Commit | Line | Data |
---|---|---|
703da5a1 RV |
1 | /****************************************************************************** |
2 | * This software may be used and distributed according to the terms of | |
3 | * the GNU General Public License (GPL), incorporated herein by reference. | |
4 | * Drivers based on or derived from this code fall under the GPL and must | |
5 | * retain the authorship, copyright and license notice. This file is not | |
6 | * a complete program and may only be used when the entire operating | |
7 | * system is licensed under the GPL. | |
8 | * See the file COPYING in this distribution for more information. | |
9 | * | |
10 | * vxge-main.c: Driver for Neterion Inc's X3100 Series 10GbE PCIe I/O | |
11 | * Virtualized Server Adapter. | |
12 | * Copyright(c) 2002-2009 Neterion Inc. | |
13 | * | |
14 | * The module loadable parameters that are supported by the driver and a brief | |
15 | * explanation of all the variables: | |
16 | * vlan_tag_strip: | |
17 | * Strip VLAN Tag enable/disable. Instructs the device to remove | |
18 | * the VLAN tag from all received tagged frames that are not | |
19 | * replicated at the internal L2 switch. | |
20 | * 0 - Do not strip the VLAN tag. | |
21 | * 1 - Strip the VLAN tag. | |
22 | * | |
23 | * addr_learn_en: | |
24 | * Enable learning the mac address of the guest OS interface in | |
25 | * a virtualization environment. | |
26 | * 0 - DISABLE | |
27 | * 1 - ENABLE | |
28 | * | |
29 | * max_config_port: | |
30 | * Maximum number of port to be supported. | |
31 | * MIN -1 and MAX - 2 | |
32 | * | |
33 | * max_config_vpath: | |
34 | * This configures the maximum no of VPATH configures for each | |
35 | * device function. | |
36 | * MIN - 1 and MAX - 17 | |
37 | * | |
38 | * max_config_dev: | |
39 | * This configures maximum no of Device function to be enabled. | |
40 | * MIN - 1 and MAX - 17 | |
41 | * | |
42 | ******************************************************************************/ | |
43 | ||
44 | #include <linux/if_vlan.h> | |
45 | #include <linux/pci.h> | |
5a0e3ad6 | 46 | #include <linux/slab.h> |
2b05e002 | 47 | #include <linux/tcp.h> |
703da5a1 RV |
48 | #include <net/ip.h> |
49 | #include <linux/netdevice.h> | |
50 | #include <linux/etherdevice.h> | |
51 | #include "vxge-main.h" | |
52 | #include "vxge-reg.h" | |
53 | ||
54 | MODULE_LICENSE("Dual BSD/GPL"); | |
55 | MODULE_DESCRIPTION("Neterion's X3100 Series 10GbE PCIe I/O" | |
56 | "Virtualized Server Adapter"); | |
57 | ||
a3aa1884 | 58 | static DEFINE_PCI_DEVICE_TABLE(vxge_id_table) = { |
703da5a1 RV |
59 | {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_TITAN_WIN, PCI_ANY_ID, |
60 | PCI_ANY_ID}, | |
61 | {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_TITAN_UNI, PCI_ANY_ID, | |
62 | PCI_ANY_ID}, | |
63 | {0} | |
64 | }; | |
65 | ||
66 | MODULE_DEVICE_TABLE(pci, vxge_id_table); | |
67 | ||
68 | VXGE_MODULE_PARAM_INT(vlan_tag_strip, VXGE_HW_VPATH_RPA_STRIP_VLAN_TAG_ENABLE); | |
69 | VXGE_MODULE_PARAM_INT(addr_learn_en, VXGE_HW_MAC_ADDR_LEARN_DEFAULT); | |
70 | VXGE_MODULE_PARAM_INT(max_config_port, VXGE_MAX_CONFIG_PORT); | |
71 | VXGE_MODULE_PARAM_INT(max_config_vpath, VXGE_USE_DEFAULT); | |
72 | VXGE_MODULE_PARAM_INT(max_mac_vpath, VXGE_MAX_MAC_ADDR_COUNT); | |
73 | VXGE_MODULE_PARAM_INT(max_config_dev, VXGE_MAX_CONFIG_DEV); | |
74 | ||
75 | static u16 vpath_selector[VXGE_HW_MAX_VIRTUAL_PATHS] = | |
76 | {0, 1, 3, 3, 7, 7, 7, 7, 15, 15, 15, 15, 15, 15, 15, 15, 31}; | |
77 | static unsigned int bw_percentage[VXGE_HW_MAX_VIRTUAL_PATHS] = | |
78 | {[0 ...(VXGE_HW_MAX_VIRTUAL_PATHS - 1)] = 0xFF}; | |
79 | module_param_array(bw_percentage, uint, NULL, 0); | |
80 | ||
81 | static struct vxge_drv_config *driver_config; | |
82 | ||
83 | static inline int is_vxge_card_up(struct vxgedev *vdev) | |
84 | { | |
85 | return test_bit(__VXGE_STATE_CARD_UP, &vdev->state); | |
86 | } | |
87 | ||
88 | static inline void VXGE_COMPLETE_VPATH_TX(struct vxge_fifo *fifo) | |
89 | { | |
90 | unsigned long flags = 0; | |
ff67df55 BL |
91 | struct sk_buff **skb_ptr = NULL; |
92 | struct sk_buff **temp; | |
93 | #define NR_SKB_COMPLETED 128 | |
94 | struct sk_buff *completed[NR_SKB_COMPLETED]; | |
95 | int more; | |
703da5a1 | 96 | |
ff67df55 BL |
97 | do { |
98 | more = 0; | |
99 | skb_ptr = completed; | |
100 | ||
101 | if (spin_trylock_irqsave(&fifo->tx_lock, flags)) { | |
102 | vxge_hw_vpath_poll_tx(fifo->handle, &skb_ptr, | |
103 | NR_SKB_COMPLETED, &more); | |
104 | spin_unlock_irqrestore(&fifo->tx_lock, flags); | |
105 | } | |
106 | /* free SKBs */ | |
107 | for (temp = completed; temp != skb_ptr; temp++) | |
108 | dev_kfree_skb_irq(*temp); | |
109 | } while (more) ; | |
703da5a1 RV |
110 | } |
111 | ||
112 | static inline void VXGE_COMPLETE_ALL_TX(struct vxgedev *vdev) | |
113 | { | |
114 | int i; | |
115 | ||
116 | /* Complete all transmits */ | |
117 | for (i = 0; i < vdev->no_of_vpath; i++) | |
118 | VXGE_COMPLETE_VPATH_TX(&vdev->vpaths[i].fifo); | |
119 | } | |
120 | ||
121 | static inline void VXGE_COMPLETE_ALL_RX(struct vxgedev *vdev) | |
122 | { | |
123 | int i; | |
124 | struct vxge_ring *ring; | |
125 | ||
126 | /* Complete all receives*/ | |
127 | for (i = 0; i < vdev->no_of_vpath; i++) { | |
128 | ring = &vdev->vpaths[i].ring; | |
129 | vxge_hw_vpath_poll_rx(ring->handle); | |
130 | } | |
131 | } | |
132 | ||
133 | /* | |
134 | * MultiQ manipulation helper functions | |
135 | */ | |
136 | void vxge_stop_all_tx_queue(struct vxgedev *vdev) | |
137 | { | |
138 | int i; | |
139 | struct net_device *dev = vdev->ndev; | |
140 | ||
141 | if (vdev->config.tx_steering_type != TX_MULTIQ_STEERING) { | |
142 | for (i = 0; i < vdev->no_of_vpath; i++) | |
143 | vdev->vpaths[i].fifo.queue_state = VPATH_QUEUE_STOP; | |
144 | } | |
145 | netif_tx_stop_all_queues(dev); | |
146 | } | |
147 | ||
148 | void vxge_stop_tx_queue(struct vxge_fifo *fifo) | |
149 | { | |
150 | struct net_device *dev = fifo->ndev; | |
151 | ||
152 | struct netdev_queue *txq = NULL; | |
153 | if (fifo->tx_steering_type == TX_MULTIQ_STEERING) | |
154 | txq = netdev_get_tx_queue(dev, fifo->driver_id); | |
155 | else { | |
156 | txq = netdev_get_tx_queue(dev, 0); | |
157 | fifo->queue_state = VPATH_QUEUE_STOP; | |
158 | } | |
159 | ||
160 | netif_tx_stop_queue(txq); | |
161 | } | |
162 | ||
163 | void vxge_start_all_tx_queue(struct vxgedev *vdev) | |
164 | { | |
165 | int i; | |
166 | struct net_device *dev = vdev->ndev; | |
167 | ||
168 | if (vdev->config.tx_steering_type != TX_MULTIQ_STEERING) { | |
169 | for (i = 0; i < vdev->no_of_vpath; i++) | |
170 | vdev->vpaths[i].fifo.queue_state = VPATH_QUEUE_START; | |
171 | } | |
172 | netif_tx_start_all_queues(dev); | |
173 | } | |
174 | ||
175 | static void vxge_wake_all_tx_queue(struct vxgedev *vdev) | |
176 | { | |
177 | int i; | |
178 | struct net_device *dev = vdev->ndev; | |
179 | ||
180 | if (vdev->config.tx_steering_type != TX_MULTIQ_STEERING) { | |
181 | for (i = 0; i < vdev->no_of_vpath; i++) | |
182 | vdev->vpaths[i].fifo.queue_state = VPATH_QUEUE_START; | |
183 | } | |
184 | netif_tx_wake_all_queues(dev); | |
185 | } | |
186 | ||
187 | void vxge_wake_tx_queue(struct vxge_fifo *fifo, struct sk_buff *skb) | |
188 | { | |
189 | struct net_device *dev = fifo->ndev; | |
190 | ||
191 | int vpath_no = fifo->driver_id; | |
192 | struct netdev_queue *txq = NULL; | |
193 | if (fifo->tx_steering_type == TX_MULTIQ_STEERING) { | |
194 | txq = netdev_get_tx_queue(dev, vpath_no); | |
195 | if (netif_tx_queue_stopped(txq)) | |
196 | netif_tx_wake_queue(txq); | |
197 | } else { | |
198 | txq = netdev_get_tx_queue(dev, 0); | |
199 | if (fifo->queue_state == VPATH_QUEUE_STOP) | |
200 | if (netif_tx_queue_stopped(txq)) { | |
201 | fifo->queue_state = VPATH_QUEUE_START; | |
202 | netif_tx_wake_queue(txq); | |
203 | } | |
204 | } | |
205 | } | |
206 | ||
207 | /* | |
208 | * vxge_callback_link_up | |
209 | * | |
210 | * This function is called during interrupt context to notify link up state | |
211 | * change. | |
212 | */ | |
213 | void | |
214 | vxge_callback_link_up(struct __vxge_hw_device *hldev) | |
215 | { | |
216 | struct net_device *dev = hldev->ndev; | |
217 | struct vxgedev *vdev = (struct vxgedev *)netdev_priv(dev); | |
218 | ||
219 | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | |
220 | vdev->ndev->name, __func__, __LINE__); | |
221 | printk(KERN_NOTICE "%s: Link Up\n", vdev->ndev->name); | |
222 | vdev->stats.link_up++; | |
223 | ||
224 | netif_carrier_on(vdev->ndev); | |
225 | vxge_wake_all_tx_queue(vdev); | |
226 | ||
227 | vxge_debug_entryexit(VXGE_TRACE, | |
228 | "%s: %s:%d Exiting...", vdev->ndev->name, __func__, __LINE__); | |
229 | } | |
230 | ||
231 | /* | |
232 | * vxge_callback_link_down | |
233 | * | |
234 | * This function is called during interrupt context to notify link down state | |
235 | * change. | |
236 | */ | |
237 | void | |
238 | vxge_callback_link_down(struct __vxge_hw_device *hldev) | |
239 | { | |
240 | struct net_device *dev = hldev->ndev; | |
241 | struct vxgedev *vdev = (struct vxgedev *)netdev_priv(dev); | |
242 | ||
243 | vxge_debug_entryexit(VXGE_TRACE, | |
244 | "%s: %s:%d", vdev->ndev->name, __func__, __LINE__); | |
245 | printk(KERN_NOTICE "%s: Link Down\n", vdev->ndev->name); | |
246 | ||
247 | vdev->stats.link_down++; | |
248 | netif_carrier_off(vdev->ndev); | |
249 | vxge_stop_all_tx_queue(vdev); | |
250 | ||
251 | vxge_debug_entryexit(VXGE_TRACE, | |
252 | "%s: %s:%d Exiting...", vdev->ndev->name, __func__, __LINE__); | |
253 | } | |
254 | ||
255 | /* | |
256 | * vxge_rx_alloc | |
257 | * | |
258 | * Allocate SKB. | |
259 | */ | |
260 | static struct sk_buff* | |
261 | vxge_rx_alloc(void *dtrh, struct vxge_ring *ring, const int skb_size) | |
262 | { | |
263 | struct net_device *dev; | |
264 | struct sk_buff *skb; | |
265 | struct vxge_rx_priv *rx_priv; | |
266 | ||
267 | dev = ring->ndev; | |
268 | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | |
269 | ring->ndev->name, __func__, __LINE__); | |
270 | ||
271 | rx_priv = vxge_hw_ring_rxd_private_get(dtrh); | |
272 | ||
273 | /* try to allocate skb first. this one may fail */ | |
274 | skb = netdev_alloc_skb(dev, skb_size + | |
275 | VXGE_HW_HEADER_ETHERNET_II_802_3_ALIGN); | |
276 | if (skb == NULL) { | |
277 | vxge_debug_mem(VXGE_ERR, | |
278 | "%s: out of memory to allocate SKB", dev->name); | |
279 | ring->stats.skb_alloc_fail++; | |
280 | return NULL; | |
281 | } | |
282 | ||
283 | vxge_debug_mem(VXGE_TRACE, | |
284 | "%s: %s:%d Skb : 0x%p", ring->ndev->name, | |
285 | __func__, __LINE__, skb); | |
286 | ||
287 | skb_reserve(skb, VXGE_HW_HEADER_ETHERNET_II_802_3_ALIGN); | |
288 | ||
289 | rx_priv->skb = skb; | |
ea11bbe0 | 290 | rx_priv->skb_data = NULL; |
703da5a1 RV |
291 | rx_priv->data_size = skb_size; |
292 | vxge_debug_entryexit(VXGE_TRACE, | |
293 | "%s: %s:%d Exiting...", ring->ndev->name, __func__, __LINE__); | |
294 | ||
295 | return skb; | |
296 | } | |
297 | ||
298 | /* | |
299 | * vxge_rx_map | |
300 | */ | |
301 | static int vxge_rx_map(void *dtrh, struct vxge_ring *ring) | |
302 | { | |
303 | struct vxge_rx_priv *rx_priv; | |
304 | dma_addr_t dma_addr; | |
305 | ||
306 | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | |
307 | ring->ndev->name, __func__, __LINE__); | |
308 | rx_priv = vxge_hw_ring_rxd_private_get(dtrh); | |
309 | ||
ea11bbe0 BL |
310 | rx_priv->skb_data = rx_priv->skb->data; |
311 | dma_addr = pci_map_single(ring->pdev, rx_priv->skb_data, | |
703da5a1 RV |
312 | rx_priv->data_size, PCI_DMA_FROMDEVICE); |
313 | ||
fa15e99b | 314 | if (unlikely(pci_dma_mapping_error(ring->pdev, dma_addr))) { |
703da5a1 RV |
315 | ring->stats.pci_map_fail++; |
316 | return -EIO; | |
317 | } | |
318 | vxge_debug_mem(VXGE_TRACE, | |
319 | "%s: %s:%d 1 buffer mode dma_addr = 0x%llx", | |
320 | ring->ndev->name, __func__, __LINE__, | |
321 | (unsigned long long)dma_addr); | |
322 | vxge_hw_ring_rxd_1b_set(dtrh, dma_addr, rx_priv->data_size); | |
323 | ||
324 | rx_priv->data_dma = dma_addr; | |
325 | vxge_debug_entryexit(VXGE_TRACE, | |
326 | "%s: %s:%d Exiting...", ring->ndev->name, __func__, __LINE__); | |
327 | ||
328 | return 0; | |
329 | } | |
330 | ||
331 | /* | |
332 | * vxge_rx_initial_replenish | |
333 | * Allocation of RxD as an initial replenish procedure. | |
334 | */ | |
335 | static enum vxge_hw_status | |
336 | vxge_rx_initial_replenish(void *dtrh, void *userdata) | |
337 | { | |
338 | struct vxge_ring *ring = (struct vxge_ring *)userdata; | |
339 | struct vxge_rx_priv *rx_priv; | |
340 | ||
341 | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | |
342 | ring->ndev->name, __func__, __LINE__); | |
343 | if (vxge_rx_alloc(dtrh, ring, | |
344 | VXGE_LL_MAX_FRAME_SIZE(ring->ndev)) == NULL) | |
345 | return VXGE_HW_FAIL; | |
346 | ||
347 | if (vxge_rx_map(dtrh, ring)) { | |
348 | rx_priv = vxge_hw_ring_rxd_private_get(dtrh); | |
349 | dev_kfree_skb(rx_priv->skb); | |
350 | ||
351 | return VXGE_HW_FAIL; | |
352 | } | |
353 | vxge_debug_entryexit(VXGE_TRACE, | |
354 | "%s: %s:%d Exiting...", ring->ndev->name, __func__, __LINE__); | |
355 | ||
356 | return VXGE_HW_OK; | |
357 | } | |
358 | ||
359 | static inline void | |
360 | vxge_rx_complete(struct vxge_ring *ring, struct sk_buff *skb, u16 vlan, | |
361 | int pkt_length, struct vxge_hw_ring_rxd_info *ext_info) | |
362 | { | |
363 | ||
364 | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | |
365 | ring->ndev->name, __func__, __LINE__); | |
366 | skb_record_rx_queue(skb, ring->driver_id); | |
367 | skb->protocol = eth_type_trans(skb, ring->ndev); | |
368 | ||
369 | ring->stats.rx_frms++; | |
370 | ring->stats.rx_bytes += pkt_length; | |
371 | ||
372 | if (skb->pkt_type == PACKET_MULTICAST) | |
373 | ring->stats.rx_mcast++; | |
374 | ||
375 | vxge_debug_rx(VXGE_TRACE, | |
376 | "%s: %s:%d skb protocol = %d", | |
377 | ring->ndev->name, __func__, __LINE__, skb->protocol); | |
378 | ||
379 | if (ring->gro_enable) { | |
380 | if (ring->vlgrp && ext_info->vlan && | |
381 | (ring->vlan_tag_strip == | |
382 | VXGE_HW_VPATH_RPA_STRIP_VLAN_TAG_ENABLE)) | |
a5d165b5 | 383 | vlan_gro_receive(ring->napi_p, ring->vlgrp, |
703da5a1 RV |
384 | ext_info->vlan, skb); |
385 | else | |
a5d165b5 | 386 | napi_gro_receive(ring->napi_p, skb); |
703da5a1 RV |
387 | } else { |
388 | if (ring->vlgrp && vlan && | |
389 | (ring->vlan_tag_strip == | |
390 | VXGE_HW_VPATH_RPA_STRIP_VLAN_TAG_ENABLE)) | |
391 | vlan_hwaccel_receive_skb(skb, ring->vlgrp, vlan); | |
392 | else | |
393 | netif_receive_skb(skb); | |
394 | } | |
395 | vxge_debug_entryexit(VXGE_TRACE, | |
396 | "%s: %s:%d Exiting...", ring->ndev->name, __func__, __LINE__); | |
397 | } | |
398 | ||
399 | static inline void vxge_re_pre_post(void *dtr, struct vxge_ring *ring, | |
400 | struct vxge_rx_priv *rx_priv) | |
401 | { | |
402 | pci_dma_sync_single_for_device(ring->pdev, | |
403 | rx_priv->data_dma, rx_priv->data_size, PCI_DMA_FROMDEVICE); | |
404 | ||
405 | vxge_hw_ring_rxd_1b_set(dtr, rx_priv->data_dma, rx_priv->data_size); | |
406 | vxge_hw_ring_rxd_pre_post(ring->handle, dtr); | |
407 | } | |
408 | ||
409 | static inline void vxge_post(int *dtr_cnt, void **first_dtr, | |
410 | void *post_dtr, struct __vxge_hw_ring *ringh) | |
411 | { | |
412 | int dtr_count = *dtr_cnt; | |
413 | if ((*dtr_cnt % VXGE_HW_RXSYNC_FREQ_CNT) == 0) { | |
414 | if (*first_dtr) | |
415 | vxge_hw_ring_rxd_post_post_wmb(ringh, *first_dtr); | |
416 | *first_dtr = post_dtr; | |
417 | } else | |
418 | vxge_hw_ring_rxd_post_post(ringh, post_dtr); | |
419 | dtr_count++; | |
420 | *dtr_cnt = dtr_count; | |
421 | } | |
422 | ||
423 | /* | |
424 | * vxge_rx_1b_compl | |
425 | * | |
426 | * If the interrupt is because of a received frame or if the receive ring | |
427 | * contains fresh as yet un-processed frames, this function is called. | |
428 | */ | |
429 | enum vxge_hw_status | |
430 | vxge_rx_1b_compl(struct __vxge_hw_ring *ringh, void *dtr, | |
431 | u8 t_code, void *userdata) | |
432 | { | |
433 | struct vxge_ring *ring = (struct vxge_ring *)userdata; | |
434 | struct net_device *dev = ring->ndev; | |
435 | unsigned int dma_sizes; | |
436 | void *first_dtr = NULL; | |
437 | int dtr_cnt = 0; | |
438 | int data_size; | |
439 | dma_addr_t data_dma; | |
440 | int pkt_length; | |
441 | struct sk_buff *skb; | |
442 | struct vxge_rx_priv *rx_priv; | |
443 | struct vxge_hw_ring_rxd_info ext_info; | |
444 | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | |
445 | ring->ndev->name, __func__, __LINE__); | |
446 | ring->pkts_processed = 0; | |
447 | ||
3363276f | 448 | vxge_hw_ring_replenish(ringh); |
703da5a1 RV |
449 | |
450 | do { | |
3f23e436 | 451 | prefetch((char *)dtr + L1_CACHE_BYTES); |
703da5a1 RV |
452 | rx_priv = vxge_hw_ring_rxd_private_get(dtr); |
453 | skb = rx_priv->skb; | |
454 | data_size = rx_priv->data_size; | |
455 | data_dma = rx_priv->data_dma; | |
ea11bbe0 | 456 | prefetch(rx_priv->skb_data); |
703da5a1 RV |
457 | |
458 | vxge_debug_rx(VXGE_TRACE, | |
459 | "%s: %s:%d skb = 0x%p", | |
460 | ring->ndev->name, __func__, __LINE__, skb); | |
461 | ||
462 | vxge_hw_ring_rxd_1b_get(ringh, dtr, &dma_sizes); | |
463 | pkt_length = dma_sizes; | |
464 | ||
22fa125e SH |
465 | pkt_length -= ETH_FCS_LEN; |
466 | ||
703da5a1 RV |
467 | vxge_debug_rx(VXGE_TRACE, |
468 | "%s: %s:%d Packet Length = %d", | |
469 | ring->ndev->name, __func__, __LINE__, pkt_length); | |
470 | ||
471 | vxge_hw_ring_rxd_1b_info_get(ringh, dtr, &ext_info); | |
472 | ||
473 | /* check skb validity */ | |
474 | vxge_assert(skb); | |
475 | ||
476 | prefetch((char *)skb + L1_CACHE_BYTES); | |
477 | if (unlikely(t_code)) { | |
478 | ||
479 | if (vxge_hw_ring_handle_tcode(ringh, dtr, t_code) != | |
480 | VXGE_HW_OK) { | |
481 | ||
482 | ring->stats.rx_errors++; | |
483 | vxge_debug_rx(VXGE_TRACE, | |
484 | "%s: %s :%d Rx T_code is %d", | |
485 | ring->ndev->name, __func__, | |
486 | __LINE__, t_code); | |
487 | ||
488 | /* If the t_code is not supported and if the | |
489 | * t_code is other than 0x5 (unparseable packet | |
490 | * such as unknown UPV6 header), Drop it !!! | |
491 | */ | |
492 | vxge_re_pre_post(dtr, ring, rx_priv); | |
493 | ||
494 | vxge_post(&dtr_cnt, &first_dtr, dtr, ringh); | |
495 | ring->stats.rx_dropped++; | |
496 | continue; | |
497 | } | |
498 | } | |
499 | ||
500 | if (pkt_length > VXGE_LL_RX_COPY_THRESHOLD) { | |
501 | ||
502 | if (vxge_rx_alloc(dtr, ring, data_size) != NULL) { | |
503 | ||
504 | if (!vxge_rx_map(dtr, ring)) { | |
505 | skb_put(skb, pkt_length); | |
506 | ||
507 | pci_unmap_single(ring->pdev, data_dma, | |
508 | data_size, PCI_DMA_FROMDEVICE); | |
509 | ||
510 | vxge_hw_ring_rxd_pre_post(ringh, dtr); | |
511 | vxge_post(&dtr_cnt, &first_dtr, dtr, | |
512 | ringh); | |
513 | } else { | |
514 | dev_kfree_skb(rx_priv->skb); | |
515 | rx_priv->skb = skb; | |
516 | rx_priv->data_size = data_size; | |
517 | vxge_re_pre_post(dtr, ring, rx_priv); | |
518 | ||
519 | vxge_post(&dtr_cnt, &first_dtr, dtr, | |
520 | ringh); | |
521 | ring->stats.rx_dropped++; | |
522 | break; | |
523 | } | |
524 | } else { | |
525 | vxge_re_pre_post(dtr, ring, rx_priv); | |
526 | ||
527 | vxge_post(&dtr_cnt, &first_dtr, dtr, ringh); | |
528 | ring->stats.rx_dropped++; | |
529 | break; | |
530 | } | |
531 | } else { | |
532 | struct sk_buff *skb_up; | |
533 | ||
534 | skb_up = netdev_alloc_skb(dev, pkt_length + | |
535 | VXGE_HW_HEADER_ETHERNET_II_802_3_ALIGN); | |
536 | if (skb_up != NULL) { | |
537 | skb_reserve(skb_up, | |
538 | VXGE_HW_HEADER_ETHERNET_II_802_3_ALIGN); | |
539 | ||
540 | pci_dma_sync_single_for_cpu(ring->pdev, | |
541 | data_dma, data_size, | |
542 | PCI_DMA_FROMDEVICE); | |
543 | ||
544 | vxge_debug_mem(VXGE_TRACE, | |
545 | "%s: %s:%d skb_up = %p", | |
546 | ring->ndev->name, __func__, | |
547 | __LINE__, skb); | |
548 | memcpy(skb_up->data, skb->data, pkt_length); | |
549 | ||
550 | vxge_re_pre_post(dtr, ring, rx_priv); | |
551 | ||
552 | vxge_post(&dtr_cnt, &first_dtr, dtr, | |
553 | ringh); | |
554 | /* will netif_rx small SKB instead */ | |
555 | skb = skb_up; | |
556 | skb_put(skb, pkt_length); | |
557 | } else { | |
558 | vxge_re_pre_post(dtr, ring, rx_priv); | |
559 | ||
560 | vxge_post(&dtr_cnt, &first_dtr, dtr, ringh); | |
561 | vxge_debug_rx(VXGE_ERR, | |
562 | "%s: vxge_rx_1b_compl: out of " | |
563 | "memory", dev->name); | |
564 | ring->stats.skb_alloc_fail++; | |
565 | break; | |
566 | } | |
567 | } | |
568 | ||
569 | if ((ext_info.proto & VXGE_HW_FRAME_PROTO_TCP_OR_UDP) && | |
570 | !(ext_info.proto & VXGE_HW_FRAME_PROTO_IP_FRAG) && | |
571 | ring->rx_csum && /* Offload Rx side CSUM */ | |
572 | ext_info.l3_cksum == VXGE_HW_L3_CKSUM_OK && | |
573 | ext_info.l4_cksum == VXGE_HW_L4_CKSUM_OK) | |
574 | skb->ip_summed = CHECKSUM_UNNECESSARY; | |
575 | else | |
576 | skb->ip_summed = CHECKSUM_NONE; | |
577 | ||
578 | vxge_rx_complete(ring, skb, ext_info.vlan, | |
579 | pkt_length, &ext_info); | |
580 | ||
581 | ring->budget--; | |
582 | ring->pkts_processed++; | |
583 | if (!ring->budget) | |
584 | break; | |
585 | ||
586 | } while (vxge_hw_ring_rxd_next_completed(ringh, &dtr, | |
587 | &t_code) == VXGE_HW_OK); | |
588 | ||
589 | if (first_dtr) | |
590 | vxge_hw_ring_rxd_post_post_wmb(ringh, first_dtr); | |
591 | ||
703da5a1 RV |
592 | vxge_debug_entryexit(VXGE_TRACE, |
593 | "%s:%d Exiting...", | |
594 | __func__, __LINE__); | |
595 | return VXGE_HW_OK; | |
596 | } | |
597 | ||
598 | /* | |
599 | * vxge_xmit_compl | |
600 | * | |
601 | * If an interrupt was raised to indicate DMA complete of the Tx packet, | |
602 | * this function is called. It identifies the last TxD whose buffer was | |
603 | * freed and frees all skbs whose data have already DMA'ed into the NICs | |
604 | * internal memory. | |
605 | */ | |
606 | enum vxge_hw_status | |
607 | vxge_xmit_compl(struct __vxge_hw_fifo *fifo_hw, void *dtr, | |
608 | enum vxge_hw_fifo_tcode t_code, void *userdata, | |
ff67df55 | 609 | struct sk_buff ***skb_ptr, int nr_skb, int *more) |
703da5a1 RV |
610 | { |
611 | struct vxge_fifo *fifo = (struct vxge_fifo *)userdata; | |
ff67df55 | 612 | struct sk_buff *skb, **done_skb = *skb_ptr; |
703da5a1 RV |
613 | int pkt_cnt = 0; |
614 | ||
615 | vxge_debug_entryexit(VXGE_TRACE, | |
616 | "%s:%d Entered....", __func__, __LINE__); | |
617 | ||
618 | do { | |
619 | int frg_cnt; | |
620 | skb_frag_t *frag; | |
621 | int i = 0, j; | |
622 | struct vxge_tx_priv *txd_priv = | |
623 | vxge_hw_fifo_txdl_private_get(dtr); | |
624 | ||
625 | skb = txd_priv->skb; | |
626 | frg_cnt = skb_shinfo(skb)->nr_frags; | |
627 | frag = &skb_shinfo(skb)->frags[0]; | |
628 | ||
629 | vxge_debug_tx(VXGE_TRACE, | |
630 | "%s: %s:%d fifo_hw = %p dtr = %p " | |
631 | "tcode = 0x%x", fifo->ndev->name, __func__, | |
632 | __LINE__, fifo_hw, dtr, t_code); | |
633 | /* check skb validity */ | |
634 | vxge_assert(skb); | |
635 | vxge_debug_tx(VXGE_TRACE, | |
636 | "%s: %s:%d skb = %p itxd_priv = %p frg_cnt = %d", | |
637 | fifo->ndev->name, __func__, __LINE__, | |
638 | skb, txd_priv, frg_cnt); | |
639 | if (unlikely(t_code)) { | |
640 | fifo->stats.tx_errors++; | |
641 | vxge_debug_tx(VXGE_ERR, | |
642 | "%s: tx: dtr %p completed due to " | |
643 | "error t_code %01x", fifo->ndev->name, | |
644 | dtr, t_code); | |
645 | vxge_hw_fifo_handle_tcode(fifo_hw, dtr, t_code); | |
646 | } | |
647 | ||
648 | /* for unfragmented skb */ | |
649 | pci_unmap_single(fifo->pdev, txd_priv->dma_buffers[i++], | |
650 | skb_headlen(skb), PCI_DMA_TODEVICE); | |
651 | ||
652 | for (j = 0; j < frg_cnt; j++) { | |
653 | pci_unmap_page(fifo->pdev, | |
654 | txd_priv->dma_buffers[i++], | |
655 | frag->size, PCI_DMA_TODEVICE); | |
656 | frag += 1; | |
657 | } | |
658 | ||
659 | vxge_hw_fifo_txdl_free(fifo_hw, dtr); | |
660 | ||
661 | /* Updating the statistics block */ | |
662 | fifo->stats.tx_frms++; | |
663 | fifo->stats.tx_bytes += skb->len; | |
664 | ||
ff67df55 BL |
665 | *done_skb++ = skb; |
666 | ||
667 | if (--nr_skb <= 0) { | |
668 | *more = 1; | |
669 | break; | |
670 | } | |
703da5a1 RV |
671 | |
672 | pkt_cnt++; | |
673 | if (pkt_cnt > fifo->indicate_max_pkts) | |
674 | break; | |
675 | ||
676 | } while (vxge_hw_fifo_txdl_next_completed(fifo_hw, | |
677 | &dtr, &t_code) == VXGE_HW_OK); | |
678 | ||
ff67df55 | 679 | *skb_ptr = done_skb; |
703da5a1 RV |
680 | vxge_wake_tx_queue(fifo, skb); |
681 | ||
703da5a1 RV |
682 | vxge_debug_entryexit(VXGE_TRACE, |
683 | "%s: %s:%d Exiting...", | |
684 | fifo->ndev->name, __func__, __LINE__); | |
685 | return VXGE_HW_OK; | |
686 | } | |
687 | ||
28679751 | 688 | /* select a vpath to transmit the packet */ |
703da5a1 RV |
689 | static u32 vxge_get_vpath_no(struct vxgedev *vdev, struct sk_buff *skb, |
690 | int *do_lock) | |
691 | { | |
692 | u16 queue_len, counter = 0; | |
693 | if (skb->protocol == htons(ETH_P_IP)) { | |
694 | struct iphdr *ip; | |
695 | struct tcphdr *th; | |
696 | ||
697 | ip = ip_hdr(skb); | |
698 | ||
699 | if ((ip->frag_off & htons(IP_OFFSET|IP_MF)) == 0) { | |
700 | th = (struct tcphdr *)(((unsigned char *)ip) + | |
701 | ip->ihl*4); | |
702 | ||
703 | queue_len = vdev->no_of_vpath; | |
704 | counter = (ntohs(th->source) + | |
705 | ntohs(th->dest)) & | |
706 | vdev->vpath_selector[queue_len - 1]; | |
707 | if (counter >= queue_len) | |
708 | counter = queue_len - 1; | |
709 | ||
710 | if (ip->protocol == IPPROTO_UDP) { | |
711 | #ifdef NETIF_F_LLTX | |
712 | *do_lock = 0; | |
713 | #endif | |
714 | } | |
715 | } | |
716 | } | |
717 | return counter; | |
718 | } | |
719 | ||
720 | static enum vxge_hw_status vxge_search_mac_addr_in_list( | |
721 | struct vxge_vpath *vpath, u64 del_mac) | |
722 | { | |
723 | struct list_head *entry, *next; | |
724 | list_for_each_safe(entry, next, &vpath->mac_addr_list) { | |
725 | if (((struct vxge_mac_addrs *)entry)->macaddr == del_mac) | |
726 | return TRUE; | |
727 | } | |
728 | return FALSE; | |
729 | } | |
730 | ||
731 | static int vxge_learn_mac(struct vxgedev *vdev, u8 *mac_header) | |
732 | { | |
733 | struct macInfo mac_info; | |
734 | u8 *mac_address = NULL; | |
735 | u64 mac_addr = 0, vpath_vector = 0; | |
736 | int vpath_idx = 0; | |
737 | enum vxge_hw_status status = VXGE_HW_OK; | |
738 | struct vxge_vpath *vpath = NULL; | |
739 | struct __vxge_hw_device *hldev; | |
740 | ||
741 | hldev = (struct __vxge_hw_device *) pci_get_drvdata(vdev->pdev); | |
742 | ||
743 | mac_address = (u8 *)&mac_addr; | |
744 | memcpy(mac_address, mac_header, ETH_ALEN); | |
745 | ||
746 | /* Is this mac address already in the list? */ | |
747 | for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; vpath_idx++) { | |
748 | vpath = &vdev->vpaths[vpath_idx]; | |
749 | if (vxge_search_mac_addr_in_list(vpath, mac_addr)) | |
750 | return vpath_idx; | |
751 | } | |
752 | ||
753 | memset(&mac_info, 0, sizeof(struct macInfo)); | |
754 | memcpy(mac_info.macaddr, mac_header, ETH_ALEN); | |
755 | ||
756 | /* Any vpath has room to add mac address to its da table? */ | |
757 | for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; vpath_idx++) { | |
758 | vpath = &vdev->vpaths[vpath_idx]; | |
759 | if (vpath->mac_addr_cnt < vpath->max_mac_addr_cnt) { | |
760 | /* Add this mac address to this vpath */ | |
761 | mac_info.vpath_no = vpath_idx; | |
762 | mac_info.state = VXGE_LL_MAC_ADDR_IN_DA_TABLE; | |
763 | status = vxge_add_mac_addr(vdev, &mac_info); | |
764 | if (status != VXGE_HW_OK) | |
765 | return -EPERM; | |
766 | return vpath_idx; | |
767 | } | |
768 | } | |
769 | ||
770 | mac_info.state = VXGE_LL_MAC_ADDR_IN_LIST; | |
771 | vpath_idx = 0; | |
772 | mac_info.vpath_no = vpath_idx; | |
773 | /* Is the first vpath already selected as catch-basin ? */ | |
774 | vpath = &vdev->vpaths[vpath_idx]; | |
775 | if (vpath->mac_addr_cnt > vpath->max_mac_addr_cnt) { | |
776 | /* Add this mac address to this vpath */ | |
777 | if (FALSE == vxge_mac_list_add(vpath, &mac_info)) | |
778 | return -EPERM; | |
779 | return vpath_idx; | |
780 | } | |
781 | ||
782 | /* Select first vpath as catch-basin */ | |
783 | vpath_vector = vxge_mBIT(vpath->device_id); | |
784 | status = vxge_hw_mgmt_reg_write(vpath->vdev->devh, | |
785 | vxge_hw_mgmt_reg_type_mrpcim, | |
786 | 0, | |
787 | (ulong)offsetof( | |
788 | struct vxge_hw_mrpcim_reg, | |
789 | rts_mgr_cbasin_cfg), | |
790 | vpath_vector); | |
791 | if (status != VXGE_HW_OK) { | |
792 | vxge_debug_tx(VXGE_ERR, | |
793 | "%s: Unable to set the vpath-%d in catch-basin mode", | |
794 | VXGE_DRIVER_NAME, vpath->device_id); | |
795 | return -EPERM; | |
796 | } | |
797 | ||
798 | if (FALSE == vxge_mac_list_add(vpath, &mac_info)) | |
799 | return -EPERM; | |
800 | ||
801 | return vpath_idx; | |
802 | } | |
803 | ||
804 | /** | |
805 | * vxge_xmit | |
806 | * @skb : the socket buffer containing the Tx data. | |
807 | * @dev : device pointer. | |
808 | * | |
809 | * This function is the Tx entry point of the driver. Neterion NIC supports | |
810 | * certain protocol assist features on Tx side, namely CSO, S/G, LSO. | |
811 | * NOTE: when device cant queue the pkt, just the trans_start variable will | |
812 | * not be upadted. | |
813 | */ | |
61357325 | 814 | static netdev_tx_t |
703da5a1 RV |
815 | vxge_xmit(struct sk_buff *skb, struct net_device *dev) |
816 | { | |
817 | struct vxge_fifo *fifo = NULL; | |
818 | void *dtr_priv; | |
819 | void *dtr = NULL; | |
820 | struct vxgedev *vdev = NULL; | |
821 | enum vxge_hw_status status; | |
822 | int frg_cnt, first_frg_len; | |
823 | skb_frag_t *frag; | |
824 | int i = 0, j = 0, avail; | |
825 | u64 dma_pointer; | |
826 | struct vxge_tx_priv *txdl_priv = NULL; | |
827 | struct __vxge_hw_fifo *fifo_hw; | |
703da5a1 RV |
828 | int offload_type; |
829 | unsigned long flags = 0; | |
830 | int vpath_no = 0; | |
831 | int do_spin_tx_lock = 1; | |
832 | ||
833 | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | |
834 | dev->name, __func__, __LINE__); | |
835 | ||
836 | /* A buffer with no data will be dropped */ | |
837 | if (unlikely(skb->len <= 0)) { | |
838 | vxge_debug_tx(VXGE_ERR, | |
839 | "%s: Buffer has no data..", dev->name); | |
840 | dev_kfree_skb(skb); | |
841 | return NETDEV_TX_OK; | |
842 | } | |
843 | ||
844 | vdev = (struct vxgedev *)netdev_priv(dev); | |
845 | ||
846 | if (unlikely(!is_vxge_card_up(vdev))) { | |
847 | vxge_debug_tx(VXGE_ERR, | |
848 | "%s: vdev not initialized", dev->name); | |
849 | dev_kfree_skb(skb); | |
850 | return NETDEV_TX_OK; | |
851 | } | |
852 | ||
853 | if (vdev->config.addr_learn_en) { | |
854 | vpath_no = vxge_learn_mac(vdev, skb->data + ETH_ALEN); | |
855 | if (vpath_no == -EPERM) { | |
856 | vxge_debug_tx(VXGE_ERR, | |
857 | "%s: Failed to store the mac address", | |
858 | dev->name); | |
859 | dev_kfree_skb(skb); | |
860 | return NETDEV_TX_OK; | |
861 | } | |
862 | } | |
863 | ||
864 | if (vdev->config.tx_steering_type == TX_MULTIQ_STEERING) | |
865 | vpath_no = skb_get_queue_mapping(skb); | |
866 | else if (vdev->config.tx_steering_type == TX_PORT_STEERING) | |
867 | vpath_no = vxge_get_vpath_no(vdev, skb, &do_spin_tx_lock); | |
868 | ||
869 | vxge_debug_tx(VXGE_TRACE, "%s: vpath_no= %d", dev->name, vpath_no); | |
870 | ||
871 | if (vpath_no >= vdev->no_of_vpath) | |
872 | vpath_no = 0; | |
873 | ||
874 | fifo = &vdev->vpaths[vpath_no].fifo; | |
875 | fifo_hw = fifo->handle; | |
876 | ||
877 | if (do_spin_tx_lock) | |
878 | spin_lock_irqsave(&fifo->tx_lock, flags); | |
879 | else { | |
880 | if (unlikely(!spin_trylock_irqsave(&fifo->tx_lock, flags))) | |
881 | return NETDEV_TX_LOCKED; | |
882 | } | |
883 | ||
884 | if (vdev->config.tx_steering_type == TX_MULTIQ_STEERING) { | |
885 | if (netif_subqueue_stopped(dev, skb)) { | |
886 | spin_unlock_irqrestore(&fifo->tx_lock, flags); | |
887 | return NETDEV_TX_BUSY; | |
888 | } | |
889 | } else if (unlikely(fifo->queue_state == VPATH_QUEUE_STOP)) { | |
890 | if (netif_queue_stopped(dev)) { | |
891 | spin_unlock_irqrestore(&fifo->tx_lock, flags); | |
892 | return NETDEV_TX_BUSY; | |
893 | } | |
894 | } | |
895 | avail = vxge_hw_fifo_free_txdl_count_get(fifo_hw); | |
896 | if (avail == 0) { | |
897 | vxge_debug_tx(VXGE_ERR, | |
898 | "%s: No free TXDs available", dev->name); | |
899 | fifo->stats.txd_not_free++; | |
900 | vxge_stop_tx_queue(fifo); | |
901 | goto _exit2; | |
902 | } | |
903 | ||
4403b371 BL |
904 | /* Last TXD? Stop tx queue to avoid dropping packets. TX |
905 | * completion will resume the queue. | |
906 | */ | |
907 | if (avail == 1) | |
908 | vxge_stop_tx_queue(fifo); | |
909 | ||
703da5a1 RV |
910 | status = vxge_hw_fifo_txdl_reserve(fifo_hw, &dtr, &dtr_priv); |
911 | if (unlikely(status != VXGE_HW_OK)) { | |
912 | vxge_debug_tx(VXGE_ERR, | |
913 | "%s: Out of descriptors .", dev->name); | |
914 | fifo->stats.txd_out_of_desc++; | |
915 | vxge_stop_tx_queue(fifo); | |
916 | goto _exit2; | |
917 | } | |
918 | ||
919 | vxge_debug_tx(VXGE_TRACE, | |
920 | "%s: %s:%d fifo_hw = %p dtr = %p dtr_priv = %p", | |
921 | dev->name, __func__, __LINE__, | |
922 | fifo_hw, dtr, dtr_priv); | |
923 | ||
924 | if (vdev->vlgrp && vlan_tx_tag_present(skb)) { | |
925 | u16 vlan_tag = vlan_tx_tag_get(skb); | |
926 | vxge_hw_fifo_txdl_vlan_set(dtr, vlan_tag); | |
927 | } | |
928 | ||
929 | first_frg_len = skb_headlen(skb); | |
930 | ||
931 | dma_pointer = pci_map_single(fifo->pdev, skb->data, first_frg_len, | |
932 | PCI_DMA_TODEVICE); | |
933 | ||
934 | if (unlikely(pci_dma_mapping_error(fifo->pdev, dma_pointer))) { | |
935 | vxge_hw_fifo_txdl_free(fifo_hw, dtr); | |
936 | vxge_stop_tx_queue(fifo); | |
937 | fifo->stats.pci_map_fail++; | |
938 | goto _exit2; | |
939 | } | |
940 | ||
941 | txdl_priv = vxge_hw_fifo_txdl_private_get(dtr); | |
942 | txdl_priv->skb = skb; | |
943 | txdl_priv->dma_buffers[j] = dma_pointer; | |
944 | ||
945 | frg_cnt = skb_shinfo(skb)->nr_frags; | |
946 | vxge_debug_tx(VXGE_TRACE, | |
947 | "%s: %s:%d skb = %p txdl_priv = %p " | |
948 | "frag_cnt = %d dma_pointer = 0x%llx", dev->name, | |
949 | __func__, __LINE__, skb, txdl_priv, | |
950 | frg_cnt, (unsigned long long)dma_pointer); | |
951 | ||
952 | vxge_hw_fifo_txdl_buffer_set(fifo_hw, dtr, j++, dma_pointer, | |
953 | first_frg_len); | |
954 | ||
955 | frag = &skb_shinfo(skb)->frags[0]; | |
956 | for (i = 0; i < frg_cnt; i++) { | |
957 | /* ignore 0 length fragment */ | |
958 | if (!frag->size) | |
959 | continue; | |
960 | ||
961 | dma_pointer = | |
962 | (u64)pci_map_page(fifo->pdev, frag->page, | |
963 | frag->page_offset, frag->size, | |
964 | PCI_DMA_TODEVICE); | |
965 | ||
966 | if (unlikely(pci_dma_mapping_error(fifo->pdev, dma_pointer))) | |
967 | goto _exit0; | |
968 | vxge_debug_tx(VXGE_TRACE, | |
969 | "%s: %s:%d frag = %d dma_pointer = 0x%llx", | |
970 | dev->name, __func__, __LINE__, i, | |
971 | (unsigned long long)dma_pointer); | |
972 | ||
973 | txdl_priv->dma_buffers[j] = dma_pointer; | |
974 | vxge_hw_fifo_txdl_buffer_set(fifo_hw, dtr, j++, dma_pointer, | |
975 | frag->size); | |
976 | frag += 1; | |
977 | } | |
978 | ||
979 | offload_type = vxge_offload_type(skb); | |
980 | ||
981 | if (offload_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6)) { | |
982 | ||
983 | int mss = vxge_tcp_mss(skb); | |
984 | if (mss) { | |
703da5a1 RV |
985 | vxge_debug_tx(VXGE_TRACE, |
986 | "%s: %s:%d mss = %d", | |
987 | dev->name, __func__, __LINE__, mss); | |
988 | vxge_hw_fifo_txdl_mss_set(dtr, mss); | |
989 | } else { | |
990 | vxge_assert(skb->len <= | |
991 | dev->mtu + VXGE_HW_MAC_HEADER_MAX_SIZE); | |
992 | vxge_assert(0); | |
993 | goto _exit1; | |
994 | } | |
995 | } | |
996 | ||
997 | if (skb->ip_summed == CHECKSUM_PARTIAL) | |
998 | vxge_hw_fifo_txdl_cksum_set_bits(dtr, | |
999 | VXGE_HW_FIFO_TXD_TX_CKO_IPV4_EN | | |
1000 | VXGE_HW_FIFO_TXD_TX_CKO_TCP_EN | | |
1001 | VXGE_HW_FIFO_TXD_TX_CKO_UDP_EN); | |
1002 | ||
1003 | vxge_hw_fifo_txdl_post(fifo_hw, dtr); | |
28679751 ED |
1004 | #ifdef NETIF_F_LLTX |
1005 | dev->trans_start = jiffies; /* NETIF_F_LLTX driver :( */ | |
1006 | #endif | |
703da5a1 RV |
1007 | spin_unlock_irqrestore(&fifo->tx_lock, flags); |
1008 | ||
1009 | VXGE_COMPLETE_VPATH_TX(fifo); | |
1010 | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d Exiting...", | |
1011 | dev->name, __func__, __LINE__); | |
6ed10654 | 1012 | return NETDEV_TX_OK; |
703da5a1 RV |
1013 | |
1014 | _exit0: | |
1015 | vxge_debug_tx(VXGE_TRACE, "%s: pci_map_page failed", dev->name); | |
1016 | ||
1017 | _exit1: | |
1018 | j = 0; | |
1019 | frag = &skb_shinfo(skb)->frags[0]; | |
1020 | ||
1021 | pci_unmap_single(fifo->pdev, txdl_priv->dma_buffers[j++], | |
1022 | skb_headlen(skb), PCI_DMA_TODEVICE); | |
1023 | ||
1024 | for (; j < i; j++) { | |
1025 | pci_unmap_page(fifo->pdev, txdl_priv->dma_buffers[j], | |
1026 | frag->size, PCI_DMA_TODEVICE); | |
1027 | frag += 1; | |
1028 | } | |
1029 | ||
1030 | vxge_hw_fifo_txdl_free(fifo_hw, dtr); | |
1031 | _exit2: | |
1032 | dev_kfree_skb(skb); | |
1033 | spin_unlock_irqrestore(&fifo->tx_lock, flags); | |
1034 | VXGE_COMPLETE_VPATH_TX(fifo); | |
1035 | ||
6ed10654 | 1036 | return NETDEV_TX_OK; |
703da5a1 RV |
1037 | } |
1038 | ||
1039 | /* | |
1040 | * vxge_rx_term | |
1041 | * | |
1042 | * Function will be called by hw function to abort all outstanding receive | |
1043 | * descriptors. | |
1044 | */ | |
1045 | static void | |
1046 | vxge_rx_term(void *dtrh, enum vxge_hw_rxd_state state, void *userdata) | |
1047 | { | |
1048 | struct vxge_ring *ring = (struct vxge_ring *)userdata; | |
1049 | struct vxge_rx_priv *rx_priv = | |
1050 | vxge_hw_ring_rxd_private_get(dtrh); | |
1051 | ||
1052 | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | |
1053 | ring->ndev->name, __func__, __LINE__); | |
1054 | if (state != VXGE_HW_RXD_STATE_POSTED) | |
1055 | return; | |
1056 | ||
1057 | pci_unmap_single(ring->pdev, rx_priv->data_dma, | |
1058 | rx_priv->data_size, PCI_DMA_FROMDEVICE); | |
1059 | ||
1060 | dev_kfree_skb(rx_priv->skb); | |
ea11bbe0 | 1061 | rx_priv->skb_data = NULL; |
703da5a1 RV |
1062 | |
1063 | vxge_debug_entryexit(VXGE_TRACE, | |
1064 | "%s: %s:%d Exiting...", | |
1065 | ring->ndev->name, __func__, __LINE__); | |
1066 | } | |
1067 | ||
1068 | /* | |
1069 | * vxge_tx_term | |
1070 | * | |
1071 | * Function will be called to abort all outstanding tx descriptors | |
1072 | */ | |
1073 | static void | |
1074 | vxge_tx_term(void *dtrh, enum vxge_hw_txdl_state state, void *userdata) | |
1075 | { | |
1076 | struct vxge_fifo *fifo = (struct vxge_fifo *)userdata; | |
1077 | skb_frag_t *frag; | |
1078 | int i = 0, j, frg_cnt; | |
1079 | struct vxge_tx_priv *txd_priv = vxge_hw_fifo_txdl_private_get(dtrh); | |
1080 | struct sk_buff *skb = txd_priv->skb; | |
1081 | ||
1082 | vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__); | |
1083 | ||
1084 | if (state != VXGE_HW_TXDL_STATE_POSTED) | |
1085 | return; | |
1086 | ||
1087 | /* check skb validity */ | |
1088 | vxge_assert(skb); | |
1089 | frg_cnt = skb_shinfo(skb)->nr_frags; | |
1090 | frag = &skb_shinfo(skb)->frags[0]; | |
1091 | ||
1092 | /* for unfragmented skb */ | |
1093 | pci_unmap_single(fifo->pdev, txd_priv->dma_buffers[i++], | |
1094 | skb_headlen(skb), PCI_DMA_TODEVICE); | |
1095 | ||
1096 | for (j = 0; j < frg_cnt; j++) { | |
1097 | pci_unmap_page(fifo->pdev, txd_priv->dma_buffers[i++], | |
1098 | frag->size, PCI_DMA_TODEVICE); | |
1099 | frag += 1; | |
1100 | } | |
1101 | ||
1102 | dev_kfree_skb(skb); | |
1103 | ||
1104 | vxge_debug_entryexit(VXGE_TRACE, | |
1105 | "%s:%d Exiting...", __func__, __LINE__); | |
1106 | } | |
1107 | ||
1108 | /** | |
1109 | * vxge_set_multicast | |
1110 | * @dev: pointer to the device structure | |
1111 | * | |
1112 | * Entry point for multicast address enable/disable | |
1113 | * This function is a driver entry point which gets called by the kernel | |
1114 | * whenever multicast addresses must be enabled/disabled. This also gets | |
1115 | * called to set/reset promiscuous mode. Depending on the deivce flag, we | |
1116 | * determine, if multicast address must be enabled or if promiscuous mode | |
1117 | * is to be disabled etc. | |
1118 | */ | |
1119 | static void vxge_set_multicast(struct net_device *dev) | |
1120 | { | |
22bedad3 | 1121 | struct netdev_hw_addr *ha; |
703da5a1 RV |
1122 | struct vxgedev *vdev; |
1123 | int i, mcast_cnt = 0; | |
1124 | struct __vxge_hw_device *hldev; | |
1125 | enum vxge_hw_status status = VXGE_HW_OK; | |
1126 | struct macInfo mac_info; | |
1127 | int vpath_idx = 0; | |
1128 | struct vxge_mac_addrs *mac_entry; | |
1129 | struct list_head *list_head; | |
1130 | struct list_head *entry, *next; | |
1131 | u8 *mac_address = NULL; | |
1132 | ||
1133 | vxge_debug_entryexit(VXGE_TRACE, | |
1134 | "%s:%d", __func__, __LINE__); | |
1135 | ||
1136 | vdev = (struct vxgedev *)netdev_priv(dev); | |
1137 | hldev = (struct __vxge_hw_device *)vdev->devh; | |
1138 | ||
1139 | if (unlikely(!is_vxge_card_up(vdev))) | |
1140 | return; | |
1141 | ||
1142 | if ((dev->flags & IFF_ALLMULTI) && (!vdev->all_multi_flg)) { | |
1143 | for (i = 0; i < vdev->no_of_vpath; i++) { | |
1144 | vxge_assert(vdev->vpaths[i].is_open); | |
1145 | status = vxge_hw_vpath_mcast_enable( | |
1146 | vdev->vpaths[i].handle); | |
1147 | vdev->all_multi_flg = 1; | |
1148 | } | |
1149 | } else if ((dev->flags & IFF_ALLMULTI) && (vdev->all_multi_flg)) { | |
1150 | for (i = 0; i < vdev->no_of_vpath; i++) { | |
1151 | vxge_assert(vdev->vpaths[i].is_open); | |
1152 | status = vxge_hw_vpath_mcast_disable( | |
1153 | vdev->vpaths[i].handle); | |
1154 | vdev->all_multi_flg = 1; | |
1155 | } | |
1156 | } | |
1157 | ||
1158 | if (status != VXGE_HW_OK) | |
1159 | vxge_debug_init(VXGE_ERR, | |
1160 | "failed to %s multicast, status %d", | |
1161 | dev->flags & IFF_ALLMULTI ? | |
1162 | "enable" : "disable", status); | |
1163 | ||
1164 | if (!vdev->config.addr_learn_en) { | |
1165 | if (dev->flags & IFF_PROMISC) { | |
1166 | for (i = 0; i < vdev->no_of_vpath; i++) { | |
1167 | vxge_assert(vdev->vpaths[i].is_open); | |
1168 | status = vxge_hw_vpath_promisc_enable( | |
1169 | vdev->vpaths[i].handle); | |
1170 | } | |
1171 | } else { | |
1172 | for (i = 0; i < vdev->no_of_vpath; i++) { | |
1173 | vxge_assert(vdev->vpaths[i].is_open); | |
1174 | status = vxge_hw_vpath_promisc_disable( | |
1175 | vdev->vpaths[i].handle); | |
1176 | } | |
1177 | } | |
1178 | } | |
1179 | ||
1180 | memset(&mac_info, 0, sizeof(struct macInfo)); | |
1181 | /* Update individual M_CAST address list */ | |
4cd24eaf | 1182 | if ((!vdev->all_multi_flg) && netdev_mc_count(dev)) { |
703da5a1 RV |
1183 | |
1184 | mcast_cnt = vdev->vpaths[0].mcast_addr_cnt; | |
1185 | list_head = &vdev->vpaths[0].mac_addr_list; | |
4cd24eaf | 1186 | if ((netdev_mc_count(dev) + |
703da5a1 RV |
1187 | (vdev->vpaths[0].mac_addr_cnt - mcast_cnt)) > |
1188 | vdev->vpaths[0].max_mac_addr_cnt) | |
1189 | goto _set_all_mcast; | |
1190 | ||
1191 | /* Delete previous MC's */ | |
1192 | for (i = 0; i < mcast_cnt; i++) { | |
1193 | if (!list_empty(list_head)) | |
1194 | mac_entry = (struct vxge_mac_addrs *) | |
1195 | list_first_entry(list_head, | |
1196 | struct vxge_mac_addrs, | |
1197 | item); | |
1198 | ||
1199 | list_for_each_safe(entry, next, list_head) { | |
1200 | ||
1201 | mac_entry = (struct vxge_mac_addrs *) entry; | |
1202 | /* Copy the mac address to delete */ | |
1203 | mac_address = (u8 *)&mac_entry->macaddr; | |
1204 | memcpy(mac_info.macaddr, mac_address, ETH_ALEN); | |
1205 | ||
1206 | /* Is this a multicast address */ | |
1207 | if (0x01 & mac_info.macaddr[0]) { | |
1208 | for (vpath_idx = 0; vpath_idx < | |
1209 | vdev->no_of_vpath; | |
1210 | vpath_idx++) { | |
1211 | mac_info.vpath_no = vpath_idx; | |
1212 | status = vxge_del_mac_addr( | |
1213 | vdev, | |
1214 | &mac_info); | |
1215 | } | |
1216 | } | |
1217 | } | |
1218 | } | |
1219 | ||
1220 | /* Add new ones */ | |
22bedad3 JP |
1221 | netdev_for_each_mc_addr(ha, dev) { |
1222 | memcpy(mac_info.macaddr, ha->addr, ETH_ALEN); | |
703da5a1 RV |
1223 | for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; |
1224 | vpath_idx++) { | |
1225 | mac_info.vpath_no = vpath_idx; | |
1226 | mac_info.state = VXGE_LL_MAC_ADDR_IN_DA_TABLE; | |
1227 | status = vxge_add_mac_addr(vdev, &mac_info); | |
1228 | if (status != VXGE_HW_OK) { | |
1229 | vxge_debug_init(VXGE_ERR, | |
1230 | "%s:%d Setting individual" | |
1231 | "multicast address failed", | |
1232 | __func__, __LINE__); | |
1233 | goto _set_all_mcast; | |
1234 | } | |
1235 | } | |
1236 | } | |
1237 | ||
1238 | return; | |
1239 | _set_all_mcast: | |
1240 | mcast_cnt = vdev->vpaths[0].mcast_addr_cnt; | |
1241 | /* Delete previous MC's */ | |
1242 | for (i = 0; i < mcast_cnt; i++) { | |
1243 | ||
1244 | list_for_each_safe(entry, next, list_head) { | |
1245 | ||
1246 | mac_entry = (struct vxge_mac_addrs *) entry; | |
1247 | /* Copy the mac address to delete */ | |
1248 | mac_address = (u8 *)&mac_entry->macaddr; | |
1249 | memcpy(mac_info.macaddr, mac_address, ETH_ALEN); | |
1250 | ||
1251 | /* Is this a multicast address */ | |
1252 | if (0x01 & mac_info.macaddr[0]) | |
1253 | break; | |
1254 | } | |
1255 | ||
1256 | for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; | |
1257 | vpath_idx++) { | |
1258 | mac_info.vpath_no = vpath_idx; | |
1259 | status = vxge_del_mac_addr(vdev, &mac_info); | |
1260 | } | |
1261 | } | |
1262 | ||
1263 | /* Enable all multicast */ | |
1264 | for (i = 0; i < vdev->no_of_vpath; i++) { | |
1265 | vxge_assert(vdev->vpaths[i].is_open); | |
1266 | status = vxge_hw_vpath_mcast_enable( | |
1267 | vdev->vpaths[i].handle); | |
1268 | if (status != VXGE_HW_OK) { | |
1269 | vxge_debug_init(VXGE_ERR, | |
1270 | "%s:%d Enabling all multicasts failed", | |
1271 | __func__, __LINE__); | |
1272 | } | |
1273 | vdev->all_multi_flg = 1; | |
1274 | } | |
1275 | dev->flags |= IFF_ALLMULTI; | |
1276 | } | |
1277 | ||
1278 | vxge_debug_entryexit(VXGE_TRACE, | |
1279 | "%s:%d Exiting...", __func__, __LINE__); | |
1280 | } | |
1281 | ||
1282 | /** | |
1283 | * vxge_set_mac_addr | |
1284 | * @dev: pointer to the device structure | |
1285 | * | |
1286 | * Update entry "0" (default MAC addr) | |
1287 | */ | |
1288 | static int vxge_set_mac_addr(struct net_device *dev, void *p) | |
1289 | { | |
1290 | struct sockaddr *addr = p; | |
1291 | struct vxgedev *vdev; | |
1292 | struct __vxge_hw_device *hldev; | |
1293 | enum vxge_hw_status status = VXGE_HW_OK; | |
1294 | struct macInfo mac_info_new, mac_info_old; | |
1295 | int vpath_idx = 0; | |
1296 | ||
1297 | vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__); | |
1298 | ||
1299 | vdev = (struct vxgedev *)netdev_priv(dev); | |
1300 | hldev = vdev->devh; | |
1301 | ||
1302 | if (!is_valid_ether_addr(addr->sa_data)) | |
1303 | return -EINVAL; | |
1304 | ||
1305 | memset(&mac_info_new, 0, sizeof(struct macInfo)); | |
1306 | memset(&mac_info_old, 0, sizeof(struct macInfo)); | |
1307 | ||
1308 | vxge_debug_entryexit(VXGE_TRACE, "%s:%d Exiting...", | |
1309 | __func__, __LINE__); | |
1310 | ||
1311 | /* Get the old address */ | |
1312 | memcpy(mac_info_old.macaddr, dev->dev_addr, dev->addr_len); | |
1313 | ||
1314 | /* Copy the new address */ | |
1315 | memcpy(mac_info_new.macaddr, addr->sa_data, dev->addr_len); | |
1316 | ||
1317 | /* First delete the old mac address from all the vpaths | |
1318 | as we can't specify the index while adding new mac address */ | |
1319 | for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; vpath_idx++) { | |
1320 | struct vxge_vpath *vpath = &vdev->vpaths[vpath_idx]; | |
1321 | if (!vpath->is_open) { | |
1322 | /* This can happen when this interface is added/removed | |
1323 | to the bonding interface. Delete this station address | |
1324 | from the linked list */ | |
1325 | vxge_mac_list_del(vpath, &mac_info_old); | |
1326 | ||
1327 | /* Add this new address to the linked list | |
1328 | for later restoring */ | |
1329 | vxge_mac_list_add(vpath, &mac_info_new); | |
1330 | ||
1331 | continue; | |
1332 | } | |
1333 | /* Delete the station address */ | |
1334 | mac_info_old.vpath_no = vpath_idx; | |
1335 | status = vxge_del_mac_addr(vdev, &mac_info_old); | |
1336 | } | |
1337 | ||
1338 | if (unlikely(!is_vxge_card_up(vdev))) { | |
1339 | memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); | |
1340 | return VXGE_HW_OK; | |
1341 | } | |
1342 | ||
1343 | /* Set this mac address to all the vpaths */ | |
1344 | for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; vpath_idx++) { | |
1345 | mac_info_new.vpath_no = vpath_idx; | |
1346 | mac_info_new.state = VXGE_LL_MAC_ADDR_IN_DA_TABLE; | |
1347 | status = vxge_add_mac_addr(vdev, &mac_info_new); | |
1348 | if (status != VXGE_HW_OK) | |
1349 | return -EINVAL; | |
1350 | } | |
1351 | ||
1352 | memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); | |
1353 | ||
1354 | return status; | |
1355 | } | |
1356 | ||
1357 | /* | |
1358 | * vxge_vpath_intr_enable | |
1359 | * @vdev: pointer to vdev | |
1360 | * @vp_id: vpath for which to enable the interrupts | |
1361 | * | |
1362 | * Enables the interrupts for the vpath | |
1363 | */ | |
1364 | void vxge_vpath_intr_enable(struct vxgedev *vdev, int vp_id) | |
1365 | { | |
1366 | struct vxge_vpath *vpath = &vdev->vpaths[vp_id]; | |
b59c9457 SH |
1367 | int msix_id = 0; |
1368 | int tim_msix_id[4] = {0, 1, 0, 0}; | |
1369 | int alarm_msix_id = VXGE_ALARM_MSIX_ID; | |
703da5a1 RV |
1370 | |
1371 | vxge_hw_vpath_intr_enable(vpath->handle); | |
1372 | ||
1373 | if (vdev->config.intr_type == INTA) | |
1374 | vxge_hw_vpath_inta_unmask_tx_rx(vpath->handle); | |
1375 | else { | |
703da5a1 RV |
1376 | vxge_hw_vpath_msix_set(vpath->handle, tim_msix_id, |
1377 | alarm_msix_id); | |
1378 | ||
b59c9457 | 1379 | msix_id = vpath->device_id * VXGE_HW_VPATH_MSIX_ACTIVE; |
703da5a1 RV |
1380 | vxge_hw_vpath_msix_unmask(vpath->handle, msix_id); |
1381 | vxge_hw_vpath_msix_unmask(vpath->handle, msix_id + 1); | |
1382 | ||
1383 | /* enable the alarm vector */ | |
b59c9457 SH |
1384 | msix_id = (vpath->handle->vpath->hldev->first_vp_id * |
1385 | VXGE_HW_VPATH_MSIX_ACTIVE) + alarm_msix_id; | |
1386 | vxge_hw_vpath_msix_unmask(vpath->handle, msix_id); | |
703da5a1 RV |
1387 | } |
1388 | } | |
1389 | ||
1390 | /* | |
1391 | * vxge_vpath_intr_disable | |
1392 | * @vdev: pointer to vdev | |
1393 | * @vp_id: vpath for which to disable the interrupts | |
1394 | * | |
1395 | * Disables the interrupts for the vpath | |
1396 | */ | |
1397 | void vxge_vpath_intr_disable(struct vxgedev *vdev, int vp_id) | |
1398 | { | |
1399 | struct vxge_vpath *vpath = &vdev->vpaths[vp_id]; | |
1400 | int msix_id; | |
1401 | ||
1402 | vxge_hw_vpath_intr_disable(vpath->handle); | |
1403 | ||
1404 | if (vdev->config.intr_type == INTA) | |
1405 | vxge_hw_vpath_inta_mask_tx_rx(vpath->handle); | |
1406 | else { | |
b59c9457 | 1407 | msix_id = vpath->device_id * VXGE_HW_VPATH_MSIX_ACTIVE; |
703da5a1 RV |
1408 | vxge_hw_vpath_msix_mask(vpath->handle, msix_id); |
1409 | vxge_hw_vpath_msix_mask(vpath->handle, msix_id + 1); | |
1410 | ||
1411 | /* disable the alarm vector */ | |
b59c9457 SH |
1412 | msix_id = (vpath->handle->vpath->hldev->first_vp_id * |
1413 | VXGE_HW_VPATH_MSIX_ACTIVE) + VXGE_ALARM_MSIX_ID; | |
703da5a1 RV |
1414 | vxge_hw_vpath_msix_mask(vpath->handle, msix_id); |
1415 | } | |
1416 | } | |
1417 | ||
1418 | /* | |
1419 | * vxge_reset_vpath | |
1420 | * @vdev: pointer to vdev | |
1421 | * @vp_id: vpath to reset | |
1422 | * | |
1423 | * Resets the vpath | |
1424 | */ | |
1425 | static int vxge_reset_vpath(struct vxgedev *vdev, int vp_id) | |
1426 | { | |
1427 | enum vxge_hw_status status = VXGE_HW_OK; | |
1428 | int ret = 0; | |
1429 | ||
1430 | /* check if device is down already */ | |
1431 | if (unlikely(!is_vxge_card_up(vdev))) | |
1432 | return 0; | |
1433 | ||
1434 | /* is device reset already scheduled */ | |
1435 | if (test_bit(__VXGE_STATE_RESET_CARD, &vdev->state)) | |
1436 | return 0; | |
1437 | ||
1438 | if (vdev->vpaths[vp_id].handle) { | |
1439 | if (vxge_hw_vpath_reset(vdev->vpaths[vp_id].handle) | |
1440 | == VXGE_HW_OK) { | |
1441 | if (is_vxge_card_up(vdev) && | |
1442 | vxge_hw_vpath_recover_from_reset( | |
1443 | vdev->vpaths[vp_id].handle) | |
1444 | != VXGE_HW_OK) { | |
1445 | vxge_debug_init(VXGE_ERR, | |
1446 | "vxge_hw_vpath_recover_from_reset" | |
1447 | "failed for vpath:%d", vp_id); | |
1448 | return status; | |
1449 | } | |
1450 | } else { | |
1451 | vxge_debug_init(VXGE_ERR, | |
1452 | "vxge_hw_vpath_reset failed for" | |
1453 | "vpath:%d", vp_id); | |
1454 | return status; | |
1455 | } | |
1456 | } else | |
1457 | return VXGE_HW_FAIL; | |
1458 | ||
1459 | vxge_restore_vpath_mac_addr(&vdev->vpaths[vp_id]); | |
1460 | vxge_restore_vpath_vid_table(&vdev->vpaths[vp_id]); | |
1461 | ||
1462 | /* Enable all broadcast */ | |
1463 | vxge_hw_vpath_bcast_enable(vdev->vpaths[vp_id].handle); | |
1464 | ||
1465 | /* Enable the interrupts */ | |
1466 | vxge_vpath_intr_enable(vdev, vp_id); | |
1467 | ||
1468 | smp_wmb(); | |
1469 | ||
1470 | /* Enable the flow of traffic through the vpath */ | |
1471 | vxge_hw_vpath_enable(vdev->vpaths[vp_id].handle); | |
1472 | ||
1473 | smp_wmb(); | |
1474 | vxge_hw_vpath_rx_doorbell_init(vdev->vpaths[vp_id].handle); | |
1475 | vdev->vpaths[vp_id].ring.last_status = VXGE_HW_OK; | |
1476 | ||
1477 | /* Vpath reset done */ | |
1478 | clear_bit(vp_id, &vdev->vp_reset); | |
1479 | ||
1480 | /* Start the vpath queue */ | |
1481 | vxge_wake_tx_queue(&vdev->vpaths[vp_id].fifo, NULL); | |
1482 | ||
1483 | return ret; | |
1484 | } | |
1485 | ||
1486 | static int do_vxge_reset(struct vxgedev *vdev, int event) | |
1487 | { | |
1488 | enum vxge_hw_status status; | |
1489 | int ret = 0, vp_id, i; | |
1490 | ||
1491 | vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__); | |
1492 | ||
1493 | if ((event == VXGE_LL_FULL_RESET) || (event == VXGE_LL_START_RESET)) { | |
1494 | /* check if device is down already */ | |
1495 | if (unlikely(!is_vxge_card_up(vdev))) | |
1496 | return 0; | |
1497 | ||
1498 | /* is reset already scheduled */ | |
1499 | if (test_and_set_bit(__VXGE_STATE_RESET_CARD, &vdev->state)) | |
1500 | return 0; | |
1501 | } | |
1502 | ||
1503 | if (event == VXGE_LL_FULL_RESET) { | |
1504 | /* wait for all the vpath reset to complete */ | |
1505 | for (vp_id = 0; vp_id < vdev->no_of_vpath; vp_id++) { | |
1506 | while (test_bit(vp_id, &vdev->vp_reset)) | |
1507 | msleep(50); | |
1508 | } | |
1509 | ||
1510 | /* if execution mode is set to debug, don't reset the adapter */ | |
1511 | if (unlikely(vdev->exec_mode)) { | |
1512 | vxge_debug_init(VXGE_ERR, | |
1513 | "%s: execution mode is debug, returning..", | |
1514 | vdev->ndev->name); | |
1515 | clear_bit(__VXGE_STATE_CARD_UP, &vdev->state); | |
1516 | vxge_stop_all_tx_queue(vdev); | |
1517 | return 0; | |
1518 | } | |
1519 | } | |
1520 | ||
1521 | if (event == VXGE_LL_FULL_RESET) { | |
1522 | vxge_hw_device_intr_disable(vdev->devh); | |
1523 | ||
1524 | switch (vdev->cric_err_event) { | |
1525 | case VXGE_HW_EVENT_UNKNOWN: | |
1526 | vxge_stop_all_tx_queue(vdev); | |
1527 | vxge_debug_init(VXGE_ERR, | |
1528 | "fatal: %s: Disabling device due to" | |
1529 | "unknown error", | |
1530 | vdev->ndev->name); | |
1531 | ret = -EPERM; | |
1532 | goto out; | |
1533 | case VXGE_HW_EVENT_RESET_START: | |
1534 | break; | |
1535 | case VXGE_HW_EVENT_RESET_COMPLETE: | |
1536 | case VXGE_HW_EVENT_LINK_DOWN: | |
1537 | case VXGE_HW_EVENT_LINK_UP: | |
1538 | case VXGE_HW_EVENT_ALARM_CLEARED: | |
1539 | case VXGE_HW_EVENT_ECCERR: | |
1540 | case VXGE_HW_EVENT_MRPCIM_ECCERR: | |
1541 | ret = -EPERM; | |
1542 | goto out; | |
1543 | case VXGE_HW_EVENT_FIFO_ERR: | |
1544 | case VXGE_HW_EVENT_VPATH_ERR: | |
1545 | break; | |
1546 | case VXGE_HW_EVENT_CRITICAL_ERR: | |
1547 | vxge_stop_all_tx_queue(vdev); | |
1548 | vxge_debug_init(VXGE_ERR, | |
1549 | "fatal: %s: Disabling device due to" | |
1550 | "serious error", | |
1551 | vdev->ndev->name); | |
1552 | /* SOP or device reset required */ | |
1553 | /* This event is not currently used */ | |
1554 | ret = -EPERM; | |
1555 | goto out; | |
1556 | case VXGE_HW_EVENT_SERR: | |
1557 | vxge_stop_all_tx_queue(vdev); | |
1558 | vxge_debug_init(VXGE_ERR, | |
1559 | "fatal: %s: Disabling device due to" | |
1560 | "serious error", | |
1561 | vdev->ndev->name); | |
1562 | ret = -EPERM; | |
1563 | goto out; | |
1564 | case VXGE_HW_EVENT_SRPCIM_SERR: | |
1565 | case VXGE_HW_EVENT_MRPCIM_SERR: | |
1566 | ret = -EPERM; | |
1567 | goto out; | |
1568 | case VXGE_HW_EVENT_SLOT_FREEZE: | |
1569 | vxge_stop_all_tx_queue(vdev); | |
1570 | vxge_debug_init(VXGE_ERR, | |
1571 | "fatal: %s: Disabling device due to" | |
1572 | "slot freeze", | |
1573 | vdev->ndev->name); | |
1574 | ret = -EPERM; | |
1575 | goto out; | |
1576 | default: | |
1577 | break; | |
1578 | ||
1579 | } | |
1580 | } | |
1581 | ||
1582 | if ((event == VXGE_LL_FULL_RESET) || (event == VXGE_LL_START_RESET)) | |
1583 | vxge_stop_all_tx_queue(vdev); | |
1584 | ||
1585 | if (event == VXGE_LL_FULL_RESET) { | |
1586 | status = vxge_reset_all_vpaths(vdev); | |
1587 | if (status != VXGE_HW_OK) { | |
1588 | vxge_debug_init(VXGE_ERR, | |
1589 | "fatal: %s: can not reset vpaths", | |
1590 | vdev->ndev->name); | |
1591 | ret = -EPERM; | |
1592 | goto out; | |
1593 | } | |
1594 | } | |
1595 | ||
1596 | if (event == VXGE_LL_COMPL_RESET) { | |
1597 | for (i = 0; i < vdev->no_of_vpath; i++) | |
1598 | if (vdev->vpaths[i].handle) { | |
1599 | if (vxge_hw_vpath_recover_from_reset( | |
1600 | vdev->vpaths[i].handle) | |
1601 | != VXGE_HW_OK) { | |
1602 | vxge_debug_init(VXGE_ERR, | |
1603 | "vxge_hw_vpath_recover_" | |
1604 | "from_reset failed for vpath: " | |
1605 | "%d", i); | |
1606 | ret = -EPERM; | |
1607 | goto out; | |
1608 | } | |
1609 | } else { | |
1610 | vxge_debug_init(VXGE_ERR, | |
1611 | "vxge_hw_vpath_reset failed for " | |
1612 | "vpath:%d", i); | |
1613 | ret = -EPERM; | |
1614 | goto out; | |
1615 | } | |
1616 | } | |
1617 | ||
1618 | if ((event == VXGE_LL_FULL_RESET) || (event == VXGE_LL_COMPL_RESET)) { | |
1619 | /* Reprogram the DA table with populated mac addresses */ | |
1620 | for (vp_id = 0; vp_id < vdev->no_of_vpath; vp_id++) { | |
1621 | vxge_restore_vpath_mac_addr(&vdev->vpaths[vp_id]); | |
1622 | vxge_restore_vpath_vid_table(&vdev->vpaths[vp_id]); | |
1623 | } | |
1624 | ||
1625 | /* enable vpath interrupts */ | |
1626 | for (i = 0; i < vdev->no_of_vpath; i++) | |
1627 | vxge_vpath_intr_enable(vdev, i); | |
1628 | ||
1629 | vxge_hw_device_intr_enable(vdev->devh); | |
1630 | ||
1631 | smp_wmb(); | |
1632 | ||
1633 | /* Indicate card up */ | |
1634 | set_bit(__VXGE_STATE_CARD_UP, &vdev->state); | |
1635 | ||
1636 | /* Get the traffic to flow through the vpaths */ | |
1637 | for (i = 0; i < vdev->no_of_vpath; i++) { | |
1638 | vxge_hw_vpath_enable(vdev->vpaths[i].handle); | |
1639 | smp_wmb(); | |
1640 | vxge_hw_vpath_rx_doorbell_init(vdev->vpaths[i].handle); | |
1641 | } | |
1642 | ||
1643 | vxge_wake_all_tx_queue(vdev); | |
1644 | } | |
1645 | ||
1646 | out: | |
1647 | vxge_debug_entryexit(VXGE_TRACE, | |
1648 | "%s:%d Exiting...", __func__, __LINE__); | |
1649 | ||
1650 | /* Indicate reset done */ | |
1651 | if ((event == VXGE_LL_FULL_RESET) || (event == VXGE_LL_COMPL_RESET)) | |
1652 | clear_bit(__VXGE_STATE_RESET_CARD, &vdev->state); | |
1653 | return ret; | |
1654 | } | |
1655 | ||
1656 | /* | |
1657 | * vxge_reset | |
1658 | * @vdev: pointer to ll device | |
1659 | * | |
1660 | * driver may reset the chip on events of serr, eccerr, etc | |
1661 | */ | |
1662 | int vxge_reset(struct vxgedev *vdev) | |
1663 | { | |
1664 | do_vxge_reset(vdev, VXGE_LL_FULL_RESET); | |
1665 | return 0; | |
1666 | } | |
1667 | ||
1668 | /** | |
1669 | * vxge_poll - Receive handler when Receive Polling is used. | |
1670 | * @dev: pointer to the device structure. | |
1671 | * @budget: Number of packets budgeted to be processed in this iteration. | |
1672 | * | |
1673 | * This function comes into picture only if Receive side is being handled | |
1674 | * through polling (called NAPI in linux). It mostly does what the normal | |
1675 | * Rx interrupt handler does in terms of descriptor and packet processing | |
1676 | * but not in an interrupt context. Also it will process a specified number | |
1677 | * of packets at most in one iteration. This value is passed down by the | |
1678 | * kernel as the function argument 'budget'. | |
1679 | */ | |
1680 | static int vxge_poll_msix(struct napi_struct *napi, int budget) | |
1681 | { | |
1682 | struct vxge_ring *ring = | |
1683 | container_of(napi, struct vxge_ring, napi); | |
1684 | int budget_org = budget; | |
1685 | ring->budget = budget; | |
1686 | ||
1687 | vxge_hw_vpath_poll_rx(ring->handle); | |
1688 | ||
1689 | if (ring->pkts_processed < budget_org) { | |
1690 | napi_complete(napi); | |
1691 | /* Re enable the Rx interrupts for the vpath */ | |
1692 | vxge_hw_channel_msix_unmask( | |
1693 | (struct __vxge_hw_channel *)ring->handle, | |
1694 | ring->rx_vector_no); | |
1695 | } | |
1696 | ||
1697 | return ring->pkts_processed; | |
1698 | } | |
1699 | ||
1700 | static int vxge_poll_inta(struct napi_struct *napi, int budget) | |
1701 | { | |
1702 | struct vxgedev *vdev = container_of(napi, struct vxgedev, napi); | |
1703 | int pkts_processed = 0; | |
1704 | int i; | |
1705 | int budget_org = budget; | |
1706 | struct vxge_ring *ring; | |
1707 | ||
1708 | struct __vxge_hw_device *hldev = (struct __vxge_hw_device *) | |
1709 | pci_get_drvdata(vdev->pdev); | |
1710 | ||
1711 | for (i = 0; i < vdev->no_of_vpath; i++) { | |
1712 | ring = &vdev->vpaths[i].ring; | |
1713 | ring->budget = budget; | |
1714 | vxge_hw_vpath_poll_rx(ring->handle); | |
1715 | pkts_processed += ring->pkts_processed; | |
1716 | budget -= ring->pkts_processed; | |
1717 | if (budget <= 0) | |
1718 | break; | |
1719 | } | |
1720 | ||
1721 | VXGE_COMPLETE_ALL_TX(vdev); | |
1722 | ||
1723 | if (pkts_processed < budget_org) { | |
1724 | napi_complete(napi); | |
1725 | /* Re enable the Rx interrupts for the ring */ | |
1726 | vxge_hw_device_unmask_all(hldev); | |
1727 | vxge_hw_device_flush_io(hldev); | |
1728 | } | |
1729 | ||
1730 | return pkts_processed; | |
1731 | } | |
1732 | ||
1733 | #ifdef CONFIG_NET_POLL_CONTROLLER | |
1734 | /** | |
1735 | * vxge_netpoll - netpoll event handler entry point | |
1736 | * @dev : pointer to the device structure. | |
1737 | * Description: | |
1738 | * This function will be called by upper layer to check for events on the | |
1739 | * interface in situations where interrupts are disabled. It is used for | |
1740 | * specific in-kernel networking tasks, such as remote consoles and kernel | |
1741 | * debugging over the network (example netdump in RedHat). | |
1742 | */ | |
1743 | static void vxge_netpoll(struct net_device *dev) | |
1744 | { | |
1745 | struct __vxge_hw_device *hldev; | |
1746 | struct vxgedev *vdev; | |
1747 | ||
1748 | vdev = (struct vxgedev *)netdev_priv(dev); | |
1749 | hldev = (struct __vxge_hw_device *)pci_get_drvdata(vdev->pdev); | |
1750 | ||
1751 | vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__); | |
1752 | ||
1753 | if (pci_channel_offline(vdev->pdev)) | |
1754 | return; | |
1755 | ||
1756 | disable_irq(dev->irq); | |
1757 | vxge_hw_device_clear_tx_rx(hldev); | |
1758 | ||
1759 | vxge_hw_device_clear_tx_rx(hldev); | |
1760 | VXGE_COMPLETE_ALL_RX(vdev); | |
1761 | VXGE_COMPLETE_ALL_TX(vdev); | |
1762 | ||
1763 | enable_irq(dev->irq); | |
1764 | ||
1765 | vxge_debug_entryexit(VXGE_TRACE, | |
1766 | "%s:%d Exiting...", __func__, __LINE__); | |
703da5a1 RV |
1767 | } |
1768 | #endif | |
1769 | ||
1770 | /* RTH configuration */ | |
1771 | static enum vxge_hw_status vxge_rth_configure(struct vxgedev *vdev) | |
1772 | { | |
1773 | enum vxge_hw_status status = VXGE_HW_OK; | |
1774 | struct vxge_hw_rth_hash_types hash_types; | |
1775 | u8 itable[256] = {0}; /* indirection table */ | |
1776 | u8 mtable[256] = {0}; /* CPU to vpath mapping */ | |
1777 | int index; | |
1778 | ||
1779 | /* | |
1780 | * Filling | |
1781 | * - itable with bucket numbers | |
1782 | * - mtable with bucket-to-vpath mapping | |
1783 | */ | |
1784 | for (index = 0; index < (1 << vdev->config.rth_bkt_sz); index++) { | |
1785 | itable[index] = index; | |
1786 | mtable[index] = index % vdev->no_of_vpath; | |
1787 | } | |
1788 | ||
1789 | /* Fill RTH hash types */ | |
1790 | hash_types.hash_type_tcpipv4_en = vdev->config.rth_hash_type_tcpipv4; | |
1791 | hash_types.hash_type_ipv4_en = vdev->config.rth_hash_type_ipv4; | |
1792 | hash_types.hash_type_tcpipv6_en = vdev->config.rth_hash_type_tcpipv6; | |
1793 | hash_types.hash_type_ipv6_en = vdev->config.rth_hash_type_ipv6; | |
1794 | hash_types.hash_type_tcpipv6ex_en = | |
1795 | vdev->config.rth_hash_type_tcpipv6ex; | |
1796 | hash_types.hash_type_ipv6ex_en = vdev->config.rth_hash_type_ipv6ex; | |
1797 | ||
1798 | /* set indirection table, bucket-to-vpath mapping */ | |
1799 | status = vxge_hw_vpath_rts_rth_itable_set(vdev->vp_handles, | |
1800 | vdev->no_of_vpath, | |
1801 | mtable, itable, | |
1802 | vdev->config.rth_bkt_sz); | |
1803 | if (status != VXGE_HW_OK) { | |
1804 | vxge_debug_init(VXGE_ERR, | |
1805 | "RTH indirection table configuration failed " | |
1806 | "for vpath:%d", vdev->vpaths[0].device_id); | |
1807 | return status; | |
1808 | } | |
1809 | ||
1810 | /* | |
1811 | * Because the itable_set() method uses the active_table field | |
1812 | * for the target virtual path the RTH config should be updated | |
1813 | * for all VPATHs. The h/w only uses the lowest numbered VPATH | |
1814 | * when steering frames. | |
1815 | */ | |
1816 | for (index = 0; index < vdev->no_of_vpath; index++) { | |
1817 | status = vxge_hw_vpath_rts_rth_set( | |
1818 | vdev->vpaths[index].handle, | |
1819 | vdev->config.rth_algorithm, | |
1820 | &hash_types, | |
1821 | vdev->config.rth_bkt_sz); | |
1822 | ||
1823 | if (status != VXGE_HW_OK) { | |
1824 | vxge_debug_init(VXGE_ERR, | |
1825 | "RTH configuration failed for vpath:%d", | |
1826 | vdev->vpaths[index].device_id); | |
1827 | return status; | |
1828 | } | |
1829 | } | |
1830 | ||
1831 | return status; | |
1832 | } | |
1833 | ||
1834 | int vxge_mac_list_add(struct vxge_vpath *vpath, struct macInfo *mac) | |
1835 | { | |
1836 | struct vxge_mac_addrs *new_mac_entry; | |
1837 | u8 *mac_address = NULL; | |
1838 | ||
1839 | if (vpath->mac_addr_cnt >= VXGE_MAX_LEARN_MAC_ADDR_CNT) | |
1840 | return TRUE; | |
1841 | ||
1842 | new_mac_entry = kzalloc(sizeof(struct vxge_mac_addrs), GFP_ATOMIC); | |
1843 | if (!new_mac_entry) { | |
1844 | vxge_debug_mem(VXGE_ERR, | |
1845 | "%s: memory allocation failed", | |
1846 | VXGE_DRIVER_NAME); | |
1847 | return FALSE; | |
1848 | } | |
1849 | ||
1850 | list_add(&new_mac_entry->item, &vpath->mac_addr_list); | |
1851 | ||
1852 | /* Copy the new mac address to the list */ | |
1853 | mac_address = (u8 *)&new_mac_entry->macaddr; | |
1854 | memcpy(mac_address, mac->macaddr, ETH_ALEN); | |
1855 | ||
1856 | new_mac_entry->state = mac->state; | |
1857 | vpath->mac_addr_cnt++; | |
1858 | ||
1859 | /* Is this a multicast address */ | |
1860 | if (0x01 & mac->macaddr[0]) | |
1861 | vpath->mcast_addr_cnt++; | |
1862 | ||
1863 | return TRUE; | |
1864 | } | |
1865 | ||
1866 | /* Add a mac address to DA table */ | |
1867 | enum vxge_hw_status vxge_add_mac_addr(struct vxgedev *vdev, struct macInfo *mac) | |
1868 | { | |
1869 | enum vxge_hw_status status = VXGE_HW_OK; | |
1870 | struct vxge_vpath *vpath; | |
1871 | enum vxge_hw_vpath_mac_addr_add_mode duplicate_mode; | |
1872 | ||
1873 | if (0x01 & mac->macaddr[0]) /* multicast address */ | |
1874 | duplicate_mode = VXGE_HW_VPATH_MAC_ADDR_ADD_DUPLICATE; | |
1875 | else | |
1876 | duplicate_mode = VXGE_HW_VPATH_MAC_ADDR_REPLACE_DUPLICATE; | |
1877 | ||
1878 | vpath = &vdev->vpaths[mac->vpath_no]; | |
1879 | status = vxge_hw_vpath_mac_addr_add(vpath->handle, mac->macaddr, | |
1880 | mac->macmask, duplicate_mode); | |
1881 | if (status != VXGE_HW_OK) { | |
1882 | vxge_debug_init(VXGE_ERR, | |
1883 | "DA config add entry failed for vpath:%d", | |
1884 | vpath->device_id); | |
1885 | } else | |
1886 | if (FALSE == vxge_mac_list_add(vpath, mac)) | |
1887 | status = -EPERM; | |
1888 | ||
1889 | return status; | |
1890 | } | |
1891 | ||
1892 | int vxge_mac_list_del(struct vxge_vpath *vpath, struct macInfo *mac) | |
1893 | { | |
1894 | struct list_head *entry, *next; | |
1895 | u64 del_mac = 0; | |
1896 | u8 *mac_address = (u8 *) (&del_mac); | |
1897 | ||
1898 | /* Copy the mac address to delete from the list */ | |
1899 | memcpy(mac_address, mac->macaddr, ETH_ALEN); | |
1900 | ||
1901 | list_for_each_safe(entry, next, &vpath->mac_addr_list) { | |
1902 | if (((struct vxge_mac_addrs *)entry)->macaddr == del_mac) { | |
1903 | list_del(entry); | |
1904 | kfree((struct vxge_mac_addrs *)entry); | |
1905 | vpath->mac_addr_cnt--; | |
1906 | ||
1907 | /* Is this a multicast address */ | |
1908 | if (0x01 & mac->macaddr[0]) | |
1909 | vpath->mcast_addr_cnt--; | |
1910 | return TRUE; | |
1911 | } | |
1912 | } | |
1913 | ||
1914 | return FALSE; | |
1915 | } | |
1916 | /* delete a mac address from DA table */ | |
1917 | enum vxge_hw_status vxge_del_mac_addr(struct vxgedev *vdev, struct macInfo *mac) | |
1918 | { | |
1919 | enum vxge_hw_status status = VXGE_HW_OK; | |
1920 | struct vxge_vpath *vpath; | |
1921 | ||
1922 | vpath = &vdev->vpaths[mac->vpath_no]; | |
1923 | status = vxge_hw_vpath_mac_addr_delete(vpath->handle, mac->macaddr, | |
1924 | mac->macmask); | |
1925 | if (status != VXGE_HW_OK) { | |
1926 | vxge_debug_init(VXGE_ERR, | |
1927 | "DA config delete entry failed for vpath:%d", | |
1928 | vpath->device_id); | |
1929 | } else | |
1930 | vxge_mac_list_del(vpath, mac); | |
1931 | return status; | |
1932 | } | |
1933 | ||
1934 | /* list all mac addresses from DA table */ | |
1935 | enum vxge_hw_status | |
1936 | static vxge_search_mac_addr_in_da_table(struct vxge_vpath *vpath, | |
1937 | struct macInfo *mac) | |
1938 | { | |
1939 | enum vxge_hw_status status = VXGE_HW_OK; | |
1940 | unsigned char macmask[ETH_ALEN]; | |
1941 | unsigned char macaddr[ETH_ALEN]; | |
1942 | ||
1943 | status = vxge_hw_vpath_mac_addr_get(vpath->handle, | |
1944 | macaddr, macmask); | |
1945 | if (status != VXGE_HW_OK) { | |
1946 | vxge_debug_init(VXGE_ERR, | |
1947 | "DA config list entry failed for vpath:%d", | |
1948 | vpath->device_id); | |
1949 | return status; | |
1950 | } | |
1951 | ||
1952 | while (memcmp(mac->macaddr, macaddr, ETH_ALEN)) { | |
1953 | ||
1954 | status = vxge_hw_vpath_mac_addr_get_next(vpath->handle, | |
1955 | macaddr, macmask); | |
1956 | if (status != VXGE_HW_OK) | |
1957 | break; | |
1958 | } | |
1959 | ||
1960 | return status; | |
1961 | } | |
1962 | ||
1963 | /* Store all vlan ids from the list to the vid table */ | |
1964 | enum vxge_hw_status vxge_restore_vpath_vid_table(struct vxge_vpath *vpath) | |
1965 | { | |
1966 | enum vxge_hw_status status = VXGE_HW_OK; | |
1967 | struct vxgedev *vdev = vpath->vdev; | |
1968 | u16 vid; | |
1969 | ||
1970 | if (vdev->vlgrp && vpath->is_open) { | |
1971 | ||
1972 | for (vid = 0; vid < VLAN_GROUP_ARRAY_LEN; vid++) { | |
1973 | if (!vlan_group_get_device(vdev->vlgrp, vid)) | |
1974 | continue; | |
1975 | /* Add these vlan to the vid table */ | |
1976 | status = vxge_hw_vpath_vid_add(vpath->handle, vid); | |
1977 | } | |
1978 | } | |
1979 | ||
1980 | return status; | |
1981 | } | |
1982 | ||
1983 | /* Store all mac addresses from the list to the DA table */ | |
1984 | enum vxge_hw_status vxge_restore_vpath_mac_addr(struct vxge_vpath *vpath) | |
1985 | { | |
1986 | enum vxge_hw_status status = VXGE_HW_OK; | |
1987 | struct macInfo mac_info; | |
1988 | u8 *mac_address = NULL; | |
1989 | struct list_head *entry, *next; | |
1990 | ||
1991 | memset(&mac_info, 0, sizeof(struct macInfo)); | |
1992 | ||
1993 | if (vpath->is_open) { | |
1994 | ||
1995 | list_for_each_safe(entry, next, &vpath->mac_addr_list) { | |
1996 | mac_address = | |
1997 | (u8 *)& | |
1998 | ((struct vxge_mac_addrs *)entry)->macaddr; | |
1999 | memcpy(mac_info.macaddr, mac_address, ETH_ALEN); | |
2000 | ((struct vxge_mac_addrs *)entry)->state = | |
2001 | VXGE_LL_MAC_ADDR_IN_DA_TABLE; | |
2002 | /* does this mac address already exist in da table? */ | |
2003 | status = vxge_search_mac_addr_in_da_table(vpath, | |
2004 | &mac_info); | |
2005 | if (status != VXGE_HW_OK) { | |
2006 | /* Add this mac address to the DA table */ | |
2007 | status = vxge_hw_vpath_mac_addr_add( | |
2008 | vpath->handle, mac_info.macaddr, | |
2009 | mac_info.macmask, | |
2010 | VXGE_HW_VPATH_MAC_ADDR_ADD_DUPLICATE); | |
2011 | if (status != VXGE_HW_OK) { | |
2012 | vxge_debug_init(VXGE_ERR, | |
2013 | "DA add entry failed for vpath:%d", | |
2014 | vpath->device_id); | |
2015 | ((struct vxge_mac_addrs *)entry)->state | |
2016 | = VXGE_LL_MAC_ADDR_IN_LIST; | |
2017 | } | |
2018 | } | |
2019 | } | |
2020 | } | |
2021 | ||
2022 | return status; | |
2023 | } | |
2024 | ||
2025 | /* reset vpaths */ | |
2026 | enum vxge_hw_status vxge_reset_all_vpaths(struct vxgedev *vdev) | |
2027 | { | |
2028 | int i; | |
2029 | enum vxge_hw_status status = VXGE_HW_OK; | |
2030 | ||
2031 | for (i = 0; i < vdev->no_of_vpath; i++) | |
2032 | if (vdev->vpaths[i].handle) { | |
2033 | if (vxge_hw_vpath_reset(vdev->vpaths[i].handle) | |
2034 | == VXGE_HW_OK) { | |
2035 | if (is_vxge_card_up(vdev) && | |
2036 | vxge_hw_vpath_recover_from_reset( | |
2037 | vdev->vpaths[i].handle) | |
2038 | != VXGE_HW_OK) { | |
2039 | vxge_debug_init(VXGE_ERR, | |
2040 | "vxge_hw_vpath_recover_" | |
2041 | "from_reset failed for vpath: " | |
2042 | "%d", i); | |
2043 | return status; | |
2044 | } | |
2045 | } else { | |
2046 | vxge_debug_init(VXGE_ERR, | |
2047 | "vxge_hw_vpath_reset failed for " | |
2048 | "vpath:%d", i); | |
2049 | return status; | |
2050 | } | |
2051 | } | |
2052 | return status; | |
2053 | } | |
2054 | ||
2055 | /* close vpaths */ | |
2056 | void vxge_close_vpaths(struct vxgedev *vdev, int index) | |
2057 | { | |
2058 | int i; | |
2059 | for (i = index; i < vdev->no_of_vpath; i++) { | |
2060 | if (vdev->vpaths[i].handle && vdev->vpaths[i].is_open) { | |
2061 | vxge_hw_vpath_close(vdev->vpaths[i].handle); | |
2062 | vdev->stats.vpaths_open--; | |
2063 | } | |
2064 | vdev->vpaths[i].is_open = 0; | |
2065 | vdev->vpaths[i].handle = NULL; | |
2066 | } | |
2067 | } | |
2068 | ||
2069 | /* open vpaths */ | |
2070 | int vxge_open_vpaths(struct vxgedev *vdev) | |
2071 | { | |
2072 | enum vxge_hw_status status; | |
2073 | int i; | |
2074 | u32 vp_id = 0; | |
2075 | struct vxge_hw_vpath_attr attr; | |
2076 | ||
2077 | for (i = 0; i < vdev->no_of_vpath; i++) { | |
2078 | vxge_assert(vdev->vpaths[i].is_configured); | |
2079 | attr.vp_id = vdev->vpaths[i].device_id; | |
2080 | attr.fifo_attr.callback = vxge_xmit_compl; | |
2081 | attr.fifo_attr.txdl_term = vxge_tx_term; | |
2082 | attr.fifo_attr.per_txdl_space = sizeof(struct vxge_tx_priv); | |
2083 | attr.fifo_attr.userdata = (void *)&vdev->vpaths[i].fifo; | |
2084 | ||
2085 | attr.ring_attr.callback = vxge_rx_1b_compl; | |
2086 | attr.ring_attr.rxd_init = vxge_rx_initial_replenish; | |
2087 | attr.ring_attr.rxd_term = vxge_rx_term; | |
2088 | attr.ring_attr.per_rxd_space = sizeof(struct vxge_rx_priv); | |
2089 | attr.ring_attr.userdata = (void *)&vdev->vpaths[i].ring; | |
2090 | ||
2091 | vdev->vpaths[i].ring.ndev = vdev->ndev; | |
2092 | vdev->vpaths[i].ring.pdev = vdev->pdev; | |
2093 | status = vxge_hw_vpath_open(vdev->devh, &attr, | |
2094 | &(vdev->vpaths[i].handle)); | |
2095 | if (status == VXGE_HW_OK) { | |
2096 | vdev->vpaths[i].fifo.handle = | |
2097 | (struct __vxge_hw_fifo *)attr.fifo_attr.userdata; | |
2098 | vdev->vpaths[i].ring.handle = | |
2099 | (struct __vxge_hw_ring *)attr.ring_attr.userdata; | |
2100 | vdev->vpaths[i].fifo.tx_steering_type = | |
2101 | vdev->config.tx_steering_type; | |
2102 | vdev->vpaths[i].fifo.ndev = vdev->ndev; | |
2103 | vdev->vpaths[i].fifo.pdev = vdev->pdev; | |
2104 | vdev->vpaths[i].fifo.indicate_max_pkts = | |
2105 | vdev->config.fifo_indicate_max_pkts; | |
2106 | vdev->vpaths[i].ring.rx_vector_no = 0; | |
2107 | vdev->vpaths[i].ring.rx_csum = vdev->rx_csum; | |
2108 | vdev->vpaths[i].is_open = 1; | |
2109 | vdev->vp_handles[i] = vdev->vpaths[i].handle; | |
2110 | vdev->vpaths[i].ring.gro_enable = | |
2111 | vdev->config.gro_enable; | |
2112 | vdev->vpaths[i].ring.vlan_tag_strip = | |
2113 | vdev->vlan_tag_strip; | |
2114 | vdev->stats.vpaths_open++; | |
2115 | } else { | |
2116 | vdev->stats.vpath_open_fail++; | |
2117 | vxge_debug_init(VXGE_ERR, | |
2118 | "%s: vpath: %d failed to open " | |
2119 | "with status: %d", | |
2120 | vdev->ndev->name, vdev->vpaths[i].device_id, | |
2121 | status); | |
2122 | vxge_close_vpaths(vdev, 0); | |
2123 | return -EPERM; | |
2124 | } | |
2125 | ||
2126 | vp_id = | |
2127 | ((struct __vxge_hw_vpath_handle *)vdev->vpaths[i].handle)-> | |
2128 | vpath->vp_id; | |
2129 | vdev->vpaths_deployed |= vxge_mBIT(vp_id); | |
2130 | } | |
2131 | return VXGE_HW_OK; | |
2132 | } | |
2133 | ||
2134 | /* | |
2135 | * vxge_isr_napi | |
2136 | * @irq: the irq of the device. | |
2137 | * @dev_id: a void pointer to the hldev structure of the Titan device | |
2138 | * @ptregs: pointer to the registers pushed on the stack. | |
2139 | * | |
2140 | * This function is the ISR handler of the device when napi is enabled. It | |
2141 | * identifies the reason for the interrupt and calls the relevant service | |
2142 | * routines. | |
2143 | */ | |
2144 | static irqreturn_t vxge_isr_napi(int irq, void *dev_id) | |
2145 | { | |
703da5a1 | 2146 | struct net_device *dev; |
a5d165b5 | 2147 | struct __vxge_hw_device *hldev; |
703da5a1 RV |
2148 | u64 reason; |
2149 | enum vxge_hw_status status; | |
a5d165b5 | 2150 | struct vxgedev *vdev = (struct vxgedev *) dev_id;; |
703da5a1 RV |
2151 | |
2152 | vxge_debug_intr(VXGE_TRACE, "%s:%d", __func__, __LINE__); | |
2153 | ||
a5d165b5 SH |
2154 | dev = vdev->ndev; |
2155 | hldev = (struct __vxge_hw_device *)pci_get_drvdata(vdev->pdev); | |
703da5a1 RV |
2156 | |
2157 | if (pci_channel_offline(vdev->pdev)) | |
2158 | return IRQ_NONE; | |
2159 | ||
2160 | if (unlikely(!is_vxge_card_up(vdev))) | |
2161 | return IRQ_NONE; | |
2162 | ||
2163 | status = vxge_hw_device_begin_irq(hldev, vdev->exec_mode, | |
2164 | &reason); | |
2165 | if (status == VXGE_HW_OK) { | |
2166 | vxge_hw_device_mask_all(hldev); | |
2167 | ||
2168 | if (reason & | |
2169 | VXGE_HW_TITAN_GENERAL_INT_STATUS_VPATH_TRAFFIC_INT( | |
2170 | vdev->vpaths_deployed >> | |
2171 | (64 - VXGE_HW_MAX_VIRTUAL_PATHS))) { | |
2172 | ||
2173 | vxge_hw_device_clear_tx_rx(hldev); | |
2174 | napi_schedule(&vdev->napi); | |
2175 | vxge_debug_intr(VXGE_TRACE, | |
2176 | "%s:%d Exiting...", __func__, __LINE__); | |
2177 | return IRQ_HANDLED; | |
2178 | } else | |
2179 | vxge_hw_device_unmask_all(hldev); | |
2180 | } else if (unlikely((status == VXGE_HW_ERR_VPATH) || | |
2181 | (status == VXGE_HW_ERR_CRITICAL) || | |
2182 | (status == VXGE_HW_ERR_FIFO))) { | |
2183 | vxge_hw_device_mask_all(hldev); | |
2184 | vxge_hw_device_flush_io(hldev); | |
2185 | return IRQ_HANDLED; | |
2186 | } else if (unlikely(status == VXGE_HW_ERR_SLOT_FREEZE)) | |
2187 | return IRQ_HANDLED; | |
2188 | ||
2189 | vxge_debug_intr(VXGE_TRACE, "%s:%d Exiting...", __func__, __LINE__); | |
2190 | return IRQ_NONE; | |
2191 | } | |
2192 | ||
2193 | #ifdef CONFIG_PCI_MSI | |
2194 | ||
2195 | static irqreturn_t | |
2196 | vxge_tx_msix_handle(int irq, void *dev_id) | |
2197 | { | |
2198 | struct vxge_fifo *fifo = (struct vxge_fifo *)dev_id; | |
2199 | ||
2200 | VXGE_COMPLETE_VPATH_TX(fifo); | |
2201 | ||
2202 | return IRQ_HANDLED; | |
2203 | } | |
2204 | ||
2205 | static irqreturn_t | |
2206 | vxge_rx_msix_napi_handle(int irq, void *dev_id) | |
2207 | { | |
2208 | struct vxge_ring *ring = (struct vxge_ring *)dev_id; | |
2209 | ||
2210 | /* MSIX_IDX for Rx is 1 */ | |
2211 | vxge_hw_channel_msix_mask((struct __vxge_hw_channel *)ring->handle, | |
2212 | ring->rx_vector_no); | |
2213 | ||
2214 | napi_schedule(&ring->napi); | |
2215 | return IRQ_HANDLED; | |
2216 | } | |
2217 | ||
2218 | static irqreturn_t | |
2219 | vxge_alarm_msix_handle(int irq, void *dev_id) | |
2220 | { | |
2221 | int i; | |
2222 | enum vxge_hw_status status; | |
2223 | struct vxge_vpath *vpath = (struct vxge_vpath *)dev_id; | |
2224 | struct vxgedev *vdev = vpath->vdev; | |
b59c9457 SH |
2225 | int msix_id = (vpath->handle->vpath->vp_id * |
2226 | VXGE_HW_VPATH_MSIX_ACTIVE) + VXGE_ALARM_MSIX_ID; | |
703da5a1 RV |
2227 | |
2228 | for (i = 0; i < vdev->no_of_vpath; i++) { | |
b59c9457 | 2229 | vxge_hw_vpath_msix_mask(vdev->vpaths[i].handle, msix_id); |
703da5a1 RV |
2230 | |
2231 | status = vxge_hw_vpath_alarm_process(vdev->vpaths[i].handle, | |
2232 | vdev->exec_mode); | |
2233 | if (status == VXGE_HW_OK) { | |
2234 | ||
2235 | vxge_hw_vpath_msix_unmask(vdev->vpaths[i].handle, | |
b59c9457 | 2236 | msix_id); |
703da5a1 RV |
2237 | continue; |
2238 | } | |
2239 | vxge_debug_intr(VXGE_ERR, | |
2240 | "%s: vxge_hw_vpath_alarm_process failed %x ", | |
2241 | VXGE_DRIVER_NAME, status); | |
2242 | } | |
2243 | return IRQ_HANDLED; | |
2244 | } | |
2245 | ||
2246 | static int vxge_alloc_msix(struct vxgedev *vdev) | |
2247 | { | |
2248 | int j, i, ret = 0; | |
b59c9457 | 2249 | int msix_intr_vect = 0, temp; |
703da5a1 RV |
2250 | vdev->intr_cnt = 0; |
2251 | ||
b59c9457 | 2252 | start: |
703da5a1 RV |
2253 | /* Tx/Rx MSIX Vectors count */ |
2254 | vdev->intr_cnt = vdev->no_of_vpath * 2; | |
2255 | ||
2256 | /* Alarm MSIX Vectors count */ | |
2257 | vdev->intr_cnt++; | |
2258 | ||
b59c9457 | 2259 | vdev->entries = kzalloc(vdev->intr_cnt * sizeof(struct msix_entry), |
703da5a1 RV |
2260 | GFP_KERNEL); |
2261 | if (!vdev->entries) { | |
2262 | vxge_debug_init(VXGE_ERR, | |
2263 | "%s: memory allocation failed", | |
2264 | VXGE_DRIVER_NAME); | |
cc413d90 MS |
2265 | ret = -ENOMEM; |
2266 | goto alloc_entries_failed; | |
703da5a1 RV |
2267 | } |
2268 | ||
b59c9457 SH |
2269 | vdev->vxge_entries = |
2270 | kzalloc(vdev->intr_cnt * sizeof(struct vxge_msix_entry), | |
2271 | GFP_KERNEL); | |
703da5a1 RV |
2272 | if (!vdev->vxge_entries) { |
2273 | vxge_debug_init(VXGE_ERR, "%s: memory allocation failed", | |
2274 | VXGE_DRIVER_NAME); | |
cc413d90 MS |
2275 | ret = -ENOMEM; |
2276 | goto alloc_vxge_entries_failed; | |
703da5a1 RV |
2277 | } |
2278 | ||
b59c9457 | 2279 | for (i = 0, j = 0; i < vdev->no_of_vpath; i++) { |
703da5a1 RV |
2280 | |
2281 | msix_intr_vect = i * VXGE_HW_VPATH_MSIX_ACTIVE; | |
2282 | ||
2283 | /* Initialize the fifo vector */ | |
2284 | vdev->entries[j].entry = msix_intr_vect; | |
2285 | vdev->vxge_entries[j].entry = msix_intr_vect; | |
2286 | vdev->vxge_entries[j].in_use = 0; | |
2287 | j++; | |
2288 | ||
2289 | /* Initialize the ring vector */ | |
2290 | vdev->entries[j].entry = msix_intr_vect + 1; | |
2291 | vdev->vxge_entries[j].entry = msix_intr_vect + 1; | |
2292 | vdev->vxge_entries[j].in_use = 0; | |
2293 | j++; | |
2294 | } | |
2295 | ||
2296 | /* Initialize the alarm vector */ | |
b59c9457 SH |
2297 | vdev->entries[j].entry = VXGE_ALARM_MSIX_ID; |
2298 | vdev->vxge_entries[j].entry = VXGE_ALARM_MSIX_ID; | |
703da5a1 RV |
2299 | vdev->vxge_entries[j].in_use = 0; |
2300 | ||
b59c9457 | 2301 | ret = pci_enable_msix(vdev->pdev, vdev->entries, vdev->intr_cnt); |
703da5a1 | 2302 | |
b59c9457 | 2303 | if (ret > 0) { |
703da5a1 RV |
2304 | vxge_debug_init(VXGE_ERR, |
2305 | "%s: MSI-X enable failed for %d vectors, ret: %d", | |
b59c9457 | 2306 | VXGE_DRIVER_NAME, vdev->intr_cnt, ret); |
cc413d90 MS |
2307 | if ((max_config_vpath != VXGE_USE_DEFAULT) || (ret < 3)) { |
2308 | ret = -ENODEV; | |
2309 | goto enable_msix_failed; | |
2310 | } | |
2311 | ||
703da5a1 RV |
2312 | kfree(vdev->entries); |
2313 | kfree(vdev->vxge_entries); | |
2314 | vdev->entries = NULL; | |
2315 | vdev->vxge_entries = NULL; | |
b59c9457 SH |
2316 | /* Try with less no of vector by reducing no of vpaths count */ |
2317 | temp = (ret - 1)/2; | |
2318 | vxge_close_vpaths(vdev, temp); | |
2319 | vdev->no_of_vpath = temp; | |
2320 | goto start; | |
cc413d90 MS |
2321 | } else if (ret < 0) { |
2322 | ret = -ENODEV; | |
2323 | goto enable_msix_failed; | |
2324 | } | |
703da5a1 | 2325 | return 0; |
cc413d90 MS |
2326 | |
2327 | enable_msix_failed: | |
2328 | kfree(vdev->vxge_entries); | |
2329 | alloc_vxge_entries_failed: | |
2330 | kfree(vdev->entries); | |
2331 | alloc_entries_failed: | |
2332 | return ret; | |
703da5a1 RV |
2333 | } |
2334 | ||
2335 | static int vxge_enable_msix(struct vxgedev *vdev) | |
2336 | { | |
2337 | ||
2338 | int i, ret = 0; | |
703da5a1 | 2339 | /* 0 - Tx, 1 - Rx */ |
b59c9457 SH |
2340 | int tim_msix_id[4] = {0, 1, 0, 0}; |
2341 | ||
703da5a1 RV |
2342 | vdev->intr_cnt = 0; |
2343 | ||
2344 | /* allocate msix vectors */ | |
2345 | ret = vxge_alloc_msix(vdev); | |
2346 | if (!ret) { | |
703da5a1 RV |
2347 | for (i = 0; i < vdev->no_of_vpath; i++) { |
2348 | ||
2349 | /* If fifo or ring are not enabled | |
2350 | the MSIX vector for that should be set to 0 | |
2351 | Hence initializeing this array to all 0s. | |
2352 | */ | |
b59c9457 SH |
2353 | vdev->vpaths[i].ring.rx_vector_no = |
2354 | (vdev->vpaths[i].device_id * | |
2355 | VXGE_HW_VPATH_MSIX_ACTIVE) + 1; | |
703da5a1 | 2356 | |
b59c9457 SH |
2357 | vxge_hw_vpath_msix_set(vdev->vpaths[i].handle, |
2358 | tim_msix_id, VXGE_ALARM_MSIX_ID); | |
703da5a1 RV |
2359 | } |
2360 | } | |
2361 | ||
2362 | return ret; | |
2363 | } | |
2364 | ||
2365 | static void vxge_rem_msix_isr(struct vxgedev *vdev) | |
2366 | { | |
2367 | int intr_cnt; | |
2368 | ||
b59c9457 | 2369 | for (intr_cnt = 0; intr_cnt < (vdev->no_of_vpath * 2 + 1); |
703da5a1 RV |
2370 | intr_cnt++) { |
2371 | if (vdev->vxge_entries[intr_cnt].in_use) { | |
2372 | synchronize_irq(vdev->entries[intr_cnt].vector); | |
2373 | free_irq(vdev->entries[intr_cnt].vector, | |
2374 | vdev->vxge_entries[intr_cnt].arg); | |
2375 | vdev->vxge_entries[intr_cnt].in_use = 0; | |
2376 | } | |
2377 | } | |
2378 | ||
2379 | kfree(vdev->entries); | |
2380 | kfree(vdev->vxge_entries); | |
2381 | vdev->entries = NULL; | |
2382 | vdev->vxge_entries = NULL; | |
2383 | ||
2384 | if (vdev->config.intr_type == MSI_X) | |
2385 | pci_disable_msix(vdev->pdev); | |
2386 | } | |
2387 | #endif | |
2388 | ||
2389 | static void vxge_rem_isr(struct vxgedev *vdev) | |
2390 | { | |
2391 | struct __vxge_hw_device *hldev; | |
2392 | hldev = (struct __vxge_hw_device *) pci_get_drvdata(vdev->pdev); | |
2393 | ||
2394 | #ifdef CONFIG_PCI_MSI | |
2395 | if (vdev->config.intr_type == MSI_X) { | |
2396 | vxge_rem_msix_isr(vdev); | |
2397 | } else | |
2398 | #endif | |
2399 | if (vdev->config.intr_type == INTA) { | |
2400 | synchronize_irq(vdev->pdev->irq); | |
a5d165b5 | 2401 | free_irq(vdev->pdev->irq, vdev); |
703da5a1 RV |
2402 | } |
2403 | } | |
2404 | ||
2405 | static int vxge_add_isr(struct vxgedev *vdev) | |
2406 | { | |
2407 | int ret = 0; | |
703da5a1 RV |
2408 | #ifdef CONFIG_PCI_MSI |
2409 | int vp_idx = 0, intr_idx = 0, intr_cnt = 0, msix_idx = 0, irq_req = 0; | |
703da5a1 RV |
2410 | int pci_fun = PCI_FUNC(vdev->pdev->devfn); |
2411 | ||
2412 | if (vdev->config.intr_type == MSI_X) | |
2413 | ret = vxge_enable_msix(vdev); | |
2414 | ||
2415 | if (ret) { | |
2416 | vxge_debug_init(VXGE_ERR, | |
2417 | "%s: Enabling MSI-X Failed", VXGE_DRIVER_NAME); | |
eb5f10c2 SH |
2418 | vxge_debug_init(VXGE_ERR, |
2419 | "%s: Defaulting to INTA", VXGE_DRIVER_NAME); | |
2420 | vdev->config.intr_type = INTA; | |
703da5a1 RV |
2421 | } |
2422 | ||
2423 | if (vdev->config.intr_type == MSI_X) { | |
2424 | for (intr_idx = 0; | |
2425 | intr_idx < (vdev->no_of_vpath * | |
2426 | VXGE_HW_VPATH_MSIX_ACTIVE); intr_idx++) { | |
2427 | ||
2428 | msix_idx = intr_idx % VXGE_HW_VPATH_MSIX_ACTIVE; | |
2429 | irq_req = 0; | |
2430 | ||
2431 | switch (msix_idx) { | |
2432 | case 0: | |
2433 | snprintf(vdev->desc[intr_cnt], VXGE_INTR_STRLEN, | |
b59c9457 SH |
2434 | "%s:vxge:MSI-X %d - Tx - fn:%d vpath:%d", |
2435 | vdev->ndev->name, | |
2436 | vdev->entries[intr_cnt].entry, | |
2437 | pci_fun, vp_idx); | |
703da5a1 RV |
2438 | ret = request_irq( |
2439 | vdev->entries[intr_cnt].vector, | |
2440 | vxge_tx_msix_handle, 0, | |
2441 | vdev->desc[intr_cnt], | |
2442 | &vdev->vpaths[vp_idx].fifo); | |
2443 | vdev->vxge_entries[intr_cnt].arg = | |
2444 | &vdev->vpaths[vp_idx].fifo; | |
2445 | irq_req = 1; | |
2446 | break; | |
2447 | case 1: | |
2448 | snprintf(vdev->desc[intr_cnt], VXGE_INTR_STRLEN, | |
b59c9457 SH |
2449 | "%s:vxge:MSI-X %d - Rx - fn:%d vpath:%d", |
2450 | vdev->ndev->name, | |
2451 | vdev->entries[intr_cnt].entry, | |
2452 | pci_fun, vp_idx); | |
703da5a1 RV |
2453 | ret = request_irq( |
2454 | vdev->entries[intr_cnt].vector, | |
2455 | vxge_rx_msix_napi_handle, | |
2456 | 0, | |
2457 | vdev->desc[intr_cnt], | |
2458 | &vdev->vpaths[vp_idx].ring); | |
2459 | vdev->vxge_entries[intr_cnt].arg = | |
2460 | &vdev->vpaths[vp_idx].ring; | |
2461 | irq_req = 1; | |
2462 | break; | |
2463 | } | |
2464 | ||
2465 | if (ret) { | |
2466 | vxge_debug_init(VXGE_ERR, | |
2467 | "%s: MSIX - %d Registration failed", | |
2468 | vdev->ndev->name, intr_cnt); | |
2469 | vxge_rem_msix_isr(vdev); | |
eb5f10c2 SH |
2470 | vdev->config.intr_type = INTA; |
2471 | vxge_debug_init(VXGE_ERR, | |
2472 | "%s: Defaulting to INTA" | |
2473 | , vdev->ndev->name); | |
703da5a1 | 2474 | goto INTA_MODE; |
703da5a1 RV |
2475 | } |
2476 | ||
2477 | if (irq_req) { | |
2478 | /* We requested for this msix interrupt */ | |
2479 | vdev->vxge_entries[intr_cnt].in_use = 1; | |
b59c9457 SH |
2480 | msix_idx += vdev->vpaths[vp_idx].device_id * |
2481 | VXGE_HW_VPATH_MSIX_ACTIVE; | |
703da5a1 RV |
2482 | vxge_hw_vpath_msix_unmask( |
2483 | vdev->vpaths[vp_idx].handle, | |
b59c9457 | 2484 | msix_idx); |
703da5a1 RV |
2485 | intr_cnt++; |
2486 | } | |
2487 | ||
2488 | /* Point to next vpath handler */ | |
8e95a202 JP |
2489 | if (((intr_idx + 1) % VXGE_HW_VPATH_MSIX_ACTIVE == 0) && |
2490 | (vp_idx < (vdev->no_of_vpath - 1))) | |
2491 | vp_idx++; | |
703da5a1 RV |
2492 | } |
2493 | ||
b59c9457 | 2494 | intr_cnt = vdev->no_of_vpath * 2; |
703da5a1 | 2495 | snprintf(vdev->desc[intr_cnt], VXGE_INTR_STRLEN, |
b59c9457 SH |
2496 | "%s:vxge:MSI-X %d - Alarm - fn:%d", |
2497 | vdev->ndev->name, | |
2498 | vdev->entries[intr_cnt].entry, | |
2499 | pci_fun); | |
703da5a1 RV |
2500 | /* For Alarm interrupts */ |
2501 | ret = request_irq(vdev->entries[intr_cnt].vector, | |
2502 | vxge_alarm_msix_handle, 0, | |
2503 | vdev->desc[intr_cnt], | |
b59c9457 | 2504 | &vdev->vpaths[0]); |
703da5a1 RV |
2505 | if (ret) { |
2506 | vxge_debug_init(VXGE_ERR, | |
2507 | "%s: MSIX - %d Registration failed", | |
2508 | vdev->ndev->name, intr_cnt); | |
2509 | vxge_rem_msix_isr(vdev); | |
eb5f10c2 SH |
2510 | vdev->config.intr_type = INTA; |
2511 | vxge_debug_init(VXGE_ERR, | |
2512 | "%s: Defaulting to INTA", | |
2513 | vdev->ndev->name); | |
703da5a1 | 2514 | goto INTA_MODE; |
703da5a1 RV |
2515 | } |
2516 | ||
b59c9457 SH |
2517 | msix_idx = (vdev->vpaths[0].handle->vpath->vp_id * |
2518 | VXGE_HW_VPATH_MSIX_ACTIVE) + VXGE_ALARM_MSIX_ID; | |
703da5a1 | 2519 | vxge_hw_vpath_msix_unmask(vdev->vpaths[vp_idx].handle, |
b59c9457 | 2520 | msix_idx); |
703da5a1 | 2521 | vdev->vxge_entries[intr_cnt].in_use = 1; |
b59c9457 | 2522 | vdev->vxge_entries[intr_cnt].arg = &vdev->vpaths[0]; |
703da5a1 RV |
2523 | } |
2524 | INTA_MODE: | |
2525 | #endif | |
703da5a1 RV |
2526 | |
2527 | if (vdev->config.intr_type == INTA) { | |
b59c9457 SH |
2528 | snprintf(vdev->desc[0], VXGE_INTR_STRLEN, |
2529 | "%s:vxge:INTA", vdev->ndev->name); | |
eb5f10c2 SH |
2530 | vxge_hw_device_set_intr_type(vdev->devh, |
2531 | VXGE_HW_INTR_MODE_IRQLINE); | |
2532 | vxge_hw_vpath_tti_ci_set(vdev->devh, | |
2533 | vdev->vpaths[0].device_id); | |
703da5a1 RV |
2534 | ret = request_irq((int) vdev->pdev->irq, |
2535 | vxge_isr_napi, | |
a5d165b5 | 2536 | IRQF_SHARED, vdev->desc[0], vdev); |
703da5a1 RV |
2537 | if (ret) { |
2538 | vxge_debug_init(VXGE_ERR, | |
2539 | "%s %s-%d: ISR registration failed", | |
2540 | VXGE_DRIVER_NAME, "IRQ", vdev->pdev->irq); | |
2541 | return -ENODEV; | |
2542 | } | |
2543 | vxge_debug_init(VXGE_TRACE, | |
2544 | "new %s-%d line allocated", | |
2545 | "IRQ", vdev->pdev->irq); | |
2546 | } | |
2547 | ||
2548 | return VXGE_HW_OK; | |
2549 | } | |
2550 | ||
2551 | static void vxge_poll_vp_reset(unsigned long data) | |
2552 | { | |
2553 | struct vxgedev *vdev = (struct vxgedev *)data; | |
2554 | int i, j = 0; | |
2555 | ||
2556 | for (i = 0; i < vdev->no_of_vpath; i++) { | |
2557 | if (test_bit(i, &vdev->vp_reset)) { | |
2558 | vxge_reset_vpath(vdev, i); | |
2559 | j++; | |
2560 | } | |
2561 | } | |
2562 | if (j && (vdev->config.intr_type != MSI_X)) { | |
2563 | vxge_hw_device_unmask_all(vdev->devh); | |
2564 | vxge_hw_device_flush_io(vdev->devh); | |
2565 | } | |
2566 | ||
2567 | mod_timer(&vdev->vp_reset_timer, jiffies + HZ / 2); | |
2568 | } | |
2569 | ||
2570 | static void vxge_poll_vp_lockup(unsigned long data) | |
2571 | { | |
2572 | struct vxgedev *vdev = (struct vxgedev *)data; | |
2573 | int i; | |
2574 | struct vxge_ring *ring; | |
2575 | enum vxge_hw_status status = VXGE_HW_OK; | |
2576 | ||
2577 | for (i = 0; i < vdev->no_of_vpath; i++) { | |
2578 | ring = &vdev->vpaths[i].ring; | |
2579 | /* Did this vpath received any packets */ | |
2580 | if (ring->stats.prev_rx_frms == ring->stats.rx_frms) { | |
2581 | status = vxge_hw_vpath_check_leak(ring->handle); | |
2582 | ||
2583 | /* Did it received any packets last time */ | |
2584 | if ((VXGE_HW_FAIL == status) && | |
2585 | (VXGE_HW_FAIL == ring->last_status)) { | |
2586 | ||
2587 | /* schedule vpath reset */ | |
2588 | if (!test_and_set_bit(i, &vdev->vp_reset)) { | |
2589 | ||
2590 | /* disable interrupts for this vpath */ | |
2591 | vxge_vpath_intr_disable(vdev, i); | |
2592 | ||
2593 | /* stop the queue for this vpath */ | |
2594 | vxge_stop_tx_queue(&vdev->vpaths[i]. | |
2595 | fifo); | |
2596 | continue; | |
2597 | } | |
2598 | } | |
2599 | } | |
2600 | ring->stats.prev_rx_frms = ring->stats.rx_frms; | |
2601 | ring->last_status = status; | |
2602 | } | |
2603 | ||
2604 | /* Check every 1 milli second */ | |
2605 | mod_timer(&vdev->vp_lockup_timer, jiffies + HZ / 1000); | |
2606 | } | |
2607 | ||
2608 | /** | |
2609 | * vxge_open | |
2610 | * @dev: pointer to the device structure. | |
2611 | * | |
2612 | * This function is the open entry point of the driver. It mainly calls a | |
2613 | * function to allocate Rx buffers and inserts them into the buffer | |
2614 | * descriptors and then enables the Rx part of the NIC. | |
2615 | * Return value: '0' on success and an appropriate (-)ve integer as | |
2616 | * defined in errno.h file on failure. | |
2617 | */ | |
2618 | int | |
2619 | vxge_open(struct net_device *dev) | |
2620 | { | |
2621 | enum vxge_hw_status status; | |
2622 | struct vxgedev *vdev; | |
2623 | struct __vxge_hw_device *hldev; | |
2624 | int ret = 0; | |
2625 | int i; | |
2626 | u64 val64, function_mode; | |
2627 | vxge_debug_entryexit(VXGE_TRACE, | |
2628 | "%s: %s:%d", dev->name, __func__, __LINE__); | |
2629 | ||
2630 | vdev = (struct vxgedev *)netdev_priv(dev); | |
2631 | hldev = (struct __vxge_hw_device *) pci_get_drvdata(vdev->pdev); | |
2632 | function_mode = vdev->config.device_hw_info.function_mode; | |
2633 | ||
2634 | /* make sure you have link off by default every time Nic is | |
2635 | * initialized */ | |
2636 | netif_carrier_off(dev); | |
2637 | ||
703da5a1 RV |
2638 | /* Open VPATHs */ |
2639 | status = vxge_open_vpaths(vdev); | |
2640 | if (status != VXGE_HW_OK) { | |
2641 | vxge_debug_init(VXGE_ERR, | |
2642 | "%s: fatal: Vpath open failed", vdev->ndev->name); | |
2643 | ret = -EPERM; | |
2644 | goto out0; | |
2645 | } | |
2646 | ||
2647 | vdev->mtu = dev->mtu; | |
2648 | ||
2649 | status = vxge_add_isr(vdev); | |
2650 | if (status != VXGE_HW_OK) { | |
2651 | vxge_debug_init(VXGE_ERR, | |
2652 | "%s: fatal: ISR add failed", dev->name); | |
2653 | ret = -EPERM; | |
2654 | goto out1; | |
2655 | } | |
2656 | ||
2657 | ||
2658 | if (vdev->config.intr_type != MSI_X) { | |
2659 | netif_napi_add(dev, &vdev->napi, vxge_poll_inta, | |
2660 | vdev->config.napi_weight); | |
2661 | napi_enable(&vdev->napi); | |
a5d165b5 SH |
2662 | for (i = 0; i < vdev->no_of_vpath; i++) |
2663 | vdev->vpaths[i].ring.napi_p = &vdev->napi; | |
703da5a1 RV |
2664 | } else { |
2665 | for (i = 0; i < vdev->no_of_vpath; i++) { | |
2666 | netif_napi_add(dev, &vdev->vpaths[i].ring.napi, | |
2667 | vxge_poll_msix, vdev->config.napi_weight); | |
2668 | napi_enable(&vdev->vpaths[i].ring.napi); | |
a5d165b5 SH |
2669 | vdev->vpaths[i].ring.napi_p = |
2670 | &vdev->vpaths[i].ring.napi; | |
703da5a1 RV |
2671 | } |
2672 | } | |
2673 | ||
2674 | /* configure RTH */ | |
2675 | if (vdev->config.rth_steering) { | |
2676 | status = vxge_rth_configure(vdev); | |
2677 | if (status != VXGE_HW_OK) { | |
2678 | vxge_debug_init(VXGE_ERR, | |
2679 | "%s: fatal: RTH configuration failed", | |
2680 | dev->name); | |
2681 | ret = -EPERM; | |
2682 | goto out2; | |
2683 | } | |
2684 | } | |
2685 | ||
2686 | for (i = 0; i < vdev->no_of_vpath; i++) { | |
2687 | /* set initial mtu before enabling the device */ | |
2688 | status = vxge_hw_vpath_mtu_set(vdev->vpaths[i].handle, | |
2689 | vdev->mtu); | |
2690 | if (status != VXGE_HW_OK) { | |
2691 | vxge_debug_init(VXGE_ERR, | |
2692 | "%s: fatal: can not set new MTU", dev->name); | |
2693 | ret = -EPERM; | |
2694 | goto out2; | |
2695 | } | |
2696 | } | |
2697 | ||
2698 | VXGE_DEVICE_DEBUG_LEVEL_SET(VXGE_TRACE, VXGE_COMPONENT_LL, vdev); | |
2699 | vxge_debug_init(vdev->level_trace, | |
2700 | "%s: MTU is %d", vdev->ndev->name, vdev->mtu); | |
2701 | VXGE_DEVICE_DEBUG_LEVEL_SET(VXGE_ERR, VXGE_COMPONENT_LL, vdev); | |
2702 | ||
2703 | /* Reprogram the DA table with populated mac addresses */ | |
2704 | for (i = 0; i < vdev->no_of_vpath; i++) { | |
2705 | vxge_restore_vpath_mac_addr(&vdev->vpaths[i]); | |
2706 | vxge_restore_vpath_vid_table(&vdev->vpaths[i]); | |
2707 | } | |
2708 | ||
2709 | /* Enable vpath to sniff all unicast/multicast traffic that not | |
2710 | * addressed to them. We allow promiscous mode for PF only | |
2711 | */ | |
2712 | ||
2713 | val64 = 0; | |
2714 | for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) | |
2715 | val64 |= VXGE_HW_RXMAC_AUTHORIZE_ALL_ADDR_VP(i); | |
2716 | ||
2717 | vxge_hw_mgmt_reg_write(vdev->devh, | |
2718 | vxge_hw_mgmt_reg_type_mrpcim, | |
2719 | 0, | |
2720 | (ulong)offsetof(struct vxge_hw_mrpcim_reg, | |
2721 | rxmac_authorize_all_addr), | |
2722 | val64); | |
2723 | ||
2724 | vxge_hw_mgmt_reg_write(vdev->devh, | |
2725 | vxge_hw_mgmt_reg_type_mrpcim, | |
2726 | 0, | |
2727 | (ulong)offsetof(struct vxge_hw_mrpcim_reg, | |
2728 | rxmac_authorize_all_vid), | |
2729 | val64); | |
2730 | ||
2731 | vxge_set_multicast(dev); | |
2732 | ||
2733 | /* Enabling Bcast and mcast for all vpath */ | |
2734 | for (i = 0; i < vdev->no_of_vpath; i++) { | |
2735 | status = vxge_hw_vpath_bcast_enable(vdev->vpaths[i].handle); | |
2736 | if (status != VXGE_HW_OK) | |
2737 | vxge_debug_init(VXGE_ERR, | |
2738 | "%s : Can not enable bcast for vpath " | |
2739 | "id %d", dev->name, i); | |
2740 | if (vdev->config.addr_learn_en) { | |
2741 | status = | |
2742 | vxge_hw_vpath_mcast_enable(vdev->vpaths[i].handle); | |
2743 | if (status != VXGE_HW_OK) | |
2744 | vxge_debug_init(VXGE_ERR, | |
2745 | "%s : Can not enable mcast for vpath " | |
2746 | "id %d", dev->name, i); | |
2747 | } | |
2748 | } | |
2749 | ||
2750 | vxge_hw_device_setpause_data(vdev->devh, 0, | |
2751 | vdev->config.tx_pause_enable, | |
2752 | vdev->config.rx_pause_enable); | |
2753 | ||
2754 | if (vdev->vp_reset_timer.function == NULL) | |
2755 | vxge_os_timer(vdev->vp_reset_timer, | |
2756 | vxge_poll_vp_reset, vdev, (HZ/2)); | |
2757 | ||
2758 | if (vdev->vp_lockup_timer.function == NULL) | |
2759 | vxge_os_timer(vdev->vp_lockup_timer, | |
2760 | vxge_poll_vp_lockup, vdev, (HZ/2)); | |
2761 | ||
2762 | set_bit(__VXGE_STATE_CARD_UP, &vdev->state); | |
2763 | ||
2764 | smp_wmb(); | |
2765 | ||
2766 | if (vxge_hw_device_link_state_get(vdev->devh) == VXGE_HW_LINK_UP) { | |
2767 | netif_carrier_on(vdev->ndev); | |
2768 | printk(KERN_NOTICE "%s: Link Up\n", vdev->ndev->name); | |
2769 | vdev->stats.link_up++; | |
2770 | } | |
2771 | ||
2772 | vxge_hw_device_intr_enable(vdev->devh); | |
2773 | ||
2774 | smp_wmb(); | |
2775 | ||
2776 | for (i = 0; i < vdev->no_of_vpath; i++) { | |
2777 | vxge_hw_vpath_enable(vdev->vpaths[i].handle); | |
2778 | smp_wmb(); | |
2779 | vxge_hw_vpath_rx_doorbell_init(vdev->vpaths[i].handle); | |
2780 | } | |
2781 | ||
2782 | vxge_start_all_tx_queue(vdev); | |
2783 | goto out0; | |
2784 | ||
2785 | out2: | |
2786 | vxge_rem_isr(vdev); | |
2787 | ||
2788 | /* Disable napi */ | |
2789 | if (vdev->config.intr_type != MSI_X) | |
2790 | napi_disable(&vdev->napi); | |
2791 | else { | |
2792 | for (i = 0; i < vdev->no_of_vpath; i++) | |
2793 | napi_disable(&vdev->vpaths[i].ring.napi); | |
2794 | } | |
2795 | ||
2796 | out1: | |
2797 | vxge_close_vpaths(vdev, 0); | |
2798 | out0: | |
2799 | vxge_debug_entryexit(VXGE_TRACE, | |
2800 | "%s: %s:%d Exiting...", | |
2801 | dev->name, __func__, __LINE__); | |
2802 | return ret; | |
2803 | } | |
2804 | ||
2805 | /* Loop throught the mac address list and delete all the entries */ | |
2806 | void vxge_free_mac_add_list(struct vxge_vpath *vpath) | |
2807 | { | |
2808 | ||
2809 | struct list_head *entry, *next; | |
2810 | if (list_empty(&vpath->mac_addr_list)) | |
2811 | return; | |
2812 | ||
2813 | list_for_each_safe(entry, next, &vpath->mac_addr_list) { | |
2814 | list_del(entry); | |
2815 | kfree((struct vxge_mac_addrs *)entry); | |
2816 | } | |
2817 | } | |
2818 | ||
2819 | static void vxge_napi_del_all(struct vxgedev *vdev) | |
2820 | { | |
2821 | int i; | |
2822 | if (vdev->config.intr_type != MSI_X) | |
2823 | netif_napi_del(&vdev->napi); | |
2824 | else { | |
2825 | for (i = 0; i < vdev->no_of_vpath; i++) | |
2826 | netif_napi_del(&vdev->vpaths[i].ring.napi); | |
2827 | } | |
703da5a1 RV |
2828 | } |
2829 | ||
2830 | int do_vxge_close(struct net_device *dev, int do_io) | |
2831 | { | |
2832 | enum vxge_hw_status status; | |
2833 | struct vxgedev *vdev; | |
2834 | struct __vxge_hw_device *hldev; | |
2835 | int i; | |
2836 | u64 val64, vpath_vector; | |
2837 | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | |
2838 | dev->name, __func__, __LINE__); | |
2839 | ||
2840 | vdev = (struct vxgedev *)netdev_priv(dev); | |
2841 | hldev = (struct __vxge_hw_device *) pci_get_drvdata(vdev->pdev); | |
2842 | ||
bd9ee680 SH |
2843 | if (unlikely(!is_vxge_card_up(vdev))) |
2844 | return 0; | |
2845 | ||
703da5a1 RV |
2846 | /* If vxge_handle_crit_err task is executing, |
2847 | * wait till it completes. */ | |
2848 | while (test_and_set_bit(__VXGE_STATE_RESET_CARD, &vdev->state)) | |
2849 | msleep(50); | |
2850 | ||
2851 | clear_bit(__VXGE_STATE_CARD_UP, &vdev->state); | |
2852 | if (do_io) { | |
2853 | /* Put the vpath back in normal mode */ | |
2854 | vpath_vector = vxge_mBIT(vdev->vpaths[0].device_id); | |
2855 | status = vxge_hw_mgmt_reg_read(vdev->devh, | |
2856 | vxge_hw_mgmt_reg_type_mrpcim, | |
2857 | 0, | |
2858 | (ulong)offsetof( | |
2859 | struct vxge_hw_mrpcim_reg, | |
2860 | rts_mgr_cbasin_cfg), | |
2861 | &val64); | |
2862 | ||
2863 | if (status == VXGE_HW_OK) { | |
2864 | val64 &= ~vpath_vector; | |
2865 | status = vxge_hw_mgmt_reg_write(vdev->devh, | |
2866 | vxge_hw_mgmt_reg_type_mrpcim, | |
2867 | 0, | |
2868 | (ulong)offsetof( | |
2869 | struct vxge_hw_mrpcim_reg, | |
2870 | rts_mgr_cbasin_cfg), | |
2871 | val64); | |
2872 | } | |
2873 | ||
2874 | /* Remove the function 0 from promiscous mode */ | |
2875 | vxge_hw_mgmt_reg_write(vdev->devh, | |
2876 | vxge_hw_mgmt_reg_type_mrpcim, | |
2877 | 0, | |
2878 | (ulong)offsetof(struct vxge_hw_mrpcim_reg, | |
2879 | rxmac_authorize_all_addr), | |
2880 | 0); | |
2881 | ||
2882 | vxge_hw_mgmt_reg_write(vdev->devh, | |
2883 | vxge_hw_mgmt_reg_type_mrpcim, | |
2884 | 0, | |
2885 | (ulong)offsetof(struct vxge_hw_mrpcim_reg, | |
2886 | rxmac_authorize_all_vid), | |
2887 | 0); | |
2888 | ||
2889 | smp_wmb(); | |
2890 | } | |
2891 | del_timer_sync(&vdev->vp_lockup_timer); | |
2892 | ||
2893 | del_timer_sync(&vdev->vp_reset_timer); | |
2894 | ||
2895 | /* Disable napi */ | |
2896 | if (vdev->config.intr_type != MSI_X) | |
2897 | napi_disable(&vdev->napi); | |
2898 | else { | |
2899 | for (i = 0; i < vdev->no_of_vpath; i++) | |
2900 | napi_disable(&vdev->vpaths[i].ring.napi); | |
2901 | } | |
2902 | ||
2903 | netif_carrier_off(vdev->ndev); | |
2904 | printk(KERN_NOTICE "%s: Link Down\n", vdev->ndev->name); | |
2905 | vxge_stop_all_tx_queue(vdev); | |
2906 | ||
2907 | /* Note that at this point xmit() is stopped by upper layer */ | |
2908 | if (do_io) | |
2909 | vxge_hw_device_intr_disable(vdev->devh); | |
2910 | ||
2911 | mdelay(1000); | |
2912 | ||
2913 | vxge_rem_isr(vdev); | |
2914 | ||
2915 | vxge_napi_del_all(vdev); | |
2916 | ||
2917 | if (do_io) | |
2918 | vxge_reset_all_vpaths(vdev); | |
2919 | ||
2920 | vxge_close_vpaths(vdev, 0); | |
2921 | ||
2922 | vxge_debug_entryexit(VXGE_TRACE, | |
2923 | "%s: %s:%d Exiting...", dev->name, __func__, __LINE__); | |
2924 | ||
703da5a1 RV |
2925 | clear_bit(__VXGE_STATE_RESET_CARD, &vdev->state); |
2926 | ||
2927 | return 0; | |
2928 | } | |
2929 | ||
2930 | /** | |
2931 | * vxge_close | |
2932 | * @dev: device pointer. | |
2933 | * | |
2934 | * This is the stop entry point of the driver. It needs to undo exactly | |
2935 | * whatever was done by the open entry point, thus it's usually referred to | |
2936 | * as the close function.Among other things this function mainly stops the | |
2937 | * Rx side of the NIC and frees all the Rx buffers in the Rx rings. | |
2938 | * Return value: '0' on success and an appropriate (-)ve integer as | |
2939 | * defined in errno.h file on failure. | |
2940 | */ | |
2941 | int | |
2942 | vxge_close(struct net_device *dev) | |
2943 | { | |
2944 | do_vxge_close(dev, 1); | |
2945 | return 0; | |
2946 | } | |
2947 | ||
2948 | /** | |
2949 | * vxge_change_mtu | |
2950 | * @dev: net device pointer. | |
2951 | * @new_mtu :the new MTU size for the device. | |
2952 | * | |
2953 | * A driver entry point to change MTU size for the device. Before changing | |
2954 | * the MTU the device must be stopped. | |
2955 | */ | |
2956 | static int vxge_change_mtu(struct net_device *dev, int new_mtu) | |
2957 | { | |
2958 | struct vxgedev *vdev = netdev_priv(dev); | |
2959 | ||
2960 | vxge_debug_entryexit(vdev->level_trace, | |
2961 | "%s:%d", __func__, __LINE__); | |
2962 | if ((new_mtu < VXGE_HW_MIN_MTU) || (new_mtu > VXGE_HW_MAX_MTU)) { | |
2963 | vxge_debug_init(vdev->level_err, | |
2964 | "%s: mtu size is invalid", dev->name); | |
2965 | return -EPERM; | |
2966 | } | |
2967 | ||
2968 | /* check if device is down already */ | |
2969 | if (unlikely(!is_vxge_card_up(vdev))) { | |
2970 | /* just store new value, will use later on open() */ | |
2971 | dev->mtu = new_mtu; | |
2972 | vxge_debug_init(vdev->level_err, | |
2973 | "%s", "device is down on MTU change"); | |
2974 | return 0; | |
2975 | } | |
2976 | ||
2977 | vxge_debug_init(vdev->level_trace, | |
2978 | "trying to apply new MTU %d", new_mtu); | |
2979 | ||
2980 | if (vxge_close(dev)) | |
2981 | return -EIO; | |
2982 | ||
2983 | dev->mtu = new_mtu; | |
2984 | vdev->mtu = new_mtu; | |
2985 | ||
2986 | if (vxge_open(dev)) | |
2987 | return -EIO; | |
2988 | ||
2989 | vxge_debug_init(vdev->level_trace, | |
2990 | "%s: MTU changed to %d", vdev->ndev->name, new_mtu); | |
2991 | ||
2992 | vxge_debug_entryexit(vdev->level_trace, | |
2993 | "%s:%d Exiting...", __func__, __LINE__); | |
2994 | ||
2995 | return 0; | |
2996 | } | |
2997 | ||
2998 | /** | |
2999 | * vxge_get_stats | |
3000 | * @dev: pointer to the device structure | |
3001 | * | |
3002 | * Updates the device statistics structure. This function updates the device | |
3003 | * statistics structure in the net_device structure and returns a pointer | |
3004 | * to the same. | |
3005 | */ | |
3006 | static struct net_device_stats * | |
3007 | vxge_get_stats(struct net_device *dev) | |
3008 | { | |
3009 | struct vxgedev *vdev; | |
3010 | struct net_device_stats *net_stats; | |
3011 | int k; | |
3012 | ||
3013 | vdev = netdev_priv(dev); | |
3014 | ||
3015 | net_stats = &vdev->stats.net_stats; | |
3016 | ||
3017 | memset(net_stats, 0, sizeof(struct net_device_stats)); | |
3018 | ||
3019 | for (k = 0; k < vdev->no_of_vpath; k++) { | |
3020 | net_stats->rx_packets += vdev->vpaths[k].ring.stats.rx_frms; | |
3021 | net_stats->rx_bytes += vdev->vpaths[k].ring.stats.rx_bytes; | |
3022 | net_stats->rx_errors += vdev->vpaths[k].ring.stats.rx_errors; | |
3023 | net_stats->multicast += vdev->vpaths[k].ring.stats.rx_mcast; | |
3024 | net_stats->rx_dropped += | |
3025 | vdev->vpaths[k].ring.stats.rx_dropped; | |
3026 | ||
3027 | net_stats->tx_packets += vdev->vpaths[k].fifo.stats.tx_frms; | |
3028 | net_stats->tx_bytes += vdev->vpaths[k].fifo.stats.tx_bytes; | |
3029 | net_stats->tx_errors += vdev->vpaths[k].fifo.stats.tx_errors; | |
3030 | } | |
3031 | ||
3032 | return net_stats; | |
3033 | } | |
3034 | ||
3035 | /** | |
3036 | * vxge_ioctl | |
3037 | * @dev: Device pointer. | |
3038 | * @ifr: An IOCTL specific structure, that can contain a pointer to | |
3039 | * a proprietary structure used to pass information to the driver. | |
3040 | * @cmd: This is used to distinguish between the different commands that | |
3041 | * can be passed to the IOCTL functions. | |
3042 | * | |
3043 | * Entry point for the Ioctl. | |
3044 | */ | |
3045 | static int vxge_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) | |
3046 | { | |
3047 | return -EOPNOTSUPP; | |
3048 | } | |
3049 | ||
3050 | /** | |
3051 | * vxge_tx_watchdog | |
3052 | * @dev: pointer to net device structure | |
3053 | * | |
3054 | * Watchdog for transmit side. | |
3055 | * This function is triggered if the Tx Queue is stopped | |
3056 | * for a pre-defined amount of time when the Interface is still up. | |
3057 | */ | |
3058 | static void | |
3059 | vxge_tx_watchdog(struct net_device *dev) | |
3060 | { | |
3061 | struct vxgedev *vdev; | |
3062 | ||
3063 | vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__); | |
3064 | ||
3065 | vdev = (struct vxgedev *)netdev_priv(dev); | |
3066 | ||
3067 | vdev->cric_err_event = VXGE_HW_EVENT_RESET_START; | |
3068 | ||
3069 | vxge_reset(vdev); | |
3070 | vxge_debug_entryexit(VXGE_TRACE, | |
3071 | "%s:%d Exiting...", __func__, __LINE__); | |
3072 | } | |
3073 | ||
3074 | /** | |
3075 | * vxge_vlan_rx_register | |
3076 | * @dev: net device pointer. | |
3077 | * @grp: vlan group | |
3078 | * | |
3079 | * Vlan group registration | |
3080 | */ | |
3081 | static void | |
3082 | vxge_vlan_rx_register(struct net_device *dev, struct vlan_group *grp) | |
3083 | { | |
3084 | struct vxgedev *vdev; | |
3085 | struct vxge_vpath *vpath; | |
3086 | int vp; | |
3087 | u64 vid; | |
3088 | enum vxge_hw_status status; | |
3089 | int i; | |
3090 | ||
3091 | vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__); | |
3092 | ||
3093 | vdev = (struct vxgedev *)netdev_priv(dev); | |
3094 | ||
3095 | vpath = &vdev->vpaths[0]; | |
3096 | if ((NULL == grp) && (vpath->is_open)) { | |
3097 | /* Get the first vlan */ | |
3098 | status = vxge_hw_vpath_vid_get(vpath->handle, &vid); | |
3099 | ||
3100 | while (status == VXGE_HW_OK) { | |
3101 | ||
3102 | /* Delete this vlan from the vid table */ | |
3103 | for (vp = 0; vp < vdev->no_of_vpath; vp++) { | |
3104 | vpath = &vdev->vpaths[vp]; | |
3105 | if (!vpath->is_open) | |
3106 | continue; | |
3107 | ||
3108 | vxge_hw_vpath_vid_delete(vpath->handle, vid); | |
3109 | } | |
3110 | ||
3111 | /* Get the next vlan to be deleted */ | |
3112 | vpath = &vdev->vpaths[0]; | |
3113 | status = vxge_hw_vpath_vid_get(vpath->handle, &vid); | |
3114 | } | |
3115 | } | |
3116 | ||
3117 | vdev->vlgrp = grp; | |
3118 | ||
3119 | for (i = 0; i < vdev->no_of_vpath; i++) { | |
3120 | if (vdev->vpaths[i].is_configured) | |
3121 | vdev->vpaths[i].ring.vlgrp = grp; | |
3122 | } | |
3123 | ||
3124 | vxge_debug_entryexit(VXGE_TRACE, | |
3125 | "%s:%d Exiting...", __func__, __LINE__); | |
3126 | } | |
3127 | ||
3128 | /** | |
3129 | * vxge_vlan_rx_add_vid | |
3130 | * @dev: net device pointer. | |
3131 | * @vid: vid | |
3132 | * | |
3133 | * Add the vlan id to the devices vlan id table | |
3134 | */ | |
3135 | static void | |
3136 | vxge_vlan_rx_add_vid(struct net_device *dev, unsigned short vid) | |
3137 | { | |
3138 | struct vxgedev *vdev; | |
3139 | struct vxge_vpath *vpath; | |
3140 | int vp_id; | |
3141 | ||
3142 | vdev = (struct vxgedev *)netdev_priv(dev); | |
3143 | ||
3144 | /* Add these vlan to the vid table */ | |
3145 | for (vp_id = 0; vp_id < vdev->no_of_vpath; vp_id++) { | |
3146 | vpath = &vdev->vpaths[vp_id]; | |
3147 | if (!vpath->is_open) | |
3148 | continue; | |
3149 | vxge_hw_vpath_vid_add(vpath->handle, vid); | |
3150 | } | |
3151 | } | |
3152 | ||
3153 | /** | |
3154 | * vxge_vlan_rx_add_vid | |
3155 | * @dev: net device pointer. | |
3156 | * @vid: vid | |
3157 | * | |
3158 | * Remove the vlan id from the device's vlan id table | |
3159 | */ | |
3160 | static void | |
3161 | vxge_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) | |
3162 | { | |
3163 | struct vxgedev *vdev; | |
3164 | struct vxge_vpath *vpath; | |
3165 | int vp_id; | |
3166 | ||
3167 | vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__); | |
3168 | ||
3169 | vdev = (struct vxgedev *)netdev_priv(dev); | |
3170 | ||
3171 | vlan_group_set_device(vdev->vlgrp, vid, NULL); | |
3172 | ||
3173 | /* Delete this vlan from the vid table */ | |
3174 | for (vp_id = 0; vp_id < vdev->no_of_vpath; vp_id++) { | |
3175 | vpath = &vdev->vpaths[vp_id]; | |
3176 | if (!vpath->is_open) | |
3177 | continue; | |
3178 | vxge_hw_vpath_vid_delete(vpath->handle, vid); | |
3179 | } | |
3180 | vxge_debug_entryexit(VXGE_TRACE, | |
3181 | "%s:%d Exiting...", __func__, __LINE__); | |
3182 | } | |
3183 | ||
3184 | static const struct net_device_ops vxge_netdev_ops = { | |
3185 | .ndo_open = vxge_open, | |
3186 | .ndo_stop = vxge_close, | |
3187 | .ndo_get_stats = vxge_get_stats, | |
3188 | .ndo_start_xmit = vxge_xmit, | |
3189 | .ndo_validate_addr = eth_validate_addr, | |
3190 | .ndo_set_multicast_list = vxge_set_multicast, | |
3191 | ||
3192 | .ndo_do_ioctl = vxge_ioctl, | |
3193 | ||
3194 | .ndo_set_mac_address = vxge_set_mac_addr, | |
3195 | .ndo_change_mtu = vxge_change_mtu, | |
3196 | .ndo_vlan_rx_register = vxge_vlan_rx_register, | |
3197 | .ndo_vlan_rx_kill_vid = vxge_vlan_rx_kill_vid, | |
3198 | .ndo_vlan_rx_add_vid = vxge_vlan_rx_add_vid, | |
3199 | ||
3200 | .ndo_tx_timeout = vxge_tx_watchdog, | |
3201 | #ifdef CONFIG_NET_POLL_CONTROLLER | |
3202 | .ndo_poll_controller = vxge_netpoll, | |
3203 | #endif | |
3204 | }; | |
3205 | ||
3206 | int __devinit vxge_device_register(struct __vxge_hw_device *hldev, | |
3207 | struct vxge_config *config, | |
3208 | int high_dma, int no_of_vpath, | |
3209 | struct vxgedev **vdev_out) | |
3210 | { | |
3211 | struct net_device *ndev; | |
3212 | enum vxge_hw_status status = VXGE_HW_OK; | |
3213 | struct vxgedev *vdev; | |
3214 | int i, ret = 0, no_of_queue = 1; | |
3215 | u64 stat; | |
3216 | ||
3217 | *vdev_out = NULL; | |
3218 | if (config->tx_steering_type == TX_MULTIQ_STEERING) | |
3219 | no_of_queue = no_of_vpath; | |
3220 | ||
3221 | ndev = alloc_etherdev_mq(sizeof(struct vxgedev), | |
3222 | no_of_queue); | |
3223 | if (ndev == NULL) { | |
3224 | vxge_debug_init( | |
3225 | vxge_hw_device_trace_level_get(hldev), | |
3226 | "%s : device allocation failed", __func__); | |
3227 | ret = -ENODEV; | |
3228 | goto _out0; | |
3229 | } | |
3230 | ||
3231 | vxge_debug_entryexit( | |
3232 | vxge_hw_device_trace_level_get(hldev), | |
3233 | "%s: %s:%d Entering...", | |
3234 | ndev->name, __func__, __LINE__); | |
3235 | ||
3236 | vdev = netdev_priv(ndev); | |
3237 | memset(vdev, 0, sizeof(struct vxgedev)); | |
3238 | ||
3239 | vdev->ndev = ndev; | |
3240 | vdev->devh = hldev; | |
3241 | vdev->pdev = hldev->pdev; | |
3242 | memcpy(&vdev->config, config, sizeof(struct vxge_config)); | |
3243 | vdev->rx_csum = 1; /* Enable Rx CSUM by default. */ | |
3244 | ||
3245 | SET_NETDEV_DEV(ndev, &vdev->pdev->dev); | |
3246 | ||
3247 | ndev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX | | |
3248 | NETIF_F_HW_VLAN_FILTER; | |
3249 | /* Driver entry points */ | |
3250 | ndev->irq = vdev->pdev->irq; | |
3251 | ndev->base_addr = (unsigned long) hldev->bar0; | |
3252 | ||
3253 | ndev->netdev_ops = &vxge_netdev_ops; | |
3254 | ||
3255 | ndev->watchdog_timeo = VXGE_LL_WATCH_DOG_TIMEOUT; | |
3256 | ||
3257 | initialize_ethtool_ops(ndev); | |
3258 | ||
3259 | /* Allocate memory for vpath */ | |
3260 | vdev->vpaths = kzalloc((sizeof(struct vxge_vpath)) * | |
3261 | no_of_vpath, GFP_KERNEL); | |
3262 | if (!vdev->vpaths) { | |
3263 | vxge_debug_init(VXGE_ERR, | |
3264 | "%s: vpath memory allocation failed", | |
3265 | vdev->ndev->name); | |
3266 | ret = -ENODEV; | |
3267 | goto _out1; | |
3268 | } | |
3269 | ||
3270 | ndev->features |= NETIF_F_SG; | |
3271 | ||
3272 | ndev->features |= NETIF_F_HW_CSUM; | |
3273 | vxge_debug_init(vxge_hw_device_trace_level_get(hldev), | |
3274 | "%s : checksuming enabled", __func__); | |
3275 | ||
3276 | if (high_dma) { | |
3277 | ndev->features |= NETIF_F_HIGHDMA; | |
3278 | vxge_debug_init(vxge_hw_device_trace_level_get(hldev), | |
3279 | "%s : using High DMA", __func__); | |
3280 | } | |
3281 | ||
3282 | ndev->features |= NETIF_F_TSO | NETIF_F_TSO6; | |
3283 | ||
3284 | if (vdev->config.gro_enable) | |
3285 | ndev->features |= NETIF_F_GRO; | |
3286 | ||
3287 | if (vdev->config.tx_steering_type == TX_MULTIQ_STEERING) | |
3288 | ndev->real_num_tx_queues = no_of_vpath; | |
3289 | ||
3290 | #ifdef NETIF_F_LLTX | |
3291 | ndev->features |= NETIF_F_LLTX; | |
3292 | #endif | |
3293 | ||
3294 | for (i = 0; i < no_of_vpath; i++) | |
3295 | spin_lock_init(&vdev->vpaths[i].fifo.tx_lock); | |
3296 | ||
3297 | if (register_netdev(ndev)) { | |
3298 | vxge_debug_init(vxge_hw_device_trace_level_get(hldev), | |
3299 | "%s: %s : device registration failed!", | |
3300 | ndev->name, __func__); | |
3301 | ret = -ENODEV; | |
3302 | goto _out2; | |
3303 | } | |
3304 | ||
3305 | /* Set the factory defined MAC address initially */ | |
3306 | ndev->addr_len = ETH_ALEN; | |
3307 | ||
3308 | /* Make Link state as off at this point, when the Link change | |
3309 | * interrupt comes the state will be automatically changed to | |
3310 | * the right state. | |
3311 | */ | |
3312 | netif_carrier_off(ndev); | |
3313 | ||
3314 | vxge_debug_init(vxge_hw_device_trace_level_get(hldev), | |
3315 | "%s: Ethernet device registered", | |
3316 | ndev->name); | |
3317 | ||
3318 | *vdev_out = vdev; | |
3319 | ||
3320 | /* Resetting the Device stats */ | |
3321 | status = vxge_hw_mrpcim_stats_access( | |
3322 | hldev, | |
3323 | VXGE_HW_STATS_OP_CLEAR_ALL_STATS, | |
3324 | 0, | |
3325 | 0, | |
3326 | &stat); | |
3327 | ||
3328 | if (status == VXGE_HW_ERR_PRIVILAGED_OPEARATION) | |
3329 | vxge_debug_init( | |
3330 | vxge_hw_device_trace_level_get(hldev), | |
3331 | "%s: device stats clear returns" | |
3332 | "VXGE_HW_ERR_PRIVILAGED_OPEARATION", ndev->name); | |
3333 | ||
3334 | vxge_debug_entryexit(vxge_hw_device_trace_level_get(hldev), | |
3335 | "%s: %s:%d Exiting...", | |
3336 | ndev->name, __func__, __LINE__); | |
3337 | ||
3338 | return ret; | |
3339 | _out2: | |
3340 | kfree(vdev->vpaths); | |
3341 | _out1: | |
3342 | free_netdev(ndev); | |
3343 | _out0: | |
3344 | return ret; | |
3345 | } | |
3346 | ||
3347 | /* | |
3348 | * vxge_device_unregister | |
3349 | * | |
3350 | * This function will unregister and free network device | |
3351 | */ | |
3352 | void | |
3353 | vxge_device_unregister(struct __vxge_hw_device *hldev) | |
3354 | { | |
3355 | struct vxgedev *vdev; | |
3356 | struct net_device *dev; | |
3357 | char buf[IFNAMSIZ]; | |
3358 | #if ((VXGE_DEBUG_INIT & VXGE_DEBUG_MASK) || \ | |
3359 | (VXGE_DEBUG_ENTRYEXIT & VXGE_DEBUG_MASK)) | |
3360 | u32 level_trace; | |
3361 | #endif | |
3362 | ||
3363 | dev = hldev->ndev; | |
3364 | vdev = netdev_priv(dev); | |
3365 | #if ((VXGE_DEBUG_INIT & VXGE_DEBUG_MASK) || \ | |
3366 | (VXGE_DEBUG_ENTRYEXIT & VXGE_DEBUG_MASK)) | |
3367 | level_trace = vdev->level_trace; | |
3368 | #endif | |
3369 | vxge_debug_entryexit(level_trace, | |
3370 | "%s: %s:%d", vdev->ndev->name, __func__, __LINE__); | |
3371 | ||
3372 | memcpy(buf, vdev->ndev->name, IFNAMSIZ); | |
3373 | ||
3374 | /* in 2.6 will call stop() if device is up */ | |
3375 | unregister_netdev(dev); | |
3376 | ||
3377 | flush_scheduled_work(); | |
3378 | ||
3379 | vxge_debug_init(level_trace, "%s: ethernet device unregistered", buf); | |
3380 | vxge_debug_entryexit(level_trace, | |
3381 | "%s: %s:%d Exiting...", buf, __func__, __LINE__); | |
3382 | } | |
3383 | ||
3384 | /* | |
3385 | * vxge_callback_crit_err | |
3386 | * | |
3387 | * This function is called by the alarm handler in interrupt context. | |
3388 | * Driver must analyze it based on the event type. | |
3389 | */ | |
3390 | static void | |
3391 | vxge_callback_crit_err(struct __vxge_hw_device *hldev, | |
3392 | enum vxge_hw_event type, u64 vp_id) | |
3393 | { | |
3394 | struct net_device *dev = hldev->ndev; | |
3395 | struct vxgedev *vdev = (struct vxgedev *)netdev_priv(dev); | |
3396 | int vpath_idx; | |
3397 | ||
3398 | vxge_debug_entryexit(vdev->level_trace, | |
3399 | "%s: %s:%d", vdev->ndev->name, __func__, __LINE__); | |
3400 | ||
3401 | /* Note: This event type should be used for device wide | |
3402 | * indications only - Serious errors, Slot freeze and critical errors | |
3403 | */ | |
3404 | vdev->cric_err_event = type; | |
3405 | ||
3406 | for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; vpath_idx++) | |
3407 | if (vdev->vpaths[vpath_idx].device_id == vp_id) | |
3408 | break; | |
3409 | ||
3410 | if (!test_bit(__VXGE_STATE_RESET_CARD, &vdev->state)) { | |
3411 | if (type == VXGE_HW_EVENT_SLOT_FREEZE) { | |
3412 | vxge_debug_init(VXGE_ERR, | |
3413 | "%s: Slot is frozen", vdev->ndev->name); | |
3414 | } else if (type == VXGE_HW_EVENT_SERR) { | |
3415 | vxge_debug_init(VXGE_ERR, | |
3416 | "%s: Encountered Serious Error", | |
3417 | vdev->ndev->name); | |
3418 | } else if (type == VXGE_HW_EVENT_CRITICAL_ERR) | |
3419 | vxge_debug_init(VXGE_ERR, | |
3420 | "%s: Encountered Critical Error", | |
3421 | vdev->ndev->name); | |
3422 | } | |
3423 | ||
3424 | if ((type == VXGE_HW_EVENT_SERR) || | |
3425 | (type == VXGE_HW_EVENT_SLOT_FREEZE)) { | |
3426 | if (unlikely(vdev->exec_mode)) | |
3427 | clear_bit(__VXGE_STATE_CARD_UP, &vdev->state); | |
3428 | } else if (type == VXGE_HW_EVENT_CRITICAL_ERR) { | |
3429 | vxge_hw_device_mask_all(hldev); | |
3430 | if (unlikely(vdev->exec_mode)) | |
3431 | clear_bit(__VXGE_STATE_CARD_UP, &vdev->state); | |
3432 | } else if ((type == VXGE_HW_EVENT_FIFO_ERR) || | |
3433 | (type == VXGE_HW_EVENT_VPATH_ERR)) { | |
3434 | ||
3435 | if (unlikely(vdev->exec_mode)) | |
3436 | clear_bit(__VXGE_STATE_CARD_UP, &vdev->state); | |
3437 | else { | |
3438 | /* check if this vpath is already set for reset */ | |
3439 | if (!test_and_set_bit(vpath_idx, &vdev->vp_reset)) { | |
3440 | ||
3441 | /* disable interrupts for this vpath */ | |
3442 | vxge_vpath_intr_disable(vdev, vpath_idx); | |
3443 | ||
3444 | /* stop the queue for this vpath */ | |
3445 | vxge_stop_tx_queue(&vdev->vpaths[vpath_idx]. | |
3446 | fifo); | |
3447 | } | |
3448 | } | |
3449 | } | |
3450 | ||
3451 | vxge_debug_entryexit(vdev->level_trace, | |
3452 | "%s: %s:%d Exiting...", | |
3453 | vdev->ndev->name, __func__, __LINE__); | |
3454 | } | |
3455 | ||
3456 | static void verify_bandwidth(void) | |
3457 | { | |
3458 | int i, band_width, total = 0, equal_priority = 0; | |
3459 | ||
3460 | /* 1. If user enters 0 for some fifo, give equal priority to all */ | |
3461 | for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) { | |
3462 | if (bw_percentage[i] == 0) { | |
3463 | equal_priority = 1; | |
3464 | break; | |
3465 | } | |
3466 | } | |
3467 | ||
3468 | if (!equal_priority) { | |
3469 | /* 2. If sum exceeds 100, give equal priority to all */ | |
3470 | for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) { | |
3471 | if (bw_percentage[i] == 0xFF) | |
3472 | break; | |
3473 | ||
3474 | total += bw_percentage[i]; | |
3475 | if (total > VXGE_HW_VPATH_BANDWIDTH_MAX) { | |
3476 | equal_priority = 1; | |
3477 | break; | |
3478 | } | |
3479 | } | |
3480 | } | |
3481 | ||
3482 | if (!equal_priority) { | |
3483 | /* Is all the bandwidth consumed? */ | |
3484 | if (total < VXGE_HW_VPATH_BANDWIDTH_MAX) { | |
3485 | if (i < VXGE_HW_MAX_VIRTUAL_PATHS) { | |
3486 | /* Split rest of bw equally among next VPs*/ | |
3487 | band_width = | |
3488 | (VXGE_HW_VPATH_BANDWIDTH_MAX - total) / | |
3489 | (VXGE_HW_MAX_VIRTUAL_PATHS - i); | |
3490 | if (band_width < 2) /* min of 2% */ | |
3491 | equal_priority = 1; | |
3492 | else { | |
3493 | for (; i < VXGE_HW_MAX_VIRTUAL_PATHS; | |
3494 | i++) | |
3495 | bw_percentage[i] = | |
3496 | band_width; | |
3497 | } | |
3498 | } | |
3499 | } else if (i < VXGE_HW_MAX_VIRTUAL_PATHS) | |
3500 | equal_priority = 1; | |
3501 | } | |
3502 | ||
3503 | if (equal_priority) { | |
3504 | vxge_debug_init(VXGE_ERR, | |
3505 | "%s: Assigning equal bandwidth to all the vpaths", | |
3506 | VXGE_DRIVER_NAME); | |
3507 | bw_percentage[0] = VXGE_HW_VPATH_BANDWIDTH_MAX / | |
3508 | VXGE_HW_MAX_VIRTUAL_PATHS; | |
3509 | for (i = 1; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) | |
3510 | bw_percentage[i] = bw_percentage[0]; | |
3511 | } | |
703da5a1 RV |
3512 | } |
3513 | ||
3514 | /* | |
3515 | * Vpath configuration | |
3516 | */ | |
3517 | static int __devinit vxge_config_vpaths( | |
3518 | struct vxge_hw_device_config *device_config, | |
3519 | u64 vpath_mask, struct vxge_config *config_param) | |
3520 | { | |
3521 | int i, no_of_vpaths = 0, default_no_vpath = 0, temp; | |
3522 | u32 txdl_size, txdl_per_memblock; | |
3523 | ||
3524 | temp = driver_config->vpath_per_dev; | |
3525 | if ((driver_config->vpath_per_dev == VXGE_USE_DEFAULT) && | |
3526 | (max_config_dev == VXGE_MAX_CONFIG_DEV)) { | |
3527 | /* No more CPU. Return vpath number as zero.*/ | |
3528 | if (driver_config->g_no_cpus == -1) | |
3529 | return 0; | |
3530 | ||
3531 | if (!driver_config->g_no_cpus) | |
3532 | driver_config->g_no_cpus = num_online_cpus(); | |
3533 | ||
3534 | driver_config->vpath_per_dev = driver_config->g_no_cpus >> 1; | |
3535 | if (!driver_config->vpath_per_dev) | |
3536 | driver_config->vpath_per_dev = 1; | |
3537 | ||
3538 | for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) | |
3539 | if (!vxge_bVALn(vpath_mask, i, 1)) | |
3540 | continue; | |
3541 | else | |
3542 | default_no_vpath++; | |
3543 | if (default_no_vpath < driver_config->vpath_per_dev) | |
3544 | driver_config->vpath_per_dev = default_no_vpath; | |
3545 | ||
3546 | driver_config->g_no_cpus = driver_config->g_no_cpus - | |
3547 | (driver_config->vpath_per_dev * 2); | |
3548 | if (driver_config->g_no_cpus <= 0) | |
3549 | driver_config->g_no_cpus = -1; | |
3550 | } | |
3551 | ||
3552 | if (driver_config->vpath_per_dev == 1) { | |
3553 | vxge_debug_ll_config(VXGE_TRACE, | |
3554 | "%s: Disable tx and rx steering, " | |
3555 | "as single vpath is configured", VXGE_DRIVER_NAME); | |
3556 | config_param->rth_steering = NO_STEERING; | |
3557 | config_param->tx_steering_type = NO_STEERING; | |
3558 | device_config->rth_en = 0; | |
3559 | } | |
3560 | ||
3561 | /* configure bandwidth */ | |
3562 | for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) | |
3563 | device_config->vp_config[i].min_bandwidth = bw_percentage[i]; | |
3564 | ||
3565 | for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) { | |
3566 | device_config->vp_config[i].vp_id = i; | |
3567 | device_config->vp_config[i].mtu = VXGE_HW_DEFAULT_MTU; | |
3568 | if (no_of_vpaths < driver_config->vpath_per_dev) { | |
3569 | if (!vxge_bVALn(vpath_mask, i, 1)) { | |
3570 | vxge_debug_ll_config(VXGE_TRACE, | |
3571 | "%s: vpath: %d is not available", | |
3572 | VXGE_DRIVER_NAME, i); | |
3573 | continue; | |
3574 | } else { | |
3575 | vxge_debug_ll_config(VXGE_TRACE, | |
3576 | "%s: vpath: %d available", | |
3577 | VXGE_DRIVER_NAME, i); | |
3578 | no_of_vpaths++; | |
3579 | } | |
3580 | } else { | |
3581 | vxge_debug_ll_config(VXGE_TRACE, | |
3582 | "%s: vpath: %d is not configured, " | |
3583 | "max_config_vpath exceeded", | |
3584 | VXGE_DRIVER_NAME, i); | |
3585 | break; | |
3586 | } | |
3587 | ||
3588 | /* Configure Tx fifo's */ | |
3589 | device_config->vp_config[i].fifo.enable = | |
3590 | VXGE_HW_FIFO_ENABLE; | |
3591 | device_config->vp_config[i].fifo.max_frags = | |
5beefb4f | 3592 | MAX_SKB_FRAGS + 1; |
703da5a1 RV |
3593 | device_config->vp_config[i].fifo.memblock_size = |
3594 | VXGE_HW_MIN_FIFO_MEMBLOCK_SIZE; | |
3595 | ||
5beefb4f SH |
3596 | txdl_size = device_config->vp_config[i].fifo.max_frags * |
3597 | sizeof(struct vxge_hw_fifo_txd); | |
703da5a1 RV |
3598 | txdl_per_memblock = VXGE_HW_MIN_FIFO_MEMBLOCK_SIZE / txdl_size; |
3599 | ||
3600 | device_config->vp_config[i].fifo.fifo_blocks = | |
3601 | ((VXGE_DEF_FIFO_LENGTH - 1) / txdl_per_memblock) + 1; | |
3602 | ||
3603 | device_config->vp_config[i].fifo.intr = | |
3604 | VXGE_HW_FIFO_QUEUE_INTR_DISABLE; | |
3605 | ||
3606 | /* Configure tti properties */ | |
3607 | device_config->vp_config[i].tti.intr_enable = | |
3608 | VXGE_HW_TIM_INTR_ENABLE; | |
3609 | ||
3610 | device_config->vp_config[i].tti.btimer_val = | |
3611 | (VXGE_TTI_BTIMER_VAL * 1000) / 272; | |
3612 | ||
3613 | device_config->vp_config[i].tti.timer_ac_en = | |
3614 | VXGE_HW_TIM_TIMER_AC_ENABLE; | |
3615 | ||
3616 | /* For msi-x with napi (each vector | |
3617 | has a handler of its own) - | |
3618 | Set CI to OFF for all vpaths */ | |
3619 | device_config->vp_config[i].tti.timer_ci_en = | |
3620 | VXGE_HW_TIM_TIMER_CI_DISABLE; | |
3621 | ||
3622 | device_config->vp_config[i].tti.timer_ri_en = | |
3623 | VXGE_HW_TIM_TIMER_RI_DISABLE; | |
3624 | ||
3625 | device_config->vp_config[i].tti.util_sel = | |
3626 | VXGE_HW_TIM_UTIL_SEL_LEGACY_TX_NET_UTIL; | |
3627 | ||
3628 | device_config->vp_config[i].tti.ltimer_val = | |
3629 | (VXGE_TTI_LTIMER_VAL * 1000) / 272; | |
3630 | ||
3631 | device_config->vp_config[i].tti.rtimer_val = | |
3632 | (VXGE_TTI_RTIMER_VAL * 1000) / 272; | |
3633 | ||
3634 | device_config->vp_config[i].tti.urange_a = TTI_TX_URANGE_A; | |
3635 | device_config->vp_config[i].tti.urange_b = TTI_TX_URANGE_B; | |
3636 | device_config->vp_config[i].tti.urange_c = TTI_TX_URANGE_C; | |
3637 | device_config->vp_config[i].tti.uec_a = TTI_TX_UFC_A; | |
3638 | device_config->vp_config[i].tti.uec_b = TTI_TX_UFC_B; | |
3639 | device_config->vp_config[i].tti.uec_c = TTI_TX_UFC_C; | |
3640 | device_config->vp_config[i].tti.uec_d = TTI_TX_UFC_D; | |
3641 | ||
3642 | /* Configure Rx rings */ | |
3643 | device_config->vp_config[i].ring.enable = | |
3644 | VXGE_HW_RING_ENABLE; | |
3645 | ||
3646 | device_config->vp_config[i].ring.ring_blocks = | |
3647 | VXGE_HW_DEF_RING_BLOCKS; | |
3648 | device_config->vp_config[i].ring.buffer_mode = | |
3649 | VXGE_HW_RING_RXD_BUFFER_MODE_1; | |
3650 | device_config->vp_config[i].ring.rxds_limit = | |
3651 | VXGE_HW_DEF_RING_RXDS_LIMIT; | |
3652 | device_config->vp_config[i].ring.scatter_mode = | |
3653 | VXGE_HW_RING_SCATTER_MODE_A; | |
3654 | ||
3655 | /* Configure rti properties */ | |
3656 | device_config->vp_config[i].rti.intr_enable = | |
3657 | VXGE_HW_TIM_INTR_ENABLE; | |
3658 | ||
3659 | device_config->vp_config[i].rti.btimer_val = | |
3660 | (VXGE_RTI_BTIMER_VAL * 1000)/272; | |
3661 | ||
3662 | device_config->vp_config[i].rti.timer_ac_en = | |
3663 | VXGE_HW_TIM_TIMER_AC_ENABLE; | |
3664 | ||
3665 | device_config->vp_config[i].rti.timer_ci_en = | |
3666 | VXGE_HW_TIM_TIMER_CI_DISABLE; | |
3667 | ||
3668 | device_config->vp_config[i].rti.timer_ri_en = | |
3669 | VXGE_HW_TIM_TIMER_RI_DISABLE; | |
3670 | ||
3671 | device_config->vp_config[i].rti.util_sel = | |
3672 | VXGE_HW_TIM_UTIL_SEL_LEGACY_RX_NET_UTIL; | |
3673 | ||
3674 | device_config->vp_config[i].rti.urange_a = | |
3675 | RTI_RX_URANGE_A; | |
3676 | device_config->vp_config[i].rti.urange_b = | |
3677 | RTI_RX_URANGE_B; | |
3678 | device_config->vp_config[i].rti.urange_c = | |
3679 | RTI_RX_URANGE_C; | |
3680 | device_config->vp_config[i].rti.uec_a = RTI_RX_UFC_A; | |
3681 | device_config->vp_config[i].rti.uec_b = RTI_RX_UFC_B; | |
3682 | device_config->vp_config[i].rti.uec_c = RTI_RX_UFC_C; | |
3683 | device_config->vp_config[i].rti.uec_d = RTI_RX_UFC_D; | |
3684 | ||
3685 | device_config->vp_config[i].rti.rtimer_val = | |
3686 | (VXGE_RTI_RTIMER_VAL * 1000) / 272; | |
3687 | ||
3688 | device_config->vp_config[i].rti.ltimer_val = | |
3689 | (VXGE_RTI_LTIMER_VAL * 1000) / 272; | |
3690 | ||
3691 | device_config->vp_config[i].rpa_strip_vlan_tag = | |
3692 | vlan_tag_strip; | |
3693 | } | |
3694 | ||
3695 | driver_config->vpath_per_dev = temp; | |
3696 | return no_of_vpaths; | |
3697 | } | |
3698 | ||
3699 | /* initialize device configuratrions */ | |
3700 | static void __devinit vxge_device_config_init( | |
3701 | struct vxge_hw_device_config *device_config, | |
3702 | int *intr_type) | |
3703 | { | |
3704 | /* Used for CQRQ/SRQ. */ | |
3705 | device_config->dma_blockpool_initial = | |
3706 | VXGE_HW_INITIAL_DMA_BLOCK_POOL_SIZE; | |
3707 | ||
3708 | device_config->dma_blockpool_max = | |
3709 | VXGE_HW_MAX_DMA_BLOCK_POOL_SIZE; | |
3710 | ||
3711 | if (max_mac_vpath > VXGE_MAX_MAC_ADDR_COUNT) | |
3712 | max_mac_vpath = VXGE_MAX_MAC_ADDR_COUNT; | |
3713 | ||
3714 | #ifndef CONFIG_PCI_MSI | |
3715 | vxge_debug_init(VXGE_ERR, | |
3716 | "%s: This Kernel does not support " | |
3717 | "MSI-X. Defaulting to INTA", VXGE_DRIVER_NAME); | |
3718 | *intr_type = INTA; | |
3719 | #endif | |
3720 | ||
3721 | /* Configure whether MSI-X or IRQL. */ | |
3722 | switch (*intr_type) { | |
3723 | case INTA: | |
3724 | device_config->intr_mode = VXGE_HW_INTR_MODE_IRQLINE; | |
3725 | break; | |
3726 | ||
3727 | case MSI_X: | |
3728 | device_config->intr_mode = VXGE_HW_INTR_MODE_MSIX; | |
3729 | break; | |
3730 | } | |
3731 | /* Timer period between device poll */ | |
3732 | device_config->device_poll_millis = VXGE_TIMER_DELAY; | |
3733 | ||
3734 | /* Configure mac based steering. */ | |
3735 | device_config->rts_mac_en = addr_learn_en; | |
3736 | ||
3737 | /* Configure Vpaths */ | |
3738 | device_config->rth_it_type = VXGE_HW_RTH_IT_TYPE_MULTI_IT; | |
3739 | ||
3740 | vxge_debug_ll_config(VXGE_TRACE, "%s : Device Config Params ", | |
3741 | __func__); | |
3742 | vxge_debug_ll_config(VXGE_TRACE, "dma_blockpool_initial : %d", | |
3743 | device_config->dma_blockpool_initial); | |
3744 | vxge_debug_ll_config(VXGE_TRACE, "dma_blockpool_max : %d", | |
3745 | device_config->dma_blockpool_max); | |
3746 | vxge_debug_ll_config(VXGE_TRACE, "intr_mode : %d", | |
3747 | device_config->intr_mode); | |
3748 | vxge_debug_ll_config(VXGE_TRACE, "device_poll_millis : %d", | |
3749 | device_config->device_poll_millis); | |
3750 | vxge_debug_ll_config(VXGE_TRACE, "rts_mac_en : %d", | |
3751 | device_config->rts_mac_en); | |
3752 | vxge_debug_ll_config(VXGE_TRACE, "rth_en : %d", | |
3753 | device_config->rth_en); | |
3754 | vxge_debug_ll_config(VXGE_TRACE, "rth_it_type : %d", | |
3755 | device_config->rth_it_type); | |
3756 | } | |
3757 | ||
3758 | static void __devinit vxge_print_parm(struct vxgedev *vdev, u64 vpath_mask) | |
3759 | { | |
3760 | int i; | |
3761 | ||
3762 | vxge_debug_init(VXGE_TRACE, | |
3763 | "%s: %d Vpath(s) opened", | |
3764 | vdev->ndev->name, vdev->no_of_vpath); | |
3765 | ||
3766 | switch (vdev->config.intr_type) { | |
3767 | case INTA: | |
3768 | vxge_debug_init(VXGE_TRACE, | |
3769 | "%s: Interrupt type INTA", vdev->ndev->name); | |
3770 | break; | |
3771 | ||
3772 | case MSI_X: | |
3773 | vxge_debug_init(VXGE_TRACE, | |
3774 | "%s: Interrupt type MSI-X", vdev->ndev->name); | |
3775 | break; | |
3776 | } | |
3777 | ||
3778 | if (vdev->config.rth_steering) { | |
3779 | vxge_debug_init(VXGE_TRACE, | |
3780 | "%s: RTH steering enabled for TCP_IPV4", | |
3781 | vdev->ndev->name); | |
3782 | } else { | |
3783 | vxge_debug_init(VXGE_TRACE, | |
3784 | "%s: RTH steering disabled", vdev->ndev->name); | |
3785 | } | |
3786 | ||
3787 | switch (vdev->config.tx_steering_type) { | |
3788 | case NO_STEERING: | |
3789 | vxge_debug_init(VXGE_TRACE, | |
3790 | "%s: Tx steering disabled", vdev->ndev->name); | |
3791 | break; | |
3792 | case TX_PRIORITY_STEERING: | |
3793 | vxge_debug_init(VXGE_TRACE, | |
3794 | "%s: Unsupported tx steering option", | |
3795 | vdev->ndev->name); | |
3796 | vxge_debug_init(VXGE_TRACE, | |
3797 | "%s: Tx steering disabled", vdev->ndev->name); | |
3798 | vdev->config.tx_steering_type = 0; | |
3799 | break; | |
3800 | case TX_VLAN_STEERING: | |
3801 | vxge_debug_init(VXGE_TRACE, | |
3802 | "%s: Unsupported tx steering option", | |
3803 | vdev->ndev->name); | |
3804 | vxge_debug_init(VXGE_TRACE, | |
3805 | "%s: Tx steering disabled", vdev->ndev->name); | |
3806 | vdev->config.tx_steering_type = 0; | |
3807 | break; | |
3808 | case TX_MULTIQ_STEERING: | |
3809 | vxge_debug_init(VXGE_TRACE, | |
3810 | "%s: Tx multiqueue steering enabled", | |
3811 | vdev->ndev->name); | |
3812 | break; | |
3813 | case TX_PORT_STEERING: | |
3814 | vxge_debug_init(VXGE_TRACE, | |
3815 | "%s: Tx port steering enabled", | |
3816 | vdev->ndev->name); | |
3817 | break; | |
3818 | default: | |
3819 | vxge_debug_init(VXGE_ERR, | |
3820 | "%s: Unsupported tx steering type", | |
3821 | vdev->ndev->name); | |
3822 | vxge_debug_init(VXGE_TRACE, | |
3823 | "%s: Tx steering disabled", vdev->ndev->name); | |
3824 | vdev->config.tx_steering_type = 0; | |
3825 | } | |
3826 | ||
3827 | if (vdev->config.gro_enable) { | |
3828 | vxge_debug_init(VXGE_ERR, | |
3829 | "%s: Generic receive offload enabled", | |
3830 | vdev->ndev->name); | |
3831 | } else | |
3832 | vxge_debug_init(VXGE_TRACE, | |
3833 | "%s: Generic receive offload disabled", | |
3834 | vdev->ndev->name); | |
3835 | ||
3836 | if (vdev->config.addr_learn_en) | |
3837 | vxge_debug_init(VXGE_TRACE, | |
3838 | "%s: MAC Address learning enabled", vdev->ndev->name); | |
3839 | ||
3840 | vxge_debug_init(VXGE_TRACE, | |
3841 | "%s: Rx doorbell mode enabled", vdev->ndev->name); | |
3842 | ||
3843 | for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) { | |
3844 | if (!vxge_bVALn(vpath_mask, i, 1)) | |
3845 | continue; | |
3846 | vxge_debug_ll_config(VXGE_TRACE, | |
3847 | "%s: MTU size - %d", vdev->ndev->name, | |
3848 | ((struct __vxge_hw_device *)(vdev->devh))-> | |
3849 | config.vp_config[i].mtu); | |
3850 | vxge_debug_init(VXGE_TRACE, | |
3851 | "%s: VLAN tag stripping %s", vdev->ndev->name, | |
3852 | ((struct __vxge_hw_device *)(vdev->devh))-> | |
3853 | config.vp_config[i].rpa_strip_vlan_tag | |
3854 | ? "Enabled" : "Disabled"); | |
3855 | vxge_debug_init(VXGE_TRACE, | |
3856 | "%s: Ring blocks : %d", vdev->ndev->name, | |
3857 | ((struct __vxge_hw_device *)(vdev->devh))-> | |
3858 | config.vp_config[i].ring.ring_blocks); | |
3859 | vxge_debug_init(VXGE_TRACE, | |
3860 | "%s: Fifo blocks : %d", vdev->ndev->name, | |
3861 | ((struct __vxge_hw_device *)(vdev->devh))-> | |
3862 | config.vp_config[i].fifo.fifo_blocks); | |
3863 | vxge_debug_ll_config(VXGE_TRACE, | |
3864 | "%s: Max frags : %d", vdev->ndev->name, | |
3865 | ((struct __vxge_hw_device *)(vdev->devh))-> | |
3866 | config.vp_config[i].fifo.max_frags); | |
3867 | break; | |
3868 | } | |
3869 | } | |
3870 | ||
3871 | #ifdef CONFIG_PM | |
3872 | /** | |
3873 | * vxge_pm_suspend - vxge power management suspend entry point | |
3874 | * | |
3875 | */ | |
3876 | static int vxge_pm_suspend(struct pci_dev *pdev, pm_message_t state) | |
3877 | { | |
3878 | return -ENOSYS; | |
3879 | } | |
3880 | /** | |
3881 | * vxge_pm_resume - vxge power management resume entry point | |
3882 | * | |
3883 | */ | |
3884 | static int vxge_pm_resume(struct pci_dev *pdev) | |
3885 | { | |
3886 | return -ENOSYS; | |
3887 | } | |
3888 | ||
3889 | #endif | |
3890 | ||
3891 | /** | |
3892 | * vxge_io_error_detected - called when PCI error is detected | |
3893 | * @pdev: Pointer to PCI device | |
3894 | * @state: The current pci connection state | |
3895 | * | |
3896 | * This function is called after a PCI bus error affecting | |
3897 | * this device has been detected. | |
3898 | */ | |
3899 | static pci_ers_result_t vxge_io_error_detected(struct pci_dev *pdev, | |
3900 | pci_channel_state_t state) | |
3901 | { | |
3902 | struct __vxge_hw_device *hldev = | |
3903 | (struct __vxge_hw_device *) pci_get_drvdata(pdev); | |
3904 | struct net_device *netdev = hldev->ndev; | |
3905 | ||
3906 | netif_device_detach(netdev); | |
3907 | ||
e33b992d DN |
3908 | if (state == pci_channel_io_perm_failure) |
3909 | return PCI_ERS_RESULT_DISCONNECT; | |
3910 | ||
703da5a1 RV |
3911 | if (netif_running(netdev)) { |
3912 | /* Bring down the card, while avoiding PCI I/O */ | |
3913 | do_vxge_close(netdev, 0); | |
3914 | } | |
3915 | ||
3916 | pci_disable_device(pdev); | |
3917 | ||
3918 | return PCI_ERS_RESULT_NEED_RESET; | |
3919 | } | |
3920 | ||
3921 | /** | |
3922 | * vxge_io_slot_reset - called after the pci bus has been reset. | |
3923 | * @pdev: Pointer to PCI device | |
3924 | * | |
3925 | * Restart the card from scratch, as if from a cold-boot. | |
3926 | * At this point, the card has exprienced a hard reset, | |
3927 | * followed by fixups by BIOS, and has its config space | |
3928 | * set up identically to what it was at cold boot. | |
3929 | */ | |
3930 | static pci_ers_result_t vxge_io_slot_reset(struct pci_dev *pdev) | |
3931 | { | |
3932 | struct __vxge_hw_device *hldev = | |
3933 | (struct __vxge_hw_device *) pci_get_drvdata(pdev); | |
3934 | struct net_device *netdev = hldev->ndev; | |
3935 | ||
3936 | struct vxgedev *vdev = netdev_priv(netdev); | |
3937 | ||
3938 | if (pci_enable_device(pdev)) { | |
3939 | printk(KERN_ERR "%s: " | |
3940 | "Cannot re-enable device after reset\n", | |
3941 | VXGE_DRIVER_NAME); | |
3942 | return PCI_ERS_RESULT_DISCONNECT; | |
3943 | } | |
3944 | ||
3945 | pci_set_master(pdev); | |
3946 | vxge_reset(vdev); | |
3947 | ||
3948 | return PCI_ERS_RESULT_RECOVERED; | |
3949 | } | |
3950 | ||
3951 | /** | |
3952 | * vxge_io_resume - called when traffic can start flowing again. | |
3953 | * @pdev: Pointer to PCI device | |
3954 | * | |
3955 | * This callback is called when the error recovery driver tells | |
3956 | * us that its OK to resume normal operation. | |
3957 | */ | |
3958 | static void vxge_io_resume(struct pci_dev *pdev) | |
3959 | { | |
3960 | struct __vxge_hw_device *hldev = | |
3961 | (struct __vxge_hw_device *) pci_get_drvdata(pdev); | |
3962 | struct net_device *netdev = hldev->ndev; | |
3963 | ||
3964 | if (netif_running(netdev)) { | |
3965 | if (vxge_open(netdev)) { | |
3966 | printk(KERN_ERR "%s: " | |
3967 | "Can't bring device back up after reset\n", | |
3968 | VXGE_DRIVER_NAME); | |
3969 | return; | |
3970 | } | |
3971 | } | |
3972 | ||
3973 | netif_device_attach(netdev); | |
3974 | } | |
3975 | ||
cb27ec60 SH |
3976 | static inline u32 vxge_get_num_vfs(u64 function_mode) |
3977 | { | |
3978 | u32 num_functions = 0; | |
3979 | ||
3980 | switch (function_mode) { | |
3981 | case VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION: | |
3982 | case VXGE_HW_FUNCTION_MODE_SRIOV_8: | |
3983 | num_functions = 8; | |
3984 | break; | |
3985 | case VXGE_HW_FUNCTION_MODE_SINGLE_FUNCTION: | |
3986 | num_functions = 1; | |
3987 | break; | |
3988 | case VXGE_HW_FUNCTION_MODE_SRIOV: | |
3989 | case VXGE_HW_FUNCTION_MODE_MRIOV: | |
3990 | case VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION_17: | |
3991 | num_functions = 17; | |
3992 | break; | |
3993 | case VXGE_HW_FUNCTION_MODE_SRIOV_4: | |
3994 | num_functions = 4; | |
3995 | break; | |
3996 | case VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION_2: | |
3997 | num_functions = 2; | |
3998 | break; | |
3999 | case VXGE_HW_FUNCTION_MODE_MRIOV_8: | |
4000 | num_functions = 8; /* TODO */ | |
4001 | break; | |
4002 | } | |
4003 | return num_functions; | |
4004 | } | |
4005 | ||
703da5a1 RV |
4006 | /** |
4007 | * vxge_probe | |
4008 | * @pdev : structure containing the PCI related information of the device. | |
4009 | * @pre: List of PCI devices supported by the driver listed in vxge_id_table. | |
4010 | * Description: | |
4011 | * This function is called when a new PCI device gets detected and initializes | |
4012 | * it. | |
4013 | * Return value: | |
4014 | * returns 0 on success and negative on failure. | |
4015 | * | |
4016 | */ | |
4017 | static int __devinit | |
4018 | vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre) | |
4019 | { | |
4020 | struct __vxge_hw_device *hldev; | |
4021 | enum vxge_hw_status status; | |
4022 | int ret; | |
4023 | int high_dma = 0; | |
4024 | u64 vpath_mask = 0; | |
4025 | struct vxgedev *vdev; | |
4026 | struct vxge_config ll_config; | |
4027 | struct vxge_hw_device_config *device_config = NULL; | |
4028 | struct vxge_hw_device_attr attr; | |
4029 | int i, j, no_of_vpath = 0, max_vpath_supported = 0; | |
4030 | u8 *macaddr; | |
4031 | struct vxge_mac_addrs *entry; | |
4032 | static int bus = -1, device = -1; | |
cb27ec60 | 4033 | u32 host_type; |
703da5a1 | 4034 | u8 new_device = 0; |
cb27ec60 SH |
4035 | enum vxge_hw_status is_privileged; |
4036 | u32 function_mode; | |
4037 | u32 num_vfs = 0; | |
703da5a1 RV |
4038 | |
4039 | vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__); | |
4040 | attr.pdev = pdev; | |
4041 | ||
cb27ec60 SH |
4042 | /* In SRIOV-17 mode, functions of the same adapter |
4043 | * can be deployed on different buses */ | |
4044 | if ((!pdev->is_virtfn) && ((bus != pdev->bus->number) || | |
4045 | (device != PCI_SLOT(pdev->devfn)))) | |
703da5a1 RV |
4046 | new_device = 1; |
4047 | ||
4048 | bus = pdev->bus->number; | |
4049 | device = PCI_SLOT(pdev->devfn); | |
4050 | ||
4051 | if (new_device) { | |
4052 | if (driver_config->config_dev_cnt && | |
4053 | (driver_config->config_dev_cnt != | |
4054 | driver_config->total_dev_cnt)) | |
4055 | vxge_debug_init(VXGE_ERR, | |
4056 | "%s: Configured %d of %d devices", | |
4057 | VXGE_DRIVER_NAME, | |
4058 | driver_config->config_dev_cnt, | |
4059 | driver_config->total_dev_cnt); | |
4060 | driver_config->config_dev_cnt = 0; | |
4061 | driver_config->total_dev_cnt = 0; | |
703da5a1 | 4062 | } |
9002397e SH |
4063 | /* Now making the CPU based no of vpath calculation |
4064 | * applicable for individual functions as well. | |
4065 | */ | |
4066 | driver_config->g_no_cpus = 0; | |
657205bd SH |
4067 | driver_config->vpath_per_dev = max_config_vpath; |
4068 | ||
703da5a1 RV |
4069 | driver_config->total_dev_cnt++; |
4070 | if (++driver_config->config_dev_cnt > max_config_dev) { | |
4071 | ret = 0; | |
4072 | goto _exit0; | |
4073 | } | |
4074 | ||
4075 | device_config = kzalloc(sizeof(struct vxge_hw_device_config), | |
4076 | GFP_KERNEL); | |
4077 | if (!device_config) { | |
4078 | ret = -ENOMEM; | |
4079 | vxge_debug_init(VXGE_ERR, | |
4080 | "device_config : malloc failed %s %d", | |
4081 | __FILE__, __LINE__); | |
4082 | goto _exit0; | |
4083 | } | |
4084 | ||
4085 | memset(&ll_config, 0, sizeof(struct vxge_config)); | |
4086 | ll_config.tx_steering_type = TX_MULTIQ_STEERING; | |
4087 | ll_config.intr_type = MSI_X; | |
4088 | ll_config.napi_weight = NEW_NAPI_WEIGHT; | |
4089 | ll_config.rth_steering = RTH_STEERING; | |
4090 | ||
4091 | /* get the default configuration parameters */ | |
4092 | vxge_hw_device_config_default_get(device_config); | |
4093 | ||
4094 | /* initialize configuration parameters */ | |
4095 | vxge_device_config_init(device_config, &ll_config.intr_type); | |
4096 | ||
4097 | ret = pci_enable_device(pdev); | |
4098 | if (ret) { | |
4099 | vxge_debug_init(VXGE_ERR, | |
4100 | "%s : can not enable PCI device", __func__); | |
4101 | goto _exit0; | |
4102 | } | |
4103 | ||
b3837cec | 4104 | if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) { |
703da5a1 RV |
4105 | vxge_debug_ll_config(VXGE_TRACE, |
4106 | "%s : using 64bit DMA", __func__); | |
4107 | ||
4108 | high_dma = 1; | |
4109 | ||
4110 | if (pci_set_consistent_dma_mask(pdev, | |
b3837cec | 4111 | DMA_BIT_MASK(64))) { |
703da5a1 RV |
4112 | vxge_debug_init(VXGE_ERR, |
4113 | "%s : unable to obtain 64bit DMA for " | |
4114 | "consistent allocations", __func__); | |
4115 | ret = -ENOMEM; | |
4116 | goto _exit1; | |
4117 | } | |
b3837cec | 4118 | } else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) { |
703da5a1 RV |
4119 | vxge_debug_ll_config(VXGE_TRACE, |
4120 | "%s : using 32bit DMA", __func__); | |
4121 | } else { | |
4122 | ret = -ENOMEM; | |
4123 | goto _exit1; | |
4124 | } | |
4125 | ||
4126 | if (pci_request_regions(pdev, VXGE_DRIVER_NAME)) { | |
4127 | vxge_debug_init(VXGE_ERR, | |
4128 | "%s : request regions failed", __func__); | |
4129 | ret = -ENODEV; | |
4130 | goto _exit1; | |
4131 | } | |
4132 | ||
4133 | pci_set_master(pdev); | |
4134 | ||
4135 | attr.bar0 = pci_ioremap_bar(pdev, 0); | |
4136 | if (!attr.bar0) { | |
4137 | vxge_debug_init(VXGE_ERR, | |
4138 | "%s : cannot remap io memory bar0", __func__); | |
4139 | ret = -ENODEV; | |
4140 | goto _exit2; | |
4141 | } | |
4142 | vxge_debug_ll_config(VXGE_TRACE, | |
4143 | "pci ioremap bar0: %p:0x%llx", | |
4144 | attr.bar0, | |
4145 | (unsigned long long)pci_resource_start(pdev, 0)); | |
4146 | ||
703da5a1 RV |
4147 | status = vxge_hw_device_hw_info_get(attr.bar0, |
4148 | &ll_config.device_hw_info); | |
4149 | if (status != VXGE_HW_OK) { | |
4150 | vxge_debug_init(VXGE_ERR, | |
4151 | "%s: Reading of hardware info failed." | |
4152 | "Please try upgrading the firmware.", VXGE_DRIVER_NAME); | |
4153 | ret = -EINVAL; | |
7975d1ee | 4154 | goto _exit3; |
703da5a1 RV |
4155 | } |
4156 | ||
4157 | if (ll_config.device_hw_info.fw_version.major != | |
22fa125e | 4158 | VXGE_DRIVER_FW_VERSION_MAJOR) { |
703da5a1 | 4159 | vxge_debug_init(VXGE_ERR, |
22fa125e SH |
4160 | "%s: Incorrect firmware version." |
4161 | "Please upgrade the firmware to version 1.x.x", | |
4162 | VXGE_DRIVER_NAME); | |
703da5a1 | 4163 | ret = -EINVAL; |
7975d1ee | 4164 | goto _exit3; |
703da5a1 RV |
4165 | } |
4166 | ||
4167 | vpath_mask = ll_config.device_hw_info.vpath_mask; | |
4168 | if (vpath_mask == 0) { | |
4169 | vxge_debug_ll_config(VXGE_TRACE, | |
4170 | "%s: No vpaths available in device", VXGE_DRIVER_NAME); | |
4171 | ret = -EINVAL; | |
7975d1ee | 4172 | goto _exit3; |
703da5a1 RV |
4173 | } |
4174 | ||
4175 | vxge_debug_ll_config(VXGE_TRACE, | |
4176 | "%s:%d Vpath mask = %llx", __func__, __LINE__, | |
4177 | (unsigned long long)vpath_mask); | |
4178 | ||
cb27ec60 SH |
4179 | function_mode = ll_config.device_hw_info.function_mode; |
4180 | host_type = ll_config.device_hw_info.host_type; | |
4181 | is_privileged = __vxge_hw_device_is_privilaged(host_type, | |
4182 | ll_config.device_hw_info.func_id); | |
4183 | ||
703da5a1 RV |
4184 | /* Check how many vpaths are available */ |
4185 | for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) { | |
4186 | if (!((vpath_mask) & vxge_mBIT(i))) | |
4187 | continue; | |
4188 | max_vpath_supported++; | |
4189 | } | |
4190 | ||
cb27ec60 SH |
4191 | if (new_device) |
4192 | num_vfs = vxge_get_num_vfs(function_mode) - 1; | |
4193 | ||
5dbc9011 | 4194 | /* Enable SRIOV mode, if firmware has SRIOV support and if it is a PF */ |
cb27ec60 SH |
4195 | if (is_sriov(function_mode) && (max_config_dev > 1) && |
4196 | (ll_config.intr_type != INTA) && | |
4197 | (is_privileged == VXGE_HW_OK)) { | |
4198 | ret = pci_enable_sriov(pdev, ((max_config_dev - 1) < num_vfs) | |
4199 | ? (max_config_dev - 1) : num_vfs); | |
4200 | if (ret) | |
4201 | vxge_debug_ll_config(VXGE_ERR, | |
4202 | "Failed in enabling SRIOV mode: %d\n", ret); | |
5dbc9011 SS |
4203 | } |
4204 | ||
703da5a1 RV |
4205 | /* |
4206 | * Configure vpaths and get driver configured number of vpaths | |
4207 | * which is less than or equal to the maximum vpaths per function. | |
4208 | */ | |
4209 | no_of_vpath = vxge_config_vpaths(device_config, vpath_mask, &ll_config); | |
4210 | if (!no_of_vpath) { | |
4211 | vxge_debug_ll_config(VXGE_ERR, | |
4212 | "%s: No more vpaths to configure", VXGE_DRIVER_NAME); | |
4213 | ret = 0; | |
7975d1ee | 4214 | goto _exit3; |
703da5a1 RV |
4215 | } |
4216 | ||
4217 | /* Setting driver callbacks */ | |
4218 | attr.uld_callbacks.link_up = vxge_callback_link_up; | |
4219 | attr.uld_callbacks.link_down = vxge_callback_link_down; | |
4220 | attr.uld_callbacks.crit_err = vxge_callback_crit_err; | |
4221 | ||
4222 | status = vxge_hw_device_initialize(&hldev, &attr, device_config); | |
4223 | if (status != VXGE_HW_OK) { | |
4224 | vxge_debug_init(VXGE_ERR, | |
4225 | "Failed to initialize device (%d)", status); | |
4226 | ret = -EINVAL; | |
7975d1ee | 4227 | goto _exit3; |
703da5a1 RV |
4228 | } |
4229 | ||
fa41fd10 SH |
4230 | /* if FCS stripping is not disabled in MAC fail driver load */ |
4231 | if (vxge_hw_vpath_strip_fcs_check(hldev, vpath_mask) != VXGE_HW_OK) { | |
4232 | vxge_debug_init(VXGE_ERR, | |
4233 | "%s: FCS stripping is not disabled in MAC" | |
4234 | " failing driver load", VXGE_DRIVER_NAME); | |
4235 | ret = -EINVAL; | |
4236 | goto _exit4; | |
4237 | } | |
4238 | ||
703da5a1 RV |
4239 | vxge_hw_device_debug_set(hldev, VXGE_ERR, VXGE_COMPONENT_LL); |
4240 | ||
4241 | /* set private device info */ | |
4242 | pci_set_drvdata(pdev, hldev); | |
4243 | ||
4244 | ll_config.gro_enable = VXGE_GRO_ALWAYS_AGGREGATE; | |
4245 | ll_config.fifo_indicate_max_pkts = VXGE_FIFO_INDICATE_MAX_PKTS; | |
4246 | ll_config.addr_learn_en = addr_learn_en; | |
4247 | ll_config.rth_algorithm = RTH_ALG_JENKINS; | |
4248 | ll_config.rth_hash_type_tcpipv4 = VXGE_HW_RING_HASH_TYPE_TCP_IPV4; | |
4249 | ll_config.rth_hash_type_ipv4 = VXGE_HW_RING_HASH_TYPE_NONE; | |
4250 | ll_config.rth_hash_type_tcpipv6 = VXGE_HW_RING_HASH_TYPE_NONE; | |
4251 | ll_config.rth_hash_type_ipv6 = VXGE_HW_RING_HASH_TYPE_NONE; | |
4252 | ll_config.rth_hash_type_tcpipv6ex = VXGE_HW_RING_HASH_TYPE_NONE; | |
4253 | ll_config.rth_hash_type_ipv6ex = VXGE_HW_RING_HASH_TYPE_NONE; | |
4254 | ll_config.rth_bkt_sz = RTH_BUCKET_SIZE; | |
4255 | ll_config.tx_pause_enable = VXGE_PAUSE_CTRL_ENABLE; | |
4256 | ll_config.rx_pause_enable = VXGE_PAUSE_CTRL_ENABLE; | |
4257 | ||
4258 | if (vxge_device_register(hldev, &ll_config, high_dma, no_of_vpath, | |
4259 | &vdev)) { | |
4260 | ret = -EINVAL; | |
7975d1ee | 4261 | goto _exit4; |
703da5a1 RV |
4262 | } |
4263 | ||
4264 | vxge_hw_device_debug_set(hldev, VXGE_TRACE, VXGE_COMPONENT_LL); | |
4265 | VXGE_COPY_DEBUG_INFO_TO_LL(vdev, vxge_hw_device_error_level_get(hldev), | |
4266 | vxge_hw_device_trace_level_get(hldev)); | |
4267 | ||
4268 | /* set private HW device info */ | |
4269 | hldev->ndev = vdev->ndev; | |
4270 | vdev->mtu = VXGE_HW_DEFAULT_MTU; | |
4271 | vdev->bar0 = attr.bar0; | |
703da5a1 RV |
4272 | vdev->max_vpath_supported = max_vpath_supported; |
4273 | vdev->no_of_vpath = no_of_vpath; | |
4274 | ||
4275 | /* Virtual Path count */ | |
4276 | for (i = 0, j = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) { | |
4277 | if (!vxge_bVALn(vpath_mask, i, 1)) | |
4278 | continue; | |
4279 | if (j >= vdev->no_of_vpath) | |
4280 | break; | |
4281 | ||
4282 | vdev->vpaths[j].is_configured = 1; | |
4283 | vdev->vpaths[j].device_id = i; | |
4284 | vdev->vpaths[j].fifo.driver_id = j; | |
4285 | vdev->vpaths[j].ring.driver_id = j; | |
4286 | vdev->vpaths[j].vdev = vdev; | |
4287 | vdev->vpaths[j].max_mac_addr_cnt = max_mac_vpath; | |
4288 | memcpy((u8 *)vdev->vpaths[j].macaddr, | |
4289 | (u8 *)ll_config.device_hw_info.mac_addrs[i], | |
4290 | ETH_ALEN); | |
4291 | ||
4292 | /* Initialize the mac address list header */ | |
4293 | INIT_LIST_HEAD(&vdev->vpaths[j].mac_addr_list); | |
4294 | ||
4295 | vdev->vpaths[j].mac_addr_cnt = 0; | |
4296 | vdev->vpaths[j].mcast_addr_cnt = 0; | |
4297 | j++; | |
4298 | } | |
4299 | vdev->exec_mode = VXGE_EXEC_MODE_DISABLE; | |
4300 | vdev->max_config_port = max_config_port; | |
4301 | ||
4302 | vdev->vlan_tag_strip = vlan_tag_strip; | |
4303 | ||
4304 | /* map the hashing selector table to the configured vpaths */ | |
4305 | for (i = 0; i < vdev->no_of_vpath; i++) | |
4306 | vdev->vpath_selector[i] = vpath_selector[i]; | |
4307 | ||
4308 | macaddr = (u8 *)vdev->vpaths[0].macaddr; | |
4309 | ||
4310 | ll_config.device_hw_info.serial_number[VXGE_HW_INFO_LEN - 1] = '\0'; | |
4311 | ll_config.device_hw_info.product_desc[VXGE_HW_INFO_LEN - 1] = '\0'; | |
4312 | ll_config.device_hw_info.part_number[VXGE_HW_INFO_LEN - 1] = '\0'; | |
4313 | ||
4314 | vxge_debug_init(VXGE_TRACE, "%s: SERIAL NUMBER: %s", | |
4315 | vdev->ndev->name, ll_config.device_hw_info.serial_number); | |
4316 | ||
4317 | vxge_debug_init(VXGE_TRACE, "%s: PART NUMBER: %s", | |
4318 | vdev->ndev->name, ll_config.device_hw_info.part_number); | |
4319 | ||
4320 | vxge_debug_init(VXGE_TRACE, "%s: Neterion %s Server Adapter", | |
4321 | vdev->ndev->name, ll_config.device_hw_info.product_desc); | |
4322 | ||
bf54e736 | 4323 | vxge_debug_init(VXGE_TRACE, "%s: MAC ADDR: %pM", |
4324 | vdev->ndev->name, macaddr); | |
703da5a1 RV |
4325 | |
4326 | vxge_debug_init(VXGE_TRACE, "%s: Link Width x%d", | |
4327 | vdev->ndev->name, vxge_hw_device_link_width_get(hldev)); | |
4328 | ||
4329 | vxge_debug_init(VXGE_TRACE, | |
4330 | "%s: Firmware version : %s Date : %s", vdev->ndev->name, | |
4331 | ll_config.device_hw_info.fw_version.version, | |
4332 | ll_config.device_hw_info.fw_date.date); | |
4333 | ||
0a25bdc6 SH |
4334 | if (new_device) { |
4335 | switch (ll_config.device_hw_info.function_mode) { | |
4336 | case VXGE_HW_FUNCTION_MODE_SINGLE_FUNCTION: | |
4337 | vxge_debug_init(VXGE_TRACE, | |
4338 | "%s: Single Function Mode Enabled", vdev->ndev->name); | |
4339 | break; | |
4340 | case VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION: | |
4341 | vxge_debug_init(VXGE_TRACE, | |
4342 | "%s: Multi Function Mode Enabled", vdev->ndev->name); | |
4343 | break; | |
4344 | case VXGE_HW_FUNCTION_MODE_SRIOV: | |
4345 | vxge_debug_init(VXGE_TRACE, | |
4346 | "%s: Single Root IOV Mode Enabled", vdev->ndev->name); | |
4347 | break; | |
4348 | case VXGE_HW_FUNCTION_MODE_MRIOV: | |
4349 | vxge_debug_init(VXGE_TRACE, | |
4350 | "%s: Multi Root IOV Mode Enabled", vdev->ndev->name); | |
4351 | break; | |
4352 | } | |
4353 | } | |
4354 | ||
703da5a1 RV |
4355 | vxge_print_parm(vdev, vpath_mask); |
4356 | ||
4357 | /* Store the fw version for ethttool option */ | |
4358 | strcpy(vdev->fw_version, ll_config.device_hw_info.fw_version.version); | |
4359 | memcpy(vdev->ndev->dev_addr, (u8 *)vdev->vpaths[0].macaddr, ETH_ALEN); | |
4360 | memcpy(vdev->ndev->perm_addr, vdev->ndev->dev_addr, ETH_ALEN); | |
4361 | ||
4362 | /* Copy the station mac address to the list */ | |
4363 | for (i = 0; i < vdev->no_of_vpath; i++) { | |
4364 | entry = (struct vxge_mac_addrs *) | |
4365 | kzalloc(sizeof(struct vxge_mac_addrs), | |
4366 | GFP_KERNEL); | |
4367 | if (NULL == entry) { | |
4368 | vxge_debug_init(VXGE_ERR, | |
4369 | "%s: mac_addr_list : memory allocation failed", | |
4370 | vdev->ndev->name); | |
4371 | ret = -EPERM; | |
7975d1ee | 4372 | goto _exit5; |
703da5a1 RV |
4373 | } |
4374 | macaddr = (u8 *)&entry->macaddr; | |
4375 | memcpy(macaddr, vdev->ndev->dev_addr, ETH_ALEN); | |
4376 | list_add(&entry->item, &vdev->vpaths[i].mac_addr_list); | |
4377 | vdev->vpaths[i].mac_addr_cnt = 1; | |
4378 | } | |
4379 | ||
914d0d71 | 4380 | kfree(device_config); |
eb5f10c2 SH |
4381 | |
4382 | /* | |
4383 | * INTA is shared in multi-function mode. This is unlike the INTA | |
4384 | * implementation in MR mode, where each VH has its own INTA message. | |
4385 | * - INTA is masked (disabled) as long as at least one function sets | |
4386 | * its TITAN_MASK_ALL_INT.ALARM bit. | |
4387 | * - INTA is unmasked (enabled) when all enabled functions have cleared | |
4388 | * their own TITAN_MASK_ALL_INT.ALARM bit. | |
4389 | * The TITAN_MASK_ALL_INT ALARM & TRAFFIC bits are cleared on power up. | |
4390 | * Though this driver leaves the top level interrupts unmasked while | |
4391 | * leaving the required module interrupt bits masked on exit, there | |
4392 | * could be a rougue driver around that does not follow this procedure | |
4393 | * resulting in a failure to generate interrupts. The following code is | |
4394 | * present to prevent such a failure. | |
4395 | */ | |
4396 | ||
4397 | if (ll_config.device_hw_info.function_mode == | |
4398 | VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION) | |
4399 | if (vdev->config.intr_type == INTA) | |
4400 | vxge_hw_device_unmask_all(hldev); | |
4401 | ||
703da5a1 RV |
4402 | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d Exiting...", |
4403 | vdev->ndev->name, __func__, __LINE__); | |
4404 | ||
4405 | vxge_hw_device_debug_set(hldev, VXGE_ERR, VXGE_COMPONENT_LL); | |
4406 | VXGE_COPY_DEBUG_INFO_TO_LL(vdev, vxge_hw_device_error_level_get(hldev), | |
4407 | vxge_hw_device_trace_level_get(hldev)); | |
4408 | ||
4409 | return 0; | |
4410 | ||
7975d1ee | 4411 | _exit5: |
703da5a1 RV |
4412 | for (i = 0; i < vdev->no_of_vpath; i++) |
4413 | vxge_free_mac_add_list(&vdev->vpaths[i]); | |
4414 | ||
4415 | vxge_device_unregister(hldev); | |
7975d1ee | 4416 | _exit4: |
5dbc9011 | 4417 | pci_disable_sriov(pdev); |
703da5a1 | 4418 | vxge_hw_device_terminate(hldev); |
703da5a1 RV |
4419 | _exit3: |
4420 | iounmap(attr.bar0); | |
4421 | _exit2: | |
4422 | pci_release_regions(pdev); | |
4423 | _exit1: | |
4424 | pci_disable_device(pdev); | |
4425 | _exit0: | |
4426 | kfree(device_config); | |
4427 | driver_config->config_dev_cnt--; | |
4428 | pci_set_drvdata(pdev, NULL); | |
4429 | return ret; | |
4430 | } | |
4431 | ||
4432 | /** | |
4433 | * vxge_rem_nic - Free the PCI device | |
4434 | * @pdev: structure containing the PCI related information of the device. | |
4435 | * Description: This function is called by the Pci subsystem to release a | |
4436 | * PCI device and free up all resource held up by the device. | |
4437 | */ | |
4438 | static void __devexit | |
4439 | vxge_remove(struct pci_dev *pdev) | |
4440 | { | |
4441 | struct __vxge_hw_device *hldev; | |
4442 | struct vxgedev *vdev = NULL; | |
4443 | struct net_device *dev; | |
4444 | int i = 0; | |
4445 | #if ((VXGE_DEBUG_INIT & VXGE_DEBUG_MASK) || \ | |
4446 | (VXGE_DEBUG_ENTRYEXIT & VXGE_DEBUG_MASK)) | |
4447 | u32 level_trace; | |
4448 | #endif | |
4449 | ||
4450 | hldev = (struct __vxge_hw_device *) pci_get_drvdata(pdev); | |
4451 | ||
4452 | if (hldev == NULL) | |
4453 | return; | |
4454 | dev = hldev->ndev; | |
4455 | vdev = netdev_priv(dev); | |
4456 | ||
4457 | #if ((VXGE_DEBUG_INIT & VXGE_DEBUG_MASK) || \ | |
4458 | (VXGE_DEBUG_ENTRYEXIT & VXGE_DEBUG_MASK)) | |
4459 | level_trace = vdev->level_trace; | |
4460 | #endif | |
4461 | vxge_debug_entryexit(level_trace, | |
4462 | "%s:%d", __func__, __LINE__); | |
4463 | ||
4464 | vxge_debug_init(level_trace, | |
4465 | "%s : removing PCI device...", __func__); | |
4466 | vxge_device_unregister(hldev); | |
4467 | ||
4468 | for (i = 0; i < vdev->no_of_vpath; i++) { | |
4469 | vxge_free_mac_add_list(&vdev->vpaths[i]); | |
4470 | vdev->vpaths[i].mcast_addr_cnt = 0; | |
4471 | vdev->vpaths[i].mac_addr_cnt = 0; | |
4472 | } | |
4473 | ||
4474 | kfree(vdev->vpaths); | |
4475 | ||
4476 | iounmap(vdev->bar0); | |
703da5a1 | 4477 | |
5dbc9011 SS |
4478 | pci_disable_sriov(pdev); |
4479 | ||
703da5a1 RV |
4480 | /* we are safe to free it now */ |
4481 | free_netdev(dev); | |
4482 | ||
4483 | vxge_debug_init(level_trace, | |
4484 | "%s:%d Device unregistered", __func__, __LINE__); | |
4485 | ||
4486 | vxge_hw_device_terminate(hldev); | |
4487 | ||
4488 | pci_disable_device(pdev); | |
4489 | pci_release_regions(pdev); | |
4490 | pci_set_drvdata(pdev, NULL); | |
4491 | vxge_debug_entryexit(level_trace, | |
4492 | "%s:%d Exiting...", __func__, __LINE__); | |
4493 | } | |
4494 | ||
4495 | static struct pci_error_handlers vxge_err_handler = { | |
4496 | .error_detected = vxge_io_error_detected, | |
4497 | .slot_reset = vxge_io_slot_reset, | |
4498 | .resume = vxge_io_resume, | |
4499 | }; | |
4500 | ||
4501 | static struct pci_driver vxge_driver = { | |
4502 | .name = VXGE_DRIVER_NAME, | |
4503 | .id_table = vxge_id_table, | |
4504 | .probe = vxge_probe, | |
4505 | .remove = __devexit_p(vxge_remove), | |
4506 | #ifdef CONFIG_PM | |
4507 | .suspend = vxge_pm_suspend, | |
4508 | .resume = vxge_pm_resume, | |
4509 | #endif | |
4510 | .err_handler = &vxge_err_handler, | |
4511 | }; | |
4512 | ||
4513 | static int __init | |
4514 | vxge_starter(void) | |
4515 | { | |
4516 | int ret = 0; | |
4517 | char version[32]; | |
4518 | snprintf(version, 32, "%s", DRV_VERSION); | |
4519 | ||
7074b16c | 4520 | printk(KERN_INFO "%s: Copyright(c) 2002-2009 Neterion Inc\n", |
703da5a1 | 4521 | VXGE_DRIVER_NAME); |
7074b16c | 4522 | printk(KERN_INFO "%s: Driver version: %s\n", |
703da5a1 RV |
4523 | VXGE_DRIVER_NAME, version); |
4524 | ||
4525 | verify_bandwidth(); | |
4526 | ||
4527 | driver_config = kzalloc(sizeof(struct vxge_drv_config), GFP_KERNEL); | |
4528 | if (!driver_config) | |
4529 | return -ENOMEM; | |
4530 | ||
4531 | ret = pci_register_driver(&vxge_driver); | |
4532 | ||
4533 | if (driver_config->config_dev_cnt && | |
4534 | (driver_config->config_dev_cnt != driver_config->total_dev_cnt)) | |
4535 | vxge_debug_init(VXGE_ERR, | |
4536 | "%s: Configured %d of %d devices", | |
4537 | VXGE_DRIVER_NAME, driver_config->config_dev_cnt, | |
4538 | driver_config->total_dev_cnt); | |
4539 | ||
4540 | if (ret) | |
4541 | kfree(driver_config); | |
4542 | ||
4543 | return ret; | |
4544 | } | |
4545 | ||
4546 | static void __exit | |
4547 | vxge_closer(void) | |
4548 | { | |
4549 | pci_unregister_driver(&vxge_driver); | |
4550 | kfree(driver_config); | |
4551 | } | |
4552 | module_init(vxge_starter); | |
4553 | module_exit(vxge_closer); |