Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | drivers/net/tulip/pnic2.c | |
3 | ||
6b92801b | 4 | Maintained by Valerie Henson <val_henson@linux.intel.com> |
1da177e4 LT |
5 | Copyright 2000,2001 The Linux Kernel Team |
6 | Written/copyright 1994-2001 by Donald Becker. | |
7 | Modified to hep support PNIC_II by Kevin B. Hendricks | |
8 | ||
9 | This software may be used and distributed according to the terms | |
10 | of the GNU General Public License, incorporated herein by reference. | |
11 | ||
12 | Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html} | |
13 | for more information on this driver, or visit the project | |
14 | Web page at http://sourceforge.net/projects/tulip/ | |
15 | ||
16 | */ | |
17 | ||
18 | ||
19 | /* Understanding the PNIC_II - everything is this file is based | |
20 | * on the PNIC_II_PDF datasheet which is sorely lacking in detail | |
21 | * | |
22 | * As I understand things, here are the registers and bits that | |
23 | * explain the masks and constants used in this file that are | |
24 | * either different from the 21142/3 or important for basic operation. | |
25 | * | |
26 | * | |
27 | * CSR 6 (mask = 0xfe3bd1fd of bits not to change) | |
28 | * ----- | |
29 | * Bit 24 - SCR | |
30 | * Bit 23 - PCS | |
31 | * Bit 22 - TTM (Trasmit Threshold Mode) | |
32 | * Bit 18 - Port Select | |
33 | * Bit 13 - Start - 1, Stop - 0 Transmissions | |
34 | * Bit 11:10 - Loop Back Operation Mode | |
35 | * Bit 9 - Full Duplex mode (Advertise 10BaseT-FD is CSR14<7> is set) | |
36 | * Bit 1 - Start - 1, Stop - 0 Receive | |
37 | * | |
38 | * | |
39 | * CSR 14 (mask = 0xfff0ee39 of bits not to change) | |
40 | * ------ | |
41 | * Bit 19 - PAUSE-Pause | |
42 | * Bit 18 - Advertise T4 | |
43 | * Bit 17 - Advertise 100baseTx-FD | |
44 | * Bit 16 - Advertise 100baseTx-HD | |
45 | * Bit 12 - LTE - Link Test Enable | |
46 | * Bit 7 - ANE - Auto Negotiate Enable | |
47 | * Bit 6 - HDE - Advertise 10baseT-HD | |
48 | * Bit 2 - Reset to Power down - kept as 1 for normal operation | |
49 | * Bit 1 - Loop Back enable for 10baseT MCC | |
50 | * | |
51 | * | |
52 | * CSR 12 | |
53 | * ------ | |
54 | * Bit 25 - Partner can do T4 | |
55 | * Bit 24 - Partner can do 100baseTx-FD | |
56 | * Bit 23 - Partner can do 100baseTx-HD | |
57 | * Bit 22 - Partner can do 10baseT-FD | |
58 | * Bit 21 - Partner can do 10baseT-HD | |
59 | * Bit 15 - LPN is 1 if all above bits are valid other wise 0 | |
60 | * Bit 14:12 - autonegotiation state (write 001 to start autonegotiate) | |
61 | * Bit 3 - Autopolarity state | |
62 | * Bit 2 - LS10B - link state of 10baseT 0 - good, 1 - failed | |
63 | * Bit 1 - LS100B - link state of 100baseT 0 - good, 1- faild | |
64 | * | |
65 | * | |
66 | * Data Port Selection Info | |
67 | *------------------------- | |
68 | * | |
69 | * CSR14<7> CSR6<18> CSR6<22> CSR6<23> CSR6<24> MODE/PORT | |
70 | * 1 0 0 (X) 0 (X) 1 NWAY | |
71 | * 0 0 1 0 (X) 0 10baseT | |
72 | * 0 1 0 1 1 (X) 100baseT | |
73 | * | |
74 | * | |
75 | */ | |
76 | ||
77 | ||
78 | ||
1da177e4 LT |
79 | #include "tulip.h" |
80 | #include <linux/delay.h> | |
81 | ||
82 | ||
83 | void pnic2_timer(unsigned long data) | |
84 | { | |
85 | struct net_device *dev = (struct net_device *)data; | |
86 | struct tulip_private *tp = netdev_priv(dev); | |
87 | void __iomem *ioaddr = tp->base_addr; | |
88 | int next_tick = 60*HZ; | |
89 | ||
90 | if (tulip_debug > 3) | |
91 | printk(KERN_INFO"%s: PNIC2 negotiation status %8.8x.\n", | |
92 | dev->name,ioread32(ioaddr + CSR12)); | |
93 | ||
94 | if (next_tick) { | |
95 | mod_timer(&tp->timer, RUN_AT(next_tick)); | |
96 | } | |
97 | } | |
98 | ||
99 | ||
100 | void pnic2_start_nway(struct net_device *dev) | |
101 | { | |
102 | struct tulip_private *tp = netdev_priv(dev); | |
103 | void __iomem *ioaddr = tp->base_addr; | |
104 | int csr14; | |
105 | int csr12; | |
106 | ||
107 | /* set up what to advertise during the negotiation */ | |
108 | ||
109 | /* load in csr14 and mask off bits not to touch | |
110 | * comment at top of file explains mask value | |
111 | */ | |
112 | csr14 = (ioread32(ioaddr + CSR14) & 0xfff0ee39); | |
113 | ||
114 | /* bit 17 - advetise 100baseTx-FD */ | |
115 | if (tp->sym_advertise & 0x0100) csr14 |= 0x00020000; | |
116 | ||
117 | /* bit 16 - advertise 100baseTx-HD */ | |
118 | if (tp->sym_advertise & 0x0080) csr14 |= 0x00010000; | |
119 | ||
120 | /* bit 6 - advertise 10baseT-HD */ | |
121 | if (tp->sym_advertise & 0x0020) csr14 |= 0x00000040; | |
122 | ||
123 | /* Now set bit 12 Link Test Enable, Bit 7 Autonegotiation Enable | |
124 | * and bit 0 Don't PowerDown 10baseT | |
125 | */ | |
126 | csr14 |= 0x00001184; | |
127 | ||
128 | if (tulip_debug > 1) | |
129 | printk(KERN_DEBUG "%s: Restarting PNIC2 autonegotiation, " | |
130 | "csr14=%8.8x.\n", dev->name, csr14); | |
131 | ||
132 | /* tell pnic2_lnk_change we are doing an nway negotiation */ | |
133 | dev->if_port = 0; | |
134 | tp->nway = tp->mediasense = 1; | |
135 | tp->nwayset = tp->lpar = 0; | |
136 | ||
137 | /* now we have to set up csr6 for NWAY state */ | |
138 | ||
139 | tp->csr6 = ioread32(ioaddr + CSR6); | |
140 | if (tulip_debug > 1) | |
141 | printk(KERN_DEBUG "%s: On Entry to Nway, " | |
142 | "csr6=%8.8x.\n", dev->name, tp->csr6); | |
143 | ||
144 | /* mask off any bits not to touch | |
145 | * comment at top of file explains mask value | |
146 | */ | |
147 | tp->csr6 = tp->csr6 & 0xfe3bd1fd; | |
148 | ||
149 | /* don't forget that bit 9 is also used for advertising */ | |
150 | /* advertise 10baseT-FD for the negotiation (bit 9) */ | |
151 | if (tp->sym_advertise & 0x0040) tp->csr6 |= 0x00000200; | |
152 | ||
153 | /* set bit 24 for nway negotiation mode ... | |
154 | * see Data Port Selection comment at top of file | |
155 | * and "Stop" - reset both Transmit (bit 13) and Receive (bit 1) | |
156 | */ | |
157 | tp->csr6 |= 0x01000000; | |
158 | iowrite32(csr14, ioaddr + CSR14); | |
159 | iowrite32(tp->csr6, ioaddr + CSR6); | |
160 | udelay(100); | |
161 | ||
162 | /* all set up so now force the negotiation to begin */ | |
163 | ||
164 | /* read in current values and mask off all but the | |
165 | * Autonegotiation bits 14:12. Writing a 001 to those bits | |
166 | * should start the autonegotiation | |
167 | */ | |
168 | csr12 = (ioread32(ioaddr + CSR12) & 0xffff8fff); | |
169 | csr12 |= 0x1000; | |
170 | iowrite32(csr12, ioaddr + CSR12); | |
171 | } | |
172 | ||
173 | ||
174 | ||
175 | void pnic2_lnk_change(struct net_device *dev, int csr5) | |
176 | { | |
177 | struct tulip_private *tp = netdev_priv(dev); | |
178 | void __iomem *ioaddr = tp->base_addr; | |
179 | int csr14; | |
180 | ||
181 | /* read the staus register to find out what is up */ | |
182 | int csr12 = ioread32(ioaddr + CSR12); | |
183 | ||
184 | if (tulip_debug > 1) | |
185 | printk(KERN_INFO"%s: PNIC2 link status interrupt %8.8x, " | |
186 | " CSR5 %x, %8.8x.\n", dev->name, csr12, | |
187 | csr5, ioread32(ioaddr + CSR14)); | |
188 | ||
189 | /* If NWay finished and we have a negotiated partner capability. | |
190 | * check bits 14:12 for bit pattern 101 - all is good | |
191 | */ | |
192 | if (tp->nway && !tp->nwayset) { | |
193 | ||
194 | /* we did an auto negotiation */ | |
195 | ||
196 | if ((csr12 & 0x7000) == 0x5000) { | |
197 | ||
198 | /* negotiation ended successfully */ | |
199 | ||
200 | /* get the link partners reply and mask out all but | |
7f927fcc | 201 | * bits 24-21 which show the partners capabilities |
1da177e4 LT |
202 | * and match those to what we advertised |
203 | * | |
204 | * then begin to interpret the results of the negotiation. | |
205 | * Always go in this order : (we are ignoring T4 for now) | |
206 | * 100baseTx-FD, 100baseTx-HD, 10baseT-FD, 10baseT-HD | |
207 | */ | |
208 | ||
209 | int negotiated = ((csr12 >> 16) & 0x01E0) & tp->sym_advertise; | |
210 | tp->lpar = (csr12 >> 16); | |
211 | tp->nwayset = 1; | |
212 | ||
213 | if (negotiated & 0x0100) dev->if_port = 5; | |
214 | else if (negotiated & 0x0080) dev->if_port = 3; | |
215 | else if (negotiated & 0x0040) dev->if_port = 4; | |
216 | else if (negotiated & 0x0020) dev->if_port = 0; | |
217 | else { | |
218 | if (tulip_debug > 1) | |
219 | printk(KERN_INFO "%s: funny autonegotiate result " | |
220 | "csr12 %8.8x advertising %4.4x\n", | |
221 | dev->name, csr12, tp->sym_advertise); | |
222 | tp->nwayset = 0; | |
223 | /* so check if 100baseTx link state is okay */ | |
224 | if ((csr12 & 2) == 0 && (tp->sym_advertise & 0x0180)) | |
225 | dev->if_port = 3; | |
226 | } | |
227 | ||
228 | /* now record the duplex that was negotiated */ | |
229 | tp->full_duplex = 0; | |
230 | if ((dev->if_port == 4) || (dev->if_port == 5)) | |
231 | tp->full_duplex = 1; | |
232 | ||
233 | if (tulip_debug > 1) { | |
234 | if (tp->nwayset) | |
235 | printk(KERN_INFO "%s: Switching to %s based on link " | |
236 | "negotiation %4.4x & %4.4x = %4.4x.\n", | |
237 | dev->name, medianame[dev->if_port], | |
238 | tp->sym_advertise, tp->lpar, negotiated); | |
239 | } | |
240 | ||
241 | /* remember to turn off bit 7 - autonegotiate | |
242 | * enable so we can properly end nway mode and | |
243 | * set duplex (ie. use csr6<9> again) | |
244 | */ | |
245 | csr14 = (ioread32(ioaddr + CSR14) & 0xffffff7f); | |
246 | iowrite32(csr14,ioaddr + CSR14); | |
247 | ||
248 | ||
249 | /* now set the data port and operating mode | |
250 | * (see the Data Port Selection comments at | |
251 | * the top of the file | |
252 | */ | |
253 | ||
254 | /* get current csr6 and mask off bits not to touch */ | |
255 | /* see comment at top of file */ | |
256 | ||
257 | tp->csr6 = (ioread32(ioaddr + CSR6) & 0xfe3bd1fd); | |
258 | ||
259 | /* so if using if_port 3 or 5 then select the 100baseT | |
260 | * port else select the 10baseT port. | |
261 | * See the Data Port Selection table at the top | |
262 | * of the file which was taken from the PNIC_II.PDF | |
263 | * datasheet | |
264 | */ | |
265 | if (dev->if_port & 1) tp->csr6 |= 0x01840000; | |
266 | else tp->csr6 |= 0x00400000; | |
267 | ||
268 | /* now set the full duplex bit appropriately */ | |
269 | if (tp->full_duplex) tp->csr6 |= 0x00000200; | |
270 | ||
271 | iowrite32(1, ioaddr + CSR13); | |
272 | ||
273 | if (tulip_debug > 2) | |
274 | printk(KERN_DEBUG "%s: Setting CSR6 %8.8x/%x CSR12 " | |
275 | "%8.8x.\n", dev->name, tp->csr6, | |
276 | ioread32(ioaddr + CSR6), ioread32(ioaddr + CSR12)); | |
277 | ||
278 | /* now the following actually writes out the | |
279 | * new csr6 values | |
280 | */ | |
281 | tulip_start_rxtx(tp); | |
282 | ||
283 | return; | |
284 | ||
285 | } else { | |
286 | printk(KERN_INFO "%s: Autonegotiation failed, " | |
287 | "using %s, link beat status %4.4x.\n", | |
288 | dev->name, medianame[dev->if_port], csr12); | |
289 | ||
290 | /* remember to turn off bit 7 - autonegotiate | |
291 | * enable so we don't forget | |
292 | */ | |
293 | csr14 = (ioread32(ioaddr + CSR14) & 0xffffff7f); | |
294 | iowrite32(csr14,ioaddr + CSR14); | |
295 | ||
296 | /* what should we do when autonegotiate fails? | |
297 | * should we try again or default to baseline | |
298 | * case. I just don't know. | |
299 | * | |
300 | * for now default to some baseline case | |
301 | */ | |
302 | ||
303 | dev->if_port = 0; | |
304 | tp->nway = 0; | |
305 | tp->nwayset = 1; | |
306 | ||
307 | /* set to 10baseTx-HD - see Data Port Selection | |
308 | * comment given at the top of the file | |
309 | */ | |
310 | tp->csr6 = (ioread32(ioaddr + CSR6) & 0xfe3bd1fd); | |
311 | tp->csr6 |= 0x00400000; | |
312 | ||
313 | tulip_restart_rxtx(tp); | |
314 | ||
315 | return; | |
316 | ||
317 | } | |
318 | } | |
319 | ||
320 | if ((tp->nwayset && (csr5 & 0x08000000) | |
321 | && (dev->if_port == 3 || dev->if_port == 5) | |
322 | && (csr12 & 2) == 2) || (tp->nway && (csr5 & (TPLnkFail)))) { | |
323 | ||
324 | /* Link blew? Maybe restart NWay. */ | |
325 | ||
326 | if (tulip_debug > 2) | |
327 | printk(KERN_DEBUG "%s: Ugh! Link blew?\n", dev->name); | |
328 | ||
329 | del_timer_sync(&tp->timer); | |
330 | pnic2_start_nway(dev); | |
331 | tp->timer.expires = RUN_AT(3*HZ); | |
332 | add_timer(&tp->timer); | |
333 | ||
334 | return; | |
335 | } | |
336 | ||
337 | ||
338 | if (dev->if_port == 3 || dev->if_port == 5) { | |
339 | ||
340 | /* we are at 100mb and a potential link change occurred */ | |
341 | ||
342 | if (tulip_debug > 1) | |
343 | printk(KERN_INFO"%s: PNIC2 %s link beat %s.\n", | |
344 | dev->name, medianame[dev->if_port], | |
345 | (csr12 & 2) ? "failed" : "good"); | |
346 | ||
347 | /* check 100 link beat */ | |
348 | ||
349 | tp->nway = 0; | |
350 | tp->nwayset = 1; | |
351 | ||
352 | /* if failed then try doing an nway to get in sync */ | |
353 | if ((csr12 & 2) && ! tp->medialock) { | |
354 | del_timer_sync(&tp->timer); | |
355 | pnic2_start_nway(dev); | |
356 | tp->timer.expires = RUN_AT(3*HZ); | |
357 | add_timer(&tp->timer); | |
358 | } | |
359 | ||
360 | return; | |
361 | } | |
362 | ||
363 | if (dev->if_port == 0 || dev->if_port == 4) { | |
364 | ||
365 | /* we are at 10mb and a potential link change occurred */ | |
366 | ||
367 | if (tulip_debug > 1) | |
368 | printk(KERN_INFO"%s: PNIC2 %s link beat %s.\n", | |
369 | dev->name, medianame[dev->if_port], | |
370 | (csr12 & 4) ? "failed" : "good"); | |
371 | ||
372 | ||
373 | tp->nway = 0; | |
374 | tp->nwayset = 1; | |
375 | ||
376 | /* if failed, try doing an nway to get in sync */ | |
377 | if ((csr12 & 4) && ! tp->medialock) { | |
378 | del_timer_sync(&tp->timer); | |
379 | pnic2_start_nway(dev); | |
380 | tp->timer.expires = RUN_AT(3*HZ); | |
381 | add_timer(&tp->timer); | |
382 | } | |
383 | ||
384 | return; | |
385 | } | |
386 | ||
387 | ||
388 | if (tulip_debug > 1) | |
389 | printk(KERN_INFO"%s: PNIC2 Link Change Default?\n",dev->name); | |
390 | ||
391 | /* if all else fails default to trying 10baseT-HD */ | |
392 | dev->if_port = 0; | |
393 | ||
394 | /* make sure autonegotiate enable is off */ | |
395 | csr14 = (ioread32(ioaddr + CSR14) & 0xffffff7f); | |
396 | iowrite32(csr14,ioaddr + CSR14); | |
397 | ||
398 | /* set to 10baseTx-HD - see Data Port Selection | |
399 | * comment given at the top of the file | |
400 | */ | |
401 | tp->csr6 = (ioread32(ioaddr + CSR6) & 0xfe3bd1fd); | |
402 | tp->csr6 |= 0x00400000; | |
403 | ||
404 | tulip_restart_rxtx(tp); | |
405 | } | |
406 |