[deliverable/linux.git] / drivers / net / phy / bcm87xx.c

/*
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file "COPYING" in the main directory of this archive
 * for more details.
 *
 * Copyright (C) 2011 - 2012 Cavium, Inc.
 */

#include <linux/module.h>
#include <linux/phy.h>
#include <linux/of.h>

#define PHY_ID_BCM8706	0x0143bdc1
#define PHY_ID_BCM8727	0x0143bff0

#define BCM87XX_PMD_RX_SIGNAL_DETECT	(MII_ADDR_C45 | 0x1000a)
#define BCM87XX_10GBASER_PCS_STATUS	(MII_ADDR_C45 | 0x30020)
#define BCM87XX_XGXS_LANE_STATUS	(MII_ADDR_C45 | 0x40018)

#define BCM87XX_LASI_CONTROL (MII_ADDR_C45 | 0x39002)
#define BCM87XX_LASI_STATUS (MII_ADDR_C45 | 0x39005)

#if IS_ENABLED(CONFIG_OF_MDIO)
/* Set and/or override some configuration registers based on the
 * broadcom,c45-reg-init property stored in the of_node for the phydev.
 *
 * broadcom,c45-reg-init = <devid reg mask value>,...;
 *
 * There may be one or more sets of <devid reg mask value>:
 *
 * devid: which sub-device to use.
 * reg: the register.
 * mask: if non-zero, ANDed with existing register value.
 * value: ORed with the masked value and written to the regiser.
 *
 */
static int bcm87xx_of_reg_init(struct phy_device *phydev)
{
	const __be32 *paddr;
	const __be32 *paddr_end;
	int len, ret;

	if (!phydev->mdio.dev.of_node)
		return 0;

	paddr = of_get_property(phydev->mdio.dev.of_node,
				"broadcom,c45-reg-init", &len);
	if (!paddr)
		return 0;

	paddr_end = paddr + (len /= sizeof(*paddr));

	ret = 0;

	while (paddr + 3 < paddr_end) {
		u16 devid	= be32_to_cpup(paddr++);
		u16 reg		= be32_to_cpup(paddr++);
		u16 mask	= be32_to_cpup(paddr++);
		u16 val_bits	= be32_to_cpup(paddr++);
		int val;
		u32 regnum = MII_ADDR_C45 | (devid << 16) | reg;
		val = 0;
		if (mask) {
			val = phy_read(phydev, regnum);
			if (val < 0) {
				ret = val;
				goto err;
			}
			val &= mask;
		}
		val |= val_bits;

		ret = phy_write(phydev, regnum, val);
		if (ret < 0)
			goto err;
	}
err:
	return ret;
}
#else
static int bcm87xx_of_reg_init(struct phy_device *phydev)
{
	return 0;
}
#endif /* CONFIG_OF_MDIO */

static int bcm87xx_config_init(struct phy_device *phydev)
{
	phydev->supported = SUPPORTED_10000baseR_FEC;
	phydev->advertising = ADVERTISED_10000baseR_FEC;
	phydev->state = PHY_NOLINK;
	phydev->autoneg = AUTONEG_DISABLE;

	bcm87xx_of_reg_init(phydev);

	return 0;
}

static int bcm87xx_config_aneg(struct phy_device *phydev)
{
	return -EINVAL;
}

static int bcm87xx_read_status(struct phy_device *phydev)
{
	int rx_signal_detect;
	int pcs_status;
	int xgxs_lane_status;

	rx_signal_detect = phy_read(phydev, BCM87XX_PMD_RX_SIGNAL_DETECT);
	if (rx_signal_detect < 0)
		return rx_signal_detect;

	if ((rx_signal_detect & 1) == 0)
		goto no_link;

	pcs_status = phy_read(phydev, BCM87XX_10GBASER_PCS_STATUS);
	if (pcs_status < 0)
		return pcs_status;

	if ((pcs_status & 1) == 0)
		goto no_link;

	xgxs_lane_status = phy_read(phydev, BCM87XX_XGXS_LANE_STATUS);
	if (xgxs_lane_status < 0)
		return xgxs_lane_status;

	if ((xgxs_lane_status & 0x1000) == 0)
		goto no_link;

	phydev->speed = 10000;
	phydev->link = 1;
	phydev->duplex = 1;
	return 0;

no_link:
	phydev->link = 0;
	return 0;
}

static int bcm87xx_config_intr(struct phy_device *phydev)
{
	int reg, err;

	reg = phy_read(phydev, BCM87XX_LASI_CONTROL);

	if (reg < 0)
		return reg;

	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
		reg |= 1;
	else
		reg &= ~1;

	err = phy_write(phydev, BCM87XX_LASI_CONTROL, reg);
	return err;
}

static int bcm87xx_did_interrupt(struct phy_device *phydev)
{
	int reg;

	reg = phy_read(phydev, BCM87XX_LASI_STATUS);

	if (reg < 0) {
		phydev_err(phydev,
			   "Error: Read of BCM87XX_LASI_STATUS failed: %d\n",
			   reg);
		return 0;
	}
	return (reg & 1) != 0;
}

static int bcm87xx_ack_interrupt(struct phy_device *phydev)
{
	/* Reading the LASI status clears it. */
	bcm87xx_did_interrupt(phydev);
	return 0;
}

static int bcm8706_match_phy_device(struct phy_device *phydev)
{
	return phydev->c45_ids.device_ids[4] == PHY_ID_BCM8706;
}

static int bcm8727_match_phy_device(struct phy_device *phydev)
{
	return phydev->c45_ids.device_ids[4] == PHY_ID_BCM8727;
}

static struct phy_driver bcm87xx_driver[] = {
{
	.phy_id		= PHY_ID_BCM8706,
	.phy_id_mask	= 0xffffffff,
	.name		= "Broadcom BCM8706",
	.flags		= PHY_HAS_INTERRUPT,
	.config_init	= bcm87xx_config_init,
	.config_aneg	= bcm87xx_config_aneg,
	.read_status	= bcm87xx_read_status,
	.ack_interrupt	= bcm87xx_ack_interrupt,
	.config_intr	= bcm87xx_config_intr,
	.did_interrupt	= bcm87xx_did_interrupt,
	.match_phy_device = bcm8706_match_phy_device,
}, {
	.phy_id		= PHY_ID_BCM8727,
	.phy_id_mask	= 0xffffffff,
	.name		= "Broadcom BCM8727",
	.flags		= PHY_HAS_INTERRUPT,
	.config_init	= bcm87xx_config_init,
	.config_aneg	= bcm87xx_config_aneg,
	.read_status	= bcm87xx_read_status,
	.ack_interrupt	= bcm87xx_ack_interrupt,
	.config_intr	= bcm87xx_config_intr,
	.did_interrupt	= bcm87xx_did_interrupt,
	.match_phy_device = bcm8727_match_phy_device,
} };

module_phy_driver(bcm87xx_driver);

MODULE_LICENSE("GPL");
Commit	Line	Data
e9976d7c DD	1	/*
	2	* This file is subject to the terms and conditions of the GNU General Public
	3	* License. See the file "COPYING" in the main directory of this archive
	4	* for more details.
	5	*
	6	* Copyright (C) 2011 - 2012 Cavium, Inc.
	7	*/
	8
	9	#include <linux/module.h>
	10	#include <linux/phy.h>
	11	#include <linux/of.h>
	12
	13	#define PHY_ID_BCM8706 0x0143bdc1
	14	#define PHY_ID_BCM8727 0x0143bff0
	15
	16	#define BCM87XX_PMD_RX_SIGNAL_DETECT (MII_ADDR_C45 \| 0x1000a)
	17	#define BCM87XX_10GBASER_PCS_STATUS (MII_ADDR_C45 \| 0x30020)
	18	#define BCM87XX_XGXS_LANE_STATUS (MII_ADDR_C45 \| 0x40018)
	19
	20	#define BCM87XX_LASI_CONTROL (MII_ADDR_C45 \| 0x39002)
	21	#define BCM87XX_LASI_STATUS (MII_ADDR_C45 \| 0x39005)
	22
	23	#if IS_ENABLED(CONFIG_OF_MDIO)
	24	/* Set and/or override some configuration registers based on the
806a0fbe	25	* broadcom,c45-reg-init property stored in the of_node for the phydev.
e9976d7c DD	26	*
	27	* broadcom,c45-reg-init = <devid reg mask value>,...;
	28	*
	29	* There may be one or more sets of <devid reg mask value>:
	30	*
	31	* devid: which sub-device to use.
	32	* reg: the register.
	33	* mask: if non-zero, ANDed with existing register value.
	34	* value: ORed with the masked value and written to the regiser.
	35	*
	36	*/
	37	static int bcm87xx_of_reg_init(struct phy_device *phydev)
	38	{
	39	const __be32 *paddr;
	40	const __be32 *paddr_end;
	41	int len, ret;
	42
e5a03bfd	43	if (!phydev->mdio.dev.of_node)
e9976d7c DD	44	return 0;
e9976d7c DD	45
e5a03bfd	46	paddr = of_get_property(phydev->mdio.dev.of_node,
e9976d7c DD	47	"broadcom,c45-reg-init", &len);
	48	if (!paddr)
	49	return 0;
	50
	51	paddr_end = paddr + (len /= sizeof(*paddr));
	52
	53	ret = 0;
	54
	55	while (paddr + 3 < paddr_end) {
	56	u16 devid = be32_to_cpup(paddr++);
	57	u16 reg = be32_to_cpup(paddr++);
	58	u16 mask = be32_to_cpup(paddr++);
	59	u16 val_bits = be32_to_cpup(paddr++);
	60	int val;
	61	u32 regnum = MII_ADDR_C45 \| (devid << 16) \| reg;
	62	val = 0;
	63	if (mask) {
	64	val = phy_read(phydev, regnum);
	65	if (val < 0) {
	66	ret = val;
	67	goto err;
	68	}
	69	val &= mask;
	70	}
	71	val \|= val_bits;
	72
	73	ret = phy_write(phydev, regnum, val);
	74	if (ret < 0)
	75	goto err;
	76	}
	77	err:
	78	return ret;
	79	}
	80	#else
	81	static int bcm87xx_of_reg_init(struct phy_device *phydev)
	82	{
	83	return 0;
	84	}
	85	#endif /* CONFIG_OF_MDIO */
	86
	87	static int bcm87xx_config_init(struct phy_device *phydev)
	88	{
	89	phydev->supported = SUPPORTED_10000baseR_FEC;
	90	phydev->advertising = ADVERTISED_10000baseR_FEC;
	91	phydev->state = PHY_NOLINK;
567990cf	92	phydev->autoneg = AUTONEG_DISABLE;
e9976d7c DD	93
	94	bcm87xx_of_reg_init(phydev);
	95
	96	return 0;
	97	}
	98
	99	static int bcm87xx_config_aneg(struct phy_device *phydev)
	100	{
	101	return -EINVAL;
	102	}
	103
	104	static int bcm87xx_read_status(struct phy_device *phydev)
	105	{
	106	int rx_signal_detect;
	107	int pcs_status;
	108	int xgxs_lane_status;
	109
	110	rx_signal_detect = phy_read(phydev, BCM87XX_PMD_RX_SIGNAL_DETECT);
	111	if (rx_signal_detect < 0)
	112	return rx_signal_detect;
	113
	114	if ((rx_signal_detect & 1) == 0)
	115	goto no_link;
	116
	117	pcs_status = phy_read(phydev, BCM87XX_10GBASER_PCS_STATUS);
	118	if (pcs_status < 0)
	119	return pcs_status;
	120
	121	if ((pcs_status & 1) == 0)
	122	goto no_link;
	123
	124	xgxs_lane_status = phy_read(phydev, BCM87XX_XGXS_LANE_STATUS);
	125	if (xgxs_lane_status < 0)
	126	return xgxs_lane_status;
	127
	128	if ((xgxs_lane_status & 0x1000) == 0)
	129	goto no_link;
	130
	131	phydev->speed = 10000;
	132	phydev->link = 1;
	133	phydev->duplex = 1;
	134	return 0;
	135
	136	no_link:
	137	phydev->link = 0;
	138	return 0;
	139	}
	140
	141	static int bcm87xx_config_intr(struct phy_device *phydev)
	142	{
	143	int reg, err;
	144
	145	reg = phy_read(phydev, BCM87XX_LASI_CONTROL);
	146
	147	if (reg < 0)
	148	return reg;
	149
	150	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
	151	reg \|= 1;
	152	else
	153	reg &= ~1;
	154
	155	err = phy_write(phydev, BCM87XX_LASI_CONTROL, reg);
	156	return err;
157	}
158
159	static int bcm87xx_did_interrupt(struct phy_device *phydev)
160	{
161	int reg;
162
163	reg = phy_read(phydev, BCM87XX_LASI_STATUS);
164
165	if (reg < 0) {
72ba48be AL	166	phydev_err(phydev,
	167	"Error: Read of BCM87XX_LASI_STATUS failed: %d\n",
	168	reg);
e9976d7c DD	169	return 0;
	170	}
	171	return (reg & 1) != 0;
	172	}
	173
	174	static int bcm87xx_ack_interrupt(struct phy_device *phydev)
	175	{
	176	/* Reading the LASI status clears it. */
	177	bcm87xx_did_interrupt(phydev);
	178	return 0;
	179	}
	180
	181	static int bcm8706_match_phy_device(struct phy_device *phydev)
	182	{
	183	return phydev->c45_ids.device_ids[4] == PHY_ID_BCM8706;
	184	}
	185
	186	static int bcm8727_match_phy_device(struct phy_device *phydev)
	187	{
	188	return phydev->c45_ids.device_ids[4] == PHY_ID_BCM8727;
	189	}
	190
d5bf9071 CH	191	static struct phy_driver bcm87xx_driver[] = {
d5bf9071 CH	192	{
e9976d7c DD	193	.phy_id = PHY_ID_BCM8706,
	194	.phy_id_mask = 0xffffffff,
	195	.name = "Broadcom BCM8706",
	196	.flags = PHY_HAS_INTERRUPT,
	197	.config_init = bcm87xx_config_init,
	198	.config_aneg = bcm87xx_config_aneg,
	199	.read_status = bcm87xx_read_status,
	200	.ack_interrupt = bcm87xx_ack_interrupt,
	201	.config_intr = bcm87xx_config_intr,
	202	.did_interrupt = bcm87xx_did_interrupt,
	203	.match_phy_device = bcm8706_match_phy_device,
d5bf9071	204	}, {
e9976d7c DD	205	.phy_id = PHY_ID_BCM8727,
	206	.phy_id_mask = 0xffffffff,
	207	.name = "Broadcom BCM8727",
	208	.flags = PHY_HAS_INTERRUPT,
	209	.config_init = bcm87xx_config_init,
	210	.config_aneg = bcm87xx_config_aneg,
	211	.read_status = bcm87xx_read_status,
	212	.ack_interrupt = bcm87xx_ack_interrupt,
	213	.config_intr = bcm87xx_config_intr,
	214	.did_interrupt = bcm87xx_did_interrupt,
	215	.match_phy_device = bcm8727_match_phy_device,
d5bf9071	216	} };
e9976d7c	217
50fd7150	218	module_phy_driver(bcm87xx_driver);
9913b8c8 PH	219
9913b8c8 PH	220	MODULE_LICENSE("GPL");