Commit | Line | Data |
---|---|---|
2e55cc72 DB |
1 | /* |
2 | * ASIX AX8817X based USB 2.0 Ethernet Devices | |
933a27d3 | 3 | * Copyright (C) 2003-2006 David Hollis <dhollis@davehollis.com> |
2e55cc72 | 4 | * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net> |
933a27d3 | 5 | * Copyright (C) 2006 James Painter <jamie.painter@iname.com> |
2e55cc72 DB |
6 | * Copyright (c) 2002-2003 TiVo Inc. |
7 | * | |
8 | * This program is free software; you can redistribute it and/or modify | |
9 | * it under the terms of the GNU General Public License as published by | |
10 | * the Free Software Foundation; either version 2 of the License, or | |
11 | * (at your option) any later version. | |
12 | * | |
13 | * This program is distributed in the hope that it will be useful, | |
14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
16 | * GNU General Public License for more details. | |
17 | * | |
18 | * You should have received a copy of the GNU General Public License | |
9cb00073 | 19 | * along with this program; if not, see <http://www.gnu.org/licenses/>. |
2e55cc72 DB |
20 | */ |
21 | ||
607740bc | 22 | #include "asix.h" |
933a27d3 DH |
23 | |
24 | #define PHY_MODE_MARVELL 0x0000 | |
25 | #define MII_MARVELL_LED_CTRL 0x0018 | |
26 | #define MII_MARVELL_STATUS 0x001b | |
27 | #define MII_MARVELL_CTRL 0x0014 | |
28 | ||
29 | #define MARVELL_LED_MANUAL 0x0019 | |
30 | ||
31 | #define MARVELL_STATUS_HWCFG 0x0004 | |
32 | ||
33 | #define MARVELL_CTRL_TXDELAY 0x0002 | |
34 | #define MARVELL_CTRL_RXDELAY 0x0080 | |
2e55cc72 | 35 | |
3486140e | 36 | #define PHY_MODE_RTL8211CL 0x000C |
610d885d | 37 | |
2e55cc72 | 38 | struct ax88172_int_data { |
51bf2976 | 39 | __le16 res1; |
2e55cc72 | 40 | u8 link; |
51bf2976 | 41 | __le16 res2; |
2e55cc72 | 42 | u8 status; |
51bf2976 | 43 | __le16 res3; |
ba2d3587 | 44 | } __packed; |
2e55cc72 | 45 | |
933a27d3 DH |
46 | static void asix_status(struct usbnet *dev, struct urb *urb) |
47 | { | |
48 | struct ax88172_int_data *event; | |
49 | int link; | |
50 | ||
51 | if (urb->actual_length < 8) | |
52 | return; | |
53 | ||
54 | event = urb->transfer_buffer; | |
55 | link = event->link & 0x01; | |
56 | if (netif_carrier_ok(dev->net) != link) { | |
eae65919 | 57 | usbnet_link_change(dev, link, 1); |
60b86755 | 58 | netdev_dbg(dev->net, "Link Status is: %d\n", link); |
933a27d3 DH |
59 | } |
60 | } | |
61 | ||
452b5ecd JCPV |
62 | static void asix_set_netdev_dev_addr(struct usbnet *dev, u8 *addr) |
63 | { | |
64 | if (is_valid_ether_addr(addr)) { | |
65 | memcpy(dev->net->dev_addr, addr, ETH_ALEN); | |
66 | } else { | |
67 | netdev_info(dev->net, "invalid hw address, using random\n"); | |
68 | eth_hw_addr_random(dev->net); | |
69 | } | |
70 | } | |
71 | ||
933a27d3 DH |
72 | /* Get the PHY Identifier from the PHYSID1 & PHYSID2 MII registers */ |
73 | static u32 asix_get_phyid(struct usbnet *dev) | |
2e55cc72 | 74 | { |
933a27d3 DH |
75 | int phy_reg; |
76 | u32 phy_id; | |
a77929a2 | 77 | int i; |
2e55cc72 | 78 | |
a77929a2 GG |
79 | /* Poll for the rare case the FW or phy isn't ready yet. */ |
80 | for (i = 0; i < 100; i++) { | |
81 | phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID1); | |
82 | if (phy_reg != 0 && phy_reg != 0xFFFF) | |
83 | break; | |
84 | mdelay(1); | |
85 | } | |
86 | ||
87 | if (phy_reg <= 0 || phy_reg == 0xFFFF) | |
933a27d3 | 88 | return 0; |
2e55cc72 | 89 | |
933a27d3 | 90 | phy_id = (phy_reg & 0xffff) << 16; |
2e55cc72 | 91 | |
933a27d3 DH |
92 | phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID2); |
93 | if (phy_reg < 0) | |
94 | return 0; | |
95 | ||
96 | phy_id |= (phy_reg & 0xffff); | |
97 | ||
98 | return phy_id; | |
2e55cc72 DB |
99 | } |
100 | ||
933a27d3 DH |
101 | static u32 asix_get_link(struct net_device *net) |
102 | { | |
103 | struct usbnet *dev = netdev_priv(net); | |
104 | ||
105 | return mii_link_ok(&dev->mii); | |
106 | } | |
107 | ||
108 | static int asix_ioctl (struct net_device *net, struct ifreq *rq, int cmd) | |
109 | { | |
110 | struct usbnet *dev = netdev_priv(net); | |
111 | ||
112 | return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL); | |
113 | } | |
114 | ||
115 | /* We need to override some ethtool_ops so we require our | |
116 | own structure so we don't interfere with other usbnet | |
117 | devices that may be connected at the same time. */ | |
0fc0b732 | 118 | static const struct ethtool_ops ax88172_ethtool_ops = { |
933a27d3 DH |
119 | .get_drvinfo = asix_get_drvinfo, |
120 | .get_link = asix_get_link, | |
933a27d3 | 121 | .get_msglevel = usbnet_get_msglevel, |
2e55cc72 | 122 | .set_msglevel = usbnet_set_msglevel, |
48b1be6a DH |
123 | .get_wol = asix_get_wol, |
124 | .set_wol = asix_set_wol, | |
125 | .get_eeprom_len = asix_get_eeprom_len, | |
126 | .get_eeprom = asix_get_eeprom, | |
cb7b24cd | 127 | .set_eeprom = asix_set_eeprom, |
c41286fd AB |
128 | .get_settings = usbnet_get_settings, |
129 | .set_settings = usbnet_set_settings, | |
130 | .nway_reset = usbnet_nway_reset, | |
2e55cc72 DB |
131 | }; |
132 | ||
933a27d3 | 133 | static void ax88172_set_multicast(struct net_device *net) |
2e55cc72 DB |
134 | { |
135 | struct usbnet *dev = netdev_priv(net); | |
933a27d3 DH |
136 | struct asix_data *data = (struct asix_data *)&dev->data; |
137 | u8 rx_ctl = 0x8c; | |
2e55cc72 | 138 | |
933a27d3 DH |
139 | if (net->flags & IFF_PROMISC) { |
140 | rx_ctl |= 0x01; | |
8e95a202 | 141 | } else if (net->flags & IFF_ALLMULTI || |
4cd24eaf | 142 | netdev_mc_count(net) > AX_MAX_MCAST) { |
933a27d3 | 143 | rx_ctl |= 0x02; |
4cd24eaf | 144 | } else if (netdev_mc_empty(net)) { |
933a27d3 DH |
145 | /* just broadcast and directed */ |
146 | } else { | |
147 | /* We use the 20 byte dev->data | |
148 | * for our 8 byte filter buffer | |
149 | * to avoid allocating memory that | |
150 | * is tricky to free later */ | |
22bedad3 | 151 | struct netdev_hw_addr *ha; |
933a27d3 | 152 | u32 crc_bits; |
933a27d3 DH |
153 | |
154 | memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE); | |
155 | ||
156 | /* Build the multicast hash filter. */ | |
22bedad3 JP |
157 | netdev_for_each_mc_addr(ha, net) { |
158 | crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26; | |
933a27d3 DH |
159 | data->multi_filter[crc_bits >> 3] |= |
160 | 1 << (crc_bits & 7); | |
933a27d3 DH |
161 | } |
162 | ||
163 | asix_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0, | |
164 | AX_MCAST_FILTER_SIZE, data->multi_filter); | |
165 | ||
166 | rx_ctl |= 0x10; | |
167 | } | |
168 | ||
169 | asix_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL); | |
170 | } | |
171 | ||
172 | static int ax88172_link_reset(struct usbnet *dev) | |
173 | { | |
174 | u8 mode; | |
8ae6daca | 175 | struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET }; |
933a27d3 DH |
176 | |
177 | mii_check_media(&dev->mii, 1, 1); | |
178 | mii_ethtool_gset(&dev->mii, &ecmd); | |
179 | mode = AX88172_MEDIUM_DEFAULT; | |
180 | ||
181 | if (ecmd.duplex != DUPLEX_FULL) | |
182 | mode |= ~AX88172_MEDIUM_FD; | |
183 | ||
8ae6daca DD |
184 | netdev_dbg(dev->net, "ax88172_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n", |
185 | ethtool_cmd_speed(&ecmd), ecmd.duplex, mode); | |
933a27d3 DH |
186 | |
187 | asix_write_medium_mode(dev, mode); | |
188 | ||
189 | return 0; | |
2e55cc72 DB |
190 | } |
191 | ||
1703338c SH |
192 | static const struct net_device_ops ax88172_netdev_ops = { |
193 | .ndo_open = usbnet_open, | |
194 | .ndo_stop = usbnet_stop, | |
195 | .ndo_start_xmit = usbnet_start_xmit, | |
196 | .ndo_tx_timeout = usbnet_tx_timeout, | |
197 | .ndo_change_mtu = usbnet_change_mtu, | |
198 | .ndo_set_mac_address = eth_mac_addr, | |
199 | .ndo_validate_addr = eth_validate_addr, | |
200 | .ndo_do_ioctl = asix_ioctl, | |
afc4b13d | 201 | .ndo_set_rx_mode = ax88172_set_multicast, |
1703338c SH |
202 | }; |
203 | ||
48b1be6a | 204 | static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf) |
2e55cc72 DB |
205 | { |
206 | int ret = 0; | |
51bf2976 | 207 | u8 buf[ETH_ALEN]; |
2e55cc72 DB |
208 | int i; |
209 | unsigned long gpio_bits = dev->driver_info->data; | |
210 | ||
211 | usbnet_get_endpoints(dev,intf); | |
212 | ||
2e55cc72 DB |
213 | /* Toggle the GPIOs in a manufacturer/model specific way */ |
214 | for (i = 2; i >= 0; i--) { | |
83e1b918 GG |
215 | ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS, |
216 | (gpio_bits >> (i * 8)) & 0xff, 0, 0, NULL); | |
217 | if (ret < 0) | |
51bf2976 | 218 | goto out; |
2e55cc72 DB |
219 | msleep(5); |
220 | } | |
221 | ||
83e1b918 GG |
222 | ret = asix_write_rx_ctl(dev, 0x80); |
223 | if (ret < 0) | |
51bf2976 | 224 | goto out; |
2e55cc72 DB |
225 | |
226 | /* Get the MAC address */ | |
83e1b918 GG |
227 | ret = asix_read_cmd(dev, AX88172_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf); |
228 | if (ret < 0) { | |
49ae25b0 GKH |
229 | netdev_dbg(dev->net, "read AX_CMD_READ_NODE_ID failed: %d\n", |
230 | ret); | |
51bf2976 | 231 | goto out; |
2e55cc72 | 232 | } |
452b5ecd JCPV |
233 | |
234 | asix_set_netdev_dev_addr(dev, buf); | |
2e55cc72 | 235 | |
2e55cc72 DB |
236 | /* Initialize MII structure */ |
237 | dev->mii.dev = dev->net; | |
48b1be6a DH |
238 | dev->mii.mdio_read = asix_mdio_read; |
239 | dev->mii.mdio_write = asix_mdio_write; | |
2e55cc72 DB |
240 | dev->mii.phy_id_mask = 0x3f; |
241 | dev->mii.reg_num_mask = 0x1f; | |
933a27d3 | 242 | dev->mii.phy_id = asix_get_phy_addr(dev); |
2e55cc72 | 243 | |
1703338c | 244 | dev->net->netdev_ops = &ax88172_netdev_ops; |
48b1be6a | 245 | dev->net->ethtool_ops = &ax88172_ethtool_ops; |
95162d65 ED |
246 | dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */ |
247 | dev->net->needed_tailroom = 4; /* cf asix_tx_fixup() */ | |
2e55cc72 | 248 | |
933a27d3 DH |
249 | asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET); |
250 | asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, | |
2e55cc72 DB |
251 | ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP); |
252 | mii_nway_restart(&dev->mii); | |
253 | ||
254 | return 0; | |
51bf2976 AV |
255 | |
256 | out: | |
2e55cc72 DB |
257 | return ret; |
258 | } | |
259 | ||
0fc0b732 | 260 | static const struct ethtool_ops ax88772_ethtool_ops = { |
48b1be6a | 261 | .get_drvinfo = asix_get_drvinfo, |
933a27d3 | 262 | .get_link = asix_get_link, |
2e55cc72 DB |
263 | .get_msglevel = usbnet_get_msglevel, |
264 | .set_msglevel = usbnet_set_msglevel, | |
48b1be6a DH |
265 | .get_wol = asix_get_wol, |
266 | .set_wol = asix_set_wol, | |
267 | .get_eeprom_len = asix_get_eeprom_len, | |
268 | .get_eeprom = asix_get_eeprom, | |
cb7b24cd | 269 | .set_eeprom = asix_set_eeprom, |
c41286fd AB |
270 | .get_settings = usbnet_get_settings, |
271 | .set_settings = usbnet_set_settings, | |
272 | .nway_reset = usbnet_nway_reset, | |
2e55cc72 DB |
273 | }; |
274 | ||
933a27d3 DH |
275 | static int ax88772_link_reset(struct usbnet *dev) |
276 | { | |
277 | u16 mode; | |
8ae6daca | 278 | struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET }; |
933a27d3 DH |
279 | |
280 | mii_check_media(&dev->mii, 1, 1); | |
281 | mii_ethtool_gset(&dev->mii, &ecmd); | |
282 | mode = AX88772_MEDIUM_DEFAULT; | |
283 | ||
8ae6daca | 284 | if (ethtool_cmd_speed(&ecmd) != SPEED_100) |
933a27d3 DH |
285 | mode &= ~AX_MEDIUM_PS; |
286 | ||
287 | if (ecmd.duplex != DUPLEX_FULL) | |
288 | mode &= ~AX_MEDIUM_FD; | |
289 | ||
8ae6daca DD |
290 | netdev_dbg(dev->net, "ax88772_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n", |
291 | ethtool_cmd_speed(&ecmd), ecmd.duplex, mode); | |
933a27d3 DH |
292 | |
293 | asix_write_medium_mode(dev, mode); | |
294 | ||
295 | return 0; | |
296 | } | |
297 | ||
4ad1438f | 298 | static int ax88772_reset(struct usbnet *dev) |
2e55cc72 | 299 | { |
8ef66bdc | 300 | struct asix_data *data = (struct asix_data *)&dev->data; |
d0ffff8f | 301 | int ret, embd_phy; |
933a27d3 | 302 | u16 rx_ctl; |
2e55cc72 | 303 | |
83e1b918 GG |
304 | ret = asix_write_gpio(dev, |
305 | AX_GPIO_RSE | AX_GPIO_GPO_2 | AX_GPIO_GPO2EN, 5); | |
306 | if (ret < 0) | |
51bf2976 | 307 | goto out; |
2e55cc72 | 308 | |
d0ffff8f | 309 | embd_phy = ((asix_get_phy_addr(dev) & 0x1f) == 0x10 ? 1 : 0); |
4ad1438f | 310 | |
83e1b918 GG |
311 | ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL); |
312 | if (ret < 0) { | |
49ae25b0 | 313 | netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret); |
51bf2976 | 314 | goto out; |
2e55cc72 DB |
315 | } |
316 | ||
83e1b918 GG |
317 | ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL); |
318 | if (ret < 0) | |
51bf2976 | 319 | goto out; |
2e55cc72 DB |
320 | |
321 | msleep(150); | |
83e1b918 GG |
322 | |
323 | ret = asix_sw_reset(dev, AX_SWRESET_CLEAR); | |
324 | if (ret < 0) | |
51bf2976 | 325 | goto out; |
2e55cc72 DB |
326 | |
327 | msleep(150); | |
4ad1438f | 328 | |
d0ffff8f | 329 | if (embd_phy) { |
83e1b918 GG |
330 | ret = asix_sw_reset(dev, AX_SWRESET_IPRL); |
331 | if (ret < 0) | |
51bf2976 | 332 | goto out; |
83e1b918 GG |
333 | } else { |
334 | ret = asix_sw_reset(dev, AX_SWRESET_PRTE); | |
335 | if (ret < 0) | |
51bf2976 | 336 | goto out; |
d0ffff8f | 337 | } |
2e55cc72 DB |
338 | |
339 | msleep(150); | |
933a27d3 | 340 | rx_ctl = asix_read_rx_ctl(dev); |
49ae25b0 | 341 | netdev_dbg(dev->net, "RX_CTL is 0x%04x after software reset\n", rx_ctl); |
83e1b918 GG |
342 | ret = asix_write_rx_ctl(dev, 0x0000); |
343 | if (ret < 0) | |
51bf2976 | 344 | goto out; |
2e55cc72 | 345 | |
933a27d3 | 346 | rx_ctl = asix_read_rx_ctl(dev); |
49ae25b0 | 347 | netdev_dbg(dev->net, "RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl); |
933a27d3 | 348 | |
83e1b918 GG |
349 | ret = asix_sw_reset(dev, AX_SWRESET_PRL); |
350 | if (ret < 0) | |
51bf2976 | 351 | goto out; |
2e55cc72 | 352 | |
2e55cc72 | 353 | msleep(150); |
48b1be6a | 354 | |
83e1b918 GG |
355 | ret = asix_sw_reset(dev, AX_SWRESET_IPRL | AX_SWRESET_PRL); |
356 | if (ret < 0) | |
51bf2976 | 357 | goto out; |
2e55cc72 | 358 | |
48b1be6a | 359 | msleep(150); |
2e55cc72 | 360 | |
933a27d3 DH |
361 | asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET); |
362 | asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, | |
2e55cc72 DB |
363 | ADVERTISE_ALL | ADVERTISE_CSMA); |
364 | mii_nway_restart(&dev->mii); | |
365 | ||
83e1b918 GG |
366 | ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT); |
367 | if (ret < 0) | |
51bf2976 | 368 | goto out; |
2e55cc72 | 369 | |
83e1b918 | 370 | ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0, |
2e55cc72 | 371 | AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT, |
83e1b918 GG |
372 | AX88772_IPG2_DEFAULT, 0, NULL); |
373 | if (ret < 0) { | |
49ae25b0 | 374 | netdev_dbg(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret); |
51bf2976 | 375 | goto out; |
2e55cc72 | 376 | } |
2e55cc72 | 377 | |
8ef66bdc JK |
378 | /* Rewrite MAC address */ |
379 | memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN); | |
380 | ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN, | |
381 | data->mac_addr); | |
382 | if (ret < 0) | |
383 | goto out; | |
384 | ||
2e55cc72 | 385 | /* Set RX_CTL to default values with 2k buffer, and enable cactus */ |
83e1b918 GG |
386 | ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL); |
387 | if (ret < 0) | |
51bf2976 | 388 | goto out; |
2e55cc72 | 389 | |
933a27d3 | 390 | rx_ctl = asix_read_rx_ctl(dev); |
49ae25b0 GKH |
391 | netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n", |
392 | rx_ctl); | |
933a27d3 DH |
393 | |
394 | rx_ctl = asix_read_medium_status(dev); | |
49ae25b0 GKH |
395 | netdev_dbg(dev->net, |
396 | "Medium Status is 0x%04x after all initializations\n", | |
397 | rx_ctl); | |
933a27d3 | 398 | |
4ad1438f GG |
399 | return 0; |
400 | ||
401 | out: | |
402 | return ret; | |
403 | ||
404 | } | |
405 | ||
406 | static const struct net_device_ops ax88772_netdev_ops = { | |
407 | .ndo_open = usbnet_open, | |
408 | .ndo_stop = usbnet_stop, | |
409 | .ndo_start_xmit = usbnet_start_xmit, | |
410 | .ndo_tx_timeout = usbnet_tx_timeout, | |
411 | .ndo_change_mtu = usbnet_change_mtu, | |
412 | .ndo_set_mac_address = asix_set_mac_address, | |
413 | .ndo_validate_addr = eth_validate_addr, | |
414 | .ndo_do_ioctl = asix_ioctl, | |
415 | .ndo_set_rx_mode = asix_set_multicast, | |
416 | }; | |
417 | ||
418 | static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) | |
419 | { | |
5620df65 | 420 | int ret, embd_phy, i; |
4ad1438f GG |
421 | u8 buf[ETH_ALEN]; |
422 | u32 phyid; | |
423 | ||
4ad1438f GG |
424 | usbnet_get_endpoints(dev,intf); |
425 | ||
426 | /* Get the MAC address */ | |
5620df65 LS |
427 | if (dev->driver_info->data & FLAG_EEPROM_MAC) { |
428 | for (i = 0; i < (ETH_ALEN >> 1); i++) { | |
429 | ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x04 + i, | |
430 | 0, 2, buf + i * 2); | |
431 | if (ret < 0) | |
432 | break; | |
433 | } | |
434 | } else { | |
435 | ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, | |
436 | 0, 0, ETH_ALEN, buf); | |
437 | } | |
438 | ||
83e1b918 | 439 | if (ret < 0) { |
49ae25b0 | 440 | netdev_dbg(dev->net, "Failed to read MAC address: %d\n", ret); |
83e1b918 | 441 | return ret; |
4ad1438f | 442 | } |
452b5ecd JCPV |
443 | |
444 | asix_set_netdev_dev_addr(dev, buf); | |
4ad1438f GG |
445 | |
446 | /* Initialize MII structure */ | |
447 | dev->mii.dev = dev->net; | |
448 | dev->mii.mdio_read = asix_mdio_read; | |
449 | dev->mii.mdio_write = asix_mdio_write; | |
450 | dev->mii.phy_id_mask = 0x1f; | |
451 | dev->mii.reg_num_mask = 0x1f; | |
452 | dev->mii.phy_id = asix_get_phy_addr(dev); | |
453 | ||
4ad1438f GG |
454 | dev->net->netdev_ops = &ax88772_netdev_ops; |
455 | dev->net->ethtool_ops = &ax88772_ethtool_ops; | |
95162d65 ED |
456 | dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */ |
457 | dev->net->needed_tailroom = 4; /* cf asix_tx_fixup() */ | |
4ad1438f | 458 | |
d3665188 GG |
459 | embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0); |
460 | ||
461 | /* Reset the PHY to normal operation mode */ | |
462 | ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL); | |
463 | if (ret < 0) { | |
49ae25b0 | 464 | netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret); |
d3665188 GG |
465 | return ret; |
466 | } | |
467 | ||
436c2a50 | 468 | ax88772_reset(dev); |
d3665188 GG |
469 | |
470 | /* Read PHYID register *AFTER* the PHY was reset properly */ | |
471 | phyid = asix_get_phyid(dev); | |
49ae25b0 | 472 | netdev_dbg(dev->net, "PHYID=0x%08x\n", phyid); |
d3665188 | 473 | |
2e55cc72 DB |
474 | /* Asix framing packs multiple eth frames into a 2K usb bulk transfer */ |
475 | if (dev->driver_info->flags & FLAG_FRAMING_AX) { | |
476 | /* hard_mtu is still the default - the device does not support | |
477 | jumbo eth frames */ | |
478 | dev->rx_urb_size = 2048; | |
479 | } | |
83e1b918 | 480 | |
8b5b6f54 LS |
481 | dev->driver_priv = kzalloc(sizeof(struct asix_common_private), GFP_KERNEL); |
482 | if (!dev->driver_priv) | |
483 | return -ENOMEM; | |
484 | ||
2e55cc72 | 485 | return 0; |
2e55cc72 DB |
486 | } |
487 | ||
ad327910 | 488 | static void ax88772_unbind(struct usbnet *dev, struct usb_interface *intf) |
8b5b6f54 | 489 | { |
91ecee68 | 490 | kfree(dev->driver_priv); |
8b5b6f54 LS |
491 | } |
492 | ||
bc689c97 | 493 | static const struct ethtool_ops ax88178_ethtool_ops = { |
933a27d3 DH |
494 | .get_drvinfo = asix_get_drvinfo, |
495 | .get_link = asix_get_link, | |
933a27d3 DH |
496 | .get_msglevel = usbnet_get_msglevel, |
497 | .set_msglevel = usbnet_set_msglevel, | |
498 | .get_wol = asix_get_wol, | |
499 | .set_wol = asix_set_wol, | |
500 | .get_eeprom_len = asix_get_eeprom_len, | |
501 | .get_eeprom = asix_get_eeprom, | |
cb7b24cd | 502 | .set_eeprom = asix_set_eeprom, |
c41286fd AB |
503 | .get_settings = usbnet_get_settings, |
504 | .set_settings = usbnet_set_settings, | |
505 | .nway_reset = usbnet_nway_reset, | |
933a27d3 DH |
506 | }; |
507 | ||
508 | static int marvell_phy_init(struct usbnet *dev) | |
2e55cc72 | 509 | { |
933a27d3 DH |
510 | struct asix_data *data = (struct asix_data *)&dev->data; |
511 | u16 reg; | |
2e55cc72 | 512 | |
60b86755 | 513 | netdev_dbg(dev->net, "marvell_phy_init()\n"); |
2e55cc72 | 514 | |
933a27d3 | 515 | reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_MARVELL_STATUS); |
60b86755 | 516 | netdev_dbg(dev->net, "MII_MARVELL_STATUS = 0x%04x\n", reg); |
2e55cc72 | 517 | |
933a27d3 DH |
518 | asix_mdio_write(dev->net, dev->mii.phy_id, MII_MARVELL_CTRL, |
519 | MARVELL_CTRL_RXDELAY | MARVELL_CTRL_TXDELAY); | |
2e55cc72 | 520 | |
933a27d3 DH |
521 | if (data->ledmode) { |
522 | reg = asix_mdio_read(dev->net, dev->mii.phy_id, | |
523 | MII_MARVELL_LED_CTRL); | |
60b86755 | 524 | netdev_dbg(dev->net, "MII_MARVELL_LED_CTRL (1) = 0x%04x\n", reg); |
2e55cc72 | 525 | |
933a27d3 DH |
526 | reg &= 0xf8ff; |
527 | reg |= (1 + 0x0100); | |
528 | asix_mdio_write(dev->net, dev->mii.phy_id, | |
529 | MII_MARVELL_LED_CTRL, reg); | |
2e55cc72 | 530 | |
933a27d3 DH |
531 | reg = asix_mdio_read(dev->net, dev->mii.phy_id, |
532 | MII_MARVELL_LED_CTRL); | |
60b86755 | 533 | netdev_dbg(dev->net, "MII_MARVELL_LED_CTRL (2) = 0x%04x\n", reg); |
933a27d3 DH |
534 | reg &= 0xfc0f; |
535 | } | |
2e55cc72 | 536 | |
933a27d3 DH |
537 | return 0; |
538 | } | |
539 | ||
610d885d GG |
540 | static int rtl8211cl_phy_init(struct usbnet *dev) |
541 | { | |
542 | struct asix_data *data = (struct asix_data *)&dev->data; | |
543 | ||
544 | netdev_dbg(dev->net, "rtl8211cl_phy_init()\n"); | |
545 | ||
546 | asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0x0005); | |
547 | asix_mdio_write (dev->net, dev->mii.phy_id, 0x0c, 0); | |
548 | asix_mdio_write (dev->net, dev->mii.phy_id, 0x01, | |
549 | asix_mdio_read (dev->net, dev->mii.phy_id, 0x01) | 0x0080); | |
550 | asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0); | |
551 | ||
552 | if (data->ledmode == 12) { | |
553 | asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0x0002); | |
554 | asix_mdio_write (dev->net, dev->mii.phy_id, 0x1a, 0x00cb); | |
555 | asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0); | |
556 | } | |
557 | ||
558 | return 0; | |
559 | } | |
560 | ||
933a27d3 DH |
561 | static int marvell_led_status(struct usbnet *dev, u16 speed) |
562 | { | |
563 | u16 reg = asix_mdio_read(dev->net, dev->mii.phy_id, MARVELL_LED_MANUAL); | |
564 | ||
60b86755 | 565 | netdev_dbg(dev->net, "marvell_led_status() read 0x%04x\n", reg); |
933a27d3 DH |
566 | |
567 | /* Clear out the center LED bits - 0x03F0 */ | |
568 | reg &= 0xfc0f; | |
569 | ||
570 | switch (speed) { | |
571 | case SPEED_1000: | |
572 | reg |= 0x03e0; | |
573 | break; | |
574 | case SPEED_100: | |
575 | reg |= 0x03b0; | |
576 | break; | |
577 | default: | |
578 | reg |= 0x02f0; | |
2e55cc72 DB |
579 | } |
580 | ||
60b86755 | 581 | netdev_dbg(dev->net, "marvell_led_status() writing 0x%04x\n", reg); |
933a27d3 DH |
582 | asix_mdio_write(dev->net, dev->mii.phy_id, MARVELL_LED_MANUAL, reg); |
583 | ||
584 | return 0; | |
585 | } | |
586 | ||
610d885d GG |
587 | static int ax88178_reset(struct usbnet *dev) |
588 | { | |
589 | struct asix_data *data = (struct asix_data *)&dev->data; | |
590 | int ret; | |
591 | __le16 eeprom; | |
592 | u8 status; | |
593 | int gpio0 = 0; | |
b2d3ad29 | 594 | u32 phyid; |
610d885d GG |
595 | |
596 | asix_read_cmd(dev, AX_CMD_READ_GPIOS, 0, 0, 1, &status); | |
49ae25b0 | 597 | netdev_dbg(dev->net, "GPIO Status: 0x%04x\n", status); |
610d885d GG |
598 | |
599 | asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0, 0, 0, NULL); | |
600 | asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x0017, 0, 2, &eeprom); | |
601 | asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0, 0, 0, NULL); | |
602 | ||
49ae25b0 | 603 | netdev_dbg(dev->net, "EEPROM index 0x17 is 0x%04x\n", eeprom); |
610d885d GG |
604 | |
605 | if (eeprom == cpu_to_le16(0xffff)) { | |
606 | data->phymode = PHY_MODE_MARVELL; | |
607 | data->ledmode = 0; | |
608 | gpio0 = 1; | |
609 | } else { | |
b2d3ad29 | 610 | data->phymode = le16_to_cpu(eeprom) & 0x7F; |
610d885d GG |
611 | data->ledmode = le16_to_cpu(eeprom) >> 8; |
612 | gpio0 = (le16_to_cpu(eeprom) & 0x80) ? 0 : 1; | |
613 | } | |
49ae25b0 | 614 | netdev_dbg(dev->net, "GPIO0: %d, PhyMode: %d\n", gpio0, data->phymode); |
610d885d | 615 | |
b2d3ad29 | 616 | /* Power up external GigaPHY through AX88178 GPIO pin */ |
610d885d GG |
617 | asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_1 | AX_GPIO_GPO1EN, 40); |
618 | if ((le16_to_cpu(eeprom) >> 8) != 1) { | |
619 | asix_write_gpio(dev, 0x003c, 30); | |
620 | asix_write_gpio(dev, 0x001c, 300); | |
621 | asix_write_gpio(dev, 0x003c, 30); | |
622 | } else { | |
49ae25b0 | 623 | netdev_dbg(dev->net, "gpio phymode == 1 path\n"); |
610d885d GG |
624 | asix_write_gpio(dev, AX_GPIO_GPO1EN, 30); |
625 | asix_write_gpio(dev, AX_GPIO_GPO1EN | AX_GPIO_GPO_1, 30); | |
626 | } | |
627 | ||
b2d3ad29 GG |
628 | /* Read PHYID register *AFTER* powering up PHY */ |
629 | phyid = asix_get_phyid(dev); | |
49ae25b0 | 630 | netdev_dbg(dev->net, "PHYID=0x%08x\n", phyid); |
b2d3ad29 GG |
631 | |
632 | /* Set AX88178 to enable MII/GMII/RGMII interface for external PHY */ | |
633 | asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, 0, 0, 0, NULL); | |
634 | ||
610d885d GG |
635 | asix_sw_reset(dev, 0); |
636 | msleep(150); | |
637 | ||
638 | asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD); | |
639 | msleep(150); | |
640 | ||
641 | asix_write_rx_ctl(dev, 0); | |
642 | ||
643 | if (data->phymode == PHY_MODE_MARVELL) { | |
644 | marvell_phy_init(dev); | |
645 | msleep(60); | |
646 | } else if (data->phymode == PHY_MODE_RTL8211CL) | |
647 | rtl8211cl_phy_init(dev); | |
648 | ||
649 | asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, | |
650 | BMCR_RESET | BMCR_ANENABLE); | |
651 | asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, | |
652 | ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP); | |
653 | asix_mdio_write(dev->net, dev->mii.phy_id, MII_CTRL1000, | |
654 | ADVERTISE_1000FULL); | |
655 | ||
656 | mii_nway_restart(&dev->mii); | |
657 | ||
83e1b918 GG |
658 | ret = asix_write_medium_mode(dev, AX88178_MEDIUM_DEFAULT); |
659 | if (ret < 0) | |
660 | return ret; | |
610d885d | 661 | |
71bc5d94 JK |
662 | /* Rewrite MAC address */ |
663 | memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN); | |
664 | ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN, | |
665 | data->mac_addr); | |
666 | if (ret < 0) | |
667 | return ret; | |
668 | ||
83e1b918 GG |
669 | ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL); |
670 | if (ret < 0) | |
671 | return ret; | |
610d885d GG |
672 | |
673 | return 0; | |
610d885d GG |
674 | } |
675 | ||
933a27d3 DH |
676 | static int ax88178_link_reset(struct usbnet *dev) |
677 | { | |
678 | u16 mode; | |
8ae6daca | 679 | struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET }; |
933a27d3 | 680 | struct asix_data *data = (struct asix_data *)&dev->data; |
8ae6daca | 681 | u32 speed; |
933a27d3 | 682 | |
60b86755 | 683 | netdev_dbg(dev->net, "ax88178_link_reset()\n"); |
933a27d3 DH |
684 | |
685 | mii_check_media(&dev->mii, 1, 1); | |
686 | mii_ethtool_gset(&dev->mii, &ecmd); | |
687 | mode = AX88178_MEDIUM_DEFAULT; | |
8ae6daca | 688 | speed = ethtool_cmd_speed(&ecmd); |
933a27d3 | 689 | |
8ae6daca | 690 | if (speed == SPEED_1000) |
a7f75c0c | 691 | mode |= AX_MEDIUM_GM; |
8ae6daca | 692 | else if (speed == SPEED_100) |
933a27d3 DH |
693 | mode |= AX_MEDIUM_PS; |
694 | else | |
695 | mode &= ~(AX_MEDIUM_PS | AX_MEDIUM_GM); | |
696 | ||
a7f75c0c PK |
697 | mode |= AX_MEDIUM_ENCK; |
698 | ||
933a27d3 DH |
699 | if (ecmd.duplex == DUPLEX_FULL) |
700 | mode |= AX_MEDIUM_FD; | |
701 | else | |
702 | mode &= ~AX_MEDIUM_FD; | |
703 | ||
8ae6daca DD |
704 | netdev_dbg(dev->net, "ax88178_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n", |
705 | speed, ecmd.duplex, mode); | |
933a27d3 DH |
706 | |
707 | asix_write_medium_mode(dev, mode); | |
708 | ||
709 | if (data->phymode == PHY_MODE_MARVELL && data->ledmode) | |
8ae6daca | 710 | marvell_led_status(dev, speed); |
933a27d3 DH |
711 | |
712 | return 0; | |
713 | } | |
714 | ||
715 | static void ax88178_set_mfb(struct usbnet *dev) | |
716 | { | |
717 | u16 mfb = AX_RX_CTL_MFB_16384; | |
718 | u16 rxctl; | |
719 | u16 medium; | |
720 | int old_rx_urb_size = dev->rx_urb_size; | |
721 | ||
722 | if (dev->hard_mtu < 2048) { | |
723 | dev->rx_urb_size = 2048; | |
724 | mfb = AX_RX_CTL_MFB_2048; | |
725 | } else if (dev->hard_mtu < 4096) { | |
726 | dev->rx_urb_size = 4096; | |
727 | mfb = AX_RX_CTL_MFB_4096; | |
728 | } else if (dev->hard_mtu < 8192) { | |
729 | dev->rx_urb_size = 8192; | |
730 | mfb = AX_RX_CTL_MFB_8192; | |
731 | } else if (dev->hard_mtu < 16384) { | |
732 | dev->rx_urb_size = 16384; | |
733 | mfb = AX_RX_CTL_MFB_16384; | |
2e55cc72 | 734 | } |
933a27d3 DH |
735 | |
736 | rxctl = asix_read_rx_ctl(dev); | |
737 | asix_write_rx_ctl(dev, (rxctl & ~AX_RX_CTL_MFB_16384) | mfb); | |
738 | ||
739 | medium = asix_read_medium_status(dev); | |
740 | if (dev->net->mtu > 1500) | |
741 | medium |= AX_MEDIUM_JFE; | |
742 | else | |
743 | medium &= ~AX_MEDIUM_JFE; | |
744 | asix_write_medium_mode(dev, medium); | |
745 | ||
746 | if (dev->rx_urb_size > old_rx_urb_size) | |
747 | usbnet_unlink_rx_urbs(dev); | |
2e55cc72 DB |
748 | } |
749 | ||
933a27d3 | 750 | static int ax88178_change_mtu(struct net_device *net, int new_mtu) |
2e55cc72 | 751 | { |
933a27d3 DH |
752 | struct usbnet *dev = netdev_priv(net); |
753 | int ll_mtu = new_mtu + net->hard_header_len + 4; | |
2e55cc72 | 754 | |
60b86755 | 755 | netdev_dbg(dev->net, "ax88178_change_mtu() new_mtu=%d\n", new_mtu); |
2e55cc72 | 756 | |
933a27d3 DH |
757 | if (new_mtu <= 0 || ll_mtu > 16384) |
758 | return -EINVAL; | |
759 | ||
760 | if ((ll_mtu % dev->maxpacket) == 0) | |
761 | return -EDOM; | |
762 | ||
763 | net->mtu = new_mtu; | |
764 | dev->hard_mtu = net->mtu + net->hard_header_len; | |
765 | ax88178_set_mfb(dev); | |
766 | ||
a88c32ae ML |
767 | /* max qlen depend on hard_mtu and rx_urb_size */ |
768 | usbnet_update_max_qlen(dev); | |
769 | ||
933a27d3 DH |
770 | return 0; |
771 | } | |
772 | ||
1703338c SH |
773 | static const struct net_device_ops ax88178_netdev_ops = { |
774 | .ndo_open = usbnet_open, | |
775 | .ndo_stop = usbnet_stop, | |
776 | .ndo_start_xmit = usbnet_start_xmit, | |
777 | .ndo_tx_timeout = usbnet_tx_timeout, | |
7f29a3ba | 778 | .ndo_set_mac_address = asix_set_mac_address, |
1703338c | 779 | .ndo_validate_addr = eth_validate_addr, |
afc4b13d | 780 | .ndo_set_rx_mode = asix_set_multicast, |
1703338c SH |
781 | .ndo_do_ioctl = asix_ioctl, |
782 | .ndo_change_mtu = ax88178_change_mtu, | |
783 | }; | |
784 | ||
933a27d3 DH |
785 | static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf) |
786 | { | |
933a27d3 | 787 | int ret; |
51bf2976 | 788 | u8 buf[ETH_ALEN]; |
933a27d3 DH |
789 | |
790 | usbnet_get_endpoints(dev,intf); | |
791 | ||
933a27d3 | 792 | /* Get the MAC address */ |
83e1b918 GG |
793 | ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf); |
794 | if (ret < 0) { | |
49ae25b0 | 795 | netdev_dbg(dev->net, "Failed to read MAC address: %d\n", ret); |
83e1b918 | 796 | return ret; |
2e55cc72 | 797 | } |
452b5ecd JCPV |
798 | |
799 | asix_set_netdev_dev_addr(dev, buf); | |
2e55cc72 | 800 | |
933a27d3 DH |
801 | /* Initialize MII structure */ |
802 | dev->mii.dev = dev->net; | |
803 | dev->mii.mdio_read = asix_mdio_read; | |
804 | dev->mii.mdio_write = asix_mdio_write; | |
805 | dev->mii.phy_id_mask = 0x1f; | |
806 | dev->mii.reg_num_mask = 0xff; | |
807 | dev->mii.supports_gmii = 1; | |
933a27d3 | 808 | dev->mii.phy_id = asix_get_phy_addr(dev); |
1703338c SH |
809 | |
810 | dev->net->netdev_ops = &ax88178_netdev_ops; | |
933a27d3 | 811 | dev->net->ethtool_ops = &ax88178_ethtool_ops; |
2e55cc72 | 812 | |
b2d3ad29 GG |
813 | /* Blink LEDS so users know driver saw dongle */ |
814 | asix_sw_reset(dev, 0); | |
815 | msleep(150); | |
2e55cc72 | 816 | |
b2d3ad29 GG |
817 | asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD); |
818 | msleep(150); | |
933a27d3 DH |
819 | |
820 | /* Asix framing packs multiple eth frames into a 2K usb bulk transfer */ | |
821 | if (dev->driver_info->flags & FLAG_FRAMING_AX) { | |
822 | /* hard_mtu is still the default - the device does not support | |
823 | jumbo eth frames */ | |
824 | dev->rx_urb_size = 2048; | |
825 | } | |
933a27d3 | 826 | |
8b5b6f54 LS |
827 | dev->driver_priv = kzalloc(sizeof(struct asix_common_private), GFP_KERNEL); |
828 | if (!dev->driver_priv) | |
829 | return -ENOMEM; | |
830 | ||
83e1b918 | 831 | return 0; |
2e55cc72 DB |
832 | } |
833 | ||
834 | static const struct driver_info ax8817x_info = { | |
835 | .description = "ASIX AX8817x USB 2.0 Ethernet", | |
48b1be6a DH |
836 | .bind = ax88172_bind, |
837 | .status = asix_status, | |
2e55cc72 DB |
838 | .link_reset = ax88172_link_reset, |
839 | .reset = ax88172_link_reset, | |
37e8273c | 840 | .flags = FLAG_ETHER | FLAG_LINK_INTR, |
2e55cc72 DB |
841 | .data = 0x00130103, |
842 | }; | |
843 | ||
844 | static const struct driver_info dlink_dub_e100_info = { | |
845 | .description = "DLink DUB-E100 USB Ethernet", | |
48b1be6a DH |
846 | .bind = ax88172_bind, |
847 | .status = asix_status, | |
2e55cc72 DB |
848 | .link_reset = ax88172_link_reset, |
849 | .reset = ax88172_link_reset, | |
37e8273c | 850 | .flags = FLAG_ETHER | FLAG_LINK_INTR, |
2e55cc72 DB |
851 | .data = 0x009f9d9f, |
852 | }; | |
853 | ||
854 | static const struct driver_info netgear_fa120_info = { | |
855 | .description = "Netgear FA-120 USB Ethernet", | |
48b1be6a DH |
856 | .bind = ax88172_bind, |
857 | .status = asix_status, | |
2e55cc72 DB |
858 | .link_reset = ax88172_link_reset, |
859 | .reset = ax88172_link_reset, | |
37e8273c | 860 | .flags = FLAG_ETHER | FLAG_LINK_INTR, |
2e55cc72 DB |
861 | .data = 0x00130103, |
862 | }; | |
863 | ||
864 | static const struct driver_info hawking_uf200_info = { | |
865 | .description = "Hawking UF200 USB Ethernet", | |
48b1be6a DH |
866 | .bind = ax88172_bind, |
867 | .status = asix_status, | |
2e55cc72 DB |
868 | .link_reset = ax88172_link_reset, |
869 | .reset = ax88172_link_reset, | |
37e8273c | 870 | .flags = FLAG_ETHER | FLAG_LINK_INTR, |
2e55cc72 DB |
871 | .data = 0x001f1d1f, |
872 | }; | |
873 | ||
874 | static const struct driver_info ax88772_info = { | |
875 | .description = "ASIX AX88772 USB 2.0 Ethernet", | |
876 | .bind = ax88772_bind, | |
8b5b6f54 | 877 | .unbind = ax88772_unbind, |
48b1be6a | 878 | .status = asix_status, |
2e55cc72 | 879 | .link_reset = ax88772_link_reset, |
3cc81d85 | 880 | .reset = ax88772_link_reset, |
a9e0aca4 | 881 | .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR | FLAG_MULTI_PACKET, |
8b5b6f54 | 882 | .rx_fixup = asix_rx_fixup_common, |
933a27d3 DH |
883 | .tx_fixup = asix_tx_fixup, |
884 | }; | |
885 | ||
5620df65 LS |
886 | static const struct driver_info ax88772b_info = { |
887 | .description = "ASIX AX88772B USB 2.0 Ethernet", | |
888 | .bind = ax88772_bind, | |
8b5b6f54 | 889 | .unbind = ax88772_unbind, |
5620df65 LS |
890 | .status = asix_status, |
891 | .link_reset = ax88772_link_reset, | |
892 | .reset = ax88772_reset, | |
893 | .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR | | |
894 | FLAG_MULTI_PACKET, | |
8b5b6f54 | 895 | .rx_fixup = asix_rx_fixup_common, |
5620df65 LS |
896 | .tx_fixup = asix_tx_fixup, |
897 | .data = FLAG_EEPROM_MAC, | |
898 | }; | |
899 | ||
933a27d3 DH |
900 | static const struct driver_info ax88178_info = { |
901 | .description = "ASIX AX88178 USB 2.0 Ethernet", | |
902 | .bind = ax88178_bind, | |
8b5b6f54 | 903 | .unbind = ax88772_unbind, |
933a27d3 DH |
904 | .status = asix_status, |
905 | .link_reset = ax88178_link_reset, | |
610d885d | 906 | .reset = ax88178_reset, |
d43ff4cd EG |
907 | .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR | |
908 | FLAG_MULTI_PACKET, | |
8b5b6f54 | 909 | .rx_fixup = asix_rx_fixup_common, |
933a27d3 | 910 | .tx_fixup = asix_tx_fixup, |
2e55cc72 DB |
911 | }; |
912 | ||
45af3fb4 GT |
913 | /* |
914 | * USBLINK 20F9 "USB 2.0 LAN" USB ethernet adapter, typically found in | |
915 | * no-name packaging. | |
916 | * USB device strings are: | |
917 | * 1: Manufacturer: USBLINK | |
918 | * 2: Product: HG20F9 USB2.0 | |
919 | * 3: Serial: 000003 | |
920 | * Appears to be compatible with Asix 88772B. | |
921 | */ | |
922 | static const struct driver_info hg20f9_info = { | |
923 | .description = "HG20F9 USB 2.0 Ethernet", | |
924 | .bind = ax88772_bind, | |
925 | .unbind = ax88772_unbind, | |
926 | .status = asix_status, | |
927 | .link_reset = ax88772_link_reset, | |
928 | .reset = ax88772_reset, | |
929 | .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR | | |
930 | FLAG_MULTI_PACKET, | |
931 | .rx_fixup = asix_rx_fixup_common, | |
932 | .tx_fixup = asix_tx_fixup, | |
933 | .data = FLAG_EEPROM_MAC, | |
934 | }; | |
935 | ||
2e55cc72 DB |
936 | static const struct usb_device_id products [] = { |
937 | { | |
938 | // Linksys USB200M | |
939 | USB_DEVICE (0x077b, 0x2226), | |
940 | .driver_info = (unsigned long) &ax8817x_info, | |
941 | }, { | |
942 | // Netgear FA120 | |
943 | USB_DEVICE (0x0846, 0x1040), | |
944 | .driver_info = (unsigned long) &netgear_fa120_info, | |
945 | }, { | |
946 | // DLink DUB-E100 | |
947 | USB_DEVICE (0x2001, 0x1a00), | |
948 | .driver_info = (unsigned long) &dlink_dub_e100_info, | |
949 | }, { | |
950 | // Intellinet, ST Lab USB Ethernet | |
951 | USB_DEVICE (0x0b95, 0x1720), | |
952 | .driver_info = (unsigned long) &ax8817x_info, | |
953 | }, { | |
954 | // Hawking UF200, TrendNet TU2-ET100 | |
955 | USB_DEVICE (0x07b8, 0x420a), | |
956 | .driver_info = (unsigned long) &hawking_uf200_info, | |
957 | }, { | |
39c4b38c DH |
958 | // Billionton Systems, USB2AR |
959 | USB_DEVICE (0x08dd, 0x90ff), | |
960 | .driver_info = (unsigned long) &ax8817x_info, | |
80083a3c CSC |
961 | }, { |
962 | // Billionton Systems, GUSB2AM-1G-B | |
963 | USB_DEVICE(0x08dd, 0x0114), | |
964 | .driver_info = (unsigned long) &ax88178_info, | |
2e55cc72 DB |
965 | }, { |
966 | // ATEN UC210T | |
967 | USB_DEVICE (0x0557, 0x2009), | |
968 | .driver_info = (unsigned long) &ax8817x_info, | |
969 | }, { | |
970 | // Buffalo LUA-U2-KTX | |
971 | USB_DEVICE (0x0411, 0x003d), | |
972 | .driver_info = (unsigned long) &ax8817x_info, | |
ac7b77f1 MD |
973 | }, { |
974 | // Buffalo LUA-U2-GT 10/100/1000 | |
975 | USB_DEVICE (0x0411, 0x006e), | |
976 | .driver_info = (unsigned long) &ax88178_info, | |
2e55cc72 DB |
977 | }, { |
978 | // Sitecom LN-029 "USB 2.0 10/100 Ethernet adapter" | |
979 | USB_DEVICE (0x6189, 0x182d), | |
980 | .driver_info = (unsigned long) &ax8817x_info, | |
4e503919 JN |
981 | }, { |
982 | // Sitecom LN-031 "USB 2.0 10/100/1000 Ethernet adapter" | |
983 | USB_DEVICE (0x0df6, 0x0056), | |
984 | .driver_info = (unsigned long) &ax88178_info, | |
7488c3e3 LC |
985 | }, { |
986 | // Sitecom LN-028 "USB 2.0 10/100/1000 Ethernet adapter" | |
987 | USB_DEVICE (0x0df6, 0x061c), | |
988 | .driver_info = (unsigned long) &ax88178_info, | |
2e55cc72 DB |
989 | }, { |
990 | // corega FEther USB2-TX | |
991 | USB_DEVICE (0x07aa, 0x0017), | |
992 | .driver_info = (unsigned long) &ax8817x_info, | |
993 | }, { | |
994 | // Surecom EP-1427X-2 | |
995 | USB_DEVICE (0x1189, 0x0893), | |
996 | .driver_info = (unsigned long) &ax8817x_info, | |
997 | }, { | |
998 | // goodway corp usb gwusb2e | |
999 | USB_DEVICE (0x1631, 0x6200), | |
1000 | .driver_info = (unsigned long) &ax8817x_info, | |
39c4b38c DH |
1001 | }, { |
1002 | // JVC MP-PRX1 Port Replicator | |
1003 | USB_DEVICE (0x04f1, 0x3008), | |
1004 | .driver_info = (unsigned long) &ax8817x_info, | |
66dc81ec QP |
1005 | }, { |
1006 | // Lenovo U2L100P 10/100 | |
1007 | USB_DEVICE (0x17ef, 0x7203), | |
1008 | .driver_info = (unsigned long) &ax88772_info, | |
30885909 MV |
1009 | }, { |
1010 | // ASIX AX88772B 10/100 | |
1011 | USB_DEVICE (0x0b95, 0x772b), | |
5620df65 | 1012 | .driver_info = (unsigned long) &ax88772b_info, |
2e55cc72 DB |
1013 | }, { |
1014 | // ASIX AX88772 10/100 | |
39c4b38c DH |
1015 | USB_DEVICE (0x0b95, 0x7720), |
1016 | .driver_info = (unsigned long) &ax88772_info, | |
7327413c EW |
1017 | }, { |
1018 | // ASIX AX88178 10/100/1000 | |
1019 | USB_DEVICE (0x0b95, 0x1780), | |
933a27d3 | 1020 | .driver_info = (unsigned long) &ax88178_info, |
f4680d3d AE |
1021 | }, { |
1022 | // Logitec LAN-GTJ/U2A | |
1023 | USB_DEVICE (0x0789, 0x0160), | |
1024 | .driver_info = (unsigned long) &ax88178_info, | |
5e0f76c6 DH |
1025 | }, { |
1026 | // Linksys USB200M Rev 2 | |
1027 | USB_DEVICE (0x13b1, 0x0018), | |
1028 | .driver_info = (unsigned long) &ax88772_info, | |
5732ce84 DH |
1029 | }, { |
1030 | // 0Q0 cable ethernet | |
1031 | USB_DEVICE (0x1557, 0x7720), | |
1032 | .driver_info = (unsigned long) &ax88772_info, | |
933a27d3 DH |
1033 | }, { |
1034 | // DLink DUB-E100 H/W Ver B1 | |
1035 | USB_DEVICE (0x07d1, 0x3c05), | |
1036 | .driver_info = (unsigned long) &ax88772_info, | |
b923e7fc DH |
1037 | }, { |
1038 | // DLink DUB-E100 H/W Ver B1 Alternate | |
1039 | USB_DEVICE (0x2001, 0x3c05), | |
1040 | .driver_info = (unsigned long) &ax88772_info, | |
ed3770a9 S |
1041 | }, { |
1042 | // DLink DUB-E100 H/W Ver C1 | |
1043 | USB_DEVICE (0x2001, 0x1a02), | |
1044 | .driver_info = (unsigned long) &ax88772_info, | |
933a27d3 DH |
1045 | }, { |
1046 | // Linksys USB1000 | |
1047 | USB_DEVICE (0x1737, 0x0039), | |
1048 | .driver_info = (unsigned long) &ax88178_info, | |
b29cf31d YH |
1049 | }, { |
1050 | // IO-DATA ETG-US2 | |
1051 | USB_DEVICE (0x04bb, 0x0930), | |
1052 | .driver_info = (unsigned long) &ax88178_info, | |
2ed22bc2 DH |
1053 | }, { |
1054 | // Belkin F5D5055 | |
1055 | USB_DEVICE(0x050d, 0x5055), | |
1056 | .driver_info = (unsigned long) &ax88178_info, | |
3d60efb5 AN |
1057 | }, { |
1058 | // Apple USB Ethernet Adapter | |
1059 | USB_DEVICE(0x05ac, 0x1402), | |
1060 | .driver_info = (unsigned long) &ax88772_info, | |
ccf95402 JC |
1061 | }, { |
1062 | // Cables-to-Go USB Ethernet Adapter | |
1063 | USB_DEVICE(0x0b95, 0x772a), | |
1064 | .driver_info = (unsigned long) &ax88772_info, | |
fef7cc08 GKH |
1065 | }, { |
1066 | // ABOCOM for pci | |
1067 | USB_DEVICE(0x14ea, 0xab11), | |
1068 | .driver_info = (unsigned long) &ax88178_info, | |
1069 | }, { | |
1070 | // ASIX 88772a | |
1071 | USB_DEVICE(0x0db0, 0xa877), | |
1072 | .driver_info = (unsigned long) &ax88772_info, | |
e8303a3b AJ |
1073 | }, { |
1074 | // Asus USB Ethernet Adapter | |
1075 | USB_DEVICE (0x0b95, 0x7e2b), | |
1076 | .driver_info = (unsigned long) &ax88772_info, | |
16626b0c CR |
1077 | }, { |
1078 | /* ASIX 88172a demo board */ | |
1079 | USB_DEVICE(0x0b95, 0x172a), | |
1080 | .driver_info = (unsigned long) &ax88172a_info, | |
45af3fb4 GT |
1081 | }, { |
1082 | /* | |
1083 | * USBLINK HG20F9 "USB 2.0 LAN" | |
1084 | * Appears to have gazumped Linksys's manufacturer ID but | |
1085 | * doesn't (yet) conflict with any known Linksys product. | |
1086 | */ | |
1087 | USB_DEVICE(0x066b, 0x20f9), | |
1088 | .driver_info = (unsigned long) &hg20f9_info, | |
2e55cc72 DB |
1089 | }, |
1090 | { }, // END | |
1091 | }; | |
1092 | MODULE_DEVICE_TABLE(usb, products); | |
1093 | ||
1094 | static struct usb_driver asix_driver = { | |
83e1b918 | 1095 | .name = DRIVER_NAME, |
2e55cc72 DB |
1096 | .id_table = products, |
1097 | .probe = usbnet_probe, | |
1098 | .suspend = usbnet_suspend, | |
1099 | .resume = usbnet_resume, | |
1100 | .disconnect = usbnet_disconnect, | |
a11a6544 | 1101 | .supports_autosuspend = 1, |
e1f12eb6 | 1102 | .disable_hub_initiated_lpm = 1, |
2e55cc72 DB |
1103 | }; |
1104 | ||
d632eb1b | 1105 | module_usb_driver(asix_driver); |
2e55cc72 DB |
1106 | |
1107 | MODULE_AUTHOR("David Hollis"); | |
4ad1438f | 1108 | MODULE_VERSION(DRIVER_VERSION); |
2e55cc72 DB |
1109 | MODULE_DESCRIPTION("ASIX AX8817X based USB 2.0 Ethernet Devices"); |
1110 | MODULE_LICENSE("GPL"); | |
1111 |