, SIR 0..6 */ | |
70 | module_param(rx_sensitivity, int, 0); | |
71 | MODULE_PARM_DESC(rx_sensitivity, "Set Receiver sensitivity (0-6, 0 is most sensitive)"); | |
72 | ||
73 | static int tx_power = 0; /* 0 = highest ... 3 = lowest */ | |
74 | module_param(tx_power, int, 0); | |
75 | MODULE_PARM_DESC(tx_power, "Set Transmitter power (0-3, 0 is highest power)"); | |
76 | ||
77 | #define STIR_IRDA_HEADER 4 | |
78 | #define CTRL_TIMEOUT 100 /* milliseconds */ | |
79 | #define TRANSMIT_TIMEOUT 200 /* milliseconds */ | |
80 | #define STIR_FIFO_SIZE 4096 | |
81 | #define FIFO_REGS_SIZE 3 | |
82 | ||
83 | enum FirChars { | |
84 | FIR_CE = 0x7d, | |
85 | FIR_XBOF = 0x7f, | |
86 | FIR_EOF = 0x7e, | |
87 | }; | |
88 | ||
89 | enum StirRequests { | |
90 | REQ_WRITE_REG = 0x00, | |
91 | REQ_READ_REG = 0x01, | |
92 | REQ_READ_ROM = 0x02, | |
93 | REQ_WRITE_SINGLE = 0x03, | |
94 | }; | |
95 | ||
96 | /* Register offsets */ | |
97 | enum StirRegs { | |
98 | REG_RSVD=0, | |
99 | REG_MODE, | |
100 | REG_PDCLK, | |
101 | REG_CTRL1, | |
102 | REG_CTRL2, | |
103 | REG_FIFOCTL, | |
104 | REG_FIFOLSB, | |
105 | REG_FIFOMSB, | |
106 | REG_DPLL, | |
107 | REG_IRDIG, | |
108 | REG_TEST=15, | |
109 | }; | |
110 | ||
111 | enum StirModeMask { | |
112 | MODE_FIR = 0x80, | |
113 | MODE_SIR = 0x20, | |
114 | MODE_ASK = 0x10, | |
115 | MODE_FASTRX = 0x08, | |
116 | MODE_FFRSTEN = 0x04, | |
117 | MODE_NRESET = 0x02, | |
118 | MODE_2400 = 0x01, | |
119 | }; | |
120 | ||
121 | enum StirPdclkMask { | |
122 | PDCLK_4000000 = 0x02, | |
123 | PDCLK_115200 = 0x09, | |
124 | PDCLK_57600 = 0x13, | |
125 | PDCLK_38400 = 0x1D, | |
126 | PDCLK_19200 = 0x3B, | |
127 | PDCLK_9600 = 0x77, | |
128 | PDCLK_2400 = 0xDF, | |
129 | }; | |
130 | ||
131 | enum StirCtrl1Mask { | |
132 | CTRL1_SDMODE = 0x80, | |
133 | CTRL1_RXSLOW = 0x40, | |
134 | CTRL1_TXPWD = 0x10, | |
135 | CTRL1_RXPWD = 0x08, | |
136 | CTRL1_SRESET = 0x01, | |
137 | }; | |
138 | ||
139 | enum StirCtrl2Mask { | |
140 | CTRL2_SPWIDTH = 0x08, | |
141 | CTRL2_REVID = 0x03, | |
142 | }; | |
143 | ||
144 | enum StirFifoCtlMask { | |
1da177e4 LT |
145 | FIFOCTL_DIR = 0x10, |
146 | FIFOCTL_CLR = 0x08, | |
147 | FIFOCTL_EMPTY = 0x04, | |
1da177e4 LT |
148 | }; |
149 | ||
150 | enum StirDiagMask { | |
151 | IRDIG_RXHIGH = 0x80, | |
152 | IRDIG_RXLOW = 0x40, | |
153 | }; | |
154 | ||
155 | enum StirTestMask { | |
156 | TEST_PLLDOWN = 0x80, | |
157 | TEST_LOOPIR = 0x40, | |
158 | TEST_LOOPUSB = 0x20, | |
159 | TEST_TSTENA = 0x10, | |
160 | TEST_TSTOSC = 0x0F, | |
161 | }; | |
162 | ||
163 | struct stir_cb { | |
164 | struct usb_device *usbdev; /* init: probe_irda */ | |
165 | struct net_device *netdev; /* network layer */ | |
166 | struct irlap_cb *irlap; /* The link layer we are binded to */ | |
af049081 | 167 | |
1da177e4 LT |
168 | struct qos_info qos; |
169 | unsigned speed; /* Current speed */ | |
170 | ||
bc1d6937 | 171 | struct task_struct *thread; /* transmit thread */ |
1da177e4 LT |
172 | |
173 | struct sk_buff *tx_pending; | |
174 | void *io_buf; /* transmit/receive buffer */ | |
175 | __u8 *fifo_status; | |
176 | ||
177 | iobuff_t rx_buff; /* receive unwrap state machine */ | |
178 | struct timeval rx_time; | |
179 | int receiving; | |
180 | struct urb *rx_urb; | |
181 | }; | |
182 | ||
183 | ||
184 | /* These are the currently known USB ids */ | |
185 | static struct usb_device_id dongles[] = { | |
186 | /* SigmaTel, Inc, STIr4200 IrDA/USB Bridge */ | |
187 | { USB_DEVICE(0x066f, 0x4200) }, | |
188 | { } | |
189 | }; | |
190 | ||
191 | MODULE_DEVICE_TABLE(usb, dongles); | |
192 | ||
193 | /* Send control message to set dongle register */ | |
194 | static int write_reg(struct stir_cb *stir, __u16 reg, __u8 value) | |
195 | { | |
196 | struct usb_device *dev = stir->usbdev; | |
197 | ||
198 | pr_debug("%s: write reg %d = 0x%x\n", | |
199 | stir->netdev->name, reg, value); | |
200 | return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), | |
201 | REQ_WRITE_SINGLE, | |
202 | USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_DEVICE, | |
203 | value, reg, NULL, 0, | |
204 | CTRL_TIMEOUT); | |
205 | } | |
206 | ||
207 | /* Send control message to read multiple registers */ | |
208 | static inline int read_reg(struct stir_cb *stir, __u16 reg, | |
209 | __u8 *data, __u16 count) | |
210 | { | |
211 | struct usb_device *dev = stir->usbdev; | |
212 | ||
213 | return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), | |
214 | REQ_READ_REG, | |
215 | USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, | |
216 | 0, reg, data, count, | |
217 | CTRL_TIMEOUT); | |
218 | } | |
219 | ||
220 | static inline int isfir(u32 speed) | |
221 | { | |
222 | return (speed == 4000000); | |
223 | } | |
224 | ||
225 | /* | |
226 | * Prepare a FIR IrDA frame for transmission to the USB dongle. The | |
227 | * FIR transmit frame is documented in the datasheet. It consists of | |
228 | * a two byte 0x55 0xAA sequence, two little-endian length bytes, a | |
229 | * sequence of exactly 16 XBOF bytes of 0x7E, two BOF bytes of 0x7E, | |
230 | * then the data escaped as follows: | |
231 | * | |
232 | * 0x7D -> 0x7D 0x5D | |
233 | * 0x7E -> 0x7D 0x5E | |
234 | * 0x7F -> 0x7D 0x5F | |
235 | * | |
236 | * Then, 4 bytes of little endian (stuffed) FCS follow, then two | |
237 | * trailing EOF bytes of 0x7E. | |
238 | */ | |
239 | static inline __u8 *stuff_fir(__u8 *p, __u8 c) | |
240 | { | |
241 | switch(c) { | |
242 | case 0x7d: | |
243 | case 0x7e: | |
244 | case 0x7f: | |
245 | *p++ = 0x7d; | |
246 | c ^= IRDA_TRANS; | |
247 | /* fall through */ | |
248 | default: | |
249 | *p++ = c; | |
250 | } | |
251 | return p; | |
252 | } | |
253 | ||
254 | /* Take raw data in skb and put it wrapped into buf */ | |
255 | static unsigned wrap_fir_skb(const struct sk_buff *skb, __u8 *buf) | |
256 | { | |
257 | __u8 *ptr = buf; | |
258 | __u32 fcs = ~(crc32_le(~0, skb->data, skb->len)); | |
259 | __u16 wraplen; | |
260 | int i; | |
261 | ||
262 | /* Header */ | |
263 | buf[0] = 0x55; | |
264 | buf[1] = 0xAA; | |
265 | ||
266 | ptr = buf + STIR_IRDA_HEADER; | |
267 | memset(ptr, 0x7f, 16); | |
268 | ptr += 16; | |
269 | ||
270 | /* BOF */ | |
271 | *ptr++ = 0x7e; | |
272 | *ptr++ = 0x7e; | |
273 | ||
274 | /* Address / Control / Information */ | |
275 | for (i = 0; i < skb->len; i++) | |
276 | ptr = stuff_fir(ptr, skb->data[i]); | |
277 | ||
278 | /* FCS */ | |
279 | ptr = stuff_fir(ptr, fcs & 0xff); | |
280 | ptr = stuff_fir(ptr, (fcs >> 8) & 0xff); | |
281 | ptr = stuff_fir(ptr, (fcs >> 16) & 0xff); | |
282 | ptr = stuff_fir(ptr, (fcs >> 24) & 0xff); | |
283 | ||
284 | /* EOFs */ | |
285 | *ptr++ = 0x7e; | |
286 | *ptr++ = 0x7e; | |
287 | ||
288 | /* Total length, minus the header */ | |
289 | wraplen = (ptr - buf) - STIR_IRDA_HEADER; | |
290 | buf[2] = wraplen & 0xff; | |
291 | buf[3] = (wraplen >> 8) & 0xff; | |
292 | ||
293 | return wraplen + STIR_IRDA_HEADER; | |
294 | } | |
295 | ||
296 | static unsigned wrap_sir_skb(struct sk_buff *skb, __u8 *buf) | |
297 | { | |
298 | __u16 wraplen; | |
299 | ||
300 | wraplen = async_wrap_skb(skb, buf + STIR_IRDA_HEADER, | |
301 | STIR_FIFO_SIZE - STIR_IRDA_HEADER); | |
302 | buf[0] = 0x55; | |
303 | buf[1] = 0xAA; | |
304 | buf[2] = wraplen & 0xff; | |
305 | buf[3] = (wraplen >> 8) & 0xff; | |
306 | ||
307 | return wraplen + STIR_IRDA_HEADER; | |
308 | } | |
309 | ||
310 | /* | |
311 | * Frame is fully formed in the rx_buff so check crc | |
312 | * and pass up to irlap | |
313 | * setup for next receive | |
314 | */ | |
315 | static void fir_eof(struct stir_cb *stir) | |
316 | { | |
317 | iobuff_t *rx_buff = &stir->rx_buff; | |
318 | int len = rx_buff->len - 4; | |
319 | struct sk_buff *skb, *nskb; | |
320 | __u32 fcs; | |
321 | ||
322 | if (unlikely(len <= 0)) { | |
323 | pr_debug("%s: short frame len %d\n", | |
324 | stir->netdev->name, len); | |
325 | ||
af049081 SH |
326 | ++stir->netdev->stats.rx_errors; |
327 | ++stir->netdev->stats.rx_length_errors; | |
1da177e4 LT |
328 | return; |
329 | } | |
330 | ||
331 | fcs = ~(crc32_le(~0, rx_buff->data, len)); | |
6caf52a4 | 332 | if (fcs != get_unaligned_le32(rx_buff->data + len)) { |
1da177e4 | 333 | pr_debug("crc error calc 0x%x len %d\n", fcs, len); |
af049081 SH |
334 | stir->netdev->stats.rx_errors++; |
335 | stir->netdev->stats.rx_crc_errors++; | |
1da177e4 LT |
336 | return; |
337 | } | |
338 | ||
339 | /* if frame is short then just copy it */ | |
340 | if (len < IRDA_RX_COPY_THRESHOLD) { | |
341 | nskb = dev_alloc_skb(len + 1); | |
342 | if (unlikely(!nskb)) { | |
af049081 | 343 | ++stir->netdev->stats.rx_dropped; |
1da177e4 LT |
344 | return; |
345 | } | |
346 | skb_reserve(nskb, 1); | |
347 | skb = nskb; | |
27d7ff46 | 348 | skb_copy_to_linear_data(nskb, rx_buff->data, len); |
1da177e4 LT |
349 | } else { |
350 | nskb = dev_alloc_skb(rx_buff->truesize); | |
351 | if (unlikely(!nskb)) { | |
af049081 | 352 | ++stir->netdev->stats.rx_dropped; |
1da177e4 LT |
353 | return; |
354 | } | |
355 | skb_reserve(nskb, 1); | |
356 | skb = rx_buff->skb; | |
357 | rx_buff->skb = nskb; | |
358 | rx_buff->head = nskb->data; | |
359 | } | |
360 | ||
361 | skb_put(skb, len); | |
362 | ||
459a98ed | 363 | skb_reset_mac_header(skb); |
1da177e4 LT |
364 | skb->protocol = htons(ETH_P_IRDA); |
365 | skb->dev = stir->netdev; | |
366 | ||
367 | netif_rx(skb); | |
368 | ||
af049081 SH |
369 | stir->netdev->stats.rx_packets++; |
370 | stir->netdev->stats.rx_bytes += len; | |
1da177e4 LT |
371 | |
372 | rx_buff->data = rx_buff->head; | |
373 | rx_buff->len = 0; | |
374 | } | |
375 | ||
376 | /* Unwrap FIR stuffed data and bump it to IrLAP */ | |
377 | static void stir_fir_chars(struct stir_cb *stir, | |
378 | const __u8 *bytes, int len) | |
379 | { | |
380 | iobuff_t *rx_buff = &stir->rx_buff; | |
381 | int i; | |
382 | ||
383 | for (i = 0; i < len; i++) { | |
384 | __u8 byte = bytes[i]; | |
385 | ||
386 | switch(rx_buff->state) { | |
387 | case OUTSIDE_FRAME: | |
388 | /* ignore garbage till start of frame */ | |
389 | if (unlikely(byte != FIR_EOF)) | |
390 | continue; | |
391 | /* Now receiving frame */ | |
392 | rx_buff->state = BEGIN_FRAME; | |
393 | ||
394 | /* Time to initialize receive buffer */ | |
395 | rx_buff->data = rx_buff->head; | |
396 | rx_buff->len = 0; | |
397 | continue; | |
398 | ||
399 | case LINK_ESCAPE: | |
400 | if (byte == FIR_EOF) { | |
401 | pr_debug("%s: got EOF after escape\n", | |
402 | stir->netdev->name); | |
403 | goto frame_error; | |
404 | } | |
405 | rx_buff->state = INSIDE_FRAME; | |
406 | byte ^= IRDA_TRANS; | |
407 | break; | |
408 | ||
409 | case BEGIN_FRAME: | |
410 | /* ignore multiple BOF/EOF */ | |
411 | if (byte == FIR_EOF) | |
412 | continue; | |
413 | rx_buff->state = INSIDE_FRAME; | |
414 | rx_buff->in_frame = TRUE; | |
415 | ||
416 | /* fall through */ | |
417 | case INSIDE_FRAME: | |
418 | switch(byte) { | |
419 | case FIR_CE: | |
420 | rx_buff->state = LINK_ESCAPE; | |
421 | continue; | |
422 | case FIR_XBOF: | |
423 | /* 0x7f is not used in this framing */ | |
424 | pr_debug("%s: got XBOF without escape\n", | |
425 | stir->netdev->name); | |
426 | goto frame_error; | |
427 | case FIR_EOF: | |
428 | rx_buff->state = OUTSIDE_FRAME; | |
429 | rx_buff->in_frame = FALSE; | |
430 | fir_eof(stir); | |
431 | continue; | |
432 | } | |
433 | break; | |
434 | } | |
435 | ||
436 | /* add byte to rx buffer */ | |
437 | if (unlikely(rx_buff->len >= rx_buff->truesize)) { | |
438 | pr_debug("%s: fir frame exceeds %d\n", | |
439 | stir->netdev->name, rx_buff->truesize); | |
af049081 | 440 | ++stir->netdev->stats.rx_over_errors; |
1da177e4 LT |
441 | goto error_recovery; |
442 | } | |
443 | ||
444 | rx_buff->data[rx_buff->len++] = byte; | |
445 | continue; | |
446 | ||
447 | frame_error: | |
af049081 | 448 | ++stir->netdev->stats.rx_frame_errors; |
1da177e4 LT |
449 | |
450 | error_recovery: | |
af049081 | 451 | ++stir->netdev->stats.rx_errors; |
1da177e4 LT |
452 | rx_buff->state = OUTSIDE_FRAME; |
453 | rx_buff->in_frame = FALSE; | |
454 | } | |
455 | } | |
456 | ||
457 | /* Unwrap SIR stuffed data and bump it up to IrLAP */ | |
458 | static void stir_sir_chars(struct stir_cb *stir, | |
459 | const __u8 *bytes, int len) | |
460 | { | |
461 | int i; | |
462 | ||
463 | for (i = 0; i < len; i++) | |
af049081 | 464 | async_unwrap_char(stir->netdev, &stir->netdev->stats, |
1da177e4 LT |
465 | &stir->rx_buff, bytes[i]); |
466 | } | |
467 | ||
468 | static inline void unwrap_chars(struct stir_cb *stir, | |
469 | const __u8 *bytes, int length) | |
470 | { | |
471 | if (isfir(stir->speed)) | |
472 | stir_fir_chars(stir, bytes, length); | |
473 | else | |
474 | stir_sir_chars(stir, bytes, length); | |
475 | } | |
476 | ||
477 | /* Mode parameters for each speed */ | |
478 | static const struct { | |
479 | unsigned speed; | |
480 | __u8 pdclk; | |
481 | } stir_modes[] = { | |
482 | { 2400, PDCLK_2400 }, | |
483 | { 9600, PDCLK_9600 }, | |
484 | { 19200, PDCLK_19200 }, | |
485 | { 38400, PDCLK_38400 }, | |
486 | { 57600, PDCLK_57600 }, | |
487 | { 115200, PDCLK_115200 }, | |
488 | { 4000000, PDCLK_4000000 }, | |
489 | }; | |
490 | ||
491 | ||
492 | /* | |
493 | * Setup chip for speed. | |
494 | * Called at startup to initialize the chip | |
495 | * and on speed changes. | |
496 | * | |
497 | * Note: Write multiple registers doesn't appear to work | |
498 | */ | |
499 | static int change_speed(struct stir_cb *stir, unsigned speed) | |
500 | { | |
501 | int i, err; | |
502 | __u8 mode; | |
503 | ||
504 | for (i = 0; i < ARRAY_SIZE(stir_modes); ++i) { | |
505 | if (speed == stir_modes[i].speed) | |
506 | goto found; | |
507 | } | |
508 | ||
4dc89948 | 509 | dev_warn(&stir->netdev->dev, "invalid speed %d\n", speed); |
1da177e4 LT |
510 | return -EINVAL; |
511 | ||
512 | found: | |
513 | pr_debug("speed change from %d to %d\n", stir->speed, speed); | |
514 | ||
515 | /* Reset modulator */ | |
516 | err = write_reg(stir, REG_CTRL1, CTRL1_SRESET); | |
517 | if (err) | |
518 | goto out; | |
519 | ||
520 | /* Undocumented magic to tweak the DPLL */ | |
521 | err = write_reg(stir, REG_DPLL, 0x15); | |
522 | if (err) | |
523 | goto out; | |
524 | ||
525 | /* Set clock */ | |
526 | err = write_reg(stir, REG_PDCLK, stir_modes[i].pdclk); | |
527 | if (err) | |
528 | goto out; | |
529 | ||
530 | mode = MODE_NRESET | MODE_FASTRX; | |
531 | if (isfir(speed)) | |
532 | mode |= MODE_FIR | MODE_FFRSTEN; | |
533 | else | |
534 | mode |= MODE_SIR; | |
535 | ||
536 | if (speed == 2400) | |
537 | mode |= MODE_2400; | |
538 | ||
539 | err = write_reg(stir, REG_MODE, mode); | |
540 | if (err) | |
541 | goto out; | |
542 | ||
543 | /* This resets TEMIC style transceiver if any. */ | |
544 | err = write_reg(stir, REG_CTRL1, | |
545 | CTRL1_SDMODE | (tx_power & 3) << 1); | |
546 | if (err) | |
547 | goto out; | |
548 | ||
549 | err = write_reg(stir, REG_CTRL1, (tx_power & 3) << 1); | |
550 | if (err) | |
551 | goto out; | |
552 | ||
553 | /* Reset sensitivity */ | |
554 | err = write_reg(stir, REG_CTRL2, (rx_sensitivity & 7) << 5); | |
555 | out: | |
556 | stir->speed = speed; | |
557 | return err; | |
558 | } | |
559 | ||
560 | /* | |
561 | * Called from net/core when new frame is available. | |
562 | */ | |
6518bbb8 SH |
563 | static netdev_tx_t stir_hard_xmit(struct sk_buff *skb, |
564 | struct net_device *netdev) | |
1da177e4 LT |
565 | { |
566 | struct stir_cb *stir = netdev_priv(netdev); | |
567 | ||
568 | netif_stop_queue(netdev); | |
569 | ||
570 | /* the IRDA wrapping routines don't deal with non linear skb */ | |
571 | SKB_LINEAR_ASSERT(skb); | |
572 | ||
573 | skb = xchg(&stir->tx_pending, skb); | |
bc1d6937 | 574 | wake_up_process(stir->thread); |
1da177e4 LT |
575 | |
576 | /* this should never happen unless stop/wakeup problem */ | |
577 | if (unlikely(skb)) { | |
578 | WARN_ON(1); | |
579 | dev_kfree_skb(skb); | |
580 | } | |
581 | ||
6ed10654 | 582 | return NETDEV_TX_OK; |
1da177e4 LT |
583 | } |
584 | ||
585 | /* | |
586 | * Wait for the transmit FIFO to have space for next data | |
587 | * | |
588 | * If space < 0 then wait till FIFO completely drains. | |
589 | * FYI: can take up to 13 seconds at 2400baud. | |
590 | */ | |
591 | static int fifo_txwait(struct stir_cb *stir, int space) | |
592 | { | |
593 | int err; | |
594 | unsigned long count, status; | |
ea332912 | 595 | unsigned long prev_count = 0x1fff; |
1da177e4 LT |
596 | |
597 | /* Read FIFO status and count */ | |
ea332912 | 598 | for (;; prev_count = count) { |
1da177e4 LT |
599 | err = read_reg(stir, REG_FIFOCTL, stir->fifo_status, |
600 | FIFO_REGS_SIZE); | |
601 | if (unlikely(err != FIFO_REGS_SIZE)) { | |
4dc89948 GKH |
602 | dev_warn(&stir->netdev->dev, |
603 | "FIFO register read error: %d\n", err); | |
1da177e4 LT |
604 | |
605 | return err; | |
606 | } | |
607 | ||
608 | status = stir->fifo_status[0]; | |
609 | count = (unsigned)(stir->fifo_status[2] & 0x1f) << 8 | |
610 | | stir->fifo_status[1]; | |
611 | ||
612 | pr_debug("fifo status 0x%lx count %lu\n", status, count); | |
613 | ||
1da177e4 | 614 | /* is fifo receiving already, or empty */ |
8e95a202 JP |
615 | if (!(status & FIFOCTL_DIR) || |
616 | (status & FIFOCTL_EMPTY)) | |
1da177e4 LT |
617 | return 0; |
618 | ||
619 | if (signal_pending(current)) | |
620 | return -EINTR; | |
621 | ||
622 | /* shutting down? */ | |
8e95a202 JP |
623 | if (!netif_running(stir->netdev) || |
624 | !netif_device_present(stir->netdev)) | |
1da177e4 LT |
625 | return -ESHUTDOWN; |
626 | ||
627 | /* only waiting for some space */ | |
628 | if (space >= 0 && STIR_FIFO_SIZE - 4 > space + count) | |
629 | return 0; | |
630 | ||
ea332912 OH |
631 | /* queue confused */ |
632 | if (prev_count < count) | |
633 | break; | |
634 | ||
1da177e4 LT |
635 | /* estimate transfer time for remaining chars */ |
636 | msleep((count * 8000) / stir->speed); | |
637 | } | |
638 | ||
639 | err = write_reg(stir, REG_FIFOCTL, FIFOCTL_CLR); | |
640 | if (err) | |
641 | return err; | |
642 | err = write_reg(stir, REG_FIFOCTL, 0); | |
643 | if (err) | |
644 | return err; | |
645 | ||
646 | return 0; | |
647 | } | |
648 | ||
649 | ||
650 | /* Wait for turnaround delay before starting transmit. */ | |
651 | static void turnaround_delay(const struct stir_cb *stir, long us) | |
652 | { | |
653 | long ticks; | |
654 | struct timeval now; | |
655 | ||
656 | if (us <= 0) | |
657 | return; | |
658 | ||
659 | do_gettimeofday(&now); | |
660 | if (now.tv_sec - stir->rx_time.tv_sec > 0) | |
661 | us -= USEC_PER_SEC; | |
662 | us -= now.tv_usec - stir->rx_time.tv_usec; | |
663 | if (us < 10) | |
664 | return; | |
665 | ||
666 | ticks = us / (1000000 / HZ); | |
3173c890 NA |
667 | if (ticks > 0) |
668 | schedule_timeout_interruptible(1 + ticks); | |
669 | else | |
1da177e4 LT |
670 | udelay(us); |
671 | } | |
672 | ||
673 | /* | |
674 | * Start receiver by submitting a request to the receive pipe. | |
675 | * If nothing is available it will return after rx_interval. | |
676 | */ | |
677 | static int receive_start(struct stir_cb *stir) | |
678 | { | |
679 | /* reset state */ | |
680 | stir->receiving = 1; | |
681 | ||
682 | stir->rx_buff.in_frame = FALSE; | |
683 | stir->rx_buff.state = OUTSIDE_FRAME; | |
684 | ||
685 | stir->rx_urb->status = 0; | |
686 | return usb_submit_urb(stir->rx_urb, GFP_KERNEL); | |
687 | } | |
688 | ||
689 | /* Stop all pending receive Urb's */ | |
690 | static void receive_stop(struct stir_cb *stir) | |
691 | { | |
692 | stir->receiving = 0; | |
693 | usb_kill_urb(stir->rx_urb); | |
694 | ||
695 | if (stir->rx_buff.in_frame) | |
af049081 | 696 | stir->netdev->stats.collisions++; |
1da177e4 LT |
697 | } |
698 | /* | |
699 | * Wrap data in socket buffer and send it. | |
700 | */ | |
701 | static void stir_send(struct stir_cb *stir, struct sk_buff *skb) | |
702 | { | |
703 | unsigned wraplen; | |
704 | int first_frame = 0; | |
705 | ||
706 | /* if receiving, need to turnaround */ | |
707 | if (stir->receiving) { | |
708 | receive_stop(stir); | |
709 | turnaround_delay(stir, irda_get_mtt(skb)); | |
710 | first_frame = 1; | |
711 | } | |
712 | ||
713 | if (isfir(stir->speed)) | |
714 | wraplen = wrap_fir_skb(skb, stir->io_buf); | |
715 | else | |
716 | wraplen = wrap_sir_skb(skb, stir->io_buf); | |
717 | ||
718 | /* check for space available in fifo */ | |
719 | if (!first_frame) | |
720 | fifo_txwait(stir, wraplen); | |
721 | ||
af049081 SH |
722 | stir->netdev->stats.tx_packets++; |
723 | stir->netdev->stats.tx_bytes += skb->len; | |
1da177e4 LT |
724 | stir->netdev->trans_start = jiffies; |
725 | pr_debug("send %d (%d)\n", skb->len, wraplen); | |
726 | ||
727 | if (usb_bulk_msg(stir->usbdev, usb_sndbulkpipe(stir->usbdev, 1), | |
728 | stir->io_buf, wraplen, | |
729 | NULL, TRANSMIT_TIMEOUT)) | |
af049081 | 730 | stir->netdev->stats.tx_errors++; |
1da177e4 LT |
731 | } |
732 | ||
733 | /* | |
734 | * Transmit state machine thread | |
735 | */ | |
736 | static int stir_transmit_thread(void *arg) | |
737 | { | |
738 | struct stir_cb *stir = arg; | |
739 | struct net_device *dev = stir->netdev; | |
740 | struct sk_buff *skb; | |
741 | ||
bc1d6937 | 742 | while (!kthread_should_stop()) { |
1da177e4 LT |
743 | #ifdef CONFIG_PM |
744 | /* if suspending, then power off and wait */ | |
3e1d1d28 | 745 | if (unlikely(freezing(current))) { |
1da177e4 LT |
746 | if (stir->receiving) |
747 | receive_stop(stir); | |
748 | else | |
749 | fifo_txwait(stir, -1); | |
750 | ||
751 | write_reg(stir, REG_CTRL1, CTRL1_TXPWD|CTRL1_RXPWD); | |
752 | ||
3e1d1d28 | 753 | refrigerator(); |
1da177e4 LT |
754 | |
755 | if (change_speed(stir, stir->speed)) | |
756 | break; | |
757 | } | |
758 | #endif | |
759 | ||
760 | /* if something to send? */ | |
761 | skb = xchg(&stir->tx_pending, NULL); | |
762 | if (skb) { | |
763 | unsigned new_speed = irda_get_next_speed(skb); | |
764 | netif_wake_queue(dev); | |
765 | ||
766 | if (skb->len > 0) | |
767 | stir_send(stir, skb); | |
768 | dev_kfree_skb(skb); | |
769 | ||
770 | if ((new_speed != -1) && (stir->speed != new_speed)) { | |
771 | if (fifo_txwait(stir, -1) || | |
772 | change_speed(stir, new_speed)) | |
773 | break; | |
774 | } | |
775 | continue; | |
776 | } | |
777 | ||
778 | /* nothing to send? start receiving */ | |
8e95a202 JP |
779 | if (!stir->receiving && |
780 | irda_device_txqueue_empty(dev)) { | |
1da177e4 LT |
781 | /* Wait otherwise chip gets confused. */ |
782 | if (fifo_txwait(stir, -1)) | |
783 | break; | |
784 | ||
785 | if (unlikely(receive_start(stir))) { | |
786 | if (net_ratelimit()) | |
880c9c66 GKH |
787 | dev_info(&dev->dev, |
788 | "%s: receive usb submit failed\n", | |
789 | stir->netdev->name); | |
1da177e4 LT |
790 | stir->receiving = 0; |
791 | msleep(10); | |
792 | continue; | |
793 | } | |
794 | } | |
795 | ||
796 | /* sleep if nothing to send */ | |
bc1d6937 CH |
797 | set_current_state(TASK_INTERRUPTIBLE); |
798 | schedule(); | |
1da177e4 | 799 | |
bc1d6937 CH |
800 | } |
801 | return 0; | |
1da177e4 LT |
802 | } |
803 | ||
804 | ||
805 | /* | |
806 | * USB bulk receive completion callback. | |
807 | * Wakes up every ms (usb round trip) with wrapped | |
808 | * data. | |
809 | */ | |
7d12e780 | 810 | static void stir_rcv_irq(struct urb *urb) |
1da177e4 LT |
811 | { |
812 | struct stir_cb *stir = urb->context; | |
813 | int err; | |
814 | ||
815 | /* in process of stopping, just drop data */ | |
816 | if (!netif_running(stir->netdev)) | |
817 | return; | |
818 | ||
819 | /* unlink, shutdown, unplug, other nasties */ | |
820 | if (urb->status != 0) | |
821 | return; | |
822 | ||
823 | if (urb->actual_length > 0) { | |
824 | pr_debug("receive %d\n", urb->actual_length); | |
825 | unwrap_chars(stir, urb->transfer_buffer, | |
826 | urb->actual_length); | |
827 | ||
1da177e4 LT |
828 | do_gettimeofday(&stir->rx_time); |
829 | } | |
830 | ||
831 | /* kernel thread is stopping receiver don't resubmit */ | |
832 | if (!stir->receiving) | |
833 | return; | |
834 | ||
835 | /* resubmit existing urb */ | |
836 | err = usb_submit_urb(urb, GFP_ATOMIC); | |
837 | ||
838 | /* in case of error, the kernel thread will restart us */ | |
839 | if (err) { | |
4dc89948 GKH |
840 | dev_warn(&stir->netdev->dev, "usb receive submit error: %d\n", |
841 | err); | |
1da177e4 | 842 | stir->receiving = 0; |
bc1d6937 | 843 | wake_up_process(stir->thread); |
1da177e4 LT |
844 | } |
845 | } | |
846 | ||
847 | /* | |
848 | * Function stir_net_open (dev) | |
849 | * | |
850 | * Network device is taken up. Usually this is done by "ifconfig irda0 up" | |
851 | */ | |
852 | static int stir_net_open(struct net_device *netdev) | |
853 | { | |
854 | struct stir_cb *stir = netdev_priv(netdev); | |
855 | int err; | |
856 | char hwname[16]; | |
857 | ||
858 | err = usb_clear_halt(stir->usbdev, usb_sndbulkpipe(stir->usbdev, 1)); | |
859 | if (err) | |
860 | goto err_out1; | |
861 | err = usb_clear_halt(stir->usbdev, usb_rcvbulkpipe(stir->usbdev, 2)); | |
862 | if (err) | |
863 | goto err_out1; | |
864 | ||
865 | err = change_speed(stir, 9600); | |
866 | if (err) | |
867 | goto err_out1; | |
868 | ||
869 | err = -ENOMEM; | |
870 | ||
871 | /* Initialize for SIR/FIR to copy data directly into skb. */ | |
872 | stir->receiving = 0; | |
873 | stir->rx_buff.truesize = IRDA_SKB_MAX_MTU; | |
874 | stir->rx_buff.skb = dev_alloc_skb(IRDA_SKB_MAX_MTU); | |
875 | if (!stir->rx_buff.skb) | |
876 | goto err_out1; | |
877 | ||
878 | skb_reserve(stir->rx_buff.skb, 1); | |
879 | stir->rx_buff.head = stir->rx_buff.skb->data; | |
880 | do_gettimeofday(&stir->rx_time); | |
881 | ||
882 | stir->rx_urb = usb_alloc_urb(0, GFP_KERNEL); | |
883 | if (!stir->rx_urb) | |
884 | goto err_out2; | |
885 | ||
886 | stir->io_buf = kmalloc(STIR_FIFO_SIZE, GFP_KERNEL); | |
887 | if (!stir->io_buf) | |
888 | goto err_out3; | |
889 | ||
890 | usb_fill_bulk_urb(stir->rx_urb, stir->usbdev, | |
891 | usb_rcvbulkpipe(stir->usbdev, 2), | |
892 | stir->io_buf, STIR_FIFO_SIZE, | |
893 | stir_rcv_irq, stir); | |
894 | ||
895 | stir->fifo_status = kmalloc(FIFO_REGS_SIZE, GFP_KERNEL); | |
896 | if (!stir->fifo_status) | |
897 | goto err_out4; | |
898 | ||
899 | /* | |
900 | * Now that everything should be initialized properly, | |
901 | * Open new IrLAP layer instance to take care of us... | |
902 | * Note : will send immediately a speed change... | |
903 | */ | |
904 | sprintf(hwname, "usb#%d", stir->usbdev->devnum); | |
905 | stir->irlap = irlap_open(netdev, &stir->qos, hwname); | |
906 | if (!stir->irlap) { | |
907 | err("stir4200: irlap_open failed"); | |
908 | goto err_out5; | |
909 | } | |
910 | ||
911 | /** Start kernel thread for transmit. */ | |
bc1d6937 CH |
912 | stir->thread = kthread_run(stir_transmit_thread, stir, |
913 | "%s", stir->netdev->name); | |
914 | if (IS_ERR(stir->thread)) { | |
915 | err = PTR_ERR(stir->thread); | |
1da177e4 LT |
916 | err("stir4200: unable to start kernel thread"); |
917 | goto err_out6; | |
918 | } | |
919 | ||
920 | netif_start_queue(netdev); | |
921 | ||
922 | return 0; | |
923 | ||
924 | err_out6: | |
925 | irlap_close(stir->irlap); | |
926 | err_out5: | |
927 | kfree(stir->fifo_status); | |
928 | err_out4: | |
929 | kfree(stir->io_buf); | |
930 | err_out3: | |
931 | usb_free_urb(stir->rx_urb); | |
932 | err_out2: | |
933 | kfree_skb(stir->rx_buff.skb); | |
934 | err_out1: | |
935 | return err; | |
936 | } | |
937 | ||
938 | /* | |
939 | * Function stir_net_close (stir) | |
940 | * | |
941 | * Network device is taken down. Usually this is done by | |
942 | * "ifconfig irda0 down" | |
943 | */ | |
944 | static int stir_net_close(struct net_device *netdev) | |
945 | { | |
946 | struct stir_cb *stir = netdev_priv(netdev); | |
947 | ||
948 | /* Stop transmit processing */ | |
949 | netif_stop_queue(netdev); | |
950 | ||
951 | /* Kill transmit thread */ | |
bc1d6937 | 952 | kthread_stop(stir->thread); |
1da177e4 LT |
953 | kfree(stir->fifo_status); |
954 | ||
955 | /* Mop up receive urb's */ | |
956 | usb_kill_urb(stir->rx_urb); | |
957 | ||
958 | kfree(stir->io_buf); | |
959 | usb_free_urb(stir->rx_urb); | |
960 | kfree_skb(stir->rx_buff.skb); | |
961 | ||
962 | /* Stop and remove instance of IrLAP */ | |
963 | if (stir->irlap) | |
964 | irlap_close(stir->irlap); | |
965 | ||
966 | stir->irlap = NULL; | |
967 | ||
968 | return 0; | |
969 | } | |
970 | ||
971 | /* | |
972 | * IOCTLs : Extra out-of-band network commands... | |
973 | */ | |
974 | static int stir_net_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd) | |
975 | { | |
976 | struct if_irda_req *irq = (struct if_irda_req *) rq; | |
977 | struct stir_cb *stir = netdev_priv(netdev); | |
978 | int ret = 0; | |
979 | ||
980 | switch (cmd) { | |
981 | case SIOCSBANDWIDTH: /* Set bandwidth */ | |
982 | if (!capable(CAP_NET_ADMIN)) | |
983 | return -EPERM; | |
984 | ||
985 | /* Check if the device is still there */ | |
986 | if (netif_device_present(stir->netdev)) | |
987 | ret = change_speed(stir, irq->ifr_baudrate); | |
988 | break; | |
989 | ||
990 | case SIOCSMEDIABUSY: /* Set media busy */ | |
991 | if (!capable(CAP_NET_ADMIN)) | |
992 | return -EPERM; | |
993 | ||
994 | /* Check if the IrDA stack is still there */ | |
995 | if (netif_running(stir->netdev)) | |
996 | irda_device_set_media_busy(stir->netdev, TRUE); | |
997 | break; | |
998 | ||
999 | case SIOCGRECEIVING: | |
1000 | /* Only approximately true */ | |
1001 | irq->ifr_receiving = stir->receiving; | |
1002 | break; | |
1003 | ||
1004 | default: | |
1005 | ret = -EOPNOTSUPP; | |
1006 | } | |
1007 | ||
1008 | return ret; | |
1009 | } | |
1010 | ||
66ee279f SH |
1011 | static const struct net_device_ops stir_netdev_ops = { |
1012 | .ndo_open = stir_net_open, | |
1013 | .ndo_stop = stir_net_close, | |
1014 | .ndo_start_xmit = stir_hard_xmit, | |
1015 | .ndo_do_ioctl = stir_net_ioctl, | |
1016 | }; | |
1017 | ||
1da177e4 LT |
1018 | /* |
1019 | * This routine is called by the USB subsystem for each new device | |
1020 | * in the system. We need to check if the device is ours, and in | |
1021 | * this case start handling it. | |
1022 | * Note : it might be worth protecting this function by a global | |
1023 | * spinlock... Or not, because maybe USB already deal with that... | |
1024 | */ | |
1025 | static int stir_probe(struct usb_interface *intf, | |
1026 | const struct usb_device_id *id) | |
1027 | { | |
1028 | struct usb_device *dev = interface_to_usbdev(intf); | |
1029 | struct stir_cb *stir = NULL; | |
1030 | struct net_device *net; | |
1031 | int ret = -ENOMEM; | |
1032 | ||
1033 | /* Allocate network device container. */ | |
1034 | net = alloc_irdadev(sizeof(*stir)); | |
1035 | if(!net) | |
1036 | goto err_out1; | |
1037 | ||
1da177e4 LT |
1038 | SET_NETDEV_DEV(net, &intf->dev); |
1039 | stir = netdev_priv(net); | |
1040 | stir->netdev = net; | |
1041 | stir->usbdev = dev; | |
1042 | ||
1043 | ret = usb_reset_configuration(dev); | |
1044 | if (ret != 0) { | |
1045 | err("stir4200: usb reset configuration failed"); | |
1046 | goto err_out2; | |
1047 | } | |
1048 | ||
1049 | printk(KERN_INFO "SigmaTel STIr4200 IRDA/USB found at address %d, " | |
1050 | "Vendor: %x, Product: %x\n", | |
1051 | dev->devnum, le16_to_cpu(dev->descriptor.idVendor), | |
1052 | le16_to_cpu(dev->descriptor.idProduct)); | |
1053 | ||
1054 | /* Initialize QoS for this device */ | |
1055 | irda_init_max_qos_capabilies(&stir->qos); | |
1056 | ||
1057 | /* That's the Rx capability. */ | |
1058 | stir->qos.baud_rate.bits &= IR_2400 | IR_9600 | IR_19200 | | |
1059 | IR_38400 | IR_57600 | IR_115200 | | |
1060 | (IR_4000000 << 8); | |
1061 | stir->qos.min_turn_time.bits &= qos_mtt_bits; | |
1062 | irda_qos_bits_to_value(&stir->qos); | |
1063 | ||
1da177e4 | 1064 | /* Override the network functions we need to use */ |
66ee279f | 1065 | net->netdev_ops = &stir_netdev_ops; |
1da177e4 LT |
1066 | |
1067 | ret = register_netdev(net); | |
1068 | if (ret != 0) | |
1069 | goto err_out2; | |
1070 | ||
880c9c66 GKH |
1071 | dev_info(&intf->dev, "IrDA: Registered SigmaTel device %s\n", |
1072 | net->name); | |
1da177e4 LT |
1073 | |
1074 | usb_set_intfdata(intf, stir); | |
1075 | ||
1076 | return 0; | |
1077 | ||
1078 | err_out2: | |
1079 | free_netdev(net); | |
1080 | err_out1: | |
1081 | return ret; | |
1082 | } | |
1083 | ||
1084 | /* | |
1085 | * The current device is removed, the USB layer tell us to shut it down... | |
1086 | */ | |
1087 | static void stir_disconnect(struct usb_interface *intf) | |
1088 | { | |
1089 | struct stir_cb *stir = usb_get_intfdata(intf); | |
1090 | ||
1091 | if (!stir) | |
1092 | return; | |
1093 | ||
1094 | unregister_netdev(stir->netdev); | |
1095 | free_netdev(stir->netdev); | |
1096 | ||
1097 | usb_set_intfdata(intf, NULL); | |
1098 | } | |
1099 | ||
1100 | #ifdef CONFIG_PM | |
27d72e85 DB |
1101 | /* USB suspend, so power off the transmitter/receiver */ |
1102 | static int stir_suspend(struct usb_interface *intf, pm_message_t message) | |
1da177e4 LT |
1103 | { |
1104 | struct stir_cb *stir = usb_get_intfdata(intf); | |
1105 | ||
1106 | netif_device_detach(stir->netdev); | |
1107 | return 0; | |
1108 | } | |
1109 | ||
1110 | /* Coming out of suspend, so reset hardware */ | |
1111 | static int stir_resume(struct usb_interface *intf) | |
1112 | { | |
1113 | struct stir_cb *stir = usb_get_intfdata(intf); | |
1114 | ||
1115 | netif_device_attach(stir->netdev); | |
1116 | ||
1117 | /* receiver restarted when send thread wakes up */ | |
1118 | return 0; | |
1119 | } | |
1120 | #endif | |
1121 | ||
1122 | /* | |
1123 | * USB device callbacks | |
1124 | */ | |
1125 | static struct usb_driver irda_driver = { | |
1da177e4 LT |
1126 | .name = "stir4200", |
1127 | .probe = stir_probe, | |
1128 | .disconnect = stir_disconnect, | |
1129 | .id_table = dongles, | |
1130 | #ifdef CONFIG_PM | |
1131 | .suspend = stir_suspend, | |
1132 | .resume = stir_resume, | |
1133 | #endif | |
1134 | }; | |
1135 | ||
1136 | /* | |
1137 | * Module insertion | |
1138 | */ | |
1139 | static int __init stir_init(void) | |
1140 | { | |
1141 | return usb_register(&irda_driver); | |
1142 | } | |
1143 | module_init(stir_init); | |
1144 | ||
1145 | /* | |
1146 | * Module removal | |
1147 | */ | |
1148 | static void __exit stir_cleanup(void) | |
1149 | { | |
1150 | /* Deregister the driver and remove all pending instances */ | |
1151 | usb_deregister(&irda_driver); | |
1152 | } | |
1153 | module_exit(stir_cleanup); |