Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * olympic.c (c) 1999 Peter De Schrijver All Rights Reserved | |
3 | * 1999/2000 Mike Phillips (mikep@linuxtr.net) | |
4 | * | |
5 | * Linux driver for IBM PCI tokenring cards based on the Pit/Pit-Phy/Olympic | |
6 | * chipset. | |
7 | * | |
8 | * Base Driver Skeleton: | |
9 | * Written 1993-94 by Donald Becker. | |
10 | * | |
11 | * Copyright 1993 United States Government as represented by the | |
12 | * Director, National Security Agency. | |
13 | * | |
14 | * Thanks to Erik De Cock, Adrian Bridgett and Frank Fiene for their | |
15 | * assistance and perserverance with the testing of this driver. | |
16 | * | |
17 | * This software may be used and distributed according to the terms | |
18 | * of the GNU General Public License, incorporated herein by reference. | |
19 | * | |
20 | * 4/27/99 - Alpha Release 0.1.0 | |
21 | * First release to the public | |
22 | * | |
23 | * 6/8/99 - Official Release 0.2.0 | |
24 | * Merged into the kernel code | |
25 | * 8/18/99 - Updated driver for 2.3.13 kernel to use new pci | |
26 | * resource. Driver also reports the card name returned by | |
27 | * the pci resource. | |
28 | * 1/11/00 - Added spinlocks for smp | |
29 | * 2/23/00 - Updated to dev_kfree_irq | |
30 | * 3/10/00 - Fixed FDX enable which triggered other bugs also | |
31 | * squashed. | |
32 | * 5/20/00 - Changes to handle Olympic on LinuxPPC. Endian changes. | |
33 | * The odd thing about the changes is that the fix for | |
34 | * endian issues with the big-endian data in the arb, asb... | |
35 | * was to always swab() the bytes, no matter what CPU. | |
36 | * That's because the read[wl]() functions always swap the | |
37 | * bytes on the way in on PPC. | |
38 | * Fixing the hardware descriptors was another matter, | |
39 | * because they weren't going through read[wl](), there all | |
40 | * the results had to be in memory in le32 values. kdaaker | |
41 | * | |
42 | * 12/23/00 - Added minimal Cardbus support (Thanks Donald). | |
43 | * | |
44 | * 03/09/01 - Add new pci api, dev_base_lock, general clean up. | |
45 | * | |
46 | * 03/27/01 - Add new dma pci (Thanks to Kyle Lucke) and alloc_trdev | |
47 | * Change proc_fs behaviour, now one entry per adapter. | |
48 | * | |
49 | * 04/09/01 - Couple of bug fixes to the dma unmaps and ejecting the | |
50 | * adapter when live does not take the system down with it. | |
51 | * | |
52 | * 06/02/01 - Clean up, copy skb for small packets | |
53 | * | |
54 | * 06/22/01 - Add EISR error handling routines | |
55 | * | |
56 | * 07/19/01 - Improve bad LAA reporting, strip out freemem | |
57 | * into a separate function, its called from 3 | |
58 | * different places now. | |
59 | * 02/09/02 - Replaced sleep_on. | |
60 | * 03/01/02 - Replace access to several registers from 32 bit to | |
61 | * 16 bit. Fixes alignment errors on PPC 64 bit machines. | |
62 | * Thanks to Al Trautman for this one. | |
63 | * 03/10/02 - Fix BUG in arb_cmd. Bug was there all along but was | |
64 | * silently ignored until the error checking code | |
65 | * went into version 1.0.0 | |
66 | * 06/04/02 - Add correct start up sequence for the cardbus adapters. | |
67 | * Required for strict compliance with pci power mgmt specs. | |
68 | * To Do: | |
69 | * | |
70 | * Wake on lan | |
71 | * | |
72 | * If Problems do Occur | |
73 | * Most problems can be rectified by either closing and opening the interface | |
74 | * (ifconfig down and up) or rmmod and insmod'ing the driver (a bit difficult | |
75 | * if compiled into the kernel). | |
76 | */ | |
77 | ||
78 | /* Change OLYMPIC_DEBUG to 1 to get verbose, and I mean really verbose, messages */ | |
79 | ||
80 | #define OLYMPIC_DEBUG 0 | |
81 | ||
82 | ||
83 | #include <linux/config.h> | |
84 | #include <linux/module.h> | |
85 | #include <linux/kernel.h> | |
86 | #include <linux/errno.h> | |
87 | #include <linux/timer.h> | |
88 | #include <linux/in.h> | |
89 | #include <linux/ioport.h> | |
90 | #include <linux/string.h> | |
91 | #include <linux/proc_fs.h> | |
92 | #include <linux/ptrace.h> | |
93 | #include <linux/skbuff.h> | |
94 | #include <linux/interrupt.h> | |
95 | #include <linux/delay.h> | |
96 | #include <linux/netdevice.h> | |
97 | #include <linux/trdevice.h> | |
98 | #include <linux/stddef.h> | |
99 | #include <linux/init.h> | |
100 | #include <linux/pci.h> | |
101 | #include <linux/spinlock.h> | |
102 | #include <linux/bitops.h> | |
103 | ||
104 | #include <net/checksum.h> | |
105 | ||
106 | #include <asm/io.h> | |
107 | #include <asm/system.h> | |
108 | ||
109 | #include "olympic.h" | |
110 | ||
111 | /* I've got to put some intelligence into the version number so that Peter and I know | |
112 | * which version of the code somebody has got. | |
113 | * Version Number = a.b.c.d where a.b.c is the level of code and d is the latest author. | |
114 | * So 0.0.1.pds = Peter, 0.0.1.mlp = Mike | |
115 | * | |
116 | * Official releases will only have an a.b.c version number format. | |
117 | */ | |
118 | ||
119 | static char version[] __devinitdata = | |
120 | "Olympic.c v1.0.5 6/04/02 - Peter De Schrijver & Mike Phillips" ; | |
121 | ||
122 | static char *open_maj_error[] = {"No error", "Lobe Media Test", "Physical Insertion", | |
123 | "Address Verification", "Neighbor Notification (Ring Poll)", | |
124 | "Request Parameters","FDX Registration Request", | |
125 | "FDX Duplicate Address Check", "Station registration Query Wait", | |
126 | "Unknown stage"}; | |
127 | ||
128 | static char *open_min_error[] = {"No error", "Function Failure", "Signal Lost", "Wire Fault", | |
129 | "Ring Speed Mismatch", "Timeout","Ring Failure","Ring Beaconing", | |
130 | "Duplicate Node Address","Request Parameters","Remove Received", | |
131 | "Reserved", "Reserved", "No Monitor Detected for RPL", | |
132 | "Monitor Contention failer for RPL", "FDX Protocol Error"}; | |
133 | ||
134 | /* Module paramters */ | |
135 | ||
136 | MODULE_AUTHOR("Mike Phillips <mikep@linuxtr.net>") ; | |
137 | MODULE_DESCRIPTION("Olympic PCI/Cardbus Chipset Driver") ; | |
138 | ||
139 | /* Ring Speed 0,4,16,100 | |
140 | * 0 = Autosense | |
141 | * 4,16 = Selected speed only, no autosense | |
142 | * This allows the card to be the first on the ring | |
143 | * and become the active monitor. | |
144 | * 100 = Nothing at present, 100mbps is autodetected | |
145 | * if FDX is turned on. May be implemented in the future to | |
146 | * fail if 100mpbs is not detected. | |
147 | * | |
148 | * WARNING: Some hubs will allow you to insert | |
149 | * at the wrong speed | |
150 | */ | |
151 | ||
152 | static int ringspeed[OLYMPIC_MAX_ADAPTERS] = {0,} ; | |
153 | module_param_array(ringspeed, int, NULL, 0); | |
154 | ||
155 | /* Packet buffer size */ | |
156 | ||
157 | static int pkt_buf_sz[OLYMPIC_MAX_ADAPTERS] = {0,} ; | |
158 | module_param_array(pkt_buf_sz, int, NULL, 0) ; | |
159 | ||
160 | /* Message Level */ | |
161 | ||
162 | static int message_level[OLYMPIC_MAX_ADAPTERS] = {0,} ; | |
163 | module_param_array(message_level, int, NULL, 0) ; | |
164 | ||
165 | /* Change network_monitor to receive mac frames through the arb channel. | |
166 | * Will also create a /proc/net/olympic_tr%d entry, where %d is the tr | |
167 | * device, i.e. tr0, tr1 etc. | |
168 | * Intended to be used to create a ring-error reporting network module | |
169 | * i.e. it will give you the source address of beaconers on the ring | |
170 | */ | |
171 | static int network_monitor[OLYMPIC_MAX_ADAPTERS] = {0,}; | |
172 | module_param_array(network_monitor, int, NULL, 0); | |
173 | ||
174 | static struct pci_device_id olympic_pci_tbl[] = { | |
175 | {PCI_VENDOR_ID_IBM,PCI_DEVICE_ID_IBM_TR_WAKE,PCI_ANY_ID,PCI_ANY_ID,}, | |
176 | { } /* Terminating Entry */ | |
177 | }; | |
178 | MODULE_DEVICE_TABLE(pci,olympic_pci_tbl) ; | |
179 | ||
180 | ||
181 | static int olympic_probe(struct pci_dev *pdev, const struct pci_device_id *ent); | |
182 | static int olympic_init(struct net_device *dev); | |
183 | static int olympic_open(struct net_device *dev); | |
184 | static int olympic_xmit(struct sk_buff *skb, struct net_device *dev); | |
185 | static int olympic_close(struct net_device *dev); | |
186 | static void olympic_set_rx_mode(struct net_device *dev); | |
187 | static void olympic_freemem(struct net_device *dev) ; | |
188 | static irqreturn_t olympic_interrupt(int irq, void *dev_id, struct pt_regs *regs); | |
189 | static struct net_device_stats * olympic_get_stats(struct net_device *dev); | |
190 | static int olympic_set_mac_address(struct net_device *dev, void *addr) ; | |
191 | static void olympic_arb_cmd(struct net_device *dev); | |
192 | static int olympic_change_mtu(struct net_device *dev, int mtu); | |
193 | static void olympic_srb_bh(struct net_device *dev) ; | |
194 | static void olympic_asb_bh(struct net_device *dev) ; | |
195 | static int olympic_proc_info(char *buffer, char **start, off_t offset, int length, int *eof, void *data) ; | |
196 | ||
197 | static int __devinit olympic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) | |
198 | { | |
199 | struct net_device *dev ; | |
200 | struct olympic_private *olympic_priv; | |
201 | static int card_no = -1 ; | |
202 | int i ; | |
203 | ||
204 | card_no++ ; | |
205 | ||
206 | if ((i = pci_enable_device(pdev))) { | |
207 | return i ; | |
208 | } | |
209 | ||
210 | pci_set_master(pdev); | |
211 | ||
212 | if ((i = pci_request_regions(pdev,"olympic"))) { | |
213 | goto op_disable_dev; | |
214 | } | |
215 | ||
216 | dev = alloc_trdev(sizeof(struct olympic_private)) ; | |
217 | if (!dev) { | |
218 | i = -ENOMEM; | |
219 | goto op_free_dev; | |
220 | } | |
221 | ||
222 | olympic_priv = dev->priv ; | |
223 | ||
224 | spin_lock_init(&olympic_priv->olympic_lock) ; | |
225 | ||
226 | init_waitqueue_head(&olympic_priv->srb_wait); | |
227 | init_waitqueue_head(&olympic_priv->trb_wait); | |
228 | #if OLYMPIC_DEBUG | |
229 | printk(KERN_INFO "pci_device: %p, dev:%p, dev->priv: %p\n", pdev, dev, dev->priv); | |
230 | #endif | |
231 | dev->irq=pdev->irq; | |
232 | dev->base_addr=pci_resource_start(pdev, 0); | |
233 | olympic_priv->olympic_card_name = pci_name(pdev); | |
234 | olympic_priv->pdev = pdev; | |
235 | olympic_priv->olympic_mmio = ioremap(pci_resource_start(pdev,1),256); | |
236 | olympic_priv->olympic_lap = ioremap(pci_resource_start(pdev,2),2048); | |
237 | if (!olympic_priv->olympic_mmio || !olympic_priv->olympic_lap) { | |
238 | goto op_free_iomap; | |
239 | } | |
240 | ||
241 | if ((pkt_buf_sz[card_no] < 100) || (pkt_buf_sz[card_no] > 18000) ) | |
242 | olympic_priv->pkt_buf_sz = PKT_BUF_SZ ; | |
243 | else | |
244 | olympic_priv->pkt_buf_sz = pkt_buf_sz[card_no] ; | |
245 | ||
246 | dev->mtu = olympic_priv->pkt_buf_sz - TR_HLEN ; | |
247 | olympic_priv->olympic_ring_speed = ringspeed[card_no] ; | |
248 | olympic_priv->olympic_message_level = message_level[card_no] ; | |
249 | olympic_priv->olympic_network_monitor = network_monitor[card_no]; | |
250 | ||
251 | if ((i = olympic_init(dev))) { | |
252 | goto op_free_iomap; | |
253 | } | |
254 | ||
255 | dev->open=&olympic_open; | |
256 | dev->hard_start_xmit=&olympic_xmit; | |
257 | dev->change_mtu=&olympic_change_mtu; | |
258 | dev->stop=&olympic_close; | |
259 | dev->do_ioctl=NULL; | |
260 | dev->set_multicast_list=&olympic_set_rx_mode; | |
261 | dev->get_stats=&olympic_get_stats ; | |
262 | dev->set_mac_address=&olympic_set_mac_address ; | |
263 | SET_MODULE_OWNER(dev) ; | |
264 | SET_NETDEV_DEV(dev, &pdev->dev); | |
265 | ||
266 | pci_set_drvdata(pdev,dev) ; | |
267 | register_netdev(dev) ; | |
268 | printk("Olympic: %s registered as: %s\n",olympic_priv->olympic_card_name,dev->name); | |
269 | if (olympic_priv->olympic_network_monitor) { /* Must go after register_netdev as we need the device name */ | |
270 | char proc_name[20] ; | |
271 | strcpy(proc_name,"net/olympic_") ; | |
272 | strcat(proc_name,dev->name) ; | |
273 | create_proc_read_entry(proc_name,0,NULL,olympic_proc_info,(void *)dev) ; | |
274 | printk("Olympic: Network Monitor information: /proc/%s\n",proc_name); | |
275 | } | |
276 | return 0 ; | |
277 | ||
278 | op_free_iomap: | |
279 | if (olympic_priv->olympic_mmio) | |
280 | iounmap(olympic_priv->olympic_mmio); | |
281 | if (olympic_priv->olympic_lap) | |
282 | iounmap(olympic_priv->olympic_lap); | |
283 | ||
284 | op_free_dev: | |
285 | free_netdev(dev); | |
286 | pci_release_regions(pdev); | |
287 | ||
288 | op_disable_dev: | |
289 | pci_disable_device(pdev); | |
290 | return i; | |
291 | } | |
292 | ||
293 | static int __devinit olympic_init(struct net_device *dev) | |
294 | { | |
295 | struct olympic_private *olympic_priv; | |
296 | u8 __iomem *olympic_mmio, *init_srb,*adapter_addr; | |
297 | unsigned long t; | |
298 | unsigned int uaa_addr; | |
299 | ||
300 | olympic_priv=(struct olympic_private *)dev->priv; | |
301 | olympic_mmio=olympic_priv->olympic_mmio; | |
302 | ||
303 | printk("%s \n", version); | |
304 | printk("%s. I/O at %hx, MMIO at %p, LAP at %p, using irq %d\n", olympic_priv->olympic_card_name, (unsigned int) dev->base_addr,olympic_priv->olympic_mmio, olympic_priv->olympic_lap, dev->irq); | |
305 | ||
306 | writel(readl(olympic_mmio+BCTL) | BCTL_SOFTRESET,olympic_mmio+BCTL); | |
307 | t=jiffies; | |
308 | while((readl(olympic_mmio+BCTL)) & BCTL_SOFTRESET) { | |
309 | schedule(); | |
310 | if(jiffies-t > 40*HZ) { | |
311 | printk(KERN_ERR "IBM PCI tokenring card not responding.\n"); | |
312 | return -ENODEV; | |
313 | } | |
314 | } | |
315 | ||
316 | ||
317 | /* Needed for cardbus */ | |
318 | if(!(readl(olympic_mmio+BCTL) & BCTL_MODE_INDICATOR)) { | |
319 | writel(readl(olympic_priv->olympic_mmio+FERMASK)|FERMASK_INT_BIT, olympic_mmio+FERMASK); | |
320 | } | |
321 | ||
322 | #if OLYMPIC_DEBUG | |
323 | printk("BCTL: %x\n",readl(olympic_mmio+BCTL)); | |
324 | printk("GPR: %x\n",readw(olympic_mmio+GPR)); | |
325 | printk("SISRMASK: %x\n",readl(olympic_mmio+SISR_MASK)); | |
326 | #endif | |
327 | /* Aaaahhh, You have got to be real careful setting GPR, the card | |
328 | holds the previous values from flash memory, including autosense | |
329 | and ring speed */ | |
330 | ||
331 | writel(readl(olympic_mmio+BCTL)|BCTL_MIMREB,olympic_mmio+BCTL); | |
332 | ||
333 | if (olympic_priv->olympic_ring_speed == 0) { /* Autosense */ | |
334 | writew(readw(olympic_mmio+GPR)|GPR_AUTOSENSE,olympic_mmio+GPR); | |
335 | if (olympic_priv->olympic_message_level) | |
336 | printk(KERN_INFO "%s: Ringspeed autosense mode on\n",olympic_priv->olympic_card_name); | |
337 | } else if (olympic_priv->olympic_ring_speed == 16) { | |
338 | if (olympic_priv->olympic_message_level) | |
339 | printk(KERN_INFO "%s: Trying to open at 16 Mbps as requested\n", olympic_priv->olympic_card_name); | |
340 | writew(GPR_16MBPS, olympic_mmio+GPR); | |
341 | } else if (olympic_priv->olympic_ring_speed == 4) { | |
342 | if (olympic_priv->olympic_message_level) | |
343 | printk(KERN_INFO "%s: Trying to open at 4 Mbps as requested\n", olympic_priv->olympic_card_name) ; | |
344 | writew(0, olympic_mmio+GPR); | |
345 | } | |
346 | ||
347 | writew(readw(olympic_mmio+GPR)|GPR_NEPTUNE_BF,olympic_mmio+GPR); | |
348 | ||
349 | #if OLYMPIC_DEBUG | |
350 | printk("GPR = %x\n",readw(olympic_mmio + GPR) ) ; | |
351 | #endif | |
352 | /* Solo has been paused to meet the Cardbus power | |
353 | * specs if the adapter is cardbus. Check to | |
354 | * see its been paused and then restart solo. The | |
355 | * adapter should set the pause bit within 1 second. | |
356 | */ | |
357 | ||
358 | if(!(readl(olympic_mmio+BCTL) & BCTL_MODE_INDICATOR)) { | |
359 | t=jiffies; | |
360 | while (!readl(olympic_mmio+CLKCTL) & CLKCTL_PAUSE) { | |
361 | schedule() ; | |
362 | if(jiffies-t > 2*HZ) { | |
363 | printk(KERN_ERR "IBM Cardbus tokenring adapter not responsing.\n") ; | |
364 | return -ENODEV; | |
365 | } | |
366 | } | |
367 | writel(readl(olympic_mmio+CLKCTL) & ~CLKCTL_PAUSE, olympic_mmio+CLKCTL) ; | |
368 | } | |
369 | ||
370 | /* start solo init */ | |
371 | writel((1<<15),olympic_mmio+SISR_MASK_SUM); | |
372 | ||
373 | t=jiffies; | |
374 | while(!((readl(olympic_mmio+SISR_RR)) & SISR_SRB_REPLY)) { | |
375 | schedule(); | |
376 | if(jiffies-t > 15*HZ) { | |
377 | printk(KERN_ERR "IBM PCI tokenring card not responding.\n"); | |
378 | return -ENODEV; | |
379 | } | |
380 | } | |
381 | ||
382 | writel(readw(olympic_mmio+LAPWWO),olympic_mmio+LAPA); | |
383 | ||
384 | #if OLYMPIC_DEBUG | |
385 | printk("LAPWWO: %x, LAPA: %x\n",readl(olympic_mmio+LAPWWO), readl(olympic_mmio+LAPA)); | |
386 | #endif | |
387 | ||
388 | init_srb=olympic_priv->olympic_lap + ((readw(olympic_mmio+LAPWWO)) & (~0xf800)); | |
389 | ||
390 | #if OLYMPIC_DEBUG | |
391 | { | |
392 | int i; | |
393 | printk("init_srb(%p): ",init_srb); | |
394 | for(i=0;i<20;i++) | |
395 | printk("%x ",readb(init_srb+i)); | |
396 | printk("\n"); | |
397 | } | |
398 | #endif | |
399 | if(readw(init_srb+6)) { | |
400 | printk(KERN_INFO "tokenring card initialization failed. errorcode : %x\n",readw(init_srb+6)); | |
401 | return -ENODEV; | |
402 | } | |
403 | ||
404 | if (olympic_priv->olympic_message_level) { | |
405 | if ( readb(init_srb +2) & 0x40) { | |
406 | printk(KERN_INFO "Olympic: Adapter is FDX capable.\n") ; | |
407 | } else { | |
408 | printk(KERN_INFO "Olympic: Adapter cannot do FDX.\n"); | |
409 | } | |
410 | } | |
411 | ||
412 | uaa_addr=swab16(readw(init_srb+8)); | |
413 | ||
414 | #if OLYMPIC_DEBUG | |
415 | printk("UAA resides at %x\n",uaa_addr); | |
416 | #endif | |
417 | ||
418 | writel(uaa_addr,olympic_mmio+LAPA); | |
419 | adapter_addr=olympic_priv->olympic_lap + (uaa_addr & (~0xf800)); | |
420 | ||
421 | #if OLYMPIC_DEBUG | |
422 | printk("adapter address: %02x:%02x:%02x:%02x:%02x:%02x\n", | |
423 | readb(adapter_addr), readb(adapter_addr+1),readb(adapter_addr+2), | |
424 | readb(adapter_addr+3),readb(adapter_addr+4),readb(adapter_addr+5)); | |
425 | #endif | |
426 | ||
427 | memcpy_fromio(&dev->dev_addr[0], adapter_addr,6); | |
428 | ||
429 | olympic_priv->olympic_addr_table_addr = swab16(readw(init_srb + 12)); | |
430 | olympic_priv->olympic_parms_addr = swab16(readw(init_srb + 14)); | |
431 | ||
432 | return 0; | |
433 | ||
434 | } | |
435 | ||
436 | static int olympic_open(struct net_device *dev) | |
437 | { | |
438 | struct olympic_private *olympic_priv=(struct olympic_private *)dev->priv; | |
439 | u8 __iomem *olympic_mmio=olympic_priv->olympic_mmio,*init_srb; | |
440 | unsigned long flags, t; | |
441 | int i, open_finished = 1 ; | |
442 | u8 resp, err; | |
443 | ||
444 | DECLARE_WAITQUEUE(wait,current) ; | |
445 | ||
446 | olympic_init(dev); | |
447 | ||
448 | if(request_irq(dev->irq, &olympic_interrupt, SA_SHIRQ , "olympic", dev)) { | |
449 | return -EAGAIN; | |
450 | } | |
451 | ||
452 | #if OLYMPIC_DEBUG | |
453 | printk("BMCTL: %x\n",readl(olympic_mmio+BMCTL_SUM)); | |
454 | printk("pending ints: %x\n",readl(olympic_mmio+SISR_RR)); | |
455 | #endif | |
456 | ||
457 | writel(SISR_MI,olympic_mmio+SISR_MASK_SUM); | |
458 | ||
459 | writel(SISR_MI | SISR_SRB_REPLY, olympic_mmio+SISR_MASK); /* more ints later, doesn't stop arb cmd interrupt */ | |
460 | ||
461 | writel(LISR_LIE,olympic_mmio+LISR); /* more ints later */ | |
462 | ||
463 | /* adapter is closed, so SRB is pointed to by LAPWWO */ | |
464 | ||
465 | writel(readw(olympic_mmio+LAPWWO),olympic_mmio+LAPA); | |
466 | init_srb=olympic_priv->olympic_lap + ((readw(olympic_mmio+LAPWWO)) & (~0xf800)); | |
467 | ||
468 | #if OLYMPIC_DEBUG | |
469 | printk("LAPWWO: %x, LAPA: %x\n",readw(olympic_mmio+LAPWWO), readl(olympic_mmio+LAPA)); | |
470 | printk("SISR Mask = %04x\n", readl(olympic_mmio+SISR_MASK)); | |
471 | printk("Before the open command \n"); | |
472 | #endif | |
473 | do { | |
474 | memset_io(init_srb,0,SRB_COMMAND_SIZE); | |
475 | ||
476 | writeb(SRB_OPEN_ADAPTER,init_srb) ; /* open */ | |
477 | writeb(OLYMPIC_CLEAR_RET_CODE,init_srb+2); | |
478 | ||
479 | /* If Network Monitor, instruct card to copy MAC frames through the ARB */ | |
480 | if (olympic_priv->olympic_network_monitor) | |
481 | writew(swab16(OPEN_ADAPTER_ENABLE_FDX | OPEN_ADAPTER_PASS_ADC_MAC | OPEN_ADAPTER_PASS_ATT_MAC | OPEN_ADAPTER_PASS_BEACON), init_srb+8); | |
482 | else | |
483 | writew(swab16(OPEN_ADAPTER_ENABLE_FDX), init_srb+8); | |
484 | ||
485 | /* Test OR of first 3 bytes as its totally possible for | |
486 | * someone to set the first 2 bytes to be zero, although this | |
487 | * is an error, the first byte must have bit 6 set to 1 */ | |
488 | ||
489 | if (olympic_priv->olympic_laa[0] | olympic_priv->olympic_laa[1] | olympic_priv->olympic_laa[2]) { | |
490 | writeb(olympic_priv->olympic_laa[0],init_srb+12); | |
491 | writeb(olympic_priv->olympic_laa[1],init_srb+13); | |
492 | writeb(olympic_priv->olympic_laa[2],init_srb+14); | |
493 | writeb(olympic_priv->olympic_laa[3],init_srb+15); | |
494 | writeb(olympic_priv->olympic_laa[4],init_srb+16); | |
495 | writeb(olympic_priv->olympic_laa[5],init_srb+17); | |
496 | memcpy(dev->dev_addr,olympic_priv->olympic_laa,dev->addr_len) ; | |
497 | } | |
498 | writeb(1,init_srb+30); | |
499 | ||
500 | spin_lock_irqsave(&olympic_priv->olympic_lock,flags); | |
501 | olympic_priv->srb_queued=1; | |
502 | ||
503 | writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM); | |
504 | spin_unlock_irqrestore(&olympic_priv->olympic_lock,flags); | |
505 | ||
506 | t = jiffies ; | |
507 | ||
508 | add_wait_queue(&olympic_priv->srb_wait,&wait) ; | |
509 | set_current_state(TASK_INTERRUPTIBLE) ; | |
510 | ||
511 | while(olympic_priv->srb_queued) { | |
512 | schedule() ; | |
513 | if(signal_pending(current)) { | |
514 | printk(KERN_WARNING "%s: Signal received in open.\n", | |
515 | dev->name); | |
516 | printk(KERN_WARNING "SISR=%x LISR=%x\n", | |
517 | readl(olympic_mmio+SISR), | |
518 | readl(olympic_mmio+LISR)); | |
519 | olympic_priv->srb_queued=0; | |
520 | break; | |
521 | } | |
522 | if ((jiffies-t) > 10*HZ) { | |
523 | printk(KERN_WARNING "%s: SRB timed out. \n",dev->name) ; | |
524 | olympic_priv->srb_queued=0; | |
525 | break ; | |
526 | } | |
527 | set_current_state(TASK_INTERRUPTIBLE) ; | |
528 | } | |
529 | remove_wait_queue(&olympic_priv->srb_wait,&wait) ; | |
530 | set_current_state(TASK_RUNNING) ; | |
531 | olympic_priv->srb_queued = 0 ; | |
532 | #if OLYMPIC_DEBUG | |
533 | printk("init_srb(%p): ",init_srb); | |
534 | for(i=0;i<20;i++) | |
535 | printk("%02x ",readb(init_srb+i)); | |
536 | printk("\n"); | |
537 | #endif | |
538 | ||
539 | /* If we get the same return response as we set, the interrupt wasn't raised and the open | |
540 | * timed out. | |
541 | */ | |
542 | ||
543 | switch (resp = readb(init_srb+2)) { | |
544 | case OLYMPIC_CLEAR_RET_CODE: | |
545 | printk(KERN_WARNING "%s: Adapter Open time out or error.\n", dev->name) ; | |
546 | goto out; | |
547 | case 0: | |
548 | open_finished = 1; | |
549 | break; | |
550 | case 0x07: | |
551 | if (!olympic_priv->olympic_ring_speed && open_finished) { /* Autosense , first time around */ | |
552 | printk(KERN_WARNING "%s: Retrying at different ring speed \n", dev->name); | |
553 | open_finished = 0 ; | |
554 | continue; | |
555 | } | |
556 | ||
557 | err = readb(init_srb+7); | |
558 | ||
559 | if (!olympic_priv->olympic_ring_speed && ((err & 0x0f) == 0x0d)) { | |
560 | printk(KERN_WARNING "%s: Tried to autosense ring speed with no monitors present\n",dev->name); | |
561 | printk(KERN_WARNING "%s: Please try again with a specified ring speed \n",dev->name); | |
562 | } else { | |
563 | printk(KERN_WARNING "%s: %s - %s\n", dev->name, | |
564 | open_maj_error[(err & 0xf0) >> 4], | |
565 | open_min_error[(err & 0x0f)]); | |
566 | } | |
567 | goto out; | |
568 | ||
569 | case 0x32: | |
570 | printk(KERN_WARNING "%s: Invalid LAA: %02x:%02x:%02x:%02x:%02x:%02x\n", | |
571 | dev->name, | |
572 | olympic_priv->olympic_laa[0], | |
573 | olympic_priv->olympic_laa[1], | |
574 | olympic_priv->olympic_laa[2], | |
575 | olympic_priv->olympic_laa[3], | |
576 | olympic_priv->olympic_laa[4], | |
577 | olympic_priv->olympic_laa[5]) ; | |
578 | goto out; | |
579 | ||
580 | default: | |
581 | printk(KERN_WARNING "%s: Bad OPEN response: %x\n", dev->name, resp); | |
582 | goto out; | |
583 | ||
584 | } | |
585 | } while (!(open_finished)) ; /* Will only loop if ring speed mismatch re-open attempted && autosense is on */ | |
586 | ||
587 | if (readb(init_srb+18) & (1<<3)) | |
588 | if (olympic_priv->olympic_message_level) | |
589 | printk(KERN_INFO "%s: Opened in FDX Mode\n",dev->name); | |
590 | ||
591 | if (readb(init_srb+18) & (1<<1)) | |
592 | olympic_priv->olympic_ring_speed = 100 ; | |
593 | else if (readb(init_srb+18) & 1) | |
594 | olympic_priv->olympic_ring_speed = 16 ; | |
595 | else | |
596 | olympic_priv->olympic_ring_speed = 4 ; | |
597 | ||
598 | if (olympic_priv->olympic_message_level) | |
599 | printk(KERN_INFO "%s: Opened in %d Mbps mode\n",dev->name, olympic_priv->olympic_ring_speed); | |
600 | ||
601 | olympic_priv->asb = swab16(readw(init_srb+8)); | |
602 | olympic_priv->srb = swab16(readw(init_srb+10)); | |
603 | olympic_priv->arb = swab16(readw(init_srb+12)); | |
604 | olympic_priv->trb = swab16(readw(init_srb+16)); | |
605 | ||
606 | olympic_priv->olympic_receive_options = 0x01 ; | |
607 | olympic_priv->olympic_copy_all_options = 0 ; | |
608 | ||
609 | /* setup rx ring */ | |
610 | ||
611 | writel((3<<16),olympic_mmio+BMCTL_RWM); /* Ensure end of frame generated interrupts */ | |
612 | ||
613 | writel(BMCTL_RX_DIS|3,olympic_mmio+BMCTL_RWM); /* Yes, this the enables RX channel */ | |
614 | ||
615 | for(i=0;i<OLYMPIC_RX_RING_SIZE;i++) { | |
616 | ||
617 | struct sk_buff *skb; | |
618 | ||
619 | skb=dev_alloc_skb(olympic_priv->pkt_buf_sz); | |
620 | if(skb == NULL) | |
621 | break; | |
622 | ||
623 | skb->dev = dev; | |
624 | ||
625 | olympic_priv->olympic_rx_ring[i].buffer = cpu_to_le32(pci_map_single(olympic_priv->pdev, | |
626 | skb->data,olympic_priv->pkt_buf_sz, PCI_DMA_FROMDEVICE)) ; | |
627 | olympic_priv->olympic_rx_ring[i].res_length = cpu_to_le32(olympic_priv->pkt_buf_sz); | |
628 | olympic_priv->rx_ring_skb[i]=skb; | |
629 | } | |
630 | ||
631 | if (i==0) { | |
632 | printk(KERN_WARNING "%s: Not enough memory to allocate rx buffers. Adapter disabled\n",dev->name); | |
633 | goto out; | |
634 | } | |
635 | ||
636 | olympic_priv->rx_ring_dma_addr = pci_map_single(olympic_priv->pdev,olympic_priv->olympic_rx_ring, | |
637 | sizeof(struct olympic_rx_desc) * OLYMPIC_RX_RING_SIZE, PCI_DMA_TODEVICE); | |
638 | writel(olympic_priv->rx_ring_dma_addr, olympic_mmio+RXDESCQ); | |
639 | writel(olympic_priv->rx_ring_dma_addr, olympic_mmio+RXCDA); | |
640 | writew(i, olympic_mmio+RXDESCQCNT); | |
641 | ||
642 | olympic_priv->rx_status_ring_dma_addr = pci_map_single(olympic_priv->pdev, olympic_priv->olympic_rx_status_ring, | |
643 | sizeof(struct olympic_rx_status) * OLYMPIC_RX_RING_SIZE, PCI_DMA_FROMDEVICE); | |
644 | writel(olympic_priv->rx_status_ring_dma_addr, olympic_mmio+RXSTATQ); | |
645 | writel(olympic_priv->rx_status_ring_dma_addr, olympic_mmio+RXCSA); | |
646 | ||
647 | olympic_priv->rx_ring_last_received = OLYMPIC_RX_RING_SIZE - 1; /* last processed rx status */ | |
648 | olympic_priv->rx_status_last_received = OLYMPIC_RX_RING_SIZE - 1; | |
649 | ||
650 | writew(i, olympic_mmio+RXSTATQCNT); | |
651 | ||
652 | #if OLYMPIC_DEBUG | |
653 | printk("# of rx buffers: %d, RXENQ: %x\n",i, readw(olympic_mmio+RXENQ)); | |
654 | printk("RXCSA: %x, rx_status_ring[0]: %p\n",readl(olympic_mmio+RXCSA),&olympic_priv->olympic_rx_status_ring[0]); | |
655 | printk(" stat_ring[1]: %p, stat_ring[2]: %p, stat_ring[3]: %p\n", &(olympic_priv->olympic_rx_status_ring[1]), &(olympic_priv->olympic_rx_status_ring[2]), &(olympic_priv->olympic_rx_status_ring[3]) ); | |
656 | printk(" stat_ring[4]: %p, stat_ring[5]: %p, stat_ring[6]: %p\n", &(olympic_priv->olympic_rx_status_ring[4]), &(olympic_priv->olympic_rx_status_ring[5]), &(olympic_priv->olympic_rx_status_ring[6]) ); | |
657 | printk(" stat_ring[7]: %p\n", &(olympic_priv->olympic_rx_status_ring[7]) ); | |
658 | ||
659 | printk("RXCDA: %x, rx_ring[0]: %p\n",readl(olympic_mmio+RXCDA),&olympic_priv->olympic_rx_ring[0]); | |
660 | printk("Rx_ring_dma_addr = %08x, rx_status_dma_addr = %08x\n", | |
661 | olympic_priv->rx_ring_dma_addr,olympic_priv->rx_status_ring_dma_addr) ; | |
662 | #endif | |
663 | ||
664 | writew((((readw(olympic_mmio+RXENQ)) & 0x8000) ^ 0x8000) | i,olympic_mmio+RXENQ); | |
665 | ||
666 | #if OLYMPIC_DEBUG | |
667 | printk("# of rx buffers: %d, RXENQ: %x\n",i, readw(olympic_mmio+RXENQ)); | |
668 | printk("RXCSA: %x, rx_ring[0]: %p\n",readl(olympic_mmio+RXCSA),&olympic_priv->olympic_rx_status_ring[0]); | |
669 | printk("RXCDA: %x, rx_ring[0]: %p\n",readl(olympic_mmio+RXCDA),&olympic_priv->olympic_rx_ring[0]); | |
670 | #endif | |
671 | ||
672 | writel(SISR_RX_STATUS | SISR_RX_NOBUF,olympic_mmio+SISR_MASK_SUM); | |
673 | ||
674 | /* setup tx ring */ | |
675 | ||
676 | writel(BMCTL_TX1_DIS,olympic_mmio+BMCTL_RWM); /* Yes, this enables TX channel 1 */ | |
677 | for(i=0;i<OLYMPIC_TX_RING_SIZE;i++) | |
678 | olympic_priv->olympic_tx_ring[i].buffer=0xdeadbeef; | |
679 | ||
680 | olympic_priv->free_tx_ring_entries=OLYMPIC_TX_RING_SIZE; | |
681 | olympic_priv->tx_ring_dma_addr = pci_map_single(olympic_priv->pdev,olympic_priv->olympic_tx_ring, | |
682 | sizeof(struct olympic_tx_desc) * OLYMPIC_TX_RING_SIZE,PCI_DMA_TODEVICE) ; | |
683 | writel(olympic_priv->tx_ring_dma_addr, olympic_mmio+TXDESCQ_1); | |
684 | writel(olympic_priv->tx_ring_dma_addr, olympic_mmio+TXCDA_1); | |
685 | writew(OLYMPIC_TX_RING_SIZE, olympic_mmio+TXDESCQCNT_1); | |
686 | ||
687 | olympic_priv->tx_status_ring_dma_addr = pci_map_single(olympic_priv->pdev, olympic_priv->olympic_tx_status_ring, | |
688 | sizeof(struct olympic_tx_status) * OLYMPIC_TX_RING_SIZE, PCI_DMA_FROMDEVICE); | |
689 | writel(olympic_priv->tx_status_ring_dma_addr,olympic_mmio+TXSTATQ_1); | |
690 | writel(olympic_priv->tx_status_ring_dma_addr,olympic_mmio+TXCSA_1); | |
691 | writew(OLYMPIC_TX_RING_SIZE,olympic_mmio+TXSTATQCNT_1); | |
692 | ||
693 | olympic_priv->tx_ring_free=0; /* next entry in tx ring to use */ | |
694 | olympic_priv->tx_ring_last_status=OLYMPIC_TX_RING_SIZE-1; /* last processed tx status */ | |
695 | ||
696 | writel(0xffffffff, olympic_mmio+EISR_RWM) ; /* clean the eisr */ | |
697 | writel(0,olympic_mmio+EISR) ; | |
698 | writel(EISR_MASK_OPTIONS,olympic_mmio+EISR_MASK) ; /* enables most of the TX error interrupts */ | |
699 | writel(SISR_TX1_EOF | SISR_ADAPTER_CHECK | SISR_ARB_CMD | SISR_TRB_REPLY | SISR_ASB_FREE | SISR_ERR,olympic_mmio+SISR_MASK_SUM); | |
700 | ||
701 | #if OLYMPIC_DEBUG | |
702 | printk("BMCTL: %x\n",readl(olympic_mmio+BMCTL_SUM)); | |
703 | printk("SISR MASK: %x\n",readl(olympic_mmio+SISR_MASK)); | |
704 | #endif | |
705 | ||
706 | if (olympic_priv->olympic_network_monitor) { | |
707 | u8 __iomem *oat ; | |
708 | u8 __iomem *opt ; | |
709 | oat = (olympic_priv->olympic_lap + olympic_priv->olympic_addr_table_addr) ; | |
710 | opt = (olympic_priv->olympic_lap + olympic_priv->olympic_parms_addr) ; | |
711 | ||
712 | printk("%s: Node Address: %02x:%02x:%02x:%02x:%02x:%02x\n",dev->name, | |
713 | readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)), | |
714 | readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+1), | |
715 | readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+2), | |
716 | readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+3), | |
717 | readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+4), | |
718 | readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+5)); | |
719 | printk("%s: Functional Address: %02x:%02x:%02x:%02x\n",dev->name, | |
720 | readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)), | |
721 | readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+1), | |
722 | readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+2), | |
723 | readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+3)); | |
724 | printk("%s: NAUN Address: %02x:%02x:%02x:%02x:%02x:%02x\n",dev->name, | |
725 | readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)), | |
726 | readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+1), | |
727 | readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+2), | |
728 | readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+3), | |
729 | readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+4), | |
730 | readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+5)); | |
731 | } | |
732 | ||
733 | netif_start_queue(dev); | |
734 | return 0; | |
735 | ||
736 | out: | |
737 | free_irq(dev->irq, dev); | |
738 | return -EIO; | |
739 | } | |
740 | ||
741 | /* | |
742 | * When we enter the rx routine we do not know how many frames have been | |
743 | * queued on the rx channel. Therefore we start at the next rx status | |
744 | * position and travel around the receive ring until we have completed | |
745 | * all the frames. | |
746 | * | |
747 | * This means that we may process the frame before we receive the end | |
748 | * of frame interrupt. This is why we always test the status instead | |
749 | * of blindly processing the next frame. | |
750 | * | |
751 | * We also remove the last 4 bytes from the packet as well, these are | |
752 | * just token ring trailer info and upset protocols that don't check | |
753 | * their own length, i.e. SNA. | |
754 | * | |
755 | */ | |
756 | static void olympic_rx(struct net_device *dev) | |
757 | { | |
758 | struct olympic_private *olympic_priv=(struct olympic_private *)dev->priv; | |
759 | u8 __iomem *olympic_mmio=olympic_priv->olympic_mmio; | |
760 | struct olympic_rx_status *rx_status; | |
761 | struct olympic_rx_desc *rx_desc ; | |
762 | int rx_ring_last_received,length, buffer_cnt, cpy_length, frag_len; | |
763 | struct sk_buff *skb, *skb2; | |
764 | int i; | |
765 | ||
766 | rx_status=&(olympic_priv->olympic_rx_status_ring[(olympic_priv->rx_status_last_received + 1) & (OLYMPIC_RX_RING_SIZE - 1)]) ; | |
767 | ||
768 | while (rx_status->status_buffercnt) { | |
769 | u32 l_status_buffercnt; | |
770 | ||
771 | olympic_priv->rx_status_last_received++ ; | |
772 | olympic_priv->rx_status_last_received &= (OLYMPIC_RX_RING_SIZE -1); | |
773 | #if OLYMPIC_DEBUG | |
774 | printk("rx status: %x rx len: %x \n", le32_to_cpu(rx_status->status_buffercnt), le32_to_cpu(rx_status->fragmentcnt_framelen)); | |
775 | #endif | |
776 | length = le32_to_cpu(rx_status->fragmentcnt_framelen) & 0xffff; | |
777 | buffer_cnt = le32_to_cpu(rx_status->status_buffercnt) & 0xffff; | |
778 | i = buffer_cnt ; /* Need buffer_cnt later for rxenq update */ | |
779 | frag_len = le32_to_cpu(rx_status->fragmentcnt_framelen) >> 16; | |
780 | ||
781 | #if OLYMPIC_DEBUG | |
782 | printk("length: %x, frag_len: %x, buffer_cnt: %x\n", length, frag_len, buffer_cnt); | |
783 | #endif | |
784 | l_status_buffercnt = le32_to_cpu(rx_status->status_buffercnt); | |
785 | if(l_status_buffercnt & 0xC0000000) { | |
786 | if (l_status_buffercnt & 0x3B000000) { | |
787 | if (olympic_priv->olympic_message_level) { | |
788 | if (l_status_buffercnt & (1<<29)) /* Rx Frame Truncated */ | |
789 | printk(KERN_WARNING "%s: Rx Frame Truncated \n",dev->name); | |
790 | if (l_status_buffercnt & (1<<28)) /*Rx receive overrun */ | |
791 | printk(KERN_WARNING "%s: Rx Frame Receive overrun \n",dev->name); | |
792 | if (l_status_buffercnt & (1<<27)) /* No receive buffers */ | |
793 | printk(KERN_WARNING "%s: No receive buffers \n",dev->name); | |
794 | if (l_status_buffercnt & (1<<25)) /* Receive frame error detect */ | |
795 | printk(KERN_WARNING "%s: Receive frame error detect \n",dev->name); | |
796 | if (l_status_buffercnt & (1<<24)) /* Received Error Detect */ | |
797 | printk(KERN_WARNING "%s: Received Error Detect \n",dev->name); | |
798 | } | |
799 | olympic_priv->rx_ring_last_received += i ; | |
800 | olympic_priv->rx_ring_last_received &= (OLYMPIC_RX_RING_SIZE -1) ; | |
801 | olympic_priv->olympic_stats.rx_errors++; | |
802 | } else { | |
803 | ||
804 | if (buffer_cnt == 1) { | |
805 | skb = dev_alloc_skb(max_t(int, olympic_priv->pkt_buf_sz,length)) ; | |
806 | } else { | |
807 | skb = dev_alloc_skb(length) ; | |
808 | } | |
809 | ||
810 | if (skb == NULL) { | |
811 | printk(KERN_WARNING "%s: Not enough memory to copy packet to upper layers. \n",dev->name) ; | |
812 | olympic_priv->olympic_stats.rx_dropped++ ; | |
813 | /* Update counters even though we don't transfer the frame */ | |
814 | olympic_priv->rx_ring_last_received += i ; | |
815 | olympic_priv->rx_ring_last_received &= (OLYMPIC_RX_RING_SIZE -1) ; | |
816 | } else { | |
817 | skb->dev = dev ; | |
818 | ||
819 | /* Optimise based upon number of buffers used. | |
820 | If only one buffer is used we can simply swap the buffers around. | |
821 | If more than one then we must use the new buffer and copy the information | |
822 | first. Ideally all frames would be in a single buffer, this can be tuned by | |
823 | altering the buffer size. If the length of the packet is less than | |
824 | 1500 bytes we're going to copy it over anyway to stop packets getting | |
825 | dropped from sockets with buffers smaller than our pkt_buf_sz. */ | |
826 | ||
827 | if (buffer_cnt==1) { | |
828 | olympic_priv->rx_ring_last_received++ ; | |
829 | olympic_priv->rx_ring_last_received &= (OLYMPIC_RX_RING_SIZE -1); | |
830 | rx_ring_last_received = olympic_priv->rx_ring_last_received ; | |
831 | if (length > 1500) { | |
832 | skb2=olympic_priv->rx_ring_skb[rx_ring_last_received] ; | |
833 | /* unmap buffer */ | |
834 | pci_unmap_single(olympic_priv->pdev, | |
835 | le32_to_cpu(olympic_priv->olympic_rx_ring[rx_ring_last_received].buffer), | |
836 | olympic_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ; | |
837 | skb_put(skb2,length-4); | |
838 | skb2->protocol = tr_type_trans(skb2,dev); | |
839 | olympic_priv->olympic_rx_ring[rx_ring_last_received].buffer = | |
840 | cpu_to_le32(pci_map_single(olympic_priv->pdev, skb->data, | |
841 | olympic_priv->pkt_buf_sz, PCI_DMA_FROMDEVICE)); | |
842 | olympic_priv->olympic_rx_ring[rx_ring_last_received].res_length = | |
843 | cpu_to_le32(olympic_priv->pkt_buf_sz); | |
844 | olympic_priv->rx_ring_skb[rx_ring_last_received] = skb ; | |
845 | netif_rx(skb2) ; | |
846 | } else { | |
847 | pci_dma_sync_single_for_cpu(olympic_priv->pdev, | |
848 | le32_to_cpu(olympic_priv->olympic_rx_ring[rx_ring_last_received].buffer), | |
849 | olympic_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ; | |
850 | memcpy(skb_put(skb,length-4),olympic_priv->rx_ring_skb[rx_ring_last_received]->data,length-4) ; | |
851 | pci_dma_sync_single_for_device(olympic_priv->pdev, | |
852 | le32_to_cpu(olympic_priv->olympic_rx_ring[rx_ring_last_received].buffer), | |
853 | olympic_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ; | |
854 | skb->protocol = tr_type_trans(skb,dev) ; | |
855 | netif_rx(skb) ; | |
856 | } | |
857 | } else { | |
858 | do { /* Walk the buffers */ | |
859 | olympic_priv->rx_ring_last_received++ ; | |
860 | olympic_priv->rx_ring_last_received &= (OLYMPIC_RX_RING_SIZE -1); | |
861 | rx_ring_last_received = olympic_priv->rx_ring_last_received ; | |
862 | pci_dma_sync_single_for_cpu(olympic_priv->pdev, | |
863 | le32_to_cpu(olympic_priv->olympic_rx_ring[rx_ring_last_received].buffer), | |
864 | olympic_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ; | |
865 | rx_desc = &(olympic_priv->olympic_rx_ring[rx_ring_last_received]); | |
866 | cpy_length = (i == 1 ? frag_len : le32_to_cpu(rx_desc->res_length)); | |
867 | memcpy(skb_put(skb, cpy_length), olympic_priv->rx_ring_skb[rx_ring_last_received]->data, cpy_length) ; | |
868 | pci_dma_sync_single_for_device(olympic_priv->pdev, | |
869 | le32_to_cpu(olympic_priv->olympic_rx_ring[rx_ring_last_received].buffer), | |
870 | olympic_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ; | |
871 | } while (--i) ; | |
872 | skb_trim(skb,skb->len-4) ; | |
873 | skb->protocol = tr_type_trans(skb,dev); | |
874 | netif_rx(skb) ; | |
875 | } | |
876 | dev->last_rx = jiffies ; | |
877 | olympic_priv->olympic_stats.rx_packets++ ; | |
878 | olympic_priv->olympic_stats.rx_bytes += length ; | |
879 | } /* if skb == null */ | |
880 | } /* If status & 0x3b */ | |
881 | ||
882 | } else { /*if buffercnt & 0xC */ | |
883 | olympic_priv->rx_ring_last_received += i ; | |
884 | olympic_priv->rx_ring_last_received &= (OLYMPIC_RX_RING_SIZE - 1) ; | |
885 | } | |
886 | ||
887 | rx_status->fragmentcnt_framelen = 0 ; | |
888 | rx_status->status_buffercnt = 0 ; | |
889 | rx_status = &(olympic_priv->olympic_rx_status_ring[(olympic_priv->rx_status_last_received+1) & (OLYMPIC_RX_RING_SIZE -1) ]); | |
890 | ||
891 | writew((((readw(olympic_mmio+RXENQ)) & 0x8000) ^ 0x8000) | buffer_cnt , olympic_mmio+RXENQ); | |
892 | } /* while */ | |
893 | ||
894 | } | |
895 | ||
896 | static void olympic_freemem(struct net_device *dev) | |
897 | { | |
898 | struct olympic_private *olympic_priv=(struct olympic_private *)dev->priv; | |
899 | int i; | |
900 | ||
901 | for(i=0;i<OLYMPIC_RX_RING_SIZE;i++) { | |
902 | if (olympic_priv->rx_ring_skb[olympic_priv->rx_status_last_received] != NULL) { | |
903 | dev_kfree_skb_irq(olympic_priv->rx_ring_skb[olympic_priv->rx_status_last_received]); | |
904 | olympic_priv->rx_ring_skb[olympic_priv->rx_status_last_received] = NULL; | |
905 | } | |
906 | if (olympic_priv->olympic_rx_ring[olympic_priv->rx_status_last_received].buffer != 0xdeadbeef) { | |
907 | pci_unmap_single(olympic_priv->pdev, | |
908 | le32_to_cpu(olympic_priv->olympic_rx_ring[olympic_priv->rx_status_last_received].buffer), | |
909 | olympic_priv->pkt_buf_sz, PCI_DMA_FROMDEVICE); | |
910 | } | |
911 | olympic_priv->rx_status_last_received++; | |
912 | olympic_priv->rx_status_last_received&=OLYMPIC_RX_RING_SIZE-1; | |
913 | } | |
914 | /* unmap rings */ | |
915 | pci_unmap_single(olympic_priv->pdev, olympic_priv->rx_status_ring_dma_addr, | |
916 | sizeof(struct olympic_rx_status) * OLYMPIC_RX_RING_SIZE, PCI_DMA_FROMDEVICE); | |
917 | pci_unmap_single(olympic_priv->pdev, olympic_priv->rx_ring_dma_addr, | |
918 | sizeof(struct olympic_rx_desc) * OLYMPIC_RX_RING_SIZE, PCI_DMA_TODEVICE); | |
919 | ||
920 | pci_unmap_single(olympic_priv->pdev, olympic_priv->tx_status_ring_dma_addr, | |
921 | sizeof(struct olympic_tx_status) * OLYMPIC_TX_RING_SIZE, PCI_DMA_FROMDEVICE); | |
922 | pci_unmap_single(olympic_priv->pdev, olympic_priv->tx_ring_dma_addr, | |
923 | sizeof(struct olympic_tx_desc) * OLYMPIC_TX_RING_SIZE, PCI_DMA_TODEVICE); | |
924 | ||
925 | return ; | |
926 | } | |
927 | ||
928 | static irqreturn_t olympic_interrupt(int irq, void *dev_id, struct pt_regs *regs) | |
929 | { | |
930 | struct net_device *dev= (struct net_device *)dev_id; | |
931 | struct olympic_private *olympic_priv=(struct olympic_private *)dev->priv; | |
932 | u8 __iomem *olympic_mmio=olympic_priv->olympic_mmio; | |
933 | u32 sisr; | |
934 | u8 __iomem *adapter_check_area ; | |
935 | ||
936 | /* | |
937 | * Read sisr but don't reset it yet. | |
938 | * The indication bit may have been set but the interrupt latch | |
939 | * bit may not be set, so we'd lose the interrupt later. | |
940 | */ | |
941 | sisr=readl(olympic_mmio+SISR) ; | |
942 | if (!(sisr & SISR_MI)) /* Interrupt isn't for us */ | |
943 | return IRQ_NONE; | |
944 | sisr=readl(olympic_mmio+SISR_RR) ; /* Read & Reset sisr */ | |
945 | ||
946 | spin_lock(&olympic_priv->olympic_lock); | |
947 | ||
948 | /* Hotswap gives us this on removal */ | |
949 | if (sisr == 0xffffffff) { | |
950 | printk(KERN_WARNING "%s: Hotswap adapter removal.\n",dev->name) ; | |
951 | spin_unlock(&olympic_priv->olympic_lock) ; | |
952 | return IRQ_NONE; | |
953 | } | |
954 | ||
955 | if (sisr & (SISR_SRB_REPLY | SISR_TX1_EOF | SISR_RX_STATUS | SISR_ADAPTER_CHECK | | |
956 | SISR_ASB_FREE | SISR_ARB_CMD | SISR_TRB_REPLY | SISR_RX_NOBUF | SISR_ERR)) { | |
957 | ||
958 | /* If we ever get this the adapter is seriously dead. Only a reset is going to | |
959 | * bring it back to life. We're talking pci bus errors and such like :( */ | |
960 | if((sisr & SISR_ERR) && (readl(olympic_mmio+EISR) & EISR_MASK_OPTIONS)) { | |
961 | printk(KERN_ERR "Olympic: EISR Error, EISR=%08x\n",readl(olympic_mmio+EISR)) ; | |
962 | printk(KERN_ERR "The adapter must be reset to clear this condition.\n") ; | |
963 | printk(KERN_ERR "Please report this error to the driver maintainer and/\n") ; | |
964 | printk(KERN_ERR "or the linux-tr mailing list.\n") ; | |
965 | wake_up_interruptible(&olympic_priv->srb_wait); | |
966 | spin_unlock(&olympic_priv->olympic_lock) ; | |
967 | return IRQ_HANDLED; | |
968 | } /* SISR_ERR */ | |
969 | ||
970 | if(sisr & SISR_SRB_REPLY) { | |
971 | if(olympic_priv->srb_queued==1) { | |
972 | wake_up_interruptible(&olympic_priv->srb_wait); | |
973 | } else if (olympic_priv->srb_queued==2) { | |
974 | olympic_srb_bh(dev) ; | |
975 | } | |
976 | olympic_priv->srb_queued=0; | |
977 | } /* SISR_SRB_REPLY */ | |
978 | ||
979 | /* We shouldn't ever miss the Tx interrupt, but the you never know, hence the loop to ensure | |
980 | we get all tx completions. */ | |
981 | if (sisr & SISR_TX1_EOF) { | |
982 | while(olympic_priv->olympic_tx_status_ring[(olympic_priv->tx_ring_last_status + 1) & (OLYMPIC_TX_RING_SIZE-1)].status) { | |
983 | olympic_priv->tx_ring_last_status++; | |
984 | olympic_priv->tx_ring_last_status &= (OLYMPIC_TX_RING_SIZE-1); | |
985 | olympic_priv->free_tx_ring_entries++; | |
986 | olympic_priv->olympic_stats.tx_bytes += olympic_priv->tx_ring_skb[olympic_priv->tx_ring_last_status]->len; | |
987 | olympic_priv->olympic_stats.tx_packets++ ; | |
988 | pci_unmap_single(olympic_priv->pdev, | |
989 | le32_to_cpu(olympic_priv->olympic_tx_ring[olympic_priv->tx_ring_last_status].buffer), | |
990 | olympic_priv->tx_ring_skb[olympic_priv->tx_ring_last_status]->len,PCI_DMA_TODEVICE); | |
991 | dev_kfree_skb_irq(olympic_priv->tx_ring_skb[olympic_priv->tx_ring_last_status]); | |
992 | olympic_priv->olympic_tx_ring[olympic_priv->tx_ring_last_status].buffer=0xdeadbeef; | |
993 | olympic_priv->olympic_tx_status_ring[olympic_priv->tx_ring_last_status].status=0; | |
994 | } | |
995 | netif_wake_queue(dev); | |
996 | } /* SISR_TX1_EOF */ | |
997 | ||
998 | if (sisr & SISR_RX_STATUS) { | |
999 | olympic_rx(dev); | |
1000 | } /* SISR_RX_STATUS */ | |
1001 | ||
1002 | if (sisr & SISR_ADAPTER_CHECK) { | |
1003 | netif_stop_queue(dev); | |
1004 | printk(KERN_WARNING "%s: Adapter Check Interrupt Raised, 8 bytes of information follow:\n", dev->name); | |
1005 | writel(readl(olympic_mmio+LAPWWC),olympic_mmio+LAPA); | |
1006 | adapter_check_area = olympic_priv->olympic_lap + ((readl(olympic_mmio+LAPWWC)) & (~0xf800)) ; | |
1007 | printk(KERN_WARNING "%s: Bytes %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",dev->name, readb(adapter_check_area+0), readb(adapter_check_area+1), readb(adapter_check_area+2), readb(adapter_check_area+3), readb(adapter_check_area+4), readb(adapter_check_area+5), readb(adapter_check_area+6), readb(adapter_check_area+7)) ; | |
1008 | spin_unlock(&olympic_priv->olympic_lock) ; | |
1009 | return IRQ_HANDLED; | |
1010 | } /* SISR_ADAPTER_CHECK */ | |
1011 | ||
1012 | if (sisr & SISR_ASB_FREE) { | |
1013 | /* Wake up anything that is waiting for the asb response */ | |
1014 | if (olympic_priv->asb_queued) { | |
1015 | olympic_asb_bh(dev) ; | |
1016 | } | |
1017 | } /* SISR_ASB_FREE */ | |
1018 | ||
1019 | if (sisr & SISR_ARB_CMD) { | |
1020 | olympic_arb_cmd(dev) ; | |
1021 | } /* SISR_ARB_CMD */ | |
1022 | ||
1023 | if (sisr & SISR_TRB_REPLY) { | |
1024 | /* Wake up anything that is waiting for the trb response */ | |
1025 | if (olympic_priv->trb_queued) { | |
1026 | wake_up_interruptible(&olympic_priv->trb_wait); | |
1027 | } | |
1028 | olympic_priv->trb_queued = 0 ; | |
1029 | } /* SISR_TRB_REPLY */ | |
1030 | ||
1031 | if (sisr & SISR_RX_NOBUF) { | |
1032 | /* According to the documentation, we don't have to do anything, but trapping it keeps it out of | |
1033 | /var/log/messages. */ | |
1034 | } /* SISR_RX_NOBUF */ | |
1035 | } else { | |
1036 | printk(KERN_WARNING "%s: Unexpected interrupt: %x\n",dev->name, sisr); | |
1037 | printk(KERN_WARNING "%s: SISR_MASK: %x\n",dev->name, readl(olympic_mmio+SISR_MASK)) ; | |
1038 | } /* One if the interrupts we want */ | |
1039 | writel(SISR_MI,olympic_mmio+SISR_MASK_SUM); | |
1040 | ||
1041 | spin_unlock(&olympic_priv->olympic_lock) ; | |
1042 | return IRQ_HANDLED; | |
1043 | } | |
1044 | ||
1045 | static int olympic_xmit(struct sk_buff *skb, struct net_device *dev) | |
1046 | { | |
1047 | struct olympic_private *olympic_priv=(struct olympic_private *)dev->priv; | |
1048 | u8 __iomem *olympic_mmio=olympic_priv->olympic_mmio; | |
1049 | unsigned long flags ; | |
1050 | ||
1051 | spin_lock_irqsave(&olympic_priv->olympic_lock, flags); | |
1052 | ||
1053 | netif_stop_queue(dev); | |
1054 | ||
1055 | if(olympic_priv->free_tx_ring_entries) { | |
1056 | olympic_priv->olympic_tx_ring[olympic_priv->tx_ring_free].buffer = | |
1057 | cpu_to_le32(pci_map_single(olympic_priv->pdev, skb->data, skb->len,PCI_DMA_TODEVICE)); | |
1058 | olympic_priv->olympic_tx_ring[olympic_priv->tx_ring_free].status_length = cpu_to_le32(skb->len | (0x80000000)); | |
1059 | olympic_priv->tx_ring_skb[olympic_priv->tx_ring_free]=skb; | |
1060 | olympic_priv->free_tx_ring_entries--; | |
1061 | ||
1062 | olympic_priv->tx_ring_free++; | |
1063 | olympic_priv->tx_ring_free &= (OLYMPIC_TX_RING_SIZE-1); | |
1064 | writew((((readw(olympic_mmio+TXENQ_1)) & 0x8000) ^ 0x8000) | 1,olympic_mmio+TXENQ_1); | |
1065 | netif_wake_queue(dev); | |
1066 | spin_unlock_irqrestore(&olympic_priv->olympic_lock,flags); | |
1067 | return 0; | |
1068 | } else { | |
1069 | spin_unlock_irqrestore(&olympic_priv->olympic_lock,flags); | |
1070 | return 1; | |
1071 | } | |
1072 | ||
1073 | } | |
1074 | ||
1075 | ||
1076 | static int olympic_close(struct net_device *dev) | |
1077 | { | |
1078 | struct olympic_private *olympic_priv=(struct olympic_private *)dev->priv; | |
1079 | u8 __iomem *olympic_mmio=olympic_priv->olympic_mmio,*srb; | |
1080 | unsigned long t,flags; | |
1081 | ||
1082 | DECLARE_WAITQUEUE(wait,current) ; | |
1083 | ||
1084 | netif_stop_queue(dev); | |
1085 | ||
1086 | writel(olympic_priv->srb,olympic_mmio+LAPA); | |
1087 | srb=olympic_priv->olympic_lap + (olympic_priv->srb & (~0xf800)); | |
1088 | ||
1089 | writeb(SRB_CLOSE_ADAPTER,srb+0); | |
1090 | writeb(0,srb+1); | |
1091 | writeb(OLYMPIC_CLEAR_RET_CODE,srb+2); | |
1092 | ||
1093 | add_wait_queue(&olympic_priv->srb_wait,&wait) ; | |
1094 | set_current_state(TASK_INTERRUPTIBLE) ; | |
1095 | ||
1096 | spin_lock_irqsave(&olympic_priv->olympic_lock,flags); | |
1097 | olympic_priv->srb_queued=1; | |
1098 | ||
1099 | writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM); | |
1100 | spin_unlock_irqrestore(&olympic_priv->olympic_lock,flags); | |
1101 | ||
1102 | while(olympic_priv->srb_queued) { | |
1103 | ||
3173c890 | 1104 | t = schedule_timeout_interruptible(60*HZ); |
1da177e4 LT |
1105 | |
1106 | if(signal_pending(current)) { | |
1107 | printk(KERN_WARNING "%s: SRB timed out.\n",dev->name); | |
1108 | printk(KERN_WARNING "SISR=%x MISR=%x\n",readl(olympic_mmio+SISR),readl(olympic_mmio+LISR)); | |
1109 | olympic_priv->srb_queued=0; | |
1110 | break; | |
1111 | } | |
1112 | ||
1113 | if (t == 0) { | |
1114 | printk(KERN_WARNING "%s: SRB timed out. May not be fatal. \n",dev->name) ; | |
1115 | } | |
1116 | olympic_priv->srb_queued=0; | |
1117 | } | |
1118 | remove_wait_queue(&olympic_priv->srb_wait,&wait) ; | |
1119 | ||
1120 | olympic_priv->rx_status_last_received++; | |
1121 | olympic_priv->rx_status_last_received&=OLYMPIC_RX_RING_SIZE-1; | |
1122 | ||
1123 | olympic_freemem(dev) ; | |
1124 | ||
1125 | /* reset tx/rx fifo's and busmaster logic */ | |
1126 | ||
1127 | writel(readl(olympic_mmio+BCTL)|(3<<13),olympic_mmio+BCTL); | |
1128 | udelay(1); | |
1129 | writel(readl(olympic_mmio+BCTL)&~(3<<13),olympic_mmio+BCTL); | |
1130 | ||
1131 | #if OLYMPIC_DEBUG | |
1132 | { | |
1133 | int i ; | |
1134 | printk("srb(%p): ",srb); | |
1135 | for(i=0;i<4;i++) | |
1136 | printk("%x ",readb(srb+i)); | |
1137 | printk("\n"); | |
1138 | } | |
1139 | #endif | |
1140 | free_irq(dev->irq,dev); | |
1141 | ||
1142 | return 0; | |
1143 | ||
1144 | } | |
1145 | ||
1146 | static void olympic_set_rx_mode(struct net_device *dev) | |
1147 | { | |
1148 | struct olympic_private *olympic_priv = (struct olympic_private *) dev->priv ; | |
1149 | u8 __iomem *olympic_mmio = olympic_priv->olympic_mmio ; | |
1150 | u8 options = 0; | |
1151 | u8 __iomem *srb; | |
1152 | struct dev_mc_list *dmi ; | |
1153 | unsigned char dev_mc_address[4] ; | |
1154 | int i ; | |
1155 | ||
1156 | writel(olympic_priv->srb,olympic_mmio+LAPA); | |
1157 | srb=olympic_priv->olympic_lap + (olympic_priv->srb & (~0xf800)); | |
1158 | options = olympic_priv->olympic_copy_all_options; | |
1159 | ||
1160 | if (dev->flags&IFF_PROMISC) | |
1161 | options |= 0x61 ; | |
1162 | else | |
1163 | options &= ~0x61 ; | |
1164 | ||
1165 | /* Only issue the srb if there is a change in options */ | |
1166 | ||
1167 | if ((options ^ olympic_priv->olympic_copy_all_options)) { | |
1168 | ||
1169 | /* Now to issue the srb command to alter the copy.all.options */ | |
1170 | ||
1171 | writeb(SRB_MODIFY_RECEIVE_OPTIONS,srb); | |
1172 | writeb(0,srb+1); | |
1173 | writeb(OLYMPIC_CLEAR_RET_CODE,srb+2); | |
1174 | writeb(0,srb+3); | |
1175 | writeb(olympic_priv->olympic_receive_options,srb+4); | |
1176 | writeb(options,srb+5); | |
1177 | ||
1178 | olympic_priv->srb_queued=2; /* Can't sleep, use srb_bh */ | |
1179 | ||
1180 | writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM); | |
1181 | ||
1182 | olympic_priv->olympic_copy_all_options = options ; | |
1183 | ||
1184 | return ; | |
1185 | } | |
1186 | ||
1187 | /* Set the functional addresses we need for multicast */ | |
1188 | ||
1189 | dev_mc_address[0] = dev_mc_address[1] = dev_mc_address[2] = dev_mc_address[3] = 0 ; | |
1190 | ||
1191 | for (i=0,dmi=dev->mc_list;i < dev->mc_count; i++,dmi = dmi->next) { | |
1192 | dev_mc_address[0] |= dmi->dmi_addr[2] ; | |
1193 | dev_mc_address[1] |= dmi->dmi_addr[3] ; | |
1194 | dev_mc_address[2] |= dmi->dmi_addr[4] ; | |
1195 | dev_mc_address[3] |= dmi->dmi_addr[5] ; | |
1196 | } | |
1197 | ||
1198 | writeb(SRB_SET_FUNC_ADDRESS,srb+0); | |
1199 | writeb(0,srb+1); | |
1200 | writeb(OLYMPIC_CLEAR_RET_CODE,srb+2); | |
1201 | writeb(0,srb+3); | |
1202 | writeb(0,srb+4); | |
1203 | writeb(0,srb+5); | |
1204 | writeb(dev_mc_address[0],srb+6); | |
1205 | writeb(dev_mc_address[1],srb+7); | |
1206 | writeb(dev_mc_address[2],srb+8); | |
1207 | writeb(dev_mc_address[3],srb+9); | |
1208 | ||
1209 | olympic_priv->srb_queued = 2 ; | |
1210 | writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM); | |
1211 | ||
1212 | } | |
1213 | ||
1214 | static void olympic_srb_bh(struct net_device *dev) | |
1215 | { | |
1216 | struct olympic_private *olympic_priv = (struct olympic_private *) dev->priv ; | |
1217 | u8 __iomem *olympic_mmio = olympic_priv->olympic_mmio ; | |
1218 | u8 __iomem *srb; | |
1219 | ||
1220 | writel(olympic_priv->srb,olympic_mmio+LAPA); | |
1221 | srb=olympic_priv->olympic_lap + (olympic_priv->srb & (~0xf800)); | |
1222 | ||
1223 | switch (readb(srb)) { | |
1224 | ||
1225 | /* SRB_MODIFY_RECEIVE_OPTIONS i.e. set_multicast_list options (promiscuous) | |
1226 | * At some point we should do something if we get an error, such as | |
1227 | * resetting the IFF_PROMISC flag in dev | |
1228 | */ | |
1229 | ||
1230 | case SRB_MODIFY_RECEIVE_OPTIONS: | |
1231 | switch (readb(srb+2)) { | |
1232 | case 0x01: | |
1233 | printk(KERN_WARNING "%s: Unrecognized srb command\n",dev->name) ; | |
1234 | break ; | |
1235 | case 0x04: | |
1236 | printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name); | |
1237 | break ; | |
1238 | default: | |
1239 | if (olympic_priv->olympic_message_level) | |
1240 | printk(KERN_WARNING "%s: Receive Options Modified to %x,%x\n",dev->name,olympic_priv->olympic_copy_all_options, olympic_priv->olympic_receive_options) ; | |
1241 | break ; | |
1242 | } /* switch srb[2] */ | |
1243 | break ; | |
1244 | ||
1245 | /* SRB_SET_GROUP_ADDRESS - Multicast group setting | |
1246 | */ | |
1247 | ||
1248 | case SRB_SET_GROUP_ADDRESS: | |
1249 | switch (readb(srb+2)) { | |
1250 | case 0x00: | |
1251 | break ; | |
1252 | case 0x01: | |
1253 | printk(KERN_WARNING "%s: Unrecognized srb command \n",dev->name) ; | |
1254 | break ; | |
1255 | case 0x04: | |
1256 | printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name); | |
1257 | break ; | |
1258 | case 0x3c: | |
1259 | printk(KERN_WARNING "%s: Group/Functional address indicator bits not set correctly\n",dev->name) ; | |
1260 | break ; | |
1261 | case 0x3e: /* If we ever implement individual multicast addresses, will need to deal with this */ | |
1262 | printk(KERN_WARNING "%s: Group address registers full\n",dev->name) ; | |
1263 | break ; | |
1264 | case 0x55: | |
1265 | printk(KERN_INFO "%s: Group Address already set.\n",dev->name) ; | |
1266 | break ; | |
1267 | default: | |
1268 | break ; | |
1269 | } /* switch srb[2] */ | |
1270 | break ; | |
1271 | ||
1272 | /* SRB_RESET_GROUP_ADDRESS - Remove a multicast address from group list | |
1273 | */ | |
1274 | ||
1275 | case SRB_RESET_GROUP_ADDRESS: | |
1276 | switch (readb(srb+2)) { | |
1277 | case 0x00: | |
1278 | break ; | |
1279 | case 0x01: | |
1280 | printk(KERN_WARNING "%s: Unrecognized srb command \n",dev->name) ; | |
1281 | break ; | |
1282 | case 0x04: | |
1283 | printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name) ; | |
1284 | break ; | |
1285 | case 0x39: /* Must deal with this if individual multicast addresses used */ | |
1286 | printk(KERN_INFO "%s: Group address not found \n",dev->name); | |
1287 | break ; | |
1288 | default: | |
1289 | break ; | |
1290 | } /* switch srb[2] */ | |
1291 | break ; | |
1292 | ||
1293 | ||
1294 | /* SRB_SET_FUNC_ADDRESS - Called by the set_rx_mode | |
1295 | */ | |
1296 | ||
1297 | case SRB_SET_FUNC_ADDRESS: | |
1298 | switch (readb(srb+2)) { | |
1299 | case 0x00: | |
1300 | if (olympic_priv->olympic_message_level) | |
1301 | printk(KERN_INFO "%s: Functional Address Mask Set \n",dev->name) ; | |
1302 | break ; | |
1303 | case 0x01: | |
1304 | printk(KERN_WARNING "%s: Unrecognized srb command \n",dev->name) ; | |
1305 | break ; | |
1306 | case 0x04: | |
1307 | printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name) ; | |
1308 | break ; | |
1309 | default: | |
1310 | break ; | |
1311 | } /* switch srb[2] */ | |
1312 | break ; | |
1313 | ||
1314 | /* SRB_READ_LOG - Read and reset the adapter error counters | |
1315 | */ | |
1316 | ||
1317 | case SRB_READ_LOG: | |
1318 | switch (readb(srb+2)) { | |
1319 | case 0x00: | |
1320 | if (olympic_priv->olympic_message_level) | |
1321 | printk(KERN_INFO "%s: Read Log issued\n",dev->name) ; | |
1322 | break ; | |
1323 | case 0x01: | |
1324 | printk(KERN_WARNING "%s: Unrecognized srb command \n",dev->name) ; | |
1325 | break ; | |
1326 | case 0x04: | |
1327 | printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name) ; | |
1328 | break ; | |
1329 | ||
1330 | } /* switch srb[2] */ | |
1331 | break ; | |
1332 | ||
1333 | /* SRB_READ_SR_COUNTERS - Read and reset the source routing bridge related counters */ | |
1334 | ||
1335 | case SRB_READ_SR_COUNTERS: | |
1336 | switch (readb(srb+2)) { | |
1337 | case 0x00: | |
1338 | if (olympic_priv->olympic_message_level) | |
1339 | printk(KERN_INFO "%s: Read Source Routing Counters issued\n",dev->name) ; | |
1340 | break ; | |
1341 | case 0x01: | |
1342 | printk(KERN_WARNING "%s: Unrecognized srb command \n",dev->name) ; | |
1343 | break ; | |
1344 | case 0x04: | |
1345 | printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name) ; | |
1346 | break ; | |
1347 | default: | |
1348 | break ; | |
1349 | } /* switch srb[2] */ | |
1350 | break ; | |
1351 | ||
1352 | default: | |
1353 | printk(KERN_WARNING "%s: Unrecognized srb bh return value.\n",dev->name); | |
1354 | break ; | |
1355 | } /* switch srb[0] */ | |
1356 | ||
1357 | } | |
1358 | ||
1359 | static struct net_device_stats * olympic_get_stats(struct net_device *dev) | |
1360 | { | |
1361 | struct olympic_private *olympic_priv ; | |
1362 | olympic_priv=(struct olympic_private *) dev->priv; | |
1363 | return (struct net_device_stats *) &olympic_priv->olympic_stats; | |
1364 | } | |
1365 | ||
1366 | static int olympic_set_mac_address (struct net_device *dev, void *addr) | |
1367 | { | |
1368 | struct sockaddr *saddr = addr ; | |
1369 | struct olympic_private *olympic_priv = (struct olympic_private *)dev->priv ; | |
1370 | ||
1371 | if (netif_running(dev)) { | |
1372 | printk(KERN_WARNING "%s: Cannot set mac/laa address while card is open\n", dev->name) ; | |
1373 | return -EIO ; | |
1374 | } | |
1375 | ||
1376 | memcpy(olympic_priv->olympic_laa, saddr->sa_data,dev->addr_len) ; | |
1377 | ||
1378 | if (olympic_priv->olympic_message_level) { | |
1379 | printk(KERN_INFO "%s: MAC/LAA Set to = %x.%x.%x.%x.%x.%x\n",dev->name, olympic_priv->olympic_laa[0], | |
1380 | olympic_priv->olympic_laa[1], olympic_priv->olympic_laa[2], | |
1381 | olympic_priv->olympic_laa[3], olympic_priv->olympic_laa[4], | |
1382 | olympic_priv->olympic_laa[5]); | |
1383 | } | |
1384 | ||
1385 | return 0 ; | |
1386 | } | |
1387 | ||
1388 | static void olympic_arb_cmd(struct net_device *dev) | |
1389 | { | |
1390 | struct olympic_private *olympic_priv = (struct olympic_private *) dev->priv; | |
1391 | u8 __iomem *olympic_mmio=olympic_priv->olympic_mmio; | |
1392 | u8 __iomem *arb_block, *asb_block, *srb ; | |
1393 | u8 header_len ; | |
1394 | u16 frame_len, buffer_len ; | |
1395 | struct sk_buff *mac_frame ; | |
1396 | u8 __iomem *buf_ptr ; | |
1397 | u8 __iomem *frame_data ; | |
1398 | u16 buff_off ; | |
1399 | u16 lan_status = 0, lan_status_diff ; /* Initialize to stop compiler warning */ | |
1400 | u8 fdx_prot_error ; | |
1401 | u16 next_ptr; | |
1402 | ||
1403 | arb_block = (olympic_priv->olympic_lap + olympic_priv->arb) ; | |
1404 | asb_block = (olympic_priv->olympic_lap + olympic_priv->asb) ; | |
1405 | srb = (olympic_priv->olympic_lap + olympic_priv->srb) ; | |
1406 | ||
1407 | if (readb(arb_block+0) == ARB_RECEIVE_DATA) { /* Receive.data, MAC frames */ | |
1408 | ||
1409 | header_len = readb(arb_block+8) ; /* 802.5 Token-Ring Header Length */ | |
1410 | frame_len = swab16(readw(arb_block + 10)) ; | |
1411 | ||
1412 | buff_off = swab16(readw(arb_block + 6)) ; | |
1413 | ||
1414 | buf_ptr = olympic_priv->olympic_lap + buff_off ; | |
1415 | ||
1416 | #if OLYMPIC_DEBUG | |
1417 | { | |
1418 | int i; | |
1419 | frame_data = buf_ptr+offsetof(struct mac_receive_buffer,frame_data) ; | |
1420 | ||
1421 | for (i=0 ; i < 14 ; i++) { | |
1422 | printk("Loc %d = %02x\n",i,readb(frame_data + i)); | |
1423 | } | |
1424 | ||
1425 | printk("next %04x, fs %02x, len %04x \n",readw(buf_ptr+offsetof(struct mac_receive_buffer,next)), readb(buf_ptr+offsetof(struct mac_receive_buffer,frame_status)), readw(buf_ptr+offsetof(struct mac_receive_buffer,buffer_length))); | |
1426 | } | |
1427 | #endif | |
1428 | mac_frame = dev_alloc_skb(frame_len) ; | |
1429 | if (!mac_frame) { | |
1430 | printk(KERN_WARNING "%s: Memory squeeze, dropping frame.\n", dev->name); | |
1431 | goto drop_frame; | |
1432 | } | |
1433 | ||
1434 | /* Walk the buffer chain, creating the frame */ | |
1435 | ||
1436 | do { | |
1437 | frame_data = buf_ptr+offsetof(struct mac_receive_buffer,frame_data) ; | |
1438 | buffer_len = swab16(readw(buf_ptr+offsetof(struct mac_receive_buffer,buffer_length))); | |
1439 | memcpy_fromio(skb_put(mac_frame, buffer_len), frame_data , buffer_len ) ; | |
1440 | next_ptr=readw(buf_ptr+offsetof(struct mac_receive_buffer,next)); | |
1441 | } while (next_ptr && (buf_ptr=olympic_priv->olympic_lap + ntohs(next_ptr))); | |
1442 | ||
1443 | if (olympic_priv->olympic_network_monitor) { | |
1444 | struct trh_hdr *mac_hdr ; | |
1445 | printk(KERN_WARNING "%s: Received MAC Frame, details: \n",dev->name) ; | |
1446 | mac_hdr = (struct trh_hdr *)mac_frame->data ; | |
1447 | printk(KERN_WARNING "%s: MAC Frame Dest. Addr: %02x:%02x:%02x:%02x:%02x:%02x \n", dev->name , mac_hdr->daddr[0], mac_hdr->daddr[1], mac_hdr->daddr[2], mac_hdr->daddr[3], mac_hdr->daddr[4], mac_hdr->daddr[5]) ; | |
1448 | printk(KERN_WARNING "%s: MAC Frame Srce. Addr: %02x:%02x:%02x:%02x:%02x:%02x \n", dev->name , mac_hdr->saddr[0], mac_hdr->saddr[1], mac_hdr->saddr[2], mac_hdr->saddr[3], mac_hdr->saddr[4], mac_hdr->saddr[5]) ; | |
1449 | } | |
1450 | mac_frame->dev = dev ; | |
1451 | mac_frame->protocol = tr_type_trans(mac_frame,dev); | |
1452 | netif_rx(mac_frame) ; | |
1453 | dev->last_rx = jiffies; | |
1454 | ||
1455 | drop_frame: | |
1456 | /* Now tell the card we have dealt with the received frame */ | |
1457 | ||
1458 | /* Set LISR Bit 1 */ | |
1459 | writel(LISR_ARB_FREE,olympic_priv->olympic_mmio + LISR_SUM); | |
1460 | ||
1461 | /* Is the ASB free ? */ | |
1462 | ||
1463 | if (readb(asb_block + 2) != 0xff) { | |
1464 | olympic_priv->asb_queued = 1 ; | |
1465 | writel(LISR_ASB_FREE_REQ,olympic_priv->olympic_mmio+LISR_SUM); | |
1466 | return ; | |
1467 | /* Drop out and wait for the bottom half to be run */ | |
1468 | } | |
1469 | ||
1470 | writeb(ASB_RECEIVE_DATA,asb_block); /* Receive data */ | |
1471 | writeb(OLYMPIC_CLEAR_RET_CODE,asb_block+2); /* Necessary ?? */ | |
1472 | writeb(readb(arb_block+6),asb_block+6); /* Must send the address back to the adapter */ | |
1473 | writeb(readb(arb_block+7),asb_block+7); /* To let it know we have dealt with the data */ | |
1474 | ||
1475 | writel(LISR_ASB_REPLY | LISR_ASB_FREE_REQ,olympic_priv->olympic_mmio+LISR_SUM); | |
1476 | ||
1477 | olympic_priv->asb_queued = 2 ; | |
1478 | ||
1479 | return ; | |
1480 | ||
1481 | } else if (readb(arb_block) == ARB_LAN_CHANGE_STATUS) { /* Lan.change.status */ | |
1482 | lan_status = swab16(readw(arb_block+6)); | |
1483 | fdx_prot_error = readb(arb_block+8) ; | |
1484 | ||
1485 | /* Issue ARB Free */ | |
1486 | writel(LISR_ARB_FREE,olympic_priv->olympic_mmio+LISR_SUM); | |
1487 | ||
1488 | lan_status_diff = olympic_priv->olympic_lan_status ^ lan_status ; | |
1489 | ||
1490 | if (lan_status_diff & (LSC_LWF | LSC_ARW | LSC_FPE | LSC_RR) ) { | |
1491 | if (lan_status_diff & LSC_LWF) | |
1492 | printk(KERN_WARNING "%s: Short circuit detected on the lobe\n",dev->name); | |
1493 | if (lan_status_diff & LSC_ARW) | |
1494 | printk(KERN_WARNING "%s: Auto removal error\n",dev->name); | |
1495 | if (lan_status_diff & LSC_FPE) | |
1496 | printk(KERN_WARNING "%s: FDX Protocol Error\n",dev->name); | |
1497 | if (lan_status_diff & LSC_RR) | |
1498 | printk(KERN_WARNING "%s: Force remove MAC frame received\n",dev->name); | |
1499 | ||
1500 | /* Adapter has been closed by the hardware */ | |
1501 | ||
1502 | /* reset tx/rx fifo's and busmaster logic */ | |
1503 | ||
1504 | writel(readl(olympic_mmio+BCTL)|(3<<13),olympic_mmio+BCTL); | |
1505 | udelay(1); | |
1506 | writel(readl(olympic_mmio+BCTL)&~(3<<13),olympic_mmio+BCTL); | |
1507 | netif_stop_queue(dev); | |
1508 | olympic_priv->srb = readw(olympic_priv->olympic_lap + LAPWWO) ; | |
1509 | printk(KERN_WARNING "%s: Adapter has been closed \n", dev->name) ; | |
1510 | } /* If serious error */ | |
1511 | ||
1512 | if (olympic_priv->olympic_message_level) { | |
1513 | if (lan_status_diff & LSC_SIG_LOSS) | |
1514 | printk(KERN_WARNING "%s: No receive signal detected \n", dev->name) ; | |
1515 | if (lan_status_diff & LSC_HARD_ERR) | |
1516 | printk(KERN_INFO "%s: Beaconing \n",dev->name); | |
1517 | if (lan_status_diff & LSC_SOFT_ERR) | |
1518 | printk(KERN_WARNING "%s: Adapter transmitted Soft Error Report Mac Frame \n",dev->name); | |
1519 | if (lan_status_diff & LSC_TRAN_BCN) | |
1520 | printk(KERN_INFO "%s: We are tranmitting the beacon, aaah\n",dev->name); | |
1521 | if (lan_status_diff & LSC_SS) | |
1522 | printk(KERN_INFO "%s: Single Station on the ring \n", dev->name); | |
1523 | if (lan_status_diff & LSC_RING_REC) | |
1524 | printk(KERN_INFO "%s: Ring recovery ongoing\n",dev->name); | |
1525 | if (lan_status_diff & LSC_FDX_MODE) | |
1526 | printk(KERN_INFO "%s: Operating in FDX mode\n",dev->name); | |
1527 | } | |
1528 | ||
1529 | if (lan_status_diff & LSC_CO) { | |
1530 | ||
1531 | if (olympic_priv->olympic_message_level) | |
1532 | printk(KERN_INFO "%s: Counter Overflow \n", dev->name); | |
1533 | ||
1534 | /* Issue READ.LOG command */ | |
1535 | ||
1536 | writeb(SRB_READ_LOG, srb); | |
1537 | writeb(0,srb+1); | |
1538 | writeb(OLYMPIC_CLEAR_RET_CODE,srb+2); | |
1539 | writeb(0,srb+3); | |
1540 | writeb(0,srb+4); | |
1541 | writeb(0,srb+5); | |
1542 | ||
1543 | olympic_priv->srb_queued=2; /* Can't sleep, use srb_bh */ | |
1544 | ||
1545 | writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM); | |
1546 | ||
1547 | } | |
1548 | ||
1549 | if (lan_status_diff & LSC_SR_CO) { | |
1550 | ||
1551 | if (olympic_priv->olympic_message_level) | |
1552 | printk(KERN_INFO "%s: Source routing counters overflow\n", dev->name); | |
1553 | ||
1554 | /* Issue a READ.SR.COUNTERS */ | |
1555 | ||
1556 | writeb(SRB_READ_SR_COUNTERS,srb); | |
1557 | writeb(0,srb+1); | |
1558 | writeb(OLYMPIC_CLEAR_RET_CODE,srb+2); | |
1559 | writeb(0,srb+3); | |
1560 | ||
1561 | olympic_priv->srb_queued=2; /* Can't sleep, use srb_bh */ | |
1562 | ||
1563 | writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM); | |
1564 | ||
1565 | } | |
1566 | ||
1567 | olympic_priv->olympic_lan_status = lan_status ; | |
1568 | ||
1569 | } /* Lan.change.status */ | |
1570 | else | |
1571 | printk(KERN_WARNING "%s: Unknown arb command \n", dev->name); | |
1572 | } | |
1573 | ||
1574 | static void olympic_asb_bh(struct net_device *dev) | |
1575 | { | |
1576 | struct olympic_private *olympic_priv = (struct olympic_private *) dev->priv ; | |
1577 | u8 __iomem *arb_block, *asb_block ; | |
1578 | ||
1579 | arb_block = (olympic_priv->olympic_lap + olympic_priv->arb) ; | |
1580 | asb_block = (olympic_priv->olympic_lap + olympic_priv->asb) ; | |
1581 | ||
1582 | if (olympic_priv->asb_queued == 1) { /* Dropped through the first time */ | |
1583 | ||
1584 | writeb(ASB_RECEIVE_DATA,asb_block); /* Receive data */ | |
1585 | writeb(OLYMPIC_CLEAR_RET_CODE,asb_block+2); /* Necessary ?? */ | |
1586 | writeb(readb(arb_block+6),asb_block+6); /* Must send the address back to the adapter */ | |
1587 | writeb(readb(arb_block+7),asb_block+7); /* To let it know we have dealt with the data */ | |
1588 | ||
1589 | writel(LISR_ASB_REPLY | LISR_ASB_FREE_REQ,olympic_priv->olympic_mmio+LISR_SUM); | |
1590 | olympic_priv->asb_queued = 2 ; | |
1591 | ||
1592 | return ; | |
1593 | } | |
1594 | ||
1595 | if (olympic_priv->asb_queued == 2) { | |
1596 | switch (readb(asb_block+2)) { | |
1597 | case 0x01: | |
1598 | printk(KERN_WARNING "%s: Unrecognized command code \n", dev->name); | |
1599 | break ; | |
1600 | case 0x26: | |
1601 | printk(KERN_WARNING "%s: Unrecognized buffer address \n", dev->name); | |
1602 | break ; | |
1603 | case 0xFF: | |
1604 | /* Valid response, everything should be ok again */ | |
1605 | break ; | |
1606 | default: | |
1607 | printk(KERN_WARNING "%s: Invalid return code in asb\n",dev->name); | |
1608 | break ; | |
1609 | } | |
1610 | } | |
1611 | olympic_priv->asb_queued = 0 ; | |
1612 | } | |
1613 | ||
1614 | static int olympic_change_mtu(struct net_device *dev, int mtu) | |
1615 | { | |
1616 | struct olympic_private *olympic_priv = (struct olympic_private *) dev->priv; | |
1617 | u16 max_mtu ; | |
1618 | ||
1619 | if (olympic_priv->olympic_ring_speed == 4) | |
1620 | max_mtu = 4500 ; | |
1621 | else | |
1622 | max_mtu = 18000 ; | |
1623 | ||
1624 | if (mtu > max_mtu) | |
1625 | return -EINVAL ; | |
1626 | if (mtu < 100) | |
1627 | return -EINVAL ; | |
1628 | ||
1629 | dev->mtu = mtu ; | |
1630 | olympic_priv->pkt_buf_sz = mtu + TR_HLEN ; | |
1631 | ||
1632 | return 0 ; | |
1633 | } | |
1634 | ||
1635 | static int olympic_proc_info(char *buffer, char **start, off_t offset, int length, int *eof, void *data) | |
1636 | { | |
1637 | struct net_device *dev = (struct net_device *)data ; | |
1638 | struct olympic_private *olympic_priv=(struct olympic_private *)dev->priv; | |
1639 | u8 __iomem *oat = (olympic_priv->olympic_lap + olympic_priv->olympic_addr_table_addr) ; | |
1640 | u8 __iomem *opt = (olympic_priv->olympic_lap + olympic_priv->olympic_parms_addr) ; | |
1641 | int size = 0 ; | |
1642 | int len=0; | |
1643 | off_t begin=0; | |
1644 | off_t pos=0; | |
1645 | ||
1646 | size = sprintf(buffer, | |
1647 | "IBM Pit/Pit-Phy/Olympic Chipset Token Ring Adapter %s\n",dev->name); | |
1648 | size += sprintf(buffer+size, "\n%6s: Adapter Address : Node Address : Functional Addr\n", | |
1649 | dev->name); | |
1650 | ||
1651 | size += sprintf(buffer+size, "%6s: %02x:%02x:%02x:%02x:%02x:%02x : %02x:%02x:%02x:%02x:%02x:%02x : %02x:%02x:%02x:%02x\n", | |
1652 | dev->name, | |
1653 | dev->dev_addr[0], | |
1654 | dev->dev_addr[1], | |
1655 | dev->dev_addr[2], | |
1656 | dev->dev_addr[3], | |
1657 | dev->dev_addr[4], | |
1658 | dev->dev_addr[5], | |
1659 | readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)), | |
1660 | readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+1), | |
1661 | readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+2), | |
1662 | readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+3), | |
1663 | readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+4), | |
1664 | readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+5), | |
1665 | readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)), | |
1666 | readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+1), | |
1667 | readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+2), | |
1668 | readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+3)); | |
1669 | ||
1670 | size += sprintf(buffer+size, "\n%6s: Token Ring Parameters Table:\n", dev->name); | |
1671 | ||
1672 | size += sprintf(buffer+size, "%6s: Physical Addr : Up Node Address : Poll Address : AccPri : Auth Src : Att Code :\n", | |
1673 | dev->name) ; | |
1674 | ||
1675 | size += sprintf(buffer+size, "%6s: %02x:%02x:%02x:%02x : %02x:%02x:%02x:%02x:%02x:%02x : %02x:%02x:%02x:%02x:%02x:%02x : %04x : %04x : %04x :\n", | |
1676 | dev->name, | |
1677 | readb(opt+offsetof(struct olympic_parameters_table, phys_addr)), | |
1678 | readb(opt+offsetof(struct olympic_parameters_table, phys_addr)+1), | |
1679 | readb(opt+offsetof(struct olympic_parameters_table, phys_addr)+2), | |
1680 | readb(opt+offsetof(struct olympic_parameters_table, phys_addr)+3), | |
1681 | readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)), | |
1682 | readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+1), | |
1683 | readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+2), | |
1684 | readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+3), | |
1685 | readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+4), | |
1686 | readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+5), | |
1687 | readb(opt+offsetof(struct olympic_parameters_table, poll_addr)), | |
1688 | readb(opt+offsetof(struct olympic_parameters_table, poll_addr)+1), | |
1689 | readb(opt+offsetof(struct olympic_parameters_table, poll_addr)+2), | |
1690 | readb(opt+offsetof(struct olympic_parameters_table, poll_addr)+3), | |
1691 | readb(opt+offsetof(struct olympic_parameters_table, poll_addr)+4), | |
1692 | readb(opt+offsetof(struct olympic_parameters_table, poll_addr)+5), | |
1693 | swab16(readw(opt+offsetof(struct olympic_parameters_table, acc_priority))), | |
1694 | swab16(readw(opt+offsetof(struct olympic_parameters_table, auth_source_class))), | |
1695 | swab16(readw(opt+offsetof(struct olympic_parameters_table, att_code)))); | |
1696 | ||
1697 | size += sprintf(buffer+size, "%6s: Source Address : Bcn T : Maj. V : Lan St : Lcl Rg : Mon Err : Frame Correl : \n", | |
1698 | dev->name) ; | |
1699 | ||
1700 | size += sprintf(buffer+size, "%6s: %02x:%02x:%02x:%02x:%02x:%02x : %04x : %04x : %04x : %04x : %04x : %04x : \n", | |
1701 | dev->name, | |
1702 | readb(opt+offsetof(struct olympic_parameters_table, source_addr)), | |
1703 | readb(opt+offsetof(struct olympic_parameters_table, source_addr)+1), | |
1704 | readb(opt+offsetof(struct olympic_parameters_table, source_addr)+2), | |
1705 | readb(opt+offsetof(struct olympic_parameters_table, source_addr)+3), | |
1706 | readb(opt+offsetof(struct olympic_parameters_table, source_addr)+4), | |
1707 | readb(opt+offsetof(struct olympic_parameters_table, source_addr)+5), | |
1708 | swab16(readw(opt+offsetof(struct olympic_parameters_table, beacon_type))), | |
1709 | swab16(readw(opt+offsetof(struct olympic_parameters_table, major_vector))), | |
1710 | swab16(readw(opt+offsetof(struct olympic_parameters_table, lan_status))), | |
1711 | swab16(readw(opt+offsetof(struct olympic_parameters_table, local_ring))), | |
1712 | swab16(readw(opt+offsetof(struct olympic_parameters_table, mon_error))), | |
1713 | swab16(readw(opt+offsetof(struct olympic_parameters_table, frame_correl)))); | |
1714 | ||
1715 | size += sprintf(buffer+size, "%6s: Beacon Details : Tx : Rx : NAUN Node Address : NAUN Node Phys : \n", | |
1716 | dev->name) ; | |
1717 | ||
1718 | size += sprintf(buffer+size, "%6s: : %02x : %02x : %02x:%02x:%02x:%02x:%02x:%02x : %02x:%02x:%02x:%02x : \n", | |
1719 | dev->name, | |
1720 | swab16(readw(opt+offsetof(struct olympic_parameters_table, beacon_transmit))), | |
1721 | swab16(readw(opt+offsetof(struct olympic_parameters_table, beacon_receive))), | |
1722 | readb(opt+offsetof(struct olympic_parameters_table, beacon_naun)), | |
1723 | readb(opt+offsetof(struct olympic_parameters_table, beacon_naun)+1), | |
1724 | readb(opt+offsetof(struct olympic_parameters_table, beacon_naun)+2), | |
1725 | readb(opt+offsetof(struct olympic_parameters_table, beacon_naun)+3), | |
1726 | readb(opt+offsetof(struct olympic_parameters_table, beacon_naun)+4), | |
1727 | readb(opt+offsetof(struct olympic_parameters_table, beacon_naun)+5), | |
1728 | readb(opt+offsetof(struct olympic_parameters_table, beacon_phys)), | |
1729 | readb(opt+offsetof(struct olympic_parameters_table, beacon_phys)+1), | |
1730 | readb(opt+offsetof(struct olympic_parameters_table, beacon_phys)+2), | |
1731 | readb(opt+offsetof(struct olympic_parameters_table, beacon_phys)+3)); | |
1732 | ||
1733 | len=size; | |
1734 | pos=begin+size; | |
1735 | if (pos<offset) { | |
1736 | len=0; | |
1737 | begin=pos; | |
1738 | } | |
1739 | *start=buffer+(offset-begin); /* Start of wanted data */ | |
1740 | len-=(offset-begin); /* Start slop */ | |
1741 | if(len>length) | |
1742 | len=length; /* Ending slop */ | |
1743 | return len; | |
1744 | } | |
1745 | ||
1746 | static void __devexit olympic_remove_one(struct pci_dev *pdev) | |
1747 | { | |
1748 | struct net_device *dev = pci_get_drvdata(pdev) ; | |
1749 | struct olympic_private *olympic_priv=(struct olympic_private *)dev->priv; | |
1750 | ||
1751 | if (olympic_priv->olympic_network_monitor) { | |
1752 | char proc_name[20] ; | |
1753 | strcpy(proc_name,"net/olympic_") ; | |
1754 | strcat(proc_name,dev->name) ; | |
1755 | remove_proc_entry(proc_name,NULL); | |
1756 | } | |
1757 | unregister_netdev(dev) ; | |
1758 | iounmap(olympic_priv->olympic_mmio) ; | |
1759 | iounmap(olympic_priv->olympic_lap) ; | |
1760 | pci_release_regions(pdev) ; | |
1761 | pci_set_drvdata(pdev,NULL) ; | |
1762 | free_netdev(dev) ; | |
1763 | } | |
1764 | ||
1765 | static struct pci_driver olympic_driver = { | |
1766 | .name = "olympic", | |
1767 | .id_table = olympic_pci_tbl, | |
1768 | .probe = olympic_probe, | |
1769 | .remove = __devexit_p(olympic_remove_one), | |
1770 | }; | |
1771 | ||
1772 | static int __init olympic_pci_init(void) | |
1773 | { | |
1774 | return pci_module_init (&olympic_driver) ; | |
1775 | } | |
1776 | ||
1777 | static void __exit olympic_pci_cleanup(void) | |
1778 | { | |
1779 | pci_unregister_driver(&olympic_driver) ; | |
1780 | } | |
1781 | ||
1782 | ||
1783 | module_init(olympic_pci_init) ; | |
1784 | module_exit(olympic_pci_cleanup) ; | |
1785 | ||
1786 | MODULE_LICENSE("GPL"); |