[deliverable/linux.git] / drivers / net / phy / marvell.c

/*
 * drivers/net/phy/marvell.c
 *
 * Driver for Marvell PHYs
 *
 * Author: Andy Fleming
 *
 * Copyright (c) 2004 Freescale Semiconductor, Inc.
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 *
 */
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/unistd.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/spinlock.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/phy.h>

#include <asm/io.h>
#include <asm/irq.h>
#include <asm/uaccess.h>

#define MII_M1011_IEVENT		0x13
#define MII_M1011_IEVENT_CLEAR		0x0000

#define MII_M1011_IMASK			0x12
#define MII_M1011_IMASK_INIT		0x6400
#define MII_M1011_IMASK_CLEAR		0x0000

#define MII_M1011_PHY_SCR		0x10
#define MII_M1011_PHY_SCR_AUTO_CROSS	0x0060

#define MII_M1145_PHY_EXT_CR		0x14
#define MII_M1145_RGMII_RX_DELAY	0x0080
#define MII_M1145_RGMII_TX_DELAY	0x0002

#define M1145_DEV_FLAGS_RESISTANCE	0x00000001

#define MII_M1111_PHY_LED_CONTROL	0x18
#define MII_M1111_PHY_LED_DIRECT	0x4100
#define MII_M1111_PHY_LED_COMBINE	0x411c
#define MII_M1111_PHY_EXT_CR		0x14
#define MII_M1111_RX_DELAY		0x80
#define MII_M1111_TX_DELAY		0x2
#define MII_M1111_PHY_EXT_SR		0x1b

#define MII_M1111_HWCFG_MODE_MASK		0xf
#define MII_M1111_HWCFG_MODE_COPPER_RGMII	0xb
#define MII_M1111_HWCFG_MODE_FIBER_RGMII	0x3
#define MII_M1111_HWCFG_MODE_SGMII_NO_CLK	0x4
#define MII_M1111_HWCFG_FIBER_COPPER_AUTO	0x8000
#define MII_M1111_HWCFG_FIBER_COPPER_RES	0x2000

#define MII_M1111_COPPER		0
#define MII_M1111_FIBER			1

#define MII_M1011_PHY_STATUS		0x11
#define MII_M1011_PHY_STATUS_1000	0x8000
#define MII_M1011_PHY_STATUS_100	0x4000
#define MII_M1011_PHY_STATUS_SPD_MASK	0xc000
#define MII_M1011_PHY_STATUS_FULLDUPLEX	0x2000
#define MII_M1011_PHY_STATUS_RESOLVED	0x0800
#define MII_M1011_PHY_STATUS_LINK	0x0400


MODULE_DESCRIPTION("Marvell PHY driver");
MODULE_AUTHOR("Andy Fleming");
MODULE_LICENSE("GPL");

static int marvell_ack_interrupt(struct phy_device *phydev)
{
	int err;

	/* Clear the interrupts by reading the reg */
	err = phy_read(phydev, MII_M1011_IEVENT);

	if (err < 0)
		return err;

	return 0;
}

static int marvell_config_intr(struct phy_device *phydev)
{
	int err;

	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
		err = phy_write(phydev, MII_M1011_IMASK, MII_M1011_IMASK_INIT);
	else
		err = phy_write(phydev, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR);

	return err;
}

static int marvell_config_aneg(struct phy_device *phydev)
{
	int err;

	/* The Marvell PHY has an errata which requires
	 * that certain registers get written in order
	 * to restart autonegotiation */
	err = phy_write(phydev, MII_BMCR, BMCR_RESET);

	if (err < 0)
		return err;

	err = phy_write(phydev, 0x1d, 0x1f);
	if (err < 0)
		return err;

	err = phy_write(phydev, 0x1e, 0x200c);
	if (err < 0)
		return err;

	err = phy_write(phydev, 0x1d, 0x5);
	if (err < 0)
		return err;

	err = phy_write(phydev, 0x1e, 0);
	if (err < 0)
		return err;

	err = phy_write(phydev, 0x1e, 0x100);
	if (err < 0)
		return err;

	err = phy_write(phydev, MII_M1011_PHY_SCR,
			MII_M1011_PHY_SCR_AUTO_CROSS);
	if (err < 0)
		return err;

	err = phy_write(phydev, MII_M1111_PHY_LED_CONTROL,
			MII_M1111_PHY_LED_DIRECT);
	if (err < 0)
		return err;

	err = genphy_config_aneg(phydev);

	return err;
}

static int m88e1111_config_init(struct phy_device *phydev)
{
	int err;
	int temp;
	int mode;

	/* Enable Fiber/Copper auto selection */
	temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
	temp &= ~MII_M1111_HWCFG_FIBER_COPPER_AUTO;
	phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);

	temp = phy_read(phydev, MII_BMCR);
	temp |= BMCR_RESET;
	phy_write(phydev, MII_BMCR, temp);

	if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) ||
	    (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) ||
	    (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) ||
	    (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)) {

		temp = phy_read(phydev, MII_M1111_PHY_EXT_CR);
		if (temp < 0)
			return temp;

		if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
			temp |= (MII_M1111_RX_DELAY | MII_M1111_TX_DELAY);
		} else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
			temp &= ~MII_M1111_TX_DELAY;
			temp |= MII_M1111_RX_DELAY;
		} else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
			temp &= ~MII_M1111_RX_DELAY;
			temp |= MII_M1111_TX_DELAY;
		}

		err = phy_write(phydev, MII_M1111_PHY_EXT_CR, temp);
		if (err < 0)
			return err;

		temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
		if (temp < 0)
			return temp;

		temp &= ~(MII_M1111_HWCFG_MODE_MASK);

		mode = phy_read(phydev, MII_M1111_PHY_EXT_CR);

		if (mode & MII_M1111_HWCFG_FIBER_COPPER_RES)
			temp |= MII_M1111_HWCFG_MODE_FIBER_RGMII;
		else
			temp |= MII_M1111_HWCFG_MODE_COPPER_RGMII;

		err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
		if (err < 0)
			return err;
	}

	if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
		temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
		if (temp < 0)
			return temp;

		temp &= ~(MII_M1111_HWCFG_MODE_MASK);
		temp |= MII_M1111_HWCFG_MODE_SGMII_NO_CLK;

		err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
		if (err < 0)
			return err;
	}

	err = phy_write(phydev, MII_BMCR, BMCR_RESET);
	if (err < 0)
		return err;

	return 0;
}

static int m88e1145_config_init(struct phy_device *phydev)
{
	int err;

	/* Take care of errata E0 & E1 */
	err = phy_write(phydev, 0x1d, 0x001b);
	if (err < 0)
		return err;

	err = phy_write(phydev, 0x1e, 0x418f);
	if (err < 0)
		return err;

	err = phy_write(phydev, 0x1d, 0x0016);
	if (err < 0)
		return err;

	err = phy_write(phydev, 0x1e, 0xa2da);
	if (err < 0)
		return err;

	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
		int temp = phy_read(phydev, MII_M1145_PHY_EXT_CR);
		if (temp < 0)
			return temp;

		temp |= (MII_M1145_RGMII_RX_DELAY | MII_M1145_RGMII_TX_DELAY);

		err = phy_write(phydev, MII_M1145_PHY_EXT_CR, temp);
		if (err < 0)
			return err;

		if (phydev->dev_flags & M1145_DEV_FLAGS_RESISTANCE) {
			err = phy_write(phydev, 0x1d, 0x0012);
			if (err < 0)
				return err;

			temp = phy_read(phydev, 0x1e);
			if (temp < 0)
				return temp;

			temp &= 0xf03f;
			temp |= 2 << 9;	/* 36 ohm */
			temp |= 2 << 6;	/* 39 ohm */

			err = phy_write(phydev, 0x1e, temp);
			if (err < 0)
				return err;

			err = phy_write(phydev, 0x1d, 0x3);
			if (err < 0)
				return err;

			err = phy_write(phydev, 0x1e, 0x8000);
			if (err < 0)
				return err;
		}
	}

	return 0;
}

/* marvell_read_status
 *
 * Generic status code does not detect Fiber correctly!
 * Description:
 *   Check the link, then figure out the current state
 *   by comparing what we advertise with what the link partner
 *   advertises.  Start by checking the gigabit possibilities,
 *   then move on to 10/100.
 */
static int marvell_read_status(struct phy_device *phydev)
{
	int adv;
	int err;
	int lpa;
	int status = 0;

	/* Update the link, but return if there
	 * was an error */
	err = genphy_update_link(phydev);
	if (err)
		return err;

	if (AUTONEG_ENABLE == phydev->autoneg) {
		status = phy_read(phydev, MII_M1011_PHY_STATUS);
		if (status < 0)
			return status;

		lpa = phy_read(phydev, MII_LPA);
		if (lpa < 0)
			return lpa;

		adv = phy_read(phydev, MII_ADVERTISE);
		if (adv < 0)
			return adv;

		lpa &= adv;

		if (status & MII_M1011_PHY_STATUS_FULLDUPLEX)
			phydev->duplex = DUPLEX_FULL;
		else
			phydev->duplex = DUPLEX_HALF;

		status = status & MII_M1011_PHY_STATUS_SPD_MASK;
		phydev->pause = phydev->asym_pause = 0;

		switch (status) {
		case MII_M1011_PHY_STATUS_1000:
			phydev->speed = SPEED_1000;
			break;

		case MII_M1011_PHY_STATUS_100:
			phydev->speed = SPEED_100;
			break;

		default:
			phydev->speed = SPEED_10;
			break;
		}

		if (phydev->duplex == DUPLEX_FULL) {
			phydev->pause = lpa & LPA_PAUSE_CAP ? 1 : 0;
			phydev->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0;
		}
	} else {
		int bmcr = phy_read(phydev, MII_BMCR);

		if (bmcr < 0)
			return bmcr;

		if (bmcr & BMCR_FULLDPLX)
			phydev->duplex = DUPLEX_FULL;
		else
			phydev->duplex = DUPLEX_HALF;

		if (bmcr & BMCR_SPEED1000)
			phydev->speed = SPEED_1000;
		else if (bmcr & BMCR_SPEED100)
			phydev->speed = SPEED_100;
		else
			phydev->speed = SPEED_10;

		phydev->pause = phydev->asym_pause = 0;
	}

	return 0;
}

static struct phy_driver marvell_drivers[] = {
	{
		.phy_id = 0x01410c60,
		.phy_id_mask = 0xfffffff0,
		.name = "Marvell 88E1101",
		.features = PHY_GBIT_FEATURES,
		.flags = PHY_HAS_INTERRUPT,
		.config_aneg = &marvell_config_aneg,
		.read_status = &genphy_read_status,
		.ack_interrupt = &marvell_ack_interrupt,
		.config_intr = &marvell_config_intr,
		.driver = { .owner = THIS_MODULE },
	},
	{
		.phy_id = 0x01410c90,
		.phy_id_mask = 0xfffffff0,
		.name = "Marvell 88E1112",
		.features = PHY_GBIT_FEATURES,
		.flags = PHY_HAS_INTERRUPT,
		.config_init = &m88e1111_config_init,
		.config_aneg = &marvell_config_aneg,
		.read_status = &genphy_read_status,
		.ack_interrupt = &marvell_ack_interrupt,
		.config_intr = &marvell_config_intr,
		.driver = { .owner = THIS_MODULE },
	},
	{
		.phy_id = 0x01410cc0,
		.phy_id_mask = 0xfffffff0,
		.name = "Marvell 88E1111",
		.features = PHY_GBIT_FEATURES,
		.flags = PHY_HAS_INTERRUPT,
		.config_init = &m88e1111_config_init,
		.config_aneg = &marvell_config_aneg,
		.read_status = &marvell_read_status,
		.ack_interrupt = &marvell_ack_interrupt,
		.config_intr = &marvell_config_intr,
		.driver = { .owner = THIS_MODULE },
	},
	{
		.phy_id = 0x01410cd0,
		.phy_id_mask = 0xfffffff0,
		.name = "Marvell 88E1145",
		.features = PHY_GBIT_FEATURES,
		.flags = PHY_HAS_INTERRUPT,
		.config_init = &m88e1145_config_init,
		.config_aneg = &marvell_config_aneg,
		.read_status = &genphy_read_status,
		.ack_interrupt = &marvell_ack_interrupt,
		.config_intr = &marvell_config_intr,
		.driver = { .owner = THIS_MODULE },
	},
	{
		.phy_id = 0x01410e30,
		.phy_id_mask = 0xfffffff0,
		.name = "Marvell 88E1240",
		.features = PHY_GBIT_FEATURES,
		.flags = PHY_HAS_INTERRUPT,
		.config_init = &m88e1111_config_init,
		.config_aneg = &marvell_config_aneg,
		.read_status = &genphy_read_status,
		.ack_interrupt = &marvell_ack_interrupt,
		.config_intr = &marvell_config_intr,
		.driver = { .owner = THIS_MODULE },
	},
};

static int __init marvell_init(void)
{
	int ret;
	int i;

	for (i = 0; i < ARRAY_SIZE(marvell_drivers); i++) {
		ret = phy_driver_register(&marvell_drivers[i]);

		if (ret) {
			while (i-- > 0)
				phy_driver_unregister(&marvell_drivers[i]);
			return ret;
		}
	}

	return 0;
}

static void __exit marvell_exit(void)
{
	int i;

	for (i = 0; i < ARRAY_SIZE(marvell_drivers); i++)
		phy_driver_unregister(&marvell_drivers[i]);
}

module_init(marvell_init);
module_exit(marvell_exit);
Commit	Line	Data
00db8189 AF	1	/*
	2	* drivers/net/phy/marvell.c
	3	*
	4	* Driver for Marvell PHYs
	5	*
	6	* Author: Andy Fleming
	7	*
	8	* Copyright (c) 2004 Freescale Semiconductor, Inc.
	9	*
	10	* This program is free software; you can redistribute it and/or modify it
	11	* under the terms of the GNU General Public License as published by the
	12	* Free Software Foundation; either version 2 of the License, or (at your
	13	* option) any later version.
	14	*
	15	*/
00db8189	16	#include <linux/kernel.h>
00db8189 AF	17	#include <linux/string.h>
	18	#include <linux/errno.h>
	19	#include <linux/unistd.h>
	20	#include <linux/slab.h>
	21	#include <linux/interrupt.h>
	22	#include <linux/init.h>
	23	#include <linux/delay.h>
	24	#include <linux/netdevice.h>
	25	#include <linux/etherdevice.h>
	26	#include <linux/skbuff.h>
	27	#include <linux/spinlock.h>
	28	#include <linux/mm.h>
	29	#include <linux/module.h>
00db8189 AF	30	#include <linux/mii.h>
	31	#include <linux/ethtool.h>
	32	#include <linux/phy.h>
	33
	34	#include <asm/io.h>
	35	#include <asm/irq.h>
	36	#include <asm/uaccess.h>
	37
	38	#define MII_M1011_IEVENT 0x13
	39	#define MII_M1011_IEVENT_CLEAR 0x0000
	40
	41	#define MII_M1011_IMASK 0x12
	42	#define MII_M1011_IMASK_INIT 0x6400
	43	#define MII_M1011_IMASK_CLEAR 0x0000
	44
76884679 AF	45	#define MII_M1011_PHY_SCR 0x10
	46	#define MII_M1011_PHY_SCR_AUTO_CROSS 0x0060
	47
	48	#define MII_M1145_PHY_EXT_CR 0x14
	49	#define MII_M1145_RGMII_RX_DELAY 0x0080
	50	#define MII_M1145_RGMII_TX_DELAY 0x0002
	51
	52	#define M1145_DEV_FLAGS_RESISTANCE 0x00000001
	53
	54	#define MII_M1111_PHY_LED_CONTROL 0x18
	55	#define MII_M1111_PHY_LED_DIRECT 0x4100
	56	#define MII_M1111_PHY_LED_COMBINE 0x411c
895ee682 KP	57	#define MII_M1111_PHY_EXT_CR 0x14
	58	#define MII_M1111_RX_DELAY 0x80
	59	#define MII_M1111_TX_DELAY 0x2
	60	#define MII_M1111_PHY_EXT_SR 0x1b
be937f1f AS	61
	62	#define MII_M1111_HWCFG_MODE_MASK 0xf
	63	#define MII_M1111_HWCFG_MODE_COPPER_RGMII 0xb
	64	#define MII_M1111_HWCFG_MODE_FIBER_RGMII 0x3
4117b5be	65	#define MII_M1111_HWCFG_MODE_SGMII_NO_CLK 0x4
be937f1f AS	66	#define MII_M1111_HWCFG_FIBER_COPPER_AUTO 0x8000
	67	#define MII_M1111_HWCFG_FIBER_COPPER_RES 0x2000
	68
	69	#define MII_M1111_COPPER 0
	70	#define MII_M1111_FIBER 1
	71
	72	#define MII_M1011_PHY_STATUS 0x11
	73	#define MII_M1011_PHY_STATUS_1000 0x8000
	74	#define MII_M1011_PHY_STATUS_100 0x4000
	75	#define MII_M1011_PHY_STATUS_SPD_MASK 0xc000
	76	#define MII_M1011_PHY_STATUS_FULLDUPLEX 0x2000
	77	#define MII_M1011_PHY_STATUS_RESOLVED 0x0800
	78	#define MII_M1011_PHY_STATUS_LINK 0x0400
	79
76884679	80
00db8189 AF	81	MODULE_DESCRIPTION("Marvell PHY driver");
	82	MODULE_AUTHOR("Andy Fleming");
	83	MODULE_LICENSE("GPL");
	84
	85	static int marvell_ack_interrupt(struct phy_device *phydev)
	86	{
	87	int err;
	88
	89	/* Clear the interrupts by reading the reg */
	90	err = phy_read(phydev, MII_M1011_IEVENT);
	91
	92	if (err < 0)
	93	return err;
	94
	95	return 0;
	96	}
	97
	98	static int marvell_config_intr(struct phy_device *phydev)
	99	{
	100	int err;
	101
76884679	102	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
00db8189 AF	103	err = phy_write(phydev, MII_M1011_IMASK, MII_M1011_IMASK_INIT);
	104	else
	105	err = phy_write(phydev, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR);
	106
	107	return err;
	108	}
	109
	110	static int marvell_config_aneg(struct phy_device *phydev)
	111	{
	112	int err;
	113
	114	/* The Marvell PHY has an errata which requires
	115	* that certain registers get written in order
	116	* to restart autonegotiation */
	117	err = phy_write(phydev, MII_BMCR, BMCR_RESET);
	118
	119	if (err < 0)
	120	return err;
	121
	122	err = phy_write(phydev, 0x1d, 0x1f);
	123	if (err < 0)
	124	return err;
	125
	126	err = phy_write(phydev, 0x1e, 0x200c);
	127	if (err < 0)
	128	return err;
	129
	130	err = phy_write(phydev, 0x1d, 0x5);
	131	if (err < 0)
	132	return err;
	133
	134	err = phy_write(phydev, 0x1e, 0);
	135	if (err < 0)
	136	return err;
	137
	138	err = phy_write(phydev, 0x1e, 0x100);
	139	if (err < 0)
	140	return err;
	141
76884679 AF	142	err = phy_write(phydev, MII_M1011_PHY_SCR,
	143	MII_M1011_PHY_SCR_AUTO_CROSS);
	144	if (err < 0)
	145	return err;
	146
	147	err = phy_write(phydev, MII_M1111_PHY_LED_CONTROL,
	148	MII_M1111_PHY_LED_DIRECT);
	149	if (err < 0)
	150	return err;
00db8189 AF	151
	152	err = genphy_config_aneg(phydev);
	153
	154	return err;
	155	}
	156
895ee682 KP	157	static int m88e1111_config_init(struct phy_device *phydev)
	158	{
	159	int err;
be937f1f AS	160	int temp;
	161	int mode;
	162
	163	/* Enable Fiber/Copper auto selection */
	164	temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
9cf8fa43	165	temp &= ~MII_M1111_HWCFG_FIBER_COPPER_AUTO;
be937f1f AS	166	phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
	167
	168	temp = phy_read(phydev, MII_BMCR);
	169	temp \|= BMCR_RESET;
	170	phy_write(phydev, MII_BMCR, temp);
895ee682 KP	171
895ee682 KP	172	if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) \|\|
9daf5a76 KP	173	(phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) \|\|
	174	(phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) \|\|
	175	(phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)) {
895ee682	176
9daf5a76 KP	177	temp = phy_read(phydev, MII_M1111_PHY_EXT_CR);
	178	if (temp < 0)
	179	return temp;
895ee682	180
9daf5a76	181	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
895ee682	182	temp \|= (MII_M1111_RX_DELAY \| MII_M1111_TX_DELAY);
9daf5a76 KP	183	} else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
	184	temp &= ~MII_M1111_TX_DELAY;
	185	temp \|= MII_M1111_RX_DELAY;
	186	} else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
	187	temp &= ~MII_M1111_RX_DELAY;
	188	temp \|= MII_M1111_TX_DELAY;
895ee682 KP	189	}
895ee682 KP	190
9daf5a76 KP	191	err = phy_write(phydev, MII_M1111_PHY_EXT_CR, temp);
	192	if (err < 0)
	193	return err;
	194
895ee682 KP	195	temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
	196	if (temp < 0)
	197	return temp;
	198
	199	temp &= ~(MII_M1111_HWCFG_MODE_MASK);
be937f1f AS	200
	201	mode = phy_read(phydev, MII_M1111_PHY_EXT_CR);
	202
	203	if (mode & MII_M1111_HWCFG_FIBER_COPPER_RES)
	204	temp \|= MII_M1111_HWCFG_MODE_FIBER_RGMII;
	205	else
	206	temp \|= MII_M1111_HWCFG_MODE_COPPER_RGMII;
895ee682 KP	207
	208	err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
	209	if (err < 0)
	210	return err;
	211	}
	212
4117b5be	213	if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
4117b5be KJ	214	temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
	215	if (temp < 0)
	216	return temp;
	217
	218	temp &= ~(MII_M1111_HWCFG_MODE_MASK);
	219	temp \|= MII_M1111_HWCFG_MODE_SGMII_NO_CLK;
	220
	221	err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
	222	if (err < 0)
	223	return err;
	224	}
	225
895ee682 KP	226	err = phy_write(phydev, MII_BMCR, BMCR_RESET);
	227	if (err < 0)
	228	return err;
	229
	230	return 0;
	231	}
	232
76884679 AF	233	static int m88e1145_config_init(struct phy_device *phydev)
	234	{
	235	int err;
	236
	237	/* Take care of errata E0 & E1 */
	238	err = phy_write(phydev, 0x1d, 0x001b);
	239	if (err < 0)
	240	return err;
	241
	242	err = phy_write(phydev, 0x1e, 0x418f);
	243	if (err < 0)
	244	return err;
	245
	246	err = phy_write(phydev, 0x1d, 0x0016);
	247	if (err < 0)
	248	return err;
	249
	250	err = phy_write(phydev, 0x1e, 0xa2da);
	251	if (err < 0)
	252	return err;
	253
895ee682	254	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
76884679 AF	255	int temp = phy_read(phydev, MII_M1145_PHY_EXT_CR);
	256	if (temp < 0)
	257	return temp;
	258
	259	temp \|= (MII_M1145_RGMII_RX_DELAY \| MII_M1145_RGMII_TX_DELAY);
	260
	261	err = phy_write(phydev, MII_M1145_PHY_EXT_CR, temp);
	262	if (err < 0)
	263	return err;
	264
	265	if (phydev->dev_flags & M1145_DEV_FLAGS_RESISTANCE) {
	266	err = phy_write(phydev, 0x1d, 0x0012);
	267	if (err < 0)
	268	return err;
	269
	270	temp = phy_read(phydev, 0x1e);
	271	if (temp < 0)
	272	return temp;
	273
	274	temp &= 0xf03f;
	275	temp \|= 2 << 9; /* 36 ohm */
	276	temp \|= 2 << 6; /* 39 ohm */
	277
	278	err = phy_write(phydev, 0x1e, temp);
	279	if (err < 0)
	280	return err;
	281
	282	err = phy_write(phydev, 0x1d, 0x3);
	283	if (err < 0)
	284	return err;
	285
	286	err = phy_write(phydev, 0x1e, 0x8000);
	287	if (err < 0)
	288	return err;
	289	}
	290	}
	291
	292	return 0;
	293	}
00db8189	294
be937f1f AS	295	/* marvell_read_status
	296	*
	297	* Generic status code does not detect Fiber correctly!
f0c88f9c	298	* Description:
be937f1f AS	299	* Check the link, then figure out the current state
	300	* by comparing what we advertise with what the link partner
	301	* advertises. Start by checking the gigabit possibilities,
	302	* then move on to 10/100.
	303	*/
	304	static int marvell_read_status(struct phy_device *phydev)
	305	{
	306	int adv;
	307	int err;
	308	int lpa;
	309	int status = 0;
	310
	311	/* Update the link, but return if there
	312	* was an error */
	313	err = genphy_update_link(phydev);
	314	if (err)
	315	return err;
	316
	317	if (AUTONEG_ENABLE == phydev->autoneg) {
	318	status = phy_read(phydev, MII_M1011_PHY_STATUS);
	319	if (status < 0)
	320	return status;
	321
	322	lpa = phy_read(phydev, MII_LPA);
	323	if (lpa < 0)
	324	return lpa;
	325
	326	adv = phy_read(phydev, MII_ADVERTISE);
	327	if (adv < 0)
	328	return adv;
	329
	330	lpa &= adv;
	331
	332	if (status & MII_M1011_PHY_STATUS_FULLDUPLEX)
	333	phydev->duplex = DUPLEX_FULL;
	334	else
	335	phydev->duplex = DUPLEX_HALF;
	336
	337	status = status & MII_M1011_PHY_STATUS_SPD_MASK;
	338	phydev->pause = phydev->asym_pause = 0;
	339
	340	switch (status) {
	341	case MII_M1011_PHY_STATUS_1000:
	342	phydev->speed = SPEED_1000;
	343	break;
	344
	345	case MII_M1011_PHY_STATUS_100:
	346	phydev->speed = SPEED_100;
	347	break;
	348
	349	default:
	350	phydev->speed = SPEED_10;
	351	break;
	352	}
	353
	354	if (phydev->duplex == DUPLEX_FULL) {
	355	phydev->pause = lpa & LPA_PAUSE_CAP ? 1 : 0;
	356	phydev->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0;
	357	}
	358	} else {
	359	int bmcr = phy_read(phydev, MII_BMCR);
	360
	361	if (bmcr < 0)
	362	return bmcr;
363
364	if (bmcr & BMCR_FULLDPLX)
365	phydev->duplex = DUPLEX_FULL;
366	else
367	phydev->duplex = DUPLEX_HALF;
368
369	if (bmcr & BMCR_SPEED1000)
370	phydev->speed = SPEED_1000;
371	else if (bmcr & BMCR_SPEED100)
372	phydev->speed = SPEED_100;
373	else
374	phydev->speed = SPEED_10;
375
376	phydev->pause = phydev->asym_pause = 0;
377	}
378
379	return 0;
380	}
381
e5479239 OJ	382	static struct phy_driver marvell_drivers[] = {
	383	{
	384	.phy_id = 0x01410c60,
	385	.phy_id_mask = 0xfffffff0,
	386	.name = "Marvell 88E1101",
	387	.features = PHY_GBIT_FEATURES,
	388	.flags = PHY_HAS_INTERRUPT,
	389	.config_aneg = &marvell_config_aneg,
	390	.read_status = &genphy_read_status,
	391	.ack_interrupt = &marvell_ack_interrupt,
	392	.config_intr = &marvell_config_intr,
ac8c635a	393	.driver = { .owner = THIS_MODULE },
e5479239	394	},
85cfb534 OJ	395	{
	396	.phy_id = 0x01410c90,
	397	.phy_id_mask = 0xfffffff0,
	398	.name = "Marvell 88E1112",
	399	.features = PHY_GBIT_FEATURES,
	400	.flags = PHY_HAS_INTERRUPT,
	401	.config_init = &m88e1111_config_init,
	402	.config_aneg = &marvell_config_aneg,
	403	.read_status = &genphy_read_status,
	404	.ack_interrupt = &marvell_ack_interrupt,
	405	.config_intr = &marvell_config_intr,
ac8c635a	406	.driver = { .owner = THIS_MODULE },
85cfb534	407	},
e5479239 OJ	408	{
	409	.phy_id = 0x01410cc0,
	410	.phy_id_mask = 0xfffffff0,
	411	.name = "Marvell 88E1111",
	412	.features = PHY_GBIT_FEATURES,
	413	.flags = PHY_HAS_INTERRUPT,
	414	.config_init = &m88e1111_config_init,
	415	.config_aneg = &marvell_config_aneg,
be937f1f	416	.read_status = &marvell_read_status,
e5479239 OJ	417	.ack_interrupt = &marvell_ack_interrupt,
e5479239 OJ	418	.config_intr = &marvell_config_intr,
ac8c635a	419	.driver = { .owner = THIS_MODULE },
e5479239 OJ	420	},
	421	{
	422	.phy_id = 0x01410cd0,
	423	.phy_id_mask = 0xfffffff0,
	424	.name = "Marvell 88E1145",
	425	.features = PHY_GBIT_FEATURES,
	426	.flags = PHY_HAS_INTERRUPT,
	427	.config_init = &m88e1145_config_init,
	428	.config_aneg = &marvell_config_aneg,
	429	.read_status = &genphy_read_status,
	430	.ack_interrupt = &marvell_ack_interrupt,
	431	.config_intr = &marvell_config_intr,
ac8c635a OJ	432	.driver = { .owner = THIS_MODULE },
	433	},
	434	{
	435	.phy_id = 0x01410e30,
	436	.phy_id_mask = 0xfffffff0,
	437	.name = "Marvell 88E1240",
	438	.features = PHY_GBIT_FEATURES,
	439	.flags = PHY_HAS_INTERRUPT,
	440	.config_init = &m88e1111_config_init,
	441	.config_aneg = &marvell_config_aneg,
	442	.read_status = &genphy_read_status,
	443	.ack_interrupt = &marvell_ack_interrupt,
	444	.config_intr = &marvell_config_intr,
	445	.driver = { .owner = THIS_MODULE },
	446	},
00db8189 AF	447	};
	448
	449	static int __init marvell_init(void)
	450	{
76884679	451	int ret;
e5479239	452	int i;
76884679	453
e5479239 OJ	454	for (i = 0; i < ARRAY_SIZE(marvell_drivers); i++) {
e5479239 OJ	455	ret = phy_driver_register(&marvell_drivers[i]);
76884679	456
e5479239 OJ	457	if (ret) {
	458	while (i-- > 0)
	459	phy_driver_unregister(&marvell_drivers[i]);
	460	return ret;
	461	}
	462	}
76884679 AF	463
76884679 AF	464	return 0;
00db8189 AF	465	}
	466
	467	static void __exit marvell_exit(void)
	468	{
e5479239 OJ	469	int i;
	470
	471	for (i = 0; i < ARRAY_SIZE(marvell_drivers); i++)
	472	phy_driver_unregister(&marvell_drivers[i]);
00db8189 AF	473	}
	474
	475	module_init(marvell_init);
	476	module_exit(marvell_exit);