Commit | Line | Data |
---|---|---|
2a36d708 | 1 | /* |
00e49913 | 2 | * MOSCHIP MCS7830 based USB 2.0 Ethernet Devices |
2a36d708 AB |
3 | * |
4 | * based on usbnet.c, asix.c and the vendor provided mcs7830 driver | |
5 | * | |
76802851 | 6 | * Copyright (C) 2010 Andreas Mohr <andi@lisas.de> |
2a36d708 AB |
7 | * Copyright (C) 2006 Arnd Bergmann <arnd@arndb.de> |
8 | * Copyright (C) 2003-2005 David Hollis <dhollis@davehollis.com> | |
9 | * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net> | |
10 | * Copyright (c) 2002-2003 TiVo Inc. | |
11 | * | |
76802851 AM |
12 | * Definitions gathered from MOSCHIP, Data Sheet_7830DA.pdf (thanks!). |
13 | * | |
14 | * TODO: | |
76802851 AM |
15 | * - support HIF_REG_CONFIG_SLEEPMODE/HIF_REG_CONFIG_TXENABLE (via autopm?) |
16 | * - implement ethtool_ops get_pauseparam/set_pauseparam | |
17 | * via HIF_REG_PAUSE_THRESHOLD (>= revision C only!) | |
18 | * - implement get_eeprom/[set_eeprom] | |
19 | * - switch PHY on/off on ifup/ifdown (perhaps in usbnet.c, via MII) | |
20 | * - mcs7830_get_regs() handling is weird: for rev 2 we return 32 regs, | |
21 | * can access only ~ 24, remaining user buffer is uninitialized garbage | |
22 | * - anything else? | |
23 | * | |
24 | * | |
2a36d708 AB |
25 | * This program is free software; you can redistribute it and/or modify |
26 | * it under the terms of the GNU General Public License as published by | |
27 | * the Free Software Foundation; either version 2 of the License, or | |
28 | * (at your option) any later version. | |
29 | * | |
30 | * This program is distributed in the hope that it will be useful, | |
31 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
32 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
33 | * GNU General Public License for more details. | |
34 | * | |
35 | * You should have received a copy of the GNU General Public License | |
36 | * along with this program; if not, write to the Free Software | |
37 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
38 | */ | |
39 | ||
40 | #include <linux/crc32.h> | |
41 | #include <linux/etherdevice.h> | |
42 | #include <linux/ethtool.h> | |
43 | #include <linux/init.h> | |
44 | #include <linux/mii.h> | |
45 | #include <linux/module.h> | |
46 | #include <linux/netdevice.h> | |
5a0e3ad6 | 47 | #include <linux/slab.h> |
2a36d708 | 48 | #include <linux/usb.h> |
3692e94f | 49 | #include <linux/usb/usbnet.h> |
2a36d708 AB |
50 | |
51 | /* requests */ | |
52 | #define MCS7830_RD_BMREQ (USB_DIR_IN | USB_TYPE_VENDOR | \ | |
53 | USB_RECIP_DEVICE) | |
54 | #define MCS7830_WR_BMREQ (USB_DIR_OUT | USB_TYPE_VENDOR | \ | |
55 | USB_RECIP_DEVICE) | |
56 | #define MCS7830_RD_BREQ 0x0E | |
57 | #define MCS7830_WR_BREQ 0x0D | |
58 | ||
59 | #define MCS7830_CTRL_TIMEOUT 1000 | |
60 | #define MCS7830_MAX_MCAST 64 | |
61 | ||
62 | #define MCS7830_VENDOR_ID 0x9710 | |
63 | #define MCS7830_PRODUCT_ID 0x7830 | |
8382cc1c AB |
64 | #define MCS7730_PRODUCT_ID 0x7730 |
65 | ||
66 | #define SITECOM_VENDOR_ID 0x0DF6 | |
67 | #define LN_030_PRODUCT_ID 0x0021 | |
2a36d708 AB |
68 | |
69 | #define MCS7830_MII_ADVERTISE (ADVERTISE_PAUSE_CAP | ADVERTISE_100FULL | \ | |
70 | ADVERTISE_100HALF | ADVERTISE_10FULL | \ | |
71 | ADVERTISE_10HALF | ADVERTISE_CSMA) | |
72 | ||
00e49913 | 73 | /* HIF_REG_XX corresponding index value */ |
2a36d708 AB |
74 | enum { |
75 | HIF_REG_MULTICAST_HASH = 0x00, | |
76 | HIF_REG_PACKET_GAP1 = 0x08, | |
77 | HIF_REG_PACKET_GAP2 = 0x09, | |
78 | HIF_REG_PHY_DATA = 0x0a, | |
79 | HIF_REG_PHY_CMD1 = 0x0c, | |
80 | HIF_REG_PHY_CMD1_READ = 0x40, | |
81 | HIF_REG_PHY_CMD1_WRITE = 0x20, | |
82 | HIF_REG_PHY_CMD1_PHYADDR = 0x01, | |
83 | HIF_REG_PHY_CMD2 = 0x0d, | |
84 | HIF_REG_PHY_CMD2_PEND_FLAG_BIT = 0x80, | |
85 | HIF_REG_PHY_CMD2_READY_FLAG_BIT = 0x40, | |
86 | HIF_REG_CONFIG = 0x0e, | |
c774651a | 87 | /* hmm, spec sez: "R/W", "Except bit 3" (likely TXENABLE). */ |
2a36d708 AB |
88 | HIF_REG_CONFIG_CFG = 0x80, |
89 | HIF_REG_CONFIG_SPEED100 = 0x40, | |
90 | HIF_REG_CONFIG_FULLDUPLEX_ENABLE = 0x20, | |
91 | HIF_REG_CONFIG_RXENABLE = 0x10, | |
92 | HIF_REG_CONFIG_TXENABLE = 0x08, | |
93 | HIF_REG_CONFIG_SLEEPMODE = 0x04, | |
94 | HIF_REG_CONFIG_ALLMULTICAST = 0x02, | |
00e49913 | 95 | HIF_REG_CONFIG_PROMISCUOUS = 0x01, |
2a36d708 | 96 | HIF_REG_ETHERNET_ADDR = 0x0f, |
c774651a | 97 | HIF_REG_FRAME_DROP_COUNTER = 0x15, /* 0..ff; reset: 0 */ |
2a36d708 AB |
98 | HIF_REG_PAUSE_THRESHOLD = 0x16, |
99 | HIF_REG_PAUSE_THRESHOLD_DEFAULT = 0, | |
100 | }; | |
101 | ||
76802851 AM |
102 | /* Trailing status byte in Ethernet Rx frame */ |
103 | enum { | |
104 | MCS7830_RX_SHORT_FRAME = 0x01, /* < 64 bytes */ | |
105 | MCS7830_RX_LENGTH_ERROR = 0x02, /* framelen != Ethernet length field */ | |
106 | MCS7830_RX_ALIGNMENT_ERROR = 0x04, /* non-even number of nibbles */ | |
107 | MCS7830_RX_CRC_ERROR = 0x08, | |
108 | MCS7830_RX_LARGE_FRAME = 0x10, /* > 1518 bytes */ | |
109 | MCS7830_RX_FRAME_CORRECT = 0x20, /* frame is correct */ | |
110 | /* [7:6] reserved */ | |
111 | }; | |
112 | ||
2a36d708 AB |
113 | struct mcs7830_data { |
114 | u8 multi_filter[8]; | |
115 | u8 config; | |
116 | }; | |
117 | ||
118 | static const char driver_name[] = "MOSCHIP usb-ethernet driver"; | |
119 | ||
120 | static int mcs7830_get_reg(struct usbnet *dev, u16 index, u16 size, void *data) | |
121 | { | |
122 | struct usb_device *xdev = dev->udev; | |
123 | int ret; | |
6d317482 CE |
124 | void *buffer; |
125 | ||
126 | buffer = kmalloc(size, GFP_NOIO); | |
127 | if (buffer == NULL) | |
128 | return -ENOMEM; | |
2a36d708 AB |
129 | |
130 | ret = usb_control_msg(xdev, usb_rcvctrlpipe(xdev, 0), MCS7830_RD_BREQ, | |
6d317482 | 131 | MCS7830_RD_BMREQ, 0x0000, index, buffer, |
1d39da3d | 132 | size, MCS7830_CTRL_TIMEOUT); |
6d317482 CE |
133 | memcpy(data, buffer, size); |
134 | kfree(buffer); | |
135 | ||
2a36d708 AB |
136 | return ret; |
137 | } | |
138 | ||
ace2a4d0 | 139 | static int mcs7830_set_reg(struct usbnet *dev, u16 index, u16 size, const void *data) |
2a36d708 AB |
140 | { |
141 | struct usb_device *xdev = dev->udev; | |
142 | int ret; | |
6d317482 CE |
143 | void *buffer; |
144 | ||
99bf2366 | 145 | buffer = kmemdup(data, size, GFP_NOIO); |
6d317482 CE |
146 | if (buffer == NULL) |
147 | return -ENOMEM; | |
148 | ||
2a36d708 | 149 | ret = usb_control_msg(xdev, usb_sndctrlpipe(xdev, 0), MCS7830_WR_BREQ, |
6d317482 | 150 | MCS7830_WR_BMREQ, 0x0000, index, buffer, |
1d39da3d | 151 | size, MCS7830_CTRL_TIMEOUT); |
6d317482 | 152 | kfree(buffer); |
2a36d708 AB |
153 | return ret; |
154 | } | |
155 | ||
156 | static void mcs7830_async_cmd_callback(struct urb *urb) | |
157 | { | |
158 | struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context; | |
c94cb314 | 159 | int status = urb->status; |
2a36d708 | 160 | |
c94cb314 | 161 | if (status < 0) |
898eb71c | 162 | printk(KERN_DEBUG "%s() failed with %d\n", |
c94cb314 | 163 | __func__, status); |
2a36d708 AB |
164 | |
165 | kfree(req); | |
166 | usb_free_urb(urb); | |
167 | } | |
168 | ||
169 | static void mcs7830_set_reg_async(struct usbnet *dev, u16 index, u16 size, void *data) | |
170 | { | |
171 | struct usb_ctrlrequest *req; | |
172 | int ret; | |
173 | struct urb *urb; | |
174 | ||
175 | urb = usb_alloc_urb(0, GFP_ATOMIC); | |
176 | if (!urb) { | |
898eb71c JP |
177 | dev_dbg(&dev->udev->dev, |
178 | "Error allocating URB in write_cmd_async!\n"); | |
2a36d708 AB |
179 | return; |
180 | } | |
181 | ||
182 | req = kmalloc(sizeof *req, GFP_ATOMIC); | |
183 | if (!req) { | |
898eb71c JP |
184 | dev_err(&dev->udev->dev, |
185 | "Failed to allocate memory for control request\n"); | |
2a36d708 AB |
186 | goto out; |
187 | } | |
188 | req->bRequestType = MCS7830_WR_BMREQ; | |
189 | req->bRequest = MCS7830_WR_BREQ; | |
190 | req->wValue = 0; | |
191 | req->wIndex = cpu_to_le16(index); | |
192 | req->wLength = cpu_to_le16(size); | |
193 | ||
194 | usb_fill_control_urb(urb, dev->udev, | |
195 | usb_sndctrlpipe(dev->udev, 0), | |
196 | (void *)req, data, size, | |
197 | mcs7830_async_cmd_callback, req); | |
198 | ||
199 | ret = usb_submit_urb(urb, GFP_ATOMIC); | |
200 | if (ret < 0) { | |
898eb71c JP |
201 | dev_err(&dev->udev->dev, |
202 | "Error submitting the control message: ret=%d\n", ret); | |
2a36d708 AB |
203 | goto out; |
204 | } | |
205 | return; | |
206 | out: | |
207 | kfree(req); | |
208 | usb_free_urb(urb); | |
209 | } | |
210 | ||
ace2a4d0 AM |
211 | static int mcs7830_hif_get_mac_address(struct usbnet *dev, unsigned char *addr) |
212 | { | |
213 | int ret = mcs7830_get_reg(dev, HIF_REG_ETHERNET_ADDR, ETH_ALEN, addr); | |
214 | if (ret < 0) | |
215 | return ret; | |
216 | return 0; | |
217 | } | |
218 | ||
219 | static int mcs7830_hif_set_mac_address(struct usbnet *dev, unsigned char *addr) | |
220 | { | |
221 | int ret = mcs7830_set_reg(dev, HIF_REG_ETHERNET_ADDR, ETH_ALEN, addr); | |
222 | ||
223 | if (ret < 0) | |
224 | return ret; | |
225 | return 0; | |
226 | } | |
227 | ||
228 | static int mcs7830_set_mac_address(struct net_device *netdev, void *p) | |
2a36d708 AB |
229 | { |
230 | int ret; | |
ace2a4d0 AM |
231 | struct usbnet *dev = netdev_priv(netdev); |
232 | struct sockaddr *addr = p; | |
233 | ||
234 | if (netif_running(netdev)) | |
235 | return -EBUSY; | |
236 | ||
237 | if (!is_valid_ether_addr(addr->sa_data)) | |
238 | return -EINVAL; | |
239 | ||
240 | ret = mcs7830_hif_set_mac_address(dev, addr->sa_data); | |
241 | ||
2a36d708 AB |
242 | if (ret < 0) |
243 | return ret; | |
ace2a4d0 AM |
244 | |
245 | /* it worked --> adopt it on netdev side */ | |
246 | memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); | |
247 | ||
2a36d708 AB |
248 | return 0; |
249 | } | |
250 | ||
251 | static int mcs7830_read_phy(struct usbnet *dev, u8 index) | |
252 | { | |
253 | int ret; | |
254 | int i; | |
255 | __le16 val; | |
256 | ||
257 | u8 cmd[2] = { | |
258 | HIF_REG_PHY_CMD1_READ | HIF_REG_PHY_CMD1_PHYADDR, | |
259 | HIF_REG_PHY_CMD2_PEND_FLAG_BIT | index, | |
260 | }; | |
261 | ||
a9fc6338 | 262 | mutex_lock(&dev->phy_mutex); |
2a36d708 AB |
263 | /* write the MII command */ |
264 | ret = mcs7830_set_reg(dev, HIF_REG_PHY_CMD1, 2, cmd); | |
265 | if (ret < 0) | |
266 | goto out; | |
267 | ||
268 | /* wait for the data to become valid, should be within < 1ms */ | |
269 | for (i = 0; i < 10; i++) { | |
270 | ret = mcs7830_get_reg(dev, HIF_REG_PHY_CMD1, 2, cmd); | |
271 | if ((ret < 0) || (cmd[1] & HIF_REG_PHY_CMD2_READY_FLAG_BIT)) | |
272 | break; | |
273 | ret = -EIO; | |
274 | msleep(1); | |
275 | } | |
276 | if (ret < 0) | |
277 | goto out; | |
278 | ||
279 | /* read actual register contents */ | |
280 | ret = mcs7830_get_reg(dev, HIF_REG_PHY_DATA, 2, &val); | |
281 | if (ret < 0) | |
282 | goto out; | |
283 | ret = le16_to_cpu(val); | |
284 | dev_dbg(&dev->udev->dev, "read PHY reg %02x: %04x (%d tries)\n", | |
285 | index, val, i); | |
286 | out: | |
a9fc6338 | 287 | mutex_unlock(&dev->phy_mutex); |
2a36d708 AB |
288 | return ret; |
289 | } | |
290 | ||
291 | static int mcs7830_write_phy(struct usbnet *dev, u8 index, u16 val) | |
292 | { | |
293 | int ret; | |
294 | int i; | |
295 | __le16 le_val; | |
296 | ||
297 | u8 cmd[2] = { | |
298 | HIF_REG_PHY_CMD1_WRITE | HIF_REG_PHY_CMD1_PHYADDR, | |
299 | HIF_REG_PHY_CMD2_PEND_FLAG_BIT | (index & 0x1F), | |
300 | }; | |
301 | ||
a9fc6338 AB |
302 | mutex_lock(&dev->phy_mutex); |
303 | ||
2a36d708 AB |
304 | /* write the new register contents */ |
305 | le_val = cpu_to_le16(val); | |
306 | ret = mcs7830_set_reg(dev, HIF_REG_PHY_DATA, 2, &le_val); | |
307 | if (ret < 0) | |
308 | goto out; | |
309 | ||
310 | /* write the MII command */ | |
311 | ret = mcs7830_set_reg(dev, HIF_REG_PHY_CMD1, 2, cmd); | |
312 | if (ret < 0) | |
313 | goto out; | |
314 | ||
315 | /* wait for the command to be accepted by the PHY */ | |
316 | for (i = 0; i < 10; i++) { | |
317 | ret = mcs7830_get_reg(dev, HIF_REG_PHY_CMD1, 2, cmd); | |
318 | if ((ret < 0) || (cmd[1] & HIF_REG_PHY_CMD2_READY_FLAG_BIT)) | |
319 | break; | |
320 | ret = -EIO; | |
321 | msleep(1); | |
322 | } | |
323 | if (ret < 0) | |
324 | goto out; | |
325 | ||
326 | ret = 0; | |
327 | dev_dbg(&dev->udev->dev, "write PHY reg %02x: %04x (%d tries)\n", | |
328 | index, val, i); | |
329 | out: | |
a9fc6338 | 330 | mutex_unlock(&dev->phy_mutex); |
2a36d708 AB |
331 | return ret; |
332 | } | |
333 | ||
334 | /* | |
335 | * This algorithm comes from the original mcs7830 version 1.4 driver, | |
336 | * not sure if it is needed. | |
337 | */ | |
338 | static int mcs7830_set_autoneg(struct usbnet *dev, int ptrUserPhyMode) | |
339 | { | |
340 | int ret; | |
341 | /* Enable all media types */ | |
342 | ret = mcs7830_write_phy(dev, MII_ADVERTISE, MCS7830_MII_ADVERTISE); | |
343 | ||
344 | /* First reset BMCR */ | |
345 | if (!ret) | |
346 | ret = mcs7830_write_phy(dev, MII_BMCR, 0x0000); | |
347 | /* Enable Auto Neg */ | |
348 | if (!ret) | |
349 | ret = mcs7830_write_phy(dev, MII_BMCR, BMCR_ANENABLE); | |
350 | /* Restart Auto Neg (Keep the Enable Auto Neg Bit Set) */ | |
351 | if (!ret) | |
352 | ret = mcs7830_write_phy(dev, MII_BMCR, | |
353 | BMCR_ANENABLE | BMCR_ANRESTART ); | |
354 | return ret < 0 ? : 0; | |
355 | } | |
356 | ||
357 | ||
358 | /* | |
359 | * if we can read register 22, the chip revision is C or higher | |
360 | */ | |
361 | static int mcs7830_get_rev(struct usbnet *dev) | |
362 | { | |
363 | u8 dummy[2]; | |
364 | int ret; | |
c774651a | 365 | ret = mcs7830_get_reg(dev, HIF_REG_FRAME_DROP_COUNTER, 2, dummy); |
2a36d708 AB |
366 | if (ret > 0) |
367 | return 2; /* Rev C or later */ | |
368 | return 1; /* earlier revision */ | |
369 | } | |
370 | ||
371 | /* | |
372 | * On rev. C we need to set the pause threshold | |
373 | */ | |
374 | static void mcs7830_rev_C_fixup(struct usbnet *dev) | |
375 | { | |
376 | u8 pause_threshold = HIF_REG_PAUSE_THRESHOLD_DEFAULT; | |
377 | int retry; | |
378 | ||
379 | for (retry = 0; retry < 2; retry++) { | |
380 | if (mcs7830_get_rev(dev) == 2) { | |
381 | dev_info(&dev->udev->dev, "applying rev.C fixup\n"); | |
382 | mcs7830_set_reg(dev, HIF_REG_PAUSE_THRESHOLD, | |
383 | 1, &pause_threshold); | |
384 | } | |
385 | msleep(1); | |
386 | } | |
387 | } | |
388 | ||
2a36d708 AB |
389 | static int mcs7830_mdio_read(struct net_device *netdev, int phy_id, |
390 | int location) | |
391 | { | |
8f15ea42 | 392 | struct usbnet *dev = netdev_priv(netdev); |
2a36d708 AB |
393 | return mcs7830_read_phy(dev, location); |
394 | } | |
395 | ||
396 | static void mcs7830_mdio_write(struct net_device *netdev, int phy_id, | |
397 | int location, int val) | |
398 | { | |
8f15ea42 | 399 | struct usbnet *dev = netdev_priv(netdev); |
2a36d708 AB |
400 | mcs7830_write_phy(dev, location, val); |
401 | } | |
402 | ||
403 | static int mcs7830_ioctl(struct net_device *net, struct ifreq *rq, int cmd) | |
404 | { | |
405 | struct usbnet *dev = netdev_priv(net); | |
406 | return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL); | |
407 | } | |
408 | ||
ace2a4d0 AM |
409 | static inline struct mcs7830_data *mcs7830_get_data(struct usbnet *dev) |
410 | { | |
411 | return (struct mcs7830_data *)&dev->data; | |
412 | } | |
413 | ||
414 | static void mcs7830_hif_update_multicast_hash(struct usbnet *dev) | |
415 | { | |
416 | struct mcs7830_data *data = mcs7830_get_data(dev); | |
417 | mcs7830_set_reg_async(dev, HIF_REG_MULTICAST_HASH, | |
418 | sizeof data->multi_filter, | |
419 | data->multi_filter); | |
420 | } | |
421 | ||
422 | static void mcs7830_hif_update_config(struct usbnet *dev) | |
423 | { | |
424 | /* implementation specific to data->config | |
425 | (argument needs to be heap-based anyway - USB DMA!) */ | |
426 | struct mcs7830_data *data = mcs7830_get_data(dev); | |
427 | mcs7830_set_reg_async(dev, HIF_REG_CONFIG, 1, &data->config); | |
428 | } | |
429 | ||
430 | static void mcs7830_data_set_multicast(struct net_device *net) | |
2a36d708 AB |
431 | { |
432 | struct usbnet *dev = netdev_priv(net); | |
ace2a4d0 AM |
433 | struct mcs7830_data *data = mcs7830_get_data(dev); |
434 | ||
435 | memset(data->multi_filter, 0, sizeof data->multi_filter); | |
2a36d708 AB |
436 | |
437 | data->config = HIF_REG_CONFIG_TXENABLE; | |
438 | ||
439 | /* this should not be needed, but it doesn't work otherwise */ | |
440 | data->config |= HIF_REG_CONFIG_ALLMULTICAST; | |
441 | ||
442 | if (net->flags & IFF_PROMISC) { | |
00e49913 | 443 | data->config |= HIF_REG_CONFIG_PROMISCUOUS; |
8e95a202 | 444 | } else if (net->flags & IFF_ALLMULTI || |
4cd24eaf | 445 | netdev_mc_count(net) > MCS7830_MAX_MCAST) { |
2a36d708 | 446 | data->config |= HIF_REG_CONFIG_ALLMULTICAST; |
4cd24eaf | 447 | } else if (netdev_mc_empty(net)) { |
2a36d708 AB |
448 | /* just broadcast and directed */ |
449 | } else { | |
450 | /* We use the 20 byte dev->data | |
451 | * for our 8 byte filter buffer | |
452 | * to avoid allocating memory that | |
453 | * is tricky to free later */ | |
22bedad3 | 454 | struct netdev_hw_addr *ha; |
2a36d708 | 455 | u32 crc_bits; |
2a36d708 | 456 | |
2a36d708 | 457 | /* Build the multicast hash filter. */ |
22bedad3 JP |
458 | netdev_for_each_mc_addr(ha, net) { |
459 | crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26; | |
2a36d708 | 460 | data->multi_filter[crc_bits >> 3] |= 1 << (crc_bits & 7); |
2a36d708 | 461 | } |
ace2a4d0 AM |
462 | } |
463 | } | |
2a36d708 | 464 | |
ace2a4d0 AM |
465 | static int mcs7830_apply_base_config(struct usbnet *dev) |
466 | { | |
467 | int ret; | |
468 | ||
469 | /* re-configure known MAC (suspend case etc.) */ | |
470 | ret = mcs7830_hif_set_mac_address(dev, dev->net->dev_addr); | |
471 | if (ret) { | |
472 | dev_info(&dev->udev->dev, "Cannot set MAC address\n"); | |
473 | goto out; | |
2a36d708 AB |
474 | } |
475 | ||
ace2a4d0 AM |
476 | /* Set up PHY */ |
477 | ret = mcs7830_set_autoneg(dev, 0); | |
478 | if (ret) { | |
479 | dev_info(&dev->udev->dev, "Cannot set autoneg\n"); | |
480 | goto out; | |
481 | } | |
482 | ||
483 | mcs7830_hif_update_multicast_hash(dev); | |
484 | mcs7830_hif_update_config(dev); | |
485 | ||
486 | mcs7830_rev_C_fixup(dev); | |
487 | ret = 0; | |
488 | out: | |
489 | return ret; | |
490 | } | |
491 | ||
492 | /* credits go to asix_set_multicast */ | |
493 | static void mcs7830_set_multicast(struct net_device *net) | |
494 | { | |
495 | struct usbnet *dev = netdev_priv(net); | |
496 | ||
497 | mcs7830_data_set_multicast(net); | |
498 | ||
499 | mcs7830_hif_update_multicast_hash(dev); | |
500 | mcs7830_hif_update_config(dev); | |
2a36d708 AB |
501 | } |
502 | ||
503 | static int mcs7830_get_regs_len(struct net_device *net) | |
504 | { | |
505 | struct usbnet *dev = netdev_priv(net); | |
506 | ||
507 | switch (mcs7830_get_rev(dev)) { | |
508 | case 1: | |
509 | return 21; | |
510 | case 2: | |
511 | return 32; | |
512 | } | |
513 | return 0; | |
514 | } | |
515 | ||
516 | static void mcs7830_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *drvinfo) | |
517 | { | |
518 | usbnet_get_drvinfo(net, drvinfo); | |
519 | drvinfo->regdump_len = mcs7830_get_regs_len(net); | |
520 | } | |
521 | ||
522 | static void mcs7830_get_regs(struct net_device *net, struct ethtool_regs *regs, void *data) | |
523 | { | |
524 | struct usbnet *dev = netdev_priv(net); | |
525 | ||
526 | regs->version = mcs7830_get_rev(dev); | |
527 | mcs7830_get_reg(dev, 0, regs->len, data); | |
528 | } | |
529 | ||
0fc0b732 | 530 | static const struct ethtool_ops mcs7830_ethtool_ops = { |
2a36d708 AB |
531 | .get_drvinfo = mcs7830_get_drvinfo, |
532 | .get_regs_len = mcs7830_get_regs_len, | |
533 | .get_regs = mcs7830_get_regs, | |
534 | ||
535 | /* common usbnet calls */ | |
c41286fd | 536 | .get_link = usbnet_get_link, |
2a36d708 AB |
537 | .get_msglevel = usbnet_get_msglevel, |
538 | .set_msglevel = usbnet_set_msglevel, | |
c41286fd AB |
539 | .get_settings = usbnet_get_settings, |
540 | .set_settings = usbnet_set_settings, | |
541 | .nway_reset = usbnet_nway_reset, | |
2a36d708 AB |
542 | }; |
543 | ||
e12c4f83 SH |
544 | static const struct net_device_ops mcs7830_netdev_ops = { |
545 | .ndo_open = usbnet_open, | |
546 | .ndo_stop = usbnet_stop, | |
547 | .ndo_start_xmit = usbnet_start_xmit, | |
548 | .ndo_tx_timeout = usbnet_tx_timeout, | |
549 | .ndo_change_mtu = usbnet_change_mtu, | |
550 | .ndo_validate_addr = eth_validate_addr, | |
551 | .ndo_do_ioctl = mcs7830_ioctl, | |
552 | .ndo_set_multicast_list = mcs7830_set_multicast, | |
00e49913 | 553 | .ndo_set_mac_address = mcs7830_set_mac_address, |
e12c4f83 SH |
554 | }; |
555 | ||
2a36d708 AB |
556 | static int mcs7830_bind(struct usbnet *dev, struct usb_interface *udev) |
557 | { | |
558 | struct net_device *net = dev->net; | |
559 | int ret; | |
ace2a4d0 | 560 | int retry; |
2a36d708 | 561 | |
ace2a4d0 AM |
562 | /* Initial startup: Gather MAC address setting from EEPROM */ |
563 | ret = -EINVAL; | |
564 | for (retry = 0; retry < 5 && ret; retry++) | |
565 | ret = mcs7830_hif_get_mac_address(dev, net->dev_addr); | |
566 | if (ret) { | |
567 | dev_warn(&dev->udev->dev, "Cannot read MAC address\n"); | |
568 | goto out; | |
569 | } | |
570 | ||
571 | mcs7830_data_set_multicast(net); | |
572 | ||
573 | ret = mcs7830_apply_base_config(dev); | |
2a36d708 AB |
574 | if (ret) |
575 | goto out; | |
576 | ||
2a36d708 | 577 | net->ethtool_ops = &mcs7830_ethtool_ops; |
e12c4f83 | 578 | net->netdev_ops = &mcs7830_netdev_ops; |
2a36d708 AB |
579 | |
580 | /* reserve space for the status byte on rx */ | |
581 | dev->rx_urb_size = ETH_FRAME_LEN + 1; | |
582 | ||
583 | dev->mii.mdio_read = mcs7830_mdio_read; | |
584 | dev->mii.mdio_write = mcs7830_mdio_write; | |
585 | dev->mii.dev = net; | |
586 | dev->mii.phy_id_mask = 0x3f; | |
587 | dev->mii.reg_num_mask = 0x1f; | |
588 | dev->mii.phy_id = *((u8 *) net->dev_addr + 1); | |
589 | ||
590 | ret = usbnet_get_endpoints(dev, udev); | |
591 | out: | |
592 | return ret; | |
593 | } | |
594 | ||
00e49913 | 595 | /* The chip always appends a status byte that we need to strip */ |
2a36d708 AB |
596 | static int mcs7830_rx_fixup(struct usbnet *dev, struct sk_buff *skb) |
597 | { | |
598 | u8 status; | |
599 | ||
600 | if (skb->len == 0) { | |
601 | dev_err(&dev->udev->dev, "unexpected empty rx frame\n"); | |
602 | return 0; | |
603 | } | |
604 | ||
605 | skb_trim(skb, skb->len - 1); | |
606 | status = skb->data[skb->len]; | |
607 | ||
76802851 | 608 | if (status != MCS7830_RX_FRAME_CORRECT) { |
2a36d708 AB |
609 | dev_dbg(&dev->udev->dev, "rx fixup status %x\n", status); |
610 | ||
76802851 AM |
611 | /* hmm, perhaps usbnet.c already sees a globally visible |
612 | frame error and increments rx_errors on its own already? */ | |
613 | dev->net->stats.rx_errors++; | |
614 | ||
615 | if (status & (MCS7830_RX_SHORT_FRAME | |
616 | |MCS7830_RX_LENGTH_ERROR | |
617 | |MCS7830_RX_LARGE_FRAME)) | |
618 | dev->net->stats.rx_length_errors++; | |
619 | if (status & MCS7830_RX_ALIGNMENT_ERROR) | |
620 | dev->net->stats.rx_frame_errors++; | |
621 | if (status & MCS7830_RX_CRC_ERROR) | |
622 | dev->net->stats.rx_crc_errors++; | |
623 | } | |
624 | ||
2a36d708 AB |
625 | return skb->len > 0; |
626 | } | |
627 | ||
628 | static const struct driver_info moschip_info = { | |
8382cc1c AB |
629 | .description = "MOSCHIP 7830/7730 usb-NET adapter", |
630 | .bind = mcs7830_bind, | |
631 | .rx_fixup = mcs7830_rx_fixup, | |
632 | .flags = FLAG_ETHER, | |
633 | .in = 1, | |
634 | .out = 2, | |
635 | }; | |
636 | ||
637 | static const struct driver_info sitecom_info = { | |
638 | .description = "Sitecom LN-30 usb-NET adapter", | |
2a36d708 AB |
639 | .bind = mcs7830_bind, |
640 | .rx_fixup = mcs7830_rx_fixup, | |
641 | .flags = FLAG_ETHER, | |
642 | .in = 1, | |
643 | .out = 2, | |
644 | }; | |
645 | ||
646 | static const struct usb_device_id products[] = { | |
647 | { | |
648 | USB_DEVICE(MCS7830_VENDOR_ID, MCS7830_PRODUCT_ID), | |
649 | .driver_info = (unsigned long) &moschip_info, | |
650 | }, | |
8382cc1c AB |
651 | { |
652 | USB_DEVICE(MCS7830_VENDOR_ID, MCS7730_PRODUCT_ID), | |
653 | .driver_info = (unsigned long) &moschip_info, | |
654 | }, | |
655 | { | |
656 | USB_DEVICE(SITECOM_VENDOR_ID, LN_030_PRODUCT_ID), | |
657 | .driver_info = (unsigned long) &sitecom_info, | |
658 | }, | |
2a36d708 AB |
659 | {}, |
660 | }; | |
661 | MODULE_DEVICE_TABLE(usb, products); | |
662 | ||
ace2a4d0 AM |
663 | static int mcs7830_reset_resume (struct usb_interface *intf) |
664 | { | |
665 | /* YES, this function is successful enough that ethtool -d | |
666 | does show same output pre-/post-suspend */ | |
667 | ||
668 | struct usbnet *dev = usb_get_intfdata(intf); | |
669 | ||
670 | mcs7830_apply_base_config(dev); | |
671 | ||
672 | usbnet_resume(intf); | |
673 | ||
674 | return 0; | |
675 | } | |
676 | ||
2a36d708 AB |
677 | static struct usb_driver mcs7830_driver = { |
678 | .name = driver_name, | |
679 | .id_table = products, | |
680 | .probe = usbnet_probe, | |
681 | .disconnect = usbnet_disconnect, | |
682 | .suspend = usbnet_suspend, | |
683 | .resume = usbnet_resume, | |
ace2a4d0 | 684 | .reset_resume = mcs7830_reset_resume, |
2a36d708 AB |
685 | }; |
686 | ||
687 | static int __init mcs7830_init(void) | |
688 | { | |
689 | return usb_register(&mcs7830_driver); | |
690 | } | |
691 | module_init(mcs7830_init); | |
692 | ||
693 | static void __exit mcs7830_exit(void) | |
694 | { | |
695 | usb_deregister(&mcs7830_driver); | |
696 | } | |
697 | module_exit(mcs7830_exit); | |
698 | ||
699 | MODULE_DESCRIPTION("USB to network adapter MCS7830)"); | |
700 | MODULE_LICENSE("GPL"); |