Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* starfire.c: Linux device driver for the Adaptec Starfire network adapter. */ |
2 | /* | |
3 | Written 1998-2000 by Donald Becker. | |
4 | ||
fdecea66 | 5 | Current maintainer is Ion Badulescu <ionut ta badula tod org>. Please |
1da177e4 LT |
6 | send all bug reports to me, and not to Donald Becker, as this code |
7 | has been heavily modified from Donald's original version. | |
8 | ||
9 | This software may be used and distributed according to the terms of | |
10 | the GNU General Public License (GPL), incorporated herein by reference. | |
11 | Drivers based on or derived from this code fall under the GPL and must | |
12 | retain the authorship, copyright and license notice. This file is not | |
13 | a complete program and may only be used when the entire operating | |
14 | system is licensed under the GPL. | |
15 | ||
16 | The information below comes from Donald Becker's original driver: | |
17 | ||
18 | The author may be reached as becker@scyld.com, or C/O | |
19 | Scyld Computing Corporation | |
20 | 410 Severn Ave., Suite 210 | |
21 | Annapolis MD 21403 | |
22 | ||
23 | Support and updates available at | |
24 | http://www.scyld.com/network/starfire.html | |
25 | ||
26 | ----------------------------------------------------------- | |
27 | ||
28 | Linux kernel-specific changes: | |
29 | ||
30 | LK1.1.1 (jgarzik): | |
31 | - Use PCI driver interface | |
32 | - Fix MOD_xxx races | |
33 | - softnet fixups | |
34 | ||
35 | LK1.1.2 (jgarzik): | |
36 | - Merge Becker version 0.15 | |
37 | ||
38 | LK1.1.3 (Andrew Morton) | |
39 | - Timer cleanups | |
40 | ||
41 | LK1.1.4 (jgarzik): | |
42 | - Merge Becker version 1.03 | |
43 | ||
44 | LK1.2.1 (Ion Badulescu <ionut@cs.columbia.edu>) | |
45 | - Support hardware Rx/Tx checksumming | |
46 | - Use the GFP firmware taken from Adaptec's Netware driver | |
47 | ||
48 | LK1.2.2 (Ion Badulescu) | |
49 | - Backported to 2.2.x | |
50 | ||
51 | LK1.2.3 (Ion Badulescu) | |
52 | - Fix the flaky mdio interface | |
53 | - More compat clean-ups | |
54 | ||
55 | LK1.2.4 (Ion Badulescu) | |
56 | - More 2.2.x initialization fixes | |
57 | ||
58 | LK1.2.5 (Ion Badulescu) | |
59 | - Several fixes from Manfred Spraul | |
60 | ||
61 | LK1.2.6 (Ion Badulescu) | |
62 | - Fixed ifup/ifdown/ifup problem in 2.4.x | |
63 | ||
64 | LK1.2.7 (Ion Badulescu) | |
65 | - Removed unused code | |
66 | - Made more functions static and __init | |
67 | ||
68 | LK1.2.8 (Ion Badulescu) | |
69 | - Quell bogus error messages, inform about the Tx threshold | |
70 | - Removed #ifdef CONFIG_PCI, this driver is PCI only | |
71 | ||
72 | LK1.2.9 (Ion Badulescu) | |
73 | - Merged Jeff Garzik's changes from 2.4.4-pre5 | |
74 | - Added 2.2.x compatibility stuff required by the above changes | |
75 | ||
76 | LK1.2.9a (Ion Badulescu) | |
77 | - More updates from Jeff Garzik | |
78 | ||
79 | LK1.3.0 (Ion Badulescu) | |
80 | - Merged zerocopy support | |
81 | ||
82 | LK1.3.1 (Ion Badulescu) | |
83 | - Added ethtool support | |
84 | - Added GPIO (media change) interrupt support | |
85 | ||
86 | LK1.3.2 (Ion Badulescu) | |
87 | - Fixed 2.2.x compatibility issues introduced in 1.3.1 | |
88 | - Fixed ethtool ioctl returning uninitialized memory | |
89 | ||
90 | LK1.3.3 (Ion Badulescu) | |
91 | - Initialize the TxMode register properly | |
92 | - Don't dereference dev->priv after freeing it | |
93 | ||
94 | LK1.3.4 (Ion Badulescu) | |
95 | - Fixed initialization timing problems | |
96 | - Fixed interrupt mask definitions | |
97 | ||
98 | LK1.3.5 (jgarzik) | |
99 | - ethtool NWAY_RST, GLINK, [GS]MSGLVL support | |
100 | ||
101 | LK1.3.6: | |
102 | - Sparc64 support and fixes (Ion Badulescu) | |
103 | - Better stats and error handling (Ion Badulescu) | |
104 | - Use new pci_set_mwi() PCI API function (jgarzik) | |
105 | ||
106 | LK1.3.7 (Ion Badulescu) | |
107 | - minimal implementation of tx_timeout() | |
108 | - correctly shutdown the Rx/Tx engines in netdev_close() | |
109 | - added calls to netif_carrier_on/off | |
110 | (patch from Stefan Rompf <srompf@isg.de>) | |
111 | - VLAN support | |
112 | ||
113 | LK1.3.8 (Ion Badulescu) | |
114 | - adjust DMA burst size on sparc64 | |
115 | - 64-bit support | |
116 | - reworked zerocopy support for 64-bit buffers | |
117 | - working and usable interrupt mitigation/latency | |
118 | - reduced Tx interrupt frequency for lower interrupt overhead | |
119 | ||
120 | LK1.3.9 (Ion Badulescu) | |
121 | - bugfix for mcast filter | |
122 | - enable the right kind of Tx interrupts (TxDMADone, not TxDone) | |
123 | ||
124 | LK1.4.0 (Ion Badulescu) | |
125 | - NAPI support | |
126 | ||
127 | LK1.4.1 (Ion Badulescu) | |
128 | - flush PCI posting buffers after disabling Rx interrupts | |
129 | - put the chip to a D3 slumber on driver unload | |
130 | - added config option to enable/disable NAPI | |
131 | ||
fdecea66 JG |
132 | LK1.4.2 (Ion Badulescu) |
133 | - finally added firmware (GPL'ed by Adaptec) | |
134 | - removed compatibility code for 2.2.x | |
135 | ||
67974231 IB |
136 | LK1.4.2.1 (Ion Badulescu) |
137 | - fixed 32/64 bit issues on i386 + CONFIG_HIGHMEM | |
138 | - added 32-bit padding to outgoing skb's, removed previous workaround | |
139 | ||
fdecea66 JG |
140 | TODO: - fix forced speed/duplexing code (broken a long time ago, when |
141 | somebody converted the driver to use the generic MII code) | |
142 | - fix VLAN support | |
1da177e4 LT |
143 | */ |
144 | ||
145 | #define DRV_NAME "starfire" | |
67974231 IB |
146 | #define DRV_VERSION "1.03+LK1.4.2.1" |
147 | #define DRV_RELDATE "October 3, 2005" | |
1da177e4 LT |
148 | |
149 | #include <linux/config.h> | |
1da177e4 LT |
150 | #include <linux/module.h> |
151 | #include <linux/kernel.h> | |
152 | #include <linux/pci.h> | |
153 | #include <linux/netdevice.h> | |
154 | #include <linux/etherdevice.h> | |
155 | #include <linux/init.h> | |
156 | #include <linux/delay.h> | |
fdecea66 JG |
157 | #include <linux/crc32.h> |
158 | #include <linux/ethtool.h> | |
159 | #include <linux/mii.h> | |
160 | #include <linux/if_vlan.h> | |
1da177e4 LT |
161 | #include <asm/processor.h> /* Processor type for cache alignment. */ |
162 | #include <asm/uaccess.h> | |
163 | #include <asm/io.h> | |
164 | ||
fdecea66 | 165 | #include "starfire_firmware.h" |
1da177e4 LT |
166 | /* |
167 | * The current frame processor firmware fails to checksum a fragment | |
168 | * of length 1. If and when this is fixed, the #define below can be removed. | |
169 | */ | |
170 | #define HAS_BROKEN_FIRMWARE | |
67974231 IB |
171 | |
172 | /* | |
173 | * If using the broken firmware, data must be padded to the next 32-bit boundary. | |
174 | */ | |
175 | #ifdef HAS_BROKEN_FIRMWARE | |
176 | #define PADDING_MASK 3 | |
177 | #endif | |
178 | ||
1da177e4 LT |
179 | /* |
180 | * Define this if using the driver with the zero-copy patch | |
181 | */ | |
1da177e4 | 182 | #define ZEROCOPY |
1da177e4 LT |
183 | |
184 | #if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) | |
185 | #define VLAN_SUPPORT | |
186 | #endif | |
187 | ||
188 | #ifndef CONFIG_ADAPTEC_STARFIRE_NAPI | |
189 | #undef HAVE_NETDEV_POLL | |
190 | #endif | |
191 | ||
192 | /* The user-configurable values. | |
193 | These may be modified when a driver module is loaded.*/ | |
194 | ||
195 | /* Used for tuning interrupt latency vs. overhead. */ | |
196 | static int intr_latency; | |
197 | static int small_frames; | |
198 | ||
199 | static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */ | |
200 | static int max_interrupt_work = 20; | |
201 | static int mtu; | |
202 | /* Maximum number of multicast addresses to filter (vs. rx-all-multicast). | |
203 | The Starfire has a 512 element hash table based on the Ethernet CRC. */ | |
204 | static int multicast_filter_limit = 512; | |
205 | /* Whether to do TCP/UDP checksums in hardware */ | |
1da177e4 | 206 | static int enable_hw_cksum = 1; |
1da177e4 LT |
207 | |
208 | #define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/ | |
209 | /* | |
210 | * Set the copy breakpoint for the copy-only-tiny-frames scheme. | |
211 | * Setting to > 1518 effectively disables this feature. | |
212 | * | |
213 | * NOTE: | |
214 | * The ia64 doesn't allow for unaligned loads even of integers being | |
215 | * misaligned on a 2 byte boundary. Thus always force copying of | |
216 | * packets as the starfire doesn't allow for misaligned DMAs ;-( | |
217 | * 23/10/2000 - Jes | |
218 | * | |
219 | * The Alpha and the Sparc don't like unaligned loads, either. On Sparc64, | |
220 | * at least, having unaligned frames leads to a rather serious performance | |
221 | * penalty. -Ion | |
222 | */ | |
223 | #if defined(__ia64__) || defined(__alpha__) || defined(__sparc__) | |
224 | static int rx_copybreak = PKT_BUF_SZ; | |
225 | #else | |
226 | static int rx_copybreak /* = 0 */; | |
227 | #endif | |
228 | ||
229 | /* PCI DMA burst size -- on sparc64 we want to force it to 64 bytes, on the others the default of 128 is fine. */ | |
230 | #ifdef __sparc__ | |
231 | #define DMA_BURST_SIZE 64 | |
232 | #else | |
233 | #define DMA_BURST_SIZE 128 | |
234 | #endif | |
235 | ||
236 | /* Used to pass the media type, etc. | |
237 | Both 'options[]' and 'full_duplex[]' exist for driver interoperability. | |
238 | The media type is usually passed in 'options[]'. | |
239 | These variables are deprecated, use ethtool instead. -Ion | |
240 | */ | |
241 | #define MAX_UNITS 8 /* More are supported, limit only on options */ | |
242 | static int options[MAX_UNITS] = {0, }; | |
243 | static int full_duplex[MAX_UNITS] = {0, }; | |
244 | ||
245 | /* Operational parameters that are set at compile time. */ | |
246 | ||
247 | /* The "native" ring sizes are either 256 or 2048. | |
248 | However in some modes a descriptor may be marked to wrap the ring earlier. | |
249 | */ | |
250 | #define RX_RING_SIZE 256 | |
251 | #define TX_RING_SIZE 32 | |
252 | /* The completion queues are fixed at 1024 entries i.e. 4K or 8KB. */ | |
253 | #define DONE_Q_SIZE 1024 | |
254 | /* All queues must be aligned on a 256-byte boundary */ | |
255 | #define QUEUE_ALIGN 256 | |
256 | ||
257 | #if RX_RING_SIZE > 256 | |
258 | #define RX_Q_ENTRIES Rx2048QEntries | |
259 | #else | |
260 | #define RX_Q_ENTRIES Rx256QEntries | |
261 | #endif | |
262 | ||
263 | /* Operational parameters that usually are not changed. */ | |
264 | /* Time in jiffies before concluding the transmitter is hung. */ | |
265 | #define TX_TIMEOUT (2 * HZ) | |
266 | ||
267 | /* | |
268 | * This SUCKS. | |
269 | * We need a much better method to determine if dma_addr_t is 64-bit. | |
270 | */ | |
67974231 | 271 | #if (defined(__i386__) && defined(CONFIG_HIGHMEM64G)) || defined(__x86_64__) || defined (__ia64__) || defined(__mips64__) || (defined(__mips__) && defined(CONFIG_HIGHMEM) && defined(CONFIG_64BIT_PHYS_ADDR)) |
1da177e4 LT |
272 | /* 64-bit dma_addr_t */ |
273 | #define ADDR_64BITS /* This chip uses 64 bit addresses. */ | |
67974231 | 274 | #define netdrv_addr_t u64 |
1da177e4 LT |
275 | #define cpu_to_dma(x) cpu_to_le64(x) |
276 | #define dma_to_cpu(x) le64_to_cpu(x) | |
277 | #define RX_DESC_Q_ADDR_SIZE RxDescQAddr64bit | |
278 | #define TX_DESC_Q_ADDR_SIZE TxDescQAddr64bit | |
279 | #define RX_COMPL_Q_ADDR_SIZE RxComplQAddr64bit | |
280 | #define TX_COMPL_Q_ADDR_SIZE TxComplQAddr64bit | |
281 | #define RX_DESC_ADDR_SIZE RxDescAddr64bit | |
282 | #else /* 32-bit dma_addr_t */ | |
67974231 | 283 | #define netdrv_addr_t u32 |
1da177e4 LT |
284 | #define cpu_to_dma(x) cpu_to_le32(x) |
285 | #define dma_to_cpu(x) le32_to_cpu(x) | |
286 | #define RX_DESC_Q_ADDR_SIZE RxDescQAddr32bit | |
287 | #define TX_DESC_Q_ADDR_SIZE TxDescQAddr32bit | |
288 | #define RX_COMPL_Q_ADDR_SIZE RxComplQAddr32bit | |
289 | #define TX_COMPL_Q_ADDR_SIZE TxComplQAddr32bit | |
290 | #define RX_DESC_ADDR_SIZE RxDescAddr32bit | |
291 | #endif | |
292 | ||
1da177e4 LT |
293 | #define skb_first_frag_len(skb) skb_headlen(skb) |
294 | #define skb_num_frags(skb) (skb_shinfo(skb)->nr_frags + 1) | |
1da177e4 LT |
295 | |
296 | #ifdef HAVE_NETDEV_POLL | |
297 | #define init_poll(dev) \ | |
fdecea66 | 298 | do { \ |
1da177e4 | 299 | dev->poll = &netdev_poll; \ |
fdecea66 JG |
300 | dev->weight = max_interrupt_work; \ |
301 | } while (0) | |
1da177e4 LT |
302 | #define netdev_rx(dev, ioaddr) \ |
303 | do { \ | |
304 | u32 intr_enable; \ | |
305 | if (netif_rx_schedule_prep(dev)) { \ | |
306 | __netif_rx_schedule(dev); \ | |
307 | intr_enable = readl(ioaddr + IntrEnable); \ | |
308 | intr_enable &= ~(IntrRxDone | IntrRxEmpty); \ | |
309 | writel(intr_enable, ioaddr + IntrEnable); \ | |
310 | readl(ioaddr + IntrEnable); /* flush PCI posting buffers */ \ | |
311 | } else { \ | |
312 | /* Paranoia check */ \ | |
313 | intr_enable = readl(ioaddr + IntrEnable); \ | |
314 | if (intr_enable & (IntrRxDone | IntrRxEmpty)) { \ | |
fdecea66 | 315 | printk(KERN_INFO "%s: interrupt while in polling mode!\n", dev->name); \ |
1da177e4 LT |
316 | intr_enable &= ~(IntrRxDone | IntrRxEmpty); \ |
317 | writel(intr_enable, ioaddr + IntrEnable); \ | |
318 | } \ | |
319 | } \ | |
320 | } while (0) | |
321 | #define netdev_receive_skb(skb) netif_receive_skb(skb) | |
322 | #define vlan_netdev_receive_skb(skb, vlgrp, vlid) vlan_hwaccel_receive_skb(skb, vlgrp, vlid) | |
323 | static int netdev_poll(struct net_device *dev, int *budget); | |
324 | #else /* not HAVE_NETDEV_POLL */ | |
325 | #define init_poll(dev) | |
326 | #define netdev_receive_skb(skb) netif_rx(skb) | |
327 | #define vlan_netdev_receive_skb(skb, vlgrp, vlid) vlan_hwaccel_rx(skb, vlgrp, vlid) | |
328 | #define netdev_rx(dev, ioaddr) \ | |
329 | do { \ | |
330 | int quota = np->dirty_rx + RX_RING_SIZE - np->cur_rx; \ | |
331 | __netdev_rx(dev, "a);\ | |
332 | } while (0) | |
333 | #endif /* not HAVE_NETDEV_POLL */ | |
334 | /* end of compatibility code */ | |
335 | ||
336 | ||
337 | /* These identify the driver base version and may not be removed. */ | |
338 | static char version[] __devinitdata = | |
339 | KERN_INFO "starfire.c:v1.03 7/26/2000 Written by Donald Becker <becker@scyld.com>\n" | |
340 | KERN_INFO " (unofficial 2.2/2.4 kernel port, version " DRV_VERSION ", " DRV_RELDATE ")\n"; | |
341 | ||
342 | MODULE_AUTHOR("Donald Becker <becker@scyld.com>"); | |
343 | MODULE_DESCRIPTION("Adaptec Starfire Ethernet driver"); | |
344 | MODULE_LICENSE("GPL"); | |
fdecea66 | 345 | MODULE_VERSION(DRV_VERSION); |
1da177e4 LT |
346 | |
347 | module_param(max_interrupt_work, int, 0); | |
348 | module_param(mtu, int, 0); | |
349 | module_param(debug, int, 0); | |
350 | module_param(rx_copybreak, int, 0); | |
351 | module_param(intr_latency, int, 0); | |
352 | module_param(small_frames, int, 0); | |
353 | module_param_array(options, int, NULL, 0); | |
354 | module_param_array(full_duplex, int, NULL, 0); | |
355 | module_param(enable_hw_cksum, int, 0); | |
356 | MODULE_PARM_DESC(max_interrupt_work, "Maximum events handled per interrupt"); | |
357 | MODULE_PARM_DESC(mtu, "MTU (all boards)"); | |
358 | MODULE_PARM_DESC(debug, "Debug level (0-6)"); | |
359 | MODULE_PARM_DESC(rx_copybreak, "Copy breakpoint for copy-only-tiny-frames"); | |
360 | MODULE_PARM_DESC(intr_latency, "Maximum interrupt latency, in microseconds"); | |
361 | MODULE_PARM_DESC(small_frames, "Maximum size of receive frames that bypass interrupt latency (0,64,128,256,512)"); | |
362 | MODULE_PARM_DESC(options, "Deprecated: Bits 0-3: media type, bit 17: full duplex"); | |
363 | MODULE_PARM_DESC(full_duplex, "Deprecated: Forced full-duplex setting (0/1)"); | |
364 | MODULE_PARM_DESC(enable_hw_cksum, "Enable/disable hardware cksum support (0/1)"); | |
365 | ||
366 | /* | |
367 | Theory of Operation | |
368 | ||
369 | I. Board Compatibility | |
370 | ||
371 | This driver is for the Adaptec 6915 "Starfire" 64 bit PCI Ethernet adapter. | |
372 | ||
373 | II. Board-specific settings | |
374 | ||
375 | III. Driver operation | |
376 | ||
377 | IIIa. Ring buffers | |
378 | ||
379 | The Starfire hardware uses multiple fixed-size descriptor queues/rings. The | |
380 | ring sizes are set fixed by the hardware, but may optionally be wrapped | |
381 | earlier by the END bit in the descriptor. | |
382 | This driver uses that hardware queue size for the Rx ring, where a large | |
383 | number of entries has no ill effect beyond increases the potential backlog. | |
384 | The Tx ring is wrapped with the END bit, since a large hardware Tx queue | |
385 | disables the queue layer priority ordering and we have no mechanism to | |
386 | utilize the hardware two-level priority queue. When modifying the | |
387 | RX/TX_RING_SIZE pay close attention to page sizes and the ring-empty warning | |
388 | levels. | |
389 | ||
390 | IIIb/c. Transmit/Receive Structure | |
391 | ||
392 | See the Adaptec manual for the many possible structures, and options for | |
393 | each structure. There are far too many to document all of them here. | |
394 | ||
395 | For transmit this driver uses type 0/1 transmit descriptors (depending | |
396 | on the 32/64 bitness of the architecture), and relies on automatic | |
397 | minimum-length padding. It does not use the completion queue | |
398 | consumer index, but instead checks for non-zero status entries. | |
399 | ||
fdecea66 | 400 | For receive this driver uses type 2/3 receive descriptors. The driver |
1da177e4 LT |
401 | allocates full frame size skbuffs for the Rx ring buffers, so all frames |
402 | should fit in a single descriptor. The driver does not use the completion | |
403 | queue consumer index, but instead checks for non-zero status entries. | |
404 | ||
405 | When an incoming frame is less than RX_COPYBREAK bytes long, a fresh skbuff | |
406 | is allocated and the frame is copied to the new skbuff. When the incoming | |
407 | frame is larger, the skbuff is passed directly up the protocol stack. | |
408 | Buffers consumed this way are replaced by newly allocated skbuffs in a later | |
409 | phase of receive. | |
410 | ||
411 | A notable aspect of operation is that unaligned buffers are not permitted by | |
412 | the Starfire hardware. Thus the IP header at offset 14 in an ethernet frame | |
413 | isn't longword aligned, which may cause problems on some machine | |
414 | e.g. Alphas and IA64. For these architectures, the driver is forced to copy | |
415 | the frame into a new skbuff unconditionally. Copied frames are put into the | |
416 | skbuff at an offset of "+2", thus 16-byte aligning the IP header. | |
417 | ||
418 | IIId. Synchronization | |
419 | ||
420 | The driver runs as two independent, single-threaded flows of control. One | |
421 | is the send-packet routine, which enforces single-threaded use by the | |
422 | dev->tbusy flag. The other thread is the interrupt handler, which is single | |
423 | threaded by the hardware and interrupt handling software. | |
424 | ||
425 | The send packet thread has partial control over the Tx ring and the netif_queue | |
426 | status. If the number of free Tx slots in the ring falls below a certain number | |
427 | (currently hardcoded to 4), it signals the upper layer to stop the queue. | |
428 | ||
429 | The interrupt handler has exclusive control over the Rx ring and records stats | |
430 | from the Tx ring. After reaping the stats, it marks the Tx queue entry as | |
431 | empty by incrementing the dirty_tx mark. Iff the netif_queue is stopped and the | |
432 | number of free Tx slow is above the threshold, it signals the upper layer to | |
433 | restart the queue. | |
434 | ||
435 | IV. Notes | |
436 | ||
437 | IVb. References | |
438 | ||
439 | The Adaptec Starfire manuals, available only from Adaptec. | |
440 | http://www.scyld.com/expert/100mbps.html | |
441 | http://www.scyld.com/expert/NWay.html | |
442 | ||
443 | IVc. Errata | |
444 | ||
445 | - StopOnPerr is broken, don't enable | |
446 | - Hardware ethernet padding exposes random data, perform software padding | |
447 | instead (unverified -- works correctly for all the hardware I have) | |
448 | ||
449 | */ | |
450 | ||
fdecea66 | 451 | |
1da177e4 LT |
452 | |
453 | enum chip_capability_flags {CanHaveMII=1, }; | |
454 | ||
455 | enum chipset { | |
456 | CH_6915 = 0, | |
457 | }; | |
458 | ||
459 | static struct pci_device_id starfire_pci_tbl[] = { | |
460 | { 0x9004, 0x6915, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_6915 }, | |
461 | { 0, } | |
462 | }; | |
463 | MODULE_DEVICE_TABLE(pci, starfire_pci_tbl); | |
464 | ||
465 | /* A chip capabilities table, matching the CH_xxx entries in xxx_pci_tbl[] above. */ | |
466 | static struct chip_info { | |
467 | const char *name; | |
468 | int drv_flags; | |
469 | } netdrv_tbl[] __devinitdata = { | |
470 | { "Adaptec Starfire 6915", CanHaveMII }, | |
471 | }; | |
472 | ||
473 | ||
474 | /* Offsets to the device registers. | |
475 | Unlike software-only systems, device drivers interact with complex hardware. | |
476 | It's not useful to define symbolic names for every register bit in the | |
477 | device. The name can only partially document the semantics and make | |
478 | the driver longer and more difficult to read. | |
479 | In general, only the important configuration values or bits changed | |
480 | multiple times should be defined symbolically. | |
481 | */ | |
482 | enum register_offsets { | |
483 | PCIDeviceConfig=0x50040, GenCtrl=0x50070, IntrTimerCtrl=0x50074, | |
484 | IntrClear=0x50080, IntrStatus=0x50084, IntrEnable=0x50088, | |
485 | MIICtrl=0x52000, TxStationAddr=0x50120, EEPROMCtrl=0x51000, | |
486 | GPIOCtrl=0x5008C, TxDescCtrl=0x50090, | |
487 | TxRingPtr=0x50098, HiPriTxRingPtr=0x50094, /* Low and High priority. */ | |
488 | TxRingHiAddr=0x5009C, /* 64 bit address extension. */ | |
489 | TxProducerIdx=0x500A0, TxConsumerIdx=0x500A4, | |
490 | TxThreshold=0x500B0, | |
491 | CompletionHiAddr=0x500B4, TxCompletionAddr=0x500B8, | |
492 | RxCompletionAddr=0x500BC, RxCompletionQ2Addr=0x500C0, | |
493 | CompletionQConsumerIdx=0x500C4, RxDMACtrl=0x500D0, | |
494 | RxDescQCtrl=0x500D4, RxDescQHiAddr=0x500DC, RxDescQAddr=0x500E0, | |
495 | RxDescQIdx=0x500E8, RxDMAStatus=0x500F0, RxFilterMode=0x500F4, | |
496 | TxMode=0x55000, VlanType=0x55064, | |
497 | PerfFilterTable=0x56000, HashTable=0x56100, | |
498 | TxGfpMem=0x58000, RxGfpMem=0x5a000, | |
499 | }; | |
500 | ||
501 | /* | |
502 | * Bits in the interrupt status/mask registers. | |
503 | * Warning: setting Intr[Ab]NormalSummary in the IntrEnable register | |
504 | * enables all the interrupt sources that are or'ed into those status bits. | |
505 | */ | |
506 | enum intr_status_bits { | |
507 | IntrLinkChange=0xf0000000, IntrStatsMax=0x08000000, | |
508 | IntrAbnormalSummary=0x02000000, IntrGeneralTimer=0x01000000, | |
509 | IntrSoftware=0x800000, IntrRxComplQ1Low=0x400000, | |
510 | IntrTxComplQLow=0x200000, IntrPCI=0x100000, | |
511 | IntrDMAErr=0x080000, IntrTxDataLow=0x040000, | |
512 | IntrRxComplQ2Low=0x020000, IntrRxDescQ1Low=0x010000, | |
513 | IntrNormalSummary=0x8000, IntrTxDone=0x4000, | |
514 | IntrTxDMADone=0x2000, IntrTxEmpty=0x1000, | |
515 | IntrEarlyRxQ2=0x0800, IntrEarlyRxQ1=0x0400, | |
516 | IntrRxQ2Done=0x0200, IntrRxQ1Done=0x0100, | |
517 | IntrRxGFPDead=0x80, IntrRxDescQ2Low=0x40, | |
518 | IntrNoTxCsum=0x20, IntrTxBadID=0x10, | |
519 | IntrHiPriTxBadID=0x08, IntrRxGfp=0x04, | |
520 | IntrTxGfp=0x02, IntrPCIPad=0x01, | |
521 | /* not quite bits */ | |
522 | IntrRxDone=IntrRxQ2Done | IntrRxQ1Done, | |
523 | IntrRxEmpty=IntrRxDescQ1Low | IntrRxDescQ2Low, | |
524 | IntrNormalMask=0xff00, IntrAbnormalMask=0x3ff00fe, | |
525 | }; | |
526 | ||
527 | /* Bits in the RxFilterMode register. */ | |
528 | enum rx_mode_bits { | |
529 | AcceptBroadcast=0x04, AcceptAllMulticast=0x02, AcceptAll=0x01, | |
530 | AcceptMulticast=0x10, PerfectFilter=0x40, HashFilter=0x30, | |
531 | PerfectFilterVlan=0x80, MinVLANPrio=0xE000, VlanMode=0x0200, | |
532 | WakeupOnGFP=0x0800, | |
533 | }; | |
534 | ||
535 | /* Bits in the TxMode register */ | |
536 | enum tx_mode_bits { | |
537 | MiiSoftReset=0x8000, MIILoopback=0x4000, | |
538 | TxFlowEnable=0x0800, RxFlowEnable=0x0400, | |
539 | PadEnable=0x04, FullDuplex=0x02, HugeFrame=0x01, | |
540 | }; | |
541 | ||
542 | /* Bits in the TxDescCtrl register. */ | |
543 | enum tx_ctrl_bits { | |
544 | TxDescSpaceUnlim=0x00, TxDescSpace32=0x10, TxDescSpace64=0x20, | |
545 | TxDescSpace128=0x30, TxDescSpace256=0x40, | |
546 | TxDescType0=0x00, TxDescType1=0x01, TxDescType2=0x02, | |
547 | TxDescType3=0x03, TxDescType4=0x04, | |
548 | TxNoDMACompletion=0x08, | |
549 | TxDescQAddr64bit=0x80, TxDescQAddr32bit=0, | |
550 | TxHiPriFIFOThreshShift=24, TxPadLenShift=16, | |
551 | TxDMABurstSizeShift=8, | |
552 | }; | |
553 | ||
554 | /* Bits in the RxDescQCtrl register. */ | |
555 | enum rx_ctrl_bits { | |
556 | RxBufferLenShift=16, RxMinDescrThreshShift=0, | |
557 | RxPrefetchMode=0x8000, RxVariableQ=0x2000, | |
558 | Rx2048QEntries=0x4000, Rx256QEntries=0, | |
559 | RxDescAddr64bit=0x1000, RxDescAddr32bit=0, | |
560 | RxDescQAddr64bit=0x0100, RxDescQAddr32bit=0, | |
561 | RxDescSpace4=0x000, RxDescSpace8=0x100, | |
562 | RxDescSpace16=0x200, RxDescSpace32=0x300, | |
563 | RxDescSpace64=0x400, RxDescSpace128=0x500, | |
564 | RxConsumerWrEn=0x80, | |
565 | }; | |
566 | ||
567 | /* Bits in the RxDMACtrl register. */ | |
568 | enum rx_dmactrl_bits { | |
569 | RxReportBadFrames=0x80000000, RxDMAShortFrames=0x40000000, | |
570 | RxDMABadFrames=0x20000000, RxDMACrcErrorFrames=0x10000000, | |
571 | RxDMAControlFrame=0x08000000, RxDMAPauseFrame=0x04000000, | |
572 | RxChecksumIgnore=0, RxChecksumRejectTCPUDP=0x02000000, | |
573 | RxChecksumRejectTCPOnly=0x01000000, | |
574 | RxCompletionQ2Enable=0x800000, | |
575 | RxDMAQ2Disable=0, RxDMAQ2FPOnly=0x100000, | |
576 | RxDMAQ2SmallPkt=0x200000, RxDMAQ2HighPrio=0x300000, | |
577 | RxDMAQ2NonIP=0x400000, | |
578 | RxUseBackupQueue=0x080000, RxDMACRC=0x040000, | |
579 | RxEarlyIntThreshShift=12, RxHighPrioThreshShift=8, | |
580 | RxBurstSizeShift=0, | |
581 | }; | |
582 | ||
583 | /* Bits in the RxCompletionAddr register */ | |
584 | enum rx_compl_bits { | |
585 | RxComplQAddr64bit=0x80, RxComplQAddr32bit=0, | |
586 | RxComplProducerWrEn=0x40, | |
587 | RxComplType0=0x00, RxComplType1=0x10, | |
588 | RxComplType2=0x20, RxComplType3=0x30, | |
589 | RxComplThreshShift=0, | |
590 | }; | |
591 | ||
592 | /* Bits in the TxCompletionAddr register */ | |
593 | enum tx_compl_bits { | |
594 | TxComplQAddr64bit=0x80, TxComplQAddr32bit=0, | |
595 | TxComplProducerWrEn=0x40, | |
596 | TxComplIntrStatus=0x20, | |
597 | CommonQueueMode=0x10, | |
598 | TxComplThreshShift=0, | |
599 | }; | |
600 | ||
601 | /* Bits in the GenCtrl register */ | |
602 | enum gen_ctrl_bits { | |
603 | RxEnable=0x05, TxEnable=0x0a, | |
604 | RxGFPEnable=0x10, TxGFPEnable=0x20, | |
605 | }; | |
606 | ||
607 | /* Bits in the IntrTimerCtrl register */ | |
608 | enum intr_ctrl_bits { | |
609 | Timer10X=0x800, EnableIntrMasking=0x60, SmallFrameBypass=0x100, | |
610 | SmallFrame64=0, SmallFrame128=0x200, SmallFrame256=0x400, SmallFrame512=0x600, | |
611 | IntrLatencyMask=0x1f, | |
612 | }; | |
613 | ||
614 | /* The Rx and Tx buffer descriptors. */ | |
615 | struct starfire_rx_desc { | |
616 | dma_addr_t rxaddr; | |
617 | }; | |
618 | enum rx_desc_bits { | |
619 | RxDescValid=1, RxDescEndRing=2, | |
620 | }; | |
621 | ||
622 | /* Completion queue entry. */ | |
623 | struct short_rx_done_desc { | |
624 | u32 status; /* Low 16 bits is length. */ | |
625 | }; | |
626 | struct basic_rx_done_desc { | |
627 | u32 status; /* Low 16 bits is length. */ | |
628 | u16 vlanid; | |
629 | u16 status2; | |
630 | }; | |
631 | struct csum_rx_done_desc { | |
632 | u32 status; /* Low 16 bits is length. */ | |
633 | u16 csum; /* Partial checksum */ | |
634 | u16 status2; | |
635 | }; | |
636 | struct full_rx_done_desc { | |
637 | u32 status; /* Low 16 bits is length. */ | |
638 | u16 status3; | |
639 | u16 status2; | |
640 | u16 vlanid; | |
641 | u16 csum; /* partial checksum */ | |
642 | u32 timestamp; | |
643 | }; | |
644 | /* XXX: this is ugly and I'm not sure it's worth the trouble -Ion */ | |
1da177e4 LT |
645 | #ifdef VLAN_SUPPORT |
646 | typedef struct full_rx_done_desc rx_done_desc; | |
647 | #define RxComplType RxComplType3 | |
648 | #else /* not VLAN_SUPPORT */ | |
649 | typedef struct csum_rx_done_desc rx_done_desc; | |
650 | #define RxComplType RxComplType2 | |
651 | #endif /* not VLAN_SUPPORT */ | |
1da177e4 LT |
652 | |
653 | enum rx_done_bits { | |
654 | RxOK=0x20000000, RxFIFOErr=0x10000000, RxBufQ2=0x08000000, | |
655 | }; | |
656 | ||
657 | /* Type 1 Tx descriptor. */ | |
658 | struct starfire_tx_desc_1 { | |
659 | u32 status; /* Upper bits are status, lower 16 length. */ | |
660 | u32 addr; | |
661 | }; | |
662 | ||
663 | /* Type 2 Tx descriptor. */ | |
664 | struct starfire_tx_desc_2 { | |
665 | u32 status; /* Upper bits are status, lower 16 length. */ | |
666 | u32 reserved; | |
667 | u64 addr; | |
668 | }; | |
669 | ||
670 | #ifdef ADDR_64BITS | |
671 | typedef struct starfire_tx_desc_2 starfire_tx_desc; | |
672 | #define TX_DESC_TYPE TxDescType2 | |
673 | #else /* not ADDR_64BITS */ | |
674 | typedef struct starfire_tx_desc_1 starfire_tx_desc; | |
675 | #define TX_DESC_TYPE TxDescType1 | |
676 | #endif /* not ADDR_64BITS */ | |
677 | #define TX_DESC_SPACING TxDescSpaceUnlim | |
678 | ||
679 | enum tx_desc_bits { | |
680 | TxDescID=0xB0000000, | |
681 | TxCRCEn=0x01000000, TxDescIntr=0x08000000, | |
682 | TxRingWrap=0x04000000, TxCalTCP=0x02000000, | |
683 | }; | |
684 | struct tx_done_desc { | |
685 | u32 status; /* timestamp, index. */ | |
686 | #if 0 | |
687 | u32 intrstatus; /* interrupt status */ | |
688 | #endif | |
689 | }; | |
690 | ||
691 | struct rx_ring_info { | |
692 | struct sk_buff *skb; | |
693 | dma_addr_t mapping; | |
694 | }; | |
695 | struct tx_ring_info { | |
696 | struct sk_buff *skb; | |
697 | dma_addr_t mapping; | |
698 | unsigned int used_slots; | |
699 | }; | |
700 | ||
701 | #define PHY_CNT 2 | |
702 | struct netdev_private { | |
703 | /* Descriptor rings first for alignment. */ | |
704 | struct starfire_rx_desc *rx_ring; | |
705 | starfire_tx_desc *tx_ring; | |
706 | dma_addr_t rx_ring_dma; | |
707 | dma_addr_t tx_ring_dma; | |
708 | /* The addresses of rx/tx-in-place skbuffs. */ | |
709 | struct rx_ring_info rx_info[RX_RING_SIZE]; | |
710 | struct tx_ring_info tx_info[TX_RING_SIZE]; | |
711 | /* Pointers to completion queues (full pages). */ | |
712 | rx_done_desc *rx_done_q; | |
713 | dma_addr_t rx_done_q_dma; | |
714 | unsigned int rx_done; | |
715 | struct tx_done_desc *tx_done_q; | |
716 | dma_addr_t tx_done_q_dma; | |
717 | unsigned int tx_done; | |
718 | struct net_device_stats stats; | |
719 | struct pci_dev *pci_dev; | |
720 | #ifdef VLAN_SUPPORT | |
721 | struct vlan_group *vlgrp; | |
722 | #endif | |
723 | void *queue_mem; | |
724 | dma_addr_t queue_mem_dma; | |
725 | size_t queue_mem_size; | |
726 | ||
727 | /* Frequently used values: keep some adjacent for cache effect. */ | |
728 | spinlock_t lock; | |
729 | unsigned int cur_rx, dirty_rx; /* Producer/consumer ring indices */ | |
730 | unsigned int cur_tx, dirty_tx, reap_tx; | |
731 | unsigned int rx_buf_sz; /* Based on MTU+slack. */ | |
732 | /* These values keep track of the transceiver/media in use. */ | |
733 | int speed100; /* Set if speed == 100MBit. */ | |
734 | u32 tx_mode; | |
735 | u32 intr_timer_ctrl; | |
736 | u8 tx_threshold; | |
737 | /* MII transceiver section. */ | |
738 | struct mii_if_info mii_if; /* MII lib hooks/info */ | |
739 | int phy_cnt; /* MII device addresses. */ | |
740 | unsigned char phys[PHY_CNT]; /* MII device addresses. */ | |
741 | void __iomem *base; | |
742 | }; | |
743 | ||
744 | ||
745 | static int mdio_read(struct net_device *dev, int phy_id, int location); | |
746 | static void mdio_write(struct net_device *dev, int phy_id, int location, int value); | |
747 | static int netdev_open(struct net_device *dev); | |
748 | static void check_duplex(struct net_device *dev); | |
749 | static void tx_timeout(struct net_device *dev); | |
750 | static void init_ring(struct net_device *dev); | |
751 | static int start_tx(struct sk_buff *skb, struct net_device *dev); | |
752 | static irqreturn_t intr_handler(int irq, void *dev_instance, struct pt_regs *regs); | |
753 | static void netdev_error(struct net_device *dev, int intr_status); | |
754 | static int __netdev_rx(struct net_device *dev, int *quota); | |
755 | static void refill_rx_ring(struct net_device *dev); | |
756 | static void netdev_error(struct net_device *dev, int intr_status); | |
757 | static void set_rx_mode(struct net_device *dev); | |
758 | static struct net_device_stats *get_stats(struct net_device *dev); | |
759 | static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); | |
760 | static int netdev_close(struct net_device *dev); | |
761 | static void netdev_media_change(struct net_device *dev); | |
762 | static struct ethtool_ops ethtool_ops; | |
763 | ||
764 | ||
765 | #ifdef VLAN_SUPPORT | |
766 | static void netdev_vlan_rx_register(struct net_device *dev, struct vlan_group *grp) | |
767 | { | |
768 | struct netdev_private *np = netdev_priv(dev); | |
769 | ||
770 | spin_lock(&np->lock); | |
771 | if (debug > 2) | |
772 | printk("%s: Setting vlgrp to %p\n", dev->name, grp); | |
773 | np->vlgrp = grp; | |
774 | set_rx_mode(dev); | |
775 | spin_unlock(&np->lock); | |
776 | } | |
777 | ||
778 | static void netdev_vlan_rx_add_vid(struct net_device *dev, unsigned short vid) | |
779 | { | |
780 | struct netdev_private *np = netdev_priv(dev); | |
781 | ||
782 | spin_lock(&np->lock); | |
783 | if (debug > 1) | |
784 | printk("%s: Adding vlanid %d to vlan filter\n", dev->name, vid); | |
785 | set_rx_mode(dev); | |
786 | spin_unlock(&np->lock); | |
787 | } | |
788 | ||
789 | static void netdev_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) | |
790 | { | |
791 | struct netdev_private *np = netdev_priv(dev); | |
792 | ||
793 | spin_lock(&np->lock); | |
794 | if (debug > 1) | |
795 | printk("%s: removing vlanid %d from vlan filter\n", dev->name, vid); | |
796 | if (np->vlgrp) | |
797 | np->vlgrp->vlan_devices[vid] = NULL; | |
798 | set_rx_mode(dev); | |
799 | spin_unlock(&np->lock); | |
800 | } | |
801 | #endif /* VLAN_SUPPORT */ | |
802 | ||
803 | ||
804 | static int __devinit starfire_init_one(struct pci_dev *pdev, | |
805 | const struct pci_device_id *ent) | |
806 | { | |
807 | struct netdev_private *np; | |
808 | int i, irq, option, chip_idx = ent->driver_data; | |
809 | struct net_device *dev; | |
810 | static int card_idx = -1; | |
811 | long ioaddr; | |
812 | void __iomem *base; | |
813 | int drv_flags, io_size; | |
814 | int boguscnt; | |
815 | ||
816 | /* when built into the kernel, we only print version if device is found */ | |
817 | #ifndef MODULE | |
818 | static int printed_version; | |
819 | if (!printed_version++) | |
820 | printk(version); | |
821 | #endif | |
822 | ||
823 | card_idx++; | |
824 | ||
825 | if (pci_enable_device (pdev)) | |
826 | return -EIO; | |
827 | ||
828 | ioaddr = pci_resource_start(pdev, 0); | |
829 | io_size = pci_resource_len(pdev, 0); | |
830 | if (!ioaddr || ((pci_resource_flags(pdev, 0) & IORESOURCE_MEM) == 0)) { | |
831 | printk(KERN_ERR DRV_NAME " %d: no PCI MEM resources, aborting\n", card_idx); | |
832 | return -ENODEV; | |
833 | } | |
834 | ||
835 | dev = alloc_etherdev(sizeof(*np)); | |
836 | if (!dev) { | |
837 | printk(KERN_ERR DRV_NAME " %d: cannot alloc etherdev, aborting\n", card_idx); | |
838 | return -ENOMEM; | |
839 | } | |
840 | SET_MODULE_OWNER(dev); | |
841 | SET_NETDEV_DEV(dev, &pdev->dev); | |
842 | ||
843 | irq = pdev->irq; | |
844 | ||
845 | if (pci_request_regions (pdev, DRV_NAME)) { | |
846 | printk(KERN_ERR DRV_NAME " %d: cannot reserve PCI resources, aborting\n", card_idx); | |
847 | goto err_out_free_netdev; | |
848 | } | |
849 | ||
850 | /* ioremap is borken in Linux-2.2.x/sparc64 */ | |
851 | base = ioremap(ioaddr, io_size); | |
852 | if (!base) { | |
853 | printk(KERN_ERR DRV_NAME " %d: cannot remap %#x @ %#lx, aborting\n", | |
854 | card_idx, io_size, ioaddr); | |
855 | goto err_out_free_res; | |
856 | } | |
857 | ||
858 | pci_set_master(pdev); | |
859 | ||
860 | /* enable MWI -- it vastly improves Rx performance on sparc64 */ | |
861 | pci_set_mwi(pdev); | |
862 | ||
1da177e4 LT |
863 | #ifdef ZEROCOPY |
864 | /* Starfire can do TCP/UDP checksumming */ | |
865 | if (enable_hw_cksum) | |
fdecea66 | 866 | dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG; |
1da177e4 LT |
867 | #endif /* ZEROCOPY */ |
868 | #ifdef VLAN_SUPPORT | |
869 | dev->features |= NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER; | |
870 | dev->vlan_rx_register = netdev_vlan_rx_register; | |
871 | dev->vlan_rx_add_vid = netdev_vlan_rx_add_vid; | |
872 | dev->vlan_rx_kill_vid = netdev_vlan_rx_kill_vid; | |
873 | #endif /* VLAN_RX_KILL_VID */ | |
874 | #ifdef ADDR_64BITS | |
875 | dev->features |= NETIF_F_HIGHDMA; | |
876 | #endif /* ADDR_64BITS */ | |
877 | ||
878 | /* Serial EEPROM reads are hidden by the hardware. */ | |
879 | for (i = 0; i < 6; i++) | |
880 | dev->dev_addr[i] = readb(base + EEPROMCtrl + 20 - i); | |
881 | ||
882 | #if ! defined(final_version) /* Dump the EEPROM contents during development. */ | |
883 | if (debug > 4) | |
884 | for (i = 0; i < 0x20; i++) | |
885 | printk("%2.2x%s", | |
886 | (unsigned int)readb(base + EEPROMCtrl + i), | |
887 | i % 16 != 15 ? " " : "\n"); | |
888 | #endif | |
889 | ||
890 | /* Issue soft reset */ | |
891 | writel(MiiSoftReset, base + TxMode); | |
892 | udelay(1000); | |
893 | writel(0, base + TxMode); | |
894 | ||
895 | /* Reset the chip to erase previous misconfiguration. */ | |
896 | writel(1, base + PCIDeviceConfig); | |
897 | boguscnt = 1000; | |
898 | while (--boguscnt > 0) { | |
899 | udelay(10); | |
900 | if ((readl(base + PCIDeviceConfig) & 1) == 0) | |
901 | break; | |
902 | } | |
903 | if (boguscnt == 0) | |
904 | printk("%s: chipset reset never completed!\n", dev->name); | |
905 | /* wait a little longer */ | |
906 | udelay(1000); | |
907 | ||
908 | dev->base_addr = (unsigned long)base; | |
909 | dev->irq = irq; | |
910 | ||
911 | np = netdev_priv(dev); | |
912 | np->base = base; | |
913 | spin_lock_init(&np->lock); | |
914 | pci_set_drvdata(pdev, dev); | |
915 | ||
916 | np->pci_dev = pdev; | |
917 | ||
918 | np->mii_if.dev = dev; | |
919 | np->mii_if.mdio_read = mdio_read; | |
920 | np->mii_if.mdio_write = mdio_write; | |
921 | np->mii_if.phy_id_mask = 0x1f; | |
922 | np->mii_if.reg_num_mask = 0x1f; | |
923 | ||
924 | drv_flags = netdrv_tbl[chip_idx].drv_flags; | |
925 | ||
926 | option = card_idx < MAX_UNITS ? options[card_idx] : 0; | |
927 | if (dev->mem_start) | |
928 | option = dev->mem_start; | |
929 | ||
930 | /* The lower four bits are the media type. */ | |
931 | if (option & 0x200) | |
932 | np->mii_if.full_duplex = 1; | |
933 | ||
934 | if (card_idx < MAX_UNITS && full_duplex[card_idx] > 0) | |
935 | np->mii_if.full_duplex = 1; | |
936 | ||
937 | if (np->mii_if.full_duplex) | |
938 | np->mii_if.force_media = 1; | |
939 | else | |
940 | np->mii_if.force_media = 0; | |
941 | np->speed100 = 1; | |
942 | ||
943 | /* timer resolution is 128 * 0.8us */ | |
944 | np->intr_timer_ctrl = (((intr_latency * 10) / 1024) & IntrLatencyMask) | | |
945 | Timer10X | EnableIntrMasking; | |
946 | ||
947 | if (small_frames > 0) { | |
948 | np->intr_timer_ctrl |= SmallFrameBypass; | |
949 | switch (small_frames) { | |
950 | case 1 ... 64: | |
951 | np->intr_timer_ctrl |= SmallFrame64; | |
952 | break; | |
953 | case 65 ... 128: | |
954 | np->intr_timer_ctrl |= SmallFrame128; | |
955 | break; | |
956 | case 129 ... 256: | |
957 | np->intr_timer_ctrl |= SmallFrame256; | |
958 | break; | |
959 | default: | |
960 | np->intr_timer_ctrl |= SmallFrame512; | |
961 | if (small_frames > 512) | |
962 | printk("Adjusting small_frames down to 512\n"); | |
963 | break; | |
964 | } | |
965 | } | |
966 | ||
967 | /* The chip-specific entries in the device structure. */ | |
968 | dev->open = &netdev_open; | |
969 | dev->hard_start_xmit = &start_tx; | |
fdecea66 JG |
970 | dev->tx_timeout = tx_timeout; |
971 | dev->watchdog_timeo = TX_TIMEOUT; | |
1da177e4 LT |
972 | init_poll(dev); |
973 | dev->stop = &netdev_close; | |
974 | dev->get_stats = &get_stats; | |
975 | dev->set_multicast_list = &set_rx_mode; | |
976 | dev->do_ioctl = &netdev_ioctl; | |
977 | SET_ETHTOOL_OPS(dev, ðtool_ops); | |
978 | ||
979 | if (mtu) | |
980 | dev->mtu = mtu; | |
981 | ||
982 | if (register_netdev(dev)) | |
983 | goto err_out_cleardev; | |
984 | ||
985 | printk(KERN_INFO "%s: %s at %p, ", | |
986 | dev->name, netdrv_tbl[chip_idx].name, base); | |
987 | for (i = 0; i < 5; i++) | |
988 | printk("%2.2x:", dev->dev_addr[i]); | |
989 | printk("%2.2x, IRQ %d.\n", dev->dev_addr[i], irq); | |
990 | ||
991 | if (drv_flags & CanHaveMII) { | |
992 | int phy, phy_idx = 0; | |
993 | int mii_status; | |
994 | for (phy = 0; phy < 32 && phy_idx < PHY_CNT; phy++) { | |
995 | mdio_write(dev, phy, MII_BMCR, BMCR_RESET); | |
996 | mdelay(100); | |
997 | boguscnt = 1000; | |
998 | while (--boguscnt > 0) | |
999 | if ((mdio_read(dev, phy, MII_BMCR) & BMCR_RESET) == 0) | |
1000 | break; | |
1001 | if (boguscnt == 0) { | |
fdecea66 | 1002 | printk("%s: PHY#%d reset never completed!\n", dev->name, phy); |
1da177e4 LT |
1003 | continue; |
1004 | } | |
1005 | mii_status = mdio_read(dev, phy, MII_BMSR); | |
1006 | if (mii_status != 0) { | |
1007 | np->phys[phy_idx++] = phy; | |
1008 | np->mii_if.advertising = mdio_read(dev, phy, MII_ADVERTISE); | |
1009 | printk(KERN_INFO "%s: MII PHY found at address %d, status " | |
1010 | "%#4.4x advertising %#4.4x.\n", | |
1011 | dev->name, phy, mii_status, np->mii_if.advertising); | |
1012 | /* there can be only one PHY on-board */ | |
1013 | break; | |
1014 | } | |
1015 | } | |
1016 | np->phy_cnt = phy_idx; | |
1017 | if (np->phy_cnt > 0) | |
1018 | np->mii_if.phy_id = np->phys[0]; | |
1019 | else | |
1020 | memset(&np->mii_if, 0, sizeof(np->mii_if)); | |
1021 | } | |
1022 | ||
1023 | printk(KERN_INFO "%s: scatter-gather and hardware TCP cksumming %s.\n", | |
1024 | dev->name, enable_hw_cksum ? "enabled" : "disabled"); | |
1025 | return 0; | |
1026 | ||
1027 | err_out_cleardev: | |
1028 | pci_set_drvdata(pdev, NULL); | |
1029 | iounmap(base); | |
1030 | err_out_free_res: | |
1031 | pci_release_regions (pdev); | |
1032 | err_out_free_netdev: | |
1033 | free_netdev(dev); | |
1034 | return -ENODEV; | |
1035 | } | |
1036 | ||
1037 | ||
1038 | /* Read the MII Management Data I/O (MDIO) interfaces. */ | |
1039 | static int mdio_read(struct net_device *dev, int phy_id, int location) | |
1040 | { | |
1041 | struct netdev_private *np = netdev_priv(dev); | |
1042 | void __iomem *mdio_addr = np->base + MIICtrl + (phy_id<<7) + (location<<2); | |
1043 | int result, boguscnt=1000; | |
1044 | /* ??? Should we add a busy-wait here? */ | |
1045 | do | |
1046 | result = readl(mdio_addr); | |
1047 | while ((result & 0xC0000000) != 0x80000000 && --boguscnt > 0); | |
1048 | if (boguscnt == 0) | |
1049 | return 0; | |
1050 | if ((result & 0xffff) == 0xffff) | |
1051 | return 0; | |
1052 | return result & 0xffff; | |
1053 | } | |
1054 | ||
1055 | ||
1056 | static void mdio_write(struct net_device *dev, int phy_id, int location, int value) | |
1057 | { | |
1058 | struct netdev_private *np = netdev_priv(dev); | |
1059 | void __iomem *mdio_addr = np->base + MIICtrl + (phy_id<<7) + (location<<2); | |
1060 | writel(value, mdio_addr); | |
1061 | /* The busy-wait will occur before a read. */ | |
1062 | } | |
1063 | ||
1064 | ||
1065 | static int netdev_open(struct net_device *dev) | |
1066 | { | |
1067 | struct netdev_private *np = netdev_priv(dev); | |
1068 | void __iomem *ioaddr = np->base; | |
1069 | int i, retval; | |
1070 | size_t tx_done_q_size, rx_done_q_size, tx_ring_size, rx_ring_size; | |
1071 | ||
1072 | /* Do we ever need to reset the chip??? */ | |
fdecea66 | 1073 | |
1da177e4 LT |
1074 | retval = request_irq(dev->irq, &intr_handler, SA_SHIRQ, dev->name, dev); |
1075 | if (retval) | |
1076 | return retval; | |
1077 | ||
1078 | /* Disable the Rx and Tx, and reset the chip. */ | |
1079 | writel(0, ioaddr + GenCtrl); | |
1080 | writel(1, ioaddr + PCIDeviceConfig); | |
1081 | if (debug > 1) | |
1082 | printk(KERN_DEBUG "%s: netdev_open() irq %d.\n", | |
1083 | dev->name, dev->irq); | |
1084 | ||
1085 | /* Allocate the various queues. */ | |
1086 | if (np->queue_mem == 0) { | |
1087 | tx_done_q_size = ((sizeof(struct tx_done_desc) * DONE_Q_SIZE + QUEUE_ALIGN - 1) / QUEUE_ALIGN) * QUEUE_ALIGN; | |
1088 | rx_done_q_size = ((sizeof(rx_done_desc) * DONE_Q_SIZE + QUEUE_ALIGN - 1) / QUEUE_ALIGN) * QUEUE_ALIGN; | |
1089 | tx_ring_size = ((sizeof(starfire_tx_desc) * TX_RING_SIZE + QUEUE_ALIGN - 1) / QUEUE_ALIGN) * QUEUE_ALIGN; | |
1090 | rx_ring_size = sizeof(struct starfire_rx_desc) * RX_RING_SIZE; | |
1091 | np->queue_mem_size = tx_done_q_size + rx_done_q_size + tx_ring_size + rx_ring_size; | |
1092 | np->queue_mem = pci_alloc_consistent(np->pci_dev, np->queue_mem_size, &np->queue_mem_dma); | |
d8840ac9 AD |
1093 | if (np->queue_mem == NULL) { |
1094 | free_irq(dev->irq, dev); | |
1da177e4 | 1095 | return -ENOMEM; |
d8840ac9 | 1096 | } |
1da177e4 LT |
1097 | |
1098 | np->tx_done_q = np->queue_mem; | |
1099 | np->tx_done_q_dma = np->queue_mem_dma; | |
1100 | np->rx_done_q = (void *) np->tx_done_q + tx_done_q_size; | |
1101 | np->rx_done_q_dma = np->tx_done_q_dma + tx_done_q_size; | |
1102 | np->tx_ring = (void *) np->rx_done_q + rx_done_q_size; | |
1103 | np->tx_ring_dma = np->rx_done_q_dma + rx_done_q_size; | |
1104 | np->rx_ring = (void *) np->tx_ring + tx_ring_size; | |
1105 | np->rx_ring_dma = np->tx_ring_dma + tx_ring_size; | |
1106 | } | |
1107 | ||
1108 | /* Start with no carrier, it gets adjusted later */ | |
1109 | netif_carrier_off(dev); | |
1110 | init_ring(dev); | |
1111 | /* Set the size of the Rx buffers. */ | |
1112 | writel((np->rx_buf_sz << RxBufferLenShift) | | |
1113 | (0 << RxMinDescrThreshShift) | | |
1114 | RxPrefetchMode | RxVariableQ | | |
1115 | RX_Q_ENTRIES | | |
1116 | RX_DESC_Q_ADDR_SIZE | RX_DESC_ADDR_SIZE | | |
1117 | RxDescSpace4, | |
1118 | ioaddr + RxDescQCtrl); | |
1119 | ||
1120 | /* Set up the Rx DMA controller. */ | |
1121 | writel(RxChecksumIgnore | | |
1122 | (0 << RxEarlyIntThreshShift) | | |
1123 | (6 << RxHighPrioThreshShift) | | |
1124 | ((DMA_BURST_SIZE / 32) << RxBurstSizeShift), | |
1125 | ioaddr + RxDMACtrl); | |
1126 | ||
1127 | /* Set Tx descriptor */ | |
1128 | writel((2 << TxHiPriFIFOThreshShift) | | |
1129 | (0 << TxPadLenShift) | | |
1130 | ((DMA_BURST_SIZE / 32) << TxDMABurstSizeShift) | | |
1131 | TX_DESC_Q_ADDR_SIZE | | |
1132 | TX_DESC_SPACING | TX_DESC_TYPE, | |
1133 | ioaddr + TxDescCtrl); | |
1134 | ||
1135 | writel( (np->queue_mem_dma >> 16) >> 16, ioaddr + RxDescQHiAddr); | |
1136 | writel( (np->queue_mem_dma >> 16) >> 16, ioaddr + TxRingHiAddr); | |
1137 | writel( (np->queue_mem_dma >> 16) >> 16, ioaddr + CompletionHiAddr); | |
1138 | writel(np->rx_ring_dma, ioaddr + RxDescQAddr); | |
1139 | writel(np->tx_ring_dma, ioaddr + TxRingPtr); | |
1140 | ||
1141 | writel(np->tx_done_q_dma, ioaddr + TxCompletionAddr); | |
1142 | writel(np->rx_done_q_dma | | |
1143 | RxComplType | | |
1144 | (0 << RxComplThreshShift), | |
1145 | ioaddr + RxCompletionAddr); | |
1146 | ||
1147 | if (debug > 1) | |
1148 | printk(KERN_DEBUG "%s: Filling in the station address.\n", dev->name); | |
1149 | ||
1150 | /* Fill both the Tx SA register and the Rx perfect filter. */ | |
1151 | for (i = 0; i < 6; i++) | |
1152 | writeb(dev->dev_addr[i], ioaddr + TxStationAddr + 5 - i); | |
1153 | /* The first entry is special because it bypasses the VLAN filter. | |
1154 | Don't use it. */ | |
1155 | writew(0, ioaddr + PerfFilterTable); | |
1156 | writew(0, ioaddr + PerfFilterTable + 4); | |
1157 | writew(0, ioaddr + PerfFilterTable + 8); | |
1158 | for (i = 1; i < 16; i++) { | |
1159 | u16 *eaddrs = (u16 *)dev->dev_addr; | |
1160 | void __iomem *setup_frm = ioaddr + PerfFilterTable + i * 16; | |
1161 | writew(cpu_to_be16(eaddrs[2]), setup_frm); setup_frm += 4; | |
1162 | writew(cpu_to_be16(eaddrs[1]), setup_frm); setup_frm += 4; | |
1163 | writew(cpu_to_be16(eaddrs[0]), setup_frm); setup_frm += 8; | |
1164 | } | |
1165 | ||
1166 | /* Initialize other registers. */ | |
1167 | /* Configure the PCI bus bursts and FIFO thresholds. */ | |
1168 | np->tx_mode = TxFlowEnable|RxFlowEnable|PadEnable; /* modified when link is up. */ | |
1169 | writel(MiiSoftReset | np->tx_mode, ioaddr + TxMode); | |
1170 | udelay(1000); | |
1171 | writel(np->tx_mode, ioaddr + TxMode); | |
1172 | np->tx_threshold = 4; | |
1173 | writel(np->tx_threshold, ioaddr + TxThreshold); | |
1174 | ||
1175 | writel(np->intr_timer_ctrl, ioaddr + IntrTimerCtrl); | |
1176 | ||
1da177e4 LT |
1177 | netif_start_queue(dev); |
1178 | ||
1179 | if (debug > 1) | |
1180 | printk(KERN_DEBUG "%s: Setting the Rx and Tx modes.\n", dev->name); | |
1181 | set_rx_mode(dev); | |
1182 | ||
1183 | np->mii_if.advertising = mdio_read(dev, np->phys[0], MII_ADVERTISE); | |
1184 | check_duplex(dev); | |
1185 | ||
1186 | /* Enable GPIO interrupts on link change */ | |
1187 | writel(0x0f00ff00, ioaddr + GPIOCtrl); | |
1188 | ||
1189 | /* Set the interrupt mask */ | |
1190 | writel(IntrRxDone | IntrRxEmpty | IntrDMAErr | | |
1191 | IntrTxDMADone | IntrStatsMax | IntrLinkChange | | |
1192 | IntrRxGFPDead | IntrNoTxCsum | IntrTxBadID, | |
1193 | ioaddr + IntrEnable); | |
1194 | /* Enable PCI interrupts. */ | |
1195 | writel(0x00800000 | readl(ioaddr + PCIDeviceConfig), | |
1196 | ioaddr + PCIDeviceConfig); | |
1197 | ||
1198 | #ifdef VLAN_SUPPORT | |
1199 | /* Set VLAN type to 802.1q */ | |
1200 | writel(ETH_P_8021Q, ioaddr + VlanType); | |
1201 | #endif /* VLAN_SUPPORT */ | |
1202 | ||
1da177e4 LT |
1203 | /* Load Rx/Tx firmware into the frame processors */ |
1204 | for (i = 0; i < FIRMWARE_RX_SIZE * 2; i++) | |
1205 | writel(firmware_rx[i], ioaddr + RxGfpMem + i * 4); | |
1206 | for (i = 0; i < FIRMWARE_TX_SIZE * 2; i++) | |
1207 | writel(firmware_tx[i], ioaddr + TxGfpMem + i * 4); | |
1da177e4 LT |
1208 | if (enable_hw_cksum) |
1209 | /* Enable the Rx and Tx units, and the Rx/Tx frame processors. */ | |
1210 | writel(TxEnable|TxGFPEnable|RxEnable|RxGFPEnable, ioaddr + GenCtrl); | |
1211 | else | |
1212 | /* Enable the Rx and Tx units only. */ | |
1213 | writel(TxEnable|RxEnable, ioaddr + GenCtrl); | |
1214 | ||
1215 | if (debug > 1) | |
1216 | printk(KERN_DEBUG "%s: Done netdev_open().\n", | |
1217 | dev->name); | |
1218 | ||
1219 | return 0; | |
1220 | } | |
1221 | ||
1222 | ||
1223 | static void check_duplex(struct net_device *dev) | |
1224 | { | |
1225 | struct netdev_private *np = netdev_priv(dev); | |
1226 | u16 reg0; | |
1227 | int silly_count = 1000; | |
1228 | ||
1229 | mdio_write(dev, np->phys[0], MII_ADVERTISE, np->mii_if.advertising); | |
1230 | mdio_write(dev, np->phys[0], MII_BMCR, BMCR_RESET); | |
1231 | udelay(500); | |
1232 | while (--silly_count && mdio_read(dev, np->phys[0], MII_BMCR) & BMCR_RESET) | |
1233 | /* do nothing */; | |
1234 | if (!silly_count) { | |
1235 | printk("%s: MII reset failed!\n", dev->name); | |
1236 | return; | |
1237 | } | |
1238 | ||
1239 | reg0 = mdio_read(dev, np->phys[0], MII_BMCR); | |
1240 | ||
1241 | if (!np->mii_if.force_media) { | |
1242 | reg0 |= BMCR_ANENABLE | BMCR_ANRESTART; | |
1243 | } else { | |
1244 | reg0 &= ~(BMCR_ANENABLE | BMCR_ANRESTART); | |
1245 | if (np->speed100) | |
1246 | reg0 |= BMCR_SPEED100; | |
1247 | if (np->mii_if.full_duplex) | |
1248 | reg0 |= BMCR_FULLDPLX; | |
1249 | printk(KERN_DEBUG "%s: Link forced to %sMbit %s-duplex\n", | |
1250 | dev->name, | |
1251 | np->speed100 ? "100" : "10", | |
1252 | np->mii_if.full_duplex ? "full" : "half"); | |
1253 | } | |
1254 | mdio_write(dev, np->phys[0], MII_BMCR, reg0); | |
1255 | } | |
1256 | ||
1257 | ||
1258 | static void tx_timeout(struct net_device *dev) | |
1259 | { | |
1260 | struct netdev_private *np = netdev_priv(dev); | |
1261 | void __iomem *ioaddr = np->base; | |
1262 | int old_debug; | |
1263 | ||
1264 | printk(KERN_WARNING "%s: Transmit timed out, status %#8.8x, " | |
1265 | "resetting...\n", dev->name, (int) readl(ioaddr + IntrStatus)); | |
1266 | ||
1267 | /* Perhaps we should reinitialize the hardware here. */ | |
1268 | ||
1269 | /* | |
1270 | * Stop and restart the interface. | |
1271 | * Cheat and increase the debug level temporarily. | |
1272 | */ | |
1273 | old_debug = debug; | |
1274 | debug = 2; | |
1275 | netdev_close(dev); | |
1276 | netdev_open(dev); | |
1277 | debug = old_debug; | |
1278 | ||
1279 | /* Trigger an immediate transmit demand. */ | |
1280 | ||
1281 | dev->trans_start = jiffies; | |
1282 | np->stats.tx_errors++; | |
1283 | netif_wake_queue(dev); | |
1284 | } | |
1285 | ||
1286 | ||
1287 | /* Initialize the Rx and Tx rings, along with various 'dev' bits. */ | |
1288 | static void init_ring(struct net_device *dev) | |
1289 | { | |
1290 | struct netdev_private *np = netdev_priv(dev); | |
1291 | int i; | |
1292 | ||
1293 | np->cur_rx = np->cur_tx = np->reap_tx = 0; | |
1294 | np->dirty_rx = np->dirty_tx = np->rx_done = np->tx_done = 0; | |
1295 | ||
1296 | np->rx_buf_sz = (dev->mtu <= 1500 ? PKT_BUF_SZ : dev->mtu + 32); | |
1297 | ||
1298 | /* Fill in the Rx buffers. Handle allocation failure gracefully. */ | |
1299 | for (i = 0; i < RX_RING_SIZE; i++) { | |
1300 | struct sk_buff *skb = dev_alloc_skb(np->rx_buf_sz); | |
1301 | np->rx_info[i].skb = skb; | |
1302 | if (skb == NULL) | |
1303 | break; | |
689be439 | 1304 | np->rx_info[i].mapping = pci_map_single(np->pci_dev, skb->data, np->rx_buf_sz, PCI_DMA_FROMDEVICE); |
1da177e4 LT |
1305 | skb->dev = dev; /* Mark as being used by this device. */ |
1306 | /* Grrr, we cannot offset to correctly align the IP header. */ | |
1307 | np->rx_ring[i].rxaddr = cpu_to_dma(np->rx_info[i].mapping | RxDescValid); | |
1308 | } | |
1309 | writew(i - 1, np->base + RxDescQIdx); | |
1310 | np->dirty_rx = (unsigned int)(i - RX_RING_SIZE); | |
1311 | ||
1312 | /* Clear the remainder of the Rx buffer ring. */ | |
1313 | for ( ; i < RX_RING_SIZE; i++) { | |
1314 | np->rx_ring[i].rxaddr = 0; | |
1315 | np->rx_info[i].skb = NULL; | |
1316 | np->rx_info[i].mapping = 0; | |
1317 | } | |
1318 | /* Mark the last entry as wrapping the ring. */ | |
1319 | np->rx_ring[RX_RING_SIZE - 1].rxaddr |= cpu_to_dma(RxDescEndRing); | |
1320 | ||
1321 | /* Clear the completion rings. */ | |
1322 | for (i = 0; i < DONE_Q_SIZE; i++) { | |
1323 | np->rx_done_q[i].status = 0; | |
1324 | np->tx_done_q[i].status = 0; | |
1325 | } | |
1326 | ||
1327 | for (i = 0; i < TX_RING_SIZE; i++) | |
1328 | memset(&np->tx_info[i], 0, sizeof(np->tx_info[i])); | |
1329 | ||
1330 | return; | |
1331 | } | |
1332 | ||
1333 | ||
1334 | static int start_tx(struct sk_buff *skb, struct net_device *dev) | |
1335 | { | |
1336 | struct netdev_private *np = netdev_priv(dev); | |
1337 | unsigned int entry; | |
1338 | u32 status; | |
1339 | int i; | |
1340 | ||
1da177e4 LT |
1341 | /* |
1342 | * be cautious here, wrapping the queue has weird semantics | |
1343 | * and we may not have enough slots even when it seems we do. | |
1344 | */ | |
1345 | if ((np->cur_tx - np->dirty_tx) + skb_num_frags(skb) * 2 > TX_RING_SIZE) { | |
1346 | netif_stop_queue(dev); | |
1347 | return 1; | |
1348 | } | |
1349 | ||
1350 | #if defined(ZEROCOPY) && defined(HAS_BROKEN_FIRMWARE) | |
67974231 IB |
1351 | if (skb->ip_summed == CHECKSUM_HW) { |
1352 | skb = skb_padto(skb, (skb->len + PADDING_MASK) & ~PADDING_MASK); | |
1353 | if (skb == NULL) | |
1354 | return NETDEV_TX_OK; | |
1da177e4 LT |
1355 | } |
1356 | #endif /* ZEROCOPY && HAS_BROKEN_FIRMWARE */ | |
1357 | ||
1358 | entry = np->cur_tx % TX_RING_SIZE; | |
1359 | for (i = 0; i < skb_num_frags(skb); i++) { | |
1360 | int wrap_ring = 0; | |
1361 | status = TxDescID; | |
1362 | ||
1363 | if (i == 0) { | |
1364 | np->tx_info[entry].skb = skb; | |
1365 | status |= TxCRCEn; | |
1366 | if (entry >= TX_RING_SIZE - skb_num_frags(skb)) { | |
1367 | status |= TxRingWrap; | |
1368 | wrap_ring = 1; | |
1369 | } | |
1370 | if (np->reap_tx) { | |
1371 | status |= TxDescIntr; | |
1372 | np->reap_tx = 0; | |
1373 | } | |
1374 | if (skb->ip_summed == CHECKSUM_HW) { | |
1375 | status |= TxCalTCP; | |
1376 | np->stats.tx_compressed++; | |
1377 | } | |
1378 | status |= skb_first_frag_len(skb) | (skb_num_frags(skb) << 16); | |
1379 | ||
1380 | np->tx_info[entry].mapping = | |
1381 | pci_map_single(np->pci_dev, skb->data, skb_first_frag_len(skb), PCI_DMA_TODEVICE); | |
1382 | } else { | |
1da177e4 LT |
1383 | skb_frag_t *this_frag = &skb_shinfo(skb)->frags[i - 1]; |
1384 | status |= this_frag->size; | |
1385 | np->tx_info[entry].mapping = | |
1386 | pci_map_single(np->pci_dev, page_address(this_frag->page) + this_frag->page_offset, this_frag->size, PCI_DMA_TODEVICE); | |
1da177e4 LT |
1387 | } |
1388 | ||
1389 | np->tx_ring[entry].addr = cpu_to_dma(np->tx_info[entry].mapping); | |
1390 | np->tx_ring[entry].status = cpu_to_le32(status); | |
1391 | if (debug > 3) | |
1392 | printk(KERN_DEBUG "%s: Tx #%d/#%d slot %d status %#8.8x.\n", | |
1393 | dev->name, np->cur_tx, np->dirty_tx, | |
1394 | entry, status); | |
1395 | if (wrap_ring) { | |
1396 | np->tx_info[entry].used_slots = TX_RING_SIZE - entry; | |
1397 | np->cur_tx += np->tx_info[entry].used_slots; | |
1398 | entry = 0; | |
1399 | } else { | |
1400 | np->tx_info[entry].used_slots = 1; | |
1401 | np->cur_tx += np->tx_info[entry].used_slots; | |
1402 | entry++; | |
1403 | } | |
1404 | /* scavenge the tx descriptors twice per TX_RING_SIZE */ | |
1405 | if (np->cur_tx % (TX_RING_SIZE / 2) == 0) | |
1406 | np->reap_tx = 1; | |
1407 | } | |
1408 | ||
1409 | /* Non-x86: explicitly flush descriptor cache lines here. */ | |
1410 | /* Ensure all descriptors are written back before the transmit is | |
1411 | initiated. - Jes */ | |
1412 | wmb(); | |
1413 | ||
1414 | /* Update the producer index. */ | |
1415 | writel(entry * (sizeof(starfire_tx_desc) / 8), np->base + TxProducerIdx); | |
1416 | ||
1417 | /* 4 is arbitrary, but should be ok */ | |
1418 | if ((np->cur_tx - np->dirty_tx) + 4 > TX_RING_SIZE) | |
1419 | netif_stop_queue(dev); | |
1420 | ||
1421 | dev->trans_start = jiffies; | |
1422 | ||
1423 | return 0; | |
1424 | } | |
1425 | ||
1426 | ||
1427 | /* The interrupt handler does all of the Rx thread work and cleans up | |
1428 | after the Tx thread. */ | |
1429 | static irqreturn_t intr_handler(int irq, void *dev_instance, struct pt_regs *rgs) | |
1430 | { | |
1431 | struct net_device *dev = dev_instance; | |
1432 | struct netdev_private *np = netdev_priv(dev); | |
1433 | void __iomem *ioaddr = np->base; | |
1434 | int boguscnt = max_interrupt_work; | |
1435 | int consumer; | |
1436 | int tx_status; | |
1437 | int handled = 0; | |
1438 | ||
1439 | do { | |
1440 | u32 intr_status = readl(ioaddr + IntrClear); | |
1441 | ||
1442 | if (debug > 4) | |
1443 | printk(KERN_DEBUG "%s: Interrupt status %#8.8x.\n", | |
1444 | dev->name, intr_status); | |
1445 | ||
1446 | if (intr_status == 0 || intr_status == (u32) -1) | |
1447 | break; | |
1448 | ||
1449 | handled = 1; | |
1450 | ||
1451 | if (intr_status & (IntrRxDone | IntrRxEmpty)) | |
1452 | netdev_rx(dev, ioaddr); | |
1453 | ||
1454 | /* Scavenge the skbuff list based on the Tx-done queue. | |
1455 | There are redundant checks here that may be cleaned up | |
1456 | after the driver has proven to be reliable. */ | |
1457 | consumer = readl(ioaddr + TxConsumerIdx); | |
1458 | if (debug > 3) | |
1459 | printk(KERN_DEBUG "%s: Tx Consumer index is %d.\n", | |
1460 | dev->name, consumer); | |
1461 | ||
1462 | while ((tx_status = le32_to_cpu(np->tx_done_q[np->tx_done].status)) != 0) { | |
1463 | if (debug > 3) | |
1464 | printk(KERN_DEBUG "%s: Tx completion #%d entry %d is %#8.8x.\n", | |
1465 | dev->name, np->dirty_tx, np->tx_done, tx_status); | |
1466 | if ((tx_status & 0xe0000000) == 0xa0000000) { | |
1467 | np->stats.tx_packets++; | |
1468 | } else if ((tx_status & 0xe0000000) == 0x80000000) { | |
1469 | u16 entry = (tx_status & 0x7fff) / sizeof(starfire_tx_desc); | |
1470 | struct sk_buff *skb = np->tx_info[entry].skb; | |
1471 | np->tx_info[entry].skb = NULL; | |
1472 | pci_unmap_single(np->pci_dev, | |
1473 | np->tx_info[entry].mapping, | |
1474 | skb_first_frag_len(skb), | |
1475 | PCI_DMA_TODEVICE); | |
1476 | np->tx_info[entry].mapping = 0; | |
1477 | np->dirty_tx += np->tx_info[entry].used_slots; | |
1478 | entry = (entry + np->tx_info[entry].used_slots) % TX_RING_SIZE; | |
1da177e4 LT |
1479 | { |
1480 | int i; | |
1481 | for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { | |
1482 | pci_unmap_single(np->pci_dev, | |
1483 | np->tx_info[entry].mapping, | |
1484 | skb_shinfo(skb)->frags[i].size, | |
1485 | PCI_DMA_TODEVICE); | |
1486 | np->dirty_tx++; | |
1487 | entry++; | |
1488 | } | |
1489 | } | |
fdecea66 | 1490 | |
1da177e4 LT |
1491 | dev_kfree_skb_irq(skb); |
1492 | } | |
1493 | np->tx_done_q[np->tx_done].status = 0; | |
1494 | np->tx_done = (np->tx_done + 1) % DONE_Q_SIZE; | |
1495 | } | |
1496 | writew(np->tx_done, ioaddr + CompletionQConsumerIdx + 2); | |
1497 | ||
1498 | if (netif_queue_stopped(dev) && | |
1499 | (np->cur_tx - np->dirty_tx + 4 < TX_RING_SIZE)) { | |
1500 | /* The ring is no longer full, wake the queue. */ | |
1501 | netif_wake_queue(dev); | |
1502 | } | |
1503 | ||
1504 | /* Stats overflow */ | |
1505 | if (intr_status & IntrStatsMax) | |
1506 | get_stats(dev); | |
1507 | ||
1508 | /* Media change interrupt. */ | |
1509 | if (intr_status & IntrLinkChange) | |
1510 | netdev_media_change(dev); | |
1511 | ||
1512 | /* Abnormal error summary/uncommon events handlers. */ | |
1513 | if (intr_status & IntrAbnormalSummary) | |
1514 | netdev_error(dev, intr_status); | |
1515 | ||
1516 | if (--boguscnt < 0) { | |
1517 | if (debug > 1) | |
1518 | printk(KERN_WARNING "%s: Too much work at interrupt, " | |
1519 | "status=%#8.8x.\n", | |
1520 | dev->name, intr_status); | |
1521 | break; | |
1522 | } | |
1523 | } while (1); | |
1524 | ||
1525 | if (debug > 4) | |
1526 | printk(KERN_DEBUG "%s: exiting interrupt, status=%#8.8x.\n", | |
1527 | dev->name, (int) readl(ioaddr + IntrStatus)); | |
1528 | return IRQ_RETVAL(handled); | |
1529 | } | |
1530 | ||
1531 | ||
1532 | /* This routine is logically part of the interrupt/poll handler, but separated | |
1533 | for clarity, code sharing between NAPI/non-NAPI, and better register allocation. */ | |
1534 | static int __netdev_rx(struct net_device *dev, int *quota) | |
1535 | { | |
1536 | struct netdev_private *np = netdev_priv(dev); | |
1537 | u32 desc_status; | |
1538 | int retcode = 0; | |
1539 | ||
1540 | /* If EOP is set on the next entry, it's a new packet. Send it up. */ | |
1541 | while ((desc_status = le32_to_cpu(np->rx_done_q[np->rx_done].status)) != 0) { | |
1542 | struct sk_buff *skb; | |
1543 | u16 pkt_len; | |
1544 | int entry; | |
1545 | rx_done_desc *desc = &np->rx_done_q[np->rx_done]; | |
1546 | ||
1547 | if (debug > 4) | |
1548 | printk(KERN_DEBUG " netdev_rx() status of %d was %#8.8x.\n", np->rx_done, desc_status); | |
1549 | if (!(desc_status & RxOK)) { | |
fdecea66 | 1550 | /* There was an error. */ |
1da177e4 LT |
1551 | if (debug > 2) |
1552 | printk(KERN_DEBUG " netdev_rx() Rx error was %#8.8x.\n", desc_status); | |
1553 | np->stats.rx_errors++; | |
1554 | if (desc_status & RxFIFOErr) | |
1555 | np->stats.rx_fifo_errors++; | |
1556 | goto next_rx; | |
1557 | } | |
1558 | ||
1559 | if (*quota <= 0) { /* out of rx quota */ | |
1560 | retcode = 1; | |
1561 | goto out; | |
1562 | } | |
1563 | (*quota)--; | |
1564 | ||
1565 | pkt_len = desc_status; /* Implicitly Truncate */ | |
1566 | entry = (desc_status >> 16) & 0x7ff; | |
1567 | ||
1568 | if (debug > 4) | |
1569 | printk(KERN_DEBUG " netdev_rx() normal Rx pkt length %d, quota %d.\n", pkt_len, *quota); | |
1570 | /* Check if the packet is long enough to accept without copying | |
1571 | to a minimally-sized skbuff. */ | |
1572 | if (pkt_len < rx_copybreak | |
1573 | && (skb = dev_alloc_skb(pkt_len + 2)) != NULL) { | |
1574 | skb->dev = dev; | |
1575 | skb_reserve(skb, 2); /* 16 byte align the IP header */ | |
1576 | pci_dma_sync_single_for_cpu(np->pci_dev, | |
1577 | np->rx_info[entry].mapping, | |
1578 | pkt_len, PCI_DMA_FROMDEVICE); | |
689be439 | 1579 | eth_copy_and_sum(skb, np->rx_info[entry].skb->data, pkt_len, 0); |
1da177e4 LT |
1580 | pci_dma_sync_single_for_device(np->pci_dev, |
1581 | np->rx_info[entry].mapping, | |
1582 | pkt_len, PCI_DMA_FROMDEVICE); | |
1583 | skb_put(skb, pkt_len); | |
1584 | } else { | |
1585 | pci_unmap_single(np->pci_dev, np->rx_info[entry].mapping, np->rx_buf_sz, PCI_DMA_FROMDEVICE); | |
1586 | skb = np->rx_info[entry].skb; | |
1587 | skb_put(skb, pkt_len); | |
1588 | np->rx_info[entry].skb = NULL; | |
1589 | np->rx_info[entry].mapping = 0; | |
1590 | } | |
1591 | #ifndef final_version /* Remove after testing. */ | |
1592 | /* You will want this info for the initial debug. */ | |
1593 | if (debug > 5) | |
1594 | printk(KERN_DEBUG " Rx data %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:" | |
1595 | "%2.2x %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x %2.2x%2.2x.\n", | |
1596 | skb->data[0], skb->data[1], skb->data[2], skb->data[3], | |
1597 | skb->data[4], skb->data[5], skb->data[6], skb->data[7], | |
1598 | skb->data[8], skb->data[9], skb->data[10], | |
1599 | skb->data[11], skb->data[12], skb->data[13]); | |
1600 | #endif | |
1601 | ||
1602 | skb->protocol = eth_type_trans(skb, dev); | |
fdecea66 | 1603 | #ifdef VLAN_SUPPORT |
1da177e4 LT |
1604 | if (debug > 4) |
1605 | printk(KERN_DEBUG " netdev_rx() status2 of %d was %#4.4x.\n", np->rx_done, le16_to_cpu(desc->status2)); | |
1606 | #endif | |
1da177e4 LT |
1607 | if (le16_to_cpu(desc->status2) & 0x0100) { |
1608 | skb->ip_summed = CHECKSUM_UNNECESSARY; | |
1609 | np->stats.rx_compressed++; | |
1610 | } | |
1611 | /* | |
1612 | * This feature doesn't seem to be working, at least | |
1613 | * with the two firmware versions I have. If the GFP sees | |
1614 | * an IP fragment, it either ignores it completely, or reports | |
1615 | * "bad checksum" on it. | |
1616 | * | |
1617 | * Maybe I missed something -- corrections are welcome. | |
1618 | * Until then, the printk stays. :-) -Ion | |
1619 | */ | |
1620 | else if (le16_to_cpu(desc->status2) & 0x0040) { | |
1621 | skb->ip_summed = CHECKSUM_HW; | |
1622 | skb->csum = le16_to_cpu(desc->csum); | |
1623 | printk(KERN_DEBUG "%s: checksum_hw, status2 = %#x\n", dev->name, le16_to_cpu(desc->status2)); | |
1624 | } | |
1da177e4 LT |
1625 | #ifdef VLAN_SUPPORT |
1626 | if (np->vlgrp && le16_to_cpu(desc->status2) & 0x0200) { | |
1627 | if (debug > 4) | |
1628 | printk(KERN_DEBUG " netdev_rx() vlanid = %d\n", le16_to_cpu(desc->vlanid)); | |
1629 | /* vlan_netdev_receive_skb() expects a packet with the VLAN tag stripped out */ | |
1630 | vlan_netdev_receive_skb(skb, np->vlgrp, le16_to_cpu(desc->vlanid) & VLAN_VID_MASK); | |
1631 | } else | |
1632 | #endif /* VLAN_SUPPORT */ | |
1633 | netdev_receive_skb(skb); | |
1634 | dev->last_rx = jiffies; | |
1635 | np->stats.rx_packets++; | |
1636 | ||
1637 | next_rx: | |
1638 | np->cur_rx++; | |
1639 | desc->status = 0; | |
1640 | np->rx_done = (np->rx_done + 1) % DONE_Q_SIZE; | |
1641 | } | |
1642 | writew(np->rx_done, np->base + CompletionQConsumerIdx); | |
1643 | ||
1644 | out: | |
1645 | refill_rx_ring(dev); | |
1646 | if (debug > 5) | |
1647 | printk(KERN_DEBUG " exiting netdev_rx(): %d, status of %d was %#8.8x.\n", | |
1648 | retcode, np->rx_done, desc_status); | |
1649 | return retcode; | |
1650 | } | |
1651 | ||
1652 | ||
1653 | #ifdef HAVE_NETDEV_POLL | |
1654 | static int netdev_poll(struct net_device *dev, int *budget) | |
1655 | { | |
1656 | u32 intr_status; | |
1657 | struct netdev_private *np = netdev_priv(dev); | |
1658 | void __iomem *ioaddr = np->base; | |
1659 | int retcode = 0, quota = dev->quota; | |
1660 | ||
1661 | do { | |
1662 | writel(IntrRxDone | IntrRxEmpty, ioaddr + IntrClear); | |
1663 | ||
1664 | retcode = __netdev_rx(dev, "a); | |
1665 | *budget -= (dev->quota - quota); | |
1666 | dev->quota = quota; | |
1667 | if (retcode) | |
1668 | goto out; | |
1669 | ||
1670 | intr_status = readl(ioaddr + IntrStatus); | |
1671 | } while (intr_status & (IntrRxDone | IntrRxEmpty)); | |
1672 | ||
1673 | netif_rx_complete(dev); | |
1674 | intr_status = readl(ioaddr + IntrEnable); | |
1675 | intr_status |= IntrRxDone | IntrRxEmpty; | |
1676 | writel(intr_status, ioaddr + IntrEnable); | |
1677 | ||
1678 | out: | |
1679 | if (debug > 5) | |
1680 | printk(KERN_DEBUG " exiting netdev_poll(): %d.\n", retcode); | |
1681 | ||
1682 | /* Restart Rx engine if stopped. */ | |
1683 | return retcode; | |
1684 | } | |
1685 | #endif /* HAVE_NETDEV_POLL */ | |
1686 | ||
1687 | ||
1688 | static void refill_rx_ring(struct net_device *dev) | |
1689 | { | |
1690 | struct netdev_private *np = netdev_priv(dev); | |
1691 | struct sk_buff *skb; | |
1692 | int entry = -1; | |
1693 | ||
1694 | /* Refill the Rx ring buffers. */ | |
1695 | for (; np->cur_rx - np->dirty_rx > 0; np->dirty_rx++) { | |
1696 | entry = np->dirty_rx % RX_RING_SIZE; | |
1697 | if (np->rx_info[entry].skb == NULL) { | |
1698 | skb = dev_alloc_skb(np->rx_buf_sz); | |
1699 | np->rx_info[entry].skb = skb; | |
1700 | if (skb == NULL) | |
1701 | break; /* Better luck next round. */ | |
1702 | np->rx_info[entry].mapping = | |
689be439 | 1703 | pci_map_single(np->pci_dev, skb->data, np->rx_buf_sz, PCI_DMA_FROMDEVICE); |
1da177e4 LT |
1704 | skb->dev = dev; /* Mark as being used by this device. */ |
1705 | np->rx_ring[entry].rxaddr = | |
1706 | cpu_to_dma(np->rx_info[entry].mapping | RxDescValid); | |
1707 | } | |
1708 | if (entry == RX_RING_SIZE - 1) | |
1709 | np->rx_ring[entry].rxaddr |= cpu_to_dma(RxDescEndRing); | |
1710 | } | |
1711 | if (entry >= 0) | |
1712 | writew(entry, np->base + RxDescQIdx); | |
1713 | } | |
1714 | ||
1715 | ||
1716 | static void netdev_media_change(struct net_device *dev) | |
1717 | { | |
1718 | struct netdev_private *np = netdev_priv(dev); | |
1719 | void __iomem *ioaddr = np->base; | |
1720 | u16 reg0, reg1, reg4, reg5; | |
1721 | u32 new_tx_mode; | |
1722 | u32 new_intr_timer_ctrl; | |
1723 | ||
1724 | /* reset status first */ | |
1725 | mdio_read(dev, np->phys[0], MII_BMCR); | |
1726 | mdio_read(dev, np->phys[0], MII_BMSR); | |
1727 | ||
1728 | reg0 = mdio_read(dev, np->phys[0], MII_BMCR); | |
1729 | reg1 = mdio_read(dev, np->phys[0], MII_BMSR); | |
1730 | ||
1731 | if (reg1 & BMSR_LSTATUS) { | |
1732 | /* link is up */ | |
1733 | if (reg0 & BMCR_ANENABLE) { | |
1734 | /* autonegotiation is enabled */ | |
1735 | reg4 = mdio_read(dev, np->phys[0], MII_ADVERTISE); | |
1736 | reg5 = mdio_read(dev, np->phys[0], MII_LPA); | |
1737 | if (reg4 & ADVERTISE_100FULL && reg5 & LPA_100FULL) { | |
1738 | np->speed100 = 1; | |
1739 | np->mii_if.full_duplex = 1; | |
1740 | } else if (reg4 & ADVERTISE_100HALF && reg5 & LPA_100HALF) { | |
1741 | np->speed100 = 1; | |
1742 | np->mii_if.full_duplex = 0; | |
1743 | } else if (reg4 & ADVERTISE_10FULL && reg5 & LPA_10FULL) { | |
1744 | np->speed100 = 0; | |
1745 | np->mii_if.full_duplex = 1; | |
1746 | } else { | |
1747 | np->speed100 = 0; | |
1748 | np->mii_if.full_duplex = 0; | |
1749 | } | |
1750 | } else { | |
1751 | /* autonegotiation is disabled */ | |
1752 | if (reg0 & BMCR_SPEED100) | |
1753 | np->speed100 = 1; | |
1754 | else | |
1755 | np->speed100 = 0; | |
1756 | if (reg0 & BMCR_FULLDPLX) | |
1757 | np->mii_if.full_duplex = 1; | |
1758 | else | |
1759 | np->mii_if.full_duplex = 0; | |
1760 | } | |
1761 | netif_carrier_on(dev); | |
1762 | printk(KERN_DEBUG "%s: Link is up, running at %sMbit %s-duplex\n", | |
1763 | dev->name, | |
1764 | np->speed100 ? "100" : "10", | |
1765 | np->mii_if.full_duplex ? "full" : "half"); | |
1766 | ||
1767 | new_tx_mode = np->tx_mode & ~FullDuplex; /* duplex setting */ | |
1768 | if (np->mii_if.full_duplex) | |
1769 | new_tx_mode |= FullDuplex; | |
1770 | if (np->tx_mode != new_tx_mode) { | |
1771 | np->tx_mode = new_tx_mode; | |
1772 | writel(np->tx_mode | MiiSoftReset, ioaddr + TxMode); | |
1773 | udelay(1000); | |
1774 | writel(np->tx_mode, ioaddr + TxMode); | |
1775 | } | |
1776 | ||
1777 | new_intr_timer_ctrl = np->intr_timer_ctrl & ~Timer10X; | |
1778 | if (np->speed100) | |
1779 | new_intr_timer_ctrl |= Timer10X; | |
1780 | if (np->intr_timer_ctrl != new_intr_timer_ctrl) { | |
1781 | np->intr_timer_ctrl = new_intr_timer_ctrl; | |
1782 | writel(new_intr_timer_ctrl, ioaddr + IntrTimerCtrl); | |
1783 | } | |
1784 | } else { | |
1785 | netif_carrier_off(dev); | |
1786 | printk(KERN_DEBUG "%s: Link is down\n", dev->name); | |
1787 | } | |
1788 | } | |
1789 | ||
1790 | ||
1791 | static void netdev_error(struct net_device *dev, int intr_status) | |
1792 | { | |
1793 | struct netdev_private *np = netdev_priv(dev); | |
1794 | ||
1795 | /* Came close to underrunning the Tx FIFO, increase threshold. */ | |
1796 | if (intr_status & IntrTxDataLow) { | |
1797 | if (np->tx_threshold <= PKT_BUF_SZ / 16) { | |
1798 | writel(++np->tx_threshold, np->base + TxThreshold); | |
1799 | printk(KERN_NOTICE "%s: PCI bus congestion, increasing Tx FIFO threshold to %d bytes\n", | |
1800 | dev->name, np->tx_threshold * 16); | |
1801 | } else | |
1802 | printk(KERN_WARNING "%s: PCI Tx underflow -- adapter is probably malfunctioning\n", dev->name); | |
1803 | } | |
1804 | if (intr_status & IntrRxGFPDead) { | |
1805 | np->stats.rx_fifo_errors++; | |
1806 | np->stats.rx_errors++; | |
1807 | } | |
1808 | if (intr_status & (IntrNoTxCsum | IntrDMAErr)) { | |
1809 | np->stats.tx_fifo_errors++; | |
1810 | np->stats.tx_errors++; | |
1811 | } | |
1812 | if ((intr_status & ~(IntrNormalMask | IntrAbnormalSummary | IntrLinkChange | IntrStatsMax | IntrTxDataLow | IntrRxGFPDead | IntrNoTxCsum | IntrPCIPad)) && debug) | |
1813 | printk(KERN_ERR "%s: Something Wicked happened! %#8.8x.\n", | |
1814 | dev->name, intr_status); | |
1815 | } | |
1816 | ||
1817 | ||
1818 | static struct net_device_stats *get_stats(struct net_device *dev) | |
1819 | { | |
1820 | struct netdev_private *np = netdev_priv(dev); | |
1821 | void __iomem *ioaddr = np->base; | |
1822 | ||
1823 | /* This adapter architecture needs no SMP locks. */ | |
1824 | np->stats.tx_bytes = readl(ioaddr + 0x57010); | |
1825 | np->stats.rx_bytes = readl(ioaddr + 0x57044); | |
1826 | np->stats.tx_packets = readl(ioaddr + 0x57000); | |
1827 | np->stats.tx_aborted_errors = | |
1828 | readl(ioaddr + 0x57024) + readl(ioaddr + 0x57028); | |
1829 | np->stats.tx_window_errors = readl(ioaddr + 0x57018); | |
1830 | np->stats.collisions = | |
1831 | readl(ioaddr + 0x57004) + readl(ioaddr + 0x57008); | |
1832 | ||
1833 | /* The chip only need report frame silently dropped. */ | |
1834 | np->stats.rx_dropped += readw(ioaddr + RxDMAStatus); | |
1835 | writew(0, ioaddr + RxDMAStatus); | |
1836 | np->stats.rx_crc_errors = readl(ioaddr + 0x5703C); | |
1837 | np->stats.rx_frame_errors = readl(ioaddr + 0x57040); | |
1838 | np->stats.rx_length_errors = readl(ioaddr + 0x57058); | |
1839 | np->stats.rx_missed_errors = readl(ioaddr + 0x5707C); | |
1840 | ||
1841 | return &np->stats; | |
1842 | } | |
1843 | ||
1844 | ||
1da177e4 LT |
1845 | static void set_rx_mode(struct net_device *dev) |
1846 | { | |
1847 | struct netdev_private *np = netdev_priv(dev); | |
1848 | void __iomem *ioaddr = np->base; | |
1849 | u32 rx_mode = MinVLANPrio; | |
1850 | struct dev_mc_list *mclist; | |
1851 | int i; | |
1852 | #ifdef VLAN_SUPPORT | |
1853 | ||
1854 | rx_mode |= VlanMode; | |
1855 | if (np->vlgrp) { | |
1856 | int vlan_count = 0; | |
1857 | void __iomem *filter_addr = ioaddr + HashTable + 8; | |
1858 | for (i = 0; i < VLAN_VID_MASK; i++) { | |
1859 | if (np->vlgrp->vlan_devices[i]) { | |
1860 | if (vlan_count >= 32) | |
1861 | break; | |
1862 | writew(cpu_to_be16(i), filter_addr); | |
1863 | filter_addr += 16; | |
1864 | vlan_count++; | |
1865 | } | |
1866 | } | |
1867 | if (i == VLAN_VID_MASK) { | |
1868 | rx_mode |= PerfectFilterVlan; | |
1869 | while (vlan_count < 32) { | |
1870 | writew(0, filter_addr); | |
1871 | filter_addr += 16; | |
1872 | vlan_count++; | |
1873 | } | |
1874 | } | |
1875 | } | |
1876 | #endif /* VLAN_SUPPORT */ | |
1877 | ||
1878 | if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */ | |
1879 | rx_mode |= AcceptAll; | |
1880 | } else if ((dev->mc_count > multicast_filter_limit) | |
1881 | || (dev->flags & IFF_ALLMULTI)) { | |
1882 | /* Too many to match, or accept all multicasts. */ | |
1883 | rx_mode |= AcceptBroadcast|AcceptAllMulticast|PerfectFilter; | |
1884 | } else if (dev->mc_count <= 14) { | |
1885 | /* Use the 16 element perfect filter, skip first two entries. */ | |
1886 | void __iomem *filter_addr = ioaddr + PerfFilterTable + 2 * 16; | |
1887 | u16 *eaddrs; | |
1888 | for (i = 2, mclist = dev->mc_list; mclist && i < dev->mc_count + 2; | |
1889 | i++, mclist = mclist->next) { | |
1890 | eaddrs = (u16 *)mclist->dmi_addr; | |
1891 | writew(cpu_to_be16(eaddrs[2]), filter_addr); filter_addr += 4; | |
1892 | writew(cpu_to_be16(eaddrs[1]), filter_addr); filter_addr += 4; | |
1893 | writew(cpu_to_be16(eaddrs[0]), filter_addr); filter_addr += 8; | |
1894 | } | |
1895 | eaddrs = (u16 *)dev->dev_addr; | |
1896 | while (i++ < 16) { | |
1897 | writew(cpu_to_be16(eaddrs[0]), filter_addr); filter_addr += 4; | |
1898 | writew(cpu_to_be16(eaddrs[1]), filter_addr); filter_addr += 4; | |
1899 | writew(cpu_to_be16(eaddrs[2]), filter_addr); filter_addr += 8; | |
1900 | } | |
1901 | rx_mode |= AcceptBroadcast|PerfectFilter; | |
1902 | } else { | |
1903 | /* Must use a multicast hash table. */ | |
1904 | void __iomem *filter_addr; | |
1905 | u16 *eaddrs; | |
1906 | u16 mc_filter[32] __attribute__ ((aligned(sizeof(long)))); /* Multicast hash filter */ | |
1907 | ||
1908 | memset(mc_filter, 0, sizeof(mc_filter)); | |
1909 | for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count; | |
1910 | i++, mclist = mclist->next) { | |
fdecea66 JG |
1911 | /* The chip uses the upper 9 CRC bits |
1912 | as index into the hash table */ | |
1da177e4 LT |
1913 | int bit_nr = ether_crc_le(ETH_ALEN, mclist->dmi_addr) >> 23; |
1914 | __u32 *fptr = (__u32 *) &mc_filter[(bit_nr >> 4) & ~1]; | |
1915 | ||
1916 | *fptr |= cpu_to_le32(1 << (bit_nr & 31)); | |
1917 | } | |
1918 | /* Clear the perfect filter list, skip first two entries. */ | |
1919 | filter_addr = ioaddr + PerfFilterTable + 2 * 16; | |
1920 | eaddrs = (u16 *)dev->dev_addr; | |
1921 | for (i = 2; i < 16; i++) { | |
1922 | writew(cpu_to_be16(eaddrs[0]), filter_addr); filter_addr += 4; | |
1923 | writew(cpu_to_be16(eaddrs[1]), filter_addr); filter_addr += 4; | |
1924 | writew(cpu_to_be16(eaddrs[2]), filter_addr); filter_addr += 8; | |
1925 | } | |
1926 | for (filter_addr = ioaddr + HashTable, i = 0; i < 32; filter_addr+= 16, i++) | |
1927 | writew(mc_filter[i], filter_addr); | |
1928 | rx_mode |= AcceptBroadcast|PerfectFilter|HashFilter; | |
1929 | } | |
1930 | writel(rx_mode, ioaddr + RxFilterMode); | |
1931 | } | |
1932 | ||
1933 | static int check_if_running(struct net_device *dev) | |
1934 | { | |
1935 | if (!netif_running(dev)) | |
1936 | return -EINVAL; | |
1937 | return 0; | |
1938 | } | |
1939 | ||
1940 | static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) | |
1941 | { | |
1942 | struct netdev_private *np = netdev_priv(dev); | |
1943 | strcpy(info->driver, DRV_NAME); | |
1944 | strcpy(info->version, DRV_VERSION); | |
fdecea66 | 1945 | strcpy(info->bus_info, pci_name(np->pci_dev)); |
1da177e4 LT |
1946 | } |
1947 | ||
1948 | static int get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) | |
1949 | { | |
1950 | struct netdev_private *np = netdev_priv(dev); | |
1951 | spin_lock_irq(&np->lock); | |
1952 | mii_ethtool_gset(&np->mii_if, ecmd); | |
1953 | spin_unlock_irq(&np->lock); | |
1954 | return 0; | |
1955 | } | |
1956 | ||
1957 | static int set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) | |
1958 | { | |
1959 | struct netdev_private *np = netdev_priv(dev); | |
1960 | int res; | |
1961 | spin_lock_irq(&np->lock); | |
1962 | res = mii_ethtool_sset(&np->mii_if, ecmd); | |
1963 | spin_unlock_irq(&np->lock); | |
1964 | check_duplex(dev); | |
1965 | return res; | |
1966 | } | |
1967 | ||
1968 | static int nway_reset(struct net_device *dev) | |
1969 | { | |
1970 | struct netdev_private *np = netdev_priv(dev); | |
1971 | return mii_nway_restart(&np->mii_if); | |
1972 | } | |
1973 | ||
1974 | static u32 get_link(struct net_device *dev) | |
1975 | { | |
1976 | struct netdev_private *np = netdev_priv(dev); | |
1977 | return mii_link_ok(&np->mii_if); | |
1978 | } | |
1979 | ||
1980 | static u32 get_msglevel(struct net_device *dev) | |
1981 | { | |
1982 | return debug; | |
1983 | } | |
1984 | ||
1985 | static void set_msglevel(struct net_device *dev, u32 val) | |
1986 | { | |
1987 | debug = val; | |
1988 | } | |
1989 | ||
1990 | static struct ethtool_ops ethtool_ops = { | |
1991 | .begin = check_if_running, | |
1992 | .get_drvinfo = get_drvinfo, | |
1993 | .get_settings = get_settings, | |
1994 | .set_settings = set_settings, | |
1995 | .nway_reset = nway_reset, | |
1996 | .get_link = get_link, | |
1997 | .get_msglevel = get_msglevel, | |
1998 | .set_msglevel = set_msglevel, | |
1999 | }; | |
2000 | ||
2001 | static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) | |
2002 | { | |
2003 | struct netdev_private *np = netdev_priv(dev); | |
2004 | struct mii_ioctl_data *data = if_mii(rq); | |
2005 | int rc; | |
2006 | ||
2007 | if (!netif_running(dev)) | |
2008 | return -EINVAL; | |
2009 | ||
2010 | spin_lock_irq(&np->lock); | |
2011 | rc = generic_mii_ioctl(&np->mii_if, data, cmd, NULL); | |
2012 | spin_unlock_irq(&np->lock); | |
2013 | ||
2014 | if ((cmd == SIOCSMIIREG) && (data->phy_id == np->phys[0])) | |
2015 | check_duplex(dev); | |
2016 | ||
2017 | return rc; | |
2018 | } | |
2019 | ||
2020 | static int netdev_close(struct net_device *dev) | |
2021 | { | |
2022 | struct netdev_private *np = netdev_priv(dev); | |
2023 | void __iomem *ioaddr = np->base; | |
2024 | int i; | |
2025 | ||
2026 | netif_stop_queue(dev); | |
1da177e4 LT |
2027 | |
2028 | if (debug > 1) { | |
2029 | printk(KERN_DEBUG "%s: Shutting down ethercard, Intr status %#8.8x.\n", | |
2030 | dev->name, (int) readl(ioaddr + IntrStatus)); | |
2031 | printk(KERN_DEBUG "%s: Queue pointers were Tx %d / %d, Rx %d / %d.\n", | |
2032 | dev->name, np->cur_tx, np->dirty_tx, | |
2033 | np->cur_rx, np->dirty_rx); | |
2034 | } | |
2035 | ||
2036 | /* Disable interrupts by clearing the interrupt mask. */ | |
2037 | writel(0, ioaddr + IntrEnable); | |
2038 | ||
2039 | /* Stop the chip's Tx and Rx processes. */ | |
2040 | writel(0, ioaddr + GenCtrl); | |
2041 | readl(ioaddr + GenCtrl); | |
2042 | ||
2043 | if (debug > 5) { | |
2044 | printk(KERN_DEBUG" Tx ring at %#llx:\n", | |
2045 | (long long) np->tx_ring_dma); | |
2046 | for (i = 0; i < 8 /* TX_RING_SIZE is huge! */; i++) | |
2047 | printk(KERN_DEBUG " #%d desc. %#8.8x %#llx -> %#8.8x.\n", | |
2048 | i, le32_to_cpu(np->tx_ring[i].status), | |
2049 | (long long) dma_to_cpu(np->tx_ring[i].addr), | |
2050 | le32_to_cpu(np->tx_done_q[i].status)); | |
2051 | printk(KERN_DEBUG " Rx ring at %#llx -> %p:\n", | |
2052 | (long long) np->rx_ring_dma, np->rx_done_q); | |
2053 | if (np->rx_done_q) | |
2054 | for (i = 0; i < 8 /* RX_RING_SIZE */; i++) { | |
2055 | printk(KERN_DEBUG " #%d desc. %#llx -> %#8.8x\n", | |
2056 | i, (long long) dma_to_cpu(np->rx_ring[i].rxaddr), le32_to_cpu(np->rx_done_q[i].status)); | |
2057 | } | |
2058 | } | |
2059 | ||
2060 | free_irq(dev->irq, dev); | |
2061 | ||
2062 | /* Free all the skbuffs in the Rx queue. */ | |
2063 | for (i = 0; i < RX_RING_SIZE; i++) { | |
2064 | np->rx_ring[i].rxaddr = cpu_to_dma(0xBADF00D0); /* An invalid address. */ | |
2065 | if (np->rx_info[i].skb != NULL) { | |
2066 | pci_unmap_single(np->pci_dev, np->rx_info[i].mapping, np->rx_buf_sz, PCI_DMA_FROMDEVICE); | |
2067 | dev_kfree_skb(np->rx_info[i].skb); | |
2068 | } | |
2069 | np->rx_info[i].skb = NULL; | |
2070 | np->rx_info[i].mapping = 0; | |
2071 | } | |
2072 | for (i = 0; i < TX_RING_SIZE; i++) { | |
2073 | struct sk_buff *skb = np->tx_info[i].skb; | |
2074 | if (skb == NULL) | |
2075 | continue; | |
2076 | pci_unmap_single(np->pci_dev, | |
2077 | np->tx_info[i].mapping, | |
2078 | skb_first_frag_len(skb), PCI_DMA_TODEVICE); | |
2079 | np->tx_info[i].mapping = 0; | |
2080 | dev_kfree_skb(skb); | |
2081 | np->tx_info[i].skb = NULL; | |
2082 | } | |
2083 | ||
2084 | return 0; | |
2085 | } | |
2086 | ||
d4fbeabb SR |
2087 | #ifdef CONFIG_PM |
2088 | static int starfire_suspend(struct pci_dev *pdev, pm_message_t state) | |
2089 | { | |
2090 | struct net_device *dev = pci_get_drvdata(pdev); | |
2091 | ||
2092 | if (netif_running(dev)) { | |
2093 | netif_device_detach(dev); | |
2094 | netdev_close(dev); | |
2095 | } | |
2096 | ||
2097 | pci_save_state(pdev); | |
2098 | pci_set_power_state(pdev, pci_choose_state(pdev,state)); | |
2099 | ||
2100 | return 0; | |
2101 | } | |
2102 | ||
2103 | static int starfire_resume(struct pci_dev *pdev) | |
2104 | { | |
2105 | struct net_device *dev = pci_get_drvdata(pdev); | |
2106 | ||
2107 | pci_set_power_state(pdev, PCI_D0); | |
2108 | pci_restore_state(pdev); | |
2109 | ||
2110 | if (netif_running(dev)) { | |
2111 | netdev_open(dev); | |
2112 | netif_device_attach(dev); | |
2113 | } | |
2114 | ||
2115 | return 0; | |
2116 | } | |
2117 | #endif /* CONFIG_PM */ | |
2118 | ||
1da177e4 LT |
2119 | |
2120 | static void __devexit starfire_remove_one (struct pci_dev *pdev) | |
2121 | { | |
2122 | struct net_device *dev = pci_get_drvdata(pdev); | |
2123 | struct netdev_private *np = netdev_priv(dev); | |
2124 | ||
2125 | if (!dev) | |
2126 | BUG(); | |
2127 | ||
2128 | unregister_netdev(dev); | |
2129 | ||
2130 | if (np->queue_mem) | |
2131 | pci_free_consistent(pdev, np->queue_mem_size, np->queue_mem, np->queue_mem_dma); | |
2132 | ||
2133 | ||
2134 | /* XXX: add wakeup code -- requires firmware for MagicPacket */ | |
2135 | pci_set_power_state(pdev, PCI_D3hot); /* go to sleep in D3 mode */ | |
2136 | pci_disable_device(pdev); | |
2137 | ||
2138 | iounmap(np->base); | |
2139 | pci_release_regions(pdev); | |
2140 | ||
2141 | pci_set_drvdata(pdev, NULL); | |
2142 | free_netdev(dev); /* Will also free np!! */ | |
2143 | } | |
2144 | ||
2145 | ||
2146 | static struct pci_driver starfire_driver = { | |
2147 | .name = DRV_NAME, | |
2148 | .probe = starfire_init_one, | |
2149 | .remove = __devexit_p(starfire_remove_one), | |
d4fbeabb SR |
2150 | #ifdef CONFIG_PM |
2151 | .suspend = starfire_suspend, | |
2152 | .resume = starfire_resume, | |
2153 | #endif /* CONFIG_PM */ | |
1da177e4 LT |
2154 | .id_table = starfire_pci_tbl, |
2155 | }; | |
2156 | ||
2157 | ||
2158 | static int __init starfire_init (void) | |
2159 | { | |
2160 | /* when a module, this is printed whether or not devices are found in probe */ | |
2161 | #ifdef MODULE | |
2162 | printk(version); | |
fdecea66 JG |
2163 | #ifdef HAVE_NETDEV_POLL |
2164 | printk(KERN_INFO DRV_NAME ": polling (NAPI) enabled\n"); | |
2165 | #else | |
2166 | printk(KERN_INFO DRV_NAME ": polling (NAPI) disabled\n"); | |
1da177e4 | 2167 | #endif |
fdecea66 JG |
2168 | #endif |
2169 | ||
1da177e4 | 2170 | /* we can do this test only at run-time... sigh */ |
67974231 IB |
2171 | if (sizeof(dma_addr_t) != sizeof(netdrv_addr_t)) { |
2172 | printk("This driver has dma_addr_t issues, please send email to maintainer\n"); | |
1da177e4 LT |
2173 | return -ENODEV; |
2174 | } | |
67974231 | 2175 | |
1da177e4 LT |
2176 | return pci_module_init (&starfire_driver); |
2177 | } | |
2178 | ||
2179 | ||
2180 | static void __exit starfire_cleanup (void) | |
2181 | { | |
2182 | pci_unregister_driver (&starfire_driver); | |
2183 | } | |
2184 | ||
2185 | ||
2186 | module_init(starfire_init); | |
2187 | module_exit(starfire_cleanup); | |
2188 | ||
2189 | ||
2190 | /* | |
2191 | * Local variables: | |
2192 | * c-basic-offset: 8 | |
2193 | * tab-width: 8 | |
2194 | * End: | |
2195 | */ |