Commit | Line | Data |
---|---|---|
11afc1b1 PW |
1 | /******************************************************************************* |
2 | ||
3 | Intel 10 Gigabit PCI Express Linux driver | |
4 | Copyright(c) 1999 - 2009 Intel Corporation. | |
5 | ||
6 | This program is free software; you can redistribute it and/or modify it | |
7 | under the terms and conditions of the GNU General Public License, | |
8 | version 2, as published by the Free Software Foundation. | |
9 | ||
10 | This program is distributed in the hope it will be useful, but WITHOUT | |
11 | ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
12 | FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | |
13 | more details. | |
14 | ||
15 | You should have received a copy of the GNU General Public License along with | |
16 | this program; if not, write to the Free Software Foundation, Inc., | |
17 | 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. | |
18 | ||
19 | The full GNU General Public License is included in this distribution in | |
20 | the file called "COPYING". | |
21 | ||
22 | Contact Information: | |
23 | e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> | |
24 | Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 | |
25 | ||
26 | *******************************************************************************/ | |
27 | ||
28 | #include <linux/pci.h> | |
29 | #include <linux/delay.h> | |
30 | #include <linux/sched.h> | |
31 | ||
32 | #include "ixgbe.h" | |
33 | #include "ixgbe_phy.h" | |
34 | ||
35 | #define IXGBE_82599_MAX_TX_QUEUES 128 | |
36 | #define IXGBE_82599_MAX_RX_QUEUES 128 | |
37 | #define IXGBE_82599_RAR_ENTRIES 128 | |
38 | #define IXGBE_82599_MC_TBL_SIZE 128 | |
39 | #define IXGBE_82599_VFT_TBL_SIZE 128 | |
40 | ||
41 | s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, | |
42 | ixgbe_link_speed *speed, | |
43 | bool *autoneg); | |
44 | enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw); | |
45 | s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw); | |
46 | s32 ixgbe_setup_mac_link_speed_multispeed_fiber(struct ixgbe_hw *hw, | |
47 | ixgbe_link_speed speed, bool autoneg, | |
48 | bool autoneg_wait_to_complete); | |
49 | s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw); | |
50 | s32 ixgbe_check_mac_link_82599(struct ixgbe_hw *hw, | |
51 | ixgbe_link_speed *speed, | |
52 | bool *link_up, bool link_up_wait_to_complete); | |
53 | s32 ixgbe_setup_mac_link_speed_82599(struct ixgbe_hw *hw, | |
54 | ixgbe_link_speed speed, | |
55 | bool autoneg, | |
56 | bool autoneg_wait_to_complete); | |
57 | static s32 ixgbe_get_copper_link_capabilities_82599(struct ixgbe_hw *hw, | |
58 | ixgbe_link_speed *speed, | |
59 | bool *autoneg); | |
60 | static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw); | |
61 | static s32 ixgbe_setup_copper_link_speed_82599(struct ixgbe_hw *hw, | |
62 | ixgbe_link_speed speed, | |
63 | bool autoneg, | |
64 | bool autoneg_wait_to_complete); | |
65 | s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw); | |
66 | s32 ixgbe_set_vmdq_82599(struct ixgbe_hw *hw, u32 rar, u32 vmdq); | |
67 | s32 ixgbe_clear_vmdq_82599(struct ixgbe_hw *hw, u32 rar, u32 vmdq); | |
68 | s32 ixgbe_set_vfta_82599(struct ixgbe_hw *hw, u32 vlan, | |
69 | u32 vind, bool vlan_on); | |
70 | s32 ixgbe_clear_vfta_82599(struct ixgbe_hw *hw); | |
71 | s32 ixgbe_blink_led_stop_82599(struct ixgbe_hw *hw, u32 index); | |
72 | s32 ixgbe_blink_led_start_82599(struct ixgbe_hw *hw, u32 index); | |
73 | s32 ixgbe_init_uta_tables_82599(struct ixgbe_hw *hw); | |
74 | s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val); | |
75 | s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val); | |
76 | s32 ixgbe_start_hw_rev_0_82599(struct ixgbe_hw *hw); | |
77 | s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw); | |
78 | s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw); | |
79 | u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw); | |
80 | ||
81 | void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw) | |
82 | { | |
83 | struct ixgbe_mac_info *mac = &hw->mac; | |
84 | if (hw->phy.multispeed_fiber) { | |
85 | /* Set up dual speed SFP+ support */ | |
86 | mac->ops.setup_link = | |
87 | &ixgbe_setup_mac_link_multispeed_fiber; | |
88 | mac->ops.setup_link_speed = | |
89 | &ixgbe_setup_mac_link_speed_multispeed_fiber; | |
90 | } else { | |
91 | mac->ops.setup_link = | |
92 | &ixgbe_setup_mac_link_82599; | |
93 | mac->ops.setup_link_speed = | |
94 | &ixgbe_setup_mac_link_speed_82599; | |
95 | } | |
96 | } | |
97 | ||
98 | s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw) | |
99 | { | |
100 | s32 ret_val = 0; | |
101 | u16 list_offset, data_offset, data_value; | |
102 | ||
103 | if (hw->phy.sfp_type != ixgbe_sfp_type_unknown) { | |
104 | ixgbe_init_mac_link_ops_82599(hw); | |
105 | ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset, | |
106 | &data_offset); | |
107 | ||
108 | if (ret_val != 0) | |
109 | goto setup_sfp_out; | |
110 | ||
111 | hw->eeprom.ops.read(hw, ++data_offset, &data_value); | |
112 | while (data_value != 0xffff) { | |
113 | IXGBE_WRITE_REG(hw, IXGBE_CORECTL, data_value); | |
114 | IXGBE_WRITE_FLUSH(hw); | |
115 | hw->eeprom.ops.read(hw, ++data_offset, &data_value); | |
116 | } | |
117 | /* Now restart DSP */ | |
118 | IXGBE_WRITE_REG(hw, IXGBE_CORECTL, 0x00000102); | |
119 | IXGBE_WRITE_REG(hw, IXGBE_CORECTL, 0x00000b1d); | |
120 | IXGBE_WRITE_FLUSH(hw); | |
121 | } | |
122 | ||
123 | setup_sfp_out: | |
124 | return ret_val; | |
125 | } | |
126 | ||
127 | /** | |
128 | * ixgbe_get_pcie_msix_count_82599 - Gets MSI-X vector count | |
129 | * @hw: pointer to hardware structure | |
130 | * | |
131 | * Read PCIe configuration space, and get the MSI-X vector count from | |
132 | * the capabilities table. | |
133 | **/ | |
134 | u32 ixgbe_get_pcie_msix_count_82599(struct ixgbe_hw *hw) | |
135 | { | |
136 | struct ixgbe_adapter *adapter = hw->back; | |
137 | u16 msix_count; | |
138 | pci_read_config_word(adapter->pdev, IXGBE_PCIE_MSIX_82599_CAPS, | |
139 | &msix_count); | |
140 | msix_count &= IXGBE_PCIE_MSIX_TBL_SZ_MASK; | |
141 | ||
142 | /* MSI-X count is zero-based in HW, so increment to give proper value */ | |
143 | msix_count++; | |
144 | ||
145 | return msix_count; | |
146 | } | |
147 | ||
148 | static s32 ixgbe_get_invariants_82599(struct ixgbe_hw *hw) | |
149 | { | |
150 | struct ixgbe_mac_info *mac = &hw->mac; | |
151 | struct ixgbe_phy_info *phy = &hw->phy; | |
152 | s32 ret_val; | |
153 | ||
154 | /* Set the bus information prior to PHY identification */ | |
155 | mac->ops.get_bus_info(hw); | |
156 | ||
157 | /* Call PHY identify routine to get the Cu or SFI phy type */ | |
158 | ret_val = phy->ops.identify(hw); | |
159 | ||
160 | if (ret_val == IXGBE_ERR_SFP_NOT_SUPPORTED) | |
161 | goto get_invariants_out; | |
162 | ||
163 | ixgbe_init_mac_link_ops_82599(hw); | |
164 | ||
165 | /* Setup SFP module if there is one present. */ | |
166 | ret_val = mac->ops.setup_sfp(hw); | |
167 | ||
168 | /* If copper media, overwrite with copper function pointers */ | |
169 | if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) { | |
170 | mac->ops.setup_link = &ixgbe_setup_copper_link_82599; | |
171 | mac->ops.setup_link_speed = | |
172 | &ixgbe_setup_copper_link_speed_82599; | |
173 | mac->ops.get_link_capabilities = | |
174 | &ixgbe_get_copper_link_capabilities_82599; | |
175 | } | |
176 | ||
177 | /* PHY Init */ | |
178 | switch (hw->phy.type) { | |
179 | case ixgbe_phy_tn: | |
180 | phy->ops.check_link = &ixgbe_check_phy_link_tnx; | |
181 | phy->ops.get_firmware_version = | |
182 | &ixgbe_get_phy_firmware_version_tnx; | |
183 | break; | |
184 | default: | |
185 | break; | |
186 | } | |
187 | ||
188 | mac->mcft_size = IXGBE_82599_MC_TBL_SIZE; | |
189 | mac->vft_size = IXGBE_82599_VFT_TBL_SIZE; | |
190 | mac->num_rar_entries = IXGBE_82599_RAR_ENTRIES; | |
191 | mac->max_rx_queues = IXGBE_82599_MAX_RX_QUEUES; | |
192 | mac->max_tx_queues = IXGBE_82599_MAX_TX_QUEUES; | |
193 | mac->max_msix_vectors = ixgbe_get_pcie_msix_count_82599(hw); | |
194 | ||
195 | get_invariants_out: | |
196 | return ret_val; | |
197 | } | |
198 | ||
199 | /** | |
200 | * ixgbe_get_link_capabilities_82599 - Determines link capabilities | |
201 | * @hw: pointer to hardware structure | |
202 | * @speed: pointer to link speed | |
203 | * @negotiation: true when autoneg or autotry is enabled | |
204 | * | |
205 | * Determines the link capabilities by reading the AUTOC register. | |
206 | **/ | |
207 | s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, | |
208 | ixgbe_link_speed *speed, | |
209 | bool *negotiation) | |
210 | { | |
211 | s32 status = 0; | |
212 | ||
213 | switch (hw->mac.orig_autoc & IXGBE_AUTOC_LMS_MASK) { | |
214 | case IXGBE_AUTOC_LMS_1G_LINK_NO_AN: | |
215 | *speed = IXGBE_LINK_SPEED_1GB_FULL; | |
216 | *negotiation = false; | |
217 | break; | |
218 | ||
219 | case IXGBE_AUTOC_LMS_10G_LINK_NO_AN: | |
220 | *speed = IXGBE_LINK_SPEED_10GB_FULL; | |
221 | *negotiation = false; | |
222 | break; | |
223 | ||
224 | case IXGBE_AUTOC_LMS_1G_AN: | |
225 | *speed = IXGBE_LINK_SPEED_1GB_FULL; | |
226 | *negotiation = true; | |
227 | break; | |
228 | ||
229 | case IXGBE_AUTOC_LMS_10G_SERIAL: | |
230 | *speed = IXGBE_LINK_SPEED_10GB_FULL; | |
231 | *negotiation = false; | |
232 | break; | |
233 | ||
234 | case IXGBE_AUTOC_LMS_KX4_KX_KR: | |
235 | case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN: | |
236 | *speed = IXGBE_LINK_SPEED_UNKNOWN; | |
237 | if (hw->mac.orig_autoc & IXGBE_AUTOC_KR_SUPP) | |
238 | *speed |= IXGBE_LINK_SPEED_10GB_FULL; | |
239 | if (hw->mac.orig_autoc & IXGBE_AUTOC_KX4_SUPP) | |
240 | *speed |= IXGBE_LINK_SPEED_10GB_FULL; | |
241 | if (hw->mac.orig_autoc & IXGBE_AUTOC_KX_SUPP) | |
242 | *speed |= IXGBE_LINK_SPEED_1GB_FULL; | |
243 | *negotiation = true; | |
244 | break; | |
245 | ||
246 | case IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII: | |
247 | *speed = IXGBE_LINK_SPEED_100_FULL; | |
248 | if (hw->mac.orig_autoc & IXGBE_AUTOC_KR_SUPP) | |
249 | *speed |= IXGBE_LINK_SPEED_10GB_FULL; | |
250 | if (hw->mac.orig_autoc & IXGBE_AUTOC_KX4_SUPP) | |
251 | *speed |= IXGBE_LINK_SPEED_10GB_FULL; | |
252 | if (hw->mac.orig_autoc & IXGBE_AUTOC_KX_SUPP) | |
253 | *speed |= IXGBE_LINK_SPEED_1GB_FULL; | |
254 | *negotiation = true; | |
255 | break; | |
256 | ||
257 | case IXGBE_AUTOC_LMS_SGMII_1G_100M: | |
258 | *speed = IXGBE_LINK_SPEED_1GB_FULL | IXGBE_LINK_SPEED_100_FULL; | |
259 | *negotiation = false; | |
260 | break; | |
261 | ||
262 | default: | |
263 | status = IXGBE_ERR_LINK_SETUP; | |
264 | goto out; | |
265 | break; | |
266 | } | |
267 | ||
268 | if (hw->phy.multispeed_fiber) { | |
269 | *speed |= IXGBE_LINK_SPEED_10GB_FULL | | |
270 | IXGBE_LINK_SPEED_1GB_FULL; | |
271 | *negotiation = true; | |
272 | } | |
273 | ||
274 | out: | |
275 | return status; | |
276 | } | |
277 | ||
278 | /** | |
279 | * ixgbe_get_copper_link_capabilities_82599 - Determines link capabilities | |
280 | * @hw: pointer to hardware structure | |
281 | * @speed: pointer to link speed | |
282 | * @autoneg: boolean auto-negotiation value | |
283 | * | |
284 | * Determines the link capabilities by reading the AUTOC register. | |
285 | **/ | |
286 | static s32 ixgbe_get_copper_link_capabilities_82599(struct ixgbe_hw *hw, | |
287 | ixgbe_link_speed *speed, | |
288 | bool *autoneg) | |
289 | { | |
290 | s32 status = IXGBE_ERR_LINK_SETUP; | |
291 | u16 speed_ability; | |
292 | ||
293 | *speed = 0; | |
294 | *autoneg = true; | |
295 | ||
296 | status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_SPEED_ABILITY, | |
297 | IXGBE_MDIO_PMA_PMD_DEV_TYPE, | |
298 | &speed_ability); | |
299 | ||
300 | if (status == 0) { | |
301 | if (speed_ability & IXGBE_MDIO_PHY_SPEED_10G) | |
302 | *speed |= IXGBE_LINK_SPEED_10GB_FULL; | |
303 | if (speed_ability & IXGBE_MDIO_PHY_SPEED_1G) | |
304 | *speed |= IXGBE_LINK_SPEED_1GB_FULL; | |
305 | } | |
306 | ||
307 | return status; | |
308 | } | |
309 | ||
310 | /** | |
311 | * ixgbe_get_media_type_82599 - Get media type | |
312 | * @hw: pointer to hardware structure | |
313 | * | |
314 | * Returns the media type (fiber, copper, backplane) | |
315 | **/ | |
316 | enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw) | |
317 | { | |
318 | enum ixgbe_media_type media_type; | |
319 | ||
320 | /* Detect if there is a copper PHY attached. */ | |
321 | if (hw->phy.type == ixgbe_phy_cu_unknown || | |
322 | hw->phy.type == ixgbe_phy_tn) { | |
323 | media_type = ixgbe_media_type_copper; | |
324 | goto out; | |
325 | } | |
326 | ||
327 | switch (hw->device_id) { | |
328 | case IXGBE_DEV_ID_82599: | |
329 | case IXGBE_DEV_ID_82599_KX4: | |
330 | /* Default device ID is mezzanine card KX/KX4 */ | |
331 | media_type = ixgbe_media_type_backplane; | |
332 | break; | |
333 | case IXGBE_DEV_ID_82599_SFP: | |
334 | media_type = ixgbe_media_type_fiber; | |
335 | break; | |
336 | default: | |
337 | media_type = ixgbe_media_type_unknown; | |
338 | break; | |
339 | } | |
340 | out: | |
341 | return media_type; | |
342 | } | |
343 | ||
344 | /** | |
345 | * ixgbe_setup_mac_link_82599 - Setup MAC link settings | |
346 | * @hw: pointer to hardware structure | |
347 | * | |
348 | * Configures link settings based on values in the ixgbe_hw struct. | |
349 | * Restarts the link. Performs autonegotiation if needed. | |
350 | **/ | |
351 | s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw) | |
352 | { | |
353 | u32 autoc_reg; | |
354 | u32 links_reg; | |
355 | u32 i; | |
356 | s32 status = 0; | |
357 | ||
358 | /* Restart link */ | |
359 | autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); | |
360 | autoc_reg |= IXGBE_AUTOC_AN_RESTART; | |
361 | IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg); | |
362 | ||
363 | /* Only poll for autoneg to complete if specified to do so */ | |
364 | if (hw->phy.autoneg_wait_to_complete) { | |
365 | if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) == | |
366 | IXGBE_AUTOC_LMS_KX4_KX_KR || | |
367 | (autoc_reg & IXGBE_AUTOC_LMS_MASK) == | |
368 | IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN || | |
369 | (autoc_reg & IXGBE_AUTOC_LMS_MASK) == | |
370 | IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) { | |
371 | links_reg = 0; /* Just in case Autoneg time = 0 */ | |
372 | for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) { | |
373 | links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); | |
374 | if (links_reg & IXGBE_LINKS_KX_AN_COMP) | |
375 | break; | |
376 | msleep(100); | |
377 | } | |
378 | if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) { | |
379 | status = IXGBE_ERR_AUTONEG_NOT_COMPLETE; | |
380 | hw_dbg(hw, "Autoneg did not complete.\n"); | |
381 | } | |
382 | } | |
383 | } | |
384 | ||
385 | /* Set up flow control */ | |
386 | status = ixgbe_setup_fc_generic(hw, 0); | |
387 | ||
388 | /* Add delay to filter out noises during initial link setup */ | |
389 | msleep(50); | |
390 | ||
391 | return status; | |
392 | } | |
393 | ||
394 | /** | |
395 | * ixgbe_setup_mac_link_multispeed_fiber - Setup MAC link settings | |
396 | * @hw: pointer to hardware structure | |
397 | * | |
398 | * Configures link settings based on values in the ixgbe_hw struct. | |
399 | * Restarts the link for multi-speed fiber at 1G speed, if link | |
400 | * fails at 10G. | |
401 | * Performs autonegotiation if needed. | |
402 | **/ | |
403 | s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw) | |
404 | { | |
405 | s32 status = 0; | |
406 | ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_82599_AUTONEG; | |
4df10466 | 407 | status = ixgbe_setup_mac_link_speed_multispeed_fiber(hw, link_speed, |
11afc1b1 PW |
408 | true, true); |
409 | return status; | |
410 | } | |
411 | ||
412 | /** | |
413 | * ixgbe_setup_mac_link_speed_multispeed_fiber - Set MAC link speed | |
414 | * @hw: pointer to hardware structure | |
415 | * @speed: new link speed | |
416 | * @autoneg: true if autonegotiation enabled | |
417 | * @autoneg_wait_to_complete: true when waiting for completion is needed | |
418 | * | |
419 | * Set the link speed in the AUTOC register and restarts link. | |
420 | **/ | |
421 | s32 ixgbe_setup_mac_link_speed_multispeed_fiber(struct ixgbe_hw *hw, | |
422 | ixgbe_link_speed speed, | |
423 | bool autoneg, | |
424 | bool autoneg_wait_to_complete) | |
425 | { | |
426 | s32 status = 0; | |
427 | ixgbe_link_speed phy_link_speed; | |
428 | ixgbe_link_speed highest_link_speed = IXGBE_LINK_SPEED_UNKNOWN; | |
429 | u32 speedcnt = 0; | |
430 | u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP); | |
431 | bool link_up = false; | |
432 | bool negotiation; | |
433 | ||
434 | /* Mask off requested but non-supported speeds */ | |
435 | hw->mac.ops.get_link_capabilities(hw, &phy_link_speed, &negotiation); | |
436 | speed &= phy_link_speed; | |
437 | ||
438 | /* | |
439 | * Try each speed one by one, highest priority first. We do this in | |
440 | * software because 10gb fiber doesn't support speed autonegotiation. | |
441 | */ | |
442 | if (speed & IXGBE_LINK_SPEED_10GB_FULL) { | |
443 | speedcnt++; | |
444 | highest_link_speed = IXGBE_LINK_SPEED_10GB_FULL; | |
445 | ||
446 | /* Set hardware SDP's */ | |
447 | esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5); | |
448 | IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); | |
449 | ||
450 | ixgbe_setup_mac_link_speed_82599(hw, | |
451 | IXGBE_LINK_SPEED_10GB_FULL, | |
452 | autoneg, | |
453 | autoneg_wait_to_complete); | |
454 | ||
455 | msleep(50); | |
456 | ||
457 | /* If we have link, just jump out */ | |
458 | hw->mac.ops.check_link(hw, &phy_link_speed, &link_up, false); | |
459 | if (link_up) | |
460 | goto out; | |
461 | } | |
462 | ||
463 | if (speed & IXGBE_LINK_SPEED_1GB_FULL) { | |
464 | speedcnt++; | |
465 | if (highest_link_speed == IXGBE_LINK_SPEED_UNKNOWN) | |
466 | highest_link_speed = IXGBE_LINK_SPEED_1GB_FULL; | |
467 | ||
468 | /* Set hardware SDP's */ | |
469 | esdp_reg &= ~IXGBE_ESDP_SDP5; | |
470 | esdp_reg |= IXGBE_ESDP_SDP5_DIR; | |
471 | IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); | |
472 | ||
473 | ixgbe_setup_mac_link_speed_82599( | |
474 | hw, IXGBE_LINK_SPEED_1GB_FULL, autoneg, | |
475 | autoneg_wait_to_complete); | |
476 | ||
477 | msleep(50); | |
478 | ||
479 | /* If we have link, just jump out */ | |
480 | hw->mac.ops.check_link(hw, &phy_link_speed, &link_up, false); | |
481 | if (link_up) | |
482 | goto out; | |
483 | } | |
484 | ||
485 | /* | |
486 | * We didn't get link. Configure back to the highest speed we tried, | |
487 | * (if there was more than one). We call ourselves back with just the | |
488 | * single highest speed that the user requested. | |
489 | */ | |
490 | if (speedcnt > 1) | |
491 | status = ixgbe_setup_mac_link_speed_multispeed_fiber(hw, | |
492 | highest_link_speed, | |
493 | autoneg, | |
494 | autoneg_wait_to_complete); | |
495 | ||
496 | out: | |
497 | return status; | |
498 | } | |
499 | ||
500 | /** | |
501 | * ixgbe_check_mac_link_82599 - Determine link and speed status | |
502 | * @hw: pointer to hardware structure | |
503 | * @speed: pointer to link speed | |
504 | * @link_up: true when link is up | |
505 | * @link_up_wait_to_complete: bool used to wait for link up or not | |
506 | * | |
507 | * Reads the links register to determine if link is up and the current speed | |
508 | **/ | |
509 | s32 ixgbe_check_mac_link_82599(struct ixgbe_hw *hw, ixgbe_link_speed *speed, | |
510 | bool *link_up, bool link_up_wait_to_complete) | |
511 | { | |
512 | u32 links_reg; | |
513 | u32 i; | |
514 | ||
515 | links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); | |
516 | if (link_up_wait_to_complete) { | |
517 | for (i = 0; i < IXGBE_LINK_UP_TIME; i++) { | |
518 | if (links_reg & IXGBE_LINKS_UP) { | |
519 | *link_up = true; | |
520 | break; | |
521 | } else { | |
522 | *link_up = false; | |
523 | } | |
524 | msleep(100); | |
525 | links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); | |
526 | } | |
527 | } else { | |
528 | if (links_reg & IXGBE_LINKS_UP) | |
529 | *link_up = true; | |
530 | else | |
531 | *link_up = false; | |
532 | } | |
533 | ||
534 | if ((links_reg & IXGBE_LINKS_SPEED_82599) == | |
535 | IXGBE_LINKS_SPEED_10G_82599) | |
536 | *speed = IXGBE_LINK_SPEED_10GB_FULL; | |
537 | else if ((links_reg & IXGBE_LINKS_SPEED_82599) == | |
538 | IXGBE_LINKS_SPEED_1G_82599) | |
539 | *speed = IXGBE_LINK_SPEED_1GB_FULL; | |
540 | else | |
541 | *speed = IXGBE_LINK_SPEED_100_FULL; | |
542 | ||
543 | ||
544 | return 0; | |
545 | } | |
546 | ||
547 | /** | |
548 | * ixgbe_setup_mac_link_speed_82599 - Set MAC link speed | |
549 | * @hw: pointer to hardware structure | |
550 | * @speed: new link speed | |
551 | * @autoneg: true if autonegotiation enabled | |
552 | * @autoneg_wait_to_complete: true when waiting for completion is needed | |
553 | * | |
554 | * Set the link speed in the AUTOC register and restarts link. | |
555 | **/ | |
556 | s32 ixgbe_setup_mac_link_speed_82599(struct ixgbe_hw *hw, | |
557 | ixgbe_link_speed speed, bool autoneg, | |
558 | bool autoneg_wait_to_complete) | |
559 | { | |
560 | s32 status = 0; | |
561 | u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); | |
562 | u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2); | |
563 | u32 link_mode = autoc & IXGBE_AUTOC_LMS_MASK; | |
564 | u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK; | |
565 | u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK; | |
566 | u32 links_reg; | |
567 | u32 i; | |
568 | ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN; | |
569 | ||
570 | /* Check to see if speed passed in is supported. */ | |
571 | hw->mac.ops.get_link_capabilities(hw, &link_capabilities, &autoneg); | |
572 | speed &= link_capabilities; | |
573 | ||
574 | if (speed == IXGBE_LINK_SPEED_UNKNOWN) { | |
575 | status = IXGBE_ERR_LINK_SETUP; | |
576 | } else if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR || | |
577 | link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN || | |
578 | link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) { | |
579 | /* Set KX4/KX/KR support according to speed requested */ | |
580 | autoc &= ~(IXGBE_AUTOC_KX4_KX_SUPP_MASK | IXGBE_AUTOC_KR_SUPP); | |
581 | if (speed & IXGBE_LINK_SPEED_10GB_FULL) | |
582 | if (hw->mac.orig_autoc & IXGBE_AUTOC_KX4_SUPP) | |
583 | autoc |= IXGBE_AUTOC_KX4_SUPP; | |
584 | if (hw->mac.orig_autoc & IXGBE_AUTOC_KR_SUPP) | |
585 | autoc |= IXGBE_AUTOC_KR_SUPP; | |
586 | if (speed & IXGBE_LINK_SPEED_1GB_FULL) | |
587 | autoc |= IXGBE_AUTOC_KX_SUPP; | |
588 | } else if ((pma_pmd_1g == IXGBE_AUTOC_1G_SFI) && | |
589 | (link_mode == IXGBE_AUTOC_LMS_1G_LINK_NO_AN || | |
590 | link_mode == IXGBE_AUTOC_LMS_1G_AN)) { | |
591 | /* Switch from 1G SFI to 10G SFI if requested */ | |
592 | if ((speed == IXGBE_LINK_SPEED_10GB_FULL) && | |
593 | (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI)) { | |
594 | autoc &= ~IXGBE_AUTOC_LMS_MASK; | |
595 | autoc |= IXGBE_AUTOC_LMS_10G_SERIAL; | |
596 | } | |
597 | } else if ((pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI) && | |
598 | (link_mode == IXGBE_AUTOC_LMS_10G_SERIAL)) { | |
599 | /* Switch from 10G SFI to 1G SFI if requested */ | |
600 | if ((speed == IXGBE_LINK_SPEED_1GB_FULL) && | |
601 | (pma_pmd_1g == IXGBE_AUTOC_1G_SFI)) { | |
602 | autoc &= ~IXGBE_AUTOC_LMS_MASK; | |
603 | if (autoneg) | |
604 | autoc |= IXGBE_AUTOC_LMS_1G_AN; | |
605 | else | |
606 | autoc |= IXGBE_AUTOC_LMS_1G_LINK_NO_AN; | |
607 | } | |
608 | } | |
609 | ||
610 | if (status == 0) { | |
611 | /* Restart link */ | |
612 | autoc |= IXGBE_AUTOC_AN_RESTART; | |
613 | IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc); | |
614 | ||
615 | /* Only poll for autoneg to complete if specified to do so */ | |
616 | if (autoneg_wait_to_complete) { | |
617 | if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR || | |
618 | link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN || | |
619 | link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) { | |
620 | links_reg = 0; /*Just in case Autoneg time=0*/ | |
621 | for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) { | |
622 | links_reg = | |
623 | IXGBE_READ_REG(hw, IXGBE_LINKS); | |
624 | if (links_reg & IXGBE_LINKS_KX_AN_COMP) | |
625 | break; | |
626 | msleep(100); | |
627 | } | |
628 | if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) { | |
629 | status = | |
630 | IXGBE_ERR_AUTONEG_NOT_COMPLETE; | |
631 | hw_dbg(hw, "Autoneg did not " | |
632 | "complete.\n"); | |
633 | } | |
634 | } | |
635 | } | |
636 | ||
637 | /* Set up flow control */ | |
638 | status = ixgbe_setup_fc_generic(hw, 0); | |
639 | ||
640 | /* Add delay to filter out noises during initial link setup */ | |
641 | msleep(50); | |
642 | } | |
643 | ||
644 | return status; | |
645 | } | |
646 | ||
647 | /** | |
648 | * ixgbe_setup_copper_link_82599 - Setup copper link settings | |
649 | * @hw: pointer to hardware structure | |
650 | * | |
651 | * Restarts the link on PHY and then MAC. Performs autonegotiation if needed. | |
652 | **/ | |
653 | static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw) | |
654 | { | |
655 | s32 status; | |
656 | ||
657 | /* Restart autonegotiation on PHY */ | |
658 | status = hw->phy.ops.setup_link(hw); | |
659 | ||
660 | /* Set up MAC */ | |
661 | ixgbe_setup_mac_link_82599(hw); | |
662 | ||
663 | return status; | |
664 | } | |
665 | ||
666 | /** | |
667 | * ixgbe_setup_copper_link_speed_82599 - Set the PHY autoneg advertised field | |
668 | * @hw: pointer to hardware structure | |
669 | * @speed: new link speed | |
670 | * @autoneg: true if autonegotiation enabled | |
671 | * @autoneg_wait_to_complete: true if waiting is needed to complete | |
672 | * | |
673 | * Restarts link on PHY and MAC based on settings passed in. | |
674 | **/ | |
675 | static s32 ixgbe_setup_copper_link_speed_82599(struct ixgbe_hw *hw, | |
676 | ixgbe_link_speed speed, | |
677 | bool autoneg, | |
678 | bool autoneg_wait_to_complete) | |
679 | { | |
680 | s32 status; | |
681 | ||
682 | /* Setup the PHY according to input speed */ | |
683 | status = hw->phy.ops.setup_link_speed(hw, speed, autoneg, | |
684 | autoneg_wait_to_complete); | |
685 | /* Set up MAC */ | |
686 | ixgbe_setup_mac_link_82599(hw); | |
687 | ||
688 | return status; | |
689 | } | |
690 | ||
691 | /** | |
692 | * ixgbe_reset_hw_82599 - Perform hardware reset | |
693 | * @hw: pointer to hardware structure | |
694 | * | |
695 | * Resets the hardware by resetting the transmit and receive units, masks | |
696 | * and clears all interrupts, perform a PHY reset, and perform a link (MAC) | |
697 | * reset. | |
698 | **/ | |
699 | s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw) | |
700 | { | |
701 | s32 status = 0; | |
702 | u32 ctrl, ctrl_ext; | |
703 | u32 i; | |
704 | u32 autoc; | |
705 | u32 autoc2; | |
706 | ||
707 | /* Call adapter stop to disable tx/rx and clear interrupts */ | |
708 | hw->mac.ops.stop_adapter(hw); | |
709 | ||
710 | /* Reset PHY */ | |
711 | hw->phy.ops.reset(hw); | |
712 | ||
713 | /* | |
714 | * Prevent the PCI-E bus from from hanging by disabling PCI-E master | |
715 | * access and verify no pending requests before reset | |
716 | */ | |
717 | if (ixgbe_disable_pcie_master(hw) != 0) { | |
718 | status = IXGBE_ERR_MASTER_REQUESTS_PENDING; | |
719 | hw_dbg(hw, "PCI-E Master disable polling has failed.\n"); | |
720 | } | |
721 | ||
722 | /* | |
723 | * Issue global reset to the MAC. This needs to be a SW reset. | |
724 | * If link reset is used, it might reset the MAC when mng is using it | |
725 | */ | |
726 | ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); | |
727 | IXGBE_WRITE_REG(hw, IXGBE_CTRL, (ctrl | IXGBE_CTRL_RST)); | |
728 | IXGBE_WRITE_FLUSH(hw); | |
729 | ||
730 | /* Poll for reset bit to self-clear indicating reset is complete */ | |
731 | for (i = 0; i < 10; i++) { | |
732 | udelay(1); | |
733 | ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); | |
734 | if (!(ctrl & IXGBE_CTRL_RST)) | |
735 | break; | |
736 | } | |
737 | if (ctrl & IXGBE_CTRL_RST) { | |
738 | status = IXGBE_ERR_RESET_FAILED; | |
739 | hw_dbg(hw, "Reset polling failed to complete.\n"); | |
740 | } | |
741 | /* Clear PF Reset Done bit so PF/VF Mail Ops can work */ | |
742 | ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT); | |
743 | ctrl_ext |= IXGBE_CTRL_EXT_PFRSTD; | |
744 | IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext); | |
745 | ||
746 | msleep(50); | |
747 | ||
748 | ||
749 | ||
750 | /* | |
751 | * Store the original AUTOC/AUTOC2 values if they have not been | |
752 | * stored off yet. Otherwise restore the stored original | |
753 | * values since the reset operation sets back to defaults. | |
754 | */ | |
755 | autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); | |
756 | autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2); | |
757 | if (hw->mac.orig_link_settings_stored == false) { | |
758 | hw->mac.orig_autoc = autoc; | |
759 | hw->mac.orig_autoc2 = autoc2; | |
760 | hw->mac.orig_link_settings_stored = true; | |
4df10466 | 761 | } else { |
11afc1b1 PW |
762 | if (autoc != hw->mac.orig_autoc) |
763 | IXGBE_WRITE_REG(hw, IXGBE_AUTOC, (hw->mac.orig_autoc | | |
764 | IXGBE_AUTOC_AN_RESTART)); | |
765 | ||
766 | if ((autoc2 & IXGBE_AUTOC2_UPPER_MASK) != | |
767 | (hw->mac.orig_autoc2 & IXGBE_AUTOC2_UPPER_MASK)) { | |
768 | autoc2 &= ~IXGBE_AUTOC2_UPPER_MASK; | |
769 | autoc2 |= (hw->mac.orig_autoc2 & | |
770 | IXGBE_AUTOC2_UPPER_MASK); | |
771 | IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2); | |
772 | } | |
773 | } | |
774 | ||
775 | /* Store the permanent mac address */ | |
776 | hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr); | |
777 | ||
778 | return status; | |
779 | } | |
780 | ||
781 | /** | |
782 | * ixgbe_clear_vmdq_82599 - Disassociate a VMDq pool index from a rx address | |
783 | * @hw: pointer to hardware struct | |
784 | * @rar: receive address register index to disassociate | |
785 | * @vmdq: VMDq pool index to remove from the rar | |
786 | **/ | |
787 | s32 ixgbe_clear_vmdq_82599(struct ixgbe_hw *hw, u32 rar, u32 vmdq) | |
788 | { | |
789 | u32 mpsar_lo, mpsar_hi; | |
790 | u32 rar_entries = hw->mac.num_rar_entries; | |
791 | ||
792 | if (rar < rar_entries) { | |
793 | mpsar_lo = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar)); | |
794 | mpsar_hi = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar)); | |
795 | ||
796 | if (!mpsar_lo && !mpsar_hi) | |
797 | goto done; | |
798 | ||
799 | if (vmdq == IXGBE_CLEAR_VMDQ_ALL) { | |
800 | if (mpsar_lo) { | |
801 | IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), 0); | |
802 | mpsar_lo = 0; | |
803 | } | |
804 | if (mpsar_hi) { | |
805 | IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), 0); | |
806 | mpsar_hi = 0; | |
807 | } | |
808 | } else if (vmdq < 32) { | |
809 | mpsar_lo &= ~(1 << vmdq); | |
810 | IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar_lo); | |
811 | } else { | |
812 | mpsar_hi &= ~(1 << (vmdq - 32)); | |
813 | IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar_hi); | |
814 | } | |
815 | ||
816 | /* was that the last pool using this rar? */ | |
817 | if (mpsar_lo == 0 && mpsar_hi == 0 && rar != 0) | |
818 | hw->mac.ops.clear_rar(hw, rar); | |
819 | } else { | |
820 | hw_dbg(hw, "RAR index %d is out of range.\n", rar); | |
821 | } | |
822 | ||
823 | done: | |
824 | return 0; | |
825 | } | |
826 | ||
827 | /** | |
828 | * ixgbe_set_vmdq_82599 - Associate a VMDq pool index with a rx address | |
829 | * @hw: pointer to hardware struct | |
830 | * @rar: receive address register index to associate with a VMDq index | |
831 | * @vmdq: VMDq pool index | |
832 | **/ | |
833 | s32 ixgbe_set_vmdq_82599(struct ixgbe_hw *hw, u32 rar, u32 vmdq) | |
834 | { | |
835 | u32 mpsar; | |
836 | u32 rar_entries = hw->mac.num_rar_entries; | |
837 | ||
838 | if (rar < rar_entries) { | |
839 | if (vmdq < 32) { | |
840 | mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar)); | |
841 | mpsar |= 1 << vmdq; | |
842 | IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar); | |
843 | } else { | |
844 | mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar)); | |
845 | mpsar |= 1 << (vmdq - 32); | |
846 | IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar); | |
847 | } | |
848 | } else { | |
849 | hw_dbg(hw, "RAR index %d is out of range.\n", rar); | |
850 | } | |
851 | return 0; | |
852 | } | |
853 | ||
854 | /** | |
855 | * ixgbe_set_vfta_82599 - Set VLAN filter table | |
856 | * @hw: pointer to hardware structure | |
857 | * @vlan: VLAN id to write to VLAN filter | |
858 | * @vind: VMDq output index that maps queue to VLAN id in VFVFB | |
859 | * @vlan_on: boolean flag to turn on/off VLAN in VFVF | |
860 | * | |
861 | * Turn on/off specified VLAN in the VLAN filter table. | |
862 | **/ | |
863 | s32 ixgbe_set_vfta_82599(struct ixgbe_hw *hw, u32 vlan, u32 vind, | |
864 | bool vlan_on) | |
865 | { | |
866 | u32 regindex; | |
867 | u32 bitindex; | |
868 | u32 bits; | |
869 | u32 first_empty_slot; | |
870 | ||
871 | if (vlan > 4095) | |
872 | return IXGBE_ERR_PARAM; | |
873 | ||
874 | /* | |
875 | * this is a 2 part operation - first the VFTA, then the | |
876 | * VLVF and VLVFB if vind is set | |
877 | */ | |
878 | ||
879 | /* Part 1 | |
880 | * The VFTA is a bitstring made up of 128 32-bit registers | |
881 | * that enable the particular VLAN id, much like the MTA: | |
882 | * bits[11-5]: which register | |
883 | * bits[4-0]: which bit in the register | |
884 | */ | |
885 | regindex = (vlan >> 5) & 0x7F; | |
886 | bitindex = vlan & 0x1F; | |
887 | bits = IXGBE_READ_REG(hw, IXGBE_VFTA(regindex)); | |
888 | if (vlan_on) | |
889 | bits |= (1 << bitindex); | |
890 | else | |
891 | bits &= ~(1 << bitindex); | |
892 | IXGBE_WRITE_REG(hw, IXGBE_VFTA(regindex), bits); | |
893 | ||
894 | ||
895 | /* Part 2 | |
896 | * If the vind is set | |
897 | * Either vlan_on | |
898 | * make sure the vlan is in VLVF | |
899 | * set the vind bit in the matching VLVFB | |
900 | * Or !vlan_on | |
901 | * clear the pool bit and possibly the vind | |
902 | */ | |
903 | if (vind) { | |
904 | /* find the vlanid or the first empty slot */ | |
905 | first_empty_slot = 0; | |
906 | ||
907 | for (regindex = 1; regindex < IXGBE_VLVF_ENTRIES; regindex++) { | |
908 | bits = IXGBE_READ_REG(hw, IXGBE_VLVF(regindex)); | |
909 | if (!bits && !first_empty_slot) | |
910 | first_empty_slot = regindex; | |
911 | else if ((bits & 0x0FFF) == vlan) | |
912 | break; | |
913 | } | |
914 | ||
915 | if (regindex >= IXGBE_VLVF_ENTRIES) { | |
916 | if (first_empty_slot) | |
917 | regindex = first_empty_slot; | |
918 | else { | |
919 | hw_dbg(hw, "No space in VLVF.\n"); | |
920 | goto out; | |
921 | } | |
922 | } | |
923 | ||
924 | if (vlan_on) { | |
925 | /* set the pool bit */ | |
926 | if (vind < 32) { | |
927 | bits = IXGBE_READ_REG(hw, | |
928 | IXGBE_VLVFB(regindex * 2)); | |
929 | bits |= (1 << vind); | |
930 | IXGBE_WRITE_REG(hw, | |
931 | IXGBE_VLVFB(regindex * 2), bits); | |
932 | } else { | |
933 | bits = IXGBE_READ_REG(hw, | |
934 | IXGBE_VLVFB((regindex * 2) + 1)); | |
935 | bits |= (1 << vind); | |
936 | IXGBE_WRITE_REG(hw, | |
937 | IXGBE_VLVFB((regindex * 2) + 1), bits); | |
938 | } | |
939 | } else { | |
940 | /* clear the pool bit */ | |
941 | if (vind < 32) { | |
942 | bits = IXGBE_READ_REG(hw, | |
943 | IXGBE_VLVFB(regindex * 2)); | |
944 | bits &= ~(1 << vind); | |
945 | IXGBE_WRITE_REG(hw, | |
946 | IXGBE_VLVFB(regindex * 2), bits); | |
947 | bits |= IXGBE_READ_REG(hw, | |
948 | IXGBE_VLVFB((regindex * 2) + 1)); | |
949 | } else { | |
950 | bits = IXGBE_READ_REG(hw, | |
951 | IXGBE_VLVFB((regindex * 2) + 1)); | |
952 | bits &= ~(1 << vind); | |
953 | IXGBE_WRITE_REG(hw, | |
954 | IXGBE_VLVFB((regindex * 2) + 1), bits); | |
955 | bits |= IXGBE_READ_REG(hw, | |
956 | IXGBE_VLVFB(regindex * 2)); | |
957 | } | |
958 | } | |
959 | ||
960 | if (bits) | |
961 | IXGBE_WRITE_REG(hw, IXGBE_VLVF(regindex), | |
962 | (IXGBE_VLVF_VIEN | vlan)); | |
963 | else | |
964 | IXGBE_WRITE_REG(hw, IXGBE_VLVF(regindex), 0); | |
965 | } | |
966 | ||
967 | out: | |
968 | return 0; | |
969 | } | |
970 | ||
971 | /** | |
972 | * ixgbe_clear_vfta_82599 - Clear VLAN filter table | |
973 | * @hw: pointer to hardware structure | |
974 | * | |
975 | * Clears the VLAN filer table, and the VMDq index associated with the filter | |
976 | **/ | |
977 | s32 ixgbe_clear_vfta_82599(struct ixgbe_hw *hw) | |
978 | { | |
979 | u32 offset; | |
980 | ||
981 | for (offset = 0; offset < hw->mac.vft_size; offset++) | |
982 | IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0); | |
983 | ||
984 | for (offset = 0; offset < IXGBE_VLVF_ENTRIES; offset++) { | |
985 | IXGBE_WRITE_REG(hw, IXGBE_VLVF(offset), 0); | |
986 | IXGBE_WRITE_REG(hw, IXGBE_VLVFB(offset * 2), 0); | |
987 | IXGBE_WRITE_REG(hw, IXGBE_VLVFB((offset * 2) + 1), 0); | |
988 | } | |
989 | ||
990 | return 0; | |
991 | } | |
992 | ||
993 | /** | |
994 | * ixgbe_blink_led_start_82599 - Blink LED based on index. | |
995 | * @hw: pointer to hardware structure | |
996 | * @index: led number to blink | |
997 | **/ | |
998 | s32 ixgbe_blink_led_start_82599(struct ixgbe_hw *hw, u32 index) | |
999 | { | |
1000 | u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); | |
1001 | ||
1002 | led_reg &= ~IXGBE_LED_MODE_MASK(index); | |
1003 | led_reg |= IXGBE_LED_BLINK(index); | |
1004 | IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); | |
1005 | IXGBE_WRITE_FLUSH(hw); | |
1006 | ||
1007 | return 0; | |
1008 | } | |
1009 | ||
1010 | /** | |
1011 | * ixgbe_blink_led_stop_82599 - Stop blinking LED based on index. | |
1012 | * @hw: pointer to hardware structure | |
1013 | * @index: led number to stop blinking | |
1014 | **/ | |
1015 | s32 ixgbe_blink_led_stop_82599(struct ixgbe_hw *hw, u32 index) | |
1016 | { | |
1017 | u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); | |
1018 | ||
1019 | led_reg &= ~IXGBE_LED_MODE_MASK(index); | |
1020 | led_reg &= ~IXGBE_LED_BLINK(index); | |
1021 | IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); | |
1022 | IXGBE_WRITE_FLUSH(hw); | |
1023 | ||
1024 | return 0; | |
1025 | } | |
1026 | ||
1027 | /** | |
1028 | * ixgbe_init_uta_tables_82599 - Initialize the Unicast Table Array | |
1029 | * @hw: pointer to hardware structure | |
1030 | **/ | |
1031 | s32 ixgbe_init_uta_tables_82599(struct ixgbe_hw *hw) | |
1032 | { | |
1033 | int i; | |
1034 | hw_dbg(hw, " Clearing UTA\n"); | |
1035 | ||
1036 | for (i = 0; i < 128; i++) | |
1037 | IXGBE_WRITE_REG(hw, IXGBE_UTA(i), 0); | |
1038 | ||
1039 | return 0; | |
1040 | } | |
1041 | ||
1042 | /** | |
1043 | * ixgbe_read_analog_reg8_82599 - Reads 8 bit Omer analog register | |
1044 | * @hw: pointer to hardware structure | |
1045 | * @reg: analog register to read | |
1046 | * @val: read value | |
1047 | * | |
1048 | * Performs read operation to Omer analog register specified. | |
1049 | **/ | |
1050 | s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val) | |
1051 | { | |
1052 | u32 core_ctl; | |
1053 | ||
1054 | IXGBE_WRITE_REG(hw, IXGBE_CORECTL, IXGBE_CORECTL_WRITE_CMD | | |
1055 | (reg << 8)); | |
1056 | IXGBE_WRITE_FLUSH(hw); | |
1057 | udelay(10); | |
1058 | core_ctl = IXGBE_READ_REG(hw, IXGBE_CORECTL); | |
1059 | *val = (u8)core_ctl; | |
1060 | ||
1061 | return 0; | |
1062 | } | |
1063 | ||
1064 | /** | |
1065 | * ixgbe_write_analog_reg8_82599 - Writes 8 bit Omer analog register | |
1066 | * @hw: pointer to hardware structure | |
1067 | * @reg: atlas register to write | |
1068 | * @val: value to write | |
1069 | * | |
1070 | * Performs write operation to Omer analog register specified. | |
1071 | **/ | |
1072 | s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val) | |
1073 | { | |
1074 | u32 core_ctl; | |
1075 | ||
1076 | core_ctl = (reg << 8) | val; | |
1077 | IXGBE_WRITE_REG(hw, IXGBE_CORECTL, core_ctl); | |
1078 | IXGBE_WRITE_FLUSH(hw); | |
1079 | udelay(10); | |
1080 | ||
1081 | return 0; | |
1082 | } | |
1083 | ||
1084 | /** | |
1085 | * ixgbe_start_hw_82599 - Prepare hardware for Tx/Rx | |
1086 | * @hw: pointer to hardware structure | |
1087 | * | |
1088 | * Starts the hardware using the generic start_hw function. | |
1089 | * Then performs device-specific: | |
1090 | * Clears the rate limiter registers. | |
1091 | **/ | |
1092 | s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw) | |
1093 | { | |
1094 | u32 q_num; | |
1095 | ||
1096 | ixgbe_start_hw_generic(hw); | |
1097 | ||
1098 | /* Clear the rate limiters */ | |
1099 | for (q_num = 0; q_num < hw->mac.max_tx_queues; q_num++) { | |
1100 | IXGBE_WRITE_REG(hw, IXGBE_RTTDQSEL, q_num); | |
1101 | IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRC, 0); | |
1102 | } | |
1103 | IXGBE_WRITE_FLUSH(hw); | |
1104 | ||
1105 | return 0; | |
1106 | } | |
1107 | ||
1108 | /** | |
1109 | * ixgbe_identify_phy_82599 - Get physical layer module | |
1110 | * @hw: pointer to hardware structure | |
1111 | * | |
1112 | * Determines the physical layer module found on the current adapter. | |
1113 | **/ | |
1114 | s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw) | |
1115 | { | |
1116 | s32 status = IXGBE_ERR_PHY_ADDR_INVALID; | |
1117 | status = ixgbe_identify_phy_generic(hw); | |
1118 | if (status != 0) | |
1119 | status = ixgbe_identify_sfp_module_generic(hw); | |
1120 | return status; | |
1121 | } | |
1122 | ||
1123 | /** | |
1124 | * ixgbe_get_supported_physical_layer_82599 - Returns physical layer type | |
1125 | * @hw: pointer to hardware structure | |
1126 | * | |
1127 | * Determines physical layer capabilities of the current configuration. | |
1128 | **/ | |
1129 | u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw) | |
1130 | { | |
1131 | u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; | |
1339b9e9 | 1132 | u8 comp_codes_10g = 0; |
11afc1b1 PW |
1133 | |
1134 | switch (hw->device_id) { | |
1135 | case IXGBE_DEV_ID_82599: | |
1136 | case IXGBE_DEV_ID_82599_KX4: | |
1137 | /* Default device ID is mezzanine card KX/KX4 */ | |
1138 | physical_layer = (IXGBE_PHYSICAL_LAYER_10GBASE_KX4 | | |
1139 | IXGBE_PHYSICAL_LAYER_1000BASE_KX); | |
1140 | break; | |
1141 | case IXGBE_DEV_ID_82599_SFP: | |
1142 | hw->phy.ops.identify_sfp(hw); | |
1143 | ||
1144 | switch (hw->phy.sfp_type) { | |
1145 | case ixgbe_sfp_type_da_cu: | |
1339b9e9 PW |
1146 | case ixgbe_sfp_type_da_cu_core0: |
1147 | case ixgbe_sfp_type_da_cu_core1: | |
11afc1b1 PW |
1148 | physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU; |
1149 | break; | |
1150 | case ixgbe_sfp_type_sr: | |
1151 | physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR; | |
1152 | break; | |
1153 | case ixgbe_sfp_type_lr: | |
1154 | physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR; | |
1155 | break; | |
1339b9e9 PW |
1156 | case ixgbe_sfp_type_srlr_core0: |
1157 | case ixgbe_sfp_type_srlr_core1: | |
1158 | hw->phy.ops.read_i2c_eeprom(hw, | |
1159 | IXGBE_SFF_10GBE_COMP_CODES, | |
1160 | &comp_codes_10g); | |
1161 | if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE) | |
1162 | physical_layer = | |
1163 | IXGBE_PHYSICAL_LAYER_10GBASE_SR; | |
1164 | else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE) | |
1165 | physical_layer = | |
1166 | IXGBE_PHYSICAL_LAYER_10GBASE_LR; | |
1167 | else | |
1168 | physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; | |
11afc1b1 PW |
1169 | default: |
1170 | physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; | |
1171 | break; | |
1172 | } | |
1173 | break; | |
1174 | default: | |
1175 | physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; | |
1176 | break; | |
1177 | } | |
1178 | ||
1179 | return physical_layer; | |
1180 | } | |
1181 | ||
1182 | /** | |
1183 | * ixgbe_enable_rx_dma_82599 - Enable the Rx DMA unit on 82599 | |
1184 | * @hw: pointer to hardware structure | |
1185 | * @regval: register value to write to RXCTRL | |
1186 | * | |
1187 | * Enables the Rx DMA unit for 82599 | |
1188 | **/ | |
1189 | s32 ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval) | |
1190 | { | |
1191 | #define IXGBE_MAX_SECRX_POLL 30 | |
1192 | int i; | |
1193 | int secrxreg; | |
1194 | ||
1195 | /* | |
1196 | * Workaround for 82599 silicon errata when enabling the Rx datapath. | |
1197 | * If traffic is incoming before we enable the Rx unit, it could hang | |
1198 | * the Rx DMA unit. Therefore, make sure the security engine is | |
1199 | * completely disabled prior to enabling the Rx unit. | |
1200 | */ | |
1201 | secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL); | |
1202 | secrxreg |= IXGBE_SECRXCTRL_RX_DIS; | |
1203 | IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, secrxreg); | |
1204 | for (i = 0; i < IXGBE_MAX_SECRX_POLL; i++) { | |
1205 | secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXSTAT); | |
1206 | if (secrxreg & IXGBE_SECRXSTAT_SECRX_RDY) | |
1207 | break; | |
1208 | else | |
1209 | udelay(10); | |
1210 | } | |
1211 | ||
1212 | /* For informational purposes only */ | |
1213 | if (i >= IXGBE_MAX_SECRX_POLL) | |
1214 | hw_dbg(hw, "Rx unit being enabled before security " | |
1215 | "path fully disabled. Continuing with init.\n"); | |
1216 | ||
1217 | IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, regval); | |
1218 | secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL); | |
1219 | secrxreg &= ~IXGBE_SECRXCTRL_RX_DIS; | |
1220 | IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, secrxreg); | |
1221 | IXGBE_WRITE_FLUSH(hw); | |
1222 | ||
1223 | return 0; | |
1224 | } | |
1225 | ||
1226 | static struct ixgbe_mac_operations mac_ops_82599 = { | |
1227 | .init_hw = &ixgbe_init_hw_generic, | |
1228 | .reset_hw = &ixgbe_reset_hw_82599, | |
1229 | .start_hw = &ixgbe_start_hw_82599, | |
1230 | .clear_hw_cntrs = &ixgbe_clear_hw_cntrs_generic, | |
1231 | .get_media_type = &ixgbe_get_media_type_82599, | |
1232 | .get_supported_physical_layer = &ixgbe_get_supported_physical_layer_82599, | |
1233 | .enable_rx_dma = &ixgbe_enable_rx_dma_82599, | |
1234 | .get_mac_addr = &ixgbe_get_mac_addr_generic, | |
1235 | .stop_adapter = &ixgbe_stop_adapter_generic, | |
1236 | .get_bus_info = &ixgbe_get_bus_info_generic, | |
1237 | .set_lan_id = &ixgbe_set_lan_id_multi_port_pcie, | |
1238 | .read_analog_reg8 = &ixgbe_read_analog_reg8_82599, | |
1239 | .write_analog_reg8 = &ixgbe_write_analog_reg8_82599, | |
1240 | .setup_link = &ixgbe_setup_mac_link_82599, | |
1241 | .setup_link_speed = &ixgbe_setup_mac_link_speed_82599, | |
1242 | .check_link = &ixgbe_check_mac_link_82599, | |
1243 | .get_link_capabilities = &ixgbe_get_link_capabilities_82599, | |
1244 | .led_on = &ixgbe_led_on_generic, | |
1245 | .led_off = &ixgbe_led_off_generic, | |
1246 | .blink_led_start = &ixgbe_blink_led_start_82599, | |
1247 | .blink_led_stop = &ixgbe_blink_led_stop_82599, | |
1248 | .set_rar = &ixgbe_set_rar_generic, | |
1249 | .clear_rar = &ixgbe_clear_rar_generic, | |
1250 | .set_vmdq = &ixgbe_set_vmdq_82599, | |
1251 | .clear_vmdq = &ixgbe_clear_vmdq_82599, | |
1252 | .init_rx_addrs = &ixgbe_init_rx_addrs_generic, | |
1253 | .update_uc_addr_list = &ixgbe_update_uc_addr_list_generic, | |
1254 | .update_mc_addr_list = &ixgbe_update_mc_addr_list_generic, | |
1255 | .enable_mc = &ixgbe_enable_mc_generic, | |
1256 | .disable_mc = &ixgbe_disable_mc_generic, | |
1257 | .clear_vfta = &ixgbe_clear_vfta_82599, | |
1258 | .set_vfta = &ixgbe_set_vfta_82599, | |
1259 | .setup_fc = &ixgbe_setup_fc_generic, | |
1260 | .init_uta_tables = &ixgbe_init_uta_tables_82599, | |
1261 | .setup_sfp = &ixgbe_setup_sfp_modules_82599, | |
1262 | }; | |
1263 | ||
1264 | static struct ixgbe_eeprom_operations eeprom_ops_82599 = { | |
1265 | .init_params = &ixgbe_init_eeprom_params_generic, | |
1266 | .read = &ixgbe_read_eeprom_generic, | |
1267 | .write = &ixgbe_write_eeprom_generic, | |
1268 | .validate_checksum = &ixgbe_validate_eeprom_checksum_generic, | |
1269 | .update_checksum = &ixgbe_update_eeprom_checksum_generic, | |
1270 | }; | |
1271 | ||
1272 | static struct ixgbe_phy_operations phy_ops_82599 = { | |
1273 | .identify = &ixgbe_identify_phy_82599, | |
1274 | .identify_sfp = &ixgbe_identify_sfp_module_generic, | |
1275 | .reset = &ixgbe_reset_phy_generic, | |
1276 | .read_reg = &ixgbe_read_phy_reg_generic, | |
1277 | .write_reg = &ixgbe_write_phy_reg_generic, | |
1278 | .setup_link = &ixgbe_setup_phy_link_generic, | |
1279 | .setup_link_speed = &ixgbe_setup_phy_link_speed_generic, | |
1280 | .read_i2c_byte = &ixgbe_read_i2c_byte_generic, | |
1281 | .write_i2c_byte = &ixgbe_write_i2c_byte_generic, | |
1282 | .read_i2c_eeprom = &ixgbe_read_i2c_eeprom_generic, | |
1283 | .write_i2c_eeprom = &ixgbe_write_i2c_eeprom_generic, | |
1284 | }; | |
1285 | ||
1286 | struct ixgbe_info ixgbe_82599_info = { | |
1287 | .mac = ixgbe_mac_82599EB, | |
1288 | .get_invariants = &ixgbe_get_invariants_82599, | |
1289 | .mac_ops = &mac_ops_82599, | |
1290 | .eeprom_ops = &eeprom_ops_82599, | |
1291 | .phy_ops = &phy_ops_82599, | |
1292 | }; |